Manual Chapter :
Platform Specifications
Applies To:
Show Versions
Platform Specifications
General specifications for system features
This table lists general specifications for
system features for BIG-IP® iSeries
platforms.
Item |
Specification |
|---|---|
Transceiver modules hot
swap |
Support for hot swap of optical
transceiver modules |
Fan tray hot swap |
Support for hot swap of the fan
tray Applies only to
i7000/i10000/i11000 Series platforms. |
Power supply hot swap |
Support for hot swap of the
power supplies in dual supply systems |
Jumbo frames |
Support for maximum Ethernet
frame size of 9216 bytes and MTU of 9128 bytes |
F5 Virtual Clustered
Multiprocessing (vCMP) |
Supports provisioning and
managing multiple, hosted instances of F5 software on
a single hardware device Supported only in platforms
running a high performance license (x800). |
F5®
TurboFlex™
Profiles |
TurboFlex Profiles are groupings
of hardware-accelerated (FPGA) features that are
associated with a specific use case. TurboFlex Profiles
are groupings of hardware-accelerated features that are
dependent on module licensing. If BIG-IP LTM is licensed and provisioned,
then the ADC profile is available. If BIG-IP AFM is
licensed and provisioned, then the Security profile is
available. TurboFlex Profiles are supported only in
platforms running a high performance license (x800). Also,
TurboFlex Profile availability varies depending on the
platform series tier. For more information, see F5 Platforms: TurboFlex
Profiles at techdocs.f5.com/en-us/hw-platforms/f5-platforms--turboflex-profiles.html. |
Hardware specifications - i5000 (i5600/i5800)
Series
This table lists hardware specifications for
i5000 (i5600/i5800) Series platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 1.72 inches (4.37 cm) x W: 17.4
inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per
unit) 1U industry standard rack-mount chassis
|
Weight |
24.5 pounds (11.11 kg) with one
power supply (per unit)
|
Processor |
1 x Quad-Core Intel®
Xeon®
processor (total 8 hyperthreaded logical processing
cores)
|
Communication interfaces |
8 x 10GbE SFP+ 4 x 40GbE QSFP+ fiber ports 1 x 1GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 2.0 interface |
Storage drive capacity |
1 to 2 x 480 GB solid-state
drives (SSDs) |
RAM |
48 GB
|
AC power supply |
1 x 650 W 100-240 VAC(+/- 10%)
AUTO Switching Platinum 1 x NEMA
5-15P power cords |
DC power supply |
2 x 650W DC Operating range: 44-72 VDC Minimum start up voltage: 44 VDC Power supply will
not start below 44 VDC. |
Specifications are subject to change without
notification.
Hardware specifications - i5000F (i5820-DF)
This table lists hardware specifications for
i5000 (i5600/i5800) Series platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 1.72 inches (4.37 cm) x W: 17.4
inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per
unit) 1U industry standard rack-mount chassis
|
Weight |
24.5 pounds (11.11 kg) with one
power supply (per unit)
|
Processor |
1 x Quad-Core Intel®
Xeon®
processor (total 8 hyperthreaded logical processing
cores)
|
FIPS hardware security module
(HSM) |
Cavium Nitrox III |
Communication interfaces |
8 x 10GbE SFP+ 4 x 40GbE QSFP+ fiber ports 1 x 1GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 2.0 interface |
Storage drive capacity |
2 x 480 GB solid-state drives
(SSDs) |
RAM |
48 GB
|
AC power supply |
1 x 650 W 100-240 VAC(+/- 10%)
AUTO Switching Platinum 1 x NEMA
5-15P power cords |
Specifications are subject to change without
notification.
