Supplemental Document : BIG-IP 16.1.3.3 Fixes and Known Issues

Applies To:

Show Versions Show Versions

BIG-IP APM

  • 16.1.3

BIG-IP Analytics

  • 16.1.3

BIG-IP Link Controller

  • 16.1.3

BIG-IP LTM

  • 16.1.3

BIG-IP PEM

  • 16.1.3

BIG-IP AFM

  • 16.1.3

BIG-IP FPS

  • 16.1.3

BIG-IP DNS

  • 16.1.3

BIG-IP ASM

  • 16.1.3
Updated Date: 01/10/2023

BIG-IP Release Information

Version: 16.1.3.3
Build: 3.0

Note: This content is current as of the software release date
Updates to bug information occur periodically. For the most up-to-date bug data, see Bug Tracker.

The blue background highlights fixes


Cumulative fixes from BIG-IP v16.1.3.2 that are included in this release
Cumulative fixes from BIG-IP v16.1.3.1 that are included in this release
Cumulative fixes from BIG-IP v16.1.3 that are included in this release
Cumulative fixes from BIG-IP v16.1.2.2 that are included in this release
Cumulative fixes from BIG-IP v16.1.2.1 that are included in this release
Cumulative fixes from BIG-IP v16.1.2 that are included in this release
Cumulative fixes from BIG-IP v16.1.1 that are included in this release
Known Issues in BIG-IP v16.1.x

Vulnerability Fixes

ID Number CVE Links to More Info Description Fixed Versions
982785-2 CVE-2022-25946 K52322100 Guided Configuration hardening 17.0.0, 16.1.3.3, 15.1.8
1143073-4 CVE-2022-41622 K94221585, BT1143073 iControl SOAP vulnerability CVE-2022-41622 16.1.3.3, 15.1.8.1
1106161-2 CVE-2022-41800 K13325942, BT1106161 Securing iControlRest API for appliance mode 16.1.3.3, 15.1.8.1


Functional Change Fixes

None


TMOS Fixes

ID Number Severity Links to More Info Description Fixed Versions
1113385-4 3-Major BT1113385 Expired REST tokens are not getting deleted from /var/run/pamcache on standalone BIG-IP 16.1.3.3, 15.1.8.1
1103369-2 3-Major BT1103369 DELETE of REST auth token does not result in deletion of the pamcache token file on a multi slot VIPRION chassis or vCMP guest 16.1.3.3, 15.1.8.1
1073005-2 3-Major   iControl REST use of the dig command does not follow security best practices 16.1.3.3, 15.1.8.1
1032553-5 3-Major   Core when virtual server with destination NATing receives multicast 16.1.3.3, 15.1.8


Local Traffic Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1134085-2 2-Critical BT1134085 Intermittent TMM core when iRule is configured with SSL persistence 16.1.3.3, 15.1.8.1
1112445-2 2-Critical   Fix to avoid zombie node on the chain 16.1.3.3
890917-8 3-Major   Performance may be reduced while processing SSL traffic 16.1.3.3, 15.1.8.1
1093821-4 3-Major   TMM may behave unexpectedly while processing HTTP traffic 16.1.3.3
1062569-1 3-Major   HTTP/2 stream bottom filter leaks memory at teardown under certain conditions 16.1.3.3


Global Traffic Manager (DNS) Fixes

ID Number Severity Links to More Info Description Fixed Versions
1107437-3 2-Critical   TMM may crash when enable-rapid-response is enabled on a DNS profile 16.1.3.3, 15.1.8.1


Application Security Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1105389-4 3-Major   Incorrect HTTP request handling may lead to resource leak 16.1.3.3, 15.1.8


Access Policy Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1122473-4 2-Critical   TMM panic while initializing URL DB 16.1.3.3
1174873-3 3-Major BT1174873 The location header query string separate is converted from "?" to "%3F" breaking multi-domain 16.1.3.3, 15.1.8.1
1065917-2 3-Major   BIG-IP APM Virtual Server does not follow security best practices 16.1.3.3, 15.1.7


Carrier-Grade NAT Fixes

ID Number Severity Links to More Info Description Fixed Versions
1085077-4 1-Blocking   TMM may crash while processing SIP-ALG traffic 17.0.0, 16.1.3.3, 15.1.8
1083225-2 2-Critical   TMM may crash while processing SIP traffic 17.0.0, 16.1.3.3, 15.1.8.1



Cumulative fixes from BIG-IP v16.1.3.2 that are included in this release


Vulnerability Fixes

ID Number CVE Links to More Info Description Fixed Versions
1106289-2 CVE-2022-41624 K43024307, BT1106289 TMM may leak memory when processing sideband connections. 17.0.0.1, 16.1.3.2, 15.1.7, 14.1.5.2, 13.1.5.1
1068821 CVE-2022-41806 K00721320, BT1068821 TMM may crash when processing AFM NAT64 policy 16.1.3.2


Functional Change Fixes

None


Local Traffic Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1137037 2-Critical BT1137037 System boots into an inoperative state after installing engineering hotfix with FIPS 140-2/140-3 license in version 16.1.x 16.1.3.2



Cumulative fixes from BIG-IP v16.1.3.1 that are included in this release


Vulnerability Fixes

ID Number CVE Links to More Info Description Fixed Versions
1104493-1 CVE-2022-35272 K90024104, BT1104493 Client-side abort during server-side establishment may cause tmm to behave abnormally in HTTP MRF proxy 17.0.0.1, 16.1.3.1
1093621-2 CVE-2022-41832 K10347453 Some SIP traffic patterns over TCP may cause resource exhaustion on BIG-IP 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1, 13.1.5.1
1085729-2 CVE-2022-41836 K47204506, BT1085729 bd may crash while processing specific request 17.0.0.1, 16.1.3.1, 15.1.7
1076397-1 CVE-2022-35735 K13213418, BT1076397 TMSH hardening 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1073841-1 CVE-2022-34862 K66510514, BT1073841 URI normalization does not function as expected 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5
1073357-2 CVE-2022-34862 K66510514, BT1073357 TMM may crash while processing HTTP traffic 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5
1067505-4 CVE-2022-34651 K59197053, BT1067505 TMM may crash while processing TLS traffic with HTTP::respond 17.0.0, 16.1.3.1, 15.1.6.1
1066673-1 CVE-2022-35728 K55580033, BT1066673 BIG-IP Configuration Utility(TMUI) does not follow best practices for managing active sessions 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1024029-2 CVE-2022-35245 K58235223, BT1024029 TMM may crash when processing traffic with per-session APM Access Policy 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
919357-8 CVE-2022-41770 K22505850, BT919357 iControl REST hardening 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
881809-8 CVE-2022-41983 K31523465, BT881809 Client SSL and Server SSL profile hardening 17.0.0, 16.1.3.1, 15.1.7, 14.1.5.1
740321-1 CVE-2022-34851 K50310001, BT740321 iControl SOAP API does not follow current best practices 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1084013-4 CVE-2022-36795 K52494562, BT1084013 TMM does not follow TCP best practices 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1081153-2 CVE-2022-41813 K93723284, BT1081153 TMM may crash while processing administrative requests 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5
1073549-1 CVE-2022-35735 K13213418, BT1073549 TMSH hardening 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1055925-1 CVE-2022-34844 K34511555, BT1055925 TMM may crash while processing traffic on AWS 17.0.0, 16.1.3.1, 15.1.6.1
1043281-6 CVE-2021-3712 K19559038, BT1043281 OpenSSL vulnerability CVE-2021-3712 17.0.0, 16.1.3.1, 15.1.6.1
1006921-1 CVE-2022-33962 K80970653, BT1006921 iRules Hardening 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1063641-4 CVE-2022-33968 K23465404, BT1063641 NTLM library hardening 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1063637-4 CVE-2022-33968 K23465404, BT1063637 NTLM library hardening 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


Functional Change Fixes

ID Number Severity Links to More Info Description Fixed Versions
1036057-1 3-Major BT1036057 Add support for line folding in multipart parser. 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1025261-3 3-Major BT1025261 Restjavad uses more resident memory in control plane after software upgrade 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1071621-1 4-Minor BT1071621 Increase the number of supported traffic selectors 17.0.0.1, 16.1.3.1, 15.1.6.1


TMOS Fixes

ID Number Severity Links to More Info Description Fixed Versions
1120433-2 1-Blocking BT1120433 Removed gtmd and big3d daemon from the FIPS-compliant list 16.1.3.1
989517-3 2-Critical BT989517 Acceleration section of virtual server page not available in DHD 17.0.0.1, 16.1.3.1, 15.1.6.1
957637-1 2-Critical BT957637 The pfmand daemon can crash when it starts. 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
936501-1 2-Critical BT936501 Scp to /var/local/ucs or /var/local/scf is not allowed when fips140 or common criteria mode is enabled 16.1.3.1
1097193-2 2-Critical BT1097193 Unable to SCP files using WinSCP or relative path name 16.1.3.1
1076921-1 2-Critical BT1076921 Hostname in BootMarker logs and /var/log/ltm logs that are sourced from TMM are getting truncated 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1048853-1 2-Critical BT1048853 "IKE VBUF" memory leak debug. 17.0.0, 16.1.3.1, 15.1.7
1041865-4 2-Critical K16392416, BT1041865 Correctable machine check errors [mce] should be suppressed 17.0.0, 16.1.3.1, 15.1.7
992121-4 3-Major BT992121 REST "/mgmt/tm/services" endpoint is not accessible 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
720610-4 3-Major BT720610 Automatic Update Check logs false 'Update Server unavailable' message on every run 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.2.7, 13.1.3
1123149 3-Major BT1123149 Sys-icheck fail for /etc/security/opasswd 16.1.3.1
1120685 3-Major BT1120685 Unable to update the password in the CLI when password-memory is set to > 0 16.1.3.1
1091345-2 3-Major BT1091345 The /root/.bash_history file is not carried forward by default during installations. 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1087621-1 3-Major BT1087621 IKEv2: IPsec CREATE_CHILD_SA (IKE) fails due to bad ECP payload 17.0.0.1, 16.1.3.1, 15.1.6.1
1048137-2 3-Major BT1048137 IPsec IKEv1 intermittent but consistent tunnel setup failures 17.0.0, 16.1.3.1
1042737-4 3-Major BT1042737 BGP sending malformed update missing Tot-attr-len of '0. 17.0.0.1, 16.1.3.1, 15.1.7
1024661-3 3-Major BT1024661 SCTP forwarding flows based on VTAG for bigproto 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1090569-1 4-Minor BT1090569 After enabling a TLS virtual server, TMM crashes with SIGFPE and 1 hour later with SIGSEGV 17.0.0.1, 16.1.3.1, 15.1.6.1
1080317-3 4-Minor BT1080317 Hostname is getting truncated on some logs that are sourced from TMM 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1067105-2 4-Minor BT1067105 Racoon logging shows incorrect SA length. 17.0.0.1, 16.1.3.1, 15.1.7


Local Traffic Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
944381-2 2-Critical BT944381 Dynamic CRL checking for client certificate is not working when TLS1.3 is used. 17.0.0, 16.1.3.1, 15.1.6.1
780857-4 2-Critical BT780857 HA failover network disruption when cluster management IP is not in the list of unicast addresses 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1113549-3 2-Critical BT1113549 System boots into an inoperative state after installing engineering hotfix with FIPS140-2/140-3 License 16.1.3.1
1110205-2 2-Critical BT1110205 SSL::collect in CLIENTSSL_DATA prevents orderly connection shutdown 16.1.3.1
1087469-2 2-Critical BT1087469 iRules are not triggered when an SSL client connects to a BIG-IP system using an empty certificate. 16.1.3.1, 15.1.6.1
1087217-2 2-Critical BT1087217 TMM crash as part of the fix made for ID912209 16.1.3.1
1086677-4 2-Critical BT1086677 TMM Crashes in xvprintf() because of NULL Flow Key 17.0.0, 16.1.3.1, 15.1.7
1080581-1 2-Critical BT1080581 Virtual server creation is not allowed to have TCP, UDP and HTTP together with Client or Server SSL Profiles. 17.0.0, 16.1.3.1, 15.1.5.1
1074517-1 2-Critical BT1074517 Tmm may core while adding/modifying traffic-class attached to a virtual server 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1073609-4 2-Critical BT1073609 Tmm may core while using reject iRule command in LB_SELECTED event. 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1020645 2-Critical BT1020645 When HTTP CONNECT is sent, iRule event HTTP_RESPONSE_RELEASE is not triggered 16.1.3.1, 15.1.4.1
999881-6 3-Major BT999881 Tcl command 'string first' not working if payload contains Unicode characters. 17.0.0, 16.1.3.1, 15.1.7
972517-7 3-Major   Appliance mode hardening 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5
948985-3 3-Major BT948985 Workaround to address Nitrox 3 compression engine hang 17.0.0, 16.1.3.1, 15.1.6.1
922413-8 3-Major BT922413 Excessive memory consumption with ntlmconnpool configured 17.0.0.1, 16.1.3.1, 15.1.7
748886-4 3-Major BT748886 Virtual server stops passing traffic after modification 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1109833-1 3-Major BT1109833 HTTP2 monitors not sending request 16.1.3.1
1091761-1 3-Major BT1091761 Mqtt_message memory leaks when iRules are used 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1082225-4 3-Major BT1082225 Tmm may core while Adding/modifying traffic-class attached to a virtual server. 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1070789 3-Major BT1070789 SSL fwd proxy invalidating certificate even through bundle has valid CA 16.1.3.1
1068445-1 3-Major BT1068445 TCP duplicate acks are observed in speed tests for larger requests 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1060989 3-Major BT1060989 Improper handling of HTTP::collect 16.1.3.1
1053149-1 3-Major BT1053149 A FastL4 TCP connection which is yet to fully establish fails to update its internal SEQ space when a new SYN is received. 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1043805-3 3-Major BT1043805 ICMP traffic over NAT does not work properly. 17.0.0, 16.1.3.1, 15.1.7, 14.1.5.1
1036169-4 3-Major BT1036169 VCMPD rsync server max connection limit: guest "Exit flags for PID 17299: 0x500". 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1022453-4 3-Major BT1022453 IPv6 fragments are dropped when packet filtering is enabled. 17.0.0.1, 16.1.3.1, 15.1.7
1006157-3 3-Major BT1006157 FQDN nodes not repopulated immediately after 'load sys config' 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
987885-6 4-Minor BT987885 Half-open unclean SSL termination might not close the connection properly 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1104073-2 4-Minor BT1104073 Use of iRules command whereis with "isp" or "org" options may cause TCL object leak. 17.0.0.1, 16.1.3.1, 15.1.7


Global Traffic Manager (DNS) Fixes

ID Number Severity Links to More Info Description Fixed Versions
1077701-1 2-Critical BT1077701 GTM "require M from N" monitor rules do not report when the number of "up" responses change 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
984749-1 3-Major BT984749 Discrepancy between DNS cache statistics "Client Summary" and "Client Cache." 17.0.0, 16.1.3.1, 15.1.7
1091249-2 3-Major BT1091249 BIG-IP DNS and Link Controller systems may use an incorrect IPv6 translation address. 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1078669-2 3-Major BT1078669 iRule command “RESOLVER::name_lookup” returns null for TCP resolver with TC (truncated) flag set. 17.0.0, 16.1.3.1, 15.1.7
1071301-1 3-Major BT1071301 GTM server does not get updated even when the virtual server status changes. 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1071233-1 3-Major BT1071233 GTM Pool Members may not be updated accurately when multiple identical database monitors are configured 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
950069-1 4-Minor BT950069 Zonerunner can't edit TXT records containing a + symbol - "Resolver returned no such record" 17.0.0, 16.1.3.1, 15.1.6.1
1084673-2 4-Minor BT1084673 GTM Monitor "require M from N" status change log message does not print pool name 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


Application Security Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1048685-4 2-Critical BT1048685 Rare TMM crash when using Bot Defense Challenge 17.0.0, 16.1.3.1, 15.1.7
1015881-4 2-Critical BT1015881 TMM might crash after configuration failure 16.1.3.1, 15.1.7
886533-5 3-Major BT886533 Icap server connection adjustments 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1083913-2 3-Major BT1083913 Missing error check in ICAP handling 16.1.3.1, 15.1.6.1, 14.1.5.1
1082461-2 3-Major BT1082461 The enforcer cores during a call to 'ASM::raise' from an active iRule 17.0.0.1, 16.1.3.1, 15.1.6.1
1078765-1 3-Major BT1078765 Arcsight remote log with 200004390,200004389 signatures in the request may crash the enforcer. 17.0.0.1, 16.1.3.1, 15.1.7
1062493-1 3-Major BT1062493 BD crash close to it's startup 17.0.0.1, 16.1.3.1, 15.1.7
1056957-1 3-Major BT1056957 An attack signature can be bypassed under some scenarios. 17.0.0.1, 16.1.3.1
1036305-5 3-Major BT1036305 "Mandatory request body is missing" violation in staging but request is unexpectedly blocked 17.0.0, 16.1.3.1, 15.1.6.1
1030133-2 3-Major BT1030133 BD core on XML out of memory 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1014973-5 3-Major BT1014973 ASM changed cookie value. 17.0.0.1, 16.1.3.1, 15.1.7
948241-4 4-Minor BT948241 Count Stateful anomalies based only on Device ID 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
947333-2 4-Minor BT947333 Irrelevant content profile diffs in Policy Diff 17.0.0.1, 16.1.3.1
1079721 4-Minor BT1079721 OWASP 2017 A2 Category - Login enforcement link is broken 16.1.3.1
1073625-2 4-Minor BT1073625 Peer (standby) unit's policies after autosync show a need for Apply Policy when the imported policy has learning enabled. 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1058297-2 4-Minor BT1058297 Policy history values for 'max Size Of Saved Versions' and for 'min Retained Files In Dir' is reset during upgrade 17.0.0.1, 16.1.3.1, 15.1.7
1046317-2 4-Minor BT1046317 Violation details are not populated with staged URLs for some violation types 17.0.0, 16.1.3.1, 15.1.6.1
1040513-5 4-Minor BT1040513 The counter for "FTP commands" is always 0. 17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1
1014573-1 4-Minor BT1014573 Several large arrays/objects in JSON payload may core the enforcer 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1029689-2 5-Cosmetic BT1029689 Incosnsitent username "SYSTEM" in Audit Log 17.0.0.1, 16.1.3.1, 15.1.7


Application Visibility and Reporting Fixes

ID Number Severity Links to More Info Description Fixed Versions
926341-5 3-Major BT926341 RtIntervalSecs parameter in /etc/avr/avrd.cfg file is reset on version upgrade 17.0.0, 16.1.3.1, 15.1.4, 14.1.4.4, 13.1.5


Access Policy Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
987341-1 2-Critical BT987341 BIG-IP OpenID Connect Discovery process does not support strong TLS ciphers. 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5
1071485-3 3-Major BT1071485 For IP based bypass, Response Analytics sends RST. 17.0.0, 16.1.3.1
1063345-5 3-Major BT1063345 Urldbmgrd may crash while downloading the database. 17.0.0, 16.1.3.1
1043217-1 3-Major BT1043217 NTLM frontend auth fails with the latest Microsoft RDP client on MacOS 14.0.1 platform 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1
1039725-1 3-Major BT1039725 Reverse proxy traffic fails when a per-request policy is attached to a virtual server. 17.0.0, 16.1.3.1
1024437-6 3-Major BT1024437 Urldb index building fails to open index temp file 17.0.0, 16.1.3.1
1022493-4 3-Major BT1022493 Slow file descriptor leak in urldbmgrd (sockets open over time) 17.0.0, 16.1.3.1
1010597-1 3-Major BT1010597 Traffic disruption when virtual server is assigned to a non-default route domain 17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


Service Provider Fixes

ID Number Severity Links to More Info Description Fixed Versions
921441-4 3-Major BT921441 MR_INGRESS iRules that change diameter messages corrupt diam_msg 17.0.0, 16.1.3.1, 15.1.7
1103233-2 4-Minor BT1103233 Diameter in-tmm monitor is logging disconnect events unnecessarily 17.0.0.1, 16.1.3.1, 15.1.7


Advanced Firewall Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
977153-3 3-Major BT977153 Packet with routing header IPv6 as next header in IP layer fails to be forwarded 17.0.0.1, 16.1.3.1, 15.1.7


Policy Enforcement Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1091565-1 2-Critical BT1091565 Gy CCR AVP:Requested-Service-Unit is misformatted/NULL 16.1.3.1
1090649-3 3-Major BT1090649 PEM errors when configuring IPv6 flow filter via GUI 17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1
1084993 3-Major BT1084993 [PEM][Gy] e2e ID/h2h ID in RAR / RAA Not Matching 17.0.0.1, 16.1.3.1, 15.1.7
911585-5 4-Minor BT911585 PEM VE does not send CCRi when receiving multiple subscriber requests in a short interval 17.0.0.1, 16.1.3.1, 15.1.7
815901-2 4-Minor BT815901 Add rule to the disabled pem policy is not allowed 17.0.0, 16.1.3.1, 15.1.7


In-tmm monitors Fixes

ID Number Severity Links to More Info Description Fixed Versions
832133-7 3-Major BT832133 In-TMM monitors fail to match certain binary data in the response from the server 17.0.0.1, 16.1.3.1, 15.1.7


SSL Orchestrator Fixes

ID Number Severity Links to More Info Description Fixed Versions
1050273-1 3-Major BT1050273 ERR_BOUNDS errors observed with HTTP explicit proxy service in SSL Orchestrator. 17.0.0, 16.1.3.1, 15.1.5



Cumulative fixes from BIG-IP v16.1.3 that are included in this release


Vulnerability Fixes

ID Number CVE Links to More Info Description Fixed Versions
996233-1 CVE-2022-33947 K38893457, BT996233 Tomcat may crash while processing TMUI requests 17.0.0, 16.1.3, 15.1.6.1, 14.1.5
972489-7 CVE-2022-35243 K11010341, BT972489 BIG-IP Appliance Mode iControl hardening 17.0.0, 16.1.3, 15.1.5.1, 14.1.5
1079505-4 CVE-2022-33203 K52534925, BT1079505 TMM may consume excessive resources while processing SSL Orchestrator traffic 17.0.0, 16.1.3, 15.1.6.1, 14.1.5
1081201-1 CVE-2022-41694 K64829234, BT1081201 MCPD certification import hardening 17.0.0, 16.1.3, 15.1.6.1, 14.1.5


Functional Change Fixes

ID Number Severity Links to More Info Description Fixed Versions
435231 2-Critical K79342815, BT435231 Support RFC7919 Negotiated Finite Field Diffie-Hellman Ephemeral parameters 17.0.0, 16.1.3
1078821-1 2-Critical BT1078821 Upgrade tomcat with OpenJDK 1.7 32bit to OpenJDK 1.8 32bit 17.0.0, 16.1.3, 15.1.6.1, 14.1.5
1036285-1 3-Major BT1036285 Enforce password expiry after local user creation 17.0.0, 16.1.3


TMOS Fixes

ID Number Severity Links to More Info Description Fixed Versions
947905-4 1-Blocking BT947905 Upgrade from 13.1.4, 14.1.4, or 15.1.1 to 14.0.x, 15.0.x, 16.0.0 or 16.0.0.1 fails 16.1.3, 16.0.1
1101705-2 1-Blocking BT1101705 RSA-KEX ciphers list are removed from httpd configuration in FIPS mode since these are non-approved ciphers for FIPS 140-3 certification 17.0.0.1, 16.1.3
1083977-1 1-Blocking BT1083977 MCPD crashes when changing HTTPD configuration, all secondary blades of clustered system remain offline 17.0.0, 16.1.3
943109-4 2-Critical BT943109 Mcpd crash when bulk deleting Bot Defense profiles 17.0.0, 16.1.3, 15.1.6.1, 14.1.5
940225-4 2-Critical BT940225 Not able to add more than 6 NICs on VE running in Azure 17.0.0.1, 16.1.3, 15.1.6.1, 14.1.5.1
1108181-2 2-Critical BT1108181 iControl REST call with token fails with 401 Unauthorized 17.0.0.1, 16.1.3, 15.1.6.1, 14.1.5.1
1079817-1 2-Critical BT1079817 Java null pointer exception when saving UCS with iAppsLX installed 17.0.0, 16.1.3, 15.1.6.1, 14.1.5.1
950149 3-Major BT950149 Add configuration to ccmode for compliance with the Common Criteria STIP PPM. 17.0.0, 16.1.3
896941 3-Major BT896941 Common Criteria ccmode script updated 17.0.0, 16.1.3
886649-5 3-Major BT886649 Connections stall when dynamic BWC policy is changed via GUI and TMSH 17.0.0.1, 16.1.3, 15.1.6.1, 14.1.5.1
724653-5 3-Major BT724653 In a device-group configuration, a non-empty partition can be deleted by a peer device during a config-sync. 17.0.0, 16.1.3, 15.1.6.1, 14.1.5
1106325 3-Major BT1106325 Upgrade from BIG-IP 16.1.3 to BIG-IP 17.0 does not work when FIPS mode is enabled 16.1.3
1089849 3-Major BT1089849 NIST SP800-90B compliance 17.0.0.1, 16.1.3
1064357-1 3-Major BT1064357 execute_post_install: EPSEC: Installation of EPSEC package failed 17.0.0, 16.1.3, 15.1.7
1061481-1 3-Major BT1061481 Denied strings were found in the /var/log/ folder after an update or reboot 17.0.0.1, 16.1.3
1004833 3-Major BT1004833 NIST SP800-90B compliance 17.0.0, 16.1.3, 15.1.4, 14.1.4.2
1100609 4-Minor BT1100609 Length Mismatch in DNS/DHCP IPv6 address in logs and pcap 16.1.3


