Manual Chapter : Using Fast L4 for Performance Optimization

Applies To:

Show Versions Show Versions

BIG-IP LTM

  • 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0

BIG-IP PEM

  • 16.0.1, 16.0.0, 15.1.8, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0
Manual Chapter

Using Fast L4 for Performance Optimization

Overview: Using Fast L4 for performance enhancement

Policy Enforcement Manager (PEM) provides capability to apply subscriber base policy to multiple subscriber traffic. PEM provides a switch decision between standard or full proxy to BIG-IP TCP processing per flow, based on preliminary subscriber policy evaluation. You can effectively handle policy actions such as redirect, ICAP adaptation and HTTP header enrichment as the default PEM configuration creates a full proxy listener. Other PEM actions, that do not require full proxy can be performed through Fast L4 basis with BIG-IP TCP support. Some of these PEM actions are quality of service (QoS), bandwidth control, and gate and reporting.
The Performance Layer4 virtual server type uses the Fast L4 profile. The Performance HTTP virtual server type uses the Fast HTTP profile and is designed to speed up certain types of HTTP connections and reduce the number of connections opened to the back-end HTTP servers. This is accomplished by combining features from the TCP, HTTP, and OneConnect profiles into a single profile that is optimized for network performance. The Performance HTTP virtual server processes connections on a packet-by-packet basis and buffers only enough data to parse packet headers.

Task summary

Creating a Fast L4 profile in PEM

You have to create a listener to handle traffic for policy enforcement. Creating a listener performs preliminary setup on the BIG-IP system for application visibility, intelligent steering, bandwidth management, and reporting.
The BIG-IP system specifies the listener that it wants to use for a flow in situation where it decides the optimal listener. You can add an option to specify the listener name in the configuration of the PEM profile.
  1. On the Main tab, click
    Policy Enforcement
    Profiles
    .
    The Policy Enforcement screen opens.
  2. Click
    Create
    .
    The New PEM Profile screen opens.
  3. In the
    Name
    field, type a unique name of the policy enforcement profile.
  4. In the Optimization area, for the
    Connection Optimization
    setting,
    Enabled
    is the default selection. This indicates that the fast PEM optimization is enabled. To change the setting, select
    Custom
    check box and select
    Disabled
    .
  5. From the
    Fast L4 Virtual Server
    list, select the Fast L4 virtual server previously configured. The Fast L4 virtual server is a server with an HTTP profile, protocol TCP, and protocol profile Fast L4.
  6. In the Policy Provisioning area, select enforcement policies to apply to the traffic.
    1. For
      Global Policy
      , move policies to apply to all subscribers to
      High Precedence
      or
      Low Precedence
      .
      For URL categorization to take effect, you need to associate the enforcement policy with a classification profile.
    2. For
      Unknown Subscriber Policy
      , move policies to use if the subscriber is unknown to
      Selected
      .
    The system applies the global policy to all subscribers in parallel with the subscriber policies, and must be configured with unknown subscriber policy. High-precedence global policies override conflicting subscriber policies, and low-precedence policies are overridden by conflicting subscriber policies.
  7. Click
    Finished
    .
    The Policy Enforcement Manager creates a policy enforcement profile with Fast L4.
You have created a Fast L4 profile.

Disabling a Fast L4 profile in PEM

You have to create a listener to handle traffic for policy enforcement. Creating a listener performs preliminary setup on the BIG-IP system for application visibility, intelligent steering, bandwidth management, and reporting.
The BIG-IP system specifies the listener that it wants to use for a flow in situation where it decides the optimal listener. You can add an option to specify the listener name in the configuration of the PEM profile.
  1. On the Main tab, click
    Policy Enforcement
    Profiles
    .
    The Policy Enforcement screen opens.
  2. From the PEM profile list, select a Fast L4 profile that you have created, or click
    Create
    to create a new Fast L4 profile.
  3. In the
    Name
    field, type a unique name of the policy enforcement profile.
  4. In the Optimization area, for the
    Connection Optimization
    setting,
    Enabled
    is the default selection. This indicates that the fast PEM optimization is enabled. To change the setting, select
    Custom
    check box and select
    Disabled
    .
  5. From the
    Fast L4 Virtual Server
    list, select the Fast L4 virtual server previously configured. The Fast L4 virtual server is a server with an HTTP profile, protocol TCP, and protocol profile Fast L4.
  6. In the Policy Provisioning area, select enforcement policies to apply to the traffic.
    1. For
      Global Policy
      , move policies to apply to all subscribers to
      High Precedence
      or
      Low Precedence
      .
      For URL categorization to take effect, you need to associate the enforcement policy with a classification profile.
    2. For
      Unknown Subscriber Policy
      , move policies to use if the subscriber is unknown to
      Selected
      .
    The system applies the global policy to all subscribers in parallel with the subscriber policies, and must be configured with unknown subscriber policy. High-precedence global policies override conflicting subscriber policies, and low-precedence policies are overridden by conflicting subscriber policies.
  7. Click
    Finished
    .
    The Policy Enforcement Manager creates a policy enforcement profile with Fast L4.
You have disabled Fast L4 on a PEM profile.