Manual Chapter : Repackaging Guidelines

Applies To:

Show Versions Show Versions

BIG-IP DNS

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP PEM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP AFM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP Analytics

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP ASM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP APM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3

BIG-IP LTM

  • 15.0.1, 15.0.0, 14.1.2, 14.1.0, 14.0.1, 14.0.0, 13.1.3, 13.1.1, 13.1.0, 12.1.4, 12.1.3
Manual Chapter

Repackaging Guidelines

About repackaging the platform

If it becomes necessary to transport the platform to another location or return it to
F5®
Networks, these guidelines will help ensure that you repackage the platform properly.
You can perform a disk erase operation to erase all sensitive data from storage drives (for example, solid-state drives and hard disk drives) before you return a platform to
F5
. For more information, see
F5 Platforms: Essentials
at
support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/f5-plat-hw-essentials.html
.
Before returning any equipment, contact
F5
to obtain a Service Order (SO) or Return Material Authorization (RMA) case number.
You must use shipping materials and packaging provided by
F5
when repackaging the platform.
Be sure to keep a record of the tracking number and ship date. These will be needed to track lost shipments.
Do not include any cables, removable transceiver modules, GBICs, or other peripheral items if you are returning the platform to
F5
.

Repackage the platform

The
iSeries
platforms must be shipped in
F5®
-provided packaging.
To ensure your safety and to prevent damage to the platform, we highly recommend that you have at least two people remove the platform from the rack and repackage it into the shipping box.
  1. Halt the platform using the LCD panel.
  2. Disconnect the AC power cord
    or DC power supply terminal
    from the power supplies.
  3. Disconnect the network cables and other cables from the chassis, and then remove any optical modules.
  4. Remove the chassis from the rack.
  5. Remove all installation hardware from the chassis.
  6. Place the chassis onto the bottom foam in the shipping box.
  7. Place the top foam pieces into the slot on the bottom foam.
  8. Close and seal the shipping box.