Manual Chapter :
Configuring Virtual Servers for Portal Access
Applies To:
Show Versions![Show Versions](/etc/designs/pcx/techdocs/images/expandversions.gif)
BIG-IP APM
- 17.0.0, 16.1.5, 16.1.4, 16.1.3, 16.1.2, 16.1.1, 16.1.0
Configuring Virtual Servers for Portal Access
Defining a virtual server for portal access
You associate an access policy and a rewrite profile with the virtual server, to allow
portal access in an access policy.
For portal access, a virtual server for
an access policy, specify an IP address for a single host as the destination address.
- On the Main tab, click.The Virtual Server List screen opens.
- Click the name of the virtual server you want to modify.
- For theDestination Address/Masksetting, confirm that theHostbutton is selected, and type the IP address in CIDR format.The supported format is address/prefix, where the prefix length is in bits. For example, an IPv4 address/prefix is10.0.0.1or10.0.0.0/24, and an IPv6 address/prefix isffe1::0020/64or2001:ed8:77b5:2:10:10:100:42/64. When you use an IPv4 address without specifying a prefix, the BIG-IP system automatically uses a/32prefix.The IP address you type must be available and not in the loopback network.
- From theHTTP Profile (Client)list, select a previously-created HTTP/2 profile for client-side traffic.
- In the Access Policy area, from theAccess Profilelist, select the access profile that you configured earlier.
- To use GZIP compression with a portal access resource, from theHTTP Compression Profilelist, selecthttpcompression.
- If you are using a connectivity profile, from theConnectivity Profilelist, select the connectivity profile.
- If you are creating a virtual server to use with portal access resources in addition to remote desktops, from theRewrite Profilelist, select the defaultrewriteprofile, or another rewrite profile you created.
- If you use client SSL for this profile, from theSSL Profile (Client)list, select a client SSL profile.
- If you are using HTTPS with any portal access pages, from theSSL Profile (Server)list, selectserverssl-apm.
- If you want to provide connections to allow Java rewriting for portal access or support a per-app VPN connection that is configured on a mobile device, select theApplication Tunnels (Java & Per-App VPN)check box.You must enable this setting to make socket connections from a patched Java applet. If your applet does not require socket connections, or only uses HTTP to request resources, this setting is not required.
- If you want to provide native integration with an OAM server for authentication and authorization, select theOAM Supportcheck box.You must have an OAM server configured in order to enable OAM support.
- ClickUpdate.
Your access policy is now associated with the virtual server.