An External Logon page action provides a link to a logon page on an external server. An external solution can then provide robust logon credentials to the access policy. A logon action typically precedes the authentication action that checks the credentials provided on the logon page.

When an access policy reaches the External Logon page action:

• Access Policy Manager^® sends an HTML page containing JavaScript code that redirects users to the external server.
• The client submits a post_url variable. This post_url variable is used by the external application to return a value to the access policy. When the user completes authentication on the external server, the external server posts back to the URL specified in this variable, to continue the session.

  The value of post_URL is in the format: http(or https)://Access_Policy_Manager_URI/my.policy. The Access_Policy_Manager_URI is the URI visible to the user, taken from the HTTP Host header value sent by the browser.

An External Logon Page action provides these configuration elements and options:

External Logon Server URI

Specifies the URI of the external logon server.

Split domain from full username

Specifies Yes or No.

• Yes - specifies that when a username and domain combination is submitted (for example, marketing\jsmith or jsmith@marketing.example.com), only the username portion (in this example, jsmith) is stored in the session variable session.logon.last.username.
• No - specifies that the entire username string is stored in the session variable.

The HTTP 401 Response action sends an HTTP 401 Authorization Required Response page to capture HTTP Basic or Negotiate authentication.

The HTTP 401 Response action provides up to three branches: Basic, Negotiate, and fallback. Typically, a basic type of authentication follows on the Basic branch and a Kerberos Auth action follows on the Negotiate branch.

An HTTP 401 Response action provides these configuration elements and options.

Basic Auth Realm

Specifies the authentication realm for use with Basic authentication.

HTTP Auth Level

Specifies the authentication required for the policy.

• none - specifies no authentication.
• basic - specifies Basic authentication only.
• negotiate - specifies Kerberos authentication only.
  Note: This option is not available for a per-request policy subroutine.
• basic+negotiate - specifies either Basic or Kerberos authentication.
  Note: This option is not available for a per-request policy subroutine.

The action provides customization options that specify the text to display on the screen.

Language

Specifies the language to use to customize this HTTP 401 response page. Selecting a language causes the content in the remaining fields display in the selected language.

Note: Languages on the list reflect those that are configured in the access profile.

Logon Page Input Field #1

Specifies the text to display on the logon page to prompt for input for the first field. When Language is set to en, this defaults to Username.

Logon Page Input Field #2

Specifies the text to display on the logon page to prompt for input for the second field. When Language is set to en, this defaults to Password.

HTTP response message

Specifies the text that appears when the user receives the 401 response, requesting authentication.

The HTTP 407 response action sends an HTTP 407 Proxy Authentication Required page to capture HTTP Basic or Negotiate authentication. The HTTP 407 Response action provides three branches: Basic, Negotiate, and fallback. Typically, a basic type of authentication follows on the Basic branch and a Kerberos Auth action follows on the Negotiate branch. An HTTP 407 response action provides these configuration elements and options:

The action provides 407 response settings.

Basic Auth Realm

Specifies the authentication realm for use with Basic authentication.

HTTP Auth Level

Specifies the authentication required for the access policy.

• none - specifies no authentication.
• basic - specifies Basic authentication only.
• negotiate - specifies Kerberos authentication only.
• basic+negotiate - specifies either Basic or Kerberos authentication.

The action provides customization options that specify the text to display on the screen.

Language

Specifies the language to use to customize this HTTP 407 response page. Selecting a language causes the content in the remaining fields display in the selected language.

Note: Languages on the list reflect those that are configured in the access profile.

Logon Page Input Field #1

Specifies the text to display on the logon page to prompt for input for the first field. When Language is set to en, this defaults to Username.

Logon Page Input Field #2

Specifies the text to display on the logon page to prompt for input for the second field. When Language is set to en, this defaults to Password.

HTTP response message

Specifies the text that appears when the user receives the 407 response, requesting authentication.

A logon page action prompts for a user name and password, or other identifying information. The logon page action typically precedes the authentication action that checks the credentials provided on the logon page. The logon page action provides up to five customizable fields and enables localization.

The logon page action provides these configuration options and elements.

Split domain from full username

Specifies Yes or No.

• Yes - specifies that when a username and domain combination is submitted (for example, marketing\jsmith or jsmith@marketing.example.com), only the username portion (in this example, jsmith) is stored in the session variable session.logon.last.username.
• No - specifies that the entire username string is stored in the session variable.

CAPTCHA configuration

Specifies a CAPTCHA configuration to present for added CAPTCHA security on the logon page.

Type

Specifies the type of logon page input field: text, password, select, checkbox, or none.

• text Displays a text field, and shows the text that is typed in that field.
• password Displays an input field, but displays the typed text input as asterisks.
• select Displays a list. The list is populated with values that are configured for this field.
• checkbox Displays a check box.
• none Specifies that the field is not displayed on the logon page.

Post Variable Name

Specifies the variable name that is prepended to the data typed in the text field. For example, the POST variable username sends the user name input omaas as the POST string username=omaas.

Session Variable Name (or Subsession Variable Name)

Specifies the session variable name that the server uses to store the data typed in the text field. For example, the session variable username stores the username input omaas as the session variable string session.logon.last.username=omaas.

Note: A per-request policy subroutine uses subsession variables in place of session variables.

Clean Variable

Specifies whether to clear any value from the variable before presenting the logon page to the user; to clean the variable, select Yes. Defaults to No.

Values

Specifies values for use on the list when the input field type is select.

Read Only

Specifies whether the logon page agent is read-only, and always used in the logon process as specified. You can use Read Only to add logon POST variables or session variables that you want to submit from the logon page for every session that uses this access policy, or to populate a field with a value from a session variable. For example, you can use the On-Demand Certificate agent to extract the CN (typically the user name) field from a certificate, then you can assign that variable to session.logon.last.username. In the logon page action, you can specify session.logon.last.username as the session variable for a read only logon page field that you configure. When Access Policy Manager^® displays the logon page, this field is populated with the information from the certificate CN field (typically the user name).

Additionally, customization options specify text and an image to display on the screen.

Language

Specifies the language to use to customize this logon page. Selecting a language causes the content in the remaining fields to display in the selected language.