Local Traffic Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1071689-1 2-Critical BT1071689 SSL connection not immediately closed with HTTP2 connection and lingers until idle timeout 17.0.0, 16.1.3
987077-3 3-Major BT987077 TLS1.3 with client authentication handshake failure 17.0.0, 16.1.3, 15.1.5.1, 14.1.4.6
945357 3-Major BT945357 BIG-IP must be able to set CA=True when creating Certificate Signing Requests from TMSH. 17.0.0, 16.1.3
934697-5 3-Major BT934697 Route domain not reachable (strict mode) 17.0.0, 16.1.3, 15.1.6.1, 14.1.5
1082505 3-Major BT1082505 TLS ciphersuites including RSA-KEX are non-approved ciphers for FIPS 140-3 certification 17.0.0.1, 16.1.3
1063977-3 3-Major BT1063977 Tmsh load sys config merge fails with "basic_string::substr" for non-existing key. 16.1.3
1071269 4-Minor BT1071269 SSL C3D enhancements introduced in BIG-IP version 16.1.3 will not be available in 17.0.0. 16.1.3


Global Traffic Manager (DNS) Fixes

ID Number Severity Links to More Info Description Fixed Versions
1084173-1 3-Major BT1084173 Unable to specify "no caching desired" for ephemeral DNS resolvers (i.e. RESOLV::lookup). 17.0.0, 16.1.3, 15.1.6.1


Application Security Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1070833-2 3-Major BT1070833 False positives on FileUpload parameters due to default signature scanning 16.1.3, 15.1.6.1


Access Policy Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
849029-7 3-Major BT849029 No configurable setting for maximum entries in CRLDP cache 17.0.0, 16.1.3, 15.1.6.1, 14.1.4.4
1097821-2 3-Major BT1097821 Unable to create apm policy customization image using tmsh or VPE in the configuration utility command when source-path is specified 17.0.0.1, 16.1.3, 15.1.6.1, 14.1.5
1053309-1 3-Major BT1053309 Localdbmgr leaks memory while syncing data to sessiondb and mysql. 17.0.0, 16.1.3, 15.1.6.1, 14.1.5


Advanced Firewall Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
945853-4 2-Critical BT945853 Tmm crash when multiple virtual servers are created, modified, or deleted in quick succession 16.1.3, 15.1.3
990461-5 3-Major BT990461 Per virtual server SYN cookie threshold is not preserved or converted during a software upgrade 16.1.3, 15.1.6.1, 14.1.4.4
1079637-1 3-Major BT1079637 Incorrect Neuron rule order 17.0.0, 16.1.3, 15.1.5.1
1012581-1 3-Major BT1012581 Evidence of hardware syncookies triggered but no stats after tcp half-open is triggered 17.0.0, 16.1.3, 15.1.6.1, 14.1.5


iApp Technology Fixes

ID Number Severity Links to More Info Description Fixed Versions
1094177-4 1-Blocking BT1094177 Analytics iApp installation fails 17.0.0, 16.1.3, 15.1.6.1, 14.1.5.1
1023721 3-Major BT1023721 iapp_restricted_key not available on fresh installation and overwrites the peer device's master key during config sync 17.0.0, 16.1.3
1004665 3-Major BT1004665 Secure iAppsLX Restricted Storage issues. 17.0.0, 16.1.3



Cumulative fixes from BIG-IP v16.1.2.2 that are included in this release


Vulnerability Fixes

ID Number CVE Links to More Info Description Fixed Versions
965853-6 CVE-2022-28695 K08510472, BT965853 IM package file hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
964489-7 CVE-2022-28695 K08510472, BT964489 Protocol Inspection IM package hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1051561-7 CVE-2022-1388 K23605346, BT1051561 BIG-IP iControl REST vulnerability CVE-2022-1388 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
993981-3 CVE-2022-28705 K52340447, BT993981 TMM may crash when ePVA is enabled 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
982697-7 CVE-2022-26071 K41440465, BT982697 ICMP hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
951257-5 CVE-2022-26130 K82034427, BT951257 FTP active data channels are not established 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
946325-7 CVE-2022-28716 K25451853, BT946325 PEM subscriber GUI hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
830361-9 CVE-2012-6711 K05122252, BT830361 CVE-2012-6711 Bash Vulnerability 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1087201-6 CVE-2022-0778 K31323265, BT1087201 OpenSSL Vulnerability: CVE-2022-0778 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1078721-1 CVE-2022-27189 K16187341, BT1078721 TMM may consume excessive resources while processing ICAP traffic 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1078053-1 CVE-2022-28701 K99123750, BT1078053 TMM may consume excessive resources while processing STREAM traffic 17.0.0, 16.1.2.2
1071593-4 CVE-2022-32455 K16852653, BT1071593 TMM may crash while processing TLS traffic 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1069629-4 CVE-2022-32455 K16852653, BT1069629 TMM may crash while processing TLS traffic 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5
1067993-4 CVE-2022-28714 K54460845, BT1067993 APM Windows Client installer hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1059185-1 CVE-2022-26415 K81952114, BT1059185 iControl REST Hardening 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1057801-6 CVE-2022-28707 K70300233, BT1057801 TMUI does not follow current best practices 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1056933-3 CVE-2022-26370 K51539421, BT1056933 TMM may crash while processing SIP traffic 17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6
1055737-1 CVE-2022-35236 K79933541, BT1055737 TMM may consume excessive resources while processing HTTP/2 traffic 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1051797 CVE-2018-18281 K36462841, BT1051797 Linux kernel vulnerability: CVE-2018-18281 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1047053-3 CVE-2022-28691 K37155600, BT1047053 TMM may consume excessive resources while processing RTSP traffic 17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6, 13.1.5
1032513-3 CVE-2022-35240 K28405643, BT1032513 TMM may consume excessive resources while processing MRF traffic 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1002565-1 CVE-2021-23840 K24624116, BT1002565 OpenSSL vulnerability CVE-2021-23840 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
992073-2 CVE-2022-27181 K93543114, BT992073 APM NTLM Front End Authentication errors ECA_ERR_INPROGRESS 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
982757-3 CVE-2022-26835 K53197140 APM Access Guided Configuration hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
982341-7 CVE-2022-26835 K53197140, BT982341 iControl REST endpoint hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
915981-4 CVE-2022-26340 K38271531, BT915981 BIG-IP SCP hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
823877-7 CVE-2019-10098
CVE-2020-1927
K25126370, BT823877 CVE-2019-10098 and CVE-2020-1927 apache mod_rewrite vulnerability 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5
1071365-5 CVE-2022-29474 K59904248, BT1071365 iControl SOAP WSDL hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1066729-1 CVE-2022-28708 K85054496, BT1066729 TMM may crash while processing DNS traffic 17.0.0, 16.1.2.2, 15.1.5.1
1057809-6 CVE-2022-27659 K41877405, BT1057809 Saved dashboard hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1047089-2 CVE-2022-29491 K14229426, BT1047089 TMM may terminate while processing TLS/DTLS traffic 17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6
1001937-1 CVE-2022-27634 K57555833, BT1001937 APM configuration hardening 17.0.0, 16.1.2.2, 15.1.5.1
1000021-7 CVE-2022-27182 K31856317, BT1000021 TMM may consume excessive resources while processing packet filters 17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6
713754-3 CVE-2017-15715 K27757011 Apache vulnerability: CVE-2017-15715 16.1.2.2, 15.1.5.1, 14.1.4.5


Functional Change Fixes

ID Number Severity Links to More Info Description Fixed Versions
1050537-1 2-Critical BT1050537 GTM pool member with none monitor will be part of load balancing decisions. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
882709-6 3-Major BT882709 Traffic does not pass on tagged VLANs on VE configured on Hyper-V hypervisors 17.0.0, 16.1.2.2, 15.1.6.1
874941-4 3-Major BT874941 HTTP authentication in the access policy times out after 60 seconds 16.1.2.2, 15.1.6.1, 14.1.5
669046-7 3-Major BT669046 Handling large replies to MCP audit_request messages 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1046669-1 3-Major BT1046669 The audit forwarders may prematurely time out waiting for TACACS responses 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1033837-1 4-Minor K23605346, BT1033837 REST authentication tokens persist on reboot 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


TMOS Fixes

ID Number Severity Links to More Info Description Fixed Versions
1070009 1-Blocking BT1070009 iprepd, icr_eventd and tmipsecd restarts continuously after installing FIPS 140-3 license in BIG-IP cloud platform 17.0.0, 16.1.2.2
976669-5 2-Critical BT976669 FIPS Integrity check fails for other secondary blades after rebooting/replacing secondary blade 17.0.0, 16.1.2.2, 16.1.0, 15.1.5.1, 14.1.4.6
935177-3 2-Critical BT935177 IPsec: Changing MTU or PMTU settings on interface mode tunnel cores tmm 17.0.0, 16.1.2.2, 15.1.6.1
1059165-1 2-Critical BT1059165 Multiple virtual server pages fail to load. 17.0.0, 16.1.2.2
1048141-3 2-Critical BT1048141 Sorting pool members by 'Member' causes 'General database error' 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1047213-1 2-Critical BT1047213 VPN Client to Client communication fails when clients are connected to different TMMs. 17.0.0, 16.1.2.2
1007901-1 2-Critical BT1007901 Support for FIPS 140-3 Module identifier service. 17.0.0, 16.1.2.2
999125-1 3-Major BT999125 After changing management IP addresses, devices can be stuck indefinitely in improper Active/Active or Standby/Standby states. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
992865-3 3-Major BT992865 Virtual server may not enter hardware SYN cookie mode on BIG-IP i11000 and i15000 series appliances 16.1.2.2, 15.1.4
988165-3 3-Major BT988165 VMware CPU reservation is now enforced. 17.0.0, 16.1.2.2, 15.1.5.1
984585-3 3-Major BT984585 IP Reputation option not shown in GUI. 17.0.0, 16.1.2.2, 15.1.5.1
963541-1 3-Major BT963541 Net-snmp5.8 crash 17.0.0, 16.1.2.2, 15.1.5.1
959985-3 3-Major BT959985 Update VMware hardware version templates for BIG-IP Virtual Edition (VE) from v10 to v13 in order to support VMs deployed in more versions of vSphere ESXi. 17.0.0, 16.1.2.2, 15.1.6.1
943669-4 3-Major BT943669 B4450 blade reboot 16.1.2.2, 15.1.2
943577-1 3-Major BT943577 Full sync failure for traffic-matching-criteria with port list under certain conditions 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
912253-2 3-Major BT912253 Non-admin users cannot run show running-config or list sys 17.0.0, 16.1.2.2, 15.1.5.1
907549-6 3-Major BT907549 Memory leak in BWC::Measure 17.0.0, 16.1.2.2, 15.1.0.5, 14.1.5
901669-6 3-Major BT901669 Error status in 'tmsh show cm failover-status', and stale data in some tmstat tables, after management IP address change. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
755976-9 3-Major BT755976 ZebOS might miss kernel routes after mcpd deamon restart 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1083537 3-Major BT1083537 FIPS 140-3 Certification 17.0.0.1, 16.1.2.2
1076377-3 3-Major BT1076377 OSPF path calculation for IA and E routes is incorrect. 17.0.0, 16.1.2.2
1074113-1 3-Major BT1074113 IPsec IKEv2: Selectors incorrectly marked up after disable ike-peer 17.0.0, 16.1.2.2
1071609-2 3-Major BT1071609 IPsec IKEv1: Log Key Exchange payload in racoon.log. 17.0.0, 16.1.2.2, 15.1.6.1
1066285-4 3-Major BT1066285 Master Key decrypt failure - decrypt failure. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1065585-1 3-Major BT1065585 System does not halt on on FIPS/entropy error threshold for BIG-IP Virtual Edition 17.0.0, 16.1.2.2
1064461-4 3-Major BT1064461 PIM-SM will not complete RP registration over tunnel interface when floating IP address is used. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1060625-1 3-Major BT1060625 Wrong INTERNAL_IP6_DNS length. 17.0.0, 16.1.2.2
1060149-2 3-Major BT1060149 BIG-IP vCMP guest data-plane failure with turboflex-adc selected on the host. 17.0.0, 16.1.2.2, 15.1.5.1
1059853 3-Major BT1059853 Long loading configuration time after upgrade from 15.1.3.1 to 16.1.2. 17.0.0, 16.1.2.2
1056993-2 3-Major BT1056993 404 error is raised on GUI when clicking "App IQ." 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1056741-2 3-Major BT1056741 ECDSA certificates signed by RSA CA are not selected based by SNI. 17.0.0, 16.1.2.2, 15.1.5.1
1052893-4 3-Major   Configuration option to delay reboot if dataplane becomes inoperable 16.1.2.2
1048541-1 3-Major BT1048541 Certificate Order Manager: renew requests to the Comodo (now Sectigo) CA are unsuccessful. 17.0.0, 16.1.2.2, 15.1.5.1
1047169-1 3-Major BT1047169 GTM AAAA pool can be deleted from the configuration despite being in use by an iRule. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1042009-1 3-Major BT1042009 Mcpd fails to reply if a request is proxied to another daemon and the connection to that daemon closes 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1022637-1 3-Major BT1022637 A partition other than /Common may fail to save the configuration to disk 17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6, 13.1.5
1020789-4 3-Major BT1020789 Cannot deploy a four-core vCMP guest if the remaining cores are in use. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.6, 13.1.5
1019357-2 3-Major BT1019357 Active fails to resend ipsec ikev2_message_id_sync if no response received 17.0.0, 16.1.2.2, 15.1.6.1
1008837-1 3-Major BT1008837 Control plane is sluggish when mcpd processes a query for virtual server and address statistics 17.0.0, 16.1.2.2, 15.1.4, 14.1.4.4
1008269-1 3-Major BT1008269 Error: out of stack space 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
976337-2 4-Minor BT976337 i40evf Requested 4 queues, but PF only gave us 16. 16.1.2.2, 15.1.5.1
742753-8 4-Minor BT742753 Accessing the BIG-IP system's WebUI via special proxy solutions may fail 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
528894-5 4-Minor BT528894 Config-Sync after non-Common partition config changes results in extraneous config stanzas in the config files of the non-Common partition 17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6, 13.1.5
1072237-1 4-Minor BT1072237 Retrieval of policy action stats causes memory leak 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1067617-4 4-Minor BT1067617 BGP default route not advertised after mid-session OPEN. 17.0.0, 16.1.2.2, 15.1.6.1
1062333-6 4-Minor   Linux kernel vulnerability: CVE-2019-19523 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1061797-1 4-Minor BT1061797 Upgraded AWS CloudFormation Helper Scripts which now support IMDSv2 17.0.0, 16.1.2.2, 15.1.5.1
1058677-2 4-Minor BT1058677 Not all SCTP connections are mirrored on the standby device when auto-init is enabled. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1046693-4 4-Minor BT1046693 TMM with BFD confgured might crash under significant memory pressure 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1045549-4 4-Minor BT1045549 BFD sessions remain DOWN after graceful TMM restart 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1040821-4 4-Minor BT1040821 Enabling an iRule or selecting a pool re-checks the "Address Translation" and "Port Translation" checkboxes 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1034589-1 4-Minor BT1034589 No warning is given when a pool or trunk that was in use by an high availability (HA) Group is deleted from the configuration. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1034329-1 4-Minor BT1034329 SHA-512 checksums for BIG-IP Virtual Edition (VE) images available on downloads.f5.com 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1031425-3 4-Minor BT1031425 Provide a configuration flag to disable BGP peer-id check. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1030645-4 4-Minor BT1030645 BGP session resets during traffic-group failover 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1024621-4 4-Minor BT1024621 Re-establishing BFD session might take longer than expected. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1011217-5 4-Minor BT1011217 TurboFlex Profile setting reverts to turboflex-base after upgrade 17.0.0, 16.1.2.2, 15.1.6.1
1002809-4 4-Minor BT1002809 OSPF vertex-threshold should be at least 100 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


Local Traffic Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
968929-2 2-Critical BT968929 TMM may crash when resetting a connection on an APM virtual server 17.0.0, 16.1.2.2
910213-7 2-Critical BT910213 LB::down iRule command is ineffective, and can lead to inconsistent pool member status 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1071449-4 2-Critical BT1071449 The statsd memory leak on platforms with license disabled processors. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1064617-1 2-Critical BT1064617 DBDaemon process may write to monitor log file indefinitely 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1059053-2 2-Critical BT1059053 Tmm crash when passing traffic over some configurations with L2 virtual wire 17.0.0, 16.1.2.2, 15.1.5.1
1047581-3 2-Critical BT1047581 Ramcache can crash when serving files from the hot cache 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
999901-1 3-Major K68816502, BT999901 Certain LTM policies may not execute correctly after a system reboot or TMM restart. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
993517-1 3-Major BT993517 Loading an upgraded config can result in a file object error in some cases 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
977761 3-Major BT977761 Connections are dropped if a certificate is revoked. 16.1.2.2
967101-1 3-Major BT967101 When all of the interfaces in the trunk are brought up, Gratuitous ARP is not being sent out. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
955617-8 3-Major BT955617 Cannot modify properties of a monitor that is already in use by a pool 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
953601-4 3-Major BT953601 HTTPS monitors marking pool member offline when restrictive ciphers are configured for all TLS protocol versions 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
936441-7 3-Major BT936441 Nitrox5 SDK driver logging messages 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5
912517-7 3-Major BT912517 Database monitor marks pool member down if 'send' is configured but no 'receive' strings are configured 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
902377-4 3-Major BT902377 HTML profile forces re-chunk even though HTML::disable 17.0.0, 16.1.2.2, 15.1.5.1
883049-9 3-Major BT883049 Statsd can deadlock with rrdshim if an rrd file is invalid 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
803109-4 3-Major BT803109 Certain configuration may result in zombie forwarding flows 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
794385-6 3-Major BT794385 BGP sessions may be reset after CMP state change 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5
672963-1 3-Major BT672963 MSSQL monitor fails against databases using non-native charset 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1083989-1 3-Major BT1083989 TMM may restart if abort arrives during MBLB iRule execution 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1073973-1 3-Major BT1073973 Gateway HTTP/2, response payload intermittently not forwarded to client. 17.0.0, 16.1.2.2
1072953-2 3-Major BT1072953 Memory leak in traffic management interface. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1071585-1 3-Major BT1071585 BIG-IP system does not respond to an arp from a SelfIP configured in virtual wire mode 17.0.0, 16.1.2.2
1068561-1 3-Major BT1068561 Can't create key on the second netHSM partition. 17.0.0, 16.1.2.2, 15.1.5.1
1068353-1 3-Major BT1068353 Unexpected event sequence may cause HTTP/2 flow stall during shutdown 16.1.2.2
1064157-1 3-Major BT1064157 Http_proxy_opaque_get should constrain search to local/spawn flows, not looped flows 17.0.0, 16.1.2.2, 15.1.6.1
1063453-1 3-Major BT1063453 FastL4 virtual servers translating between IPv4 and IPv6 may crash on fragmented packets. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1058469-1 3-Major BT1058469 Disabling strict-updates for an iApp service which includes a non-default NTLM profile will cause virtual servers using that profile to stop working. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1056401-4 3-Major BT1056401 Valid clients connecting under active syncookie mode might experience latency. 17.0.0, 16.1.2.2, 15.1.5.1
1055097-1 3-Major BT1055097 TCP proxy with ramcache and OneConnect can result in out-of-order events, which stalls the flow. 17.0.0, 16.1.2.2
1052929-4 3-Major BT1052929 MCPD logs "An internal login failure is being experienced on the FIPS card" when FIPS HSM is uninitialized. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1043357-4 3-Major BT1043357 SSL handshake may fail when using remote crypto client 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1043017-4 3-Major BT1043017 Virtual-wire with standard-virtual fragmentation 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.6
1042913-2 3-Major BT1042913 Pkcs11d CPU utilization jumps to 100% 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1042509-1 3-Major BT1042509 On an HTTP2 gateway virtual server, TMM does not ever update the stream's window for a large POST request 17.0.0, 16.1.2.2
1029897-1 3-Major K63312282, BT1029897 Malformed HTTP2 requests can be passed to HTTP/1.1 server-side pool members. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1024841-2 3-Major BT1024841 SSL connection mirroring with ocsp connection failure on standby 17.0.0, 16.1.2.2, 15.1.5.1
1024225-3 3-Major BT1024225 BIG-IP sends "Transfer-Encoding: chunked" to http/2 client after HEAD request 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1020549-1 3-Major BT1020549 Server-side connections stall with zero window with OneConnect profile 17.0.0, 16.1.2.2
1017721-5 3-Major BT1017721 WebSocket does not close cleanly when SSL enabled. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5.1
1017533-3 3-Major BT1017533 Using TMC might cause virtual server vlans-enabled configuration to be ignored 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.6
1016449-3 3-Major BT1016449 After certain configuration tasks are performed, TMM may run with stale Self IP parameters. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1008501-1 3-Major BT1008501 TMM core 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1008009-3 3-Major BT1008009 SSL mirroring null hs during session sync state 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5
1006781-2 3-Major BT1006781 Server SYN is sent on VLAN 0 when destination MAC is multicast 17.0.0, 16.1.2.2, 15.1.4.1
1004897-5 3-Major BT1004897 'Decompression' is logged instead of 'Max Headers Exceeded' GoAway reason 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.4
1004689-4 3-Major BT1004689 TMM might crash when pool routes with recursive nexthops and reselect option are used. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
838305-9 4-Minor BT838305 BIG-IP may create multiple connections for packets that should belong to a single flow. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
717806-8 4-Minor BT717806 In the case of 'n' bigd instances, uneven CPU load distribution is seen when a high number of monitors are configured 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1080341-4 4-Minor BT1080341 Changing an L2-forward virtual to any other virtual type might not update the configuration. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1075205-1 4-Minor BT1075205 Using TCP::close after HTTP::redirect/HTTP::respond causes HTTP response not to be delivered to the client. 17.0.0, 16.1.2.2
1064669-1 4-Minor BT1064669 Using HTTP::enable iRule command in RULE_INIT event might cause TMM to crash. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5
1026605-6 4-Minor BT1026605 When bigd.mgmtroutecheck is enabled monitor probes may be denied for non-mgmt routes 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1026005-1 4-Minor BT1026005 BIG-IP Virtual Edition (VE) does NOT preserve the order of NICs 5-10 defined in the VMware ESXi hypervisor and NSXT platforms. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5
1016441-4 4-Minor   RFC Enforcement Hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1016049-6 4-Minor BT1016049 EDNS query with CSUBNET dropped by protocol inspection 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
968581-4 5-Cosmetic BT968581 TMSH option max-response for "show /ltm profile ramcache" command may not comply with its description 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5


Global Traffic Manager (DNS) Fixes

ID Number Severity Links to More Info Description Fixed Versions
1062513-4 2-Critical BT1062513 GUI returns 'no access' error message when modifying a GTM pool property. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1030881-1 2-Critical BT1030881 [GTM] Upgrade failure - 01070022:3: The monitor template min was not found. 17.0.0, 16.1.2.2
1027657-4 2-Critical BT1027657 Monitor scheduling is sometimes inconsistent for "require M from N" monitor rules. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5
1011433-1 2-Critical BT1011433 TMM may crash under memory pressure when performing DNS resolution 17.0.0, 16.1.2.2, 15.1.6.1
1010617-1 2-Critical BT1010617 String operation against DNS resource records cause tmm memory corruption 17.0.0, 16.1.2.2, 15.1.5.1
876677-2 3-Major BT876677 When running the debug version of TMM, an assertion may be triggered due to an expired DNS lookup. 17.0.0, 16.1.2.2, 15.1.6.1
1076401-5 3-Major BT1076401 Memory leak in TMM (ldns) when exceeding dnssec.maxnsec3persec. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1064189-1 3-Major BT1064189 DoH proxy and server listeners from GUI with client-ssl profile and server-ssl profile set to None produces undefined warning 17.0.0, 16.1.2.2
1046785-1 3-Major BT1046785 Missing GTM probes when max synchronous probes are exceeded. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5, 13.1.5
1044425-1 3-Major K85021277, BT1044425 NSEC3 record improvements for NXDOMAIN 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1020337-2 3-Major BT1020337 DNS msg_ObjType can cause buffer overrun due to lack of NUL terminator 17.0.0, 16.1.2.2, 15.1.5.1
1018613-1 3-Major BT1018613 Modify wideip pools with replace-all-with results pools with same order 0 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


