Applies To:Show Versions
Configuring the BIG-IP System for DHCP Renewal
Overview: Renewing IP addresses for DHCP clients
You can configure the BIG-IP® system to manage DHCP renewal requests and responses.
Before configuring the BIG-IP system to manage DHCP renewal requests and responses, it is helpful to understand some BIG-IP system terminology:
|BIG-IP object type||Definition|
|BIG-IP pool member||A DHCP relay target (such as a DHCP server or BOOTP server). This is the dynamic address server to which the BIG-IP system forwards unicast requests.|
|BIG-IP virtual server||A BIG-IP system address on the listening VLAN|
|BIG-IP VLAN assigned to a virtual server||A listening VLAN, controlled on a per-virtual server basis|
About DHCP renewal
You can configure the BIG-IP system to act as a DHCP renewal system. A common reason to configure the BIG-IP system as a renewal system is when the DHCP servers reside on a different subnet than that of the client systems, and the BIG-IP system is also configured as a DHCP relay agent. As a DHCP renewal system, the BIG-IP system manages the renewal of client IP addresses by DHCP servers before the addresses expire.
During the renewal process, a DHCP client sends a renewal request, which is passed through a BIG-IP Forwarding IP type of virtual server directly to the specific DHCP server that issued the initial client IP address. The DHCP server then sends a response to renew the lease for the client's IP address.
In the example shown in the illustration, a DHCP client sends a renewal message to the same BIG-IP system that initially acted as the DHCP relay agent. This renewal request is forwarded through a BIG-IP renewal virtual server directly to DHCP server 1. DHCP server 1 then provides a response to renew the lease for the client's IP address.
A sample DHCP renewal system configuration
Creating a DHCP renewal virtual server
On the Main tab, click
.The Virtual Server List screen opens.
Click the Create button.
The New Virtual Server screen opens.
- In the Name field, type a unique name for the virtual server.
- Optional: Type a description for the virtual server.
- From the Type list, select Forwarding (IP).
For a host, in the Destination Address field, type an
IPv4 or IPv6 address in CIDR format to allow all traffic to be translated.
The supported format is address/prefix, where the prefix length is in bits. For example, an IPv4 address/prefix is 0.0.0.0/0, and an IPv6 address/prefix is ::/0.
- In the Service Port field, type 67 (IPv4) or 547 (IPv6).
- From the Protocol list, select UDP.
- From the VLAN and Tunnel Traffic list, select the VLANs on the same network as the DHCP clients.
- Click Finished.
The BIG-IP® system is configured to forward DHCP client renewal requests to appropriate DHCP servers that reside on a different subnet than the client systems. The BIG-IP also forwards the DHCP server responses back to the client systems, therefore ensuring that client IP addresses do not expire.