Note: Languages on the list reflect those that are configured in the access profile.

Form Header Text

Specifies the text that appears at the top of the logon box.

Logon Page Input Field # number

Specifies the text to display for each input field (number 1 through 5) that is defined in the Logon Page Agent area with Type set to other than none.

Logon Button

Specifies the text that appears on the logon button, which a user clicks to post the defined logon agents.

Front Image

Specifies an image file to display on the logon page. The Replace Image link enables customization and the Revert to Default Image discards any customization and use the default logon page image.

Save Password Check Box

Specifies the text that appears adjacent to the check box that allows users to save their passwords in the logon form. This field is used only in the secure access client, and not in the web client.

New Password Prompt

Specifies the prompt displayed when a new Active Directory password is requested.

Verify Password Prompt

Specifies the prompt displayed to confirm the new password when a new Active Directory password is requested.

Password and Password Verification do not Match

Specifies the prompt displayed when a new Active Directory password and verification password do not match.

Don't Change Password

Specifies the prompt displayed when a user should not change password.

A virtual keyboard displayed on the logon screen prevents password characters from being typed on the physical keyboard. The virtual keyboard appears on the logon screen when a user clicks in the password field. A user then types the password by clicking the characters on the virtual keyboard, instead of typing them on the physical keyboard.

A virtual keyboard action applies to all logon page actions that follow it in the access policy.

The virtual keyboard action provides these configuration elements and options:

Virtual Keyboard

Specifies whether the onscreen virtual keyboard is enabled or disabled.

Move Keyboard After Every Keystroke

Specifies whether the onscreen keyboard moves after the user enters a keystroke with a mouse click.

Allow Manual Input

Specifies whether a user can type the password with the physical keyboard, in addition to clicking keys on the virtual keyboard.

A VMware View logon page action can display a message or can request Windows, RSA SecurID, or RADIUS logon credentials. A logon action typically precedes the authentication action that checks the credentials provided on the logon page.

The VMware View logon page provides these configuration elements and options:

VMware View logon screen

Specifies the type of logon screen to display:

• Windows Password - requests Windows logon credentials.
• RSA SecurID - requests RSA SecurID logon credentials.

• RADIUS - requests RADIUS credentials.
• Disclaimer - displays a message dialog box; for example, to display acceptable use terms.

VMware View Windows Domains

Specifies domain names separated by commas; for use with the Windows Password screen.

VMware View RADIUS Auth Label

Specifies the name of the RADIUS authentication provider to display on the RADIUS logon screen in a message similar to this one: Please provide your Auth Label credentials

The VMware View logon page action also provides customization options to specify the text to display on the screen:

Language

Specifies the language to use to customize this logon page. Selecting a language causes the content in the remaining fields display in the selected language.

Note: Languages on the list reflect those that are configured in the access profile.

Logon Page Input Field #1

Specifies the text to display on the logon page to prompt for input for the first field. When Language is set to en, this defaults to Username.

Logon Page Input Field #2

Specifies the text to display on the logon page to prompt for input for the second field. When Language is set to en, this defaults to Password.

Disclaimer message

Specifies a message to display in the disclaimer logon screen.

An ACL Assign action dynamically assigns static access control lists (ACLs). ACLs then apply only to clients that reach such an assignment action in the access policy. An ACL Assign action provides these configuration elements and options: selection of static ACLs from those configured in Access Policy Manager^®.

When no ACLs are assigned in an access policy, the default behavior allows access. When an ACL is assigned in an access policy, it can restrict resources to only those specified in the ACL provided that the last ACE in the list is configured to reject any connection not matched by a previous entry.

The AD Group Resource Assign action enables users to create entries that specify Active Directory groups and assign resources to them.

An AD Group Resource Assign action provides these configuration elements and options:

Groups

Specifies the AD groups to which resources are assigned. A list of groups can be imported through the AD AAA server and created manually by typing group names.

Resources

Specifies Static ACLS, Network Access resources, App Tunnels, and so on to assign to the selected groups. Any resource on the system can be assigned to a group. The system limits apply; for example, only one webtop should be assigned to a group.

The Advanced Resource Assign action enables assignment of resources.

An Advanced Resource Assign action provides these configuration elements and options:

Resource type

Specifies a type of resource (one per tab), and on each tab provides a check list or radio button list of such resources for selection. Resource types include: Network Access, Portal Access, App Tunnels, Remote Desktops, Static ACLs, SAML, Webtops, Webtop Links, Webtop Sections, and Static Pools.

The BWC Policy action enables users to assign bandwidth control (BWC) policies to the traffic that passes through the virtual server.

A BWC Policy action provides these configuration elements and options:

Static BWC policies

Specifies one or more static BWC policies from those configured on the BIG-IP^® system.

Dynamic BWC Policy

Specifies the name of one dynamic BWC policy that was configured to shape traffic for Citrix clients that support MultiStream ICA.

Very High Citrix BWC Category

Specifies the name of the category in the BWC policy that assigns a percentage of the maximum bandwidth to a very high level of Citrix traffic.

High Citrix BWC Category

Specifies the name of the category in the BWC policy that assigns a percentage of the maximum bandwidth to a high level of Citrix traffic.

Very High Citrix BWC Category

Specifies the name of the category in the BWC policy that assigns a percentage of the maximum bandwidth to a medium level of Citrix traffic.

Very High Citrix BWC Category

Specifies the name of the category in the BWC policy that assigns a percentage of the maximum bandwidth to a low level of Citrix traffic.

Note: For more information, refer to BIG-IP^® Access Policy Manager^®: Third-Party Integration Implementations on the AskF5™ web site (http://support.f5.com/kb/en-us.html).

The Citrix Smart Access action enables users to assign Citrix SmartAccess filters to the session. A filter is a name; it is defined in a Citrix software product.

A Citrix Smart Access action provides these configuration elements and options:

Assignment

One or more entries each of which specifies the name of a filter. The name must match the name that is specified in the Citrix software product.

For more information, refer to BIG-IP^® Access Policy Manager^®: Third-Party Integration Implementations on the AskF5™ web site (http://support.f5.com/kb/en-us.html).

