F5 Logo MyF5
Search
  1. MyF5 Home
  2. BIG-IP Access Policy Manager: Authentication Methods
  3. RSA SecurID Authentication
Manual Chapter : RSA SecurID Authentication

Applies To:

Show Versions Show Versions

BIG-IP APM

  • 14.1.5, 14.1.4
Manual Chapter

RSA SecurID Authentication

About RSA SecurID authentication

RSA SecurID is a two-factor authentication mechanism based on a one-time passcode (OTP) that is generated by using a token code provided by a software or hardware authenticator. Both BIG-IP® Edge Client® for Windows and OS X systems support the RSA SecurID feature.
A
token
 is a one-time authentication code generated every 60 seconds by an authenticator (hardware or software) assigned to the user.
How Access Policy Manager works with RSA SecurID
How RSA SecurID works
  1. Access Policy Manager displays the logon page to the user. The logon page accepts the username and PIN code provided by the user, requests the passcode from RSA Secure-ID Software Token software, and sends the username and passcode to Access Policy Manager.
  2. Access Policy Manager sends the user-specified inputs to the RSA authentication server.
  3. Based on the authentication results, Access Policy Manager grants or denies access to the client.

About SecurID configuration requirements for APM AAA

Before you can use a SecurID AAA server in Access Policy Manager (APM), you must configure specific elements and settings on RSA SecurID. To provide RSA SecurID authentication for APM, RSA Authentication Manager requires:
  • An authentication agent for APM in its database.
  • A RADIUS client that corresponds to the authentication agent for APM.
  • A SecurID token policy .
Authentication agent
To create an authentication agent from the RSA Security Console, you need to provide this information:
  • Hostname
  • IP addresses for all network interfaces
You must set Agent Type to Standard Agent.
RADIUS client
To create a RADIUS client from the RSA Security Console, you need to provide this information:
  • Hostname
  • IP addresses for all network interface
  • RADIUS secret (this RADIUS secret must match the corresponding RADIUS secret on the APM system).
Character requirements setting in a SecurID token policy
To avoid a problem in the RSA SDK with alphabetic-only PIN policies, do not use them. When you set up a SecurID token policy, set the character requirements to one of these values:
  • Require numeric PINs
  • Allow alpha-numeric PINs

About SecurID configuration requirements for high availability

For high availability to work with RSA SecurID, the same node secret is required on both members of the HA pair.
In addition, one of these configurations must be in place for IP addresses.
One alternative is to use a SNAT Pool on the BIG-IP system to force the same source IP address. For more information, see SOL15517: Specifying the source IP address used by BIG-IP APM AAA servers on the AskF5 web site located at
http://support.f5.com/
.
Instead of using a SNAT Pool on the BIG-IP system, both self IP addresses can be specified in the RSA host agent definition. The definition must include:
  • A floating IP address, created from the RSA server, for the host agent.
  • The static self IP addresses of the nodes defined as secondary nodes.
The Configuration file generated on the RSA server contains all three IP addresses, so the originating traffic from any of the sub-nodes will be accepted.

Task summary for configuring for RSA SecurID authentication

This task list includes all steps required to set up this configuration and provides an example access policy that uses both RSA SecurID and Active Directory authentication. It is only an example. If you are adding RSA SecurID authentication to an existing access policy, you do not need to create another access profile.

Task list

Configuring a SecurID AAA server in APM

Configure a SecurID AAA server for Access Policy Manager (APM) to request RSA SecurID authentication from an RSA Manager authentication server.
  1. On the Main tab, click
    Access
    Authentication
    .
    The Authentication screen opens.
  2. On the menu bar, click
    AAA Servers By Type
    , and select
    SecurID
    .
    The SecurID screen opens and displays the servers list.
  3. Click
    Create
    .
    The New Server properties screen opens.
  4. In the
    Name
     field, type a unique name for the authentication server.
  5. In the Configuration area, for the
    Agent Host IP Address (must match the IP address in SecurID Configuration File)
     setting, select an option as appropriate:
    • Select from Self IP List
      : Choose this when there is no NAT device between APM and the RSA Authentication Manager. Select an IP from the list of those configured on the BIG-IP system (in the Network area of the Configuration utility).
    • Other
      : Choose this when there is a NAT device in the network path between Access Policy Manager and the RSA Authentication Manager server. If selected, type the address as translated by the NAT device.
    This setting does not change the source IP address of the packets that are sent to the RSA SecurID server. (Layer 3 source addresses remain unchanged.) The agent host IP address is used only in Layer 7 (application layer) information that is sent to the RSA SecurID server.
  6. For the
    SecurID Configuration File
     setting, browse to upload the
    sdconf.rec
     file.
    Consult your RSA Authentication Manager administrator to generate this file for you.
  7. Click
    Finished
    .
    The new server displays on the list.
This adds a new RSA SecurID server to the AAA Servers list.