Hardware
specifications - i7000 (i7600/i7800) Series
This table lists hardware specifications for
i7000 (i7600/i7800) Series platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 1.72 inches (4.37 cm) x W: 17.4
inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per
unit) 1U industry standard rack-mount chassis
|
Weight |
30.0 pounds (13.61 kg) with two
power supply units (PSUs) (per unit)
|
Processor |
1 x Six-Core Intel®
Xeon®
processor (total 12 hyperthreaded logical processing
cores)
|
Communication interfaces |
8 x 10GbE SFP+ 4 x 40GbE QSFP+ fiber ports 1 x 1GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 2.0 interface |
Storage drive capacity |
1 to 2 x 480 GB solid-state
drives (SSDs) |
RAM |
96 GB
|
AC power supply |
2 x 650 W 100-240 VAC(+/- 10%)
AUTO Switching Platinum 2 x NEMA
5-15P power cords |
DC power supply |
2 x 650W DC Operating range: 44-72 VDC Minimum start up voltage: 44 VDC Power supply will
not start below 44 VDC. |
High Voltage DC (HVDC) power
supply |
2 x 650W DC Operating range: 180-400 VDC Minimum start up voltage: 170
VDC Power supply will
not start below 170 VDC. |
Specifications are subject to change without
notification.
Hardware specifications - i7000F (i7820-DF)
This table lists hardware specifications for
i7000F (i7820-DF) platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 1.72 inches (4.37 cm) x W: 17.4
inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per
unit) 1U industry standard rack-mount chassis
|
Weight |
30.0 pounds (13.61 kg) with two
power supply units (PSUs) (per unit)
|
Processor |
1 x Six-Core Intel®
Xeon®
processor (total 12 hyperthreaded logical processing
cores)
|
FIPS hardware security module
(HSM) |
Cavium Nitrox III |
Communication interfaces |
8 x 10GbE SFP+ 4 x 40GbE QSFP+ fiber ports 1 x 1GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 2.0 interface |
Storage drive capacity |
2 x 480 GB solid-state drives
(SSDs) |
RAM |
96 GB
|
AC power supply |
2 x 650 W 100-240 VAC(+/- 10%)
AUTO Switching Platinum 2 x NEMA
5-15P power cords |
DC power supply |
2 x 650W DC Operating range: 44-72 VDC Minimum start up voltage: 44 VDC Power supply will
not start below 44 VDC. |
High Voltage DC (HVDC) power
supply |
2 x 650W DC Operating range: 180-400 VDC Minimum start up voltage: 170
VDC Power supply will
not start below 170 VDC. |
Specifications are subject to change without
notification.
Hardware specifications - i10000 (i10600/i10800)
Series
This table lists hardware specifications for
i10000 (i10600/i10800) Series platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 1.72 inches (4.37 cm) x W: 17.4
inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per
unit) 1U industry standard rack-mount chassis
|
Weight |
36.0 pounds (16.33 kg) with two
power supply units (PSUs) (per unit)
|
Processor |
1 x Eight-Core Intel®
Xeon®
processor (total 16 hyperthreaded logical processing
cores)
|
Communication interfaces |
8 x 10GbE SFP+ 6 x 40GbE QSFP+ fiber ports 1 x 1GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 2.0 interface |
Storage drive capacity |
1 to 2 x 480 GB solid-state
drives (SSDs) |
RAM |
128 GB
|
AC power supply |
2 x 650 W 100-240 VAC(+/- 10%)
AUTO Switching Platinum 2 x NEMA
5-15P power cords |
DC power supply |
2 x 650W DC Operating range: 44-72 VDC Minimum start up voltage: 44 VDC Power supply will
not start below 44 VDC. |
High Voltage DC (HVDC) power
supply |
2 x 650W DC Operating range: 180-400 VDC Minimum start up voltage: 170
VDC Power supply will
not start below 170 VDC. |
Specifications are subject to change without
notification.