Use this action to add dynamic ACLs to a policy branch.

A Dynamic ACL action provides these configuration elements and options:

Source

Specifies a type of session variable (Custom or CiscoAV-PairVSA) and the source session variable from which the dynamic ACL is derived. For Custom dynamic ACL entries, this is any session variable that is populated with an f5 format ACL. For CiscoAV-PairVSA dynamic ACL entries, this is predefined as session.radius.last.attr.vendor-specific.1.9.1.

ACL

Specifies the dynamic ACL container configured on the BIG-IP^® system.

Format

Specifies the format (F5 or Cisco) in which the ACL is specified.

The LDAP Group Resource Assign action enables users to create entries that specify LDAP groups and assign resources to them.

An LDAP Group Resource Assign action provides these configuration elements and options:

Groups

Specifies the LDAP groups to which resources are assigned. A list of groups can be imported through the LDAP AAA server and created manually by typing group names.

Resources

Specifies Static ACLS, Network Access resources, App Tunnels, and so on to assign to the selected groups. Any resource on the system can be assigned to a group. The system limits apply; for example, only one webtop should be assigned to a group.

The Pool Assign agent can dynamically assign a local traffic pool; it provides this configuration element only: selection of a static pool.

In a per-session policy, the Pool Assign agent enables session-based pool selection from among valid pools in this priority order: a pool selected by an iRule that is defined for the virtual server takes precedence over any other; a static pool defined in the Pool Assign agent takes precedence over a static pool defined for the virtual server.

In a per-request policy, the Pool Assign agent enables request-based pool selection for reverse proxy (LTM+APM) only. In a per-request policy, the pool specified in Pool Assign agent is assigned.

The Resource Assign action assigns connection resources to a session.

A Resource Assign action provides these configuration elements and options:

Network Access

Specifies the names of one or more network access resources.

Portal Access

Specifies the names of one or more portal access resources.

App Tunnel

Specifies the names of one or more application tunnels.

Remote Desktop

Specifies the names of one or more remote desktops.

SAML

Specifies the names of one or more SAML resources.

The Route Domain and SNAT Selection action enables dynamic assignment of a route domain and of SNAT.

A Route Domain and SNAT Selection action provides these configuration elements and options:

Route Domain

Specifies a route domain. Enables route domain-based policy routing, sending a user to another route domain based on the outcomes of previous branches in the access policy.

SNAT

Specifies a SNAT to provide secure network address translation (SNAT) to the self IP address of the BIG-IP^® device, or to choose from a pool of configured internal addresses for SNAT. SNAT precedence is determined according to the following rules:

• First, if a SNAT is defined in a Network Access resource configuration, APM uses that SNAT.
• If there is no SNAT defined in the Network Access resource, or the resource is another type, the APM takes the SNAT from this assignment in the access policy.
• If there is no SNAT assigned in the access policy, the APM uses the SNAT from the virtual server definition.

The SSO Credential Mapping action caches the user name and password for use with single sign-on (SSO) applications in the enterprise. This action enables users to forward stored user names and passwords to applications and servers automatically, without having to input credentials repeatedly.

The SSO Credential Mapping action provides these configuration elements and options.

SSO Token Username

One of these:

• Username from Logon Page - when selected, the Tcl expression that APM^® uses to obtain the username from session variables displays; it is read-only.
• sAMAccountName from Active Directory - when selected, the Tcl expression that APM uses displays; it is read-only.
• sAMAccountName from LDAP Directory - when selected, the Tcl expression that APM uses displays; it is read-only.
• Custom - when selected, the last-displayed Tcl expression remains in the entry field. This field can be edited; another Tcl expression can be entered.

SSO Token Password

One of these:

• Password from Logon Page - when selected, the Tcl expression that APM uses to obtain the username from session variables displays; it is read-only.
• Custom - when selected, the last-displayed Tcl expression remains in the entry field. This field can be edited.

The Variable Assign action can includes one or more entries. An entry specifies a variable and assigns a value to it.

A variable assign entry screen as it displays initially

In the entry screen, the variable is specified in the left pane and the value is specified in the right pane.

A Variable Assign action provides these configuration elements and options for the variable:

Custom Variable

Specifies a variable name. It can be any name including the name of a session variable or the name of a perflow variable.

Note: For a per-session policy, when the policy runs it recognizes only existing perflow variables.

Predefined Variables

Specifies a predefined session variable or perflow variable name, which must be selected from the Variable list. The type of variable (session or perflow) that is available for selection depends on the selected Group: Per-Session Variables or Per-Request Variables.

For Per-Request Variables, the Scratchpad, Custom, and Primary Category perflow variables are available for use in the per-request policy and in per-request policy subroutines. You can, for example, pass the value of a session variable into the per-request policy in one of these variables.

Unsecure or Secure

Specifies whether the variable is secure. A secure variable is stored in encrypted form in the session database. The value of a secure variable is not displayed in the session report, or logged by the logging agent.

A Variable Assign action provides these configuration elements and options for the value:

Custom Expression

Specifies a Tcl expression. The result of the expression is used as the value.

AAA attribute

Specifies the name of the attribute that contains the value:

• Agent Type - specifies the type of AAA server: AD, LDAP, or RADIUS.
• Attribute Type - specifies the attribute type to use depending on the agent type:
  • Use user's attribute - for AD agent.
  • Use user's primary group attribute - for AD agent.
  • Use LDAP attribute - for LDAP agent.
  • Use RADIUS attribute - for RADIUS agent.
• Agent type attribute name - specifies the name of the attribute that contains the value.

Text

Specifies a text string to use as the value. The text entered in this field is used as is.

Session Variable

Specifies the name of a session variable from which to get the value.

A VMware View Policy action provides the ability to enable USB redirection for View desktop resources, and to pass Start Session Script Variables for VMware View connections for supported View clients.

A VMware View Policy action provides these configuration elements and options:

USB redirection

• Disabled - Disables USB redirection. This is the default setting.
• Enabled - Enables USB redirection.

VMware View Start Session Script Variables

Specify variables and values to pass to the VMware View Connection Server (VCS) for use in a Start Session Script that you have configured on the VCS.

