Applies To:Show Versions
BIG-IP Link Controller
BIG-IP Virtual Edition (VE) is a version of the BIG-IP system that runs as a virtual machine. Supported modules include Local Traffic Manager, Global Traffic Manager, Application Security Manager, Access Policy Manager, Application Acceleration Manager, Policy Enforcement Manager, Application Firewall Manager, Analytics, and Protocol Security Manager. BIG-IP VE includes all features of device-based BIG-IP modules running on standard BIG-IP TMOS, except as noted in release notes and product documentation.
- Supported platforms
- User documentation for this release
- New in 11.5.0
- Fixes in 11.5.0
- Behavior changes in 11.5.0
- Local Traffic Manager-Virtual Edition known issues
- Global Traffic Manager-Virtual Edition known issues
- Application Security Manager-Virtual Edition known issues
- Access Policy Manager-Virtual Edition known issues
- Application Acceleration Manager-Virtual Edition known issues
- Policy Enforcement Manager-Virtual Edition known issues
- Application Firewall Manager-Virtual Edition known issues
- Analytics-Virtual Edition known issues
- Contacting F5 Networks
- Legal notices
This version of the software is supported in the following configurations. For a list of VE hypervisor support, see the Virtual Edition and Supported Hypervisors Matrix
Memory: 12 GB or more
All licensable module-combinations may be run on BIG-IP Virtual Edition (VE) guests provisioned with 12 GB or more of memory.
Memory: 8 GB
The following guidelines apply to VE guests configured with 8 GB of memory.
- No more than three modules should be provisioned together.
- Note that Global Traffic Manager (GTM) and Link Controller (LC) do not count toward the module-combination limit.
Memory: Less than 8 GB and more than 4 GB
The following guidelines apply to VE guests provisioned with less than 8 GB and more than 4 GB of memory.
- No more than three modules (not including AAM) should be provisioned together.
- Application Acceleration Manager (AAM) cannot be provisioned with any other module; AAM can only be provisioned standalone.
- Note that GTM and LC do not count toward the module-combination limit.
Memory: 4 GB or less
The following guidelines apply to VE guests provisioned with 4 GB or less of memory.
- No more than two modules may be configured together.
- AAM should not be provisioned, except as Dedicated.
User documentation for this release
For a list of Virtual Edition (VE) hypervisor support, see the Virtual Edition and Supported Hypervisors Matrix.
- BIG-IP LTM / VE 11.5.0 Documentation
- BIG-IP GTM / VE 11.5.0 Documentation
- BIG-IP ASM / VE 11.5.0 Documentation
- BIG-IP APM / VE 11.5.0 Documentation
- BIG-IP AAM / VE 11.5.0 Documentation
- BIG-IP PEM / VE 11.5.0 Documentation
- BIG-IP AFM / VE 11.5.0 Documentation
- BIG-IP Analytics / VE 11.5.0 Documentation
New in 11.5.0
Reduced Disk Size Options
With this release, there are 3 new disk size options available.
|Disk Size||Modules Supported||Features Supported|
|7 GB||LTM only on a single slot||You cannot install upgrades or hotfixes to this version.|
|31 GB||LTM only on two slots||This option can be extended and upgraded with new versions and hot fix updates. It does not allow installing any modules besides LTM, GTM, or LTM + GTM.|
|100 GB||Supports all modules||This option can be extended and upgraded with new versions and hot fix updates. It allows installing any combination of other modules supported by the current version of BIG-IQ VE software.|
Extensible disk size
After you deploy the BIG-IP VE, if the hypervisor supports it, you can now expand the disk size to provide additional space for VE log, trace, config, and core files. Instruction for this task varies depends on your hypervisor type and is documented in the BIG-IP VE Setup Guide for your hypervisor.
High-Performance 10Gbps VE configuration for virtual appliance
This release provides high-performance 10Gbps VE configuration for virtual appliance deployments using VMware.
Increased Max SSL throughput
This release provides increased Max SSL throughput to 4Gbps for 10 GB BIG-IP LTM VE deployments.
25Mbps throughput license
25Mbps throughput license for high-density deployments with individual applications, a small number of applications, or a single tenant on all major hypervisors and AWS.
Updated hypervisors and Linux distributions
This release provides support for updated hypervisors and Linux distributions. For a list of VE hypervisor support, see the Virtual Edition and Supported Hypervisors Matrix.
