Supplemental Document : BIG-IP 16.0.1.1 Fixes and Known Issues

Applies To:

Show Versions Show Versions

BIG-IP APM

  • 16.0.1

BIG-IP Link Controller

  • 16.0.1

BIG-IP Analytics

  • 16.0.1

BIG-IP LTM

  • 16.0.1

BIG-IP PEM

  • 16.0.1

BIG-IP AFM

  • 16.0.1

BIG-IP DNS

  • 16.0.1

BIG-IP FPS

  • 16.0.1

BIG-IP ASM

  • 16.0.1
Original Publication Date: 02/10/2021
Updated Date: 03/13/2021

BIG-IP Release Information

Version: 16.0.1.1
Build: 6.0

Note: This content is current as of the software release date
Updates to bug information occur periodically. For the most up-to-date bug data, see Bug Tracker.

Cumulative fixes from BIG-IP v16.0.1 that are included in this release
Cumulative fixes from BIG-IP v16.0.0.1 that are included in this release
Known Issues in BIG-IP v16.0.x

Vulnerability Fixes

ID Number CVE Solution Article(s) Description
882189-1 CVE-2020-5897 K20346072 BIG-IP Edge Client for Windows vulnerability CVE-2020-5897
882185-1 CVE-2020-5897 K20346072 BIG-IP Edge Client Windows ActiveX
881317-7 CVE-2020-5896 K15478554 BIG-IP Edge Client for Windows vulnerability CVE-2020-5896
881293-1 CVE-2020-5896 K15478554 BIG-IP Edge Client for Windows vulnerability CVE-2020-5896
924961-1 CVE-2019-20892 K45212738 CVE-2019-20892: SNMP Vulnerability
881445-8 CVE-2020-5898 K69154630 BIG-IP Edge Client for Windows vulnerability CVE-2020-5898
842717-8 CVE-2020-5855 K55102004 BIG-IP Edge Client for Windows vulnerability CVE-2020-5855
773693-9 CVE-2020-5892 K15838353 CVE-2020-5892: APM Client Vulnerability
954381-1 CVE-2021-22986 K03009991 iControl REST unauthenticated remote command execution vulnerability CVE-2021-22986
951705-1 CVE-2021-22986 K03009991 iControl REST unauthenticated remote command execution vulnerability CVE-2021-22986
955145-1 CVE-2021-22986 K03009991 iControl REST unauthenticated remote command execution vulnerability CVE-2021-22986
950077-1 CVE-2021-22987, CVE-2021-22988 K18132488 TMUI authenticated remote command execution vulnerabilities CVE-2021-22987 and CVE-2021-22988
953677-1 CVE-2021-22987, CVE-2021-22988 K18132488 TMUI authenticated remote command execution vulnerabilities CVE-2021-22987 and CVE-2021-22988
953729-1 CVE-2021-22989, CVE-2021-22990 K56142644 Advanced WAF/ASM TMUI authenticated remote command execution vulnerabilities CVE-2021-22989 and CVE-2021-22990
973333-6 CVE-2021-22991 K56715231 TMM buffer-overflow vulnerability CVE-2021-22991
981169-1 CVE-2021-22994 K66851119 F5 TMUI XSS vulnerability CVE-2021-22994
743105-1 CVE-2021-22998 K31934524 BIG-IP SNAT vulnerability CVE-2021-22998
937637-2 CVE-2021-23002 K71891773 BIG-IP APM VPN vulnerability CVE-2021-23002
976925-1 CVE-2021-23002 K71891773 BIG-IP APM VPN vulnerability CVE-2021-23002


Functional Change Fixes

ID Number Severity Solution Article(s) Description
930005-1 3-Major   Recover previous QUIC cwnd value on spurious loss
920961-1 3-Major   Devices incorrectly report 'In Sync' after an incremental sync
756139-5 3-Major   Inconsistent logging of hostname files when hostname contains periods
921421-4 4-Minor   iRule support to get/set UDP's Maximum Buffer Packets


TMOS Fixes

ID Number Severity Solution Article(s) Description
957337-2 2-Critical   Mgmt in tmsh broken
942497-3 2-Critical   Declarative onboarding unable to download and install RPM
940021-4 2-Critical   Syslog-ng hang may lead to unexpected reboot
933409-1 2-Critical   Tomcat upgrade via Engineering Hotfix causes live-update files removal
932437-1 2-Critical   Loading SCF file does not restore files from tar file
927033-3 2-Critical   Installer fails to calculate disk size of destination volume
915305-6 2-Critical   Point-to-point tunnel flows do not refresh connection entries; traffic dropped/discarded
910201-4 2-Critical   OSPF - SPF/IA calculation scheduling might get stuck infinitely
908517-4 2-Critical   LDAP authenticating failures seen because of 'Too many open file handles at client (nslcd)'
829677-5 2-Critical   .tmp files in /var/config/rest/ may cause /var directory exhaustion
818253-5 2-Critical   Generate signature files for logs
776393-4 2-Critical   Memory leak in restjavad causing restjavad to restart frequently with OOM
739505-4 2-Critical   Automatic ISO digital signature checking not required when FIPS license active
967745-1 3-Major   Last resort pool error for the modify command for Wide IP
948769-6 3-Major   TMM panic with SCTP traffic
945265-5 3-Major   BGP may advertise default route with incorrect parameters
939541-1 3-Major   TMM may prematurely shut down during initialization when a lot of TMMs and interfaces are configured on a VE
936125-1 3-Major   SNMP request times out after configuring IPv6 trap destination
932233-1 3-Major   '@' no longer valid in SNMP community strings
930905-2 3-Major   Management route lost after reboot.
927941-6 3-Major   IPv6 static route BFD does not come up after OAMD restart
921361-3 3-Major   SSL client and SSL server profile names truncated in GUI
916821-1 3-Major   An authenticated user on iControlREST may gain elevated privilege level
915497-1 3-Major   New Traffic Class Page shows multiple question marks.
913433-2 3-Major   On blade failure, some trunked egress traffic is dropped.
909197-2 3-Major   The mcpd process may become unresponsive
904785-2 3-Major   Remotely authenticated users may experience difficulty logging in over the serial console
902401 3-Major   OSPFd SIGSEGV core when 'ospf clear' is done on remote device
898705-6 3-Major   IPv6 static BFD configuration is truncated or missing
898461-1 3-Major   Several SCTP commands unavailable for some MRF iRule events :: 'command is not valid in current event context'
896817-1 3-Major   iRule priorities error may be seen when merging a configuration using the TMSH 'replace' verb
895837-4 3-Major   Mcpd crash when a traffic-matching-criteria destination-port-list is modified
889041-4 3-Major   Failover scripts fail to access resolv.conf due to permission issues
888497-1 3-Major   Cacheable HTTP Response
879405-3 3-Major   Incorrect value in Transparent Nexthop property
877109-8 3-Major   Unspecified input can break intended functionality in iHealth proxy
876805-4 3-Major   Modifying address-list resets the route advertisement on virtual servers.
865177-5 3-Major   Cert-LDAP returning only first entry in the sequence that matches san-other oid
858197-5 3-Major   Merged crash when memory exhausted
830413-2 3-Major   Intermittent Virtual Edition deployment failure due to inability to access the ssh host key in Azure
820845-5 3-Major   Self-IP does not respond to ( ARP / Neighbour Discovery ) when EtherIP tunnels in use.
807337-6 3-Major   Config utility (web UI) output differs between tmsh and AS3 when the pool monitor is changed.
806073-8 3-Major   MySQL monitor fails to connect to MySQL Server v8.0
797829-7 3-Major   The BIG-IP system may fail to deploy new or reconfigure existing iApps
787885-3 3-Major   The device status is falsely showing as forced offline on the network map while actual device status is not.
749007-5 3-Major   South Sudan, Sint Maarten, and Curacao country missing in GTM region list
398683-5 3-Major K12304 Use of a # in a TACACS secret causes remote auth to fail
966277-2 4-Minor   BFD down on multi-blade system
933461-5 4-Minor   BGP multi-path candidate selection does not work properly in all cases.
931837-7 4-Minor   NTP has predictable timestamps
924429-1 4-Minor   Some large UCS archives may fail to restore due to the system reporting incorrect free disk space values
914761-4 4-Minor   Crontab backup to save UCS ends with Unexpected Error: UCS saving process failed.
902417-6 4-Minor   Configuration error caused by Drafts folder in a deleted custom partition
892677-6 4-Minor   Loading config file with imish adds the newline character


Local Traffic Manager Fixes

ID Number Severity Solution Article(s) Description
942921-1 2-Critical   TMM may consume excessive resources when processing APM traffic
937777-1 2-Critical   The invalid configuration of using HTTP::payload in a PEM Policy may cause the TMM to crash.
910653-6 2-Critical   iRule parking in clientside/serverside command may cause tmm restart
718189-10 2-Critical   Unspecified IP traffic can cause low-memory conditions
953845-2 3-Major   After re-initializing the onboard FIPS HSM, BIG-IP may lose access after second MCPD restart
949145-6 3-Major   Improve TCP's response to partial ACKs during loss recovery
946953-2 3-Major   HTTP::close used in iRule might not close connection.
944641-2 3-Major   HTTP2 send RST_STREAM when exceeding max streams
934993-1 3-Major   BIG-IP resets HTTP/2 connections when a peer exceeds a number of concurrent streams
931513-1 3-Major   Some sequence of HTTP packets may cause TMM to crash
916589-1 3-Major   QUIC drops 0RTT packets if CID length changes
915713-1 3-Major   Support QUIC and HTTP3 draft-29
915605-2 3-Major   Image install fails if iRulesLX is provisioned and /usr mounted read-write
913249-1 3-Major   Restore missing UDP statistics
901929-1 3-Major   GARPs not sent on virtual server creation
892941-1 3-Major K20105555 F5 SSL Orchestrator may fail to stop an attacker from exfiltrating data on a compromised client system (SNIcat)
880361-7 3-Major   TMM may crash while processing iRules LX commands
879413-7 3-Major   Statsd fails to start if one or more of its *.info files becomes corrupted
845333-7 3-Major   An iRule with a proc referencing a datagroup cannot be assigned to Transport Config
803629-8 3-Major   SQL monitor fails with 'Analyze Response failure' message even if recv string is correct
717346-8 3-Major K13040347 [WebSocket ] tmsh show /ltm profile WebSocket current and max numbers far larger than total
714642-7 3-Major   Ephemeral pool-member state on the standby is down
935593-5 4-Minor   Incorrect SYN re-transmission handling with FastL4 timestamp rewrite
914681-1 4-Minor   Value of tmm.quic.log.level can differ between TMSH and GUI
808409-5 4-Minor   Unable to specify if giaddr will be modified in DHCP relay chain
738032-4 4-Minor   BIG-IP system reuses cached session-id after SSL properties of the monitor has been changed.
859717-1 5-Cosmetic   ICMP-limit-related warning messages in /var/log/ltm
939841-1 2-Critical   BIG-IP MPTCP vulnerability CVE-2021-23003
939845-1 3-Major   Invalid MPTCP JOIN messages not immediately dropped


Global Traffic Manager (DNS) Fixes

ID Number Severity Solution Article(s) Description
953393-1 1-Blocking   TMM crashes when performing iterative DNS resolutions.
933405-1 1-Blocking K34257075 Zonerunner GUI hangs when attempting to list Resource Records
960437-1 2-Critical   The BIG-IP system may initially fail to resolve some DNS queries
918169-4 2-Critical   The GTM/DNS HTTPS monitor may fail to mark a service up when the SSL session undergoes an unclean shutdown.
916753-1 2-Critical   RESOLV::lookup returns empty string when querying against a local virtual server, and results in possible tmm core
837637-5 2-Critical K02038650 Orphaned bigip_gtm.conf can cause config load failure after upgrading
926593-1 3-Major   GTM/DNS: big3d gateway_icmp probe for IPv6 incorrectly returns 'state: timeout'
921625-1 3-Major   The certs extend function does not work for GTM/DNS sync group
891093-2 3-Major   iqsyncer does not handle stale pidfile
644192-9 3-Major K23022557 Query of "MX" "any" RR of CNAME wide IP results in NXDOMAIN
896861-1 4-Minor   PTR query enhancement for RESOLVER::name_lookup
853585-3 4-Minor   REST Wide IP object presents an inconsistent lastResortPool value


Application Security Manager Fixes

ID Number Severity Solution Article(s) Description
940249-1 2-Critical   Sensitive data is not masked after "Maximum Array/Object Elements" is reached
927617-1 2-Critical   "Illegal Base64 value" violation is detected for cookie with valid base64 value
954429-1 3-Major   User authorization changes for live update
943125-1 3-Major   Web-Socket request with JSON payload causing core during the payload parsing
941853-5 3-Major   Logging Profiles do not disassociate from virtual server when multiple changes are made
941621-1 3-Major   Brute Force breaks server's Post-Redirect-Get flow
940897-1 3-Major   Violations are detected for incorrect parameter in case of "Maximum Array/Object Elements" is reached
930017-1 3-Major   Bot defense profile upgrade fails from 14.x to 15.x/16.x with error match-order should be unique
929077-3 3-Major   Bot Defense Whitelist does not apply when using default Route Domain and XFF header
921677-1 3-Major   Deletion of bot-related ordered items via tmsh might cause errors when adding new items via GUI.
921337-6 3-Major   ASM processes some web-sockets requests longer than usual
918933-1 3-Major   Some ASM attack signatures do not match on cookies
918081-2 3-Major   Application Security Administrator role cannot create parent policy in the GUI
913757-2 3-Major   Error viewing security policy settings for virtual server with FTP Protocol Security
913137-2 3-Major   No learning suggestion on ASM policies enabled via LTM policy
910253-3 3-Major   BD error on HTTP response after upgrade
904053-1 3-Major   Unable to set ASM Main Cookie/Domain Cookie hashing to Never
903357-4 3-Major   Bot defense Profile list is loads too slow when there are 750 or more Virtual servers
893061-4 3-Major   Out of memory for restjavad
722337-4 3-Major   Always show violations in request log when post request is large
962817-1 4-Minor   Description field of a JSON policy overwrites policy templates description
960385-1 4-Minor   In rare conditions modal does not close when it should
935293-6 4-Minor   'Detected Violation' Field for event logs not showing
919001-3 4-Minor   Live Update: Update Available notification is shown twice in rare conditions
896285-1 4-Minor   No parent entity in suggestion to add predefined-filetype as allowed filetype
975233-1 1-Blocking   Advanced WAF/ASM buffer-overflow vulnerability CVE-2021-22992
935401-1 3-Major   BIG-IP ASM iControl REST vulnerability CVE-2021-23001


Application Visibility and Reporting Fixes

ID Number Severity Solution Article(s) Description
934721-4 2-Critical   TMM core due to wrong assert
924301-2 3-Major   Incorrect values in REST response for DNS/SIP
743826-5 3-Major   Incorrect error message: "Can't find pool []: Pool was not found" even though Pool member is defined with port any(0)
648242-7 3-Major K73521040 Administrator users unable to access all partition via TMSH for AVR reports


Access Policy Manager Fixes

ID Number Severity Solution Article(s) Description
910097-4 2-Critical   Changing per-request policy while tmm is under traffic load may drop heartbeats
896709-4 2-Critical   Add support for Restart Desktop for webtop in VMware VDI
924929-3 3-Major   Logging improvements for VDI plugin
914649-4 3-Major   Support USB redirection through VVC (VMware virtual channel) with BlastX
760629-6 3-Major   Remove Obsolete APM keys in BigDB
739570-5 3-Major   Unable to install EPSEC package
766017-7 4-Minor   [APM][LocalDB] Local user database instance name length check inconsistencies


Service Provider Fixes

ID Number Severity Solution Article(s) Description
952545-1 3-Major   'Current Sessions' statistics of HTTP2 pool may be incorrect
939529-1 3-Major   Branch parameter not parsed properly when topmost via header received with comma separated values
913373-1 3-Major   No connection error after failover with MRF, and no connection mirroring


Advanced Firewall Manager Fixes

ID Number Severity Solution Article(s) Description
938165-3 2-Critical   TMM Core after attempted update of IP geolocation database file
965617-4 3-Major   HSB mitigation is not applied on BDoS signature with stress-based mitigation mode
963237-4 3-Major   Non-EDNS response with RCODE FORMERR are blocked by AFM MARFORM vector.
938149-2 3-Major   Port Block Update log message is missing the "Start time" field


Carrier-Grade NAT Fixes

ID Number Severity Solution Article(s) Description
928553-4 2-Critical   LSN64 with hairpinning can lead to a tmm core in rare circumstances
966681-3 3-Major   NAT translation failures while using SP-DAG in a multi-blade chassis


Fraud Protection Services Fixes

ID Number Severity Solution Article(s) Description


Anomaly Detection Services Fixes

ID Number Severity Solution Article(s) Description
915489-3 4-Minor   LTM Virtual Server Health is not affected by iRule Requests dropped


Traffic Classification Engine Fixes

ID Number Severity Solution Article(s) Description
874677-4 2-Critical   Traffic Classification auto signature update fails from GUI
954937 3-Major   Tmm crash when GPA POLICY is used


iApp Technology Fixes

ID Number Severity Solution Article(s) Description
768085-6 4-Minor   Error in python script /usr/libexec/iAppsLX_save_pre line 79


Protocol Inspection Fixes

ID Number Severity Solution Article(s) Description
825501-4 3-Major   IPS IM package version is inconsistent on slot if it was installed or loaded when a slot was offline.


Guided Configuration Fixes

ID Number Severity Solution Article(s) Description
959121-5 3-Major   Not following best practices in Guided Configuration Bundle Install worker



Cumulative fixes from BIG-IP v16.0.1 that are included in this release


Vulnerability Fixes

ID Number CVE Solution Article(s) Description
935029-4 CVE-2020-27720 K04048104 TMM may crash while processing IPv6 NAT traffic
928321-4 CVE-2020-27719 K19166530 K19166530: XSS vulnerability CVE-2020-27719
917509-2 CVE-2020-27718 K58102101 ASM processes some requests longer than usual
908673-6 CVE-2020-27717 K43850230 TMM may crash while processing DNS traffic
891457-1 CVE-2020-5939 K75111593 NIC driver may fail while transmitting data
888417-6 CVE-2020-8840 K15320518 Apache Vulnerability: CVE-2020-8840
879745-6 CVE-2020-5942 K82530456 TMM may crash while processing Diameter traffic
876353-2 CVE-2020-5941 K03125360 iRule command RESOLV::lookup may cause TMM to crash
814953-8 CVE-2020-5940 K43310520 TMUI dashboard hardening
928037-1 CVE-2020-27729 K15310332 APM Hardening
919989-3 CVE-2020-5947 K64571774 TMM does not follow TCP best practices
919841-4 CVE-2020-27728 K45143221 AVRD may crash while processing Bot Defense traffic
917469-1 CVE-2020-5946 K53821711 TMM may crash while processing FPS traffic
917005-6 CVE-2020-8619 K19807532 ISC BIND Vulnerability: CVE-2020-8619
912969-1 CVE-2020-27727 K50343630 iAppsLX Security Hardening
910017-1 CVE-2020-5945 K21540525 Security hardening for the TMUI Interface page
905125-1 CVE-2020-27726 K30343902 Security hardening for APM Webtop
898949-6 CVE-2020-27724 K04518313 APM may consume excessive resources while processing VPN traffic
778049-1 CVE-2018-13405 K00854051 Linux Kernel Vulnerability: CVE-2018-13405
693360-1 CVE-2020-27721 K52035247 A virtual server status changes to yellow while still available
818213-7 CVE-2019-10639 K32804955 CVE-2019-10639: KASLR bypass using connectionless protocols
889557 CVE-2019-11358 K20455158 jQuery Vulnerability CVE-2019-11358
839145-4 CVE-2019-10744 K47105354 CVE-2019-10744: lodash vulnerability
834533-8 CVE-2019-15916 K57418558 Linux kernel vulnerability CVE-2019-15916


Functional Change Fixes

None


TMOS Fixes

ID Number Severity Solution Article(s) Description
947905-1 1-Blocking   Upgrade from 14.1.4 or 15.1.1 to 16.0.0 or 16.0.0.1 fails
896217-1 2-Critical   BIG-IP GUI unresponsive
871561-6 2-Critical   Software installation on vCMP guest fails with '(Software compatibility tests failed.)' or '(The requested product/version/build is not in the media.)'
706521-1 2-Critical K21404407 The audit forwarding mechanism for TACACS+ uses an unencrypted db variable to store the password
924493-1 3-Major   VMware EULA has been updated
904845-1 3-Major   VMware guest OS customization works only partially in a dual stack environment.
904705-1 3-Major   Cannot clone Azure marketplace instances.
886689-7 3-Major   Generic Message profile cannot be used in SCTP virtual
880625-4 3-Major   Check-host-attr enabled in LDAP system-auth creates unusable config
880165-3 3-Major   Auto classification signature update fails
844085-5 3-Major   GUI gives error when attempting to associate address list as the source address of multiple virtual servers with the same destination address
814585-8 3-Major   PPTP profile option not available when creating or modifying virtual servers in GUI
788577-8 3-Major   BFD sessions may be reset after CMP state change
759564-1 3-Major   GUI not available after upgrade
740589-5 3-Major   Mcpd crash with core after 'tmsh edit /sys syslog all-properties'
714176-6 3-Major   UCS restore may fail with: Decryption of the field (privatekey) for object (9717) failed
489572-6 3-Major K60934489 Sync fails if file object is created and deleted before sync to peer BIG-IP
919745-1 4-Minor   CSV files downloaded from the Dashboard have the first row with all 'NaN
918209-4 4-Minor   GUI Network Map icons color scheme is not section 508 compliant
906889-2 4-Minor   Incorrect totals for New Flows under Security :: Debug :: Flow Inspector :: Get Flows.
890277-4 4-Minor   Full config sync to a device group operation takes a long time when there are a large number of partitions.
864757-4 4-Minor   Traps that were disabled are enabled after configuration save
779857-3 4-Minor   Misleading GUI error when installing a new version in another partition
751103-1 4-Minor   TMSH: 'tmsh save sys config' prompts question when display threshold is configured which is causing scripts to stop


Local Traffic Manager Fixes

ID Number Severity Solution Article(s) Description
919885-1 2-Critical   A TCP connection is not closed after invoking the HTTP::respond iRule command.
948757-1 3-Major   A snat-translation address responds to ARP requests but not to ICMP ECHO requests.
915689-2 3-Major   HTTP/2 dynamic header table may fail to identify indexed headers on the response side.
915281-3 3-Major   Do not rearm TCP Keep Alive timer under certain conditions
910521-1 3-Major   Support QUIC and HTTP draft-28
892385-5 3-Major   HTTP does not process WebSocket payload when received with server HTTP response
803233-6 3-Major   Pool may temporarily become empty and any virtual server that uses that pool may temporarily become unavailable
932937-1 4-Minor   HTTP Explicit Proxy configurations can result in connections hanging until idle timeout.
926997-2 4-Minor   QUIC HANDSHAKE_DONE profile statistics are not reset


Global Traffic Manager (DNS) Fixes

ID Number Severity Solution Article(s) Description
919553-1 2-Critical   GTM/DNS monitors based on the TCP protocol may fail to mark a service up when the server's response spans multiple packets.
788465-6 2-Critical   DNS cache idx synced across HA group could cause tmm crash
783125-5 2-Critical   iRule drop command on DNS traffic without Datagram-LB may cause TMM crash
789421-5 3-Major   Resource-administrator cannot create GTM server object through GUI


Application Security Manager Fixes

ID Number Severity Solution Article(s) Description
901061-1 3-Major   Safari browser might be blocked when using Bot Defense profile and related domains.
900797-1 3-Major   Brute Force Protection (BFP) hash table entry cleanup
900793-4 3-Major K32055534 APM Brute Force Protection resources do not scale automatically
900789-1 3-Major   Alert before Brute Force Protection (BFP) hash are fully utilized
892653-4 3-Major   Unable to define Maximum Query String Size and Maximum Request Size fields for Splunk Logging Format in the GUI


Application Visibility and Reporting Fixes

ID Number Severity Solution Article(s) Description
908065-1 3-Major   Logrotation for /var/log/avr blocked by files with .1 suffix
902485-5 3-Major   Incorrect pool member concurrent connection value
841305-3 3-Major   HTTP/2 version chart reports are empty in GUI; error appears in GUI and reported in monpd log
819301-3 3-Major   Incorrect values in REST response for dos-l3 table


Access Policy Manager Fixes

ID Number Severity Solution Article(s) Description
892937-1 3-Major K20105555 F5 SSL Orchestrator may fail to stop an attacker from exfiltrating data on a compromised client system (SNIcat)
747020-3 3-Major   Requests that evaluate to same subsession can be processed concurrently


Service Provider Fixes

ID Number Severity Solution Article(s) Description
904373-4 3-Major   MRF GenericMessage: Implement limit to message queues size
898997-1 3-Major   GTP profile and GTP::parse iRules do not support information element larger than 2048 bytes
891385-1 3-Major   Add support for URI protocol type "urn" in MRF SIP load balancing
876953-1 3-Major   Tmm crash while passing diameter traffic
817369-3 3-Major   TCP, UDP, and SCTP proxy converts to GEO proxy when georedundancy profile is attached with virtual server.
924349-3 4-Minor   DIAMETER MRF is not compliance with RFC 6733 for Host-ip-Address AVP over SCTP
916781-3 4-Minor   Validation error while attaching DoS profile to GTP virtual


Fraud Protection Services Fixes

ID Number Severity Solution Article(s) Description
933741-1 2-Critical   Security hardening in FPS GUI
876581-1 3-Major   JavaScript engine file is empty if the original HTML page cached for too long
891729-1 4-Minor   Errors in datasyncd.log
759988-1 4-Minor   Geolocation information inconsistently formatted
940401-1 5-Cosmetic   Mobile Security 'Rooting/Jailbreak Detection' now reads 'Rooting Detection'


Device Management Fixes

ID Number Severity Solution Article(s) Description
932065-1 3-Major   iControl REST framework exception handling hardening



Cumulative fixes from BIG-IP v16.0.0.1 that are included in this release


Vulnerability Fixes

ID Number CVE Solution Article(s) Description
935721-6 CVE-2020-8622, CVE-2020-8623, CVE-2020-8624 K82252291 ISC BIND Vulnerabilities: CVE-2020-8622, CVE-2020-8623, CVE-2020-8624


Functional Change Fixes

None


Cumulative fix details for BIG-IP v16.0.1.1 that are included in this release

981169-1 : F5 TMUI XSS vulnerability CVE-2021-22994

Solution Article: K66851119


976925-1 : BIG-IP APM VPN vulnerability CVE-2021-23002

Solution Article: K71891773


975233-1 : Advanced WAF/ASM buffer-overflow vulnerability CVE-2021-22992

Component: Application Security Manager

Symptoms:
For more information, please see:
https://support.f5.com/csp/article/K52510511

Conditions:
For more information, please see:
https://support.f5.com/csp/article/K52510511

Impact:
For more information, please see:
https://support.f5.com/csp/article/K52510511

Workaround:
None

Fix:
For more information, please see:
https://support.f5.com/csp/article/K52510511


973333-6 : TMM buffer-overflow vulnerability CVE-2021-22991

Solution Article: K56715231


967745-1 : Last resort pool error for the modify command for Wide IP

Component: TMOS

Symptoms:
System reports error for the modify command for Wide IP.

01b60021:3: Last resort pool type not specified for Wide IP 9084.example.com of type A.

Conditions:
Running the modify command involving last-resort-pool and not specifying a type or name for the object.

Impact:
The object is not modified, and the system reports an error.

Workaround:
The GSLB type needs to be given for any and all TMSH commands that utilize GTM Wide IPs or GTM Pools.

Append the command with last-resort-pool a <pool_name>, for example:

modify a 9084.example.com aliases replace-all-with { 9084.example1.com } last-resort-pool a pool1_test

Fix:
The GSLB type needs to be given for any and all TMSH commands that utilize GTM Wide IPs or GTM Pools.


966681-3 : NAT translation failures while using SP-DAG in a multi-blade chassis

Component: Carrier-Grade NAT

Symptoms:
NAT translation fails

Conditions:
-- VIPRION multi-blade chassis
-- Configure AFM NAT/CGNAT and attach the AFM NAT Policy / lsnpool to the virtual server
-- Configure sp-dag on the vlan's

Impact:
Traffic failure, performance degraded

Workaround:
Change the DB variable tm.lsn.retries to the maximum value of 4096

Fix:
Increase the number of attempts in selecting local translation IP (an IP when used makes the return packet to land on the same TMM where the NAT selection is happening). This can be controlled with DB variable tm.lsn.retries. The actual attempts is 16 times the value set in this db variable.


966277-2 : BFD down on multi-blade system

Component: TMOS

Symptoms:
After a secondary blade reboots in a multi-blade system, bi-directional forwarding detection (BFD) stops functioning.

Conditions:
-- Multi-blade VIPRION environment
-- BFD enabled
-- A secondary blade reboots

Impact:
BFD flaps on the secondary blade that was rebooted. The BFD session flap clears the routes on the peer.


965617-4 : HSB mitigation is not applied on BDoS signature with stress-based mitigation mode

Component: Advanced Firewall Manager

Symptoms:
BDoS signature attacks are mitigated in software rather than via HSB

Conditions:
Dynamic or custom signature in stress-based mitigation mode on appliance with HSB support

Impact:
More resources loading during DDoS attack

Fix:
Correct free spot search with offloading to HSB


963237-4 : Non-EDNS response with RCODE FORMERR are blocked by AFM MARFORM vector.

Component: Advanced Firewall Manager

Symptoms:
When a client sends a DNS request to a NON EDNS capable server, the server may send a legitimate response with RCODE FORMERR and no DNS data. The MALFORM DNS vector blocks those requests.

Conditions:
-- The client sends a DNS request to NON EDNS capable server
-- The server replies with RCODE FORMERR and no DNS data.

Impact:
AFM erroneously detects an attack and mitigates it, and the client does not get a responses from the EDNS server

Workaround:
Disable DNS MALFORM vector mitigation or put the EDNS server in allow list.


962817-1 : Description field of a JSON policy overwrites policy templates description

Component: Application Security Manager

Symptoms:
Creating a UTF-8 policy using a template for the first time creates a binary policy the system uses the next time you create a UTF-8 policy with the same template.

If the creation occurs via JSON policy import, the description field of the JSON policy overwrites the description from the template, and the next time you create a UTF-8 policy using the same template, the system uses the description from the first JSON policy.

Conditions:
Create an initial UTF-8 policy with some template using a JSON policy with a custom description.

Impact:
The next time you create a UTF-8 policy with the same template, unless you provide a description, the system uses the one from the initially created JSON policy instead the template.

Workaround:
Before creating the second policy, remove the binary file that was created from the first run. For example if the template used was Fundamental:

rm -f /ts/install/policy_templates/fundamental.bin

Fix:
The binary file now contains the correct description.


960437-1 : The BIG-IP system may initially fail to resolve some DNS queries

Component: Global Traffic Manager (DNS)

Symptoms:
Configurations that use a 'DNS Cache' or 'Network DNS Resolver' are affected by an issue whereby the system may initially fail to resolve some DNS queries.

Subsequent queries for the same domain name, however, work as expected.

Only some domain names are affected.

Conditions:
- The BIG-IP system is configured with either a DNS Cache or Network DNS Resolver.

- The cache is still empty in regard to the domain name being resolved (for example, TMM has just started).

- The cache configuration specifies 'Use IPv6' (the default) but the system has no IPv6 default route.

Impact:
Initial DNS resolution of some domain names fails. Regardless of whether this happens via a DNS cache or Network DNS Resolver, the failure cascades to the client.

In the case of a DNS Cache, the client may just be returned with no record. In the case of a Network DNS Resolver, the failure will depend on the feature using the resolver.

For instance, SWG, SSL Orchestrator, or the HTTP Explicit Forward Proxy, in general, are examples of features that rely on a Network DNS Resolver. In this case, the client's browser will fail to connect to the requested destination, and the client will be shown a proxy error.

Workaround:
Disable 'Use IPv6' in the affected DNS Cache or Network DNS Resolver.

1a. Go to DNS :: Caches :: Cache list.
OR
1b. Go to Network :: DNS Resolvers :: DNS Resolver list.
2. Select the item you want to update in the list.
3. Uncheck 'Use IPv6.
4, Select Update.

You can keep the object in this state (with no consequences) until you define an IPv6 default route on the system, and you wish for the system to also use IPv6 to connect to Internet name-servers.

Fix:
DNS resolution works as expected, with domains resolving the first time they are queried.


960385-1 : In rare conditions modal does not close when it should

Component: Application Security Manager

Symptoms:
When one modal is already opened in the GUI and the system tries to open another one, first one is not closed

Conditions:
In new policy settings pages following steps are needed:
 - open settings page and change something so that Save button becomes active
 - open modal (e.g. Add Webhook in General Settings)
 - press back in browser

Impact:
Unsaved changes modal is not visible.

Workaround:
Close modals before navigating back in the browser

Fix:
On open of new modal - all previous are forced to close


959121-5 : Not following best practices in Guided Configuration Bundle Install worker

Component: Guided Configuration

Symptoms:
Guided Configuration Bundle Install worker not following best practices

Conditions:
Guided Configuration Bundle Install worker not following best practices

Impact:
Guided Configuration Bundle Install worker not following best practices

Workaround:
None

Fix:
Guided Configuration Bundle Install worker now following best practices


957337-2 : Mgmt in tmsh broken

Component: TMOS

Symptoms:
TMSH Command: "list mgmt shared <tab>" does not display the tab complete option. You may see an error:

(tmos)# list mgmt shared echo *tab*
Unexpected Error: "Object contains no "method" child value"

Conditions:
When mgmt is used in a tmsh command and you attempt to tab complete

Impact:
You are unable to configure objects in mgmt.

This issue also prevents users with the admin role from accessing the following REST endpoints:

shared/authz/users
shared/echo-js

The error returned was HTTP/1.1 401 F5 Authorization Required

Fix:
Removing the condition that checks admin role of authUserReference during evaluatePermission.


955145-1 : iControl REST unauthenticated remote command execution vulnerability CVE-2021-22986

Solution Article: K03009991


954937 : Tmm crash when GPA POLICY is used

Component: Traffic Classification Engine

Symptoms:
Tmm crashes while passing traffic.

Conditions:
-- Traffic classification policy exists and is configured to block the application traffic
-- Application traffic is passed

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Use a PEM policy to block the traffic instead of a traffic classification policy

Fix:
Fixed a tmm crash when a traffic classification policy is configured to block application traffic.


954429-1 : User authorization changes for live update

Component: Application Security Manager

Symptoms:
User authorization changes for live update

Conditions:
WAF is provisioned

Impact:
User authorization changes for live update

Workaround:
None

Fix:
User authorization changes for live update


954381-1 : iControl REST unauthenticated remote command execution vulnerability CVE-2021-22986

Solution Article: K03009991


953845-2 : After re-initializing the onboard FIPS HSM, BIG-IP may lose access after second MCPD restart

Component: Local Traffic Manager

Symptoms:
When re-initializing an onboard HSM on particular platforms, BIG-IP may disconnect from the HSM after a second restart of the MCPD daemon.

This can occur when using administrative commands such as:
   -- tmsh run util fips-util init
   -- fipsutil init
   -- tmsh run util fips-util loginreset -r
   -- fipsutil loginreset -r

Conditions:
-- Using the following platforms:
  + i5820-DF / i7820-DF
  + 5250v-F / 7200v-F
  + 10200v-F
  + 10350v-F
  + vCMP guest on i5820-DF / i7820-DF
  + vCMP guest on 10350v-F

Impact:
BIG-IP is unable to communicate with the onboard HSM.

Workaround:
The last step in using "fipsutil init" is to restart all system services ("tmsh restart sys service all") or reboot.

Immediately before doing this:

-- open /config/bigip.conf in a text editor (e.g. vim or nano)
-- locate and delete the configuration "sys fipsuser f5cu" stanza, e.g.:

    sys fipsuser f5cu {
        password $M$Et$b3R0ZXJzCg==
    }

Fix:
Fixed an issue with re-initializing the onboard FIPS HSM.


953729-1 : Advanced WAF/ASM TMUI authenticated remote command execution vulnerabilities CVE-2021-22989 and CVE-2021-22990

Solution Article: K56142644


953677-1 : TMUI authenticated remote command execution vulnerabilities CVE-2021-22987 and CVE-2021-22988

Solution Article: K18132488


953393-1 : TMM crashes when performing iterative DNS resolutions.

Component: Global Traffic Manager (DNS)

Symptoms:
TMM crashes and produces a core file.

Conditions:
The BIG-IP system configuration includes a Network DNS Resolver, which is referenced by another object (for example, a HTTP Explicit Forward Proxy profile) for DNS resolution.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
You may be able to work around this issue by having the Network DNS Resolver work in forwarding/recursive mode rather than in resolving/iterative mode.

To do so, you configure a Forward Zone in the Network DNS Resolver for '.' (the DNS root). This causes DNS to send all DNS requests to a different, external resolver of your choice, which will perform recursive resolution.

The servers you configure for the '.' Forward Zone could be resolvers internal to your organization or public resolvers (e.g. Google DNS).

Fix:
TMM no longer crashes.


952545-1 : 'Current Sessions' statistics of HTTP2 pool may be incorrect

Component: Service Provider

Symptoms:
In HTTP2 full proxy deployment, the LTM pool 'cur_sessions' statistics may show an unusually large number, such as 18446743927680663552

Conditions:
-- HTTP2 full proxy deployment
-- A client sends multiple requests over multiple streams

Impact:
'Current Sessions' statistics can be used to track number of pending requests in the queue and it can underflow.

Workaround:
None.

Fix:
'Current Sessions' statistics of HTTP2 pool reports correctly.


951705-1 : iControl REST unauthenticated remote command execution vulnerability CVE-2021-22986

Solution Article: K03009991


950077-1 : TMUI authenticated remote command execution vulnerabilities CVE-2021-22987 and CVE-2021-22988

Solution Article: K18132488


949145-6 : Improve TCP's response to partial ACKs during loss recovery

Component: Local Traffic Manager

Symptoms:
- A bursty retransmission occurs during TCP's loss recovery period.

Conditions:
- TCP filter is used.
- TCP stack is used instead of TCP4 stack (based on profile settings).
- Packet loss occurs during the data transfer and TCP's loss recovery takes place.

Impact:
The bursty retransmissions may lead to more data getting lost due to large amount of data being injected into the network.

Workaround:
In versions prior to v16.0.0, use a TCP profile which selects the TCP4 stack instead of the TCP stack. There is no workaround for version 16.0.0.

Fix:
Partial ACK handling during loss recovery is improved.


948769-6 : TMM panic with SCTP traffic

Component: TMOS

Symptoms:
TMM panics and generates a core file. The panic message is "balanced nodes".

Conditions:
SCTP enabled virtual server

Impact:
Traffic interrupted while TMM restarts

Workaround:
Ensure that you have a route to the server's alternate address (like a default route since the remote server might not be under direct control) or
On versions earlier than 13.0 make sure that auto-lasthop is enabled for the virtual server (either via global, vlan or virtual setting)

Fix:
TMM now handles SCTP traffic properly


948757-1 : A snat-translation address responds to ARP requests but not to ICMP ECHO requests.

Component: Local Traffic Manager

Symptoms:
A snat-translation address with ARP enabled responds to ARP requests but not ICMP ECHO requests.

Conditions:
A snat-translation address is configured with ARP enabled.

Impact:
Application traffic should not be impacted, as external hosts trying to resolve the snat-translation and return traffic to it should still be able to do so; however, ping is an important network troubleshooting tool, and not being able to ping the address may create confusion.

Workaround:
None.

Fix:
A snat-translation now correctly responds to both ARP requests and ICMP ECHO requests.


947905-1 : Upgrade from 14.1.4 or 15.1.1 to 16.0.0 or 16.0.0.1 fails

Component: TMOS

Symptoms:
Loading configuration process fails after an upgrade from 14.1.4 or 15.1.1 to release 16.0.0 or 16.0.0.1. The system posts errors similar to the following:

-- info tmsh[xxxx]: cli schema (15.1.1) has been loaded from schema data files.
-- crit tmsh[xxxx]: 01420001:2: Can't load keyword definition (user-account.session_limit) : framework/SchemaCmd.cpp, line 825.
-- emerg load_config_files[xxxx]: "/usr/bin/tmsh -n -g -a load sys config partitions all base " - failed. -- Loading schema version: 15.1.1.
-- err mcpd[xxxx]: 01070422:3: Base configuration load failed.
-- Unexpected Error: "Can't load keyword definition (user-account.session_limit)".
-- Syntax Error:(/config/bigip_user.conf at line: 10) "session-limit" unknown property

Conditions:
Upgrade from release 14.1.4 or 15.1.1 to release 16.0.0 or 16.0.0.1.

Impact:
After upgrade, config does not load. The system hangs at the base configuration load failure status.

Workaround:
Although there is no workaround, you can avoid this issue by upgrading from 14.1.4 or 15.1.1 to a release later than 16.0.0.1.


946953-2 : HTTP::close used in iRule might not close connection.

Component: Local Traffic Manager

Symptoms:
HTTP::close used in an iRule might not close the connection. For example:

when HTTP_REQUEST {
    HTTP::close
    HTTP::respond 200 -version 1.1 content "OK" Content-Type text/plain
  }

Conditions:
Using HTTP::close along with HTTP::respond

Impact:
HTTP connection can be re-used.

Workaround:
Explicitly add close header in the HTTP::respond. For example:

HTTP::respond 200 content "OK" Connection close

Fix:
Fixed an issue where HTTP::close might not close a connection.


945265-5 : BGP may advertise default route with incorrect parameters

Component: TMOS

Symptoms:
If a BGP neighbor is configured with 'default originate,' the nexthop advertised for the default route may be incorrect.

Conditions:
-- Dynamic routing enabled.
-- Using BGP.
-- BGP neighbor configured with 'default originate'.

Impact:
The default route advertised via BGP is not acceptable to peers until the BGP session is cleared.

Workaround:
In imish, run the command:
clear ip bgp <affected neighbor address>


944641-2 : HTTP2 send RST_STREAM when exceeding max streams

Component: Local Traffic Manager

Symptoms:
If the SETTINGS_MAX_CONCURRENT_STREAMS setting is exceeded, BIG-IP sends a GOAWAY frame; however, browsers expect a RST_STREAM and the GOAWAY frame results in a half-rendered web page.

Conditions:
The maximum streams setting is exceeded on a HTTP/2 connection.

Impact:
BIG-IP sends a GOAWAY frame, and the browser shows a half-rendered page.

Workaround:
None.

Fix:
BIG-IP now sends a RST_STREAM if the maximum streams setting is exceeded.


943125-1 : Web-Socket request with JSON payload causing core during the payload parsing

Component: Application Security Manager

Symptoms:
Any web-socket request with JSON payload may cause a core witihin the JSON parser, depending on the used machine memory distribution.

Conditions:
Depends on the memory distribution of the used machine.
Sending web-socket request with JSON payload to the backend server.

Impact:
BD crash while parsing the JSON payload.

Workaround:
N/A

Fix:
No crashes during JSON payload parsing.


942921-1 : TMM may consume excessive resources when processing APM traffic

Component: Local Traffic Manager

Symptoms:
Under certain conditions, TMM may consume excessive resources when processing APM traffic.

Conditions:
-- APM provisioned.
-- VPN tunnel configured and established.
-- Undisclosed network conditions.

Impact:
TMM consumes excessive resources leading to terminated connections and potentially to a failover event.

Workaround:
None

Fix:
TMM now processes APM traffic as expected.


942497-3 : Declarative onboarding unable to download and install RPM

Component: TMOS

Symptoms:
Installation of declarative onboarding RPM fails.

Conditions:
Use of icontrollx_package_urls in tmos_declared block to download/install RPMs via a URL.

Impact:
RPMs cannot be downloaded for declarative onboarding where RPMs are referenced via URL.

Workaround:
RPMs must be installed manually.

Fix:
The installation directory was updated to fix the RPM installation issue.


941853-5 : Logging Profiles do not disassociate from virtual server when multiple changes are made

Component: Application Security Manager

Symptoms:
When multiple Logging Profiles profile changes are made in a single update, the previous Logging Profiles are not disassociated from the virtual server. Additionally, when an Application Security Logging Profile change is made, newly added Protocol Security Logging Profile settings do not take effect.

Conditions:
Multiple Logging Profile changes are made in a single update.

Impact:
The previous Logging Profiles are not disassociated from the virtual server.

Workaround:
Perform each Log Profile change individually. For example, to change an Application Security Log Profile:
1. Remove the current association and save.
2. Add the new association and save again.


941621-1 : Brute Force breaks server's Post-Redirect-Get flow

Component: Application Security Manager

Symptoms:
Brute Force breaks server's Post-Redirect-Get flow

Conditions:
ASM policy is attached to VS
Brute force protection is enabled.
CSI challenge or Captcha are in use.
Server implements Post-Redirect-Get flow.

Impact:
Brute Force breaks server's Post-Redirect-Get flow

Workaround:
None

Fix:
Support PRG mechanism in brute force mitigations.


940897-1 : Violations are detected for incorrect parameter in case of "Maximum Array/Object Elements" is reached

Component: Application Security Manager

Symptoms:
False positive violations are detected for incorrect parameter in case of "Maximum Array/Object Elements" is reached with enabled "Parse Parameter".

Conditions:
"JSON data does not comply with format settings" and "Illegal meta character in value" violations are enabled and content profile parsing is enabled in ASM.

Impact:
False positives detected, such as "Illegal meta character in value" violation and attack signature for incorrect context.

Workaround:
N/A

Fix:
No false positives detected.


940401-1 : Mobile Security 'Rooting/Jailbreak Detection' now reads 'Rooting Detection'

Component: Fraud Protection Services

Symptoms:
MobileSafe SDK does not support iOS jailbreak detection, so the GUI should refer only to Android Rooting Detection.

Conditions:
-- Fraud Protection Service (FPS) provisioned.
-- FPS and MobileSafe Licensed.

Impact:
Introduces confusion when indicating that iOS jailbreak detection is supported, which it is not.

Workaround:
None.

Fix:
Section now reads 'Rooting Detection'.


940249-1 : Sensitive data is not masked after "Maximum Array/Object Elements" is reached

Component: Application Security Manager

Symptoms:
If "Maximum Array/Object Elements" is reached and "JSON data does not comply with format settings" is detected, then all sensitive
data after last allowed element is not masked.

Conditions:
Define JSON profile, set "JSON data does not comply with format settings" to blocking and set "Maximum Array/Object Elements" to desired value.

Impact:
Data after last allowed element is not masked.

Fix:
Now the values are masked.


940021-4 : Syslog-ng hang may lead to unexpected reboot

Component: TMOS

Symptoms:
A syslog-ng issue with remote logging to an invalid remote syslog server may lead to unexpected reboot.

The BIG-IP may unexpectedly reboot after a host watchdog timeout when syslog-ng gets hung up.

Logs via syslog-ng are no longer written, though logging not via syslog-ng continues unaffected.
This happens at the time of the last 'Syslog connection broken' in /var/log/messages before reboot.
That message will appear without a preceding 'Syslog connection established' just before it with same timestamp.

At this time syslog-ng typically spins, using near 100% CPU (just one core equivalent, not all CPU capacity on system).

Typically things appear fine on rest of system - there will usually be adequate CPU and memory.
Hours or days later graphs will have a gap of usually tens of minutes to hours before an unexpected reboot.

Post reboot logs (in /var/log/sel for iSeries or ltm log otherwise) show this is a host watchdog reboot.
After reboot the system runs correctly, though if the syslog-ng remote server was invalid this remains the case.

Conditions:
Invalid syslog-ng server configuration or broken connection from BIG-IP toward configured syslog-ng remote server.

A server is configured as a remote syslog destination on the BIG-IP, but it or an intervening system responds to stream of log messages by breaking connection eg by sending ICMP port unreachable to BIG-IP.

Syslog-ng will note the connection attempt and that it has broken usually in the same second, and do so every 60s when it retries.
There may be many of these log pairs, repeating every minute in /var/log/messages, such as:

  Nov 25 03:14:01 localhost.localdomain notice syslog-ng[12452]: Syslog connection established; fd='14', server='AF_INET(192.168.1.1:514)', local='AF_INET(0.0.0.0:0)'
  Nov 25 03:14:01 localhost.localdomain notice syslog-ng[12452]: Syslog connection broken; fd='14', server='AF_INET(192.168.1.1:514)', time_reopen='60'

The final log will of a broken connection only, usually one minute after the last established/broken pair.

  Nov 25 03:15:01 localhost.localdomain notice syslog-ng[12452]: Syslog connection broken; fd='14', server='AF_INET(192.168.1.1:514)', time_reopen='60'

Impact:
Very rarely syslog-ng hangs in a non-functional state. Sometimes, this may lead to an unexpected reboot of BIG-IP. Loss of logs before restart and traffic disrupted while BIG-IP restarts.

Workaround:
Ensure syslog-ng server configuration is valid, and that the server is reachable.

Fix:
Fixed an issue with syslog-ng hang occasionally causing a system restart.


939841-1 : BIG-IP MPTCP vulnerability CVE-2021-23003

Component: Local Traffic Manager

Symptoms:
For more information, please see:
https://support.f5.com/csp/article/K43470422

Conditions:
For more information, please see:
https://support.f5.com/csp/article/K43470422

Impact:
For more information, please see:
https://support.f5.com/csp/article/K43470422

Workaround:
None

Fix:
For more information, please see:
https://support.f5.com/csp/article/K43470422


939845-1 : Invalid MPTCP JOIN messages not immediately dropped

Component: Local Traffic Manager

Symptoms:
An invalid MPTCP JOIN message is not dropped immediately. Instead a RST will be sent to the originator after a few second timeout

Conditions:
A standard virtual server processing TCP traffic is configured

Impact:
A brief delay before the connection is closed may be noticed

Workaround:
None

Fix:
Invalid MPTCP messages are now dropped immediately


939541-1 : TMM may prematurely shut down during initialization when a lot of TMMs and interfaces are configured on a VE

Component: TMOS

Symptoms:
TMM may prematurely shut down (during its initialization) when several TMMs and interfaces are configured. The system logs messages in one or more TMM log files (/var/log/tmm*):
MCP connection aborted, exiting.

Conditions:
-- BIG-IP Virtual Edition (VE).
-- Happens during TMM startup.
-- The issue is intermittent, but is more likely to occur on systems with a lot of TMMs (more 20 in most cases) and several interfaces (approximately 8 or more).

Impact:
TMM shuts down prematurely. Traffic disrupted while tmm restarts. Possible deadlock and MCP restart loop requiring a full reboot of the BIG-IP device.

Workaround:
None.

Fix:
TMM no longer shuts down prematurely during initialization.


939529-1 : Branch parameter not parsed properly when topmost via header received with comma separated values

Component: Service Provider

Symptoms:
MRF SIP in LoadBalancing Operation Mode inserts a VIA header to SIP request messages. This Via header is removed from the returned response message. The VIA header contains encrypted routing information to route the response message. The SIP specification states that INVITE/CANCEL messages in a dialogue should contain the same branch header. The code used to encrypt the branch field returns a different branch ID for INVITE and CANCEL messages.

Conditions:
-- Enabling SIP Via header insertion on the BIG-IP system.
-- SIP MRF profile.
-- Need to cancel an INVITE.
-- INVITE Via header received with multiple comma-separated values.

Impact:
Some SIP clients have code to verify the branch fields in the Via header. These clients expect the branch to be same for INVITE and CANCEL in a dialogue. Because the branch received is different, these clients are unable to identify the specific INVITE transaction. CANCEL is received and client sends a 481 error:

SIP/2.0 481 Call/Transaction Does Not Exist.

Workaround:
Use iRules to remove the topmost Via header and add new a new Via header that uses the same branch as INVITE and CANCEL while sending messages to SIP clients.

Fix:
The BIG-IP system now ensures the branch field inserted in the via header same for INVITE and CANCEL messages.


938165-3 : TMM Core after attempted update of IP geolocation database file

Component: Advanced Firewall Manager

Symptoms:
TMM crashes while running traffic that uses AFM Firewall policies.

Conditions:
-- Update IP geolocation database file to the latest version.
-- Configure AFM policies with logging enabled.
-- Run traffic which hits the AFM policies and triggers logging.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Revert to using the previously working version of the IP-geolocation file.

For more information, see K11176: Downloading and installing updates to the IP geolocation database :: https://support.f5.com/csp/article/K11176#restore.

Fix:
The BIG-IP system now validates the region/country strings returned by the geolocation database for IP addresses used in the traffic.


938149-2 : Port Block Update log message is missing the "Start time" field

Component: Advanced Firewall Manager

Symptoms:
Port Block Update log message is missing the "Start time" field.

Conditions:
-- Configure PBA mode in AFMNAT/CGNAT with subscriber awareness.
-- Trigger PBA Update log messages with change in susbsriber name for the same client IP address.

Impact:
NAT Log information is not usable for accounting purpose.

Fix:
Set the "start time" and "duration" log fields for all types of PBA log messages.


937777-1 : The invalid configuration of using HTTP::payload in a PEM Policy may cause the TMM to crash.

Component: Local Traffic Manager

Symptoms:
The iRule command HTTP::payload is not supported for use within Policy Enforcement Manager (PEM) policies. Attempting to use this within your configuration may result in the TMM crashing.

Conditions:
-- Policy Enforcement Manager (PEM) policy containing the iRule command HTTP::payload

Impact:
Traffic disrupted while the TMM restarts.

Workaround:
Do not use the iRule command HTTP::payload within Policy Enforcement Manager (PEM) policies.

Fix:
Having a Policy Enforcement Manager (PEM) policy containing the iRule command HTTP::payload will no longer cause the TMM to crash.


937637-2 : BIG-IP APM VPN vulnerability CVE-2021-23002

Solution Article: K71891773


936125-1 : SNMP request times out after configuring IPv6 trap destination

Component: TMOS

Symptoms:
SNMP request is times out.

Conditions:
This issue happens with TMOS version v15.1.0.4 or beyond after a IPv6 trap destination is configured.

Impact:
No response is returned for SNMP request.

Workaround:
Restart SNMP daemon by running the following TMSH command:

restart sys service snmpd

Fix:
N/A


935721-6 : ISC BIND Vulnerabilities: CVE-2020-8622, CVE-2020-8623, CVE-2020-8624

Solution Article: K82252291


935593-5 : Incorrect SYN re-transmission handling with FastL4 timestamp rewrite

Component: Local Traffic Manager

Symptoms:
FastL4 profiles configured with the TCP timestamp rewrite option enabled does not treat retransmitted SYNs in a correct manner.

Conditions:
FastL4 profile with TCP timestamp rewrite option is in use.

Impact:
Timestamp on some TCP packets sent by BIG-IP systems might be incorrect.

Workaround:
Do not use TCP timestamp rewrite.


935401-1 : BIG-IP ASM iControl REST vulnerability CVE-2021-23001

Component: Application Security Manager

Symptoms:
For more information, please see:
https://support.f5.com/csp/article/K06440657

Conditions:
For more information, please see:
https://support.f5.com/csp/article/K06440657

Impact:
For more information, please see:
https://support.f5.com/csp/article/K06440657

Workaround:
None

Fix:
For more information, please see:
https://support.f5.com/csp/article/K06440657


935293-6 : 'Detected Violation' Field for event logs not showing

Component: Application Security Manager

Symptoms:
Violation is missing/details not populated in the event log page, when a POST request with large number of parameters are sent to the BIG IP system.

Conditions:
-- A large POST request with lots of parameters is sent to BIG-IP system.
-- 'Learn New Parameters' is enabled.

Impact:
You cannot see the violation details.

Workaround:
Disabling parameter learning helps.

Note: This happens only with a large number of parameters. Usually it works as expected.

Fix:
The eventlog is reserving space for violations.


935029-4 : TMM may crash while processing IPv6 NAT traffic

Solution Article: K04048104


934993-1 : BIG-IP resets HTTP/2 connections when a peer exceeds a number of concurrent streams

Component: Local Traffic Manager

Symptoms:
The HTTP/2 protocol allows informing a peer about the number of concurrent streams it is allowed to have. When this number is exceeded, the RFC stipulates that the system must serve all open streams and then terminate a connection.

Conditions:
-- The BIG-IP system has a virtual server with an HTTP/2 profile configured on the client side.
-- A client opens more streams than a configured value for concurrent-streams-per-connection in HTTP/2 profile.

Impact:
BIG-IP resets a connection and a client (browser) does not receive any response for outstanding requests. It requires manually reload of the webpage to address the issue.

Workaround:
None.

Fix:
When a peer exceeds a number of concurrent streams allowed by BIG-IP systems, it sends GOAWAY with a REFUSED_STREAM error code and allows graceful completion of all open streams, and then terminates the connection.


934721-4 : TMM core due to wrong assert

Component: Application Visibility and Reporting

Symptoms:
TMM crashes with a core

Conditions:
AFM and AVR provisioned and collecting ACL statistics.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Disable the server-side statistics collection for the Network Firewall Rules using the following menu path:
Security :: Reporting : Settings : Reporting Settings : Network Firewall Rules.

Fix:
Fixed a tmm crash related to ACL statistics


933741-1 : Security hardening in FPS GUI

Component: Fraud Protection Services

Symptoms:
FPS GUI does not follow current best practices.

Conditions:
* Provision and license Fraud Protection Service (FPS).

Impact:
FPS GUI does not follow current best practices.

Workaround:
None.

Fix:
FPS GUI now follows current best practices.


933461-5 : BGP multi-path candidate selection does not work properly in all cases.

Component: TMOS

Symptoms:
ZebOS BGP might not properly clear the multi-path candidate flag when handling a BGP route.

Conditions:
An inbound route-map exists that modifies a route's path selection attribute.

Impact:
Incorrect path selection and/or a timer on a route getting refreshed every time the Routing Information Base (RIB) is scanned.

Workaround:
None.


933409-1 : Tomcat upgrade via Engineering Hotfix causes live-update files removal

Component: TMOS

Symptoms:
After applying an Engineering Hotfix ISO that contains an updated tomcat package, live-update files are inadvertently removed and live update no longer works properly.

Conditions:
Occurs after installing an Engineering Hotfix that contains the tomcat package.

Impact:
Live-update functionality does not work properly.

Workaround:
Although there is no workaround, you can install an updated Engineering Hotfix that uses a fixed version of the live-install package.

Fix:
Fixed an issue with inadvertently removing live-update files while applying an Engineering Hotfix.


933405-1 : Zonerunner GUI hangs when attempting to list Resource Records

Solution Article: K34257075

Component: Global Traffic Manager (DNS)

Symptoms:
Zonerunner GUI hangs when attempting to list Resource Records; mcpd times out.

Conditions:
Attempt to list Resource Records in Zonerunner GUI.

Impact:
Zonerunner hangs.

Workaround:
Zonerunner GUI is unusable until this issue is resolved. Use tmsh.


932937-1 : HTTP Explicit Proxy configurations can result in connections hanging until idle timeout.

Component: Local Traffic Manager

Symptoms:
After an HTTP return code of 400 Bad Request or 403 Forbidden, connection table entries may not be removed from the connection table until they reach the idle timeout threshold.

Conditions:
-- HTTP Explicit Proxy Configuration.
-- BIG-IP HTTP response contains a 400 Bad Request or 403 Forbidden status code.

Impact:
The hanging connection table entries can cause subsequent connections from the same source port to fail. Also, the subsequent connection attempts can cause the idle timer to be reset.

Workaround:
Use an iRule to prevent connections from hanging:

when HTTP_REJECT {
    after 1
}

Fix:
HTTP Explicit Proxy configurations no longer results in connections hanging until idle timeout.


932437-1 : Loading SCF file does not restore files from tar file

Component: TMOS

Symptoms:
Loading an SCF configuration file does not restore file objects from the SCF's associated tar file.

Restoring the SCF fails with an error similar to this if the running configuration does not already contain the file:

01070712:3: Failed: name (/Common/test-crt) Cache path (/config/filestore/files_d/Common_d/certificate_d/:Common:test-crt) does not exist and there is no copy in trash-bin to restore from.
Unexpected Error: Loading configuration process failed.

Conditions:
Restore an SCF archive that references file objects, e.g.:
-- SSL certificates
-- SSL keys
-- iFiles

Impact:
Restoring SCF does not restore contents of file objects.

Workaround:
None.


932233-1 : '@' no longer valid in SNMP community strings

Component: TMOS

Symptoms:
The '@' character is no longer valid in SNMP community strings.

Conditions:
Attempting to use the '@' character in SNMP community strings.

Impact:
Unable to use the '@' character in SNMP community strings. The system cannot process SNMP commands with community strings that contain the '@' character, and the commands fail.

Workaround:
Use a community string that does not contain the '@' character.


932065-1 : iControl REST framework exception handling hardening

Component: Device Management

Symptoms:
iControl REST framework does not follow best practices for exception handling

Conditions:
iControl REST framework use by an authenticated user.

Impact:
iControl REST framework does not follow best practices for exception handling

Workaround:
None.

Fix:
iControl REST framework now follows best practices for exception handling


931837-7 : NTP has predictable timestamps

Component: TMOS

Symptoms:
No known symptoms.

Conditions:
Ntpd in ntp before 4.2.8p14 and 4.3.x before 4.3.100 are vulnerable.

Two main prerequisites for this to be exploited.

1. Having the BIG-IP act as an NTP server.
2. Sources for BIG-IP's time being unreliable/unauthenticated upstream NTP servers

Impact:
A high-performance ntpd instance that gets its time from unauthenticated IPv4 time sources may be vulnerable to an off-path attacker who can query time from the victim's ntpd instance. An attacker who can send a large number of packets with the spoofed IPv4 address of the upstream server can use this flaw to modify the victim's clock by a limited amount or cause ntpd to exit.

Workaround:
Redhat suggested the following mitigations:

1. Have enough trustworthy sources of time.

2. If you are serving time to a possibly hostile network, have your system get its time from other than unauthenticated IPv4 over the hostile network.

3. Use NTP packet authentication where appropriate.

4. Pay attention to error messages logged by ntpd.

5. Monitor your ntpd instances. If the pstats command of ntpq shows the value for "bogus origin" is increasing then that association is likely under attack.

6. If you must get unauthenticated time over IPv4 on a hostile network, Use restrict ... noserve to prevent this attack (note that this is a heavy-handed protection), which blocks time service to the specified network.


931513-1 : Some sequence of HTTP packets may cause TMM to crash

Component: Local Traffic Manager

Symptoms:
Under certain conditions, TMM may crash while processing HTTP traffic.

Conditions:
A virtual with standard HTTP profile is configured.

Impact:
When TMM crashes it causes a failover event and may interrupt traffic processing.

Workaround:
None

Fix:
TMM now processes HTTP traffic as expected.


930905-2 : Management route lost after reboot.

Component: TMOS

Symptoms:
Management route lost after reboot, leading to no access to BIG-IP systems via management address.

Conditions:
-- 2NIC BIG-IP Virtual Edition template deployed in GCP (see https://github.com/F5Networks/f5-google-gdm-templates/tree/v3.0.3/supported/standalone/2nic/existing-stack/byol).

-- The instance is rebooted.

Impact:
After rebooting, the default route via the management interface no longer exists in the routing table. BIG-IP administrators are unable to connect to BIG-IP Virtual Edition via the management address.

Workaround:
Use either of the following workarounds:

-- Delete the route completely and reinstall the route.

-- Restart mcpd:
bigstart restart mcpd


930017-1 : Bot defense profile upgrade fails from 14.x to 15.x/16.x with error match-order should be unique

Component: Application Security Manager

Symptoms:
Upgrading Bot defense profile fails with match-order field 1 or 2 fails, while the error is "match-order should be unique"

Conditions:
- ASM provisioned
- Bot defense profile has allow list object (the GUI says whitelist object)
- The object has a field match-order = 1 or 2
- Upgrade happening from 14.x to 15.x/16.x

Impact:
Upgrade fails

Workaround:
Before upgrading
-- Change match-order field 1 to 3
-- Change match-order field 2 to 4

Fix:
Fix changes match-order field 1 to 3 and match-order field 2 to 4 programmatically


930005-1 : Recover previous QUIC cwnd value on spurious loss

Component: Local Traffic Manager

Symptoms:
If a QUIC packet is deemed lost, but an ACK for it is then received, the cwnd is halved despite there being no actual packet loss. Packet reordering can cause this situation to occur.

Conditions:
A QUIC packet is deemed lost, and an ACK for it is received before the ACK of its retransmission.

Impact:
Inefficient use of bandwidth in the presence of packet reordering.

Workaround:
None.

Fix:
QUIC congestion window is restored to its pre-recovery value on a spurious loss recovery.

Behavior Change:
QUIC congestion window is restored to its pre-recovery value on a spurious loss recovery.


929077-3 : Bot Defense Whitelist does not apply when using default Route Domain and XFF header

Component: Application Security Manager

Symptoms:
When configuring an IP address whitelist in Bot Defense Profile, using a default Route Domain, and sending a request with an X-Forwarded-For header the request might not be whitelisted.

Conditions:
-- Bot Defense Profile is attached to virtual server.
-- Bot Defense Profile has an IP address whitelist configured.
-- Using default Route Domain.
-- Sending a request with X-Forwarded-For header.
-- Might require heavy traffic.

Impact:
Request from a whitelisted IP address is blocked.

Workaround:
Whitelist the IP address using an iRule.

Fix:
The system now sets the correct route domain, so the correct IP addresses are whitelisted.


928553-4 : LSN64 with hairpinning can lead to a tmm core in rare circumstances

Component: Carrier-Grade NAT

Symptoms:
LSN64 with hairpinning configured can lead to a tmm core in rare circumstances.

Conditions:
- LSN64 virtual server.
- Hairpinning enabled.
- FLOW_INIT iRule.
- Full proxy config.

Impact:
Tmm cores. Traffic disrupted while tmm restarts.

Workaround:
Disable full proxy config of hairpinning.

Fix:
Tmm does not crash anymore.


928321-4 : K19166530: XSS vulnerability CVE-2020-27719

Solution Article: K19166530


928037-1 : APM Hardening

Solution Article: K15310332


927941-6 : IPv6 static route BFD does not come up after OAMD restart

Component: TMOS

Symptoms:
The Bidirectional Forwarding Detection (BFD) session for an IPv6 static route is not shown in response to the command:
imish -e "show bfd session"

Conditions:
-- BFD is configured with static route IPv6.
-- Restart the oamd process.

Impact:
BFD session is not shown in 'show bfd session'.

Workaround:
Restart tmrouted:
bigstart restart tmrouted

Fix:
IPv6 static route BFD session now comes up after restarting the oamd process.


927617-1 : "Illegal Base64 value" violation is detected for cookie with valid base64 value

Component: Application Security Manager

Symptoms:
Request that should be passed to the backend server with cookie header which contain cookie valid value encoded to base64 is blocked.

Conditions:
A cookie name has to be defined in "Security ›› Application Security : Headers : Cookies List ›› New Cookie..." with enabled "Base64 Decoding".

Impact:
Blocking page, while the request should not be blocked.

Workaround:
Disable "Base64 Decoding" for the desired cookie.

Fix:
Requests with valid base64 encoding cookies should not get blocked by the enforcer.


927033-3 : Installer fails to calculate disk size of destination volume

Component: TMOS

Symptoms:
Installation fails with a 'Disk full (volume group)' error in var/log/liveinstall.log:

error: tm_install::Process::Process_full_install -- predicted size for BIGIP14125 is 12315728, current location size is 11120640, and vg has 0 remaining.

Conditions:
Platforms with software RAID that also have a symlink in /dev/md that looks like the following:

[root@bigip1] images # ls -l /dev/md/
total 8
-rw-r--r--. 1 root root 5 2020-07-09 16:12 autorebuild.pid
lrwxrwxrwx. 1 root root 8 2020-07-09 16:51 localhost:0 -> ../md127
-rw-------. 1 root root 66 2020-07-09 16:11 md-device-map

Impact:
Unable to successfully upgrade.

Workaround:
Create the expected symlink manually:

cd /dev/md
ln -s ../md127 _none_\:0


926997-2 : QUIC HANDSHAKE_DONE profile statistics are not reset

Component: Local Traffic Manager

Symptoms:
QUIC HANDSHAKE_DONE profile statistics are not set back to 0 when statistics are reset.

Conditions:
A QUIC virtual server receives or sends HANDSHAKE_DONE frames, and the profile statistics are later reset.

Impact:
QUIC HANDSHAKE_DONE profile statistics are not reset.

Workaround:
Restart tmm to reset all statistics:

Impact of Workaround: Traffic disrupted while tmm restarts.

bigstart restart tmm

Fix:
QUIC HANDSHAKE_DONE profile statistics are reset properly.


926593-1 : GTM/DNS: big3d gateway_icmp probe for IPv6 incorrectly returns 'state: timeout'

Component: Global Traffic Manager (DNS)

Symptoms:
The GTM/DNS gateway_icmp monitor for IPv6 virtual servers sometimes returns 'state: timeout' even though big3d receives the packet successfully.

Conditions:
- GTM/DNS provisioned.
- IPv6 virtual server with gateway_icmp GTM/DNS monitor.

Impact:
IPv6 virtual servers are marked down unexpectedly.

Workaround:
Use a different gtm monitor type than gateway_icmp for IPv6 targets


924961-1 : CVE-2019-20892: SNMP Vulnerability

Solution Article: K45212738


924929-3 : Logging improvements for VDI plugin

Component: Access Policy Manager

Symptoms:
If the Virtual Desktop Interface (VDI) plugin aborts, the names of the events are not logged in the APM log file.

Conditions:
- Virtual Desktop Interface (VDI) configured
- The plugin encounters a problem and aborts

Impact:
Event names are not displayed in the APM log.

Workaround:
None.

Fix:
Event names along with the exceptions are also seen in the APM log file.


924493-1 : VMware EULA has been updated

Component: TMOS

Symptoms:
The End User License Agreement (EULA) presented in VMware is out of date.

Conditions:
The EULA is presented to the user when deploying an OVF template.

Impact:
The current EULA is version: DOC-0355-16 (as explained in K12902: End User License Agreement Change Notice :: https://support.f5.com/csp/article/K12902).

Although the OVA EULA for 16.0.0 shows: DOC-0355-12, the EULA presented during license activation is the EULA in force for this instance, so you can safely ignore the discrepancy; there is no functional impact.

Workaround:
None needed. The EULA presented during license activation is the EULA in force for this instance.

Fix:
The EULA presented in VMware was out of date and has been updated.


924429-1 : Some large UCS archives may fail to restore due to the system reporting incorrect free disk space values

Component: TMOS

Symptoms:
While restoring a UCS archive, you get an error similar to the following example:

/var: Not enough free space
535162880 bytes required
326418432 bytes available
/shared/my.ucs: Not enough free disk space to install!
Operation aborted.
/var/tmp/configsync.spec: Error installing package
Config install aborted.
Unexpected Error: UCS loading process failed.

As part of restoring UCS archives, some files (for example, the contents of the filestore) are temporarily copied to the /var/tmp directory.

The script that ensures enough free disk space is available for the UCS restore operation incorrectly reports the /var filesystem's free disk space for the /var/tmp directory.

This is incorrect, as /var/tmp is a symlink to /shared/tmp, and so the free disk space of the /shared filesystem should be used instead.

Conditions:
-- Restoring a UCS file.
-- The UCS file contains large items that are temporarily stored under the /var/tmp directory (for example, many EPSEC files, many large external data-groups, etc.).
-- The /var filesystem has limited free disk space.

Impact:
The UCS installation fails even if /var/tmp has sufficient disk space.

Workaround:
None.

Fix:
The UCS installation script now reports the correct free disk space for the /var/tmp directory, allowing UCS archive installations to complete.


924349-3 : DIAMETER MRF is not compliance with RFC 6733 for Host-ip-Address AVP over SCTP

Component: Service Provider

Symptoms:
Current Diameter CER/CEA messages does not advertise all HostIPAddresses.

Conditions:
-- Exchange Diameter messages CER/CEA between peers, configure a SNAT pool and an alternate address in the SCTP profile.
-- The CER from BIG-IP contains snatpool IP addresses
-- The CEA from BIG-IP contains alternate addresses

Impact:
Unable to see multiple HostIPAddress in CER/CEA

Fix:
Able to validate HostIpAddress as per RFC6733 on Diameter over SCTP.


924301-2 : Incorrect values in REST response for DNS/SIP

Component: Application Visibility and Reporting

Symptoms:
Some of the calculations are inaccurate/missing in the AVR publisher for DNS and SIP, and incorrect values are shown in the REST response.

Conditions:
-- Device vector detection and mitigation thresholds are set to 10.
-- A detection and mitigation threshold is reached

Impact:
An incorrect value is calculated in the REST response.

Fix:
Fixed an issue with incorrect calculation for DNS/SIP mitigation


921677-1 : Deletion of bot-related ordered items via tmsh might cause errors when adding new items via GUI.

Component: Application Security Manager

Symptoms:
When deleting (via tmsh) bot-related ordered list items like bot white-lists, bot-microservices, and bot-microservices URLs, an error occurs when adding and saving new items via GUI:

Bot defense profile <profile full name> error: match-order should be unique.

Conditions:
1.Create three items with consecutive match-orders values via tmsh, for example: three bot whitelist items, the first with match-order 1, the second with match-order 2, and the third with match-order 3.

2. Delete item with the value: match-order 2 (in tmsh), and save.

3. Switch to the GUI, add new whitelist item, and save.

Impact:
The system reports an error, and the bot configuration cannot be saved via GUI. However, dragging between items (and then dragging back) overcomes this error.

Workaround:
Drag between two items, and then drag back.

Fix:
Deletion of bot-related ordered items via tmsh no longer causes errors when adding new items via GUI.


921625-1 : The certs extend function does not work for GTM/DNS sync group

Component: Global Traffic Manager (DNS)

Symptoms:
When GTM/DNS systems in the same sync group receive the error 'SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca', these systems cannot automatically connect to BIG-IP devices with which that GTM/DNS device has not already exchanged a SSL cert.

As part of normal functionality, when one GTM/DNS tries to connect to a BIG-IP server and receives 'unknown ca' SSL error, if its peer GTM/DNS has already built a connection with that BIG-IP server, then the second GTM/DNS system should also be able to connect to that BIG-IP server automatically. But it cannot because of this issue.

The problem exists only when the GTM/DNS device has not exchanged a cert with the BIG-IP server object, and there are two or more certs in /config/httpd/conf/ssl.crt/server.crt on that GTM/DNS device.

You might see messages similar to the following:

-- iqmgmt_ssl_connect: SSL error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca.
-- err gtmd[28112]: 011ae0fa:3: iqmgmt_ssl_connect: SSL error: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca (336151576).
-- notice gtmd[28112]: 011ae03d:5: Probe to 10.10.0.3: buffer = <direct><![CDATA[<clientcert><ip>10.10.0.10</ip><target_ip>10.10.0.6</target_ip><cert>....

Conditions:
-- /config/httpd/conf/ssl.crt/server.crt file with two or more certs on the requesting GTM/DNS device.
-- Configuration is as follows:
   1. GTMDNS1 and GTMDNS2 are in a same GTM/DNS sync group.
   2. GTMDNS1 has a self-authorized CA cert.
   3. You add a BIG-IP server that is is reachable but with which GTMDNS1 has not exchanged SSL certs.

Impact:
Certain GTM/DNS systems in the sync group cannot automatically connect to BIG-IP devices as expected. You must run additional bigip_add commands on those GTM/DNS systems in the GTM/DNS sync group to add the BIG-IP server.

Workaround:
Run bigip_add on each GTM/DNS server to add the configured BIG-IP servers.


921421-4 : iRule support to get/set UDP's Maximum Buffer Packets

Component: Local Traffic Manager

Symptoms:
UDP profiles have a setting to set the Maximum Buffer Packets for UDP connections. This value cannot be modified with an iRule.

Conditions:
-- UDP profile is used.
-- You need to dynamically change the max buffer packets setting in an iRule.

Impact:
Unable to dynamically change the max buffer packets setting in an iRule.

Workaround:
None

Fix:
You can now dynamically change the max buffer packets setting in an iRule. The setting is UDP::max_buf_pkts

Behavior Change:
A new iRule command has been added, UDP::max_buf_pkts. This allows you to dynamically override the maximum number of packets setting in the UDP profile.


921361-3 : SSL client and SSL server profile names truncated in GUI

Component: TMOS

Symptoms:
Unable to see the full name of the SSL client and SSL server profiles when assigning them in the GUI.

Conditions:
In Local Traffic :: Virtual Server :: Properties, the fields for the 'Selected' and 'Available' lists are narrower than they were in previous versions.

Impact:
With longer SSL profile names, the full name is not visible. Even the default, provided profiles, such as crypto-server-default-clientssl and crypto-client-default-serverssl, are truncated.

Note: The fields remain at the limited width even when the browser window is maximized.

Workaround:
Use tmsh to see the full SSL client and SSL server name.


921337-6 : ASM processes some web-sockets requests longer than usual

Component: Application Security Manager

Symptoms:
ASM processes some web-socket requests longer than usual and can cause some latency when passing requests to the backend server.

Conditions:
Content profile parsing is enabled in ASM.

Impact:
Latency can be noted when passing web-socket requests to the backend server.

Workaround:
N/A

Fix:
ASM is processes web-socket requests as expected


920961-1 : Devices incorrectly report 'In Sync' after an incremental sync

Component: Application Security Manager

Symptoms:
The security policies assigned to a virtual server are different among the devices in a traffic-group.

Conditions:
-- ASM provisioned.
-- Manual Sync Active-Standby Failover Device Group with ASM sync enabled.
-- An L7 ASM security policy is manually changed on a virtual server (not using the ASM wizard).

Impact:
After incremental sync, devices report 'In Sync' but there is a configuration discrepancy in the security policy assigned to the virtual server.

Workaround:
Modify the underlying LTM policy to be 'legacy':
   # tmsh modify ltm policy <LTM Policy Name> legacy

Fix:
An internal config parameter is now available to work around this issue. In order to use the workaround, you must enable a db variable.

To enable the workaround, run the following command from the CLI on every device in the device group:
------------------------------------
# /usr/share/ts/bin/add_del_internal add force_legacy_ltm_policy 1

Operation completed successfully. Don't forget to restart ASM to apply changes.
------------------------------------

NOTE: In this specific case, ASM restart is not required, despite the fact that a message says it is.

Behavior Change:
There is now an internal config parameter that enables a workaround for this issue. In order to use the workaround, you must enable a db variable.

To enable the workaround, run the following command from the CLI on every device in the device group:
------------------------------------
# /usr/share/ts/bin/add_del_internal add force_legacy_ltm_policy 1

Operation completed successfully. Don't forget to restart ASM to apply changes.
------------------------------------

NOTE: In this specific case, ASM restart is not required, despite the fact that a message says it is.


919989-3 : TMM does not follow TCP best practices

Solution Article: K64571774


919885-1 : A TCP connection is not closed after invoking the HTTP::respond iRule command.

Component: Local Traffic Manager

Symptoms:
After sending a HTTP response that would normally cause the underlying TCP connection to get closed, the BIG-IP system fails to close the TCP connection.

Conditions:
- TCP profile is used.
- HTTP profile is used.
- HTTP::respond iRule command is used.
- The HTTP filter sets the "Connection: close" header (for example, in response to a HTTP/1.0 request that does not request Keep-Alive behavior).

Impact:
The TCP connection lives longer than needed, and even allows the client to send subsequent requests over the same connection.

Workaround:
N/A

Fix:
TCP connection is now closed as necessary after invoking the HTTP::respond iRule command.


919841-4 : AVRD may crash while processing Bot Defense traffic

Solution Article: K45143221


919745-1 : CSV files downloaded from the Dashboard have the first row with all 'NaN

Component: TMOS

Symptoms:
In the Dashboard .csv file, all of the values in the first row are set to 'NaN'

Conditions:
This is encountered when loading the downloaded Dashboard .csv files with historical data from the GUI.

Impact:
The first row of the downloaded .csv from Dashboard shows all the values as 'NaN'.

Workaround:
None.

Fix:
Fixed an issue with 'NaN' being reported in the first line of the downloaded dashboard .csv files.


919553-1 : GTM/DNS monitors based on the TCP protocol may fail to mark a service up when the server's response spans multiple packets.

Component: Global Traffic Manager (DNS)

Symptoms:
GTM/DNS monitors based on the TCP protocol may fail to find the configured receive string in the server's response, causing the monitored service to be incorrectly marked down.

Conditions:
This issue occurs when the server's response spans multiple packets (for example, when the response is particularly large or includes dynamically generated content delivered in chunks).

Impact:
A service is incorrectly marked down. This can cause the BIG-IP GTM/DNS to return a suboptimal answer or no answer at all to DNS queries.

Workaround:
This issue can be worked around by ensuring your server returns a response to the BIG-IP GTM/DNS's monitor that fits in one packet.

Fix:
GTM/DNS monitors based on the TCP protocol no longer fail when the server's response spans multiple packets.


919001-3 : Live Update: Update Available notification is shown twice in rare conditions

Component: Application Security Manager

Symptoms:
When entering Live Update page, sometimes Update Available notification is shown twice.

Conditions:
You first enters Live Update page.

Impact:
Notification is shown twice.

Workaround:
None.

Fix:
Notification is shown only once in all cases.


918933-1 : Some ASM attack signatures do not match on cookies

Component: Application Security Manager

Symptoms:
Some ASM attack signatures are not matching as expected on a cookie value.

Conditions:
Matching enabled for specific attack signatures.

Impact:
False negative. A signature does not match and an attack is getting through.

Workaround:
There is no valid workaround except creating custom signatures for cookies from all these signatures.

Fix:
Signatures now match on cookies as expected.


918209-4 : GUI Network Map icons color scheme is not section 508 compliant

Component: TMOS

Symptoms:
Network Map color scheme is not compliant with Section 508 of the Rehabilitation Act (section 508). There is no clear difference between a green/active node and the blue/square items. With the new system colors and flat shapes, the icons are nearly identical. Other than shape (circle vs. square), the new colors appear identical; the blue and green are nearly appearing as one color.

Conditions:
Accessing Network Map from GUI via Local Traffic :: Network Map.

Impact:
There is no clear color difference between a green/active node icon and the blue/square icon.

Workaround:
None.

Fix:
Modified the color codes. Now the Network Map icons color scheme is section 508 compliant.


918169-4 : The GTM/DNS HTTPS monitor may fail to mark a service up when the SSL session undergoes an unclean shutdown.

Component: Global Traffic Manager (DNS)

Symptoms:
The GTM/DNS HTTPS monitor may fail to find the configured receive string in a HTTP response, causing the monitored service to be incorrectly marked down.

Conditions:
This issue occurs when all of the following conditions are true:

-- The server being monitored performs an unclean shutdown of the SSL session (the underlying TCP connection is closed without first issuing a close notify alert at the SSL level).

-- The server's HTTP response does not terminate with a newline.

Impact:
A service is incorrectly marked down. This can cause the BIG-IP GTM/DNS to return a suboptimal answer or no answer at all to DNS queries.

Workaround:
This issue can be worked around by performing any one of the following actions:

-- Ensure the server issues a close notify alert before it closes the underlying TCP connection.

-- Ensure the server's HTTP response ends with a newline.

Fix:
The GTM/DNS HTTPS monitor no longer fails when the SSL peer performs an unclean shutdown.


918081-2 : Application Security Administrator role cannot create parent policy in the GUI

Component: Application Security Manager

Symptoms:
In the GUI, for the Application Security Administrator role, when you create a new ASM policy, the Policy Type is greyed out and the parent policy cannot be created

Conditions:
-- Create user account with the Application Security Administrator user role.
-- Use that account to logon to the GUI and try to create/edit the parent policy.

Impact:
The following actions are restricted to accounts with roles Application Security Administrator:
-- Create/Edit parent policy.
-- Edit Inheritance Settings for parent policy.
-- Clone Policy, selecting policy type is disabled.

Workaround:
There are two possible workarounds:
-- Have the Administrator or Resource Administrator create a parent policy instead of the Application Security Administrator.
-- Create parent policy using tmsh or REST call.

Fix:
The Application Security Administrator role can now create the parent policy when required.


917509-2 : ASM processes some requests longer than usual

Solution Article: K58102101


917469-1 : TMM may crash while processing FPS traffic

Solution Article: K53821711


917005-6 : ISC BIND Vulnerability: CVE-2020-8619

Solution Article: K19807532


916821-1 : An authenticated user on iControlREST may gain elevated privilege level

Component: TMOS

Symptoms:
An authenticated iControl REST user may gain elevated privileges using unspecified means.

Conditions:
iControl REST users with non-admin privileges configured

Impact:
A lower privileged iControl REST user may be able to gain higher privilege using unspecified means

Workaround:
None

Fix:
Privilege levels now properly enforced in iControl REST.


916781-3 : Validation error while attaching DoS profile to GTP virtual

Component: Service Provider

Symptoms:
Validation error is observed while attaching DoS security profile to GPRS Tunneling Protocol (GTP) virtual server.

Conditions:
Attach DoS security profile to GTP virtual server.

Impact:
Validation error. Cannot attach DoS profile to GTP virtual server.

Workaround:
None.

Fix:
Create GTP virtual profile and attach DoS security profile to it. No validation error should be reported.


916753-1 : RESOLV::lookup returns empty string when querying against a local virtual server, and results in possible tmm core

Component: Global Traffic Manager (DNS)

Symptoms:
-- RESOLV::lookup returns an empty string.
-- TMM might crash.

Conditions:
An iRule runs RESOLV::lookup targeting the query toward a local virtual server. For instance:

    RESOLV::lookup @/Common/my_dns_virtual www.example.com

Impact:
RESOLV::lookup does not return the expected result;
tmm might crash. Traffic disrupted while tmm restarts.

Workaround:
In the RESOLV::lookup command, replace the name of the virtual server with its IP address, or the IP address of an external DNS server.

For instance, if /Common/my_dns_virtual has destination 192.0.2.53:53:

instead of this: RESOLV::lookup @/Common/my_dns_virtual
use this: RESOLV::lookup @192.0.2.53


916589-1 : QUIC drops 0RTT packets if CID length changes

Component: Local Traffic Manager

Symptoms:
QUIC sometimes rejects valid 0RTT packets.

Conditions:
-- QUIC enabled.
-- The Connection ID length assigned by the client for the server's CID does not match what the server assigned.

Impact:
QUIC drops 0RTT packets. Lost 0RTT packets increase latency.

Workaround:
None.

Fix:
Fixed an issue with 0RTT packets when using QUIC.


915713-1 : Support QUIC and HTTP3 draft-29

Component: Local Traffic Manager

Symptoms:
The BIG-IP system supports QUIC and HTTP/3 draft-27 and draft-28. IETF has released draft-29.

Conditions:
Browser requests draft-29.

Impact:
Connection downgrades to an older version, or fails if the browser cannot downgrade.

Workaround:
None.

Fix:
The BIG-IP system now supports draft-29 and draft-28, and has removed draft-27 support.


915689-2 : HTTP/2 dynamic header table may fail to identify indexed headers on the response side.

Component: Local Traffic Manager

Symptoms:
Some HTTP/2 response headers may be added to the dynamic header table even if this header is already stored in the table. Instead of subsequent responses using the correct dynamic header table index, these headers may be continually seen as being incrementally indexed.

Conditions:
-- HTTP/2 clientside profile.
-- Concurrent HTTP/2 responses contain headers.

Impact:
Select HTTP/2 response headers may fail to use the dynamic header table index. These headers are incrementally indexed on subsequent responses instead of using the existing table index.

Workaround:
None.

Fix:
HTTP/2 response headers now properly use the dynamic header table index when possible.


915605-2 : Image install fails if iRulesLX is provisioned and /usr mounted read-write

Component: Local Traffic Manager

Symptoms:
If iRulesLX is provisioned the /usr mount points are mounted as read-write. This causes the installation of an image to fail.

tmsh show software status will report the status for the target volume:

Could not access configuration source.

Conditions:
-- iRulesLX is provisioned.
-- The /usr mount points are mounted as read-write.
-- Attempt an installation or upgrade.

Impact:
Unable to upgrade or more generally install an image on a new or existing volume.

Workaround:
Re-mount /usr as read-only:

mount -o remount,ro /usr


915497-1 : New Traffic Class Page shows multiple question marks.

Component: TMOS

Symptoms:
When you navigate to the traffic class creation page by clicking Create button in the Traffic Class list page, Chinese characters are displayed with multiple question marks.

Conditions:
This is encountered when creating a new Traffic Class.

Impact:
Multi-byte characters are displayed incorrectly.

Workaround:
None.

Fix:
Fixed an issue with rendering multi-byte characters on the Traffic Class screen.


915489-3 : LTM Virtual Server Health is not affected by iRule Requests dropped

Component: Anomaly Detection Services

Symptoms:
Virtual Server Health should not take into account deliberate drop requests.

Conditions:
-- DoS profile is attached to Virtual Server.
-- iRule that drops requests on some condition is also attached to the virtual server.

Impact:
Server Health reflects it is overloading status more precisely.

Workaround:
Do not use iRules to drop requests when Behavioral DoS is configured.

Fix:
Virtual Server Health is no longer affected while dropping requests using iRules.


915305-6 : Point-to-point tunnel flows do not refresh connection entries; traffic dropped/discarded

Component: TMOS

Symptoms:
Dynamic routing changes do not cause point-to-point tunnel flows to refresh their connection entries causing tunneled traffic to be dropped/discarded.

Conditions:
Path to a remote tunnel endpoint is provided by a dynamic routing.

Impact:
Tunneled traffic might be dropped/discarded by the BIG-IP system.

Workaround:
Use static routing to provide a path to remote tunnel endpoint.


915281-3 : Do not rearm TCP Keep Alive timer under certain conditions

Component: Local Traffic Manager

Symptoms:
Increased CPU usage due to zombie TCP flows rearming TCP Keep Alive timer continuously and unnecessarily.

Conditions:
-- A large number of zombie flows exists.
-- TCP Keep Alive timer is rearmed aggressively for zombie flows with very small idle_timeout (0) value.
-- TCP Keep alive timer keeps expiring and is rearmed continuously.

Impact:
Continuous rearming results in consuming CPU resources unnecessarily.

Workaround:
None.

Fix:
Rearming of TCP Keep Alive timer is improved.


914761-4 : Crontab backup to save UCS ends with Unexpected Error: UCS saving process failed.

Component: TMOS

Symptoms:
Using crontab to automatically backup UCS file by scheduling cronjobs fails due to SELinux permissions. The failure produces the following error:

Unexpected Error: UCS saving process failed.

Conditions:
This is encountered when 'tmsh save sys ucs' is executed through a cronjob.

Impact:
UCS file is not successfully saved and backup fails.

Workaround:
None.


914681-1 : Value of tmm.quic.log.level can differ between TMSH and GUI

Component: Local Traffic Manager

Symptoms:
The value of the QUIC logging level is erroneously shown as 'Error' in the GUI.

Conditions:
Set tmm.quic.log.level to 'Info' or 'Critical' in TMSH.

Impact:
Misleading log level displayed in the GUI.

Workaround:
Use TMSH to set and view values for tmm.quic.log.level.

Fix:
GUI values for tmm.quic.log.level are now displayed properly.


914649-4 : Support USB redirection through VVC (VMware virtual channel) with BlastX

Component: Access Policy Manager

Symptoms:
USB is unavailable after opening VMware View Desktop.