Application Security Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1079909-1 2-Critical K82724554, BT1079909 The bd generates a core file 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.6, 13.1.5
1069501-1 2-Critical K22251611, BT1069501 ASM may not match certain signatures 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1069449-1 2-Critical K39002226, BT1069449 ASM attack signatures may not match cookies as expected 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1068237-1 2-Critical BT1068237 Some attack signatures added to policies are not used. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1000789-1 2-Critical BT1000789 ASM-related iRule keywords may not work as expected 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
965785-4 3-Major BT965785 Active/Standby sync process fails to populate table DCC.HSL_DATA_PROFILES on standby machine 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
961509-5 3-Major BT961509 ASM blocks WebSocket frames with signature matched but Transparent policy 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
926845-7 3-Major BT926845 Inactive ASM policies are deleted upon upgrade 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
923221-8 3-Major BT923221 BD does not use all the CPU cores 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
818889-1 3-Major BT818889 False positive malformed json or xml violation. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1077281-2 3-Major BT1077281 Import xml policy fails with “Malformed xml” error when session awareness configuration contains login pages 16.1.2.2, 15.1.6.1
1072197-1 3-Major K94142349, BT1072197 Issue with input normalization in WebSocket. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1070273-1 3-Major BT1070273 OWASP Dashboard does not calculate Disallow DTDs in XML content profile protection properly. 17.0.0, 16.1.2.2, 15.1.6.1
1069133-4 3-Major BT1069133 ASMConfig memory leak 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1067285-1 3-Major BT1067285 Re-branding - Change 'F5 Networks, Inc.' to 'F5, Inc.' 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1066829-1 3-Major BT1066829 Memory leak for xml/json auto-detected parameter with signature patterns. 17.0.0, 16.1.2.2, 15.1.5.1
1061617-4 3-Major BT1061617 Some of the URL Attack signatures are not detected in the URL if "Handle Path Parameters" is configured "As Parameters". 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1060933-1 3-Major K49237345 Issue with input normalization. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1059621-2 3-Major BT1059621 IP Exceptions feature and SSRF feature do not work as expected if both the entries are configured with the same IP/IPs. 17.0.0, 16.1.2.2
1056365-1 3-Major BT1056365 Bot Defense injection does not follow best SOP practice. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1052173-1 3-Major BT1052173 For wildcard SSRF hosts "Matched Disallowed Address" field is wrong in the SSRF violation. 17.0.0, 16.1.2.2
1052169 3-Major BT1052169 Traffic is blocked on detection of an SSRF violation even though the URI parameter is in staging mode 16.1.2.2
1051213-1 3-Major BT1051213 Increase default value for violation 'Check maximum number of headers'. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1051209-1 3-Major K53593534, BT1051209 BD may not process certain HTTP payloads as expected 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1047389-4 3-Major BT1047389 Bot Defense challenge hardening 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1043533-3 3-Major BT1043533 Unable to pick up the properties of the parameters from audit reports. 17.0.0, 16.1.2.2, 15.1.5.1
1043385-4 3-Major BT1043385 No Signature detected If Authorization header is missing padding. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1042605-1 3-Major BT1042605 ASM Critical Warnings during UCS load after upgrade to v15.1.0 or above 17.0.0, 16.1.2.2, 15.1.5.1
1041149-1 3-Major BT1041149 Staging of URL does not affect apply value signatures 17.0.0, 16.1.2.2, 15.1.5.1
1038733-4 3-Major BT1038733 Attack signature not detected for unsupported authorization types. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1037457-1 3-Major BT1037457 High CPU during specific dos mitigation 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1033017-1 3-Major BT1033017 Policy changes learning mode to automatic after upload and sync 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1030853-1 3-Major BT1030853 Route domain IP exception is being treated as trusted (for learning) after being deleted 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1028473-1 3-Major BT1028473 URL sent with trailing slash might not be matched in ASM policy 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1023993-4 3-Major BT1023993 Brute Force is not blocking requests, even when auth failure happens multiple times 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1021521-1 3-Major BT1021521 JSON Schema is not enforced if OpenAPI media-type is wild card. 17.0.0, 16.1.2.2
1019721-1 3-Major BT1019721 Wrong representation of JSON/XML validation files in template based (minimal) JSON policy export 17.0.0, 16.1.2.2
1012221-1 3-Major BT1012221 Message: childInheritanceStatus is not compatible with parentInheritanceStatus 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1011069-1 3-Major BT1011069 Group/User R/W permissions should be changed for .pid and .cfg files. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1008849-4 3-Major BT1008849 OWASP "A4 XML External Entities (XXE)" is not reflecting the XXE signatures configuration. 17.0.0, 16.1.2.2, 15.1.5.1
844045-4 4-Minor BT844045 ASM Response event logging for "Illegal response" violations. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1066377-1 4-Minor BT1066377 OpenAPI - Content profile is not consistent with wildcard configuration 17.0.0, 16.1.2.2
1050697-4 4-Minor BT1050697 Traffic learning page counts Disabled signatures when they are ready to be enforced 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1048445-1 4-Minor BT1048445 Accept Request button is clickable for unlearnable violation illegal host name 16.1.2.2, 15.1.6.1
1039245-2 4-Minor BT1039245 Policy Properties screen does not load and display 17.0.0, 16.1.2.2
1038741-4 4-Minor BT1038741 NTLM type-1 message triggers "Unparsable request content" violation. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1036521-1 4-Minor BT1036521 TMM crash in certain cases 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1035361-4 4-Minor BT1035361 Illegal cross-origin after successful CAPTCHA 16.1.2.2, 15.1.5.1, 14.1.5
1034941-1 4-Minor BT1034941 Exporting and then re-importing "some" XML policy does not load the XML content-profile properly 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1021637-4 4-Minor BT1021637 In some cases BD enforces CSRF on all URLs, ignoring CSRF URLs 16.1.2.2, 15.1.6.1
1020717-4 4-Minor BT1020717 Policy versions cleanup process sometimes removes newer versions 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


Application Visibility and Reporting Fixes

ID Number Severity Links to More Info Description Fixed Versions
1038913-4 3-Major BT1038913 The weekly ASM reporting "Security ›› Reporting : Application : Charts" filter "View By" as IP Intelligence shows only the "Safe" category 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


Access Policy Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
858005-1 3-Major BT858005 When APM VPE “IP Subnet Match” agent configured with leading/trailing spaces runtime evaluation results in failure with error in /var/log/apm "Rule evaluation failed with error:" 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
423519-5 3-Major K74302282, BT423519 Bypass disabling the redirection controls configuration of APM RDP Resource. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1045229-1 3-Major BT1045229 APMD leaks Tcl_Objs as part of the fix made for ID 1002557 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5
1044121-3 3-Major BT1044121 APM logon page is not rendered if db variable "ipv6.enabled" is set to false 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5


Service Provider Fixes

ID Number Severity Links to More Info Description Fixed Versions
1029397-4 2-Critical BT1029397 Tmm may crash with SIP-ALG deployment in a particular race condition 17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6
957905-1 3-Major BT957905 SIP Requests / Responses over TCP without content_length header are not aborted by BIG-IP. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
1082885-1 3-Major BT1082885 MR::message route virtual asserts when configuration changes during ongoing traffic 17.0.0, 16.1.2.2, 15.1.6, 14.1.5


Advanced Firewall Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
964625-5 3-Major BT964625 Improper processing of firewall-rule metadata 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
959609-4 3-Major BT959609 Autodiscd daemon keeps crashing 17.0.0, 16.1.2.2, 15.1.6.1
929909-3 3-Major BT929909 TCP Packets are not dropped in IP Intelligence 17.0.0, 16.1.2.2, 15.1.5.1
1008265-1 3-Major K92306170, BT1008265 DoS Flood and Sweep vector states are disabled on an upgrade to BIG-IP software versions 14.x and beyond 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1072057-1 4-Minor BT1072057 "ANY" appears despite setting an IP address or host as the source in Security->Network Firewall->Policy. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


Policy Enforcement Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1086897-1 2-Critical BT1086897 PEM subcriber lookup can fail for internet side/subscriber side new connections 17.0.0, 16.1.2.2


Carrier-Grade NAT Fixes

ID Number Severity Links to More Info Description Fixed Versions
1028269-2 2-Critical BT1028269 Device using CGNAT + subscriber discovery license shows unknown for pem_subscriber-id. 17.0.0, 16.1.2.2, 15.1.5.1
1019613-5 2-Critical BT1019613 Unknown subscriber in PBA deployment may cause CPU spike 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6
1064217-1 3-Major BT1064217 Port bit not set correctly in the ipv6 destination address with 1:8 mapping for CGNAT MAP-T. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


Fraud Protection Services Fixes

ID Number Severity Links to More Info Description Fixed Versions
1038445-1 2-Critical BT1038445 During upgrade to 16.1, the previous FPS Engine live update remains active 17.0.0, 16.1.2.2
873617-1 3-Major BT873617 DataSafe is not available with AWAF license after BIG-IP startup or MCP restart. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


Anomaly Detection Services Fixes

ID Number Severity Links to More Info Description Fixed Versions
1071181-2 3-Major BT1071181 Improving Signature Detection Accuracy 16.1.2.2, 15.1.6.1, 14.1.5
1060409-2 4-Minor BT1060409 Behavioral DoS enable checkbox is wrong. 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


Traffic Classification Engine Fixes

ID Number Severity Links to More Info Description Fixed Versions
1033829-3 2-Critical BT1033829 Unable to load Traffic Classification package 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5
1052153-2 3-Major BT1052153 Signature downloads for traffic classification updates via proxy fail 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


Protocol Inspection Fixes

ID Number Severity Links to More Info Description Fixed Versions
1072733-4 2-Critical   Protocol Inspection IM package hardening 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
1070677-1 3-Major BT1070677 Learning phase does not take traffic into account - dropping all. 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5
940261-1 4-Minor BT940261 Support IPS package downloads via HTTP proxy. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


In-tmm monitors Fixes

ID Number Severity Links to More Info Description Fixed Versions
944121-4 3-Major BT944121 Missing SNI information when using non-default domain https monitor running in TMM mode. 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5
854129-6 3-Major BT854129 SSL monitor continues to send previously configured server SSL configuration after removal 17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


SSL Orchestrator Fixes

ID Number Severity Links to More Info Description Fixed Versions
1050969-1 1-Blocking BT1050969 After running clear-rest-storage you are logged out of the UI with a message - Your login credentials no longer valid 17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5
969297 3-Major BT969297 Virtual IP configured on a system with SelfIP on vwire becomes unresponsive 16.1.2.2
1058401-1 3-Major BT1058401 SSL Bypass does not work for inbound traffic 17.0.0, 16.1.2.2
1048033-1 3-Major BT1048033 Server-speaks-first traffic might not work with SSL Orchestrator 17.0.0, 16.1.2.2
1047377-1 3-Major BT1047377 "Server-speak-first" traffic might not work with SSL Orchestrator 17.0.0, 16.1.2.2
1029869-1 3-Major BT1029869 Use of ha-sync script may cause gossip communications to fail 17.0.0, 16.1.2.2, 15.1.6.1
1029585-1 3-Major BT1029585 Use of ha-sync script may cause platforms in a sync-failover device group to fall out of sync 17.0.0, 16.1.2.2, 15.1.6.1



Cumulative fixes from BIG-IP v16.1.2.1 that are included in this release


Vulnerability Fixes

ID Number CVE Links to More Info Description Fixed Versions
1045101-4 CVE-2022-26890 K03442392, BT1045101 Bd may crash while processing ASM traffic 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.6, 13.1.5
940185-7 CVE-2022-23023 K11742742, BT940185 icrd_child may consume excessive resources while processing REST requests 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5
1063389-6 CVE-2015-5191 K84583382, BT1063389 open-vm-tools vulnerability: CVE-2015-5191 17.0.0, 16.1.2.1, 14.1.5


Functional Change Fixes

ID Number Severity Links to More Info Description Fixed Versions
1015133-5 3-Major BT1015133 Tail loss can cause TCP TLP to retransmit slowly. 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


TMOS Fixes

ID Number Severity Links to More Info Description Fixed Versions
749332-1 2-Critical BT749332 Client-SSL Object's description can be updated using CLI and with REST PATCH operation 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.4
996001-5 3-Major BT996001 AVR Inspection Dashboard 'Last Month' does not show all data points 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5
994305-3 3-Major BT994305 The version of open-vm-tools included with BIG-IP Virtual Edition is 10.1.5 17.0.0, 16.1.2.1, 15.1.5.1
968657-1 3-Major BT968657 Added support for IMDSv2 on AWS 17.0.0, 16.1.2.1, 15.1.5.1
1032949-1 3-Major BT1032949 Dynamic CRL configured with client authentication profile as "Request" causes connection termination without certificate. 17.0.0, 16.1.2.1, 15.1.5
1041765-2 4-Minor BT1041765 Racoon may crash in rare cases 17.0.0, 16.1.2.1


Local Traffic Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
999097-1 3-Major BT999097 SSL::profile may select profile with outdated configuration 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5
910673-6 3-Major BT910673 Nethsm-thales-install.sh installation fails with error 'Could not reach Thales HSM' 17.0.0, 16.1.2.1, 15.1.5.1
898929-6 3-Major BT898929 Tmm might crash when ASM, AVR, and pool connection queuing are in use 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5
1065789-1 3-Major   TMM may send duplicated alerts while processing SSL connections 17.0.0, 16.1.2.1, 15.1.5
1038629-4 3-Major BT1038629 DTLS virtual server not performing clean shutdown upon reception of CLOSE_NOTIFY from client 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5
1031609-1 3-Major BT1031609 Improve nethsm-thales-install.sh and nethsm-thales-rfs-install.sh to be compatible with Entrust Client v12.60.10 package. 17.0.0, 16.1.2.1, 15.1.5.1
1019609-1 3-Major BT1019609 No Error logging when BIG-IP device's IP address is not added in client list on netHSM. 17.0.0, 16.1.2.1, 15.1.5.1
1017513-5 3-Major BT1017513 Config sync fails with error Invalid monitor rule instance identifier or monitors are in a bad state such as checking 17.0.0, 16.1.2.1, 15.1.5.1, 14.1.4.5, 13.1.5
1007749-2 3-Major BT1007749 URI TCL parse functions fail when there are interior segments with periods and semi-colons 17.0.0, 16.1.2.1, 15.1.5
1048433-1 4-Minor BT1048433 Improve Extract logic of thales-sync.sh to support VIPRION cluster to support 12.6.10 client installation. 16.1.2.1, 15.1.5.1
1024761-1 4-Minor BT1024761 HTTP adds Transfer-Encoding and terminating chunk to responses that cannot have a body 17.0.0, 16.1.2.1, 15.1.5
1005109-4 4-Minor BT1005109 TMM crashes when changing traffic-group on IPv6 link-local address 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


Global Traffic Manager (DNS) Fixes

ID Number Severity Links to More Info Description Fixed Versions
935249-3 3-Major BT935249 GTM virtual servers have the wrong status 17.0.0, 16.1.2.1, 15.1.5
1039553-1 3-Major BT1039553 Non-200 HTTP status codes fail to be matched by GTM HTTP(S) monitors 17.0.0, 16.1.2.1, 15.1.5
1021061-4 3-Major BT1021061 Config fails to load for large config on platform with Platform FIPS license enabled 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


Application Security Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
993613-7 2-Critical BT993613 Device fails to request full sync 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5
984593-1 3-Major BT984593 BD crash 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5
921697-1 3-Major BT921697 Attack signature updates fail to install with Installation Error. 17.0.0, 16.1.2.1, 15.1.5.1, 14.1.4.6
907025-5 3-Major BT907025 Live update error" 'Try to reload page' 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5
885765-1 3-Major BT885765 ASMConfig Handler undergoes frequent restarts 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5
830341-5 3-Major BT830341 False positives Mismatched message key on ASM TS cookie 17.0.0, 16.1.2.1, 16.0.1.2, 15.1.4, 14.1.4.2, 13.1.4.1
1043205-1 3-Major BT1043205 SSRF Violation should be shown as a Parameter Entity Reference. 16.1.2.1
1042069-1 3-Major   Some signatures are not matched under specific conditions. 17.0.0, 16.1.2.1, 15.1.4.1, 14.1.4.5, 13.1.5
1002385-1 4-Minor K67397230, BT1002385 Fixing issue with input normalization 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.6


Application Visibility and Reporting Fixes

ID Number Severity Links to More Info Description Fixed Versions
1009093-2 2-Critical BT1009093 GUI widgets pages are not functioning correctly 17.0.0, 16.1.2.1, 15.1.5


Access Policy Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
969317-4 3-Major BT969317 "Restrict to Single Client IP" option is ignored for vmware VDI 17.0.0, 16.1.2.1, 15.1.4.1, 14.1.4.5
828761-5 3-Major BT828761 APM OAuth - Auth Server attached iRule works inconsistently 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5
827393-5 3-Major BT827393 In rare cases tmm crash is observed when using APM as RDG proxy. 17.0.0, 16.1.2.1, 15.1.5.1, 14.1.4.5, 13.1.5
738593-3 3-Major BT738593 Vmware Horizon session collaboration (shadow session) feature does not work through APM. 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5
1007677-2 3-Major BT1007677 Artifact resolution on SAML IdP fails with error 'SAML SSO: Cannot find SP connector' 17.0.0, 16.1.2.1, 15.1.4.1


Service Provider Fixes

ID Number Severity Links to More Info Description Fixed Versions
1039329-2 3-Major BT1039329 MRF per peer mode is not working in vCMP guest. 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5
1025529-2 3-Major BT1025529 TMM generates core when iRule executes a nexthop command and SIP traffic is sent 17.0.0, 16.1.2.1, 15.1.4.1, 14.1.4.5


Policy Enforcement Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
956013-4 3-Major BT956013 System reports{{validation_errors}} 16.1.2.1, 15.1.5, 14.1.4.5


Anomaly Detection Services Fixes

ID Number Severity Links to More Info Description Fixed Versions
1023437-1 3-Major   Buffer overflow during attack with large HTTP Headers 17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


SSL Orchestrator Fixes

ID Number Severity Links to More Info Description Fixed Versions
1055361-1 2-Critical BT1055361 Suspending iRule command in L7CHECK_CLIENT_DATA can lead to a tmm crash. 17.0.0, 16.1.2.1, 15.1.5.1



Cumulative fixes from BIG-IP v16.1.2 that are included in this release


Vulnerability Fixes

ID Number CVE Links to More Info Description Fixed Versions
991421-2 CVE-2022-23016 K91013510, BT991421 TMM may crash while processing TLS traffic 17.0.0, 16.1.2, 15.1.4.1
989701-8 CVE-2020-25212 K42355373, BT989701 CVE-2020-25212 Kernel: A flaw was found in the NFSv4 implementation where when mounting a remote attacker controlled server it could return specially crafted response 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
988549-10 CVE-2020-29573 K27238230, BT988549 CVE-2020-29573: glibc vulnerability 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
968893-3 CVE-2022-23014 K93526903, BT968893 TMM crash when processing APM traffic 17.0.0, 16.1.2, 15.1.4.1
940317-9 CVE-2020-13692 K23157312, BT940317 CVE-2020-13692: PostgreSQL JDBC Driver vulnerability 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4, 13.1.5
1037181-1 CVE-2022-23022 K96924184, BT1037181 TMM may crash while processing HTTP traffic 17.0.0, 16.1.2
1032405-1 CVE-2021-23037 K21435974, BT1032405 TMUI XSS vulnerability CVE-2021-23037 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1031269 CVE-2022-23020 K17514331, BT1031269 TMM may consume excessive resources when processing logging profiles 17.0.0, 16.1.2
1030689-1 CVE-2022-23019 K82793463, BT1030689 TMM may consume excessive resources while processing Diameter traffic 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4, 13.1.5
1029629-1 CVE-2022-28706 K03755971, BT1029629 TMM may crash while processing DNS lookups 17.0.0, 16.1.2, 15.1.5.1
1028669-7 CVE-2019-9948 K28622040, BT1028669 Python vulnerability: CVE-2019-9948 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1028573-6 CVE-2020-10878 K40508224, BT1028573 Perl vulnerability: CVE-2020-10878 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1028497-7 CVE-2019-15903 K05295469, BT1028497 libexpat vulnerability: CVE-2019-15903 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1021713-1 CVE-2022-41806 K00721320, BT1021713 TMM may crash when processing AFM NAT64 policy 17.0.0, 16.1.2, 15.1.5.1
1012365-4 CVE-2021-20305 K33101555, BT1012365 Nettle cryptography library vulnerability CVE-2021-20305 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1007489-7 CVE-2022-23018 K24358905, BT1007489 TMM may crash while handling specific HTTP requests 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
974341-6 CVE-2022-23026 K08402414, BT974341 REST API: File upload 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
973409-6 CVE-2020-1971 K42910051, BT973409 CVE-2020-1971 - openssl: EDIPARTYNAME NULL pointer de-reference 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4
941649-8 CVE-2021-23043 K63163637, BT941649 Local File Inclusion Vulnerability 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
803965-10 CVE-2018-20843 K51011533, BT803965 Expat Vulnerability: CVE-2018-20843 17.0.0, 16.1.2, 15.1.4, 14.1.4.5, 13.1.5
1035729-1 CVE-2022-23021 K57111075, BT1035729 TMM may crash while processing traffic http traffic 17.0.0, 16.1.2
1009725-1 CVE-2022-23030 K53442005, BT1009725 Excessive resource usage when ixlv drivers are enabled 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


Functional Change Fixes

ID Number Severity Links to More Info Description Fixed Versions
985953-6 4-Minor BT985953 GRE Transparent Ethernet Bridging inner MAC overwrite 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


TMOS Fixes

ID Number Severity Links to More Info Description Fixed Versions
1039049-2 1-Blocking BT1039049 Installing EHF on particular platforms fails with error "RPM transaction failure" 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
997313-2 2-Critical BT997313 Unable to create APM policies in a sync-only folder 17.0.0, 16.1.2, 15.1.4.1
1031357-2 2-Critical BT1031357 After reboot of standby and terminating peer, some IPsec traffic-selectors are still online 17.0.0, 16.1.2
1029949-2 2-Critical BT1029949 IPsec traffic selector state may show incorrect state on high availability (HA) standby device 17.0.0, 16.1.2
998221-1 3-Major BT998221 Accessing pool members from configuration utility is slow with large config 17.0.0, 16.1.2, 16.0.1.2, 15.1.4, 14.1.4.3
946185-3 3-Major BT946185 Unable to view iApp component due to error 'An error has occurred while trying to process your request.' 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4
922185-3 3-Major BT922185 LDAP referrals not supported for 'cert-ldap system-auth' 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
881085-4 3-Major BT881085 Intermittent auth failures with remote LDAP auth for BIG-IP managment 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
708991-1 3-Major BT708991 Newly entered password is not remembered. 17.0.0, 16.1.2
1045421-1 3-Major K16107301, BT1045421 No Access error when performing various actions in the TMOS GUI 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1032737-2 3-Major BT1032737 IPsec: tmm SIGSEGV in getlocaladdr in ikev2_initiate 17.0.0, 16.1.2, 15.1.4.1
1032077-1 3-Major BT1032077 TACACS authentication fails with tac_author_read: short author body 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1028969-1 3-Major BT1028969 An unused traffic-selector can prevent an IKEv2 IPsec tunnel from working 17.0.0, 16.1.2
1026549-1 3-Major BT1026549 Incorrect BIG-IP Virtual Edition interface state changes may be communicated to mcpd 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1022757-2 3-Major BT1022757 Tmm core due to corrupt list of ike-sa instances for a connection 17.0.0, 16.1.2
1021773-1 3-Major BT1021773 Mcpd core. 17.0.0, 16.1.2, 15.1.7
1020377-1 3-Major BT1020377 Missing IKEv2 listeners can send IKE packets to the IKEv1 racoon daemon 17.0.0, 16.1.2
1015645-2 3-Major BT1015645 IPSec SA's missing after reboot 17.0.0, 16.1.2
1009949-4 3-Major BT1009949 High CPU usage when upgrading from previous version 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4
1003257-6 3-Major BT1003257 ZebOS 'set ipv6 next-hop' and 'set ipv6 next-hop local' do not work as expected 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
921365-2 4-Minor BT921365 IKE-SA on standby deleted due to re-transmit failure when failing over from active to standby 17.0.0, 16.1.2, 15.1.4
1034617-1 4-Minor BT1034617 Login/Security Banner text not showing in console login. 17.0.0, 16.1.2
1030845-1 4-Minor BT1030845 Time change from TMSH not logged in /var/log/audit. 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1022417-1 4-Minor BT1022417 Ike stops with error ikev2_send_request: [WINDOW] full window 17.0.0, 16.1.2


Local Traffic Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1039041 1-Blocking BT1039041 Log Message: Clock advanced by <number> ticks 17.0.0, 16.1.2
1040361-1 2-Critical BT1040361 TMM crashes during its startup when TMC destination port list attached/deleted to virtual server. 17.0.0, 16.1.2, 15.1.5, 14.1.4.5
915773-7 3-Major BT915773 Restart of TMM after stale interface reference 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4
1023365-2 3-Major BT1023365 SSL server response could be dropped on immediate client shutdown. 17.0.0, 16.1.2, 15.1.4.1
1021481-1 3-Major BT1021481 'http-tunnel' and 'socks-tunnel' (which are internal interfaces) should be hidden. 17.0.0, 16.1.2
1020957-1 3-Major BT1020957 HTTP response may be truncated by the BIG-IP system 17.0.0, 16.1.2
1018577-4 3-Major BT1018577 SASP monitor does not mark pool member with same IP Address but different Port from another pool member 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1016113-1 3-Major BT1016113 HTTP response-chunking 'sustain' profile option may not rechunk responses when also using a web acceleration profile. 17.0.0, 16.1.2, 15.1.4
1008017-2 3-Major BT1008017 Validation failure on Enforce TLS Requirements and TLS Renegotiation 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
895557-5 4-Minor BT895557 NTLM profile logs error when used with profiles that do redirect 17.0.0, 16.1.2, 16.0.1.2, 15.1.4, 14.1.4.2
1031901-2 4-Minor BT1031901 In HTTP2 deployment, RST_STREAM sent to client if server in CLOSING state is picked 17.0.0, 16.1.2, 15.1.4.1
1018493-1 4-Minor BT1018493 Response code 304 from TMM Cache always closes TCP connection. 17.0.0, 16.1.2, 15.1.4, 14.1.4.5, 13.1.5
1002945-4 4-Minor BT1002945 Some connections are dropped on chained IPv6 to IPv4 virtual servers. 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