Fixes in 11.5.0
|ID 367759||On BIG-IP VE, modifying an interface's VLAN configuration from tagged to untagged, or untagged to tagged, can result in unavailability of traffic on that interface. Restarting the tmm with "bigstart restart tmm" will correct this condition, as will deleting and recreating the VLAN with desired tagging attributes.|
|ID 427415||AWS instances with core counts (vCPUs) higher than 4 is able to license and operate in the expected way.|
|ID 428612||"In order to make Intel SR-IOV work out-of-box, Intel VF's MTU has been reduced to 1500 in BIG-IP VE. VF's MTU has to be changed to be equal to or greater than its VLAN's MTU to support jumbo frame. A new feature is provided to make it happen. Steps to increase Intel VF's MTU in BIG-IP VE: - Append the following line to /etc/modprobe.d/f5-platform-virtual-applicance.conf file options unic max_mtu=<max_mtu_size> - reboot BIG-IP VE - OR, run: bigstart stop tmm rmmod unic modprobe unic bigstart start tmm"|
|ID 430655||Improved debugging on TMM to include DB variable provision.|
Local Traffic Manager-Virtual Edition known issues
|371631||BIG-IP Virtual Edition (VE) may incorrectly report the interface media duplex settings as none. The General Properties may show an incorrect Active Duplex setting when you navigate to Network :: Interfaces, and then click the interface. The output from the tmsh show network interface all-properties command may show incorrect information in the Media column. Running the command 'show net interface all-properties'. You are unable to confirm the current duplex setting of an interface. Workaround: To work around this issue, you can determine the interface media duplex setting for VE configurations not involving SR-IOV by running the following command: tmsh list net interface. Note: This workaround is valid only for VE configurations and only reports the VE's reported link state. A VM cannot determine any vSwitch's upstream link state via its own link state. VE knows about the link between it and the vSwitch, except in SR-IOV deployments, where there is no vSwitch and the link is direct.|
|413587||The customer will see an extra interface when a Big-IP Virtual Edition is deployed on Citrix XenServer 6.1. This extra interface will have the same MAC address as the VE instance's management interface. The shell command 'ip list' will show one more interface that the user has configured through the hypervisor, and two of those interfaces shown will have the same MAC address." Virtual Edition deployed on Citrix XenServer 6.1 The management interface may be exposed to the TMM as a traffic interface. A customer should use SR-IOV interfaces for VE instances deployed on Citrix XenServer 6.1.|
Global Traffic Manager-Virtual Edition known issues
There are no known issues specific to Global Traffic Manager-Virtual Edition.
Application Security Manager-Virtual Edition known issues
There are no known issues specific to Application Security Manager-Virtual Edition.
Access Policy Manager-Virtual Edition known issues
|ID 459652||The default VE disk space of 100 GB is not enough to support more than one installed image when both APM and SWG are installed and provisioned. This issue is specific to VE versions 11.5.0 and 11.5.1. An attempt to install a new release or a hotfix on the second default volume fails with a disk-full error message. Workaround: Stop VE and increase the size of the VE disk to at least 124 GB. Then restart VE. For information on how to increase VE disk size, see SOL14952: Extending disk space on BIG-IP Virtual Edition, available here: http://support.f5.com/kb/en-us/solutions/public/14000/900/sol14952.html.|
Application Acceleration Manager-Virtual Edition known issues
There are no known issues specific to Application Acceleration Manager-Virtual Edition.
Policy Enforcement Manager-Virtual Edition known issues
There are no known issues specific to Policy Enforcement Manager-Virtual Edition.
Application Firewall Manager-Virtual Edition known issues
There are no known issues specific to Application Firewall Manager-Virtual Edition.
Analytics-Virtual Edition known issues
There are no known issues specific to Analytics-Virtual Edition.
Contacting F5 Networks
For additional information, please visit http://www.f5.com.
You can find additional support resources and technical documentation through a variety of sources.
F5 Networks Technical Support
Free self-service tools give you 24x7 access to a wealth of knowledge and technical support. Whether it is providing quick answers to questions, training your staff, or handling entire implementations from design to deployment, F5 services teams are ready to ensure that you get the most from your F5 technology.
AskF5 is your storehouse for thousands of solutions to help you manage your F5 products more effectively. Whether you want to search the knowledge base periodically to research a solution, or you need the most recent news about your F5 products, AskF5 is your source.
The F5 DevCentral community helps you get more from F5 products and technologies. You can connect with user groups, learn about the latest F5 tools, and discuss F5 products and technology.
- Weekly HTML TechNews
- The weekly TechNews HTML email includes timely information about known issues, product releases, hotfix releases, updated and new solutions, and new feature notices. To subscribe, click TechNews Subscription, complete the required fields, and click the Subscribe button. You will receive a confirmation. Unsubscribe at any time by clicking the Unsubscribe link at the bottom of the TechNews email.
- Periodic plain text TechNews
- F5 Networks sends a timely TechNews email any time a product or hotfix is released. (This information is always included in the next weekly HTML TechNews email.) To subscribe, send a blank email to firstname.lastname@example.org from the email address you are using to subscribe. Unsubscribe by sending a blank email to email@example.com.