Conditions:
1. Secure Tunnel disabled on VCS
2. Launch view virtual desktop via native view client from an APM webtop or from the View client

Impact:
USB is unavailable after opening VMware View Desktop

Workaround:
None.

Fix:
USB is now available after opening VMware View Desktop


913757-2 : Error viewing security policy settings for virtual server with FTP Protocol Security

Component: Application Security Manager

Symptoms:
The system reports an error message when trying to navigate to 'Security :: Policies' under virtual server properties:

An error has occurred while trying to process your request.

Conditions:
-- An FTP or SMTP profile with protocol security enabled is attached to a virtual server.
-- Attempt to navigate to 'Security :: Policies'.

Impact:
-- No policies appear. You cannot perform any operations on the 'Security :: Policies' screen.
-- The following error message appears instead:

An error has occurred while trying to process your request.

Workaround:
As long as an FTP or SMTP profile with protocol security enabled is defined under virtual server properties (in another words, it is attached to a virtual server), this issue recurs. There are no true workarounds, but you can avoid the issue by using any of the following:

-- Use another profile, such as HTTP.
-- Set the FTP/SMTP profile under the virtual server settings to None.
-- Remove the profile via the GUI or the CLI (e.g., you can remove the profile from the virtual server in tmsh using this command:

 tmsh modify ltm virtual /Common/test-vs { profiles delete { ftp_security } }

Fix:
You can now attach FTP or SMTP profile with protocol security enabled and navigate to 'Security :: Policies' without error.


913433-2 : On blade failure, some trunked egress traffic is dropped.

Component: TMOS

Symptoms:
When a blade fails, other blades may try to forward traffic using trunked interfaces on the down blade.

Conditions:
-- A multi-blade chassis.
-- Interfaces are trunked.
-- A blade is pulled or powered off.

Impact:
Some traffic is dropped until the failed blade is detected by clusterd (10 seconds by default.)

Workaround:
None.


913373-1 : No connection error after failover with MRF, and no connection mirroring

Component: Service Provider

Symptoms:
-- Unable to establish MRF connection after failover.
-- Error reports 'no connection'.

Conditions:
- MRF configured.
- Using iRule for routing.
-- Failover occurs.

Impact:
Unable to establish new connection until existing sessions time out. No message is reported explaining the circumstances.

Workaround:
Any of the following:
-- Enable connection mirroring on the virtual server.
-- Disable session mirroring.


913249-1 : Restore missing UDP statistics

Component: Local Traffic Manager

Symptoms:
The following UDP statistics are missing:
-- bufdropdgram
-- maxrate_conns
-- maxrate_cur_conns
-- sendbuf_cur_bytes
-- queue_dropped_bytes

Conditions:
Viewing UDP statistics.

Impact:
Unable to view these UDP statistics.

Workaround:
None.

Fix:
The following UDP statistics are now restored:
-- bufdropdgram
-- maxrate_conns
-- maxrate_cur_conns
-- sendbuf_cur_bytes
-- queue_dropped_bytes


913137-2 : No learning suggestion on ASM policies enabled via LTM policy

Component: Application Security Manager

Symptoms:
ASM policy has the option 'Learn only from non-bot traffic' enabled, but the Policy Builder detects that the client is a bot, and therefore does not issue learning suggestions for the traffic.

Conditions:
-- ASM policy is enabled via LTM policy.
-- ASM policy configured to learn only from non-bot traffic.

This applies to complex policies, and in some configurations may happen also when a simple policy is enabled via LTM policy.

Impact:
No learning suggestions.

Workaround:
Disable the option 'Learn only from non-bot traffic' on the ASM policy.

Fix:
Policy builder now classifies non-bot traffic and applies learning suggestions.


912969-1 : iAppsLX Security Hardening

Solution Article: K50343630


910653-6 : iRule parking in clientside/serverside command may cause tmm restart

Component: Local Traffic Manager

Symptoms:
If an iRule utilizing the clientside or serverside command causes parking to occur while in the clientside/serverside command (table or after commands, for example), the connection is aborted while parked, and a subsequent iRule event attempts to run (CLIENT_CLOSED, for example), tmm may restart.

Conditions:
-- iRule using clientside or serverside command.
-- Use of commands that may park while in the clientside/serverside command.
-- Flow is aborted while iRule is parked.
-- iRule also has CLIENT_CLOSED or SERVER_CLOSED event handler.

For more information on the conditions that trigger iRule parking, see K12962: Some iRules commands temporarily suspend iRules processing, available at https://support.f5.com/csp/article/K12962.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
You can use either of the following workarounds:

-- Rework iRules to avoid use of clientside/serverside command.
-- Eliminate parking within the clientside/serverside commands.

Fix:
iRule parking in clientside/serverside command no longer causes tmm to restart.


910521-1 : Support QUIC and HTTP draft-28

Component: Local Traffic Manager

Symptoms:
The BIG-IP system supports QUIC and HTTP/3 draft-25 and draft-27. IETF has released draft-28.

Conditions:
Browser requests draft-28.

Impact:
Connection downgrades to an older version, or fails if the browser cannot downgrade.

Workaround:
None.

Fix:
The BIG-IP system now supports draft-28 and draft-27, and has removed draft-25 support.


910253-3 : BD error on HTTP response after upgrade

Component: Application Security Manager

Symptoms:
After upgrade, some requests can cause BD errors on response:

BEM|ERR |May 19 17:49:55.800|0983|response_header_accumulator.c:0200|Error: CookieMgrBuildCookie failed. ans 1 job 2957561040

IO_PLUGIN|ERR |May 19 17:49:55.800|0983|io_plugin.c:3320|TMEVT_RESPONSE: Cannot build a ts cookie.

Conditions:
-- Upgrading BIG-IP systems to v15.0.0 or later from versions earlier than v15.0.0.
-- ASM policy is configured on a virtual server.

Impact:
For some requests, the response can arrive truncated or not arrive at all.

Workaround:
Add an iRule that deletes ASM cookies:

when HTTP_REQUEST {
  set cookies [HTTP::cookie names]
  foreach aCookie $cookies {
    if {$aCookie matches_regex {^TS(?:[0-9a-fA-F]{6,8})(?:$|_[0-9]+$)}} {
      HTTP::cookie remove $aCookie
    }
  }
}

Note: Performing this workaround affects cookie-related violations (they may need to be disabled to use this workaround), session, and login protection.


910201-4 : OSPF - SPF/IA calculation scheduling might get stuck infinitely

Component: TMOS

Symptoms:
After SPF/IA calculation gets suspended, it might enter a state where it never fires again.

Conditions:
SPF/IA calculation gets suspended;

This occurs for various reasons; BIG-IP end users have no influence on it occurring.

Impact:
OSPF routes are visible in the OSPF database, but not installed in the routing table.

Workaround:
Restart the routing daemons:
# bigstart restart tmrouted

Running this command allows you to recover from this situation, but does not prevent the event from reoccurring.

If due to a topology, SPF/IA calculation suspension occurs again after a restart, this workaround essentially has no effect.


910097-4 : Changing per-request policy while tmm is under traffic load may drop heartbeats

Component: Access Policy Manager

Symptoms:
Cluster failover, tmm restart, and tmm killed due to missed heartbeats. tmm crash

Conditions:
TMM is under load due to heavy traffic while MCP attempts to configure per-request policy. This can be caused by a modification to the policy or one of its agents, or by a restart of the TMM.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
When making changes to per-request policies, use a scheduled maintenance window so that impact to traffic is minimized.


910017-1 : Security hardening for the TMUI Interface page

Solution Article: K21540525


909197-2 : The mcpd process may become unresponsive

Component: TMOS

Symptoms:
-- The mcpd process is killed with SIGABRT by the sod watchdog due to failed heartbeat check.
-- There is high memory usage by the mcpd process prior to getting killed.
-- There is an mcpd core file contains a very long string. The core might contain a repeating pattern of '{ } { } { } ...'.

Conditions:
The mcpd process receives a malformed message from one of the control plane daemons.

Impact:
-- There is a temporary lack of responsiveness related to actions of inspecting and/or modifying system configuration: GUI, TMSH, etc., operations may fail or time out.
-- SNMP queries might go unanswered.
-- System daemons restart.
-- Traffic disrupted while mcpd restarts.

Workaround:
None.

Fix:
Fixed handling of malformed messages by mcpd, so the problem should no longer occur.


908673-6 : TMM may crash while processing DNS traffic

Solution Article: K43850230


908517-4 : LDAP authenticating failures seen because of 'Too many open file handles at client (nslcd)'

Component: TMOS

Symptoms:
LDAP authentication fails with an error message:

err nslcd[2867]: accept() failed: Too many open files

Conditions:
This problem occurs when user-template is used instead of Bind DN.

Impact:
You cannot logon to the system using LDAP authentication.

Workaround:
None.

Fix:
LDAP authentication now succeeds when user-template is used.


908065-1 : Logrotation for /var/log/avr blocked by files with .1 suffix

Component: Application Visibility and Reporting

Symptoms:
AVR logrotate reports errors in /var/log/avr:

error: error creating output file /var/log/avr/avrd.log.1: File exists
/var/log/avr/avrd.log will remain unchanged
/var/log/avr/avrd.log.1 will remain unchanged

Conditions:
Files ending with .1 exist in the log directory.

Impact:
Logrotate does not work. This might fill the disk with logs over time.

Workaround:
Remove or rename all of the .1 log files.

Fix:
Fixed an issue with logrotate failing when files ending with .1 exist in the log directory.


906889-2 : Incorrect totals for New Flows under Security :: Debug :: Flow Inspector :: Get Flows.

Component: TMOS

Symptoms:
Incorrect totals for New Flows under Security :: Debug :: Flow Inspector :: Get Flows.

Conditions:
Viewing New Flows under Security :: Debug :: Flow Inspector :: Get Flows.

Impact:
Calculation mistake in the GUI: shows 8 times the actual values, for example:

  Packets In 2 shows as 016 in the GUI
  Packets Out 0 shows as 8 in the GUI

Workaround:
View statistics in tmsh.


905125-1 : Security hardening for APM Webtop

Solution Article: K30343902


904845-1 : VMware guest OS customization works only partially in a dual stack environment.

Component: TMOS

Symptoms:
The result of guest OS customization depends on the DHCP state on the management (mgmt) interface and the applied customization profile (i.e., IPv4 only, IPv4 and IPv6, or IPv6 with IPv4 prompt).

By default, DHCP is enabled on the management interface.

During configuration, you can customize only one IPv4 or one IPv6 address in a dual stack environment.

Conditions:
Applying a customization profile to VMware VM in a dual stack environment.

Impact:
You can only partially customize the mgmt interface IP profiles for VMware VMs in a dual stack environment.

Workaround:
Configure the mgmt interface addresses using the config script.

Fix:
VMware customization works only partially in a dual stack environment. To avoid misconfiguration, set the desired mgmt interface addresses using the config script.


904785-2 : Remotely authenticated users may experience difficulty logging in over the serial console

Component: TMOS

Symptoms:
-- When a remotely authenticated user attempts login over the serial console, the username and password are accepted, but the session closes immediately thereafter.
-- Login over SSH is successful for the same user

Conditions:
-- Remote authentication (e.g., RADIUS, TACACS, LDAP) and role mapping configured on the BIG-IP system.
-- Attempted login over the serial console for a remotely authenticated user who has been assigned a role.

Impact:
Remotely authenticated users cannot log in over the serial console.

Workaround:
Using either of the following workaround:

-- Log in over SSH instead

-- If acceptable (taking into account security considerations), enable terminal access for all remote users regardless of assigned role, using 'tmsh modify auth remote-user remote-console-access tmsh' or within the GUI.


904705-1 : Cannot clone Azure marketplace instances.

Component: TMOS

Symptoms:
Cannot clone Azure marketplace instances because cloned instances do not properly retrieve publisher and product code from the metadata service.

Conditions:
Applies to any Azure marketplace instance.

Impact:
Cannot clone Azure marketplace instances.

Workaround:
None.

Fix:
Updated the version of the API used to get data from the metadata service. Cloned instances now properly retrieve the publisher and product code from the metadata service.


904373-4 : MRF GenericMessage: Implement limit to message queues size

Component: Service Provider

Symptoms:
The GenericMessage filter does not have a configurable limit to the number of messages that can be received.

Conditions:
If a message is waiting for an asynchronous iRule operation during a GENERICMESSAGE_INGRESS or GENERICMESSAGE_EGRESS iRule event, new messages are placed in either the ingress or egress queue. As the number of messages increase, more memory is required.

Impact:
If too many messages are queued, the system may exceed an internal count which could lead to a core.

Workaround:
None.

Fix:
The existing max_pending_messages attribute of the message router profile is used to limit the size of the queues.


904053-1 : Unable to set ASM Main Cookie/Domain Cookie hashing to Never

Component: Application Security Manager

Symptoms:
Disabling ASM Main Cookie/Domain Cookie hashing in a Policy's Learning and Blocking Setting with 'Never (wildcard only)' does not stop the ASM Main Cookie from continuing to hash server-provided cookies.

Conditions:
-- ASM enabled.
-- Learning mode enabled for Policy.
-- Learn New Cookies set to 'Never (wildcard only)' instead of default 'Selective'.

Impact:
A sufficient number of ASM Main Cookies and/or a sufficiently large number of cookies for each ASM Main cookie to hash can result in the HTTP header becoming prohibitively large, causing traffic to be refused by the server.

Workaround:
Disable Learning mode for the Policy disables Cookie hashing.

Note: This affects all learning, not just Cookie hashing.

Fix:
Cookie hashing can now be disabled at the policy level in the Cookie subsection of an ASM Policy's Learning and Blocking Settings by setting Learn New Cookies to "Never (wildcard only)".


903357-4 : Bot defense Profile list is loads too slow when there are 750 or more Virtual servers

Component: Application Security Manager

Symptoms:
Security :: Bot Defense : Bot Defense Profiles page loading takes a long time when there are profiles configured with hundreds of virtual servers. For example: a configuration with 750 virtual servers takes about 40 seconds to load the page. Configuration with 1300 virtual servers takes more than 70 seconds.

Conditions:
At least one Bot profile attached to hundreds of virtual servers. For 750 and more virtual servers attached the slow loading is significant.

Impact:
Bot Defense list page loading time can take more than 30 seconds.

Workaround:
None.


902485-5 : Incorrect pool member concurrent connection value

Component: Application Visibility and Reporting

Symptoms:
In AVR pool-traffic report, 'server-concurrent-conns' reports a larger value than 'server-max-concurrent-conns'.

Conditions:
This is encountered when viewing the pool-traffic report.

Impact:
Incorrect stats reported in the pool-traffic report table

Workaround:
In /etc/avr/monpd/monp_tmstat_pool_traffic_measures.cfg, change the formula of server_concurrent_connections:

From this:
formula=round(sum(server_concurrent_conns),2)

Change it to this:
formula=round(sum(server_concurrent_conns)/count(distinct time_stamp),2)

Fix:
Changed the calculation formula of 'server-concurrent-conns' so it reports the correct statistics.


902417-6 : Configuration error caused by Drafts folder in a deleted custom partition

Component: TMOS

Symptoms:
Error during config load due to custom partition associated Draft folder exists after deleting partition.

01070734:3: Configuration error: Can't associate folder (/User/Drafts) folder does not exist
Unexpected Error: Loading configuration process failed.

Conditions:
Create draft policy under custom partition

Impact:
Impacts the software upgrade.

Workaround:
Remove the Draft folder config from bigip_base.conf or use command "tmsh delete sys folder /User/Drafts" followed by "tmsh save sys config" after removing partition.


902401 : OSPFd SIGSEGV core when 'ospf clear' is done on remote device

Component: TMOS

Symptoms:
The ospfd process generates a core.

Conditions:
-- IA routes.
-- OSPF is in FULL/DR state.

Impact:
An OSPF daemon generates a core, potentially losing routing information and OSPF dynamic routes for a moment while the ospfd daemon restarts.

Workaround:
None.

Fix:
OSPF no longer cores when running 'clear ip ospf' on remote.


901929-1 : GARPs not sent on virtual server creation

Component: Local Traffic Manager

Symptoms:
When a virtual server is created, GARPs are not sent out.

Conditions:
-- Creating a new virtual server.

Impact:
Traffic could be impacted if other systems have the virtual server address already in their ARP caches.

Workaround:
After creating the virtual server, disable and re-enable the ARP setting on the corresponding virtual address.

Fix:
GARPs are now sent when a virtual server is created.


901061-1 : Safari browser might be blocked when using Bot Defense profile and related domains.

Component: Application Security Manager

Symptoms:
As a fix to ID879777 (https://cdn.f5.com/product/bugtracker/ID879777.html), when navigating to a related domain using Safari, requests might be blocked.

Conditions:
- Using Bot Defense profile, with "Cross Domain Requests" mode "Validate Upon Request"
- BIG-IP version containing fix of ID879777 (16.0 and higher or EngHF)
- Surfing the site using Safari browser.

Impact:
Some requests might be blocked.

Workaround:
None.

Fix:
Set the cookie so all requests in the target domain will contain it.


900797-1 : Brute Force Protection (BFP) hash table entry cleanup

Component: Application Security Manager

Symptoms:
Brute Force Protection (BFP) uses a hash table to store counters of failed logins per IPs and usernames.
There is a separate hash table for each virtual server.
When the hash table is fully utilized and new entries need to be added, the LRU entry is being removed.
This scenario may cause mitigated entries to keep getting removed from the hash table by new entries.

Conditions:
There is a separate hash table for each virtual server, and its size is controlled by the external_entity_hash_size internal parameter.
When it is set to 0, the size is determined automatically based on system memory.
Otherwise, it is the maximum size of the hash tables together, then divided into the number of virtual servers which have traffic and BFP enabled.
In case of the latter, there might be a chance that with too many virual servers the hash table may reach it's maximum capacity.

Impact:
Mitigated entries that keep getting removed from the hash table by new entries, may result in attacks not getting mitigated.

Workaround:
N/A

Fix:
Mitigated entries are kept in the hash table.


900793-4 : APM Brute Force Protection resources do not scale automatically

Solution Article: K32055534

Component: Application Security Manager

Symptoms:
Under certain conditions, resources for Brute Force Protection must be manually scaled by administrators to provide full protection.

Conditions:
-- Many virtual server (hundreds) that have web application protection with brute force protection enabled.
-- Numerous failed login requests coming to all virtual servers all the time.

Impact:
Administrators must manually change the hash size upon need instead of relying on the automatic configuration.

Workaround:
Set the internal parameter external_entity_hash_size to 0 to allow automatic recalculation of the correct value.

Fix:
Brute Force Protection resources are now scaled automatically based on available system resources.


900789-1 : Alert before Brute Force Protection (BFP) hash are fully utilized

Component: Application Security Manager

Symptoms:
Brute Force Protection (BFP) uses a hash table to store counters of failed logins per IP addresses and usernames. There is a separate hash table for each virtual server. When the hash table is fully utilized and new entries need to be added, the LRU entry is being removed without logging a warning.

Conditions:
This can be encountered when Brute Force Protection is enabled and the hash table reaches its maximum capacity.

Impact:
No alert is sent when entries are evicted.

Workaround:
None.

Fix:
Alert/Warning is now announced in ASM logs, describing the status of the hash table.


898997-1 : GTP profile and GTP::parse iRules do not support information element larger than 2048 bytes

Component: Service Provider

Symptoms:
GTP message parsing fails and log maybe observed as below:

GTP:../modules/hudfilter/gtp/gtp_parser.c::242 (Failing here. ).
GTP:../modules/hudfilter/gtp/gtp_parser_ver_2.c::153 (Failing here. ).
GTP:../modules/hudfilter/gtp/gtp_parser.c::103 (Failing here).

Conditions:
- GTP profile is applied to virtual or GTP::parse command is used
- GTP message contains IE (information element) which is larger than 2048 bytes

Impact:
- message parsing fails, traffic maybe interupted

Fix:
GTP profile and GTP::parse iRules now support IE larger than 2048 bytes


898949-6 : APM may consume excessive resources while processing VPN traffic

Solution Article: K04518313


898705-6 : IPv6 static BFD configuration is truncated or missing

Component: TMOS

Symptoms:
-- When an IPv6 address used in the command 'ipv6 static <addr> <gateway> fall-over bfd' exceeds 19 characters, it gets truncated.

-- IPv6 static BFD configuration entries go missing during a daemon restart.

Conditions:
IPv6 static BFD configuration.

Impact:
The IPv6 static BFD configuration does not persist during reloads.

-- The long IPv6 addresses get truncated.
-- The configuration is removed upon daemon restart.

Workaround:
None.


898461-1 : Several SCTP commands unavailable for some MRF iRule events :: 'command is not valid in current event context'

Component: TMOS

Symptoms:
The following SCTP iRule commands:

-- SCTP::mss
-- SCTP::ppi
-- SCTP::collect
-- SCTP::respond
-- SCTP::client_port
-- SCTP::server_port

Are unavailable in the following MRF iRule events:

-- GENERICMESSAGE_EGRESS
-- GENERICMESSAGE_INGRESS
-- MR_EGRESS
-- MR_INGRESS

Attempts to use these commands in these events result in errors similar to:

01070151:3: Rule [/Common/sctp_TC] error: /Common/sctp1: error: [command is not valid in current event context (GENERICMESSAGE_EGRESS)][SCTP::ppi 46].

Conditions:
-- Using MRF and SCTP.
-- Using the specified set of iRule commands within the listed iRule events.

Impact:
Unable to use these iRule commands within these iRule events.

Workaround:
None.

Fix:
These iRule commands are now available within these iRule events.


896861-1 : PTR query enhancement for RESOLVER::name_lookup

Component: Global Traffic Manager (DNS)

Symptoms:
Currently RESOLVER::name_lookup does not have PTR reverse domain mapping.

Conditions:
RESOLVER::name_lookup needs an additional iRule to make PTR query work

Impact:
Need an additional iRule to convert to reverse IP PTR query to work

Workaround:
Use an iRule to convert ip address reverse mapping

Fix:
Address IP address reverse mapping for PTR query


896817-1 : iRule priorities error may be seen when merging a configuration using the TMSH 'replace' verb

Component: TMOS

Symptoms:
When merging a configuration that modifies the list of iRules a virtual server uses, you may encounter an error similar to:

01070621:3: Rule priorities for virtual server (/Common/virtual1) must be unique.

Conditions:
-- Merging a configuration using the TMSH 'replace' verb.
-- Replacing a virtual server's iRule in a way that adjusts priorities of the iRules.

Impact:
Unable to replace configuration using TMSH's 'replace' verb.

Workaround:
None.

Fix:
When merging a configuration that modifies the list of iRules a virtual server uses using the TMSH 'replace' verb, no error is encountered.


896709-4 : Add support for Restart Desktop for webtop in VMware VDI

Component: Access Policy Manager

Symptoms:
VMware has a restart desktop option to reboot the Horizon Agents, but APM does not support this feature on the webtop.

Conditions:
You wish to use the VMware Restart desktop feature for the Horizon Agents that are managed by the vCenter Server.

Impact:
Cannot restart the desktop (Horizon Agent) from the webtop by clicking the restart icon.

Workaround:
None.

Fix:
APM now supports restart desktop option on webtop for VMware VDI.


896285-1 : No parent entity in suggestion to add predefined-filetype as allowed filetype

Component: Application Security Manager

Symptoms:
No parent entity appears in an ASM Policy Builder suggestion to add to the policy a predefined-filetype to the allowed filetypes list.

Conditions:
The issue is encountered when filetypes are configured with learning mode which allows new filetypes to be added to the policy. Relevant learning modes to this issue are: Always, Selective and Compact.

Impact:
No parent entity appears in the sugestion.

Workaround:
None.

Fix:
Suggestions to add filetypes to the allowed-filetypes list in the policy now contain parent entity.


896217-1 : BIG-IP GUI unresponsive

Component: TMOS

Symptoms:
When you try to log into the GUI via the management IP, you see only a single gray bar displayed in the middle of the window.

Conditions:
-- A GUI session expired while you were logged on.
-- The partition on which the GUI session expires is deleted.
-- You log on again.

Impact:
GUI becomes unresponsive.

Workaround:
Restart tomcat via SSH:
# bigstart restart tomcat


895837-4 : Mcpd crash when a traffic-matching-criteria destination-port-list is modified

Component: TMOS

Symptoms:
Virtual server configured with:

-- Destination address in a non-default route-domain, for example:
0.0.0.0%100/0

-- The configuration uses a destination port list.

Conditions:
Modify the virtual server's port-list to a different one.

Impact:
Mcpd generates a core, and causes services to restart and failover.

Workaround:
None.

Fix:
Mcpd no longer crashes when modifying a traffic-matching-criteria's destination port list.


893061-4 : Out of memory for restjavad

Component: Application Security Manager

Symptoms:
REST framework not available due to Out of memory error

Conditions:
Long list of Live Update installations

Impact:
Live Update GUI is not responding.

Workaround:
1) Increase memory assigned to the Linux host: (value dependant on platform)

# tmsh modify sys db provision.extramb value 1000

2) Allow restjavad to access the extra memory:

# tmsh modify sys db restjavad.useextramb value true

3) Save the config:

# tmsh save sys config

4) The re-provisioning will trigger a restart of the services. Wait until the unit is online again.

5) Increase the restjavad maxMessageBodySize property:

# curl -s -f -u admin: -H "Content-Type: application/json" -d '{"maxMessageBodySize":134217728}' -X POST http://localhost:8100/mgmt/shared/server/messaging/settings/8100 | jq .
{
  "maxMessageBodySize": 134217728,
  "localhostRestnodedConnectionLimit": 8,
  "defaultEventHandlerTimeoutInSeconds": 60,
  "minEventHandlerTimeoutInSeconds": 15,
  "maxEventHandlerTimeoutInSeconds": 60,
  "maxActiveLoginTokensPerUser": 100,
  "generation": 6,
  "lastUpdateMicros": 1558012004824502,
  "kind": "shared:server:messaging:settings:8100:restservermessagingpoststate",
  "selfLink": "https://localhost/mgmt/shared/server/messaging/settings/8100"
}

Ensure the command returns output showing the limit has been increased (as shown above).

6) Reboot the unit.


892941-1 : F5 SSL Orchestrator may fail to stop an attacker from exfiltrating data on a compromised client system (SNIcat)

Solution Article: K20105555

Component: Local Traffic Manager

Symptoms:
https://support.f5.com/csp/article/K20105555

Conditions:
https://support.f5.com/csp/article/K20105555

Impact:
https://support.f5.com/csp/article/K20105555

Workaround:
https://support.f5.com/csp/article/K20105555

Fix:
https://support.f5.com/csp/article/K20105555


892937-1 : F5 SSL Orchestrator may fail to stop an attacker from exfiltrating data on a compromised client system (SNIcat)

Solution Article: K20105555

Component: Access Policy Manager

Symptoms:
https://support.f5.com/csp/article/K20105555

Conditions:
https://support.f5.com/csp/article/K20105555

Impact:
https://support.f5.com/csp/article/K20105555

Workaround:
https://support.f5.com/csp/article/K20105555

Fix:
https://support.f5.com/csp/article/K20105555


892677-6 : Loading config file with imish adds the newline character

Component: TMOS

Symptoms:
While loading configuration from the file with IMISH ('imish -f <f_name>'), the newline character gets copied at the end of each line which causes problems with commands containing regex expressions.

In particular, this affects the bigip_imish_config Ansible module.

Conditions:
Loading a config with 'imish -f <f_name>' commands.

Note: This command is used with the bigip_imish_config Ansible module.

Impact:
Regex expressions are not created properly.

Workaround:
You can use either of the following workarounds:

-- Delete and re-add the offending commands using the imish interactive shell.

-- Restart tmrouted:
bigstart restart tmrouted


892653-4 : Unable to define Maximum Query String Size and Maximum Request Size fields for Splunk Logging Format in the GUI

Component: Application Security Manager

Symptoms:
You are unable to define Maximum Query String Size and Maximum Request Size fields for Splunk Logging Format in the GUI.

Conditions:
This is encountered when configuring the Splunk Logging Format in the GUI

Impact:
You are unable to define Maximum Query String Size and Maximum Request Size fields for Splunk Logging Format in the GUI.

Workaround:
Use tmsh to define the maximum query string size and maximum request size. For more information, see the tmsh command reference for the security log profile at https://clouddocs.f5.com/cli/tmsh-reference/v14/modules/security/security-log-profile.html

Fix:
Maximum Query String Size and Maximum Request Size fields will be shown in the GUI in case the Splunk Logging Format is selected.


892385-5 : HTTP does not process WebSocket payload when received with server HTTP response

Component: Local Traffic Manager

Symptoms:
WebSocket connection hangs on the clientside if the serverside WebSocket payload is small and received in the same TCP packet with server HTTP response.

Conditions:
-- Virtual contains HTTP and WebSocket filters.
-- HTTP response and a small WebSocket payload is received in the same TCP packet from the server.
-- Small WebSocket payload is not delivered on the clientside.

Impact:
-- WebSocket connection hangs.

Workaround:
None.

Fix:
HTTP processes WebSocket payload without delay when payload is received with server HTTP response.


891729-1 : Errors in datasyncd.log

Component: Fraud Protection Services

Symptoms:
An error exists in datasyncd.log:
DATASYNCD|ERR |Mar 13 12:47:54.079|16301| datasyncd_main.c:1955|tbl_gen_state_machine: cannot start the generator for table CS_FPM

Conditions:
Upgrades from version 13.x to 14.0.0 or higher.

Impact:
FPS has a maximum of ~990 rows instead of 1001, and there are errors in datasyncd.log. However, the upgrade completes normally, and the system operates as expected.

Workaround:
These are benign error messages that you can safely ignore. Upgrade completes successfully, and the system operates as expected.

If you prefer, however, you can perform a clean install instead instead of upgrading. This has an impact on your configuration, as that information will be lost when you do a clean install.

Fix:
Now the max rows number is 1001 when upgrading from any version prior to 14.0.0.


891457-1 : NIC driver may fail while transmitting data

Solution Article: K75111593


891385-1 : Add support for URI protocol type "urn" in MRF SIP load balancing

Component: Service Provider

Symptoms:
MRF SIP load balancing does not support the urn URI protocol type.

Conditions:
-- Using MRF SIP in LB mode.
-- Clients are using the urn protocol type in their URIs.

Impact:
SIP messages with urn URIs are rejected.

Fix:
Added support for the urn URI protocol type.


891093-2 : iqsyncer does not handle stale pidfile

Component: Global Traffic Manager (DNS)

Symptoms:
Stale /var/run/iqsyncer.pid file is causing a new iqsyncer application to exit immediately after start.

Conditions:
iqsyncer applications is killed by Linux kernel or any other reason causing a stale iqsyncer pid file

Impact:
Gtm config changes and gtm_add operations are blocked

Workaround:
Remove iqsyncer pid file manually or reboot

Fix:
Stale iqsyncer pid file condition handled in iqsyncer application


890277-4 : Full config sync to a device group operation takes a long time when there are a large number of partitions.

Component: TMOS

Symptoms:
When a full config sync is done to a device group with large number of partitions:
-- The config sync operation takes a long time to complete.
-- There is a spike in CPU usage on the device where config push is initiated.
-- The mcpd daemon is unresponsive to other daemons, such tmsh, GUI etc., as it is busy pushing the config sync.
-- iQuery connections are terminated due to high CPU utilization.

Conditions:
Full config sync on device with large number of partitions.

Impact:
The operation takes a long time to complete, minutes on a BIG-IP Virtual Edition (VE) configurations, and varies by platform and the size of the configuration. For example, config sync on a medium BIG-IP VE setup running v15.1.0.1 with 512 partitions takes ~3 minutes.

Impedes management of device as well as terminates iQuery connections to GTM/DNS devices.

Workaround:
Enable Manual Incremental Sync.


889557 : jQuery Vulnerability CVE-2019-11358

Solution Article: K20455158


889041-4 : Failover scripts fail to access resolv.conf due to permission issues

Component: TMOS

Symptoms:
When a failover is triggered, the floating IP addresses do not migrate to the newly active device. In /var/log/auditd/audit.log, you see the following errors:

/var/log/auditd/audit.log:type=AVC msg=audit(1583426470.463:27492): avc: denied { read } for pid=26865 comm="curl" name="resolv.conf" dev="dm-5" ino=32804 scontext=system_u:system_r:f5config_failover_t:s0 tcontext=system_u:object_r:net_conf_t:s0 tclass=lnk_file

Conditions:
-- A failover event occurs.
-- oci-curl will be called when failover happens, which may be unable to read /etc/resolv.conf.

Impact:
Failover does not complete. Floating IP addresses do not move to the active device.

Workaround:
Run two commands:
tmsh modify sys db failover.selinuxallowscripts enable
setenforce 0

Impact of workaround: these commands disable SELinux policy enforcement.


888497-1 : Cacheable HTTP Response

Component: TMOS

Symptoms:
JSESSIONID, BIGIPAUTHCOOKIE, BIGIPAUTH can be seen in the browser's debugging page.

Conditions:
-- Accessing the BIG-IP system using the GUI.
-- Viewing the browser's stored cache information.

Impact:
HTTPS session information is captured/seen in the browser's local cache, cookie.

Note: The BIG-IP system does not display and/or return sensitive data in the TMUI. Content that is marked appropriately as sensitive is never returned, so it is never cached. Data that is cached for TMUI in the client browser session is not considered secret.

Workaround:
Disable caching in browsers.


888417-6 : Apache Vulnerability: CVE-2020-8840

Solution Article: K15320518


886689-7 : Generic Message profile cannot be used in SCTP virtual

Component: TMOS

Symptoms:
When creating virtual server or transport config containing both SCTP and Generic Message profile, it will fail with an error:

01070734:3: Configuration error: Profile(s) found on /Common/example_virtual that are not allowed: Only (TCP Profile, SCTP Profile, DIAMETER Profile, Diameter Session Profile, Diameter Router Profile, Diameter Endpoint, SIP Profile, SIP Session Profile, SIP Router Profile, DoS Profile, profile statistics)

Conditions:
Create virtual server or transport config which contains both SCTP and Generic Message profile.

Impact:
You are unable to combine the Generic Message profile with the SCTP profile.

Fix:
Generic Message profile can be used in SCTP virtual


882189-1 : BIG-IP Edge Client for Windows vulnerability CVE-2020-5897

Solution Article: K20346072


882185-1 : BIG-IP Edge Client Windows ActiveX

Solution Article: K20346072


881445-8 : BIG-IP Edge Client for Windows vulnerability CVE-2020-5898

Solution Article: K69154630


881317-7 : BIG-IP Edge Client for Windows vulnerability CVE-2020-5896

Solution Article: K15478554


881293-1 : BIG-IP Edge Client for Windows vulnerability CVE-2020-5896

Solution Article: K15478554


880625-4 : Check-host-attr enabled in LDAP system-auth creates unusable config

Component: TMOS

Symptoms:
When configuring system auth to use LDAP, if you set check-host-attr to enabled, the resulting /config/bigip/pam.d/ldap/system-auth.conf that is generated cannot be parsed by nslcd.

Conditions:
-- Configuring system auth to use LDAP.
-- Setting check-host-attr to enabled.

Impact:
LDAP-based auth does not function.

Workaround:
None.


880361-7 : TMM may crash while processing iRules LX commands

Component: Local Traffic Manager

Symptoms:
Under certain conditions, TMM may crash while processing iRules LX commands

Conditions:
-iRules LX in use

Impact:
TMM crash, leading to a failover event.

Workaround:
None.

Fix:
TMM now processes iRules LX commands as expected.


880165-3 : Auto classification signature update fails

Component: TMOS

Symptoms:
During classification update, you get an error:

"Error: Exception caught in script. Check logs (/var/log/hitless_upgrade.log) for details"

An additional diagnostic is that running the command "/usr/bin/crt_cache_path" reports "none".

Conditions:
This is encountered while updating the classification signatures or the protocol inspection updates.

It can occur when something goes wrong during license activation, but license activation ultimately succeeds.

Impact:
When this issue occurs, auto classification signature update will fail.

Workaround:
You may be able to recover by re-activating the BIG-IP license via tmsh.


879745-6 : TMM may crash while processing Diameter traffic

Solution Article: K82530456


879413-7 : Statsd fails to start if one or more of its *.info files becomes corrupted

Component: Local Traffic Manager

Symptoms:
If one of the *.info files in /var/rrd becomes corrupted, statsd fails to load it and ends up restarting continuously. You see the following messages in /var/log/ltm:

-- err statsd[766]: 011b020b:3: Error 'Success' scanning buffer '' from file '/var/rrd/throughput.info'.
-- err statsd[766]: 011b0826:3: Cluster collection start error.Exitting.

Conditions:
Corrupted *.info file in /var/rrd.

Impact:
Stats are no longer accurate.

Workaround:
It might take multiple attempts to repair the *.info files. You might have to run the following command several times for different .info files, where <filename> is the actual name of the file (e.g., 'throughput.info'):

found=0;while [ $found != 1 ]; do filetype=`file throughput.info | cut -d " " -f2`;if [[ $filetype != "ASCII" ]]; then rm -f <filename>.info; else grep CRC <filename>.info;found=1;fi; done

Fix:
The system now detects corrupt *.info files and deletes and recreates them.


879405-3 : Incorrect value in Transparent Nexthop property

Component: TMOS

Symptoms:
Incorrect value in Transparent Nexthop property on virtual server page with assigned VLAN.

Conditions:
-- Virtual server configured with with transparent next-hop bychecking 'Transparent Nexthop' in the GUI on the LTM Virtual Server page: Transparent Nexthop = None

   Works fine with:

Impact:
Incorrect value shown in Transparent Nexthop property field.

Workaround:
Use tmsh to complete the action successfully.


877109-8 : Unspecified input can break intended functionality in iHealth proxy

Component: TMOS

Symptoms:
Unspecified input can break intended functionality in iHealth proxy

Impact:
iHealth proxy functionality will not work as intended

Workaround:
None

Fix:
iHealth proxy functions as expected


876953-1 : Tmm crash while passing diameter traffic

Component: Service Provider

Symptoms:
Tmm crashes with the following log message.

-- crit tmm1[11661]: 01010289:2: Oops @ 0x2a3f440:205: msg->ref > 0.

Conditions:
This can be encountered while passing diameter traffic when one or more of the pool members goes down and retransmissions occur.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.

Fix:
Fixed a tmm crash while passing diameter traffic.


876805-4 : Modifying address-list resets the route advertisement on virtual servers.

Component: TMOS

Symptoms:
If you modify an address list associated with a virtual server, any modifications done to virtual addresses are lost when the address list is modified.

Conditions:
This occurs in the following scenario:
-- Create an address list.
-- Assign it to a Virtual Server.
-- Modify some or all of virtual addresses.
-- Modify the address list.

Impact:
Modifications made to virtual addresses are lost.

Workaround:
None.

Fix:
Virtual address properties are now preserved when an address list is modified.


876581-1 : JavaScript engine file is empty if the original HTML page cached for too long

Component: Fraud Protection Services

Symptoms:
JavaScript engine file is empty.

Conditions:
Original HTML page with FPS injected content is cached for too long due to some caching headers (e.g., ETag), so the JavaScript engine link becomes invalid.

Impact:
No FPS protection for that HTML page.

Workaround:
You can use either workaround:

-- Use an iRule to disable caching for protected HTML pages.

-- Set caching time for protected HTML pages to the same value as the datasync tables regeneration timer according to the active datasync profile (default value is two 2 days).

Fix:
FPS now also removes ETag headers from protected HTML pages.


876353-2 : iRule command RESOLV::lookup may cause TMM to crash

Solution Article: K03125360


874677-4 : Traffic Classification auto signature update fails from GUI

Component: Traffic Classification Engine

Symptoms:
Beginning in BIG-IP software v14.1.0, Traffic Classification auto signature update fails when performed using the GUI.

The system reports an error:
Error: Exception caught in the script. Check logs (/var/log/hitless_upgrade.log) for details.

Conditions:
Performing Traffic Classification auto signature update using the GUI.

Impact:
Fails to update the classification signature automatically.

Workaround:
You can use either of the following:

-- Perform Traffic Classification auto signature update operations from the CLI.
-- Use the GUI to manually update Traffic Classification signatures.

Fix:
Fixed the hitless upgrade script to download the IM packages from the EDSM server for point releases.


871561-6 : Software installation on vCMP guest fails with '(Software compatibility tests failed.)' or '(The requested product/version/build is not in the media.)'

Component: TMOS

Symptoms:
Software upgrades on a vCMP guest might fail with log messages in /var/log/ltm similar to:

info lind[5500]: 013c0007:6: Install complete for volume=HD1.2: status=failed (Software compatibility tests failed.)

info lind[5500]: 013c0007:6: Install complete for volume=HD1.2: status=failed (The requested product/version/build is not in the media.)

Conditions:
Performing a software upgrade on a vCMP guest, when the software images are present on the vCMP hypervisor.

Impact:
Unable to perform software installations.

Workaround:
Option 1:
Make sure that the .iso files for both base image and engineering hotfix reside only on a vCMP guest before starting the installation.

Option 2:
Even if the engineering hotfix installation has failed, the base image should still have been installed properly, so you can restart the vCMP guest and perform a hotfix installation on top of already installed base image.

Option 3:
Even if the engineering hotfix installation has failed, the base image should still have been installed properly. Ensure there is copy of the hotfix locally within the vcmp Guest. Then restart the lind service

  tmsh restart sys service lind

The hotfix installation should begin again this time using the hotfix from within the guest /shared/images/ location.

Option 4:
Manually eject the CD from the vCMP guest's virtual CD drive, and then restart lind:

1. Confirm the wrong ISO image is still locked (inserted in the CD drive):

  isoinfo -d -i /dev/cdrom

Note: Pay attention to the volume id in the output
From within the vCMP guest

2. Unlock (eject) the image:

  eject -r -F /dev/cdrom && vcmphc_tool -e

3. Verify the CD drive is now empty:

  isoinfo -d -i /dev/cdrom

The output should report an error that includes:

<…> Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 <…>

4. Restart lind:

  tmsh restart sys service lind


865177-5 : Cert-LDAP returning only first entry in the sequence that matches san-other oid

Component: TMOS

Symptoms:
Certificate-ldap only returns the first matching oid from the certificate file even though multiple matching san-other entries exists

Conditions:
When Certificate-ladp attribute ssl-cname-field set to san-other and certificate with multiple san-other oids

Impact:
Only the first matching oid is returned.


864757-4 : Traps that were disabled are enabled after configuration save

Component: TMOS

Symptoms:
The ifLinkUpDownTrapEnable setting is not saved to config files nor UCS. If you have disabled 'link up/down' traps for an interface, save the config, and then load the config files or UCS, all interfaces will have traps enabled, even the ones that were explicitly disabled.

Conditions:
-- Disable 'link up/down' traps for an interface.
-- Save the configuration or UCS.
-- Reload the configuration or load the UCS.

Impact:
All interfaces have traps enabled, even the ones that were explicitly disabled.

Workaround:
None.


859717-1 : ICMP-limit-related warning messages in /var/log/ltm

Component: Local Traffic Manager

Symptoms:
'ICMP error limit reached' warning messages in /var/log/ltm:

warning tmm3[23425]: 01200015:4: Warning, ICMP error limit reached.

Conditions:
Viewing /var/log/ltm.

Impact:
Potentially numerous error messages, depending on the traffic and the BIG-IP configuration. No clear indication of how to remedy the situation.

Workaround:
None.

Fix:
The system better tracks what kind of traffic triggers the 'ICMP error limit reached' logs so the issue can be mitigated.


858197-5 : Merged crash when memory exhausted

Component: TMOS

Symptoms:
Merged crashes when system memory is exhausted

Conditions:
System memory is is at 0% available.

Impact:
Merged crashes, stopping stats updates

Workaround:
Reduce the configuration on the system

Fix:
Remove function call to drop row from table on error path where row was not successfully added.


853585-3 : REST Wide IP object presents an inconsistent lastResortPool value

Component: Global Traffic Manager (DNS)

Symptoms:
The output of a REST call to tm/gtm/wideip/<wideip_kind> returns objects that contain inconsistent values for the property 'lastResortPool'. For instance, for the kind 'aaaa', the output might be:

...
"lastResortPool": "aaaa \"\""
...

Conditions:
The BIG-IP admin has modified a Wide IP object via tmsh and used the following command structure:

tmsh modify gtm wideip <wideip_kind> www.example.com last-resort-pool <pool_kind>

Impact:
The lastResortValue in the REST response might be confusing for an external orchestrator that consumes the BIG-IP configuration via iControl REST. BIG-IQ, for instance. BIG-IQ might not work as expected with these values.

Workaround:
Change the Wide IP object via the GUI and set the Last Resort Pool to None, then save the changes.

Fix:
The tmsh interpreter now enforces the structure 'tmsh modify gtm wideip <wideip_kind> www.example.com last-resort-pool <pool_kind> <pool_name>'.


845333-7 : An iRule with a proc referencing a datagroup cannot be assigned to Transport Config

Component: Local Traffic Manager

Symptoms:
If you try to assign an iRule to a Transport Config, and if the iRule has a proc that references a datagroup, the assignment fails with an error:
01070151:3: Rule [/Common/test2] error: Unable to find value_list (datagroup) referenced at line 6: [class lookup "first" datagroup]

Conditions:
-- Assign an iRule to a Transport Config.
-- The iRule has a proc.
-- The proc references a datagroup.

Impact:
Validation fails. An iRule with a proc referencing a datagroup cannot be assigned to Transport Config objects.

Workaround:
Make the datagroup a Tcl variable to bypass validation.

Fix:
Validation can recognize the datagroup on Transport Config objects.


844085-5 : GUI gives error when attempting to associate address list as the source address of multiple virtual servers with the same destination address

Component: TMOS

Symptoms:
With multiple virtual servers that have the same destination address, changing all of them in the GUI to use an address list as their source address will result in the last one changed failing with an error similar to:

01070344:3: Cannot delete referenced virtual address /Common/1.2.3.4.

Conditions:
-- More than one virtual server with the same destination address.
-- Changing all the virtual servers that share the same destination address to use an address list for their source address.

Impact:
Unable to change the source address of a virtual server to an address list.

Workaround:
Use TMSH to manually create a traffic-matching criteria object and assign it to the virtual server:

tmsh create ltm traffic-matching-criteria <virtual server name>_VS_TMC_OBJ destination-address-inline <destination address of virtual server> destination-port-inline <destination port of virtual server> source-address-inline 0.0.0.0 source-address-list <address list name>
}

tmsh modify /ltm virtual <virtual server name> traffic-matching-criteria <virtual server name>_VS_TMC_OBJ destination 0.0.0.0:any


842717-8 : BIG-IP Edge Client for Windows vulnerability CVE-2020-5855

Solution Article: K55102004


841305-3 : HTTP/2 version chart reports are empty in GUI; error appears in GUI and reported in monpd log

Component: Application Visibility and Reporting

Symptoms:
The HTTP/2 version appears in charts, but when clicking on the chart reports, errors are reported in monpd log and the chart is empty in the GUI, with an error reported in the GUI and in the monpd log:

-- DB|ERROR|Oct 21 06:12:24.578|22855|../src/db/MonpdDbAPI.cpp:mysql_query_safe:0209| Error (err-code 1054) executing SQL string :
-- DB|ERROR|Oct 21 06:12:24.578|22855|../src/db/MonpdDbAPI.cpp:runSqlQuery:0677| Error executing SQL query:
-- REPORTER|ERROR|Oct 21 06:12:24.578|22855|../src/reporter/handlers/ReportRunnerHandler.cpp:runReport:0409| Results for query came back as NULL
-- REPORTER|ERROR|Oct 21 06:12:24.578|22855|../src/reporter/ReporterUtils.cpp:throwInternalException:0105| throwing exception to client error code is 1 error msg is Internal error

Conditions:
-- Create a new policy or use an existing policy.
-- Go to Security :: Reporting : Application : Charts.
-- Select weekly charts.

Impact:
Charts are empty in the GUI, and the system logs errors in monpd.

Workaround:
None.

Fix:
Fixed an issue with HTTP stats database tables.


839145-4 : CVE-2019-10744: lodash vulnerability

Solution Article: K47105354


837637-5 : Orphaned bigip_gtm.conf can cause config load failure after upgrading

Solution Article: K02038650

Component: Global Traffic Manager (DNS)

Symptoms:
Configuration fails to load after upgrade with a message:

01420006:3: Can't find specified cli schema data for x.x.x.x

Where x.x.x.x indicates an older version of BIG-IP software than is currently running.

Conditions:
-- Orphaned bigip_gtm.conf from an older-version. This can occur if GTM/DNS is provisioned, then deprovisioned before upgrade, leaving behind a bigip_gtm.conf with the old schema.

-- Upgrading to a new version that does not contain the schema for the old version that the bigip_gtm.conf uses.

Impact:
Configuration fails to load after upgrade.

Workaround:
Before upgrading:

If the configuration in bigip_gtm.conf is not needed, then it can be renamed (or deleted) before upgrading:

   mv /config/bigip_gtm.conf /config/bigip_gtm.conf.id837637
   tmsh load sys config gtm-only

After upgrading (i.e., with the system in the Offline state) services must be restarted to pick up the change:

   mv /config/bigip_gtm.conf /config/bigip_gtm.conf.id837637
   tmsh restart sys service all


834533-8 : Linux kernel vulnerability CVE-2019-15916

Solution Article: K57418558


830413-2 : Intermittent Virtual Edition deployment failure due to inability to access the ssh host key in Azure

Component: TMOS

Symptoms:
Deployment of BIG-IP Virtual Edition may result in an error "Failed to generate ssh host key".

Conditions:
Azure only. Observed for instances with password-based authentication.

Impact:
A timing issues exists with host key generation. The Virtual Machine is likely to be deployed, but users and automation tools might be unable to communicate with the instance.

Workaround:
BIG-IP may still be accessible despite the error.


829677-5 : .tmp files in /var/config/rest/ may cause /var directory exhaustion

Component: TMOS

Symptoms:
The /var partition might become completely full on the disk due to tmp files being written to /var/config/rest. This condition may be accompanied by console error messages similar to the following:
011d0004:3: Disk partition /var (slot #) has only 0% free on secondary blade.

Additionally, there may be periodic restjavad and bigd daemon restarts related to disk space exhaustion.

Conditions:
Process traffic while DoS Dashboard is open.

This issue is happening because a VIPRION process is not available because of a REST timeout.

Impact:
The partition housing /var/config/rest may become 100% full, impacting future disk IO to the partition.

Workaround:
Manually run the following commands, in sequence:

bigstart stop restjavad
rm -rf /var/config/rest/*.tmp
bigstart start restjavad

Fix:
Increased the rest socket timeout value and shellexecutor timeout value to 6 min to fix the timeout issue of viprion worker

The fix also includes automatic removal of unused tmp files.


825501-4 : IPS IM package version is inconsistent on slot if it was installed or loaded when a slot was offline.

Component: Protocol Inspection

Symptoms:
If the IPS IM package is installed on a multi-slot device, and one slot is offline, the IM package version might be different on the offline slot when it comes back online.

It also shows different versions of the Active IM package on different slots.

Conditions:
-- Multi-bladed clustered system.
-- One of the blades is offline.
-- The IPS IM package is installed to the primary blade.

Impact:
The primary blade syncs the IM package to all of the secondary blades that are online; however, when the offline blade comes back online, it does not have the updated IM package.

As a result, traffic being processed by different blades will be using different IPS libraries and might cause inconsistency in the functionality

Workaround:
Although there is no workaround, you can prevent the issue by ensuring that all blades are online when you install an IPS IM package.


820845-5 : Self-IP does not respond to ( ARP / Neighbour Discovery ) when EtherIP tunnels in use.

Component: TMOS

Symptoms:
BIG-IP systems might not respond to ( ARP / Neighbour Discovery ) requests received via EtherIP tunnels on a multi-blade system.

Conditions:
Decapsulated ( ARP / Neighbour Discovery ) requests for an address owned by the BIG-IP system is processed by a secondary blade.

Impact:
Some endpoints may not be able to resolve ( ARP / Neighbour protocol ) via EtherIP tunnel.

Workaround:
Create static ARP entries on affected endpoints.


819301-3 : Incorrect values in REST response for dos-l3 table

Component: Application Visibility and Reporting

Symptoms:
Some of the calculations in the AVR publisher are not performed, and incorrect values are shown in the REST response.

Conditions:
-- Device vector detection and mitigation thresholds are set to 10
-- The attack vector is triggered

Impact:
Wrong values appear in REST reponse

Fix:
Fixed an issue with incorrect values for mitigated attacks.


818253-5 : Generate signature files for logs

Component: TMOS

Symptoms:
To achieve DoDIN APL certification, the BIG-IP system must guarantee the integrity of log files using the standards' recommendation of encrypting those files on the local store. The BIG-IP system does not generate signature files for logs. As a result, the system stores the audit information (i.e., the log files stored in /var/log folder and other subfolders) without creating integrity files.

Conditions:
Viewing the audit information stored in /var/log and other locations.

Impact:
Audit log files are stored without integrity files on the local system.

Workaround:
Disable local logging for audit logs and send them to remote syslog, for example:

tmsh modify sys syslog include "filter f_audit { facility(local0) and not message(AUDIT); }; "

Fix:
There is now a LogIntegrity utility provided to generate signature files for logs.

-- To enable the feature:
 tmsh modify sys db logintegrity.support value enable

-- To set the LogIntegrity loglevel:
 tmsh modify sys db logintegrity.loglevel value debug

You must create private key and store it in SecureVault before enabling this feature. To do so:

1. Generate a private key with the name logfile_integrity.key, for example:
 tmsh create sys crypto key logfile_integrity.key key-type rsa-private key-size 2048 gen-certificate security-type password country US city Seattle state WA organization "Example, Inc." ou "Example-Creation Team" common-name www.example.com email-address admin@example.com lifetime 365

2. Generate RSA encrypted private SSL keys:

2a. Go to the filestore location on the BIG-IP system:
 cd /config/filestore/files_d/Common_d/certificate_key_d/

 ls | grep logfile_integrity:Common:logfile_integrity.key_63031_2

 openssl rsa -aes256 -in :Common:logfile_integrity.key_63031_2 -out logfile_integrity_secure.key

2b. Specify the PEM password/passphrase (e.g., root0101) to use to protect the SSL private key (in this example, logfile_integrity_secure.key is the password protected private key):

2c. run command to list the generated files
 ls | grep logfile_integrity :Common:logfile_integrity.key_63031_2 logfile_integrity_secure.key

3. Install the generated password protected SSL private key with the same password (e.g., root0101) used in step 2 to store in 'secure vault' on the BIG-IP system:

 tmsh install sys crypto key logfile_integrity.key passphrase example root0101 from-local-file logfile_integrity_secure.key


Once the feature is enabled and the private key installed, The signature files are generated under /var/log/digest whenever log files get rotated.


If you want to verify Signatures, follow these steps:

1. Go to the filestore location on the BIG-IP system :
 cd /config/filestore/files_d/Common_d/certificate_d
 
2. Execute the following command to generate the public key.
 openssl x509 -in :Common:logfile_integrity.key_63031_2 -noout -pubkey > certificatefile.pub.cer

3.Verify the signature file using public key:
 openssl dgst -sha256 -verify /config/filestore/files_d/Common_d/certificate_d/certificatefile.pub.cer -signature /var/log/digest/audit.1.sig /var/log/audit.1


818213-7 : CVE-2019-10639: KASLR bypass using connectionless protocols

Solution Article: K32804955


817369-3 : TCP, UDP, and SCTP proxy converts to GEO proxy when georedundancy profile is attached with virtual server.

Component: Service Provider

Symptoms:
When a georedundancy profile is attached to a TCP, UDP, and SCTP virtual server, proxy does not convert to GEO proxy.

Conditions:
Attach georedundancy profile to a standard TCP, UDP, or SCTP virtual server.

Impact:
Unable to convert proxy to GEO proxy when georedundancy profile is attached with TCP, UDP and SCTP virtual

Workaround:
None.


814953-8 : TMUI dashboard hardening

Solution Article: K43310520


814585-8 : PPTP profile option not available when creating or modifying virtual servers in GUI

Component: TMOS

Symptoms:
There is no option to configure a PPTP profile for a virtual server in the GUI.

Conditions:
Creating or modifying a virtual server in the GUI.

Impact:
Unable to configure the PPTP profile for a virtual server using the GUI.

Workaround:
Use TMSH to add a PPTP profile to the virtual server.


808409-5 : Unable to specify if giaddr will be modified in DHCP relay chain

Component: Local Traffic Manager

Symptoms:
ID746077 changed the dhcprelay behavior in order to comply with RFC 1542 Clarifications and Extensions for BOOTP.

However, as the change also encompasses the DHCP-to-DHCP relay scope, the behavior cannot be configurable with a db key.

Conditions:
DHCP Relay deployments where the giaddr needs to be changed.

Impact:
You are unable to specify whether giaddr will be changed.

Workaround:
None.

Fix:
A new sys db tmm.dhcp.relay.giaddr.overwrite is introduced

The default is :

sys db tmm.dhcp.relay.giaddr.overwrite {
    value "enable"
}

On versions with a fix to 746077, the sys db DOES NOT exist and BIG-IP will always retain the source IP

On versions with both this fix and ID748333 fix, this fix overrides the fix for 746077. To change the default, set to "disable" to retain


807337-6 : Config utility (web UI) output differs between tmsh and AS3 when the pool monitor is changed.

Component: TMOS

Symptoms:
When a transaction attempts multiple commands (delete, create, modify) for the same object in the same transaction, the results can be unexpected or undefined. A common example is: 'transaction { delete key create_if key }' where the transaction attempts 'delete key', and then 'create_if key', which unmarks the delete operation on the key (so in this case the key remains unmodified). In other cases it is possible that monitoring stops for the associated object, such as for: pool, pool_member, node_address, monitor.

Conditions:
A user-initiated transaction attempts multiple commands for the same monitor-related object (such as delete, create, modify).

Impact:
The GUI shows misleading info about the pool monitor.The monitor-related object may be unchanged, or monitoring may stop for that object.

Workaround:
Transactions modifying a monitor-related object (pool, pool_member, node_address, monitor) should perform a single command upon that object (such as one of: 'delete', 'create', 'modify').

Fix:
Behavior is as-expected when a transaction executes multiple commands (such as 'delete', 'create', 'modify') upon the same monitor-related object (pool, pool_member, node_address, monitor).


806073-8 : MySQL monitor fails to connect to MySQL Server v8.0

Component: TMOS

Symptoms:
The LTM MySQL health monitor fails to connect to a MySQL server running MySQL Server v8.0.
A pool member configured for a MySQL server running MySQL Server v8.0 and using the MySQL health monitor will be marked DOWN.

Conditions:
This occurs when using the LTM MySQL health monitor to monitor a MySQL server running MySQL Server v8.0.

Impact:
BIG-IP cannot monitor the health of a MySQL server running MySQL Server v8.0 using the MySQL health monitor.


803629-8 : SQL monitor fails with 'Analyze Response failure' message even if recv string is correct

Component: Local Traffic Manager

Symptoms:
For a database (mssql, mysql, postgresql or oracle) monitor type, with a 'recv' string configured, a pool member configured to use the DB monitor may be marked down even if the server is working and includes the configured response string among the response data.

Debug logging of the SQL monitor indicates the following:
... [DBPinger-3778] - Response from server: Database: 'db1'Database: 'information_schema'
... [DBPinger-3778] - Checking for recv string: information_schema
... [DBPinger-3778] - Analyze Response failure

The log shows 'Analyze Response failure' error message even when the configured 'recv' string appears within the response message from the DB server.

Conditions:
This occurs when the string matching the configured 'recv' string value does not appear in the response from the DB server in the row indicated by the 'recv-row' value configured for the monitor.

The default value of 'none' for the 'recv-row' monitor configuration value is actually interpreted as 'row 1' by the DB monitor core implementation.
Therefore, with the default configuration, any 'recv' string configured must appear in the first row of the DB server response in order to be recognized as a match.

Impact:
The DB monitor fails, and the DB server (node) is marked as down even though it is reachable and responding correctly per the configured 'recv' string.

Workaround:
You may use one of the following methods to work around this issue:
1. Configure the DB monitor's 'recv' string to match on the first row in the server response message.
2. Configure the 'recv-row' value in the DB monitor to match the row of the DB server's response which contains the configured 'recv' string.
3. Do not configure 'send' or 'recv' string for the DB monitor.


803233-6 : Pool may temporarily become empty and any virtual server that uses that pool may temporarily become unavailable

Component: Local Traffic Manager

Symptoms:
Intermittently (depending the timing of operations that keep MCP busy):

1. Messages similar to the following may be logged in the LTM log, indicating that the virtual server associated with a pool became temporarily unavailable:

-- notice mcpd[4815]: 01071682:5: SNMP_TRAP: Virtual /Common/test_vs has become unavailable.
-- notice mcpd[4815]: 01071681:5: SNMP_TRAP: Virtual /Common/test_vs has become available.

2. Optionally, if a 'min-up-members' value is configured for the pool, a message similar to the following may be logged in the LTM log, indicating that the number of available pool members became less than the configured value:

-- notice mcpd[4815]: 01070282:3: Number of pool members 2 less than min up members 3.

Conditions:
1. The pool members are all FQDN pool members.
2. The DNS query to resolve pool member FQDNs returns a completely new (non-overlapping) set of IP addresses.
(This causes all existing Ephemeral pool members to be removed and replaced with new Ephemeral pool members.)
3. MCP is very busy and slow to process messages.

Impact:
Under these conditions, existing Ephemeral pool members may be removed before new Ephemeral pool members can be created to replace them, causing the pool member to become temporarily empty. This can result in intermittent loss of availability of the virtual server if all records returned by the DNS server for the referenced FQDN change from the previous response.

Workaround:
None.


797829-7 : The BIG-IP system may fail to deploy new or reconfigure existing iApps

Component: TMOS

Symptoms:
The BIG-IP system may fail to deploy new or reconfigure existing iApps. When this happens, a long error message is displayed in the GUI that begins with:

script did not successfully complete: ('source-addr' unexpected argument while executing

The message is also logged to /var/log/audit by scriptd with a severity of 'notice'.

The unexpected argument mentioned in the error varies depending on the iApp being deployed and on the settings you configure. You may also see 'snatpool', 'ldap', etc.

Conditions:
This issue occurs when:

-- The BIG-IP system is configured with multiple users of varying roles.

-- The scriptd daemon has already spawned the maximum number (5) of allowed child processes to serve its queue, and all the processes were assigned a low 'security context'. This can happen, for instance, if a low-privileged user (such as an Auditor) has been looking at the configuration of iApps using the GUI a lot.

-- Subsequently, a high-privileged user (such as an Administrator) attempts to deploy a new iApp or reconfigure an existing one.

Note: You can inspect the number of child processes already created by scriptd by running the following command:

pstree -a -p -l | grep scriptd | grep -v grep

However, it is not possible to determine their current 'security context'.

Impact:
New iApps cannot be deployed. Existing iApps cannot be re-configured.

Workaround:
Restart scriptd. To restart scriptd, run:

bigstart restart scriptd

Running this command has no negative impact on the system.

The workaround is not permanent; the issue may occasionally recur depending on your system usage.

Fix:
The system now stops all scriptd child processes and creates new ones with the new user security-context when the user changes.


789421-5 : Resource-administrator cannot create GTM server object through GUI

Component: Global Traffic Manager (DNS)

Symptoms:
Users logged in with a role of resource-administrator are unable to create a GTM server object via GUI. The warning banner reports 'No Access'.

Conditions:
A user with a role of resource-administrator attempts to create a GTM server object.

Impact:
Unable to create GTM server object via the GUI.

Workaround:
Use tmsh or iControl/REST.


788577-8 : BFD sessions may be reset after CMP state change

Component: TMOS

Symptoms:
A CMP (Clustered Multiprocessing) state change occurs when the state of the BIG-IP system changes.

This happens in the following instances:
  - Blade reset.
  - Booting up or shutting down.
  - Running 'bigstart restart'.
  - Setting a blade state from/to primary/secondary.

During these events, Bidirectional Forwarding Detection (BFD) session processing ownership might be migrating from old, processing TMMs to new, selected TMMs. This process is rapid and could lead to contest between several TMMs over who should be the next BFD processing owner.

It might also lead to a situation where the BFD session is deleted and immediately recreated.

This problem occurs rarely and only on a chassis with more than one blade.

Conditions:
-- VIPRION chassis with more than one blade.
-- CMP hash of affected VLAN is changed from the Default value, for example, to Source Address.
-- BFD peering is configured.
-- CMP state change is occurred on one of the blades.
-- BFD connection is redistributed to the processing group (TMMs) on the blade that experienced the CMP state change and the contest between the old TMM owner and the new TMM owner occurs.

Impact:
When the BFD session is recreated, it marks corresponding routing protocol DOWN if it's configured. The protocol might be BGP, OSPF, or any other routing protocols that support BFD.

This causes the routing protocol to withdraw dynamic routes learnt by the configured protocol, making it impossible to advertise dynamic routes of affected routing protocols from the BIG-IP system to the configured peers. This can lead to unexpected routing decisions on the BIG-IP system or other devices in the routing mesh.

In most cases, unexpected routing decision are from networks learnt by affected routing protocols when the routing process on the BIG-IP system become unreachable. However, this state is short-lived, because the peering will be recreated shortly after the routing protocol restarts. The peering time depends on the routing configuration and responsiveness of other routing devices connected to the BIG-IP system. It's the usual routing convergence period, which includes setting the peering and exchanging routing information and routes.

Workaround:
There are two workarounds, although the latter is probably impractical:

-- Change CMP hash of affected VLAN to the Default value.
-- Maintain a chassis with a single blade only. Disable or shut down all blades except one.

Fix:
BFD session is no longer reset during CMP state change.


788465-6 : DNS cache idx synced across HA group could cause tmm crash

Component: Global Traffic Manager (DNS)

Symptoms:
DNS cache idx conflicts and tmm crash.

Conditions:
-- High availability (HA) configuration.
-- DNS cache is configured and synced to the peer twice
-- A second DNS cache is configured on the peer.

Impact:
The idx conflicts will be observed. If the second DNS cache is of another type and is added to a virtual server, accessing that virtual server might cause a tmm core. Traffic disrupted while tmm restarts.

Workaround:
On the BIG-IP system that has the DNS cache idx conflicts, restart tmm:
# bigstart restart tmm


787885-3 : The device status is falsely showing as forced offline on the network map while actual device status is not.

Component: TMOS

Symptoms:
Network Map in GUI shows incorrect [Forced Offline] status.

Conditions:
-- Multi-blade system
The device status in the network map is falsely shown [Forced Offline] when actual device status is something else other than [Forced Offline]. In other words, it is always shown as [Forced Offline].

-- Non multi-blade system
The device status in the network map is falsely shown [Forced Offline] when actual device status is something else other than [Active] or [Forced Offline]. In other words, it displays fine only for [Active] and [Forced Offline].

Impact:
The device status in the network map is not reliable

Workaround:
None.


783125-5 : iRule drop command on DNS traffic without Datagram-LB may cause TMM crash

Component: Global Traffic Manager (DNS)

Symptoms:
The TMM may crash and restart when an iRule on a DNS virtual server performs the 'drop' command while the BIG-IP system is handling both a DNS request and DNS response at the same time for the same DNS client IP and port without UDP Datagram-LB.

Conditions:
-- The BIG-IP instance has two or more TMM processes as a result of having two or more physical cores or virtual CPUs.
-- A virtual server with both DNS and UDP profiles and one or more iRules.
-- The UDP profile has Datagram LB disabled.
-- The iRules have a 'drop' command.
-- The iRules have a DNS_REQUEST and/or DNS_RESPONSE event with an iRule command that require coordinating data with another TMM on the system, such as the 'table' command.

Impact:
TMM crash or restart. Traffic impacted. Traffic disrupted while tmm restarts.

Workaround:
F5 strongly recommends using a UDP profile with Datagram-LB enabled for DNS UDP virtual servers.

Alternatively, replace the 'drop' command with DNS::drop in DNS_REQUEST and DNS_RESPONSE events, or with UDP::drop in other iRule events.

See the respective references pages for DNS::drop and UDP::drop for the Valid Events each iRule command is available in:
    https://clouddocs.f5.com/api/irules/DNS__drop.html
    https://clouddocs.f5.com/api/irules/UDP__drop.html


779857-3 : Misleading GUI error when installing a new version in another partition

Component: TMOS

Symptoms:
While installing a new version in another partition, the GUI displays an error for a brief time:

'Install Status':Failed Troubleshooting

Conditions:
Install a new version in another partition.

Impact:
The GUI error is misleading. It is showing the install status as 'Failed Troubleshooting' even though the installation is proceeding normally. The installation process is proceeding normally; only the error is incorrect and does not indicate a problem with the installation.

Workaround:
If you click on the 'Troubleshooting' link on the GUI screen, the GUI indicates that it is actually installing properly without any error.


778049-1 : Linux Kernel Vulnerability: CVE-2018-13405

Solution Article: K00854051


776393-4 : Memory leak in restjavad causing restjavad to restart frequently with OOM

Component: TMOS

Symptoms:
Restjavad frequently (approximately every 5 minutes) restarting due to OutOfMemory:Java heap space with no extra memory.

Conditions:
-- BIG-IP system with no extra memory given to restjavad.
-- The configuration contains a large number of configuration items related to APM access-policies, APM policy-items, APM policy agents, LTM nodes, LTM rules, DNS Requests, sys application services, LTM data-groups, LTM profiles, security bot-defense profiles, and sys file ssl-certs.

Impact:
REST API intermittently unavailable.

Workaround:
Give restjavad extra memory. This is two-step process.

1. Update memory allocated to the control plane using TMUI. System :: Resource Provisioning. The line for Management has a drop-down box for Small, Medium, or Large. The resulting sizes for restjavad is 192, 352, and 592, respectively. Set this to Large unless a custom value greater than 500MB is already in use.

2. Run the following two commands, in sequence:
   tmsh modify sys db restjavad.useextramb value true
   bigstart restart restjavad

Fix:
Restjavad no longer restarts, and REST API is always available.


773693-9 : CVE-2020-5892: APM Client Vulnerability

Solution Article: K15838353


768085-6 : Error in python script /usr/libexec/iAppsLX_save_pre line 79

Component: iApp Technology

Symptoms:
While creating a UCS file, you see a confusing error message, and the UCS file is not created:
Failed task: %s: %s"%(taskUri, taskResult['message']))"

Conditions:
This can be encountered while trying to create a UCS file.

Impact:
Certain failure messages are not interpreted correctly by the script, resulting in the actual error message not being displayed.

Workaround:
None.


766017-7 : [APM][LocalDB] Local user database instance name length check inconsistencies

Component: Access Policy Manager

Symptoms:
Tmsh accepts long localdb instance names, but ldbutil later refuses to work with names longer than 64 characters.

The GUI limits the instance name length to 64 characters including the partition prefix, but this is not obvious to the admin.

Conditions:
-- Create a 64 character long local user database instance using tmsh.
-- Try to add users to this instance or try to delete the instance from the GUI.

Impact:
A tmsh-created localdb instance with a name length greater than 64 characters can be created but cannot be used.

Workaround:
Delete instance from tmsh and re-create it with a shorter name.

Fix:
Tmsh now enforces the length limit for localdb instance names.


760629-6 : Remove Obsolete APM keys in BigDB

Component: Access Policy Manager

Symptoms:
Several APM/Access BigDB keys are obsolete and should be removed as they only add confusion

Conditions:
--BigIp is UP and Running

Impact:
Though those keys are not being used they create confusion as a placeholder

Workaround:
Remove those keys from BigDB and control plane side as those are not being used. But don't remove the keys which has still dependancies with other modules and also don/'t remove those keys used in upgrade

Fix:
Remove those keys from BigDB and control plane side as those are not being used. But don't remove the keys which has still dependancies with other modules and also don/'t remove those keys used in upgrade


759988-1 : Geolocation information inconsistently formatted

Component: Fraud Protection Services

Symptoms:
The ${geo} pattern in the Logging Profile has only GeoIP data; however, in alerts that are sent to either the alert server or to BIG-IQ, the GEO data includes both GeoIP and GeoLocation information.

Conditions:
Configure ${geo} pattern in Logging Profile template and trigger a logging event.

Impact:
GeoLocation data is missing in logs written by Logging Profile when using ${geo} pattern.

Fix:
The ${geo} pattern in Logging Profile template now provides full GEO informaion, both GeoIP and GeoLocation, in the same format as in alerts.


759564-1 : GUI not available after upgrade

Component: TMOS

Symptoms:
After installing over the top of a previous version, the Management GUI is inaccessible while SSH access works. You may see one or more of the following conditions

    Shell prompt may show logger[1234]: Re-starting named
    bigstart restart httpd fails
    bigstart start httpd fails

Conditions:
Installation over a previously used Boot Volume

Impact:
Corrupt install

Workaround:
Boot back to previous boot volume and then delete the boot volume containing the failed install.


756139-5 : Inconsistent logging of hostname files when hostname contains periods

Component: TMOS

Symptoms:
Some logs write the hostname with periods (eg, say for FQDN. For example, /var/log/user.log and /var/log/messages files log just the hostname portion:

-- user.log:Aug 5 17:05:01 bigip1 ).
-- messages:Aug 5 16:57:32 bigip1 notice syslog-ng[2502]: Configuration reload request received, reloading configuration.


Whereas other log files write the full name:

-- daemon.log:Aug 5 16:58:34 bigip1.example.com info systemd[1]: Reloaded System Logger Daemon.
-- maillog:Aug 5 16:55:01 bigip1.example.com err sSMTP[12924]: Unable to connect to "localhost" port 25.
-- secure:Aug 5 17:02:54 bigip1.example.com info sshd(pam_audit)[2147]: 01070417:6: AUDIT - user root - RAW: sshd(pam_audit): user=root(root) partition=[All] level=Administrator tty=ssh host=10.14.13.20 attempts=1 start="Mon Aug 5 17:02:30 2019" end="Mon Aug 5 17:02:54 2019".
-- ltm:Aug 5 17:02:42 bigip1.example.com warning tmsh[2200]: 01420013:4: Per-invocation log rate exceeded; throttling.

Conditions:
BIG-IP hostname contains periods or an FQDN:

[root@bigip1:Active:Standalone] log # tmsh list sys global-settings hostname
sys global-settings {
    hostname bigip1.example.com
}

Impact:
Hostname is logged inconsistently. Some logs write the full hostname (FQDN), while other log files write only the hostname portion. This can make searching on hostname more complicated.

Workaround:
None.

Fix:
Hostnames are now written consistently for all log files in /var/log directory.

Behavior Change:
Syslog-ng was using truncated hostname (without FQDN) while logging. This release adds fqdn use_fqdn(yes) in the syslog-ng template, so the system now logs the full hostname (FQDN).


751103-1 : TMSH: 'tmsh save sys config' prompts question when display threshold is configured which is causing scripts to stop

Component: TMOS

Symptoms:
Issuing the command 'tmsh save sys config' results in a question when display threshold is set and when management routes are configured. There is no prompt when no management routes are configured. This question is posted only when management-routes are configured, and does not appear when other provisioning commands are issued and the config is saved.

Conditions:
1. Set the cli preference display-threshold to a smaller value than the default.
2. Create management routes.
3. Issue the following command:
tmsh save sys config

Impact:
When there are more items configured than the threshold, the system presents a question:
Display all <number> items? (y/n)

Scripts are stopped until the prompt is answered.

Workaround:
To prevent the question from popping up, set display threshold to 0 (zero).


In the case of this script, you can also delete the management route definitions to prevent the question from being asked.


749007-5 : South Sudan, Sint Maarten, and Curacao country missing in GTM region list

Component: TMOS

Symptoms:
South Sudan, Sint Maarten, and Curacao countries are missing from the region list.

Conditions:
-- Creating a GTM region record.
-- Create a GTM any region of Country South Sudan, Sint Maarten, or Curacao.

Impact:
Cannot select South Sudan county from GTM country list.

Workaround:
None

Fix:
South Sudan, Sint Maarten, and Curacao are now present in the GTM country list.


747020-3 : Requests that evaluate to same subsession can be processed concurrently

Component: Access Policy Manager

Symptoms:
Requests that evaluate to the same subsession can be processed concurrently in some cases

Conditions:
-- Per-Request policy with subroutines.
-- Duplicate requests are sent that match existing subsession gating criteria.

Impact:
The request gets aborted with error messages in /var/log/apm:
apmd_plugin.cpp func: "serialize_apmd_reply()" line: 495 Msg: AccessV2 agent execution error 4.

Workaround:
None.


743826-5 : Incorrect error message: "Can't find pool []: Pool was not found" even though Pool member is defined with port any(0)

Component: Application Visibility and Reporting

Symptoms:
When a pool member is defined with port any(0), calling the GetPoolMember() function, gives an incorrect error message that the pool member was not found.

Conditions:
Pool member with port any(0)

Impact:
Wrong error message printed to avrd.log

Fix:
Added a flag that indicates whether or not to print an error message to the GetPoolMember() function.


743105-1 : BIG-IP SNAT vulnerability CVE-2021-22998

Solution Article: K31934524


740589-5 : Mcpd crash with core after 'tmsh edit /sys syslog all-properties'

Component: TMOS

Symptoms:
Syslog-ng consumes more than 95% CPU starving other processes of CPU time. This leads to eventual mcpd crash with core.

Conditions:
Configuring nonexistent local IP addresses and remote log server.

Impact:
Abnormal CPU usage. Potential eventual mcpd crash with core.

Workaround:
To mitigate the issue, you can use either of the following:

-- Follow these two steps:
 1. Remove the remote log server from the configuration.
 2. Replace the nonexistent local IP addresses with self IP addresses.

-- Configure the remote destination host with a unique parameter in the configuration so that syslog does not get confused if there are multiple entries:
udp(192.0.2.1 port(512) localip(192.0.2.200) persist-name(r1));
udp(192.0.2.1 port(512) localip(192.0.2.201) persist-name(r2));
udp(192.0.2.100 port(512) localip(192.0.2.200) persist-name(r3));
udp(192.0.2.100 port(512) localip(192.0.2.201) persist-name(r4));


739570-5 : Unable to install EPSEC package

Component: Access Policy Manager

Symptoms:
Installation of EPSEC package via tmsh fails with error 'Configuration error: Invalid mcpd context, folder not found (/Common/EPSEC/Images)"

Conditions:
-- EPSEC package was never installed on the BIG-IP machine.
-- Running 'tmsh create apm epsec epsec-package <package_name>.iso local-path /shared/apm/images/<package_name>.iso'

Impact:
First time installation of EPSEC package through tmsh fails.

Workaround:
You can do a first-time installation of EPSEC with the following commands:

tmsh create sys folder /Common/EPSEC
tmsh create sys folder /Common/EPSEC/Images
tmsh install Upload/<package_name>.iso

Fix:
When EPSEC package is installed through tmsh command, the folder /Common/EPSEC/Images gets created if it does not exist.


739505-4 : Automatic ISO digital signature checking not required when FIPS license active

Component: TMOS

Symptoms:
Automatic ISO digital signature checking occurs but is not required when FIPS license active.

The system logs an error message upon an attempt to install or update the BIG-IP system:
 failed (Signature file not found - /shared/images/BIGIP-13.1.0.0.0.1868.iso.sig)

Conditions:
When the FIPS license is active, digital signature checking of the ISO is automatically performed. This requires that both the ISO and the digital signature (.sig) file are uploaded to the system.

Impact:
Installation does not complete if the .sig file is not present or not valid. Installation failure.

Workaround:
To validate the ISO on the BIG-IP system, follow the procedure described in K24341140: Verifying BIG-IP software images using .sig and .pem files :: https://support.f5.com/csp/article/K24341140.

Fix:
The restriction of requiring automatic signature checking of the ISO is removed. The procedure described in K24341140: Verifying BIG-IP software images using .sig and .pem files :: https://support.f5.com/csp/article/K24341140 to perform the checks on or off the BIG-IP system is still valid, but that checking is optional.


738032-4 : BIG-IP system reuses cached session-id after SSL properties of the monitor has been changed.

Component: Local Traffic Manager

Symptoms:
The BIG-IP system maintains an SSL session cache for SSL (https) monitors. After changing the properties of an SSL monitor that might affect the operation of SSL, the BIG-IP continues to reuse an existing SSL session ID.

Conditions:
-- The BIG-IP system has cached session ID from previous SSL session.
-- SSL properties of monitor that might affect the operation of SSL are changed.
-- Monitor is using bigd.

Impact:
Sessions still use cached session ID. If session continues to succeed, session uses cached session ID till expiry.

Workaround:
-- Restart bigd.
-- Remove the monitor from the object and re-apply.
-- Use in-tmm monitors.


722337-4 : Always show violations in request log when post request is large

Component: Application Security Manager

Symptoms:
The system does not always show violations in request log when post request is large.

Conditions:
A large post request with many parameters is sent.

Impact:
Although the violations is handled correctly, it is not reported.

Workaround:
Disable learning mode.

The internal parameter pb_sampling_high_cpu_load can define what is seen as high CPU load above which sampling does not take place. The default is 60.

-- Using a lower value reduces the chances of sampling data.
-- Using 0 makes sampling never happen and thus this issue does not occur (this slows down automatic policy building).


718189-10 : Unspecified IP traffic can cause low-memory conditions

Component: Local Traffic Manager

Symptoms:
Unspecified IP traffic can cause low-memory conditions in TMM

Conditions:
Unspecified IP traffic can cause low-memory conditions in TMM

Impact:
Traffic stops while the TMM restarts.

Fix:
TMM now handles IP traffic properly


717346-8 : [WebSocket ] tmsh show /ltm profile WebSocket current and max numbers far larger than total

Solution Article: K13040347

Component: Local Traffic Manager

Symptoms:
WebSocket profile statistics for current and maximum connections are always very large, even right after restarting the system. The numbers are several orders of magnitude larger than the statistics for total connections.

Conditions:
Rarely occurring, unstable network could be one of the reasons.

Impact:
Cannot use stats for troubleshooting.

Workaround:
Reset the stats using the following command:
# tmsh reset-stats ltm profile websocket


714642-7 : Ephemeral pool-member state on the standby is down

Component: Local Traffic Manager

Symptoms:
On a standby BIG-IP system, an ephemeral pool-members state remains user-down after re-enabling an FQDN node on the primary system.

Conditions:
Re-enabling a forced-down FQDN node on the primary system.

Impact:
On the standby system, the ephemeral pool-members are in state: user-down, (forced-down in GUI).

Workaround:
None.


714176-6 : UCS restore may fail with: Decryption of the field (privatekey) for object (9717) failed

Component: TMOS

Symptoms:
-- UCS archive restore fails
-- The Traffic Management Shell (TMSH) and/or /var/log/ltm file show following error message:
01071769:3: Decryption of the field (privatekey) for object (9717) failed. Unexpected Error: Loading configuration process failed.

Conditions:
- Restoring configuration from UCS.
- The UCS is being restored on a different BIG-IP system with a different master key.

Impact:
-- The UCS configuration is not applied.
-- The BIG-IP is not in a fully operational state.

Workaround:
If you encounter this error and dynad is not in use (dynamic debug) you can manually edit bigip_base.conf.

1. Locate the dynad config in /config/bigip_base.conf file:

For example, the dynad config will look like:
sys dynad key {
    key $M$jV$VX7HMp5q346nsTYDYFPnYdJLrBPyQSCrDTJYAz4je7KXJAC38fxtDJL35KtF66bq
}

2. Modify the dynad configuration lines to:
sys dynad key {
    key "test"
}

3, Save the updated bigip_base.conf file
4. Load the configuration with command: tmsh load sys config

Fix:
The log message is improved to provide the BIG-IP administrator with more specific detail that the dynad key failed to be decrypted.


706521-1 : The audit forwarding mechanism for TACACS+ uses an unencrypted db variable to store the password

Solution Article: K21404407

Component: TMOS

Symptoms:
TACACS Shared Key is not encrypted in the DB key and is visible to admin and a read-only user.

Conditions:
Configure TACACS+ auditing forwarder.

Impact:
Exposes sensitive information.

Workaround:
None.

Fix:
The sensitive data is not exposed, and this issue is fixed.


693360-1 : A virtual server status changes to yellow while still available

Solution Article: K52035247


648242-7 : Administrator users unable to access all partition via TMSH for AVR reports

Solution Article: K73521040

Component: Application Visibility and Reporting

Symptoms:
Using the TMSH for AVR reports can fail if it contains partition based entities, even with an administrator user (which should have permissions to all partitions).

Conditions:
Using the TMSH for querying partitioned based stats with an administrator user.

Impact:
AVR reports via TMSH will fail when using partition based entities.

Workaround:
None.

Fix:
Allowing for administrator users to get all partitions available on query.


644192-9 : Query of "MX" "any" RR of CNAME wide IP results in NXDOMAIN

Solution Article: K23022557

Component: Global Traffic Manager (DNS)

Symptoms:
Query of "MX" "any" RR of CNAME wide IP results in NXDOMAIN.

Conditions:
A CNAME wide IP and a dnx with parent zone.
For example, CNAME wide IP for www.siterequest.com and a dnx zone for siterequest.com.

Impact:
Cache resolvers will remember NXDOMAIN for the entire name. So clients talking to those caches asking for A/AAAA records may actually get NXDOMAIN responses until the negative cache expires.

Workaround:
Option 1: Create a related "www.siterequest.com" txt record in ZoneRunner
Option 2: Create a ltm virtual server iRule, similar to this:
when DNS_RESPONSE {
  if { [DNS::question name] eq "www.siterequest.com" } {
    if { [DNS::header rcode] eq "NXDOMAIN" } {
        DNS::header rcode NOERROR
        DNS::authority clear
        return
    }
  }
}


489572-6 : Sync fails if file object is created and deleted before sync to peer BIG-IP

Solution Article: K60934489

Component: TMOS

Symptoms:
Sync fails if you create/import a file object and delete it before triggering manual sync; ltm logs contain messages similar to the following:

Standby:
-- err mcpd[7339]: 01070712:3: Caught configuration exception (0), Failed to sync files..
-- err mcpd[7339]: 01071488:3: Remote transaction for device group /Common/test to commit id 42 6079477704784246664 /Common/test failed with error 01070712:3: Caught configuration exception (0), Failed to sync files...

Active:
-- err mcpd[6319]: 0107134a:3: File object by name (/Common/filename) is missing.

Conditions:
This occurs when the following conditions are met:
-- BIG-IP systems configured for high availability (HA) are not configured to sync automatically, and incremental synchronization is enabled (these are the default settings).
-- One or more file objects are created and deleted before performing a sync from Active to Standby.

Impact:
Sync fails.

Workaround:
When you create/add a file object, make sure to sync before deleting it.

If a system is already in this state, perform a full sync and overwrite the configuration, as described in K13887: Forcing a BIG-IP device group member to initiate a ConfigSync operation :: https://support.f5.com/csp/#/article/K13887.


398683-5 : Use of a # in a TACACS secret causes remote auth to fail

Solution Article: K12304

Component: TMOS

Symptoms:
TACACS remote auth fails when the TACACS secret contains the '#' character.

Conditions:
TACACS secret contains the '#' character.

Impact:
TACACS remote auth fails.

Workaround:
Do not use the '#' character in the TACACS secret.



