Applies To:Show Versions
- 15.0.1, 15.0.0, 14.1.2, 14.1.0
Usage Monitoring Over a Gx Interface
Overview: Usage monitoring over a Gx and Sd interface
In Policy Enforcement Manager™, you can create a rule within an enforcement policy that tells the system to send aggregated usage data concerning individual subscribers to a Policy and Charging Rules Function (PCRF). The rule specifies what type of traffic you are interested in, and one of the actions the system can take with the data collected is to send it for processing over a Gx interface to a PCRF.
The system sends the data in the standard Gx format. The report granularity must be set to session for Gx reporting to be available. The PCRF determines the policies for each subscriber, whether or not reporting is enabled, and how often to send the data and monitoring key that identifies the type of traffic PCRF wants to get usage for.
Similarly, the Traffic Dectection function (TDF) functionality performs applications traffic detection and reporting of detected application by using TDF application identifier. The Policy Enforcement Manager™ supports the Sd interface which is used by PCRF to talk to TDF. This provides the ability to apply the detection, enforce actions and apply charging parameters for the specified application traffic.
For example, a rule might collect session-based information about all traffic destined to a particular IP address. The BIG-IP® system communicates with the PCRF and sends information about the subscribers for whom reporting is enabled. You establish the connection to the PCRF by creating a listener with Gx interface enabled.
Creating a listener for subscriber discovery and policy provisioning
On the Main tab, click
.The Control Plane Listeners page opens.
In the Policy Provisioning and Online Charging Virtuals area, click
The New Configure Diameter Endpoint Provisioning and Online Charging screen opens.
- In the Name field, type a unique name for the listener.
- In the Description field, type a description of the listener.
- For the VLANs and Tunnels setting, move the VLANs and tunnels that you want to monitor from the Available list to the Selected list.
- To connect to a PCRF, from the Diameter Endpoint list, select Enabled and select Gx or Sdfrom the Supported Apps options.
- In the Product Name field, type the product name which is used to communicate with the PCRF.
- In the Origin Host field, type the fully qualified domain name of the PCRF or external policy server, for example, ocs.xnet.com.
- In the Origin Realm field, type the realm name or network in which the PCRF resides, for example, xnet.com.
- In the Destination Host field, type the destination host name of the PCRF or external policy server, for example, pcrfdest.net.com.
- In the Destination Realm field, type the realm name or network of the PCRF, for example, net.com.
- For the Pool Member Configuration setting, add the PCRF servers that are to be members of the Gx endpoint pool. Type the Member IP Address and Port number, then click Add.
- In the Message Retransmit Delay field, type the number of milliseconds to wait before retransmitting unanswered messages in case of failure from the BIG-IP system to the PCRF over the Gx interface. The default value is 1500.
- In the Message Max Retransmit field, type the maximum number of times that messages can be retransmitted from the BIG-IP system to the PCRF. The default value is 2.
- In the Fatal Grace Time field, type the time period in seconds that a diameter connection can remain disconnected before the system terminates all sessions associated with that diameter endpoint. The default value is 500.
The Policy Enforcement Manager creates a listener.
Creating a rule for usage monitoring
On the Main tab, click
. The Policies screen opens.
Click the name of the enforcement policy you want to add rules to.
The properties screen for the policy opens.
In the Policy Rules area, click Add.
The New Rule screen opens.
- In the Name field, type a name for the rule.
In the Precedence field, type an integer that indicates the
precedence for the rule in relation to the other rules. Number 1 has the highest
precedence. Rules with higher precedence are evaluated before other rules with lower
Tip: All rules in a policy are run concurrently. Precedence takes effect when there are conflicting rules. The conflict occurs when the traffic matches two rules and the policy actions from these rules differ. For example, if you have rule 1 with precedence 10 and Gate Status disabled for a search engine, and you have rule 2 with precedence 11 and Gate Status enabled, then rule 1 is processed first because it has higher precedence. Rules conflict if they have identical or overlapping classification criteria (for the traffic that matches more than one rule). In some cases, different policy actions are not conflicting, and hence, applied in parallel.
- Use the Classification, URL, Flow, and Custom Criteria tabs to identify the traffic that you want to be affected by this rule.
- From the Usage Reporting list, select Enabled.
From the Report Granularity list, select
You can send only session-based reporting data over the Gx interface.
- For the Volume Threshold setting, specify, in octets, the amount of data to receive from the client, send to the client, and the total traffic volume before logging the information.
For the Destination setting, specify these values:
- For Gx or Sd, select Enabled.
- In the Gx Monitoring Key or Sd Monitoring Keyfield (as selected), type a string to use for usage monitoring of the service data that the enforcement policy rule or dynamic policy and charging control (PCC) rule controls.
- Click Finished.