The Webtop, Links and Sections Assign action can assign a webtop, preconfigured webtop links, and webtop sections to a session.

A Webtop, Links and Sections Assign action provides these configuration elements and options:

Webtop Links

Specifies one or more webtop links.

Note: Webtop links apply only to a full webtop.

Webtop

Specifies one webtop. This can be a full webtop, portal access webtop, or a network access webtop.

Webtop Sections

Specifies one or more webtop sections for grouping links on the webtop.

Note: Webtop sections apply only to a full webtop.

Endpoint security (client-side) access policy items require installation of client components. Access Policy Manager^® uses ActiveX controls or browser plug-ins to collect information about client systems.

Not all clients support browser add-ons or allow browser software installation. For these clients, the server-side security process can inspect HTTP headers to gather information about the client operating system and browser type. The server-side Client Capability action determines whether a client is capable of running client-side actions.

The Anti-spyware action checks for anti-spyware software on a client computer. When checking for multiple anti-spyware types, if one anti-spyware type matches the software on the client system, the action passes, regardless of other anti-spyware conditions that are specified in the item.

An Anti-spyware action provides these settings and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Platform

Specifies a platform. The default is Any. When a platform is selected, the Vendor ID and Product ID lists update to include the products and vendors that are supported for that platform according to the EPSEC package that is installed on the BIG-IP^® system.

Note: A link to a report that includes the anti-spyware software that Access Policy Manager^® currently supports is available on the BIG-IP system Welcome page.

Vendor ID

Specifies a vendor ID (from the list of supported vendors) or Any.

Product ID

Specifies a product ID (from the list of supported products) or Any.

State

Specifies one of these states:

• Enabled When selected, the action verifies that the anti-spyware software is enabled
• Disabled When selected, the action verifies that the anti-spyware software is disabled.
• Unspecified When selected, the action does not verify the state of the software.

Engine Version

Specifies the engine version number; when specified the Anti-spyware action verifies this information.

DB Version

Specifies the database version number; when specified the Anti-spyware action verifies this information.

DB Age Not Older Than (days)

Specifies the database age in days; when specified the Anti-spyware action verifies this information.

Last Scan Time Not Older Than (days)

Specifies a number of days; when specified the Anti-spyware action verifies that the last scan did not occur more than the specified number of days ago.

The Antivirus action checks for antivirus software on the client computer. When checking for multiple antivirus types, if one antivirus type matches the software on the client system, the action passes, regardless of other antivirus conditions that are specified in the action.

An Antivirus action provides these settings and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Platform

Specifies a platform. The default is Any. When a platform is selected, the Vendor ID and Product ID lists update to include the products and vendors that are supported for that platform according to the EPSEC package that is installed on the BIG-IP^® system.

Note: A link to a report that includes the antivirus software that Access Policy Manager^® currently supports is available on the BIG-IP system Welcome page.

Vendor ID

Specifies a vendor ID (from the list of supported vendors) or Any.

Product ID

Specifies a product ID (from the list of supported products) or Any.

State

Specifies one of these states:

• Enabled - when selected, the action verifies that the antivirus software is enabled
• Disabled - when selected, the action verifies that the antivirus software is disabled.
• Unspecified - when selected, the action does not verify the state of the software.

Version

Specifies a version; when specified, the antivirus action verifies the version of the software.

Engine Version

Specifies the engine version number; when specified, the antivirus action verifies this information.

DB Version

Specifies the database version number; when specified, the antivirus action verifies this information.

DB Age Not Older Than (days)

Specifies the database age in days; when specified, the antivirus action verifies this information.

Last Scan Time Not Older Than (days)

Specifies a number of days; when specified, the antivirus action verifies that the last scan did not occur more than the specified number of days ago.

The Firewall action checks for firewall software on the client computer. When this action includes checks for multiple firewall types, if one firewall type matches the software on the client computer, the action passes, regardless of other firewall conditions that are specified in the action.

A firewall action provides these settings and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Platform

Specifies a platform. The default is Any. When a platform is selected, the Vendor ID and Product ID lists update to include the products and vendors that are supported for that platform according to the EPSEC package that is installed on the BIG-IP^® system.

Note: A link to a report that includes the firewall software that Access Policy Manager^® currently supports is available on the BIG-IP system Welcome page.

Vendor ID

Specifies a vendor ID (from the list of supported vendors) or Any.

Product ID

Specifies a product ID (from the list of supported products) or Any.

State

Specifies one of these states:

• Enabled When selected, the action verifies that the firewall software is enabled
• Disabled When selected, the action verifies that the firewall software is disabled.
• Unspecified When selected, the action does not verify the state of the software.

Version

Specifies a version; when specified, the firewall action verifies the version of the software.

The Hard Disk Encryption action checks for hard disk encryption software on a client computer. When this action includes checks for multiple hard disk encryption types, if one of the specified hard disk encryption types matches the software on the client system, the action passes, regardless of other hard disk encryption conditions that are specified in the item.

A Hard Disk Encryption action provides these settings and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Platform

Specifies a platform. The default is Any. When a platform is selected, the Vendor ID and Product ID lists update to include the products and vendors that are supported for that platform according to the EPSEC package that is installed on the BIG-IP^® system.

Note: A link to a report that includes the hard disk encryption software that Access Policy Manager^® currently supports is available on the BIG-IP system Welcome page.

Vendor ID

Specifies a vendor ID (from the list of supported vendors) or Any.

Product ID

Specifies a product ID (from the list of supported products) or Any.

Encryption State

Specifies one of these states:

• Enabled When selected, the action verifies that all disk volumes are encrypted on the client.
• Disabled When selected, the action verifies all disk volumes are not encrypted on the client.
• Unspecified When selected, the action verifies that hard disk encryption software is installed on the client.

Version

Specifies a version; when specified, the Hard Disk Encryption action verifies the version of the software.

The Linux File action can verify the presence of specific files and can verify one or more file properties in situations where doing so increases confidence in the security of the client system. If a file with the described properties exists, the access policy passes the client to the successful branch. If the file does not exist, or a file exists but one or more properties are not correct, the access policy passes the client to the fallback branch.