Creating an access profile

You create an access profile to provide the access policy configuration for a virtual server that establishes a secured session.
  1. On the Main tab, click
    Access
    Profiles / Policies
    .
    The Access Profiles (Per-Session Policies) screen opens.
  2. Click
    Create
    .
    The New Profile screen opens.
  3. In the
    Name
     field, type a name for the access profile.
    A access profile name must be unique among all access profile and any per-request policy names.
  4. From the
    Profile Type
     list, select one these options:
    • LTM-APM
      : Select for a web access management configuration.
    • SSL-VPN
      : Select to configure network access, portal access, or application access. (Most access policy items are available for this type.)
    • ALL
      : Select to support LTM-APM and SSL-VPN access types.
    • SSO
      : Select to configure matching virtual servers for Single Sign-On (SSO).
      No access policy is associated with this type of access profile
    • RDG-RAP
      : Select to validate connections to hosts behind APM when APM acts as a gateway for RDP clients.
    • SWG - Explicit
      : Select to configure access using Secure Web Gateway explicit forward proxy.
    • SWG - Transparent
      : Select to configure access using Secure Web Gateway transparent forward proxy.
    • System Authentication
      : Select to configure administrator access to the BIG-IP system (when using APM as a pluggable authentication module).
    • Identity Service
      : Used internally to provide identity service for a supported integration. Only APM creates this type of profile.
      You can edit Identity Service profile properties.
    Depending on licensing, you might not see all of these profile types.
    Additional settings display.
  5. In the Language Settings area, add and remove accepted languages, and set the default language.
    A browser uses the highest priority accepted language. If no browser language matches the accepted languages list, the browser uses the default language.
  6. Click
    Finished
    .
The access profile displays in the Access Profiles List. Default-log-setting is assigned to the access profile.

Verifying log settings for the access profile

Confirm that the correct log settings are selected for the access profile to ensure that events are logged as you intend.
Log settings are configured in the
Access
Overview
Event Log
Settings
area of the product. They enable and disable logging for access system and URL request filtering events. Log settings also specify log publishers that send log messages to specified destinations.
  1. On the Main tab, click
    Access
    Profiles / Policies
    .
    The Access Profiles (Per-Session Policies) screen opens.
  2. Click the name of the access profile that you want to edit.
    The properties screen opens.
  3. On the menu bar, click
    Logs
    .
    The access profile log settings display.
  4. Move log settings between the
    Available
     and
    Selected
     lists.
    You can assign up to three log settings that enable access system logging to an access profile. You can assign additional log settings to an access profile provided that they enable logging for URl request logging only.
    Logging is disabled when the
    Selected
     list is empty.
  5. Click
    Update
    .
An access profile is in effect when it is assigned to a virtual server.

