Manual Chapter : Platform Specifications

Applies To:

Show Versions Show Versions

BIG-IP DNS

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP PEM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP AFM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP Analytics

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP ASM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP APM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP LTM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3
Manual Chapter

Platform Specifications

General specifications for system features

This table lists general specifications for system features for BIG-IP® iSeries platforms.
Item
Specification
Transceiver modules hot swap
Support for hot swap of optical transceiver modules
Fan tray hot swap
Support for hot swap of the fan tray
Applies only to i7000/i10000/i11000 Series platforms.
Power supply hot swap
Support for hot swap of the power supplies in dual supply systems
Jumbo frames
Support for maximum Ethernet frame size of 9216 bytes and MTU of 9128 bytes
F5®Virtual Clustered Multiprocessing (vCMP®)
Supports provisioning and managing multiple, hosted instances of
F5®
software on a single hardware device
Supported only in platforms running a high performance license (x800).
F5®TurboFlex Profiles
TurboFlex Profiles are groupings of hardware-accelerated (FPGA) features that are associated with a specific use case. TurboFlex Profiles are groupings of hardware-accelerated features that are dependent on module licensing. If
BIG-IP®
LTM® is licensed and provisioned, then the ADC profile is available. If
BIG-IP
AFM is licensed and provisioned, then the Security profile is available. TurboFlex Profiles are supported only in platforms running a high performance license (x800). Also, TurboFlex Profile availability varies depending on the platform series tier. For more information, see
F5 Platforms: TurboFlex Profiles
at
support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/f5-platform-turboflex-profiles
.

Hardware specifications - i5000 (i5600/i5800) Series

This table lists hardware specifications for i5000 (i5600/i5800) Series platforms.
Item
Specification
Dimensions
H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight
24.5 pounds (11.11 kg) with one power supply (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid-mount rack brackets add 2.5 pounds (1.13 kg).
  • Additional power supply adds 2.0 pounds (0.91 kg).
Processor
1 x Quad-Core Intel®Xeon® processor (total 8 hyperthreaded logical processing cores)
Communication interfaces
8 x 10GbE SFP+


4 x 40GbE QSFP+ fiber ports


1 x 1GbE management port


1 x RJ45 console port


1 x RJ45 failover port


1 x USB 2.0 interface

Storage drive capacity
1 to 2 x 480 GB solid-state drives (SSDs)
RAM
48 GB
AC power supply
1 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum


1 x NEMA 5-15P power cords

DC power supply
2 x 650W DC


Operating range: 44-72 VDC


Minimum start up voltage: 44 VDC

Power supply will not start below 44 VDC.
Specifications are subject to change without notification.

Hardware specifications - i5000F (i5820-DF)

This table lists hardware specifications for i5000 (i5600/i5800) Series platforms.
Item
Specification
Dimensions
H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight
24.5 pounds (11.11 kg) with one power supply (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid-mount rack brackets add 2.5 pounds (1.13 kg).
  • Additional power supply adds 2.0 pounds (0.91 kg).
Processor
1 x Quad-Core Intel®Xeon® processor (total 8 hyperthreaded logical processing cores)
FIPS hardware security module (HSM)
Cavium Nitrox III
Communication interfaces
8 x 10GbE SFP+


4 x 40GbE QSFP+ fiber ports


1 x 1GbE management port


1 x RJ45 console port


1 x RJ45 failover port


1 x USB 2.0 interface

Storage drive capacity
2 x 480 GB solid-state drives (SSDs)
RAM
48 GB
AC power supply
1 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum


1 x NEMA 5-15P power cords

Specifications are subject to change without notification.