Known Issues in BIG-IP v16.0.x


TMOS Issues

ID Number Severity Solution Article(s) Description
934241-1 1-Blocking   TMM may core when using FastL4's hardware offloading feature
913713-1 1-Blocking   Rebooting a blade causes MCPd to core as it rejoins the cluster
980325-6 2-Critical   Chmand core, failover occurs.
979045-2 2-Critical   The tpm-status-check service shows System Integrity Status: Invalid when Engineering Hotfix installed on certain platforms
976669-1 2-Critical   FIPS Integrity check fails for other secondary blades after rebooting/replacing secondary blade
967905-4 2-Critical   Attaching a static bandwidth controller to a virtual server chain can cause tmm to crash
950673-4 2-Critical   Hardware Syncookie mode not cleared when deleting/changing virtual server config.
950201-2 2-Critical   Tmm core on GCP
944513-3 2-Critical   Apache configuration file hardening
943109-1 2-Critical   Mcpd crash when bulk deleting Bot Defense profiles
942549-1 2-Critical   Dataplane INOPERABLE - Only 7 HSBs found. Expected 8
941893-4 2-Critical   VE performance tests in Azure causes loss of connectivity to objects in configuration
937481-3 2-Critical   Tomcat restarts with error java.lang.OutOfMemoryError
929133-1 2-Critical   TMM continually restarts with errors 'invalid index from net device' and 'device_init failed'
888341-8 2-Critical   HA Group failover may fail to complete Active/Standby state transition
886693-4 2-Critical   System may become unresponsive after upgrading
866957-2 2-Critical   Load balancing IPsec tunnels
865653-2 2-Critical   Wrong FDB table entries with same MAC and wrong VLAN combination
856713-4 2-Critical   IPsec crash during rekey
842669-5 2-Critical   Syslog-ng / systemd-journald cannot handle logs with embedded newlines, write trailing content to /var/log/user.log
799001-8 2-Critical   Sflow agent does not handle disconnect from SNMPD manager correctly
785017-5 2-Critical   Secondary blades go offline after new primary is elected
780437-7 2-Critical   Upon rebooting a VIPRION chassis provisioned as a vCMP host, some vCMP guests can return online with no configuration.
777389-6 2-Critical   In rare occurrences related to PostgreSQL monitor, the mcpd process restarts
749332-1 2-Critical   Client-SSL Object's description can be updated using CLI but not REST
742764-1 2-Critical   The raccoon daemon is spawned more then once on startup, one fails and cores.
742419-3 2-Critical   BIG-IP NIC teaming of SR-IOV interfaces does not work under VMware ESXi
739507-4 2-Critical   Improve recovery method for BIG-IP system that has halted from a failed FIPS integrity check
718573-4 2-Critical   Internal SessionDB invalid state
671545-3 2-Critical   MCPD core while booting up device with error "Unexpected exception caught"
382363-2 2-Critical K30588577 min-up-members and using gateway-failsafe-device on the same pool.
987081-2 3-Major   Alarm LED remains active on Secondary blades even after LCD alerts are cleared
981485-5 3-Major   Neurond enters a restart loop after FPGA update.
977609-2 3-Major   Request logging profile not logging server-side variables on a virtual-server with rate-limit or connection-limit applied
976013-5 3-Major   If bcm56xxd starts while an interface is disabled, the interface cannot be enabled afterwards
974225-1 3-Major   Link Status traps are not issued on VE based BIG-IP systems
972785-7 3-Major   Unable to create virtual server with a non-zero Route Domain for custom partition via iControl SOAP
970829-6 3-Major   iSeries LCD incorrectly displays secure mode after reboot
969329-3 3-Major   Dashboard: Chart title/legend 'Control Plane' needs to be modified within dashboard of BIG-IP
969213-3 3-Major   VMware: management IP cannot be customized via net.mgmt.addr property
966949-1 3-Major   Multiple FQDN ephemeral nodes not deleted upon deleting FQDN template node
965941-1 3-Major   Creating a net packet filter in the GUI does not work for ICMP for IPv6
965205-1 3-Major   BIG-IP dashboard downloads unused widgets
965041-3 3-Major   SELinux permission issues leads to daemon startup failure
964941-2 3-Major   IPsec interface-mode tunnel does not initiate or respond after config change
964125-1 3-Major   Mcpd cores while processing a query for node statistics when there are thousands of FQDN nodes and pool members.
963541-1 3-Major   Net-snmp5.8 crash
963017-1 3-Major   The tpm-status-check service shows System Integrity Status: Invalid when Engineering Hotfix installed
960029-1 3-Major   Viewing properties for IPv6 pool members in the Statistics page in the GUI returns an error
959629-1 3-Major   Logintegrity script for restjavad/restnoded fails
959057-2 3-Major   Unable to create additional login tokens for the default admin user account
958833-2 3-Major   After mgmt ip change via GUI, brower is not redirected to new address
958601-1 3-Major   In the GUI, searching for virtual server addresses does not match address lists
958465-1 3-Major   in BIG-IP Virtual Edition, TMM may prematurely shut down during initialization
958353-1 3-Major   Restarting the mcpd messaging service renders the PAYG VE license invalid.
958093-4 3-Major   IPv6 routes missing after BGP graceful restart
957993-1 3-Major   Unable to set a port list in the GUI for an IPv6 address for a virtual server
956625-1 3-Major   Port and port-list type are both stored in a traffic-matching-criteria object
956589-3 3-Major   The tmrouted daemon restarts and produces a core file
956293-3 3-Major   High CPU from analytics-related REST calls - Dashboard TMUI
956109-1 3-Major   Modifying a traffic-matching-criteria with a port-list during a full sync may result in an incorrect configuration on the sync target
955953-1 3-Major   iRule command 'table' fails to resume when used with Diameter 'irule_scope_msg'
955897-1 3-Major   Upgrade failure with virtual-address in non-default route domain: fails to load config
953477-2 3-Major   Syncookie HW mode not cleared when modifying VLAN config.
950849-5 3-Major   B4450N blades report page allocation failure.
948717-2 3-Major   F5-pf_daemon_cond_restart uses excessive CPU
946745-1 3-Major   'System Integrity: Invalid' after Engineering Hotfix installation
946185-2 3-Major   Unable to view iApp component due to error 'An error has occurred while trying to process your request.'
946089-3 3-Major   BIG-IP might send excessive multicast/broadcast traffic.
945413-1 3-Major   Loop between keymgmtd and mcpd causes BIG-IP to be out of sync or in constant automatic config sync
943669-2 3-Major   B4450 blade reboot
943641-2 3-Major   IKEv1 IPsec in interface-mode may fail to establish after ike-peer reconfiguration
943577-1 3-Major   Full sync failure for traffic-matching-criteria with port list under certain conditions
943473-1 3-Major   LDAP monitor's test functionality has an incorrect and non-modifiable IP address field in GUI
943045-3 3-Major   Inconsistency in node object name and node IPv6 address when IPv6 pool-member is created without providing node object name.
941381-4 3-Major   MCP restarts when deleting an application service with a traffic-matching-criteria
940885-1 3-Major   Add support for Mellanox CX5 Ex adapter
940177-2 3-Major   Certificate instances tab shows incorrect number of instances in certain conditions
939249-2 3-Major   iSeries LCD changes to secure mode after multiple reboots
938145-2 3-Major   DAG redirects packets to non-existent tmm
936093-1 3-Major   Non-empty fipserr files loaded from a UCS archive can cause a FIPS BIG-IP platform to remain offline
935485-1 3-Major   BWC: flows might stall when using dynamic BWC policy
935177-1 3-Major   IPsec: Changing MTU or PMTU settings on interface mode tunnel cores tmm
934941-1 3-Major   Platform FIPS power-up self test failures not logged to console
934065-2 3-Major   The turboflex-low-latency and turboflex-dns are missing.
933329-1 3-Major   The process plane statistics do not accurately label some processes
932497-2 3-Major   Autoscale groups require multiple syncs of datasync-global-dg
931629-4 3-Major   External trunk fdb entries might end up with internal MAC addresses.
930825-5 3-Major   System should reboot (rather than restart services) when it sees a large number of HSB XLMAC errors
930741-3 3-Major   Truncated or incomplete upload of a BIG-IP image causes kernel lockup and reboot
928697-1 3-Major   Incorrect logging of proposal payloads from remote peer during IKE_SA_INIT
928389-1 3-Major   GUI become inaccessible after importing certificate under import type 'certificate'
928353-1 3-Major   Error logged installing Engineering Hotfix: Argument isn't numeric
928161-2 3-Major   Local password policy not enforced when auth source is set to a remote type.
925797-1 3-Major   Full config sync fails and mcpd memory usage is very high on the receiving device with thousands of FQDN pools members
924297-3 3-Major   Ltm policy MCP objects are not being synced over to the peer device
923745-4 3-Major   Ctrl-Alt-Del reboots the system
922885-1 3-Major K27872027 BIG-IP Virtual Edition does not pass traffic on ESXi 6.5
922613-3 3-Major   Tunnels using autolasthop might drop traffic with ICMP route unreachable
922297-1 3-Major   TMM does not start when using more than 11 interfaces with more than 11 vCPUs
922185-2 3-Major   LDAP referrals not supported for 'cert-ldap system-auth'
922153-1 3-Major   Tcpdump is failing on tmm 0.x interfaces
921149-4 3-Major   After applying static bandwidth controller on a virtual server, any changes to the virtual server disassociates the BWC policy
921121-5 3-Major   Tmm crash with iRule and a PEM Policy with BWC Enabled
920761-1 3-Major   Changing a virtual server type in the GUI may change some options; changing back to the original type does not restore original values
920517-1 3-Major   Rate Shaping Rate Class 'Queue Method' and 'Drop Policy' defaults are incorrect in the GUI
919401-1 3-Major   Disallow adding Request Adapt Profiles and Response Adapt Profiles to virtual servers in TMSH when ICAP is not licensed
919317-6 3-Major   NSM consumes 100% CPU processing nexthops for recursive ECMP routes
919185-1 3-Major   Request adapt and response adapt profile options should not be available in the GUI when ICAP is not licensed
918409-1 3-Major   BIG-IP i15600 / i15800 does not monitor all tmm processes for heartbeat failures
915829-3 3-Major   Particular Users unable to login with LDAP Authentication Provider
915825-1 3-Major   Configuration error caused by Drafts folder in a deleted custom partition while upgrading.
915557-1 3-Major   The pool statistics GUI page fails (General database error retrieving information.) when filtering on pool status.
915493-5 3-Major   imish command hangs when ospfd is enabled
914645-4 3-Major   Unable to apply LTM policies to virtual servers after running 'mount -a'
913849-2 3-Major   Syslog-ng periodically logs nothing for 20 seconds
913829-5 3-Major   i15000, i15800, i5000, i7000, i10000, i11000 and B4450 blades may lose efficiency when source ports form an arithmetic sequence
913573-3 3-Major   Unable to complete REST API PUT request for 'tm/ltm/data-group/internal' endpoint.
909505-4 3-Major   Creating LTM data group external object fails.
909485-4 3-Major   Deleting LTM data-group external object incorrectly reports 200 when object fails to delete
908753-2 3-Major   Password memory not effective even when password policy is configured
908601-1 3-Major   System restarts repeatedly after using the 'diskinit' utility with the '--style=volumes' option
907549-2 3-Major   Memory leak in BWC::Measure
906505-1 3-Major   Display of LCD System Menu cannot be configured via GUI on iSeries platforms
904713-1 3-Major   FailoverState device status and CM device status do not match shortly after triggering failover
904401-4 3-Major   Guestagentd core
903265-4 3-Major   Single user mode faced sudden reboot
901989-1 3-Major   Boot_marker writes to /var/log/btmp
900933-3 3-Major   IPsec interoperability problem with ECP PFS
900485-1 3-Major   Syslog-ng 'program' filter does not work
899933-1 3-Major   Listing property groups in TMSH without specifying properties lists the entire object
899085-7 3-Major   Configuration changes made by Certificate Manager role do not trigger saving config
898577-1 3-Major   Executing a command in "mgmt tm" using iControl REST results in tmsh error
893885-4 3-Major   The tpm-status command returns: 'System Integrity: Invalid' after Engineering Hotfix installation
892445-1 3-Major   BWC policy names are limited to 128 characters
891221-1 3-Major   Router bgp neighbor password CLI help string is not helpful
889029-1 3-Major   Unable to login if LDAP user does not have search permissions
888869-1 3-Major   GUI reports General Database Error when accessing Instances Tab of SSL Certificates
888081-5 3-Major   BIG-IP VE Migration feature fails for 1NIC
887117-3 3-Major   Invalid SessionDB messages are sent to Standby
887089-2 3-Major   Upgrade can fail when filenames contain spaces
886649-1 3-Major   Connections stall when dynamic BWC policy is changed via GUI and TMSH
886273-4 3-Major   Unanticipated restart of TMM due to heartbeat failure
884729-1 3-Major   The vCMP CPU usage stats are incorrect
883149-2 3-Major   The fix for ID 439539 can cause mcpd to core.
882833-1 3-Major   SELinux issue cause zrd down
882609-2 3-Major   ConfigSync status remains 'Disconnected' after setting ConfigSync IP to 'none' and back
881085-4 3-Major   Intermittent auth failures with remote LDAP auth for BIG-IP managment
880289-2 3-Major   FPGA firmware changes during configuration loads
879969-6 3-Major   FQDN node resolution fails if DNS response latency >5 seconds
879829-1 3-Major   HA daemon sod cannot bind to ports numbered lower than 1024
871705-7 3-Major   Restarting bigstart shuts down the system
867549-2 3-Major   LCD touch panel reports "Firmware update in progress" indefinitely
865225-5 3-Major   100G modules may not work properly in i15000 and i15800 platforms
862937-4 3-Major   Running cpcfg after first boot can result in daemons stuck in restart loop
862525-7 3-Major   GUI Browser Cache Timeout option is not available via tmsh
844925-4 3-Major   Command 'tmsh save /sys config' fails to save the configuration and hangs
839121-4 3-Major K74221031 A modified default profile that contains SSLv2, COMPAT, or RC2 cipher will cause the configuration to fail to load on upgrade
829821-8 3-Major   Mcpd may miss its high availability (HA) heartbeat if a very large amount of pool members are configured
828789-4 3-Major   Display of Certificate Subject Alternative Name (SAN) limited to 1023 characters
810613-6 3-Major   GUI Login History hides informative message about max number of lines exceeded
807945-4 3-Major   Loading UCS file for the first time not updating MCP DB
807837-1 3-Major   Upgrade fails when client-ssl inherits proxy-ca-key/cert with error message: Client SSL profile (/Common/child): must have at least one set of CA type cert-key-chain.
806881-7 3-Major   Loading the configuration may not set the virtual server enabled status correctly
803457-4 3-Major   SNMP custom stats cannot access iStats
798885-5 3-Major   SNMP response times may be long due to processing burden of requests
791365-4 3-Major   Bad encryption password error on UCS save
791061-6 3-Major   Config load in /Common removes routing protocols from other partitions
788645-6 3-Major   BGP does not function on static interfaces with vlan names longer than 16 characters.
781733-6 3-Major   SNMPv3 user name configuration allows illegal names to be entered
780745-4 3-Major   TMSH allows creation of duplicate community strings for SNMP v1/v2 access
778041-4 3-Major   tcpdump fails with an unclear message when the 'epva' option is used on non-epva platforms (directly or through 'all' option)
776489-6 3-Major   Remote authentication attempts to resolve only LDAP host against the first three name servers configured.
775845-5 3-Major   Httpd fails to start after restarting the service using the iControl REST API
775797-4 3-Major   Previously deleted user account might get authenticated
773577-6 3-Major   SNMPv3: When a security-name and a username are the same but have different passwords, traps are not properly crafted
773173-3 3-Major   LTM Policy GUI is not working properly
767305-6 3-Major   If the mcpd daemon is restarted by itself, some SNMP OIDs fail to return data the first time they are queried
764969-1 3-Major   ILX no longer supports symlinks in workspaces as of v14.1.0
762097-4 3-Major   No swap memory available after upgrading to v14.1.0 and above
760932-2 3-Major   Part of audit log messages are also in other logs when strings are long
760354-2 3-Major   Continual mcpd process restarts after removing big logs when /var/log is full
759737-4 3-Major   Control and Analysis Plane CPU usage statistics are inaccurate for single core vCMP guests
759258-6 3-Major   Instances shows incorrect pools if the same members are used in other pools
757787-4 3-Major   Unable to edit LTM Policies that belong to an Application Service (iApp) using the WebUI.
755976-5 3-Major   ZebOS might miss kernel routes after mcpd deamon restart
754335-4 3-Major   Install ISO does not boot on BIG-IP VE
751409-8 3-Major   MCP Validation does not detect when virtual servers differ only by overlapping VLANs
749757 3-Major   -s option in qkview help does not indicate maximum size
744924-3 3-Major   Bladed unit goes offline after UCS install
741702-1 3-Major   TMM crash
739820-8 3-Major   Validation does not reject IPv6 address for TACACS auth configuration
739118-6 3-Major   Manually modifying a self IP address in bigip_base.conf file and reloading the configuration results in routing misconfiguration
737739-3 3-Major   Bash shell still accessible for admin even if disabled
730852-5 3-Major   The tmrouted repeatedly crashes and produces core when new peer device is added
725646-1 3-Major   The tmsh utility cores when multiple tmsh instances are spawned and terminated quickly
692218-7 3-Major   Audit log messages sent from the primary blade to the secondaries should not be logged.
690928-2 3-Major   System posts error message: 01010054:3: tmrouted connection closed
675911-11 3-Major K13272442 Different sections of the GUI can report incorrect CPU utilization
662301-1 3-Major   'Unlicensed objects' error message appears despite there being no unlicensed config
658850-4 3-Major   Loading UCS with the platform-migrate parameter could unexpectedly set or unset management DHCP
615934-7 3-Major   Overwrite flag in various iControl key/certificate management functions is ignored and might result in errors.
538283-1 3-Major   iControl REST asynchronous tasks may block other tasks from running
499348-12 3-Major   System statistics may fail to update, or report negative deltas due to delayed stats merging
486712-8 3-Major   GUI PVA connection maximum statistic is always zero
469724-4 3-Major   When evaluation/demonstration features expire, features enabled by both evaluation and perpetual licenses also expire
431503-9 3-Major K14838 TMSH crashes in rare initial tunnel configurations
385013-1 3-Major   Certain user roles do not trigger a sync for a 'modify auth password' command
985953-4 4-Minor   GRE Transparent Ethernet Bridging inner MAC overwrite
976517-3 4-Minor   Tmsh run sys failover standby with a device specified but no traffic group fails
964533-1 4-Minor   Multiple session_process_pending_event_callback ERROR: could not send callback messages get logged in the tmm logs
962605-5 4-Minor   BIG-IP may go offline after installing ASU file with insufficient disk space
957461-1 4-Minor   Creating virtual server with IPv6 address or port list in destination should display source address in IPv6 format
955593-1 4-Minor   "none" missing from the error string when snmp trap is configured with an invalid network type
955057-1 4-Minor   UCS archives containing a large number of DNS zone files may fail to restore.
947865-1 4-Minor   Pam-authenticator crash - pam_tacplus segfault or sigabort in tac_author_read
944485-6 4-Minor   License activation through proxy server uses IP address in proxy CONNECT, not nameserver
943597-1 4-Minor   'Upper Bound' and 'Lower Bound' thresholds are not displayed in Connections line chart
939757-5 4-Minor   Deleting a virtual server might not trigger route-injection update.
939517-5 4-Minor   DB variable scheduler.minsleepduration.ltm changes to default value after reboot
929813-3 4-Minor   "Error loading object from cursor" while updating a client SSL profile
928665-3 4-Minor   Kernel nf_conntrack table might get full with large configurations.
927441-4 4-Minor   Guest user not able to see virtual server details when ASM policy attached
921369-3 4-Minor   Signature verification for logs fails if the log files are modified during log rotation
921065-2 4-Minor   BIG-IP systems not responding to DPD requests from initiator after failover
919861-2 4-Minor   Tunnel Static Forwarding Table does not show entries per page
915473-3 4-Minor   Accessing Dashboard page with AVR provisioned causes continuous audit logs
915141-1 4-Minor   Availability status of virtual server remains 'available' even after associated pool's availability becomes 'unknown'
911713-4 4-Minor   Delay in Network Convergence with RSTP enabled
910645-2 4-Minor   Upgrade error 'Parsing default XML files. Failed to parse xml file'
908453-4 4-Minor   Trunks with names longer than 32 characters update working-mbr-count in vCMP guests incorrectly
906449-1 4-Minor   Node, Pool Member, and Monitor Instance timestamps may be updated by config sync/load
901985-7 4-Minor   Extend logging for incomplete HTTP requests
901669-5 4-Minor   Error status in "show cm failover-status" after MGMT-IP change
899097-3 4-Minor   Existence of rewrite profile with HTTP profile response chunking mode 'sustain' always triggers client-side chunking
896693-5 4-Minor   Patch installation is failing for iControl REST endpoint.
896689-5 4-Minor   Asynchronous tasks can be managed via unintended endpoints
893813-4 4-Minor   Modifying pool enables address and port translation in TMUI
893093-1 4-Minor   An extraneous SSL CSR file in the /config/big3d or /config/gtm directory can prevent certain sections in the WebUI from showing.
882713-2 4-Minor   BGP SNMP trap has the wrong sysUpTime value
879189-4 4-Minor   Network map shows 'One or more profiles are inactive due to unprovisioned modules' in Profiles section
860573-4 4-Minor   LTM iRule validation performance improvement by tracking procedure/event that have been validated
817989-2 4-Minor   Cannot change managemnet IP from GUI
808481-6 4-Minor   Hertfordshire county missing from GTM Region list
807309-4 4-Minor   Incorrect Active/Standby status in CLI Prompt after failover test
805325-7 4-Minor   tmsh help text contains a reference to bigpipe, which is no longer supported
795429-6 4-Minor   Unrelated iControl REST transaction error message is returned when committing a transaction without any tasks.
759852-5 4-Minor   SNMP configuration for trap destinations can cause a warning in the log
759590-7 4-Minor   Creation of RADIUS authentication fails with service types other than 'authenticate only'
742753-6 4-Minor   Accessing the BIG-IP system's WebUI via special proxy solutions may fail
742105-4 4-Minor   Displaying network map with virtual servers is slow
713183-5 4-Minor   Malformed JSON files may be present on vCMP host
712241-7 4-Minor   A vCMP guest may not provide guest health stats to the vCMP host
696363-5 4-Minor   Unable to create SNMP trap in the GUI
689147-4 4-Minor   Confusing log messages on certain user/role/partition misconfiguration when using remote role groups
675772-3 4-Minor   IPsec tunnels fail when traffic-selectors share one IPsec interface mode policy
673573-7 4-Minor   tmsh logs boost assertion when running child process and reaches idle-timeout
658943-4 4-Minor   Errors when platform-migrate loading UCS using trunks on vCMP guest
646768-5 4-Minor K71255118 VCMP Guest CM device name not set to hostname when deployed
631083-6 4-Minor   Some files in home directory are overwritten on password change
603693-1 4-Minor K52239932 Brace matching in switch statement of iRules can fail if literal strings use braces
528894-5 4-Minor   Config sync after sub-partition config changes results extra lines in the partition's conf file
472645-3 4-Minor   Memory issues when there is a lot of data in /var/annotate (annotations for dashboard)
965457-5 5-Cosmetic   OSPF duplicate router detection might report false positives
964421-1 5-Cosmetic   Error '01070734:3: Configuration error: Signing key and signing certificate must be set simultaneously'


Local Traffic Manager Issues

ID Number Severity Solution Article(s) Description
968929-1 2-Critical   Http_send_fallback_response_func seg fault
967249-1 2-Critical   TMM may leak memory early during its startup process, and may continue to do so indefinitely.
949137-2 2-Critical   Clusterd crash and vCMP guest failover
945997-1 2-Critical   LTM policy applied to HTTP/2 traffic may crash TMM
942185-1 2-Critical   Non-mirrored persistence records may accumulate over time
938545-2 2-Critical   Oversize plugin Tcl object results can result in 0-length messages and plugin crash
937649-1 2-Critical   Flow fwd broken with statemirror.verify enabled and source-port preserve strict
935193-2 2-Critical   With APM and AFM provisioned, single logout ( SLO ) fails
927633-1 2-Critical   Failure path in external datagroup internal mapping operation failure may result in 'entry != NULL' panic
926985-1 2-Critical   HTTP/3 aborts stream on incomplete frame headers
914309-4 2-Critical   TMM crash seen with FTP and Classification profiles
911041-4 2-Critical   Suspending iRule FLOW_INIT on a virtual-to-virtual flow leads to a crash
910213-1 2-Critical   LB::down iRule command is ineffective, and can lead to inconsistent pool member status
886045-1 2-Critical   Multi-NIC instances fail to come up when trying to use memory-mapped virtio device
862885-3 2-Critical   Virtual server-to-virtual server with 'Tail Loss Probe' enabled can result in 'no trailing data' error
851385-2 2-Critical   Failover takes too long when traffic blade failure occurs
835505-5 2-Critical   Tmsh crash potentially related to NGFIPS SDK
824437-8 2-Critical   Chaining a standard virtual server and an ipother virtual server together can crash TMM.
797573-2 2-Critical   TMM assert crash with resulting in core generation in multi-blade chassis
758491-4 2-Critical   When using NetHSM integration, after upgrade to 14.1.0 or later (or creating keys using fipskey.nethsm), BIG-IP cannot use the keys
738964-5 2-Critical   Instruction logger debugging enhancement
625807-2 2-Critical   Tmm cores in bigproto_cookie_buffer_to_server
985925-2 3-Major   Ipv6 Routing Header processing not compatible as per Segments Left value.
985749-2 3-Major   TCP exponential backoff algorithm does not comply with RFC 6298
985433-1 3-Major   Insertion of the X-Forwarded-For HTTP header can fail, causing the client's connection to be reset.
985401-2 3-Major   ProxySSL virtual servers should work with web acceleration (ramcache) profiles attached
984897-2 3-Major   Some connections performing SSL mirroring are not handled correctly by the Standby unit.
980821-3 3-Major   Traffic is processed by All Port Virtual Server instead of Specific Virtual Server that is configured.
978833-1 3-Major   Use of CRL-based Certificate Monitoring Causes Memory Leak
976101-3 3-Major   TMM crash after deleting an interface from a virtual wire vlan
975725-4 3-Major   Wildcard virtual servers do not forward L3 unicast traffic sent to L2 broadcast
971217-1 3-Major   AFM HTTP security profiles may treat POST requests with Content-Length: 0 as "Unparsable Request Content" violations.
969637-1 3-Major   Config load failed with "FIPS 140 operations not available on this system" after upgrade to 15.1.1
968949-6 3-Major   Keepalives aren't sent in FIN_WAIT_2 when using a TCP profile
968641 3-Major   Fix for zero LACP priority
967425-1 3-Major   mcp error: 0x1020036 at ../mcp/db_pool.c:461
967353-2 3-Major   HTTP proxy should trim spaces between a header field-name and colon in its downstream responses.
967093-2 3-Major   In SSL forward proxy when the signing CA cert and end-entity cert has a different signature algorithm, the SSL connection may fail
965037-2 3-Major   SSL Orchestrator does not send HTTP CONNECT tunnel payload to services
963705-4 3-Major   Proxy ssl server response not forwarded
962913-5 3-Major   The number of native open connections in the SSL profile is higher than expected
961653-3 3-Major   Unable to retrieve DNS link statistics via SNMP OID gtmLinkStatRate
961001-1 3-Major   Arp requests not resolved for snatpool members when primary blade goes offline
958785-7 3-Major   FTP data transfer does not complete after QUIT signal
955617-1 3-Major   Cannot modify the destination address of a monitor
950005-1 3-Major   TCP connection is not closed when necessary after HTTP::respond iRule
948065-2 3-Major   DNS Responses egress with an incorrect source IP address.
947125-1 3-Major   Unable to delete monitors after certain operations
945601-5 3-Major   An incorrect LTM policy rule may be matched when a policy consists of multiple rules with TCP address matching conditions.
945189-4 3-Major   HTTPS monitor fails due to missing ECDHE-RSA-AES256-CBC-SHA
944173-1 3-Major   SSL monitor stuck does not change TLS version
942489-2 3-Major   TCP proxy with ramcache and OneConnect can result in out-of-order events which stalls the flow
942217-4 3-Major   Virtual server keeps rejecting connections for rstcause 'VIP down' even though virtual status is 'available'
941481-1 3-Major   iRules LX - nodejs processes consuming more memory on vCMP guest secondary slot
941257-4 3-Major   Occasional Nitrox3 ZIP engine hang
940665-2 3-Major   DTLS 1.0 support for PFS ciphers
939961-1 3-Major   TCP connection is closed when necessary after HTTP::respond iRule.
938309-1 3-Major   In-TMM Monitors time out unexpectedly
937769-1 3-Major   SSL connection mirroring failure on standy with sslv2 records
937573-2 3-Major   Connections drop in virtual server with Immediate Action On Service Down set to Drop
936441-1 3-Major   Nitrox5 SDK driver logging messages
935793-1 3-Major   With mirroring enabled on a SIP virtual server, connections on the standby are reset with MBLB internal error (Routing problem)
934697-4 3-Major   Route domain not reachable (strict mode)
932857-1 3-Major   Delays marking Nodes or Pool Members DOWN with in-TMM monitoring
932461-4 3-Major   Cert update on server SSL profile on HTTPS monitor: BIG-IP not using the updated certificate.
928857-1 3-Major   Use of OCSP responder may leak X509 store instances
928805-1 3-Major   Use of OCSP responder may cause memory leakage
928789-1 3-Major   Use of OCSP responder may leak SSL handshake instances
927713-3 3-Major   Secondary blade IPsec SAs lost after standby reboot using clsh reboot
927589-2 3-Major   ILX::call command response get truncated
927569-1 3-Major   HTTP/3 rejects subsequent partial SETTINGS frames
926929-4 3-Major   RFC Compliance Enforcement lacks configuration availability
926757-3 3-Major   ICMP traffic to a disabled virtual-address might be handled by a virtual-server.
926513-1 3-Major   HTTP/2 clone pool fails to receive traffic with the clone pool (server) option selected.
922641-5 3-Major   Any iRules that park in a clientside or serverside command leave the iRule attached to the wrong flow
922413-1 3-Major   Excessive memory consumption with ntlmconnpool configured
921881-1 3-Major   Use of IPFIX log destination can result in increased CPU utilization
921541-2 3-Major   When certain sized payloads are gzipped, the resulting payload is chunked, incorrect, and is never delivered to the client due to missing end of chunk marker.
920789-1 3-Major   UDP commands in iRules executed during FLOW_INIT event fail
920205-3 3-Major   Rate shaping might suppress TCP RST
918277-1 3-Major   Slow Ramp does not take into account pool members' ratio weights
915773-3 3-Major   Restart of TMM after stale interface reference
914061-1 3-Major   BIG-IP may reject a POST request if it comes first and exceeds the initial window size
913385-2 3-Major   TMM generates core while deleting iFiles
912517-1 3-Major   MySQL monitor marks pool member down if 'send' is configured but no 'receive' strings are configured
912425-4 3-Major   Modification of in-tmm monitors may result in crash
912293-4 3-Major   Persistence might not work properly on virtual servers that utilize address lists
911777-1 3-Major   BIG-IP SSL forward proxy might drop connection to servers with revoked certificate status.
910673-1 3-Major   Nethsm-thales-install.sh installation fails with error 'Could not reach Thales HSM'
910273-1 3-Major   SSL Certificate version always displays as '1' in the GUI
910105 3-Major   Partial HTTP/2 payload may freeze on the BIG-IP system
909997-2 3-Major   Virtual server status displays as unavailable when it is accepting connections
909677-1 3-Major   HTTP/2 full proxy always sets the :scheme pseudo-header for HTTPS requests where the server-side connection is not encrypted
907177-1 3-Major   Priority of embedded APM iRules is ignored
906653-2 3-Major   Server side UDP immediate idle-timeout drops datagrams
905477-1 3-Major   The sdmd daemon cores during config sync when multiple devices configured for iRules LX
904625-1 3-Major   Changes to SSL.CertRequest.* DB variables cause high availability (HA) devices go out of sync
904041-1 3-Major   Ephemeral pool members may be incorrect when modified via various actions
903581-4 3-Major   The pkcs11d process cannot recover under certain error condition
902377-3 3-Major   HTML profile forces re-chunk even though HTML::disable
901569-3 3-Major   Loopback traffic might get dropped when VLAN filter is enabled for a virtual server.
898733-4 3-Major   SSL handshakes fail on secondary blades for Thales keys created with fipskey.nethsm after upgrade to 14.1.x and re-import of the keys from HSM
898685-5 3-Major   Order of ciphers changes after updating cipher group
897185-4 3-Major   Resolver cache not using random port distribution
895205-1 3-Major   A circular reference in rewrite profiles causes MCP to crash
895165-1 3-Major   Traffic-matching-criteria with "any" protocol overlaps with explicit protocols
893281-2 3-Major   Possible ssl stall on closed client handshake
892801-1 3-Major   When an Internal Virtual Server is created without an existing 0.0.0.0 virtual address, it will have the state "disabled-by-parent"
892485-3 3-Major   A wrong OCSP status cache may be looked up and re-used during SSL handshake.
891373-1 3-Major   BIG-IP does not shut a connection for a HEAD request
891145-6 3-Major   TCP PAWS: send an ACK for half-open connections that receive a SYN with an older TSVal
889165-4 3-Major   "http_process_state_cx_wait" errors in log and connection reset
888517-1 3-Major   Network Driver Abstraction Layer (NDAL) busy polling leads to high CPU.
887045-2 3-Major   The session key does not get mirrored to standby.
885325-1 3-Major   Stats might be incorrect for iRules that get executed a large number of times
883049-1 3-Major   Statsd can deadlock with rrdshim if an rrd file is invalid
882709-5 3-Major   Traffic does not pass on tagged VLANs on VE configured on Hyper-V hypervisors in this release
882549-1 3-Major   Sock driver does not use multiple queues in unsupported environments
881065-3 3-Major   Adding port-list to Virtual Server changes the route domain to 0
879169-1 3-Major   RESOLV::lookup @<virtual server name> may not work
872981-4 3-Major   MCP crashes when deleting a virtual server and its traffic-matching-criteria in the same transaction
870349-2 3-Major   Continuous restart of ntlmconnpool after license reinstall
870309-3 3-Major   Ephemeral pool member not created when FQDN resolves to new IP address
867985-5 3-Major   LTM policy with a 'shutdown' action incorrectly allows iRule execution
862001-7 3-Major   Improperly configured NTP server can result in an undisciplined clock stanza
858701-5 3-Major   Running config and saved config are having different route-advertisement values after upgrading from 11.x/12.x
854129-1 3-Major   SSL monitor continues to send previously configured server SSL configuration after changes (removal/modification)
852325-6 3-Major   HTTP2 does not support Global SNAT
851121-1 3-Major   Database monitor DBDaemon debug logging not enabled consistently
846977-6 3-Major   TCP:collect validation changed in 12.0.0: the first argument can no longer be zero
843317-4 3-Major   The iRules LX workspace imported with incorrect SELinux contexts
842137-2 3-Major   Keys cannot be created on module protected partitions when strict FIPS mode is set
819329-5 3-Major   Specific FIPS device errors will not trigger failover
816953-2 3-Major   RST_STREAM is sent in closed state on a serverside stream in HTTP/2 full proxy
815405-5 3-Major   GUI update of Child FastL4 profile overwrites CLI-only customized settings (options that are not available in GUI)
808017-6 3-Major   When using a variable as the only parameter to the iRule persist command, the iRule validation fails
805561-2 3-Major   Change of pool configuration in one-connect environment can impact active traffic
795933-8 3-Major   A pool member's cur_sessions stat may incorrectly not decrease for certain configurations
794505-6 3-Major   OSPFv3 IPv4 address family route-map filtering does not work
794417-5 3-Major   Modifying enforce-tls-requirements to enabled on the HTTP/2 profile when renegotiation is enabled on the client-ssl profile should cause validation failure but does not
794385-4 3-Major   BGP sessions may be reset after CMP state change
793669-6 3-Major   FQDN ephemeral pool members on high availability (HA) pair does not get properly synced of the new session value
785877-4 3-Major   VLAN groups do not bridge non-link-local multicast traffic.
785361-2 3-Major   In L2wire mode packets from srcIP 0.0.0.0 will be silently dropped
780857-1 3-Major   HA failover network disruption when cluster management IP is not
779137-6 3-Major   Using a source address list for a virtual server does not preserve the destination address prefix
778501-3 3-Major   LB_FAILED does not fire on failure of HTTP/2 server connection establishment
767341-8 3-Major   If the size of a filestore file is smaller than the size reported by mcp, tmm can crash while loading the file.
767217-4 3-Major   Under certain conditions when deleting an iRule, an incorrect dependency error is seen
766593-6 3-Major   RESOLV::lookup with bytes array input does not work when length is exactly 4, 16, or 20
757029-7 3-Major   Ephemeral pool members may not be created after config load or reboot
756812-4 3-Major   Nitrox 3 instruction/request logger may fail due to SELinux permission error
756313-8 3-Major   SSL monitor continues to mark pool member down after restoring services
755791-7 3-Major   UDP monitor not behaving properly on different ICMP reject codes.
755631-6 3-Major   UDP / DNS monitor marking node down
754604-5 3-Major   iRule : [string first] returns incorrect results when string2 contains null
753526-8 3-Major   IP::addr iRule command does not allow single digit mask
751451-1 3-Major   When upgrading to v14.0.0 or later, the 'no-tlsv1.3' option is missing from HTTPS monitors automatically created server SSL profiles
748886-1 3-Major   Virtual server stops passing traffic after modification
723112-7 3-Major   LTM policies does not work if a condition has more than 127 matches
705387-4 3-Major   HTTP/2, ALPN and SSL
700639-1 3-Major   The default value for the syncookie threshold is not set to the correct value
699758-3 3-Major   Intermittent connection resets are seen in HTTP/2 gateway when HTTP/2 preface is sent to server
696755-6 3-Major   HTTP/2 may truncate a response body when served from cache
574762-3 3-Major   Forwarding flows leak when a routing update changes the egress vlan
315765-1 3-Major   The BIG-IP system erroneously performs a SNAT translation after the SNAT translation address has been disabled.
987885-5 4-Minor   Half-open unclean SSL termination might not close the connection properly
987401-3 4-Minor   Increased TMM memory usage on standby unit after pool flap
982993-5 4-Minor   Gateway ICMP monitors with IPv6 destination and IPV6 transparent nexthop might fail
962433-5 4-Minor   HTTP::retry for a HEAD request fails to create new connection
962333-1 4-Minor   FIN from client does not get propagated to server side, if the FIN arrives before server side reaching ESTABLISHED
962181-1 4-Minor   iRule POLICY command fails in server-side events
962177-1 4-Minor   Results of POLICY::names and POLICY::rules commands may be incorrect
956025-1 4-Minor   HTTP profile response-chunking "unchunk" option does not remove Content-Length from response header
949721-1 4-Minor   QUIC does not send control frames in PTO packets
947937-1 4-Minor   HTTP iRule commands may fail to execute within the "fallback-host" HTTP profile field.
947745-2 4-Minor   Tcp proxy does not ignore HUDEVT_CHILD_CONNECTED and gives an error
942793-2 4-Minor   BIG-IP system cannot accept STARTTLS command with trailing white space
940837-3 4-Minor   The iRule command node is not triggered in CLIENT_ACCEPTED with HTTP/2.
936557-1 4-Minor   Retransmissions of the initial SYN segment on the BIG-IP system's server-side incorrectly use a non-zero acknowledgement number when Verified Accept is enabled.
932553-5 4-Minor   An HTTP request is not served when a remote logging server is down
932045-4 4-Minor   Memory leak with umem_alloc_80 through creating/deleting LTM node object
931469-8 4-Minor   Redundant socket close when half-open monitor pings
929429-1 4-Minor   Oracle database monitor uses excessive CPU when Platform FIPS is licensed
922005-2 4-Minor   Stats on a certain counter for web-acceleration profile may show excessive value
921993-2 4-Minor   LTM policy with a 'contains' operator does not work as expected when using an external data group.
921477-1 4-Minor   Health monitors may fail when the HTTP RFC Compliance option is enabled in a dual BIG-IP setup.
916485-3 4-Minor   Tmsh install sys crypto key (SafeNet) command creates a duplicate mcp object
915969-2 4-Minor   Truncated QUIC connection close reason
914589-1 4-Minor   VLAN Failsafe timeout is not always respected
912945-1 4-Minor   A virtual server with multiple client SSL profiles, the profile with CN or SAN of the cert matching the SNI is not selected if cert is ECDSA signed
911853-6 4-Minor   Stream filter chunk-size limits filter to a single match per ingress buffer
910965-1 4-Minor   Overflow of Multicast table filling the tmm log
907045-1 4-Minor   QUIC HANDSHAKE_DONE is sent at the end of first flight
901485-1 4-Minor   HTTP_RESPONSE_RELEASE is not raised for HTTP early response
898753-6 4-Minor   Multicast control-plane traffic requires handling with AFM policies
898201-1 4-Minor   Fqdn nodes are not getting populated after BIG-IP reboot when DNS server is accessed through a local virtual server.
895557-3 4-Minor   NTLM profile logs error when used with profiles that do redirect
890881-5 4-Minor   ARP entry in the FDB table is created on VLAN group when the MAC in the ARP reply differs from Ethernet address
869565-2 4-Minor   Disabling of HTTP/2 profile on server side does not prevent h2 in ALPN
869553-2 4-Minor   HTTP2::disable fails for server side allowing HTTP/2 traffic
829021-2 4-Minor   BIG-IP does not account a presence of http2 profile when response payload is modified
822245-1 4-Minor   Large number of in-TMM monitors results in some monitors being marked down
807397-4 4-Minor   IRules ending with a comment cause config verification to fail
804157-4 4-Minor   ICMP replies are forwarded with incorrect checksums causing them to be dropped
802721-5 4-Minor   Virtual Server iRule does not match an External Data Group key that's 128 characters long
760590-5 4-Minor   TCP Verified-Accept with proxy-mss enabled does not honor the route-metrics cache when sending the SYN to the server
758435-3 4-Minor   Ordinal value in LTM policy rules sometimes do not work as expected
743253-1 4-Minor   TSO in software re-segments L3 fragments.
717806-6 4-Minor   In the case of 'n' bigd instances, uneven CPU load distribution is seen when a high number of monitors are configured
640374-3 4-Minor   DHCP statistics are incorrect
968581-1 5-Cosmetic   TMSH option max-response for "show /ltm profile ramcache" command may not comply with its description
898929-5 5-Cosmetic   Tmm might crash when ASM, AVR, and pool connection queuing are in use
897437-6 5-Cosmetic   First retransmission might happen after syn-rto-base instead of minimum-rto.
873249-6 5-Cosmetic   Switching from fast_merge to slow_merge can result in incorrect tmm stats
860277-5 5-Cosmetic   Default value of TCP Profile Proxy Buffer High Low changed in 14.1


Performance Issues

ID Number Severity Solution Article(s) Description
948417-3 3-Major   Network Management Agent (Azure NMAgent) updates causes Kernel Panic


Global Traffic Manager (DNS) Issues

ID Number Severity Solution Article(s) Description
940733-4 2-Critical   Downgrading a FIPS-enabled BIG-IP system results in a system halt
931149-2 2-Critical   Some RESOLV::lookup queries, including PTR lookups for RFC1918 addresses, return empty strings
918597-6 2-Critical   Under certain conditions, deleting a topology record can result in a crash.
913729-6 2-Critical   Support for DNSSEC Lookaside Validation (DLV) has been removed.
887681-4 2-Critical   Tmm SIGSEGV in rrset_array_lock,services/cache/rrset.c
850509-4 2-Critical   Zone Trusted Signature inadequately maintains following change of master key
264701-6 2-Critical K10066 GTM: zrd exits on error from bind about .jnl file error (Formerly CR 68608)
987709-5 3-Major   Static target string as CNAME pool member might cause config load failure if wide IP with same name exists in another partition
982361-2 3-Major   SNAT on wildcard virtual server does not work
977625-2 3-Major   GTM persistence records linger in tmm
973341-1 3-Major   Customized device certs will break scripts relying on /config/httpd/conf/ssl.crt/server.crt
973261-1 3-Major   GTM HTTPS monitor w/ SSL cert fails to open connections to monitored objects
971297-1 3-Major   DNSKEYS Type changed from external to internal and Keys are not stored in HSM after upgrade
969553-1 3-Major   DNS cache returns SERVFAIL
967737-1 3-Major   DNS Express: SOA stops showing up in statistics from second zone transfer
966461-7 3-Major   Tmm leaks memory after each DNSSEC query when netHSM is not connected
965053-4 3-Major   [Regression of ID787881 & ID761032] DNSX fails to sign zone transfer using tsig key after failure
958325-2 3-Major   Updating DNS pool monitor via transaction leaves dangling monitor_rule in MCP DB
958157-4 3-Major   Hash collisions in fastDNS packet processing
940469-1 3-Major   Unsupported option in /etc/resolv.conf causes failure to sync DNS Zone configuration
936777-1 3-Major   Old local config is synced to other devices in the sync group.
936417-4 3-Major   DNS/GTM daemon big3d does not accept ECDH or DH ciphers
936361-2 3-Major   IPv6-based bind (named) views do not work
935945-2 3-Major   GTM HTTP/HTTPS monitors cannot be modified via GUI
935249-1 3-Major   GTM virtual servers have the wrong status
920817-7 3-Major   DNS Resource Records can be lost in certain circumstances
918693-5 3-Major   Wide IP alias validation error during sync or config load
913917-1 3-Major   Unable to save UCS
912761-1 3-Major   Link throughput statistics are different
912001-2 3-Major   TMM cores on secondary blades of the Chassis system.
911241-7 3-Major   The iqsyncer utility leaks memory for large bigip_gtm.conf file when log.gtm.level is set to debug
908829-2 3-Major   The iqsyncer utility may not write the core file for system signals
908801-2 3-Major   SELinux policies may prevent from iqsh/iqsyncer dumping core
903521-1 3-Major   TMM fails to sign responses from BIND when BIND has 'dnssec-enable no'
899253-1 3-Major   [GUI] GTM wideip-pool-manage in GUI fails when tens of thousands of pools exist
894081-1 3-Major   The Wide IP members view in the WebUI may report the incorrect status for a virtual server.
864797-3 3-Major   Cached results for a record are sent following region modification
863917-1 3-Major   The list processing time (xx seconds) exceeded the interval value. There may be too many monitor instances configured with a xx second interval.
858973-5 3-Major   DNS request matches less specific WideIP when adding new wildcard wideips
847105-1 3-Major   The bigip_gtm.conf is reverted to default after rebooting with license expired
959613-1 4-Minor   SIP/HTTPS monitor attached to generic-host virtual server and pool shows 'blank' reason
947217-6 4-Minor   Fix of ID722682 prevents GTM config load when the virtual server name contains a colon
886145-1 4-Minor   The 'Reconnect' and 'Reconnect All' buttons do not work if reached via a particular section of the DNS GUI.
885201-1 4-Minor   BIG-IP DNS (GTM) monitoring: 'CSSLSocket:: Unable to get the session"'messages appearing in gtm log
857953-1 4-Minor   Non-functional disable/enable buttons present in GTM wide IP members page
839361-7 4-Minor   iRule 'drop' command does not drop packets when used in DNS_RESPONSE
708680-4 4-Minor   TMUI is unable to change the Alias Address of DNS/GTM Monitors
985001-4 5-Cosmetic   Taiwan, Hong Kong, and Macau Are Defined As Countries in DNS/GTM Topology Definition


Application Security Manager Issues

ID Number Severity Solution Article(s) Description
965229-1 2-Critical   ASM Load hangs after upgrade
962341-5 2-Critical   BD crash on JSON payload
956889-1 2-Critical   /var fills up very quickly
904593-3 2-Critical   Configuration overwritten when using Cloud Auto Scaling template and ASM Automatic Live Update enabled
887621-3 2-Critical   ASM virtual server names configuration CRC collision is possible
854001-1 2-Critical   TMM might crash in case of trusted bot signature and API protected url
986937-2 3-Major   Cannot create child policy when the signature staging setting is not equal in template and parent policy
981069-2 3-Major   Reset cause: "Internal error (ASM requested abort (payload release error))"
974985-1 3-Major   Dosl7/bot does not ignore non-http traffic even when disabled via iRule DOSL7::disable
974513-1 3-Major   Dropped requests are reported as blocked in Reporting/charts
966613-5 3-Major   Cannot create XML profile based on WSDL when wsdl contains empty soap:address – getting error ‘Column 'object_uri' cannot be null’
965785-1 3-Major   Active/Standby sync process fails to populate table DCC.HSL_DATA_PROFILES on standby machine
963485-2 3-Major   Performance issue with data guard
963461-2 3-Major   ASM performance drop on the response side
962589-3 3-Major   Full Sync Requests Caused By Failed Relayed Call to delete_suggestion
962497-1 3-Major   BD crash after ICAP response
962493-6 3-Major   Request is not logged
962489-6 3-Major   False positive enforcement of parameters with specific configuration
961509-1 3-Major   ASM blocks websocket frames with signature matched but Transparent policy
960369-1 3-Major   Negative value suggested in Traffic Learning as max value
956373-1 3-Major   ASM sync files not cleaned up immediately after processing
955017-1 3-Major   Excessive CPU consumption by asm_config_event_handler
947341-2 3-Major   Mysql generates multiple error 24 (too many files open) for PRX.REQUEST_LOG DB tables files
943441-1 3-Major   Issues in verification of Bot Defense with F5 Anti-Bot Mobile SDK
928717-4 3-Major   [ASM - AWS] - ASU fails to sync
923221-2 3-Major   BD does not use all the CPU cores
922261-1 3-Major   WebSocket server messages are logged even it is not configured
920197-4 3-Major   Brute force mitigation can stop mitigating without a notification
914277-1 3-Major   [ASM - AWS] - Auto Scaling BIG-IP systems overwrite ASU
913761-1 3-Major   Security - Options section in navigation menu is visible for only Administrator users
912089-1 3-Major   Some roles are missing necessary permission to perform Live Update
907337-1 3-Major   BD crash on specific scenario
907025-4 3-Major   Live update error" 'Try to reload page'
898825-1 3-Major   Attack signatures are enforced on excluded headers under some conditions
898741-1 3-Major   Missing critical files causes FIPS-140 system to halt upon boot
891181-1 3-Major   Wrong date/time treatment in logs in Turkey/Istambul timezone
890825-1 3-Major   Attack Signatures and Threat Campaigns filter incorrect behaviour
888289-7 3-Major   Add option to skip percent characters during normalization
887265-3 3-Major   BIG-IP may fail to come online after upgrade with ASM and VLAN-failsafe configuration
867777-4 3-Major   Remote syslog server cannot parse violation detail buffers as UTF-8.
830341-3 3-Major   False positives Mismatched message key on ASM TS cookie
785873-4 3-Major   ASM should treat 'Authorization: Negotiate TlR' as NTLM
703678-4 3-Major   Cannot add 'secure' attributes to several ASM cookies
673272-1 3-Major   Search by "Signature ID is" does not return results for some signature IDs
984521-3 4-Minor   Accept-Encoding header is stripped by Bot Defense profile in case of incompatible file extension and a dot in the file name
974409-3 4-Minor   False Positive "Surfing Without Human Interaction"
964897-1 4-Minor   Live Update - Indication of "Update Available" when there is no available update
957321-2 4-Minor   When BIG-IP contains an invalid DNS Resolver, Bot Defense might wrongly classify search engines as malicious
956105-1 4-Minor   Websocket URLs content profiles are not created as expected during JSON Policy import
952509-3 4-Minor   Cross origin AJAX requests are blocked in case there is no Origin header
950953-2 4-Minor   Browser Challenges update file cannot be installed after upgrade
941929-3 4-Minor   Google Analytics shows incorrect stats, when Google link is redirected.
941625-2 4-Minor   BD sometimes prints errors related to TS cookie building
938293-1 4-Minor   importing a JSON policy with Application Language "auto-detect" changes to 'utf8' policy
937541-1 4-Minor   Wrong display of signature references in violation details
932893-1 4-Minor   Content profile cannot be updated after redirect from violation details in Request Log
931033-2 4-Minor   Device ID Deletions anomaly might be raised in case of browser/hardware change
922785-1 4-Minor   Live Update scheduled installation is not installing on set schedule
918097-4 4-Minor   Cookies set in the URI on Safari
915133-2 4-Minor   Single Page Application can break the page, when hooking is done by the end server application.
911729-3 4-Minor   Redundant learning suggestion to set a Maximum Length when parameter is already at that value
907997-1 4-Minor   Source Policy Name instead of Current Policy used in Restore Policy Version
905669-1 4-Minor   CSRF token expired message for AJAX calls is displayed incorrectly
893905-1 4-Minor   Wrong redirect from Charts to Requests Log when request status selected in filter
887625-4 4-Minor   Note should be bold back, not red
882729-4 4-Minor   Applied Blocking Masks discrepancy between local/remote event log
746984-6 4-Minor   False positive evasion violation
908173-1 5-Cosmetic   Empty fields are shown in the policy version history


Application Visibility and Reporting Issues

ID Number Severity Solution Article(s) Description
949593-4 3-Major   Unable to load config if AVR widgets were created under '[All]' partition
933777-4 3-Major   Context use and syntax changes clarification
932485-4 3-Major   Incorrect sum(hits_count) value in aggregate tables
932189-2 3-Major   Incorrect BD Swap Size units on ASM Resources chart
932137-6 3-Major   AVR data might be restored from non-relevant files in /shared/avr_afm partition during upgrade
924945-4 3-Major   Fail to detach HTTP profile from virtual server
913085-2 3-Major   Avrd core when avrd process is stopped or restarted
909161-2 3-Major   A core file is generated upon avrd process restart or stop
898333-1 3-Major   Unable to collect statistics from BIG-IP system after BIG-IQ restart
869049-3 3-Major   Charts discrepancy in AVR reports
787677-6 3-Major   AVRD stays at 100% CPU constantly on some systems
950305-1 4-Minor   Analytics data not displayed for Pool Names
948113-2 4-Minor   User-defined report scheduling fails
915005-2 4-Minor   AVR core files have unclear names
910777-2 4-Minor   Sending ASM report via AWS SES failed duo to wrong content type
930217-2 5-Cosmetic   Zone colors in ASM swap usage graph are incorrect


Access Policy Manager Issues

ID Number Severity Solution Article(s) Description
971065-1 2-Critical   Using ACCESS::log iRule command in RULE_INIT event makes TMM crash
965777-1 2-Critical   Per-request policy authentication becomes unresponsive
904441-1 2-Critical   APM vs_score for GTM-APM load balancing is not calculated correctly
860617-4 2-Critical   Radius sever pool without attaching the load balancing algorithm will result into core
978649 3-Major   Citrix Connection fails with Dell Wyse Client on 16.0.0.1
965837-3 3-Major   When BIG-IP is configured with PingAccess profile, tmm can core when there is an active connection
962069 3-Major   Memory leak in APM OCSP auth module
956645-3 3-Major   Per-request policy execution may timeout.
949477-3 3-Major   NTLM RPC exception: Failed to verify checksum of the packet
949105-1 3-Major   Error log seen on Category Lookup SNI requests for same connection
942729-1 3-Major   Export of big Access Policy config from GUI can fail
932213-3 3-Major   Local user db not synced to standby device when it is comes online after forced offline state
924857-3 3-Major   Logout URL with parameters resets TCP connection
924697-1 3-Major   VDI data plane performance degraded during frequent session statistic updates
924521-4 3-Major   OneConnect does not work when WEBSSO is enabled/configured.
907873-1 3-Major   Authentication tab is missing in VPE for RDG-RAP Access Policy type
903573-2 3-Major   AD group cache query performance
896125-1 3-Major   Reuse Windows Logon Credentials feature does not work with modern access policies
891613-2 3-Major   RDP resource with user-defined address cannot be launched from webtop with modern customization
883577-5 3-Major   ACCESS::session irule command does not work in HTTP_RESPONSE event
842149-3 3-Major   Verified Accept for SSL Orchestrator
788473-4 3-Major   Email sent from APM is not readable in some languages
752077-3 3-Major   Kerberos replay cache leaks file descriptors
744316-7 3-Major   Config sync of APM policy fails with Cannot update_indexes validation error.
738865-7 3-Major   MCPD might enter into loop during APM config validation
738547-5 3-Major   SAML Sax Parser returns error when importing metadata file that contains certain UTF-8 encoded characters other than ASCII
680855-5 3-Major   Safari 11 sometimes start more than one session
597955-4 3-Major   APM can generate seemingly spurious error log messages
554228-10 3-Major   OneConnect does not work when WEBSSO is enabled/configured.
974837-4 4-Minor K25173042 Browser-based VPN may not establish first time after upgrade.
958201 4-Minor   'Restrict to Single Client IP' option is missing in VMware iApp.
944093-1 4-Minor   Maximum remaining session's time on user's webtop can flip/flop
943033-1 4-Minor   APM PRP LDAP Group Lookup agent has a syntax error in built in VPE expression
867705-5 4-Minor   URL for IFRAME element may not be normalized in some cases
866953-4 4-Minor   Portal Access: F5_Inflate_onclick wrapper functionality needs refining
860041-5 4-Minor   Portal Access: 5_Deflate_removeEventListener wrapper need to be added
848217-5 4-Minor   Portal Access: default port encoded in rewritten url, need to be removed from host header in request to backend
840257 4-Minor   Portal Access: HTML iframe sandbox attribute is not supported
840249-1 4-Minor   With BIG-IP as a SAML IdP, important diagnostic information is not logged
747234-8 4-Minor   Macro policy does not find corresponding access-profile directly
712542-6 4-Minor   Network Access client caches the response for /pre/config.php
707294-5 4-Minor   When BIG-IP as OAuth AS has missing OAuth Profile in the Access profile, the error log is not clear


WebAccelerator Issues

ID Number Severity Solution Article(s) Description
941961-1 3-Major   Upgrading system using WAM TCP profiles may prevent the configuration from loading


Wan Optimization Manager Issues

ID Number Severity Solution Article(s) Description
863601-4 2-Critical   Panic in TMM due to internal mirroring interactions


Service Provider Issues

ID Number Severity Solution Article(s) Description
974881-3 2-Critical   Tmm crash with SNAT iRule configured with few supported/unsupported events with diameter traffic
901033-4 2-Critical   TCP::respond causing memory exhaustion issue when send buffer overwhelmed available TCP window
989753-1 3-Major   In HA setup, standby fails to establish connection to server
982869-2 3-Major   With auto-init enabled for Message Routing peers, tmm crashes with floating point exception when tmm_total_active_npus value is 0
977053-1 3-Major   TMM crash on standby due to invalid MR router instance
966701-1 3-Major   Client connection flow is aborted when data is received by generic msg filter over sctp transport in BIG-IP
957029-2 3-Major   MRF Diameter loop-detection is enabled by default
921441-3 3-Major   MR_INGRESS iRules that change diameter messages corrupt diam_msg
917637-4 3-Major   Tmm crash with ICAP filter
908477-1 3-Major   Request-adapt plus request-logging causes HTTP double-chunking in an ICAP request
895801-1 3-Major   Changing an MRF transport-config's TCP profile does not take effect until TMM is restarted
788625-2 3-Major   A pool member is not marked up by the inband monitor even after successful connection to the pool member
753501-6 3-Major   iRule commands (such as relate_server) do not work with MRP SIP
749528-7 3-Major   IVS connection on VLAN with no floating self-IP can select wrong self-IP for the source-address using SNAT automap
748355-6 3-Major   MRF SIP curr_pending_calls statistic can show negative values.


Advanced Firewall Manager Issues

ID Number Severity Solution Article(s) Description
965897-1 2-Critical   Disruption of mcpd with a segmentation fault during config sync
964989-3 2-Critical   AFM DOS half-open does not handle wildcard virtual servers properly.
987133-3 3-Major   Non-EDNS response with RCODE FORMERR are blocked by dns-qdcount-limit vector.
977153-2 3-Major   Packet with routing header IPv6 as next header in IP layer fails to be forwarded
969509-1 3-Major   Possible memory corruption due to DOS vector reset
968953-2 3-Major   Unnecessary authorization header added in the response for an IP intelligence feed list request
964625-4 3-Major   Large blob size can result in MCP crash
959609-2 3-Major   Autodiscd daemon keeps crashing
953425-4 3-Major   Hardware syncookie mode not cleared when changing dos-device-vector enforcement
937749-1 3-Major   The 'total port blocks' value for NAT stats is limited to 64 bits of range
935769-4 3-Major   Upgrading / Rebooting BIG-IP with huge address-list configuration takes a long time
926549-2 3-Major   AFM rule loops when 'Send to Virtual' is used with Virtual Server iRule 'LB::reselect'
918905-1 3-Major   PCCD restart loop when using more than 256 FQDN entries in Firewall Rules
915221-5 3-Major   DoS unconditionally logs MCP messages to /var/tmp/mcpd.out
910417-1 3-Major   TMM core may be seen when reattaching a vector to a DoS profile
905153-3 3-Major   HW offload of vector 22 (IPv6 Duplicate Extension Headers) not operational
857897-3 3-Major   Address and port lists are not searchable within the GUI
818705-3 3-Major   BIG-IP CPU utilization is very high (>90%)
757279-4 3-Major   LDAP authenticated Firewall Manager role cannot edit firewall policies
716746-4 3-Major   Possible tmm restart when disabling single endpoint vector while attack is ongoing
981145-2 4-Minor   DoS events do not include the attack name for "tcp syn ack flood"
942665-1 4-Minor   Rate limit and threshold configuration checks are inconsistent when applied to Basic DoS Vectors and Bad Actors DoS vectors
935865-6 4-Minor   Rules that share the same name return invalid JSON via REST API
928177-3 4-Minor   Syn-cookies might get enabled when performing multiple software upgrades.
926425-2 4-Minor   Hardware SYN Cookies may not deactivate after the SYN attack ends and valid TCP traffic starts
920361-1 4-Minor   Standby device name sent in Traffic Statistics syslog/Splunk messages
803149-3 4-Minor   Flow Inspector cannot filter on IP address with non-default route_domain
987345-2 5-Cosmetic   Disabling periodic-refresh-log has no effect
906885-2 5-Cosmetic   Spelling mistake on AFM GUI Flow Inspector screen


Policy Enforcement Manager Issues

ID Number Severity Solution Article(s) Description
956013-2 3-Major   System reports{{validation_errors}}
941169-5 3-Major   Subscriber Management is not working properly with IPv6 prefix flows.
924589-5 3-Major   PEM ephemeral listeners with source-address-translation may not count subscriber data
911585-4 4-Minor   PEM VE does not send CCRi when receiving multiple subscriber requests in a short interval


Fraud Protection Services Issues

ID Number Severity Solution Article(s) Description
887205-1 3-Major   Correct handling of wildcard parameters with search-in 'any' marked for data integrity


Anomaly Detection Services Issues

ID Number Severity Solution Article(s) Description
932737-4 2-Critical   DNS & BADOS high-speed logger messages are mixed
944785-4 3-Major   Admd restarting constantly. Out of memory due to loading malformed state file
923125-3 3-Major   Huge amount of admd processes caused oom
914293-4 3-Major   TMM SIGSEGV and crash


Traffic Classification Engine Issues

ID Number Severity Solution Article(s) Description
913453-6 2-Critical   URL Categorization: wr_urldbd cores while processing urlcat-query
901041-2 2-Critical   CEC update using incorrect method of determining number of blades in VIPRION chassis
887609-6 2-Critical   TMM crash when updating urldb blacklist
958085-4 3-Major   IM installation fails with error: Spec file not found
948573-5 3-Major   wr_urldbd list of valid TLDs needs to be updated
974205-4 4-Minor   Unconstrained wr_urldbd size causing box to OOM
941773-2 4-Minor   Video resolution mis-prediction
941765-2 4-Minor   Video resolution mis-predictions


Device Management Issues

ID Number Severity Solution Article(s) Description
942521-6 3-Major   Certificate Managers are unable to move certificates to BIG-IP via REST
717174-4 3-Major   WebUI shows error: Error getting auth token from login provider


iApp Technology Issues

ID Number Severity Solution Article(s) Description
974193-1 3-Major   Error when trying to create a new f5.vmware_view.v1.5.9 iApp
818069-7 3-Major   GUI hangs when iApp produces error message


Protocol Inspection Issues

ID Number Severity Solution Article(s) Description
964585-2 3-Major   "Non OK return code (400) received from API call" is logged for ProtocolInspection auto update
778225-4 3-Major   vCMP guests don't have the f5_api_com key and certificate installed when licensed by vCMP host
935825-1 4-Minor   Cannot update_indexes/checkpoint DB object
760740-4 4-Minor   Mysql error is displayed when saving UCS configuration on BIG-IP system when MySQL is not running


Guided Configuration Issues

ID Number Severity Solution Article(s) Description
960133 1-Blocking   AGC 8.0 installation failure


In-tmm monitors Issues

ID Number Severity Solution Article(s) Description
944121-5 3-Major   Missing SNI information when using non-default domain https monitor running in tmm mode
788257-3 4-Minor   Bigd.mgmtroutecheck setting ignored by in-tmm monitors after bigstart restart


BIG-IP Risk Engine Issues

ID Number Severity Solution Article(s) Description
969385-1 3-Major   Automatic attach/detach BeWAF policy to virtual server stops working for all virtual servers.

 

Known Issue details for BIG-IP v16.0.x

989753-1 : In HA setup, standby fails to establish connection to server

Component: Service Provider

Symptoms:
In a high availability (HA) setup, standby fails to establish a connection to the server with the log message:

err tmm[819]: 01850008:3: MR: Received HA message targeting missing transport-config

Conditions:
In MRF (diameter/SIP) HA setup with connection mirroring enabled.

Impact:
Standby BIG-IP system fails to establish a connection to the server.

Workaround:
None.


987885-5 : Half-open unclean SSL termination might not close the connection properly

Component: Local Traffic Manager

Symptoms:
Upon receiving TCP FIN from the client in the middle of the SSL Application Data, the BIG-IP system does not close the connection on either client- or server-side (i.e., it does not 'forward' the FIN on the server-side as it normally does) causing the connection to go stale until the timeout is reached.

Conditions:
-- TCP and SSL profiles configured on a virtual server.
-- Client terminates the connection in the middle of an SSL record.

Impact:
Connection termination does not happen. Connection remains in the connection table until idle timeout is reached.

Workaround:
None.


987709-5 : Static target string as CNAME pool member might cause config load failure if wide IP with same name exists in another partition

Component: Global Traffic Manager (DNS)

Symptoms:
GTM config fails to load with errors similar to this:

01070726:3: Pool 5 /Common/cnamepool1 in partition Common cannot reference GTM wideip pool member 5 /Common/cnamepool1 gslb.mycompany.com /App2/gslb.mycompany.com 1 in partition App2
Unexpected Error: Loading configuration process failed

Conditions:
There is a wide IP with the same name in another partition as the static target CNAME pool member.

Impact:
Gtm config fails to load.

Workaround:
Create the wide IP first and then add the static target CNAME pool member.


987401-3 : Increased TMM memory usage on standby unit after pool flap

Component: Local Traffic Manager

Symptoms:
TMM memory usage on a BIG-IP standby device might be substantially higher than an active device.

Conditions:
Standby device with UDP mirroring traffic and datagram-load-balancing disabled.

Impact:
The standby device may not be able to take over traffic when failover happens.

Workaround:
None.


987345-2 : Disabling periodic-refresh-log has no effect

Component: Advanced Firewall Manager

Symptoms:
Port Block Allocation (PBA) periodic-refresh-log set to '0' - disabled is not honored. You might see messages similar to the following logged in /var/log/ltm or sent to remote logging destinations:

info tmm[6215]: 23003168 "Port Block Periodic Log","10.10.10.10","0","","10.10.10.10","0","1024","1031","16164968240","","unknown".

Conditions:
PBA periodic-refresh-log set to '0'.

Impact:
System provides unnecessary, excessive logging.

Workaround:
None


987133-3 : Non-EDNS response with RCODE FORMERR are blocked by dns-qdcount-limit vector.

Component: Advanced Firewall Manager

Symptoms:
When a client sends a DNS request to a non-EDNS-capable server, the server may send a legitimate response with RCODE FORMERR and no DNS data. The MALFORM DNS vector blocks those requests if the dns-qdcount-limit vector is enabled.

Conditions:
-- The client sends a DNS request to NON-EDNS capable server.
-- The server replies with RCODE FORMERR and no DNS data.
-- The dns-qdcount-limit vector is enabled.

Impact:
AFM erroneously detects an attack and mitigates it, and the client does not get a response from the EDNS server

Workaround:
Disable dns-qdcount-limit vector:

security dos device-config /Common/dos-device-config {
    dos-device-vector {
        dns-nxdomain-query {
            state disabled
        }
    }
}


987081-2 : Alarm LED remains active on Secondary blades even after LCD alerts are cleared

Component: TMOS

Symptoms:
When a condition occurs which causes an alert message to be logged to the LCD display for a VIPRION chassis, the Alarm LED on the blade where the condition was reported may be set (to solid or flashing amber or red) according to the severity of the reported condition.

When the LCD alert messages are cleared, the Alarm LED on the Primary blade in the chassis will be cleared (or set according to remaining alert messages if only a subset of messages are cleared).

However, the Alarm LED on the Secondary blades in the chassis will not be cleared, and will continue to indicate the highest severity of the previously reported alert messages.

Conditions:
This occurs when:
-- A condition is reported by a Secondary blade in the chassis which causes its Alarm LED to be set (to solid or flashing amber or red) and a message logged to the chassis LCD display.
-- The LCD alert messages are cleared, such as by issuing the 'tmsh reset-stats sys alert lcd' command.

Impact:
The Alarm LED on one or more Secondary blades in the chassis continues to indicate an alert condition even after the previously reported alert messages have been cleared.

Workaround:
To restore the Secondary blade LEDs to their proper state, restart the fpdd daemon on each affected blade.

For example, if the Alarm LED is not reset on the blade in slot 4, issue one of the following commands from the console of the Primary blade in the chassis:
-- clsh --slot=4 "bigstart restart fpdd"
-- ssh slot4 "bigstart restart fpdd"

Alternately, you may log in to the console of the affected blade and issue the 'bigstart restart fpdd' command directly.


986937-2 : Cannot create child policy when the signature staging setting is not equal in template and parent policy

Component: Application Security Manager

Symptoms:
When trying to create a child policy, you get an error:

FAILURE: "Could not update the Policy policy1. Inherited values may not be changed."

Conditions:
-- Parent policy created with signature staging disabled.
-- Creating a new child policy with that policy as a parent.

Impact:
You are unable to create the child policy and the system presents an error.

Workaround:
Create the policy without assigning it to the parent, and then assign it to the parent policy on the Inheritance Settings page.


985953-4 : GRE Transparent Ethernet Bridging inner MAC overwrite

Component: TMOS

Symptoms:
Traffic not being collected by virtual server and therefore not being forwarded to the nodes.

Conditions:
Encapsulated dest-mac is not equal to the Generic Routing Encapsulation (GRE) tunnel mac-address.

Impact:
Virtual server is not collecting decapsulated packets from the GRE Transparent Bridge tunnel unless the dest-mac of the encapsulated packet is the same as the mac-address of the GRE tunnel.

Workaround:
None.


985925-2 : Ipv6 Routing Header processing not compatible as per Segments Left value.

Component: Local Traffic Manager

Symptoms:
Packet should forward the packet with the route header unmodified when Segments Left is 0 (zero). It performs as expected when Segments Left is non-zero by dropping the packet and sending an ICMP error.

Conditions:
-- An IPv6 packet whose Next Header in IP header is Routing Header IPv6.
-- In the Routing Header IPv6 header, the Type field is 0.
-- In the Routing Header IPv6 header, the Segment Left field is 0.

Impact:
With Next Header field in IP header being Routing Header for IPv6, BIG-IP system fails to forward the ICMPv6 Echo Request packet to server, rather, it drops the packet.

Workaround:
None


985749-2 : TCP exponential backoff algorithm does not comply with RFC 6298

Component: Local Traffic Manager

Symptoms:
The algorithms used for TCP exponential backoff are different for SYN and non-SYN packets.

Conditions:
Using TCP.

Impact:
Retransmission timeout interval depends on the inclusion/exclusion of SYN flag.

Workaround:
None


985433-1 : Insertion of the X-Forwarded-For HTTP header can fail, causing the client's connection to be reset.

Component: Local Traffic Manager

Symptoms:
Some client connections are being reset with rst-cause 'Unknown reason'.

Conditions:
--- Standard virtual server with the TCP and HTTP profiles.

--- The HTTP profile is configured to insert the X-Forwarded-For header.

--- The client supplies an empty X-Forwarded-For header in the HTTP request.

Impact:
Affected client connections are reset, leading to application failures.

Workaround:
You can work around this issue by disabling the header insertion in the HTTP profile and instead using an iRule similar to the following example:

when HTTP_REQUEST {
   HTTP::header replace X-Forwarded-For [IP::remote_addr]
}


985401-2 : ProxySSL virtual servers should work with web acceleration (ramcache) profiles attached

Component: Local Traffic Manager

Symptoms:
Attempting to attach a web acceleration profile to a virtual server that has an SSL profile with ProxySSL enabled will result in the following validation error:

A validation error similar to:

01070734:3: Configuration error: Proxy SSL is not compatible with Web Acceleration profile on Virtual Server (<virtual server name>).

Conditions:
-- Virtual server using an SSL profile with ProxySSL enabled.
-- Attaching a web acceleration (webacceleration) profile to the virtual server.

Impact:
Unable to use the web acceleration profile with ProxySSL virtual servers.

Workaround:
Avoid using ProxySSL virtual servers with web acceleration (ramcache) profiles attached.


985001-4 : Taiwan, Hong Kong, and Macau Are Defined As Countries in DNS/GTM Topology Definition

Component: Global Traffic Manager (DNS)

Symptoms:
Taiwan, Hong Kong, and Macau are defined as countries in DNS/GTM Topology definition.

Conditions:
In GUI screen, under GSLB/Topology/Records and GSLB/Topology/Regions, 'Country' field can be used to specify Taiwan, Hong Kong, and Macau.

Impact:
Taiwan, Hong Kong, and Macau can be configured as countries in GSLB/Topology screens.

Workaround:
Change 'Country' label to 'Country/Location' and the 'Country/State' label to 'Country/Location/State'.


984897-2 : Some connections performing SSL mirroring are not handled correctly by the Standby unit.

Component: Local Traffic Manager

Symptoms:
Some of the connections performing SSL mirroring do not advance through TCP states as they should on the Standby unit.

Additionally, these connections do not get removed from the connection table of the Standby unit when the connections close. Instead, they linger on until the idle timeout expires.

Conditions:
A virtual server configured to perform SSL connection mirroring.

Impact:
Should the units fail over, some connections may not survive as expected.

Additionally, given a sufficient load and a long idle timeout, this could cause unnecessary TMM memory utilization on the Standby unit.

Workaround:
None.


984521-3 : Accept-Encoding header is stripped by Bot Defense profile in case of incompatible file extension and a dot in the file name

Component: Application Security Manager

Symptoms:
Bot Defense profile checks if a page is not an HTML page by checking the file extension (among other ways).

In case the filename contains a dot (.) - the parsing is wrong and it is not detected as incompatible. As a result, the Accept-Encoding header is removed (to allow injection in the response).

Conditions:
-- Bot Defense profile is attached to s virtual server configured with any response injection (Device ID, Browser Verification, or Single Page Application).
Request is sent to an incompatible file extension (one of gif,png,bmp,jpg,ico,css,mp3,mp4,mpg,avi,wmv,mov,3gp,fla,swf,js), and filename contains a dot (.).

Impact:
Accept-Encoding header is removed, causing the server to not send a gzipped response.

Workaround:
Add this specific URL to sys db:

dosl7.parse_html_excluded_urls


982993-5 : Gateway ICMP monitors with IPv6 destination and IPV6 transparent nexthop might fail

Component: Local Traffic Manager

Symptoms:
Gateway ICMP monitors configured with IPv6 destinations and IPv6 transparent nexthop do not work if the IPv6 destination address is not directly connected, but reachable via an intermediate hop.

Conditions:
An IPv6 monitor's destination address is not directly connected, but reachable via intermediate hop.

Impact:
Monitor status remains DOWN.

Workaround:
Consider monitoring the actual target.


982869-2 : With auto-init enabled for Message Routing peers, tmm crashes with floating point exception when tmm_total_active_npus value is 0

Component: Service Provider

Symptoms:
Tmm may crash.

Conditions:
This occurs when auto initialization is enabled for one or more Message Routing peers and during CMP transition when tmm_total_active_npus value is 0.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


982361-2 : SNAT on wildcard virtual server does not work

Component: Global Traffic Manager (DNS)

Symptoms:
SNAT on wildcard virtual server does not work.

Conditions:
Wildcard DNS virtual server with SNAT enabled.

Impact:
SNAT does not work on DNS cache resolver.

Workaround:
None.


981485-5 : Neurond enters a restart loop after FPGA update.

Component: TMOS

Symptoms:
After FPGA firmware upgrade, the neurond process might enter a restart loop, unable to recover.

When the problem is present you might see logs similar to:
-- notice chmand[6674]: 012a0005:5: FPGA PNP FW upgrade check: req type 0, file:Latest
-- notice chmand[6674]: 012a0005:5: FPGA: Requesting type: 0, vers: Latest
-- notice chmand[6674]: 012a0005:5: FPGA: current type: 2, vers: hsb_5SGXEA7H2F35C2_t37dc_1d10_v5.23.5.0_d20.06.11.00.bit
-- notice chmand[6674]: 012a0005:5: FPGA: match for type: 0, vers: hsb_5SGXEA7H2F35C2_t37dc_1d10_v5.6.7.0_d20.06.11.00.bit
-- notice chmand[6674]: 012a0005:5: removed /var/db/mcpdb.* FPGA current disk firmware updated to: /L7L4_BALANCED_FPGA type: 0
-- notice chmand-fpga-pnp[17551]: Stopping TMM, BCM56xxd, and neurond
-- notice logger[17553]: /bin/bash /etc/init.d/fw_pnp_upgrade upgrade restart ==> /usr/bin/bigstart stop tmm bcm56xxd neurond

Conditions:
FPGA firmware mismatch, leading to FPGA firmware upgrade.

Impact:
Enhanced flow acceleration provided by the Neuron chip cannot be utilized.

Workaround:
Perform a full system restart.


981145-2 : DoS events do not include the attack name for "tcp syn ack flood"

Component: Advanced Firewall Manager

Symptoms:
BIG-IQ does not display the attack name for a 'tcp syn ack flood' attack.

Conditions:
DoS on BIG-IP enabled to address 'tcp syn ack flood' attack.

Impact:
Lack of DoS attack information. The mitigation occurs as expected. Only the notification information is missing.

Workaround:
None.


981069-2 : Reset cause: "Internal error (ASM requested abort (payload release error))"

Component: Application Security Manager

Symptoms:
An unexpected RST occurs on ASM inbound traffic. The rst cause shows "Internal error (ASM requested abort (payload release error))"

Conditions:
Specific configuration with specific traffic

Impact:
ASM traffic is affected.

Workaround:
Can be workaround by one of the following:

1. Turn off data guard or change it to blocking.
2. Make the server reply with zipped responses (perhaps by adding the accept-encoding: gzip using an irule)
3. Add an additional response related feature.
4. use the following irule in case there aren't cookie related enforcement:
when HTTP_REQUEST {
  set cookies [HTTP::cookie names]
  foreach aCookie $cookies {
    if {$aCookie matches_regex {^TS(?:[0-9a-fA-F]{6,8})(?:$|_[0-9]+$)}} {
      HTTP::cookie remove $aCookie
    }
  }
}


980821-3 : Traffic is processed by All Port Virtual Server instead of Specific Virtual Server that is configured.

Component: Local Traffic Manager

Symptoms:
After creating a more specific virtual server via the REST API, the less-specific (wildcard port) virtual server continues to process traffic.

Conditions:
-- A wildcard port virtual server exists on the BIG-IP system.
-- Using the REST API, a virtual server is created that has the same destination address but a specific port.

Impact:
Newly created virtual server fails to process traffic appropriately.

Workaround:
None.


980325-6 : Chmand core, failover occurs.

Component: TMOS

Symptoms:
Chmand cores and triggers an IP address conflict between two devices in Active/Active, followed by a failover.

Conditions:
The conditions under which this issue occurs are unknown. The logs do not indicate any specific conditions that triggers the chmand core.

Impact:
Chmand core eventually leads to BIG-IP failover.

Workaround:
None.


979045-2 : The tpm-status-check service shows System Integrity Status: Invalid when Engineering Hotfix installed on certain platforms

Component: TMOS

Symptoms:
After installing an Engineering Hotfix version of BIG-IP v14.1.0 or later, certain BIG-IP hardware systems. The Trusted Platform Module (TPM), status is showing as INVALID.

Conditions:
This may occur:
-- Running BIG-IP v14.1.0 or later.
-- Using Engineering Hotfixes containing fixes for the following bugs:
   - ID893885 (https://cdn.f5.com/product/bugtracker/ID893885.html)
   - ID946745 (https://cdn.f5.com/product/bugtracker/ID946745.html)
   - ID963017 (https://cdn.f5.com/product/bugtracker/ID963017.html)
-- The issue is observed only on the following platforms:
   - i11600 / i11800
   - i11400-DS / i11600-DS / i11800-DS

Impact:
The TPM status INVALID indicates that the system integrity is compromised when it is actually valid.

Workaround:
None.


978833-1 : Use of CRL-based Certificate Monitoring Causes Memory Leak

Component: Local Traffic Manager

Symptoms:
Tmm memory use increases and the aggressive mode sweeper activates.

Conditions:
CRL certificate validator is configured.

Impact:
TMM ssl and ssl_compat memory usage grow over time, eventually causing memory pressure, and potentially a traffic outage due to TMM restart.


978649 : Citrix Connection fails with Dell Wyse Client on 16.0.0.1

Component: Access Policy Manager

Symptoms:
On 16.0.0.1, Wyse clients fail to connect to Citrix Virtual Desktop Interface (VDI).

Conditions:
- Configure Citrix VDI.
- Connect to virtual server from Dell Wyse client.

Impact:
The client cannot connect and the following error is seen in apm log file:

server-side connection was reset, reason: iRule execution error


977625-2 : GTM persistence records linger in tmm

Component: Global Traffic Manager (DNS)

Symptoms:
-- GTM persistence records are not cleared.
-- GTM still answers from persist records even though the persist records not listed by the "tmsh show gtm persist" command.

Conditions:
Persistence for wideip or application is disabled and then enabled quickly afterwards

Impact:
GTM answers from stale persist records.

Workaround:
Do not enable persistence right after disabling.


977609-2 : Request logging profile not logging server-side variables on a virtual-server with rate-limit or connection-limit applied

Component: TMOS

Symptoms:
Pool-name, server IP address, and port are missing in the syslog message.

Conditions:
Request Logging template using '$VIRTUAL_POOL_NAME', '$SERVER_IP', '$SERVER_PORT'.

ltm profile request-log with:
request-log-template "Virtual: $VIRTUAL_NAME Pool: $VIRTUAL_POOL_NAME Server IP: $SERVER_IP Server Port: $SERVER_PORT"

}

Impact:
The request logs are intermittently missing information for VIRTUAL_POOL_NAME, SERVER_IP, SERVER_PORT.

Workaround:
None.


977153-2 : Packet with routing header IPv6 as next header in IP layer fails to be forwarded

Component: Advanced Firewall Manager

Symptoms:
BIG-IP systems fail to follow RFC 5095, which specifies the traffic should be forwarded.

Conditions:
This symptom is found when the following conditions are met:
-- An IPv6 packet whose Next Header in IP header is Routing Header IPv6.
-- In the Routing Header IPv6 header, the Type field is 0.
-- In the Routing Header IPv6 header, the Segment Left field is 0.

Impact:
This failure in forwarding ICMP error message prevents the BIG-IP AFM product from completing certification.

Workaround:
None.


977053-1 : TMM crash on standby due to invalid MR router instance

Component: Service Provider

Symptoms:
In high availability (HA) setup, TMM on the standby device may crash due to an invalid Message Routing (MR) router instance.

Conditions:
-- HA environment.
-- Connection mirroring is enabled.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


976669-1 : FIPS Integrity check fails for other secondary blades after rebooting/replacing secondary blade

Component: TMOS

Symptoms:
After rebooting or replacing a secondary blade, the FIPS integrity check fails for other secondary blades and they fail to fully boot.

Conditions:
This can occur after rebooting or replacing a secondary blade.

Impact:
When the FIPS integrity checks fail the blades won't fully boot.

Workaround:
On the secondary blade reboot, the following critical files are deleted from other secondary blades which leads to FIPS integrity check failure:

/root/.ssh/authorized_keys
/root/.ssh/known_hosts

To mitigate, copy the missing files from the primary blade to the secondary blade.

From the primary blade, issue the following command towards the secondary blade(s).

rsync -avz -e ssh /root/.ssh/* root@<Secondary Blade>:/root/.ssh/


976517-3 : Tmsh run sys failover standby with a device specified but no traffic group fails

Component: TMOS

Symptoms:
The tmsh run /sys failiover standby device <device> command fails and returns an error if no traffic-group is specified:

Syntax Error: There is no failover device with a name (/Common/bigip2.localhost).

Conditions:
Two or more BIG-IPs configured with high availability (HA)

Impact:
You are required to specify all the traffic groups you want to failover to a peer.

Workaround:
For each traffic group that you want to failover to a peer run the tmsh run /sys failover standby.

For example if you want to fail over both traffic groups traffic-group-1 and traffic-group-2 to failover to bigip2.localhost, run the following:

tmsh run /sys failover standby device bigip2.localhost traffic-group traffic-group-1

tmsh run /sys failover standby device bigip2.localhost traffic-group traffic-group-2

If you want the device to be standby for all traffic groups but you don't care what device takes over as active, run the following command (note there is no traffic-group nor device):

tmsh run /sys failover standby


976101-3 : TMM crash after deleting an interface from a virtual wire vlan

Component: Local Traffic Manager

Symptoms:
TMM crashes.

Conditions:
-- Virtual wire enabled
-- Delete an interface from the virtual wire vlan.

Impact:
Traffic disrupted while tmm restarts.


976013-5 : If bcm56xxd starts while an interface is disabled, the interface cannot be enabled afterwards

Component: TMOS

Symptoms:
A disabled interface is not getting enabled.

Conditions:
-- An interface is disabled
-- bcm56xxd is restarted

Impact:
The interface remains on disable state and no traffic passes via that interface.

Workaround:
Restart bcm56xxd again.


975725-4 : Wildcard virtual servers do not forward L3 unicast traffic sent to L2 broadcast

Component: Local Traffic Manager

Symptoms:
L3 unicast traffic with L2 broadcast destination MAC (ff:ff:ff:ff:ff:ff) matching wildcard virtual servers is not handled properly.

Conditions:
Wildcard virtual server is configured to handle such traffic.

Impact:
Traffic will not be forwarded properly.

Workaround:
Use specific non-wildcard virtual-server.


974985-1 : Dosl7/bot does not ignore non-http traffic even when disabled via iRule DOSL7::disable

Component: Application Security Manager

Symptoms:
Non http traffic isn't forwarded to the backend server

Conditions:
- ASM provisioned
- DoS Application or Bot Defense profile assigned to a virtual server
- DOSL7::disable applied at when CLIENT_ACCEPTED {}

Impact:
Broken webapps with non-http traffic

Workaround:
Instead of using DOSL7::disable, redirect non-http traffic to non-http aware virtual server using the iRule command virtual <virtual_server_name>


974881-3 : Tmm crash with SNAT iRule configured with few supported/unsupported events with diameter traffic

Component: Service Provider

Symptoms:
Currently, for diameter, a SNAT iRule can be configured with MR_INGRESS and MR_FAILED events. Certain events can cause tmm to crash.

Conditions:
A SNAT iRule is configured with the events CLIENT_ACCEPTED, DIAMETER_INGRESS and DIAMETER_EGRESS for diameter

Impact:
Traffic disrupted while tmm restarts.


974837-4 : Browser-based VPN may not establish first time after upgrade.

Solution Article: K25173042

Component: Access Policy Manager

Symptoms:
After upgrading, initially for the first connection, the browser-based VPN components might fail to launch.

You may observe the following error message in a pop up dialog of the browser when the network access fails to launch:
=============
"F5 VPN - Your session could not be established"

"Your session could not be established.
The session reference number: nnnnnnnn

Application will be closed"
=============

Conditions:
This can occur after upgrading to the following BIG-IP versions:

-- 15.1.2.1

And the following VPN versions:
-- 7.2.1.1
-- 7.1.8.5

Impact:
End user clients may be unable to use Network Access for the first time after upgrade.

Workaround:
Workaround 1:
-- Re-launch the Network Access resource.

Workaround 2:
-- Redeploy the Microsoft Windows clients package with 'Web Browser Add-ons for BIG-IP Edge Client' checked when downloading the package.

Workaround 3:
-- Run f5vpn_setup installer on all client devices.


974513-1 : Dropped requests are reported as blocked in Reporting/charts

Component: Application Security Manager

Symptoms:
Dropped requests are reported as blocked in Reporting/charts.

Conditions:
Request is dropped (or client side challenge / captcha is not answered) as part of a brute force mitigation or a slow post attack causes dropping of a request.

Impact:
Data reported might be incorrect. There is a filter for dropped requests which, when selected, does not show anything, even when there are drops.

Workaround:
None.


974409-3 : False Positive "Surfing Without Human Interaction"

Component: Application Security Manager

Symptoms:
When using Bot Defense profile, and an application contains many HTML pages which are not qualified (not even accept: text/html), a "Surfing Without Human Interaction" anomaly is mis-counted and falsely raised.

Conditions:
-- Bot Defense Profile is attached to a virtual server.
-- The application contains many HTML pages which can be detected as such from the request.

Impact:
Real clients might or might not be blocked, it depends on the environment.

Workaround:
None.


974225-1 : Link Status traps are not issued on VE based BIG-IP systems

Component: TMOS

Symptoms:
The Link Status traps, both F5 proprietary and standard LinkUp/LinkDown are issued on the BIG-IP hardware but not on BIG-IP Virtual Edition (VE) configurations.

Conditions:
This occurs when interfaces on hardware-based BIG-IP systems or VE-based BIG-IP configurations experience link status events (links go up or down, or are administratively enabled or disabled).

Impact:
Log messages are issued and SNMP traps are issued if an SNMP trap destination is configured.

On BIG-IP Virtual Edition, logs are emitted but traps do not occur.

An SNMP client waiting for a Link Status trap on an administrator to enable or disable then, does not receive the trap.

Workaround:
None.


974205-4 : Unconstrained wr_urldbd size causing box to OOM

Component: Traffic Classification Engine

Symptoms:
The wr_urldbd processes' memory grows and can exceed 4 GB. This might cause an out-of-memory (OOM) condition when processing URLCAT requests.

Conditions:
This occurs when processing a large volume of distinct and valid URLCAT requests.

Impact:
The device eventually runs out of memory (OOM condition).

Workaround:
Restart the wr_urldbd process:
 restart sys service wr_urldbd


974193-1 : Error when trying to create a new f5.vmware_view.v1.5.9 iApp

Component: iApp Technology

Symptoms:
Error when trying to create a f5.vmware_view.v1.5.9 iApp

Configuration Warning: New virtual address (/Common/10.10.10.10) used by server with access profile attached has traffic group (/Common/traffic-group-1) that is different from existing one (/Common/traffic-group-exchange). Change it to the existing one

Conditions:
-- Create a new f5.vmware_view.v1.5.9 iApp
-- iApp uses a traffic group other than the default traffic-group-1

Impact:
Unable to create new f5.vmware_view.v1.5.9 iApp

Workaround:
None.


973341-1 : Customized device certs will break scripts relying on /config/httpd/conf/ssl.crt/server.crt

Component: Global Traffic Manager (DNS)

Symptoms:
Bigip_add, big3d_install, gtm_add will not work.

Conditions:
Device cert is customized.

Impact:
Bigip_add, big3d_install, gtm_add not work.

Workaround:
Copy the content of the new cert to default file "/etc/httpd/conf/ssl.crt/server.crt".


973261-1 : GTM HTTPS monitor w/ SSL cert fails to open connections to monitored objects

Component: Global Traffic Manager (DNS)

Symptoms:
Big3d does not try to open TCP connections if a HTTPS monitor contains a cert/key.
/var/log/gtm shows:

err big3d[19217]: 01333001:3: Start: SSL error:02001002:system library:fopen:No such file or directory
err big3d[19217]: 01333001:3: Start: SSL error:20074002:BIO routines:FILE_CTRL:system lib
err big3d[19217]: 01333001:3: Start: SSL error:140CE002:SSL routines:SSL_use_RSAPrivateKey_file:system lib
err big3d[19217]: 01330014:3: CSSLSocket:: Unable to get the session.

Conditions:
GTM HTTPS monitor with non-default cert/key.

Impact:
Unable to use HTTPs monitor.


972785-7 : Unable to create virtual server with a non-zero Route Domain for custom partition via iControl SOAP

Component: TMOS

Symptoms:
While creating a virtual server using iControl SOAP you get an error:

error_string : 0107004d:3: Virtual address (/VPN_WEB_01/0.0.0.0%201) encodes IP address (0.0.0.0%201) which differs from supplied IP address field (1.1.1.5%201).'

Conditions:
-- Using iControl SOAP to create a virtual server
-- The virtual server is assigned to a partition that uses a non-default route domain.

Impact:
Unable to create the virtual server with the iControl SOAP command.

Workaround:
First create the virtual server with a default Virtual Address ("0.0.0.0") and then update the virtual address the desired address.

Example:
ltm.LocalLB.VirtualServer.create([{'name': 'vs_test_9095', 'address': '0.0.0.0', 'port': 9090, 'protocol': 'PROTOCOL_TCP'}], ['255.255.255.255'], [{'type': 'RESOURCE_TYPE_POOL'}], [[{'profile_context': 'PROFILE_CONTEXT_TYPE_ALL', 'profile_name': 'fastL4'}]])
ltm.LocalLB.VirtualServer.set_destination_v2(['vs_test_9095'],[{'address': '10.10.10.50', 'port': 9090}])


971297-1 : DNSKEYS Type changed from external to internal and Keys are not stored in HSM after upgrade

Component: Global Traffic Manager (DNS)

Symptoms:
DNSSEC keys which are stored on netHSM type is changed from FIPS external to internal during the upgrade.

Conditions:
-- BIG-IP with a NetHSM license
-- BIG-IP uses external DNSSEC keys stored in the NetHSM
-- The BIG-IP device is upgraded

Impact:
The keys are stored locally following the upgrade.

Workaround:
None.


971217-1 : AFM HTTP security profiles may treat POST requests with Content-Length: 0 as "Unparsable Request Content" violations.

Component: Local Traffic Manager

Symptoms:
An HTTP Security profile can be created and enabled within Advanced Firewall Manager's Protocol Security options. The HTTP Security Profile contains various protocol checks that can be enabled and disabled to allow customization of security checks. When the "Unparsable request content" check is selected, BIG-IP will incorrectly indicate that HTTP POST requests with Content-Length:0 are not allowed assuming that these requests are unparsable. POST requests with Content-Length:0 can still be checked by enabling the "POST request with Content-Length: 0" option in the same profile.