Configuring RSA SecurID authentication in an access policy

Before you add RSA SecurID authentication to an access policy, you must have at least one AAA SecurID server configured in Access Policy Manager (APM). You must also create a configuration file on the RSA SecurID console side to connect a BIG-IP system to an RSA server. You might need an AAA server configured for another type of authentication, depending on the number of authentication actions that you plan to add to this access policy.
You add RSA SecurID authentication to an access policy so that APM can request RSA SecurID authentication using the AAA SecurID server that you specify.
  1. On the Main tab, click
    Access
    Profiles / Policies
    .
    The Access Profiles (Per-Session Policies) screen opens.
  2. In the Per-Session Policy column, click the
    Edit
     link for the access profile you want to configure.
    The visual policy editor opens the access policy in a separate screen.
  3. Click the
    (+)
     icon anywhere in the access policy to add a new item.
    Only an applicable subset of access policy items is available for selection in the visual policy editor for any access profile type.
    A popup screen opens, listing predefined actions on tabs such as General Purpose, Authentication, and so on.
  4. On the Logon tab, select
    Logon Page
     and click the
    Add Item
     button.
    The Logon Page Agent properties screen opens.
  5. Click
    Save
    .
    The properties screen closes and the policy displays.
  6. Click the
    (+)
     icon anywhere in the access policy to add a new item.
    Only an applicable subset of access policy items is available for selection in the visual policy editor for any access profile type.
    A popup screen opens, listing predefined actions on tabs such as General Purpose, Authentication, and so on.
  7. On the Authentication tab, select
    RSA SecurID
     and click
    Add Item
    .
    A properties popup screen opens.
  8. From the
    AAA Server
     list in the properties popup screen, select the SecurID AAA server that you want to associate to the agent.
  9. Set
    Max Logon Attempts
     to a value from 1 to 5.
  10. From BIG-IP v14.0 onwards, you can use username and password source fields to add custom session variables. In the
    Username Source
     field, specify the session variable name from which RSA SecurID Auth agent should read the username. The default value is
    session.logon.last.username
    .
  11. In the
    Password Source
     field, specify the session variable name from which RSA SecurID Auth agent should read the password. The default value is
    session.logon.last.password
    .
  12. Click
    Save
    .
    The properties screen closes and the policy displays.
  13. Click the
    (+)
     icon anywhere in the access policy to add a new item.
    Only an applicable subset of access policy items is available for selection in the visual policy editor for any access profile type.
    A popup screen opens, listing predefined actions on tabs such as General Purpose, Authentication, and so on.
  14. On the Assignment tab, select
    Resource Assign
     and click
    Add Item
    .
    A properties popup screen opens.
  15. From the Network Access list in the properties popup screen, select the network connection for your remote connection.
  16. Click
    Save
    .
    The properties screen closes and the policy displays.
  17. Add any other actions you require.
  18. Click
    Apply Access Policy
     to save your configuration.
This adds RSA SecurID AAA authentication to the access policy.

Creating a virtual server for an access policy

When creating a virtual server for an access policy, specify an IP address for a single host as the destination address.
  1. On the Main tab, click
    Local Traffic
    Virtual Servers
    .
    The Virtual Server List screen opens.
  2. Click
    Create
    .
    The New Virtual Server screen opens.
  3. In the
    Name
     field, type a unique name for the virtual server.
  4. In the
    Destination Address
     field, type the IP address for a host virtual server.
    This field accepts an address in CIDR format (IP address/prefix). However, when you type the complete IP address for a host, you do not need to type a prefix after the address.
  5. In the
    Service Port
     field:
    • If you want to specify a single service port or all ports, confirm that the
      Port
       button is selected, and type or select a service port.
    • If you want to specify multiple ports other than all ports, select the
      Port List
       button, and confirm that the port list that you previously created appears in the box.
  6. From the
    HTTP Profile (Client)
     list, select a previously-created HTTP/2 profile for client-side traffic.
  7. If you use server SSL for this connection, from the
    SSL Profile (Server)
     list, select a server SSL profile.
  8. If you use client SSL for this profile, from the
    SSL Profile (Client)
     list, select a client SSL profile.
  9. In the Access Policy area, from the
    Access Profile
     list, select the access profile that you configured earlier.
  10. From the
    Connectivity Profile
     list, select a connectivity profile.
    You can select the default connectivity profile,
    connectivity
     if you have not defined a specific profile for the traffic that is directed to this virtual server.
  11. Click
    Finished
    .
You have configured a host virtual server and associated an access profile with it.

Access policy example for RSA and AD authentication

Typically, when you configure an authentication action, you precede it with a Logon Page action to collect credentials. This example describes how to include more than one authentication item (RSA and AD authentication) in an access policy and present a Logon Page only once.

Access policy with RSA SecurID and AD Auth actions

The RSA SecurID action accepts a user name and a token at logon, while Active Directory accepts a user name and password. To accommodate these differences, customize the Logon Page item. In this example, you customize the Logon Page action to collect the password for the AD Auth action, and the token for the RSA SecurID action.
On the logon page, configure the password settings for the fields as in the following example.

L

The first highlighted entry is configured as a password with the post variable name
token
 and the session variable name
token
. The Logon Page Input Fields are also customized to indicate that Logon Page Input Field #2 is an
RSA Token
, and Logon Page Input Field #3 is a
Password
.
The highlighted entries in the Customization area change the labels that the Logon Page displays, from Password to
RSA Token Code
 for the first password and to
AD Password
 for the second password.