Hardware specifications - i7000 (i7600/i7800) Series

This table lists hardware specifications for i7000 (i7600/i7800) Series platforms.
Item
Specification
Dimensions
H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight
30.0 pounds (13.61 kg) with two power supplies (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid-mount rack brackets add 2.5 pounds (1.13 kg).
Processor
1 x Six-Core Intel®Xeon® processor (total 12 hyperthreaded logical processing cores)
Communication interfaces
8 x 10GbE SFP+


4 x 40GbE QSFP+ fiber ports


1 x 1GbE management port


1 x RJ45 console port


1 x RJ45 failover port


1 x USB 2.0 interface

Storage drive capacity
1 to 2 x 480 GB solid-state drives (SSDs)
RAM
96 GB
AC power supply
2 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum


2 x NEMA 5-15P power cords

DC power supply
2 x 650W DC


Operating range: 44-72 VDC


Minimum start up voltage: 44 VDC

Power supply will not start below 44 VDC.
High Voltage DC (HVDC) power supply
2 x 650W DC


Operating range: 180-400 VDC


Minimum start up voltage: 170 VDC

Power supply will not start below 170 VDC.
Specifications are subject to change without notification.

Hardware specifications - i7000F (i7820-DF)

This table lists hardware specifications for i7000F (i7820-DF) platforms.
Item
Specification
Dimensions
H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight
30.0 pounds (13.61 kg) with two power supplies (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid-mount rack brackets add 2.5 pounds (1.13 kg).
Processor
1 x Six-Core Intel®Xeon® processor (total 12 hyperthreaded logical processing cores)
FIPS hardware security module (HSM)
Cavium Nitrox III
Communication interfaces
8 x 10GbE SFP+


4 x 40GbE QSFP+ fiber ports


1 x 1GbE management port


1 x RJ45 console port


1 x RJ45 failover port


1 x USB 2.0 interface

Storage drive capacity
2 x 480 GB solid-state drives (SSDs)
RAM
96 GB
AC power supply
2 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum


2 x NEMA 5-15P power cords

DC power supply
2 x 650W DC


Operating range: 44-72 VDC


Minimum start up voltage: 44 VDC

Power supply will not start below 44 VDC.
High Voltage DC (HVDC) power supply
2 x 650W DC


Operating range: 180-400 VDC


Minimum start up voltage: 170 VDC

Power supply will not start below 170 VDC.
Specifications are subject to change without notification.

Hardware specifications - i10000 (i10600/i10080) Series

This table lists hardware specifications for i10000 (i10600/i10080) Series platforms.
Item
Specification
Dimensions
H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight
36.0 pounds (16.33 kg) with two power supplies (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid-mount rack brackets add 2.5 pounds (1.13 kg).
Processor
1 x Eight-Core Intel®Xeon® processor (total 16 hyperthreaded logical processing cores)
Communication interfaces
8 x 10GbE SFP+


6 x 40GbE QSFP+ fiber ports


1 x 1GbE management port


1 x RJ45 console port


1 x RJ45 failover port


1 x USB 2.0 interface

Storage drive capacity
1 to 2 x 480 GB solid-state drives (SSDs)
RAM
128 GB
AC power supply
2 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum


2 x NEMA 5-15P power cords

DC power supply
2 x 650W DC


Operating range: 44-72 VDC


Minimum start up voltage: 44 VDC

Power supply will not start below 44 VDC.
High Voltage DC (HVDC) power supply
2 x 650W DC


Operating range: 180-400 VDC


Minimum start up voltage: 170 VDC

Power supply will not start below 170 VDC.
Specifications are subject to change without notification.

Hardware specifications - i10010 (i10610/i10810)

This table lists hardware specifications for i10010 (i10610/i10810) platforms.
Item
Specification
Dimensions
H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight
36.0 pounds (16.33 kg) with two power supplies (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid-mount rack brackets add 2.5 pounds (1.13 kg).
Processor
1 x Eight-Core Intel®Xeon® processor (total 16 hyperthreaded logical processing cores)
Communication interfaces
4 x 40GbE QSFP+


4 x 100GbE QSFP28 fiber ports


1 x 1GbE management port


1 x RJ45 console port


1 x RJ45 failover port


1 x USB 2.0 interface

Storage drive capacity
1 to 2 x 480 GB solid-state drives (SSDs)
RAM
128 GB
DC power supply
2 x 650W DC


Operating range: 44-72 VDC


Minimum start up voltage: 44 VDC

Power supply will not start below 44 VDC.
High Voltage DC (HVDC) power supply
2 x 650W DC


Operating range: 180-400 VDC


Minimum start up voltage: 170 VDC

Power supply will not start below 170 VDC.
Specifications are subject to change without notification.