Conditions:
-- HTTP Protocol Security Profile configured with the "Unparsable request content" check.

-- Client sends HTTP POST request with Content-Length:0

Impact:
POST requests of Content-Length 0 cannot be disabled separately from general "Unparsable request content".

Workaround:
None.


971065-1 : Using ACCESS::log iRule command in RULE_INIT event makes TMM crash

Component: Access Policy Manager

Symptoms:
TMM crashes.

Conditions:
- APM is provisioned.
- ACCESS::log command is invoked in RULE_INIT iRule event handler.

Impact:
TMM crashes causing traffic disruption.

Workaround:
Avoid using ACCESS::log in the RULE_INIT event.


970829-6 : iSeries LCD incorrectly displays secure mode after reboot

Component: TMOS

Symptoms:
After a reboot on iSeries platforms, the LCD can end up displaying secure mode even though the corresponding db variable lcd.showmenu is set to 'enable'.

Conditions:
This can occur intermittently after rebooting iSeries platforms.

Impact:
LCD continuously displays secure mode.

Workaround:
None.


969637-1 : Config load failed with "FIPS 140 operations not available on this system" after upgrade to 15.1.1

Component: Local Traffic Manager

Symptoms:
After upgrade to 15.1.1, configuration load with below message in audit logs.
"FIPS 140 operations not available on this system"

Conditions:
Applicable only to devices which have FIPS HSM devices.

Impact:
Config load failure leads to device go offline.


969553-1 : DNS cache returns SERVFAIL

Component: Global Traffic Manager (DNS)

Symptoms:
- A DNS cache returns SERVFAIL responses to clients, despite the BIG-IP system receiving a good (albeit delayed) response from upstream servers.

- When this happens, the BIG-IP system can be seen reject the responses from the upstream servers with ICMP errors (Destination unreachable - Port unreachable).

- If the db key dnscacheresolver.loglevel is set to debug5, the following error message is visible in the /var/log/ltm file when this issue occurs:

debug tmm[13147]: DNScache: request example.com. has exceeded the maximum number of glue fetches 17 to a single delegation point

Conditions:
This issue occurs when the following conditions are met:

- A DNS cache is in use on the BIG-IP system.

- The DNS cache is configured with a forward-zone that uses multiple servers to perform resolutions.

- The RTT of the servers fluctuates. For example, the servers are generally fast to reply for most domains, but take extra time to reply for a given domain.

- 'Randomize Query Character Case' is enabled in the DNS cache.

If the requests for the domain take a long time to resolve, BIG-IP may reply with SERVFAIL.

Impact:
Clients of the BIG-IP DNS cache are not returned an answer. As a result, application failures may occur.

Workaround:
You can work around this issue by disabling 'Randomize Query Character Case' in the DNS cache.


969509-1 : Possible memory corruption due to DOS vector reset

Component: Advanced Firewall Manager

Symptoms:
Unpredictable result due to possible memory corruption

Conditions:
DOS vector configuration change

Impact:
Memory corruption


969385-1 : Automatic attach/detach BeWAF policy to virtual server stops working for all virtual servers.

Component: BIG-IP Risk Engine

Symptoms:
Automatic attach/detach BeWAF policy to a virtual server stops working for all virtual servers if at least one virtual server has a regular ASM policy with TAP profile

Conditions:
Define Virtual Servers with DOS profiles, along with Virtual Servers that are managed by cloud (Cortex)

Impact:
Detaching virtual servers from DOS can cause the attach option to be disabled.

Workaround:
Do not define virtual servers with cloud along with virtual servers managed by cloud (Applications).


969329-3 : Dashboard: Chart title/legend 'Control Plane' needs to be modified within dashboard of BIG-IP

Component: TMOS

Symptoms:
BIG-IP Virtual Edition (VE) uses a virtualized core, so there is no hyper-threading. This means the data plane and control plane share a single CPU core. However, the Dashboard allows you to select CPU data for 'Control Plane' beside System Average.

Conditions:
View GUI Dashboard on BIG-IP VE or HTsplit-disabled appliances.

Impact:
Dashboard chart title creates confusion.

Workaround:
None.


969213-3 : VMware: management IP cannot be customized via net.mgmt.addr property

Component: TMOS

Symptoms:
IP addresses provided for VM customization in VMware are ignored. net.mgmt.addr and net.mgmt.gw properties supposed to be used when customization of IP addresses during VM setup is desired. But the addresses are ignored.

Conditions:
VMware only. Happens in any of the ways in which address are supplied via net.mgmt.addr and net.mgmt.gw. See https://clouddocs.f5.com/cloud/public/v1/vmware/vmware_setup.html for scenario where net.mgmt.addr and net.mgmt.gw can be set. VM customization profiles still work properly.

Impact:
Management IP cannot be customized in VMware during the VM setup.


968953-2 : Unnecessary authorization header added in the response for an IP intelligence feed list request

Component: Advanced Firewall Manager

Symptoms:
Empty authorization header in the response for an IP intelligence feed list request.

Conditions:
Feed list configured without username/password pair.

Impact:
Feed List request from dwbld adds unnecessary Authorization header. There is no functional impact.

Workaround:
None.


968949-6 : Keepalives aren't sent in FIN_WAIT_2 when using a TCP profile

Component: Local Traffic Manager

Symptoms:
When a client-side connection goes into FIN_WAIT_2, BIG-IP doesn't send keepalives even if they are being sent on the server-side connection.

Conditions:
- Virtual server configured with a TCP profile and network listener.

Impact:
Client-side connections timeout prematurely.
As a result, the server-side connections end up being open indefinitely.

Workaround:
No workaround currently known.


968929-1 : Http_send_fallback_response_func seg fault

Component: Local Traffic Manager

Symptoms:
TMM crashes.

Conditions:
- HTTP profile without fallback host.
- iRules.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Configure fallback host to an HTTP profile that redirects the request to a specified location.


968641 : Fix for zero LACP priority

Component: Local Traffic Manager

Symptoms:
A LACP priority of zero prevents connectivity to Cisco trunks.

Conditions:
LACP priority becomes 0 when system MAC address has 00:00 at the end.

Impact:
BIG-IP may be unable to connect to Cisco trunks.

Workaround:
None.


968581-1 : TMSH option max-response for "show /ltm profile ramcache" command may not comply with its description

Component: Local Traffic Manager

Symptoms:
The TMSH command "show /ltm profile ramcache" has a max-response option to output a number of records designated in this parameter. Due to calculation algorithm, the command may output less records than RAMCACHE stores or more records than the limit prescribes.

Conditions:
-- A virtual server is configured on BIG-IP.
-- A webacceleration profile with no web application is attached to the virtual server.
-- Traffic is sent over the virtual server with a number of unique cacheable documents that exceed a designated limit.

Impact:
Output of the command may not match to actual list of stored documents in RAMCACHE.


967905-4 : Attaching a static bandwidth controller to a virtual server chain can cause tmm to crash

Component: TMOS

Symptoms:
Tmm crashes.

Conditions:
-- static bwc
-- virtual to virtual chain

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Do not use the static bwc on a virtual chain.


967737-1 : DNS Express: SOA stops showing up in statistics from second zone transfer

Component: Global Traffic Manager (DNS)

Symptoms:
Start of Authority (SOA) record is not displayed in zone statistics.

Conditions:
The issue appears after the 2nd zone transfer.

Impact:
This is a cosmetic issue without any actual impact.

Workaround:
None


967425-1 : mcp error: 0x1020036 at ../mcp/db_pool.c:461

Component: Local Traffic Manager

Symptoms:
After a node has been 'moved' / renamed, modification of objects referencing the node may result in a database error and issues with the intended action.

In particular, when a node which is associated with a pool is moved, it will appears to be successful, however, after modifying the session / user status, it will result in an error.:
mcp error: 0x1020036 at ../mcp/db_pool.c:461

Conditions:
In particular, when a node which is associated with a pool is moved, it will appears as successful, however, after modifying the session / user status, it will result in a DB error.

Impact:
A after modifying the pool, an error will be logged.

Connections will continue to be accepted despite all members in the pool being down/disabled.


967353-2 : HTTP proxy should trim spaces between a header field-name and colon in its downstream responses.

Component: Local Traffic Manager

Symptoms:
Client receives no response along with a connection reset by the BIG-IP system.

Conditions:
-- HTTP Profile is enabled on the BIG-IP system.
-- Server sends HTTP response with one or more header field names separated with the trailing colon by a space.

Impact:
HTTP responses that should be delivered to the client by the proxy are not being sent out.

Workaround:
None


967249-1 : TMM may leak memory early during its startup process, and may continue to do so indefinitely.

Component: Local Traffic Manager

Symptoms:
TMM leaks memory in the packet and xdata components. The aggressiveness of the leak depends on how much traffic TMM receives from the Linux host subsystem.

Conditions:
- A BIG-IP system running more than 1 TMM instance.

- Early during its startup process, TMM begins receiving traffic from the Linux host subsystem destined to the network (e.g., remote syslog traffic routed to its destination through TMM).

- Depending on the system's configuration, TMM attempts to set up flow forwarding for the aforementioned traffic. This may happen, for instance, if the egress VLAN is configured for 'cmp-hash src-ip'.

- TMM hasn't fully completed its startup process yet.

Impact:
TMM leaks memory.

If the flow set up during early TMM startup continues to receive a constant stream of new packets, then the flow may live on indefinitely, and TMM may continue to leak memory indefinitely.

In the example of remote syslog traffic, this could happen, for instance, if the box keeps logging messages at a sustained rate.

Eventually, TMM may be unable to allocate any more memory and crash. Traffic disrupted while tmm restarts.

Workaround:
You can work around this issue by ensuring that TMM does not receive any traffic from the Linux host subsystem for forwarding during early startup.

In the example of remote syslog destinations, you could specify the management IP address of the system as the source IP address for the traffic, thus forcing the traffic out of the management port instead of TMM. This implies the management port has a suitable working route to the destination.


967093-2 : In SSL forward proxy when the signing CA cert and end-entity cert has a different signature algorithm, the SSL connection may fail

Component: Local Traffic Manager

Symptoms:
In SSL forward proxy, the client side handshake may fail with the message: fwdp lookup error.

Conditions:
The handshake failure occurs when the certificate chain consists of different key types. For example, the following cert chain may fail the handshake:

root CA (rsa) --> intermediate CA1 (rsa) --> intermediate CA2 (ec) --> end-entity cert (ec)

The signing CA which is intermediate CA2 has a key of EC type, but cert is signed by RSA signature. The end-entity cert has a key of EC type, but cert is signed by ECDSA.
In this case, the signer cert has different signature from that of the end-entity cert.

Impact:
SSL forward proxy handshake fails.


966949-1 : Multiple FQDN ephemeral nodes not deleted upon deleting FQDN template node

Component: TMOS

Symptoms:
If an FQDN template node is configured with "autopopulate enabled" and the FQDN name resolves to multiple IP addresses, multiple FQDN ephemeral nodes will be created.
If the FQDN template node is then deleted, the associated FQDN ephemeral nodes (sharing the same FQDN name) will not be deleted as expected.

Conditions:
This may occur under the following conditions:
-- An FQDN template node is configured with "autopopulate enabled"
-- The configured DNS server resolves the FQDN name to multiple IP addresses
-- You are running an Affected Version of BIG-IP, or an Engineering Hotfix based on a non-Affected Version of BIG-IP which contains a fix for ID 722230

This issue does not occur if only one FQDN ephemeral node is created for the associated FQDN template node.

Impact:
Unused FQDN ephemeral nodes may remain in the active configuration.
-- Since is it not possible to delete an FQDN template node if there are any FQDN template pool members referring to that node, it is not possible for any FQDN ephemeral pool members to remain when the steps that lead to this issue occur.
-- Since traffic can only be passed to FQDN ephemeral pool members, the existence of the unused FQDN ephemeral nodes does not lead to traffic being passed to such nodes.

Workaround:
It is possible to work around this issue by one of the following methods:
-- Manually deleting the remaining FQDN ephemeral nodes using the "tmsh" command-line interface (CLI)
(Note that this is normally not possible. It is possible to manually delete an FQDN ephemeral node only if the corresponding FQDN template node no longer exists.)
-- Restarting BIG-IP (for example, using the command "bigstart restart")


966701-1 : Client connection flow is aborted when data is received by generic msg filter over sctp transport in BIG-IP

Component: Service Provider

Symptoms:
Client connections are aborted when the generic message router profile is used in conjunction with the SCP transport profile.

Conditions:
-- SCTP transport profile
-- MRF generic msg router profile

Impact:
BIG-IP is unable to process the traffic received over the SCTP transport for MRF generic message routing


966613-5 : Cannot create XML profile based on WSDL when wsdl contains empty soap:address – getting error ‘Column 'object_uri' cannot be null’

Component: Application Security Manager

Symptoms:
Perl error returned when saving new XML content profile using wsdl file with empty soap:address node "<soap:address/>".

Conditions:
Creating a new content profile using a wsdl file which contains a "<soap:address/>" node which does not have a "location" attribute value.

When this content profile is saved, ASM attempts to create an associated URL with no value, which fails validation.

Impact:
After trying to save the content profile, you see an error message: "Could not create XML Profile; Error: DBD::mysql::db do failed: Column 'object_uri' cannot be null"

Workaround:
Delete the node "<soap:address/>" from the wsdl file


966461-7 : Tmm leaks memory after each DNSSEC query when netHSM is not connected

Component: Global Traffic Manager (DNS)

Symptoms:
Tmm memory increases per DNSSEC query.

Conditions:
NetHSM is configured but is disconnected

Impact:
Tmm high memory consumption.

Workaround:
Connect the netHSM.


965941-1 : Creating a net packet filter in the GUI does not work for ICMP for IPv6

Component: TMOS

Symptoms:
When using the GUI to create a 'net packet-filter' rule to block ICMP packets, the filter does not block IPv6 packets.

Conditions:
-- Using the GUI to create a packet filter rule to block incoming ICMP packets.
-- Attempting to block an IPv6 address.

Impact:
Packets get through the filter unexpectedly.

Workaround:
Modify the packet filter manually using tcpdump syntax. For example, the following syntax is used to block ICMP packets for both IPv4 and IPv6:

icmp or icmp6


965897-1 : Disruption of mcpd with a segmentation fault during config sync

Component: Advanced Firewall Manager

Symptoms:
The mcpd process on the peer device fails with a segfault, restarts and then segfaults again in a loop

Numerous messages may be logged in the "daemon" logfile of the following type:

emerg logger[2020]: Re-starting mcpd

Conditions:
-- High availability (HA) configuration
-- A port-and-address list configuration is changed to be only an address list
-- A config sync occurs

Impact:
Continuous restarts of mcpd process on the peer device.

Workaround:
One possible measure for getting the peer-machine "mcpd" out of its failure mode is to command the still-functioning system to push a "full" config sync to the appropriate device group. Doing this twice consecutively may be necessary.

  # tmsh run /cm config-sync force-full-load-push to-group APPROPRIATE-DEVICE-GROUP


965837-3 : When BIG-IP is configured with PingAccess profile, tmm can core when there is an active connection

Component: Access Policy Manager

Symptoms:
When BIG-IP is configured with a PingAccess profile and an SSL profile is associated with both the BIG-IP virtual server and a ping access configuration, an active connection to the virtual server may lead to a TMM crash.

Conditions:
-- SSL is configured on both the BIG-IP virtual server that contains the ping access profile and ping access configuration.
-- Active connection to the BIG-IP virtual server
-- Config sync is triggered or "tmsh load sys config" is triggered

Impact:
Traffic disrupted while tmm restarts.

Workaround:
No workaround.


965785-1 : Active/Standby sync process fails to populate table DCC.HSL_DATA_PROFILES on standby machine

Component: Application Security Manager

Symptoms:
DCC.HSL_DATA_PROFILES table on standby machine stay empty after sync process. Error for DB insert failure into table DCC.HSL_DATA_PROFILES thrown in asm_config_server.log.

Conditions:
There is no specific condition, the problem occurs rarely.

Impact:
Sync process requires an additional ASM restart

Workaround:
Restart ASM after sync process finished


965777-1 : Per-request policy authentication becomes unresponsive

Component: Access Policy Manager

Symptoms:
Per-request policy execution can appear to be slow during subroutine evaluation, and apmd appears to take a large amount of CPU.

Conditions:
The per-request policy is using subroutine to execute an authentication related agent that is dispatched to apmd for completion. These typically involve authentication agents that interact with an external authentication server, such as LDAP, RADIUS, or AD.

Impact:
Connectivity may be impaired or lost.

Workaround:
Failover the high availability (HA) pair, or restart apmd.


965457-5 : OSPF duplicate router detection might report false positives

Component: TMOS

Symptoms:
OSPF duplicate router detection might report false positives

Conditions:
Router sends LSA that is looped in network and sent back to its origin.

Impact:
Cosmetic


965229-1 : ASM Load hangs after upgrade

Component: Application Security Manager

Symptoms:
ASM upgrade hangs, and you see the following in
var/log/ts/asm_start.log:
-------------------------
asm_start|DEBUG|Nov 15 07:04:41.751|25365|F5::ConfigSync::restore_active_policies,,Restoring active policy - policy /Common/directenergy-mdu_custom_portal_v1 (id = 603)
asm_start|DEBUG|Nov 15 07:04:46.469|25365|F5::ConfigSync::restore_active_policies,,Restoring active policy - policy /Common/hachette-Web_EWH (id = 242)
 ... END OF FILE ...
-------------------------

In /var/log/asm:
-----------------------------
2020-11-15T06:01:23+00:00 localhost notice boot_marker : ---===[ HD1.cm6250 - BIG-IP 13.1.3.4 Build 0.255.5 <HD1.cm6250> ]===---
 info set_ibdata1_size.pl[20499]: Setting ibdata1 size finished successfully, a new size is: 9216M
 info tsconfig.pl[24675]: ASM initial configration script launched
 info tsconfig.pl[24675]: ASM initial configration script finished
 info asm_start[25365]: ASM config loaded
 err asm_tables_dump.pl[31430]: gave up waiting for ASM to start, please try again later
-----------------------------

Conditions:
-- ASM provisioned
-- 600+ security policies
-- Performing an upgrade

Impact:
ASM post upgrade config load hangs forever, without logs or errors

Workaround:
None.


965205-1 : BIG-IP dashboard downloads unused widgets

Component: TMOS

Symptoms:
The BIG-IP dashboard page downloads all widgets, even widgets that are not visible on the dashboard.

Conditions:
This occurs when viewing the BIG-IP dashboard.

Impact:
Slower-than-necessary GUI response, and the dashboard shows higher-than-necessary CPU utilization.

Workaround:
None.


965053-4 : [Regression of ID787881 & ID761032] DNSX fails to sign zone transfer using tsig key after failure

Component: Global Traffic Manager (DNS)

Symptoms:
DNSX fails to sign zone transfer using tsig key.

Conditions:
A transfer error occurs while DNSX is initializing.

Impact:
DNSX zones are not been updated.

Workaround:
Re-enter the tsig key secret.


965041-3 : SELinux permission issues leads to daemon startup failure

Component: TMOS

Symptoms:
SOD daemon keeps restarting and also other daemons including ssh are down.

In /var/log/ltm you see permission denied errors:
tenant-1 logger[13289]: Re-starting sod
tenant-1 err sod[13270]: 01140001:3: Shared mem error: Permission denied.
tenant-1 err sod[13270]: 01140035:3: Flock error Permission denied @183.
tenant-1 err sod[13270]: 01140001:3: Shared mem error: Permission denied.

Conditions:
The selinux context of files under /dev/shm is updated wrongly as system_u:object_r:initrc_state_t:s0 instead of system_u:object_r:tmpfs:s0 during upgrade.

Impact:
The functionality of SOD daemon including other daemons such as ssh will not be available.

Workaround:
Change the selinux mode to Permissive mode with below command
setenforce 0
and give "bigstart restart" to restart all the services.


965037-2 : SSL Orchestrator does not send HTTP CONNECT tunnel payload to services

Component: Local Traffic Manager

Symptoms:
In some cases, when Services in SSL Orchestrator (service-connect agent in per-request policy) is inserted after Category lookup for CONNECT request hostname, the HTTP CONNECT tunnel payload/data is not sent to services.

Conditions:
SSL Orchestrator use case and Services are inserted after Category lookup for CONNECT request hostname

Impact:
HTTP CONNECT tunnel payload is not sent to services

Workaround:
None


964989-3 : AFM DOS half-open does not handle wildcard virtual servers properly.

Component: Advanced Firewall Manager

Symptoms:
AFM DOS half-open vector does not handle wildcard virtual servers properly.

Conditions:
-- Wildcard virtual-server.
-- AFM DOS half-open vector configured.
-- Attacks towards multiple destinations covered by a single virtual-server.

Impact:
- Wrong statistics reporting.
- Wrong status of syncookie protection.
- Unexpected traffic drops.

Workaround:
Split wildcard virtual server into a series of /32 virtual servers.


964941-2 : IPsec interface-mode tunnel does not initiate or respond after config change

Component: TMOS

Symptoms:
After reconfiguring an interface-mode IPsec tunnel, the IPsec tunnel may fail to initiate or negotiate as a Responder.

Conditions:
-- IPsec interface mode
-- Changing the IPsec tunnel configuration

Impact:
Remote networks cannot be reached because BIG-IP refuses to negotiate IPsec tunnel.

Workaround:
Reboot or restart tmm


964897-1 : Live Update - Indication of "Update Available" when there is no available update

Component: Application Security Manager

Symptoms:
Live Update notifies you that an update is available even though there is no available update.

Conditions:
The latest file is installed but not present on the system and the second-latest file has an 'error' status

Impact:
Live Update erroneously indicates that an update is available.

Workaround:
1. upload the latest file that is not present on the system with scp to '/var/lib/hsqldb/live-update/update-files/'
2. restart 'tomcat' service:
> bigstart restart tomcat


964625-4 : Large blob size can result in MCP crash

Component: Advanced Firewall Manager

Symptoms:
If the blob size is too large, it can result in an MCPD crash.

Conditions:
Blob size too large.

Impact:
MCPD crash.

Workaround:
Reduce blob size slightly.


964585-2 : "Non OK return code (400) received from API call" is logged for ProtocolInspection auto update

Component: Protocol Inspection

Symptoms:
- Protocol Inspection autoupdate logs "Non OK return code (400) received from API call" when the F5 download site does not contain Protocol Inspection Update container for the BIG-IP version.

Conditions:
- Protocol Inspection auto update is enabled.
- The BIG-IP version does not have the ProtocolInspection container in the relevant download section on F5 downloads.

Impact:
- The error message does not accurately explain the cause of the problem.

Workaround:
None.


964533-1 : Multiple session_process_pending_event_callback ERROR: could not send callback messages get logged in the tmm logs

Component: TMOS

Symptoms:
The BIG-IP system tmm logs show multiple session_process_pending_event_callback errors.

Conditions:
This can occur while passing normal traffic, if a session is deleted before all the session db callback events are handled.

Impact:
Numerous error event entries found in the TMM log:
notice session_process_pending_event_callback ERROR: could not send callback to 10.10.10.10:460 - 10.10.10.10:80 ERR_NOT_FOUND.

There is no impact other than additional log entries.

Workaround:
None.


964421-1 : Error '01070734:3: Configuration error: Signing key and signing certificate must be set simultaneously'

Component: TMOS

Symptoms:
The error message '01070734:3: Configuration error: Signing key and signing certificate must be set simultaneously' is unclear.

It fails to indicate which rewrite profile has failed validation, and it is not clear that the error has something to do with the validation of rewrite profiles.

Conditions:
A BIG-IP Administrator is attempting to configure an invalid rewrite profile (one where the 'signing certificate' and 'signing key' options are not simultaneously set).

Impact:
A confusing error message is logged, which makes it difficult to know what to do next.


964125-1 : Mcpd cores while processing a query for node statistics when there are thousands of FQDN nodes and pool members.

Component: TMOS

Symptoms:
Mcpd might core and restart if it fails to process a query for all node statistics in less than 5 minutes.

There is more then one avenue where node statistics would be queried.

The BIG-IP Dashboard for LTM from the GUI is one example.

Conditions:
Thousands of FQDN nodes and pools with FQDN pool members and a query for all node statistics.

Impact:
Mcpd restarted which will cause services to failover. Traffic and configuration disrupted while mcpd restarts.


963705-4 : Proxy ssl server response not forwarded

Component: Local Traffic Manager

Symptoms:
A server response may not be forwarded after TLS renegotiation.

Conditions:
-- Proxy ssl enabled
-- A server renegotiation occurs

Impact:
Server response may not be not forwarded


963541-1 : Net-snmp5.8 crash

Component: TMOS

Symptoms:
Snmpd crashes.

Conditions:
This does not always occur, but it may occur after a subagent (bgpd) is disconnected.

Impact:
Snmpd crashes.


963485-2 : Performance issue with data guard

Component: Application Security Manager

Symptoms:
ASM clients encounter poor network performance, or bd crashes if the server response is large.

Conditions:
- The server response is compressed
- Data guard enabled.

Impact:
Slow responses or bd crash

Workaround:
- Disable data guard or block the data instead of masking it.
- Force server sending uncompressed response using iRule.
when HTTP_REQUEST {
HTTP::header remove Accept-Encoding
}


963461-2 : ASM performance drop on the response side

Component: Application Security Manager

Symptoms:
Clients encounter a longer time to respond from the BIG-IP

Conditions:
-- One of the following features is enabled:
   - convictions
   - csrf
   - ajax.
-- The response is HTML
-- The response has many tags

Impact:
Slow performance. May lead to a bd crash on specific responses. Traffic disrupted while bd restarts.


963017-1 : The tpm-status-check service shows System Integrity Status: Invalid when Engineering Hotfix installed

Component: TMOS

Symptoms:
Upon booting a BIG-IP hardware system running an Engineering Hotfix version of BIG-IP v14.1.0 or later, messages of the following form may be logged in the LTM log file (/var/log/ltm):

err tpm-status[####]: System Integrity Status: Invalid
info tpm-status-check[####]: System Integrity Status: Invalid

In addition, a message similar to the following may appear on the serial console while the system is booting:

[ ###.######] tpm-status-check[####]: Checking System Integrity Status
[ ###.######] tpm-status-check[####]: sh: /bin/rpm: Permission denied
[ ###.######] tpm-status-check[####]: tpm-status-check: System Integrity Status: Invalid

Similar messages appear when viewing the status of the tpm-status-check service via the systemctl utility:

# systemctl -l status tpm-status-check.service
* tpm-status-check.service - F5 Trusted Platform Module
   Loaded: loaded (/usr/lib/systemd/system/tpm-status-check.service; static; vendor preset: enabled)
   Active: failed (Result: exit-code) since <...>
 Main PID: #### (code=exited, status=1/FAILURE)

<...> tpm-status-check[####]: Checking System Integrity Status
<...> tpm-status-check[####]: sh: /bin/rpm: Permission denied
<...> tpm-status[####]: TPM Status Version 15.1.1.0.6.6
<...> tpm-status[####]: TMOS BIG-IP 15.1.1-0.0.6.0
<...> tpm-status[####]: BIOS 0614 v3.10.032.0
<...> tpm-status[####]: BIOS SIRR 2019-05-30_08-46-02
<...> tpm-status-check[####]: tpm-status-check: System Integrity Status: Invalid
<...> systemd[1]: tpm-status-check.service: main process exited, code=exited, status=1/FAILURE
<...> systemd[1]: Unit tpm-status-check.service entered failed state.
<...> systemd[1]: tpm-status-check.service failed.


However, checking the System Integrity Status using the 'tpm-status' or 'tmsh run sys integrity status-check' command shows 'System Integrity Status: Valid'.

Conditions:
This may occur under the following conditions:

-- Running BIG-IP v14.1.0 or later.
-- Using Engineering Hotfixes containing fixes for the following bugs:
   - ID893885 (https://cdn.f5.com/product/bugtracker/ID893885.html)
   - ID946745 (https://cdn.f5.com/product/bugtracker/ID946745.html)
-- Using hardware platforms that include a Trusted Platform Module (TPM), including:
   - BIG-IP i2000, i4000, i5000, i7000, i10000, i11000, i15000 Series appliances
   - VIPRION B4450 blades

Impact:
The tpm-status-check service inaccurately indicates that the System Integrity Status is not Valid.

This is incorrect, and conflicts with the accurate System Integrity Status provided by the 'tpm-status' utility and 'tmsh run sys integrity status-check' command.

Workaround:
To observe the correct System Integrity Status, do either of the following:
-- Use the 'tpm-status' utility.
-- Run the command:
tmsh run sys integrity status-check


962913-5 : The number of native open connections in the SSL profile is higher than expected

Component: Local Traffic Manager

Symptoms:
The number of native open connections in the SSL profile shows a value that is higher than expected.

Conditions:
SSL renegotiation is enabled. Other conditions are unknown.

Impact:
The SSL stats are incorrectly reading higher than expected.

Workaround:
Disable SSL renegotiation.


962605-5 : BIG-IP may go offline after installing ASU file with insufficient disk space

Component: TMOS

Symptoms:
When installing an ASU file, if there is not enough disk space in /var, the clntcp update file might become corrupted, causing datasyncd to be offline (and thus cause the entire BIG-IP offline)

Conditions:
-- ASM/FPS provisioned.
-- Installing ASU file.
-- Not enough space in /var partition.

Impact:
Device goes offline.

Workaround:
Delete the update file:
tmsh delete security datasync update-file /Common/datasync-global/update-file-clntcap_update_ (auto complete)


962589-3 : Full Sync Requests Caused By Failed Relayed Call to delete_suggestion

Component: Application Security Manager

Symptoms:
When using parent policies with learning enabled in an auto-sync device group, in some use cases deleting an ignored suggestion on a parent policy will cause a full sync to occur.
This can cause unexpected delays in configuration being synchronized between peers, and in the event of repeated instances in quick succession could fill the /var partition

Conditions:
1) Device Group with ASM and auto-sync enabled
2) Parent Policies with learning are in use.
3) Ignored Suggestions are deleted on the parent policy after they have 0 suggesting children left.

Impact:
ASM configuration requests a full sync which can cause unexpected slowness in config synchronization and may fill the /var partition if done multiple times in quick succession.
A full /var partition can lead to bd cores.


962497-1 : BD crash after ICAP response

Component: Application Security Manager

Symptoms:
BD crash when checking ICAP job after ICAP response

Conditions:
BD is used with ICAP feature

Impact:
Traffic disrupted while BD restarts.

Workaround:
N/A


962493-6 : Request is not logged

Component: Application Security Manager

Symptoms:
A request is not logged in the local and/or remote logs.

Conditions:
A request has evasions detected on very large parameters.

Impact:
A missing request in the log.

Workaround:
N/A


962489-6 : False positive enforcement of parameters with specific configuration

Component: Application Security Manager

Symptoms:
False positive parameters are being detected in the payload and enforced wrongly.

Conditions:
The URL is not defined (also not as wildcard - not defined at all) and the request has a payload.

Impact:
False positive enforcement - may lead to wrong violations and wrong blocking of requests.

Workaround:
None.


962433-5 : HTTP::retry for a HEAD request fails to create new connection

Component: Local Traffic Manager

Symptoms:
In case of a HEAD request, BIG-IP fails to set up a new connection to the server with the HTTP::retry iRule.

Conditions:
1.) Basic HTTP profile is configured on BIG-IP
2.) BIG-IP sends the HEAD request to the server and gets error response
3.) iRule with HTTP::retry is configured
4.) The system is using the default (non-debug) TMM version

Impact:
BIG-IP might send the retry HEAD request after the connection is closed, more specifically after the server has sent a FIN, the retry is leaked on the network.


962341-5 : BD crash on JSON payload

Component: Application Security Manager

Symptoms:
BD crashes when handling JSON payloads that does not conform with JSON content profile

Conditions:
JSON content profile is used in BD

Impact:
Traffic disrupted while BD restarts.

Workaround:
N/A


962333-1 : FIN from client does not get propagated to server side, if the FIN arrives before server side reaching ESTABLISHED

Component: Local Traffic Manager

Symptoms:
FIN from client will not be propagated to server side, if the FIN arrives in BIG-IP before the corresponding server side connection reaches ESTABLISHED.

Conditions:
- standard virtual server with the default tcp profile
- client sends FIN immediately after 3WHS

Impact:
These connections remain until the idle timeout is reached.

Workaround:
None


962181-1 : iRule POLICY command fails in server-side events

Component: Local Traffic Manager

Symptoms:
BIG-IP provides an iRule command POLICY to retrieve information on or manipulate an LTM policy attached to a virtual. This command fails when it is used in server-side event like HTTP_RESPONSE.

Conditions:
-- Configure a virtual server with one or more LTM policies.
-- The virtual server has an iRule with a POLICY command executed on a server side (e.g. HTTP_RESPONSE).

Impact:
A command returns an incorrect value and may cause unexpected outcomes in an iRule execution.


962177-1 : Results of POLICY::names and POLICY::rules commands may be incorrect

Component: Local Traffic Manager

Symptoms:
When a traffic policy is applied to a virtual server, the iRule commands POLICY::names and POLICY::rules returns incorrect results.

Conditions:
-- BIG-IP has a virtual server with one or more traffic policies having more than one rule.
-- An iRule with POLICY::names and/or POLICY::rules is applied to virtual server to run on multiple transactions over the same connection.

Impact:
Traffic processing may not provide expected results.


962069 : Memory leak in APM OCSP auth module

Component: Access Policy Manager

Symptoms:
There is a minor memory leak in OCSP auth module and leaks a small ammount of memory

Conditions:
The leak happens when certificate with AIA url is presented for verification.

Impact:
The leak is very small but over time it can lead to fragmentation in the memory and memory usage may increase.


961653-3 : Unable to retrieve DNS link statistics via SNMP OID gtmLinkStatRate

Component: Local Traffic Manager

Symptoms:
Unable to retrieve link statistics via SNMP OID gtmLinkStatRate

config # snmpwalk -c public localhost F5-BIGIP-GLOBAL-MIB::gtmLinkStatRate
F5-BIGIP-GLOBAL-MIB::gtmLinkStatRate = No Such Object available on this agent at this OID

Conditions:
A BIG-IP DNS/LC system configured with link objects.

Try to do an snmpwalk for F5-BIGIP-GLOBAL-MIB::gtmLinkStatRate which is not successful.

Impact:
BIG-IP DNS system link statistics cannot be retrieved via SNMP.

Workaround:
No workaround.


961509-1 : ASM blocks websocket frames with signature matched but Transparent policy

Component: Application Security Manager

Symptoms:
Websocket frames receive a close frame

Conditions:
-- ASM provisioned
-- ASM policy attached to a virtual server
-- Websocket profile attached to a virtual server
-- ASM policy transparent mode enabled

Impact:
Websocket frame blocked in transparent mode

Workaround:
Change signatures blocking settings to Learn = Yes, Alarm=Yes, Block=No


961001-1 : Arp requests not resolved for snatpool members when primary blade goes offline

Component: Local Traffic Manager

Symptoms:
Arp requests not resolved for snatpool members and traffic does not go through when the primary blade becomes offline.

Conditions:
-- VIPRION platforms serving as AAA and Diameter virtual server to load-balance.
-- route-domain configured other than 0.
-- Radius authentication pool and snatpool are configured.
-- Primary blade goes offline and new Primary is not elected.

Impact:
Traffic failure when primary became offline.

Workaround:
Disable primary blade which is offline.


960369-1 : Negative value suggested in Traffic Learning as max value

Component: Application Security Manager

Symptoms:
Negative value suggested in Traffic Learning as max value

Conditions:
A huge parameter value is seen in traffic

Impact:
Wrong learning suggestion issued

Workaround:
Manually change maximum allowed value on the parameter to ANY


960133 : AGC 8.0 installation failure

Component: Guided Configuration

Symptoms:
Attempting to install the AGC 8.0 results in the following error:

"Failed to load IApp artifacts from f5-iappslx-waf-bot-protection: java.lang.IllegalStateException: Failed to post template to block collection: ..."

Conditions:
The AGC is upgraded to a newer version via the "Access >> Guided Configuration" -> " Upgrade Guided Configuration".

Impact:
AGC 8.0 package is not installed.

Workaround:
Important: This workaround will delete all existing iApp configurations.

1. Download the latest AGC 8.0 package.
2. Open a new browser tab (first) and navigate to "Access >> Guided Configuration"
3. Open a new browser tab (second) and navigate to iApps >> Templates: Templates LX. Select all templates and click “Delete”.
4. In the second tab navigate to iApps >> Package Management LX. Select all existing packages and click “Uninstall”.
5. In the first tab click "Upgrade Guided Configuration" click and install the downloaded package.


960029-1 : Viewing properties for IPv6 pool members in the Statistics page in the GUI returns an error

Component: TMOS

Symptoms:
While attempting to view the properties for pool members via the Statistics page in the GUI, you see an error:

Instance not found: /Common/1234:80

Conditions:
-- A pool with at least one pool member with an IPv6 address.
-- Attempting to view the IPv6 pool member's properties via the Statistics page in the GUI.

Impact:
Unable to see the pool member's properties.

Workaround:
Use TMSH to view pool member properties:

# tmsh show ltm pool <pool name> members {<pool members>}


959629-1 : Logintegrity script for restjavad/restnoded fails

Component: TMOS

Symptoms:
The logintegrity script used to rotate the signature files for restnoded results in frequent cron errors similar to:

find: '14232restnoded_log_pattern': No such file or directory.

Conditions:
Logintegrity script is enabled.

Impact:
If logintegrity is enabled, the signature files for restnoded will not be in sync.

Workaround:
Modify the file /usr/bin/rest_logintegrity:

1. mount -o remount, rw /usr

2. cp /usr/bin/rest_logintegrity /usr/bin/rest_logintegrity_original

3. vi /usr/bin/rest_logintegrity

4. Replace the following line:

restnoded_log_pattern=/var/log/restnoded/restnoded.[1-9]*.log

With the line:

restnoded_log_pattern=/var/log/restnoded/restnoded[1-9]*.log

5. Replace the line:

wc_restnoded=$(find $$restnoded_log_pattern -cnewer $filename | wc -l)

With the line:

wc_restnoded=$(find $restnoded_log_pattern -cnewer $filename | wc -l)

6. mount -o remount, ro /usr


959613-1 : SIP/HTTPS monitor attached to generic-host virtual server and pool shows 'blank' reason

Component: Global Traffic Manager (DNS)

Symptoms:
When you double-monitor a Generic Host Virtual Server (pool level + virtual server level) using the same SIP/HTTPS monitor, the 'Reason' is omitted from the output. 'tmsh show gtm server <server> virtual-servers' shows a "blank" reason for monitoring failure/success.

Conditions:
Double-monitor a Generic Host virtual server (pool level + virtual server level) using the same SIP/HTTPS monitor.

Impact:
Impedes your ability to identify the failure/success reason quickly.

Workaround:
Do not use the same monitor on both the virtual server and the pool level.


959609-2 : Autodiscd daemon keeps crashing

Component: Advanced Firewall Manager

Symptoms:
Autodiscd daemon keeps crashing.

Conditions:
Issue is happening when high speed logging and auto discovery configuration are configured and send the traffic.

Impact:
Auto discovery feature is not working as expected

Workaround:
None.


959057-2 : Unable to create additional login tokens for the default admin user account

Component: TMOS

Symptoms:
When remote user authentication is configured, BIG-IP systems apply maximum active login token limitation of 100 to the default admin user account.

Conditions:
Remote Authentication is configured

Impact:
Unable to create more than 100 tokens for admin when remote authentication is configured


958833-2 : After mgmt ip change via GUI, brower is not redirected to new address

Component: TMOS

Symptoms:
After changing the management IP address via the GUI, the browser is not redirected, and reports Unable to connect BIG-IP device.

Conditions:
Change the Management IP address from the GUI and submit the change.

Impact:
Browser does not get redirected to the new address

Workaround:
Access the GUI by manually going to the new Management IP.


958785-7 : FTP data transfer does not complete after QUIT signal

Component: Local Traffic Manager

Symptoms:
When a QUIT signal is sent over an FTP connection to an FTP virtual server during a data transfer, the data connection is closed immediately instead of waiting until the transfer is complete.

Conditions:
- BIG-IP configured with an FTP virtual server
- A client connects to the FTP virtual server
- Client starts an FTP data transfer
- Client sends a QUIT signal before the data transfer completes.

Impact:
FTP data connections are closed prematurely, causing incomplete data transfers.

Workaround:
This does not occur if the FTP profile for the FTP virtual server has inherit-parent-profile set to enable.


958601-1 : In the GUI, searching for virtual server addresses does not match address lists

Component: TMOS

Symptoms:
In the GUI, if you filter the virtual server listing using an IP address, or part of an IP address, if there are any virtual servers that are using an address list that contains an address that matches that search string, those virtual servers will not show up in the search results.

Similarly, if you filter the virtual server listing using an IP address, or part of an IP address, if there are any virtual servers that are using an address that matches the search string, but are using a port list, those virtual servers will not show up in the search results.

Conditions:
-- Using Address Lists or Port lists with a virtual server.
-- Using the GUI to search for virtual servers based on address.

Impact:
Virtual servers that should match a search are not found.

Workaround:
None.


958465-1 : in BIG-IP Virtual Edition, TMM may prematurely shut down during initialization

Component: TMOS

Symptoms:
TMM may prematurely shut down during its initialization when several TMMs and interfaces are configured. The system logs messages in one or more TMM log files (/var/log/tmm*):

MCP connection aborted, exiting.

Conditions:
-- BIG-IP Virtual Edition (VE).
-- Happens during TMM startup.
-- The issue is intermittent, but is more likely to occur on systems with a lot of TMMs (more 20 in most cases) and several interfaces (approximately 8 or more).

Impact:
TMM shuts down prematurely. Traffic disrupted while tmm restarts. Possible deadlock and MCP restart loop requiring a full reboot of the BIG-IP device.

Workaround:
None.


958353-1 : Restarting the mcpd messaging service renders the PAYG VE license invalid.

Component: TMOS

Symptoms:
Upon mcpd service restart, the pay as you grow Virtual Edition license becomes invalid.

Conditions:
Restarting the mcpd messaging service.

Impact:
The license becomes expired. A message is displayed in the console:

mcpd[5122]: 01070608:0: License is not operational (expired or digital signature does not match contents).

Workaround:
If you cannot avoid restarting the mcpd messaging service, then you must issue the reloadlic command, or reboot the BIG-IP (using your preferred method).


958325-2 : Updating DNS pool monitor via transaction leaves dangling monitor_rule in MCP DB

Component: Global Traffic Manager (DNS)

Symptoms:
Dangling monitor rule after pool deletion.

# tmsh delete gtm monitor tcp tcp_test
01070083:3: Monitor /Common/tcp_test is in use

Conditions:
Using transaction to delete pool and create pool of same name with different monitor.

Impact:
Unable to delete the remaining monitor.

Workaround:
Run:
1. # bigstart restart mcpd
Or
2. Do not combine deletion and re-create pool in the same transaction.


958201 : 'Restrict to Single Client IP' option is missing in VMware iApp.

Component: Access Policy Manager

Symptoms:
'Restrict to Single Client IP' is available only in the access policy.

Conditions:
Configure VMware VDI using iApp.

Impact:
'Restrict to Single Client IP' option cannot be configured directly in the iApp.

Workaround:
'Restrict to Single Client IP' can be configured from the access policy.


958157-4 : Hash collisions in fastDNS packet processing

Component: Global Traffic Manager (DNS)

Symptoms:
FastDNS packet processing might cause unexpected traffic drops.

Conditions:
-- FastDNS is in use.

The problem is more likely to occur on a systems with a low number of TMMs.

Impact:
Unexpected traffic drops


958093-4 : IPv6 routes missing after BGP graceful restart

Component: TMOS

Symptoms:
When BGP graceful restart is configured for peers in IPv4 unicast and IPv6 unicast address families, after graceful restart for both IPv4 and Ipv6 address families, routes from IPv6 unicast address family might be missing.

Conditions:
- Different BGP peers configured in IPv4 unicast and IPv6 unicast address families.
- BGP graceful restart happens for both IPv4 unicast and IPv6 unicast.

Impact:
Routes from IPv6 peers are missing. They are also not present in the RIB.


958085-4 : IM installation fails with error: Spec file not found

Component: Traffic Classification Engine

Symptoms:
IM installation fails with an error message:

ERROR Error during switching: Spec file not found

Conditions:
This can occur when deleting an IM file that is actively installing on one volume, and the BIG-IP system is booted from another volume.

Impact:
Upgrading/Downgrading to another IM does not work until you install a new BIG-IP image on the same disk.

Workaround:
None.


957993-1 : Unable to set a port list in the GUI for an IPv6 address for a virtual server

Component: TMOS

Symptoms:
When creating a virtual server in the GUI with an IPv6 destination address and a port list (shared object), the system returns an error similar to:

"0107028f:3: The destination (0.0.0.0) address and mask (ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) for virtual server (vs1) must be be the same type (IPv4 or IPv6)."

Conditions:
-- Creating or updating a virtual server.
-- Attempting to use an IPv6 Host address with a Port List shared object.

Impact:
Unable to create/modify virtual server.

Workaround:
Create an Address List shared object with the IPv6 address in it and use that instead of the Host address.


957461-1 : Creating virtual server with IPv6 address or port list in destination should display source address in IPv6 format

Component: TMOS

Symptoms:
In the GUI, while creating a virtual server with an IPv6 address or a port list in destination, the BIG-IP system should display the source address in IPv6 format rather than IPv4 format 0.0.0.0/0.

Conditions:
This is encountered while creating a virtual server with an IPv6 address or port list in destination.

Impact:
The IPv6 address list is displayed in IPv4 notation.

Workaround:
This is a cosmetic issue. The correct addresses are used.


957321-2 : When BIG-IP contains an invalid DNS Resolver, Bot Defense might wrongly classify search engines as malicious

Component: Application Security Manager

Symptoms:
When the first DNS resolver is invalid, Bot Defense is unable to verify trusted bots, and is classifying them as malicious bots.

Conditions:
-- First DNS resolver in the list is invalid.
-- Bot Defense profile is attached to a virtual server.
-- Request from a search engine arrives.

Impact:
Bot Defense wrongly classifies valid search engines as malicious bots (and might block them if enforcement is enabled).

Workaround:
Fix the first DNS resolver in the list. It's possible that the first DNS resolver is the built in DNS resolver "f5-aws-dns".


957029-2 : MRF Diameter loop-detection is enabled by default

Component: Service Provider

Symptoms:
The default value of Message Routing Framework (MRF) Diameter loop detection is enabled.

Conditions:
Default diameter session profile loop detection configuration.

Impact:
System performance is impacted even if MRF Diameter loop detection is not used.

Workaround:
Disable loop detection in all message routing Diameter profiles when it is not needed.


956889-1 : /var fills up very quickly

Component: Application Security Manager

Symptoms:
Policy history files fill /var disk partition

Conditions:
Very large configuration with substantial history and config sync enabled

Impact:
ASM sync fails due to /var being full

Workaround:
The properties in '/etc/ts/tools/policy_history.cfg' file, for cleaning as a file-based configuration option, are a Support-oriented configuration option aimed to help in these cases.


956645-3 : Per-request policy execution may timeout.

Component: Access Policy Manager

Symptoms:
When attempting to access a resource that requires subsession validation, the client may receive an HTTP 503 "Service Unavailable" response, and the logs indicate that per-request policy execution time has expired.

Conditions:
Multiple connections are accessing the same subsession, triggering subsession lock contention.

Impact:
Some clients will fail to connect to their destination.

Workaround:
Add criteria to the gating criteria to enable more fine-grained subroutines to reduce subsession contention. For example, add category, or application name, to the gating criteria. In the case of API protection, consider concatenating credentials with the resource hostname (plus port).

Increase the per-request policy execution timeout value, controlled by the variable tmm.access.prp_global_timeout, to a higher value.


956625-1 : Port and port-list type are both stored in a traffic-matching-criteria object

Component: TMOS

Symptoms:
Using "tmsh load sys config replace file ..." to change a traffic matching criteria's port type from port to port-list (or vice-versa) results in both types ending up in the traffic matching criteria object.

Conditions:
-- Using traffic-matching-criteria.
-- Using "tmsh load sys config replace file ..." or "tmsh load sys config merge file ..." to change the port to a port-list (or vice-versa).

Impact:
-- System does not load the desired configuration.
-- Virtual servers may match/process more traffic than expected.


956589-3 : The tmrouted daemon restarts and produces a core file

Component: TMOS

Symptoms:
The tmrouted daemon restarts and produces a core file.

Conditions:
Exact trigger is unknown, but the issue was seen on a chassis setup during a blade failover

Impact:
Traffic disrupted while tmrouted restarts.

Workaround:
None


956373-1 : ASM sync files not cleaned up immediately after processing

Component: Application Security Manager

Symptoms:
Some ASM sync files remain on disk after config sync finishes. They remain until periodic clean-up tasks activate

Conditions:
-- ASM provisioned
-- BIG-IP devices are in a sync group
-- Relatively small "/var" partition

Impact:
If the files are large it may lead to "lack of disk space" problem.


956293-3 : High CPU from analytics-related REST calls - Dashboard TMUI

Component: TMOS

Symptoms:
When opening the GUI > Main > Statistics > Dashboard - the control plane CPU usage is around 7-15% on a completely empty system and Java consumes 3-5% CPU.

Conditions:
Leaving UI dashboard page left open.

Impact:
System performance is impacted if the dashboard page is kept open.


956109-1 : Modifying a traffic-matching-criteria with a port-list during a full sync may result in an incorrect configuration on the sync target

Component: TMOS

Symptoms:
In a device service cluster, changing a traffic-matching-criteria object's port configuration and then performing a full-sync will cause the sync target's traffic-matching-criteria ports to be modified incorrectly.

Once systems are in this state, further ConfigSyncs may result in these error messages:

err mcpd[6489]: 01070710:3: Database error (13), Cannot update_indexes/checkpoint DB object, class:traffic_matching_criteria_port_update status:13 - EdbCfgObj.cpp, line 127.
err mcpd[6489]: 01071488:3: Remote transaction for device group /Common/Failover to commit id 250 6869100131892804718 /Common/tmc-sync-2-bigip1.test 0 failed with error 01070710:3: Database error (13), Cannot update_indexes/checkpoint DB object, class:traffic_matching_criteria_port_update status:13 - EdbCfgObj.cpp, line 127..

Conditions:
-- Two or more BIG-IPs in a DSC.
-- Using traffic-matching-criteria, and making changes.

Impact:
BIG-IP configurations are out of sync (even though they show "In Sync"). Affected virtual servers will process more traffic than configured.

Workaround:
On an affected system, perform one of the two procedures to correct MCPD's in-memory configuration:

1. Remove the traffic-matching criteria from all virtual servers (or only affected virtual servers, if known), and then re-add the traffic-matching criteria.

2. Save the configuration and then follow the procedure in
K13030: Forcing the mcpd process to reload the BIG-IP configuration.

   tmsh save sys config
   clsh touch /service/mcpd/forceload
   clsh reboot


956105-1 : Websocket URLs content profiles are not created as expected during JSON Policy import

Component: Application Security Manager

Symptoms:
Websocket URLs content profiles are not created as expected during JSON Policy import

Conditions:
Import JSON Policy with Websocket URLs configured with content profiles.

Impact:
Content profiles are not being added to the webscket URLs causing wrong configuration.

Workaround:
The content profiles can be manually associated after the import process using REST or GUI.


956025-1 : HTTP profile response-chunking "unchunk" option does not remove Content-Length from response header

Component: Local Traffic Manager

Symptoms:
When the HTTP profile response-chunking option is set to "unchunk", chunked responses will be unchunked and the Transfer-Encoding header is removed.

If the server sends a chunked response with both Transfer-Encoding and Content-Length headers, Transfer-Encoding is removed but Content-Length is not. This causes the client to receive a response with an erroneous Content-Length header.

Conditions:
- HTTP virtual server with response-chunking set to "unchunk"
- Server response with both Transfer-Encoding and Content-Length headers present

Impact:
Malformed HTTP response received by client as length of response should be determined by closure of connection, not erroneous Content-Length header.

Workaround:
Implement iRule: at HTTP_RESPONSE time, remove the Content-Length header if the Transfer-Encoding header is also present.


956013-2 : System reports{{validation_errors}}

Component: Policy Enforcement Manager

Symptoms:
A {{validation_errors}} at Subscriber Management :: Control Plane Listeners and Data Plane Listeners with ipv6 addresses

Conditions:
Specifying an IPv6 address in the expression in Subscriber Management :: Control Plane Listeners and Policy Enforcement :: Data Plane Listeners.

Impact:
Cannot access the BIG-IP GUI through IPv6 address from any web browser. Admin/User cannot enter input through GUI.

Workaround:
None.


955953-1 : iRule command 'table' fails to resume when used with Diameter 'irule_scope_msg'

Component: TMOS

Symptoms:
'table' command fails to resume causing processing of traffic to halt due to 'irule_scope_msg' causing iRule processing to proceed in a way that 'table' does not expect.

Conditions:
- iRule using 'table' command
- Diameter 'irule_scope_msg' enabled

Impact:
Traffic processing halts (no crash)


955897-1 : Upgrade failure with virtual-address in non-default route domain: fails to load config

Component: TMOS

Symptoms:
Configuration does not load after upgrade. The BIG-IP system reports an error while upgrading:

err mcpd[21812]: 0107028b:3: The source (0.0.0.0%100) and destination (0.0.0.0) addresses for virtual server (/Common/vs1) must be in the same route domain.
Unexpected Error: Loading configuration process failed.

Conditions:
-- Create a virtual server/virtual address.
-- Use the non-default route-domain partition

Example:
tmsh create net route-domain 100
tmsh create ltm virtual-address vs1 address any%100
tmsh create ltm virtual vs1 destination any%100:0
tmsh save sys config

Impact:
The configuration does not load when the device is rebooted or when mcpd is restarted.

Workaround:
None.


955617-1 : Cannot modify the destination address of a monitor

Component: Local Traffic Manager

Symptoms:
Modifying monitor properties gives error, if it is attached to a pool with Node/Pool member instance.

0107082c:3: Cannot modify the destination address of monitor /Common/my_monitor

Conditions:
-- Monitor with alias address field as default properties.
-- Pool containing a node or pool member.
-- Monitor is attached to the pool.

Impact:
Monitor properties can't be modified if they are in use by a pool.

Workaround:
Remove monitor, modify it, and then add it back.


955593-1 : "none" missing from the error string when snmp trap is configured with an invalid network type

Component: TMOS

Symptoms:
When you try to configure an SNMP trap with an invalid network type, you get a confusing error:

01070911:3: The requested enumerated (aaa) is invalid (, mgmt, other) for network in /Common/snmpd trapsess (/Common/i2_2_2_1_1)

Conditions:
SNMP trap is configured with an invalid network enum type.

Impact:
The word 'none' is not shown in the error string.


955057-1 : UCS archives containing a large number of DNS zone files may fail to restore.

Component: TMOS

Symptoms:
This issue can manifest in the following ways:

- Failure to restore a UCS archive to the currently active boot location (i.e. restoring a backup).

- Failure to restore a UCS archive to a different boot location by means of using the cpcfg utility (or the the "Install Configuration" option when changing boot locations in the Web UI).

- Failure to restore a UCS archive as part of a software upgrade (if rolling forward the configuration was requested, which is the default BIG-IP behavior).

In all cases, error messages similar to the following example are returned to the user:

/bin/sh: /bin/rm: Argument list too long
Fatal: executing: /bin/sh -c rm -fr /var/named/config/namedb/*
Operation aborted.
/var/tmp/configsync.spec: Error installing package
Config install aborted.
Unexpected Error: UCS loading process failed.

Conditions:
This issue occurs when a large number of DNS zone files are already present in the /var/named/config/namedb directory of the boot location to which the UCS archive is being restored.

Impact:
The UCS archive fails to restore. Additionally:

- If the UCS archive was being restored on the currently active boot location, the named and zrd daemons may not be running after the failure, leading to traffic outages.

- If the UCS archive was being restored as part of an upgrade, the installation will fail and the destination boot location will be marked as failed (thus preventing a BIG-IP Administrator from activating it).

Workaround:
Depending on the failure mode, perform one of the following workarounds:


- If you were restoring a UCS archive on the currently active boot location, run the following command, and then attempt the UCS archive restore operation again:

find /var/named/config/namedb -mindepth 1 -delete

- If you encountered the failure during an upgrade, it should mean you were installing an Engineering Hotfix (otherwise the /var/named/config/namedb directory on the destination boot location would have been empty).

Installing an Engineering Hotfix will actually perform two separate installations - first the base version, and then the hotfix on top of that. Each installation restores the source location's UCS archive.

The UCS installation performed during the base installation will work, and the one performed during the hotfix installation will fail (because DNS zone files are already in place now, and they will fail to be deleted).

In this case, you can work around the issue by performing two distinct installations (to the same destination boot location). First the base version by itself, and then the hotfix installation by itself:

Perform the first installation with the liveinstall.moveconfig and liveinstall.saveconfig db keys disabled. Perform the second installation after enabling the liveinstall.moveconfig and liveinstall.saveconfig db keys again.

- If you encountered the failure while using the cpcfg utility (or equivalent WebUI functionality), take a UCS archive instead, download it off of the BIG-IP or save it in a shared directory (e.g. /var/tmp), boot the system into the destination boot location, run the below command, and then restore the UCS archive:

find /var/named/config/namedb -mindepth 1 -delete


955017-1 : Excessive CPU consumption by asm_config_event_handler

Component: Application Security Manager

Symptoms:
Asm_config_event_handler is consuming a lot of CPU while processing signatures after sync

Conditions:
This is encountered during a UCS load, or by a high availability (HA) configuration sync.

Impact:
Asm_config_server_rpc_handler.pl consumes excessive CPU and takes an exceedingly long time to complete.

Workaround:
Disable the signature staging action item for all policies.


953477-2 : Syncookie HW mode not cleared when modifying VLAN config.

Component: TMOS

Symptoms:
Changing VLAN configuration can cause BIG-IP get stuck in hardware syncookie mode.

Conditions:
- Changing VLAN configuration when vlan-based syncookies are active.

For a list of platforms that support hardware syncookie protection, see https://support.f5.com/csp/article/K14779

Impact:
Device is stuck in hardware syncookie mode and generates syncookies.

Workaround:
Run the following command:
tmsh restart sys service tmm

Impact of workaround: restarting tmm disrupts traffic.


953425-4 : Hardware syncookie mode not cleared when changing dos-device-vector enforcement

Component: Advanced Firewall Manager

Symptoms:
Changing DOS vector enforcement configuration can cause BIG-IP to get stuck in hardware syncookie mode.

Conditions:
- Changing DOS vector enforcement configuration when device is in global syncookie mode.

For a list of platforms that support hardware syncookie protection, see https://support.f5.com/csp/article/K14779

Impact:
Device is stuck in hardware syncookie mode and generates syncookies.

Workaround:
Run the following command:
tmsh restart sys service tmm

Impact of workaround: restarting tmm disrupts traffic.


952509-3 : Cross origin AJAX requests are blocked in case there is no Origin header

Component: Application Security Manager

Symptoms:
When using Single Page Application, if a CORS request is sent without an Origin, the "Access-Control-Allowed-Origin" header is not set and the request is blocked.

Conditions:
-- ASM policy / DoS (with application) profile / Bot Defense Profile are attached to VS, with a "Single Page Application" flag enabled.
-- Client is using dosl7.allowed_origin option
-- CORS Request is sent without an Origin header.

Impact:
Request is blocked.

Workaround:
Use an iRule to add the Origin header according to the domain in the Referrer header.


950953-2 : Browser Challenges update file cannot be installed after upgrade

Component: Application Security Manager

Symptoms:
After upgrading BIG-IP, the Browser Challenges factory default update file cannot be installed, and you see this error:

Installation error: gpg: WARNING: unsafe ownership on homedir `/usr/share/live-update/share/gpg/browser_challenges_genesis_load'gpg: encrypted with 1024-bit ELG key, ID 7C3E3CE5, created 2007-03-20 "asm_sigfile_installer"gpg: Signature made Mon Aug 2

Conditions:
The new file that comes with the installation is ready to install

Impact:
New updated cannot be installed

Workaround:
There are 2 options:
1. download a new version of the update file (if exists)
2.
   2.1 download a copy of that file from the machine to your locale machine
   2.2 rename it :
       > cp BrowserChallenges_20200722_072935.im BrowserChallenges_<CURRENT_DATE>_<CURRENT_TIME>.im
       ## the date and time are for tracking and the have to be in a specific format DATE : YYYYMMDD, TIME: HHMMSS
   2.3 upload the file and install it manually from the LiveUpdate screen.


950849-5 : B4450N blades report page allocation failure.

Component: TMOS

Symptoms:
Despite having free memory, the BIG-IP system frequently logs kernel page allocation failures on B4450N blades to the /var/log/kern.log file like the following:

swapper/16: page allocation failure: order:2, mode:0x104020

After that, a stack trace follows. Note that the process name in the line ('swapper/16', in this example) varies. You may see generic Linux processes or processes specific to F5 in that line.

Conditions:
This occurs on B4450N blades regardless of configuration.

Impact:
As different processes can experience this issue, the system may behave unpredictably. For example, it is possible for a TMOS installation to fail as a result of this issue. Other processes may not exhibit any side effect as a result of this issue. The exact impact depends on which process becomes affected and how this process is designed to handle such a failure to allocate memory.

Workaround:
You must perform the workaround on each blade installed in the system.

-- If you want the workaround to survive reboots only, perform the following procedure:

1) Log on to the advanced shell (BASH) of the primary blade of the affected VIPRION system.

2) Run the following commands:

# clsh "sysctl -w vm.min_free_kbytes=131072"
# clsh "echo -e '\n# Workaround for ID950849' >> /etc/sysctl.conf"
# clsh "echo 'vm.min_free_kbytes = 131072' >> /etc/sysctl.conf"

-- If you want the workaround to survive reboots, upgrades, RMAs, etc., perform the following procedure:

1) Log on to the advanced shell (BASH) of the primary blade of the affected VIPRION system.

2) Run the following commands (with the desired amount in KB):

# clsh "sysctl -w vm.min_free_kbytes=131072"
# echo -e '\n# Workaround for ID950849' >> /config/startup
# echo 'sysctl -w vm.min_free_kbytes=131072' >> /config/startup

Note that the last two commands are not wrapped inside 'clsh' because the /config/startup file is already automatically synchronized across all blades.

Once the issue is fixed in a future BIG-IP version, remove the workarounds:

-- To remove the first workaround:

1) Edit the /etc/sysctl.conf file on all blades and remove the added lines at the bottom.

2) Reboot the system by running 'clsh reboot'. This will restore the min_free_kbytes kernel parameter to its default value for the BIG-IP version you are running.

-- To remove the second workaround:

1) Edit the /config/startup file on the primary blade only, and remove the extra lines at the bottom.

2) Reboot the system by running 'clsh reboot'. This restores the min_free_kbytes kernel parameter to its default value for the BIG-IP version you are running.

To verify the workaround is in place, run the following command (this should return the desired amount in KB):

# clsh "cat /proc/sys/vm/min_free_kbytes"


950673-4 : Hardware Syncookie mode not cleared when deleting/changing virtual server config.

Component: TMOS

Symptoms:
Modifying a virtual server can cause BIG-IP to get stuck in hardware syncookie mode.

Conditions:
-- A virtual server is in hardware syncookie mode.
-- Modifying or deleting the virtual server

For a list of platforms that support hardware syncookie protection, see https://support.f5.com/csp/article/K14779

Impact:
Device is stuck in hardware syncookie mode and generates syncookies.

Workaround:
tmsh restart sys service tmm

Impact of workaround: restarting tmm disrupts traffic.


950305-1 : Analytics data not displayed for Pool Names

Component: Application Visibility and Reporting

Symptoms:
You cannot see reports (statistics->analytics->pool) when you choose to view by pool names.

Conditions:
This is encountered in the statistics screen.

Impact:
You can't see the statistics->analytics->pool report when you choose view by pool names.


950201-2 : Tmm core on GCP

Component: TMOS

Symptoms:
When BIG-IP Virtual Edition is running on GCP with mergeable buffers enabled, tmm might core while passing traffic. Subsequently, the kernel locks up which prevents the whole system from recovering.

Conditions:
- BIG-IP Virtual Edition running on GCP.
- Mergeable buffers (mrg_rxbuf) is enabled on the guest with direct descriptors.

Impact:
Traffic disrupted while tmm restarts.


950005-1 : TCP connection is not closed when necessary after HTTP::respond iRule

Component: Local Traffic Manager

Symptoms:
HTTP does not close the TCP connection on the client if response is sent via HTTP::respond.

Conditions:
- TCP profile is used.
- HTTP profile is used.
- HTTP::respond iRule is used (via HTTP_RESPONSE_RELEASE).
- HTTP sends "Connection: close" header.

Impact:
TCP connection lives longer than needed.

Workaround:
None


949721-1 : QUIC does not send control frames in PTO packets

Component: Local Traffic Manager

Symptoms:
When the QUIC PTO timer fires, it may resend some in-flight data. That data will not include any in-flight control frames.

Conditions:
A control frame is in-flight when the PTO timer fires.

Impact:
Minimal. The PTO timer is a mechanism to 'get ahead' of any lost packets and if a packet containing control frames is lost, those frames will be retransmitted.

Workaround:
None.


949593-4 : Unable to load config if AVR widgets were created under '[All]' partition

Component: Application Visibility and Reporting

Symptoms:
When upgrading to or loading saved configuration on BIG-IP software v13.0.0 or later, if the configuration contains AVR widgets created under a partition of '[All]', the config load fails.

Conditions:
This occurs if one or more AVR widgets in the configuration was created under the read-only '[All]' pseudo-partition.
This could have occurred if you were running a version of BIG-IP which did not include the fix for ID 721408.

Impact:
Upgrading to or loading an affected configuration on BIG-IP v13.x or later fails.

Workaround:
Manually edit the /config/bigip.conf configuration file and change '[All]' to 'Common':

# sed -i 's/\\\[All\]/Common/g' /config/bigip.conf
# tmsh load sys config
# tmsh save sys config

This should be done before upgrading to BIG-IP v13.x or later, or before saving configuration to be loaded later, or before loading a saved configuration from the config files.


949477-3 : NTLM RPC exception: Failed to verify checksum of the packet

Component: Access Policy Manager

Symptoms:
NTLM authentication fails with the error:

RPC exception: Failed to verify checksum of the packet.

Conditions:
-- Start nlad process with 'encryption'.
-- Configure a user, and map that user to a huge number of groups.
-- Configure NTLM front-end authentication.

Impact:
User authentication fails.

Workaround:
1. Run the 'nlad' process with '-encrypt no' in the file /etc/bigstart/startup/nlad.

2. Disable encryption for nlad:
   # vim /etc/bigstart/startup/nlad

   change:
   exec /usr/bin/${service} -use-log-tag 01620000

   to:
   exec /usr/bin/${service} -use-log-tag 01620000 -encrypt no

3. Restart nlad to make the change effective, and to force the schannel to be re-established:
   # bigstart restart nlad


949137-2 : Clusterd crash and vCMP guest failover

Component: Local Traffic Manager

Symptoms:
Clusterd crashes and a vCMP guest fails over.

Conditions:
The exact conditions under which this occurs are unknown. It can occur during normal operation.

Impact:
Memory corruption and clusterd can crash, causing failover.

Workaround:
None.


949105-1 : Error log seen on Category Lookup SNI requests for same connection

Component: Access Policy Manager

Symptoms:
Client connections are reset and you see an error in /var/log/apm : "(ERR_NOT_FOUND) Category Lookup failed or a Category Lookup agent is not present in the policy before Response Analytics"

Conditions:
-- Category Lookup agent (lookup type SNI) in the per-request policy before Request or Response Analytics agent
-- Multiple requests sent in the same SSL connection.

Impact:
Connections are reset or they follow the fallback branch for subsequent requests in the same SSL connection


948717-2 : F5-pf_daemon_cond_restart uses excessive CPU

Component: TMOS

Symptoms:
The script /etc/init.d/f5-pf_daemon_cond_restart spawns a lot of ephemeral processes that collectively use about 10-15% of a core, regardless of the number of cores.

This is contributing to higher CPU usage after upgrading from an earlier version

Conditions:
On upgrade to a 15.1.x version, high CPU usage is observed.

Impact:
Higher CPU utilization on control plane, typically the equivalent of about 10-15% (of one core) extra.

Workaround:
None.


948573-5 : wr_urldbd list of valid TLDs needs to be updated

Component: Traffic Classification Engine

Symptoms:
Several new TLDs have been added and need to be classified. The classification results return "Unknown" when the new TLD is being queried.

Conditions:
New TLD is being queried

Impact:
The URL query with new TLDs can not be blocked with custom feed list.
Custom, Webroot, and Cloud returns Unknown category.

Workaround:
Configure CPM policy to classify traffic based on hostname or SNI rather than urlcat.


948417-3 : Network Management Agent (Azure NMAgent) updates causes Kernel Panic

Component: Performance

Symptoms:
- TMM crashes
- kernel panics
- BIG-IP core file created
- Cloud Failover Extension unexpected behavior (where applicable)

Conditions:
- BIG-IP Azure Virtual Edition
- Azure Host performs a Network Management Agent (NMAgent) update while TMM is running
- BIG-IP VE using Accelerated Networking

Impact:
- Traffic disrupted while tmm restarts
- BIG-IP restarts
- Cloud Failover Extension state data lost (where applicable)

Workaround:
- Disable Accelerated Networking on BIG-IP network interfaces (Reversed settings from Azure documentation)

     Individual VMs & VMs in an availability set
     First stop/deallocate the VM or, if an Availability Set, all the VMs in the Set:
           Azure CLI
                az vm deallocate \
                --resource-group myResourceGroup \
                --name myVM
    Important, please note, if your VM was created individually, without an availability set, you only need to stop/deallocate
    the individual VM to disable Accelerated Networking. If your VM was created with an availability set, all VMs contained in
    the availability set will need to be stopped/deallocated before disabling Accelerated Networking on any of the NICs.

    Once stopped, disable Accelerated Networking on the NIC of your VM:
           Azure CLI
                az network nic update \
                --name myNic \
                --resource-group myResourceGroup \
                --accelerated-networking false
    Restart your VM or, if in an Availability Set, all the VMs in the Set and confirm that Accelerated Networking is disabled:
           Azure CLI
                az vm start --resource-group myResourceGroup \
                --name myVM


948113-2 : User-defined report scheduling fails

Component: Application Visibility and Reporting

Symptoms:
A scheduled report fails to be sent.

An error message with the following format may appear on /var/log/avr/monpd.log file (some parts of the error message were replaced with '.....' in here to leave only the common parts):
     DB|ERROR|....... Error (err-code 1054) executing SQL string :
.....
.....
.....
 Because : Unknown column ....... in 'order clause'

Conditions:
1. Using predefined-report in scheduled-report.
2. Predefined-report has more than one measure.
3. Sort-by value is different from the first measure on predefined-report

Impact:
Internal error for AVR report for ASM pre-defined.

Workaround:
First, remount /usr to read-write:
mount -o remount,rw /usr

Next, open file /usr/share/perl5/vendor_perl/F5/AVReporter/Client.pm and change the following line:
push(@measures,@{$base_request->{measures}}[0]);
to this:
push(@measures,@{$base_request->{sort_by}}[0]->{measure});

The above can be achieved with the following script-line (please first backup the Client.pm file and then verify it changed it correctly):
sed -i 's/push(@measures,@{\$base_request->{measures}}\[0\])/push(@measures,@{$base_request->{sort_by}}[0]->{measure})/' /usr/share/perl5/vendor_perl/F5/AVReporter/Client.pm

Lastly, remount /usr back to read-only:
mount -o remount,ro /usr


948065-2 : DNS Responses egress with an incorrect source IP address.

Component: Local Traffic Manager

Symptoms:
DNS responses over a certain size egress the BIG-IP with an incorrect source IP address set.

Conditions:
Large responses of ~2460 bytes from local BIND

Impact:
The response to the client appears to be coming from the wrong source IP address, and the request fails.

Workaround:
Change 'max-udp-size' in BIND to a smaller value reduces the size of response, which stops the fragmentation.

Note: This workaround has limitations, as some records in 'Additional Section' are truncated.


947937-1 : HTTP iRule commands may fail to execute within the "fallback-host" HTTP profile field.

Component: Local Traffic Manager

Symptoms:
The BIG-IP system can redirect a request to a fallback host when the target pool is unavailable. If the configured fallback host within the HTTP profile contains HTTP iRule commands such as HTTP::host or HTTP::uri, the corresponding HTTP request can fail. A connection reset may be encountered instead.

Conditions:
- HTTP profile with "fallback-host" profile option configured containing an HTTP iRule command.

Impact:
When utilizing the HTTP profile with "fallback-host" profile option with HTTP iRule commands, incorrect connection resets can be seen by the client instead of the correct HTTP response.

Workaround:
Attaching an iRule containing HTTP::redirect or similar command to the virtual server can be used instead of the fallback host-profile option to redirect traffic to another virtual server.


947865-1 : Pam-authenticator crash - pam_tacplus segfault or sigabort in tac_author_read

Component: TMOS

Symptoms:
Pam-authenticator cores. There is a log message in /var/log/user/log:

err pam-authenticator: tac_author_read: short author header, -1 of 12: Connection reset by peer

Conditions:
-- TACACS auth configured on BIG-IP
-- A BIG-IP user authenticates and the user is a TACACS user
-- The TACACS server resets the connection.

Impact:
Pam-authenticator fails with segfault or sigabrt, and the user is unable to authenticate to BIG-IP.


947745-2 : Tcp proxy does not ignore HUDEVT_CHILD_CONNECTED and gives an error

Component: Local Traffic Manager

Symptoms:
Tcp proxy does not ignore HUDEVT_CHILD_CONNECTED and gives an error message:
hud_tcp_serverside_handler/3676: 6.0.0.20.21 - 6.6.6.1.51147: unexpected serverside message HUDEVT_CHILD_CONNECTE

Conditions:
FTP profile is in use

Impact:
Logs entries in the log file

Workaround:
None


947341-2 : Mysql generates multiple error 24 (too many files open) for PRX.REQUEST_LOG DB tables files

Component: Application Security Manager

Symptoms:
1) var/lib/mysql/mysqld.err is filled with log entries containing:
------------
  200824 11:04:43 [ERROR] mysqld: Can't open file: './PRX/REQUEST_LOG.frm' (errno: 24)
  200824 11:18:46 [ERROR] mysqld: Can't open file: './PRX/REQUEST_LOG.frm' (errno: 24)
  200824 11:35:58 [ERROR] mysqld: Can't open file: './PRX/REQUEST_LOG.frm' (errno: 24)
------------

2) There are a lot of PRX.REQUEST_LOG partitions, in some cases up to 1024, many of which are empty.

Conditions:
ASM/AVR provisioned

Impact:
Mysql out of resources when opening files
PRX.REQUEST_LOG Corrupt

Workaround:
0) in case /appdata partition is filled up to 100% and mysql restarts continuously -
    https://support.f5.com/csp/article/K14956
    https://support.f5.com/csp/article/K42497314

1) Look into -
    SELECT * FROM INFORMATION_SCHEMA.PARTITIONS WHERE table_name = 'REQUEST_LOG' AND table_schema = 'PRX'\G
to identify all the empty partitions.

2) Manually (or via shell script) execute this sql -
   ALTER TABLE PRX.REQUEST_LOG DROP PARTITION empty_partition_name
where "empty_partition_name" is the partition name as "p100001" for every partition that is empty.

4) increase 'open_files_limit' to '10000'.
--------------------------------
In /etc/my.cnf file:
1. Change the value of the 'open_files_limit' parameter to 10000.
2. Restart MySQL:
   bigstart restart mysql
--------------------------------

5) pkill asmlogd

Note: This workaround does not survive upgrade. It must be reapplied after every upgrade until the upgraded version contains a fix.


947217-6 : Fix of ID722682 prevents GTM config load when the virtual server name contains a colon

Component: Global Traffic Manager (DNS)

Symptoms:
GTM is unable to load the configuration.

Conditions:
-- GTM has been upgraded to a version with fix for ID722682 from a version that does not have the fix for ID722682
-- A GTM server has a name with no colon
-- That GTM server has a virtual server with colon in the name
-- That virtual server is added to a pool

Impact:
GTM config file cannot be loaded successfully after upgrade.

Workaround:
Edit bigip_gtm.conf manually to delete "\\" or replace colon ":" with other non-reserved char. such as "-".


947125-1 : Unable to delete monitors after certain operations

Component: Local Traffic Manager

Symptoms:
Unable to delete monitor with an error similar to:

01070083:3: Monitor /Common/my-mon is in use.

Conditions:
-- HTTP monitors are attached directly to pool members, or node-level monitors exist.
-- Performing an operation that causes the configuration to get rebuilt implicitly, such as "reloadlic".

Impact:
Unable to delete object(s) no longer in use.

Workaround:
When the system gets into this state, save and reload the configuration:
tmsh save sys config && tmsh load sys config


946745-1 : 'System Integrity: Invalid' after Engineering Hotfix installation

Component: TMOS

Symptoms:
The 'tmsh run sys integrity status-check -a -v' or 'tpm-status' commands incorrectly report system integrity status as 'Invalid' even when the system software has not been modified.

Conditions:
This occurs if all of the following conditions are true:

-- BIG-IP software v14.1.0 or later version.
-- Engineering Hotfix installed on TPM-supported BIG-IP platform.
-- The Engineering Hotfix contains a fix for ID893885 (https://cdn.f5.com/product/bugtracker/ID893885.html).
-- The Engineering Hotfix contains an updated 'sirr-tmos' package.

Impact:
Incorrect presentation of system software status; the status shows INVALID when it is actually valid.

Workaround:
None.


946185-2 : Unable to view iApp component due to error 'An error has occurred while trying to process your request.'

Component: TMOS

Symptoms:
When accessing the iApp Components tab, the system presents an error similar to the following:

An error has occurred while trying to process your request.

Conditions:
-- With or without Partitions configured.
-- Navigate to GUI iApps :: Application Services : Applications, to view a custom iApp.
-- More likely to occur after upgrade.

Impact:
Unable to view/modify iApps via GUI iApps :: Application Services : Applications screen.

Workaround:
To reconfigure the iApp, do the following:

1. Navigate to the following location in the GUI:
Local Traffic :: Virtual Server List

2. Click the Application Link :: Reconfigure.

Note: Although this allows you to reconfigure an iApp, it does not provide access to the iApp application details Components page.


946089-3 : BIG-IP might send excessive multicast/broadcast traffic.

Component: TMOS

Symptoms:
BIG-IP might transmit excessive multicast/broadcast traffic.

Conditions:
-- BIG-IP Virtual Edition with more than one TMM.
-- Number of excessive packets is directly proportional to the number of TMMs.

Impact:
Excessive multicast/broadcast traffic.


945997-1 : LTM policy applied to HTTP/2 traffic may crash TMM

Component: Local Traffic Manager

Symptoms:
When an LTM policy is applied to HTTP/2 traffic and refers to TCL expression(s), TMM may crash.

Conditions:
-- A virtual is configured with http and http2 profiles.
-- An LTM policy is published and refers to TCL expression(s).
-- The policy is attached to the virtual server.

Impact:
Traffic disrupted while tmm restarts.


945601-5 : An incorrect LTM policy rule may be matched when a policy consists of multiple rules with TCP address matching conditions.

Component: Local Traffic Manager

Symptoms:
An incorrect LTM policy rule is picked up e.g. a rule which should match first is omited.

Conditions:
Policy contains multiple rules which employ TCP address matching condition.

Impact:
Inocorrect LTM policy is applied.


945413-1 : Loop between keymgmtd and mcpd causes BIG-IP to be out of sync or in constant automatic config sync

Component: TMOS

Symptoms:
BIG-IP systems in a device group do not stay in sync if config sync is manual and constantly syncs if config sync is automatic.

The BIG-IP system constantly downloads the certificate bundle if the CA-bundle manager config includes a URL.

Conditions:
The CA-bundle manager is configured.

Impact:
The keymgmtd and mcpd process gets into a loop that causes constant config changes and if the ca-bundle-manager includes a URL, the BIG-IP system constantly downloads the bundle.


945189-4 : HTTPS monitor fails due to missing ECDHE-RSA-AES256-CBC-SHA

Component: Local Traffic Manager

Symptoms:
After upgrade, the 'DEFAULT' cipher in the serverssl profile attached to the HTTPS monitor does not include "ECDHE-RSA-AES256-CBC-SHA" cipher suite in the Client Hello.

Conditions:
After upgrade, HTTPS monitor cipherlist is read from serverssl profile ciphers and set to DEFAULT after upgrade.

Impact:
Upgrade breaks the SSL pool monitoring.

Workaround:
Set ciphers as DEFAULT:+SHA:+3DES:+EDH for profile server-ssl


944785-4 : Admd restarting constantly. Out of memory due to loading malformed state file

Component: Anomaly Detection Services

Symptoms:
Admd consumes more than 10GB of RSS
Wrong signature statistics and possible memory corruption, potentially results in high memory consumption.

Conditions:
-- Upgrading from 13.x, 14.x to 15.x
-- Device service clustering configuration
-- App-Protect-DOS signatures configured.

Impact:
ADMD not working, ADMD constantly restarting, consuming all of the system memory. Out of memory. ADMD killed due to memory consumption

Workaround:
Make sure that all the devices within a cluster are running compatible state file version (either all with versions before 15.1.0.x or after), if not, then:
1. Stop ADMD on all of those devices: bigstart stop admd
2. Upgrade or Downgrade the BIG-IP version to match the above criteria.
3. Remove the old state files: rm -rf /var/run/adm/*
4. Start ADMD: bigstart start ADMD

If there is an issue on a single blade device, then:
1. Stop ADMD on all of those machines: bigstart stop admd
2. Remove the old state files: rm -rf /var/run/adm/*
3. Start ADMD: bigstart start ADMD


944513-3 : Apache configuration file hardening

Component: TMOS

Symptoms:
Apache configuration file did not follow security best practice.

Impact:
Apache configuration file did not follow security best practice.

Workaround:
None


944485-6 : License activation through proxy server uses IP address in proxy CONNECT, not nameserver

Component: TMOS

Symptoms:
License activation http/https request has the license server IP address instead of license server domain name.

Conditions:
When the proxy server and proxy port are configured and delete default management route.

Impact:
This causes your proxy server to disallow the connection

Workaround:
None.


944173-1 : SSL monitor stuck does not change TLS version

Component: Local Traffic Manager

Symptoms:
The SSL monitor remains in the current TLS version and does not switch to another version when a server changes.

Conditions:
-- SSL monitor configured.
-- Server configuration changes from TLSv1.2 to TLSv1.

Impact:
Pool members marked down.

Workaround:
Use the In-TMM monitor.


944121-5 : Missing SNI information when using non-default domain https monitor running in tmm mode

Component: In-tmm monitors

Symptoms:
In-tmm https monitors do not send the SNI (Server Name Indication) information for non-default route domain pool members.

Conditions:
-- SNI is configured in serverssl profile a
-- serverssl profile is assigned to in-tmm https monitors
-- https monitors are monitoring pool members that are in a non-default route domain.

Impact:
The TLS connection might fail.

Workaround:
None


944093-1 : Maximum remaining session's time on user's webtop can flip/flop

Component: Access Policy Manager

Symptoms:
When an Access Policy is configured with Maximum Session Timeout, the rendered value of maximum remaining session's time can flip/flop in seconds on a user's webtop

Conditions:
Access Policy is configured with Maximum Session Timeout >= 60000 secs

Impact:
End users will see the remaining time being continually reset.


943669-2 : B4450 blade reboot

Component: TMOS

Symptoms:
In a rare scenario, a B4450 blade suddenly reboots.

Conditions:
This occurs when there is heavy traffic load on VIPRION B4450 blades. The root cause is unknown. It happens extremely rarely.

Impact:
Traffic disrupted while the blade reboots.

Workaround:
None.


943641-2 : IKEv1 IPsec in interface-mode may fail to establish after ike-peer reconfiguration

Component: TMOS

Symptoms:
After changing an element of the ike-peer configuration, such as the pre-shared secret, the related IPsec interface mode tunnel can no longer forward packets into the tunnel.

Conditions:
-- IKEv1.
-- IPsec policy in interface mode.
-- Configuration change or a new configuration.

Impact:
When the problem is exhibited on a BIG-IP Initiator, ISAKMP negotiation fails to start when interesting traffic arrives. No messages are written to /var/log/racoon.log.

When the problem is exhibited on a BIG-IP Responder, the IPsec tunnel successfully establishes, but the BIG-IP fails to forward any interesting traffic into the established tunnel. No useful log messages are seen.

Note: 'Interesting traffic' is packets that match a traffic-selector.

Workaround:
Run 'bigstart restart tmm' or reboot.


943597-1 : 'Upper Bound' and 'Lower Bound' thresholds are not displayed in Connections line chart

Component: TMOS

Symptoms:
On the dashboard, the line chart of 'Throughput', 'CPU Usage', and 'Memory Usage' can show the line of thresholds that indicates 'Upper Bound' and 'Lower Bound', but there is no line of thresholds on the line chart of 'Connections'.

Conditions:
Create a custom line chart for 'Connections' that includes 'Upper Bound' and 'Lower Bound'.

Impact:
Line Chart of 'Connections' does not display 'Upper Bound' and 'Lower Bound' thresholds.

Workaround:
None.


943577-1 : Full sync failure for traffic-matching-criteria with port list under certain conditions

Component: TMOS

Symptoms:
Performing a full configuration sync with traffic-matching-criteria (TMC) under specific conditions fails with errors similar to:

err mcpd[6489]: 01070710:3: Database error (13), Cannot update_indexes/checkpoint DB object, class:traffic_matching_criteria_port_update status:13 - EdbCfgObj.cpp, line 127.
err mcpd[6489]: 01071488:3: Remote transaction for device group /Common/Failover to commit id 245 6869100131892804717 /Common/tmc-sync-2-bigip1.test 0 failed with error 01070710:3: Database error (13), Cannot update_indexes/checkpoint DB object, class:traffic_matching_criteria_port_update status:13 - EdbCfgObj.cpp, line 127..

Conditions:
This may occur on a full-load config sync (not an incremental sync)
On the device receiving the ConfigSync:
   - a traffic-matching-criteria is attached to a virtual server
   - the traffic-matching-criteria is using a port-list
On the device sourcing the ConfigSync:
   - the same traffic-matching-criteria is attached to the same virtual server
   - the original port-list is modified (e.g. a description is changed)
   - the TMC is changed to reference a _different_ port-list

Impact:
Unable to sync configurations.

Workaround:
Copy the "net port-list" and "ltm traffic-matching-criteria" objects from the source to target system, merge them with "tmsh load sys config merge", and then perform a force-full-load-push sync from source to target.

If the BIG-IP systems are using device groups with auto-sync enabled, disable auto-sync temporarily while performing this workaround.

1. On the source system (the system whose configuration you want to sync to peer), save the configuration and extract the ltm traffic-matching-criteria and port-lists:

tmsh save sys config

(shopt -s nullglob; echo "#"; echo "# $HOSTNAME"; echo "# generated $(date +"%F %T %z")"
    cat /config{/partitions/*,}/bigip{_base,}.conf |
    awk '
        BEGIN { p=0 }
        /^(ltm traffic-matching-criteria|net port-list) / { p=1 }
        /^}/ { if (p) { p=0; print } }
        { if (p) print; }
    ' ) > /var/tmp/portlists-and-tmcs.txt

2. Copy /var/tmp/portlists-and-tmcs.txt to the target system

3. On the target system, load that file:

    tmsh load sys config replace file /var/tmp/portlists-and-tmcs.txt

3a. If loading the config file on the target system fails with the same error message seen during a ConfigSync, follow the procedure in
K13030: Forcing the mcpd process to reload the BIG-IP configuration :: https://support.f5.com/csp/article/K13030.

   tmsh save sys config
   clsh touch /service/mcpd/forceload
   clsh reboot

4. On the source system, force a full-load sync to the device-group:

    tmsh run cm config-sync force-full-load-push to-group <name of sync-group>


943473-1 : LDAP monitor's test functionality has an incorrect and non-modifiable IP address field in GUI

Component: TMOS

Symptoms:
While trying to use the monitor test page in the GUI for an LDAP monitor, the destination address field contains the value *.*(asterisk-dot-asterisk), and it is not editable.

Conditions:
-- Create an LDAP monitor.
-- Go to the Test page.

Impact:
You are unable to modify the test destination address for the LDAP monitor.

Workaround:
Use TMSH.

-- To run the test:
tmsh run /ltm monitor ldap <LDAP-Monitor-Name> destination <IP-Address>

Example: tmsh run /ltm monitor ldap myldap destination 10.10.10.10:389

-- To check test results:
tmsh show /ltm monitor ldap <LDAP-Monitor-Name> test-result
tmsh show /ltm monitor ldap myldap test-result


943441-1 : Issues in verification of Bot Defense with F5 Anti-Bot Mobile SDK

Component: Application Security Manager

Symptoms:
Verification may be incomplete when using the F5 Anti-Bot Mobile SDK with the Bot Defense profile.

Conditions:
-- Using the Bot Defense profile together with the F5 Anti-Bot Mobile SDK.
-- Enabling the Mobile Applications section in the profile.

Impact:
Mobile application verification may be incomplete.

Workaround:
None


943109-1 : Mcpd crash when bulk deleting Bot Defense profiles

Component: TMOS

Symptoms:
When bulk deleting a large number of Bot Defense profiles (around 450 profiles) using TMSH, mcpd could crash.

Conditions:
This can be encountered during bulk delete of Bot Defenese profiles via tmsh.

Impact:
Crash of mcpd causing failover.

Workaround:
Delete the Bot Defense profiles in smaller batches to avoid the possible crash.


943045-3 : Inconsistency in node object name and node IPv6 address when IPv6 pool-member is created without providing node object name.

Component: TMOS

Symptoms:
When using Ansible to create a pool that contains an IPv6 pool member, you get an error:

0107003a:3: Pool member node and existing node cannot use the same IP Address.

Conditions:
-- Creating a new pool via Ansible.
-- A new IPv6 pool member is used.
-- The IPv6 pool member's name is not included.

Impact:
Pool creation fails.

Workaround:
If you are unable to specify the pool member name, you can use other available configuration tools like tmsh, the GUI, or AS3.


943033-1 : APM PRP LDAP Group Lookup agent has a syntax error in built in VPE expression

Component: Access Policy Manager

Symptoms:
PRP LDAP Group Lookup agent, the expression incorrectly places the 'string tolower' outside the square brackets. This causes an issue in the GUI of the LDAP Group Lookup object where the 'Simple' branch rules do not show up. You see this 'Warning':

Warning, this expression was made manually and couldn't be parsed, please use advanced tab.

Conditions:
Configure PRP with the LDAP Group Lookup agent in the Visual Policy Editor (VPE).

Impact:
Tcl expression containing a syntax error prevents the LDAP Group Lookup agent from functioning properly.