Configuring the session variables to map to the Logon Page action

In the RSA SecurID action, you can configure the token session variable. In the Password Source field, change the password source to
session.logon.last.token
.
The AD Auth action automatically uses
session.logon.last.password
.
The Logon Page action now correctly captures the password for AD Auth and the Token for RSA SecurID.

RSA SecurID session variables for access policy rules

When the RSA SecurID access policy item runs, it populates session variables which are then available for use in access policy rules. The tables list the session variables for the RSA SecurID access policy item and a logon access policy item.

Session variables for RSA SecurID

Session Variable
Description
session.securid.last.result
Provides the result of the RSA SecurID authentication. The available values are:
  • 0: Failed
  • 1: Passed

Common session variables

Session Variable
Description
session.logon.last.username
Provides user credentials. The
username
 string is stored after encrypting, using the system's client key.
session.logon.last.password
Provides user credentials. The
password
 string is stored after encrypting, using the system's client key.

RSA SecurID on Windows using RADIUS configuration troubleshooting tips

You might run into problems with RSA SecurID on Windows using RADIUS configuration. Follow these tips to try to resolve any issues that you encounter.

RSA SecurID on Windows using RADIUS configuration troubleshooting

Possible error messages
Possible explanations and corrective actions
The RADIUS server is inactive
Even if the RADIUS server was started from the SecurID options window on the Windows SecurID server, the server might not be active. In Windows Services Manager, make sure that the server is set to start each time the server boots, and is currently running. RSA SecurID authentication using RADIUS takes place on a different port than the native securid ID.
The SecurID is configured incorrectly for RADIUS authentication
While using RSA SecurID over RADIUS, the SecurID server is a client of itself. The RADIUS service functions as a standalone process, and if the SecurID server is not set up as a client of itself, it rejects the Access Policy Manager authentication request and does not store anything in the logs.
No response from the RSA SecurID server
Check that RSA Authentication Manager is configured properly. To facilitate communication between Access Policy Manager and the RSA Authentication Manager, you must add an Authentication Agent record to the RSA Authentication Manager database. The Authentication Agent record identifies the Access Policy Manager within its database, and contains information about communication and encryption. To create the Authentication Agent record, you need this information.
  • Host name
  • IP addresses for all network interfaces
When adding the Authentication Agent record, you should configure the Access Policy Manager as a Standard Agent. The RSA Authentication Manager uses this setting to determine how to communicate with Access Policy Manager. You must also add a RADIUS client that corresponds to the Authentication Agent. To create the RADIUS client, you need this information.
  • Host name
  • IP addresses for all network interfaces
  • RADIUS secret (This RADIUS secret must match the corresponding RADIUS secret on the Access Policy Manager.)

About BIG-IP Edge Client RSA SecurID authentication

RSA SecurID is a two-factor authentication mechanism based on a one-time passcode (OTP) that is generated by using a token code provided by a software or hardware authenticator. Both BIG-IP Edge Client for Windows and OS X systems support the RSA SecurID feature.
A
token
 is a one-time authentication code generated every 60 seconds by an authenticator (hardware or software) assigned to the user.
How Access Policy Manager works with RSA SecurID
How RSA SecurID works
  1. Access Policy Manager displays the logon page to the user. The logon page accepts the username and PIN code provided by the user, requests the passcode from RSA Secure-ID Software Token software, and sends the username and passcode to Access Policy Manager.
  2. Access Policy Manager sends the user-specified inputs to the RSA authentication server.
  3. Based on the authentication results, Access Policy Manager grants or denies access to the client.

About RSA SecurID (with soft token) automation requirements

For BIG-IP® Edge Client ® for Windows or BIG-IP Edge Client for Mac to support RSA SecurID (with soft token) automation, RSA SecurID must be configured for pin plus tokencode.

Task summary for configuring for RSA SecurID integration with APM

This task list includes all steps required to set up this configuration, and provides an example access policy that uses RSA SecurID authentication for F5 BIG-IP® Edge Client®. It is only an example. If you are adding RSA SecurID authentication to an existing access policy, you do not need to create another access profile.