Hardware
specifications - i10010 (i10610/i10810)
This table lists hardware specifications for
i10010 (i10610/i10810) platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 1.72 inches (4.37 cm) x W: 17.4
inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per
unit) 1U industry standard rack-mount chassis
|
Weight |
36.0 pounds (16.33 kg) with two
power supply units (PSUs) (per unit)
|
Processor |
1 x Eight-Core Intel®
Xeon®
processor (total 16 hyperthreaded logical processing
cores)
|
Communication interfaces |
4 x 40GbE QSFP+ 4 x 100GbE QSFP28 fiber ports 1 x 1GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 2.0 interface |
Storage drive capacity |
1 to 2 x 480 GB solid-state
drives (SSDs) |
RAM |
128 GB
|
DC power supply |
2 x 650W DC Operating range: 44-72 VDC Minimum start up voltage: 44 VDC Power supply will
not start below 44 VDC. |
High Voltage DC (HVDC) power
supply |
2 x 650W DC Operating range: 180-400 VDC Minimum start up voltage: 170
VDC Power supply will
not start below 170 VDC. |
Specifications are subject to change without
notification.
Hardware
specifications - i11000 (i11600/i11800) Series
This table lists hardware specifications for
i11000 (i11600/i11800) Series platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 1.72 inches (4.37 cm) x W: 17.4
inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per
unit) 1U industry standard rack-mount chassis
|
Weight |
36.0 pounds (16.33 kg) with two
power supply units (PSUs) (per unit)
|
Processor |
1 x 18-Core Intel®
Xeon®
processor (total 36 hyperthreaded logical processing
cores)
|
Communication interfaces |
8 x 10GbE SFP+ 6 x 40GbE QSFP+ fiber ports 1 x 1GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 2.0 interface |
Storage drive capacity |
1 x 960 GB solid-state drive
(SSD) |
RAM |
256 GB
|
AC power supply |
2 x 650 W 100-240 VAC(+/- 10%)
AUTO Switching Platinum 2 x NEMA
5-15P power cords |
DC power supply |
2 x 650W DC Operating range: 44-72 VDC Minimum start up voltage: 44 VDC Power supply will
not start below 44 VDC. |
High Voltage DC (HVDC) power
supply |
2 x 650W DC Operating range: 180-400 VDC Minimum start up voltage: 170
VDC Power supply will
not start below 170 VDC. |
Specifications are subject to change without
notification.
Hardware specifications - i11000S (i11800-S)
This table lists hardware specifications for
i11000S (i11800-S) platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 1.72 inches (4.37 cm) x W: 17.4
inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per
unit) 1U industry standard rack-mount chassis
|
Weight |
36.0 pounds (16.33 kg) with two
power supply units (PSUs) (per unit)
|
Processor |
1 x 18-Core Intel® Xeon® processor (total 36
hyperthreaded logical processing cores)
|
Communication interfaces |
8 x 10GbE SFP+ 6 x 40GbE QSFP+ fiber ports 1 x 1GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 2.0 interface |
Storage drive capacity |
1 x 960 GB solid-state drive
(SSD) |
RAM |
256 GB
|
AC power supply |
2 x 650 W 100-240 VAC(+/- 10%)
AUTO Switching Platinum 2 x NEMA
5-15P power cords |
Specifications are subject to change without
notification.
Hardware
specifications - i15000F (i15820-DF)
This table lists hardware specifications for
i15000-F (i15820-DF) platforms.
Item |
Specification |
|---|---|
Dimensions |
H: 3.45 inches (8.76 cm) x W: 17.9 inches (45.47 cm)
x D: 30.2 inches (76.71 cm) (per unit) 2U industry
standard rack-mount chassis
|
Weight |
76.00 pounds (34.47 kg) with two power supplies (per unit)
|
Processor |
2 x 14-Core Intel®
Xeon® processor (total 56
hyperthreaded logical processing cores)
|
FIPS hardware security module
(HSM) |
Cavium Nitrox III |
Communication interfaces |
4 x 100GbE QSFP28 fiber ports
8 x 40GbE QSFP+ fiber ports 1 x 10GbE management port 1 x RJ45 console port 1 x RJ45 failover port 1 x USB 3.0 interface |
Storage drive capacity |
2 x 1.92 TB solid-state drive (SSD) |
AC power supply |
2 x 1500 W 100-240 VAC(+/- 10%) AUTO Switching Platinum
2 x NEMA 5-15P power cords |
DC power supply |
2 x 1500W DC Operating range: 44-72 VDC Minimum start up voltage: 40 VDC Power supply will not start below 40
VDC. |
Specifications are subject to change without
notification.
