Manual Chapter : Create an IP address list for a virtual server

Applies To:

Show Versions Show Versions


  • 16.0.0, 15.1.0, 15.0.1, 15.0.0, 14.1.2, 14.1.0
Manual Chapter

Create an IP address list for a virtual server

Before you create an IP address list, see the list of constraints included in this document.
You can specify a list of IP addresses as the destination or source IP address in a virtual server. An
address list
can contain single, non-contiguous IP addresses, a range of contiguous IP addresses, or both.
To specify an address list in a virtual server, you must first create the list using the
Shared Objects
area of the BIG-IP Configuration utility. A virtual server can then listen for all traffic from, or destined for, any of the addresses in the list and apply the same set of profiles and policies to that traffic.
  1. On the Main tab, click
    Shared Objects
    Address List
  2. Click
  3. Type a
    for the address list.
  4. In the
    field, type an IP address and click
    The address appears in the box above the
  5. Repeat the previous step for each address or address range that you want to add to the list.
  6. Click
After you complete this task, you have a list of IP addresses on the BIG-IP system that a virtual server can use when listening for traffic.