Task list

Configuring a SecurID AAA server in APM

Configure a SecurID AAA server for Access Policy Manager (APM) to request RSA SecurID authentication from an RSA Manager authentication server.
  1. On the Main tab, click
    Access
    Authentication
    .
    The Authentication screen opens.
  2. On the menu bar, click
    AAA Servers By Type
    , and select
    SecurID
    .
    The SecurID screen opens and displays the servers list.
  3. Click
    Create
    .
    The New Server properties screen opens.
  4. In the
    Name
     field, type a unique name for the authentication server.
  5. In the Configuration area, for the
    Agent Host IP Address (must match the IP address in SecurID Configuration File)
     setting, select an option as appropriate:
    • Select from Self IP List
      : Choose this when there is no NAT device between APM and the RSA Authentication Manager. Select an IP from the list of those configured on the BIG-IP system (in the Network area of the Configuration utility).
    • Other
      : Choose this when there is a NAT device in the network path between Access Policy Manager and the RSA Authentication Manager server. If selected, type the address as translated by the NAT device.
    This setting does not change the source IP address of the packets that are sent to the RSA SecurID server. (Layer 3 source addresses remain unchanged.) The agent host IP address is used only in Layer 7 (application layer) information that is sent to the RSA SecurID server.
  6. For the
    SecurID Configuration File
     setting, browse to upload the
    sdconf.rec
     file.
    Consult your RSA Authentication Manager administrator to generate this file for you.
  7. Click
    Finished
    .
    The new server displays on the list.
This adds a new RSA SecurID server to the AAA Servers list.

Creating an access profile

You create an access profile to provide the access policy configuration for a virtual server that establishes a secured session.
  1. On the Main tab, click
    Access
    Profiles / Policies
    .
    The Access Profiles (Per-Session Policies) screen opens.
  2. Click
    Create
    .
    The New Profile screen opens.
  3. In the
    Name
     field, type a name for the access profile.
    A access profile name must be unique among all access profile and any per-request policy names.
  4. From the
    Profile Type
     list, select
    SSL-VPN
    .
    Additional settings display.
  5. From the
    Profile Scope
     list, retain the default value or select another.
    • Profile
      : Gives a user access only to resources that are behind the same access profile. This is the default value.
    • Virtual Server
      : Gives a user access only to resources that are behind the same virtual server.
    • Global
      : Gives a user access to resources behind any access profile that has global scope.
  6. To configure timeout and session settings, select the
    Custom
     check box.
  7. In the
    Inactivity Timeout
     field, type the number of seconds that should pass before the access policy times out. Type
    0
     to set no timeout.
    If there is no activity (defined by the
    Session Update Threshold
     and
    Session Update Window
     settings in the Network Access configuration) between the client and server within the specified threshold time, the system closes the current session.
  8. In the
    Access Policy Timeout
     field, type the number of seconds that should pass before the access profile times out because of inactivity.
    Type
    0
     to set no timeout.
  9. In the
    Maximum Session Timeout
     field, type the maximum number of seconds the session can exist.
    Type
    0
     to set no timeout.
  10. In the
    Max Concurrent Users
     field, type the maximum number of users that can use this access profile at the same time.
    Type
    0
     to set no maximum.
  11. In the
    Max Sessions Per User
     field, type the maximum number of concurrent sessions that one user can start.
    Type
    0
     to set no maximum.
    Only a user in the administrator, application editor, manager, or resource administrator role has access to this field.