Hardware specifications - i11000 (i11600/i11800) Series

This table lists hardware specifications for i11000 (i11600/i11800) Series platforms.
Item
Specification
Dimensions
H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight
36.0 pounds (16.33 kg) with two power supplies (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid-mount rack brackets add 2.5 pounds (1.13 kg).
Processor
1 x 18-Core Intel®Xeon® processor (total 32 hyperthreaded logical processing cores)
Communication interfaces
8 x 10GbE SFP+


6 x 40GbE QSFP+ fiber ports


1 x 1GbE management port


1 x RJ45 console port


1 x RJ45 failover port


1 x USB 2.0 interface

Storage drive capacity
1 x 960 GB solid-state drive (SSD)
RAM
256 GB
AC power supply
2 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum


2 x NEMA 5-15P power cords

DC power supply
2 x 650W DC


Operating range: 44-72 VDC


Minimum start up voltage: 44 VDC

Power supply will not start below 44 VDC.
High Voltage DC (HVDC) power supply
2 x 650W DC


Operating range: 180-400 VDC


Minimum start up voltage: 170 VDC

Power supply will not start below 170 VDC.
Specifications are subject to change without notification.

Hardware specifications - i11000S (i11800-S)

This table lists hardware specifications for i11000S (i11800-S) platforms.
Item
Specification
Dimensions
H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight
36.0 pounds (16.33 kg) with two power supplies (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid-mount rack brackets add 2.5 pounds (1.13 kg).
Processor
1 x 18-Core Intel® Xeon® processor (total 32 hyperthreaded logical processing cores)
Communication interfaces
8 x 10GbE SFP+


6 x 40GbE QSFP+ fiber ports


1 x 1GbE management port


1 x RJ45 console port


1 x RJ45 failover port


1 x USB 2.0 interface

Storage drive capacity
1 x 960 GB solid-state drive (SSD)
RAM
256 GB
AC power supply
2 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum


2 x NEMA 5-15P power cords

Specifications are subject to change without notification.

Power specifications - i5000 (i5600/i5800) Series

This table lists power specifications for i5000 (i5600/i5800) Series platforms.
Item
Single power supply
Dual power supply
Idle power draw (AC power)
110VAC input: 195W


220VAC input: 190W

110VAC input: 205W


220VAC input: 205W

Idle power draw (DC power)
48VDC input: 195W
48VDC input: 205W
Typical power draw (AC power; 50% load; temp 25°C)
110VAC input: 265W


220VAC input: 260W

110VAC input: 265W


220VAC input: 265W

Typical power draw (DC power; 50% load; temp 25°C)
48VDC input: 260W
48VDC input: 265W
Maximum power draw (AC power)
110VAC input: 330W


220VAC input: 325W

110VAC input: 330W


220VAC input: 325W

Maximum power draw (DC power)
48VDC input: 320W
48VDC input: 320W
Typical heat generated (AC power)
110VAC input: 905 BTU/hour


220VAC input: 890 BTU/hour

110VAC input: 905 BTU/hour


220VAC input: 905 BTU/hour

Typical heat generated (DC power)
48VDC input: 890 BTU/hour
48VDC input: 905 BTU/hour
Maximum heat generated (AC power)
220VDC input: 1130 BTU/hour
220VDC input: 1130 BTU/hour
Maximum heat generated (DC power)
48VDC input: 1095 BTU/hour
48VDC input: 1095 BTU/hour
Specifications are subject to change without notification.

