Manual Chapter : Create a service port list for a virtual server

Applies To:

Show Versions Show Versions

BIG-IP LTM

  • 15.1.0, 15.0.1, 15.0.0, 14.1.2, 14.1.0
Manual Chapter

Create a service port list for a virtual server

Before you create a service port list, see the list of constraints included in this document.
If you want to specify multiple service ports as the source or destination port on a virtual server, you must first create a port list, using the
Shared Objects
area of the BIG-IP Configuration utility. A
port list
contains a list of ports that a virtual server can listen for and then apply a set of profiles and policies to.
  1. On the Main tab, click
    Shared Objects
    Port List
    .
  2. Click
    Create
    .
  3. Type a
    Name
    for the port list.
  4. In the
    Ports
    field, type a service port and click
    Add
    .
    The port appears in the box above the
    Service Port
    field.
  5. Repeat the previous step for each service port that you want to add to the list.
  6. Click
    Update.
After you complete this task, you have a list of service ports on the BIG-IP system that a virtual server can use when listening for traffic.