F5 Logo MyF5
Search
  1. MyF5 Home
  2. BIG-IP Local Traffic Manager: Implementations
  3. Configuring the BIG-IP System as a Reverse Proxy Server
Manual Chapter : Configuring the BIG-IP System as a Reverse Proxy Server

Applies To:

Show Versions Show Versions

BIG-IP AAM

  • 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP APM

  • 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP Analytics

  • 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP Link Controller

  • 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP LTM

  • 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP PEM

  • 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP AFM

  • 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP DNS

  • 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP ASM

  • 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0
Manual Chapter

Configuring the BIG-IP System as a Reverse Proxy Server

Overview: URI translation and HTML content modification

For environments that use web servers, you might want your websites to appear differently on the external network than on the internal network. For example, you might want the BIG-IP system to send traffic destined for
http://www.siterequest.com/
 to the internal server
http://appserver1.siterequest.com/
 instead. Normally, this translation could cause some issues, such as the web server expecting to see a certain host name (such as for name-based virtual hosting) or the web server using the internal host name and/or path when sending a redirect to client systems. Fortunately, you can configure the BIG-IP system to solve these problems.
You can also configure the BIG-IP system to modify HTML content as needed after the system has performed the URI translation.
This implementation describes an example of URI translation and HTML content modification and then provides the tasks to implement this example.

About URI translation

You can configure the BIG-IP system to perform URI translation on HTTP requests. Suppose that a company named
Siterequest
 has a website
www.siterequest.com
, which has a public IP address and a registered DNS entry, and therefore can be accessed from anywhere on the Internet.
Furthermore, suppose that
Siterequest
 has two application servers with private IP addresses and unregistered DNS entries, inside the company's firewall. The application servers are visible within the internal network as
appserver1.siterequest.com
 and
appserver2.siterequest.com
.
Because these servers have no public DNS entries, any client system that tries to access one of these servers from outside the company network receives a
no such host
 error.
As the illustration shows, you can prevent this problem by configuring the BIG-IP system to act as a reverse proxy server:
The BIG-IP system as a reverse proxy server for URI translation
The BIG-IP system as a reverse proxy server
In the example, the company
Siterequest
 has decided to enable Web access to the internal application servers, without exposing them to the Internet directly. Instead, the company has integrated the servers with the web server
siterequest.com
 so that
http://www.siterequest.com/sales
 is mapped internally to
http://appserver1.siterequest.com/sales
, and
http://siterequest.com/marketing
 is mapped internally to
http://appserver2.example.com/marketing
. This is a typical reverse-proxy configuration.
To configure the BIG-IP system to perform this translation, you create a Rewrite profile and configure one or more URI rules. A
URI rule
 specifies the particular URI translation that you want the BIG-IP system to perform. Specifically, a URI rule translates the scheme, host, port, or path of any client URI, server URI, or both. A URI rule also translates any domain and path information in the
Set-Cookie
 header of the response when that header information matches the information in the URI rule.
The Rewrite profile supports HTML and CSS content types only. To specify MIME types for HTML content, you can either create an HTML profile or accept the default values that the Rewrite profile uses,
text/html
 and
text/xhtml
. For CSS content, only the
text/css
 MIME type is supported.

Rules for matching requests to URI rules

The BIG-IP system follows these rules when attempting to match a request to a URI rule:
  • A request does not need to match any entry. That is, if no entries match and there is no catch-all entry, then the Rewrite profile has no effect.
  • Each request matches one entry only, which is the entry with the most specific host and path.
  • If multiple entries match, then the BIG-IP system uses the entry with the deepest path name on the left side of the specified mapping.
  • The BIG-IP system matches those requests that contain host names in URIs before matching requests that do not contain host names in URIs.
  • The BIG-IP system processes the specified entries in the mapping from most-specific to least-specific, regardless of the order specified in the actual Rewrite profile.

About URI Rules

When creating a URI rule, you must specify the client and server URIs in these ways:
  • When the URI is a path prefix only, the path must be preceded by and followed by a
    /
    , for example,
    /sales/
    .
  • When the URI contains more than the path prefix (such as, a host), the URI must also contain a scheme and must be followed by a
    /
    , for example,
    http://www.siterequest/sales/
    .

