Manual Chapter : Common Elements for traffic classes

Applies To:

Show Versions Show Versions

BIG-IP DNS

  • 15.0.0, 14.1.0

BIG-IP PEM

  • 15.0.0, 14.1.0

BIG-IP AFM

  • 15.0.0, 14.1.0

BIG-IP Analytics

  • 15.0.0, 14.1.0

BIG-IP ASM

  • 15.0.0, 14.1.0

BIG-IP AAM

  • 15.0.0, 14.1.0

BIG-IP APM

  • 15.0.0, 14.1.0

BIG-IP LTM

  • 15.0.0, 14.1.0
Manual Chapter

Common Elements for traffic classes

  1. On the Main tab, click
    Local Traffic
    Traffic Class
    .
  2. Click the
    Create
    button.
  3. In the
    Name
    field, type a name for the traffic class.
    Traffic class names are case-sensitive and can contain letters, numbers, and underscores (_) only.
  4. In the
    Classification
    field, type a text string that the system applies to data flows that match the traffic-class criteria.
    When values from a traffic flow match the criteria specified on this screen, the system tags the traffic flow with this classification value.
  5. In the
    Source Address
    field, type an IP address for the system to match against incoming traffic.
  6. For the
    Source Mask
    field, type a network mask for the specified source address.
  7. For the
    Source Port
    setting, type a port number in the field or select a port name from the list.
    If you select a port name from the list, the system displays the corresponding port number in the text field.
  8. In the
    Destination Address
    field, type an IP address for the system to match against the traffic destination.
  9. For the
    Destination Mask
    field, type a network mask for the specified destination address.
  10. For the
    Destination Port
    setting, type a port number in the field or select a port name from the list.
    If you select a port name from the list, the system displays the corresponding port number in the text field.
  11. For the
    IP Protocol
    setting, type a protocol number in the field or select a protocol name from the list.
    If you select a protocol name from the list, the system displays the corresponding protocol number in the text field.
  12. Click the
    Finished
    button.