  12. In the
    Max In Progress Sessions Per Client IP
     field, type the maximum number of concurrent sessions that can be in progress for a client IP address.
    When setting this value, take into account whether users will come from a NAT-ed or proxied client address and, if so, consider increasing the value accordingly. The default value is 128.
    Only a user in the administrator, application editor, manager, or resource administrator role has access to this field.
    F5 does not recommend setting this value to
    0
     (unlimited).
  13. Select the
    Restrict to Single Client IP
     check box to restrict the current session to a single IP address.
    This setting associates the session ID with the IP address.
    Only a user in the administrator, application editor, manager, or resource administrator role has access to this field.
    Upon a request to the session, if the IP address has changed the request is redirected to a logout page, the session ID is deleted, and a log entry is written to indicate that a session hijacking attempt was detected. If such a redirect is not possible, the request is denied and the same events occur.
  14. To configure logout URIs, in the Configurations area, type each logout URI in the
    URI
     field, and then click
    Add
    .
  15. In the
    Logout URI Timeout
     field, type the delay in seconds before logout occurs for the customized logout URIs defined in the
    Logout URI Include
     list.
  16. To configure SSO:
    • For users to log in to multiple domains using one SSO configuration, skip the settings in the SSO Across Authentication Domains (Single Domain mode) area. You can configure SSO for multiple domains only after you finish the initial access profile configuration.
    • For users to log in to a single domain using an SSO configuration, configure settings in the SSO Across Authentication Domains (Single Domain mode) area, or you can configure SSO settings after you finish the initial access profile configuration.
  17. In the
    Domain Cookie
     field, specify a domain cookie, if the application access control connection uses a cookie.
  18. In the
    Cookie Options
     setting, specify whether to use a secure cookie.
    • If the policy requires a secure cookie, select the
      Secure
       check box to add the
      secure
       keyword to the session cookie.
    • If you are configuring an LTM access scenario that uses an HTTPS virtual server to authenticate the user and then sends the user to an existing HTTP virtual server to use applications, clear this check box.
  19. If the access policy requires a persistent cookie, in the
    Cookie Options
     setting, select the
    Persistent
     check box.
    This sets cookies if the session does not have a webtop. When the session is first established, session cookies are not marked as persistent; but when the first response is sent to the client after the access policy completes successfully, the cookies are marked persistent. Persistent cookies are updated for the expiration timeout every 60 seconds. The timeout is equal to session inactivity timeout. If the session inactivity timeout is overwritten in the access policy, the overwritten value will be used to set the persistent cookie expiration.
  20. From the
    SSO Configurations
     list, select an SSO configuration.
  21. In the Language Settings area, add and remove accepted languages, and set the default language.
    A browser uses the highest priority accepted language. If no browser language matches the accepted languages list, the browser uses the default language.
  22. Click
    Finished
    .
The access profile displays in the Access Profiles List. Default-log-setting is assigned to the access profile.
To add an SSO configuration for multiple domains, click
SSO / Auth Domains
 on the menu bar. To provide functionality with an access profile, you must configure the access policy. The default access policy for a profile denies all traffic and contains no actions. Click
Edit
 in the
Access Policy
 column to edit the access policy.

