Manual Chapter :
What is a lease pool
Applies To:
Show Versions
BIG-IP APM
- 13.0.1, 13.0.0
A lease pool specifies a group of IPv4 or IPv6 IP addresses as a single object. You can use a lease pool to associate that group of IP addresses with a network access resource. When you assign a lease pool to a network access resource, network access clients are automatically assigned unallocated IP addresses from the pool during the network access session.
Important: Network access with IPv6 alone is not supported. An IPv6 tunnel
requires a simultaneous IPv4 tunnel, which is automatically established when you assign
IPv4 and IPv6 lease pools, and set the version to
IPv4&IPv6.
Creating an IPv4 lease pool
Create a lease pool to provide internal network addresses for network
access tunnel users.
A lease pool is created with the IP address or IP address range you
specified.
To delete an IP address or IP address range, select the IP address or IP address
range in the member list, and click the Delete button.
Creating an IPv6 lease pool
Create a lease pool to provide internal network addresses for network access
tunnel users.
Important: Network access with IPv6 alone is not supported. An
IPv6 tunnel requires a simultaneous IPv4 tunnel, which is automatically established
when you assign IPv4 and IPv6 lease pools, and set the version to
IPv4&IPv6.
A lease pool is created with the IP address or IP address range you
specified.
To delete an IP address or IP address range, select the IP address or IP address
range in the member list, and click the Delete button.