Power specifications - i5000F (i5820-DF)

This table lists power specifications for i5000F (i5820-DF) platforms.
Item
Single power supply
Dual power supply
Idle power draw (AC power)
110VAC input: 230W


220VAC input: 225W

110VAC input: 240W


220VAC input: 235W

Typical power draw (AC power; 50% load; temp 25°C)
110VAC input: 325W


220VAC input: 320W

110VAC input: 340W


220VAC input: 330W

Maximum power draw (AC power)
110VAC input: 420W


220VAC input: 410W

110VAC input: 435W


220VAC input: 420W

Typical heat generated (AC power)
110VAC input: 1110 BTU/hour


220VAC input: 1110 BTU/hour

110VAC input: 1165 BTU/hour


220VAC input: 1130 BTU/hour

Maximum heat generated (AC power)
220VAC input: 1435 BTU/hour
220VAC input: 1485 BTU/hour
Specifications are subject to change without notification.

Power specifications - i7000 (i7600/i7800) Series

This table lists power specifications for i7000 (i7600/i7800) Series platforms.
Item
Single power supply
Dual power supply
Idle power draw (AC power)
110VAC input: 210W


220VAC input: 210W

110VAC input: 225W


220VAC input: 220W

Idle power draw (DC
/HVDC
power)
48VDC input: 205W


240VDC input: 250W


380VDC input: 255W

48VDC input: 215W


240VDC input: 260W


380VDC input: 260W

Typical power draw (AC power; 50% load; temp 25°C)
110VAC input: 300W


220VAC input: 295W

110VAC input: 310W


220VAC input: 305W

Typical power draw (DC
/HVDC
power; 50% load; temp 25°C)
48VDC input: 290W


240VDC input: 340W


380VDC input: 240W

48VDC input: 300W


240VDC input: 350W


380VDC input: 250W

Maximum power draw (AC power)
110VAC input: 390W


240VAC input: 380W

110VAC input: 390W


240VAC input: 390W

Maximum power draw (DC
/HVDC
power)
48VDC input: 370W


240VDC input: 445W


380VDC input: 455W

48VDC input: 380W


240VDC input: 455W


380VDC input: 465W

Typical heat generated (AC power)
110VAC input: 1025 BTU/hour


220VAC input: 1010 BTU/hour

110VAC input: 1060 BTU/hour


220VAC input: 1280 BTU/hour

Typical heat generated (DC/
HVDC power)
48VDC input: 990 BTU/hour


240VDC input: 1165 BTU/hour


380VDC input: 1195 BTU/hour

48VDC input: 1025 BTU/hour


240VDC input: 1195 BTU/hour


380VDC input: 1230 BTU/hour

Maximum heat generated (AC power)
220VAC input: 1045 BTU/hour
220VAC input: 1335 BTU/hour
Maximum heat generated (DC
/HVDC
power)
48VDC input: 1265 BTU/hour


240VDC input: 1520 BTU/hour


380VDC input: 1555 BTU/hour

48VDC input: 1300 BTU/hour


240VDC input: 1555 BTU/hour


380VDC input: 1590 BTU/hour

Specifications are subject to change without notification.

Power specifications - i7000F (i7820-DF)

This table lists power specifications for i7000F (i7820-DF) Series platforms.
Item
Single power supply
Dual power supply
Idle power draw (AC power)
110VAC input: 240W