The Linux File action provides the following configuration elements and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

FileName

Specifies the file name for which to check; for example csound.

MD5

Specifies the MD5 checksum. An MD5 checksum provides easily computable verification of the identity of a file using a cryptographic hash algorithm. The MD5 checksum is a 32-digit hexadecimal value. For example, the checksum for a zero-byte file is always d41d8cd98f00b204e9800998ecf8427e.

Size

Specifies the size of the file in bytes. The default value is 0 which is the same as not specifying a size; a size of zero (0) is not verified.

Note: A zero-byte file is specified with the MD5 checksum for a zero-byte file in the MD5 field.

Date

Specifies the file last modified date.

Note: The date must be translated first to GMT, and then to a 24-hour clock.

The Linux Process action can verify that one or more particular processes are or are not running on a client system.

The Linux Process action provides these configuration elements and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Expression

Specifies a Boolean expression to use to check for a process. The expression can include these wildcards: * and ?, and parentheses ( ) to combine values, and the logical operators AND, OR, and NOT. This is the syntax for a process check expression: "process name" | (EXPRESSION) | NOT EXPRESSION | EXPRESSION AND EXPRESSION | EXPRESSION OR EXPRESSION

Note: Double quotes (" ") are required around each process name.

Here is an example expression: "httpd" AND NOT "smtpd". Using this expression, the Linux Process action verifies that the HTTP daemon (httpd) is running on the system, and that the SMTP daemon (smtpd) is not running. Using another example expression, ("process1" OR "process2") AND "process3*", the action verifies the presence of either process1 or process2, and a process with a name that is process3 or starts with process3.

The Mac File action can verify the presence of specific files and can verify one or more file properties in situations where doing so increases confidence in the security of the client system. If a file with the described properties exists, the access policy passes the client to the successful branch. If the file does not exist, or a file exists but one or more properties are not correct, the access policy passes the client to the fallback branch.

The Mac File action provides the following configuration elements and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

FileName

Specifies the file name for which to check; for example check.txt.

MD5

Specifies the MD5 checksum. An MD5 checksum provides easily computable verification of the identity of a file using a cryptographic hash algorithm. The MD5 checksum is a 32-digit hexadecimal value. For example, the checksum for a zero-byte file is always d41d8cd98f00b204e9800998ecf8427e.

Size

Specifies the size of the file in bytes. The default value is 0 which is the same as not specifying a size; a size of zero (0) is not verified.

Note: A zero-byte file is specified with the MD5 checksum for a zero-byte file in the MD5 field.

Date

Specifies the file last modified date.

Note: The date must be translated first to GMT, and then to a 24-hour clock.

The Mac Process action can verify that one or more particular processes are or are not running on a client system.

The Mac Process action provides these configuration elements and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Expression

Specifies a Boolean expression to use to check for a process. The expression can include these wildcards: * and ?, and parentheses ( ) to combine values, and the logical operators AND, OR, and NOT. This is the syntax for a process check expression: "process name" | (EXPRESSION) | NOT EXPRESSION | EXPRESSION AND EXPRESSION | EXPRESSION OR EXPRESSION

Note: Double quotes (" ") are required around each process name.

Here is an example expression: "httpd" AND NOT "smtpd". Using this expression, the Mac Process action verifies that the HTTP daemon (httpd) is running on the system, and that the SMTP daemon (smtpd) is not running. Using another example expression, ("process1" OR "process2") AND "process3*", the action verifies the presence of either process1 or process2, and a process with a name that is process3 or starts with process3.

A Machine Certificate Auth action can check for the existence of fields in a machine certificate to ensure that Windows and Mac client systems comply with your security policy.

The Machine Certificate Auth action provides the following configuration elements and options:

Certificate Store Name

Specifies the certificate store name that the action attempts to match. The certificate store can be a system store with a predefined name, such as MY, or a user-defined name. The store name can contain alphanumeric characters. The Machine Cert Auth action treats MY as the default store name for both Mac and Windows clients.

Certificate Store Location

Specifies the type and location of the store that contains the certificate, either the local machine or the current user. For a Windows client, the store locations are in the following registry locations:

• LocalMachine When specified, the action searches in HKEY_LOCAL_MACHINE for the machine certificate.
• CurrentUser When specified, the action searches in HKEY_CURRENT_USER for the machine certificate.

For a Mac client, the store locations are keychains in the following domains:

• LocalMachine When specified, the action searches in the keychain specified in Certificate Store Name in the system preference domain.
• CurrentUser When specified, the action searches in the keychain specified in Certificate Store Name in the user preference domain.

For a Mac client, the following examples apply.

• If Certificate Store Name is set to System.keychain and Certificate Store Location is set to LocalMachine, the action searches for the machine certificate in /Library/Keychains/System.keychain.
• If Certificate Store Name is set to login.keychain and Certificate Store Location is set to CurrentUser, the action searches for the machine certificate in /Library/Keychains/login.keychain and then searches for the machine certificate in /Users/username/Library/Keychains/login.keychain
• If Certificate Store Name is set to MY then the action searches for the machine certificate in the default keychain of Certificate Store Location.

CA Profile

Specifies the certificate authority profile for the particular machine certificate.

Save Certificate in a session variable

Specifies Enabled or Disabled. When Enabled, specifies that the complete encrypted text of the machine certificate be saved in a session variable, session.check_machinecert.<name>.cert.cert.

Allow User Account Control right elevation prompts

Specifies Yes or No. When set to Yes, a UAC prompt for users with admin-level privileges is allowed. When set to No the UAC prompt for non-admin users is suppressed, which can cause a failure to verify the machine certificate. This setting does not affect users without admin-level privileges. If the Machine Certificate Checker Service is installed and Allow User Account Control right elevation prompts is set to Yes, the following scenarios occur:

• Users with administrator privilege are prompted for UAC.
• Standard users who use Machine Certificate Checker service will not be prompted for UAC.
• Guest users who use Machine Certificate Checker service will not be prompted for UAC.