Workaround:
Go to the LDAP Group Lookup agent advanced tab and change this:
expr {[string tolower [mcget {session.ldap.last.attr.memberOf}]] contains string tolower["CN=MY_GROUP, CN=USERS, CN=MY_DOMAIN"]}

To this:
expr {[string tolower [mcget {session.ldap.last.attr.memberOf}]] contains [string tolower "CN=MY_GROUP, CN=USERS, CN=MY_DOMAIN"]}

Click finish.

Now you can click 'change', and use the 'Simple' tab and the 'Add an expression using presets' option.


942793-2 : BIG-IP system cannot accept STARTTLS command with trailing white space

Component: Local Traffic Manager

Symptoms:
When an SMTPS profile is applied on a virtual server and the SMTP client sends a STARTTLS command containing trailing white space, the BIG-IP system replies with '501 Syntax error'. The command is then forwarded to the pool member, which can result in multiple error messages being sent to the SMTP client.

Conditions:
-- A virtual server is configured with an SMTPS profile.
-- The SMTP client sends a STARTTLS command with trailing spaces.

Impact:
The SMTP client is unable to connect to the SMTP server.

Workaround:
Use an SMTP client that does not send a command containing trailing white space.


942729-1 : Export of big Access Policy config from GUI can fail

Component: Access Policy Manager

Symptoms:
Export of Access Policy times out after five minutes and fails via the GUI

Conditions:
Exact conditions are unknown, but it occurs while handling a large access policy.

Impact:
Unable to redeploy configuration

Workaround:
Use thge cli to export the access policy:

K30575107: Overview of the ng_export, ng_import and ng_profile commands
https://support.f5.com/csp/article/K30575107


942665-1 : Rate limit and threshold configuration checks are inconsistent when applied to Basic DoS Vectors and Bad Actors DoS vectors

Component: Advanced Firewall Manager

Symptoms:
Inconsistent configuration checks may result in configuration not being applied correctly.

Conditions:
DoS vectors configured on the BIG-IP

Impact:
Configuration changes may not be accepted by the BIG-IP.


942549-1 : Dataplane INOPERABLE - Only 7 HSBs found. Expected 8

Component: TMOS

Symptoms:
During boot of a i15xxx system you see the message:

Dataplane INOPERABLE - Only 7 HSBs found. Expected 8

Conditions:
There are no specific conditions that cause the failure.
This can occur on any i15xxx device, although some devices exhibit the failure consistently around 50% of boots and others never exhibit the issue.

Impact:
When this failure occurs in a system, the system is inoperable.

Workaround:
There is no workaround for systems that do not have software capable of resetting the hardware device during the HSB load process.


942521-6 : Certificate Managers are unable to move certificates to BIG-IP via REST

Component: Device Management

Symptoms:
You cannot upload a cert/key via the REST API if you are using a certificate manager account

Conditions:
-- Using the REST API to upload a certificate and/or key
-- User is logged in as a Certificate Manager

Impact:
Unable to upload certificates as Certificate Manager

Workaround:
Use admin account instead of using Certificate Manager account to upload certs and keys


942489-2 : TCP proxy with ramcache and OneConnect can result in out-of-order events which stalls the flow

Component: Local Traffic Manager

Symptoms:
Due to the client resending the request, the connection is not lost but is stalled for a considerable time.

Conditions:
-- virtual server running 16.0.0 with compression, caching, and OneConnect enabled.
-- The request has 'Accept-Encoding: gzip ...; header
-- The response has 'Cache-Control: no-cache' header.
-- The response payload is equal to or greater than 1024 bytes (otherwise the default compression profile does not consider it).

Impact:
This causes slow response times for application users.

Workaround:
Unconfigure any of the following profiles:
-- OneConnect
-- HTTP compression
-- Caching


942217-4 : Virtual server keeps rejecting connections for rstcause 'VIP down' even though virtual status is 'available'

Component: Local Traffic Manager

Symptoms:
With certain configurations, virtual server keeps rejecting connections for rstcause 'VIP down' after 'trigger' events.

Conditions:
Required Configuration:

-- On the virtual server, the service-down-immediate-action is set to 'reset' or 'drop'.

-- The pool member has rate-limit enabled.

Required Conditions:

-- Monitor flap, or adding/removing monitor or configuration change made with service-down-immediate-action.

-- At that time, one of the above events occur, the pool member's rate-limit is active.

Impact:
Virtual server keeps rejecting connections.

Workaround:
Delete one of the conditions.

Note: The affected virtual server may automatically recover upon the subsequent monitor flap, etc., if no rate-limit is activated at that time.


942185-1 : Non-mirrored persistence records may accumulate over time

Component: Local Traffic Manager

Symptoms:
Persistence records accumulate over time due to expiration process not reliably taking effect. The 'persist' memory type grows over time.

Conditions:
-- Non-cookie, non-mirrored persistence configured.
-- No high availability (HA) configured or HA connection permanently down.
-- Traffic that activates persistence is occurring.

Impact:
Memory pressure eventually impacts servicing of traffic in a variety of ways. Aggressive sweeper runs and terminates active connections. TMM may restart. Traffic disrupted while tmm restarts.

Workaround:
None


941961-1 : Upgrading system using WAM TCP profiles may prevent the configuration from loading

Component: WebAccelerator

Symptoms:
If a BIG-IP is on version 13.1.0 through 15.1.x and has profiles in use that use wam-tcp-wan-optimized and/or wam-tcp-lan-optimized as parent profiles, then when the configuration is upgraded to 16.0.0, the configuration fails to load, with an error similar to:

err mcpd[10087]: 01020036:3: The requested parent profile (/Common/wam-tcp-wan-optimized) was not found.

Conditions:
-- Upgrading from version 13.1.0 through 15.1.x.
-- Using profiles derived from wam-tcp-wan-optimized and/or wam-tcp-lan-optimized.

Impact:
Configuration does not load.

Workaround:
Remove these profiles and adjust the configuration elements that use them accordingly.

Here are two examples:

-- Copy the definition of 'wam-tcp-wan-optimized' from /defaults/wam_base.conf into /config/bigip.conf, and then reload the configuration.

-- Change the references to wam-tcp-wan-optimized to something else in your config file (e.g., tcp-wan-optimized), and then reload the configuration.


941929-3 : Google Analytics shows incorrect stats, when Google link is redirected.

Component: Application Security Manager

Symptoms:
When server respond with a redirect, ASM challenge makes Google Analytics stats appear as if they are 'Direct' instead of 'Organic'.

Conditions:
-- Google link is responded to (by the server) with a redirect.

-- Bot defense profile or DoS Application profile attached to a virtual server with challenge mitigation enabled.

Impact:
Incorrect data is displayed in the Google Analytics dashboard.

Workaround:
None


941893-4 : VE performance tests in Azure causes loss of connectivity to objects in configuration

Component: TMOS

Symptoms:
When performance tests are run on BIG-IP Virtual Edition (VE) in Microsoft Azure, the BIG-IP system loses all connectivity to the pools, virtual servers, and management address. It remains unresponsive until it is rebooted from the Azure console.

Conditions:
Running performance tests of VE in Azure.

Impact:
The GUI becomes unresponsive during performance testing. VE is unusable and must be rebooted from the Azure console.

Workaround:
Reboot from the Azure console to restore functionality.


941773-2 : Video resolution mis-prediction

Component: Traffic Classification Engine

Symptoms:
Certain video traffic is not getting classified with high accuracy.

Conditions:
- Behavioral classifier for Classification Engine is enabled

Impact:
- Mis-predictions can lead to higher definition videos being categorized as low-definition videos and vice versa.


941765-2 : Video resolution mis-predictions

Component: Traffic Classification Engine

Symptoms:
BIG-IP's traffic playback resolution prediction is calculated on all individual connections of a client's video stream.

Conditions:
- Video streaming client downloads through BIG-IP
- Video is downloaded using multiple connections.

Impact:
- Mis-prediction in the video resolution.


941625-2 : BD sometimes prints errors related to TS cookie building

Component: Application Security Manager

Symptoms:
BD sometimes print errors related to TS cookie building when receiving ASM cookies with account_id:

-- BEM|ERR |May 19 17:49:55.800|0983|response_header_accumulator.c:0200|Error: CookieMgrBuildCookie failed. ans 1 job 2957561040.

-- IO_PLUGIN|ERR |May 19 17:49:55.800|0983|io_plugin.c:3320|TMEVT_RESPONSE: Cannot build a ts cookie.

Conditions:
-- Cookie protection is enabled.
-- The BIG-IP software is upgraded from a version that was earlier than 15.1.x.

Impact:
The cookie is not built and an error is logged.

Workaround:
None.


941481-1 : iRules LX - nodejs processes consuming more memory on vCMP guest secondary slot

Component: Local Traffic Manager

Symptoms:
Certain long-running iRule LX nodejs processes consume considerably more memory on the secondary blade than on the primary blade of the same cluster. The problem is present only on the Standby BIG-IP. On the Active the restjavad processes consume the same amount of memory on the primary and on the secondary slot.

Conditions:
-- VIPRION with multiple blades and vCMP configured
-- iRulesLX in use

Impact:
Higher memory consumption on the secondary blades, but the memory consumption does not increase, so the impact to system performance is negligible.


941381-4 : MCP restarts when deleting an application service with a traffic-matching-criteria

Component: TMOS

Symptoms:
After deleting an application service that contains a virtual server and a traffic-matching-criteria, the mcpd daemon crashes.

Conditions:
-- BIG-IP application service configuration containing a virtual server with traffic-matching-criteria
-- Application service is deleted

Impact:
Traffic and control plane disrupted while mcpd restarts.

Workaround:
None.


941257-4 : Occasional Nitrox3 ZIP engine hang

Component: Local Traffic Manager

Symptoms:
Occasionally the Nitrox3 ZIP engine hangs.

In /var/log/ltm:
 
crit tmm[12404]: 01010025:2: Device error: n3-compress0 Nitrox 3, Hang Detected: compression device was reset (pci 02:00.1, discarded 1).
crit tmm[12404]: 01010025:2: Device error: n3-compress0 Zip engine ctx eviction (comp_code=0): ctx dropped.

Conditions:
BIG-IP appliance that uses the Nitrox 3 hardware compression chip: 5xxx, 7xxx, 12250 and B2250.

You can check if your platform has the nitrox3 by running the following command:

tmctl -w 200 compress -s provider

provider
--------
bzip2
lzo
nitrox3 <--------
zlib

Impact:
The Nitrox3 hardware compression system becomes unavailable and the compression mode switches to software compression. This can lead to high CPU usage.

Workaround:
Disable http compression


941169-5 : Subscriber Management is not working properly with IPv6 prefix flows.

Component: Policy Enforcement Manager

Symptoms:
Flows for a PEM subscriber are not deleted from the system even after the subscriber is deleted.

Conditions:
When IPv6 prefix flows are configured on PEM (i.e., sys db variable tmm.pem.session.ipv6.prefix.len is configured with a value other than 128).

Impact:
Flows for a PEM subscriber are not deleted from the system even after the subscriber is deleted. Resources are not released from the system.

Workaround:
None.


940885-1 : Add support for Mellanox CX5 Ex adapter

Component: TMOS

Symptoms:
The Mellanox CX5 Ex adapter is not supported by the BIG-IP.

Conditions:
A BIG-IP Virtual Edition system configured to use one or more Mellanox CX5 Ex adapters.

Impact:
Systems using a CX5 Ex adapter will have to use the sock driver rather than the Mellanox driver.


940837-3 : The iRule command node is not triggered in CLIENT_ACCEPTED with HTTP/2.

Component: Local Traffic Manager

Symptoms:
The node iRule command causes the specified server node to be used directly, thus bypassing any load-balancing. However, with HTTP/2, the node command may fail to execute within the CLIENT_ACCEPTED event. This results in no traffic being sent to configured node.

Conditions:
-- A node command is used under CLIENT_ACCEPTED event.
-- An HTTP/2 profile applied to virtual server.
-- The HTTP/2 protocol in use.

Impact:
With HTTP/2 configured, the iRule node command fails to execute within the CLIENT_ACCEPTED event, causing no traffic to be sent to the desired node.

Workaround:
As a workaround, you may use HTTP_REQUEST event instead of CLIENT_ACCEPTED in iRule syntax.


940733-4 : Downgrading a FIPS-enabled BIG-IP system results in a system halt

Component: Global Traffic Manager (DNS)

Symptoms:
After upgrading a FIPS-enabled BIG-IP system, booting to a partition running an earlier software version, which results in a libcrypto validation error and system halt.

Conditions:
-- FIPS-licensed BIG-IP system.
-- Upgrade.
-- Boot into an partition running an earlier version of the software.

Impact:
System boots to a halted state.

Workaround:
Before booting to the partition with the earlier version, delete /shared/bin/big3d.

Note: This issue might have ramifications for DNS/GTM support. DNS/GTM is not FIPS certified.


940665-2 : DTLS 1.0 support for PFS ciphers

Component: Local Traffic Manager

Symptoms:
When using DTLS 1.0 the following two PFS ciphers are no longer negotiated and they cannot be used in a DTLS handshake/connection.

* ECDHE-RSA-AES128-CBC-SHA
* ECDHE-RSA-AES256-CBC-SHA

Conditions:
DTLS 1.0 is configured in an SSL profile.

Impact:
ECDHE-RSA-AES128-CBC-SHA and ECDHE-RSA-AES256-CBC-SHA are unavailable.


940469-1 : Unsupported option in /etc/resolv.conf causes failure to sync DNS Zone configuration

Component: Global Traffic Manager (DNS)

Symptoms:
The 'gtm_add' script fail to sync configuration information from the peer when 'options inet6' is present in /etc/resolv.conf.

Conditions:
The option 'options inet6' is used in /etc/resolv.conf.

Impact:
The 'gtm_add' script removes the current config and attempts to copy over the config from the remote GTM. When the remote copy fails, the local device is left without any config.

Workaround:
Remove the 'options inet6' from /etc/resolv.conf.


940177-2 : Certificate instances tab shows incorrect number of instances in certain conditions

Component: TMOS

Symptoms:
The SSL Certificate instances tab shows an incorrect number of instances when the Cert name and the Key name match. This does not occur when the cert and key are different names.

Conditions:
-- SSL certificate and key names match
-- Viewing the SSL certificate list in the GUI

Impact:
All the custom profiles will be listed when only select instances for ca-bundle cert are expected


939961-1 : TCP connection is closed when necessary after HTTP::respond iRule.

Component: Local Traffic Manager

Symptoms:
After HTTP::respond iRule, when "Connection: close" header is sent to the client, TCP connection is not closed.

Conditions:
- TCP profile is used.
- HTTP profile is used.
- HTTP::respond iRule is used (via HTTP_RESPONSE).
- HTTP sends "Connection: close" header.

Impact:
TCP connection lives longer than needed.

Workaround:
N/A


939757-5 : Deleting a virtual server might not trigger route-injection update.

Component: TMOS

Symptoms:
When using multiple virtual-servers sharing the same destination address (virtual-address), deleting a single virtual-server that contributes to a virtual-address status might not trigger a route-injection update.

Conditions:
-- Multiple virtual-servers sharing the same destination address.
-- Virtual-server is deleted.

Impact:
Route remains in a routing table and/or Route is not removed from a routing table.

Workaround:
Disable and re-enable the virtual-address after deleting a virtual-server.


939517-5 : DB variable scheduler.minsleepduration.ltm changes to default value after reboot

Component: TMOS

Symptoms:
Running the command 'tmsh list /sys db scheduler.minsleepduration.ltm'
shows that the value is -1.

The db variable 'scheduler.minsleepduration.ltm' is set to -1 on mcpd startup.

This overwrites a custom value.

Conditions:
-- The db variable 'scheduler.minsleepduration.ltm' has a non-default value set.
-- A reboot occurs.

Impact:
The db variable 'scheduler.minsleepduration.ltm' reverts to the default value. When the db variable reverts to the default value of unset -1, tmm uses more CPU cycles when idle.

Workaround:
None


939249-2 : iSeries LCD changes to secure mode after multiple reboots

Component: TMOS

Symptoms:
After repeatedly rebooting an iSeries platform, the LCD can become erroneously set to secure mode on its own, and you are unable to use the menus on the LCD.

Conditions:
-- Repeated reboots of the device.
-- The db lcd.showmenu value initially set to enable are required.
-- Other required conditions are not fully known.

Impact:
-- LCD becomes set to secure mode.
-- The bigdb variable lcd.showmenu is changed to 'disable'.

Workaround:
Run the commands:
tmsh modify sys db lcd.showmenu value disable
tmsh modify sys db lcd.showmenu value enable

This clears the secure mode of the LCD.


938545-2 : Oversize plugin Tcl object results can result in 0-length messages and plugin crash

Component: Local Traffic Manager

Symptoms:
Bd crashes.

Conditions:
-- ASM enabled.
-- iRule used.
-- Command arguments are greater than maximum MPI message size.

Impact:
ASM traffic disrupted while bd restarts.

Workaround:
None.


938309-1 : In-TMM Monitors time out unexpectedly

Component: Local Traffic Manager

Symptoms:
When using the in-TMM monitoring feature, monitored targets (nodes/pool members) may be marked DOWN unexpectedly if there is a delay in responding to ping attempts.
Specifically, if the ping response from the target is delayed by more than the 'interval' value configured for the monitor, but less than the 'timeout' value configured for the monitor, the target may be marked DOWN.

Conditions:
This may occur when either:
-- In-TMM monitoring is enabled (sys db bigd.tmm = enable) and the monitor type uses in-TMM monitoring; OR
-- Bigd is configured to NOT reuse the same socket across consecutive ping attempts (sys db bigd.reusesocket = disable)
AND:
-- The monitored target does not respond to ping attempts within the 'interval' value configured for the monitor.

Impact:
The monitored target may be marked DOWN if it does not respond to ping attempts within the 'interval' value configured for the monitor, instead of within the 'timeout' value configured for the monitor.

Workaround:
To work around this issue, use one of the following methods:
-- Disable in-TMM monitoring and enable bigd socket reuse (sys db bigd.tmm = disable, and sys db bigd.reusesocket = enable).
-- Configure the monitor with an 'interval' value longer than the expected response time for the monitored target(s).


938293-1 : importing a JSON policy with Application Language "auto-detect" changes to 'utf8' policy

Component: Application Security Manager

Symptoms:
When importing a JSON policy with Application Language "auto-detect", the policy wrongly gets set as "utf-8".

Conditions:
1. Create a policy with Application Language "auto-detect".
2. Export it as a JSON policy (Verify the policy contains: "applicationLanguage" : "auto-detect".)
3. Import it back

Application language changed to utf-8

Impact:
Application language is set to utf-8 instead of auto-detect


938145-2 : DAG redirects packets to non-existent tmm

Component: TMOS

Symptoms:
-- Connections to self-IP addresses may fail.
-- SYNs packets arrive but are never directed to the Linux host.

Conditions:
-- Provision as vCMP dedicated host.
-- Create a self-IP address with appropriate allow-service.

Impact:
Repeated attempts to connect to the self-IP (e.g., via ssh) fail.

Workaround:
None


937769-1 : SSL connection mirroring failure on standy with sslv2 records

Component: Local Traffic Manager

Symptoms:
Standby device in ssl connection mirroring config does not handle sslv2 recrods correctly.

Conditions:
SSLv2 records processed by standby high availability (HA) device.

Impact:
Standby device fails handshake, active will finish handshake resulting in non mirrored connection.


937749-1 : The 'total port blocks' value for NAT stats is limited to 64 bits of range

Component: Advanced Firewall Manager

Symptoms:
The 'total port blocks' value, which can be found in PBA 'tmctl' tables, 'tmsh show', and SNMP, is limited to 64 bits of range. The upper 64 bits of the value are not taken into account.

Conditions:
This always occurs, but affects only systems whose configuration makes the 'total port blocks' value exceed 64 bits of range.

Impact:
Incorrect statistics.

Workaround:
None.

Note: For those who really need this value, it is still possible to manually calculate it, but that is not a true workaround.


937649-1 : Flow fwd broken with statemirror.verify enabled and source-port preserve strict

Component: Local Traffic Manager

Symptoms:
Flow forwarding does not work with statemirror.verify enabled and source-port is preserve strict. Depending on the number of tmms and the IP addresses/ports on the network, this causes return traffic to get dropped.

Traffic captures show packets leaving the BIG-IP system on one tmm and being returned on another. The return traffic that encounters the second tmm is dropped.

Conditions:
-- Mirroring is enabled.
-- High availability (HA) peer is connected.
-- The source-port setting is preserve-strict.
-- The statemirror.verify option is enabled.
-- There is more than one tmm.

Impact:
Server-side return traffic to the BIG-IP is dropped. This causes connection timeouts and resets.

Workaround:
-- Disable statemirror.verify, disable source-port preserve-strict, disable mirroring.

-- On BIG-IP Virtual Edition (VE), add the following to tmm_init.tcl on both units and restart tmm:
 ndal ignore_hw_dag yes


937573-2 : Connections drop in virtual server with Immediate Action On Service Down set to Drop

Component: Local Traffic Manager

Symptoms:
In a virtual server configured with Immediate Action On Service Down set to Drop and an iRule to pick a pool different from the one attached to the virtual server, if the default pool is attached in an offline state, connections are always dropped even when the default pool becomes available later.

Conditions:
- Virtual server configured with Immediate Action On Service Down set to Drop.
- An iRule selects a different pool from the one attached to the virtual server.

Impact:
Connections are silently dropped.

Workaround:
Change "Immediate Action On Service Down" setting in the virtual server to None.


937541-1 : Wrong display of signature references in violation details

Component: Application Security Manager

Symptoms:
The number '1' is added to the signature reference in violation details in the Request Log.

Conditions:
You click the '?' icon near signature name to view signature details and there are references for this signature

Impact:
The number 1 is shown before the link


937481-3 : Tomcat restarts with error java.lang.OutOfMemoryError

Component: TMOS

Symptoms:
In the GUI, while trying to list a large configuration, tomcat restarts with error java.lang.OutOfMemoryError: Java heap space due to a large read operation.

Conditions:
-- From the GUI, navigate to Local Traffic :: Pools :: Pool List.
-- The configuration contains approximately 10,000 objects (objects include pools, nodes, virtual servers, etc.).

Impact:
When the system attempts to list the large configuration, tomcat restarts, resulting in 503 error.

Workaround:
Use the provision.tomcat.extramb database variable to increase the maximum amount of Java virtual memory available to the tomcat process.

Impact of workaround: Allocating additional memory to Apache Tomcat may impact the performance and stability of the BIG-IP system. You should perform this procedure only when directed by F5 Technical Support after considering the impact to Linux host memory resources.

-- Using a utility such as free or top, determine if you have enough free memory available to use this procedure.

For example, the following output from the free utility shows 686844 kilobytes available:
total used free shared buffers cachedMem:
16472868 15786024 686844 807340 827748 2543836
-/+ buffers/cache: 12414440 4058428
Swap: 1023996 0 1023996

-- View the current amount of memory allocated to the tomcat process by typing one of the following commands:
ps | grep " -client" | egrep -o Xmx'[0-9]{1,5}m'

The command output appears similar to the following example:

Xmx260m
Xmx260m

-- View the current value of the provision.tomcat.extramb database variable by typing the following command
tmsh list /sys db provision.tomcat.extramb

-- Set the provision.tomcat.extramb database variable to the desired amount of additional memory to be allocated using the following command syntax:
modify /sys db provision.tomcat.extramb value <MB>

-- If the device is part of a high availability (HA) configuration, the provision.tomcat.extramb database value should be synchronized to the peer devices from the command line. To run the ConfigSync process, use the following command syntax:
tmsh run /cm config-sync <sync_direction> <sync_group>

For example, the following command pushes the local device's configuration to remote devices in the Syncfailover device group:

tmsh run /cm config-sync to-group Syncfailover

-- Restart the tomcat process by typing the following command:
restart /sys service tomcat


936777-1 : Old local config is synced to other devices in the sync group.

Component: Global Traffic Manager (DNS)

Symptoms:
Newly added DNS/GTM device may sync old local config to other devices in the sync group.

Conditions:
Newly added DNS/GTM device has a more recent change than other devices in the sync group.

Impact:
Config on other DNS/GTM devices in the sync group are lost.

Workaround:
You can use either of the following workarounds:

-- Make a small DNS/GTM configuration change before adding new devices to the sync group.

-- Make a small DNS/GTM configuration change on the newly added device to re-sync the correct config to other DNS/GTM devices.


936557-1 : Retransmissions of the initial SYN segment on the BIG-IP system's server-side incorrectly use a non-zero acknowledgement number when Verified Accept is enabled.

Component: Local Traffic Manager

Symptoms:
As the BIG-IP system attempts to open a TCP connection to a server-side object (e.g., a pool member), retransmissions of the initial SYN segment incorrectly use a non-zero acknowledgement number.

Conditions:
This issue occurs when the following conditions are true:

-- Standard TCP virtual server.

-- TCP profile with Verified Accept enabled.

-- Receipt of the client's ACK (as part of the client-side TCP 3-way handshake) is delayed. Due to Verified Accept being enabled, this delay causes the BIG-IP system to retransmit its SYN to the server until the client's ACK is received.

Impact:
Depending on the specific server implementation, or the security devices present on the BIG-IP system's server-side before the server, a SYN containing a non-zero acknowledgement number may be rejected. In turn, this may cause connections to fail to establish.

Workaround:
If compatible with your application and specific needs, you can work around this issue by disabling Verified Accept in the TCP profile.


936441-1 : Nitrox5 SDK driver logging messages

Component: Local Traffic Manager

Symptoms:
The system kernel started spontaneously logging messages at an extremely high rate (~3000 per second):

Warning kernel: EMU(3)_INT: 0x0000000000000020
warning kernel: sum_sbe: 0
warning kernel: sum_dbe: 0
warning kernel: sum_wd: 0
warning kernel: sum_gi: 0
warning kernel: sum_ge: 0
warning kernel: sum_uc: 1

The above set of messages seems to be logged at about 2900-3000 times a second.

These messages continue after TMM fails its heartbeat and is killed. The system is rebooted by the host watchdog.

Conditions:
These messages are triggered by Nitrox5 driver when EMU microcode cache errors corrected by hardware.

Impact:
High rate of logging messages. The tmm heartbeat eventually fails, and tmm is restarted. Traffic disrupted while tmm restarts.

Workaround:
None.


936417-4 : DNS/GTM daemon big3d does not accept ECDH or DH ciphers

Component: Global Traffic Manager (DNS)

Symptoms:
The DNS/GTM big3d daemon does not accept ECDH or DH ciphers.

Conditions:
Connections to big3d with ECDH or DH ciphers.

Impact:
ECDH/DH ciphers do not work with big3d.

Workaround:
Do not use ECDH/DH ciphers.


936361-2 : IPv6-based bind (named) views do not work

Component: Global Traffic Manager (DNS)

Symptoms:
Bind does not match IPv6 addresses configured for a zone view, and returns REFUSED responses, rather than the
expected answers.

After enabling debug logging in bind (see K14680), the apparent source address of the IPv6 DNS requests shows as being in the fe80::/96 range, rather than the IPv6 source address that sent the request.

For example:

debug 1: client @0x579bf188 fe80::201:23ff:fe45:6701%10#4299: no matching view in class 'IN'

Conditions:
- BIG-IP DNS is provsioned
- One or more ZoneRunner views is defined using IPv6 addresses.
- A DNS query is sent from an IPv6 source address

Impact:
You cannot use DNS views in bind (zonerunner) based on IPv6 addresses.

Workaround:
If possible, use only IPv4 addresses to define views for DNS queries


936093-1 : Non-empty fipserr files loaded from a UCS archive can cause a FIPS BIG-IP platform to remain offline

Component: TMOS

Symptoms:
Loading a UCS file with non-empty fipserr files can cause a FIPS-based system to remain offline.

Conditions:
-- Using a BIG-IP with a Platform FIPS license.
-- Loading a UCS file with a non-empty fipserr file.

Impact:
System is completely offline with spurious 'fipserr' failures, even after loading the UCS file.

Workaround:
Before creating a UCS archive, truncate the following files so they have zero size:

/config/f5_public/fipserr
/var/named/config/f5_public/fipserr
/var/dnscached/config/f5_public/fipserr

This can be accomplished using a command such as:

truncate -c -s0 /config/f5_public/fipserr /var/named/config/f5_public/fipserr /var/dnscached/config/f5_public/fipserr


935945-2 : GTM HTTP/HTTPS monitors cannot be modified via GUI

Component: Global Traffic Manager (DNS)

Symptoms:
GUI reports an error when modifying DNS/GTM HTTP/HTTPS monitors:

01020036:3: The requested monitor parameter (/Common/http-default 2 RECV_STATUS_CODE=) was not found.

Conditions:
RECV_STATUS_CODE has never been set for the DNS/GTM HTTP/HTTPS monitors.

Impact:
Not able to make changes to DNS/GTM HTTP/HTTPS monitors through GUI.

Workaround:
If 'recv-status-code' has never been set, use tmsh instead.

Note: You can set 'recv-status-code' using tmsh, for example:

   tmsh modify gtm monitor http http-default recv-status-code 200


935865-6 : Rules that share the same name return invalid JSON via REST API

Component: Advanced Firewall Manager

Symptoms:
When retrieving rule stats on a firewall policy, if two rules that share the same name but one of which is directly attached to the policy while the other is attached via a rule list, then a invalid JSON is returned. The JSON has identical keys for each entry associated with the rule. This is an invalid JSON structure that cannot be parsed correctly (Or data for one of the rules is lost)

Conditions:
A firewall policy that has one of rule directly attached to the policy while the other is attached via a rule list, and both rules share the same name.

Impact:
Invalid JSON structure returned for stat REST API call

Workaround:
Ensure that no rule shares its name with another rule.


935825-1 : Cannot update_indexes/checkpoint DB object

Component: Protocol Inspection

Symptoms:
Creation of a security protocol-inspection profile via the CLI fails with an unclear error:

01070710:3: Cannot update_indexes/checkpoint DB object, class:ips_port_service_profile status:13 - EdbCfgObj.cpp, line 127

Conditions:
Create a security protocol-inspection profile on a BIG_IP without a "port".

Impact:
Unclear error on the TMSH that does not provide detail on the exact root cause of the failure.


935793-1 : With mirroring enabled on a SIP virtual server, connections on the standby are reset with MBLB internal error (Routing problem)

Component: Local Traffic Manager

Symptoms:
When a virtual server with a SIP profile has mirroring enabled, connections on the standby unit will be removed shortly after being created. If tm.rstcause.log is enabled the reset cause message appears similar to the following:

-- err tmm1[18383]: 01230140:3: RST sent from 10.2.207.208:5080 to 10.2.207.201:31597, [0x2c1c820:1673] MBLB internal error (Routing problem).
-- err tmm1[18383]: 01230140:3: RST sent from 10.2.207.209:51051 to 10.2.207.202:5080, [0x2c1c820:931] MBLB internal error.

Conditions:
-- BIG-IP Virtual Edition (VE) running on 2000/4000 platforms using RSS hash.
-- Platforms with more than 1 tmm.

Impact:
Mirrored connections on the standby unit are removed.

Workaround:
-- On BIG-IP VE, add the following to tmm_init.tcl on both units and restart tmm:
 ndal ignore_hw_dag yes


935769-4 : Upgrading / Rebooting BIG-IP with huge address-list configuration takes a long time

Component: Advanced Firewall Manager

Symptoms:
Version upgrade takes more time than usual when the config contains address-lists with a lot of IP addresses. The same delay will be observed with 'tmsh load sys config' as well.

Conditions:
-- Configure address-list with 10K to 20K IP addresses or address ranges or subnets.
-- Attempt upgrade / reboot of the platform.

Impact:
Version upgrade / 'tmsh load sys config' process takes a long time than usual.

Workaround:
1) Convert continuous individual addresses in the address-lists to IP address ranges and subnets if possible.

2) Remove the huge address-lists from config before the upgrade and add back after the upgrade process is finished.


935485-1 : BWC: flows might stall when using dynamic BWC policy

Component: TMOS

Symptoms:
When multiple flows are passing through the single instance of BWC policy, one or more flows might stall for a few seconds or more. The fairness among the flows is also affected.

Conditions:
-- BWC dynamic policy is enabled.
-- Multiple flows are passing through a single instance of the BWC dynamic policy.

Impact:
Some of the flows may stall.

Workaround:
None.


935249-1 : GTM virtual servers have the wrong status

Component: Global Traffic Manager (DNS)

Symptoms:
GTM virtual servers have the wrong status (up when they should be down, or down when they should be up).

Conditions:
-- The GTM virtual servers are monitored with an HTTP or HTTPS monitor that performs HTTP status matching.

-- The status code (for example, 200) being searched for in the response appears elsewhere than in the first line (for example, in a following header).

Impact:
The system incorrectly matches the status code in a response line which is not the Status-Line. As a result, the availability status reported for a virtual server may be incorrect. This may cause the GTM system to send traffic to unsuitable resources causing application disruptions.

Workaround:
You can work around this issue by not performing HTTP status matching in your HTTP/HTTPS GTM monitors.


935193-2 : With APM and AFM provisioned, single logout ( SLO ) fails

Component: Local Traffic Manager

Symptoms:
SAML Single log out (SLO) fails on BIG-IP platforms. The SAML module on the BIG-IP system reports following error messages:

-- SAML SSO: Error (12) Inflating SAML Single Logout Request
-- SAML SSO: Error (12) decoding SLO message
-- SAML SSO: Error (12) extracting SAML SLO message

Conditions:
Failures occur with Redirect SLO.

Impact:
SAML single logout does not work.

Workaround:
Use POST binding SLO requests.


935177-1 : IPsec: Changing MTU or PMTU settings on interface mode tunnel cores tmm

Component: TMOS

Symptoms:
TMM crashes when the maximum transmission unit (MTU) or 'Use PMTU' setting is changed while passing IPsec traffic.

Conditions:
-- IPsec tunnel configured and passing traffic.
-- The MTU or 'Use PMTU' setting for the IPsec tunnel (in interface mode) is changed.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Do not change MTU or PMTU settings for the tunnel while it is passing traffic.

The settings can be changed while passing traffic, but TMM may crash very soon after the change. If the settings are changed and TMM does not crash soon after, then it will not spontaneously crash at some later point.


934941-1 : Platform FIPS power-up self test failures not logged to console

Component: TMOS

Symptoms:
The BIG-IP system does not log FIPS power-up self-test failures to the console.

Conditions:
A FIPS failure occurs during the power-up self test.

Impact:
Platform FIPS failures are made more difficult to identify and diagnose, because the system console fails to include anything at all that indicates a failure.

Workaround:
None.


934697-4 : Route domain not reachable (strict mode)

Component: Local Traffic Manager

Symptoms:
Network flows are reset and errors are found in /var/log/ltm:

Route domain not reachable (strict mode).

Conditions:
Either:
-- LTM with iRules configured.
-- The iRule directs traffic to a node that is in a route domain.
Or:
-- LTM with an LTM policy configured.
-- The policy directs traffic to a node that is in a route domain.

Impact:
Traffic is not sent to the node that is in a route domain.

The iRule 'node' method and/or LTM policy 'node' specification require a route_domain to be specified in order for the traffic to be sent to a node that is assigned to a route domain.

Workaround:
Specify the node along with Route domain ID.

For iRules, change from this:

when HTTP_REQUEST {
 node 10.10.10.10 80
}

To this (assuming route domain 1):

when HTTP_REQUEST {
 node 10.10.10.10%1 80
}

For LTM policies, change from this:

actions {
    0 {
        forward
        select
        node 10.2.35.20
    }
}


To this (assuming route domain 1):

actions {
    0 {
        forward
        select
        node 10.2.35.20%1
    }
}


934241-1 : TMM may core when using FastL4's hardware offloading feature

Component: TMOS

Symptoms:
TMM cores.

Conditions:
FastL4's hardware offloading is used.

Because the error is an internal software logic implementation, there is no direct specific configuration that triggers this error condition. A quick traffic spike during a short period of time makes it more likely to occur.

Impact:
TMM cores and the system cannot process traffic. Traffic disrupted while tmm restarts.

Workaround:
Disable PVA/EPVA on all FastL4 profiles


934065-2 : The turboflex-low-latency and turboflex-dns are missing.

Component: TMOS

Symptoms:
The turboflex-low-latency and turboflex-dns profiles are no longer available in 15.1.x and 16.0.x software releases.

Conditions:
The turboflex-low-latency or turboflex-dns in use.

Impact:
Unable to configure turboflex-low-latency or turboflex-dns profiles after an upgrade to 15.1.x or 16.0.x software release.

Workaround:
None.


933777-4 : Context use and syntax changes clarification

Component: Application Visibility and Reporting

Symptoms:
There are 2 issues:
1) tmsh analytics commands related to server side connections changed in 14.x
2)"max-tps" is non-cumulative and cannot be used in this context

Conditions:
Using tmsh analytics commands in BIG-IP v14.x and higher

Impact:
1) tmsh commands (related to server side connections) should be written differently in 14.x+
2)The "max-tps" measure is not applicable in the 'client-ip' context

Workaround:
There are 2 issues:
1)tmsh display name changed from total-server-side-conns to server-side-conns etc (14.x+)
2)Change the "max-tps" attribute "commutative" from false to true and change the merge formula from SUM to MAX


933329-1 : The process plane statistics do not accurately label some processes

Component: TMOS

Symptoms:
The plane process statistics can be used to track the statistics of processes even though the process ID has changed over time. The processes are characterized as belonging to the control plane, data plane, or analysis plane. Some of the processes are incorrectly labeled.

Conditions:
Viewing the plane process statistics when diagnosing plane usage on the BIG-IP system.

Impact:
The percentage of usage of each plane can be confusing or incorrect.

Workaround:
None.


932893-1 : Content profile cannot be updated after redirect from violation details in Request Log

Component: Application Security Manager

Symptoms:
BIG-IP issues a redirect to the content profile form that contains relevant violation details in the Request Log. If you follow this redirect and try to update profile, the action fails.

Conditions:
This occurs if you follow the redirect to the content profile page from the violation details page in the Request Log, and then try to update the profile

Impact:
You are unable to update the content profile.

Workaround:
Go to the list content profile page, and update the content profile from there.


932857-1 : Delays marking Nodes or Pool Members DOWN with in-TMM monitoring

Component: Local Traffic Manager

Symptoms:
When configured with a large number of in-TMM monitors, Nodes or Pool Members may not be marked DOWN immediately after the configured timeout period once the target stops responding to pings.

Conditions:
This may occur when:
-- In-TMM monitoring is enabled (via sys db bigd.tmm).
-- A large number of Nodes and/or Pool Members (several hundreds or thousands) are configured and monitored.

Impact:
Nodes or Pool Members which are not responsive may not be marked DOWN in a timely fashion.

Workaround:
You can work around this issue by disabling in-TMM monitoring, at the expense of decreased monitoring performance (higher CPU usage by the bigd daemon).


932737-4 : DNS & BADOS high-speed logger messages are mixed

Component: Anomaly Detection Services

Symptoms:
Both DNS and BADOS messages use the same family ID, and the reported messages are categorized together.

Conditions:
BADOS & DNS are run together and application is under attack (BADOS). At this point, BIG-IP will generate BADOS messages using an ID that conflicts with DNS messages.

Impact:
Reporting will be confusing.


932553-5 : An HTTP request is not served when a remote logging server is down

Component: Local Traffic Manager

Symptoms:
BIG-IP systems provide an option to sanitize HTTP traffic via the http_security profile. When the profile is configured to alarm on a violation, it is possible that a connection to the violating client is reset if a remote logging server is marked down.

Conditions:
-- A BIG-IP system has an HTTP profile and and an http_security profile with the alarm option set.
-- A remote logging server is configured via a BIG-IP pool.
-- The pool has a monitor that marks all the pool members down.
-- A request with an HTTP violation is processed and triggers an alarm configured in the http_security profile.

Impact:
-- A TCP connection to a client is reset by the BIG-IP system.
-- The web page may not render, or may not render as expected.
-- Data are not delivered to a server with a POST request.

Workaround:
None.


932497-2 : Autoscale groups require multiple syncs of datasync-global-dg

Component: TMOS

Symptoms:
Datasync-global-dg is in 'sync pending' status and is not automatically synced as expected.

Conditions:
Browser Challenges update image is automatically downloaded.

Impact:
Peers are not synced.

Workaround:
Manually sync datasync-global-db group.


932485-4 : Incorrect sum(hits_count) value in aggregate tables

Component: Application Visibility and Reporting

Symptoms:
If the results gathered for sum(hits_count) are very large (e.g., 15000300000), the system does not report the correct values in the AVR tables.

Conditions:
-- Insert a very large amount of data (approximately 4.5 milliard or more) to one of AVR tables.
-- Review the value of the sum(hits_count) column.

Impact:
The system reports incorrect values in AVR tables when dealing with large numbers

Workaround:
None.


932461-4 : Cert update on server SSL profile on HTTPS monitor: BIG-IP not using the updated certificate.

Component: Local Traffic Manager

Symptoms:
If you overwrite the certificate that is configured on the server SSL profile and used with the HTTPS monitor, the BIG-IP system still uses an old certificate.

After you update the certificate, the stored certificate is incremented, but monitor logging indicates it is still using the old certificate.

Conditions:
--Create a pool with an HTTPS pool member.
--Create an HTTPS monitor with cert and key.
--Assign the HTTPS monitor to the HTTPS pool.
--Update the certificate via GUI or tmsh.

Impact:
The monitor still tries to use the old certificate, even after the update.

Workaround:
Use either of the following workarounds:

-- Restart bigd:
bigstart restart bigd

-- Modify the server SSL profile cert key, set it to 'none', and switch back to the original cert key name.

The bigd utility successfully loads the new certificate file.


932213-3 : Local user db not synced to standby device when it is comes online after forced offline state

Component: Access Policy Manager

Symptoms:
Local user db is not synced to the standby device when it comes online after being forced offline.

Conditions:
Valid high availability (HA) configuration.
- Make the standby device forced offline
- create a new local db user in the online device
- bring back the standby device online.

Impact:
The newly created user is not synced to the standby device unless localdbmgr is restarted on the standby.

Workaround:
None


932189-2 : Incorrect BD Swap Size units on ASM Resources chart

Component: Application Visibility and Reporting

Symptoms:
The 'BD Swap Size' reported on the 'Security :: Reporting : ASM Resources : Memory Utilization' page is much too high and incorrect.

Conditions:
ASM provisioned.

Impact:
Graphically reported BD swap memory usage is incorrect.

Workaround:
None.


932137-6 : AVR data might be restored from non-relevant files in /shared/avr_afm partition during upgrade

Component: Application Visibility and Reporting

Symptoms:
After upgrade, AFM statistics show non-relevant data.

Conditions:
BIG-IP system upgrade
-- Leftovers files remain in /shared/avr_afm partition from other versions.

Impact:
Non-relevant data are shown in AFM statistics.

Workaround:
Delete the non-relevant data manually from MariaDB/MySQL.


932045-4 : Memory leak with umem_alloc_80 through creating/deleting LTM node object

Component: Local Traffic Manager

Symptoms:
Memory leak in umem_alloc_80 through creating/deleting an LTM node object.

Conditions:
-- Create a node object.
-- Delete the node object.

Impact:
This gradually causes tmm memory pressure, and eventually severe outcome is possible such as aggressive swiper and tmm restart. Traffic disrupted while tmm restarts.

Workaround:
Refrain continuous creation/deletion of LTM nodes.


931629-4 : External trunk fdb entries might end up with internal MAC addresses.

Component: TMOS

Symptoms:
The vCMP host might have external trunk with internal MAC addresses. This is visible via 'tmsh show net fdb'.

Conditions:
-- vCMP is provisioned and has guests deployed on it.
-- vCMP host uses trunks.
-- Create VLANs using trunks and assign it to guests.
-- Guests need to be in high availability (HA) configuration.

Impact:
Traffic processing is disrupted.

Workaround:
None.


931469-8 : Redundant socket close when half-open monitor pings

Component: Local Traffic Manager

Symptoms:
Sockets and log files are closed and re-opened twice instead of one time when the half-open TCP monitor pings successfully.

Conditions:
This occurs when the half-open monitor pings successfully.

Impact:
Minor performance impact.

Workaround:
None.


931149-2 : Some RESOLV::lookup queries, including PTR lookups for RFC1918 addresses, return empty strings

Component: Global Traffic Manager (DNS)

Symptoms:
RESOLV::lookup returns an empty string.

Conditions:
The name being looked up falls into one of these categories:

-- Forward DNS lookups in these zones:
    - localhost
    - onion
    - test
    - invalid

-- Reverse DNS lookups for:
    - 127.0.0.0/8
    - ::1
    - 10.0.0.0/8
    - 172.16.0.0/12
    - 192.168.0.0/16
    - 0.0.0.0/8
    - 169.254.0.0/16
    - 192.0.2.0/24
    - 198.51.100.0/24
    - 203.0.113.0/24
    - 255.255.255.255/32
    - 100.64.0.0/10
    - fd00::/8
    - fe80::/10
    - 2001:db8::/32
    - ::/64

Impact:
RESOLV::lookup fails.

Workaround:
Use a DNS Resolver ('net dns') and RESOLVER::name_lookup / DNSMSG:: instead of RESOLV::lookup:

1. Configure a local 'net dns' resolver, replacing '192.88.99.1' with the IP address of your DNS resolver:

    tmsh create net dns-resolver resolver-for-irules answer-default-zones no forward-zones add { . { nameservers add { 192.88.99.1:53 } } }

2. Use an iRule procedure similar to this to perform PTR lookups for IPv4 addresses:

proc resolv_ptr_v4 { addr_v4 } {
    # Convert $addr_v4 into its constituent bytes
    set ret [scan $addr_v4 {%d.%d.%d.%d} a b c d]
    if { $ret != 4 } {
        return
    }

    # Perform a PTR lookup on the IP address $addr_v4, and return the first answer
    set ret [RESOLVER::name_lookup "/Common/resolver-for-irules" "$d.$c.$b.$a.in-addr.arpa" PTR]
    set ret [lindex [DNSMSG::section $ret answer] 0]
    if { $ret eq "" } {
        # log local0.warn "DNS PTR lookup for $addr_v4 failed."
        return
    }

    # Last element in '1.1.1.10.in-addr.arpa. 600 IN PTR otters.example.com'
    return [lindex $ret end]
}

-- In an iRule, instead of:
    RESOLV::lookup @192.88.9.1 $ipv4_addr
Use:
    call resolv_ptr_v4 $ipv4_addr


931033-2 : Device ID Deletions anomaly might be raised in case of browser/hardware change

Component: Application Security Manager

Symptoms:
-- Valid users complain they are unable to connect, or they are required to do CAPTCHA frequently.
-- On the BIG-IP device, 'Device ID Deletion' violations are being raised.

Conditions:
-- Bot Defense Profile with 'Device ID' mode set to 'Generate After Access' is attached to the virtual server.
-- Some change in the browser or computer hardware occurs.
-- Surfing to multiple qualified pages at the same time.

Impact:
Valid requests might be mitigated.

Workaround:
Raise the threshold of 'Device ID Deletion' anomaly (recommended value according to the webserver, is approximately 4).


930825-5 : System should reboot (rather than restart services) when it sees a large number of HSB XLMAC errors

Component: TMOS

Symptoms:
The following symptoms may be seen when the HSB is experiencing a large number of XLMAC errors and is unable to recover from the errors. After attempting XLMAC recovery fails, the current behavior is to failover to the peer unit and go-offline and down links.

This can be seen the TMM logs:
-- notice The number of the HSB XLMAC recovery operation 11 or fcs failover count 0 reached threshold 11 on bus: 3.
-- notice HA failover action is triggered due to XLMAC/FCS errors on HSB1 on bus 3.
-- notice HSBE2 1 disable XLMAC TX/RX at runtime.
-- notice HA failover action is cleared.

Followed by a failover event.

Conditions:
It is unknown under what conditions the XLMAC errors occur.

Impact:
The BIG-IP system fails over.

Workaround:
Modify the default high availability (HA) action for the switchboard-failsafe to reboot instead of go offline and down links.


930741-3 : Truncated or incomplete upload of a BIG-IP image causes kernel lockup and reboot

Component: TMOS

Symptoms:
If there is a truncated BIG-IP software image in /shared/images, a kernel lockup and reboot could occur.

One way to have a truncated image in /shared/images is by using iControl/SOAP to upload the image. Using SOAP, the image is uploaded in chunks, so until the last chunk is uploaded, the image is not complete/is truncated.

Conditions:
-- Truncated BIG-IP image in /shared/images
-- Using SOAP to upload the image.

Impact:
Traffic disruption caused by the reboot.

Workaround:
If you are using SOAP to upload BIG-IP software images, upload them to /shared first and then move them to /shared/images.


930217-2 : Zone colors in ASM swap usage graph are incorrect

Component: Application Visibility and Reporting

Symptoms:
In GUI ASM memory utilization chart, 'BD swap size, Total swap size' graph show inconsistent background colors. It looks like these colors are assigned with an assumption that swap usage is shown as percentage but it is shown as absolute value.

Conditions:
-- ASM is provisioned.
-- Viewing ASM memory utilization chart/

Impact:
Potential confusion viewing colors in ASM memory utilization chart.

Workaround:
None. This is a cosmetic issue only.


929813-3 : "Error loading object from cursor" while updating a client SSL profile

Component: TMOS

Symptoms:
When updating a client-ssl profile in the GUI, the update fails and the GUI displays the following error:
  "Error loading object from cursor"

Conditions:
- Client SSL profiles with inheritance: Parent -> Child -> Grand Child.

- Parent SSL profile uses cert-key-chain

Impact:
Unable to edit the profile using the GUI.

Workaround:
Use tmsh or iControl to update the Client SSL profile


929429-1 : Oracle database monitor uses excessive CPU when Platform FIPS is licensed

Component: Local Traffic Manager

Symptoms:
Whenever you create Oracle monitors, and add a member to the monitor, every time the OpenSSL libraries are loaded for a new connection, high CPU usage occurs.

Conditions:
-- Create an Oracle LTM monitor.
-- Add a pool member to the Oracle monitor created.
-- Platform FIPS is licensed.

Impact:
High CPU Usage due to the loading of libraries whenever new connection is created.

Workaround:
None.


929133-1 : TMM continually restarts with errors 'invalid index from net device' and 'device_init failed'

Component: TMOS

Symptoms:
VLANs with a name that that start with "eth" will cause tmm to fail and restart.

Conditions:
Vlan name that starts with "eth"

Impact:
Since tmm fails to start, the BIG-IP cannot serve traffic.

Workaround:
Rename all vlans that start with "eth"


928857-1 : Use of OCSP responder may leak X509 store instances

Component: Local Traffic Manager

Symptoms:
The use of OCSP responder may cause X509 certificate store instances to be leaked, eventually causing memory pressure.

Conditions:
OCSP responder configured.

Impact:
TMM ssl_compat memory usage grows over time, eventually causing memory pressure, and potentially a traffic outage due to TMM restart. Traffic disrupted while tmm restarts.

Workaround:
No workaround.


928805-1 : Use of OCSP responder may cause memory leakage

Component: Local Traffic Manager

Symptoms:
Use of OCSP responder may cause small amounts of SSL memory to be leaked, eventually leading to memory pressure.

Conditions:
OCSP responder configured.

Impact:
TMM SSL memory usage grows over time, eventually causing memory pressure, and potentially a traffic outage due to TMM restart. Traffic disrupted while tmm restarts.

Workaround:
No workaround.


928789-1 : Use of OCSP responder may leak SSL handshake instances

Component: Local Traffic Manager

Symptoms:
Use of OCSP responder may cause SSL handshake instances to be leaked eventually leading to memory pressure.

Conditions:
OCSP responder configured.

Impact:
TMM ssl_hs memory usage grows over time, eventually causing memory pressure, and potentially a traffic outage due to TMM restart.

Workaround:
No workaround.


928717-4 : [ASM - AWS] - ASU fails to sync

Component: Application Security Manager

Symptoms:
Live Update configuration is not updated.

Conditions:
-- The BIG-IP device being removed from the device group is also the last commit originator. (You might encounter this on AWS as a result of auto-scale.)
-- A new device is added to the device group.
-- Initial sync is pushed to the new device.

Impact:
Automatic signature updates (ASU) fail to sync.

Workaround:
Make a spurious change to Live Update from another device in the group and sync it to the group, for example:

1. Set the 'Installation of Automatically Downloaded Updates' to Scheduled and save.
2. Then return the setting to its previous state, and save again.


928697-1 : Incorrect logging of proposal payloads from remote peer during IKE_SA_INIT

Component: TMOS

Symptoms:
When debug mode is enabled, racoon2 logs packet payloads during IKE negotiation. When multiple proposals are present in an IKE_SA_INIT packet, the logging of the proposal payloads is incorrect.

Conditions:
The initiator sends more than one proposal.

Impact:
Diagnosing connection issues is more difficult.

Workaround:
During debugging, ignore IKE_SA_INIT packet dump in the logs.


928665-3 : Kernel nf_conntrack table might get full with large configurations.

Component: TMOS

Symptoms:
Linux host connections are unreliable, and you see warning messages in /var/log/kern.log:

warning kernel: : [182365.380925] nf_conntrack: table full, dropping packet.

Conditions:
This can occur during normal operation for configurations with a large number of monitors, for example, 15 KB active entries.

Impact:
Monitors are unstable/not working at all.

Workaround:
1. Modify /etc/modprobe.d/f5-platform-el7-conntrack-default.conf
increasing the hashsize value:

options nf_conntrack hashsize=262144

2. Save the file.
3. Reboot the system.


928389-1 : GUI become inaccessible after importing certificate under import type 'certificate'

Component: TMOS

Symptoms:
Current implementation causes httpd down and makes the GUI inaccessible as soon as you import a new cert.

Conditions:
Upload new cert using Import-type 'Certificate' option.

Impact:
The GUI inaccessible as soon as you import a cert using import-type 'Certificate'.

Workaround:
Manually copy the correct key.


928353-1 : Error logged installing Engineering Hotfix: Argument isn't numeric

Component: TMOS

Symptoms:
When installing an Engineering Hotfix, the following error may be logged in /var/log/liveinstall.log:

Argument "" isn't numeric in numeric eq (==) at /var/tmp/install/pkgcpio/usr/local/lib/tm_install/Hotfix.pm line 651.

Conditions:
This error may occur when installing an Engineering Hotfix, if the Engineering Hotfix does not include an update to the nash-initrd component.

Impact:
The error message gives a mistaken impression that the Engineering Hotfix did not install successfully. However, it does install correctly, and the system operates without issue. You can safely ignore this message.

Workaround:
None.


928177-3 : Syn-cookies might get enabled when performing multiple software upgrades.

Component: Advanced Firewall Manager

Symptoms:
Syn-cookie protection of FastL4/TCP profile might get enabled when performing multiple software upgrades.

Conditions:
-- Performing an upgrade from version earlier than 14.0.0 to a version higher than or equal to 14.0.0.
-- Then performing another upgrade.

Impact:
Value of profile attribute syn-cookie-enable might be changed during an upgrade.

Workaround:
Save configuration before starting each upgrade.


928161-2 : Local password policy not enforced when auth source is set to a remote type.

Component: TMOS

Symptoms:
The local password policy is not enforced when the auth source type is set to Remote. Any non-default password policy changes are not enforced for local users.

Conditions:
1) Some part of the local password policy has been changed from the default values, for example, changing the password required-uppercase to 2 .

2) The auth source is set to a remote source, such as LDAP, AD, or TACACS.

Impact:
The system does not enforce any of the non-default local password policy options.

For example, even if the required-uppercase is set to 2, a local user's password can be set to something less than 2.

Even if the minimum-length is set to 12, a local user's password can be set to something less than 12.

Another example, even if the max-duration is set to 90 days, the password does not expire for 99999 days (the default).

Workaround:
None


927713-3 : Secondary blade IPsec SAs lost after standby reboot using clsh reboot

Component: Local Traffic Manager

Symptoms:
-- When 'clsh reboot' is executed on the primary blade, it internally calls ssh reboot on all secondary blades and then reboots the primary blade. The 'clsh reboot' script hangs, and there is a delay in rebooting the primary blade.
-- Running 'ssh reboot' on secondary blades hangs due to sshd sessions getting killed after network interface down.

Conditions:
-- Running 'clsh reboot' on the primary blade.
-- Running 'ssh reboot' on secondary blades.

Impact:
Secondary blade IPSec Security Associations (SAs) are lost, resulting in SA sync issues.

Workaround:
Perform a reboot from the GUI.


927633-1 : Failure path in external datagroup internal mapping operation failure may result in 'entry != NULL' panic

Component: Local Traffic Manager

Symptoms:
Log messages written to /var/log/ltm:
-- notice tmm2[30394]: 01010259:5: External Datagroup (/Common/dg1) queued for update.
-- notice panic: ../kern/sys.c:1081: Assertion "entry != NULL" failed.

Conditions:
-- Create datagroups.
-- Some condition causes a datagroup to not be present (e.g., delete, rename operations, or another, internal operation).
-- Load the config.

Impact:
Internal mapping of external datagroup fails. Datagroup creation fails.

Workaround:
None.


927589-2 : ILX::call command response get truncated

Component: Local Traffic Manager

Symptoms:
If a response to an ILX::call command is larger than 64 KB, data is truncated.

Conditions:
-- iRule script including an ILX::call command in use.
-- Return response is greater than 64 KB.

Impact:
iRule fails and the connection aborts.

Workaround:
None.


927569-1 : HTTP/3 rejects subsequent partial SETTINGS frames

Component: Local Traffic Manager

Symptoms:
HTTP/3 aborts the connection upon receipt of a 'second' SETTINGS frame.

Conditions:
HTTP/3 first receives an incomplete SETTINGS frame, followed by more SETTINGS frame bytes.

Impact:
Connection fails to complete.

Workaround:
None.


927441-4 : Guest user not able to see virtual server details when ASM policy attached

Component: TMOS

Symptoms:
When ASM is attached to a Virtual Server, a BIG-IP user account configured with the Guest role cannot see virtual server details. An error message is printed instead:
01070823:3: Read Access Denied: user (guestuser) type (GTM virtual score).

Conditions:
-- ASM Policy attached to virtual server.
-- Logging onto the BIG-IP system using an account configured with the guest user role.
-- Running the command:
tmsh show ltm virtual detail

Impact:
Cannot view virtual server details.

Workaround:
None.


926985-1 : HTTP/3 aborts stream on incomplete frame headers

Component: Local Traffic Manager

Symptoms:
HTTP/3 streams abort at seemingly arbitrary times when BIG-IP is receiving large amounts of data.

Conditions:
HTTP/3 receives an incomplete frame header on a given stream.

Impact:
Data transfer is incomplete.

Workaround:
None


926929-4 : RFC Compliance Enforcement lacks configuration availability

Component: Local Traffic Manager

Symptoms:
Earlier versions contained fixes that enforce several RFC compliance items for HTTP requests and response processing by BIG-IP systems. Enforcement for some of these items is unavoidable, but might cause issues for certain applications.

Conditions:
The configuration has a virtual server with an HTTP profile.

Impact:
Some applications that allows certain constructions after a header name may not function.

Workaround:
None.


926757-3 : ICMP traffic to a disabled virtual-address might be handled by a virtual-server.

Component: Local Traffic Manager

Symptoms:
ICMP traffic to a disabled virtual-address might be handled by a virtual-server.

Conditions:
Virtual-server with an address space overlapping with a self-IP, capable of handling ICMP traffic, for example:
ip-forward wildcard 0.0.0.0/0 virtual-server

Impact:
ICMP traffic to a virtual-address might be handled by a virtual-server.

Workaround:
There is no workaround.


926549-2 : AFM rule loops when 'Send to Virtual' is used with Virtual Server iRule 'LB::reselect'

Component: Advanced Firewall Manager

Symptoms:
With some configurations, executing a command such as 'tmsh show security firewall global-rules active' loops continuously, causing stat counters to rise, and possibly log messages to be written to /var/log/ltm.

Conditions:
-- AFM is routing traffic to a Virtual Server through the 'Send to Virtual' option.
-- The target Virtual Server uses the 'LB_FAILED' iRule to select a new Virtual Server through virtual command and 'LB::reselect'.

Impact:
The iRule loops continuously, causing stat counters to rise, and possibly logging messages in /var/log/ltm.

Workaround:
This configuration should be avoided, but if it is used, and if this does happen, you can restart tmm:
bigstart restart tmm

This stops the current looping, until it is triggered again.

Impact of workaround: Traffic disrupted while tmm restarts.


926513-1 : HTTP/2 clone pool fails to receive traffic with the clone pool (server) option selected.

Component: Local Traffic Manager

Symptoms:
HTTP/2 Clone pools are not working when the Clone Pool (Server) option is selected. This issue occurs when a HTTP/2 profile (Server) or HTTP/2 full-proxy configuration is enabled and an HTTP/2 clone pool is set on a virtual server. This issue prevents traffic from being copied to the appropriate clone pool member.

Conditions:
A virtual server provisioned with the following configuration:

--HTTP/2 default pool.
--HTTP/2 clone pool (server).
--HTTP/2 profile (server) or HTTP/2 profile full-proxy configuration.

Impact:
Clone pools (server) do not mirror HTTP/2 traffic.

Workaround:
None.


926425-2 : Hardware SYN Cookies may not deactivate after the SYN attack ends and valid TCP traffic starts

Component: Advanced Firewall Manager

Symptoms:
Hardware SYN Cookies activated on a virtual server under a SYN attack may not deactivate after the SYN attack ends and valid TCP traffic starts. The non-supported TCP options under SYN Cookie protection continue to be unsupported until hardware SYN cookies are disabled.

Conditions:
A SYN flood attack or similar SYN attack where SYNs are flooded into BIG-IP system.

Impact:
This can successfully cause hardware SYN cookies to be activated on the BIG-IP virtual server under attack. However, once the attack subsides and falls below the SYN check threshold, SYN cookies may not immediately deactivate.

Because SYN cookie protection is still active, and because under SYN cookie protection some TCP options are not supported, the options are not taken into account when processing traffic. For example, under SYN cookie protection, MSS is fixed to a few sizes. For traffic that arrives with a different MSS size, the system uses a supported size instead.

Workaround:
You can use any of the following to clear the HSB issue:
-- Restart neurond.
-- Restart TMM,
-- Reboot the device.


925797-1 : Full config sync fails and mcpd memory usage is very high on the receiving device with thousands of FQDN pools members

Component: TMOS

Symptoms:
There there are thousands of FQDN nodes and thousands of pools that have FQDN pool members, mcpd can run out of memory during a full config sync.

The mcpd process might fail and restart or it might remain running but have its virtual memory so fragmented that queries to mcpd might fail to allocate memory.

One of signs that this has occurred is a non-zero free_fail count in the tmstat table vmem_kstat.

Conditions:
-- Thousands of FQDN nodes
-- Thousands of pools with FQDN pool members
-- Full config sync.

Impact:
-- The mcpd process might restart.
-- The config save operation fails:
tmsh save /sys config fails
-- Other queries to mcpd fail.

Workaround:
None.


924945-4 : Fail to detach HTTP profile from virtual server

Component: Application Visibility and Reporting

Symptoms:
The virtual server might stay attached to the initial HTTP profile.

Conditions:
Attaching new HTTP profiles or just detaching an existing one.

Impact:
The virtual server stays attached to the former HTTP profile, meaning that the virtual server might be attached to a different HTTP profile than what the GUI displays. Configuration changes to the HTTP profile the GUI shows as attached are not reflected in the virtual server. For example, the new HTTP profile might enable XFF, but if the former attached profile does not enable it, the virtual server does not accept XFF.

Workaround:
Create new similar virtual server and attach it to the correct HTTP profile.


924857-3 : Logout URL with parameters resets TCP connection

Component: Access Policy Manager

Symptoms:
TCP connection reset when 'Logout URI Include' configured.

Conditions:
-- Access Policy with a valid 'Logout URI Include' string, e.g.:
 /logoff.html
-- Request to 'Logout URI Include' URI from user-agent that includes a query parameter string, e.g.:
 /logoff.html?a=b

Impact:
TCP connection resets, reporting BIG-IP APM error messages.

'Logout URI Include' does not support custom query strings in logout URIs to include. For example, with a 'Logout URI Include' value of /logoff.html, if a user-agent sends a logout URI request in the form of /logoff.html?a=b, logout URI validation resets the connection and reports an error:
-- Access encountered error: ERR_ARG. File: ../modules/hudfilter/access/access.c, Function: access_check_uri_type.


Note: BIG-IP APM prohibits the configuration of 'Logout URI Include' from containing a query string on the BIG-IP system. For example, attempting to configure 'Logout URI Include' with a URI in the form of /logoff.html?a=b fails and displays error messages:
-- Configuration error: Configured URI (/logoff.html?a=b) is not allowed to contain query parameter.

Workaround:
None


924697-1 : VDI data plane performance degraded during frequent session statistic updates

Component: Access Policy Manager

Symptoms:
Data plane performance for VDI use cases (Citrix/VMware proxy) is degraded during frequent access session statistic updates.

Conditions:
APM is used as VDI proxy for Citrix or VMware.

Impact:
APM's VDI proxy does not perform to its full capacity.

Workaround:
None.


924589-5 : PEM ephemeral listeners with source-address-translation may not count subscriber data

Component: Policy Enforcement Manager

Symptoms:
When a PEM profile is associated with a protocol that can create dynamic server-side listeners (such as FTP), and source-address-translation is also enabled on the virtual server, traffic on that flow (for example ftp-data) is not associated with the subscriber, and is therefore not counted or categorized.

Conditions:
-- Listener configured with PEM and FTP profiles
-- Some form of source address translation is enabled on the listener (for example, SNAT, Automap, SNAT Pool)

Impact:
Inaccurate subscriber traffic reporting and classification.

Workaround:
None.


924521-4 : OneConnect does not work when WEBSSO is enabled/configured.

Component: Access Policy Manager

Symptoms:
OneConnect is a feature that reuses server-side connections. When WEBSSO is enabled, it always creates a new server-side connection, and does not reuse pooled connections.

Conditions:
Virtual server configured with both a WEBSSO and a OneConnect profile.

Impact:
Idle server-side connections that should be eligible for reuse by the virtual server are not used. This might lead to buildup of idle server-side connections, and may result in unexpected 'Inet port exhaustion' errors.

Workaround:
None.


924297-3 : Ltm policy MCP objects are not being synced over to the peer device

Component: TMOS

Symptoms:
An LTM policy does not sync to the peer device, but the devices report "In Sync".

Conditions:
-- Sync/failover device group with full load on sync disabled
-- A draft policy is attached to a parent policy's rule actions and published.
-- A config sync occurs (manually or automatically)

Impact:
The LTM policy does not sync to the peer device.

Workaround:
Perform a full config sync:

tmsh run cm config-sync force-full-load-push to-group <device group name>


923745-4 : Ctrl-Alt-Del reboots the system

Component: TMOS

Symptoms:
A device reboot occurs when pressing Ctrl-Alt-Del.

Conditions:
This occurs when pressing Ctrl-Alt-Del or sending the command to a BIG-IP Virtual Edition (VE) virtual console.

Impact:
Accidental reboots are possible. You should not reboot VE using Ctrl-Alt-Del.

Workaround:
Run the following command:

systemctl mask ctrl-alt-del.target


923221-2 : BD does not use all the CPU cores

Component: Application Security Manager

Symptoms:
Not all the CPUs are utilized. The CPUs that are not loaded are those with ID greater than 31.

Conditions:
BIG-IP is installed on a device with more than 32 cores.

Impact:
ASM does not use all of the available CPU cores.

Workaround:
1. Modify the following file on the BIG-IP system:
   /usr/local/share/perl5/F5/ProcessHandler.pm

Change this:
  ALL_CPUS_AFFINITY => '0xFFFFFFFF'

To this:
  ALL_CPUS_AFFINITY => '0xFFFFFFFFFFFF',

2. Restart the asm process:
   bigstart restart asm.


923125-3 : Huge amount of admd processes caused oom

Component: Anomaly Detection Services

Symptoms:
The top command shows that a large number of admd processes are running.

Conditions:
-- Configuration with Sync-Failover device groups and BADOS.
-- Some stressful (unknown) condition occurs.

Impact:
Memory is exhausted.

Workaround:
Restart admd:
bigstart restart admd


922885-1 : BIG-IP Virtual Edition does not pass traffic on ESXi 6.5

Solution Article: K27872027

Component: TMOS

Symptoms:
BIG-IP Virtual Edition (VE) does not pass traffic when deployed on ESXi 6.5 hypervisors, when the VE is using VMXNET 3 network interfaces (VMXNET 3 interfaces are the default).

'tmsh show net interface' indicates that one or more interfaces are not initialized.

Conditions:
-- BIG-IP VE running on VMware ESXi 6.5 hypervisor.

Impact:
Traffic does not pass through non-mgmt interfaces.

Workaround:
-- On the BIG-IP systems, you can switch to the 'sock' driver.

Note: The workarounds that switch driver must be applied individually to devices, as they do not synchronize via ConfigSync.

IMPORTANT: The driver must be configured the same way on all devices in a sync-failover device group.

1, At the command prompt, run the following command to enable the sock driver in tmm_init.tcl:

echo "device driver vendor_dev 15ad:07b0 sock" >> tmm_init.tcl

2. Restart tmm:

tmsh restart sys service tmm

-- After restarting, the sock driver should be listed in the 'driver_in_use' column when running the following command.

tmctl -d blade tmm/device_probed
pci_bdf pseudo_name type available_drivers driver_in_use
------------ ----------- --------- --------------------- -------------
0000:03:00.0 F5DEV_PCI xnet, vmxnet3, sock,
0000:0b:00.0 1.1 F5DEV_PCI xnet, vmxnet3, sock, sock
0000:13:00.0 1.2 F5DEV_PCI xnet, vmxnet3, sock, sock
0000:1b:00.0 1.3 F5DEV_PCI xnet, vmxnet3, sock, sock


922785-1 : Live Update scheduled installation is not installing on set schedule

Component: Application Security Manager

Symptoms:
A scheduled live update does not occur at the scheduled time.

Conditions:
A scheduled installation is set for only a single day, between 00:00-00:14.

Impact:
Automated installation does not initiate

Workaround:
There are two options:
1. Install the update manually.
2. Set two consecutive days where the second day is the day with the schedule set between 00:00-00:14


922641-5 : Any iRules that park in a clientside or serverside command leave the iRule attached to the wrong flow

Component: Local Traffic Manager

Symptoms:
iRule commands issued after a clientside or serverside command operate on the wrong peer flow.

Conditions:
An iRule contains a script that parks in a clientside or serverside command.

Examples of parking commands include 'table' and 'persist'.

Impact:
The iRule commands operate on the wrong peer flow.

Workaround:
Avoid using commands that park inside the clientside or serverside command.


922613-3 : Tunnels using autolasthop might drop traffic with ICMP route unreachable

Component: TMOS

Symptoms:
Traffic that should be encapsulated and sent via tunnel might get dropped with an ICMP error, destination unreachable, unreachable route. This happens in a scenario where no route exists towards the remote tunnel endpoint and the BIG-IP system relies on autolasthop to send the encapsulated traffic back to the other end of the tunnel.

Conditions:
No route exists to the other end of the tunnel.

Impact:
Traffic dropped with ICMP error, destination unreachable, unreachable route.

Workaround:
Create a route towards the other remote end of the tunnel.


922413-1 : Excessive memory consumption with ntlmconnpool configured

Component: Local Traffic Manager

Symptoms:
OneConnect allows load balancing of HTTP requests from the same client connection over a pool of server side connections. When NTLM authentication is used, the NTLM Conn Pool allows reuse of server-side connections for authenticated client side connections. It holds HTTP authentication headers which is no longer necessary once a client is authenticated.

Conditions:
-- The virtual server is configured with both OneConnect and NTLM Conn Pool profiles.
-- A large number of client systems with NTLM authentication are load balanced via the virtual server with long-lived connections.

Impact:
The BIG-IP system experiences memory pressure, which may result in an out-of-memory condition and a process crash, and potentially cause failover and interruption of traffic processing.

Workaround:
None.


922297-1 : TMM does not start when using more than 11 interfaces with more than 11 vCPUs

Component: TMOS

Symptoms:
TMM may not start when using more than 11 network interfaces with more than 11 vCPUs configured.

You see the following log entries in /var/log/tmm:

-- notice ixlv(1.1)[0:5.0]: Waiting for tmm10 to reach state 1...

In the TMM log for that TMM, you can see that it is waiting for tmm0, e.g.:

-- notice ixlv(1.10)[0:6.0]: Waiting for tmm0 to reach state 2...

Conditions:
-- BIG-IP Virtual Edition (VE).
-- More than 11 interfaces configured.
-- More than 11 vCPUs configured.

Impact:
TMM does not start.

Workaround:
Configure fewer network interfaces or vCPUs.


922261-1 : WebSocket server messages are logged even it is not configured

Component: Application Security Manager

Symptoms:
BIG-IP systems send unexpected WebSocket server messages to the remote logging server.

Conditions:
-- ASM provisioned.
-- ASM policy and WebSocket profile attached to a virtual server.
-- More than one remote logging profile is attached to a virtual server.
-- One of the remote loggers has response-logging=all.

Impact:
Remote logging server overloaded with unexpected WebSocket messages.

Workaround:
Set response-logging=illegal in all remote logging profiles.


922185-2 : LDAP referrals not supported for 'cert-ldap system-auth'

Component: TMOS

Symptoms:
Admin users are unable to log in.

Conditions:
-- Remote LDAP auth enabled.
-- Administrative users are authenticated with the 'cert-ldap' source.
-- The admin user tries to log in.

Impact:
The cert-ldap authentication does not work, so login fails.

Workaround:
Manually edit the /etc/nslcd.conf and set the referrals to no.


922153-1 : Tcpdump is failing on tmm 0.x interfaces

Component: TMOS

Symptoms:
The tcpdump command exits immediately with an error:
 errbuf ERROR:TMM side closing: Aborted
tcpdump: pcap_loop: TMM side closing: Aborted

Conditions:
Capturing the packets on tmm interfaces.

Impact:
Unable to capture the packets on specific tmm interfaces.

Workaround:
There are two possible workarounds:

-- Start tcpdump on the tmm that actually owns the interface using the TCPDUMP_ADDR command; for example, using blade1 for 1/0.16, run the command:

TCPDUMP_ADDR=127.1.1.16 tcpdump -w testcap.pcap -s 0 -i 1/0.16


-- Send the TCPDUMP_ADDR command to a specific tmm, which could work from any blade (127.20.<slot>.<tmmnumber+1> (e.g. 127.20.1.1 == slot1/tmm0, 127.20.2.16 == slot2/tmm15):

TCPDUMP_ADDR=127.20.1.16 tcpdump -w testcap.pcap -s 0 -i 1/0.16


922005-2 : Stats on a certain counter for web-acceleration profile may show excessive value

Component: Local Traffic Manager

Symptoms:
When the BIG-IP system is configured to use the RAM Cache feature, a corresponding profile may report an excessively large value for the cache_misses_all counter under certain conditions.

Conditions:
-- The BIG-IP system has a virtual server with web-acceleration profile without an application (RAM Cache feature).
-- The virtual receives uncacheable requests which are interrupted by a client or are not served by a server.

Impact:
A value for cache_misses_all incurs an arithmetic overflow, and shows an excessive number comparable with 1.8e19. The issue has no functional impact; the system operates as normal.

Workaround:
None.


921993-2 : LTM policy with a 'contains' operator does not work as expected when using an external data group.

Component: Local Traffic Manager

Symptoms:
If a combination of other operators and the 'contains' operator are used in LTM Policy, searches might fail if the hashing-based operators have not populated the target entries.

Conditions:
-- LTM policy with 'contains' operator.
-- Use of external datagroups.

Impact:
LTM policy might not work as expected with external data groups.

Workaround:
Use either of the following workarounds:

-- If applicable, change the 'contains' operator to 'starts_with' in the policy.

-- Change the policy into an iRule (executing '[class get <datagroup]' )


921881-1 : Use of IPFIX log destination can result in increased CPU utilization

Component: Local Traffic Manager

Symptoms:
-- Increased baseline CPU.

- The memory_usage_stats table shows a continuous increase in mds_* rows.

Conditions:
Configure IPFIX log destination and make regular changes to the associated configuration.

Impact:
Increased baseline CPU may result in exhaustion of CPU resources.

Workaround:
Limiting changes to associated configuration can slow the effects of this issue.


921541-2 : When certain sized payloads are gzipped, the resulting payload is chunked, incorrect, and is never delivered to the client due to missing end of chunk marker.

Component: Local Traffic Manager

Symptoms:
The HTTP session initiated by curl hangs.

Conditions:
-- The problem occurs when the file to be compressed meets the following criteria:
-- The following platforms with Intel QAT are affected:
   + B4450N (A114)
   + i4000 (C115)
   + i10000 (C116/C127)
   + i7000 (C118)
   + i5000 (C119)
   + i11000 (C123)
   + i11000 (C124)
   + i15000 (D116)
-- File size to be compressed is less than compression.qat.dispatchsize.
-- File size to be compressed is one of specific numbers from this list: 65535, 32768, 16384, 8192, 4096.

Impact:
Connection hangs, times out, and resets.

Workaround:
Use software compression.


921477-1 : Health monitors may fail when the HTTP RFC Compliance option is enabled in a dual BIG-IP setup.

Component: Local Traffic Manager

Symptoms:
With the HTTP RFC enforcement profile option enabled, incoming health monitor requests without an HTTP version in the request line (HTTP/0.9) may fail to produce the correct result for dual BIG-IP configurations. This can result in incoming health monitor traffic being incorrectly blocked when traveling through a virtual server. These health monitors will be unable to provide the correct availability of the intended resource. The default HTTP and HTTPS monitors as well as any custom monitors with a missing HTTP version in their requests could see this issue.

Conditions:
A dual BIG-IP configuration may provisioned with the following considerations.

-- One or more BIG-IP systems are in the network path for monitor traffic.

-- The first BIG-IP system uses a health monitor that initiates a health check request (without an HTTP version) in the request line (HTTP/0.9) against a second BIG-IP system.

-- The second (downstream) BIG-IP system has a virtual server that is the endpoint for the monitor. The virtual server is configured with an HTTP profile with the HTTP RFC Compliance profile option selected.

Impact:
Rather than receiving the correct health check result, the original BIG-IP system can fail to report whether the second BIG-IP is available.

Workaround:
You can use http_head_f5 monitor to perform health checks.


921441-3 : MR_INGRESS iRules that change diameter messages corrupt diam_msg

Component: Service Provider

Symptoms:
-- 'DIAMETER::host origin' command may not be set correctly.

There are errors in ltm/log:
err tmm[18562]: 014c0001:3: DIAMETER: hud_diam_handle error: Not found

Conditions:
-- Virtual server is configured with a diameter profile enabled with an ingress iRule, for example:

ltm rule Diameter - iRule {
  when MR_INGRESS {
    DIAMETER:: host origin "hostname.realm.example"
  }
}

-- Traffic arrives containing CER and ULR messages.

Impact:
Using the iRule to change the host origin corrupts the diameter message.

Workaround:
None.


921369-3 : Signature verification for logs fails if the log files are modified during log rotation

Component: TMOS

Symptoms:
Rotated log files that are modified immediately after log rotation and before signature generation can cause signature verification failure.

Conditions:
-- Log integrity feature is enabled.
-- A log rotation event occurs

Impact:
Signature verification may fail on rotated log files.


921149-4 : After applying static bandwidth controller on a virtual server, any changes to the virtual server disassociates the BWC policy

Component: TMOS

Symptoms:
All Bandwidth Controller (BWC) stats are 0 (zero) even though traffic is passing.

Conditions:
-- A BWC policy is attached to a virtual server.
-- The virtual server with the attached BWC policy is modified.

Impact:
The system disassociates the BWC policy from the virtual server. Traffic is no longer throttled according to the policy rules.

Workaround:
To reattach the policy, detach the Bandwidth Controller policy from the virtual server, and then reapply it.


921121-5 : Tmm crash with iRule and a PEM Policy with BWC Enabled

Component: TMOS

Symptoms:
Tmm crashes while passing traffic through PEM.

Conditions:
-- PEM policy with bandwidth controller.
-- iRule makes a traffic decision based on certain unique PEM sessions.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


921065-2 : BIG-IP systems not responding to DPD requests from initiator after failover

Component: TMOS

Symptoms:
After failover, the active BIG-IP system fails to respond to DPD requests from some of its eNB neighbors, which results in deletion of IKE tunnel peer as well as the BIG-IP system.

Conditions:
-- The BIG-IP is configured with more than 300 IKE/IPsec tunnels.
-- The BIG-IP system fails over.

Impact:
Since BIG-IP systems do not respond to DPD requests, eNB deletes the IKE tunnel after a few retries.

Workaround:
None.


920817-7 : DNS Resource Records can be lost in certain circumstances

Component: Global Traffic Manager (DNS)

Symptoms:
DNS Zone syncing is missing Resource Records.

Conditions:
This occurs when a large number of configuration changes, including Wide IP changes, are made simultaneously on multiple GTM/DNS devices in a sync group.

Impact:
DNS Resource Records can be missing from the BIND DNS database.

The impact of this is that if GSLB Load Balancing falls back to BIND, the DNS Resource Records may not be present.

Workaround:
Restrict configuration (Wide IP) changes to one GTM/DNS device in a device group.

Note: It is also possible to turn off Zone Syncing. GTM/DNS configuration is still synced, but the you lose the ability to sync non-Wide IP changes to the BIND DB. If you do not utilize ZoneRunner to add additional non-Wide IP records, this is a problem only when GSLB resorts to Fallback to BIND. This can be mitigated with DNSX and DNS (off device) for non Wide IP Resource Records.


920789-1 : UDP commands in iRules executed during FLOW_INIT event fail

Component: Local Traffic Manager

Symptoms:
UDP commands in iRules executed during FLOW_INIT event fail.

Conditions:
An iRule that contains UDP commands is executed on the FLOW_INIT event.

Impact:
UDP commands in iRules executed during FLOW_INIT event fail.

Workaround:
None.


920761-1 : Changing a virtual server type in the GUI may change some options; changing back to the original type does not restore original values

Component: TMOS

Symptoms:
In the GUI if you change a virtual server from one type to another, there may be changes automatically applied to some of the settings. If you change the type back to its original value, those changes remain, and are saved when you click Update.

Conditions:
-- Modifying a virtual server from one type to another, and then changing it back to the original type.
-- Clicking Update.

Impact:
Unexpected configuration changes, which can lead to unexpected behavior of the BIG-IP system.

Workaround:
To prevent unwanted changes, when you change a virtual server's type and then change it back within the same session, click Cancel instead of Update.


920517-1 : Rate Shaping Rate Class 'Queue Method' and 'Drop Policy' defaults are incorrect in the GUI

Component: TMOS

Symptoms:
When creating a Rate Shaping Rate Class in the GUI, the default values for 'Queue Method' and 'Drop Policy' are not correct.

Conditions:
-- Creating a Rate Shaping Rate Class in the GUI.
-- Leaving 'Queue Method' and 'Drop Policy' settings as their defaults.

Impact:
Unexpected values in the configuration: 'Queue Method' is 'sfq' and 'Drop Policy' is 'tail'.

Workaround:
You can use either of the following workarounds:

-- Manually set the 'Queue Method' and 'Drop Policy' when creating a Rate Shaping Rate Class object. These settings are available in the 'Advanced' view of the 'General Properties' section. 'Queue Method' should be 'pfifo' and 'Drop Policy' should be 'fred'.

-- Use TMSH to create Rate Shaping Rate Class objects.


920361-1 : Standby device name sent in Traffic Statistics syslog/Splunk messages

Component: Advanced Firewall Manager

Symptoms:
'Traffic Statistics' syslog/Splunk messages are sent with the hostname of the standby device.

Conditions:
When a virtual server is configured with a security logging profile enabled for DoS Protection logging.

Impact:
'Traffic Statistics' syslog/Splunk messages show the wrong hostname. It should show the active device hostname.

Workaround:
None.


920205-3 : Rate shaping might suppress TCP RST

Component: Local Traffic Manager

Symptoms:
When rate shaping is configured, the system might suppress TCP RSTs issued by itself.

Conditions:
Rate shaping is configured.

Impact:
The rate-shaping instance drops TCP RSTs; the endpoint is not informed about the ungraceful shutdown.

Workaround:
Do not use rate-shaping.


920197-4 : Brute force mitigation can stop mitigating without a notification

Component: Application Security Manager

Symptoms:
A brute force attack coming from an entity (such as an IP address, etc.) may be stopped prematurely.

Conditions:
-- Many brute force attacks are happening at once, coming from many sources.
-- Distributed attack is not detected (due to configuration).

Impact:
At some point, an entity might not be mitigated due to the sheer number of mitigated entities. When this occurs, there is no notification.

Workaround:
None.


919861-2 : Tunnel Static Forwarding Table does not show entries per page

Component: TMOS

Symptoms:
On the Network :: Tunnels page of the GUI, if the Tunnel Static Forwarding Table contains more than one page of data, you are unable to advance past the first page.

Conditions:
Tunnel Static Forwarding Table contains a large number of configured tunnels.

Impact:
The content displayed on screen and does not conform to the system preference for Records Per Screen.

Workaround:
None.


919401-1 : Disallow adding Request Adapt Profiles and Response Adapt Profiles to virtual servers in TMSH when ICAP is not licensed

Component: TMOS

Symptoms:
If ICAP is not licensed, the system does not prevent you from adding Request Adapt Profiles and Response Adapt Profiles to virtual servers in the CLI. If these profiles are configured, traffic does not pass through the virtual server and the following error is reported in /var/log/ltm:

crit tmm[3328]: 01010022:2: ICAP feature not licensed

Conditions:
-- ICAP is not licensed.
-- At least one virtual server has been configured with a Request Adapt Profile and/or a Response Adapt Profile.

Impact:
Traffic does not pass through the affected virtual servers.

Workaround:
Remove any configured Request Adapt Profiles and Response Adapt Profiles from virtual servers.


919317-6 : NSM consumes 100% CPU processing nexthops for recursive ECMP routes

Component: TMOS

Symptoms:
The NSM process might enter a state where it gets stuck at 100% CPU usage.

Conditions:
ECMP routes reachable via recursive nexthops.

Impact:
NSM is stuck at 100% CPU usage.

Workaround:
Avoid using EMCP routes reachable via recursive nexthops.


919185-1 : Request adapt and response adapt profile options should not be available in the GUI when ICAP is not licensed

Component: TMOS

Symptoms:
The Request Adapt Profile and Response Adapt Profile settings are visible when creating or editing a virtual server in the GUI on systems that do not have ICAP licensed. If these profiles are configured, traffic does not pass through the virtual server and the following error is reported in /var/log/ltm:

crit tmm[3328]: 01010022:2: ICAP feature not licensed

Conditions:
-- ICAP is not licensed.
-- At least one virtual server has been configured with a Request Adapt Profile and/or a Response Adapt Profile.

Impact:
Traffic does not pass through the affected virtual servers.

Workaround:
Remove any configured Request Adapt Profiles and Response Adapt Profiles from virtual servers.


918905-1 : PCCD restart loop when using more than 256 FQDN entries in Firewall Rules

Component: Advanced Firewall Manager

Symptoms:
PCCD enters a restart loop, until the configuration is changed such that 256 or fewer FQDN entries are in use.

Conditions:
Greater than 256 FQDN entries are in use in Firewall Rules.

Impact:
PCCD restart loop. PCCD is not functional until there are 256 or fewer entries.

Workaround:
Use 256 or fewer FQDN entries in Firewall Rules.

To aid in the removal of extra rules when using tmsh, you can prevent PCCD restart messages from flooding the console:
1. Stop PCCD to halt the restart messages:
bigstart stop pccd
2. Modify the configuration.
3. Bring PCCD back up:
bigstart start pccd


918693-5 : Wide IP alias validation error during sync or config load

Component: Global Traffic Manager (DNS)

Symptoms:
DB validation exception occurs during sync or config load:

01070734:3: Configuration error: DB validation exception, unique constraint violation on table (gtm_wideip_alias) object ID (1 /Common/alias.test.com www.test.com). A duplicate value was received for a non-primary key unique index field. DB exception text (Cannot update_indexes/checkpoint DB object, class:gtm_wideip_alias status:13)
Unexpected Error: Loading configuration process failed.

Conditions:
-- Wide IP has an alias associated with it.
-- Sync or load the config.

Impact:
You are unable to load config or full sync from peer GNS/GTM.

Workaround:
Follow this procedure:
1. Delete the wide IP alias on the destination device.
2. Try the sync or load config operation again.


918597-6 : Under certain conditions, deleting a topology record can result in a crash.

Component: Global Traffic Manager (DNS)

Symptoms:
During a topology load balancing decision, TMM can crash.

Conditions:
-- Topology records are deleted.
-- A load balancing decision using topology load balancing occurs.

Impact:
On very rare occasions, TMM can crash. Traffic disrupted while tmm restarts.

Workaround:
None.


918409-1 : BIG-IP i15600 / i15800 does not monitor all tmm processes for heartbeat failures

Component: TMOS

Symptoms:
If a BIG-IP device has more than 24 tmm instances and one of the tmm processes above the 24th cpu loops (e.g., in response to an internal issue), it loops indefinitely.

Conditions:
-- BIG-IP i15600 / i15800 platforms.
-- Another issue occurs that that causes a tmm process greater than the 24th tmm process to loop.

Impact:
Traffic disrupted on the tmm process that is looping indefinitely.

Workaround:
1. Manually change /defaults/daemon.conf to include the appropriate tmm number and respective heartbeat action if the supported tmm is not listed.

Note: The change does not persist across software installs.

    a. mount -o remount,rw /usr
    b. Edit /defaults/daemon.conf and put these contents at the top of the file:

sys daemon-ha tmm24 {
    description none
    heartbeat enabled
    heartbeat-action go-offline-downlinks-restart
    running enabled
    running-timeout 2
}
sys daemon-ha tmm25 {
    description none
    heartbeat enabled
    heartbeat-action go-offline-downlinks-restart
    running enabled
    running-timeout 2
}
sys daemon-ha tmm26 {
    description none
    heartbeat enabled
    heartbeat-action go-offline-downlinks-restart
    running enabled
    running-timeout 2
}
sys daemon-ha tmm27 {
    description none
    heartbeat enabled
    heartbeat-action go-offline-downlinks-restart
    running enabled
    running-timeout 2
}

    c. mount -o remount,ro /usr

2. After performing the edit, load the changes into the running configuration via 'tmsh load sys config partitions all'.
3. Verify that sod is now correctly monitoring tmm instances above tmm24 using a command such as:

    tmsh show sys ha-status all-properties | grep "daemon-heartbeat" | grep tmm


918277-1 : Slow Ramp does not take into account pool members' ratio weights

Component: Local Traffic Manager

Symptoms:
When a pool member is within its slow-ramp period, and is a member of a pool that uses a static-ratio-based load balancing algorithm, its ratio weight is not taken into account when balancing connections to it. If it has a ratio that is higher than other pool members, this can result in a sudden influx of connections once the pool member exits the slow-ramp period.

Conditions:
-- Pool with a non-zero slow-ramp timeout and a static-ratio-based load balancing algorithm.
-- Pool members within the pool have different ratio weights.
-- At least one pool member is inside its slow-ramp period.

Impact:
The pool member could still be overwhelmed despite the attempt to slow-ramp connections to it.

Workaround:
None.


