Manual Chapter :
Platform Specifications
Applies To:
Show Versions
Platform Specifications
General specifications for system features
This table lists general specifications for
system features for BIG-IP® iSeries
platforms.
Item |
Specification |
|---|---|
Transceiver modules hot
swap |
Support for hot swap of optical
transceiver modules |
Fan tray hot swap |
Support for hot swap of the fan
tray
|
Power supply hot swap |
Support for hot swap of the
power supplies in dual supply systems |
Jumbo frames |
Support for maximum Ethernet
frame size of 9216 bytes and MTU of 9128 bytes |
F5 Virtual Clustered
Multiprocessing (vCMP) |
Supports provisioning and
managing multiple, hosted instances of F5 software on
a single hardware device Supported only in platforms
running a high performance license (x800). |
F5®
TurboFlex™
Profiles |
TurboFlex Profiles are groupings
of hardware-accelerated (FPGA) features that are
associated with a specific use case. TurboFlex Profiles
are groupings of hardware-accelerated features that are
dependent on module licensing. If BIG-IP LTM is licensed and provisioned,
then the ADC profile is available. If BIG-IP AFM is
licensed and provisioned, then the Security profile is
available. TurboFlex Profiles are supported only in
platforms running a high performance license (x800). Also,
TurboFlex Profile availability varies depending on the
platform series tier. For more information, see F5 Platforms: TurboFlex
Profiles at techdocs.f5.com/en-us/hw-platforms/f5-platforms--turboflex-profiles.html. |
Hardware specifications - i15000
(i15600/i15800) Series
This table lists hardware specifications for i15000 (i15600/i15800) Series
platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 3.45 inches (8.76 cm) x W: 17.9 inches (45.47 cm)
x D: 30.2 inches (76.71 cm) (per unit) 2U industry
standard rack-mount chassis
|
Weight |
76.00 pounds (34.47 kg) with two power supplies (per unit)
|
Processor |
2 x 14-Core Intel®
Xeon® processor (total 56
hyperthreaded logical processing cores)
|
Communication interfaces |
4 x 100GbE QSFP28 fiber ports
8 x 40GbE QSFP+ fiber ports 1 x 10GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 3.0 interface |
Storage drive capacity |
1 x 1.92 TB solid-state drive (SSD) |
RAM |
512 GB
|
AC power supply |
2 x 1500 W 100-240 VAC(+/- 10%) AUTO Switching Platinum
2 x NEMA 5-15P power cords |
DC power supply |
2 x 1500W DC Operating range: 44-72 VDC Minimum start up voltage: 40 VDC Power supply will not start below 40
VDC. |
Specifications are subject to change without
notification.
Hardware
specifications - i15000N (i15800-N)
This table lists hardware specifications for
i15000N (i15800-N) platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 3.45 inches (8.76 cm) x W: 17.9 inches (45.47 cm)
x D: 30.2 inches (76.71 cm) (per unit) 2U industry
standard rack-mount chassis
|
Weight |
76.00 pounds (34.47 kg) with two power supplies (per unit)
|
Processor |
2 x 14-Core Intel®
Xeon® processor (total 56
hyperthreaded logical processing cores)
|
Communication interfaces |
4 x 100GbE QSFP28 fiber ports
8 x 40GbE QSFP+ fiber ports 1 x 10GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 3.0 interface |
Storage drive capacity |
1 x 1.92 TB solid-state drive (SSD) |
AC power supply |
2 x 1500 W 100-240 VAC(+/- 10%) AUTO Switching Platinum
2 x NEMA 5-15P power cords |
DC power supply |
2 x 1500W DC Operating range: 44-72 VDC Minimum start up voltage: 40 VDC Power supply will not start below 40
VDC. |
Specifications are subject to change without
notification.
Hardware
specifications - i15000F (i15820-DF)
This table lists hardware specifications for
i15000-F (i15820-DF) platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 3.45 inches (8.76 cm) x W: 17.9 inches (45.47 cm)
x D: 30.2 inches (76.71 cm) (per unit) 2U industry
standard rack-mount chassis
|
Weight |
76.00 pounds (34.47 kg) with two power supplies (per unit)
|
Processor |
2 x 14-Core Intel®
Xeon® processor (total 56
hyperthreaded logical processing cores)
|
FIPS hardware security module
(HSM) |
Cavium Nitrox III |
Communication interfaces |
4 x 100GbE QSFP28 fiber ports
8 x 40GbE QSFP+ fiber ports 1 x 10GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 3.0 interface |
Storage drive capacity |
2 x 1.92 TB solid-state drive (SSD) |
AC power supply |
2 x 1500 W 100-240 VAC(+/- 10%) AUTO Switching Platinum
2 x NEMA 5-15P power cords |
DC power supply |
2 x 1500W DC Operating range: 44-72 VDC Minimum start up voltage: 40 VDC Power supply will not start below 40
VDC. |
Specifications are subject to change without
notification.