Global Traffic Manager (DNS) Fixes

ID Number Severity Links to More Info Description Fixed Versions
1035853-1 2-Critical K41415626, BT1035853 Transparent DNS Cache can consume excessive resources. 17.0.0, 16.1.2, 15.1.5, 14.1.4.5, 13.1.5
1028773-1 2-Critical BT1028773 Support for DNS Over TLS 17.0.0, 16.1.2
1009037-1 2-Critical BT1009037 Tcl resume on invalid connection flow can cause tmm crash 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1021417-1 3-Major BT1021417 Modifying GTM pool members with replace-all-with results in pool members with order 0 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


Application Security Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
912149-7 2-Critical BT912149 ASM sync failure with Cgc::Channel error 'Failed to send a message, error:15638476' 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1019853-1 2-Critical K30911244, BT1019853 Some signatures are not matched under specific conditions 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1017153-4 2-Critical BT1017153 Asmlogd suddenly deletes all request log protobuf files and records from the database. 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1011065-1 2-Critical K39002226, BT1011065 Certain attack signatures may not match in multipart content 17.0.0, 16.1.2, 15.1.4.1
1011061-4 2-Critical K39002226, BT1011061 Certain attack signatures may not match in multipart content 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
947341-4 3-Major BT947341 MySQL generates multiple error 24 (too many files open) for PRX.REQUEST_LOG DB tables files. 17.0.0, 16.1.2, 16.0.1.2, 15.1.3, 14.1.4.1
932133-1 3-Major BT932133 Payloads with large number of elements in XML take a lot of time to process 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4, 13.1.5
842013-1 3-Major BT842013 ASM Configuration is Lost on License Reactivation 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1042917-1 3-Major BT1042917 Using 'Full Export' of security policy should result with no diffs after importing it back to device. 17.0.0, 16.1.2
1028109-1 3-Major BT1028109 Detected attack signature is reported with the wrong context. 17.0.0, 16.1.2
1022269-1 3-Major BT1022269 False positive RFC compliant violation 17.0.0, 16.1.2, 15.1.4, 14.1.4.4, 13.1.5
1004069-4 3-Major BT1004069 Brute force attack is detected too soon 17.0.0, 16.1.2, 15.1.5, 14.1.4.5, 13.1.5
1004537-2 4-Minor BT1004537 Traffic Learning: Accept actions for multiple suggestions not localized 17.0.0, 16.1.2, 15.1.4


Application Visibility and Reporting Fixes

ID Number Severity Links to More Info Description Fixed Versions
932137-7 3-Major BT932137 AVR data might be restored from non-relevant files in /shared/avr_afm partition during upgrade 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4, 13.1.5
922105-1 3-Major BT922105 Avrd core when connection to BIG-IQ data collection device is not available 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4, 13.1.5
1035133-4 3-Major BT1035133 Statistics data are partially missing in various BIG-IQ graphs under "Monitoring" tab 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
948113-1 4-Minor BT948113 User-defined report scheduling fails 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1020705-2 4-Minor BT1020705 tmsh show analytics dos-l3 report view-by attack-id" shows "allowed-requests-per-second" instead "attack_type_name 17.0.0, 16.1.2, 15.1.3.1, 14.1.4.4


Access Policy Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1027217-1 1-Blocking BT1027217 Script errors in Network Access window using browser. 17.0.0, 16.1.2, 15.1.4.1
1006893-4 2-Critical BT1006893 Use of ACCESS::oauth after ACCESS::session create/delete may result in TMM core 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
993457-1 3-Major BT993457 TMM core with ACCESS::policy evaluate iRule 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1021485-3 3-Major BT1021485 VDI desktops and apps freeze with Vmware and Citrix intermittently 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1017233-2 3-Major BT1017233 APM uses wrong session key when iRule for ActiveSync is used resulting in passwords corruption 17.0.0, 16.1.2, 15.1.4.1
939877-3 4-Minor BT939877 OAuth refresh token not found 17.0.0, 16.1.2, 15.1.4, 14.1.4.4


Service Provider Fixes

ID Number Severity Links to More Info Description Fixed Versions
1007113-3 2-Critical BT1007113 Pool member goes DOWN if the time difference between SCTP INIT and SCTP ABORT is less than two seconds 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5
1018285-2 4-Minor BT1018285 MRF DIAMETER to select automatic removal of a persistence entry on completion of a transaction 17.0.0, 16.1.2, 15.1.4.1
1003633-1 4-Minor BT1003633 There might be wrong memory handling when message routing feature is used 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


Advanced Firewall Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1049229-1 2-Critical BT1049229 When you try to create a sub-rule under the Network Firewall rule list, the error: 'No Access' displays. 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


Traffic Classification Engine Fixes

ID Number Severity Links to More Info Description Fixed Versions
1013629-4 3-Major BT1013629 URLCAT: Scan finds many Group/User Read/Write (666/664/662) files 17.0.0, 16.1.2
686783-1 4-Minor BT686783 UlrCat custom database feed list does not work when the URL contains a www prefix or capital letters. 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5
1032689 4-Minor BT1032689 UlrCat Custom db feedlist does not work for some URLs 16.1.2, 15.1.4.1, 14.1.4.5


Device Management Fixes

ID Number Severity Links to More Info Description Fixed Versions
929213-2 3-Major BT929213 iAppLX packages not rolled forward after BIG-IP upgrade 17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4


SSL Orchestrator Fixes

ID Number Severity Links to More Info Description Fixed Versions
1038669-1 3-Major BT1038669 Antserver keeps restarting. 17.0.0, 16.1.2, 15.1.5
1032797-1 3-Major BT1032797 Tmm continuously cores when parsing custom category URLs 17.0.0, 16.1.2, 15.1.5



Cumulative fixes from BIG-IP v16.1.1 that are included in this release


Vulnerability Fixes

ID Number CVE Links to More Info Description Fixed Versions
954425-4 CVE-2022-23031 K61112120, BT954425 Hardening of Live-Update 17.0.0, 16.1.1, 15.1.4, 14.1.4.4
797797-7 CVE-2019-11811 K01512680, BT797797 CVE-2019-11811 kernel: use-after-free in drivers 17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.3
1013569-1 CVE-2022-31473 K34893234, BT1013569 Hardening of iApps processing 17.0.0, 16.1.1, 15.1.4
1008561-4 CVE-2022-23025 K44110411, BT1008561 In very rare condition, BIG-IP may crash when SIP ALG is deployed 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


Functional Change Fixes

ID Number Severity Links to More Info Description Fixed Versions
911141-1 3-Major BT911141 GTP v1 APN is not decoded/encoded properly 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


TMOS Fixes

ID Number Severity Links to More Info Description Fixed Versions
974241-3 2-Critical BT974241 Creation of access policy with modern customization may lead to failover in a VIPRION or vCMP guest with multiple blades 17.0.0, 16.1.1, 15.1.4
887117-4 3-Major BT887117 Invalid SessionDB messages are sent to Standby 17.0.0, 16.1.1, 15.1.4.1
1019829-2 3-Major BT1019829 Configsync.copyonswitch variable is not functioning on reboot 16.1.1
1018309-5 3-Major BT1018309 Loading config file with imish removes the last character 17.0.0, 16.1.1, 15.1.4.1


Local Traffic Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
1023341-1 1-Blocking   HSM hardening 17.0.0, 16.1.1, 15.1.5.1, 14.1.4.6, 13.1.5
995405-1 2-Critical BT995405 After upgrade, the copied SSL vhf/vht profile prevents traffic from passing 17.0.0, 16.1.3, 16.1.1
1040677 2-Critical BT1040677 BIG-IP D120 platform reports page allocation failures in N3FIPS driver 17.0.0, 16.1.1
980617-1 3-Major BT980617 SNAT iRule is not working with HTTP/2 and HTTP Router profiles 17.0.0, 16.1.1
912945-3 4-Minor BT912945 A virtual server with multiple client SSL profiles, the profile with CN or SAN of the cert matching the SNI is not selected if cert is ECDSA-signed 17.0.0, 16.1.1, 15.1.4, 14.1.4.4


Global Traffic Manager (DNS) Fixes

ID Number Severity Links to More Info Description Fixed Versions
1039069-1 1-Blocking BT1039069 Multiple issues affecting the RESOLV::lookup iRule command following the fix to ID1007049. 17.0.0, 16.1.1, 15.1.4
993489-1 3-Major BT993489 GTM daemon leaks memory when reading GTM link objects 17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.4, 13.1.5


Application Security Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
996381-1 2-Critical K41503304, BT996381 ASM attack signature may not match as expected 17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.4, 13.1.4.1
970329-1 2-Critical K70134152, BT970329 ASM hardening 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5
965229-5 2-Critical BT965229 ASM Load hangs after upgrade 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5
986937-3 3-Major BT986937 Cannot create child policy when the signature staging setting is not equal in template and parent policy 17.0.0, 16.1.1, 16.0.1.2, 15.1.4
981069-3 3-Major BT981069 Reset cause: "Internal error ( requested abort (payload release error))" 17.0.0, 16.1.1, 15.1.4
962589-4 3-Major BT962589 Full Sync Requests Caused By Failed Relayed Call to delete_suggestion 17.0.0, 16.1.1, 15.1.4, 14.1.4.4
951133-4 3-Major BT951133 Live Update does not work properly after upgrade 17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.4
920149-3 3-Major BT920149 Live Update default factory file for Server Technologies cannot be reinstalled 17.0.0, 16.1.1, 15.1.4.1, 14.1.4.4
888289-8 3-Major BT888289 Add option to skip percent characters during normalization 17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.2, 13.1.4.1
1005105-3 3-Major BT1005105 Requests are missing on traffic event logging 17.0.0, 16.1.1, 15.1.4, 14.1.4.5
1000741-1 3-Major K67397230, BT1000741 Fixing issue with input normalization 17.0.0, 16.1.1, 15.1.4, 14.1.4.4
941625-3 4-Minor BT941625 BD sometimes encounters errors related to TS cookie building 17.0.0, 16.1.1, 15.1.4


Application Visibility and Reporting Fixes

ID Number Severity Links to More Info Description Fixed Versions
924945-5 3-Major BT924945 Fail to detach HTTP profile from virtual server 17.0.0, 16.1.1, 16.0.1.2, 15.1.3
913085-6 3-Major BT913085 Avrd core when avrd process is stopped or restarted 17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.2, 13.1.4.1
909161-1 3-Major BT909161 A core file is generated upon avrd process restart or stop 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


Access Policy Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
979877-9 3-Major   CVE-2020-1971 OpenSSL: EDIPARTYNAME NULL pointer de-reference vulnerability description and available information 16.1.1, 14.1.5.1
1024101-1 3-Major BT1024101 SWG as a Service license improvements 17.0.0, 16.1.3, 16.1.1
1022625-2 3-Major BT1022625 Profile type 'swg-transparent' should be selected on create page when 'create-new' is selected for SwgAsService in SSL Orchestrator 17.0.0, 16.1.1


Service Provider Fixes

ID Number Severity Links to More Info Description Fixed Versions
993913-4 2-Critical BT993913 TMM SIGSEGV core in Message Routing Framework 17.0.0, 16.1.1, 15.1.4, 14.1.4.4
1012721-4 2-Critical BT1012721 Tmm may crash with SIP-ALG deployment in a particular race condition 17.0.0, 16.1.1, 15.1.4.1, 14.1.4.4, 13.1.5
1007821-3 2-Critical BT1007821 SIP message routing may cause tmm crash 17.0.0, 16.1.1, 15.1.4
996113-2 3-Major BT996113 SIP messages with unbalanced escaped quotes in headers are dropped 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5
805821-1 3-Major BT805821 GTP log message contains no useful information 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5
919301-1 4-Minor BT919301 GTP::ie count does not work with -message option 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5
913413-1 4-Minor BT913413 'GTP::header extension count' iRule command returns 0 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5
913409-1 4-Minor BT913409 GTP::header extension command may abort connection due to unreasonable TCL error 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5
913393-1 5-Cosmetic BT913393 Tmsh help page for GTP iRule contains incorrect and missing information 17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


Advanced Firewall Manager Fixes

ID Number Severity Links to More Info Description Fixed Versions
992213-3 3-Major BT992213 Protocol Any displayed as HOPTOPT in AFM policy view 17.0.0, 16.1.1, 15.1.4, 14.1.4.2
1000405-1 3-Major BT1000405 VLAN/Tunnels not listed when creating a new rule via GUI 17.0.0, 16.1.1, 15.1.4


Protocol Inspection Fixes

ID Number Severity Links to More Info Description Fixed Versions
1018145 3-Major BT1018145 Firewall Manager user role is not allowed to configure/view protocol inspection profiles 16.1.1, 15.1.4

 

Cumulative fix details for BIG-IP v16.1.3.3 that are included in this release

999901-1 : Certain LTM policies may not execute correctly after a system reboot or TMM restart.

Links to More Info: K68816502, BT999901

Component: Local Traffic Manager

Symptoms:
After a system reboot or TMM restart, LTM policies referencing an external data-group may not execute correctly, regardless of a successful matching condition.

This can cause a wide range of issues, including misrouted traffic, unshaped traffic, the bypassing of ASM, or complete traffic failure (based on the policy actions).

Note that if a virtual server references multiple LTM policies, and only some of those policies reference an external data-group, all LTM policies attached to the virtual server will be affected.

Conditions:
-- LTM policy with an external data-group configured on a virtual server.
-- System reboot or TMM restart.

Impact:
LTM policies may be unable to execute the appropriate action on a successful matching condition, leading to a wide range of traffic-impacting consequences.

Workaround:
Remove and re-add the affected policy to the desired virtual-server. Alternatively, to fix a wider number of affected virtual servers in one go, reload the system configuration by executing 'tmsh load sys config'.

Fix:
TMM now loads LTM policies with external data-groups as expected.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


999881-6 : Tcl command 'string first' not working if payload contains Unicode characters.

Links to More Info: BT999881

Component: Local Traffic Manager

Symptoms:
Tcl command 'string first' returns an incorrect value when Unicode characters are present in the payload.

Conditions:
-- Tcl command 'string first' is used in iRules.
-- Payload contains Unicode characters.

Impact:
Traffic processing with iRules that contains the 'string first' command might not work as expected.

Workaround:
You can use any of the following workarounds:

-- Use iRuleLX.
-- Do not use Unicode characters in the payload.
-- Use a custom Tcl proc to iterate through the string using lindex

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


999125-1 : After changing management IP addresses, devices can be stuck indefinitely in improper Active/Active or Standby/Standby states.

Links to More Info: BT999125

Component: TMOS

Symptoms:
After a device (or multiple devices) in a sync-failover device-group undergoes a management IP change, multiple devices in the group can be stuck indefinitely in improper Active/Active or Standby/Standby failover states.

Conditions:
-- One or more devices belonging to a sync-failover device-group undergo a management IP change.

Impact:
-- The affected units are unable to pass traffic, as they are either both Standby or Active (resulting in either no service availability or IP address conflicts in the network).

Workaround:
If you are planning to change management IP addresses on your devices, consider doing so during a maintenance window, in order to account for the eventuality this issue might occur.

Then, if this issue does occur, you can restore correct system functionality by restarting the sod daemon on all units that had their management IP address changed. To do so, run the following command:

tmsh restart sys service sod

Note: This is a one-time workaround, and the issue may re-occur if the devices undergo further management IP address changes in the future.

Fix:
Redundant devices remain in the correct failover state following a management IP address change.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


999097-1 : SSL::profile may select profile with outdated configuration

Links to More Info: BT999097

Component: Local Traffic Manager

Symptoms:
Under some circumstances, an iRule-selected SSL profile may a send previously configured certificate to the peer.

Conditions:
iRule command SSL::profile is used to select a profile that is not attached to the virtual server, and changes have been made in the profile's cert-key-chain field.

Impact:
The TLS client may receive an outdated certificate that does not match with the current configuration, potentially leading to handshake failures.

Workaround:
Avoid making changes to a profile that is actively being used by the iRule command.

Fix:
The system now makes sure that SSL profiles are properly reloaded after changes are made.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


998221-1 : Accessing pool members from configuration utility is slow with large config

Links to More Info: BT998221

Component: TMOS

Symptoms:
Accessing the pool members page from the BIG-IP Configuration Utility/GUI is slow compared with accessing Pool members from TMSH/CLI.

Conditions:
-- Accessing pool member information through the BIG-IP configuration utility.
-- Thousands of pools and pool members in the configuration.

Impact:
In the GUI, it takes approximately 20-30 seconds, whereas the CLI returns results in less than 1 second,

Managing pool members from configuration utility is very slow causing performance impact.

Workaround:
None

Fix:
Optimized the GUI query used for retrieving pool members data.

Fixed Versions:
17.0.0, 16.1.2, 16.0.1.2, 15.1.4, 14.1.4.3


997313-2 : Unable to create APM policies in a sync-only folder

Links to More Info: BT997313

Component: TMOS

Symptoms:
Unable to configure an APM policy in a sync-only folder, or the configuration fails to load after an upgrade, with an error message similar to:

-- err mcpd[mcpd_pid]: 01070734:3: Configuration error: Invalid Devicegroup Reference. The customization_group (/Common/sync-only/example_apm_customization) requires customization_source (/Common/standard) to be syncd to the same devices

Conditions:
-- Multiple BIG-IP devices configured in a sync-only device group, but different/non-overlapping failover device groups
-- APM policy being created in a folder or partition associated with sync-only device group.

Impact:
-- Unable to create the access policy.
-- The configuration fails to load and the device remains inoperative.

Workaround:
You can use either of the following strategies to prevent the issue:

--Do not create APM policies in a sync-only folder.

--Disable MCPD device-group reference validation for the sync-only folder, e.g.:
    tmsh modify sys folder /Common/sync-only no-ref-check true
    tmsh save sys config

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1


996381-1 : ASM attack signature may not match as expected

Links to More Info: K41503304, BT996381

Component: Application Security Manager

Symptoms:
When processing traffic with ASM, attack signature 200000128 may not match as expected.

Conditions:
- Attack signature 200000128 enabled.

Impact:
Processed traffic may not match all expected attack signatures

Workaround:
N/A

Fix:
Attack signature 200000128 now matches as expected.

Fixed Versions:
17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.4, 13.1.4.1


996233-1 : Tomcat may crash while processing TMUI requests

Links to More Info: K38893457, BT996233


996113-2 : SIP messages with unbalanced escaped quotes in headers are dropped

Links to More Info: BT996113

Component: Service Provider

Symptoms:
Dropped SIP messages.

Conditions:
-- MRF SIP virtual server
-- SIP Header Field has an escaped quote

Impact:
Certain SIP messages are not being passed via MRF.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


996001-5 : AVR Inspection Dashboard 'Last Month' does not show all data points

Links to More Info: BT996001

Component: TMOS

Symptoms:
A daily-based report (report with resolution of one day in each data-point) can be provided to only request with up-to 30 days. A request with 31 days shows only 2 entries.

Conditions:
This occurs when generating a 'Last Month' report for a month that contains 31 days of data.

Impact:
AVR Inspection Dashboard displays less data than expected: 2 points instead of 31 points.

Workaround:
None

Fix:
Viewing a 'Last Month' graph now reports ~30 days worth of data, rather than a variable amount of data based on actual calendar periods.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


995405-1 : After upgrade, the copied SSL vhf/vht profile prevents traffic from passing

Links to More Info: BT995405

Component: Local Traffic Manager

Symptoms:
After an RPM upgrade, SSL Orchestrator traffic does not pass

Conditions:
Upgrading SSL Orchestrator via RPM

Impact:
Traffic will not pass.

Workaround:
Bigstart restart tmm

Fix:
Fixed an issue that was preventing from passing after an RPM upgrade.

Fixed Versions:
17.0.0, 16.1.3, 16.1.1


994305-3 : The version of open-vm-tools included with BIG-IP Virtual Edition is 10.1.5

Links to More Info: BT994305

Component: TMOS

Symptoms:
Features supported in newer versions of open-vm-tools are not available.

Conditions:
This issue may be seen when running in VMware environments.

Impact:
Features that require a later version of open-vm-tools are not available.

Workaround:
None.

Fix:
The version of open-vm-tools has been updated to 11.1.5.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1


993981-3 : TMM may crash when ePVA is enabled

Links to More Info: K52340447, BT993981


993913-4 : TMM SIGSEGV core in Message Routing Framework

Links to More Info: BT993913

Component: Service Provider

Symptoms:
TMM crashes on SIGSEGV.

Conditions:
This can occur while passing traffic through the message routing framework.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4


993613-7 : Device fails to request full sync

Links to More Info: BT993613

Component: Application Security Manager

Symptoms:
Devices remain out of sync and ASM REST/GUI becomes unresponsive. asm_config_server may create many unique PIDs

Conditions:
-- A manual sync device group is configured and ASM sync is enabled.
-- Sync pushes are typically performed in one direction, and then a sync attempt is made in the opposite direction.

Impact:
-- The device that is meant to receive the config sync never requests or receives it.
-- The devices become unsynchronized which may cause unexpected traffic enforcement or dropped traffic.
-- ASM GUI becomes unresponsive.
-- Large number of asm_config_server processes increases host memory usage

Workaround:
Halting asm_config_server on the stuck device restores the working state and request a new sync.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


993517-1 : Loading an upgraded config can result in a file object error in some cases

Links to More Info: BT993517

Component: Local Traffic Manager

Symptoms:
After an upgrade from a version prior to 13.1.0, when loading a configuration that has had an HTTPS monitor in it, if that configuration has not yet been saved, you may see errors like this in the LTM log:

-- 0107134a:3: File object by name (DEFAULT) is missing.

If you run 'tmsh load sys config verify' on this configuration, the system also posts the error on the screen.

Conditions:
-- Upgrading from a version prior to 13.1.0.
-- At least one HTTPS monitor that has the kEDH cipher in its cipherlist.
-- Upgrading to version 13.1.1.4 or later.
-- Loading the configuration (either automatically on startup, or manually).

Impact:
Other than the error message, there is no impact.

Workaround:
After the initial reboot, save the configuration.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


993489-1 : GTM daemon leaks memory when reading GTM link objects

Links to More Info: BT993489

Component: Global Traffic Manager (DNS)

Symptoms:
The gtmd process memory consumption is higher than expected.

Conditions:
DNS is provisioned and a provisioned GTM link object has been loaded.

Impact:
Increased memory usage of the GTM daemon. This may impact other capabilities, such as starting sync operations.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.4, 13.1.5


993457-1 : TMM core with ACCESS::policy evaluate iRule

Links to More Info: BT993457

Component: Access Policy Manager

Symptoms:
TMM segfaults in packtag_literal_pointer_release() during TCLRULE_CLIENT_CLOSED event attempting a session release.

Conditions:
-- The ACCESS::policy evaluate is still in progress when TCLRULE_CLIENT_CLOSED event is triggered.
-- While the TCLRULE_CLIENT_CLOSED is in process, the ACCESS::policy evaluation completes.

Impact:
This triggers a race condition and causes the tmm crash. Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
TMM no longer crashes and generates a core file during the ACCESS::policy evaluate iRule under these conditions.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


992865-3 : Virtual server may not enter hardware SYN cookie mode on BIG-IP i11000 and i15000 series appliances

Links to More Info: BT992865

Component: TMOS

Symptoms:
On particular platforms, virtual servers do not correctly enter hardware SYN cookie mode. Software SYN cookie mode still functions correctly.

Conditions:
-- Virtual server under SYN flood attack.
-- One of the following platforms
  + BIG-IP i11000 series (C123)
  + BIG-IP i15000 series (D116)

Impact:
Software SYN cookies are enabled, this has a performance impact compared to the hardware mode.

Workaround:
None

Fix:
Virtual servers correctly enter hardware SYN cookie mode on all platforms.

Fixed Versions:
16.1.2.2, 15.1.4


992213-3 : Protocol Any displayed as HOPTOPT in AFM policy view

Links to More Info: BT992213

Component: Advanced Firewall Manager

Symptoms:
The 'any' option for the AFM policy rule protocol is displayed incorrectly in the GUI.

Conditions:
-- Create a rule and set protocol as 'any'.
-- Navigate to active rules.

Impact:
GUI shows an incorrect value.

Workaround:
None

Fix:
GUI Shows correct value for rule protocol option.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.2


992121-4 : REST "/mgmt/tm/services" endpoint is not accessible

Links to More Info: BT992121

Component: TMOS

Symptoms:
Accessing "/mgmt/tm/services" failed with a null exception and returned 400 response.

Conditions:
When accessing /mgmt/tm/services through REST API

Impact:
Unable to get services through REST API, BIG-IQ needs that call for monitoring.

Fix:
/mgmt/tm/services through REST API is accessible and return the services successfully.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


992073-2 : APM NTLM Front End Authentication errors ECA_ERR_INPROGRESS

Links to More Info: K93543114, BT992073


991421-2 : TMM may crash while processing TLS traffic

Links to More Info: K91013510, BT991421


990461-5 : Per virtual server SYN cookie threshold is not preserved or converted during a software upgrade

Links to More Info: BT990461

Component: Advanced Firewall Manager

Symptoms:
If the original per virtual server SYN cookie threshold value was greater than 4095, the value is not preserved or converted correctly after a software upgrade from v12.x to a later version.

