Manual Chapter :
EUD_VF
Applies To:
Show Versions
EUD_VF
New in EUD_VF 15.2.0
EUD_VF 15.2.0: EUD_VF fixes
This release adds these fixes to EUD_VF.
Menu item "B" added to EUD_VF |
ID 503008 |
This release adds the B option to the EUD_VF menu. The
new B command runs all blade tests, excluding the memory
test. This new menu item exists in the EUD for other
platform families. |
New in EUD_VF 15.1.0
EUD_VF 15.1.0: New hardware support
This release adds support for the VIPRION 2200 DC-powered chassis.
EUD_VF 15.1.0: EUD_VF fixes
This release adds these fixes to EUD_VF.
Support for CD installation in EUD |
ID 496768 |
This EUD package no longer supports CD installation. |
New in EUD_VF 15.0.1
EUD_VF 15.0.1: EUD_VF fixes
This release adds these fixes to EUD_VF.
Title |
ID Number |
Description |
|---|---|---|
Update EUD Sensor Report to accommodate Octeon voltage
change to 1.1v |
ID 442131 |
The mezzanine board voltage on VIPRION B2100 Series
blades is now 1.100v. |
Suppress BCM8325 Retimer register messages |
ID 446960 |
Benign messages related to the BCM8325 Retimer
Registers no longer display when EUD boots on VIPRION 2250
blades. |
EUD VIPRION 2000 Series USB LCD module: Enhance LCD to
display all tests running |
ID 449031 |
All tests now display PASS/FAIL information when
running the all test suite. If you want the USB LCD module
to display the PASS/FAIL information of tests, you must
connect the USB LCD module to the blade before booting to
EUD and keep it connected for the duration of the test
cycle. |
EUD_VF incorrectly reports that a failed test was
interrupted |
ID 453404 |
When running the Mezzanine RAM test, EUD_VF no longer
incorrectly reports that a failed test was interrupted. |
New in EUD_VF 15.0.0
EUD_VF 15.0.0: New hardware support
This release combines support for the VIPRION B2100, B2150, and B2250
blades into a single EUD package, and adds support for the VIPRION 2200
AC-powered chassis.
EUD_VF 15.0.0: EUD_VF fixes
This release adds these fixes to EUD_VF.
Title |
ID Number |
Description |
|---|---|---|
EUD Sensor Test limits for 12V standby voltage |
ID 370665 |
Implemented standby voltage limits in EUD for B2000
Series blades. |
PCI Messages (BCM) displayed on CLI while booting to EUD |
ID 430617 |
Benign PCI messages no longer display when booting to
EUD on B2100 Series blades from USB, HDD, or CD/DVD. |
LED test results summary contain unintended content |
ID 430627 |
Extraneous characters no longer display when running
the LED test on B2100 Series blades. |
Chassis Data Plane Test Content |
ID 430636 |
The time estimation message now appears as soon as it
is calculated, rather than after the test completes. |
ACPI error reported in dmesg or /var/log/messages |
ID 434365 |
There is no longer an "ACPI Error" line in dmesg or
/var/log/messages when booting to EUD
on B2100 Series blades. |
SFP modules shows a higher optical power output for
disabled switch ports |
ID 436682 |
SFP modules no longer show a higher optical power
output for disabled switch ports, so there are no false
link states reported. |