Introduction to HTML content modification

When you configure an HTML profile on the BIG-IP system, the system can modify HTML content that passes through the system, according to your specifications. For example, if you want the BIG-IP system to detect all content of type
text/html
 and then remove all instances of the HTML
img
 tag with the
src
 attribute, you can configure an HTML profile accordingly, and assign it to the virtual server. The HTML profile ensures that the BIG-IP system removes those instances of the tag from any HTML content that passes through the virtual server.
Or, you can configure an HTML profile to match on a certain tag and attribute in HTML content when a particular iRule event is triggered, and then create an iRule that includes a command to replace the value of the matched attribute with a different attribute. The BIG-IP system includes several iRule commands that you can use when the
Raise Event on Comment
 or
Raise Event on Tag
 events are triggered. For more information on iRule commands related to HTML content modification, see the F5 Networks web site
http://devcentral.f5.com
.
HTML tag removal and replacement are just two of several HTML rules that you can configure to manipulate HTML content. An
HTML rule
 defines the specific actions that you want the BIG-IP system to perform on a specified type HTML content.

Task summary for configuring system as reverse proxy server

The first step to configuring the BIG-IP system to act as a reverse proxy server is to create a Rewrite type of profile on the BIG-IP system and associate it with a virtual server. Note that each virtual server must have an HTTP profile. The Rewrite profile is designed for HTTP sites, as well as HTTPS sites where SSL is terminated on the BIG-IP system (that is, the virtual server references a Client SSL profile).

Creating a Rewrite profile to specify URI rules

To configure the BIG-IP system to perform URI translation, you create a
Rewrite profile
, specifying one or more URI rules that associate a client-side path with a server-side URI. You also specify whether you want the URI translation to pertain to HTTP requests, responses, or both.
The Rewrite profile supports HTML and CSS content types only. To specify MIME types for HTML content, you can either create an HTML profile or accept the default values that the Rewrite profile uses,
text/html
 and
text/xhtml
. For CSS content, only the
text/css
 MIME type is supported.
  1. On the Main tab, click
    Local Traffic
    Profiles
    Services
    Rewrite
    .
    The Rewrite profile list appears.
  2. Click
    Create New Profile
    .
    The Create New Profile Rewrite pop-up screen opens.
  3. In the
    Profile Name
     field, type a name, such as
    my_rewrite_profile
    .
  4. From the
    Parent Profile
     list, select
    rewrite
    .
  5. From the
    Rewrite Mode
     list, select
    URI Translation
    .
  6. On the left pane, click
    URI Rules
    .
    An empty text box appears for displaying client-server URI mappings that you specify.
  7. Click
    Add
    .
  8. From the
    Rule Type
     list, select
    Both
    .
  9. In the
    Client URI
     box, type a client path, such as
    /sales/
    .
  10. In the
    Server URI
     box, type a server URI, such as
    http://appserver1.siterequest.com/sales/
    .
    You must include a scheme in the server URI that you specify.
    An example of a scheme is
    http
    .
  11. Click
    OK
    .
    This displays a mapping of the specified client path to the associated server scheme, host, and path.
  12. Click
    Add
     again.
  13. From the
    Rule Type
     list, select
    Both
    .
  14. In the
    Client URI
     field, type a client path, such as
    /marketing/
    .
  15. In the
    Server URI
     field, type a server URI, such as
    http://appserver2.siterequest.com/marketing/
    .
    You must include a scheme in the server URI that you specify.
    An example of a scheme is
    http
    .
  16. Click
    OK
    .
    This displays a mapping of the specified client path to the associated server scheme, host, and path.
  17. Click
    OK
    .
The BIG-IP system now includes two URI rules for performing URI translation on both requests and responses. For example, the host name in a request destined for
http://www.siterequest.com/sales/
 will be translated to
http://appserver1.siterequest.com/sales/
, and the host name in a request destined for
https://www.siterequest.com/marketing/
 will be translated to
http://appserver2.siterequest.com/marketing/
. A reverse translation occurs on any response.