Power
specifications - i15000/i15000N (i15600/i15800/i15800-N) Series
This table lists power specifications for
i15000/i15000N (i15600/i15800/i15800-N) Series platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC
power) |
110VAC input: 640W
220VAC input: 630W |
110VAC input: 655W
220VAC input: 645W |
Idle power draw (DC
power) |
48VDC input: 635W |
48VDC input: 650W |
Typical power draw (AC power;
50% load; temp 25°C) |
110VAC input: 870W
220VAC input: 850W |
110VAC input: 885W
220VAC input: 875W |
Typical power draw (DC power;
50% load; temp 25°C) |
48VDC input: 880W |
48VDC input: 875W |
Maximum power draw (AC
power) |
110VAC input: 1100W
220VAC input: 1065W |
110VAC input: 1110W
220VAC input: 1100W |
Maximum power draw (DC
power) |
48VDC input: 1120W |
48VDC input: 1100W |
Typical heat generated (AC
power) |
110VAC input: 2970 BTU/hour
220VAC input: 2905 BTU/hour |
110VAC input: 3020 BTU/hour
220VAC input: 2990 BTU/hour |
Typical heat generated (DC
power) |
48VDC input: 3005
BTU/hour |
48VDC input: 2990
BTU/hour |
Maximum heat generated (AC
power) |
3755 BTU/hour |
3790 BTU/hour |
Maximum heat generated (DC
power) |
3825 BTU/hour |
3755 BTU/hour |
Specifications are subject to change without
notification.
Power
specifications - i15000-DF (i15820-DF)
This table lists power specifications for
i15000-DF (i15820-DF) platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC
power) |
110VAC input: 565W 220VAC
input: 555W |
110VAC input: 585W 220VAC
input: 575W |
Idle power draw (DC
power) |
48VDC input: 565W |
48VDC input: 575W |
Typical power draw (AC power;
50% load; temp 25°C) |
110VAC input: 800W 220VAC
input: 785W |
110VAC input: 815W 220VAC
input: 800W |
Typical power draw (DC power;
50% load; temp 25°C) |
48VDC input: 810W |
48VDC input: 815W |
Maximum power draw (AC
power) |
110VAC input: 1030W 220VAC
input: 1010W |
110VAC input: 1040W 220VAC
input: 1025W |
Maximum power draw (DC
power) |
48VDC input: 1050W |
48VDC input: 1055W |
Typical heat generated (AC
power) |
110VAC input: 2730 BTU/hour 220VAC input: 2680 BTU/hour |
110VAC input: 2785 BTU/hour 220VAC input: 2730 BTU/hour |
Typical heat generated (DC
power) |
48VDC input: 2765 BTU/hour |
48VDC input: 2785 BTU/hour |
Maximum heat generated (AC
power) |
3515 BTU/hour |
3550 BTU/hour |
Maximum heat generated (DC
power) |
3585 BTU/hour |
3600 BTU/hour |
Specifications are subject to change without
notification.
Environmental operating
specifications
This table lists platform environmental operating
specifications.
NEBS
platforms meet NEBS environmental requirements per GR-63-CORE, with exceptions
noted under "Guidelines for NEBS platforms."
Item |
Specification |
|---|---|
Operational temperature |
32 to 104°F (0 to 40°C) |
Operational relative humidity |
5% to 85% (40°C) non-condensing Up to 93% (40°C) non-condensing for a maximum of 96 hours |
Non-operational temperature |
-40 to 158°F (-40 to 70°C) |
Non-operational relative humidity |
5% to 93% (40°C) non-condensing |
Safety requirements
This equipment complies with these requirements of the Low Voltage Directive
2014/35/EU:
EC Type Examination
Certificates: Master Contract 252302 |
|
CB Scheme |
|
EN
60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 |
|
IEC 60950-1:2005,
A1:2009+A2:2013 |
|
CSA 60950-1-07, Including
A1:2011+A2:2014 |
|
ANSI/UL 60950-1-2014 |
EMC requirements
USA--FCC Class A, Canada--Industry Canada Class A
This equipment complies with Part 15 of FCC Rules. Operation is subject to these two
conditions:
- This equipment may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
European Union
This equipment complies with these requirements of the EMC Directive 2014/30/EU:
As Telecommunication Network Equipment (TNE) in Both Telecom Centers and
Other than Telecom Centers per (as applicable):
ETSI EN 300 386 V1.6.1 (2012) |
EN 55032:2012/AC:2013 |
EN 61000-3-2:2014 |
EN 61000-3-3:2013 |
As Information Technology Equipment (ITE) Class A per (as applicable):
EN 55024:2010 |
EN 55032:2012/AC:2013 |
EN 61000-3-2:2014 |
EN 61000-3-3:2013 |
Acoustic and altitude
specifications
This table lists acoustic levels and operational altitude specifications
for iSeries platforms.
Specification type |
Detail |
Value |
Notes |
|---|---|---|---|
Acoustic |
Sound power |
77
dBA |
A-weighted Sound Power at 27°C full system
load. |
Altitude |
Operational |
6,000 Feet |
Per Telcordia GR-63-CORE, section 4.1.3: This unit is
functional when installed at elevations between 60m (197
feet) below sea level and 1800m (6000 feet) above sea
level at the aisle ambient temperatures of 40°C. NEBS-certified platforms conform to NEBS
specifications above 6000 feet. |
Non-operational |
40,000 Feet |
Airflow specifications
This table lists airflow movement specifications for BIG-IP®
iSeries platforms.
Fan tray airflow measurements
are taken at 100% duty cycle and in open air.
Platform |
Value (max) |
|---|---|
i15000 |
300.8 CFM |
