Manual Chapter : Common elements file for Link Layer Discovery Protocol

Applies To:

Show Versions Show Versions

BIG-IP DNS

  • 15.0.0

BIG-IP Analytics

  • 15.0.0

BIG-IP AFM

  • 15.0.0

BIG-IP PEM

  • 15.0.0

BIG-IP ASM

  • 15.0.0

BIG-IP APM

  • 15.0.0

BIG-IP LTM

  • 15.0.0
Manual Chapter

Common elements file for Link Layer Discovery Protocol

  1. On the Main tab, click
    Network
    Interfaces
    Interface List
    .
    The Interface List screen displays the list of interfaces on the system.
  2. On the Main tab, click
    Network
    Interfaces
    LLDP
    General
    .
    This displays the general LLDP properties that you can configure on the system.
  3. In the Name column, click an interface number.
    This displays the properties of the interface.
  4. For the
    State
    setting, verify that the interface is set to
    Enabled
    .
  5. For the
    LLDP
    setting, verify that the property is set to
    Transmit Only
    .
  6. From the
    LLDP
    list, select a value.
  7. For the
    LLDP Attributes
    setting, verify that the list of attributes in the
    Send
    field includes all Time Length Values (TLVs) that you want the BIG-IP system interface to send to neighbor devices. For more information on LLDP attributes, see the topic
    LLDP attributes
    .
  8. Click the
    Update
    button.
  9. From the
    LLDP
    list, select
    Enabled
    .
  10. For the remainder of the settings, retain or change the default values.
  11. From the
    Polling Interval
    list, select
    Specify
    , and type the maximum interval in seconds between polling by the sFlow agent of this interface.