If the Machine Certificate Checker Service is installed and Allow User Account Control right elevation prompts is set to No, the following scenarios occur:

• Users with administrator privilege are not prompted for UAC.
• Standard users who use Machine Certificate Checker service will not be prompted for UAC.
• Guest users who use Machine Certificate Checker service will not be prompted for UAC.

If you do not install Machine Certificate Checker Service and set Allow User Account Control right elevation prompts to Yes, the following scenarios occur:

• Users with administrator privilege are prompted for UAC.
• Standard users will fail to verify machine certificate.
• Guest users will fail to verify machine certificate.

If you do not install Machine Certificate Checker Service and set Allow User Account Control right elevation prompts to No, the following scenarios occur:

• Users with administrator privilege will fail to verify machine certificate.
• Standard users will fail to verify machine certificate.
• Guest users will fail to verify machine certificate.

Match Subject CN with FQDN

Specifies Yes or No. When set to Yes, specifies that the common name in the machine certificate matches the computer's fully qualified domain name (FQDN) such as, CHR-L-SMITH2.MARKETING.SITEREQUEST.COM.

Match subject Alt Name with FQDN

Specifies a regular expression used to extract content from the first subgroup matched in the Subject Alternative Name, and then to compare the extracted content with the machine's FQDN.

Note: The order of RDNs is the same as is displayed; the required separator is a comma , .

Here are some examples of regex extraction.

• Partial extraction. For example, .*DNS Name=([^,]+).*" or .*Other Name:Principal Name=([^,]+).*. For a regular expression .*DNS Name=([^,]+).*, the value of the DNS Name field is extracted for matching.
• Whole extraction. Using (.*) specifies that the entire SubjectAltName content be extracted for matching.

Match Issuer

Specifies a regular expression that is used to match the Issuer content against the specified pattern.

Note: The order of RDNs is the same as is displayed; the required separator is a comma , .

Here are some examples of regex extraction.

• Partial match. CN=.*, OU=FP, O=F5, L=San Jose, S=CA, C=US
• Exact match. E=test@f5.com, CN=f5clientrootcert, OU=es, O=f5, L=london, S=chertsey, C=uk

Match Serial Number

Specifies a serial number that must be an exact match for the certificate serial. The hex string must be specified in the same order as it is displayed by OpenSSL and Windows certificate tools. For example, 33:AA:7B:82:00:01:00:00:00:33.

The Machine Info action retrieves MAC addresses for network adapters on Mac, Linux, and Windows clients. It retrieves additional information on Windows clients

After retrieving the information, the Machine Info action creates session variables and stores the values in them. Session variables can be used in Tcl expressions and are also available for configuring an expression using the expression builder pull-down menu item Machine Info.

The Machine Info action collects the following information and creates the following session variables.

The Patch Management action can check for patch management software on the client system. When this action includes checks for multiple patch management types, if one specified type matches, the action passes, regardless of other conditions that are specified in the action.

The Patch Management action provides the following configuration elements and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Platform

Specifies a platform. The default is Any. When a platform is selected, the Vendor ID and Product ID lists update to include the products and vendors that are supported for that platform according to the EPSEC package that is installed on the BIG-IP^® system.

Note: A link to a report that includes the antivirus software that Access Policy Manager^® currently supports is available on the BIG-IP system Welcome page.

Vendor ID

Specifies a vendor ID (from the list of supported vendors) or Any.

Product ID

Specifies a product ID (from the list of supported products) or Any.

Automatic Updates

Specifies one of these values:

• Enabled When selected, the action verifies that patch management software is running on the client system.
• Disabled When selected, the action verifies that patch management software is not running on the client system.
• Unspecified When selected, the action does not perform either verification.

Version

Specifies a version; when specified, the Patch Management action verifies the version of the software.

Max Allowed No. of Missing Critical Updates

Specifies a number; when specified, the action verifies that the number of missing critical updates for the software is less than this number.

The Peer-to-Peer action checks for peer-to-peer software on the client system.

The Peer-to-Peer action provides these configuration elements and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Check for software in the list, and

Specifies one of these options:

• pass if at least one listed software matches When selected, the action sends traffic to the successful branch if at least one software item in the list matches the software that is present on the client system.
• fail if unlisted software found -When selected, the action sends traffic to the fallback branch when any software that is not included in the list is found on the system. In this case, the list functions as a whitelist; if any endpoint software is found on the client system that is not included in the list, the check fails and traffic goes to the fallback branch.
• fail if any listed software matchesWhen selected, the action sends traffic to the fallback branch when any software item in the list is found on the client system. In this case, the list functions as a blacklist.

Platform

Specifies a platform. The default is Any. When a platform is selected, the Vendor ID and Product ID lists update to include the products and vendors that are supported for that platform according to the EPSEC package that is installed on the BIG-IP^® system.

Note: A link to a report that includes the peer-to-peer software that Access Policy Manager^® currently supports is available on the BIG-IP system Welcome page.

Vendor ID

Specifies a vendor ID (from the list of supported vendors) or Any.

Product ID

Specifies a product ID (from the list of supported products) or Any.

State

Specifies one of these values:

• Enabled When selected, the action verifies that peer-to-peer software is running on the client system.
• Disabled When selected, the action verifies that peer-to-peer software is not running on the client system.
• Unspecified When selected, the action does not verify the state.

Version

Specifies a version; when specified, the Peer-to-Peer action verifies the version of the software.

The Windows Cache and Session Control action can clean up after and control a session in a number of ways.

The Windows Cache and Session Control action provides these configuration elements and options:

Clean temporary Internet files and cookies

Specifies Disabled or Enabled. When set to Enabled, the action deletes temporary files and cookies after logout.

Clean forms and passwords autocomplete data

Specifies Disabled or Enabled. When set to Enabled, the action clears autocomplete entries in forms and fields after logout.

Empty Recycle Bin

Specifies Disabled or Enabled. When set to Enabled, the action empties the system Recycle Bin after logout.

Force session termination if the browser or Webtop is closed

Specifies Disabled or Enabled. When set to Enabled, the action forces the session to terminate after the browser or Webtop is closed.

Remove dial-up entries used by Network Access client

Specifies Disabled or Enabled. When set to Enabled, the action removes dial-up networking entries after logout.