Creating an HTML profile for tag removal

You create an HTML profile when you want the BIG-IP system to act on certain types of HTML content.
  1. On the Main tab, click
    Local Traffic
    Profiles
    Content
    HTML
    .
  2. Click the
    Create New Profile
     button.
  3. In the
    Profile Name
     field, type a name, such as
    my_html_profile
    .
  4. From the
    Parent Profile
     list, select
    /Common/html
    .
  5. On the left pane, click
    HTML Rules
    .
  6. On the
    Create New
     button, click the right arrow.
  7. Select
    Remove Tag
    .
    The Create New Remove Tag Rule box appears.
  8. In the
    Rule Name
     field, type a name, such as
    my_remove_img_tag_rule
    .
  9. Optionally, in the
    Description
     field, type a description of the rule, such as
    Removes the img tag with the src attribute
    .
  10. On the left pane, click
    Match Settings
    .
  11. In the
    Match Tag Name
     field, type the name of the tag that you want to remove from the HTML content.
    An example of a tag to specify is the HTML
    img
     tag.
  12. In the
    Match Attribute Name
     field, type the name of the attribute associated with the tag that you specified for removal.
    An example of an attribute to specify is the
    src
     attribute for the
    img
     tag.
  13. Click
    OK
    .
  14. In the
    Available Rules
     list, locate the HTML rule that you want to enable, and select the adjacent check box.
  15. Using the Move button, move the selected HTML rule to the
    Selected Rules
     list.
  16. Click
    OK
    .
After creating this HTML profile, you can implement the HTML content modification by assigning the profile to the virtual server that is processing the associated HTTP traffic.

Creating pools for processing HTTP traffic

You can create two load balancing pools, and then create a policy that forwards certain HTTP traffic to one pool, and other HTTP traffic to another pool.
  1. On the Main tab, click
    Local Traffic
    Pools
    .
    The Pool List screen opens.
  2. Click
    Create
    .
    The New Pool screen opens.
  3. In the
    Name
     field, type a unique name for the pool.
  4. Using the
    New Members
     setting, add each resource that you want to include in the pool:
    1. (Optional) In the
      Node Name
       field, type a name for the node portion of the pool member.
    2. In the
      Address
       field, type an IP address.
    3. In the
      Service Port
       field, type a port number, or select a service name from the list.
    4. (Optional) In the
      Priority
       field, type a priority number.
    5. Click
      Add
      .
  5. Click
    Finished
    .
  6. Repeat this task to create a second pool.
The new pools appear in the Pools list.

Creating a draft local traffic policy

You can use BIG-IP local traffic policy matching to direct traffic in accordance with rules, which are applied as determined by the specified strategy, conditions, and actions.
Local traffic policies that have been upgraded from BIG-IP software version 12.0, or earlier, appear in the Published Policies list.
  1. On the Main tab, click
    Local Traffic
    Policies
    Policy List
    .
    The Policy List Page screen opens.
  2. Click
    Create
    .
    The New Policy screen opens.
  3. In the
    Policy Name
     field, type a unique name for the policy.
  4. In the
    Description
     field, type a description for the policy.
  5. From the
    Strategy
     list, select a matching strategy.
  6. Click
    Create Policy
    .
    The policy is created and the Rules area appears.
  7. In the Rules area, click
    Create
    .
  8. In the Match all of the following conditions area, click
    +
    .
  9. From the
    Client SSL
     list, select a condition type, and configure the applicable settings and available options.
  10. Click
    Add
    .
  11. In the Match all of the following conditions area, click
    +
     to add an additional condition, as necessary, and configure the applicable settings and available options.
  12. In the Do the following when the traffic is matched area, click
    +
    .
  13. From the
    Enable
     list, select an action type, and configure the applicable settings and available options.
  14. Click
    Add
    .
  15. In the Do the following when the traffic is matched area, click
    +
     to add an additional action, as necessary, and configure the applicable settings and available options.
  16. Click
    Save
    .
The policy appears in the Draft Policies list.

Implementation results

After you perform the tasks in this implementation, the BIG-IP system can:
  • Translate URIs according to the URI rules specified in the Rewrite profile.
  • Modify specified HTML content according to the HTML rule specified in the HTML profile.
  • Forward HTTP traffic to two different non-default pools according to a local traffic policy.
Contact Support Contact Support

Have a Question?

Support and Sales >

About F5

Education

F5 Sites

Support Tasks




©2023 F5, Inc. All rights reserved.


Trademarks Policies Privacy California Privacy Do Not Sell My Personal Information