Conditions:
-- Per virtual server SYN cookie threshold is set.
-- SYN cookie threshold is set to a value higher than 4095.

Impact:
A change in the SYN cookie threshold value in the virtual server context may result in a change in DoS behavior, depending on your configuration.

Workaround:
Manually update the SYN cookie threshold values after an upgrade.

Fixed Versions:
16.1.3, 15.1.6.1, 14.1.4.4


989701-8 : CVE-2020-25212 Kernel: A flaw was found in the NFSv4 implementation where when mounting a remote attacker controlled server it could return specially crafted response

Links to More Info: K42355373, BT989701


989517-3 : Acceleration section of virtual server page not available in DHD

Links to More Info: BT989517

Component: TMOS

Symptoms:
Cannot use Advanced Menu to create a virtual server for HTTP/2 on systems with DHD licenses. This occurs because the Acceleration section is not available.

You can via TMSH then it works, but at as soon as you use the GUI to modify the virtual server, it loses the HTTP/2 configuration.

Conditions:
The Acceleration section is not visible in case 'DoS' is provisioned (available with the DHD license).

Impact:
1) You are unable to use the GUI to modify any parameters of the Acceleration table in the virtual server page.

2) Loss of configuration items if making changes via the GUI.

Workaround:
A virtual server with parameters present in the Acceleration table can still be created using TMSH. However, do not edit that virtual server in the GUI, or the Acceleration parameters will be lost.

Fix:
The Acceleration table is now visible, and there is no loss of configuration items if making changes via the GUI.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1


988549-10 : CVE-2020-29573: glibc vulnerability

Links to More Info: K27238230, BT988549


988165-3 : VMware CPU reservation is now enforced.

Links to More Info: BT988165

Component: TMOS

Symptoms:
CPU reservation is not enabled which can result in insufficient CPU resource for virtual edition guest.

Conditions:
BIG-IP Virtual Edition running in VMware.

Impact:
Performance may be lower than expected particularly if ESXi is over subscribed and traffic volume is high.

Workaround:
Manually enforce the 2GHz per core rule when provisioning VMware instances to ensure that your VMware hosts are not oversubscribed.

Fix:
The VMware CPU reservation of 2GHz per core is now automatically enabled in the OVF file. The CPU reservation can be up to 100 percent of the defined virtual machine hardware. For example, if the hypervisor has 2.0 GHz cores, and the VE is set to 4 cores, you will see 4 x 2.0 GHz reserved for 8GHz (or 8000 MHz).

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


987885-6 : Half-open unclean SSL termination might not close the connection properly

Links to More Info: BT987885

Component: Local Traffic Manager

Symptoms:
Upon receiving TCP FIN from the client in the middle of the SSL Application Data, the BIG-IP system does not close the connection on either client- or server-side (i.e., it does not 'forward' the FIN on the server-side as it normally does) causing the connection to go stale until the timeout is reached.

Conditions:
-- TCP and SSL profiles configured on a virtual server.
-- Client terminates the connection in the middle of an SSL record.

Impact:
Connection termination does not happen. Connection remains in the connection table until idle timeout is reached.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


987341-1 : BIG-IP OpenID Connect Discovery process does not support strong TLS ciphers.

Links to More Info: BT987341

Component: Access Policy Manager

Symptoms:
BIG-IP discovers and updates JSON Web Keys (JWK) in OpenID Connect (OIDC) deployments using a Java Runtime Environment (JRE). The JRE in BIG-IP does not support strong TLS ciphers, so the discovery/update process can fail against OIDC providers that enforce strong encryption requirements.

Conditions:
Using an OpenID Connect provider that allows only strong TLS ciphers. and using an APM configuration that validates incoming JWTs against a dynamic JWK list in Internal Validation Mode.

Impact:
This might cause discovery to fail against certain OpenID Connect auth providers that enforce strong cipher requirements. It could lead to JWT validation failure as the JWK expire and cannot be updated by BIG-IP.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5


987077-3 : TLS1.3 with client authentication handshake failure

Links to More Info: BT987077

Component: Local Traffic Manager

Symptoms:
SSL handshakes fail, and TLS clients send 'Bad Record MAC' errors.

Conditions:
-- LTM authentication profile using OCSP and TLS1.3.
-- Client application data arrives during LTM client authentication iRule.

Impact:
-- A handshake failure occurs.
-- Client certificate authentication may pass without checking its validity via OCSP.

Workaround:
Use TLS1.2 or use TLS1.3 without the LTM authentication profile.

Fix:
Handshake completes if using TLS1.3 with client authentication and LTM auth profile.

Fixed Versions:
17.0.0, 16.1.3, 15.1.5.1, 14.1.4.6


986937-3 : Cannot create child policy when the signature staging setting is not equal in template and parent policy

Links to More Info: BT986937

Component: Application Security Manager

Symptoms:
When trying to create a child policy, you get an error:

FAILURE: "Could not update the Policy policy1. Inherited values may not be changed."

Conditions:
-- Parent policy created with signature staging disabled.
-- Creating a new child policy with that policy as a parent.

Impact:
You are unable to create the child policy and the system presents an error.

Workaround:
Create the policy without assigning it to the parent, and then assign it to the parent policy on the Inheritance Settings page.

Fix:
The error no longer occurs on child policy creation.

Fixed Versions:
17.0.0, 16.1.1, 16.0.1.2, 15.1.4


985953-6 : GRE Transparent Ethernet Bridging inner MAC overwrite

Links to More Info: BT985953

Component: TMOS

Symptoms:
Traffic not being collected by virtual server and therefore not being forwarded to the nodes.

Conditions:
Encapsulated dest-mac is not equal to the Generic Routing Encapsulation (GRE) tunnel mac-address.

Impact:
Virtual server is not collecting decapsulated packets from the GRE Transparent Bridge tunnel unless the dest-mac of the encapsulated packet is the same as the mac-address of the GRE tunnel.

Workaround:
None

Fix:
Added a new DB key 'iptunnel.mac_overwrite'. This DB key defaults to 'disable'.

Set the DB key to 'enable' to cause the BIG-IP system to overwrite the destination MAC of the encapsulated traffic:

tmsh modify sys db iptunnel.mac_overwrite value enable
tmsh save sys config

This allows virtual servers on the BIG-IP system to process traffic.

Behavior Change:
Added a new DB key 'iptunnel.mac_overwrite'. This DB key defaults to 'disable'.

To cause the BIG-IP system to overwrite the destination MAC of the encapsulated traffic, set the DB key to 'enable' and save the config:

tmsh modify sys db iptunnel.mac_overwrite value enable
tmsh save sys config

This allows virtual servers on the BIG-IP system to process traffic.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


984749-1 : Discrepancy between DNS cache statistics "Client Summary" and "Client Cache."

Links to More Info: BT984749

Component: Global Traffic Manager (DNS)

Symptoms:
"show ltm dns cache", shows difference between "Client Summary" and "Client Cache".

Conditions:
Create a resolver type DNS cache, attach to a DNS profile, and attach to a virtual server. Send queries to virtual server. Compare/review result of "show ltm dns cache."

Impact:
Client Cache Hit/Miss Statistics ratio affected.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


984593-1 : BD crash

Links to More Info: BT984593

Component: Application Security Manager

Symptoms:
BD crashes.

Conditions:
The conditions under which this occurs are unknown.

Impact:
Traffic disrupted while bd restarts.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


984585-3 : IP Reputation option not shown in GUI.

Links to More Info: BT984585

Component: TMOS

Symptoms:
Cannot configure IP Reputation option from the GUI.

Conditions:
Configuring the LTM policy type 'IP Reputation' using the GUI, when the 'IP Intelligence' module is licensed in time-limited modules.

Impact:
The IP Reputation option is not shown in GUI configuration list. Cannot create LTM policies with IP Reputation.

Workaround:
Use tmsh to configure IP Reputation.

Fix:
The IP Reputation option is now shown in the GUI.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


982785-2 : Guided Configuration hardening

Links to More Info: K52322100


982757-3 : APM Access Guided Configuration hardening

Links to More Info: K53197140


982697-7 : ICMP hardening

Links to More Info: K41440465, BT982697


982341-7 : iControl REST endpoint hardening

Links to More Info: K53197140, BT982341


981069-3 : Reset cause: "Internal error ( requested abort (payload release error))"

Links to More Info: BT981069

Component: Application Security Manager

Symptoms:
An unexpected RST occurs on inbound traffic. The RST cause shows "Internal error ( requested abort (payload release error))"

Conditions:
When all the following conditions are met:
- The system was upgraded to a version where ID910253 is fixed
- TS cookie coming from a previous version
- data guard in non blocking (masking)
- response that is not zipped and has a textual content type

Impact:
Traffic is affected.

Workaround:
Any of the following actions can resolve the issue:

1. Turn off data guard or change it to blocking.
2. Make the server reply with zipped responses (perhaps by adding the accept-encoding: gzip using an iRule).
3. Add an additional response related feature.
4. Use the following iRule in case there aren't cookie related enforcement:
when HTTP_REQUEST {
  set cookies [HTTP::cookie names]
  foreach aCookie $cookies {
    if {$aCookie matches_regex {^TS(?:[0-9a-fA-F]{6,8})(?:$|_[0-9]+$)}} {
      HTTP::cookie remove $aCookie
    }
  }
}

Fix:
Fixed an issue that was triggering resets on traffic.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4


980617-1 : SNAT iRule is not working with HTTP/2 and HTTP Router profiles

Links to More Info: BT980617

Component: Local Traffic Manager

Symptoms:
On HTTP/2 full-proxy virtual servers, the snatpool command in an iRule is accepted but the source address server-side is not changed.

Conditions:
1.) Basic HTTP profile and HTTP/2 profile is configured on BIG-IP systems
2.) iRule with snatpool <pool_name>, snat <IP> is configured

Impact:
Unable to use snatpool (and possibly snat) in iRule to control the server-side source address.

Workaround:
Configure SNAT under the virtual server configuration, rather than in an iRule.

Fixed Versions:
17.0.0, 16.1.1


979877-9 : CVE-2020-1971 OpenSSL: EDIPARTYNAME NULL pointer de-reference vulnerability description and available information

Component: Access Policy Manager

Symptoms:
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-1971

The X.509 GeneralName type is a generic type for representing different types of names. One of those name types is known as EDIPartyName. The OpenSSL provides a function GENERAL_NAME_cmp which compares different instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereferences and a crash may occur leading to a possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes:

1) Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate

2) When verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token)

If an attacker can control both items being compared then that attacker could trigger a crash. For example, if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a certificate. This checking happens prior to the signatures on the certificate and CRL being verified. OpenSSL's s_server, s_client and verify tools have to support the "-crl_download" option which implements automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of EDIPARTYNAME. However, it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue. Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected 1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w).

Conditions:
The GENERAL_NAME_cmp, a comparison function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME.

Impact:
If the EDIPARTYNAME object or one of the member variables is NULL then the NULL pointer dereferences and a crash may occur leading to a possible denial of service attack.

Workaround:
No workaround

Fix:
The EDITPARTYNAME Comparision is modified by integrating the patch provided in the https://github.com/openssl/openssl/commit/f960d81215ebf3f65e03d4d5d857fb9b666d6920

Fixed Versions:
16.1.1, 14.1.5.1


977761 : Connections are dropped if a certificate is revoked.

Links to More Info: BT977761

Component: Local Traffic Manager

Symptoms:
SSL handshake failures occur with the backend server revoked certificate in case of reverse proxy.

Conditions:
1. BIG-IP LTM configured as SSL reverse proxy.
2. revoked-cert-status-response-control set to ignore in the server ssl profile.
3. server certificate authentication set to "require" in the server ssl profile.

Impact:
Ssl handshake failures due to revoked server certificate

Workaround:
1. Set the server certificate authentication to ignore in the server ssl profile.

Fix:
Added checks to validate the certificate as well as the flags set (ignore/drop) for the revoked certificate.

Fixed Versions:
16.1.2.2


977153-3 : Packet with routing header IPv6 as next header in IP layer fails to be forwarded

Links to More Info: BT977153

Component: Advanced Firewall Manager

Symptoms:
BIG-IP systems fail to follow RFC 5095, which specifies the traffic should be forwarded.

Conditions:
This symptom is found when the following conditions are met:
-- An IPv6 packet whose Next Header in IP header is Routing Header IPv6.
-- In the Routing Header IPv6 header, the Type field is 0.
-- In the Routing Header IPv6 header, the Segment Left field is 0.

Impact:
This failure in forwarding ICMP error message prevents the BIG-IP AFM product from completing certification.

Workaround:
None.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


976669-5 : FIPS Integrity check fails for other secondary blades after rebooting/replacing secondary blade

Links to More Info: BT976669

Component: TMOS

Symptoms:
After rebooting or replacing a secondary blade, the FIPS integrity check fails for other secondary blades and they fail to fully boot.

Conditions:
This can occur after rebooting or replacing a secondary blade.

Impact:
When the FIPS integrity checks fail the blades won't fully boot.

Workaround:
On the secondary blade reboot, the following critical files are deleted from other secondary blades which leads to FIPS integrity check failure:

/root/.ssh/authorized_keys
/root/.ssh/known_hosts

To mitigate, copy the missing files from the primary blade to the secondary blade.

From the primary blade, issue the following command towards the secondary blade(s).

rsync -avz -e ssh /root/.ssh/* root@<Secondary Blade>:/root/.ssh/

Fix:
Critical files are not deleted during secondary blade reboot.

Fixed Versions:
17.0.0, 16.1.2.2, 16.1.0, 15.1.5.1, 14.1.4.6


976337-2 : i40evf Requested 4 queues, but PF only gave us 16.

Links to More Info: BT976337

Component: TMOS

Symptoms:
During BIG-IP system boot, a message is logged:

i40evf 0000:05:00.0: Requested 4 queues, but PF only gave us 16.

Conditions:
-- BIG-IP Virtual Edition configured for SR-IOV
-- E810 virtual functions (VFs)

Impact:
A message is logged but it is benign and can be ignored.

Fixed Versions:
16.1.2.2, 15.1.5.1


974341-6 : REST API: File upload

Links to More Info: K08402414, BT974341


974241-3 : Creation of access policy with modern customization may lead to failover in a VIPRION or vCMP guest with multiple blades

Links to More Info: BT974241

Component: TMOS

Symptoms:
Mcpd exists with error similar to:

01070734:3: Configuration error: Configuration from primary failed validation: 010713cf:3: Configuration group '/Common/test1_end_deny_ag' has invalid source '/Common/standard'

Conditions:
1. VIPRION or vCMP guest with multiple blades in a cluster
2. Create a access policy with modern customization enabled

Impact:
Mcpd restarts leading to failover.

Workaround:
Use standard customization and not modern customization.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4


973409-6 : CVE-2020-1971 - openssl: EDIPARTYNAME NULL pointer de-reference

Links to More Info: K42910051, BT973409


972517-7 : Appliance mode hardening

Component: Local Traffic Manager

Symptoms:
Appliance mode license restrictions do not follow current best practices.

Conditions:
- Appliance-mode license
- Authenticated administrative user
- Monitors in use

Impact:
Appliance mode does not follow current best practices.

Workaround:
N/A

Fix:
Appliance mode now follows current best practices.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5


972489-7 : BIG-IP Appliance Mode iControl hardening

Links to More Info: K11010341, BT972489


970329-1 : ASM hardening

Links to More Info: K70134152, BT970329

Component: Application Security Manager

Symptoms:
Under certain conditions, ASM does not follow current best practices.

Conditions:
- ASM provisioned

Impact:
Attack detection is not triggered as expected

Workaround:
N/A

Fix:
Attack detection is now triggered as expected

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


969317-4 : "Restrict to Single Client IP" option is ignored for vmware VDI

Links to More Info: BT969317

Component: Access Policy Manager

Symptoms:
The Restrict to Single Client IP option in the Access Policy is not being honored for VMware VDI.

Conditions:
- Configure APM Webtop with vmware VDI.
- Set "Restrict to Single Client IP" option in Access Profile.
- Try to launch vmware desktop on one client. Copy the launch URI
- Try to launch vmware desktop from other client using the copied URI.

Impact:
A connection from the second client is allowed, but it should not be allowed.

Fix:
Restrict to Single Client IP is honored for VMware VDI for both PCOIP and Blast protocols.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.4.1, 14.1.4.5


969297 : Virtual IP configured on a system with SelfIP on vwire becomes unresponsive

Links to More Info: BT969297

Component: SSL Orchestrator

Symptoms:
Virtual IP ARP does not get resolved when a SelfIP is configured on a virtual-wire.

Conditions:
Issue happens when a SelfIP address is configured and a Virtual IP address is configured for a Virtual Server.

Impact:
The virtual server is unreachable.

Workaround:
None

Fix:
ARP forwarding to peer is decided based on whether Virtual IP and self-IP is configured or not.

Fixed Versions:
16.1.2.2


968929-2 : TMM may crash when resetting a connection on an APM virtual server

Links to More Info: BT968929

Component: Local Traffic Manager

Symptoms:
TMM crashes.

Conditions:
- HTTP profile without fallback host.
- iRules.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Configure fallback host to an HTTP profile that redirects the request to a specified location.

Fixed Versions:
17.0.0, 16.1.2.2


968893-3 : TMM crash when processing APM traffic

Links to More Info: K93526903, BT968893


968657-1 : Added support for IMDSv2 on AWS

Links to More Info: BT968657

Component: TMOS

Symptoms:
AWS added a token-based Instance MetaData Service API (IMDSv2). Prior versions of BIG-IP Virtual Edition supported only a request/response method (IMDSv1). When the AWS API is starting with IMDSv2, you will receive the following error message:

get_dossier call on the command line fails with:
        01170003:3: halGetDossier returned error (1): Dossier generation failed.

This latest version of BIG-IP Virtual Edition now supports instances started with IMDSv2.

Conditions:
AWS instances started with IMDSv2.

Impact:
BIG-IP Virtual Edition cannot license or re-license AWS instances started with IMDSv2 and other metadata-based functionality will not function.

Fix:
With the latest version of BIG-IP VE, you can now initialize "IMDSv2 only" instances in AWS and migrate your existing instances to "IMDSv2 only" using aws-cli commands. For details, consult documentation: https://clouddocs.f5.com/cloud/public/v1/shared/aws-ha-IAM.html#check-the-metadata-service-for-iam-role
 
IMDSv2 documentation from AWS: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/configuring-instance-metadata-service.html

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1


968581-4 : TMSH option max-response for "show /ltm profile ramcache" command may not comply with its description

Links to More Info: BT968581

Component: Local Traffic Manager

Symptoms:
The TMSH command "show /ltm profile ramcache" has a max-response option to output a number of records designated in this parameter. Due to calculation algorithm, the command may output less records than RAMCACHE stores or more records than the limit prescribes.

Conditions:
-- A virtual server is configured on BIG-IP.
-- A webacceleration profile with no web application is attached to the virtual server.
-- Traffic is sent over the virtual server with a number of unique cacheable documents that exceed a designated limit.

Impact:
Output of the command may not match to actual list of stored documents in RAMCACHE.

Fix:
Command "show /ltm /profile ramcache" respects a limit defined as "max-response" parameter.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5


967101-1 : When all of the interfaces in the trunk are brought up, Gratuitous ARP is not being sent out.

Links to More Info: BT967101

Component: Local Traffic Manager

Symptoms:
Gratuitous ARP (GARP) messages are dropped at the time of sending GARP because the number of links up in the trunk is 0 (which returns "error 18" ... ERR_NOT_FOUND)

Conditions:
-- Two BIG-IP systems with switchless configuration, such as i2xxx and i4xxx.
-- Bring down and up the interfaces at the same time in the trunk.

Impact:
Neighboring device arp table is not updated about the BIG-IP interface status, because no gratuitous ARP message is sent out.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


965853-6 : IM package file hardening

Links to More Info: K08510472, BT965853


965785-4 : Active/Standby sync process fails to populate table DCC.HSL_DATA_PROFILES on standby machine

Links to More Info: BT965785

Component: Application Security Manager

Symptoms:
DCC.HSL_DATA_PROFILES table on standby machine stay empty after sync process. Error for DB insert failure into table DCC.HSL_DATA_PROFILES thrown in asm_config_server.log.

Conditions:
There is no specific condition, the problem occurs rarely.

Impact:
Sync process requires an additional ASM restart

Workaround:
Restart ASM after sync process finished

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


965229-5 : ASM Load hangs after upgrade

Links to More Info: BT965229

Component: Application Security Manager

Symptoms:
ASM upgrade hangs, and you see the following in
var/log/ts/asm_start.log:
-------------------------
asm_start|DEBUG|Nov 15 07:04:41.751|25365|F5::ConfigSync::restore_active_policies,,Restoring active policy - policy /Common/my_portal (id = 603)
... END OF FILE ...
-------------------------

In /var/log/asm:
-----------------------------
2020-11-15T06:01:23+00:00 localhost notice boot_marker : ---===[ HD1.cm6250 - BIG-IP 13.1.3.4 Build 0.255.5 <HD1.cm6250> ]===---
 info set_ibdata1_size.pl[20499]: Setting ibdata1 size finished successfully, a new size is: 9216M
 info tsconfig.pl[24675]: ASM initial configration script launched
 info tsconfig.pl[24675]: ASM initial configration script finished
 info asm_start[25365]: ASM config loaded
 err asm_tables_dump.pl[31430]: gave up waiting for ASM to start, please try again later
-----------------------------

Conditions:
-- ASM provisioned
-- 600 or more security policies
-- Performing an upgrade

Impact:
ASM post upgrade config load hangs and there are no logs or errors

Workaround:
None

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


964625-5 : Improper processing of firewall-rule metadata

Links to More Info: BT964625

Component: Advanced Firewall Manager

Symptoms:
The 'mcpd' process may suffer a failure and be restarted.

Conditions:
Adding very large firewall-policy rules, whether manually, or from config-sync, or from BIG-IQ.

Impact:
-- MCPD crashes, which disrupts both control-plane and data-plane processing while services restart.
-- Inability to configure firewall policy.

Workaround:
Reduce the number of firewall policy rules.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


964489-7 : Protocol Inspection IM package hardening

Links to More Info: K08510472, BT964489


963541-1 : Net-snmp5.8 crash

Links to More Info: BT963541

Component: TMOS

Symptoms:
Snmpd crashes.

Conditions:
This does not always occur, but it may occur after a subagent (bgpd) is disconnected.

Impact:
Snmpd crashes.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


962589-4 : Full Sync Requests Caused By Failed Relayed Call to delete_suggestion

Links to More Info: BT962589

Component: Application Security Manager

Symptoms:
When using parent policies with learning enabled in an auto-sync device group, in some use cases deleting an ignored suggestion on a parent policy will cause a full sync to occur.
This can cause unexpected delays in configuration being synchronized between peers, and in the event of repeated instances in quick succession could fill the /var partition

Conditions:
1) Device Group with ASM and auto-sync enabled
2) Parent Policies with learning are in use.
3) Ignored Suggestions are deleted on the parent policy after they have 0 suggesting children left.

Impact:
ASM configuration requests a full sync which can cause unexpected slowness in config synchronization and may fill the /var partition if done multiple times in quick succession.
A full /var partition can lead to bd cores.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4


961509-5 : ASM blocks WebSocket frames with signature matched but Transparent policy

Links to More Info: BT961509

Component: Application Security Manager

Symptoms:
WebSocket frames receive a close frame

Conditions:
-- ASM provisioned
-- ASM policy attached to a virtual server
-- WebSocket profile attached to a virtual server
-- ASM policy transparent mode enabled

Impact:
WebSocket frame blocked in transparent mode

Workaround:
Change signatures blocking settings to Learn = Yes, Alarm = Yes, Block = No

Fix:
WebSocket frame blocking condition now takes into account global transparent mode setting.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


959985-3 : Update VMware hardware version templates for BIG-IP Virtual Edition (VE) from v10 to v13 in order to support VMs deployed in more versions of vSphere ESXi.

Links to More Info: BT959985

Component: TMOS

Symptoms:
Virtual hardware version setting for BIG-IP VE VMware templates (virtualHW.version) are set to version 10 and must change to version 13, so more versions of vSphere ESXi (for example, ESXi v6.0 and later) can support deploying BIG-IP Virtual Edition.

Conditions:
Using BIG-IP Virtual Edition VMware hardware templates set to v10 running in most, later versions of VMware ESXi.

Impact:
BIG-IP Virtual Edition VMware hardware templates result in performance issues and deployment errors/failures.

Workaround:
None

Fix:
Changed the BIG-IP Virtual Edition VMware hardware template version setting (virtualHW.version) to 13 and deployed them successfully using later versions of VMware ESXi.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


959609-4 : Autodiscd daemon keeps crashing

Links to More Info: BT959609

Component: Advanced Firewall Manager

Symptoms:
Autodiscd daemon keeps crashing.

Conditions:
Issue is happening when high speed logging and auto discovery configuration are configured and send the traffic.

Impact:
Auto discovery feature is not working as expected

Workaround:
None.

Fix:
Auto discovery feature now works as expected.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


957905-1 : SIP Requests / Responses over TCP without content_length header are not aborted by BIG-IP.

Links to More Info: BT957905

Component: Service Provider

Symptoms:
SIP Requests that don't contain a content_length header are accepted and forwarded by the BIG-IP to the server.

SIP Responses that don't contain a content_length header are accepted and forwarded to the client.