Power specifications - i5000
(i5600/i5800) Series
This table lists power specifications for i5000 (i5600/i5800) Series
platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC power) |
110VAC input: 195W
220VAC input: 190W |
110VAC input: 205W 220VAC input: 205W |
Idle power draw (DC power) |
48VDC input: 195W |
48VDC input: 205W |
Typical power draw (AC power; 50% load; temp
25°C) |
110VAC input: 265W 220VAC input: 260W |
110VAC input: 265W 220VAC input: 265W |
Typical power draw (DC power; 50% load; temp
25°C) |
48VDC input: 260W |
48VDC input: 265W |
Maximum power draw (AC power) |
110VAC input: 330W
220VAC input: 325W |
110VAC input: 320W
220VAC input: 320W |
Maximum power draw (DC power) |
48VDC input: 320W |
48VDC input: 320W |
Typical heat generated (AC power) |
110VAC input: 905 BTU/hour
220VAC input: 890 BTU/hour |
110VAC input: 905 BTU/hour
220VAC input: 905 BTU/hour |
Typical heat generated (DC power) |
48VDC input: 890 BTU/hour |
48VDC input: 905 BTU/hour |
Maximum heat generated (AC power) |
220VDC input: 1130 BTU/hour |
220VDC input: 1130 BTU/hour |
Maximum heat generated (DC power) |
48VDC input: 1095 BTU/hour |
48VDC input: 1095 BTU/hour |
Specifications are subject to change without
notification.
Power specifications - i5000F
(i5820-DF)
This table lists power specifications for i5000F (i5820-DF)
platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC power) |
110VAC input: 230W 220VAC input: 225W |
110VAC input: 240W 220VAC input: 235W |
Typical power draw (AC power; 50% load; temp
25°C) |
110VAC input: 325W 220VAC input: 320W |
110VAC input: 340W 220VAC input: 330W |
Maximum power draw (AC power) |
110VAC input: 420W 220VAC input: 410W |
110VAC input: 435W 220VAC input: 420W |
Typical heat generated (AC power) |
110VAC input: 1110 BTU/hour 220VAC input: 1110 BTU/hour |
110VAC input: 1165 BTU/hour 220VAC input: 1130 BTU/hour |
Maximum heat generated (AC power) |
220VAC input: 1435 BTU/hour |
220VAC input: 1485 BTU/hour |
Specifications are subject to change without
notification.
