Manual Chapter : Objects to configure for L3 outbound transparent topologies

Applies To:

Show Versions Show Versions

BIG-IQ Centralized Management

  • 7.0.0
Manual Chapter

Objects to configure for L3 outbound transparent topologies

Depending on which type of protocol you select for your L3 outbound transparent topology, the system will guide you through different pages to configure corresponding required objects, as shown in the table. Be prepared, and have this information on-hand before beginning a topology configuration.
Protocol
Objects to configure in an L3 outbound transparent topology workflow
TCP
SSL Configuration→ Service → Service Chain → Security Policy → Interception Rule → Egress Setting Log → Log Settings (SSLO RPM 6.0 and later)
UDP
Service → Service Chain → Security Policy → Interception Rule → Egress Setting → Log Settings (SSLO RPM 6.0 and later)
Other
Interception Rule → Egress Setting → Settings (SSLO RPM 6.0 and later)
Any
SSL Configuration → Service → Service Chain → Security Policy → Interception Rule → Egress Setting → Log Settings (SSLO RPM 6.0 and later)