918097-4 : Cookies set in the URI on Safari

Component: Application Security Manager

Symptoms:
When Bot Defense performs a 307 Redirect, the cookie is set on the URL if Bot Defense detects the Safari browser.

Conditions:
-- Bot Defense profile is attached to virtual server.
-- 'Browser Verification' set to 'Verify Before Access' or 'Verify After Access'.
-- 'Cross Domain Requests' set to 'Validate Upon Request'.
-- Surfing on Safari browser to a related domain.

Impact:
A cookie is set on the URL.

Workaround:
None.


917637-4 : Tmm crash with ICAP filter

Component: Service Provider

Symptoms:
Tmm crashes while passing traffic.

Conditions:
-- Per-request policies configured.
-- ICAP is configured.

This is rare condition that occurs intermittently.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


916485-3 : Tmsh install sys crypto key (SafeNet) command creates a duplicate mcp object

Component: Local Traffic Manager

Symptoms:
Running 'tmsh install sys crypto key' command for SafeNet keys creates a new mcp object with the keyname as the label name in HSM, and with the duplicate key-id.

Conditions:
This happens when trying to install the key using the key-label as the argument.

Impact:
Even after deleting the tmsh key (tmsh delete sys crypto key), the BIG-IP system can still pass traffic because there's a duplicate key pointing to the same key in the HSM.

Workaround:
None.


915969-2 : Truncated QUIC connection close reason

Component: Local Traffic Manager

Symptoms:
The connection close reason in QUIC is limited to 5 bytes prior to the path being validated. This makes it difficult to debug early connection failures.

Conditions:
A connection close is sent in QUIC before the path is validated.

Impact:
Connection close reason is limited to 5 bytes before the path is validated.

Workaround:
None


915829-3 : Particular Users unable to login with LDAP Authentication Provider

Component: TMOS

Symptoms:
With LDAP as authentication provider, some administrative users are unable to login to BIG-IP.

Conditions:
-- LDAP remote authentication.
-- Certain users, whose characteristics have not been identified.

Impact:
Certain client users cannot login to administer the BIG-IP system.

Workaround:
None.


915825-1 : Configuration error caused by Drafts folder in a deleted custom partition while upgrading.

Component: TMOS

Symptoms:
A configuration error occurs during upgrade due to custom partition-associated Draft folder, which exists in configuration file after deleting a custom partition.

Configuration error: Can't associate folder (/User/Drafts) folder does not exist.

Conditions:
This occurs in the following scenario:

1. Create Partition.
2. Create Policy under that partition.
3. Delete Policy.
4. Delete Partition.
5. Upgrade.

Impact:
Upgrade fails when a Drafts folder exists under the custom partition folder, if the custom partition is deleted.

Workaround:
Manually remove the stale folders in the configuration file, or use a script to remove them.


915773-3 : Restart of TMM after stale interface reference

Component: Local Traffic Manager

Symptoms:
An assert is reported in the logs:
panic: ../net/ifc.c:975: Assertion "ifc ref valid" failed.

Conditions:
The conditions under which this occurs are unknown.

Impact:
Tmm crashes and restarts. Traffic disrupted while tmm restarts.

Workaround:
None.


915557-1 : The pool statistics GUI page fails (General database error retrieving information.) when filtering on pool status.

Component: TMOS

Symptoms:
When using the pool statistics GUI page, the page stops displaying and the GUI shows the following error:

General database error retrieving information.

Conditions:
You attempt to apply a Status filter (e.g., Available) to display only some pools.

Impact:
The Status filter is not usable. Additionally, the page continues not to display even after you navigate away from the page and later return to it.

Workaround:
There is no workaround to prevent the issue, but if you wish to access that page again (and not use the Status filter), you can do so by clearing your browser's cache.


915493-5 : imish command hangs when ospfd is enabled

Component: TMOS

Symptoms:
Running the imish command hangs when ospfd is enabled.

Conditions:
-- Dynamic routing enabled.
-- The ospfd protocol is enabled.
-- Running the imish command.

Impact:
The imish operation hangs.

Workaround:
Restart the ospfd daemon.


915473-3 : Accessing Dashboard page with AVR provisioned causes continuous audit logs

Component: TMOS

Symptoms:
Navigating to Statistics :: Dashboard in the GUI with AVR or APM provisioned causes continuous audit logging and restjavad logs.

Conditions:
-- AVR provisioned
-- An administrator navigates to Statistics :: Dashboard.

Impact:
The continuous extra logs might lead to confusion and may not be helpful.

Workaround:
None.


915221-5 : DoS unconditionally logs MCP messages to /var/tmp/mcpd.out

Component: Advanced Firewall Manager

Symptoms:
Excessive and large DoS debug messages associated with tmsh commands and stat queries are logged to /var/tmp/mcpd.out which is not log-rotated.

Conditions:
-- AFM is provisioned.
-- DoS queries executed via tmsh.

Impact:
Disk space is consumed on the filesystem for /var/tmp, which can eventually lead to follow-on failures when the disk fills up.

Workaround:
Delete or purge /var/tmp/mcpd.out.


915141-1 : Availability status of virtual server remains 'available' even after associated pool's availability becomes 'unknown'

Component: TMOS

Symptoms:
Availability status of virtual server can be left 'available' even if the corresponding pool's availability becomes 'unknown'.

Conditions:
- Pool member is configured as an FQDN node.
- You set monitor to 'none' with the pool.

Impact:
Inconsistent availability status of pool and virtual server.

Workaround:
Set the FQDN node to 'force offline', and then 'enable'. This triggers virtual server's status updates and syncs to pool.


915133-2 : Single Page Application can break the page, when hooking is done by the end server application.

Component: Application Security Manager

Symptoms:
When the end server application hooks some of the XHR callback functions (onload, onreadystate, send, open..), and a Single Page Application is used, the application page may malfunction.

Conditions:
This may occur when a server application hooks some XHR callbacks, and one of the following:

-- Bot Defense Profile with 'Single Page Application' enabled and attached to the virtual server.

-- ASM Policy with 'Single Page Application' enabled and a JS feature is attached to the virtual server.

-- DoS Profile with Application Security and 'Single Page Application' enabled and is attached to the virtual server.

Impact:
Web page does not render properly. It might result in a blank page, missing functionality, etc.

Workaround:
Run the command:
tmsh modify sys db dosl7.parse_html_inject_tags value "after,body"


915005-2 : AVR core files have unclear names

Component: Application Visibility and Reporting

Symptoms:
If avrd fails a core file created in this case is named accordung to the thread name and has no indication that it belongs to avr, for example: SENDER_HTTPS.bld0.0.9.core.gz

Conditions:
Avrd fails with a core

Impact:
It is inconvenient for identifying the process that caused the core.


914645-4 : Unable to apply LTM policies to virtual servers after running 'mount -a'

Component: TMOS

Symptoms:
After attempting to assign an LTM policy to a virtual server, you may get an error in the GUI:

010716d8:3: Compilation of ltm policies for virtual server /Common/VS failed; Couldn't publish shared memory segment.

You may also see this logged in /var/log/ltm:

 err mcpd[6905]: 010716d5:3: Failed to publish LOIPC object for (loipc_VS.1589526000.777142413). Call to (shm_open) failed with errno (13) errstr (Permission denied).

Conditions:
-- Run the command:
mount -a
-- Attempt to assign an LTM policy to a virtual server.

Impact:
Having /dev/shm mounted twice affects every process on the BIG-IP system that use that directory for shared memory.

The duplicated mount can result an inability to apply LTM policies, but the impact is not limited to that issue.

Workaround:
Run the following command to enable assigning an LTM policy to a virtual server:

umount -l /dev/shm

Unmounting might not resolve every issue that is result of /dev/shm being mounted more then once. So it's best if mount -a is not run at all.


914589-1 : VLAN Failsafe timeout is not always respected

Component: Local Traffic Manager

Symptoms:
VLAN Failsafe timeout is triggered later than its configured interval.

Conditions:
-- Rarely happen on first failover. More commonly occurs on 3rd/4th failover.
-- Specific conditions that cause this issue are not known.

Impact:
VLAN Failsafe timeout might be triggered later than it is configured.

The exact impact varies based on the configuration and traffic activity.

Workaround:
Use another form of automatic failover if needed (gateway failsafe, ha-groups, etc.).


914309-4 : TMM crash seen with FTP and Classification profiles

Component: Local Traffic Manager

Symptoms:
TMM might core and restart when FTP traffic is being proxied by a BIG-IP device.

Conditions:
-- Both FTP and Classification profiles are applied to a virtual server.
-- The FTP profile has inherit-parent-profile enabled.

Impact:
-- TMM crashes and restarts
-- Failover, loss of service during restart.
-- Traffic disrupted while tmm restarts.

Workaround:
None.


914293-4 : TMM SIGSEGV and crash

Component: Anomaly Detection Services

Symptoms:
Tmm crash when using iRule to reject connections when Behavioral DoS is enabled.

Conditions:
This can occur due to an interaction between a Behavioral DoS policy and an iRule designed to potentially drop some of the connections.

Impact:
With heavy traffic, the tmm process might crash. Traffic disrupted while tmm restarts.

Workaround:
Do not use iRules to reject connections that are bound to a virtual server with a Behavioral DoS policy attached.


914277-1 : [ASM - AWS] - Auto Scaling BIG-IP systems overwrite ASU

Component: Application Security Manager

Symptoms:
When a Cloud Auto Scaling deployment is set up using F5's Auto Scale Template, and ASM Live Update is configured with Automatic Download enabled, Live Update configuration may be overwritten during a scale out event when a new host joins the sync cluster. This is caused by a config sync from the new device to the master device, before the master has a chance to sync the configuration to the new device, causing the configuration in the master device to be overwritten.

Conditions:
-- Using F5's Auto Scaling template.
-- Auto Scale script is configured with --block-sync (which is the default).
-- ASM Live Update is configured with Automatic Download enabled.
-- A scale out event occurs.
-- New ASU is automatically downloaded by Live Update at the new host.

Impact:
Live Update configuration of all devices in the Auto Scale group is overwritten.

Workaround:
Disable ASM Live Update Automatic Download.

This can be done by disabling the liveupdate.autodownload DB variable using the onboard.js script, and adding '-d liveupdate.autodownload:disable'.

For example:
/usr/bin/f5-rest-node /config/cloud/aws/node_modules/@f5devcentral/f5-cloud-libs/scripts/onboard.js --log-level silly --signal ONBOARD_DONE -o /var/log/cloud/aws/onboard.log --host localhost --port 8443 -d tm.tcpudptxchecksum:software-only -d liveupdate.autodownload:disable --ping

-d tm.tcpudptxchecksum:software-only -d liveupdate.autodownload:disable

In order to still have automatic updates for the group, the db variable can be enabled for the master device. Then this setting will be applied on every new host after joining the group and receiving the initial sync from the master.


914061-1 : BIG-IP may reject a POST request if it comes first and exceeds the initial window size

Component: Local Traffic Manager

Symptoms:
HTTP/2 protocol allows a negative flow-control window on initial stage of communication while first 65,535 bytes of payload are delivered from a peer. BIG-IP may break this requirement.

Conditions:
-- BIG-IP has a virtual server with http2 profile.
-- A configured receive window size in the http2 profile is below 64K (default 32K).
-- A peer sends POST request with payload exceeding initial receive window size over HTTP/2 connection.

Impact:
BIG-IP denies the POST request and sends RST_STREAM.


913917-1 : Unable to save UCS

Component: Global Traffic Manager (DNS)

Symptoms:
You are unable to create a backup UCS.

You see a warning in /var/log/restjavad.0.log:

[WARNING][8100/tm/shared/sys/backup/306b4630-aa74-4a3d-af70-0d49bdd1d89e/worker UcsBackupTaskWorker] Failure with backup process 306b4630-aa74-4a3d-af70-0d49bdd1d89e.
This is followed by a list of some files in /var/named/config/namedb/.

Conditions:
Named has some Slave zones configured and is going through frequent zone transfer.

Impact:
You are unable to create a UCS file.

Workaround:
Stop named zone transfer while doing UCS backup.


913849-2 : Syslog-ng periodically logs nothing for 20 seconds

Component: TMOS

Symptoms:
Once per minute, syslog-ng logs nothing for 20 seconds.

Conditions:
-- A remote syslog server is specified by hostname, forcing syslog-ng to resolve it.
-- the DNS resolution times out (for example, if the DNS server is unreachable)

Impact:
When using DNS names to specify remote syslog destinations and DNS is unreachable, syslog-ng re-attempts to resolve the name every 60 seconds. This resolution has a 20 seconds timeout, and blocks the syslog process from writing logs to disk during that time.

Note that the logs are buffered, not lost, and will still be written to disk (with the correct timestamps) once the DNS query times out.

Workaround:
None.


913829-5 : i15000, i15800, i5000, i7000, i10000, i11000 and B4450 blades may lose efficiency when source ports form an arithmetic sequence

Component: TMOS

Symptoms:
Traffic imbalance between tmm threads. You might see the traffic imbalance by running the following command:
tmsh show sys tmm-traffic

Conditions:
Source ports used to connect to i15000, i15800, i5000, i7000, i10000, i11000 and B4450 blades form an arithmetic sequence.

For example, some client devices always use even source port numbers for ephemeral connections they initiate. This means the 'stride' of the ports selected is '2'. Because a sorted list of the ports yields a list like 2, 4, 6, 8... 32002, 32004. It is 'striding' over the odd ports; thus, a port stride of 2.

Impact:
Traffic imbalance may result in tmm threads on different CPU cores having imbalanced workloads. While this can sometimes impact on performance, an overloaded tmm thread can usually redistribute load to less loaded threads in a way that does not impact performance. However the loads on the CPU cores will appear imbalanced still.

Workaround:
Where possible, configure devices to draw from the largest possible pool of source ports when connecting via a BIG-IP system.


913761-1 : Security - Options section in navigation menu is visible for only Administrator users

Component: Application Security Manager

Symptoms:
The Security - Options section in the left navigation menu is visible for only for user accounts configured with the Administrator role.

Conditions:
You logged in as a user configured with a role other than Administrator.

Impact:
No direct access to many settings that are available only for user account configured with the Administrator role.

Workaround:
Direct links to the pages work for those with the appropriate roles.


913729-6 : Support for DNSSEC Lookaside Validation (DLV) has been removed.

Component: Global Traffic Manager (DNS)

Symptoms:
Following the deprecation of DNSSEC lookaside validation (DLV) by the Internet Engineering Task Force (IETF), support for this feature has been removed from the product.

Conditions:
Attempting to use DLV.

Impact:
Cannot use DLV.

Workaround:
None. DLV is no longer supported.


913713-1 : Rebooting a blade causes MCPd to core as it rejoins the cluster

Component: TMOS

Symptoms:
Tmm and mcpd cores for slot2

Conditions:
On the standby chassis, reboot the primary blade and wait for it to rejoin the cluster. Once it does, mcpd will core.

Impact:
Traffic disrupted while tmm and mcpd mcpd restarts.

Workaround:
N/A


913573-3 : Unable to complete REST API PUT request for 'tm/ltm/data-group/internal' endpoint.

Component: TMOS

Symptoms:
When REST API PUT request is call to modify LTM data-group internal without 'type' field in body-content, it fails intermittently with a 400 error.

--{"code":400,"message":"invalid property value \"type\":\"\"","errorStack":[],"apiError":26214401}

The 'type' field is not getting populated with default value and is set to null string "" instead.

Conditions:
-- PUT REST API request used to modify LTM data-group internal.
-- Type field is not specified in the body-content.

Impact:
Unable to update the configuration object (LTM data-group internal) with REST API PUT.

Workaround:
Include 'type' field inside PUT request body content for the operation to succeed.

Example Curl Command:
-- curl -isku <username>:<password> -H "Content-Type: application/json" -X PUT -d '{"records":[{"name":"1.1.1.1"}, {"name":"1.1.1.2"}], "type":"ip"}' https://localhost/mgmt/tm/ltm/data-group/internal/~Common~<Name>


913453-6 : URL Categorization: wr_urldbd cores while processing urlcat-query

Component: Traffic Classification Engine

Symptoms:
The webroot daemon (wr_urldbd) cores.

Conditions:
This can occur while passing traffic when webroot is enabled.

Impact:
The wr_urldbd daemon cores. URL Categorization functionality may not work as expected.

Workaround:
None.


913385-2 : TMM generates core while deleting iFiles

Component: Local Traffic Manager

Symptoms:
While deleting iFiles, TMM might crash and generates a core.

Conditions:
-- There is any ifile command in an iRule where you are giving a list object to the file name argument instead of to a string object, for example:

The 2nd line returns a list object, and the 3rd line is giving it to ifile command:

set ifile_name tcl.1
set ifile_name [lsearch -glob -inline [ifile listall] "*$ifile_name"]
ifile get $ifile_name

-- A request is processed by the iRule.
-- Attempt to delete the file in which the issue occurred.

Impact:
TMM crashes and restarts, triggering failover in high availability (HA) configurations. Traffic disruption while TMM restarts on a standalone configuration.

Workaround:
Ensure that the iRule gives a string object to ifile commands. Here is a sample iRule that implements the workaround:

set ifile_name tcl.1
set ifile_name [lsearch -glob -inline [ifile listall] "*$ifile_name"]
ifile get [format "%s" $ifile_name]


913085-2 : Avrd core when avrd process is stopped or restarted

Component: Application Visibility and Reporting

Symptoms:
When the avrd process is stopped or restarted, it fails with core before the exit. A core file with the name starting with SENDER_HTTPS (for example, SENDER_HTTPS.bld0.0.9.core.gz) can be found in /shared/cores/ directory.

Conditions:
A BIG-IP system is registered on BIG-IQ and has established an HTTPS connection with BIG-IQ for sending stats data.

Impact:
Avrd cores while exiting. There is no impact on BIG-IP system functionality.

Workaround:
None.


912945-1 : A virtual server with multiple client SSL profiles, the profile with CN or SAN of the cert matching the SNI is not selected if cert is ECDSA signed

Component: Local Traffic Manager

Symptoms:
In a virtual configured with multiple client SSL profiles, the profile with ECDSA signed cert is not selected even though its CN/SAN matching the SNI extension of ClientHello.

Conditions:
-- A virtual server with multiple client SSL profiles.
-- The SNI of ClientHello does not match the 'server name' of any profile.
-- The cert in the profile is ECDSA signed and its CN/SAN matches SNI extension of ClientHello.
-- That profile in is not selected.

Impact:
The incorrect client SSL profile is selected.

Workaround:
None.


912761-1 : Link throughput statistics are different

Component: Global Traffic Manager (DNS)

Symptoms:
Different link throughput statistics are seen on GTM/DNS systems that are connected by full-mesh iQuery.

Conditions:
-- The same link is used on different BIG-IP addresses as a pool member in the default gateway pool.
-- A forwarding virtual server is used.

Impact:
Each GTM/DNS server might get different link throughput for the same link, and therefore make less-than-optimal decisions.

Workaround:
Do not use the same uplink for different BIG-IP devices.


912517-1 : MySQL monitor marks pool member down if 'send' is configured but no 'receive' strings are configured

Component: Local Traffic Manager

Symptoms:
If an LTM database monitor type (MySQL, MSSQL, Oracle, or PostgreSQL database monitor type) is configured with a 'send' string but with no 'receive' string to issue a user-specified database query, pool members using this monitor are marked DOWN, even though a connection to the configured database completed successfully.

Conditions:
-- An LTM pool or pool members is configured to use an LTM database (MySQL, MSSQL, Oracle or PostgreSQL) monitor type.
-- A 'send' string is configured for the monitor.
-- A 'receive' string is not configured.

Impact:
The database monitor marks the pool member down, even in cases where the pool member is actually pingable.

Workaround:
To work around this issue, configure 'send' and 'recv' strings for the database monitor that will always succeed when successfully connected to the specified database (with the configured username and password, if applicable).


912425-4 : Modification of in-tmm monitors may result in crash

Component: Local Traffic Manager

Symptoms:
TMM crash.

Conditions:
-- Modify in-tmm monitors.
-- Perform configuration sync.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
-- Disable in-tmm monitors.
-- Avoid config syncing to the active device.


912293-4 : Persistence might not work properly on virtual servers that utilize address lists

Component: Local Traffic Manager

Symptoms:
-- Connections to the virtual server might hang.
-- Increased tmm CPU utilization.

Conditions:
-- A virtual server is configured with a traffic-matching-criteria that utilizes a source-address-list and/or destination-address-list.

-- The virtual server utilizes certain persistence one of the following persistence types:
  + Source Address (but not hash-algorithm carp)
  + Destination Address (but not hash-algorithm carp)
  + Universal
  + Cookie (only cookie hash)
  + Host
  + SSL session
  + SIP
  + Hash (but not hash-algorithm carp)

Impact:
-- High tmm CPU utilization.
-- Stalled connections.

Workaround:
Enable match-across-virtuals in the persistence profile.

Note: Enabling match-across-virtuals might might affect the behavior of other virtual servers in the configuration that utilize persistence.


912089-1 : Some roles are missing necessary permission to perform Live Update

Component: Application Security Manager

Symptoms:
Certain roles, such as Resource Administrator and Application Security Operations Administrator, do not have sufficient permission levels to perform Live Update.

Conditions:
-- User with Resource Administrator or Application Security Operations Administrator role assigned.
-- Attempt to perform Live Update.

Impact:
Users with Resource Administrator and Application Security Operations Administrator role cannot perform Live Update.

Workaround:
None.


912001-2 : TMM cores on secondary blades of the Chassis system.

Component: Global Traffic Manager (DNS)

Symptoms:
When using DNS Cache on chassis systems with a forward zone pointing at a self IP for communication with local BIND, the following assert triggers:

tmm_panic (... "../net/loop.c:572: %sIDX set on listener%s") at ../lib/stdio.c:1307

Conditions:
-- Chassis system is used.
-- Secondary TMMs core dump.
-- Primary works as expected.

Impact:
TMMs on secondary blades core dump. Traffic disrupted while tmm restarts.

Workaround:
1) Create another virtual server with a DNS profile to use configured to use the local bind server.
2) Set the forward zones to point to that virtual server instead of the self IP as name servers.


911853-6 : Stream filter chunk-size limits filter to a single match per ingress buffer

Component: Local Traffic Manager

Symptoms:
The chunk-size profile setting of the stream filter limits memory by capping the match string allocated from an ingress buffer to <chunksize> bytes. This implicitly limits the maximum size of the match, potentially resulting in missed matches beyond chunk-size within the same ingress buffer. For more information, see:

https://support.f5.com/csp/article/K39394712

Conditions:
A stream filter is configured with the chunk-size parameter set and ingress data arrives which contains matches beyond the configured chunk-size in the buffer.

Impact:
Potential matches beyond the configured chunk-size will be sent unmodified by the stream filter, potentially resulting in missed matches.

Workaround:
None.


911777-1 : BIG-IP SSL forward proxy might drop connection to servers with revoked certificate status.

Component: Local Traffic Manager

Symptoms:
If the server certificate status is revoked, SSL forward proxy configured with a new server SSL profile might drop the connection.

Conditions:
-- New SSL forward proxy server SSL profile is attached to the virtual server.
-- Revoked-cert-status-response-control is set to the default value (drop).
-- Certificate status service (e.g., CRL/OCSP) is configured on the server SSL profile.

Impact:
BIG-IP client connections are reset.

Workaround:
Change revoked-cert-status-response-control to ignore on the server SSL profile.


911729-3 : Redundant learning suggestion to set a Maximum Length when parameter is already at that value

Component: Application Security Manager

Symptoms:
Policy Builder is issuing a learning suggestion to set a specific maximum length for a parameter when that parameter already has that exact maximum length already configured.

Conditions:
-- Response learning is turned on
-- Response parameter length is less than, but close to, the currently configured maximum length limit.

Impact:
Redundant learning suggestion is issued.

Workaround:
You can either:
-- Ignore the learning suggestion (Click the Ignore button).
-- Turn off Learn from response.


911713-4 : Delay in Network Convergence with RSTP enabled

Component: TMOS

Symptoms:
The BIG-IP system does not to Rapid Spanning Tree Protocol (RSTP) Bridge Protocol Data Units (BPDUs) with only the proposal flag ON (i.e., without the agreement flag ON).

Conditions:
-- Neighbor Switch sends RSTP BPDU with only proposal flag ON.
-- The agreement flag is not ON.

Impact:
Network convergence takes more time than expected.

Workaround:
None.


911585-4 : PEM VE does not send CCRi when receiving multiple subscriber requests in a short interval

Component: Policy Enforcement Manager

Symptoms:
PEM sessions go to a stale state and the Credit Control Request (CCRi) is not sent.

Conditions:
-- PEM is configured and passing normal PEM traffic.
-- Using BIG-IP Virtual Edition (VE)

Impact:
Session is not established.

Workaround:
None.


911241-7 : The iqsyncer utility leaks memory for large bigip_gtm.conf file when log.gtm.level is set to debug

Component: Global Traffic Manager (DNS)

Symptoms:
The iqsyncer utility leaks memory.

Conditions:
-- There is a large bigip_gtm.conf.
-- The log.gtm.level is set to debug.

Impact:
The iqsyncer utility exhausts memory and is killed.

Workaround:
Do not set log.gtm.level equal to or higher than debug.


911041-4 : Suspending iRule FLOW_INIT on a virtual-to-virtual flow leads to a crash

Component: Local Traffic Manager

Symptoms:
An iRule executing on the FLOW_INIT event can suspend. If it does so while connecting to a virtual-to-virtual flow, it can cause a TCP crash, which results in a tmm restart.

Conditions:
An iRule executing on the FLOW_INIT event suspends while connecting to a virtual-to-virtual flow.

Impact:
Tmm crashes. Traffic disrupted while tmm restarts.

Workaround:
Do not include any iRules that suspend processing in FLOW_INIT.


910965-1 : Overflow of Multicast table filling the tmm log

Component: Local Traffic Manager

Symptoms:
Whenever a new multicast entry is added to an already full table, an error is logged to /var/log/tmm

Conditions:
This warning occurs when the multicast table is full

Impact:
When this condition occurs, this can fill the tmm log with these warning messages

Workaround:
None.


910777-2 : Sending ASM report via AWS SES failed duo to wrong content type

Component: Application Visibility and Reporting

Symptoms:
When you attempt to send an ASM report via AWS SES, the message bounces with the following message:
  Could not send e-mails: SMTP Error: data not accepted.; Transaction failed: Expected MIME type, got ;; Error code: 554.

This occurs because the BIG-IP system is sending out the report message with an empty Content-Type in the multipart MIME, which the AWS mail host cannot process.

Conditions:
This is encountered in the following scenario:
1. Set up SMTP and ASM schedule report.
2. Click Send Now, and get the error message in GUI.
3. SSH into the BIG-IP system.
4. Add this line under the following snippet:

[admin@bigip:Active:Standalone] ~ # chmod 644 /var/ts/dms/script/avrexport/avrmail.php
[admin@bigip:Active:Standalone] ~ # vi /var/ts/dms/script/avrexport/avrmail.php

if (!$mail_subject) $mail_subject = "BIG-IP Analytics Report";
if (!$mail_body) $mail_body = "Attached to this e-mail is a BIG-IP Analytics Report issued at $mail_time\n\n";
if (!$mail_from) $mail_from = 'BIG-IP Reporter';
if (!$mail_content_type) $mail_content_type = 'text/html'; <<<< Add this line for add text/html into content type.

[admin@bigip:Active:Standalone] ~ # chmod 444 /var/ts/dms/script/avrexport/avrmail.php

5. Click Send Now again and it works.


Note: To use AWS SES, you must verify your email address first (as a Sender). You can search SES in AWS and verify your email in Email Addresses. AWS sends an email. Click the embedded link after receipt, and then you can use it as the Sender address on the BIG-IP system.

Impact:
Cannot receive ASM reports.


910673-1 : Nethsm-thales-install.sh installation fails with error 'Could not reach Thales HSM'

Component: Local Traffic Manager

Symptoms:
Thales installation script fails with error message.

ERROR: Could not reach Thales HSM "<ip>". Make sure the HSM IP address is correct and that the HSM is accessible to the BIG-IP.

Conditions:
This occurs when the ICMP ping is blocked between the BIG-IP system and netHSM.

Impact:
Thales/nCipher NetHSM client software installation fails.

Workaround:
Unblock ICMP ping between the BIG-IP system and netHSM.


910645-2 : Upgrade error 'Parsing default XML files. Failed to parse xml file'

Component: TMOS

Symptoms:
After upgrading BIG-IP APM, multiple error messages appear in /var/log/ltm:

-- err mcpd[5352]: 010713cf:3: Parsing default XML files. Failed to parse xml file (/var/sam/www/client/customization-source/Common/modern/secure_access_client/default_secure_access_client.xml) because Failed to stat file (/var/sam/www/client/customization-source/Common/modern/secure_access_client/default_secure_access_client.xml) errno(2) strerror(No such file or directory)
-- err mcpd[5352]: 010713cf:3: Parsing default XML files. Failed to parse xml file (/var/sam/www/client/customization-source/Common/modern/resource_app_tunnel/default_resource_app_tunnel.xml) because Failed to stat file (/var/sam/www/client/customization-source/Common/modern/resource_app_tunnel/default_resource_app_tunnel.xml) errno(2) strerror(No such file or directory)

Conditions:
-- APM configuration.
-- Upgrade the BIG-IP system to v15.1.0 or newer.

Impact:
These are benign messages that do not indicate a functional issue. There is no impact; the system works correctly.

The errors occur when the upgraded BIG-IP APM configuration attempts to load resource definitions for the modern customization schema. However, by design, the modern customization schema does not define resources. Only the standard customization schema defines resources found under '/var/sam/www/client/customization-source/Common/standard/'.

Workaround:
None.


910417-1 : TMM core may be seen when reattaching a vector to a DoS profile

Component: Advanced Firewall Manager

Symptoms:
TMM core resulting in potential loss of service.

Conditions:
Attaching and deleting the vector to a DoS profile multiple times while the traffic is ongoing.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


910273-1 : SSL Certificate version always displays as '1' in the GUI

Component: Local Traffic Manager

Symptoms:
In GUI an SSL certificate's version is displayed as '1', even if its version is higher than 1.

Conditions:
-- Viewing an SSL certificate in the GUI.
-- The SSL certificate's version is higher than 1.

Impact:
SSL certificate's version is displayed as '1'. There is no functional impact.

Workaround:
None.


910213-1 : LB::down iRule command is ineffective, and can lead to inconsistent pool member status

Component: Local Traffic Manager

Symptoms:
Use of the LB::down command in an iRule may not have the desired effect.

Specifically, the pool member is marked down within the tmm thread executing the iRule, but the status change is not updated to mcpd, or to other tmm threads.

As a result, the message 'Pool /Common/mypool member /Common/1.1.1.1:80 monitor status iRule down' does not appear in the log, and the status of the pool member is not updated when viewed in the GUI or via 'tmsh show ltm pool xxxx members'.

Conditions:
Using the LB::down command in an iRule.

Impact:
Because mcpd believes the pool member to be up, it does not update tmm's status, so tmm continues to regard it as down indefinitely, or until a monitor state change occurs.

If the LB::down command is used on all members of a pool, the affected tmms cannot load balance to that pool, even though the GUI/tmsh indicate that the pool has available members.

Because pool member status is stored on per-tmm basis and incoming connections are distributed across tmms using a hash, this can lead to apparently inconsistent results, where some traffic (traffic hitting a particular tmm) is rejected with an RST cause of 'No pool member available'.

Workaround:
No direct workaround, but the use of an inband monitor instead of the LB::down command may be effective. You must tune the inband monitor's settings to values consistent with the desired behavior.


910105 : Partial HTTP/2 payload may freeze on the BIG-IP system

Component: Local Traffic Manager

Symptoms:
HTTP/2 allows sending the payload in both directions gradually, until a frame with an END_STREAM flag closes a direction. The BIG-IP does not properly handles an early response from a server when HTTP router is configured on a virtual and partial payload sent in each direction. In this case, communication over the stream hangs.

Conditions:
-- Virtual server is configured on the BIG-IP system with HTTP and HTTP/2 profiles on both the client and server sides.
-- HTTP router profile is configured on the virtual server.
-- Client sends a request and delivers a partial payload, waiting for a response from a server.
-- Server responds with a partial payload.

Impact:
A response with a partial payload is not delivered to a client. Communication freezes on that specific stream.

Workaround:
None.


909997-2 : Virtual server status displays as unavailable when it is accepting connections

Component: Local Traffic Manager

Symptoms:
After a rate limit is triggered and released, the virtual server status in the GUI remains as 'unavailable'. The virtual server resumes accepting new connections while the GUI shows the virtual server is unavailable.

Conditions:
-- The virtual server has a source address list configured.
-- Address lists define more than one address.
-- The connections are over the rate limit, and the virtual server status is marked unavailable.
-- The number of connections falls below the limit.

Impact:
Actual virtual server status is not reflected in GUI.

Workaround:
If the deployment design allows, you can use either of the following workarounds:

-- Remove the source address list from the virtual server.

-- Have a single address in the source address list.


909677-1 : HTTP/2 full proxy always sets the :scheme pseudo-header for HTTPS requests where the server-side connection is not encrypted

Component: Local Traffic Manager

Symptoms:
When using HTTP/2, the :scheme pseudo-header appears to always be set to HTTPS on requests, even when the server-side connection is not encrypted.

Conditions:
-- Using an HTTP/2 virtual server.
-- The server-side connection that is unencrypted.

Impact:
The impact of this issue varies based on how the application reacts at the server-side.

Workaround:
None.


909505-4 : Creating LTM data group external object fails.

Component: TMOS

Symptoms:
iControl REST command to create a data group fails if you do not set the externalFileName variable.

The same command works in tmsh, and you are not required to specify the externalFileName.

Conditions:
-- Creating a data group using iControl REST.
-- POST payload does not contain the externalFileName variable.

Impact:
You are unable to create the data group.

Workaround:
The command works if you specify the externalFileName parameter:

curl -sku $PASS https://$HOST/mgmt/tm/ltm/data-group/external -X POST -H "Content-type: application/json" -d '{"name":"fooBar", "externalFileName":"fooBar.txt"}'


909485-4 : Deleting LTM data-group external object incorrectly reports 200 when object fails to delete

Component: TMOS

Symptoms:
When you delete an LTM external data-group object using iControl REST, it incorrectly returns '200 OK' even though the object is not deleted.

Conditions:
-- Deleting an external data-group object via iControl REST.
-- The LTM external data-group object is referenced by another object (such as an iRule).

Impact:
The object still exists, even though the system returns a '200 OK' message indicating that the operation completed successfully.

Workaround:
None.


909161-2 : A core file is generated upon avrd process restart or stop

Component: Application Visibility and Reporting

Symptoms:
Sometime when avrd process is stopped or restarted, a core is generated.

Conditions:
Avrd process is stopped or restarted.

Impact:
There is no impact on system functioning.

Workaround:
None


908829-2 : The iqsyncer utility may not write the core file for system signals

Component: Global Traffic Manager (DNS)

Symptoms:
In certain instances, the iqsyncer utility may not write the core file for system signals.

Conditions:
SELinux policies enabled.
-- Run the iqsyncer utilities to initiate a core dump with system signals SIGABRT, SIGQUIT, and SIGSEGV.

Impact:
The iqsyncer utility does not write core file.

Workaround:
Disable SELinux with 'setenforce 0'.

You can now generate a core with a SIGQUIT (-3), but not with SIGABRT or SIGSEGV.


908801-2 : SELinux policies may prevent from iqsh/iqsyncer dumping core

Component: Global Traffic Manager (DNS)

Symptoms:
SELinux policies may prevent the iqsh/iqsyncer utilities from dumping core information.

Conditions:
-- SELinux policies enabled.
-- Run the iqsh/iqsyncer utilities to initiate a core dump.

Impact:
The operation does not result in dumping the core information.

Workaround:
Disable SELinux with 'setenforce 0'.


908753-2 : Password memory not effective even when password policy is configured

Component: TMOS

Symptoms:
The BIG-IP system does not prevent you from specifying previously used passwords, even if Secure Password Enforcement is enabled with password memory set to a non-zero value.

Conditions:
-- Password memory in auth settings is not 0 (zero).
-- Attempt to specify a previously specified password

Impact:
Password history to prevent user from using same password is not enforced.

Workaround:
None.


908601-1 : System restarts repeatedly after using the 'diskinit' utility with the '--style=volumes' option

Component: TMOS

Symptoms:
When the BIG-IP system boots, mcpd continually restarts.

Conditions:
This may occur after you issue the 'diskinit' command with the '--style=volumes' option in the MOS (Maintenance Operating System) shell, install BIG-IP into the new volume, then boot into the new installation of the BIG-IP system.

Impact:
The BIG-IP system is unable to complete the boot process and become active.

Workaround:
In the MOS shell, do not issue the 'diskinit' command with the '--style=volumes' option.

Instead, on BIG-IP v14.1.2.1 and later, you may use the 'image2disk' utility with the '-format' option to recreate the desired volume.

You also can achieve the same result by following the shell guidance. To begin, type 'start<enter>'.


If the system is already in the defective state, use this shell command, and then reboot:

touch /.tmos.platform.init

The problem should be resolved.


908477-1 : Request-adapt plus request-logging causes HTTP double-chunking in an ICAP request

Component: Service Provider

Symptoms:
When an HTTP chunked request is sent to a virtual server that has both a request-adapt (e.g., for ICAP), and a request-logging profile attached, the request that is sent to the ICAP server is doubly chunked.

Conditions:
-- A virtual server is configured with both a request-adapt (ICAP) and request-logging profile.
-- HTTP chunked requests are sent to this virtual server.

Impact:
Data corruption in the HTTP stream.

Workaround:
You can use either of the following workarounds:

-- Force rechunking on the HTTP profile:
request-chunking rechunk

-- Remove the request-logging profile (and potentially log requests) using an iRule instead.


908453-4 : Trunks with names longer than 32 characters update working-mbr-count in vCMP guests incorrectly

Component: TMOS

Symptoms:
When a trunk is configured with a name longer than 32 characters on a vCMP host, guests update the working-mbr-count for the trunk incorrectly when another trunk on the host changes. This might result in vCMP guests failing over unexpectedly.

Conditions:
-- Trunk configured with a name longer than 32 characters on vCMP host.
-- Trunk made available to guests for high availability (HA) Group scoring.
-- At least one other trunk configured on vCMP host.
-- Interface state changes in any other trunk.

Impact:
The vCMP guests may fail over unexpectedly.

Workaround:
Do not use trunk names longer than 32 characters.


908173-1 : Empty fields are shown in the policy version history

Component: Application Security Manager

Symptoms:
Empty fields are displayed instead of N/A in the policy version history.

Conditions:
1. Create and apply a new policy.
2. Open General Settings screen.
3. Open Policy Version History.

Impact:
Empty fields are shown (Source Policy Name and Source Host Name are empty), potentially implying an error condition, when in fact the field values are not applicable in this case.

Workaround:
None.


907997-1 : Source Policy Name instead of Current Policy used in Restore Policy Version

Component: Application Security Manager

Symptoms:
When trying to restore the policy from a previous version, the incorrect policy name is shown in the dialog window.

Conditions:
This is encountered while restoring policies from a previous version via the GUI.

Impact:
Misleading policy name is shown on restore policy dialog.

Workaround:
None.


907873-1 : Authentication tab is missing in VPE for RDG-RAP Access Policy type

Component: Access Policy Manager

Symptoms:
Authentication tab is missing in Visual Policy Editor (VPE) for RDG-RAP Access Policy type

Conditions:
Configuration of RDG-RAP Access Policy type in VPE.

Impact:
Authentication tab with AD/LDAP Query agents is missing in VPE.

Workaround:
Use the tmsh cli configuration of AD/LDAP Query for RDG-RAP Access Policy type.


907549-2 : Memory leak in BWC::Measure

Component: TMOS

Symptoms:
Memory leak in BWC calculator.

Conditions:
When the HSL log publisher is attached to the BWC::Measure instance in the Bandwidth policy.

Impact:
A memory leak occurs.

Workaround:
None.


907337-1 : BD crash on specific scenario

Component: Application Security Manager

Symptoms:
BD crashes.

Conditions:
A specific scenario that results in memory corruption.

Impact:
Failover, traffic disturbance. Traffic disrupted while BD restarts.

Workaround:
None.


907177-1 : Priority of embedded APM iRules is ignored

Component: Local Traffic Manager

Symptoms:
Custom iRule events are executed before the embedded APM iRule events, despite the custom iRule's priority value being larger than the APM iRule's priority value.

Conditions:
-- APM is provisioned.
-- Custom iRule with a priority value larger the APM iRule's priority value.

Impact:
Custom iRule event is executed before APM iRule event.

Workaround:
None.


907045-1 : QUIC HANDSHAKE_DONE is sent at the end of first flight

Component: Local Traffic Manager

Symptoms:
QUIC does not send the HANDSHAKE_DONE immediately on conclusion of the handshake. Instead, it sends an entire flight of data first.

Conditions:
This happens in normal operation.

Impact:
The end user system has to store handshake state longer than it might have to otherwise.

Workaround:
None.


907025-4 : Live update error" 'Try to reload page'

Component: Application Security Manager

Symptoms:
When trying to update Attack Signatures. the following error message is shown:

Could not communicate with system. Try to reload page.

Conditions:
Insufficient disk space to update the Attack Signature.

Impact:
Live Update unable to restore the database during startup. Device runs out of disk space, which leads to failure in writing live update hsqldb log file. The liveupdatedb.script file, which is based on the .log file, is truncated and missing necessary settings in order to initialize the live update database.

Workaround:
This following procedure restores the database to its default, initial state:

1. Remove the sigfile.tmp.* directories under /var/ts/var/tmp.

2. Delete the script:
delete /var/lib/hsqldb/live-update/liveupdatedb.script

3. Create a new script:
create new /var/lib/hsqldb/live-update/liveupdatedb.script.

4. Add the following lines to create the live update database schema and set the SA user as expected:

 CREATE SCHEMA PUBLIC AUTHORIZATION DBA
 CREATE MEMORY TABLE AVAILABILITY(ID VARCHAR(255) NOT NULL,ERRORMESSAGE VARCHAR(255),LASTCHECKDATETIME BIGINT,LASTCHECKUPDATEFILE VARCHAR(255),STATUS VARCHAR(255),"TYPE" VARCHAR(255),CONSTRAINT AVAILABILITY_PK PRIMARY KEY(ID))
 CREATE MEMORY TABLE INSTALLSCHEDULE(ID VARCHAR(255) NOT NULL,APPLYATALLTIMES BOOLEAN,APPLYONALLDAYS BOOLEAN,APPLYONFRIDAYS BOOLEAN,APPLYONMONDAYS BOOLEAN,APPLYONSATURDAYS BOOLEAN,APPLYONSUNDAYS BOOLEAN,APPLYONTHURSDAYS BOOLEAN,APPLYONTUESDAYS BOOLEAN,APPLYONWEDNESDAYS BOOLEAN,ENDTIME VARCHAR(255),FREQUENCY VARCHAR(255),STARTTIME VARCHAR(255),"TYPE" VARCHAR(255),CONSTRAINT INSTALLSCHEDULE_PK PRIMARY KEY(ID))
 CREATE MEMORY TABLE UPDATEFILE(ID VARCHAR(255) NOT NULL,CREATEDATETIME BIGINT,FILELOCATION VARCHAR(255),FILENAME VARCHAR(255),ISFILEAVAILABLE BOOLEAN,ISFILEMANUALLYUPLOADED BOOLEAN,ISGENESIS BOOLEAN,MD5 VARCHAR(255),"TYPE" VARCHAR(255),CONSTRAINT UPDATEFILE_PK PRIMARY KEY(ID))
 CREATE MEMORY TABLE INSTALLATION(ID VARCHAR(255) NOT NULL,ADDEDENTITIESCOUNT INTEGER,DELETEDENTITIESCOUNT INTEGER,ERRORMESSAGE VARCHAR(255),LASTREADMEFILENAME VARCHAR(255),LASTUPDATEMICROS BIGINT,LOADDATETIME BIGINT,MODIFIEDENTITIESCOUNT INTEGER,README VARCHAR(500000),STATUS VARCHAR(255),"TYPE" VARCHAR(255),UPDATEFILE_ID_OID VARCHAR(255),CONSTRAINT INSTALLATION_PK PRIMARY KEY(ID),CONSTRAINT INSTALLATION_FK1 FOREIGN KEY(UPDATEFILE_ID_OID) REFERENCES UPDATEFILE(ID))
 CREATE INDEX INSTALLATION_N49 ON INSTALLATION(UPDATEFILE_ID_OID)
 CREATE MEMORY TABLE INSTALLATION_DELETEDENTITYLIST(ID_OID VARCHAR(255) NOT NULL,"ELEMENT" LONGVARBINARY,IDX INTEGER NOT NULL,CONSTRAINT INSTALLATION_DELETEDENTITYLIST_PK PRIMARY KEY(ID_OID,IDX),CONSTRAINT INSTALLATION_DELETEDENTITYLIST_FK1 FOREIGN KEY(ID_OID) REFERENCES INSTALLATION(ID))
 CREATE INDEX INSTALLATION_DELETEDENTITYLIST_N49 ON INSTALLATION_DELETEDENTITYLIST(ID_OID)
 CREATE MEMORY TABLE INSTALLATION_MODIFIEDENTITYLIST(ID_OID VARCHAR(255) NOT NULL,"ELEMENT" LONGVARBINARY,IDX INTEGER NOT NULL,CONSTRAINT INSTALLATION_MODIFIEDENTITYLIST_PK PRIMARY KEY(ID_OID,IDX),CONSTRAINT INSTALLATION_MODIFIEDENTITYLIST_FK1 FOREIGN KEY(ID_OID) REFERENCES INSTALLATION(ID))
 CREATE INDEX INSTALLATION_MODIFIEDENTITYLIST_N49 ON INSTALLATION_MODIFIEDENTITYLIST(ID_OID)
 CREATE MEMORY TABLE INSTALLATION_ADDEDENTITYLIST(ID_OID VARCHAR(255) NOT NULL,"ELEMENT" LONGVARBINARY,IDX INTEGER NOT NULL,CONSTRAINT INSTALLATION_ADDEDENTITYLIST_PK PRIMARY KEY(ID_OID,IDX),CONSTRAINT INSTALLATION_ADDEDENTITYLIST_FK1 FOREIGN KEY(ID_OID) REFERENCES INSTALLATION(ID))
 CREATE INDEX INSTALLATION_ADDEDENTITYLIST_N49 ON INSTALLATION_ADDEDENTITYLIST(ID_OID)
 CREATE USER SA PASSWORD ""
 GRANT DBA TO SA
 SET WRITE_DELAY 20
 SET SCHEMA PUBLIC

5. Restart the tomcat process:
bigstart restart tomcat


906885-2 : Spelling mistake on AFM GUI Flow Inspector screen

Component: Advanced Firewall Manager

Symptoms:
On the AFM GUI Flow Inspector screen, there is a spelling mistake 'Additinal Info'. It should read 'Additional Info'.

Conditions:
You can locate the spelling error by following these steps:
1. Navigate to Security :: Debug :: Flow Inspector :: Get Flows (should be blank).
2. Select New Flows and then Get Flows.
3. Select the flow (i.e., click anywhere on the result except the hyperlink).

Impact:
There is a spelling mistake on the word 'Additional'. There is no functional impact to the system; this is a cosmetic issue only.

Workaround:
None.


906653-2 : Server side UDP immediate idle-timeout drops datagrams

Component: Local Traffic Manager

Symptoms:
With immediate idle-timeout, flows may be closed before a datagram is forwarded.

Conditions:
-- Immediate idle-timeout is set on the server context of a UDP virtual server.

Impact:
Datagrams are dropped periodically depending on traffic load.

Workaround:
None.


906505-1 : Display of LCD System Menu cannot be configured via GUI on iSeries platforms

Component: TMOS

Symptoms:
In the BIG-IP Graphical User Interface (TMUI), display of the System Menu on the LCD front panel of most BIG-IP platforms can be enabled or disabled under System :: Configuration :: Device :: General.

However, on iSeries appliances, the 'Display LCD System Menu' option does not appear on this page.

Conditions:
This occurs on the following iSeries appliances:
-- i850
-- i2000-series (i2600/i2800)
-- i4000-series (i4600/i4800)
-- i5000-series (i5600/i5800/i5820-DF)
-- i7000-series (i7600/i7600-D/i7800/i7800-D/i7820-DF)
-- i10000-series (i10600/i10600-D/i10800/i10800-D)
-- i11000-series (i11600/i11800/i11400-DS/i11600-DS/i11800-DS)
-- i15000-series (i15600/i15800)

Impact:
The 'Display LCD System Menu' option cannot be configured via the GUI.

Workaround:
You can enable display of the LCD System Menu using the Command Line (CLI) by running the following commands, in sequence:

tmsh mod sys global-settings lcd-display [enabled|disabled]
tmsh mod sys db lcd.showmenu value [enabled|disabled]


906449-1 : Node, Pool Member, and Monitor Instance timestamps may be updated by config sync/load

Component: TMOS

Symptoms:
The text that describes the monitor state of an LTM node, pool member, or monitor instance also contains a timestamp that initially indicates when the monitor set the affected node or pool member to the indicated state. This timestamp can be affected by other actions, such as incremental or full config sync and config load.

The monitor-state description and timestamp can be viewed in the CLI (CLI/TMSH) and GUI (TMUI) as follows:

-- From the CLI/TMSH:
tmsh show ltm monitor <monitor_type> <monitor_name>

This command shows the state of ltm nodes or pool members currently monitored by the specified ltm health monitor, as in the following example:
-------------------------------------
 LTM::Monitor /Common/mysql_test
-------------------------------------
   Destination: 10.10.200.28:3296
   State time: down for 1hr:58mins:42sec
   | Last error: No successful responses received before deadline. @2020.03.25 14:10:24

-- From the GUI:
   + Navigate to Local Traffic :: Nodes : Node List :: <node_name>. The 'Availability' field shows text describing the node's monitored state with a timestamp.

   + Navigate to Local Traffic :: Pools : Pool List :: <pool_name>, under the Members tab, click the pool member name. The 'Availability' field shows text describing the pool member's monitored state with a timestamp.

Conditions:
This may occur under the following conditions:

-- If an incremental config sync occurs from one high availability (HA) member to another member or to the device group:
   + The timestamp on monitor instances for all Nodes or Pool Members (as shown by 'tmsh show ltm monitor <type> <name>') may be updated on HA members receiving the incremental config sync.
   + If a Node or Pool Member has been marked DOWN by a monitor, its timestamp may be updated in the GUI (Node List/Pool-Member list) on HA members receiving the incremental config sync.

-- If a full/forced config sync occurs from one HA member to another member or to the device group:
   + The timestamp on monitor instances for all Nodes or Pool Members (as shown by 'tmsh show ltm monitor <type> <name>') may be updated on HA members receiving the incremental config sync.
   + The timestamp for all Nodes or Pool Members may be updated in the GUI (Node List/Pool-Member list) on HA members receiving the incremental config sync.

-- If a config load occurs:
   + The timestamp on monitor instances for all Nodes or Pool Members (as shown by 'tmsh show ltm monitor <type> <name>') may be updated on the HA member where the config load occurred.
   + The timestamp for all Nodes or Pool Members may be updated in the GUI (Node List/Pool-Member list) on the HA member where the config load occurred.

Impact:
The timestamp indicated next to the monitored-state description for an LTM Node or Pool Member indicates when the Node or Pool Member was updated in ways other than by its configured monitor. Thus, this timestamp may not indicate the actual time of the monitor event suggested by the description text.

Workaround:
None.


905669-1 : CSRF token expired message for AJAX calls is displayed incorrectly

Component: Application Security Manager

Symptoms:
CSRF token expired message for AJAX calls is displayed incorrectly in alert message

Conditions:
This can occur if a BIG-IP administrator or user navigates to pages containing AJAX calls that modify a policy when the CSRF token is already expired. This occurs very rarely.

Impact:
Each letter in message is shown in new line in alert message


905477-1 : The sdmd daemon cores during config sync when multiple devices configured for iRules LX

Component: Local Traffic Manager

Symptoms:
The iRules LX workspaces belong on only one device in a Device Service Cluster (DSC). If you have the same iRules LX workspace configured on multiple devices and then perform a config sync operation, the sdmd daemon cores.

Conditions:
-- Multiple devices configured with the same iRules LX workspace in a DSC.
-- Change one of the devices such that the configuration requires a config sync.
-- Perform the config sync.

Impact:
The sdmd daemon cores. Although having multiple devices configured with the same iRules LX workspace is an incorrect configuration, sdmd should not core.

Workaround:
When the iRules LX workspace is correctly configured, i.e., on only one device in a DSC, there is no need to config sync, so this issues does not occur.


905153-3 : HW offload of vector 22 (IPv6 Duplicate Extension Headers) not operational

Component: Advanced Firewall Manager

Symptoms:
All mitigation for IPv6 Duplicate Extension Headers DoS vector happens at the software level. The counter in int_drops column reads 0 (zero) in dos_stat tmctl for that vector.

Conditions:
Double IPv6 headers in the packets (except Destination Options header).

Impact:
You cannot offload DDoS vector 22 to FPGA hardware. Only the software-based DDoS mitigation is supported.

Workaround:
Use software DDoS mitigation for this vector.


904713-1 : FailoverState device status and CM device status do not match shortly after triggering failover

Component: TMOS

Symptoms:
After triggering failover, the result returned by the API endpoint /mgmt/tm/shared/bigip-failover-state (the BIG-IP failover state worker) may not match the actual device failover state.

Conditions:
This may happen on an high availability (HA) setup with a sync-failover device group.

Impact:
Actions that require the correct output of the BIG-IP failover state worker may fail. For instance, deleting an SSL Orchestrator topology followed by immediately triggering failover may encounter this issue, causing the deletion to fail.

Workaround:
After waiting for a short amount of time, the BIG-IP failover state worker gets in sync with the device failover state. So in the example of deleting an SSL Orchestrator topology, the deletion should be successful if you try again after a short wait.


904625-1 : Changes to SSL.CertRequest.* DB variables cause high availability (HA) devices go out of sync

Component: Local Traffic Manager

Symptoms:
The GUI saves SSL certificate/CSR subject fields data into SSL.CertRequest.* DB variables to use them in pre-populating subject fields for subsequent modifications.

Conditions:
-- SSL certificate/CSR modification through GUI.
-- Changing the content of the SSL.CertRequest.* DB variables.
-- High availability (HA) configuration.

Impact:
HA devices go out of sync.

Workaround:
SSL.CertRequest.* DB variables are used only as GUI SSL certificate/CSR pre-populated suggestions.

You can still review and modify them before completing SSL certificate/CSR modification operation, so it is safe to sync them onto the high availability (HA) peer.


904593-3 : Configuration overwritten when using Cloud Auto Scaling template and ASM Automatic Live Update enabled

Component: Application Security Manager

Symptoms:
When a Cloud Auto Scaling deployment is set up using F5's Auto Scale Template, and ASM Live Update is configured with Automatic Download enabled, the configuration may be overwritten during a scale out event when a new host joins the sync cluster. This is caused by a config sync from the new device to the master device, before the master has a chance to sync the configuration to the new device, causing the configuration in the master device to be overwritten.

Conditions:
-- Using F5's Auto Scaling template.
-- Auto Scale script is configured with --block-sync (which is the default).
-- ASM Live Update is configured with Automatic Download enabled.
-- A scale out event occurs.

Impact:
Configuration of all devices in the Auto Scale group is overwritten.

Workaround:
Disable ASM Live Update Automatic Download.

This can be done by disabling the liveupdate.autodownload DB variable using the onboard.js script, and adding '-d liveupdate.autodownload:disable'.

For example:
/usr/bin/f5-rest-node /config/cloud/aws/node_modules/@f5devcentral/f5-cloud-libs/scripts/onboard.js --log-level silly --signal ONBOARD_DONE -o /var/log/cloud/aws/onboard.log --host localhost --port 8443 -d tm.tcpudptxchecksum:software-only -d liveupdate.autodownload:disable --ping

-d tm.tcpudptxchecksum:software-only -d liveupdate.autodownload:disable


904441-1 : APM vs_score for GTM-APM load balancing is not calculated correctly

Component: Access Policy Manager

Symptoms:
Output from the 'show ltm virtual <vs> detail' command reports an incorrect value for the APM Module-Score.

Conditions:
-- Using GTM/DNS and APM.
-- Configure an access profile attached to a virtual server.
-- Configure a non-zero number for 'Max Concurrent Users' for the access profile.
-- Access the virtual server.

Impact:
GTM/DNS load balancing does not work as expected.

Workaround:
None.


904401-4 : Guestagentd core

Component: TMOS

Symptoms:
Guestagentd crashes on a vCMP guest.

Conditions:
This can occur during normal operation in a vCMP environment.

Impact:
Guestagentd crashes on the vCMP guest, and the vCMP host does not have accurate guest information, such as version, provisioning, high availability (HA) status, and tmm status.

Workaround:
None.


904041-1 : Ephemeral pool members may be incorrect when modified via various actions

Component: Local Traffic Manager

Symptoms:
Ephemeral pool members may not be in the expected state if the corresponding FQDN template pool member is modified by one of several actions.

For example:

A. Ephemeral pool members may be missing from a pool in a partition other than Common, after reloading the configuration of that partition.

B. Ephemeral pool members may not inherit the 'session' state from the corresponding FQDN template pool member if the FQDN template pool member is disabled (session == user-disabled), the config is synced between high availability (HA) members, and BIG-IP is restarted.

Conditions:
Scenario A may occur when reloading the configuration of non-'Common' partition, e.g.:
-- tmsh -c "cd /testpartition; load sys config current-partition"

Scenario B may occur when an FQDN template pool member is disabled (session == user-disabled), the config is synced between HA members, and BIG-IP is restarted.

Impact:
Impacts may include:
- Missing ephemeral pool members, inability to pass traffic as expected.
- Ephemeral pool members becoming enabled and receiving traffic when expected to be disabled.

Workaround:
For scenario A, reload the entire configuration instead of just the individual partition.

For scenario B, it may be possible to work around this issue by checking the status of ephemeral pool members after BIG-IP restart, and toggling the 'session' value between user-enabled and user-disabled.


903581-4 : The pkcs11d process cannot recover under certain error condition

Component: Local Traffic Manager

Symptoms:
When the connection between the BIG-IP system and HSM (SafeNet) is interrupted, pkcs11d is unable to recover in some case.

Conditions:
Connection between the BIG-IP system and the HSM device is interrupted.

Impact:
SSL handshake failure.

Workaround:
Restart the pkcs11d process using the following command:
restart /sys service pkcs11d


903573-2 : AD group cache query performance

Component: Access Policy Manager

Symptoms:
Active Directory queries are slow.

Conditions:
-- Active Directory (AD) authentication used
-- There are lots of AD caches in the environment, and users are in deeply nested groups.

Impact:
Active Directory query time can be excessive.


903521-1 : TMM fails to sign responses from BIND when BIND has 'dnssec-enable no'

Component: Global Traffic Manager (DNS)

Symptoms:
TMM fails to sign responses from BIND.

Conditions:
BIND has 'dnssec-enable no' in named.conf.

Impact:
TMM fails to sign responses from BIND.

Workaround:
Remove 'dnssec-enable no' from named.conf in options section.


903265-4 : Single user mode faced sudden reboot

Component: TMOS

Symptoms:
Being logged into the system in single user mode (emergency shell) causes a sudden automatic reboot after some time (~5-to-10 minutes, or longer).

Conditions:
-- Using iSeries platforms.
-- When logged into the emergency shell by appending rd.break to kernel command line.

Impact:
The device reboots after some time. Because of the automatic reboot, you cannot reliably use the emergency shell.

Workaround:
None.


902377-3 : HTML profile forces re-chunk even though HTML::disable

Component: Local Traffic Manager

Symptoms:
HTML profile performs a re-chunk even though HTML::disable has been executed in the HTTP_RESPONSE event.

Conditions:
Using HTML::disable in an HTTP_RESPONSE event.

Impact:
The HTML profile still performs a re-chunk.

Workaround:
None.


901989-1 : Boot_marker writes to /var/log/btmp

Component: TMOS

Symptoms:
The boot_marker is written to /var/log/btmp, but /var/log/btmp is a binary file.

A message similar to:

Apr 21 09:19:52 bigip1 warning sshd[10901]: pam_lastlog(sshd:session): corruption detected in /var/log/btmp

... may be logged to /var/log/secure.

Conditions:
-- Rebooting a BIG-IP.

Impact:
Since this file is unknowingly corrupt at first boot, any potential investigation needing this data may be compromised.

Workaround:
After bootup you can truncate the file.
$ truncate --size 0 /var/log/btmp


901985-7 : Extend logging for incomplete HTTP requests

Component: TMOS

Symptoms:
Logging is not triggered for incomplete HTTP requests.

Conditions:
- HTTP profile is configured.
- Request-log profile is configured.
- HTTP request is incomplete.

Impact:
Logging is missing for incomplete HTTP requests.

Workaround:
None.


901669-5 : Error status in "show cm failover-status" after MGMT-IP change

Component: TMOS

Symptoms:
The "tmsh show cm failover-status" command shows failover connection status "Error" on one device, but manual failover is working properly.

Conditions:
-- Two or more devices configured with high availability (HA) and are in sync.
-- The management IP address is changed on one of the devices
--show cm failover-status" on peer. You will see "show cm failover-status" returns "Error" status.

Impact:
The tmsh show cm failover-status command indicates an error, even though the devices are in sync and failover communication is working.

Workaround:
tmsh restart sys service sod


901569-3 : Loopback traffic might get dropped when VLAN filter is enabled for a virtual server.

Component: Local Traffic Manager

Symptoms:
Loopback traffic (local traffic) destined to a virtual server might get dropped when the incoming packet matches a terminating connection flow.

Conditions:
-- VLAN filter is enabled on the virtual server created for loopback traffic processing.
-- An incoming packet matches a terminating connection flow (i.e., the connection flow terminates because of timeout, being dropped by iRule, etc.).

Impact:
Traffic that is matched against a terminating connection flow of a virtual is not processed by the virtual server.

Workaround:
Because this filter is ignored for loopback traffic, removing the 'Enabled On VLAN' filter at the virtual server mitigates the issue.


901485-1 : HTTP_RESPONSE_RELEASE is not raised for HTTP early response

Component: Local Traffic Manager

Symptoms:
When server sends the response early (before the request is completed), client-side HTTP sends the response but does not raise HTTP_RESPONSE_RELEASE.

Conditions:
- HTTP profile is configured.
- Request-log profile is configured.
- HTTP request is incomplete.

Impact:
Timeout occurs and the BIG-IP system sends shutdown.

Workaround:
None


901041-2 : CEC update using incorrect method of determining number of blades in VIPRION chassis

Component: Traffic Classification Engine

Symptoms:
There is an issue with the script used for the Traffic Intelligence (CEC (Classification Engine Core)) Hitless Upgrade that misses installing on some blades during install/deploy on VIPRION systems.

Symptoms include:
-- POST error in the GUI.
-- Automatic classification updates are downloaded successfully, but downloaded packages disappear after some time if you do not proceed to install/deploy.

Conditions:
-- CEC hitless update.
-- Using VIPRION chassis.

Impact:
Unable to auto-update Classification signature package on all slots, because the slot count reported for CEC is 0. These packages are installed only on the current slot.

Workaround:
Install the package manually on each slot.

Note: When you refresh the GUI page, the downloaded package appears in the 'Available to Install' list, and you can proceed to install on each slot.


901033-4 : TCP::respond causing memory exhaustion issue when send buffer overwhelmed available TCP window

Component: Service Provider

Symptoms:
With increasing traffic on a virtual server with an iRule configured to send TCP::respond, iRules operate fine until some threshold is reached, after which memory usage continually increases even though the traffic level remains stable. This memory growth increases until the reaper is activated and connections are removed.

Conditions:
A specific threshold of data is reached. The threshold varies, depending on the memory available on the BIG-IP system.

Impact:
Memory usage continually increases even though the traffic level remains stable. This memory growth increases until the reaper is activated and connections are removed. A tmm core is observed. Traffic disrupted while tmm restarts.

Workaround:
None.


900933-3 : IPsec interoperability problem with ECP PFS

Component: TMOS

Symptoms:
IPsec tunnels fails to remain established after initially working.
 
On the first ESP Security Associations (SAs) establishment, an IPsec tunnel works. After the expiry of the SAs causes a re-key, the keys are calculated incorrectly by the BIG-IP system. The BIG-IP system sends ESP packets to the remote peer, but the remote peer cannot decrypt the packet. Likewise, the BIG-IP system cannot decrypt packets from the remote peer.

This may also immediately present as a problem when trying to establish a second tunnel to the same peer.

Conditions:
- IPsec IKEv2 tunnel.
- A remote peer that is not another BIG-IP system.
- Elliptic curve groups (ECP) is used for Perfect Forward Secrecy (PFS).

Impact:
Multiple IPsec tunnels to the same remote peer cannot be established concurrently, or tunnels fail after a period of time.

Workaround:
Do not use ECP for PFS.


900485-1 : Syslog-ng 'program' filter does not work

Component: TMOS

Symptoms:
The 'program' filter type does not work with the BIG-IP system's version of syslog-ng.

Conditions:
-- Using the 'program' expression in a syslog-ng filter.

Impact:
Unable to filter messages as expected.

Workaround:
None.


899933-1 : Listing property groups in TMSH without specifying properties lists the entire object

Component: TMOS

Symptoms:
When listing a property group, if you do not specify any specific properties within that group, the entire object is listed.

Conditions:
-- Using TMSH to list a property group of an object.
-- Not specifying any properties within the property group.

Impact:
Unexpected output.

Workaround:
None.


899253-1 : [GUI] GTM wideip-pool-manage in GUI fails when tens of thousands of pools exist

Component: Global Traffic Manager (DNS)

Symptoms:
Making changes to wide IP pools through GUI management do not take effect.

Conditions:
-- GTM configuration contains a sufficiently high number of pools (~ 15,000).
-- Using the GUI to assign a pool to a wide IP.

Impact:
Changes do not take effect. Unable to use the GUI to manage which pools are associated with a wide IP.

Workaround:
Use TMSH.


899097-3 : Existence of rewrite profile with HTTP profile response chunking mode 'sustain' always triggers client-side chunking

Component: TMOS

Symptoms:
When using the rewrite profile, unchunked server responses where content-type is not text/html or text/css also gets converted to chunked encoding in client-side. Also, the server response is missing a message-body (no content-type/content-length).

The client device receives 'Transfer-Encoding: chunked' in the message-header and receives a chunked body if the origin response has a message-body. The client receives a zero-length chunk if the origin response has no message-body.

Prior to BIG-IP version 15, chunking happens only if origin server response has content-type header set to either text/html or text/css.

Conditions:
- HTTP profile response chunking is set to 'sustain'.
- The virtual server has rewrite profile attached.
- Server response has content-type set not to text/html or text/css OR no content-type header.

Impact:
End users may notice a change in chunking behavior after upgrading from prior release.

Workaround:
Use response chunking mode 'unchunk'


899085-7 : Configuration changes made by Certificate Manager role do not trigger saving config

Component: TMOS

Symptoms:
Configuration changes made in the BIG-IP GUI by a user with role 'Certificate Manager' do not result in the configuration being saved.

If the system is rebooted (or MCPD restarted) without saving the configuration, those changes will be lost.

Conditions:
-- User with role 'Certificate Manager'.
-- Changes made in GUI.
-- System rebooted.

Impact:
Loss of configuration changes.

Workaround:
Users with a 'Certificate Manager' role can save the configuration from tmsh:
tmsh save /sys config

Alternately, another user can save the configuration.


898929-5 : Tmm might crash when ASM, AVR, and pool connection queuing are in use

Component: Local Traffic Manager

Symptoms:
TMM crashes and generates a core file.

Conditions:
-- System is provisioned for at least ASM, AVR, and LTM.
-- An LTM pool is configured to use connection queuing.
-- The LTM pool is used on a virtual server with an analytics profile.

Impact:
Tmm might crash. Traffic disrupted while tmm restarts.

Workaround:
Disable connection queuing on the pool.


898825-1 : Attack signatures are enforced on excluded headers under some conditions

Component: Application Security Manager

Symptoms:
Attack signatures are marked as detected when they should be marked as excluded (i.e., a false positive).

Conditions:
-- A 100-continue transaction occurs in HTTP.
-- The internal parameter answer_100_continue is set to a non-default value of 0.

Impact:
False positive enforcement for header signature.

Workaround:
Set the answer_100_continue to 1 (default) on versions later than 15.0.0.


898753-6 : Multicast control-plane traffic requires handling with AFM policies

Component: Local Traffic Manager

Symptoms:
AFM virtual-server specific rules are being matched against control-plane traffic.

Conditions:
-- Broadcast OSPF configured.
-- AFM provisioned.
-- OSPF neighbor configured.

Impact:
OSPF neighborship is not formed.

Workaround:
Add an AFM route-domain policy.


898741-1 : Missing critical files causes FIPS-140 system to halt upon boot

Component: Application Security Manager

Symptoms:
After activating a FIPS 140-2 license on a device and rebooting, the device fails to boot.

Conditions:
-- Device is licensed for FIPS 140 mode
-- A critical system file is missing

Impact:
System halts during boot because of sys-eicheck.py failure.

Workaround:
Prior to rebooting into FIPS 140-2 mode, ensure that there are no missing critical files by running the sys-eicheck command.

If the missing files are due to missing signature update files:

- Manually upload the missing images in System ›› Software Management : Live Update - this will ensure that the image is associated with an installation record.


898733-4 : SSL handshakes fail on secondary blades for Thales keys created with fipskey.nethsm after upgrade to 14.1.x and re-import of the keys from HSM

Component: Local Traffic Manager

Symptoms:
SSL handshakes intermittently fail for virtual servers using HSM keys.

In /var/log/ltm you see errors:
err pkcs11d[6575]: 01680002:3: Key table lookup failed. error.

Conditions:
1. Keys were created on earlier versions of BIG-IP software with fipskey.nethsm wrapper, and the device was upgraded to 14.1.0 or later.

2. Keys were created on BIG-IP v14.1.0 or later directly, using fipskey.nethsm wrapper.

3. The platform is a multi-bladed Viprion.

This can occur after applying the workaround for ID758491:
https://cdn.f5.com/product/bugtracker/ID758491.html

Impact:
SSL handshakes that arrive on the secondary blade(s) fail.

Handshakes arriving on the primary blade work fine.

Workaround:
Re-install the Thales client after the upgrade.


898685-5 : Order of ciphers changes after updating cipher group

Component: Local Traffic Manager

Symptoms:
The order of cipher results may change with no modification in the cipher group.

Conditions:
Click 'Update' in a cipher group in the GUI without making any changes.

Impact:
The order of the ciphers changes. During a handshake, SSL/TLS may not be able to select ciphers in the preferred order.

Workaround:
Create a cipher rule with the preferred cipher order and include only a single rule in cipher group allow list.


898577-1 : Executing a command in "mgmt tm" using iControl REST results in tmsh error

Component: TMOS

Symptoms:
When you try to update the frequency of live-update using iControl REST, it results in a java exception being returned instead of updating the value.

Conditions:
When a command for updating the frequency of live updates is executed using iControl REST in an ASM configured BIG-IP.

Impact:
You are unable to update the frequency of live-update via iControl REST.


898333-1 : Unable to collect statistics from BIG-IP system after BIG-IQ restart

Component: Application Visibility and Reporting

Symptoms:
AVR fails to send statistics to BIG-IQ. Lack of stats data in the BIG-IQ console.

Conditions:
-- The BIG-IP system is connected to the Data Collection Device (DCD), BIG-IQ.
-- DCD is restarted.
-- DCD does not send to BIG-IQ configuration instructions via REST interface due to ID 898341.

Impact:
Unable to collect statistics from BIG-IP system. Lack of stats data in the BIG-IQ console.

Workaround:
Restart avrd:
bigstart restart avrd


898201-1 : Fqdn nodes are not getting populated after BIG-IP reboot when DNS server is accessed through a local virtual server.

Component: Local Traffic Manager

Symptoms:
After reboot, no access to services host using fqdn nodes.
-- fqdn nodes are not populated with IP addresses.
-- Unable to access virtual servers served by pools using fqdn nodes.

Conditions:
The issue happens after the BIG-IP is rebooted.
-- when DNS server is accessed through a local virtual server.
-- Single arm cloud BIG-IP with virtual server listening for DNS requests to redirect.

Impact:
-- FQDN DNS requests bypassing the listening virtual server.
-- Unable to access the pools of those configured fqdn nodes.

Workaround:
-- restarting dynconfd.
-- Running a script to trigger off "Tmm ready" and either delete the bad flow(s) or a specific connflow entry.
-- change the dummy dns server to be something in the same subnet as the single interface.


897437-6 : First retransmission might happen after syn-rto-base instead of minimum-rto.

Component: Local Traffic Manager

Symptoms:
If a TCP profile is configured with a syn-rto-base value that is lower than minimum-rto, the first retransmission might happen after syn-rto-base.

This behavior is encountered only if the BIG-IP system is unable to compute the new RTO value before the retransmission timer expires, meaning:

-- The BIG-IP system has not received a packet with a TCP timestamp reply.
-- The BIG-IP system has not received an ACK for a timed sequence number.

Conditions:
Configured value of syn-rto-base is lower than minimum-rto.

Impact:
Retransmission might happen sooner than expected.

Workaround:
There are two possible workarounds:

-- Avoid using a syn-rto-base value that is lower than the minimum-rto value (the default values are 3 seconds for syn-rto-base and 1 second for minimum-rto).

-- Consider enabling timestamps to allow faster RTT measurement.


897185-4 : Resolver cache not using random port distribution

Component: Local Traffic Manager

Symptoms:
Outgoing queries to backend dns server use incremented port numbers instead of being distributed random ports.

Conditions:
-- Fix of ID726176 is applied (see https://cdn.f5.com/product/bugtracker/ID726176.html )

Impact:
The port numbers are incremented.


896693-5 : Patch installation is failing for iControl REST endpoint.

Component: TMOS

Symptoms:
iControl REST async endpoint /mgmt/tm/task/util/ihealth behaving inconsistently:

-- A call to VALIDATE the async task is rejected with the error message: 'Operation is not allowed on component /util/ihealth.'
-- The task can be started by calling a different endpoint (e.g., /mgmt/tm/task/cli/script). In this case, the task completes immediately, however, a qkview generating iHealth util is still running. At the end, the qkview is generated.

Conditions:
-- Use iControl REST to create an async task for creating qkview using 'ihealth' with -n option (just generate file, do not upload to iHealth).
-- Try starting the async task by changing the status to VALIDATING.

Impact:
Patch for iControl REST endpoint is not successful. Patch operation is accepted by /mgmt/tm/task/cli/script/ but rejected by /mgmt/tm/task/util/ihealth.

Workaround:
None.


896689-5 : Asynchronous tasks can be managed via unintended endpoints

Component: TMOS

Symptoms:
An asynchronous task created on one endpoint can be started using some other endpoint

Conditions:
Create an asynchronous task e.g. creating qkview using ihealth
using endpoint /mgmt/tm/task/util/ihealth

Gather the task id of the created asynchronous task and send it to a different endpoint e.g. /mgmt/tm/task/cli/script

Impact:
The asynchronous task can be started using this endpoint but this is not intended behavior.


896125-1 : Reuse Windows Logon Credentials feature does not work with modern access policies

Component: Access Policy Manager

Symptoms:
Client users are not automatically logged on to the Edge client using previously entered Microsoft Windows credentials, while client users on Windows computers are prompted with a logon page to enter the credentials.

Conditions:
-- Access policy "customization type" should be set to "modern"
-- In connectivity profile, click Customize Package :: Windows.
-- Under Available Components, select the check box to enable User Logon Credentials Access Service.

Impact:
Unable to automatically logon to Edge client and user is prompted for credentials

Workaround:
Use standard access policy in the virtual server.


895801-1 : Changing an MRF transport-config's TCP profile does not take effect until TMM is restarted

Component: Service Provider

Symptoms:
After modifying an MRF transport-config to use a different TCP profile, TMM must be restarted for this change to take effect. tmm crash

Conditions:
-- Using MRF with a transport-config.
-- Modifying the transport-config so that it uses a different TCP profile.

Impact:
Expected changes do not take effect until TMM is restarted.

Workaround:
Restart TMM.

Note: Traffic is disrupted while tmm restarts.


895557-3 : NTLM profile logs error when used with profiles that do redirect

Component: Local Traffic Manager

Symptoms:
As of BIG-IP version 14.1, HTTP iRule commands that inspect HTTP state after the commands HTTP::respond, HTTP::redirect, and HTTP::retry returns errors instead of returning corrupt data (https://support.f5.com/csp/article/K23237429).

When the NTLM profile is configured, it does the same through a built-in TCL rule where among several things, it tries to check if HTTP::cookie exists. If a profile like HTTP exists wherein a redirect/respond/retry is configured, it results in a TCL error informing the admin that they are accessing an invalid HTTP state.

Conditions:
-- NTLM profile is configured alongside HTTP profile
-- One of the redirect/respond/retry commands has been executed before the NTLM profile accesses the state of HTTP (for ex. HTTP::collect, HTTP::close, HTTP::cookie, etc.).

Impact:
Tcl error is seen in /var/log/ltm informing the admin that the iRule operation executed after HTTP::redirect/retry/respond is not supported.

For example -
TCL error: _plugin_rule_/Common/ntlm_default_iis <HTTP_REQUEST> - ERR_NOT_SUPPORTED (line 1) invoked from within "HTTP::cookie exists [PROFILE::ntlm insert_cookie_name]"


895205-1 : A circular reference in rewrite profiles causes MCP to crash

Component: Local Traffic Manager

Symptoms:
MCPD crash when modifying rewrite profile.

Conditions:
-- More than one rewrite profile is configured.
-- At least two rewrite profiles are referencing each other circularly.

Impact:
MCPD crash. For a Device Service Cluster this results in a failover. For a standalone system, this results in an outage.

Workaround:
Do not create circular references with profiles.


895165-1 : Traffic-matching-criteria with "any" protocol overlaps with explicit protocols

Component: Local Traffic Manager

Symptoms:
An error like the example below when defining "any" protocol after previously defining traffic-matching-criteria with explicit protocols.
01b90011:3: Virtual Server /Common/vs-tcp's Traffic Matching Criteria /Common/vs-tcp_IP_VS_TMC_OBJ illegally shares destination address, source address, service port, and ip-protocol with Virtual Server /Common/vs-any destination address, source address, service port.

Conditions:
-- Previously defining traffic-matching-criteria with explicit protocols
-- Afterwards defining virtual server with "any" protocol

Impact:
Cannot define a valid virtual server with "any" protocol

Workaround:
N/A


894081-1 : The Wide IP members view in the WebUI may report the incorrect status for a virtual server.

Component: Global Traffic Manager (DNS)

Symptoms:
A virtual server which is actually down and should show red is reported as up and shows green.

Conditions:
This issue happens when a virtual server is marked down by the system due to inheriting the status of its parent link.

Note: This issue only affects Link Controller systems, and not DNS/GTM systems.

Impact:
The WebUI cannot be used to reliably assess the status of Wide IP members (virtual servers).

Workaround:
Use the tmsh utility in one of the following ways to inspect the status of Wide IP members:

# tmsh show gtm pool a members

# tmsh show gtm server virtual-servers


893905-1 : Wrong redirect from Charts to Requests Log when request status selected in filter

Component: Application Security Manager

Symptoms:
Incorrect filter applied when you are redirected from Charts page to Requests Log.

Conditions:
Select request status in filter in Charts page and apply filter and then click View Requests on the bottom of Charts page.

Impact:
Filter not applied in Requests Log page after redirect.

Workaround:
Filter can be applied manually after redirect.
There is mismatch between AVR request types and ASM request statuses, e.g., Blocked in AVR includes Unblocked as well.


893885-4 : The tpm-status command returns: 'System Integrity: Invalid' after Engineering Hotfix installation

Component: TMOS

Symptoms:
The tpm-status command incorrectly reports system integrity status as 'Invalid' even when system software is not modified.

Conditions:
-- BIG-IP software v14.1.0 or later version.
-- Engineering Hotfix installed on Trusted Platform Module (TPM)-supported BIG-IP platforms.

Impact:
Incorrect presentation of system software status; the status shows INVALID when it is actually valid.

Workaround:
None.


893813-4 : Modifying pool enables address and port translation in TMUI

Component: TMOS

Symptoms:
When modifying the pool for a virtual server, address translation and port translation checkboxes are enabled irrespective of their initial state.

Conditions:
-- Creating a virtual server using the GUI
-- Advanced Configuration is selected
-- Address Translation or Port Translation checkboxes are initially unchecked
-- You modify a pool from this screen

Impact:
Virtual server is created with address and port translation enabled.

Workaround:
You can disable it by again editing the virtual server.


893281-2 : Possible ssl stall on closed client handshake

Component: Local Traffic Manager

Symptoms:
If a client connection closes before finishing client ssl handshake, in some cases BIG-IP ssl does not close and connection remains until idle timeout.

Conditions:
Client ssl handshake and client FIN must arrive while BIG-IP server ssl finished is in crypto.

Impact:
Some ssl client connection remain until idle timeout.


893093-1 : An extraneous SSL CSR file in the /config/big3d or /config/gtm directory can prevent certain sections in the WebUI from showing.

Component: TMOS

Symptoms:
The intended screen does not show when you navigate in the WebUI to either of the following locations:

-- System :: Certificate Management :: Device Certificate Management->Device Trust Certificates

-- DNS :: GSLB :: Servers :: Trusted Server Certificates

The system returns the following error:

An error has occurred while trying to process your request.

Additionally, a Java stack trace is also logged to the /var/log/tomcat/catalina.out file.

Conditions:
An extraneous SSL CSR file is present in the /config/big3d or /config/gtm directory.

-- When the extraneous file is in the /config/big3d directory, the System :: Certificate Management :: Device Certificate Management :: Device Trust Certificates screen is affected.

-- When the extraneous file is in the /config/gtm directory, the DNS :: GSLB :: Servers :: Trusted Server Certificates screen is affected.

Impact:
The WebUI cannot be used to inspect those particular SSL certificate stores.

Workaround:
The /config/big3d and /config/gtm directories are meant to contain only one file each (client.crt and server.crt, respectively).

You can resolve this issue by inspecting those directories and removing any file that may have been accidentally copied to them.

For more information on those directories, refer to: K15664: Overview of BIG-IP device certificates (11.x - 15.x) :: https://support.f5.com/csp/article/K15664.


892801-1 : When an Internal Virtual Server is created without an existing 0.0.0.0 virtual address, it will have the state "disabled-by-parent"

Component: Local Traffic Manager

Symptoms:
When an Internal Virtual Server is created without an existing 0.0.0.0 virtual address, it will have the state "disabled-by-parent".

Conditions:
-- An Internal Virtual Server is created without an existing 0.0.0.0 virtual address.

Impact:
The Internal Virtual Server will be considered unavailable and will not process traffic.

Workaround:
Create a 0.0.0.0 virtual address prior to creating the Internal Virtual Server.


892485-3 : A wrong OCSP status cache may be looked up and re-used during SSL handshake.

Component: Local Traffic Manager

Symptoms:
A wrong OCSP status entry in SessionDB is returned during a cache lookup due to using a wrong input parameter - certificate serial number. The result is wrong OCSP status is used in the SSL handshake.

Conditions:
If OCSP object is configured in a clientSSL or serverSSL profile.

Impact:
A wrong OCSP status may be reported in the SSL handshake.


892445-1 : BWC policy names are limited to 128 characters

Component: TMOS

Symptoms:
A 128-character limit for BWC policy object names is enforced and reports an error:

01070088:3: The requested object name <name> is invalid.

Conditions:
Attempting to create a BWC policy object with a name longer than 128 characters.

Impact:
Unable to create BWC policy objects with names that have more than 128 characters.

Workaround:
Use fewer than 128 characters when creating a BWC policy.


891613-2 : RDP resource with user-defined address cannot be launched from webtop with modern customization

Component: Access Policy Manager

Symptoms:
RDP resource with a user-defined address cannot be launched from the webtop when configured with modern customization.

After requesting the RDP file for a remote address, the RDP file fails to download and the system reports an error message:

Logon failed. Connection to your resource failed. Please click the Try Again button to try again or Close button to close this dialog.

Conditions:
-- Webtop with modern customization.
-- RDP resource with a user-defined address is assigned to the webtop.

Impact:
Cannot use remote desktop resource with user-defined addresses.

Workaround:
As the problem is with modern access policy with modern webtop, a quick workaround:

1. Create a standard access policy with standard webtop (it is similar to modern access policy and modern webtop):

-- 1.1 GUI: Access :: Profiles / Policies :: Create :: {choose Customization Type as 'Standard').
-- 1.2 GUI: Access :: Webtops :: Create :: {choose Customization Type as 'Standard').

Recreate similar access policy as modern access policy that is showing this problem.

If manually re-creating similar standard access policy is not possible, there is no workaround.


891373-1 : BIG-IP does not shut a connection for a HEAD request

Component: Local Traffic Manager

Symptoms:
When an HTTP request contains the 'Connection: close' header, the BIG-IP system shuts the TCP connection down. If a virtual server has a OneConnect profile configured, the BIG-IP system fails to close the connection for HEAD requests disregarding a client's demand.

Conditions:
-- A virtual server has HTTP and OneConnect profiles.
-- An HTTP request has the method HEAD and the header 'Connection: close'.

Impact:
Connection remains idle until it expires normally, consuming network resources.

Workaround:
None.


891221-1 : Router bgp neighbor password CLI help string is not helpful

Component: TMOS

Symptoms:
Unable to confirm the supported encryption types.

enable or add BGP routing prorotol to a route domain
imish >> enable >> conf t >> router bgp 20065004 >> neighbor 1.2.3.4 password ?

b7000.lab[0](config-router)#neighbor 1.1.1.1 password ?
  WORD Encryption Type or the password

Conditions:
Configuring the bgp neighbor with encryption password.

Impact:
Unable to confirm the supported encryption types.

Workaround:
None.


891181-1 : Wrong date/time treatment in logs in Turkey/Istambul timezone

Component: Application Security Manager

Symptoms:
There is mismatch between server and GUI timezone treatment for Turkey/Istambul timezone.

Conditions:
User sets Turkey/Istambul timezone on BIG-IP

Impact:
When filtering logs by time period, results differ from set period by an hour

Workaround:
Define time period one hour earlier for filtering ASM logs


891145-6 : TCP PAWS: send an ACK for half-open connections that receive a SYN with an older TSVal

Component: Local Traffic Manager

Symptoms:
SYNs received with TSVal <= TS.Recent are dropped without sending an ACK in FIN-WAIT-2 state.

Conditions:
-- Timestamps are enabled in TCP profile.
-- Local TCP connection is in FIN-WAIT-2 state.
-- Remote TCP connection abandoned the flow.
-- A new TCP connection sends a SYN with TSVal <= TS.Recent to the local connection.

Impact:
The new TCP connection cannot infer the half-open state of Local TCP connections, which prevents faster recovery of half-open connections. The local TCP connection stays around for a longer time.

Workaround:
There are two workarounds:

-- Reduce the Fin Wait 2 timeout (the default: 300 sec) so that TCP connection is terminated sooner.

-- Disable TCP Timestamps.


890881-5 : ARP entry in the FDB table is created on VLAN group when the MAC in the ARP reply differs from Ethernet address

Component: Local Traffic Manager

Symptoms:
Traffic drop occurs.

Conditions:
Source MAC in the ARP header and the Ethernet header do not match.

Impact:
The BIG-IP system drops these packets.

Workaround:
None.


890825-1 : Attack Signatures and Threat Campaigns filter incorrect behaviour

Component: Application Security Manager

Symptoms:
When removing not last selected values in Systems or Tags filter, last one is removed.

Conditions:
Select several values in Systems or Tags filter and then remove not the last value.

Impact:
Filter incorrectly displayed.

Workaround:
None.


889165-4 : "http_process_state_cx_wait" errors in log and connection reset

Component: Local Traffic Manager

Symptoms:
Large POST requests are getting occasionally reset and you see the following in /var/log/ltm:

err tmm[19279]: 011f0007:3: http_process_state_cx_wait - Invalid action:0x100011 clientside

Conditions:
-- An HTTP iRule is configured on a virtual server
-- A large POST request arrives on the virtual server

Impact:
Possible connection failure.


889029-1 : Unable to login if LDAP user does not have search permissions

Component: TMOS

Symptoms:
A user is unable to log in using remote LDAP.

Conditions:
-- BIG-IP systems are configured to use LDAP authentication.
-- Remote user has no search permissions on directory

Impact:
Authentication does not work.

Workaround:
Grant search permissions to the user in LDAP.


888869-1 : GUI reports General Database Error when accessing Instances Tab of SSL Certificates

Component: TMOS

Symptoms:
A General Database Error message is shown when you click the Instances tab of a certificate bundle / certificate / Key listed under the System :: Certificate Management : Traffic Certificate Management : SSL Certificate List.

Conditions:
-- The selected SSL Certificate does not have a certificate or key listed under it.
-- You click the instances tab of the properties page of the SSL Certificate.

Impact:
GUI shows an error screen.

Workaround:
Avoid clicking the instance tab if there is no key or certificate associated with the SSL Certificate / Bundle.


888517-1 : Network Driver Abstraction Layer (NDAL) busy polling leads to high CPU.

Component: Local Traffic Manager

Symptoms:
Tmm is running at 100% CPU even under light network load. The 'tmctl tmm/ndal_tx_stats' command shows a high number of packet drops. The 'tmctl tmm/ndal_tx_stats' indicates a large number of queue full events.

Conditions:
-- BIG-IP Virtual Edition.
-- There are underlying network performance issues causing the transmit queue to be full (e.g., a non-SR-IOV virtual machine environment).
-- Upgrading from BIG-IP v12.x to BIG-IP v14.x.

Impact:
NDAL's busy polling runs the tmm CPU usage to 100%.

Workaround:
Correct the underlying networking/virtualization issue.


888341-8 : HA Group failover may fail to complete Active/Standby state transition

Component: TMOS

Symptoms:
After a long uptime interval (i.e., the sod process has been running uninterrupted for a long time), HA Group failover may not complete despite an HA Group score change occurring. As a result, a BIG-IP unit with a lower HA Group score may remain as the Active device.

Note: Uptime required to encounter this issue is dependent on the number of traffic groups: the more traffic groups, the shorter the uptime, e.g.:

-- 1 floating traffic group: 2485~ days.
-- 2 floating traffic groups: 1242~ days.
-- 4 floating traffic groups: 621~ days.
-- 8 floating traffic groups: 310~ days.
-- 9 floating traffic groups: 276~ days.

Note: You can confirm sod process uptime in tmsh:

# tmsh show /sys service sod

Conditions:
HA Group failover configured.

Note: No other failover configuration is affected except for HA Group failover, specifically, these are not affected:

 o VLAN failsafe failover.
 o Gateway failsafe failover.
 o Failover triggered by loss of network failover heartbeat packets.
 o Failover caused by system failsafe (i.e., the tmm process was terminated on the Active unit).

Impact:
HA Group Active/Standby state transition may not complete despite HA Group score change.

Workaround:
There is no workaround.

The only option is to reboot all BIG-IP units in the device group on a regular interval. The interval is directly dependent on the number of traffic groups.