Power
specifications - i7000 (i7600/i7800) Series
This table lists power specifications for i7000
(i7600/i7800) Series platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC
power) |
110VAC input: 210W
220VAC input: 210W |
110VAC input: 225W
220VAC input: 220W |
Idle power draw (DC /HVDC power) |
48VDC input: 205W 240VDC input: 250W 380VDC input: 255W |
48VDC input: 215W 240VDC input: 260W 380VDC input: 260W |
Typical power draw (AC power;
50% load; temp 25°C) |
110VAC input: 300W
220VAC input: 295W |
110VAC input: 310W
220VAC input: 305W |
Typical power draw (DC /HVDC power; 50% load; temp
25°C) |
48VDC input: 290W 240VDC input: 340W 380VDC input: 240W |
48VDC input: 300W 240VDC input: 350W 380VDC input: 250W |
Maximum power draw (AC
power) |
110VAC input: 390W
240VAC input: 380W |
110VAC input: 390W
240VAC input: 390W |
Maximum power draw (DC /HVDC power) |
48VDC input: 370W 240VDC input: 445W 380VDC input: 455W |
48VDC input: 380W 240VDC input: 455W 380VDC input: 465W |
Typical heat generated (AC
power) |
110VAC input: 1025 BTU/hour
220VAC input: 1010 BTU/hour |
110VAC input: 1060 BTU/hour
220VAC input: 1280 BTU/hour |
Typical heat generated (DC/HVDC power) |
48VDC input: 990 BTU/hour 240VDC input: 1165 BTU/hour 380VDC input: 1195 BTU/hour |
48VDC input: 1025 BTU/hour 240VDC input: 1195 BTU/hour 380VDC input: 1230 BTU/hour |
Maximum heat generated (AC
power) |
220VAC input: 1045 BTU/hour |
220VAC input: 1335 BTU/hour |
Maximum heat generated (DC /HVDC power) |
48VDC input: 1265 BTU/hour 240VDC input: 1520 BTU/hour 380VDC input: 1555 BTU/hour |
48VDC input: 1300 BTU/hour 240VDC input: 1555 BTU/hour 380VDC input: 1590 BTU/hour |
Specifications are subject to change without
notification.
Power
specifications - i7000F (i7820-DF)
This table lists power specifications for i7000F
(i7820-DF) Series platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC
power) |
110VAC input: 240W
220VAC input: 235W |
110VAC input: 245W
220VAC input: 250W |
Idle power draw (DC /HVDC
power) |
48VDC input: 235W 240VDC input: 250W 380VDC input: 255W |
48VDC input: 245W 240VDC input: 260W 380VDC input: 260W |
Typical power draw (AC power;
50% load; temp 25°C) |
110VAC input: 355W
220VAC input: 345W |
110VAC input: 360W
220VAC input: 355W |
Typical power draw (DC /HVDC
power; 50% load; temp 25°C) |
48VDC input: 350W 240VDC input: 350W 380VDC input: 355W |
48VDC input: 355W 240VDC input: 360W 380VDC input: 365W |
Maximum power draw (AC
power) |
110VAC input: 465W
240VAC input: 450W |
110VAC input: 470W
240VAC input: 460W |
Maximum power draw (DC /HVDC
power) |
48VDC input: 460W 240VDC input: 450W 380VDC input: 455W |
48VDC input: 465W 240VDC input: 460W 380VDC input: 465W |
Typical heat generated (AC
power) |
110VAC input: 1215 BTU/hour
220VAC input: 1180 BTU/hour |
110VAC input: 1230 BTU/hour
220VAC input: 1215 BTU/hour |
Typical heat generated (DC /HVDC
power) |
48VDC input: 1195 BTU/hour 240VDC input: 1195 BTU/hour 380VDC input: 1215 BTU/hour |
48VDC input: 1215 BTU/hour 240VDC input: 1230 BTU/hour 380VDC input: 1250 BTU/hour |
Maximum heat generated (AC
power) |
220VAC input: 1590 BTU/hour |
220VAC input: 1605 BTU/hour |
Maximum heat generated (DC /HVDC
power) |
48VDC input: 1570 BTU/hour 240VDC input: 1540 BTU/hour 380VDC input: 1555 BTU/hour |
48VDC input: 1590 BTU/hour 240VDC input: 1570 BTU/hour 380VDC input: 1590 BTU/hour |
Specifications are subject to change without
notification.