Terminate session on User Inactivity

Specifies Disabled or n minutes, or n hours or Custom and a number of minutes. When not set to Disabled, the action terminates the session after the specified amount of time elapses.

Lock workstation on User Inactivity

Specifies Disabled or n minutes, or n hours or Custom and a number of minutes. When not set to Disabled, the action locks the workstation after the specified amount of time elapses.

A Windows File action can verify the presence of specific files and can verify one or more file properties in situations where doing so increases confidence in the security of the client system. If a file with the described properties exists, the access policy passes the client to the successful branch. If the file does not exist, or a file exists but one or more properties are not correct, the access policy passes the client to the fallback branch.

The Windows File action provides the following configuration elements and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

FileName

Specifies the file name for which to check; for example, notepad.exe can be used to check for Windows Notepad.

MD5

Specifies the MD5 checksum. An MD5 checksum provides easily computable verification of the identity of a file using a cryptographic hash algorithm. The MD5 checksum is a 32-digit hexadecimal value. For example, the checksum for a zero-byte file is always d41d8cd98f00b204e9800998ecf8427e.

Size

Specifies the size of the file in bytes. The default value is 0 which is the same as not specifying a size; a size of zero (0) is not verified.

Note: A zero-byte file is specified with the MD5 checksum for a zero-byte file in the MD5 field.

Signer

Specifies the signer for the file. This can be left blank to omit checking for a signer.

Date

Specifies the file last modified date.

Note: The date must be translated first to GMT, and then to a 24-hour clock.

Version

Specifies the version of the file. This can be left blank to omit checking for a version.

Version Comparison

Specifies the version comparison operator:

• = Specifies that the version to check for is the exact version specified in the Version field.
• < Specifies that the version to check for is a higher number than the version number specified in the Version field.
• > Specifies that the version to check for is a lower number than the version number specified in the Version field.

The Windows Health Agent action checks for health agent software on Windows-based client systems. When this action includes checks for multiple health agent types, if one specified type matches the software on the client system, the action passes, regardless of other health agent conditions that are specified in the action.

A Windows Health Agent action provides these settings and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Vendor ID

Specifies a vendor ID (from the list of supported vendors) or Any.

Product ID

Specifies a product ID (from the list of supported products) or Any.

Version

Specifies a version; when specified, the Windows Health Agent action verifies the version of the software.

Policy Compliance

Specifies one of these values:

• Enabled - when selected, the action verifies that the client is compliant with the health policy specified by the site administrator.
• Disabled - when selected, the agent verifies that the client is out of compliance with the health policy specified by the site administrator.
• Unspecified - when selected, that action does not check for policy compliance.

The Windows Info action determines whether the client uses particular versions of the Windows operating system and has applied specific patches or updates to Windows. The Windows Info action supplies several default branch rules for various Windows operating system versions or Windows operating system version and service pack combinations.

The Windows Info action supplies these conditions for defining branch rules.

Windows platform is

Specifies a platform; supported platforms are available for selection on a list.

Windows patch n is installed

Specifies a patch version or service pack number, such as SP1.

The Windows Process action can verify that one or more particular processes are or are not running on a client system.

The Windows Process action provides these configuration elements and options:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Expression

Specifies a Boolean expression to use to check for a process. The expression can include these wildcards: * and ?, and parentheses ( ) to combine values, and the logical operators AND, OR, and NOT. This is the syntax for a process check expression: "process name" | (EXPRESSION) | NOT EXPRESSION | EXPRESSION AND EXPRESSION | EXPRESSION OR EXPRESSION

Note: Double quotes (" ") are required around each process name.

Here is an example expression: ("winlogon.exe" AND "GoogleDesktop.exe") AND NOT "gator*". The expression checks running Windows processes for the presence of the winlogon.exe and GoogleDesktop.exe processes and the absence of any process with gator in the name.

The Windows Protected Workspace action configures a temporary Windows user workspace for a session. This workspace contains temporary Desktop and My Documents folders. The protected workspace control deletes the temporary workspace and all of the folder contents at the end of the session.

Close Google Desktop Search

Specifies whether to close Google Desktop Search before starting protected workspace.

Allow user to temporarily switch from Protected Workspace

Specifies whether a user can switch from the protected workspace. When set to Enabled, the action provides a link so that the user can temporarily switch from the protected workspace.

Allow user to use printers

Specifies whether a user can use printers.

Allow write access to USB flash drives

Specifies whether a user can write from the protected workspace to USB flash drives:

• Disabled does not allow users to write to any USB flash drives from the protected workspace.
• All USB flash drives allows a user to write to any USB flash drive from the protected workspace.
• Only IronKey Secure Flash Drives allows a user to write only to specialized, highly secured flash drives created by IronKey, Inc., from the protected workspace.

Allow user to burn CDs

Specifies whether a user can burn CDs from within the protected workspace.

Allow user to choose storage location

Specifies whether a user can choose the storage location for protected workspace files:

• Enabled allows users to select a storage location.
• Disabled stores files in the user's Document and Settings directory.

Enable persistent storage

Specifies whether data is saved on the system after the Protected Workspace session is closed:

• Enabled allows users to save encrypted data from the Protected Workspace session on the local system after the session exits. The files are automatically decrypted and available in the next Protected Workspace session.
• Disabled prevents users from storing Protected Workspace data in persistent storage.

Password protect new storage

Specifies whether the protected workspace requires a password to access data in persistent storage.

• Enabled requires the user to set a password to access persistent storage data.
• Disabled uses the default encryption and decryption, which is based on the server group name and storage device volume serial number.

Server group name

Specifies a group name for the server. This name is arbitrary, but limits persistent storage to that group name. For example, if a user connects to a protected workspace on a server with group name GroupA, and persistent storage is enabled, the user data is available when reconnecting to a server with the group nameGroupA. However, if the user then connects to a server with persistent storage enabled, and the server group name GroupB, persistent data from the GroupAProtected Workspace session is not available in the new session, and a new persistent storage is defined

The Windows Registry action verifies the existence or absence of certain keys and values in the Windows system registry database based on user-entered key values or Boolean expressions. Windows Registry can also fetch the value of a key and store it in a session variable, provided that the client is configured to allow the value to be fetched.