888289-7 : Add option to skip percent characters during normalization

Component: Application Security Manager

Symptoms:
An attack signature is not detected.

Conditions:
-- The payload is filled with the percent character in between every other character.
-- The bad unescape violation is turned off.
-- The illegal metacharacter violation is turned off.

Impact:
An attack goes undetected.

Workaround:
Turn on the bad unescape violation or the metacharacter violation.


888081-5 : BIG-IP VE Migration feature fails for 1NIC

Component: TMOS

Symptoms:
When a saved UCS is attempted to be restored in a new BIG-IP Virtual Edition (VE) in order to migrate the configuration, it fails.

load_config_files[28221]: "/usr/bin/tmsh -n -g -a load sys config partitions all " - failed. -- 01071412:3: Cannot delete IP (x.x.x.x) because it is used by the system config-sync setting.

Conditions:
The UCS load step might fail if the DB variable Provision.1NicAutoconfig is set to disable.

Impact:
The UCS restore fails.

Workaround:
The DB variable can be set to enable before loading the UCS.

# tmsh modify sys db provision.1nicautoconfig value enable


887681-4 : Tmm SIGSEGV in rrset_array_lock,services/cache/rrset.c

Component: Global Traffic Manager (DNS)

Symptoms:
TMM Cored with SIGSEGV.

Conditions:
N/A.

Impact:
Traffic disrupted while tmm restarts.


887625-4 : Note should be bold back, not red

Component: Application Security Manager

Symptoms:
Under Session Hijacking :: Device Session Hijacking by Device ID Tracking, the note text below the 'enable' checkbox is shown in bold red color

Note : Device-ID mode must be configured in bot profile for this option to work.

Conditions:
This always occurs.

Impact:
The Note does not indicate a hazardous situation (as might be implied by the color), so the text should be black instead of red.

Workaround:
None.


887621-3 : ASM virtual server names configuration CRC collision is possible

Component: Application Security Manager

Symptoms:
A policy add/modify/delete fails with the following error:

-- crit g_server_rpc_handler_async.pl[19406]: 01310027:2: ASM subsystem error (asm_config_server.pl ,F5::ASMConfig::Handler::log_error_and_rollback): Failed on insert to DCC.VS_RAMCACHE (DBD::mysql::db do failed: Duplicate entry '375946375' for key 'PRIMARY').

Conditions:
This can occur when adding a policy. The chance of it occurring increases when there are many virtual servers.

Impact:
Every config update fails.

Workaround:
Figure out which virtual servers have the CRC collision (by looking into DCC.RAMCACHE_VS). Change the name of one of these virtual servers.

You can get the name of the affected virtual server by using the entry reported in the 'Duplicate entry' log, and running this command.

mysql -u root -p$(perl -MPassCrypt -nle 'print PassCrypt::decrypt_password($_)' /var/db/mysqlpw) -e 'SELECT * FROM DCC.VS_RAMCACHE WHERE vs_name_crc = 375946375'


887609-6 : TMM crash when updating urldb blacklist

Component: Traffic Classification Engine

Symptoms:
TMM crashes after updating the urldb blacklist.

Conditions:
-- The BIG-IP system is configured with URL blacklists.
-- Multiple database files are used.

Impact:
TMM restarts. Traffic disrupted while tmm restarts.

Workaround:
None.


887265-3 : BIG-IP may fail to come online after upgrade with ASM and VLAN-failsafe configuration

Component: Application Security Manager

Symptoms:
When booting to a boot location for the first time, the system does not come on-line.

Conditions:
-- There is a large ASM configuration.
-- VLAN failsafe is configured, and the failsafe-action is something other than failover.
-- The BIG-IP system is an appliance.

Impact:
BIG-IP processes continually restart (vlan failsafe-action failover-restart-tm) or the BIG-IP system continually reboots (vlan failsafe-action reboot)

Workaround:
Either disable VLAN failsafe or set the failsafe-action to failover during an upgrade.


887205-1 : Correct handling of wildcard parameters with search-in 'any' marked for data integrity

Component: Fraud Protection Services

Symptoms:
The Data Integrity feature does not work for wildcard parameters with search-in set to 'any'.

Conditions:
-- Configure a wildcard parameter with search-in 'any' and mark it for data integrity.
-- Send traffic containing multiple parameters that match the configured pattern.

Impact:
-- Only the first traffic parameter matched by wildcard pattern will be checked for Data Integrity.
-- No alerts will be triggered for other parameters matched by same pattern even if they were manipulated.

Workaround:
Use explicit parameters.
Use wildcard parameters only if each pattern should match only one traffic parameter.


887117-3 : Invalid SessionDB messages are sent to Standby

Component: TMOS

Symptoms:
SessionDB messages sent from Active to Standby are dropped due to inconsistencies detected in the message. You see logs in /var/log/ltm:

SessionDB ERROR: received invalid or corrupt HA message; dropped message.

Conditions:
-- High availability (HA) pair configuration.
-- SessionDB messages sent from Active to Standby.

Impact:
Standby drops these messages

Workaround:
None.


887089-2 : Upgrade can fail when filenames contain spaces

Component: TMOS

Symptoms:
Filenames with spaces in /config directory can cause upgrade/UCS load to fail because the im upgrade script that backs up the config, processes the lines in a file spec using white space characters. The number of spaces in the filename is significant because it determines how the process separates the name into various fields, including a path to the file, an md5sum, and some file properties (notably size). If the path contains white space, when the upgrade/UCS load process attempts to use a field, the operation encounters a value other than what it expects, so the upgrade/UCS load fails.

The file's content is also significant because that determines the md5sum value.

Although rarely occurring, a tangential issue exists when the sixth word is a large number. The sixth field is used to determine the amount of space needed for the installation. When the value is a very large number, you might see an error message at the end of the upgrade or installation process:

Not enough free disk space to install!

Conditions:
Filenames with spaces in /config directory.

Impact:
Upgrade or loading of UCS fails.

Workaround:
Remove the spaces in filenames and try the upgrade/UCS load again.


887045-2 : The session key does not get mirrored to standby.

Component: Local Traffic Manager

Symptoms:
When a session variable key length is 65 KB, session mirroring fails for that specific key.

Conditions:
-- APM high availability (HA) setup.
-- Access Policy is configured and synced across both devices.
-- A session variable key of ~65 KB arrives

Impact:
The session key does not get mirrored to standby.

Workaround:
None


886693-4 : System may become unresponsive after upgrading

Component: TMOS

Symptoms:
After upgrading, the system encounters numerous issues:

-- Memory exhaustion (RAM plus swap) with no particular process consuming excessive memory.
-- High CPU usage with most cycles going to I/O wait.
-- System is unresponsive, difficult to log in, slow to accept commands.
-- Provisioning is incomplete; there is a small amount of memory amount assigned to 'host' category.

Conditions:
-- The configuration works in the previous release, but does not work properly in the release you are upgrading to.
-- Device is upgraded and the configuration is rolled forward.
-- There may be other conditions preventing the configuration from loading successfully after an upgrade.

Exact conditions that trigger this issue are unknown. In the environment in which it occurred, a datagroup had been deleted, but an iRule was still referencing it, see https://cdn.f5.com/product/bugtracker/ID688629.html

Impact:
-- System down, too busy to process traffic
-- Difficulty logging in over SSH might require serial console access.

Workaround:
Reboot to an unaffected, pre-upgrade volume.

-- If the system is responsive enough, use 'tmsh reboot volume <N>' on BIG-IP Virtual Edition (VE) or switchboot to select an unaffected volume.

-- If the system is completely unresponsive, physically powercycle a physical appliance or reboot a VE from an applicable management panel, then select an unaffected volume from the GRUB menu manually.

Note: This requires that you have console access, or even physical access to the BIG-IP device if you are unable to SSH in to the unit. On a physical device, a non-responsive system might require that you flip the power switch. For more information, see K9296: Changing the default boot image location on VIPRION platforms :: https://support.f5.com/csp/article/K9296, K5658: Overview of the switchboot utility :: https://support.f5.com/csp/article/K5658, and K10452: Overview of the GRUB 0.97 configuration file :: https://support.f5.com/csp/article/K10452.


886649-1 : Connections stall when dynamic BWC policy is changed via GUI and TMSH

Component: TMOS

Symptoms:
Connections stall when dynamic BWC policy is changed via GUI and TMSH.

Conditions:
Issue is seen when you have a dynamic bandwidth control policy configured, and you make a change to the policy via the GUI and TMSH.

Impact:
Connection does not transfer data.

Workaround:
Restart TMM. Delete the relevant configuration, create a new configuration, and apply it.


886273-4 : Unanticipated restart of TMM due to heartbeat failure

Component: TMOS

Symptoms:
A tmm thread might stall while yielding the CPU, and trigger a failsafe restart of the tmm process. A core file might be generated without any message logged in /var/log/*.

Conditions:
The conditions under which this occurs are unknown.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None known.


886145-1 : The 'Reconnect' and 'Reconnect All' buttons do not work if reached via a particular section of the DNS GUI.

Component: Global Traffic Manager (DNS)

Symptoms:
The 'Reconnect' and 'Reconnect All' buttons (introduced in BIG-IP version 14.1.0 to restart some or all iQuery connections) do not work when clicked.

The 'Reconnect' button does not become enabled when a server is selected from the list, and an error is logged in the browser console.

The 'Reconnect All' button is clickable but returns the error when clicked:
No response action specified by the request.

Conditions:
You have accessed the buttons via the following GUI path:

DNS :: GSLB :: Data Centers :: [dc name] > Servers

Impact:
The buttons do not work, making the corresponding feature unavailable from the GUI.

Workaround:
Access the buttons using the following alternative GUI path:

DNS :: GSLB :: Servers


886045-1 : Multi-NIC instances fail to come up when trying to use memory-mapped virtio device

Component: Local Traffic Manager

Symptoms:
Multi-NIC instances fail to come up while using memory-mapped virtio device.

Running the command 'lspci -s <pci-id> -vv' results in the 'region' field reporting 'Memory at xxxxx'.

Conditions:
TMM crashes as soon as the BIG-IP system tries to come up.

Impact:
The BIG-IP system fails to attach to the underlying virtio devices.

Workaround:
Switch to the sock driver by overriding tmm_init.tcl.

For instructions on how to enable the sock driver, see the workaround in K74921042: BIG-IP VE may fail to process traffic after upgrading the VMware ESXi 6.7 host to Update 2 (or later), available at https://support.f5.com/csp/article/K74921042.


885325-1 : Stats might be incorrect for iRules that get executed a large number of times

Component: Local Traffic Manager

Symptoms:
iRules that execute a lot can make stats counters large enough to overflow in a relatively short amount of time (e.g., a couple of months).

Conditions:
Execute an iRule a lot (e.g., make the total number of executions greater than 32 bits) and check its stats.

Impact:
After the total number exceeds 32 bits, the counter stats are no longer valid.

Workaround:
None.


885201-1 : BIG-IP DNS (GTM) monitoring: 'CSSLSocket:: Unable to get the session"'messages appearing in gtm log

Component: Global Traffic Manager (DNS)

Symptoms:
Err (error) level messages in /var/log/gtm log when DNS (GTM) SSL monitors such as https are used and are unable to connect to the monitored target IP address:

err big3d[4658]: 01330014:3: CSSLSocket:: Unable to get the session.

These messages do not indicate the IP address or port of the target that failed to connect, and this ambiguity may cause concern.

Conditions:
-- SSL-based DNS (GTM) monitor assigned to a target, for example https
-- TCP fails to connect due to a layer 2-4 issue, for example:
   - No route to host.
   - Received a TCP RST.
   - TCP handshake timeout.

Impact:
The system reports unnecessary messages; the fact that the monitor failed is already detailed by the pool/virtual status change message, and the target changing to a red/down status.

These messages can be safely ignored.

Workaround:
If you want to suppress these messages, you can configure a syslog filter.

For more information, see K16932: Configuring the BIG-IP system to suppress sending SSL access and request messages to remote syslog servers :: https://support.f5.com/csp/article/K16932.


884729-1 : The vCMP CPU usage stats are incorrect

Component: TMOS

Symptoms:
The vCMP CPU usage stats are incorrect when process on a secondary blade has the same PID as that of primary blade's qemu process.

Conditions:
A process on a secondary blade has the same PID as that of primary blade's qemu process.

Impact:
The vCMP CPU usage stats are intermittently incorrect.

Workaround:
None.


883577-5 : ACCESS::session irule command does not work in HTTP_RESPONSE event

Component: Access Policy Manager

Symptoms:
When ACCESS::session irule is used in HTTP_RESPONSE event, the APM session creation fails with the following log in /var/log/ltm

No HTTP data available - command unsupported in event (line XX)session creation failed - Operation not supported (line XX)

Conditions:
Using ACCESS::session create command under HTTP_RESPONSE.

Impact:
Cannot create APM session using the ACCESS::session irule command.

Workaround:
The same irule ACCESS::session can be used under HTTP_REQUEST to create the APM session.


883149-2 : The fix for ID 439539 can cause mcpd to core.

Component: TMOS

Symptoms:
Mcpd cores during config sync.

Conditions:
This has only been observed once. The device was going from standby to active, and the connection between the BIG-IP peers stalled out.

Impact:
Mcpd cores. Traffic disrupted while mcpd restarts.

Workaround:
NA


883049-1 : Statsd can deadlock with rrdshim if an rrd file is invalid

Component: Local Traffic Manager

Symptoms:
-- RRD graphs are not updated.
-- System statistics are stale.
-- Commands such as 'tmsh show sys memory' may not complete.
-- qkview does not complete, as it runs "tmsh show sys memory'.

You may see errors:

-- err statsd[5005]: 011b0600:3: Error ''/var/rrd/endpisession' is too small (should be 15923224 bytes)' during rrd_update for rrd file '/var/rrd/endpisession'.
-- err statsd[5005]: 011b0600:3: Error '-1' during rrd_update for rrd file '/var/rrd/endpisession'.

Conditions:
Truncation of a binary file in /var/rrd.

Impact:
Stats are no longer collected. Statsd and rrdshim deadlock.

Workaround:
Remove the truncated file and restart statsd:
bigstart restart statsd


882833-1 : SELinux issue cause zrd down

Component: TMOS

Symptoms:
After upgrading BIG-IP software, zrd fails to start.

There are errors in /var/log/daemon.log:

err named[19356]: open: /config/named.conf: permission denied

Conditions:
This can occur after upgrading, for example, when upgrading from version 14.1.0.6 to 15.0.1.1.

Impact:
DNS service disrupted as zrd fails to start after reboot.

Workaround:
Run the following command after upgrading:

restorecon -rF /var/named/


882729-4 : Applied Blocking Masks discrepancy between local/remote event log

Component: Application Security Manager

Symptoms:
Applied Blocking Masks discrepancy between local/remote event log, ASM logging event logs both locally and remotely to BIG-IQ has discrepancy.

Conditions:
This occurs when "Applied Blocking Masks" logs are emitted on a device where local and remove event logging is configured.

Impact:
This is cosmetic but can lead to confusion.


882713-2 : BGP SNMP trap has the wrong sysUpTime value

Component: TMOS

Symptoms:
The timestamp value of sysUpTime in SNMP traps reported by BGP is incorrect.

Conditions:
BGP connection with a peer flaps, and sends traps for the following:
bgpSnmpNotifyEstablished
bgpSnmpNotifyBackwardTransition

Impact:
The sysUpTime in the trap generated by BGP is incorrect.

Workaround:
None.


882709-5 : Traffic does not pass on tagged VLANs on VE configured on Hyper-V hypervisors in this release

Component: Local Traffic Manager

Symptoms:
In this release, traffic does not pass on tagged VLANs when a BIG-IP Virtual Edition (VE) is deployed on a Hyper-V hypervisor.

This may manifest as traffic failing after an upgrade from earlier (unaffected) software versions.

Note: This functionality worked as expected in v13.x and earlier, and if the same VE is downgraded to v13.x, VLAN tagging functionality is restored.

This is due to an interoperability issue between RedHat Enterprise Linux (RHEL) and Microsoft Hyper-V, which seems to affect RHEL v7.3 and RHEL v7.5.

Hyper-V on Windows Server 2016 and Windows Server 2012 do not seem to identify the version of the built-in LIS correctly on Centos 7.3 or Centos 7.5 (which are built on RHEL 7.3 and RHEL 7.5 respectively).

Although there is a statement of support by Microsoft for VLAN tagging on RHEL 7.3 and 7.5 when running on Hyper-V, that functionality does not appear to work at present: Supported CentOS and Red Hat Enterprise Linux virtual machines on Hyper-V :: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/Supported-CentOS-and-Red-Hat-Enterprise-Linux-virtual-machines-on-Hyper-V.

Conditions:
-- BIG-IP VE is deployed on a Hyper-V hypervisor.
-- VLAN configured in BIG-IP VE with tagged interfaces, e.g.:

    net vlan external {
        interfaces {
            1.1 {
                tagged
            }
        }
        tag 4000
    }

-- At present, VLAN tagging on the v14.x and v15.x releases does not work because those releases are running on CentOS 7.3 and 7.5 respectively, which both are affected by the MS/RHEL interoperability issue.

-- BIG-IP v12.x and v13.x use a different (older) CentOS version, so VLAN tagging works without issue on those releases.

Impact:
-- The system does not prevent you from configuring tagged VLANs, even though they do not pass traffic.

-- Although upgrades complete and you can reboot into the new boot location (or you can set up on Hyper-V from scratch), traffic does not pass (into the guest) across VLANs that are tagged.

Important: If using tagged VLANs on VE setups on Hyper-V is critical to your configuration, you might want to elect to postpone upgrading from a working, v12.x and v13.x release.

Workaround:
Essentially, there is no workaround in this release; you must reconfigure the virtual machine to use separate, untagged interfaces for each VLAN.

Note: Although this is technically a problem between Hyper-V and the built-in LIS on RHEL 7.3/7.5, this issue is being tracked internally in this bug.


882609-2 : ConfigSync status remains 'Disconnected' after setting ConfigSync IP to 'none' and back

Component: TMOS

Symptoms:
After setting a device's ConfigSync IP to 'none' and then back to an actual IP address, the device remains in a disconnected state, and cannot establish ConfigSync connections to other BIG-IP systems in its trust domain.

MCPD periodically logs messages in /var/log/ltm:
err mcpd[27610]: 0107142f:3: Can't connect to CMI peer a.b.c.d, TMM outbound listener not yet created.

Conditions:
--- BIG-IP system is in a trust domain with other BIG-IP systems.
--- Local device's ConfigSync IP is set to 'none', and then back to an actual IP address.

Impact:
Devices unable to ConfigSync.

Workaround:
This workaround will disrupt traffic while TMM restarts:

1. Ensure the local ConfigSync IP is set to an IP address.
2. Restart TMM:
bigstart restart tmm


This workaround should not disrupt traffic:

Copy and paste the following command into the Advanced Shell (bash) on a BIG-IP system, and then run it. This sets the ConfigSync IP for all device objects to 'none', and then back to their correct values.

TMPFILE=$(mktemp -p /var/tmp/ ID882609.XXXXXXX); tmsh -q list cm device configsync-ip > "$TMPFILE"; sed 's/configsync-ip .*$/configsync-ip none/g' "$TMPFILE" > "$TMPFILE.none"; tmsh load sys config merge file "$TMPFILE.none"; echo "reverting back to current"; tmsh load sys config merge file "$TMPFILE"


882549-1 : Sock driver does not use multiple queues in unsupported environments

Component: Local Traffic Manager

Symptoms:
In some unsupported environments, the underlying sock driver uses only only 1 queue. You can confirm whether it does so by executing the tmsh command to check the rxq column (which shows 0):
tmctl -d blade -i tmm/ndal_rx_stats' and

You can verify this on the tx side as well.

Conditions:
This occurs in certain unsupported environments.

Note: When you run 'ethtool -l', you can see: 'command not supported'.

Impact:
When multi-q is present, the use of single queue can impact performance when using the sock driver.

Workaround:
Use other available drivers.

You can check the available drivers by executing the tmsh command:
tmctl -d blade -i tmm/device_probed


881085-4 : Intermittent auth failures with remote LDAP auth for BIG-IP managment

Component: TMOS

Symptoms:
There are intermittent auth failures when accessing the BIG-IP administration interfaces via SSH or the GUI.

Conditions:
-- Remote LDAP auth is configured.
-- An idle timeout RST is received on the LDAP connection before the configured auth LDAP idle-timeout expires. This RST might be generated by tmm (if the connection to the LDAP server is via a defined VLAN), some other intervening device on the network, or from the LDAP server itself (depending on its connection time limit).

Impact:
There might be intermittent remote-auth failures.

Workaround:
Set the auth ldap idle-timeout to a smaller value, for example, via tmsh:
modify auth ldap system-auth idle-timeout 299


881065-3 : Adding port-list to Virtual Server changes the route domain to 0

Component: Local Traffic Manager

Symptoms:
When attaching the port-list to virtual server dest:port-list, the route domain of the virtual server is changed to the default value of 0, and the port-list is not correctly applied. This is encountered in the GUI but not in the CLI.

Conditions:
Using port-list along with virtual server in non default route domain using the GUI.

Impact:
You are unable to use the GUI to attach a port-list that uses a non-default route domain to a virtual server.

Workaround:
Use tmsh to attach a port-list to a virtual server if the port-list uses a non-default route domain.


880289-2 : FPGA firmware changes during configuration loads

Component: TMOS

Symptoms:
FPGA firmware on DDoS Hybrid Defender products might be changed unexpectedly during a configuration load or license update.

Conditions:
Configuration load or license update.

Impact:
FPGA firmware changes unexpectedly, reboot might be required to stabilize.

Workaround:
None.


879969-6 : FQDN node resolution fails if DNS response latency >5 seconds

Component: TMOS

Symptoms:
When resolving FQDN names for FQDN nodes/pool members, pending DNS requests are timed out after 5 seconds with no response from the DNS server.
If there is a persistent latency of 5 seconds or greater in the DNS server responses, FQDN name resolution will fail and ephemeral nodes/pool members will not be created.

Conditions:
- BIG-IP using FQDN nodes/pool members
- Persistent latency of 5 seconds or greater in the DNS server responses

Impact:
Ephemeral pool members may not be created, thus no traffic will be sent to the intended pool members.

Workaround:
Resolve any persistent latency issues that might cause delays of 5 seconds or more in DNS server responses.


879829-1 : HA daemon sod cannot bind to ports numbered lower than 1024

Component: TMOS

Symptoms:
If the network high availability (HA) daemon sod is configured to use a port number that is lower than 1024, the binding fails with a permission-denied error. This affects binding to ports on both management and self IP addresses.

Example log messages:
/var/log/ltm
err sod[2922]: 010c003b:3: bind fails on recv_sock_fd addr 1.2.3.4 port 1023 error Permission denied.
notice sod[2992]: 010c0078:5: Not listening for unicast failover packets on address 1.2.3.4 port 1023.

/var/log/auditd/audit.log
type=AVC msg=audit(1578067041.047:17108): avc: denied { net_bind_service } for pid=2922 comm="sod" capability=10 scontext=system_u:system_r:f5sod_t:s0 tcontext=system_u:system_r:f5sod_t:s0 tclass=capability

Conditions:
-- high availability (HA) daemon sod is configured to use a port lower than 1024 for network high availability (HA) operations.

-- Version 13.1.0 or later.

Impact:
A network high availability (HA) connection configured to use a port number lower than 1024 on an affected version does not function.

Workaround:
Change the port number to 1024 or higher.

Note: UDP port 1026 is the default.


879189-4 : Network map shows 'One or more profiles are inactive due to unprovisioned modules' in Profiles section

Component: TMOS

Symptoms:
Network map shows error message: One or more profiles are inactive due to unprovisioned modules.

Conditions:
-- ASM provisioned.
-- A profile is attached to a virtual server, but the module supporting the profile is not provisioned.

Impact:
The Network Map shows an error message.

Workaround:
Provision the module that supports the profile.


879169-1 : RESOLV::lookup @<virtual server name> may not work

Component: Local Traffic Manager

Symptoms:
In v13 later, iRule command RESOLV::lookup @<vs name> does not work

Conditions:
The virtual server targeted by the RESOLV::lookup command is not configured with IP protocol UDP ("ip-protocol udp" in TMSH)

Impact:
The DNS virtual is working while iRule RESOVE::lookup does not send request to the virtual.

Workaround:
Either of these:

1. Modify the target virtual server to specify an IP protocol of UDP

2. Replace the name with IP address to workaround the issue.
set hostip [RESOLV::lookup @198.51.100.1 -a $hostname]


873249-6 : Switching from fast_merge to slow_merge can result in incorrect tmm stats

Component: Local Traffic Manager

Symptoms:
TMM stats are reported incorrectly. For example, the system may report double the number of running TMMs or an incorrect amount of available memory.

Conditions:
Changing the DB key merged.method from fast_merge to slow_merge.

Impact:
Incorrect reporting for TMM stats.

Workaround:
Remove the file /var/tmstat/cluster/blade0-performance.

These files are roll-ups and will be re-created as necessary.


872981-4 : MCP crashes when deleting a virtual server and its traffic-matching-criteria in the same transaction

Component: Local Traffic Manager

Symptoms:
MCPD crashes when deleting a virtual server and traffic-matching-criteria in the same transaction. This can happen when explicitly using a transaction, or when using a feature that uses transactions, such as when deleting an iApp instance that created these objects.

Conditions:
-- Using a virtual server that has traffic-matching-criteria (e.g., port lists or address lists) attached.
-- Deleting the virtual server and its traffic-matching-criteria in the same transaction.

Impact:
MCP cores, which causes a failover (in a high availability (HA) system) or temporary outage.

Workaround:
Delete the traffic-matching-criteria object separately from the virtual server.


871705-7 : Restarting bigstart shuts down the system

Component: TMOS

Symptoms:
The 'bigstart restart bigstart' command shuts down the system without displaying or informing the BIG-IP system user that this command can interrupt service. The system goes directly to the inoperative state as soon as the command is run.

Conditions:
-- Running the command bigstart restart bigstart.
-- Running 'systemctl restart systemd-bigstart' twice.

Impact:
Different versions appear to have different behavior:

-- v12.1.5: shell hangs on bigstart command, but the BIG-IP system stays Active.
-- v13.1.0.7: The BIG-IP system goes inoperative upon 'bigstart restart bigstart'.
-- 1v4.1.2.3: The 'bigstart restart bigstart' command cannot find the 'bigstart' service, but 'systemctl restart systemd-bigstart' shows this behavior.

Workaround:
None.


870349-2 : Continuous restart of ntlmconnpool after license reinstall

Component: Local Traffic Manager

Symptoms:
The ntlmconnpool process continuously restarts after reinstalling the licence. The system reports a message in the BIG-IP console:
Re-starting ntlmconnpool.

Conditions:
This occurs when you upgrade your license such that the new license changes the number of TMMs available.

Impact:
System requires reboot, and reports 'Re-starting ntlmconnpool' message continuously in the BIG-IP console.

Workaround:
You must reboot to clear the condition. Once the system comes back up, it operates as expected.


870309-3 : Ephemeral pool member not created when FQDN resolves to new IP address

Component: Local Traffic Manager

Symptoms:
On rare occasions, when using FQDN nodes/pool members and the FQDN name resolves to a different IP address, the ephemeral pool member for the old IP address may be removed, but a new ephemeral pool member for the new IP address may not be created.

Under normal operation, the following sequence of messages is logged in /var/log/dynconfd.log when dynconfd logging is set to 'debug' level:

[D]: setFQDNPoolMembersModified: pool /Common/my_fqdn_pool node /Common/my_fqdn_node fqdn my.fqdn.com
[D]: PoolMember::scan: pool /Common/my_fqdn_pool member /Common/my_fqdn_node fqdn my.fqdn.com

But when this problem occurs, the 'setFQDNPoolMembersModified' log message is not followed by a 'PoolMember::scan' log message:

[D]: setFQDNPoolMembersModified: pool /Common/my_fqdn_pool node /Common/my_fqdn_node fqdn my.fqdn.com

Conditions:
This may occur under rare timing conditions while using using FQDN nodes/pool members, when the DNS server resolves the FQDN name to a different IP address.

Impact:
Pools configured with FQDN-based pool members may become empty, in which case no traffic will be processed by that pool.

Workaround:
To recover from this condition once it occurs, perform either of the following actions:

-- Restart the dynconfd daemon:
bigstart restart dynconfd

This temporarily interrupts queries for FQDN name resolution and updates (deletion/creation) of ephemeral nodes/pool members in response to FQDN resolution changes.

This action is not otherwise expected to affect traffic currently flowing to pools.


-- Remove the FQDN pool member, then re-add the FQDN pool member back to the pool:
tmsh modify ltm pool my_fqdn_pool { members delete { my_fqdn_node:port } }
tmsh modify ltm pool my_fqdn_pool { members add { my_fqdn_node:port <other parameters> } }

If the pool already has no ephemeral pool members, this has no effect on traffic (which is already not flowing to this pool).

If the pool has some ephemeral pool members but not the complete list of expected ephemeral members, this will interrupt traffic flowing to this pool while there are no pool members present.

In that case, temporarily adding at least one pool member with a statically-configured IP address before removing the FQDN pool member, then removing the same temporary pool members after replacing the FQDN pool member, allow straffic to continue flowing to the pool while this action is performed.


869565-2 : Disabling of HTTP/2 profile on server side does not prevent h2 in ALPN

Component: Local Traffic Manager

Symptoms:
HTTP/2 protocol can be negotiated with the Application-Layer Protocol Negotiation (ALPN) on the Transport Layer Security (TLS) level of communication. When an iRule disables HTTP/2 on a server side, it is assumed that the BIG-IP system no longer offers h2 to a server as an option.

Conditions:
-- A virtual server has an HTTP/2 profile configured on both the client and server sides.
-- A server SSL profile is configured on the virtual server.
-- An iRule using the 'HTTP2::disable serverside' command is attached to the virtual server.

Impact:
The BIG-IP system offers h2 as an option in ALPN when the HTTP/2 profile is disabled on a server side. If h2 is accepted by the server, communication fails since HTTP/2 is disabled and does not decode HTTP/2 traffic.

Workaround:
None.


869553-2 : HTTP2::disable fails for server side allowing HTTP/2 traffic

Component: Local Traffic Manager

Symptoms:
The BIG-IP system provides an iRule command 'HTTP2::disable serverside' to put http2 in passthrough mode. When the command is called during the CLIENT_ACCEPTED event, it should completely disable http2 until the end of TCP connection, or until the HTTP2::enable command is executed.

Conditions:
-- A virtual server has an HTTP/2 profile configured on the server side.
-- An iRule with an the command 'HTTP2::disable serverside' command is attached to the virtual server in the CLIENT_ACCEPTED event.

Impact:
The BIG-IP system continues to send HTTP/2 traffic to a server.

Workaround:
None.


869049-3 : Charts discrepancy in AVR reports

Component: Application Visibility and Reporting

Symptoms:
Discrepancy in AVR reports. When filtering on the 'last month' interval, a specific number of total requests per virtual server is shown. Then when filtering to the present day from a date that encompasses that month, a lower number is reported.

Conditions:
-- Number of records in database exceeds the maximum mount of data that AVR can aggregate between different table-resolutions.
-- There are metrics on the report other than the default one (hits-count).

Impact:
Stats on DB get corrupted and incorrect.

Workaround:
None.


867985-5 : LTM policy with a 'shutdown' action incorrectly allows iRule execution

Component: Local Traffic Manager

Symptoms:
BIG-IP systems provide manipulation tools over a connection with an LTM policy and/or iRule. LTM policy takes precedence over iRules and has an option to shutdown a connection based on satisfied conditions. When a connection is closing, an iRule should not be executed under the same conditions.

Conditions:
-- The BIG-IP system has a virtual server with an LTM policy and an iRule.
-- The LTM policy has action 'shutdown connection' under certain conditions.
-- The iRule has an event which is triggered under the same conditions.

Impact:
The iRule is executed before the connection is being reset.

Workaround:
None.


867777-4 : Remote syslog server cannot parse violation detail buffers as UTF-8.

Component: Application Security Manager

Symptoms:
Remote syslog server is unable to properly parse the violation detail buffers as UTF-8.

Conditions:
This occurs when the violation detail buffers contain double-byte/non-UTF characters, due to requests that contain non-ASCII UTF-8 characters.

Impact:
The syslog server cannot parse violation detail buffers as UTF-8.

Workaround:
None.


867705-5 : URL for IFRAME element may not be normalized in some cases

Component: Access Policy Manager

Symptoms:
Client JavaScript may see a non-normalized URL for the IFRAME HTML element in Portal Access.

Conditions:
- Original HTML page contains IFRAME element with relative URL
- JavaScript code reads this URL from the IFRAME element

Impact:
The URL for IFRAME element is not normalized and the web application may not work correctly in Portal Access.

Workaround:
Use an iRule to correct the returned IFRAME URL in rewritten JavaScript code. There is no generic iRule pattern; the correction depends on actual JavaScript code, but you can use the following example as a template:

when REWRITE_REQUEST_DONE {
  if { [HTTP::path] ... } { # use appropriate selection for URI
    set correct_location 1
  }
}

when REWRITE_RESPONSE_DONE {
  if {[info exists correct_location]} {
    unset correct_location
    # look for the piece of code to be corrected
    set str2find {...} # use appropriate pattern for rewritten code
    set str_len [string length $str2find]
    set strt [string first $str2find [REWRITE::payload]]

    # make replacement using appropriate corrected code
    if {$strt > 0} {
      REWRITE::payload replace $strt $str_len {...}
    }
  }
}


867549-2 : LCD touch panel reports "Firmware update in progress" indefinitely

Component: TMOS

Symptoms:
After a software upgrade that includes an LCD firmware update, the LCD touch panel may remain stuck reporting an error indefinitely / for longer than 30 minutes:
Firmware update in Progress may take up to 30 minutes.

Conditions:
This issue occurs when all of the following conditions are met:

-- You have one of the following BIG-IP platforms:
 * i850
 * i2x00
 * i4x00
 * i5x00
 * i7x00
 * i10x00
 * i11x00
 * i15x00
 * HRC-i2x00
 * HRC-i5x00
 * HRC-i10x00

-- You perform a software upgrade that updates the firmware on the LCD touch panel, e.g. upgrading from BIG-IP v13.1.x to BIG-IP v14.1.x or newer.

Impact:
The system is functional, but the LCD displays the firmware update screen indefinitely. The LCD cannot be used while it is frozen on the firmware update warning screen.

Workaround:
Important: Before attempting this workaround, check that there are no indications the system is still performing a firmware update (such as a terminal prompt), and that the following messages can be found in /var/log/ltm after the most recent boot:

notice chmand[6302]: 012a0005:5: firmware update succeeded.
notice chmand[6302]: 012a0005:5: Firmware check finished.

These messages indicates that the firmware update has finished, and the LCD is displaying the warning screen in error, so it is safe to perform the workaround.

Reboot the BIG-IP system to return the LCD to normal operation.

After a reboot of the BIG-IP operating system, the LCD touch panel should be responsive.


866957-2 : Load balancing IPsec tunnels

Component: TMOS

Symptoms:
IPsec can experience packet loss on oversubscribed TMM instances (reaching 100% CPU transiently or consistently) and other TMM instances do not share the load.

Conditions:
-- A large number of IPsec tunnels.
-- The Security Associations (SAs) associated with IPsec tunnels are not balanced across TMMs.
-- Other TMMs are less busy.

Impact:
If random assignment of IPsec tunnels to TMM instances results in one TMM needing more than 100% CPU to handle all the traffic, packets are lost. When packets are lost, they are retransmitted, and BIG-IP network performance drops in proportion to the packet loss.

Workaround:
None


866953-4 : Portal Access: F5_Inflate_onclick wrapper functionality needs refining

Component: Access Policy Manager

Symptoms:
Event handler defined on DOM elements is not executed properly, and some events on a page like onClick() are not executed properly.

Conditions:
-- Portal access enabled.
-- Rewrite enabled.
-- New value of event handler is equal to inline handler already set for the element.

Impact:
Web application does not operate as expected.

Workaround:
Use a custom iRule, for example, an iRule that redefines F5_Inflate_onclick:

Note: In the following iRule, substitute <PATH_TO_PAGE> with the page in your web application.

when REWRITE_REQUEST_DONE {
  if {
    [HTTP::path] ends_with "<PATH_TO_PAGE>"
  } {

    # log "URI=([HTTP::path])"
    # Found the file to modify

    REWRITE::post_process 1
    set do_it 1
  }
}

when REWRITE_RESPONSE_DONE {
  if {[info exists do_it]} {
    unset do_it

    set strt [string first {<script>try} [REWRITE::payload]]

    if {$strt > 0} {
      REWRITE::payload replace $strt 0 {
        <script>
          (function(){
            var ioc = F5_Inflate_onclick;

            F5_Inflate_onclick = function(o, incr, v) {
              if (v === o.onclick && typeof v === 'function') {
                return v;
              }
              return ioc.call(this,o,incr,v);
            }

          })();
        </script>
      }
    }
  }
}


865653-2 : Wrong FDB table entries with same MAC and wrong VLAN combination

Component: TMOS

Symptoms:
Forwarding DataBase (FDB) table has duplicate MAC entries with the incorrect VLANs.

MAC entries are correct in the switch but not in the control plane.

Conditions:
Enable L2Wire.

Impact:
Duplicate MAC entries with incorrect VLANs in FDB table.

Workaround:
Restart bcm56xxd:
bigstart restart bcm56xxd

Note: You can use tmsh to see the table:
tmsh -m show net fdb


865225-5 : 100G modules may not work properly in i15000 and i15800 platforms

Component: TMOS

Symptoms:
The tuning values programmed in the switch are not correct for 100G OPT-0039 and OPT-0031 SFP modules.

Conditions:
-- Using OPT-0039 or OPT-0031 modules.

-- Running on i15000 and i15800 platforms.

Note: Use 'tmsh list net interface vendor-partnum', to identify the optic modules installed.

Impact:
You might see traffic drop.

Note: Potential issues related to incorrect tuning values come from F5-internal sources and have not been reported in production configurations.

Workaround:
None.


864797-3 : Cached results for a record are sent following region modification

Component: Global Traffic Manager (DNS)

Symptoms:
Changing the contents of a topology region record may result in DNS queries temporarily being directed as if the change had not happened for queries from the IP address of the last end user client to use topology load balancing.

Conditions:
-- A client at a single IP address makes multiple queries that are load balanced using topology, both before and after a change to a topology region record, where that change also modifies the result the single client receives.

-- If a query from a different client IP address is received and load balanced using topology, then the issue is corrected until the next change to a topology region record.

Impact:
After changing the contents of a topology region record, the last end user client to send a query before the change may receive the wrong load balancing decision if the change affected that decision. Queries from other end user clients are load balanced correctly and cause the issue to go away until the next topology region record change.

Workaround:
This issue can be temporarily corrected by sending a DNS query that is load balanced using topology after making changes to region records.


863917-1 : The list processing time (xx seconds) exceeded the interval value. There may be too many monitor instances configured with a xx second interval.

Component: Global Traffic Manager (DNS)

Symptoms:
Messages similar to the following may be seen in the DNS (GTM) logs:

The list processing time (32 seconds) exceeded the interval value. There may be too many monitor instances configured with a 30 second interval.

This message was introduced in 15.0.0 as an aid to help identifying overloaded DNS (GTM) systems, but it triggers too easily and can be logged when the device is not overloaded.

Conditions:
-- DNS (GTM) servers are present.
-- Virtual servers are configured on those DNS (GTM) servers.
-- A monitor is applied to the DNS (GTM) server.

Impact:
Messages are logged that imply the system is overloaded when it is not.

Workaround:
Create a log filter to suppress the messages

sys log-config filter gtm-warn {
    level warn
    message-id 011ae116
    source gtmd
}


863601-4 : Panic in TMM due to internal mirroring interactions

Component: Wan Optimization Manager

Symptoms:
The Traffic Management Microkernel suddenly restarts due to a SIGSEGV segmentation fault.

Conditions:
-- APM is being used.
-- Connection mirroring is being used.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Avoid configuring connection mirroring when APM is being used.


862937-4 : Running cpcfg after first boot can result in daemons stuck in restart loop

Component: TMOS

Symptoms:
After running cpcfg and booting into the volume, daemons such as named and gtmd are stuck restarting. Additionally the SELinux audit log contains denial messages about gtmd and named being unable to read unlabeled_t files.

Conditions:
Running cpcfg on a volume that has already been booted into.

Impact:
Services do not come up.

Workaround:
In the bash shell, force SELinux to relabel at boot time. Then reboot:

# touch /.autorelabel
# reboot


862885-3 : Virtual server-to-virtual server with 'Tail Loss Probe' enabled can result in 'no trailing data' error

Component: Local Traffic Manager

Symptoms:
A configuration with a virtual server-to-virtual server flow established, for example by the 'virtual' iRule command, and using a TCP stack with 'Tail Loss Probe' enabled, might encounter a race between the delayed ACK and the tail loss probe, which can lead to a tmm_panic or an OOPs message:
no trailing data.

Conditions:
-- Virtual server-to-virtual server flow established.
-- TCP profile with 'Tail Loss Probe' enabled.
-- Certain timing related traffic scenario.

Impact:
TMM generates a core and reports an OOPs message:
no trailing data.

Workaround:
Do not use a TCP stack with 'Tail Loss Probe' enabled in conjunction with a virtual server-to-virtual server flow configuration.


862525-7 : GUI Browser Cache Timeout option is not available via tmsh

Component: TMOS

Symptoms:
In BIG-IP v10.x it was possible to change the browser cache timeout from bigpipe using the command:
  bigpipe httpd browsercachetimeout

In 14.1.2.1 and newer, it is still possible to change the value in the GUI using "System :: Preferences :: Time To Cache Static Files.

However there is no tmsh equivalent in any version.

Conditions:
This is encountered when you try to configure the GUI browser cache timeout setting using tmsh.

Impact:
Unable to modify browser cache timeout except from GUI

Workaround:
Using GUI to configure this field. GUI System :: Preferences :: Time To Cache Static Files.


862001-7 : Improperly configured NTP server can result in an undisciplined clock stanza

Component: Local Traffic Manager

Symptoms:
There can be an undisciplined clock stanza in /etc/ntp.conf, resulting in an undisciplined clock.

NTP documentation:
http://support.ntp.org/bin/view/Support/UndisciplinedLocalClock

Conditions:
This might occur in at least the following ways:
-- No server is specified in 'sys ntp servers {}'.
-- A server does exist, but an improper method was used to configure the NTP server.

Impact:
When the LOCAL undisciplined clock is left as a valid time-source, it delays the system synchronizing time to a real NTP server. It can also result in time being adjusted incorrectly if the the remote time-source becomes unreachable.

Workaround:
Configure a dummy server via 'ntp servers {}' that does not respond.

While this removes the undisciplined local clock, it does result in ntpd having an unreachable time source, and could be flagged in diagnostics, misdirect other troubleshooting, generate unnecessary traffic, etc.
 
However, if the 'dummy' source starts responding, it could become a rogue time source.


860617-4 : Radius sever pool without attaching the load balancing algorithm will result into core

Component: Access Policy Manager

Symptoms:
Tmm crashes after configuring a radius server pool.

Conditions:
-- Radius server pool exists
-- Radius server pool does not have a designated load balancing algorithm.

Impact:
TMM will core while radius accounting stops. Traffic disrupted while tmm restarts.

Workaround:
N/A


860573-4 : LTM iRule validation performance improvement by tracking procedure/event that have been validated

Component: TMOS

Symptoms:
Loading (with merge) a configuration file that references some iRules results in validating every iRule and ends up validating the same procedures multiple times for every virtual server a single iRule is associated with.

Conditions:
Configuration which has 100's of virtual servers, some iRules that are assigned to all virtual servers and a few library iRules.

Impact:
Task fails (via REST) or ends up taking a really long time when run manually.

Workaround:
None.


860277-5 : Default value of TCP Profile Proxy Buffer High Low changed in 14.1

Component: Local Traffic Manager

Symptoms:
Version: 13.1.3.1

# tmsh list ltm profile tcp tcp proxy-buffer-high proxy-buffer-low
ltm profile tcp tcp {
    proxy-buffer-high 49152
    proxy-buffer-low 32768
}

       proxy-buffer-high
            Specifies the highest level at which the receive window is closed.
            The default value is 49152.

       proxy-buffer-low
            Specifies the lowest level at which the receive window is closed.
            The default value is 32768.

Version: 14.1.2.2

# list ltm profile tcp TCP proxy-buffer-high proxy-buffer-low
ltm profile tcp tcp {
    proxy-buffer-high 65535
    proxy-buffer-low 32768
}


proxy-buffer-high
            Specifies the highest level at which the receive window is closed.
            The default value is 131072.

proxy-buffer-low
            Specifies the lowest level at which the receive window is closed.
            The default value is 98304.

Conditions:
Looking at the help for proxy-buffer-high and proxy-buffer-low in tmsh

Impact:
The default value for proxy-buffer-high is 65535 and the default value for proxy-buffer-low is 32768, but the help text indicates that the defaults are 13072 and 98304 respectively.


860041-5 : Portal Access: 5_Deflate_removeEventListener wrapper need to be added

Component: Access Policy Manager

Symptoms:
Various issues are possible, for example, the drop-down menu is not clickable, etc.

Conditions:
Web application code that uses native removeEventListener() function indirectly.

Impact:
The web application does not function as expected.

Workaround:
Use a custom iRule. In the following example, replace '/PATH_TO_HTML_FILE' with the actual path of the web application:
#
# Custom workaround replace wrappers for
# addEventListener and removeEventListener with
# pass-through wrappers
#
# v1. very simple
#

when REWRITE_REQUEST_DONE {
  if {
    [HTTP::path] ends_with "/PATH_TO_HTML_FILE"
  } {

    # log "URI=([HTTP::path])"
    # Found the file to modify

    REWRITE::post_process 1
    set do_it 1
  }
}

when REWRITE_RESPONSE_DONE {
  if {[info exists do_it]} {
    unset do_it

    set str {<script>try}
    set strlen [string length $str]

    set strt [string first $str [REWRITE::payload]]
    if {$strt > 0} {
      REWRITE::payload replace $strt 0 {
        <script>
          function F5_Invoke_addEventListener (o, e, h, c) {
            console.log('addEventListener '+e);
            var args = [];
            for (var i = 1; i<arguments.length; i++) {
              args[i-1] = arguments[i]
            }
            return o.addEventListener.apply(o,args);
          }

          function F5_Invoke_removeEventListener(o, e, h, c) {
            console.log('removeEventListener '+e);
            var args = [];
            for (var i = 1; i<arguments.length; i++) {
              args[i-1] = arguments[i]
            }
            return o.removeEventListener.apply(o,args);
          }
        </script>
      }
    }
  }
}


858973-5 : DNS request matches less specific WideIP when adding new wildcard wideips

Component: Global Traffic Manager (DNS)

Symptoms:
After adding a new wildcard wideip, DNS requests start matching the wildcard even if a more specific wildcard wideip should match.

Conditions:
New less specific Wildcard WideIPs are created.

Impact:
DNS request matches less specific WideIP.

Workaround:
# tmsh load sys config gtm-only
or
restart tmm


858701-5 : Running config and saved config are having different route-advertisement values after upgrading from 11.x/12.x

Component: Local Traffic Manager

Symptoms:
When you upgrade an 11.x/12.x device with route advertisement enabled, you might discover a difference between the running configuration and the saved configuration post upgrade, which might result in route advertisement becoming disabled.

-- In the running configuration, the virtual-addresses route advertisement setting 'enabled' changes to 'selective'.
-- In bigip.conf, the virtual-addresses route advertisement setting is still set to 'enabled'.
-- After config load or after re-licensing, the virtual-addresses route advertisement reverts to disabled.

Conditions:
-- Upgrading an 11.x/12.x device with route advertisement enabled.
-- After saving the config, both the running-config and bigip.conf have the same value: i.e., 'selective'.
-- Loading the configuration (tmsh load sys config) results in route advertisement becoming disabled.

Impact:
The route-advertisement setting is 'enabled' in the config file, but 'selective' in the running configuration. This has the following impact:

If you save the configuration and then reload it, the route advertisement is changed to 'selective' in the config file and 'disabled' in the running config.

Workaround:
You can identify whether systems running v13.0.0 or higher are at risk of encountering this issue by checking a legacy internal setting, ROUTE_ADVERTISEMENT:

Procedure to identify whether virtual-addresses are affected, that have an incorrect setting in the legacy ROUTE_ADVERTISEMENT artifact:

  Virtual-addresses may be affected by this issue on v13.0.0 and higher if ROUTE_ADVERTISEMENT=true in mcpd.

  You can check this value with the guishell command:
    guishell -c "select NAME,ROUTE_ADVERTISEMENT,RA_OPTION from virtual_address";

    Example:
      guishell -c "select NAME,ROUTE_ADVERTISEMENT,RA_OPTION from virtual_address";
        -----------------------------------------------------------
        | NAME | ROUTE_ADVERTISEMENT | RA_OPTION |
        -----------------------------------------------------------
        | /Common/10.32.101.41 | false | 0 | <<< no risk, virtual-address created in 13.1.3.2 with route-advertisement disabled
        | /Common/10.32.101.42 | false | 2 | <<< no risk, virtual-address created in 13.1.3.2 with route-advertisement selective
        | /Common/10.32.101.43 | false | 1 | <<< no risk, virtual-address created in 13.1.3.2 with route-advertisement enabled
        | /Common/10.32.101.47 | true | 0 | <<< MEDIUM RISK virtual-address from a 11.6.2 upgrade or 11.6.2 ucs with route-advertisement not in use
        | /Common/10.32.101.49 | true | 1 | <<< HIGH RISK virtual-address from a 11.6.2 upgrade or 11.6.2 ucs with route-advertisement enabled

      Any virtual address that shows ROUTE_ADVERTISEMENT=true is at risk. If true but route-advertisement is not in use, there is no risk until route-advertisement is configured later.

------------------------------------------------------------------------------------------
Procedure to remove the legacy ROUTE_ADVERTISEMENT artifact from the config on systems found to be affected:

1. Review Standby system (if available) and ensure Route Advertisement in running configuration is configured and functioning as desired with "tmsh list ltm virtual-address route-advertisement". If not, manually correct Route Advertisement to desired configuration and confirm functionality.

2. Fail over Active system to Standby status:
  tmsh run sys failover standby

3. Review former Active (now Standby) system and ensure Route Advertisement in running configuration is configured and functioning as desired. If not, manually correct Route Advertisement to desired configuration.

4. Save the config to disk:
  tmsh save sys config

5. Load the config from disk. This may temporarily cause route-advertisement to revert to disabled on at risk virtual-addresses:
  tmsh load sys config

6. Load the config a 2nd time. This removes the legacy artifact, re-enables route-advertisement as per the configuration, and leaves the system in a not-at-risk state:
  tmsh load sys config

7. Verify it worked:
  guishell -c "select NAME,ROUTE_ADVERTISEMENT,RA_OPTION from virtual_address";

  Example of a fixed config:
    guishell -c "select NAME,ROUTE_ADVERTISEMENT,RA_OPTION from virtual_address";
      -----------------------------------------------------------
      | NAME | ROUTE_ADVERTISEMENT | RA_OPTION |
      -----------------------------------------------------------
      | /Common/10.32.101.41 | false | 0 | <<< no risk, virtual-address created in 13.1.3.2 with route-advertisement disabled
      | /Common/10.32.101.42 | false | 2 | <<< no risk, virtual-address created in 13.1.3.2 with route-advertisement selective
      | /Common/10.32.101.43 | false | 1 | <<< no risk, virtual-address created in 13.1.3.2 with route-advertisement enabled
      | /Common/10.32.101.47 | false | 0 | <<< no risk, virtual-address from a 11.6.2 upgrade or 11.6.2 ucs with route-advertisement not in use
      | /Common/10.32.101.49 | false | 1 | <<< no risk, virtual-address from a 11.6.2 upgrade or 11.6.2 ucs with route-advertisement enabled

------------------------------------------------------------------------------------------
If you encounter this issue and route-advertisement becomes disabled before cleaning the legacy ROUTE_ADVERTISEMENT artifact from the config, reload the configuration again using the following command to set the running config and saved config to 'selective':

tmsh load sys config


857953-1 : Non-functional disable/enable buttons present in GTM wide IP members page

Component: Global Traffic Manager (DNS)

Symptoms:
Enable/disable buttons do not perform any action against the selected members when pressed.

Conditions:
-- GTM wide IP has members.
-- Navigate to the GTM wide IP members page.
-- Attempt to enable or disable a selected member./

Impact:
No action against the selected members occurs when the buttons are pressed.

Workaround:
None.


857897-3 : Address and port lists are not searchable within the GUI

Component: Advanced Firewall Manager

Symptoms:
Search from shared objects of IP addresses in the address list and port numbers in the port list does not work as expected. In previous releases, it was possible to expand all address/port lists in a single operation. There is no support for that in this release.

Conditions:
Searching from shared objects of IP addresses in the address list and port numbers in the port list.

Impact:
It is no longer possible to expand all address/port lists in a single operation, and because all lists needs to be expanded to allow a search using the browser or cache the objects in the embedded search box from the GUI, the functionality does not work as expected.

Workaround:
None.


856713-4 : IPsec crash during rekey

Component: TMOS

Symptoms:
IPsec-related tmm crash and generated core file during rekey.

Conditions:
-- IPsec timeout occurs.
-- Some temporary SA's are created by racoon.

Impact:
Tmm crashes and creates core file. Traffic disrupted while tmm restarts.

Workaround:
None.


854129-1 : SSL monitor continues to send previously configured server SSL configuration after changes (removal/modification)

Component: Local Traffic Manager

Symptoms:
Monitor continues to send previously configured settings from the server SSL profile such as client certificate or cipher list after the SSL profile has been removed/modified from the monitor.

Conditions:
-- In-TMM monitor configured.
-- SSL monitor configured with a server SSL profile.
-- Modification of the server SSL profile on the monitor.

Impact:
The previously configured settings, such as certificate or cipher, may continue to be transmitted to the server, resulting in node continuing to be marked up or down (respectively).

Workaround:
You can use either of the following workarounds:

-- Disable and then re-enable the pool member.

-- Restart tmm. Note: Using this option interrupts traffic. Traffic disrupted while tmm restarts.


854001-1 : TMM might crash in case of trusted bot signature and API protected url

Component: Application Security Manager

Symptoms:
When sending request to a protected API URL, with a trusted bot signature, tmm tries to perform reverse DNS to verify the signature. During this process, the URL qualification might change. In this case - tmm crashes.

Conditions:
-- Bot Defense profile attached.
-- 'API Access for Browsers and Mobile Applications' is enabled.
-- A DNS server is configured.
-- Request is sent to an API-qualified URL.
-- Request is sent with a trusted bot signature.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Disable the 'API Access for Browsers and Mobile Applications' or remove the DNS server.


852325-6 : HTTP2 does not support Global SNAT

Component: Local Traffic Manager

Symptoms:
The Global SNAT feature does not work with HTTP2.

Conditions:
-- Global SNAT is used
-- HTTP2 is used.

Impact:
Traffic uses the incorrect IP addresses when sourced from the BIG-IP system.

Workaround:
Use an explicit SNAT setting: SNAT Auto-Map or a SNAT pool.


851385-2 : Failover takes too long when traffic blade failure occurs

Component: Local Traffic Manager

Symptoms:
When blades 1 and 4 are disabled on the active chassis, the failover period is between 3.4 to 4.7 seconds before the next-active device starts processing messages.
  
If the blades are physically pulled from the chassis,
the failure occurs within 1 second.

Conditions:
-- Multi-blade VIPRION system
-- Blades 1 and 4 are connected to the network via trunks, blades 2 and 3 are CPU-only blades
-- Blades 1 and 4 are disabled via the GUI

Impact:
Significant delay before BIG-IP delivers a web page during between-cluster failover


851121-1 : Database monitor DBDaemon debug logging not enabled consistently

Component: Local Traffic Manager

Symptoms:
Debug logging in the database monitor daemon (DBDaemon) for database health monitors (mssql, mysql, postrgresql, oracle) is enabled on a per-monitor basis.
When a ping is initiated for a particular monitor with debug logging enabled in the monitor configuration, debug logging in DBDaemon is enabled.
When a ping is initiated for a particular monitor with debug logging disabled in the monitor configuration, debug logging in DBDaemon is disabled.
When monitoring database pool members with a mix of monitors with debug logging enabled vs. disabled, the result can be that debug logging in DBDaemon is enabled and disabled at times which do not correspond to all actions related to a specific database monitor, or pool members monitored by that monitor.
In addition, debug messages logging internal DBDaemon state related to the management of the full collection of monitored objects, active threads, etc. may not be logged consistently.

Conditions:
-- Using multiple database health monitors (mssql, mysql, postrgresql, oracle)
-- Enabling debug logging on one or more database health monitors, but not all

Debug logging for database health monitors is enabled by configuring the "debug" property of the monitor with a value of "yes".
Debug logging is disabled by configuring the "debug" property with a value of "no" (default).

# tmsh list ltm monitor mysql mysql_example debug
ltm monitor mysql mysql_example {
    debug yes
}

Impact:
Logging of database monitor activities by DBDaemon may be inconsistent and incomplete, impeding efforts to diagnose issues related to database health monitors.

Workaround:
When attempting to diagnose database health monitor issues with DBDaemon debug logging, enable debug logging for ALL database monitors currently in use.
Once diagnostic data collection is completed, disable debug logging for all database monitors currently configured/in use.


850509-4 : Zone Trusted Signature inadequately maintains following change of master key

Component: Global Traffic Manager (DNS)

Symptoms:
During config load or system start-up, you may see the following error:

-- 01071769:3: Decryption of the field (privatekey) for object (13079) failed.
Unexpected Error: Loading configuration process failed.

In some instances, other errors resembling the following may appear:

-- Failed to sign zone transfer query for zone DNSZONE01 using TSIG key zone01key.pl.

-- Failed to transfer DNSZONE01 from 203.0.113.53, will attempt IXFR (Retry).

Conditions:
-- TSIG keys are present in the device configuration.
-- The device's master key is changed.

Impact:
Unable to view TSIG keys. Configuration cannot be loaded. Failures of DNS zone transfers may occur.

Workaround:
None.


848217-5 : Portal Access: default port encoded in rewritten url, need to be removed from host header in request to backend

Component: Access Policy Manager

Symptoms:
Bad response, or invalid response for request in which default port was used in web-application.

Conditions:
Default port is used in the url, back end application does not expect the default port in the request's Host header.

Impact:
Web-application misfunction

Workaround:
Custom workaround iRule can be used to remove default port form rewritten url.


847105-1 : The bigip_gtm.conf is reverted to default after rebooting with license expired

Component: Global Traffic Manager (DNS)

Symptoms:
The bigip_gtm.conf is reverted to default after rebooting (or upgrading to a newer BIG-IP software release).

Conditions:
-- The BIG-IP license is expired prior to the reboot or upgrade.
-- GTM is configured.

Impact:
The GTM configuration (in /config/bigip_gtm.conf) information is lost in the newly installed boot location.

Workaround:
Renew license before reboot. Always reboot with valid license.

If you have already rebooted or upgraded with an expired license, and your configuration has been lost, you can restore it using the following procedure.

1. Re-activate the BIG-IP license
2. Restore bigip_gtm.conf from the auto-created backup (.bak) file:
   cp /config/bigip_gtm.conf.bak /config/bigip_gtm.conf
3. Load the replaced config:
   tmsh load sys config gtm-only

If this is a the result of a software upgrade, and the .bak file is not available or has been overwritten, you can boot back to the previous volume and re-copy the configuration from there (cpcfg or via the GUI) before rebooting back to the upgraded software release.


846977-6 : TCP:collect validation changed in 12.0.0: the first argument can no longer be zero

Component: Local Traffic Manager

Symptoms:
Validation for TCP::collect was changed in BIG-IP software v12.0.0 (with the introduction of JET specifications). Prior to 12.0.0, there were no restrictions on the values of the two arguments. As of 12.0.0, the first argument ('collect_bytes') must be a positive integer, and the second argument ('skip_bytes) must be a non-negative integer.

Occurrences of 'TCP::collect 0 0' in iRules experience issues when upgrading to a newer version, producing warnings in LTM log:

/Common/T_collect:9: warning: [The following errors were not caught before. Please correct the script in order to avoid future disruption. "invalid argument 0; expected syntax spec:"136 17][TCP::collect 0 0].

Conditions:
-- Using a version of BIG-IP software earlier than 12.0.0, configure an iRule with a 'TCP::collect 0 0' command.
-- Upgrade to 12.0.0 or later.

Impact:
Warning in the LTM log file. The iRules containing 0 values do not function as expected. There is no other impact.

Workaround:
Change 'TCP::collect 0 0' to a value other than 0 (zero) in any iRules before or after upgrade.


844925-4 : Command 'tmsh save /sys config' fails to save the configuration and hangs

Component: TMOS

Symptoms:
The 'tmsh save /sys config' command hangs and fails to save the configuration if there is a memory allocation failure when creating the reply.

Conditions:
-- A large number of iApps: in the thousands.
-- Each iApp has tens of variables.

Impact:
Because tmsh cannot save the configuration, if the BIG-IP system reboots, any changes made since the last successful save are lost.

Workaround:
Run the command:
tmsh save /sys config binary

This does not save the configuration to files in /config, but it does at least allow you to save the binary configuration.

That way, you can reboot the BIG-IP system and not lose the configuration.

Note: It is possible that a reboot will provide sufficient memory to save to configuration files. It depends on the configuration of virtual memory at the time of the save. It is possible that every time you want to save the config, you must use the binary option.


843317-4 : The iRules LX workspace imported with incorrect SELinux contexts

Component: Local Traffic Manager

Symptoms:
Files imported from iRules LX workspace may have incorrect SELinux contexts such as abrt_var_cache_t.

This can cause reloading the workspace to fail with errors:

01070079: failed to create workspace archive ... Return code {2}

Conditions:
Importing the iRules LX workspace.

Impact:
Workspace cannot be imported

Workaround:
As a workaround you can run the following command on the folders to restore the context:
restorecon -R -v


842669-5 : Syslog-ng / systemd-journald cannot handle logs with embedded newlines, write trailing content to /var/log/user.log

Component: TMOS

Symptoms:
Systemd-journald cannot handle logs with embedded newlines, write trailing content to /var/log/user.log. Bare ')' being logged to /var/log/user.log., for example:

cat /var/log/user.log
[...]: Deleting file /shared/core/*.core.*
[...]: Deleting file /shared/core/*.core.*
[...] )
[...] )

Conditions:
This occurs when the system logs syslog messages containing embedded newlines, such as

- The cron process tries and fails to send an email because of output about a cron script.
- Modify syslog include configuration
- Apply ASM policy configuration change
- GTM.debugprobelogging output from big3d

Impact:
The logging subsystem accepts syslog messages with embedded newlines, and writes first line to the appropriate file, and remaining lines to /var/log/user.log.

Workaround:
View the logs using journalctl -D /var/log/journal


842149-3 : Verified Accept for SSL Orchestrator

Component: Access Policy Manager

Symptoms:
You are unable to configure Verified Accept on SSL Orchestrator.

Conditions:
-- SSL Orchestrator in use .
-- A TCP profile is in use and it contains the Verified Accept flag.

Impact:
No connectivity over SSL Orchestrator.

Workaround:
None.


842137-2 : Keys cannot be created on module protected partitions when strict FIPS mode is set

Component: Local Traffic Manager

Symptoms:
When FIPS mode is set to use FIPS 140-2 Level 3 protection, new keys cannot be created in the module's protected partition

Conditions:
-- FIPS 140-2 Level 3 protection is configured on a NetHSM partition
-- You attempt to create a FIPS key using that partition

Impact:
New Keys cannot be created

Workaround:
Here are all the steps to generate a new netHSM key called "workaround" and install it into the BIG-IP config:

1.

[root@bigip1::Active:Standalone] config # fipskey.nethsm --genkey -o workaround -c module
WARNING: fipskey.nethsm will soon be deprecated for use with Thales. Please switch to using tmsh commands instead.
tmsh commands...

Generate Key:
tmsh create sys crypto key <key_name> security-type nethsm [gen-certificate|gen-csr] ...
For an exhaustive list of options, please consult F5's tmsh documentation.
Generate CSR for existing key:
tmsh create sys crypto csr <csr_name> key <key name> ...
For an exhaustive list of options, please consult F5's tmsh documentation.
Generate Self-Signed Certificate for existing key:
tmsh create sys crypto cert <cert_name> key <key name> ...
For an exhaustive list of options, please consult F5's tmsh documentation.
Delete Key:
tmsh delete sys crypto key <keyname>


str[cd /shared/tmp && /opt/nfast/bin/generatekey -b pkcs11 certreq=yes selfcert=yes protect=module size=2048 embedsavefile="workaround" plainname="workaround" digest=sha256]
key generation parameters:
 operation Operation to perform generate
 application Application pkcs11
 protect Protected by module
 verify Verify security of key yes
 type Key type RSA
 size Key size 2048
 pubexp Public exponent for RSA key (hex)
 embedsavefile Filename to write key to workaround
 plainname Key name workaround
 x509country Country code
 x509province State or province
 x509locality City or locality
 x509org Organisation
 x509orgunit Organisation unit
 x509dnscommon Domain name
 x509email Email address
 nvram Blob in NVRAM (needs ACS) no
 digest Digest to sign cert req with sha256

Key successfully generated.
Path to key: /opt/nfast/kmdata/local/key_pkcs11_ua882aa9fadee7e440772cb6686358f4b283922622
Starting synchronisation, task ID 5de83486.6e9e32d7f367eaf4
Directory listing failed: No such file or directory

2. (this is to confirm the key is present with the label "workaround"

[root@bigip1::Active:Standalone] config # nfkminfo -l

Keys with module protection:

 key_pkcs11_ua882aa9fadee7e440772cb6686358f4b283922622 `workaround'

Keys protected by cardsets:
...

3.
[root@bigip1::Active:Standalone] config # tmsh install sys crypto key workaround from-nethsm

4. (install public certificate)
[root@bigip1::Active:Standalone] config # tmsh install sys crypto cert workaround from-local-file /config/ssl/ssl.crt/workaround


840257 : Portal Access: HTML iframe sandbox attribute is not supported

Component: Access Policy Manager

Symptoms:
Issues with content displayed in iframes.

Conditions:
Using an iframe with the sandbox attribute in a web application.

Impact:
The web application does not work as expected.

Workaround:
Use an iRule as a workaround. Although the exact content of the iRule is strongly dependent on the web application, you can use the following iRule as a good example that can be customized:

when REWRITE_REQUEST_DONE {
  if {
    HTTP::path] ends_with "/CUSOM_PATH_TO_JS_FILE"
  } {
    REWRITE::post_process 1
  }

}

when REWRITE_RESPONSE_DONE {

  while {true} {
    set str { sandbox="}
    set strt [string first $str [REWRITE::payload]]
    set str_len [string length $str]

    if {
      $strt > 0
      and
      $strt < [expr [REWRITE::payload length] - $str_len]
    } {
      REWRITE::payload replace $strt $str_len { sandbo1="}
    } else {
      break
    }
  }

}


840249-1 : With BIG-IP as a SAML IdP, important diagnostic information is not logged

Component: Access Policy Manager

Symptoms:
When the BIG-IP system is configured as a SAML IdP and processes an SAML Authentication Request, if it does not find the appropriate SAML SP connector, it does not log relevant information such as the Issuer, ACS _URL, and Protocol binding from the Authentication request.

Conditions:
This occurs when a BIG-IP system is configured as a SAML IdP and processes a SAML Authentication request, but does not find an appropriate SP configuration that matches the information provided in the SAML Authentication request.

Impact:
Troubleshooting the issue and fixing the SAML configuration is difficult since there is no relevant information in the error log.

Workaround:
Enable the log level for SSO to 'Debug', and capture the logs at the debug level to troubleshoot further.


839361-7 : iRule 'drop' command does not drop packets when used in DNS_RESPONSE

Component: Global Traffic Manager (DNS)

Symptoms:
The iRule 'drop' command may not drop a DNS response when called under DNS_RESPONSE event.

Conditions:
iRule drop is used under DNS_RESPONSE event.

Impact:
DNS response may be improperly forwarded to the client.

Workaround:
Use DNS::drop instead.


839121-4 : A modified default profile that contains SSLv2, COMPAT, or RC2 cipher will cause the configuration to fail to load on upgrade

Solution Article: K74221031

Component: TMOS

Symptoms:
After upgrading, the configuration fails to load and throws an error about a profile that is located in profile_base.conf using SSLv2. However, upon inspection you will notice that there is no SSLv2 cipher in use.

Conditions:
The upgrade failure is seen when all the following conditions are met:

-- BIG-IP system with SSLv2 as the ciphers option in an SSL profile running software v12.x/v13.x.
-- Upgrading to a version that reports an error when using SSLv2, such as v14.x/v15.x.
(1) Modified root SSL profile (such as /Common/clientssl or /Common/serverssl) is present in bigip.conf.
(2) The modified root SSL profile contains an invalid keyword 'COMPAT', 'SSLv2', or 'RC2' in its ciphers
(3) The default profiles whose ciphers inherited from the root profile are not present in bigip.conf. The error for invalid ciphers is reported against these profiles.

Impact:
Beginning in version 14.x, SSLv2 has been changed from being a warning condition, and now prevents the configuration from loading. In most cases the upgrade script properly removes this, so there is no issue. However, if this issue is encountered, the configuration fails to load after upgrading.

Workaround:
There are two possible workarounds:

-- The easiest way to work around this is to comment out the modified base profile from bigip.conf and then run the command: tmsh load sys config.

-- If you are post upgrade, you can use sed to remove the !SSLv2 entries. To do so, perform these steps on the standby device:

 1. cp /config/bigip.conf /config/backup_bigip.conf
 2. Run: sed -i "s/\!SSLv2://g" /config/bigip.conf
 3. tmsh load /sys config


835505-5 : Tmsh crash potentially related to NGFIPS SDK

Component: Local Traffic Manager

Symptoms:
Tmsh crash occurs rarely. The NGFIPS SDK may generate a core as well.

Conditions:
The exact conditions that trigger this are unknown.

It can be encountered when running the following tmsh command:

tmsh -a show sys crypto fips key field-fmt include-public-keys all-properties

Impact:
Tmsh may crash. You are exited from tmsh if you were using it as a shell.

Workaround:
None.


830341-3 : False positives Mismatched message key on ASM TS cookie

Component: Application Security Manager

Symptoms:
ASM system triggers false positives for ASM Cookie Hijacking violation with reason "Mismatched message key"

Conditions:
-- An HTTP request containing an old frame cookie with a different message key from the main ts cookie is rejected
-- The cookie is left intact

Impact:
All subsequent requests are rejected on ASM Cookie Hijacking violation

Workaround:
1. Disable "Learn Host Names" flag all policies. If the policy builder is on manual mode, they need to change it back to Auto mode, disable "Learn Host Names", then change to manual mode.

OR

2. Delete the mismatched cookie. This will cause the violations to stop occurring if the request comes from a legit endpoint


829821-8 : Mcpd may miss its high availability (HA) heartbeat if a very large amount of pool members are configured

Component: TMOS

Symptoms:
If a very large amount of pool members are configured (tens of thousands), mcpd may miss its high availability (HA) heartbeat and be killed by sod.

Conditions:
-- A large number of pool members.
-- Pool member validation occurs (such as when loading a configuration or doing a configsync operation).

Impact:
Mcpd is killed by sod. This causes a failover (when the BIG-IP is in a DSC) or outage (if standalone).

Workaround:
None.


829021-2 : BIG-IP does not account a presence of http2 profile when response payload is modified

Component: Local Traffic Manager

Symptoms:
The BIG-IP system might close a connection when the HTTP response payload is modified and sent without chunking encoding. If communication goes over an HTTP connection, the BIG-IP system closes a connection to tell a client that a response is served. With HTTP/2 connections, an unsized response is marked with the END_STREAM flag. This case is not accounted for, and the BIG-IP system closes HTTP communication with a server anyway.

Conditions:
-- A virtual server has an http/2 profile configured on the client side.
-- There are other profiles configured which can modify the HTTP response payload.

Impact:
The BIG-IP system wastes resources not reusing a server side HTTP connection when an unsized response is sent over an HTTP/2 connection to a client.

Workaround:
None.


828789-4 : Display of Certificate Subject Alternative Name (SAN) limited to 1023 characters

Component: TMOS

Symptoms:
Certificate Subject Alternative Names are limited to 1023 characters.

Conditions:
Using a certificate with a Subject Alternative Name longer than 1023 characters.

Impact:
A certificate's Subject Alternative Name is not correct in the BIG-IP configuration.

This does not impact the BIG-IP system's ability to select the proper Client SSL profile on a virtual server that uses SNI matching to provide distinct certificates.

Workaround:
Specify fewer than 1023 character for the Certificate Subject Alternative Names.


824437-8 : Chaining a standard virtual server and an ipother virtual server together can crash TMM.

Component: Local Traffic Manager

Symptoms:
TMM crashes with a SIGFPE and restarts. The TMM logs contain the following panic message:

Assertion "xbuf_delete_until successful" failed.

Conditions:
This issue occurs when the following conditions are met:

-- The system has been configured with a standard virtual server and an Any IP (ipother) virtual server chained together. This can be done explicitly using an iRule that features the 'virtual' command to connect the two virtual servers, or implicitly with certain APM configurations.

-- The pool member on the server-side asks this specific virtual server configuration on the BIG-IP system to retransmit data.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Ensure the target virtual server in the chain configuration does not use the ipother profile.


822245-1 : Large number of in-TMM monitors results in some monitors being marked down

Component: Local Traffic Manager

Symptoms:
Pool members are marked down from the in-TMM monitor.

Conditions:
Device has a large number of in-TMM monitors.

Impact:
Monitor target may appear down when it is actually up.

Workaround:
Disable in-tmm monitors:
  tmsh modify sys db bigd.tmm value disable


819329-5 : Specific FIPS device errors will not trigger failover

Component: Local Traffic Manager

Symptoms:
When the FIPS device experiences a hardware failure during idle-time, the device may not fail over.

Conditions:
-- FIPS hardware failure occurs, but the device is idle

Impact:
The device may not fail over on FIPS hardware failure.


818705-3 : BIG-IP CPU utilization is very high (>90%)

Component: Advanced Firewall Manager

Symptoms:
The AFM Auto threshold and behavioral dos historical data synchronization process consumes greater than 90% CPU. This affects TMM performance and some outages may occur.

Conditions:
This occurs in both high availability (HA) and standalone configurations. In both cases "MCPD" issues were reported. (Delay in response or the daemon crashed)

Impact:
TMM performance is affected and outages may occur.

Workaround:
Kill the AFM data synchronization process:

kill -9 afm_cmi.py


818069-7 : GUI hangs when iApp produces error message

Component: iApp Technology

Symptoms:
If lengthy Tcl errors are displayed in the GUI while creating an iApp, the GUI can hang.

Conditions:
-- Creating an iApp that contains a syntax error.
-- A large error message is emitted.

Impact:
GUI hangs.

Workaround:
Restart the tomcat process:
tmsh restart sys service tomcat


817989-2 : Cannot change managemnet IP from GUI

Component: TMOS

Symptoms:
You are unable to change the management IP from the GUI

Conditions:
This is encountered when using the GUI to change the management IP address via the System :: Platform page.

Impact:
The GUI indicates that it will redirect you to the new IP address. You will eventually be redirected but the management IP address is not changed on the BIG-IP device.

Workaround:
Use tmsh to create the management IP. This will overwrite the old one.

Example:
create /sys management-ip [ip address/prefixlen]

To view the management IP configurations

tmsh list /sys management-ip


816953-2 : RST_STREAM is sent in closed state on a serverside stream in HTTP/2 full proxy

Component: Local Traffic Manager

Symptoms:
RST_STREAM is sent on a serverside stream in closing state in HTTP/2 full proxy.

Conditions:
-- HTTP/2 clientside and serverside profiles are attached to the virtual server.
-- HTTP and httprouter profiles are attached to the virtual server.
-- Race between clientside and serverside closing, where clientside closes faster.

Impact:
RST_STREAM is sent on a stream in closed state.


815405-5 : GUI update of Child FastL4 profile overwrites CLI-only customized settings (options that are not available in GUI)

Component: Local Traffic Manager

Symptoms:
Child FastL4 profile is being reset after clicking Update from GUI.

Conditions:
-- Create child SSL FastL4, profile inheriting settings from a parent FastL4 profile.
-- From the command line, change any of the CLI-only visible settings in the child FastL4 profile (e.g., pva-acceleration, explicit-flow-migration, etc.), and save the changes.
-- In the GUI, click the Update button in the child FastL4 profile without making any change.

Impact:
The operation overwrites the CLI changes made in the child profile, and inherits those values from the parent settings instead.

Workaround:
None.


810613-6 : GUI Login History hides informative message about max number of lines exceeded

Component: TMOS

Symptoms:
When there are more than 10000 lines in /var/log/secure* files, visiting System :: Logins :: [History|Summary] in the GUI shows 'No Entries' instead of the actual error message about the large number of lines.

Conditions:
If there are more than 10000 lines in /var/log/secure* files.

Impact:
GUI displays 'No Entries' instead of the actual error message.

Workaround:
-- Via the CLI by specifying the number of lines:
tmsh show sys log security lines 15000 | less
-- Delete the large amount of secure files from /var/log/.


808481-6 : Hertfordshire county missing from GTM Region list

Component: TMOS

Symptoms:
Hertfordshire county is missing from Regions in the United Kingdom Country/State list.

Conditions:
-- Creating a GTM region record.
-- Attempting to select Hertfordshire county for the United Kingdom.

Impact:
Cannot select Hertfordshire county from United Kingdom Country/State list.

Workaround:
None.


808017-6 : When using a variable as the only parameter to the iRule persist command, the iRule validation fails

Component: Local Traffic Manager

Symptoms:
When using a variable as the only parameter to the iRule persist command, for example:

when HTTP_REQUEST {
    set persistence none
    persist $persistence
}

The iRule validation fails with the message:

Persistence mode (Cookie) called out in rule <rule name> requires a corresponding persistence profile for virtual server

Conditions:
Using a variable as the only parameter to the iRule persist command.

Impact:
Validation fails and hence the system config cannot be loaded.

Workaround:
The first parameter is one of pre-defined action keywords, so use plain text.


807945-4 : Loading UCS file for the first time not updating MCP DB

Component: TMOS

Symptoms:
MCP DB is not updated after loading a UCS file.

Conditions:
1. Save UCS with 'flow-control' default value 'tx-rx'.
2. Modify the value from 'rx-tx' to 'none'.
3. Save another UCS with modified value.
4. Load the UCS with default value, everything works fine here.
5. Load the UCS with the modified value.

Impact:
The 'flow-control' setting gets changed. The functionality does not work after the first UCS load as MCP DB is not getting updated.

Workaround:
Load the same UCS again.

The MCP DB gets updated properly.


807837-1 : Upgrade fails when client-ssl inherits proxy-ca-key/cert with error message: Client SSL profile (/Common/child): must have at least one set of CA type cert-key-chain.

Component: TMOS

Symptoms:
Upgrade failure when loading configuration file or ucs from older version, with the below error message against child client-ssl profile:

Client SSL profile (/Common/child): must have at least one set of CA type cert-key-chain.

Conditions:
The issue occurs when all of the following conditions are met:
-- When upgrading from an older version (earlier than 14.0.0) to a newer version (14.1.0 or later).
-- The configuration has a child client SSL profile that inherits from a parent client SSL profile.
-- The parent SSL profile has SSL forward proxy enabled and proxy-ca-cert/proxy-ca-key configured.

Impact:
Unable to upgrade the system with old configuration.

Workaround:
You can workaround this issue using the following procedure:

1. Manually edit /config/bigip.conf to add the following lines:
 proxy-ca-cert /Common/rsa.crt
 proxy-ca-key /Common/rsa.key

2. Reload the configuration using the following command:
tmsh load sys config

Here is an example:

ltm profile client-ssl /Common/child {
    app-service none
    cert /Common/default.crt
    cert-key-chain {
        default {
            cert /Common/default.crt
            key /Common/default.key
        }
    }
    chain none
    defaults-from /Common/parent
    inherit-certkeychain true
    key /Common/default.key
    passphrase none
    proxy-ca-cert /Common/rsa.crt <===== add this line
    proxy-ca-key /Common/rsa.key <===== add this line

}


807397-4 : IRules ending with a comment cause config verification to fail

Component: Local Traffic Manager

Symptoms:
'tmsh load sys config verify' reports error messages for a signed iRule:
-- 01071485:3: iRule (/Common/example) content does not match the signature.
-- Unexpected Error: Validating configuration process failed.

Conditions:
-- Have an iRule which ends in a comment.
-- iRule is signed.
-- Run the command:
tmsh load sys config verify

Impact:
'tmsh load sys config verify' reports an error when there should be none. Configuration validation fails.

Workaround:
Delete or move any comments that are at the end of the iRule, and validate the configuration again.


807309-4 : Incorrect Active/Standby status in CLI Prompt after failover test

Component: TMOS

Symptoms:
After running 'promptstatusd -y' to check current failover status, it displays an incorrect Active/Standby status in the CLI prompt.

Conditions:
This occurs under the following conditions:

1. Modify the db variable: bigdb failover.state.
2. Check that /var/prompt/ps1 and CLI prompt reflect the setting.
2. Reboot the BIG-IP system.

Impact:
Status shown in the prompt does not change.

Workaround:
Do not run 'promptstatusd -y' command manually.

The db variable 'failover.state is a status-reporting variable. The system does not report status manually set to something other than the actual status.

Note: 'promptstatusd' is not a BIG-IP user command, it is a daemon. It is highly unlikely that manually running this command will produce information that is useful or relevant to the status being sought.


806881-7 : Loading the configuration may not set the virtual server enabled status correctly

Component: TMOS

Symptoms:
When loading the configuration, if the virtual address is disabled but the virtual server is enabled, the virtual server may still pass traffic.

Conditions:
-- Loading the configuration.
-- A virtual server's virtual address is disabled.

Impact:
Virtual servers unexpectedly process traffic.

Workaround:
Manually re-enable and disable the virtual address.


805561-2 : Change of pool configuration in one-connect environment can impact active traffic

Component: Local Traffic Manager

Symptoms:
In one-connect environment, when default pool is updated for the first time, active connections will reconnect to new pool members. Further update to pool configuration will not have any impact on traffic.

Conditions:
-- Virtual server with one-connect profile.
-- Default pool is updated when active connections are present.

Impact:
Active traffic disrupted.

Workaround:
None.


805325-7 : tmsh help text contains a reference to bigpipe, which is no longer supported

Component: TMOS

Symptoms:
The 'sys httpd ssl-certkeyfile' tmsh help text contains a reference to bigpipe, which is no longer supported.

Conditions:
Viewing tmsh help for 'sys httpd ssl-certkeyfile'.

Impact:
Incorrect reference to bigpipe.

Workaround:
You can use the following command sequence to change the key:
modify httpd { ssl-certfile [string] ssl-certkeyfile [string] }


804157-4 : ICMP replies are forwarded with incorrect checksums causing them to be dropped

Component: Local Traffic Manager

Symptoms:
If a FastL4 virtual server receives an ICMP response without first receiving an ICMP request, the checksum on the ICMP response that is egressed by tmm will not be calculated correctly.

Conditions:
An ICMP response without a corresponding ICMP request, such as in non-symmetric routing scenarios.

Impact:
ICMP replies are forwarded with the incorrect checksum and likely will be dropped by the recipient or other devices on the network.

Workaround:
Ensure symmetric routing. Configure L7 virtual servers for use with ipother profiles.


803457-4 : SNMP custom stats cannot access iStats

Component: TMOS

Symptoms:
While doing an snmpwalk, you encounter the following error:

-- tcl callback Default return string: istats: tmstat_open_read: open: /var/tmstat/istats: Permission denied.
-- istats: tmstat_read: open: /var/tmstat/istats: Permission denied.
-- ERROR opening iStats read segment '/var/tmstat/istats': Permission denied.

Conditions:
This occurs when using SNMP to access iStats.

Impact:
iStats cannot be accessed through SNMP and generates an error.

Workaround:
None.


803149-3 : Flow Inspector cannot filter on IP address with non-default route_domain

Component: Advanced Firewall Manager

Symptoms:
Flow Inspector cannot filter on IP address with non-default route_domain.

Conditions:
-- In Flow Inspector.
-- Attempting to filter results.
-- Some results use IP addresses with non-default route domains.

Impact:
Filter does not return results as expected.

Workaround:
None.


802721-5 : Virtual Server iRule does not match an External Data Group key that's 128 characters long

Component: Local Traffic Manager

Symptoms:
Virtual server iRule does not match an External Data Group key that is 128 characters long.

Conditions:
-- A string type External Data Group with a key/value pair whose key is 128 characters long.

-- An iRule using [class match] to get the value from the Data Group.

Impact:
The call to [class match] returns an empty string ("").

Workaround:
None.


799001-8 : Sflow agent does not handle disconnect from SNMPD manager correctly

Component: TMOS

Symptoms:
If Sflow agent loses the connection with the SNMPD Manager, it tries to connect multiple times but fails to reconnect.

Conditions:
Sflow agent loses connection with the SNMPD Manager. The conditions that may trigger this are unknown.

Impact:
Snmpd service restarts repeatedly

Workaround:
Run 'tmsh restart sys service sflow_agent' to clear the session data in the sflow agent which results in successful re-connection with snmpd.


798885-5 : SNMP response times may be long due to processing burden of requests

Component: TMOS

Symptoms:
It is possible with large configurations to make SNMP requests that require a lot of processing to gather the statistics needed to respond to the request.

Conditions:
With large configurations, it is possible to overburden MCPD and SNMPD such that client queries time out.

Impact:
SNMP clients might think the BIG-IP system has become unresponsive.

Workaround:
If the responses to SNMP queries are taking too long, MCPD and SNMPD may overburden the control plane. It may be necessary to lengthen the timeout and retry values used by the SNMP client. It may also be helpful to trim what is queried, for example, not repetitively walking large tables like the Virtual Server or LTM Pool Member tables for statistics.


797573-2 : TMM assert crash with resulting in core generation in multi-blade chassis

Component: Local Traffic Manager

Symptoms:
TMM crashes while changing settings.

Conditions:
Seen on multi-blade chassis with either one of the options:
-- Running system with DoS and other traffic.
-- Create a new vCMP guest and deploy it.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


795933-8 : A pool member's cur_sessions stat may incorrectly not decrease for certain configurations

Component: Local Traffic Manager

Symptoms:
Under certain conditions, a pool member's cur_sessions stat may increase, but not decrease when it should.

Conditions:
- The virtual server using the pool has an iRule attached that references global variables.
- The virtual server using the pool has an ASM security policy attached to it.
- Traffic flows to the pool member.

Impact:
Incorrect stats.


795429-6 : Unrelated iControl REST transaction error message is returned when committing a transaction without any tasks.

Component: TMOS

Symptoms:
An unrelated iControl REST transaction error message is returned when committing an iControl REST transaction that does not contain any tasks:

Error: Missing transaction ID for this call.

Conditions:
-- Committing an iControl REST transaction.
-- The task does not contain any tasks within 120 seconds of creating the transaction.

Impact:
Unrelated error message can be confusing and increase troubleshooting time.

Workaround:
None.


794505-6 : OSPFv3 IPv4 address family route-map filtering does not work

Component: Local Traffic Manager

Symptoms:
Filtering IPv4 routes using route-map does not work. All the IPv4 redistributed routes fail to redistribute if the route-map is attached to the OSPFv3 IPv4 address-family.

Conditions:
1. Configure two OSPF sessions, one for the IPv4 address-family and the other for the IPv6 address family.
2. Redistribute kernel routes.
3. Check routes are propagated.
4. Add a route map to allow any IPv4 kernel route matching IP address.

Impact:
All routes fail to propagate and show that the IPv6 OSPF database external is empty. All IPv4 routes are blocked to redistribute instead of the routes mentioned in the route-map/prefix-list.

Workaround:
None.


794417-5 : Modifying enforce-tls-requirements to enabled on the HTTP/2 profile when renegotiation is enabled on the client-ssl profile should cause validation failure but does not

Component: Local Traffic Manager

Symptoms:
On a single virtual server, when 'TLS Renegotiation' is enabled in an associated Client SSL profile, the system should prevent enabling the 'Enforce TLS Requirements' option in the associated HTTP/2 profile.

Conditions:
BIG-IP system validation does not prevent this configuration in the following scenario:

1. Disable the 'Enforce TLS Requirements' option in the HTTP/2 profile.
2. Enable 'TLS Renegotiation' in the Client SSL profile.
3. Enable the 'Enforce TLS Requirements' option in the HTTP/2 profile.

Impact:
The configuration will not load if saved.

Workaround:
Do not simultaneously disable 'Enforce TLS Requirements' in the HTTP/2 profile, and enable 'TLS Renegotiation' in the Client SSL profile on a single virtual server.


794385-4 : BGP sessions may be reset after CMP state change

Component: Local Traffic Manager

Symptoms:
A CMP (Clustered Multiprocessing) state change occurs when the state of the BIG-IP system changes.

This happens in the following instances:
  - Blade reset.
  - Booting up or shutting down.
  - Running 'bigstart restart'.
  - Setting a blade state from/to primary/secondary.

During these events, there is a small chance that ingress ACK packet of previously established BGP connection is going to be disaggregated to the new processing group(TMMs) and selected TMM is ready to process traffic, but is not ready yet to process traffic for existing connection. In this case, connection isn't processed and reset instead.

Conditions:
-- VIPRION chassis with more than one blade.
-- CMP hash of affected VLAN is changed from the Default value, for example, to Source Address.
-- BGP peering is configured.
-- CMP state change is occurred on one of the blades.
-- BGP ingress ACK packet is disaggregated to TMM, which either wrong TMM or not ready to process the packet of already established connection

Impact:
Affected BGP peering is reset and dynamic routes learnt by the configured protocol are withdrawn, making it impossible to advertise dynamic routes of affected routing protocols from the BIG-IP system to the configured peers. This can lead to unexpected routing decisions on the BIG-IP system or other devices in the routing mesh.

In most cases, unexpected routing decisions are from networks learnt by affected routing protocols when the routing process on the BIG-IP system becomes unreachable. However, this state is short-lived, because the peering is recreated shortly after the routing protocol restarts. The peering time depends on the routing configuration and responsiveness of other routing devices connected to the BIG-IP system. It's the usual routing convergence period, which includes setting the peering and exchanging routing information and routes.

Workaround:
There is no workaround, but the issue was never seen with a configuration where CMP hash of affected VLAN is changed back to Default value.


793669-6 : FQDN ephemeral pool members on high availability (HA) pair does not get properly synced of the new session value

Component: Local Traffic Manager

Symptoms:
On a high availability (HA) paired device group configuration, where there are FQDN nodes as pool members in a pool, when the pool member is enabled or disabled on one device, and with config-sync, the other device does not fully update the peer. The template node gets updated with the new value, but the ephemeral pool member retains the old value.