The sipmsg parser does not treats the content_length header as a required header as part of the SIP Request / Response.

Conditions:
SIP request / response without content_length header.

Impact:
RFC 6731 non compliance.

Workaround:
N/A

Fix:
BIG-IP now aborts the connection of any TCP SIP request / response that does not contain a content_length header.

content_length header is treated as optional for UDP and SCTP.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


957637-1 : The pfmand daemon can crash when it starts.

Links to More Info: BT957637

Component: TMOS

Symptoms:
The pfmand process crashes and writes out a core file during bootup (or if the process is manually restarted by an Administrator for any reason) on certain platforms.

The crash may happen more than once, until the process finally settles and is able to start correctly.

Conditions:
-- Platforms i4000/i2000/i4800/i2800/i4600/i2600/i850.

Impact:
Network connection lost while pfmand restarts.

Workaround:
None

Fix:
The issue causing the pfmand daemon to occasionally crash has been resolved.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


956013-4 : System reports{{validation_errors}}

Links to More Info: BT956013

Component: Policy Enforcement Manager

Symptoms:
A {{validation_errors}} at Subscriber Management :: Control Plane Listeners and Data Plane Listeners with ipv6 addresses

Conditions:
Specifying an IPv6 address in the expression in Subscriber Management :: Control Plane Listeners and Policy Enforcement :: Data Plane Listeners.

Impact:
Cannot access the BIG-IP GUI through IPv6 address from any web browser. Admin/User cannot enter input through GUI.

Workaround:
None.

Fixed Versions:
16.1.2.1, 15.1.5, 14.1.4.5


955617-8 : Cannot modify properties of a monitor that is already in use by a pool

Links to More Info: BT955617

Component: Local Traffic Manager

Symptoms:
Modifying monitor properties gives error, if it is attached to a pool with Node/Pool member instance.

0107082c:3: Cannot modify the destination address of monitor /Common/my_monitor

Conditions:
-- Monitor with alias address field as default properties.
-- Pool containing a node or pool member.
-- Monitor is attached to the pool.

Impact:
Monitor properties can't be modified if they are in use by a pool.

Workaround:
Remove monitor, modify it, and then add it back.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


954425-4 : Hardening of Live-Update

Links to More Info: K61112120, BT954425


953601-4 : HTTPS monitors marking pool member offline when restrictive ciphers are configured for all TLS protocol versions

Links to More Info: BT953601

Component: Local Traffic Manager

Symptoms:
HTTPS monitor marks pool member/nodes as down and they remain down until bigd is restarted or the monitor instance is removed and created again.

Conditions:
BIG-IP is configured with restrictive ciphers that are only compatible with TLS 1.2 (ECDH+AESGCM) but all of the TLS protocol versions are allowed. When HTTPS monitor TLS 1.0 handshake fails, due to incompatible ciphers with the server being monitored. It does not try TLS 1.2 version and marks pool members or nodes as down.

Impact:
HTTPS monitor shows pool members or nodes down when they are up.

Workaround:
Restart bigd or remove and add monitors.

Fix:
In case of handshake failure, BIG-IP will try TLS 1.2 version.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


951257-5 : FTP active data channels are not established

Links to More Info: K82034427, BT951257


951133-4 : Live Update does not work properly after upgrade

Links to More Info: BT951133

Component: Application Security Manager

Symptoms:
After upgrading BIG-IP version the Live Update "Check for Update" button does not respond.

Conditions:
Upgrading from a version that did not have Live Update to a new version which includes Live Update

Impact:
Live Update can't query for new updates.

Workaround:
Restart tomcat process:
> bigstart restart tomcat

Fixed Versions:
17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.4


950149 : Add configuration to ccmode for compliance with the Common Criteria STIP PPM.

Links to More Info: BT950149

Component: TMOS

Symptoms:
To comply with configuration requirements for the Common Criteria STIP PPM, the ccmode script must be updated.

Conditions:
Required compliance with Common Criteria STIP PPM configuration.

Impact:
Without these updates, the BIG-IP will not be compliant with the Common Criteria STIP requirements.

Workaround:
Follow the instructions in the Common Criteria Guidance document.

Fix:
This fix added configuration elements for compliance to Common Criteria STIP PPM requirements.

Fixed Versions:
17.0.0, 16.1.3


950069-1 : Zonerunner can't edit TXT records containing a + symbol - "Resolver returned no such record"

Links to More Info: BT950069

Component: Global Traffic Manager (DNS)

Symptoms:
When attempting to use zonerunner to edit a TXT record that contains a plus character, BIG-IP DNS presents the error message 'Resolver returned no such record'.

Conditions:
A TXT record exists with RDATA (the value of the TXT record) containing one or more + symbols

Impact:
Unable to edit the record.

Workaround:
Two workarounds available:

1. Use zonerunner to delete the record and then recreate it with the desired RDATA value

2. Manually edit the bind zone file (see K7032)

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1


948985-3 : Workaround to address Nitrox 3 compression engine hang

Links to More Info: BT948985

Component: Local Traffic Manager

Symptoms:
Occasionally the Nitrox3 compression engine hangs.

In /var/log/ltm:
 
crit tmm[12404]: 01010025:2: Device error: n3-compress0 Nitrox 3, Hang Detected: compression device was reset (pci 02:00.1, discarded 1).
crit tmm[12404]: 01010025:2: Device error: n3-compress0 Zip engine ctx eviction (comp_code=0): ctx dropped.

Conditions:
The BIG-IP system uses Nitrox 3 hardware compression chips: 5xxx, 7xxx, 12250, and B2250.

You can check if your platform has nitrox3 by running the following command:

tmctl -w 200 compress -s provider

provider
--------
bzip2
lzo
nitrox3 <--------
zlib

Impact:
The Nitrox3 hardware compression system becomes unavailable, and the compression mode switches to software compression. This can lead to high CPU usage.

Workaround:
Disable HTTP compression or use software compression.

Fix:
Added db key compression.nitrox3.dispatchsize to control the request size.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1


948241-4 : Count Stateful anomalies based only on Device ID

Links to More Info: BT948241

Component: Application Security Manager

Symptoms:
Currently when Device ID is enabled, the BIG-IP system counts stateful anomalies on both IP and Device ID. When a client has a proxy (without XFF), and many requests arrive with the same IP, this can cause false positives

Conditions:
- Bot Defense profile is attached to a virtual server.
- Bot Defense profile has "Browser Verification" set to "Verify After Access" or "Device ID Mode" set to "Generate After Access".

Impact:
False positives may occur in case of a proxy without XFF

Workaround:
None

Fix:
Stateful anomalies are no longer counted on IP when Device ID is enabled

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


948113-1 : User-defined report scheduling fails

Links to More Info: BT948113

Component: Application Visibility and Reporting

Symptoms:
A scheduled report fails to be sent.

An error message with the following format may appear on /var/log/avr/monpd.log file (some parts of the error message were replaced with '.....' in here to leave only the common parts):
     DB|ERROR|....... Error (err-code 1054) executing SQL string :
.....
.....
.....
 Because : Unknown column ....... in 'order clause'

Conditions:
1. Using predefined-report in scheduled-report.
2. Predefined-report has more than one measure.
3. Sort-by value is different from the first measure on predefined-report

Impact:
Internal error for AVR report for ASM pre-defined.

Workaround:
First, remount /usr to read-write:
mount -o remount,rw /usr

Next, open file /usr/share/perl5/vendor_perl/F5/AVReporter/Client.pm and change the following line:
push(@measures,@{$base_request->{measures}}[0]);
to this:
push(@measures,@{$base_request->{sort_by}}[0]->{measure});

The above can be achieved with the following script-line (please first backup the Client.pm file and then verify it changed it correctly):
sed -i 's/push(@measures,@{\$base_request->{measures}}\[0\])/push(@measures,@{$base_request->{sort_by}}[0]->{measure})/' /usr/share/perl5/vendor_perl/F5/AVReporter/Client.pm

Lastly, remount /usr back to read-only:
mount -o remount,ro /usr

Fix:
Using 'sort-by' measure when building PDF (instead of the first value on measure-list)

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


947905-4 : Upgrade from 13.1.4, 14.1.4, or 15.1.1 to 14.0.x, 15.0.x, 16.0.0 or 16.0.0.1 fails

Links to More Info: BT947905

Component: TMOS

Symptoms:
Loading configuration process fails after an upgrade from 13.1.4, 14.1.4, or 15.1.1 to release 14.0.0, 15.0.0, 16.0.0 or 16.0.0.1.

The system posts errors similar to the following:

-- info tmsh[xxxx]: cli schema (15.1.1) has been loaded from schema data files.
-- crit tmsh[xxxx]: 01420001:2: Can't load keyword definition (user-account.session_limit) : framework/SchemaCmd.cpp, line 825.
-- crit tmsh[xxxx]: 01420001:2: Can't load keyword definition (system-settings.ssh_max_session_limit) : framework/SchemaCmd.cpp, line 825
-- emerg load_config_files[xxxx]: "/usr/bin/tmsh -n -g -a load sys config partitions all base " - failed. -- Loading schema version: 15.1.1.
-- err mcpd[xxxx]: 01070422:3: Base configuration load failed.
-- Unexpected Error: "Can't load keyword definition (user-account.session_limit)".
-- Unexpected Error: "Can't load keyword definition (system-settings.ssh_max_session_limit)"
-- Syntax Error:(/config/bigip_user.conf at line: 10) "session-limit" unknown property

Conditions:
Upgrade from one of the following release:

-- v13.1.4 or later within the v13.1.x branch
-- v14.1.4 or later within the v14.1.x branch
-- v15.1.1 or later within the v15.1.x branch

to one of the following releases:

-- v14.0 through v14.1.3.1
-- v15.0 through v15.1.0.5
-- v16.0.0 and v16.0.0.1

Impact:
After upgrade, config does not load. The system hangs at the base configuration load failure status.

Workaround:
Although there is no workaround, you can avoid this issue by upgrading to the most recent maintenance or point release in v14.1.x, v15.1.x, or v16.x.

You can find a list of most current software releases in K5903: BIG-IP software support policy :: https://support.f5.com/csp/article/K5903

Fixed Versions:
16.1.3, 16.0.1


947341-4 : MySQL generates multiple error 24 (too many files open) for PRX.REQUEST_LOG DB tables files.

Links to More Info: BT947341

Component: Application Security Manager

Symptoms:
1) var/lib/mysql/mysqld.err is filled with log entries that contain:
------------
  200824 11:04:43 [ERROR] mysqld: Can't open file: './PRX/REQUEST_LOG.frm' (errno: 24)
  200824 11:18:46 [ERROR] mysqld: Can't open file: './PRX/REQUEST_LOG.frm' (errno: 24)
  200824 11:35:58 [ERROR] mysqld: Can't open file: './PRX/REQUEST_LOG.frm' (errno: 24)
------------

2) There are a lot of PRX.REQUEST_LOG partitions, in some cases up to 1024, many of which are empty.

Conditions:
ASM/AVR provisioned

Impact:
MySQL runs out of resources when opening the file
PRX.REQUEST_LOG and an error message states the file is corrupt.

Workaround:
1. If the /appdata partition is filled to 100% and MySQL restarts continuously, refer to the following Knowledge Articles:
   https://support.f5.com/csp/article/K14956
   https://support.f5.com/csp/article/K42497314

2. To identify the empty partitions, look into:
   mysql -su root -p$(perl -MPassCrypt -nle 'print PassCrypt::decrypt_password($_)' /var/db/mysqlpw) -e "SELECT * FROM INFORMATION_SCHEMA.PARTITIONS WHERE table_name = 'REQUEST_LOG' AND table_schema = 'PRX'\G"

3. For every partition that is empty, manually (or via shell script) execute this sql:
   mysql -su root -p$(perl -MPassCrypt -nle 'print PassCrypt::decrypt_password($_)' /var/db/mysqlpw) -e "ALTER TABLE PRX.REQUEST_LOG DROP PARTITION <empty_partition_name>;"

   Note: <empty_partition_name> must be substituted with the partition name, for example p100001.


4. Increase 'open_files_limit' to '10000'.
--------------------------------

   In the /etc/my.cnf file:
   1. Change the value of the 'open_files_limit' parameter to 10000.
   2. Restart MySQL:
   bigstart restart mysql
--------------------------------

5. pkill asmlogd

Note: This workaround does not survive upgrade. It must be reapplied after every upgrade until the upgraded version contains a fix.

Fix:
This release increases the default 'open_files_limit' to '10000'.

Fixed Versions:
17.0.0, 16.1.2, 16.0.1.2, 15.1.3, 14.1.4.1


947333-2 : Irrelevant content profile diffs in Policy Diff

Links to More Info: BT947333

Component: Application Security Manager

Symptoms:
Defense attributes' grayed out values are shown in the policy diff even if "any" is selected

Conditions:
-- Import a policy
-- Perform a policy diff

Impact:
Policy diff showing irrelevant diffs

Workaround:
None

Fix:
Removed grayed out diffs from policy diff content profile section

Fixed Versions:
17.0.0.1, 16.1.3.1


946325-7 : PEM subscriber GUI hardening

Links to More Info: K25451853, BT946325


946185-3 : Unable to view iApp component due to error 'An error has occurred while trying to process your request.'

Links to More Info: BT946185

Component: TMOS

Symptoms:
When accessing the iApp Components tab, the system presents an error similar to the following:

An error has occurred while trying to process your request.

Conditions:
-- With or without Partitions configured.
-- Navigate to GUI iApps :: Application Services : Applications, to view a custom iApp.
-- More likely to occur after upgrade.

Impact:
Unable to view/modify iApps via GUI iApps :: Application Services : Applications screen.

Workaround:
To reconfigure the iApp, do the following:

1. Navigate to the following location in the GUI:
Local Traffic :: Virtual Server List

2. Click the Application Link :: Reconfigure.

Note: Although this allows you to reconfigure an iApp, it does not provide access to the iApp application details Components page.

Fix:
Viewing Application Service components now reports no errors in the GUI under these conditions.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4


945853-4 : Tmm crash when multiple virtual servers are created, modified, or deleted in quick succession

Links to More Info: BT945853

Component: Advanced Firewall Manager

Symptoms:
TMM crashes during a configuration change.

Conditions:
This occurs under the following conditions:

-- Create/modify/delete multiple virtual servers in quick succession.

-- Perform back-to-back config loads / UCS loads containing a large number of virtual server configurations.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.

Fix:
TMM no longer crashes during a configuration change.

Fixed Versions:
16.1.3, 15.1.3


945357 : BIG-IP must be able to set CA=True when creating Certificate Signing Requests from TMSH.

Links to More Info: BT945357

Component: Local Traffic Manager

Symptoms:
A Certificate Signing Request (CSR) is generated on the BIG-IP device to be used to create a certificate. It is possible for the entity owning the just-created certificate to serve as a Certificate Authority (CA) and be able to issue certificates and private keys to other parties. However, that ability does not exist unless the certificate has the CA field set to True (by default it is set to False).

Conditions:
In the TMSH prompt on the Command Line Interface (CLI), an attempt is made to generate a Certificate Signing Request (CSR) to be used to eventually create a certificate and corresponding private key.

Impact:
Without this change, certificates and private keys generated on the BIG-IP device cannot be directly provided to certification authorities so they can be used to sign certificates they would issue to other parties.

Workaround:
This is a new facility, not provided before, and overcomes a limitation. Without this facility, existing users of the BIG-IP are not impacted at all. As such, there is no workaround applicable.

Fix:
This fix enables certificates and private keys generated on the BIG-IP device via CSR's to be directly provided to certification authorities for their use. Because the CA field is set to now True, this fix adds convenience for certification authorities.

Fixed Versions:
17.0.0, 16.1.3


944381-2 : Dynamic CRL checking for client certificate is not working when TLS1.3 is used.

Links to More Info: BT944381

Component: Local Traffic Manager

Symptoms:
In SSL reverse proxy, dynamic CRL checking for client certificate is not working when TLS 1.3 handshake is used.
The SSL handshake successfully completed even though the client certificate is revoked.

Conditions:
-- Dynamic CRL checking enabled on a client-ssl profile
-- The client-side SSL handshake uses TLS1.3.

Impact:
The handshake should fail but complete successfully

Fix:
The issue was due to Dynamic CRL revocation check has not been integrated to TLS 1.3.

After the Dynamic CRL checking is integrated to TLS 1.3, the TLS handshake will work as expected.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1


944121-4 : Missing SNI information when using non-default domain https monitor running in TMM mode.

Links to More Info: BT944121

Component: In-tmm monitors

Symptoms:
In-TMM https monitors do not send the SNI (Server Name Indication) information for non-default route domain pool members.

In-TMM monitors do not send any packet when TLS1.3 monitor is used.

Conditions:
-- SNI is configured in serverssl profile
-- serverssl profile is assigned to in-tmm https monitors
-- https monitors are monitoring pool members that are in a non-default route domain.

 - Another Condition :

TLS1.3 Monitor is used

Impact:
The TLS connection might fail in case of SNI

No SYN packet is sent in case of TLS1.3 monitor

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


943669-4 : B4450 blade reboot

Links to More Info: BT943669

Component: TMOS

Symptoms:
In a rare scenario, a B4450 blade suddenly reboots.

Conditions:
This occurs when there is heavy traffic load on VIPRION B4450 blades. The root cause is unknown. It happens extremely rarely.

Impact:
Traffic disrupted while the blade reboots.

Workaround:
None.

Fix:
The system now monitors the pause frames and reboots when needed.

Fixed Versions:
16.1.2.2, 15.1.2


943577-1 : Full sync failure for traffic-matching-criteria with port list under certain conditions

Links to More Info: BT943577

Component: TMOS

Symptoms:
Performing a full configuration sync with traffic-matching-criteria (TMC) under specific conditions fails with errors similar to:

err mcpd[6489]: 01070710:3: Database error (13), Cannot update_indexes/checkpoint DB object, class:traffic_matching_criteria_port_update status:13 - EdbCfgObj.cpp, line 127.
err mcpd[6489]: 01071488:3: Remote transaction for device group /Common/Failover to commit id 245 6869100131892804717 /Common/tmc-sync-2-bigip1.test 0 failed with error 01070710:3: Database error (13), Cannot update_indexes/checkpoint DB object, class:traffic_matching_criteria_port_update status:13 - EdbCfgObj.cpp, line 127..

Conditions:
This may occur on a full-load config sync (not an incremental sync)
On the device receiving the ConfigSync:
   - a traffic-matching-criteria is attached to a virtual server
   - the traffic-matching-criteria is using a port-list
On the device sourcing the ConfigSync:
   - the same traffic-matching-criteria is attached to the same virtual server
   - the original port-list is modified (e.g. a description is changed)
   - the TMC is changed to reference a _different_ port-list

Impact:
Unable to sync configurations.

Workaround:
Copy the "net port-list" and "ltm traffic-matching-criteria" objects from the source to target system, merge them with "tmsh load sys config merge", and then perform a force-full-load-push sync from source to target.

If the BIG-IP systems are using device groups with auto-sync enabled, disable auto-sync temporarily while performing this workaround.

1. On the source system (the system whose configuration you want to sync to peer), save the configuration and extract the ltm traffic-matching-criteria and port-lists:

tmsh save sys config

(shopt -s nullglob; echo "#"; echo "# $HOSTNAME"; echo "# generated $(date +"%F %T %z")"
    cat /config{/partitions/*,}/bigip{_base,}.conf |
    awk '
        BEGIN { p=0 }
        /^(ltm traffic-matching-criteria|net port-list) / { p=1 }
        /^}/ { if (p) { p=0; print } }
        { if (p) print; }
    ' ) > /var/tmp/portlists-and-tmcs.txt

2. Copy /var/tmp/portlists-and-tmcs.txt to the target system

3. On the target system, load that file:

    tmsh load sys config replace file /var/tmp/portlists-and-tmcs.txt

3a. If loading the config file on the target system fails with the same error message seen during a ConfigSync, follow the procedure in
K13030: Forcing the mcpd process to reload the BIG-IP configuration :: https://support.f5.com/csp/article/K13030.

   tmsh save sys config
   clsh touch /service/mcpd/forceload
   clsh reboot

4. On the source system, force a full-load sync to the device-group:

    tmsh run cm config-sync force-full-load-push to-group <name of sync-group>

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


943109-4 : Mcpd crash when bulk deleting Bot Defense profiles

Links to More Info: BT943109

Component: TMOS

Symptoms:
When bulk deleting a large number of Bot Defense profiles (around 450 profiles) using TMSH, mcpd could crash.

Conditions:
This can be encountered during bulk delete of Bot Defenese profiles via tmsh.

Impact:
Crash of mcpd causing failover.

Workaround:
Delete the Bot Defense profiles in smaller batches to avoid the possible crash.

Fix:
There is no longer a crash of mcpd when deleting a large number of Bot Defense in a bulk using TMSH.

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.5


941649-8 : Local File Inclusion Vulnerability

Links to More Info: K63163637, BT941649


941625-3 : BD sometimes encounters errors related to TS cookie building

Links to More Info: BT941625

Component: Application Security Manager

Symptoms:
BD sometimes print errors related to TS cookie building when receiving ASM cookies with account_id:

-- BEM|ERR |May 19 17:49:55.800|0983|response_header_accumulator.c:0200|Error: CookieMgrBuildCookie failed. ans 1 job 2957561040.

-- IO_PLUGIN|ERR |May 19 17:49:55.800|0983|io_plugin.c:3320|TMEVT_RESPONSE: Cannot build a ts cookie.

Conditions:
-- Cookie protection is enabled.
-- The BIG-IP software is upgraded from a version that was earlier than 15.1.x.

Impact:
The cookie is not built and an error is logged.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4


940317-9 : CVE-2020-13692: PostgreSQL JDBC Driver vulnerability

Links to More Info: K23157312, BT940317


940261-1 : Support IPS package downloads via HTTP proxy.

Links to More Info: BT940261

Component: Protocol Inspection

Symptoms:
IPS package download via HTTP proxy does not work.

2021-08-31 16:59:59,793 WARNING Download file failed. Retrying.
--
The error repeats continuously.

Conditions:
-- The global db key 'sys management-proxy-config' is configured
-- An IPS download is triggered

Impact:
The IPS IM package fails to download.

Workaround:
No workaround.

Fix:
IPS package downloads can now be successfully performed through an HTTP proxy.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


940225-4 : Not able to add more than 6 NICs on VE running in Azure

Links to More Info: BT940225

Component: TMOS

Symptoms:
Azure BIG-IP Virtual Edition (VE) with more than 6 NICs fails to boot.

Conditions:
-- Standard_DS4_v2 Azure instance type.
-- Mellanox ConnectX-3 ethernet controller.
-- A greater-than-2-NIC template is used, for example https://github.com/F5Networks/f5-azure-arm-templates/tree/master/supported/standalone/n-nic/existing-stack/byol with "numberOfAdditionalNics" set.
-- Accelerated networking is enabled on two or more NICs.

Impact:
Not able to boot BIG-IP VM with 8 NICs, which should be supported for Standard_DS4_v2 instance type:
8 vCPU
28 GiB
8 Max NICs

Adding more NICs to the instance makes the device fail to boot.

Workaround:
None

Fixed Versions:
17.0.0.1, 16.1.3, 15.1.6.1, 14.1.5.1


940185-7 : icrd_child may consume excessive resources while processing REST requests

Links to More Info: K11742742, BT940185


939877-3 : OAuth refresh token not found

Links to More Info: BT939877

Component: Access Policy Manager

Symptoms:
When an OAuth client sends a refresh token to renew the access token, BIG-IP reports an error:

err tmm[13354]: 01990004:3: /Common/my_OAuth_v1:Common: Request Refresh Token from Source ID ... failed. Error Code (id_not_found) Error Description (The refresh token is not found)

Conditions:
-- The refresh token expiration interval is longer than authcode and accesstoken.
-- The Authorization code table entry does not exist because of an internal clearing/purging operation.
-- tmm restarts or failover to standby thus losing refresh-token value from primarydb

Impact:
OAuth APM client end user fails to renew the access token even with a valid refresh token.

Workaround:
Clear/reset the Authorization code column value manually:

As a root user run below BIG-IP shell
(tmos)# list apm oauth db-instance
apm oauth db-instance oauthdb { db-name <db_name> description "Default OAuth DB." }

Copy the value corresponding to <db_name>.

Log into mysql from the bash prompt:
# mysql -u root -p$(perl -MPassCrypt -nle 'print PassCrypt::decrypt_password($_)' /var/db/mysqlpw)

mysql> use <db_name>;

mysql> update master set auth_code = NULL where refresh_token='affected_refresh_token_id';

(Substitute the affected refresh token ID with affected_refresh_token_id in the previous command.)

Fix:
Do not report error if the Authorization code does not exist when a valid refresh-token/access-token exists.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4, 14.1.4.4


936501-1 : Scp to /var/local/ucs or /var/local/scf is not allowed when fips140 or common criteria mode is enabled

Links to More Info: BT936501

Component: TMOS

Symptoms:
When attempting to Export/Import a file from the BIG-IP file path(s) /var/local/ucs or /var/local/scf via SCP, you receive an error dialog:

"file not allowed"

Conditions:
-- fips140 or common criteria mode enabled
-- Export/Import file from the BIG-IP file path(s) /var/local/ucs or /var/local/scf

Impact:
Import/Export file using scp tool from/to the BIG-IP file path(s) /var/local/ucs or /var/local/scf not allowed when fips140 or cc mode enabled even if the file is encrypted.

