Manual Chapter :
Configure the system allow list from the webUI
Applies To:
Show Versions
F5OS-A
- 1.7.0
Configure the system allow list from the webUI
You can configure the system allow list from
either the system controller or chassis partition webUI. To edit an existing allow list
entry, select the IP address that you want to edit. You cannot change the designated
name, but you can change all other fields.
- Log in to the VELOS system controller webUI or the chassis partition webUI using an account with admin access.
- On the left, click .
- In the Allowed IP Addresses area, clickAddto add an IP address to the allow list.
- ForName, enter a descriptive name for the IP address.
- ForIPv4/IPv6, selectIPv4orIPv6.
- ForAddress, enter the IP address to be added to the allow list.
- ForPrefix Length, enter or select the prefix length.The prefix length values must be between 1 and 32 for IPv4 and between 1 and 128 for IPv6.
- ForPort, select a port number for the IP address.Available options are:
- 443 (HTTPS): Allow only HTTP with SSL traffic on this IP address.
- 80 (HTTP): Allow only HTTP traffic on this IP address.
- 8888 (RESTCONF): Allow only RESTCONF traffic on this IP address.
- 161 (SNMP): Allow only SNMP traffic on this IP address.
- 7001 (VCONSOLE): Allow only VCONSOLE traffic on this IP address.
- 22 (SSH): Allow only SSH traffic on this IP address.
- ClickSave & Close.