Conditions:
Steps to Reproduce:
1. Configure HA, specifically a Device group (e.g., Failover) with two BIG-IP systems.
2. Create an HTTP pool (TEST_FQDN_POOL) and FQDN Pool Member on both systems.
3. Wait for the FQDN pool member to report as AVAIL_GREEN and the ephemeral node as AVAIL_BLUE on both systems.
4. Tmsh login to any of the systems.
5. Run the command:
tmsh run cm config-sync to-group Failover
6. Run the command:
tmsh modify ltm pool TEST_FQDN_POOL members modify { example.com:http { session user-disabled } }
7. Run the command:
tmsh run cm config-sync force-full-load-push to-group Failover

Impact:
FQDN pool member enabling/disabling is not being fully propagated to the other device after config-sync.

Workaround:
None.


791365-4 : Bad encryption password error on UCS save

Component: TMOS

Symptoms:
When a user with the admin role attempts to save a UCS with a passphrase, the following error is encountered:

[resource-admin@inetgtm1dev:Active:Standalone] ucs # tmsh save sys ucs /var/local/ucs/test-ucs passphrase password
Saving active configuration...
Error: Bad encryption password. <=========
Operation aborted.
/var/tmp/configsync.spec: Error creating package

WARNING:There are error(s) during saving.
        Not everything was saved.
        Be very careful when using this saved file!

Error creating package
Error during config save.
Unexpected Error: UCS saving process failed.

Conditions:
1) Log into the BIG-IP system as a user with admin role that has Advanced Shell access.
2) Attempt to create a UCS with a passphrase.

Impact:
Unable to save UCS with a passphrase.

Workaround:
This affects users logged in with the Admin role; you will be able to create a UCS with a passphrase while logged in as either the root user or as a user with the resource-admin role.


791061-6 : Config load in /Common removes routing protocols from other partitions

Component: TMOS

Symptoms:
While loading the /Common partition, config routing protocols on other partition route-domains will be removed.

Conditions:
-- Configure route-domains on other partitions with routing-protocols.
-- Load the /Common partition config alone.

Impact:
Routing protocols config from other partitions are removed.

Workaround:
Reload the config with the command:
load sys config partitions all


788645-6 : BGP does not function on static interfaces with vlan names longer than 16 characters.

Component: TMOS

Symptoms:
If a VLAN, VLAN group, or tunnel has a name with more than 15 characters, BGP does not function properly on that interface.

Conditions:
-- BGP Dynamic routing in use.
-- Interface name greater than 15 characters.

Impact:
BGP Dynamic Routing is not working.

Workaround:
1. Rename the interface using 15 or fewer characters.
2. Remove Static Binding and Bind to all interfaces.


788625-2 : A pool member is not marked up by the inband monitor even after successful connection to the pool member

Component: Service Provider

Symptoms:
1. Pool member is still shown as down even after BIG-IP has connected to it.
2. If a pool has only one pool member, continuous logs are seen in /var/log/ltm, at the frequency of auto-init interval and in-band timer interval mentioning about pool member being in-active and active respectively.

Conditions:
-- Auto-init is enabled to continuously try connecting the pool member
-- An inband monitor is configured
-- The inband monitor's retry interval is slightly less than auto-init interval

Impact:
Pool member marked down, even though the pool member is up

Workaround:
Configure the inband monitor's retry interval to be the lowest interval possible, which is 1 second.


788473-4 : Email sent from APM is not readable in some languages

Component: Access Policy Manager

Symptoms:
Email sent from APM is not readable in some languages.

Conditions:
APM administrator has configured Email Agent in the per-session policy.

Impact:
Users receiving the email in certain languages cannot read the email.

Workaround:
None.


788257-3 : Bigd.mgmtroutecheck setting ignored by in-tmm monitors after bigstart restart

Component: In-tmm monitors

Symptoms:
The bigd.mgmtroutecheck db variable can be enabled to prevent monitor traffic from going through the management interface (for information, see K14549: Overview of the 'bigd.mgmtroutecheck' database key :: https://support.f5.com/csp/article/K14549); however, if in-tmm monitors are configured, the setting will be ignored after a bigstart restart.

Conditions:
-- bigd.mgmtroutecheck is enabled
-- bigd.tmm is enabled (i.e., in-tmm monitors are configured).
-- tmm has a route configured to the management interface.
-- A pool member exists that matches a route through the management interface.
-- bigstart restart is performed.

Impact:
In-tmm monitor traffic uses the management interface if there is a route to the pool member via the management interface, even when bigd.mgmtroutecheck indicates it is enabled.

Workaround:
None


787677-6 : AVRD stays at 100% CPU constantly on some systems

Component: Application Visibility and Reporting

Symptoms:
One thread of the avrd process spontaneously starts to consume 100% CPU.

Conditions:
The exact conditions under which this occurs are unknown, but might occur only on vCMP configurations.

Impact:
System performance degrades.

Workaround:
Restart TMM:
bigstart restart tmm


785877-4 : VLAN groups do not bridge non-link-local multicast traffic.

Component: Local Traffic Manager

Symptoms:
VLAN groups do not bridge non-link-local multicast traffic.

Conditions:
-- VLAN groups configured.
-- Using non-link-local multicast traffic.

Impact:
Non-link-local multicast traffic does not get forwarded.

Workaround:
None.


785873-4 : ASM should treat 'Authorization: Negotiate TlR' as NTLM

Component: Application Security Manager

Symptoms:
When an authentication request with Authorization: Negotiate arrives to ASM. ASM does not count it as a login attempt. As a result brute force protection isn't applied.

Conditions:
-- ASM provisioned.
-- ASM policy attached to a virtual sever.
-- Login URL configured in ASM policy.
-- Brute force protection enabled in ASM policy.

Impact:
Brute force attack checking can be skipped if the backend server authorization type is NTLM but the client sends 'Authorization: Negotiate TlR'.

Workaround:
Use iRule which changes 'Authorization: Negotiate TlR' to NTLM on the client side (before ASM) and sets is back to the original value on the server side (after ASM)


785361-2 : In L2wire mode packets from srcIP 0.0.0.0 will be silently dropped

Component: Local Traffic Manager

Symptoms:
If the BIG-IP system is configured in L2Wire mode, packets from srcIP 0.0.0.0 are dropped.

Conditions:
L2Wire mode.

Impact:
All srcIP 0.0.0.0 packets are dropped silently.

Workaround:
Configure the virtual server to be in L2-forward mode.


785017-5 : Secondary blades go offline after new primary is elected

Component: TMOS

Symptoms:
Secondary active blades go offline.

Conditions:
-- Cluster with three or more active blades.
-- Primary blade is rebooted.

For example, on a 4-bladed system, after slot 1 (primary blade) was rebooted and slot 2 (secondary blade) takes over as primary, slots 3 and 4 both go offline due to high availability (HA) table, with the logs showing reason as 'waiting for configuration load'.

Impact:
Cluster reduced to a single blade, which may impact performance.

Workaround:
None.


781733-6 : SNMPv3 user name configuration allows illegal names to be entered

Component: TMOS

Symptoms:
The validation of SNMPv3 user names is not strict, and allows users of both the GUI and TMSH to enter badly formed user names. When the SNMP daemon reads these user names from the snmpd.conf file, validation rejects the names.

Conditions:
Poorly formed SNMPv3 user names can be entered into configuration, for example, names with embedded spaces.

Impact:
The user names are not accepted by the SNMP daemon when it reads the configuration from the snmpd.conf file.

Workaround:
Use alphanumeric characters for SNMPv3 user names, and do not include embedded spaces in the names.


780857-1 : HA failover network disruption when cluster management IP is not

Component: Local Traffic Manager

Symptoms:
If the cluster management IP address is not in the list of failover network unicast addresses, the blade management IP addresses in the unicast mesh will not be able to receive failover messages from peer devices.

Conditions:
-- VIPRION chassis or vCMP guest on a VIPRION chassis.
-- Per-blade management IP addresses listed in the failover network unicast mesh.
-- No cluster management IP address listed.

Impact:
The blade management IP addresses in the failover network unicast mesh stop functioning:

[root@VIP2200-R75-S5:/S1-green-P::Standby:In Sync] config # tmctl -w 200 -S sod_tg_conn_stat
entry_key local_failover_addr remote_device_name pkts_received transitions last_msg status
----------------------------- ------------------- ------------------------------ ------------- ----------- ---------- ------
10.200.75.8->10.10.10.1:1026 10.10.10.1:1026 VIP2200-R75-S8.sin.pslab.local 3249 3 1555399271 1
10.200.75.8->10.200.75.3:1026 10.200.75.3:1026 VIP2200-R75-S8.sin.pslab.local 0 1 0 0 <--
10.200.75.8->10.200.75.4:1026 10.200.75.4:1026 VIP2200-R75-S8.sin.pslab.local 0 1 0 0 <--

Workaround:
You can add an explicit management IP firewall rule to allow this traffic:

tmsh modify security firewall management-ip-rules rules add { accept_udp_1026 { place-before first ip-protocol udp destination { ports add { 1026 } } action accept } }

This will add a firewall policy so port 1026 is no longer locked down, and the blade management IP addresses in the unicast mesh should begin to function properly.


780745-4 : TMSH allows creation of duplicate community strings for SNMP v1/v2 access

Component: TMOS

Symptoms:
TMSH allows you to create multiple access records with the same IP protocol, same Source IP network, and same community string.

Conditions:
Duplicate access records are created in TMSH.

Impact:
Unintended permissions can be provided when an undesired access record with the correct community string is matched to a request instead of the desired access record.

Workaround:
Use the Configuration Utility to manage SNMP v1/2c access records. (The GUI properly flags the error with the message:
The specified SNMP community already exists in the database.

If you use tmsh, ensure that community strings remain unique within each Source IP Network for each IP protocol.


780437-7 : Upon rebooting a VIPRION chassis provisioned as a vCMP host, some vCMP guests can return online with no configuration.

Component: TMOS

Symptoms:
It is possible, although unlikely, for a vCMP host to scan the /shared/vmdisks directory for virtual disk files while the directory is unmounted.

As such, virtual disk files that existed before the reboot will not be detected, and the vCMP host will proceed to create them again.

The virtual disks get created again, delaying the guests from booting. Once the guests finally boot, they have no configuration.

Additionally, the new virtual disk files are created on the wrong disk device, as /shared/vmdisks is still unmounted.

Symptoms for this issue include:

-- Running the 'mount' command on affected host blades and noticing that /shared/vmdisks is not mounted.

-- Running the 'tmsh show vcmp guest' command on affected host blades (early on after the reboot) and noticing some guests have status 'installing-vdisk'.

-- Running the 'lsof' command on affected and unaffected host blades shows different device numbers for the filesystem hosting the virtual disks, as shown in the following example (note 253,16 and 253,1):

qemu-kvm 19386 qemu 15u REG 253,16 161061273600 8622659 /shared/vmdisks/s1g2.img

qemu-kvm 38655 qemu 15u REG 253,1 161061273600 2678798 /shared/vmdisks/s2g1.img

-- The /var/log/ltm file includes entries similar to the following example, indicating new virtual disks are being created for one of more vCMP guests:

info vcmpd[x]: 01510007:6: VDisk (s2g1.img/2): Adding.
info vcmpd[x]: 01510007:6: VDisk (s2g1.img/2): Syncing with MCP - [filename:s2g1.img slot:2 installed_os:0 state:0]
notice vcmpd[x]: 01510006:5: Guest (s2g1): Creating VDisk (/shared/vmdisks/s2g1.img)
info vcmpd[x]: 01510007:6: VDisk (s2g1.img/2): Syncing with MCP - [filename:s2g1.img slot:2 installed_os:0 state:1]
info vcmpd[x]: 01510007:6: Guest (s2g1): VS_ACQUIRING_VDISK->VS_WAITING_INSTALL
info vcmpd[x]: 01510007:6: Guest (s2g1): VS_WAITING_INSTALL->VS_INSTALLING_VDISK
notice vcmpd[x]: 01510006:5: Guest (s2g1): Installing image (/shared/images/BIGIP-12.1.2.0.0.249.iso) to VDisk (/shared/vmdisks/s2g1.img).
info vcmpd[x]: 01510007:6: VDisk (s2g1.img/2): Syncing with MCP - [filename:s2g1.img slot:2 installed_os:0 state:2]

Conditions:
-- VIPRION chassis provisioned in vCMP mode with more than one blade in it.

-- Large configuration with many guests.

-- The VIPRION chassis is rebooted.

-- A different issue, of type 'Configuration from primary failed validation' occurs during startup on one or more Secondary blades. By design, MCPD restarts once on affected Secondary blades, which is the trigger for this issue. An example of such a trigger issue is Bug ID 563905: Upon rebooting a multi-blade VIPRION or vCMP guest, MCPD can restart once on Secondary blades.

Impact:
-- Loss of entire configuration on previously working vCMP guests.

-- The /shared/vmdisks directory, in its unmounted state, may not have sufficient disk space to accommodate all the virtual disks for the vCMP guests designated to run on that blade. As such, some guests may fail to start.

-- If you continue using the affected guests by re-deploying configuration to them, further configuration loss may occur after a new chassis reboot during which this issue does not happen. This occurs because the guests would then be using the original virtual disk files; however, their configuration may have changed since then, and so some recently created objects may be missing.

Workaround:
There is no workaround to prevent this issue. However, you can minimize the risk of hitting this issue by ensuring you are running a software version (on the host system) where all known 'Configuration from primary failed validation' issues have been resolved.

If you believe you are currently affected by this issue, please contact F5 Networks Technical Support for assistance in recovering the original virtual disk files.


779137-6 : Using a source address list for a virtual server does not preserve the destination address prefix

Component: Local Traffic Manager

Symptoms:
Configuring a network virtual server with a source address list causes the system to treat the virtual server as a host.

Conditions:
-- Configure a source address list on the virtual server.
-- Configure a network address for the destination of the virtual server (not an address list).

Impact:
Traffic does not flow to the virtual server as expected.

Workaround:
None.


778501-3 : LB_FAILED does not fire on failure of HTTP/2 server connection establishment

Component: Local Traffic Manager

Symptoms:
When the server connection fails to be established due to server being down or actively rejecting the connection, LB_FAILED should fire and allow a new destination to be selected via iRule.

Conditions:
- iRule with LB_FAILED event
- server connection establishment fails

Impact:
Selection of a new destination via LB_FAILED is not possible, thus the client connection will be aborted.

Workaround:
No workaround available.


778225-4 : vCMP guests don't have the f5_api_com key and certificate installed when licensed by vCMP host

Component: Protocol Inspection

Symptoms:
Automatic hitless upgrade for protocol inspection fails on vCMP guests. This occurs because vCMP guest don't install f5_api_com key and certificates.

Conditions:
After licensing a vCMP guest, there is no f5_api_com key or certificate (you can run key_cache_path and crt_cache_path to determine that).

Impact:
Hitless upgrade fails for protocol inspection and traffic classification on vCMP guests.

Workaround:
Install the hitless upgrade IM package manually.


778041-4 : tcpdump fails with an unclear message when the 'epva' option is used on non-epva platforms (directly or through 'all' option)

Component: TMOS

Symptoms:
When tcpdump is invoked with the epva option on a non-epva platform (BIG-IP Virtual Edition, for example), it fails with an unclear message

errbuf:DPT Provider fatal error. Provider:ePVA Provider. No valid arguments.

Conditions:
-- Using a non-epva platform such as VE.
-- Calling the epva option:
  + Directly:
tcpdump -i 0.0 --f5 epva
  + Indirectly using 'all' (which includes epva):
tcpdump -i 0.0 --f5 all

Impact:
Unclear message does not give clear indication what the issue is, or how to get tcpdump to run with the 'all' option on non-epva platforms

Workaround:
Do not use the explicit epva option on non-epva platforms (it does not work anyway, as there is no epva debug information on those platforms).

Instead of 'all', explicitly specify other, non-epva providers on such platforms, for example, specifying 'noise' and 'ssl' providers:
tcpdump -i 0.0 --f5 n,ssl


777389-6 : In rare occurrences related to PostgreSQL monitor, the mcpd process restarts

Component: TMOS

Symptoms:
Possible indications include the following:

-- Errors such as the following may appear in ltm/log:

   - notice postgres[10872]: [466-1] WARNING: pgstat wait timeout.
   - notice sod[27693]: 01140041:5: Killing /usr/bin/mcpd pid 7144.
   - BD_CONF|ERR| ...failed to connect to mcpd after 5 retries, giving up...
   - BD_CONF|ERR| ...can't read message from mcp conn, status:16908291.
   - BD_MISC|CRIT| ...Received SIGABRT - terminating.

-- Errors such as the following may appear in the dwbld/log:

   - Couldn't send BLOB notification - MCP err 16908291.
   - Got a terminate/abort signal - terminating ...
   - Terminating mcp_bridge thread.

-- Processes may restart unexpectedly, including mcpd, bd, and postgresql.

Conditions:
-- The 'mcpd' process attempts to read monitoring data from the PostgreSQL server, but no data is available.

-- A contributing factor might be that the AFM module is licensed but not configured.

Impact:
Failing to receive a monitoring response from the SQL server, MCPD goes into an infinite loop and skips the heartbeat report, resulting in its restart. While MCPD is restarting, the system is offline and does not process traffic. After restart, system operation returns to normal.

Workaround:
The chance of occurrence can be minimized by making sure that control-plane processes have sufficient memory to run efficiently.


776489-6 : Remote authentication attempts to resolve only LDAP host against the first three name servers configured.

Component: TMOS

Symptoms:
'Login failed' is displayed on the BIG-IP system's login screen.

Conditions:
-- Remote authentication is enabled.
-- There are more than three name servers configured.

Impact:
Admins may not be able to log into the BIG-IP GUI with their admin user account if the first 3 configured DNS name servers are not reachable.

Workaround:
None.


775845-5 : Httpd fails to start after restarting the service using the iControl REST API

Component: TMOS

Symptoms:
After restarting httpd using the iControl REST API, httpd fails to start, even with a subsequent restart of httpd at the command line.

Similar to the following example:

config # restcurl -u admin:admin /tm/sys/service -X POST -d '{"name":"httpd", "command":"restart"}'
{
  "kind": "tm:sys:service:restartstate",
  "name": "httpd",
  "command": "restart",
  "commandResult": "Stopping httpd: [ OK ]\r\nStarting httpd: [FAILED]\r\n(98)Address already in use: AH00072: make_sock: could not bind to address n.n.n.n:n\nno listening sockets available, shutting down\nAH00015: Unable to open logs\n"
}

config # tmsh restart sys service httpd
Stopping httpd: [ OK ]
Starting httpd: [FAILED]

Conditions:
Restarting httpd service using iControl REST API.

Impact:
Httpd fails to start.

Workaround:
To recover from the failed httpd state, you can kill all instances of the httpd daemon and start httpd:

killall -9 httpd

tmsh start sys service httpd


775797-4 : Previously deleted user account might get authenticated

Component: TMOS

Symptoms:
A user account which may have originally been manually configured as a local user (auth user) but may have since been removed, might still get authenticated and be able to modify the BIG-IP configuration.

Conditions:
-- User account configured as local user.
-- The user account is deleted later.

(Note: The exact steps to produce this issue are not yet known).

Impact:
The deleted user that no longer exists in the local user list and which is also not explicitly authorized by remote role groups, can get authenticated. The deleted user is also able to modify the BIG-IP configuration via iControl.

Workaround:
None.


773577-6 : SNMPv3: When a security-name and a username are the same but have different passwords, traps are not properly crafted

Component: TMOS

Symptoms:
On an SNMPv3 configuration, when a security-name and a username are the same but have different passwords, traps are not properly crafted.

Conditions:
security-name is the same as an SNMPv3 username.

Impact:
SNMP traps cannot be decoded

Workaround:
Delete or rename user.


773173-3 : LTM Policy GUI is not working properly

Component: TMOS

Symptoms:
The GUI, is not displaying LTM policies created with a rule in which log criteria is 'action when the traffic is matched'.

Also, some of the Actions disappear while adding multiple actions in a rule.

Using tmsh shows the polices created in the GUI.

Conditions:
From the GUI, create LTM policies with a rule in which log criteria is 'action when the traffic is matched'.

Impact:
GUI is not displaying LTM policies created with log as action in rule.

Workaround:
Use tmsh.


767341-8 : If the size of a filestore file is smaller than the size reported by mcp, tmm can crash while loading the file.

Component: Local Traffic Manager

Symptoms:
Repeated TMM service crash SIGBUS with memory copy operation at the top of stack trace.

Conditions:
TMM loads filestore file and size of this file is smaller than the size reported by mcp or if this ifile store is not present at all.

This condition is possible due to
- filesystem errors/corruption or
- BIG-IP user intervention.

Filesystem error might be due to power loss, full disk or other reasons.

Impact:
TMM crash.
The program terminated with signal SIGBUS, Bus error.

Workaround:
Manual copy of the "good" ifile store and forceload on the previously bad unit. Usually trivial, but error prone.

Another workaround is clean install, if possible/acceptable


767305-6 : If the mcpd daemon is restarted by itself, some SNMP OIDs fail to return data the first time they are queried

Component: TMOS

Symptoms:
Upon querying a sysTmmStat* SNMP OID (for example, sysTmmStatTmUsageRatio5s), you find your SNMP client returns an error message similar to the following example:

No Such Instance currently exists at this OID

The very next time you query that same SNMP OID (or any other sysTmmStat* SNMP OID), you find they all work as expected and return the correct result.

Conditions:
This issue occurs after restarting only the mcpd daemon, i.e., running bigstart restart mcpd.

Impact:
All sysTmmStat* SNMP OIDs do not work until one of them is queried at least once, and the query is allowed to fail. After that, all sysTmmStat* SNMP OIDs work as expected.

Workaround:
Restart all services together, i.e., running the command: bigstart restart.

Should the mcpd daemon happen to be restarted on its own, you can simply ignore the error message and allow your SNMP polling station to fail a single polling cycle.

If you want to ensure that this issue does not occur, for example, so that your SNMP polling station does not generate unnecessary alarms, do not restart the mcpd daemon on its own, but rather restart all services together by running the following command:

bigstart restart


767217-4 : Under certain conditions when deleting an iRule, an incorrect dependency error is seen

Component: Local Traffic Manager

Symptoms:
If an iRule is being referenced by another iRule, and the reference is then removed, attempts to delete the formerly referenced iRule will result in an error similar to the following:

01070265:3: The rule (/Common/irule1) cannot be deleted because it is in use by a rule (/Common/irule2).

Conditions:
-- An iRule referencing another iRule.
-- The referencing iRule is in use.

Impact:
Unable to delete the iRule.

Workaround:
Save and re-load the configuration.


766593-6 : RESOLV::lookup with bytes array input does not work when length is exactly 4, 16, or 20

Component: Local Traffic Manager

Symptoms:
RESOLVE::lookup returns empty string.

Conditions:
Input bytes array is at length of 4, 16, or 20.

For example:
[RESOLV::lookup @dnsserveraddress -a [binary format a* $host1.d1test.com]]

Impact:
RESOLVE::lookup returns empty string.

Workaround:
Use lindex 0 to get the first element of the array.

For example:
[RESOLV::lookup @dnsserveraddress -a [lindex [binary format a* $host1.d1test.com] 0]]


764969-1 : ILX no longer supports symlinks in workspaces as of v14.1.0

Component: TMOS

Symptoms:
The GUI and TMSH report an error message if a symlink is present, and the workspace does not run. The error appears similar to the following:
General database error retrieving information.
General error: 01070711:3: boost::filesystem::status: Permission denied: "/var/ilx/workspaces/Common/test_links1/tmp_file" in statement [SELECT COUNT(*) FROM dev_workspace WHERE name LIKE '%'].

Conditions:
-- An ILX workspace is in the configuration.
-- The workspace contains a symlink.
-- Install the relevant rpm package with --no-bin-links (e.g., npm install <package-name> --no-bin-links).

Impact:
The ILX module is not accessible via the GUI, and the workspace with the symlink cannot be run.

Workaround:
1. Remove the symlink.
2. Copy the file into the workspace.


762097-4 : No swap memory available after upgrading to v14.1.0 and above

Component: TMOS

Symptoms:
After an upgrade to v14.1.0 or higher, swap memory may not be mounted. TMM or other host processes may restart due to lack of memory.

Conditions:
-- System is upgraded to v14.1.0 or above.

-- System has RAID storage.

Impact:
May lead to low or out-of-memory condition. The Linux oom killer may terminate processes, possibly affecting service.

Typically management activities may be impacted, for example, a sluggish GUI (config utility) or tmsh sessions.

Workaround:
Mount the swap volume with correct ID representing the swap device.

Perform the following steps on the system after booting into the affected software version:

1. Get the correct ID (RAID device number (/dev/md<number>)):
blkid | grep swap

Note: If there is no RAID device number, perform the procedure detailed in the following section.

2. Check the device or UUID representing swap in /etc/fstab.

3. If swap is not represented with the correct ID, modify the /etc/fstab swap entry to point to the correct device.

4. Enable the swap:
swapon -a

5. Check swap volume size:
swapon -s


If the blkid command shows there is no UUID associated with the swap RAID device, use the following procedure:

1. Generate a random UUID:
uuidgen

2. Make sure swap is turned off:
swapoff -a

3. Recreate the swap partition with UUID generated in step 1:
mkswap -U <uuid_from_step_1> <raid_device_from_step_1>

4. Run blkid again to make sure that you now have a UUID associated with the raid device:
blkid | grep swap

5. edit fstab and find the line
      <old_value> swap swap defaults 0 0

6. Replace the old value, whether it was an incorrect UUID or a device name, with the UUID generated in step 1, for example:
      UUID=8b35b30b-1076-42bb-8d3f-02acd494f2c8 swap swap defaults 0 0


760932-2 : Part of audit log messages are also in other logs when strings are long

Component: TMOS

Symptoms:
Parts of audit logs are found also in other logs like /var/log/user.log and /var/log/messages.

Conditions:
-- When audit log message strings are long.

Impact:
Log messages are duplicated. There is no indication of system functionality, and you can safely ignore them.

Workaround:
Modify the syslog-ng maximum length of incoming log messages from 8192 to 16384 bytes:

tmsh modify sys syslog include "options { log-msg-size(16384); };"


760740-4 : Mysql error is displayed when saving UCS configuration on BIG-IP system when MySQL is not running

Component: Protocol Inspection

Symptoms:
When saving the configuration to a UCS file, the process tries save the IPS learning information stored in the MySQL database.

MySQL runs only when particular modules are provisioned. If MySQL was previously running as a result of different provisioning, but is not currently running, saving the configuration to a UCS file succeeds, but the system reports a spurious message during the operation:

Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock.

Conditions:
-- Saving the configuration to a UCS file.
-- BIG-IP system provisioning only includes modules that do not require MySQL. These modules may include:
   + LTM
   + FPS
   + GTM (DNS)
   + LC
   + SWG
   + iLX
   + SSLo

-- BIG-IP system was previously provisioned with a module that starts MySQL, which results in the creation of the file /var/db/mysqlpw. These modules may include:
   + APM
   + ASM
   + AVR
   + PEM
   + AFM
   + vCMP

Impact:
The error message is cosmetic and has no impact on the UCS save process.

Workaround:
None.


760590-5 : TCP Verified-Accept with proxy-mss enabled does not honor the route-metrics cache when sending the SYN to the server

Component: Local Traffic Manager

Symptoms:
TCP Verified-Accept with proxy-mss enabled does not honor the route-metrics cache when sending the SYN to the server

Conditions:
-- TCP Verified-Accept option is used.
-- The proxy-mss is enabled.
-- The route-metrics cache entry is enabled.

Impact:
Route-metrics cache entry does not get used.

Workaround:
None.


760354-2 : Continual mcpd process restarts after removing big logs when /var/log is full

Component: TMOS

Symptoms:
Unit suddenly stops passing traffic. You might see errors similar to the following:

err mcpd[15230]: 01070596:3: An unexpected failure has occurred, TAP creation failed (tmm): Permission denied - net/validation/routing.cpp, line 168, exiting...

Conditions:
This might occur when when /var/log is full and then you remove big logs.

Impact:
The mcpd process restarts continuously. This occurs because tmm blocks mcpd from restarting after /var/log fills up.

Workaround:
Fix the logs and reboot the BIG-IP system.


759852-5 : SNMP configuration for trap destinations can cause a warning in the log

Component: TMOS

Symptoms:
The snmpd configuration parameters can cause net-snmp to issue a warning about deprecated syntax.

Conditions:
The use of a sys snmp command similar to the following to modify the snmpd.conf file:
sys snmp v2-traps { TRAP1 { host 1.2.3.4 community somestring } }

Impact:
net-snmp issues a warning that the syntax has been deprecated and reports a warning message in the log.

Workaround:
None.


759737-4 : Control and Analysis Plane CPU usage statistics are inaccurate for single core vCMP guests

Component: TMOS

Symptoms:
CPU usage statistics reported for Control and Analysis planes are not described properly for single-core vCMP guests.

Conditions:
A vCMP guest with a single core.

Impact:
CPU usage statistics report 0 Control Plane cores and 1 Analysis Plane core.

Workaround:
On a single core, two hyperthread vCMP guest, one hyperthread/CPU is dedicated to Data Plane while the other is dedicated to Control and Analysis Plane. All statistics attributed to the Analysis Plane in this CPU configuration are in fact the aggregate of Control Plane and Analysis Plane.


759590-7 : Creation of RADIUS authentication fails with service types other than 'authenticate only'

Component: TMOS

Symptoms:
RADIUS authentication can only have an initial service type of 'authenticate only'.

Conditions:
This is encountered when configuring RADIUS authentication via the GUI.

Impact:
If you change the Service Type to anything except Authenticate Only (default), Authentication creation fails, and the following error appears in /var/log/webui.log:

01020066:3: The requested RADIUS Authentication Configuration (/Common/system-auth) already exists in partition Common.

Workaround:
After configuring RADIUS authentication with 'authenticate only' as the service type, go back and change the service type to the desired option.


759258-6 : Instances shows incorrect pools if the same members are used in other pools

Component: TMOS

Symptoms:
Monitor 'Instances' tab shows incorrect pools if the same members are used in other pools.

Conditions:
Steps to Reproduce:

1. Create custom monitor or use system default.
2. Assign that monitor to a test pool.
3. Navigate to Local Traffic :: Monitors, click the test monitor, then select the Instances tab.

Impact:
The test pool is displayed, as well any other pools that use the same member or members (but with other monitors assigned).

Workaround:
None.


758491-4 : When using NetHSM integration, after upgrade to 14.1.0 or later (or creating keys using fipskey.nethsm), BIG-IP cannot use the keys

Component: Local Traffic Manager

Symptoms:
For Thales:
The ltm/log shows SSL handshake failures with similar lines (this is for Diffie-Hellman Key Exchange):

-- warning bigip1 tmm1[28813] 01260013 SSL Handshake failed for TCP 192.0.2.1:5106 -> 192.0.2.200:5607
-- warning bigip1 tmm1[28813] 01260009 Connection error: ssl_hs_vfy_sign_srvkeyxchg:13583: sign_srvkeyxchg (80)
-- debug bigip1 tmm1[28813] 01260036 FIPS acceleration device error: fips_poll_completed_reqs: req: 4 status: 0x1 : Cancel
-- err bigip1 pkcs11d[26259] 01680002 Key table lookup failed. error.

After enabling pkcs11d debug, the pkcs11d.debug log shows:

-- 2019-10-03 11:21:50 [6399] t00075a9a462b0000: pkcs11: 000008D9 D obj_match_attribute class CKO_PRIVATE_KEY attribute CKA_CLASS
-- 2019-10-03 11:21:50 [6399] t00075a9a462b0000: pkcs11: 000008D9 D obj_match_attribute type CKA_CLASS matches
-- 2019-10-03 11:21:50 [6399] t00075a9a462b0000: pkcs11: 000008D9 D obj_match_attribute class CKO_PRIVATE_KEY attribute CKA_ID
-- 2019-10-03 11:21:50 [6399] t00075a9a462b0000: pkcs11: 000008D9 D obj_match_attribute type CKA_ID does not match <===


For Safenet:
-- warning tmm1[17495]: 01260009:4: Connection error: ssl_hs_vfy_sign_srvkeyxchg:13544: sign_srvkeyxchg (80)
-- warning tmm1[17495]: 01260013:4: SSL Handshake failed for TCP 10.1.1.11:6009 -> 10.1.1.201:443
-- err pkcs11d[5856]: 01680002:3: Key table lookup failed. error.

Conditions:
1. Keys were created on earlier versions of BIG-IP software, no matter if using tmsh (Safenet) or using fipskey.nethsm (Thales, Safenet) and the device was upgraded to 14.1.0 or later.

2. Keys were created on BIG-IP v14.1.0 or later directly, using fipskey.nethsm (Thales). For Safenet, fipskey.nethsm was deprecated in 14.0.0.

Impact:
SSL handshake failures.

Workaround:
There are two workarounds:
-- Re-create the keys using tmsh command.

IMPORTANT: This workaround is suitable for deployments that are new and not in production.


-- Re-import the keys from nethsm using:
tmsh install sys crypto key <key_label> from-nethsm


You can find the key_label here:
-- The rightmost string in the output of the Thales command:
nfkminfo -l

-- The string after label= in the 'cmu list' command for Safenet.


758435-3 : Ordinal value in LTM policy rules sometimes do not work as expected

Component: Local Traffic Manager

Symptoms:
Which actions trigger in a first-match policy should depend on the ordinal of their rule. Sometimes, this does not work correctly.

Conditions:
The conditions under which this occurs are not known.

Impact:
LTM policy rules do not execute in the expected order.

Workaround:
It may be possible to re-arrange the rules to avoid the incorrect action execution.


757787-4 : Unable to edit LTM Policies that belong to an Application Service (iApp) using the WebUI.

Component: TMOS

Symptoms:
When creating a new rule or modifying an existing rule in a LTM Policy using the WebUI, the operation fails and an error similar to the following example is returned:

Transaction failed:010715bd:3: The parent folder is owned by application service (/Common/MyPolicy.app/MyPolicy), the object ownership cannot be changed to ().

Conditions:
-- The LTM Policy belongs to an Application Service (iApp).
-- The modification is attempted via the WebUI.

Impact:
Unable to make changes to existing LTM Policies.

Workaround:
Use the tmsh utility to make the necessary modifications to the LTM Policy. For example, the following command modifies an existing rule:

tmsh modify ltm policy myapp.app/Drafts/myapp_l7policy rules modify { 0 { conditions modify { 0 { http-method equals values { GET POST } } } } }


757279-4 : LDAP authenticated Firewall Manager role cannot edit firewall policies

Component: Advanced Firewall Manager

Symptoms:
The system posts the following message when the LDAP authenticated Firewall Manager role creates/modifies a firewall policy with rules or upgrading existing firewall policy:
User does not have modify access to object (fw_uuid_config).

Conditions:
-- Log in using an account with the Firewall Manager role.
-- Create/modify firewall policy with rules or upgrade existing firewall policy.

Impact:
Firewall modification operations fail with access to object (fw_uuid_config) error.

Workaround:
None.


757029-7 : Ephemeral pool members may not be created after config load or reboot

Component: Local Traffic Manager

Symptoms:
When using FQDN nodes and pool members, ephemeral pool members may not be created as expected immediately after a configuration-load or BIG-IP system reboot operation.

Conditions:
This may occur on affected BIG-IP versions when:

-- Multiple FQDN names (configured for FQDN nodes/pool members) resolve to the same IP address.
-- DNS queries to resolve these FQDN names occur almost simultaneously.

The occurrence of this issue is very sensitive to timing conditions, and is more likely to occur when there are larger numbers of FQDN names resolving to a common IP address.

Impact:
When this issue occurs, some subset of ephemeral pool members may not be created as expected.

As a result, some pools may not have any active pool members, and do not pass traffic.

This issue, when it occurs, may persist until the next DNS queries occur for each FQDN name, at which point the missing ephemeral pool members are typically created as expected. Using the default FQDN interval value of 3600 seconds, such downtime lasts approximately one hour.

Workaround:
To minimize the duration of time when pools may be missing ephemeral pool members, configure a shorter FQDN interval value for the FQDN nodes:

tmsh mod ltm node fqdn-node-name { fqdn { interval ## } }
Where ## is the desired number of seconds between successive DNS queries to resolve the configure FQDN name.


756812-4 : Nitrox 3 instruction/request logger may fail due to SELinux permission error

Component: Local Traffic Manager

Symptoms:
When the tmm Nitrox 3 queue stuck problem is encountered, the Nitrox 3 code tries to log the instruction/request, but it may fail due to SELinux permissions error.

The system posts messages in /var/log/ltm similar to the following:

-- crit tmm1[21300]: 01010025:2: Device error: n3-compress0 Nitrox 3, Hang Detected: compression device was reset (pci 00:09.7, discarded 54).
-- crit tmm1[21300]: 01010025:2: Device error: n3-compress0 Failed to open instruction log file '/shared/nitroxdiag/instrlog/tmm01_00:09.7_inst.log' err=2.

Conditions:
-- tmm Nitrox 3 queue stuck problem is encountered.
-- The Nitrox 3 code tries to log the instruction/request.

Impact:
Error messages occur, and the tmm Nitrox 3 code cannot log the instruction/request.

Workaround:
None.


756313-8 : SSL monitor continues to mark pool member down after restoring services

Component: Local Traffic Manager

Symptoms:
After an HTTPS monitor fails, it never resumes probing. No ClientHello is sent, just 3WHS and then 4-way closure. The pool member remains down.

Conditions:
-- The cipherlist for the monitor is not using TLSv1 (e.g., contains -TLSv1 or !TLSv1).
-- The pool member is marked down.

Impact:
Services are not automatically restored by the health monitor.

Workaround:
-- To restore the state of the member, remove it and add it back to the pool.

-- Remove !TLSv1 and -TLSv1 from the cipher string, if possible.


755976-5 : ZebOS might miss kernel routes after mcpd deamon restart

Component: TMOS

Symptoms:
After an mcpd daemon restart, sometimes (in ~30% of cases) ZebOS is missing some of kernel routes (virtual addresses).

One of the most common scenario is a device reboot.

Conditions:
-- Dynamic routing is configured.
-- Virtual address is created and Route Advertisement is configured:
imish -e 'sh ip route kernel'
-- mcpd daemon is restarted or device is rebooted.

Impact:
The kernel route (virtual address) is not added to the ZebOS routing table and cannot be advertised.

Workaround:
There are several workarounds; here are two:

-- Restart the tmrouted daemon:
bigstart restart tmrouted

-- Recreate the affected virtual address.


755791-7 : UDP monitor not behaving properly on different ICMP reject codes.

Component: Local Traffic Manager

Symptoms:
Unexpected or improper pool/node member status.

Conditions:
The BIG-IP system receives the ICMP rejection code as icmp-net/host-unreachable.

Impact:
The monitor might consider a server available when some type of ICMP rejection has been received that is not port unreachable.

Workaround:
You can use either of the following workarounds:
-- Use UDP monitors configured with a receive string.
-- Do not use UDP monitors.


755631-6 : UDP / DNS monitor marking node down

Component: Local Traffic Manager

Symptoms:
The UDP / DNS monitor marks nodes down.

Conditions:
-- UDP or DNS monitor configured.
-- Interval is multiple of timeout.
-- The response is delayed by over one interval.

Impact:
Pool member is marked down.

Workaround:
Increase the interval to be greater than the response time of the server.


754604-5 : iRule : [string first] returns incorrect results when string2 contains null

Component: Local Traffic Manager

Symptoms:
In an iRule such as 'string first $string1 $string2' returns incorrect results when $string2 contains a null byte and $string1 is not found within $string2. Performing the same search in tclsh, the expected -1 (not found) result is returned.

Conditions:
-- 'string first $string1 $string2' iRule.
-- string2 in an iRule contains a null byte.

Impact:
Operation does not return the expected -1 (not found) result, but instead returns an unexpected, random result.

Workaround:
None.


754335-4 : Install ISO does not boot on BIG-IP VE

Component: TMOS

Symptoms:
The install ISO does not boot on BIG-IP Virtual Edition (VE).

Conditions:
Attempting to boot a BIG-IP VE from a virtual DVD-ROM drive loaded with an affected ISO file.

Impact:
The system does not fully boot and hangs, preventing you from performing an installation or using the live environment for other recovery purposes.

Workaround:
To work around this issue, boot the BIG-IP VE from an ISO file earlier than 14.1.0. If necessary, install that version, and then upgrade to 14.1.0 using the live installer.


753526-8 : IP::addr iRule command does not allow single digit mask

Component: Local Traffic Manager

Symptoms:
When plain literal IP address and mask are used in IP::addr command, the validation fails if the mask is single digit.

Conditions:
The address mask is single digit.

Impact:
Validation fails.

Workaround:
Assign address/mask to a variable and use the variable in the command.


753501-6 : iRule commands (such as relate_server) do not work with MRP SIP

Component: Service Provider

Symptoms:
Some iRule commands (such as relate_server) fail when used in conjunction with Message Routing Protocol (MRP) SIP configurations using message routing transport.

Conditions:
-- MRP SIP configuration uses transport-config.
-- iRule command 'relate_server' is configured on the corresponding virtual server.

Impact:
iRule commands such as relate_server cannot be used with MRF SIP.

Workaround:
None.


752077-3 : Kerberos replay cache leaks file descriptors

Component: Access Policy Manager

Symptoms:
APMD reports 'too many open files' error when reading HTTP requests:

-- err apmd[15293]: 01490000:3: HTTPParser.cpp func: "readFromSocket()" line: 113 Msg: epoll_create() failed [Too many open files].
-- err apmd[15293]: 01490000:3: ApmD.cpp func: "process_apd_request()" line: 1801 Msg: Error 3 reading/parsing response from socket 1498. strerror: Too many open files, queue size 0, time since accept

There are file descriptor dumps in /var/log/apm showing many deleted files with name krb5_RCXXXXXX:

-- err apmd[15293]: 01490264:3: 1492 (/shared/tmp/krb5_RCx8EN5y (deleted)) : cloexec, Fflags[0x8002], read-write
-- err apmd[15293]: 01490264:3: 1493 (/shared/tmp/krb5_RCnHclFz (deleted)) : cloexec, Fflags[0x8002], read-write
-- err apmd[15293]: 01490264:3: 1494 (/shared/tmp/krb5_RCKGW8ia (deleted)) : cloexec, Fflags[0x8002], read-write

Conditions:
This failure may happen if the access policy uses Kerberos authentication, Active Directory authentication, or Active Directory query. The conditions under which the Kerberos replay cache leaks is unknown.

Impact:
APM end users experience intermittent log on issues.

Workaround:
None.


751451-1 : When upgrading to v14.0.0 or later, the 'no-tlsv1.3' option is missing from HTTPS monitors automatically created server SSL profiles

Component: Local Traffic Manager

Symptoms:
If there are HTTPS monitor objects that were created using BIG-IP software v12.x, when the BIG-IP is upgraded directly to v14.0.0 or later, the operation automatically creates server SSL profiles for the HTTPS monitors as needed. Those server SSL profile objects do not have 'no-tlsv1.3' included in their 'options' configuration.

Conditions:
-- Having HTTPS monitors configured in v12.x before upgrading.
-- Directly upgrading from v12.x to v14.0.0 or later

Impact:
TLSv1.3 gets enabled on the server SSL profiles.

Workaround:
-- To avoid this issue, upgrade from v12.x to v13.x, and then upgrade to v14.0.0 or later


-- To mitigate this issue, modify the affected profile to disable TLSv1.3.


751409-8 : MCP Validation does not detect when virtual servers differ only by overlapping VLANs

Component: TMOS

Symptoms:
It is possible to configure two virtual servers with the same address, port, and route domain, and have them overlap only in VLANs. MCP does not detect the overlap.

Errors like this may be seen in the ltm log:

err tmm1[29243]: 01010009:3: Failed to bind to address

Conditions:
Two (or more) virtual servers with the same address, port, and route domain, and have them overlap only in VLANs

Impact:
Traffic does not get routed properly.

Workaround:
There is no workaround other than ensuring that virtual servers that have the same address, port, and route domain have no overlap of VLANs.


749757 : -s option in qkview help does not indicate maximum size

Component: TMOS

Symptoms:
When running qkview with the -h option to obtain help, the -s (size) option is incorrectly rendered.

It should read:

[ -s <max file size> range:0-104857600 Bytes ]

Conditions:
-- Running qkview -h.
-- Viewing the -s (size) option help.

Impact:
The measurement size, bytes, is missing, which might result in confusion.

Workaround:
Use the -s option as normal, but be advised that the number should be in bytes, and that the maximum number is 104857600.


749528-7 : IVS connection on VLAN with no floating self-IP can select wrong self-IP for the source-address using SNAT automap

Component: Service Provider

Symptoms:
Under certain conditions the wrong self-IP can be selected as a source address for connections from an Internal Virtual Server to remote servers.

Conditions:
- Using an Internal Virtual Server (IVS).
- The VLAN being used to connect from the IVS to the server does not have a floating self-IP configured.
- At least one other VLAN has a floating self-IP configured.
- The primary virtual server that connects to the IVS is using SNAT automap.

Impact:
IVS traffic might not be routed properly.

Workaround:
- Configure a floating self-IP on the IVS server side VLAN.
or
- Use a SNAT pool instead of automap.


749332-1 : Client-SSL Object's description can be updated using CLI but not REST

Component: TMOS

Symptoms:
REST PUT fails to update the object description when proxy-ca-cert and proxy-ca-key are not configured, and triggers an error:
SSL forward proxy RSA CA key is missing.

Conditions:
Issue is seen only with REST, and when proxy-ca-cert and proxy-ca-key are not configured.

Impact:
REST cannot be used to update/modify the description.

Workaround:
You can use TMSH to update/modify the description, even if proxy-ca-cert and proxy-ca-key are not configured.


748886-1 : Virtual server stops passing traffic after modification

Component: Local Traffic Manager

Symptoms:
A virtual server stops passing traffic after changes are made to it.

Conditions:
-- Virtual server is using a port-list or address-list
-- High availability (HA) environment with multiple traffic groups
-- A change is made to the virtual server

Impact:
Every time you make changes to the virtual server, the traffic-group for the virtual address is changed, and traffic goes down.


748355-6 : MRF SIP curr_pending_calls statistic can show negative values.

Component: Service Provider

Symptoms:
Certain irregular SIP message patterns may produce an erroneous curr_pending_calls value that can drop below zero and underflow.

Conditions:
Uncommon message flows like re-transmitted INVITE or OK responses can trigger the issue, which may be brought about at times by lost packets when using UDP.

Impact:
SIP curr_pending_calls may show incorrect values.


747234-8 : Macro policy does not find corresponding access-profile directly

Component: Access Policy Manager

Symptoms:
The discovery task runs but does not apply the 'Access Access Policy' for the access policy for which the Provider is configured.

Conditions:
-- Auto-discovery is enabled for a provider.
-- Discovery occurs.

Impact:
The Access Policy is not applied after successful auto-discovery. The policy must be applied manually.

Workaround:
Apply the Access Policy manually after auto-discovery.


746984-6 : False positive evasion violation

Component: Application Security Manager

Symptoms:
When Referer header contains a backslash character ('\') in query string portion, 'IIS backslashes' evasion technique violation is raised.

Conditions:
-- 'Url Normalization' is turned on and 'Evasion Techniques Violations' is enabled.
-- Referer header contains a backslash character ('\') in query string part.

Impact:
False positive evasion technique violation is raised for Referer header.

Workaround:
Turn off 'Url Normalization' on the 'Normalization Settings' section of the 'referer' property on the HTTP Header Properties screen.


744924-3 : Bladed unit goes offline after UCS install

Component: TMOS

Symptoms:
Unit goes offline after UCS install. Secondary blades go offline. This lasts about a minute, and then the system goes back online.

Conditions:
After UCS install.

Impact:
-- Limited high availability (HA) capabilities (failover, sync, mirroring, etc.).
-- Cluster reduced to a single blade immediately after UCS install, which might impact performance.

Workaround:
None.


744316-7 : Config sync of APM policy fails with Cannot update_indexes validation error.

Component: Access Policy Manager

Symptoms:
Config sync operation fails for APM policy when policy item of same name points to different agent on source and target

The system posts errors similar to the following:

Sync error on rfang-vemgmt.lab.labnet.com: Load failed from /Common/rfang-ve-3mgmt.lab.labnet.com 01070734:3: Configuration error: DB validation exception, unique constraint violation on table (access_policy_item_agent) object ID (/Common/resm_act_message_box_1 /Common/resm_act_message_box_ag_1). A duplicate value was received for a non-primary key unique index field. DB exception text (Cannot update_indexes/checkpoint DB object, class:access_policy_item_agent status:13)"

Conditions:
This occurs in the following scenario:

1. Configure a failover device group containing two BIG-IP systems.
2. Create an APM access profile on one unit.
  + Launch VPE for the policy.
  + Add a macro.
  + In macro add an agent, e.g., Message box.
  + Add macro to the main policy.
3. Initiate config sync to another device.
4. On one BIG-IP system, add another Message box agent using the same macro. On the other BIG-IP system, make a copy of the access profile.
5. On either BIG-IP system, initiate another config sync operation.

Impact:
Unable to sync configuration in a failover device group.

Workaround:
You can work around this using the following procedure:

1. On the device receiving the config sync, delete the APM policies that contain the referenced APM policy items.
2. Perform an overwrite-config-sync operation from the sending device to this device.


743253-1 : TSO in software re-segments L3 fragments.

Component: Local Traffic Manager

Symptoms:
FastL4 does not re-assemble fragments by default, but on a system with software-enabled TSO (sys db tm.tcpsegmentationoffload value disable), those fragments are erroneously re-segmented.

Conditions:
The behavior is encountered on BIG-IP Virtual Edition when setting sys db tm.tcpsegmentationoffload value disable, but does not cause a tmm core on Virtual Edition.

Impact:
Already-fragmented traffic is fragmented again.

Workaround:
None


742764-1 : The raccoon daemon is spawned more then once on startup, one fails and cores.

Component: TMOS

Symptoms:
On BIG-IP startup tmipsecd starts a racoon daemon for each route domain, including the default rd 0.

If for any reason racoon fails to fully start, tmipsecd will start another instance of racoon.

When this occurs, one or both of them may crash and create a core file.

Conditions:
-- BIG-IP becomes Active or racoon is (re)started.
-- IPsec does not have to be configured for this failure to occur.

Impact:
IPsec IKEv1 tunnels might delay starting while racoon restarts.


742753-6 : Accessing the BIG-IP system's WebUI via special proxy solutions may fail

Component: TMOS

Symptoms:
If the BIG-IP system's WebUI is accessed via certain special proxy solutions, logging on to the system may fail.

Conditions:
This issue is known to happen with special proxy solutions that do one of the following things:

- Remove the Referer header.

- Modify the HTTP request in such a way that the Referer and Host headers no longer tally with one another.

Impact:
Users cannot log on to the BIG-IP system's WebUI.

Workaround:
As a workaround, you can do any of the following things:

- Access the BIG-IP system's WebUI directly (i.e., bypassing the problematic proxy solution).

- Modify the proxy solution so that it does not remove the Referer header (this is only viable if the proxy does not alter the Host header).

- Modify the proxy solution so that it inserts compatible Referer and Host headers.


742419-3 : BIG-IP NIC teaming of SR-IOV interfaces does not work under VMware ESXi

Component: TMOS

Symptoms:
Configuring multiple SR-IOV interfaces into a trunk does not function correctly when running BIG-IP as a guest under VMware ESXi. The interface will show as uninitialized.

Conditions:
A system that passes SR-IOV virtual functions directly to a BIG-IP guest when running on VMware ESXi.

Impact:
The trunk will fail to initialize.

Workaround:
None.


742105-4 : Displaying network map with virtual servers is slow

Component: TMOS

Symptoms:
The network map loads slowly when it contains lots of objects.

Conditions:
Load the network map in a configuration that contains 1000 or more objects.

Impact:
The network map loads very slowly.

Workaround:
None.


741702-1 : TMM crash

Component: TMOS

Symptoms:
TMM crashes during normal operation.

Conditions:
-- This can occur while passing normal traffic.
-- In this instance, APM and LTM are configured.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


739820-8 : Validation does not reject IPv6 address for TACACS auth configuration

Component: TMOS

Symptoms:
TACACS authentication does not support IPv6 address for the authentication server, but both GUI and TMSH allow IPv6 addresses to be configured for TACACS. Such configurations may result in failed logins with messages in /var/log/secure like

Aug 8 10:47:39 gtm-13108-174 err httpd[5948]: pam_tacplus: skip invalid server: 2001::1001:1001 (invalid port: no digits)

Conditions:
Use the GUI or TMSH to create or modify a TACACS server

Impact:
Remote authentication will fail unless a second server is configured with IPv4 address.

Workaround:
Do not configure IPv6 address for TACACS server


739507-4 : Improve recovery method for BIG-IP system that has halted from a failed FIPS integrity check

Component: TMOS

Symptoms:
After FIPS 140-2 license is installed on BIG-IP FIPS-certified hardware devices, the system halts while booting upon performing the FIPS integrity check.

Console shows messages similar to:
  Starting System Logger Daemon...
  [ OK ] Started System Logger Daemon.
  [ 14.943495] System halted.

Conditions:
-- The BIG-IP device has a license that includes the FIPS 140-2 option (FIPS full-box license).
-- System element monitored by FIPS 140-2 integrity check has changed.
-- The device is rebooted.

Impact:
The device halts and cannot be used.

Workaround:
Workaround:
[1] Connect a terminal to the BIG-IP serial console port.
[2] From the console, enter the GRUB menu and boot into a partition that does not have a FIPS 140-2-enabled license, or into TMOS Maintenance.
[3] Mount config from the inactive partition (see K51222154: Mounting the filesystem of an inactive partition :: https://support.f5.com/csp/article/K51222154) that was halted, and examine the contents of /config/f5_public/fipserr, which shows the files that were changed, leading to failure of the FIPS 140-2 license-enabled partition.
[4] Restore those files to their original ones.
[5] Truncate the inactive partition's /config/f5_public/fipserr, e.g., by running:
   cat /dev/null > /mnt/test/f5_public/fipserr
[6] Reboot.

If the system still halts, repeat from Step [1] above, until this no longer happens.


739118-6 : Manually modifying a self IP address in bigip_base.conf file and reloading the configuration results in routing misconfiguration

Component: TMOS

Symptoms:
Changing existing self IP addresses in bigip_base.conf file directly. After uploading the changed configuration file, BIG-IP routing service provides out of date Self IP route information to dependent services.

Conditions:
- Self IP address is configured on the BIG-IP system.
- Manually change the IP address of a self IP in bigip_base.conf file.
- Load changed configuration via tmsh.

Impact:
Different services have different route information:
-- tmsh table - has the old route.
-- Dynamic routing - hHas the old and new routes.
-- Kernel table - has the new route.

Workaround:
There are two workarounds, preventive and corrective.
Preventive:
Do not manually change self IP addresses in bigip_base.conf file. It is not recommended way to add/change BIG-IP configuration. Use GUI or tmsh instead.

Corrective:
If changed configuration is uploaded. In GUI or tmsh, delete changed self IP address, and then create a self IP address with old IP address and delete it as well. Now, all affected routes are removed.


738964-5 : Instruction logger debugging enhancement

Component: Local Traffic Manager

Symptoms:
Specific platforms may experience a zip-engine lock-up for various reasons. When it happens, the symptoms follow a report pattern that declares the zip-engine requires reset. When resets persist, the instruction logger is unable to diagnose the value of the instructions sent to the zip-engine.

Conditions:
Invalid or unusual compression source data.

Impact:
Compression device goes off-line and CPU usage spikes as it takes over all compression responsibility. Lack of instruction logging makes it difficult to diagnose what occurred.

Workaround:
Disable hardware compression until issue is fixed.


738865-7 : MCPD might enter into loop during APM config validation

Component: Access Policy Manager

Symptoms:
Mcpd crashes after a config sync.

Conditions:
This can occur during configuration validation when APM is configured.

Impact:
Mcpd may take too long to validate the APM configuration and is killed by watchdog, causing a core

Workaround:
Use the Visual Policy Editor to configure access policy instead of tmsh commands.

The Visual Policy Editor does not allow policies to be created if they contain loops.


738547-5 : SAML Sax Parser returns error when importing metadata file that contains certain UTF-8 encoded characters other than ASCII

Component: Access Policy Manager

Symptoms:
When SAML metadata file that contains certain UTF-8 characters other than ASCII is imported, SAML SAX Parser returns error

Conditions:
When SAML metadata file contains certain UTF-8 characters other than the ASCII set,

Impact:
SAML metadata file is not imported, and the system reports an error. SAML configuration on BIG-IP systems is impacted.

Workaround:
Remove the non-ASCII UTF-8 characters, and try the import operation again.


737739-3 : Bash shell still accessible for admin even if disabled

Component: TMOS

Symptoms:
With the administrator role, you have an option in TMUI to disable or restrict terminal access. If you disable or restrict access, the corresponding REST endpoint is neither disabled nor restricted.

Conditions:
Use TMUI as the admin, or as a user with the administrator role, and either of the following:
-- Disable terminal access.
-- Restrict access to TMSH.

Impact:
Users with the Administrator role can obtain shell access via REST.

With terminal access disabled:
-- If you attempt to login using SSH, you will not be to do so.
-- If you make a POST request to the /mgmt/tm/util/bash endpoint with a body that includes a command to run, that command will be run.

With access to TMSH restricted:
-- A POST request to the /mgmt/tm/util/bash endpoint that includes a body with a command to run will be run.

Workaround:
None.


730852-5 : The tmrouted repeatedly crashes and produces core when new peer device is added

Component: TMOS

Symptoms:
There is a tmrouted crash when new peer device is added.

Conditions:
The conditions under which this occurs are unknown.

Impact:
Core produced. Tmrouted crashes repeatedly. Dynamic routing for all route domains is temporarily disrupted.

Workaround:
Have MCP force load as described in K13030: Forcing the mcpd process to reload the BIG-IP configuration (https://support.f5.com/csp/article/K13030).


725646-1 : The tmsh utility cores when multiple tmsh instances are spawned and terminated quickly

Component: TMOS

Symptoms:
A tmsh core occurs when multiple tmsh instances are spawned and terminated quickly

/var/log/kern.log:
info kernel: tmsh[19017]: segfault ...

system messages in /var/log/messages:
notice logger: Started writing core file: /var/core/-tmsh ...

/var/log/audit:
notice -tmsh[19010]: 01420002:5: AUDIT - pid=19010 ...

Conditions:
This issue occurs intermittently in the following scenario:

1. Open multiple instances of tmsh using the following command pattern:
tmsh
run util bash
tmsh
run util bash
tmsh
run util bash
tmsh
run util bash
...
2. Quickly terminate them using Ctrl-D or by closing terminal.

Impact:
The tmsh utility crashes and produces a core file in the /shared/core directory. The BIG-IP system remains operational.

Workaround:
Restart tmsh if the problem occurs.

To prevent the issue from occurring: Do not quickly terminate tmsh instances using Ctrl-D.


723112-7 : LTM policies does not work if a condition has more than 127 matches

Component: Local Traffic Manager

Symptoms:
LTM policies do not work if number of matches for a particular condition exceeds 127.

Conditions:
LTM policy that has a condition with more than 127 matches.

Impact:
LTM policy does not match the expected condition.

Workaround:
There is no workaround at this time.


718573-4 : Internal SessionDB invalid state

Component: TMOS

Symptoms:
TMM crashes.

Conditions:
SessionDB is accessed in a specific way that results in an invalid state.

Impact:
TMM crashes. Traffic disrupted while tmm restarts.

Workaround:
None.


717806-6 : In the case of 'n' bigd instances, uneven CPU load distribution is seen when a high number of monitors are configured

Component: Local Traffic Manager

Symptoms:
Load average peaks are observed when a high number of monitors (>= 200) are configured across 'n' bigd instances.

Conditions:
When a high number of monitors are configured across 'n' bigd instances. CPU load peaks appear and disappear periodically.

Impact:
No performance impact

Workaround:
None


717174-4 : WebUI shows error: Error getting auth token from login provider

Component: Device Management

Symptoms:
Occasionally, the BIG-IP Admin Utility TMUI fails to function correctly and produces the following error:
Error getting auth token from login provider.

This occurs when the BIG-IP REST Daemon restjavad fails to start up properly.

Conditions:
This error most often occurs on the first or second boot after upgrade, and more often on Virtual Edition BIG-IP platforms running on oversubscribed or slow hypervisors.

Impact:
TMUI and any other BIG-IP system components that rely on REST Workers such as: OpenID Connect key rotation discovery, portions of the TMOS Web Configuration Utility, and Guided Configuration (AGC and WGC) fail to function properly.

Workaround:
Restarting the BIG-IP REST daemons restjavad and restnoded will usually correct the problem. To do so, connect to the SSH console and issue the following two commands:

bigstart restart restjavad
bigstart restart restnoded


716746-4 : Possible tmm restart when disabling single endpoint vector while attack is ongoing

Component: Advanced Firewall Manager

Symptoms:
tmm restarts.

Conditions:
-- AFM DoS single endpoint (sweep or flood) vector is configured.
-- The attack is ongoing.
-- The attack vector is being mitigated in hardware (HW).
-- The vector is manually disabled.

Impact:
tmm can crash and restart. Traffic disrupted while tmm restarts.

Workaround:
If you do not want to mitigate, set the mitigation_threshold to infinite.

Note: Do not disable the single endpoint vectors when an attack is ongoing and the vector is being mitigated in HW.


713183-5 : Malformed JSON files may be present on vCMP host

Component: TMOS

Symptoms:
Malformed JSON files may be present on vCMP host.

Conditions:
All needed conditions are not yet defined.

- vCMP is provisioned.
- Guests are deployed.
- Software versions later than 11.6.0 for both guest/host may be affected.

Impact:
Some vCMP guests may not show up in the output of the command:
 tmsh show vcmp health

In addition, there might be files present named using the following structure:
 /var/run/vcmpd/<guestname>/json/sys-(ha-status|provision|software).json.bad.

There is no functional impact to the guests or to the host, other than these lost tables, which are provided as a convenience to the vCMP host administrator.

Workaround:
None.


712542-6 : Network Access client caches the response for /pre/config.php

Component: Access Policy Manager

Symptoms:
The Network Access client caches the response for /pre/config.php.

Conditions:
-- APM is provisioned.
-- Network Access is configured.

Impact:
Caching the response for /pre/config.php might reveal configuration information. However, a URL is public information by definition. The only sensitive information revealed are server names, which have to be revealed in order for the client to know where to connect.

Workaround:
None.


712241-7 : A vCMP guest may not provide guest health stats to the vCMP host

Component: TMOS

Symptoms:
A vCMP guest usually provides the vCMP host with some guest health statistics as a convenience to the vCMP host administrator. These stats are:
-- mgmt/tm/sys/ha-status
-- mgmt/tm/sys/software/status
-- mgmt/tm/sys/software/provision

These tables are created by the host when host vcmpd queries the guest over the vmchannel using REST.

These RESTful queries may sometimes fail, causing the queried vCMP guest to be omitted in the display of the output of the following command: $ tmsh show vcmp guest

Conditions:
-- vCMP provisioned.
-- Guests are deployed.
-- Host vcmpd queries the guest over the vmchannel using REST.

Impact:
There is no functional impact to the guests or to the host, other than these lost tables.

-- Some vCMP guests may not show up in the output of the following command: tmsh show vcmp health
-- Some guests may appear with the wrong status in the GUI. Such as being grey when it should be green.
-- Files containing guest information, kept in:
/var/run/vcmpd/<guestname>/json/(sys-ha-status.json|sys-provision.json|sys-software.json) may be missing from that directory.
-- There might be files present there named using the following structure:
 /var/run/vcmpd/<guestname>/json/sys-(ha-status|provision|software).json.bad.

Workaround:
There is no workaround at this time.


708680-4 : TMUI is unable to change the Alias Address of DNS/GTM Monitors

Component: Global Traffic Manager (DNS)

Symptoms:
TMUI (the GUI) is unable to change the Alias Address of DNS/GTM Monitors.

Conditions:
-- Using the GUI.
-- DNS/GTM monitors with alias address.
-- Attempting to change the Alias Address.

Impact:
Cannot change the Alias Address.

Workaround:
Use tmsh.


707294-5 : When BIG-IP as OAuth AS has missing OAuth Profile in the Access profile, the error log is not clear

Component: Access Policy Manager

Symptoms:
When the BIG-IP system configured as OAuth AS has a missing OAuth Profile in the Access profile, the error log is not clear. It shows an error indicating 'OAuth mode is not set' instead of showing 'OAuth Profile is not configured'. In this case, the error 'OAuth mode is not set' means that the OAuth Profile is not associated in the Access profile of the virtual server acting as BIG-IP OAuth Authentication server.

Conditions:
-- The BIG-IP system is configured as OAuth AS.
-- The Access profile is not configured with OAuth profile.

Impact:
Confusing error message that leads to delay in troubleshooting the OAuth configuration.

Workaround:
Configure an OAuth Profile in the Access profile of the virtual server acting as BIG-IP OAuth AS.


705387-4 : HTTP/2, ALPN and SSL

Component: Local Traffic Manager

Symptoms:
The SSL filter will not always add the ALPN extension.

Conditions:
If the negotiated cipher is not HTTP/2 compliant, the SSL filter may not add the ALPN extension.

Impact:
The failure to add the ALPN extension may result in the failure to negotiate the proper protocol.

Workaround:
There is no workaround at this time.


703678-4 : Cannot add 'secure' attributes to several ASM cookies

Component: Application Security Manager

Symptoms:
There is an option to add 'secure' attribute to ASM cookies.
There are some specific cookies which this option does not apply on.

Conditions:
-- ASM policy is attached to the virtual server.
-- Internal parameter 'cookie_secure_attr' flag is enabled, along with either of the following:
   + Using HTTPS traffic.
   + The 'assume https' internal parameter is also enabled.
-- Along with one of the following:
   + Web Scraping' feature is enabled.
   + 'Bot Detection' feature is enabled.
   + The 'brute force' feature is enabled using CATPCHA.

Impact:
Some cookies do not have the 'secure' attributes.

Workaround:
None.


700639-1 : The default value for the syncookie threshold is not set to the correct value

Component: Local Traffic Manager

Symptoms:
The default value for connection.syncookies.threshold should be set to 64000. Instead, this value defaults to 16384.

Conditions:
This issue may be encountered when a virtual server uses syncookies.

Impact:
The connection.syncookies.threshold value will be lower than intended, possibly resulting in lower performance.

Workaround:
Use tmsh to manually set the threshold value:
# tmsh modify sys db connection.syncookies.threshold value 64000


699758-3 : Intermittent connection resets are seen in HTTP/2 gateway when HTTP/2 preface is sent to server

Component: Local Traffic Manager

Symptoms:
HTTP/2 connection in gateway scenario is reset when HTTP/2 preface makes it to the server instead of being consumed by the BIG-IP system. The backend connection to the server in gateway scenario is an HTTP/1 connection. The connection is reset when HTTP/2 preface is sent on the backend connection instead of being consumed by the BIG-IP system.

Conditions:
HTTP/2 gateway is configured.

Impact:
HTTP/2 connection reset is seen.

Workaround:
None.


696755-6 : HTTP/2 may truncate a response body when served from cache

Component: Local Traffic Manager

Symptoms:
BIG-IP systems provide a client-side HTTP/2 Gateway protocol implementation in conjunction with HTTP 1.x on a server side. A response can be cached on the BIG-IP system with a web acceleration profile. Sometimes a response served from cache is prematurely marked with END_STREAM flag, causing the client to ignore the rest of the response body.

Conditions:
BIG-IP system has a virtual server for which HTTP/2 and Web Acceleration profiles are configured.

Impact:
Some clients' browsers do not retry a resource, causing incorrect rendering of an HTML page.

Workaround:
Adding the following iRule causes the body to be displayed:

when HTTP_RESPONSE_RELEASE {
    set con_len [string trim [HTTP::header value Content-Length]]
    HTTP::header remove Content-Length
    HTTP::header insert Content-Length "$con_len"
}


696363-5 : Unable to create SNMP trap in the GUI

Component: TMOS

Symptoms:
Trying to create a SNMP trap may fail in the GUI with the following error message: An error has occurred while trying to process your request.

Conditions:
-- Trap destinations are configured using the GUI: When trap destinations are configured in the GUI, the trap name is generated using the destination IP address.
-- Traps of the same destination address were previously created and deleted.

Impact:
GUI parameter checking does not work as expected. BIG-IP Administrator is unable to create a SNMP trap session.

Workaround:
To work around this issue when using the GUI, remove all traps that have the same destination address as the new one that failed. Then re-add your destination.

Tip: You can use tmsh to create/delete/modify SNMP traps, which enables viewing of the generated names, making it easier to understand what error has occurred.


692218-7 : Audit log messages sent from the primary blade to the secondaries should not be logged.

Component: TMOS

Symptoms:
Audit log messages sent from the primary blade to the secondaries are logged.

Conditions:
Multi-blade platform.

Impact:
Unnecessary messages in the log file.

Workaround:
None.


690928-2 : System posts error message: 01010054:3: tmrouted connection closed

Component: TMOS

Symptoms:
Beginning in BIG-IP 12.0.0, the tmrouted process pushes dynamic routes directly to the Traffic Management Microkernel (TMM). This message indicates the system is shutting down and is expected behavior during the reboot or shutdown process. The appearance of this message on a stable running system may indicate an issue with tmrouted functionality.

System posts the following message in /var/log/ltm: 01010054:3: tmrouted connection closed

Conditions:
This message occurs when all of the following conditions are met:

-- You have configured the BIG-IP system to use dynamic routing.
-- The BIG-IP system is in the process of shutting down or rebooting.

Impact:
This message is benign, unless you view the message on a stable running system. In this case, the message may indicate an issue with the tmrouted process.

Workaround:
None.


689147-4 : Confusing log messages on certain user/role/partition misconfiguration when using remote role groups

Component: TMOS

Symptoms:
When using remote role groups to set user/role/partition information, user login fails, but logs in /var/log/secure indicate that authentication was successful.

Errors similar to the following appear in /var/log/ltm:

-- User restriction error: The administrator, resource administrator, auditor and web application security administrator roles may not be restricted to a single partition.
-- Input error: invalid remote user credentials, partition does not exist, broken-partition

Errors similar to the following appear in /var/log/secure:

tac_authen_pap_read: invalid reply content, incorrect key?

Conditions:
Using remote role groups to set user/role/partition information for remote users, and either of the following:
-- A remote user is configured with the role of administrator, resource administrator, auditor, or web application security administrator, with access to a particular partition, rather than all. (These roles require access to all partitions.)
-- A remote user is configured with partition access set to a partition that does not exist on the BIG-IP system.

Impact:
The messages in /var/log/secure may be confusing and make it more difficult to diagnose the login failure.

Workaround:
Check /var/log/ltm for more specific error messages.


680855-5 : Safari 11 sometimes start more than one session

Component: Access Policy Manager

Symptoms:
In Safari 11 after session is finished and being restarted by "Click here to establish a new session" more than one session appears. It looks like Safari 11 beta and release bug.

Conditions:
Safari 11 beta and official release
Policy with webtop
Several passes from start to finish

Impact:
At certain point browser is reaching max sessions per IP and hangs on webtop.

Workaround:
Don't use Safari 11 for now


675911-11 : Different sections of the GUI can report incorrect CPU utilization

Solution Article: K13272442

Component: TMOS

Symptoms:
The following sections of the GUI can report incorrect or higher than expected CPU utilization:

-- The 'download history' option found in the Flash dashboard.

-- Statistics :: Performance :: Traffic Report (section introduced in version 12.1.0).

Values such as 33%, 66%, and 99% may appear in these sections despite the system being completely idle.

Conditions:
HT-Split is enabled (default for platforms that support it).

Impact:
The CPU history in the exported comma-separated values (CSV) file does not match actual CPU usage.

Workaround:
-- You can obtain CPU history through various other means. One way is to use the sar utility.

   - In 12.x and higher versions:
     sar -f /var/log/sa6/sa

   - or for older data:
     sar -f /var/log/sa6/sa.1

   - The oldest data is found compressed in /var/log/sa6 and must be gunzipped before use.


   - In 11.x:
     sar -f /var/log/sa/sa

   - or for older data
     sar -f /var/log/sa/sa.1

   - The oldest data is found compressed in /var/log/sa and must be gunzipped before use.

-- Live CPU utilization can also be obtained through the Performance Graphs, SNMP polling, iControl polling, various command-line utilities such as top, etc.


675772-3 : IPsec tunnels fail when traffic-selectors share one IPsec interface mode policy

Component: TMOS

Symptoms:
When IPsec tunnels to several different peers are configured using a single ipsec-policy in interface mode, the tunnels will be unreliable or may not start.

Conditions:
Several traffic-selectors that are associated with different tunnels reference the same interface mode IPsec policy.

Note: It is not possible to create this configuration when the IPsec policy is tunnel or transport mode.

Impact:
IPsec tunnels may start but fail after a period of time. In other cases, IPsec tunnels may not start at all.

Workaround:
(1) Create a unique ipsec-policy configuration object for each remote peer and traffic-selector.
(2) Use tunnel mode. It is not possible to create this configuration when the IPsec policy is tunnel or transport mode.


673573-7 : tmsh logs boost assertion when running child process and reaches idle-timeout

Component: TMOS

Symptoms:
An idle-timeout occurs while running a sub-process in interactive mode, resulting in a log message. tmsh logs a benign but ominous-looking critical error to the console and to /var/log/ltm if a tmsh command reaches idle timeout and a spawned sub-process is still running.

The errors in /var/log/ltm begin with the following text:
    'boost assertion failed'

Conditions:
-- tmsh command reaches idle timeout.
-- Spawned sub-process is still running.

Impact:
Although the wording indicates a failure, the message is benign and you can safely ignore it.

Workaround:
None.


673272-1 : Search by "Signature ID is" does not return results for some signature IDs

Component: Application Security Manager

Symptoms:
Search by "Signature ID is" does not return results for some signature IDs.

Conditions:
Request associated with signature that was previously enforced and is now in staging after the attack signature update.

Impact:
You are unable to filter requests by some signature IDs.


671545-3 : MCPD core while booting up device with error "Unexpected exception caught"

Component: TMOS

Symptoms:
Mcpd crashes.

Conditions:
The file-store path is missing with specific configuration file which is needed by mcpd while booting.

Impact:
Traffic and control plane disrupted while mcpd restarts.


662301-1 : 'Unlicensed objects' error message appears despite there being no unlicensed config

Component: TMOS

Symptoms:
An error message appears in the GUI reading 'This device is not operational because the loaded configuration contained errors or unlicensed objects. Please adjust the configuration and/or the license, and re-license the device.' Examination of the configuration and license shows that there are no configuration error or unlicensed configuration objects. The device is operational.

Conditions:
The BIG-IP system is licensed and the configuration loaded.

Impact:
Error message appears in the GUI stating that the device is not operational. However, the device is operational.

Workaround:
Restart mcpd by running the following command:
bigstart restart mcpd


658943-4 : Errors when platform-migrate loading UCS using trunks on vCMP guest

Component: TMOS

Symptoms:
During platform migration from a physical BIG-IP system to a BIG-IP vCMP guest, the load fails with one of these messages:

01070687:3: Link Aggregation Control Protocol (LACP) is not supported on this platform. Unexpected Error: Loading configuration process failed.

01070338:3: Cannot create trunk [name of trunk], maximum limit reached Unexpected Error: Loading configuration process failed.

Conditions:
-- The source device is a physical BIG-IP device with one or more trunks with or without LACP in its configuration.
-- The destination device is a vCMP guest.

Impact:
The platform migration fails and the configuration does not load.

Workaround:
You can use either of the following Workarounds:

-- Remove all trunks from the source configuration prior to generation of the UCS.

-- After the UCS load fails, edit the configuration manually on the destination to remove trunk references, and then reload the configuration.


658850-4 : Loading UCS with the platform-migrate parameter could unexpectedly set or unset management DHCP

Component: TMOS

Symptoms:
When you load a UCS file using the platform-migrate parameter, the mgmt-dhcp value (enabled, disabled, or unset) will overwrite the value on the destination. Depending on the effect, this could change the destination's management IP and default management route.

If the UCS does not have mgmt-dhcp explicitly written out, note that its value is treated as the default for the local system, which varies by the type of system. On Virtual Edition (VE) platforms, the default is to enable DHCP. On all other platforms, the default is to disable DHCP.

Conditions:
This occurs when loading a UCS using the platform-migrate parameter:
tmsh load sys ucs <ucs_file_from_another_system> platform-migrate

Impact:
Changing the mgmt-dhcp value on the destination can result in management changing from statically configured to DHCP or DHCP to statically configured. This can result in loss of management access to the device, requiring in-band or console access.

Workaround:
If you want to reset the target device to use a static IP, run the following commands after loading the UCS with the platform-migrate command:

tmsh modify sys global-settings mgmt-dhcp disabled
tmsh create sys management-ip <ip>/<mask>
tmsh delete sys management-route default
tmsh create sys management-route default gateway <ip>


646768-5 : VCMP Guest CM device name not set to hostname when deployed

Solution Article: K71255118

Component: TMOS

Symptoms:
When you access the vCMP guest instance after you deploy the system, the instance uses the hostname bigip1.

Conditions:
This issue occurs when all of the following conditions are met:

-- The BIG-IP system is running v11.6.0 or earlier.
-- You configure a vCMP guest instance that is running BIG-IP v11.6.0 or later.
-- You have configured the vCMP guest instance with a hostname other than bigip1.
-- You deploy the vCMP guest instance.

Impact:
The vCMP guest does not use the configured hostname.

Workaround:
-- In tmsh, run the following commands, in sequence:

 mv cm device bigip1 HOSTNAME
 save sys config

-- Rename the device name in the GUI.


640374-3 : DHCP statistics are incorrect

Component: Local Traffic Manager

Symptoms:
DHCP statistics are incorrect if DHCP server is down while a new virtual server is created. And when the DHCP server comes back up, the current pending transactions are incorrect.

Conditions:
-- DHCP relay configured.
-- DHCP server is down while the virtual server is created.

Impact:
The 'current pending transactions' for the DHCP server is incorrect if the DHCP server is down while a new virtual server is created.

Workaround:
None.


631083-6 : Some files in home directory are overwritten on password change

Component: TMOS

Symptoms:
The files

  .bash_logout
  .bash_profile
  .bashrc

in a user's home directory are overwritten when that user's password is changed.

Conditions:
Change a user's password.

Impact:
Customizations to these files would be lost on password change. This only applies to users with advanced shell access.

Workaround:
Back up the files to a different location before making a password change.


625807-2 : Tmm cores in bigproto_cookie_buffer_to_server

Component: Local Traffic Manager

Symptoms:
TMM cores on SIGSEGV during normal operation.

Although the exact triggering conditions are unknown, it might that when a connection is aborted in a client-side iRule, the reported log signature may indicate its occurrence:

tmm3[11663]: 01220009:6: Pending rule <irule_name> <HTTP_REQUEST> aborted for <ip> -> <ip>.

Conditions:
Specific conditions that trigger this issue are unknown.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


615934-7 : Overwrite flag in various iControl key/certificate management functions is ignored and might result in errors.

Component: TMOS

Symptoms:
Overwrite flag in key/certificate management iControl functions is ignored and might result in errors.

Conditions:
If there is an existing key/certificate, and the key/certificate management iControl/SOAP functions are used to overwrite the key/certificate by setting the overwrite flag, the flag is ignored, and an error is returned.

Impact:
Key/certificate overwrite using iControl operations might fail.


603693-1 : Brace matching in switch statement of iRules can fail if literal strings use braces

Solution Article: K52239932

Component: TMOS

Symptoms:
In the TMUI on any iRule editing page, brace matching within a switch statement can fail if a literal string is surrounded with braces.

Conditions:
Use a literal string surrounded with curly braces for a case/pattern within a switch statement.

Impact:
Incorrect brace matching.

Workaround:
Instead of surrounding the literal string with braces, use double quotes.


597955-4 : APM can generate seemingly spurious error log messages

Component: Access Policy Manager

Symptoms:
Internally detected issues can trigger a series of error log messages. The logs look alarming, but can be considered diagnostic in the case there is an actual behavioral issue that needs to be analyzed.

The system reports the following messages in /var/log/apm:
-- err tmm1[11197]: 01490514:3: 00000000: Access encountered error: ERR_VAL. File: ../modules/hudfilter/access/access.c, Function: access_slowpath_security_check, Line: 6648
-- err tmm8[18022]: 01490514:3: 00000000: Access encountered error: ERR_ARG. File: ../modules/hudfilter/access/access.c, Function: access_sanitize_uri, Line: 16406
-- err tmm8[18022]: 01490514:3: 00000000: Access encountered error: ERR_ARG. File: ../modules/hudfilter/access/access.c, Function: access_check_uri_type, Line: 11219
-- err tmm8[18022]: 01490514:3: 00000000: Access encountered error: ERR_ARG. File: ../modules/hudfilter/access/access.c, Function: access_process_state_client_classify_req, Line: 3308
-- err tmm8[18022]: 01490514:3: 00000000: Access encountered error: ERR_ARG. File: ../modules/hudfilter/access/access.c, Function: hud_access_handler, Line: 2311

Conditions:
An internal software API call triggers an unexpected result.

Impact:
Logs might give the appearance of many issues, even if there are no behavioral anomalies.

Workaround:
None.


574762-3 : Forwarding flows leak when a routing update changes the egress vlan

Component: Local Traffic Manager

Symptoms:
Forwarding flow doesn’t expire and leaks a connflow object.

Conditions:
Conditions to hit this are a route change on forwarded flows.

Impact:
Memory leak.

Workaround:
None


554228-10 : OneConnect does not work when WEBSSO is enabled/configured.

Component: Access Policy Manager

Symptoms:
OneConnect is a feature that reuses server-side connections. When WEBSSO is enabled, it always creates a new server-side connection, and doesn't reuse pooled connections.

Conditions:
WEBSSO and OneConnect.

Impact:
Idle serverside connections that should be eligible for reuse by the virtual server are not used. This might lead to build-up of idle serverside connections, and may result in unexpected 'Inet port exhaustion' errors.

Workaround:
None.


538283-1 : iControl REST asynchronous tasks may block other tasks from running

Component: TMOS

Symptoms:
If an iControl REST asynchronous task is running, other iControl REST queries (synchronous or asynchronous) will wait until the asynchronous task completes before executing. If the asynchronous task is long-running, subsequent requests will block for a long time.

Conditions:
-- Executing an iControl REST task asynchronously.
-- Performing further iControl REST tasks (synchronous or asynchronous) while the asynchronous task is still running.

Impact:
Potential (and unexpected) long wait times while running a task asynchronously.

Workaround:
None.


528894-5 : Config sync after sub-partition config changes results extra lines in the partition's conf file

Component: TMOS

Symptoms:
Config sync after sub-partition config changes results extra lines in the partition's conf file.

Conditions:
Make changes under any partition except /Common and then config sync without overwrite.

Impact:
/config/partitions/partition_name/bigip_base.conf in the partitions folder has trunk and ha-group configuration. /config/bigip_base.conf no longer has the trunk and ha-group configuration.

Workaround:
'Sync Device to Group' with 'Overwrite Configuration' enabled.


499348-12 : System statistics may fail to update, or report negative deltas due to delayed stats merging

Component: TMOS

Symptoms:
Under some conditions, the BIG-IP system might fail to report statistics over time. This can manifest as statistics reporting unchanging statistics (e.g., all zeroes (0)), or as sudden spikes in traffic, or as negative deltas in some counters.

The system performance graphs will also appear to have gaps / be missing data at the times that this occurs.

Conditions:
This occurs when there are frequent changes occurring to the underlying statistics data structures. This might occur under the following conditions:

-- The system is spawning/reaping processes on a frequent basis (e.g., when there is a large number of external monitors).

-- iRules are frequently using 'SSL::profile' to select different SSL profiles on a virtual server (this can cause per-virtual server, per-profile statistics to be created and deleted on a regular basis).

Impact:
Statistics fail to merge, which results in incorrect view of system behavior and operation.

Workaround:
This issue has two workarounds:

1. Reduce the frequency of changes in the statistics data structures. The specific action to take depends on what is triggering them. To do so, use any or all of the following:

-- Reduce the frequency of configuration changes.
-- Reduce the use of 'SSL::profile' in iRules.
-- Reduce the number/frequency of processes being spawned by the system.

2. Switch statistics roll-ups to the 'slow_merge' method, which causes the system to spend more CPU merging statistics. To do so, set the 'merged.method' DB key to 'slow_merge' using the following command:
    tmsh modify sys db merged.method value slow_merge.


486712-8 : GUI PVA connection maximum statistic is always zero

Component: TMOS

Symptoms:
The GUI PVA connection maximum statistic is always zero, regardless of the number of PVA connections established.

Conditions:
This occurs when fastL4 connections are used.

Impact:
The customer cannot determine the maximum number of PVA connections because the stat is always zero.


472645-3 : Memory issues when there is a lot of data in /var/annotate (annotations for dashboard)

Component: TMOS

Symptoms:
When there is a large number annotations in /var/annotate, tomcat might run out of memory when the dashboard requests the annotations.

The tomcat process logs an out-of-memory error, and the dashboard reports an error:
-- SEVERE: Servlet.service() for servlet org.apache.jsp.dashboard.annotations_jsp threw exception
java.lang.OutOfMemoryError: Java heap space.
-- Unrecoverable Communications Error. Please close this window and log in via the BIG-IP Configuration Utility.

Conditions:
-- Large number of configuration events, i.e., too many annotations in /var/annotate.
-- Click anything other than the default '5 minutes' tab.

Impact:
The the dashboard attempts to load all annotations into memory, but cannot. Dashboard must be restarted and can only be used at the 5-minute zoom level.

Workaround:
-- Delete the files in /var/annotate.

-- Increase the tomcat memory:
provision.tomcat.extramb = 320


469724-4 : When evaluation/demonstration features expire, features enabled by both evaluation and perpetual licenses also expire

Component: TMOS

Symptoms:
Evaluation features cause perpetual features to expire when the evaluation license expires.

Conditions:
-- Perpetual license with an evaluation/demonstration add-on feature.
-- The add-on license expires or is expired.

Impact:
When an evaluation/demonstration add-on license expires, features included in both the evaluation add-on as well as the regular, perpetual license stop working.

This behavior is covered in F5 article K4679: BIG-IP evaluation and demonstration licenses do expire :: https://support.f5.com/csp/article/K4679.

Workaround:
To work around this issue, activate the license from the command line:

When reactivating an existing license, and deactivating an expired evaluation license key, specify the base registration key and add-on (if any), and use the -i option for the expired evaluation license key in the get_dossier command.

For example, if the expired evaluation license key is ABCDEFG-ZZZZZZZ, use the following command:

get_dossier -b ABCDE-ABCDE-ABCDE-ABCDE-ABCDEFG -a ABCDEFG-ABCDEFG -i ABCDEFG-ZZZZZZZ

You can find these steps detailed in K2595: Activating and installing a license file from the command line :: https://support.f5.com/csp/article/K2595. This part in particular is required to work around this issue


431503-9 : TMSH crashes in rare initial tunnel configurations

Solution Article: K14838

Component: TMOS

Symptoms:
In rare BigIP configuration scenarios, TMM may crash during its startup process when the tunnel configurations are loaded.

Conditions:
During TMM startup, a tunnel is created, then immediately removed during the configuration load period, when TMM neighbor messages may be in flight via the tunnel. When the race condition fits, the neighbor message may land on an invalid tunnel.

Impact:
TMM crash in rare race conditions.

Workaround:
None.


385013-1 : Certain user roles do not trigger a sync for a 'modify auth password' command

Component: TMOS

Symptoms:
If users with the certain roles change their password, the BIG-IP system does not detect that it is out-of-sync with its peer and does not trigger an automatic sync:

Conditions:
-- Multiple BIG-IP devices in a Device Service Cluster that sync configurations with each other.
-- A user with one of the following roles logs in and changes their password:
  + guest
  + operator
  + application-editor
  + manager
  + certificate-manager
  + irule-manager
  + resource-admin
  + auditor

Impact:
The system does not detect that it is out of sync with its peer, and does not report this condition. If automatic sync is enabled, a sync does not automatically occur.

Workaround:
Force a full sync to the peer systems.


382363-2 : min-up-members and using gateway-failsafe-device on the same pool.

Solution Article: K30588577

Component: TMOS

Symptoms:
The system does not require setting a pool's min-up-members greater than 0 (zero) when also using gateway-failsafe-device on the same pool.

Conditions:
A pool's min-up-members is 0 when gateway-failsafe-device is set.

Impact:
Failure to set min-up-members greater than 0 when using gateway-failsafe-device might cause errors. The tmm might crash.

Workaround:
Set min-up-members greater than 0 when using gateway-failsafe-device.


315765-1 : The BIG-IP system erroneously performs a SNAT translation after the SNAT translation address has been disabled.

Component: Local Traffic Manager

Symptoms:
The BIG-IP system erroneously performs a SNAT translation after the SNAT translation address has been disabled. As a result of this issue, you may encounter the following symptom:

A network trace capturing the affected traffic on a BIG-IP system shows traffic continues to egress the BIG-IP system using the disabled SNAT translation address.

Conditions:
This issue occurs when the following condition is met: A SNAT translation address is configured, but disabled.

Impact:
Traffic egresses the BIG-IP system with the disabled SNAT translation address.

Workaround:
To work around this issue, you must delete the affected SNAT configuration instead of disabling it. To do so, perform the following procedure:

Impact of workaround: Deleting the affected SNAT configuration removes it entirely from the BIG-IP configuration. If you require the SNAT configuration later, you must recreate it manually.

BIG-IP 11.x/12.x

1. Log in to the tmsh utility.
2. Delete the affected SNAT configuration by entering the following command: delete /ltm snat <affected SNAT name>.

For example, to delete the test-315765 SNAT configuration, you would enter the following command: delete /ltm snat test-315765.

3. Save the modified configuration by entering the following command:
save /sys config

BIG-IP 9.x through 10.x

1. Log in to the command line.
2. Delete the affected SNAT configuration by entering the following command: bigpipe snat <affected SNAT name> delete.

For example, to delete the test-315765 SNAT configuration, you would enter the following command: bigpipe snat test-315765 delete.

3. Save the modified configuration by entering the following command: bigpipe save all.


264701-6 : GTM: zrd exits on error from bind about .jnl file error (Formerly CR 68608)

Solution Article: K10066

Component: Global Traffic Manager (DNS)

Symptoms:
The zrd process exits and cannot be restarted.

Conditions:
This occurs when the journal is out-of-sync with the zone.

Impact:
The zrd process cannot be restarted.

Workaround:
Before beginning, ensure that no one else is making config changes (i.e., consider making changes during a maintenance window).

I) On a working system, perform the following:
1. # rndc freeze $z

(Do this for all nonworking zones. Do not perform the thaw until you finish copying all needed files to the nonworking system.)

2. # tar zcvf /tmp/named.zone.files namedb/db.[nonworking zones].
3. # rndc thaw $z

II) On each nonworking system, perform the following:
1. # bigstart stop zrd; bigstart stop named
2. Copy the nonworking /tmp/named.zone.files from a working GTM system.
3. # bigstart start named; bigstart start zrd.

(Before continuing, review /var/log/daemon.log for named errors, and review /var/log/gtm for zrd errors0.)

Repeat part II until all previously nonworking systems are working.

III) On a working GTM system, run the following command:
# touch /var/named/config/named.conf.




This issue may cause the configuration to fail to load or may significantly impact system performance after upgrade


*********************** NOTICE ***********************

For additional support resources and technical documentation, see:
******************************************************