Manual Chapter : About route advertisement of virtual addresses

Applies To:

Show Versions Show Versions

BIG-IP AAM

  • 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP APM

  • 17.1.1, 17.1.0, 17.0.0, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP Analytics

  • 17.1.1, 17.1.0, 17.0.0, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP Link Controller

  • 17.1.1, 17.1.0, 17.0.0, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP LTM

  • 17.1.1, 17.1.0, 17.0.0, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP PEM

  • 17.1.1, 17.1.0, 17.0.0, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP AFM

  • 17.1.1, 17.1.0, 17.0.0, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP DNS

  • 17.1.1, 17.1.0, 17.0.0, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP ASM

  • 17.1.1, 17.1.0, 17.0.0, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.9, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0
Manual Chapter

About route advertisement of virtual addresses

Route advertisement
is the function that the BIG-IP® system performs when advertising a route for a virtual address to the Traffic Management Microkernel (TMM) routing table. You must configure route advertisement to ensure that the dynamic routing protocols propagate this route to other routers on the network.
The settings related to route advertisement that you can configure on a virtual address are:
Property
Description
Default Value
Availability Calculation
A setting that tells the BIG-IP system when to consider the virtual address available for advertisement to an advanced routing module. This setting only applies when the
Route Advertisement
setting is set to anything other than
Disabled
. Possible values are:
  • When any virtual server is available
  • When all virtual server(s) are available
  • Always
When any virtual server is available
ICMP Echo
A setting that enables, selectively enables, or disables responses to ICMP echo requests on a per-virtual address basis. When this setting is disabled, the BIG-IP system drops any ICMP echo request packets sent to virtual addresses, including standard statistics and logging. Note that the resulting behavior is affected by the value you configure for the
Availability Calculation
setting.
Enabled
Route Advertisement
A setting that inserts a route to this virtual address into the kernel routing table so that an advanced routing module can redistribute that route to other routers on the network. Possible values are:
Disabled
Does not advertise the route for the virtual address, regardless of the availability status
Enabled
Advertises the route for the available virtual address, based on the calculation method selected in the Availability Calculation list.
Always
Always advertises the route for the virtual address, regardless of availability status. This requires an enabled virtual address.
Selective
You can also selectively enable ICMP echo responses, which causes the BIG-IP system to internally enable or disable responses based on virtual server state: any virtual server, all virtual servers, or always, regardless of the state of any virtual server.
Any
Advertises the route for the virtual address when any virtual server is available.
All
Advertises the route for the virtual address when all virtual servers are available.
Disabled
After you configure the desired behavior of the system with respect to route advertisement, the
tmrouted
daemon attempts to comply. The daemon only succeeds in advertising the route for the virtual address when the relevant virtual servers, pool, and pool members collectively report their status in specific combinations.
When you configure RHI in a device group configuration, only devices with active traffic groups attempt to advertise routes to virtual addresses.