Power
specifications - i10000 (i10600/i10800) Series
This table lists power specifications for i10000
(i10600/i10800) Series platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC
power) |
110VAC input: 290W
220VAC input: 285W |
110VAC input: 300W
220VAC input: 295W |
Idle power draw (DC /HVDC
power) |
48VDC input: 285W 240VDC input: 310W 380VDC input: 315W |
48VDC input: 295W 240VDC input: 320W 380VDC input: 325W |
Typical power draw (AC power;
50% load; temp 25°C) |
110VAC input: 405W
220VAC input: 400W |
110VAC input: 415W
220VAC input: 410W |
Typical power draw
(DC /HVDC power; 50% load; temp 25°C) |
48VDC input: 400W 240VDC input: 420W 380VDC input:425W |
48VDC input: 405W 240VDC input: 430W 380VDC input: 430W |
Maximum power draw (AC
power) |
110VAC input: 520W
240VAC input: 510W |
110VAC input: 525W
240VAC input: 520W |
Maximum power draw
(DC /HVDC power) |
48VDC input: 510W 240VDC input: 525W 380VDC input: 535W |
48VDC input: 510W 240VDC input: 535W 380VDC input: 535W |
Typical heat generated (AC
power) |
110VAC input: 1385 BTU/hour
220VAC input: 1365 BTU/hour |
110VAC input: 1420 BTU/hour
220VAC input: 1400 BTU/hour |
Typical heat generated
(DC /HVDC power) |
48VDC input: 1365 BTU/hour 240VDC input: 1435 BTU/hour 380VDC input: 1455 BTU/hour |
48VDC input: 1745 BTU/hour 240VDC input: 1470 BTU/hour 380VDC input: 1470 BTU/hour |
Maximum heat generated (AC
power) |
220VAC input: 1775
BTU/hour |
220VAC input: 1795
BTU/hour |
Maximum heat generated
(DC /HVDC power) |
48VDC input: 1385 BTU/hour 240VDC input: 1795 BTU/hour 380VDC input: 1830 BTU/hour |
48VDC input: 1745 BTU/hour 240VDC input: 1830 BTU/hour 380VDC input: 1830 BTU/hour |
Specifications are subject to change without
notification.
Power
specifications - i11000 (i11600/i11800) Series
This table lists power specifications for i11000
(i11600/i11800) Series platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC power) |
110VAC input: 340W 220VAC input: 330W |
110VAC input: 340W 220VAC input: 330W |
Typical power draw (AC power; 50% load; temp
25°C) |
110VAC input: 460W 220VAC input: 440W |
110VAC input: 455W 220VAC input: 440W |
Maximum power draw (AC power) |
110VAC input: 575W 240VAC input: 550W |
110VAC input: 570W 240VAC input: 550W |
Typical heat generated (AC power) |
110VAC input: 1570 BTU/hour 220VAC input: 1505 BTU/hour |
110VAC input: 1555 BTU/hour 220VAC input: 1505 BTU/hour |
Maximum heat generated (AC power) |
1965 BTU/hour |
1945 BTU/hour |
Specifications are subject to change without
notification.
Power specifications - i11000S
(i11400-DS/i11600-DS/i11800-DS)
This table lists power specifications for i11000S (i11400-DS/i11600-DS/i11800-DS) Series
platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC power) |
110VAC input: 295W
220VAC input: 290W |
110VAC input: 305W
220VAC input: 295W |
Typical power draw (AC power; 50% load; temp
25°C) |
110VAC input: 435W 220VAC input: 425W |
110VAC input: 435W 220VAC input: 430W |
Maximum power draw (AC power) |
110VAC input: 575W
240VAC input: 560W |
110VAC input: 565W
240VAC input: 560W |
Typical heat generated (AC power) |
110VAC input: 1485 BTU/hour
220VAC input: 1455 BTU/hour |
110VAC input: 1485 BTU/hour
220VAC input: 1470 BTU/hour |
Maximum heat generated (AC power) |
1965 BTU/hour |
1930 BTU/hour |
Specifications are subject to change without
notification.
Power
specifications - i15000-DF (i15820-DF)
This table lists power specifications for
i15000-DF (i15820-DF) platforms.