The Windows Registry action provides these configuration elements:

Continuously check the result and end the session if it changes

Specifies Enabled or Disabled.

Note: When Enabled, if the client does not respond for five minutes, the server ends the session.

Expression

Specifies a Boolean expression.

This is the syntax for registry checker expressions:

"key" comparison_operator data

"key"."value" >> "variable_name"

"key" ISPR

"key"."value" comparison_operator data

"key"."value" ISPR

“key”

Represents a path in the Windows registry. Quotation marks are required around the path. If quotation marks exist as part of the registry path, they should be doubled (requires two sets of quotation marks).

“value”

Represents the name of the value. Quotation marks are required. If quotation marks exist as part of the value name, they should be doubled (requires two sets of quotation marks).

comparison_operator

Represents a comparison operator (< <= > >= =) or ISPR. ISPR verifies that a key or value is present. The equal sign (=) and the double equal sign (==) specify equality.

Note: Windows Registry does not support comparison of binary data.

data

Represents the content to compare against. Any spaces, commas, slashes, tabs, or other delimiters in the data must be enclosed in quotation marks. Data is interpreted as a version number when formatted like this: d.d[.d][.d]”, d,d[,d][,d] (where d is a number). Data is interpreted as a date when formatted like this: mm/dd/yyyy .

>>

This is the GET operator; it fetches the value of a key provided that the client is configured to allow the value to be fetched.

Note: The GET operator supports these Windows Registry data types only: REG_DWORD, REG_SZ, and REG_MULTI_SZ. The maximum recommended amount of data that a GET operator returns should be kept within 1 KB.

All sub-expressions of a compound expression are evaluated even if they are joined by OR operators. Windows Registry values are sent to the server for successful fetch operations even if the overall expression is evaluated to false.

"variable_name"

Represents the variable into which the GET operator stores the value of the key. When a GET operation is successful, the registry value retrieved from the client is saved in a session variable in this format: session.windows_check_registry.last.data. variable_name. Quotation marks are required. The variable name can include alphanumeric symbols, underscores, dots, and hyphens only and must be no more than 64 characters long.

On 64-bit Windows systems, the Windows Registry action can check for registry keys in the 64-bit registry or the 32-bit registry. The following registry root key names are supported:

• HKEY_CURRENT_USER
• HKEY_CURRENT_USER32
• HKEY_CURRENT_USER64
• HKEY_LOCAL_MACHINE
• HKEY_LOCAL_MACHINE32
• HKEY_LOCAL_MACHINE64
• HKEY_CLASSES_ROOT
• HKEY_CLASSES_ROOT32
• HKEY_CLASSES_ROOT64
• HKEY_USERS
• HKEY_USERS32
• HKEY_USERS64

An HKEY value specified with a 32 can provide a 32-bit view of a 64-bit registry. This is the perspective used by 32-bit applications running on a 64-bit operating system. An HKEY value specified with a 64 can provide a 64-bit view of the registry. This is the perspective used by native 64-bit applications.

Keys without a bit value specified use the default Windows registry redirectors, as specified by Microsoft. On a 32-bit Windows system, the number of bits specified in a registry key name is ignored.

The Client for MS Exchange action determines whether a client is using Microsoft Exchange or ActiveSync protocols. This action includes two default branches: Client for MS Exchange and fallback. The Client for MS Exchange branch indicates that the client uses the Microsoft Exchange or ActiveSync protocol. A client for Microsoft Exchange is not a typical web browser and Access Policy Manager^® (APM^®) has the following restrictions on Client for MS Exchange access policy branches.

Behavioral restrictions

• APM does not attempt to perform authentication retries.
• A logon page action automatically works in clientless mode. (The access policy must include a logon page action.)
• Except for the logon page, APM cannot provide responses that require additional user input.

Limited supported actions

Microsoft Exchange devices support only the following actions. Therefore, only these actions are supported on a Client for MS Exchange access policy branch.

• Authentication actions:
  • AD Auth
  • AD Query
  • Client Cert Inspection
  • HTTP Auth
  • LDAP Auth
  • LDAP Query
  • NTLM Auth
  • RADIUS Auth
  • RADIUS Accounting
  • RSA SecurID Authentication
• Endpoint security (server-side) actions:
  • Client-Side Capability
  • Client OS
  • Landing URI
  • IP Geolocation Match

The Client OS action detects the operating system of the remote client. Access Policy Manager^® detects this using information from the HTTP header. The action provides separate branches for separate operating systems. This action can be very useful at the beginning of an access policy. Each branch can include actions that are specific to a client operating system.

This figure shows the Client OS action and default branches, configured to allow access to clients on the Windows RT operating system and to deny access to all others.

Client OS item with Allow ending configured on Windows RT branch

The Client Type action determines whether the client is using a full browser, the BIG-IP^® Edge Client, or another client to access the Access Policy Manager^® (APM^®). This action makes it possible to specify different actions for different client types in one access policy and, as a result, to use one virtual server for traffic from different client types. This figure shows the Client Type action as it looks when first added to an access policy.

Client Type

By default, the Client Type action includes these branches:

Edge Portal

Indicates that the user is connecting with the BIG-IP^® Edge Portal^® mobile app.

Edge Client

Indicates that the user is connecting with the BIG-IP^® Edge Client^® or BIG-IP Edge Client app, supported on multiple devices and operating systems.

Citrix Receiver

Indicates that the user is connecting using a later Citrix Receiver client.

Citrix Receiver (legacy)

Indicates that the user is connecting using an earlier Citrix Receiver client (identified with PN Agent).

VMware View

Indicates that the user is connecting using a VMware Horizon View client.

Full or Mobile Browser

Indicates the user is connecting with a Windows web browser or a mobile browser.

Windows Inbox F5 VPN Client

Indicates the user is connecting using the Windows Inbox F5 VPN client.

fallback

Indicates the user is connecting with another method.

APM supports the client types on multiple operating systems. Refer to AskF5™ (support.f5.com) to look up the supported operating systems and versions in the compatibility matrix for your version of APM.