Workaround:
None

Fixed Versions:
16.1.3.1


936441-7 : Nitrox5 SDK driver logging messages

Links to More Info: BT936441

Component: Local Traffic Manager

Symptoms:
The system kernel started spontaneously logging messages at an extremely high rate (~3000 per second):

Warning kernel: EMU(3)_INT: 0x0000000000000020
warning kernel: sum_sbe: 0
warning kernel: sum_dbe: 0
warning kernel: sum_wd: 0
warning kernel: sum_gi: 0
warning kernel: sum_ge: 0
warning kernel: sum_uc: 1

The above set of messages seems to be logged at about 2900-3000 times a second.

These messages continue after TMM fails its heartbeat and is killed. The system is rebooted by the host watchdog.

Conditions:
These messages are triggered by Nitrox5 driver when EMU microcode cache errors corrected by hardware.

Impact:
High rate of logging messages. The tmm heartbeat eventually fails, and tmm is restarted. Traffic disrupted while tmm restarts.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5


935249-3 : GTM virtual servers have the wrong status

Links to More Info: BT935249

Component: Global Traffic Manager (DNS)

Symptoms:
GTM virtual servers have the wrong status (up when they should be down, or down when they should be up).

Conditions:
-- The GTM virtual servers are monitored with an HTTP or HTTPS monitor that performs HTTP status matching.

-- The status code (for example, 200) being searched for in the response appears elsewhere than in the first line (for example, in a following header).

Impact:
The system incorrectly matches the status code in a response line which is not the Status-Line. As a result, the availability status reported for a virtual server may be incorrect. This may cause the GTM system to send traffic to unsuitable resources causing application disruptions.

Workaround:
You can work around this issue by not performing HTTP status matching in your HTTP/HTTPS GTM monitors.

Fix:
The HTTP status code is now correctly searched only in the first line of the response.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5


935177-3 : IPsec: Changing MTU or PMTU settings on interface mode tunnel cores tmm

Links to More Info: BT935177

Component: TMOS

Symptoms:
TMM crashes when the maximum transmission unit (MTU) or 'Use PMTU' setting is changed while passing IPsec traffic.

Conditions:
-- IPsec tunnel configured and passing traffic.
-- The MTU or 'Use PMTU' setting for the IPsec tunnel (in interface mode) is changed.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Do not change MTU or PMTU settings for the tunnel while it is passing traffic.

The settings can be changed while passing traffic, but TMM may crash very soon after the change. If the settings are changed and TMM does not crash soon after, then it will not spontaneously crash at some later point.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


934697-5 : Route domain not reachable (strict mode)

Links to More Info: BT934697

Component: Local Traffic Manager

Symptoms:
Network flows are reset and errors are found in /var/log/ltm:

Route domain not reachable (strict mode).

Conditions:
This might happen in either of the following scenarios:
Scenario 1
==========
-- LTM with iRules configured.
-- The iRule directs traffic to a node that is in a route domain.

Scenario 2
==========
-- LTM with an LTM policy configured.
-- The policy directs traffic to a node that is in a route domain.

Impact:
Traffic is not sent to the node that is in a route domain.

The iRule 'node' method and/or LTM policy 'node' specification require a route_domain to be specified in order for the traffic to be sent to a node that is assigned to a route domain.

Workaround:
Specify the node along with Route domain ID.

-- For iRules, change from this:
when HTTP_REQUEST {
 node 10.10.10.10 80
}

To this (assuming route domain 1):
when HTTP_REQUEST {
 node 10.10.10.10%1 80
}


-- For LTM policies, change from this:
actions {
    0 {
        forward
        select
        node 10.2.35.20
    }
}

To this (assuming route domain 1):
actions {
    0 {
        forward
        select
        node 10.2.35.20%1
    }
}

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.5


932137-7 : AVR data might be restored from non-relevant files in /shared/avr_afm partition during upgrade

Links to More Info: BT932137

Component: Application Visibility and Reporting

Symptoms:
After upgrade, AFM statistics show non-relevant data.

Conditions:
BIG-IP system upgrade
-- Leftovers files remain in /shared/avr_afm partition from other versions.

Impact:
Non-relevant data are shown in AFM statistics.

Workaround:
Delete the non-relevant data manually from MariaDB/MySQL.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4, 13.1.5


932133-1 : Payloads with large number of elements in XML take a lot of time to process

Links to More Info: BT932133

Component: Application Security Manager

Symptoms:
ASM experiences high CPU and latency usage while processing a large XML request.

Conditions:
-- ASM provisioned
-- HTTP request with a large XML payload (several MB) is sent to the backend server which triggers the XML parser.

Impact:
High CPU and latency occurs while bd processes the payload. This may cause a bottleneck for different requests that arrive concurrently with the large XML payload request.

Workaround:
None

Fix:
This fix includes performance improvements for large XML payloads.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4, 13.1.5


929909-3 : TCP Packets are not dropped in IP Intelligence

Links to More Info: BT929909

Component: Advanced Firewall Manager

Symptoms:
When an IP address is added to IP Intelligence under Denial-Of_service Category at a global level, and a TCP flood with that IP address occurs, IP Intelligence does not drop those packets

Conditions:
TCP traffic on BIG-IP with IP Intelligence enabled and provisioned

Impact:
When adding an IP address to an IP Intelligence category, UDP traffic from that IP address is dropped, but TCP traffic is not dropped.

Fix:
When adding an IP address to an IP Intelligence category, both TCP and UDP traffic from that IP address is dropped.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


929213-2 : iAppLX packages not rolled forward after BIG-IP upgrade

Links to More Info: BT929213

Component: Device Management

Symptoms:
Certain iAppLX packages are not rolled forward after a BIG-IP upgrade or restoring a UCS file generated from an affected system, and will be unavailable for use.

1. f5-cloud-failover-1.4.0-0.noarch.rpm
2. f5-service-discovery-1.2.9-2.noarch.rpm
3. f5-telemetry-1.12.0-3.noarch.rpm

Conditions:
-> Installing any of the below iAppLX packages
1. f5-cloud-failover-1.4.0-0.noarch.rpm
2. f5-service-discovery-1.2.9-2.noarch.rpm
3. f5-telemetry-1.12.0-3.noarch.rpm

-> Performing an upgrade

-> Trying to access the LX packages from GUI by navigating to iApps -> Package Management LX

Impact:
After upgrading or restoring a UCS file generated from an affected system, the cloud-failover, service discovery, and telemetry iAppLX apps are not available for use, and will result in 404 error, while accessing them from GUI

Workaround:
The package needs to be uninstalled and installed again for use.

Steps:
-> From GUI, Navigate to iApps -> Package Management LX
-> select the package to uninstall and click on Uninstall
-> click on Import and provide the path of package to install again

Fix:
A new database key has been added, 'sys db iapplxrpm.timeout', which allows the RPM build timeout value to be increased.

sys db iapplxrpm.timeout {
    default-value "60"
    scf-config "true"
    value "60"
    value-range "integer min:30 max:600"
}

For example:

tmsh modify sys db iapplxrpm.timeout value 300

tmsh restart sys service restjavad

Increasing the db key and restarting restjavad should not be traffic impacting.

After increasing the timeout, the RPM build process that runs during a UCS save should be successful, and the resulting UCS should include the iAppsLX packages as expected.

Note: The maximum db key value of 600 may be needed in some cases.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4


926845-7 : Inactive ASM policies are deleted upon upgrade

Links to More Info: BT926845

Component: Application Security Manager

Symptoms:
Upon upgrade, active ASM policies are preserved, and inactive policies are deleted.

Conditions:
-- Configuration contains active and inactive ASM policies.
-- Upgrade the BIG-IP system to any later version.
-- You can check existing ASM policies in tmsh:
tmsh list asm policy

Impact:
Only the active ASM policies are preserved; the inactive policies are deleted.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


926341-5 : RtIntervalSecs parameter in /etc/avr/avrd.cfg file is reset on version upgrade

Links to More Info: BT926341

Component: Application Visibility and Reporting

Symptoms:
Unusually high AVR CPU utilization occurs following an upgrade.

Conditions:
-- BIG-IP software upgrade to v13.0.x or later.
-- Running AVR.

Impact:
AVR CPU utilization can be unusually high for an unusually long period of time.

Workaround:
After upgrade manually edit /etc/avr/avrd.cfg to decrease AVR CPU usage is high by increasing the time period of real-time statistics collection. In order to do so:
1. Change value of RtIntervalSecs in /etc/avr/avrd.cfg file to 30 or 60 seconds.
2. Restart the system by running the following command at the command prompt:
bigstart restart.

When changing RtIntervalSecs please take into consideration two important limitations:
-- Value of RtIntervalSecs cannot be less than 10.
-- Value of RtIntervalSecs must be 10 on BIG-IP devices that are registered on BIG-IQ DCD nodes.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.4, 14.1.4.4, 13.1.5


924945-5 : Fail to detach HTTP profile from virtual server

Links to More Info: BT924945

Component: Application Visibility and Reporting

Symptoms:
The virtual server might stay attached to the initial HTTP profile.

Conditions:
Attaching new HTTP profiles or just detaching an existing one.

Impact:
The virtual server stays attached to the former HTTP profile, meaning that the virtual server might be attached to a different HTTP profile than what the GUI displays. Configuration changes to the HTTP profile the GUI shows as attached are not reflected in the virtual server. For example, the new HTTP profile might enable XFF, but if the former attached profile does not enable it, the virtual server does not accept XFF.

Workaround:
Create new similar virtual server and attach it to the correct HTTP profile.

Fixed Versions:
17.0.0, 16.1.1, 16.0.1.2, 15.1.3


923221-8 : BD does not use all the CPU cores

Links to More Info: BT923221

Component: Application Security Manager

Symptoms:
Not all CPUs are utilized. The CPUs that are not loaded are those with ID greater than 31.

Conditions:
BIG-IP software is installed on a device with more than 32 cores.

Impact:
ASM does not use all of the available CPU cores.

Workaround:
Run the following commands from bash shell.

1. # mount -o remount,rw /usr

2. Modify the following file on the BIG-IP system:
   /usr/local/share/perl5/F5/ProcessHandler.pm
   
   Important: Make a backup of the file before editing.

3. Change this:
  ALL_CPUS_AFFINITY => '0xFFFFFFFF',

   To this:
  ALL_CPUS_AFFINITY => '0xFFFFFFFFFFFF',

4. # mount -o remount,ro /usr

5. Restart the asm process:
   # bigstart restart asm.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


922413-8 : Excessive memory consumption with ntlmconnpool configured

Links to More Info: BT922413

Component: Local Traffic Manager

Symptoms:
OneConnect allows load balancing of HTTP requests from the same client connection over a pool of server side connections. When NTLM authentication is used, the NTLM Conn Pool allows reuse of server-side connections for authenticated client side connections. It holds HTTP authentication headers which is no longer necessary once a client is authenticated.

Conditions:
-- The virtual server is configured with both OneConnect and NTLM Conn Pool profiles.
-- A large number of client systems with NTLM authentication are load balanced via the virtual server with long-lived connections.

Impact:
The BIG-IP system experiences memory pressure, which may result in an out-of-memory condition and a process crash, and potentially cause failover and interruption of traffic processing.

Workaround:
None.

Fix:
When an NTLM Conn Pool profile is attached to a virtual server, it no longer causes memory pressure on a large number connections with NTLM authentication.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


922185-3 : LDAP referrals not supported for 'cert-ldap system-auth'

Links to More Info: BT922185

Component: TMOS

Symptoms:
Admin users are unable to log in.

Conditions:
-- Remote LDAP auth enabled.
-- Administrative users are authenticated with the 'cert-ldap' source.
-- The admin user tries to log in.

Impact:
The cert-ldap authentication does not work, so login fails.

Workaround:
Manually edit the /etc/nslcd.conf and set the referrals to no.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


922105-1 : Avrd core when connection to BIG-IQ data collection device is not available

Links to More Info: BT922105

Component: Application Visibility and Reporting

Symptoms:
When a BIG-IP system is configured to work with BIG-IQ but cannot connect due to network problems, avrd restarts itself every 10 minutes. During such restarts, a core is sometimes generated.

Conditions:
BIG-IP system is registered on BIG-IQ, but there is no network connectivity for any number of reasons.

Impact:
No impact since there is no network connectivity with BIG-IQ, and the data from the BIG-IP system cannot be sent anywhere.

Workaround:
Attempts to connect to BIG-IQ can be disabled manually by the following command:

tmsh modify analytics global-settings use-offbox disabled

Fix:
Avrd no longer cores when the connection to the BIG-IQ data collection device is not available.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4, 13.1.5


921697-1 : Attack signature updates fail to install with Installation Error.

Links to More Info: BT921697

Component: Application Security Manager

Symptoms:
Installing a new Attack Signature Update (ASU) file on ASM/AWAF device that has large number of active policies can result in a failure due to memory exceptions. The following errors can be observed:

/var/log/ts/asm_config_server.log:
F5::ASMConfig::Handler::handle_error,,Code: 406 , Error message = Process size (232341504) has exceeded max size (200000000)

/var/log/asm
crit perl[19751]: 01310027:2: ASM subsystem error (apply_asm_attack_signatures ,F5::LiveUpdate::PayloadHandler::clean_fail): Fail load update files: TSocket: timed out reading 1024 bytes from n.n.n.n:9781

Conditions:
1. Adding and activating a large number of policies on a BIG-IP system configured with ASM/AWAF. It is not known exactly how many policies are required to encounter this, but it appears to be between 50 and 90 where this becomes a risk.

2. Installing a new ASU file

Impact:
The attack signature update fails.

Workaround:
Impact of workaround:
Performing this workaround requires restarting ASM, so it affects traffic processing briefly; therefore, it is recommended that you perform this during a maintenance window.

Increase 'max memory size' from the default ~200 MB (200000000) to 300 MB:

1. Take a backup of the original file.
# cp /etc/ts/tools/asm_config_server.cfg /var/tmp/asm_config_server.original.cfg

2. Add the following to the end of file /etc/ts/tools/asm_config_server.cfg:
# AsyncMaxMemorySize=314572800

3. Restart ASM.
# bigstart restart asm

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1, 14.1.4.6


921441-4 : MR_INGRESS iRules that change diameter messages corrupt diam_msg

Links to More Info: BT921441

Component: Service Provider

Symptoms:
-- 'DIAMETER::host origin' command may not be set correctly.

There are errors in ltm/log:
err tmm[18562]: 014c0001:3: DIAMETER: hud_diam_handle error: Not found

Conditions:
-- Virtual server is configured with a diameter profile enabled with an ingress iRule, for example:

ltm rule Diameter - iRule {
  when MR_INGRESS {
    DIAMETER:: host origin "hostname.realm.example"
  }
}

-- Traffic arrives containing CER and ULR messages.

Impact:
Using the iRule to change the host origin corrupts the diameter message.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


921365-2 : IKE-SA on standby deleted due to re-transmit failure when failing over from active to standby

Links to More Info: BT921365

Component: TMOS

Symptoms:
IKE-SAs are deleted on standby BIG-IP systems after a failover.

Conditions:
-- High availability (HA) environment
-- Dead-peer detection (DPD) / liveness checks are enabled
-- An HA failover occurs

This is a timing issue and can occur intermittently during a normal failover.

Impact:
Some of the IKE-SAs are missing on the standby device. When a failover happens, IPsec traffic will be dropped for those missing SAs.

Workaround:
Set IKE DPD interval time to ZERO (i.e., disable).

Fix:
When the BIG-IP system is in standby mode, the system no longer retries sending IKE/IPSEC control messages, which prevents this issue from occurring.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4


920149-3 : Live Update default factory file for Server Technologies cannot be reinstalled

Links to More Info: BT920149

Component: Application Security Manager

Symptoms:
Live Update default factory file for Server Technologies cannot be reinstalled once it is no longer the currently installed update file.

Conditions:
This occurs:

-- Once another update file for Server Technologies has been installed (most likely, a newer file).
-- If the device has been upgraded from a prior release such that the currently installed Server Technologies file is from the previous release, and is not the default factory file for the current release.

Impact:
Live Update default factory file for Server Technologies cannot be reinstalled.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4.1, 14.1.4.4


919357-8 : iControl REST hardening

Links to More Info: K22505850, BT919357


919301-1 : GTP::ie count does not work with -message option

Links to More Info: BT919301

Component: Service Provider

Symptoms:
The 'GTP::ie count' iRule command does not work with the -message option. The command fails with an error:

wrong # args: should be "-type <ie-path>"

Conditions:
Issue the 'GTP::ie count' command with -message command, for example:

GTP::ie count -message $m -type apn

Impact:
iRules fails and it could cause connection abort.

Workaround:
Swap order of argument by moving -message to the end, for example:

GTP::ie count -type apn -message $m

There is a warning message due to iRules validation, but the command works in runtime.

Fix:
'GTP::ie' count is now working with -message option.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


915981-4 : BIG-IP SCP hardening

Links to More Info: K38271531, BT915981


915773-7 : Restart of TMM after stale interface reference

Links to More Info: BT915773

Component: Local Traffic Manager

Symptoms:
An assert is reported in the logs:
panic: ../net/ifc.c:975: Assertion "ifc ref valid" failed.

Conditions:
The conditions under which this occurs are unknown.

Impact:
Tmm crashes and restarts. Traffic disrupted while tmm restarts.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4


913413-1 : 'GTP::header extension count' iRule command returns 0

Links to More Info: BT913413

Component: Service Provider

Symptoms:
The 'GTP::header extension count' iRule command always returns 0 (zero).

Conditions:
This is encountered when using 'GTP::header extension count' in an iRule.

Impact:
The command returns false information.

Workaround:
None

Fix:
'GTP::header extension count' command now returns number of header extension correctly.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


913409-1 : GTP::header extension command may abort connection due to unreasonable TCL error

Links to More Info: BT913409

Component: Service Provider

Symptoms:
When running "GTP::header extension" iRule command with some conditions, it may cause a TCL error and abort the connection.

Conditions:
Running "GTP::header extension" iRule command is used with some specific arguments and/or specific condition of GTP message

Impact:
TCL error log is shown and connection is aborted

Workaround:
None

Fix:
GTP::header extension command no longer abort connection due to unreasonable TCL error

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


913393-1 : Tmsh help page for GTP iRule contains incorrect and missing information

Links to More Info: BT913393

Component: Service Provider

Symptoms:
In the tmsh help page for the GTP iRule command, it contains incorrect and missing information for GTP::header and GTP::respond command.

Conditions:
When running "tmsh help ltm rule command GTP::header", information regarding GTP::header and GTP::respond iRule command may be incorrect or missing.

Impact:
User may not be able to use related iRule command properly.

Workaround:
None

Fix:
Tmsh help page for GTP iRule is updated

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


913085-6 : Avrd core when avrd process is stopped or restarted

Links to More Info: BT913085

Component: Application Visibility and Reporting

Symptoms:
When the avrd process is stopped or restarted, it fails with core before the exit. A core file with the name starting with SENDER_HTTPS (for example, SENDER_HTTPS.bld0.0.9.core.gz) can be found in /shared/cores/ directory.

Conditions:
A BIG-IP system is registered on BIG-IQ and has established an HTTPS connection with BIG-IQ for sending stats data.

Impact:
Avrd cores while exiting. There is no impact on BIG-IP system functionality.

Workaround:
None.

Fix:
Avrd no longer cores when avrd process is stopped or restarted.

Fixed Versions:
17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.2, 13.1.4.1


912945-3 : A virtual server with multiple client SSL profiles, the profile with CN or SAN of the cert matching the SNI is not selected if cert is ECDSA-signed

Links to More Info: BT912945

Component: Local Traffic Manager

Symptoms:
In a virtual configured with multiple client SSL profiles, the profile with ECDSA-signed cert is not selected even though its CN/SAN matching the SNI extension of ClientHello.

Conditions:
-- A virtual server with multiple client SSL profiles.
-- The SNI of,,lientHello does not match the 'server name' of any profile.
-- The cert in the profile is ECDSA-signed and its CN/SAN matches SNI extension of ClientHello.
-- That profile in is not selected.

Impact:
The incorrect client SSL profile is selected.

Workaround:
Configure the 'Server Name' option in the client SSL profile.

Fix:
Fixed an issue with client SSL profile selection.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4


912517-7 : Database monitor marks pool member down if 'send' is configured but no 'receive' strings are configured

Links to More Info: BT912517

Component: Local Traffic Manager

Symptoms:
If an LTM database monitor type (MySQL, MSSQL, Oracle, or PostgreSQL database monitor type) is configured with a 'send' string but with no 'receive' string to issue a user-specified database query, pool members using this monitor are marked DOWN, even though a connection to the configured database completed successfully.

Conditions:
-- An LTM pool or pool members is configured to use an LTM database (MySQL, MSSQL, Oracle or PostgreSQL) monitor type.
-- A 'send' string is configured for the monitor.
-- A 'receive' string is not configured.

Impact:
The database monitor marks the pool member down, even in cases where the pool member is actually pingable.

Workaround:
To work around this issue, configure 'send' and 'recv' strings for the database monitor that will always succeed when successfully connected to the specified database (with the configured username and password, if applicable).

Fix:
For BIG-IP versions 17.0.0 and earlier, a database monitor no longer marks pool member down if 'send' is configured but no 'receive' strings are configured.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


912253-2 : Non-admin users cannot run show running-config or list sys

Links to More Info: BT912253

Component: TMOS

Symptoms:
Lower-privileged users, for instance guests or operators, are unable to list the configuration in tmsh, and get an error:

Unexpected Error: Can't display all items, can't get object count from mcpd.

The list /sys or list /sys telemd commands trigger the following error:

01070823:3: Read Access Denied: user (oper) type (Telemd configuration).

Conditions:
User account with a role of guest, operator, or any role other than admin.

Impact:
You are unable to show the running config, or use list or list sys commands.

Workaround:
Logon with an account with admin access.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


912149-7 : ASM sync failure with Cgc::Channel error 'Failed to send a message, error:15638476'

Links to More Info: BT912149

Component: Application Security Manager

Symptoms:
The system exhibits various symptoms related to sync and control plane, and reports errors similar to the following:

/var/log/:

asm:
-- (asm_config_server.pl,F5::Cgc::Channel::send): Failed to send a message, error:15638476.

ts_debug.log:
-- |ZEROMQ|May 21 23:27:31.840|24813|25914|25914|epoll.cpp:0060|~epoll_t()|(zmq_assert) Assertion failed: load.get () == 0

Conditions:
-- Two devices in a sync-failover/sync-only device group.
-- Other conditions required to reproduce this issue are under investigation.

Note: The occurrences of the Cgc::Channel message in the /var/log/ and /var/log/ts/asm_config_server logs are the most reliable indicator of this issue.

Impact:
-- Config-sync does not work, resulting in a different configuration among the devices in a sync group.

-- Security log profile changes are not propagated to other devices.

-- Portions of the GUI hang, e.g.: Security module tab, and 'security' menu under virtual server.

-- Policies with learning enabled do not generate learning suggestions.

Workaround:
Restart asm_config_server on the units in the device group.

# pkill -f asm_config_server

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


911585-5 : PEM VE does not send CCRi when receiving multiple subscriber requests in a short interval

Links to More Info: BT911585

Component: Policy Enforcement Manager

Symptoms:
PEM sessions go to a stale state and the Credit Control Request (CCRi) is not sent.

Conditions:
-- PEM is configured and passing normal PEM traffic.
-- Using BIG-IP Virtual Edition (VE)

Impact:
Session is not established.

Workaround:
None.

Fix:
Enhanced application to accept new sessions under problem conditions.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


911141-1 : GTP v1 APN is not decoded/encoded properly

Links to More Info: BT911141

Component: Service Provider

Symptoms:
GTP v1 APN element was decoded/encoded as octetstring and Only GTP v2 APN element is decoded/encoded as DNS encoding.

Conditions:
- GTP version 1.
- APN element.

Impact:
iRules become more complex when dealing with GTP v1 APN element, as it may need to convert between octetstring and dotted style domain name value after decoding or before encoding the data.

Workaround:
Use iRules to convert between octetstring and dotted style domain name values.

Fix:
GTP version 1 APN information element is now decoded/encoded as DNS encoding.

Behavior Change:
GTP v1 apn element is now decoded/encoded using DNS-like encoding. Previously, it was decoded/encoded as octetstring.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


910673-6 : Nethsm-thales-install.sh installation fails with error 'Could not reach Thales HSM'

Links to More Info: BT910673

Component: Local Traffic Manager

Symptoms:
Thales installation script fails with error message.

ERROR: Could not reach Thales HSM "<ip>". Make sure the HSM IP address is correct and that the HSM is accessible to the BIG-IP.

Conditions:
This occurs when the ICMP ping is blocked between the BIG-IP system and netHSM.

Impact:
Thales/nCipher NetHSM client software installation fails.

Workaround:
Unblock ICMP ping between the BIG-IP system and netHSM.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1


910213-7 : LB::down iRule command is ineffective, and can lead to inconsistent pool member status

Links to More Info: BT910213

Component: Local Traffic Manager

Symptoms:
Use of the LB::down command in an iRule may not have the desired effect, or may result in pool members that are down for load balancing, but indicate up/available in the GUI and CLI.

Specifically, the pool member is marked down within the tmm instance executing the iRule, but the status change is not updated to mcpd, or to other tmm instances.

As a result, the message 'Pool /Common/mypool member /Common/1.1.1.1:80 monitor status iRule down' does not appear in the log, and the status of the pool member is not updated when viewed in the GUI or via 'tmsh show ltm pool xxxx members'.

