Manual Chapter : Common Elements for the network access in Access Policy Manager

Applies To:

Show Versions Show Versions

BIG-IP APM

  • 15.0.1, 15.0.0
Manual Chapter

Common Elements for the network access in Access Policy Manager

You must create a Network Access resource, or open an existing resource, before you can perform this task.
  1. On the Main tab, click
    Access
    Connectivity / VPN
    Network Access (VPN)
    Network Access Lists
    .
    The Network Access Lists screen opens.
  2. On the Main tab, click
    Access
    Connectivity / VPN
    Network Access (VPN)
    Lease Pools
    .
    The Network Access Lease Pools list screen opens.
  3. On the Main tab, click
    Access
    Connectivity / VPN
    Network Access (VPN)
    IPv4 Lease Pools
    .
    The Network Access IPv4 Lease Pools list screen opens.
  4. On the Main tab, click
    Access
    Connectivity / VPN
    Network Access (VPN)
    IPv6 Lease Pools
    .
    The Network Access IPv6 Lease Pools list screen opens.
  5. On the Main tab, click
    Wizards
    Device Wizards
    .
    The Device Wizards screen opens.
  6. To ensure that Edge Apps can connect from supported mobile devices, for
    Client Side Checks
    , clear the
    Enable Antivirus Check in Access Policy
    check box.
    Follow the instructions in the wizard to create your access policy and virtual server.
  7. Click the
    Create
    button.
    The New Resource screen opens.
  8. In the
    Name
    field, type a name for the resource.
  9. In the Name column, click the name of the network access resource you want to edit.
  10. Click the
    Finished
    button.
    The Network Access configuration screen opens, and you can configure the properties for the network access resource.
  11. Click the name to select a network access resource on the Resource List.
    The Network Access editing screen opens.
  12. To configure the general properties for the network resource, click
    Properties
    on the menu bar.
  13. To configure the network settings for the network access resource, click
    Network Settings
    on the menu bar.
  14. To configure optimization for a host with the network access resource, click
    Optimization
    on the menu bar.
  15. To configure DNS and hosts settings for the network access resource, click
    DNS/Hosts
    on the menu bar.
  16. To configure the drive mappings for the network access resource, click
    Drive Mappings
    on the menu bar.
  17. To configure applications to start for clients that establish a Network Access connection with this resource, click
    Launch Applications
    on the menu bar.
  18. To customize the network access connection, click
    Customization
    on the menu bar.
  19. In the Customization Settings for English area, in the
    Caption
    field, type a caption.
    The caption appears on the full webtop, and is required.
  20. To automatically start this network access resource when a client reaches a webtop to which the resource is assigned, select the
    Auto launch
    check box.
    When multiple network access resources are assigned to a webtop, Auto launch can be enabled for only one network access resource.
  21. Click the
    Update
    button.
    Your changes are saved and the page refreshes.