220VAC input: 235W

110VAC input: 245W


220VAC input: 250W

Idle power draw (DC
/HVDC
power)
48VDC input: 235W


240VDC input: 250W


380VDC input: 255W

48VDC input: 245W


240VDC input: 260W


380VDC input: 260W

Typical power draw (AC power; 50% load; temp 25°C)
110VAC input: 355W


220VAC input: 345W

110VAC input: 360W


220VAC input: 355W

Typical power draw (DC
/HVDC
power; 50% load; temp 25°C)
48VDC input: 350W


240VDC input: 350W


380VDC input: 355W

48VDC input: 355W


240VDC input: 360W


380VDC input: 365W

Maximum power draw (AC power)
110VAC input: 465W


240VAC input: 450W

110VAC input: 470W


240VAC input: 460W

Maximum power draw (DC
/HVDC
power)
48VDC input: 460W


240VDC input: 450W


380VDC input: 455W

48VDC input: 465W


240VDC input: 460W


380VDC input: 465W

Typical heat generated (AC power)
110VAC input: 1215 BTU/hour


220VAC input: 1180 BTU/hour

110VAC input: 1230 BTU/hour


220VAC input: 1215 BTU/hour

Typical heat generated (DC
/HVDC
power)
48VDC input: 1195 BTU/hour


240VDC input: 1195 BTU/hour


380VDC input: 1215 BTU/hour

48VDC input: 1215 BTU/hour


240VDC input: 1230 BTU/hour


380VDC input: 1250 BTU/hour

Maximum heat generated (AC power)


220VAC input: 1590 BTU/hour


220VAC input: 1605 BTU/hour

Maximum heat generated (DC
/HVDC
power)
48VDC input: 1570 BTU/hour


240VDC input: 1540 BTU/hour


380VDC input: 1555 BTU/hour

48VDC input: 1590 BTU/hour


240VDC input: 1570 BTU/hour


380VDC input: 1590 BTU/hour

Specifications are subject to change without notification.

Power specifications - i10000 (i10600/i10080) Series

This table lists power specifications for i10000 (i10600/i10080) Series platforms.
Item
Single power supply
Dual power supply
Idle power draw (AC power)
110VAC input: 290W


220VAC input: 285W

110VAC input: 300W


220VAC input: 295W

Idle power draw (DC
/HVDC
power)
48VDC input: 285W


240VDC input: 310W


380VDC input: 315W

48VDC input: 295W


240VDC input: 320W


380VDC input: 325W

Typical power draw (AC power; 50% load; temp 25°C)
110VAC input: 405W


220VAC input: 400W

110VAC input: 415W


220VAC input: 410W

Typical power draw (DC
/HVDC
power; 50% load; temp 25°C)
48VDC input: 400W


240VDC input: 420W


380VDC input:425W

48VDC input: 405W


240VDC input: 430W


380VDC input: 430W

Maximum power draw (AC power)
110VAC input: 520W


240VAC input: 510W

110VAC input: 525W


240VAC input: 520W

Maximum power draw (DC
/HVDC
power)
48VDC input: 510W


240VDC input: 525W


380VDC input: 535W

48VDC input: 510W


240VDC input: 535W


380VDC input: 535W

Typical heat generated (AC power)
110VAC input: 1385 BTU/hour


220VAC input: 1365 BTU/hour

110VAC input: 1420 BTU/hour


220VAC input: 1400 BTU/hour

Typical heat generated (DC
/HVDC
power)
48VDC input: 1365 BTU/hour


240VDC input: 1435 BTU/hour


380VDC input: 1455 BTU/hour

48VDC input: 1745 BTU/hour


240VDC input: 1470 BTU/hour


380VDC input: 1470 BTU/hour

Maximum heat generated (AC power)
220VAC input: 1775 BTU/hour
220VAC input: 1795 BTU/hour
Maximum heat generated (DC
/HVDC
power)
48VDC input: 1385 BTU/hour


240VDC input: 1795 BTU/hour


380VDC input: 1830 BTU/hour

48VDC input: 1745 BTU/hour


240VDC input: 1830 BTU/hour


380VDC input: 1830 BTU/hour

Specifications are subject to change without notification.

