Manual Chapter :
EUD_C
Applies To:
Show Versions
EUD_C
New in EUD_C
EUD_C is now deprecated and has been replaced by EUD_CF. See the section on
EUD_CF for the latest updates.
New in EUD_C 14.3.0
EUD_C 14.3.0: EUD_C fixes
This release adds these fixes to EUD_C.
Title |
ID Number |
Description |
|---|---|---|
Unable to stop Mezzanine RAM test |
ID 425482 |
Added an option to stop the Mezzanine RAM test after
the test has been initiated. |
Test 25 Chassis Data Plane Test fails |
ID 425686 |
F5 recommends running chassis-level tests on only one
blade at a time; otherwise, chassis-level tests, such as
the Chassis Data Plane test, might fail if other blades
are running chassis-level tests or passing traffic. This
is the expected behavior. |
Extend data plane testing to cover all backplane
interfaces |
ID 469862 |
Enhanced the Chassis Data Plane Test to test all
backplane interfaces and extended the Chassis Data Plane
Test on the VIPRION 4400 Series chassis. |
New in EUD_C 14.2.0
EUD_C 14.2.0: Updated firmware and BIG-IP compatibility
New firmware images released in BIG-IP version 11.4.0 were incompatible
with the existing EUD_C package. This release ensures compatibility
between the EUD_C package and BIG-IP version 11.4.0 (ID 421987).
New in EUD_C 14.1.0
EUD_C 14.1.0: New hardware support
This release supports the VIPRION 4800 chassis.
New in EUD_C 14.0.0
EUD_C 14.0.0: EUD_C fixes
This release adds these fixes to EUD_C.
Title |
ID Number |
Description |
|---|---|---|
Blade and chassis test summary output for Alarm and
Status LEDs |
ID 374304 |
Fixed an issue where it was difficult to determine from
the test summary if an error on the LCD test was on the
blade or the chassis front bezel. The test summary now
clearly distinguishes the difference. |
EUD Host RTC_BAT is too low |
ID 379371 |
Fixed an issue where a battery voltage error was
produced when the battery voltage was within tolerance. |
New in EUD_C 12.1.0
EUD_C 12.1.0: Test summary for LED tests on blades and front bezel
This release corrects how the test summary is displayed. The test summary now clearly
distinguishes if an error on the LED test was for the blade or the chassis front
bezel (ID 378304).
New in EUD_C 12.0.0
EUD_C 12.0.0: New hardware support
This release includes support for the VIPRION B4300 blade.
F5 recommends that you back up your configuration before
running the update.