Verifying log settings for the access profile

Confirm that the correct log settings are selected for the access profile to ensure that events are logged as you intend.
Log settings are configured in the
Access
Overview
Event Log
Settings
area of the product. They enable and disable logging for access system and URL request filtering events. Log settings also specify log publishers that send log messages to specified destinations.
  1. On the Main tab, click
    Access
    Profiles / Policies
    .
    The Access Profiles (Per-Session Policies) screen opens.
  2. Click the name of the access profile that you want to edit.
    The properties screen opens.
  3. On the menu bar, click
    Logs
    .
    The access profile log settings display.
  4. Move log settings between the
    Available
     and
    Selected
     lists.
    You can assign up to three log settings that enable access system logging to an access profile. You can assign additional log settings to an access profile provided that they enable logging for URl request logging only.
    Logging is disabled when the
    Selected
     list is empty.
  5. Click
    Update
    .
An access profile is in effect when it is assigned to a virtual server.

Configuring RSA SecurID authentication in an access policy

Before you add RSA SecurID authentication to an access policy, you must have at least one AAA SecurID server configured in Access Policy Manager (APM). You must also create a configuration file on the RSA SecurID console side to connect a BIG-IP system to an RSA server. You might need an AAA server configured for another type of authentication, depending on the number of authentication actions that you plan to add to this access policy.
You add RSA SecurID authentication to an access policy so that APM can request RSA SecurID authentication using the AAA SecurID server that you specify.
  1. On the Main tab, click
    Access
    Profiles / Policies
    .
    The Access Profiles (Per-Session Policies) screen opens.
  2. In the Per-Session Policy column, click the
    Edit
     link for the access profile you want to configure.
    The visual policy editor opens the access policy in a separate screen.
  3. Click the
    (+)
     icon anywhere in the access policy to add a new item.
    Only an applicable subset of access policy items is available for selection in the visual policy editor for any access profile type.
    A popup screen opens, listing predefined actions on tabs such as General Purpose, Authentication, and so on.
  4. On the Logon tab, select
    Logon Page
     and click the
    Add Item
     button.
    The Logon Page Agent properties screen opens.
  5. Click
    Save
    .
    The properties screen closes and the policy displays.
  6. Click the
    (+)
     icon anywhere in the access policy to add a new item.
    Only an applicable subset of access policy items is available for selection in the visual policy editor for any access profile type.
    A popup screen opens, listing predefined actions on tabs such as General Purpose, Authentication, and so on.
  7. On the Authentication tab, select
    RSA SecurID
     and click
    Add Item
    .
    A properties popup screen opens.
  8. From the
    AAA Server
     list in the properties popup screen, select the SecurID AAA server that you want to associate to the agent.
  9. Set
    Max Logon Attempts
     to a value from 1 to 5.
  10. From BIG-IP v14.0 onwards, you can use username and password source fields to add custom session variables. In the
    Username Source
     field, specify the session variable name from which RSA SecurID Auth agent should read the username. The default value is
    session.logon.last.username
    .
  11. In the
    Password Source
     field, specify the session variable name from which RSA SecurID Auth agent should read the password. The default value is
    session.logon.last.password
    .
  12. Click
    Save
    .
    The properties screen closes and the policy displays.
  13. Click the
    (+)
     icon anywhere in the access policy to add a new item.
    Only an applicable subset of access policy items is available for selection in the visual policy editor for any access profile type.
    A popup screen opens, listing predefined actions on tabs such as General Purpose, Authentication, and so on.
  14. On the Assignment tab, select
    Resource Assign
     and click
    Add Item
    .
    A properties popup screen opens.
  15. From the Network Access list in the properties popup screen, select the network connection for your remote connection.
  16. Click
    Save
    .
    The properties screen closes and the policy displays.
  17. Add any other actions you require.
  18. Click
    Apply Access Policy
     to save your configuration.
This adds RSA SecurID AAA authentication to the access policy.

Creating a virtual server for an access policy

When creating a virtual server for an access policy, specify an IP address for a single host as the destination address.
  1. On the Main tab, click
    Local Traffic
    Virtual Servers
    .
    The Virtual Server List screen opens.
  2. Click
    Create
    .
    The New Virtual Server screen opens.
  3. In the
    Name
     field, type a unique name for the virtual server.
  4. In the
    Destination Address
     field, type the IP address for a host virtual server.
    This field accepts an address in CIDR format (IP address/prefix). However, when you type the complete IP address for a host, you do not need to type a prefix after the address.
  5. In the
    Service Port
     field:
    • If you want to specify a single service port or all ports, confirm that the
      Port
       button is selected, and type or select a service port.
    • If you want to specify multiple ports other than all ports, select the
      Port List
       button, and confirm that the port list that you previously created appears in the box.
  6. From the
    HTTP Profile (Client)
     list, select a previously-created HTTP/2 profile for client-side traffic.
  7. If you use server SSL for this connection, from the
    SSL Profile (Server)
     list, select a server SSL profile.
  8. If you use client SSL for this profile, from the
    SSL Profile (Client)
     list, select a client SSL profile.
  9. In the Access Policy area, from the
    Access Profile
     list, select the access profile that you configured earlier.
  10. From the
    Connectivity Profile
     list, select a connectivity profile.
    You can select the default connectivity profile,
    connectivity
     if you have not defined a specific profile for the traffic that is directed to this virtual server.
  11. Click
    Finished
    .
You have configured a host virtual server and associated an access profile with it.

Access policy example for RSA SecurID software token integration

Typically, when you configure an authentication action, you precede it with a Logon Page action to collect credentials. This example describes how to include RSA SecurID integration in an access policy.

Access policy with RSA SecurID action

Access policy with: Logon Page, RSA SecurID, Variable Assign, AD Auth, and Full Reosource Assign actions

Variable Assign action

Use the Variable Assign action to provide the appropriate password before the Logon Page action occurs.
Variable Assign access policy item popup screen for adding a new entry
The Variable Assign action stores the text
password
 in the custom variable,
session.logon.page.softToken.fieldId
;
password
 is the name of the field that is used for RSA token authentication.
Contact Support Contact Support

Have a Question?

Support and Sales >

About F5

Education

F5 Sites

Support Tasks




©2023 F5, Inc. All rights reserved.


Trademarks Policies Privacy California Privacy Do Not Sell My Personal Information