F5 Logo MyF5
Search
  1. MyF5 Home
  2. BIG-IP Local Traffic Manager: Implementations
  3. Configuring HTTP Load Balancing with Source Address Affinity Persistence
Manual Chapter : Configuring HTTP Load Balancing with Source Address Affinity Persistence

Applies To:

Show Versions Show Versions

BIG-IP APM

  • 17.1.1, 17.1.0, 17.0.0

BIG-IP Link Controller

  • 17.1.1, 17.1.0, 17.0.0

BIG-IP Analytics

  • 17.1.1, 17.1.0, 17.0.0

BIG-IP LTM

  • 17.1.1, 17.1.0, 17.0.0

BIG-IP AFM

  • 17.1.1, 17.1.0, 17.0.0

BIG-IP PEM

  • 17.1.1, 17.1.0, 17.0.0

BIG-IP DNS

  • 17.1.1, 17.1.0, 17.0.0

BIG-IP ASM

  • 17.1.1, 17.1.0, 17.0.0
Manual Chapter

Configuring HTTP Load Balancing with Source Address Affinity Persistence

Overview: HTTP load balancing with source affinity persistence

Many computing environments want to use a BIG-IP system to intelligently manage their HTTP traffic. You can easily control your HTTP traffic by implementing a BIG-IP system feature known as an HTTP profile. An HTTP profile is a group of settings that affect the behavior of HTTP traffic. An HTTP profile defines the way that you want the BIG-IP system to manage HTTP traffic.
You can use the default HTTP profile, with all of its default values, or you can create a custom HTTP profile. This particular implementation uses the default HTTP profile.
When you configure the BIG-IP system to manage HTTP traffic, you can also implement simple session persistence, also known as
source address affinity persistence
. Source address affinity persistence directs session requests to the same server based solely on the source IP address of a packet. To implement source address affinity persistence, the BIG-IP system offers a default persistence profile that you can implement. Just as for HTTP, you can use the default profile, or you can create a custom simple persistence profile.

Setting up basic HTTP load balancing and source address affinity persistence

This implementation describes how to set up a basic HTTP load balancing scenario and source address affinity persistence, using the default HTTP and source address affinity persistence profiles.
Because this implementation configures HTTP load balancing and session persistence using the default HTTP and persistence profiles, you do not need to specifically configure these profiles. Instead, you simply configure some settings on the virtual server when you create it.

Create a pool to process HTTP traffic

You can create a pool of web servers to process HTTP requests.
  1. On the Main tab, click
    Local Traffic
    Pools
    .
    The Pool List screen opens.
  2. Click
    Create
    .
    The New Pool screen opens.
  3. In the
    Name
     field, type a unique name for the pool.
  4. For the
    Health Monitors
     setting, from the
    Available
     list, select the
    http
     monitor and move the monitor to the
    Active
     list.
  5. From the
    Load Balancing Method
     list, select how the system distributes traffic to members of this pool.
    The default is
    Round Robin
    .
  6. For the
    Priority Group Activation
     setting, specify how to handle priority groups:
    • Select
      Disabled
       to disable priority groups. This is the default option.
    • Select
      Less than
      , and in the
      Available Members
       field type the minimum number of members that must remain available in each priority group in order for traffic to remain confined to that group.
  7. Using the
    New Members
     setting, add each resource that you want to include in the pool:
    1. Type an IP address in the
      Address
       field.
    2. Type
      80
       in the
      Service Port
       field, or select
      HTTP
       from the list.
    3. (Optional) Type a priority number in the
      Priority
       field.
    4. Click
      Add
      .
  8. Click
    Finished
    .

Create a virtual server for HTTP traffic

This task creates a destination IP address for application traffic. As part of this task, you must assign the relevant pool to the virtual server.
You can also use HTTP Cookie Insert persistence with a Performance (HTTP) type of virtual server.
  1. On the Main tab, click
    Local Traffic
    Virtual Servers
    .
    The Virtual Server List screen opens.
  2. Click
    Create
    .
    The New Virtual Server screen opens.
  3. In the
    Name
     field, type a unique name for the virtual server.
  4. For the
    Destination Address/Mask
     setting, confirm that the
    Host
     button is selected, and type the IP address in CIDR format.
    The supported format is address/prefix, where the prefix length is in bits. For example, an IPv4 address/prefix is
    10.0.0.1
     or
    10.0.0.0/24
    , and an IPv6 address/prefix is
    ffe1::0020/64
     or
    2001:ed8:77b5:2:10:10:100:42/64
    . When you use an IPv4 address without specifying a prefix, the BIG-IP system automatically uses a
    /32
     prefix.
    The IP address you type must be available and not in the loopback network.
  5. In the
    Service Port
     field, type
    80
    , or select
    HTTP
     from the list.
  6. From the
    HTTP Profile
     list, select
    http
    .
  7. In the Resources area of the screen, from the
    Default Pool
     list, select the relevant pool name.
  8. From the
    Default Persistence Profile
     list, select the name of the custom cookie profile you created earlier, such as
    mycookie_profile
    .
    This implements cookie persistence, using a custom cookie persistence profile.
  9. Click
    Finished
    .
You now have a virtual server to use as a destination address for application traffic.
Contact Support Contact Support

Have a Question?

Support and Sales >

About F5

Education

F5 Sites

Support Tasks




©2023 F5, Inc. All rights reserved.


Trademarks Policies Privacy California Privacy Do Not Sell My Personal Information