Item |
Single power supply |
Dual power supply |
|---|---|---|
Idle power draw (AC
power) |
110VAC input: 565W 220VAC
input: 555W |
110VAC input: 585W 220VAC
input: 575W |
Idle power draw (DC
power) |
48VDC input: 565W |
48VDC input: 575W |
Typical power draw (AC power;
50% load; temp 25°C) |
110VAC input: 800W 220VAC
input: 785W |
110VAC input: 815W 220VAC
input: 800W |
Typical power draw (DC power;
50% load; temp 25°C) |
48VDC input: 810W |
48VDC input: 815W |
Maximum power draw (AC
power) |
110VAC input: 1030W 220VAC
input: 1010W |
110VAC input: 1040W 220VAC
input: 1025W |
Maximum power draw (DC
power) |
48VDC input: 1050W |
48VDC input: 1055W |
Typical heat generated (AC
power) |
110VAC input: 2730 BTU/hour 220VAC input: 2680 BTU/hour |
110VAC input: 2785 BTU/hour 220VAC input: 2730 BTU/hour |
Typical heat generated (DC
power) |
48VDC input: 2765 BTU/hour |
48VDC input: 2785 BTU/hour |
Maximum heat generated (AC
power) |
3515 BTU/hour |
3550 BTU/hour |
Maximum heat generated (DC
power) |
3585 BTU/hour |
3600 BTU/hour |
Specifications are subject to change without
notification.
Environmental operating
specifications
This table lists platform environmental operating
specifications.
Item |
Specification |
|---|---|
Operational temperature |
32 to 104°F (0 to 40°C) |
Operational relative humidity |
5% to 85% (40°C) non-condensing Up to 93% (40°C) non-condensing for a maximum of 96 hours |
Non-operational temperature |
-40 to 158°F (-40 to 70°C) |
Non-operational relative humidity |
5% to 93% (40°C) non-condensing |
Safety requirements
This equipment complies with these requirements of the Low Voltage Directive
2014/35/EU:
EC Type Examination
Certificates: Master Contract 252302 |
|
CB Scheme |
|
EN
60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 |
|
IEC 60950-1:2005,
A1:2009+A2:2013 |
|
CSA 60950-1-07, Including
A1:2011+A2:2014 |
|
ANSI/UL 60950-1-2014 |
EMC requirements
USA--FCC Class A, Canada--Industry Canada Class A
This equipment complies with Part 15 of FCC Rules. Operation is subject to these two
conditions:
- This equipment may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
European Union
This equipment complies with these requirements of the EMC Directive 2014/30/EU:
As Telecommunication Network Equipment (TNE) in Both Telecom Centers and
Other than Telecom Centers per (as applicable):
ETSI EN 300 386 V1.6.1 (2012) |
EN 55032:2012/AC:2013 |
EN 61000-3-2:2014 |
EN 61000-3-3:2013 |
As Information Technology Equipment (ITE) Class A per (as applicable):
EN 55024:2010 |
EN 55032:2012/AC:2013 |
EN 61000-3-2:2014 |
EN 61000-3-3:2013 |
Acoustic and altitude
specifications
This table lists acoustic levels and operational altitude specifications
for iSeries platforms.
Specification type |
Detail |
Value |
Notes |
|---|---|---|---|
Acoustic |
Sound power |
72.72
dBA |
A-weighted Sound Power at 27°C full system
load. |
Altitude |
Operational |
6,000 Feet |
Per Telcordia GR-63-CORE, section 4.1.3: This unit is
functional when installed at elevations between 60m (197
feet) below sea level and 1800m (6000 feet) above sea
level at the aisle ambient temperatures of 40°C. NEBS-certified platforms conform to NEBS
specifications above 6000 feet. |
Non-operational |
40,000 Feet |
Airflow specifications
This table lists airflow movement specifications for BIG-IP®
iSeries platforms.
Fan tray airflow measurements
are taken at 100% duty cycle and in open air.
Platform |
Value (max) |
|---|---|
i5000 |
97 CFM |
i7000/i10000/i11000 |
146 CFM |
