Applies To:Show Versions
BIG-IQ Centralized Management
Install BIG-IQ Data Collection Devices
Prepare to install a data collection device cluster
- Prepare your network environment and architecture (refer toBefore you deploy a BIG-IQ solutioninPlanning a BIG-IQ Centralized Management & Visibility Deploymentonsupport.f5.comfor details).
- Install and configure the platform you plan to install your software on. The platform can either be a physical device or a virtual device. To use a physical device, you need a BIG-IQ 7000 series device. To use a virtual device, the solution you choose depends on the environment you use. Supported platforms for this release are listed below. Use the guide appropriate for your platform to complete the installation. These guides are posted onsupport.f5.com.If you choose this platform:Refer to this guide for installation details:BIG-IQ 7000 SeriesPlatform Guide: BIG-IQ 7000 SeriesAmazon Web ServicesF5 BIG-IQ Centralized Management and Amazon Web Services: SetupCitrix XenServer:F5 BIG-IQ Centralized Management and Citrix XenServer: SetupKVMF5 BIG-IQ Centralized Management and Linux KVM: SetupMicrosoft AzureF5 BIG-IQ Centralized Management and Microsoft Azure: SetupMicrosoft Hyper-VF5 BIG-IQ Centralized Management and Microsoft Hyper-V: SetupVMware NSX-VF5 BIG-IQ Centralized Management and VMware ESXi: SetupXen ProjectF5 BIG-IQ Centralized Management and Linux Xen Project: Setup
- Deploy and configure the number of DCDs you need to manage the data generated by your BIG-IQ solution. For requirements. For help determining the optimal number of DCD devices for your solution, refer to theBIG-IQ Centralized Management DCD Sizing Guideonsupport.askf5.com.
Install a Data Collection Device
- Change the administrator’s default admin and root passwords.
- Specify a passphrase to generate a Master Key.
- Specify a host name and management port address for the system.
- Specify your DNS server and the name of the DNS search domain.
- Specify your Network Time Protocol (NTP) servers and select a time zone.
- Use a browser to log in to BIG-IQ by typinghttps://, where<management_IP_address><management_IP_address>is the address you specified for device management.
- SelectSkip Licenseand click theNextbutton.
- Type aPassphrasethat satisfies the requirements specified on screen, and then type the same phrase forConfirm Passphrase.The DCD uses the passphrase to generate a master key. This passphrase must be the same on all of the devices in the DCD cluster or they won't be able to communicate with each other. Make sure you keep track of the passphrase, because it cannot be recovered if you lose it.
If you are setting up a Microsoft Azure VE, and you type an entry in any of the fields, you will not be able to continue successfully. The only way to proceed is to leave all of the fields empty and click theNextbutton at the bottom of the screen. This allows the system to use the first-time access credentials you specified previously.
- Make sure you keep track of the passphrase, because it cannot be recovered if you lose it. To protect the security of this device, you must have the passphrase used to generate the master key before you can change the master key.
- To add a BIG-IQ to an HA or DCD configuration, its master key must match the key for the other devices in the BIG-IQ HA or DCD configuration. So if the passphrase is different and you do not know what it is, the only way to add that BIG-IQ to a cluster is to reset it to its factory defaults; However, that reset destroys any data on that BIG-IQ.
- Finally, when you backup and restore a BIG-IQ, the master key is backed up with the rest of the data, and you cannot restore that data onto a BIG-IQ that has a different master key, so without that key you will be unable to have this BIG-IQ and it's data in an HA or DCD configuration.
- Specify an (optional) admin and root password and click theNextbutton.
- For System Personality, selectBIG-IQ Data Collection Deviceand click theNextbutton.You cannot undo this choice. Once you license a device as a BIG-IQ Data Collection, you can't change your mind and license it as a BIG-IQ Data Collection Device.
- In theHostnamebox, type a fully-qualified domain name (FQDN) for the system.The FQDN can consist of letters and numbers, as well as the characters underscore ( _ ), dash ( - ), or period ( . ).
- Type theManagement Port Route.The management port IP address must be in Classless Inter-Domain Routing (CIDR) format. For example:10.10.10.10/24.
- Specify what you want the DCD to use for theDiscovery Address.The DCD uses this address to communicate with the BIG-IQ. Best practice is to use the same option (management or self-ip) for all of the BIG-IQ systems and DCDs you set up.When choosing whether to use the management port or a self IP address, consider the long-term ramifications. Changing the discovery address is a lengthy process that includes resetting and rebuilding the entire cluster to change the discovery address for this DCD.
- To use the management IP address, selectUse Management Address.
- To use the internal self IP address, selectSelf IP Address, and type the IP address.The self IP address must be in Classless Inter-Domain Routing (CIDR) format. For example:10.10.10.10/24.
- If you want to create a self IP address, click theCreatebutton in theSelf IPssection.
- If you want to associate a VLAN with the new self IP address, clickCreatebutton in theVLANssection.
- Click theNextbutton at the bottom of the screen.
- In theDNS Lookup Serversfield, type the IP address of your DNS server.You can click theTest Connectionbutton to verify that BIG-IQ can reach that IP address.
- In theDNS Search Domainsfield, type the name of your search domain.The DNS search domain list allows the BIG-IQ system to search for local domain lookups to resolve local host names.
- In theTime Serversfield, type the IP addresses of your Network Time Protocol (NTP) server.You can click theTest Connectionbutton to verify that BIG-IQ can reach the IP address.
- From theTime Zonelist, select your local time zone, then clickNext.
- Click theNextbutton at the bottom of the screen.
- After you review the details, clickLaunchand then clickRestartto confirm.