Manual Chapter :
Layer 2 outbound SSLO topology overview
Applies To:
Show Versions
BIG-IQ Centralized Management
- 8.4.0
Layer 2 outbound SSLO topology overview
To configure an L2 outbound topology, you must set up an L2 wired device on the managed BIG-IP device. Within an L2 topology deployment, traffic is routed through the BIG-IP device, and exposes no external IP addresses, because it is effectively transparent on the wire.
- Traffic flows into the BIG-IP device.
- The BIG-IP device decrypts the traffic and sends it to Security Devices.
- The BIG-IP device re-encrypts the traffic and sends it out to the applications.