Power specifications - i11000 (i11600/i11800) Series

This table lists power specifications for i11000 (i11600/i11800) Series platforms.
Item
Single power supply
Dual power supply
Idle power draw (AC power)
110VAC input: 340W


220VAC input: 330W

110VAC input: 340W


220VAC input: 330W

Typical power draw (AC power; 50% load; temp 25°C)
110VAC input: 460W


220VAC input: 440W

110VAC input: 455W


220VAC input: 440W

Maximum power draw (AC power)
110VAC input: 575W


240VAC input: 550W

110VAC input: 570W


240VAC input: 550W

Typical heat generated (AC power)
110VAC input: 1570 BTU/hour


220VAC input: 1505 BTU/hour

110VAC input: 1555 BTU/hour


220VAC input: 1505 BTU/hour

Maximum heat generated (AC power)
1965 BTU/hour
1945 BTU/hour
Specifications are subject to change without notification.

Power specifications - i11000S (i11400-DS/i11600-DS/i11800-DS)

This table lists power specifications for i11000S (i11400-DS/i11600-DS/i11800-DS) Series platforms.
Item
Single power supply
Dual power supply
Idle power draw (AC power)
110VAC input: 295W


220VAC input: 290W

110VAC input: 305W


220VAC input: 295W

Typical power draw (AC power; 50% load; temp 25°C)
110VAC input: 435W


220VAC input: 425W

110VAC input: 435W


220VAC input: 430W

Maximum power draw (AC power)
110VAC input: 575W


240VAC input: 560W

110VAC input: 565W


240VAC input: 560W

Typical heat generated (AC power)
110VAC input: 1485 BTU/hour


220VAC input: 1455 BTU/hour

110VAC input: 1485 BTU/hour


220VAC input: 1470 BTU/hour

Maximum heat generated (AC power)
1965 BTU/hour
1930 BTU/hour
Specifications are subject to change without notification.

Environmental operating specifications

This table lists platform environmental operating specifications.
Item
Specification
Operational temperature
32 to 104°F (0 to 40°C)
Operational relative humidity
5% to 85% (40°C) non-condensing


Up to 93% (40°C) non-condensing for a maximum of 96 hours

Non-operational temperature
-40 to 158°F (-40 to 70°C)
Non-operational relative humidity
5% to 93% (40°C) non-condensing

Safety requirements

This equipment complies with these requirements of the Low Voltage Directive 2014/35/EU:
EC Type Examination Certificates: Master Contract 252302
CB Scheme
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
IEC 60950-1:2005, A1:2009+A2:2013
CSA 60950-1-07, Including A1:2011+A2:2014
ANSI/UL 60950-1-2014

EMC requirements

USA--FCC Class A, Canada--Industry Canada Class A

This equipment complies with Part 15 of FCC Rules. Operation is subject to these two conditions:
  1. This equipment may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

European Union

This equipment complies with these requirements of the EMC Directive 2014/30/EU:
As Telecommunication Network Equipment (TNE) in Both Telecom Centers and Other than Telecom Centers per (as applicable):
ETSI EN 300 386 V1.6.1 (2012)
EN 55032:2012/AC:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
As Information Technology Equipment (ITE) Class A per (as applicable):
EN 55024:2010
EN 55032:2012/AC:2013
EN 61000-3-2:2014
EN 61000-3-3:2013

Acoustic and altitude specifications

This table lists acoustic levels and operational altitude specifications for iSeries platforms.
Specification type
Detail
Value
Notes
Acoustic
Sound power
72.72
dBA
A-weighted Sound Power at 27°C full system load.
Altitude
Operational
6,000 Feet
Per Telcordia GR-63-CORE, section 4.1.3: This unit is functional when installed at elevations between 60m (197 feet) below sea level and 1800m (6000 feet) above sea level at the aisle ambient temperatures of 40°C.
NEBS-certified platforms conform to NEBS specifications above 6000 feet.
Non-operational
40,000 Feet

Airflow specifications

This table lists airflow movement specifications for BIG-IP® iSeries platforms.
Fan tray airflow measurements are taken at 100% duty cycle and in open air.
Platform
Value (max)
i5000


97 CFM


i7000/i10000/i11000

146 CFM