Note: If [event info] is logged in the LB_FAILED event, it will indicate that the load balancing decision failed due to "connection limit"

Conditions:
Using the LB::down command in an iRule.

Impact:
Because mcpd believes the pool member to be up, it does not update tmm's status, so tmm continues to regard it as down indefinitely, or until a monitor state change occurs.

If the LB::down command is used on all members of a pool, the affected tmms cannot load balance to that pool, even though the GUI/tmsh indicate that the pool has available members.

Because pool member status is stored on per-tmm basis and incoming connections are distributed across tmms using a hash, this can lead to apparently inconsistent results, where some traffic (traffic hitting a particular tmm) is rejected with an RST cause of 'No pool member available'.

Workaround:
- Delete and recreate affected pool members
(or) Restart tmm
(or) Restart the BIG-IP.

There is no direct workaround, but the use of an inband monitor instead of the LB::down command may be effective. You must tune the inband monitor's settings to values consistent with the desired behavior.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


909161-1 : A core file is generated upon avrd process restart or stop

Links to More Info: BT909161

Component: Application Visibility and Reporting

Symptoms:
Sometime when avrd process is stopped or restarted, a core is generated.

Conditions:
Avrd process is stopped or restarted.

Impact:
Avrd creates a core file but there is no other negative impact to the system.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


907549-6 : Memory leak in BWC::Measure

Links to More Info: BT907549

Component: TMOS

Symptoms:
Memory leak in BWC calculator.

Conditions:
When the HSL log publisher is attached to the BWC::Measure instance in the Bandwidth policy.

Impact:
A memory leak occurs.

Workaround:
None.

Fix:
Memory is not leaked.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.0.5, 14.1.5


907025-5 : Live update error" 'Try to reload page'

Links to More Info: BT907025

Component: Application Security Manager

Symptoms:
When trying to update Attack Signatures. the following error message is shown:

Could not communicate with system. Try to reload page.

Conditions:
Insufficient disk space to update the Attack Signature.

Impact:
Live Update unable to restore the database during startup. Device runs out of disk space, which leads to failure in writing live update hsqldb log file. The liveupdatedb.script file, which is based on the .log file, is truncated and missing necessary settings in order to initialize the live update database.

Workaround:
This following procedure restores the database to its default, initial state:

1. Remove the sigfile.tmp.* directories under /var/ts/var/tmp.

2. Delete the script:
delete /var/lib/hsqldb/live-update/liveupdatedb.script

3. Create a new script:
create new /var/lib/hsqldb/live-update/liveupdatedb.script.

4. Add the following lines to create the live update database schema and set the SA user as expected:

 CREATE SCHEMA PUBLIC AUTHORIZATION DBA
 CREATE MEMORY TABLE AVAILABILITY(ID VARCHAR(255) NOT NULL,ERRORMESSAGE VARCHAR(255),LASTCHECKDATETIME BIGINT,LASTCHECKUPDATEFILE VARCHAR(255),STATUS VARCHAR(255),"TYPE" VARCHAR(255),CONSTRAINT AVAILABILITY_PK PRIMARY KEY(ID))
 CREATE MEMORY TABLE INSTALLSCHEDULE(ID VARCHAR(255) NOT NULL,APPLYATALLTIMES BOOLEAN,APPLYONALLDAYS BOOLEAN,APPLYONFRIDAYS BOOLEAN,APPLYONMONDAYS BOOLEAN,APPLYONSATURDAYS BOOLEAN,APPLYONSUNDAYS BOOLEAN,APPLYONTHURSDAYS BOOLEAN,APPLYONTUESDAYS BOOLEAN,APPLYONWEDNESDAYS BOOLEAN,ENDTIME VARCHAR(255),FREQUENCY VARCHAR(255),STARTTIME VARCHAR(255),"TYPE" VARCHAR(255),CONSTRAINT INSTALLSCHEDULE_PK PRIMARY KEY(ID))
 CREATE MEMORY TABLE UPDATEFILE(ID VARCHAR(255) NOT NULL,CREATEDATETIME BIGINT,FILELOCATION VARCHAR(255),FILENAME VARCHAR(255),ISFILEAVAILABLE BOOLEAN,ISFILEMANUALLYUPLOADED BOOLEAN,ISGENESIS BOOLEAN,MD5 VARCHAR(255),"TYPE" VARCHAR(255),CONSTRAINT UPDATEFILE_PK PRIMARY KEY(ID))
 CREATE MEMORY TABLE INSTALLATION(ID VARCHAR(255) NOT NULL,ADDEDENTITIESCOUNT INTEGER,DELETEDENTITIESCOUNT INTEGER,ERRORMESSAGE VARCHAR(255),LASTREADMEFILENAME VARCHAR(255),LASTUPDATEMICROS BIGINT,LOADDATETIME BIGINT,MODIFIEDENTITIESCOUNT INTEGER,README VARCHAR(500000),STATUS VARCHAR(255),"TYPE" VARCHAR(255),UPDATEFILE_ID_OID VARCHAR(255),CONSTRAINT INSTALLATION_PK PRIMARY KEY(ID),CONSTRAINT INSTALLATION_FK1 FOREIGN KEY(UPDATEFILE_ID_OID) REFERENCES UPDATEFILE(ID))
 CREATE INDEX INSTALLATION_N49 ON INSTALLATION(UPDATEFILE_ID_OID)
 CREATE MEMORY TABLE INSTALLATION_DELETEDENTITYLIST(ID_OID VARCHAR(255) NOT NULL,"ELEMENT" LONGVARBINARY,IDX INTEGER NOT NULL,CONSTRAINT INSTALLATION_DELETEDENTITYLIST_PK PRIMARY KEY(ID_OID,IDX),CONSTRAINT INSTALLATION_DELETEDENTITYLIST_FK1 FOREIGN KEY(ID_OID) REFERENCES INSTALLATION(ID))
 CREATE INDEX INSTALLATION_DELETEDENTITYLIST_N49 ON INSTALLATION_DELETEDENTITYLIST(ID_OID)
 CREATE MEMORY TABLE INSTALLATION_MODIFIEDENTITYLIST(ID_OID VARCHAR(255) NOT NULL,"ELEMENT" LONGVARBINARY,IDX INTEGER NOT NULL,CONSTRAINT INSTALLATION_MODIFIEDENTITYLIST_PK PRIMARY KEY(ID_OID,IDX),CONSTRAINT INSTALLATION_MODIFIEDENTITYLIST_FK1 FOREIGN KEY(ID_OID) REFERENCES INSTALLATION(ID))
 CREATE INDEX INSTALLATION_MODIFIEDENTITYLIST_N49 ON INSTALLATION_MODIFIEDENTITYLIST(ID_OID)
 CREATE MEMORY TABLE INSTALLATION_ADDEDENTITYLIST(ID_OID VARCHAR(255) NOT NULL,"ELEMENT" LONGVARBINARY,IDX INTEGER NOT NULL,CONSTRAINT INSTALLATION_ADDEDENTITYLIST_PK PRIMARY KEY(ID_OID,IDX),CONSTRAINT INSTALLATION_ADDEDENTITYLIST_FK1 FOREIGN KEY(ID_OID) REFERENCES INSTALLATION(ID))
 CREATE INDEX INSTALLATION_ADDEDENTITYLIST_N49 ON INSTALLATION_ADDEDENTITYLIST(ID_OID)
 CREATE USER SA PASSWORD ""
 GRANT DBA TO SA
 SET WRITE_DELAY 20
 SET SCHEMA PUBLIC

5. Restart the tomcat process:
bigstart restart tomcat

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


902377-4 : HTML profile forces re-chunk even though HTML::disable

Links to More Info: BT902377

Component: Local Traffic Manager

Symptoms:
HTML profile performs a re-chunk even though HTML::disable has been executed in the HTTP_RESPONSE event.

Conditions:
Using HTML::disable in an HTTP_RESPONSE event.

Impact:
The HTML profile still performs a re-chunk.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


901669-6 : Error status in 'tmsh show cm failover-status', and stale data in some tmstat tables, after management IP address change.

Links to More Info: BT901669

Component: TMOS

Symptoms:
-- The 'tmsh show cm failover-status' command shows a status of 'Error' when the command is run on a peer of a device that underwent a management IP address change.

-- Should the sod_tg_conn_stat or sod_tg_msg_stat tmstat tables be inspected using the tmctl command, the tables show stale information in the entry_key column.

Note: Additionally, in certain cases, it is possible for failover functionality to be broken after the management IP address change, meaning devices remain stuck in an improper Active/Active or Standby/Standby state. This further aspect of the issue is tracked under ID999125. This ID tracks only the cosmetic defect.

Conditions:
-- Two or more devices in a sync-failover device-group.
-- The management IP address is changed on one of the devices.

The error appears under either of these conditions:
-- The 'tmsh show cm failover-status' is run on a peer of the device that underwent the management IP address change.
-- The sod_tg_conn_stat or sod_tg_msg_stat tmstat tables are inspected using the tmctl command.

Impact:
The 'tmsh show cm failover-status' command indicates an error.

Workaround:
You can work around this issue by running the following command on the peers of the device which underwent a management IP address change:

tmsh restart sys service sod

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


898929-6 : Tmm might crash when ASM, AVR, and pool connection queuing are in use

Links to More Info: BT898929

Component: Local Traffic Manager

Symptoms:
TMM crashes and generates a core file.

Conditions:
-- System is provisioned for at least ASM, AVR, and LTM.
-- An LTM pool is configured to use connection queuing.
-- The LTM pool is used on a virtual server with an analytics profile.

Impact:
Tmm might crash. Traffic disrupted while tmm restarts.

Workaround:
Disable connection queuing on the pool.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


896941 : Common Criteria ccmode script updated

Links to More Info: BT896941

Component: TMOS

Symptoms:
Configuration of SSH must be done to support Common Criteria compliance. This is currently done by following instructions in the Common Criteria Guidance Document.

Conditions:
Common Criteria compliance configuration.

Impact:
This update automates the SSH configuration.

Workaround:
Continue to follow Common Criteria Guidance document instructions for SSH configuration.

Fix:
Added SSH configuration to meet Common Criteria requirements.

Fixed Versions:
17.0.0, 16.1.3


895557-5 : NTLM profile logs error when used with profiles that do redirect

Links to More Info: BT895557

Component: Local Traffic Manager

Symptoms:
As of BIG-IP version 14.1, HTTP iRule commands that inspect HTTP state after the commands HTTP::respond, HTTP::redirect, and HTTP::retry returns errors instead of returning corrupt data (https://support.f5.com/csp/article/K23237429).

When the NTLM profile is configured, it does the same through a built-in TCL rule where among several things, it tries to check if HTTP::cookie exists. If a profile like HTTP exists wherein a redirect/respond/retry is configured, it results in a TCL error informing the admin that they are accessing an invalid HTTP state.

Conditions:
-- NTLM profile is configured alongside HTTP profile
-- One of the redirect/respond/retry commands has been executed before the NTLM profile accesses the state of HTTP (for ex. HTTP::collect, HTTP::close, HTTP::cookie, etc.).

Impact:
Tcl error is seen in /var/log/ltm informing the admin that the iRule operation executed after HTTP::redirect/retry/respond is not supported.

For example -
TCL error: _plugin_rule_/Common/ntlm_default_iis <HTTP_REQUEST> - ERR_NOT_SUPPORTED (line 1) invoked from within "HTTP::cookie exists [PROFILE::ntlm insert_cookie_name]"

Fixed Versions:
17.0.0, 16.1.2, 16.0.1.2, 15.1.4, 14.1.4.2


890917-8 : Performance may be reduced while processing SSL traffic

Component: Local Traffic Manager

Symptoms:
Under certain conditions, TMM and MCP may consume excessive resources while processing SSL traffic.

Conditions:
-- Using a virtual server with OCSP auth configured.

Impact:
High resource consumption may lead to reduced performance and eventually to a failover event.

Workaround:
None.

Fix:
TMM and MCP now process SSL traffic as expected.

Fixed Versions:
16.1.3.3, 15.1.8.1


888289-8 : Add option to skip percent characters during normalization

Links to More Info: BT888289

Component: Application Security Manager

Symptoms:
An attack signature is not detected.

Conditions:
-- The payload is filled with the percent character in between every other character.
-- The bad unescape violation is turned off.
-- The illegal metacharacter violation is turned off.

Impact:
An attack goes undetected.

Workaround:
Turn on the bad unescape violation or the metacharacter violation.

Fix:
Added an internal parameter, normalization_remove_percents. Its default is 0 (zero), meaning that the previous behavior is maintained. When enabled, the normalization of the data before running the signature removes the percent characters (as it does to high ASCII and space characters).

Fixed Versions:
17.0.0, 16.1.1, 16.0.1.2, 15.1.4, 14.1.4.2, 13.1.4.1


887117-4 : Invalid SessionDB messages are sent to Standby

Links to More Info: BT887117

Component: TMOS

Symptoms:
SessionDB messages sent from Active to Standby are dropped due to inconsistencies detected in the message. You see logs in /var/log/ltm:

SessionDB ERROR: received invalid or corrupt HA message; dropped message.

Conditions:
-- High availability (HA) pair configuration.
-- SessionDB messages sent from Active to Standby.

Impact:
Standby drops these messages

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4.1


886649-5 : Connections stall when dynamic BWC policy is changed via GUI and TMSH

Links to More Info: BT886649

Component: TMOS

Symptoms:
Connections stall when dynamic BWC policy is changed via GUI and TMSH.

Conditions:
Issue is seen when you have a dynamic bandwidth control policy configured, and you make a change to the policy via the GUI and TMSH.

Impact:
Connection does not transfer data.

Workaround:
Restart TMM. Delete the relevant configuration, create a new configuration, and apply it.

Fixed Versions:
17.0.0.1, 16.1.3, 15.1.6.1, 14.1.5.1


886533-5 : Icap server connection adjustments

Links to More Info: BT886533

Component: Application Security Manager

Symptoms:
Request getting to the ICAP server takes a long time to process (several seconds), which makes the whole transaction slower than expected. When testing the connection to the ICAP server itself, you determine that it is fast.

Conditions:
This happens especially with large file uploads that are mixed with smaller file uploads. The smaller uploads are waiting for the bigger upload.

Impact:
Slow responses to specific requests.

Workaround:
None.

Fix:
This release provides greater responsiveness of the internal queue to the ICAP thread.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


885765-1 : ASMConfig Handler undergoes frequent restarts

Links to More Info: BT885765

Component: Application Security Manager

Symptoms:
Under some settings and load the RPC handler for the tsconfd process restarts frequently.

Conditions:
When processing a large number of configuration updates.

Impact:
The RPC handler for the tsconfd process restarts frequently, causing unnecessary churn and noisy logs

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


883049-9 : Statsd can deadlock with rrdshim if an rrd file is invalid

Links to More Info: BT883049

Component: Local Traffic Manager

Symptoms:
-- RRD graphs are not updated.
-- System statistics are stale.
-- Commands such as 'tmsh show sys memory' may not complete.
-- qkview does not complete, as it runs "tmsh show sys memory'.

You may see errors:

-- err statsd[5005]: 011b0600:3: Error ''/var/rrd/endpisession' is too small (should be 15923224 bytes)' during rrd_update for rrd file '/var/rrd/endpisession'.
-- err statsd[5005]: 011b0600:3: Error '-1' during rrd_update for rrd file '/var/rrd/endpisession'.

Conditions:
Truncation of a binary file in /var/rrd.

Impact:
Stats are no longer collected. Statsd and rrdshim deadlock.

Workaround:
Remove the truncated file and restart statsd:
bigstart restart statsd

Fix:
Now detecting and rectifying truncation of RRD files.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


882709-6 : Traffic does not pass on tagged VLANs on VE configured on Hyper-V hypervisors

Links to More Info: BT882709

Component: TMOS

Symptoms:
Traffic does not pass on tagged VLANs when a BIG-IP Virtual Edition (VE) is deployed on a Hyper-V hypervisor.

This may manifest as traffic failing after an upgrade from earlier (unaffected) software versions.

Note: This functionality worked as expected in v13.x and earlier, and if the same VE is downgraded to v13.x, VLAN tagging functionality is restored.

This is due to an interoperability issue between RedHat Enterprise Linux (RHEL) and Microsoft Hyper-V, which seems to affect RHEL v7.3 and RHEL v7.5.

Hyper-V on Windows Server 2016 and Windows Server 2012 do not seem to identify the version of the built-in LIS correctly on Centos 7.3 or Centos 7.5 (which are built on RHEL 7.3 and RHEL 7.5 respectively).

Although there is a statement of support by Microsoft for VLAN tagging on RHEL 7.3 and 7.5 when running on Hyper-V, that functionality does not appear to work at present: Supported CentOS and Red Hat Enterprise Linux virtual machines on Hyper-V :: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/Supported-CentOS-and-Red-Hat-Enterprise-Linux-virtual-machines-on-Hyper-V.

Conditions:
-- BIG-IP VE is deployed on a Hyper-V hypervisor.
-- VLAN configured in BIG-IP VE with tagged interfaces, e.g.:

    net vlan external {
        interfaces {
            1.1 {
                tagged
            }
        }
        tag 4000
    }

-- At present, VLAN tagging on the v14.x and v15.x releases does not work because those releases are running on CentOS 7.3 and 7.5 respectively, which both are affected by the MS/RHEL interoperability issue.

-- BIG-IP v12.x and v13.x use a different (older) CentOS version, so VLAN tagging works without issue on those releases.

Impact:
-- The system does not prevent you from configuring tagged VLANs, even though they do not pass traffic.

-- Although upgrades complete and you can reboot into the new boot location (or you can set up on Hyper-V from scratch), traffic does not pass (into the guest) across VLANs that are tagged.

Important: If using tagged VLANs on VE setups on Hyper-V is critical to your configuration, you might want to elect to postpone upgrading from a working, v12.x and v13.x release.

Workaround:
Essentially, there is no workaround in this release; you must reconfigure the virtual machine to use separate, untagged interfaces for each VLAN.

Note: Although this is technically a problem between Hyper-V and the built-in LIS on RHEL 7.3/7.5, this issue is being tracked internally in this bug.

Behavior Change:
In this release, traffic does not pass on tagged VLANs when a BIG-IP Virtual Edition (VE) is deployed on a Hyper-V hypervisor.

This functionality worked as expected in v13.x and earlier, and if the same VE is downgraded to v13.x, VLAN tagging functionality is restored.

Important: If using tagged VLANs on VE setups on Hyper-V is critical to your configuration, you might want to elect to postpone upgrading from a working, v12.x and v13.x release.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


881809-8 : Client SSL and Server SSL profile hardening

Links to More Info: K31523465, BT881809


881085-4 : Intermittent auth failures with remote LDAP auth for BIG-IP managment

Links to More Info: BT881085

Component: TMOS

Symptoms:
There are intermittent auth failures when accessing the BIG-IP administration interfaces via SSH or the GUI.

Conditions:
-- Remote LDAP auth is configured.
-- An idle timeout RST is received on the LDAP connection before the configured auth LDAP idle-timeout expires. This RST might be generated by tmm (if the connection to the LDAP server is via a defined VLAN), some other intervening device on the network, or from the LDAP server itself (depending on its connection time limit).

Impact:
There might be intermittent remote-auth failures.

Workaround:
Set the auth ldap idle-timeout to a smaller value, for example, via tmsh:
modify auth ldap system-auth idle-timeout 299

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


876677-2 : When running the debug version of TMM, an assertion may be triggered due to an expired DNS lookup.

Links to More Info: BT876677

Component: Global Traffic Manager (DNS)

Symptoms:
When running the debug version of TMM, if a particular DNS lookup takes more than 30 seconds, TMM may assert with a message in the /var/log/tmm file similar to the following example:

notice panic: ../modules/hudfilter/3dns/cache_resolver.c:2343: Assertion "standalone refcnt must be one" failed.

Conditions:
-- Using the debug TMM
-- Using the RESOLV::lookup iRule command
-- The DNS server targeted by the aforementioned command is running slowly or malfunctioning

Impact:
TMM crashes and, in redundant configurations, the unit fails over.

Workaround:
Do not use the debug TMM.

Fix:
The debug assert was removed and replaced by a debug log.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


874941-4 : HTTP authentication in the access policy times out after 60 seconds

Links to More Info: BT874941

Component: Access Policy Manager

Symptoms:
HTTP authentication in the access policy times out after 60 seconds, where previously, the timeout was 90 seconds.

Conditions:
Encountering the timeout of HTTP authentication in the access policy in this version of the software.

Impact:
HTTP authentication times out 30 seconds earlier than it did in previous versions. There is no way to configure this timeout value, so authentication fails for operations that require greater than 60 seconds to complete.

Workaround:
None.

Fix:
Added options to configure the HTTP connection and request timeouts in HTTP authentication.

1. A db key to configure Connection Timeout for HTTP Server configuration:

+[APM.HTTP.ConnectionTimeout]
+default=10
+type=integer
+min=0
+max=300
+realm=common
+scf_config=true
+display_name=APM.HTTP.ConnectionTimeout


2. A db key to configure Request Timeout for HTTP Server configuration:

+[APM.HTTP.RequestTimeout]
+default=60
+type=integer
+min=0
+max=600
+realm=common
+scf_config=true
+display_name=APM.HTTP.RequestTimeout

Behavior Change:
Added db variables APM.HTTP.ConnectionTimeout and APM.HTTP.RequestTimeout as options to configure the HTTP connection and request timeouts in HTTP authentication.

The APM.HTTP.ConnectionTimeout defaults to 10 seconds, and the APM.HTTP.RequestTimeout defaults to 60 seconds.

Note: These defaults are the same as the values in earlier releases, so there is no effective functional change in behavior.

Fixed Versions:
16.1.2.2, 15.1.6.1, 14.1.5


873617-1 : DataSafe is not available with AWAF license after BIG-IP startup or MCP restart.

Links to More Info: BT873617

Component: Fraud Protection Services

Symptoms:
DataSafe is not available with an AWAF license.

Conditions:
-- AWAF license
-- BIG-IP startup or MCP restart

Impact:
DataSafe is not available.

Workaround:
Reset to default license.antifraud.id variable.
tmsh modify sys db license.antifraud.id reset-to-default.

Fix:
Additional DataSafe license validation during MCP startup after license information is loaded.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


858005-1 : When APM VPE “IP Subnet Match” agent configured with leading/trailing spaces runtime evaluation results in failure with error in /var/log/apm "Rule evaluation failed with error:"

Links to More Info: BT858005

Component: Access Policy Manager

Symptoms:
APM Access Policy evaluation failed.

Conditions:
When APM VPE “IP Subnet Match” agent configured with leading/trailing spaces there is no configuration error but runtime evaluation results in failure with error message in /var/log/apm:
"Rule evaluation failed with error:"

Impact:
APM end user’s session cannot be established.

Workaround:
Using APM VPE remove all leading/trailing spaces from config of “IP Subnet Match” agent

Fix:
This issue is fixed by trimming spaces from IP Subnet Match agent config in VPE

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


854129-6 : SSL monitor continues to send previously configured server SSL configuration after removal

Links to More Info: BT854129

Component: In-tmm monitors

Symptoms:
After an SSL profile has been removed from a monitor, a monitor instance continues to use settings from the previously-configured server SSL profile, such as client certificate or ciphers or supported TLS versions.

Conditions:
-- In-TMM monitors enabled.
-- SSL monitor configured with a server SSL profile.
-- Setting the monitor's 'SSL Profile' parameter to 'none'.

Impact:
The previously configured settings, such as certificate or cipher, continue to be used for monitoring pool members, which may result in unexpected health check behavior/pool member status.

Workaround:
An administrator can avoid this issue by ensuring the monitor's 'SSL Profile' parameter specifies a profile (i.e., is not 'none').

Note: In some software versions, changing a monitor's SSL profile from one profile to a different profile may not take effect. For information about this behavior, see https://cdn.f5.com/product/bugtracker/ID912425.html

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


849029-7 : No configurable setting for maximum entries in CRLDP cache

Links to More Info: BT849029

Component: Access Policy Manager

Symptoms:
There is no setting provided to configure maximum entries the in CRLDP cache.

Conditions:
In a configuration with tens of thousands of CRLDP and hundreds of thousands or millions of certificates, certain operations might encounter an internal limit, resulting in a number of revoked certificates.

Impact:
No settings exist. Cannot set maximum entries in CRLDP cache.

Workaround:
None.

Fix:
There is now a setting for configuring maximum entries in CRLDP cache.

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.4.4


844045-4 : ASM Response event logging for "Illegal response" violations.

Links to More Info: BT844045

Component: Application Security Manager

Symptoms:
Response log is not available when the request is legal but returns an illegal response status code.
In ASM, logging profiles allow the logging of all blocked responses. The existing response logging allows either all requests or illegal requests only which does not contain response logging data.

Conditions:
-- Response logging is enabled
-- An illegal response occurs

Impact:
Response logging does not occur.

Workaround:
N/A

Fix:
When a response has ASM response violations and response logging is enabled only for when there was a violation, ASM includes the response in the log.

Added an internal variable:
disable_illegal_response_logging -- default value 0.

If the response logging is enabled in the GUI, only the response logs are captured.
If the variable disable_illegal_response_logging is set to 1, then response logging is disabled(even if enabled in GUI).

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


842013-1 : ASM Configuration is Lost on License Reactivation

Links to More Info: BT842013

Component: Application Security Manager

Symptoms:
After re-activating a BIG-IP license, if the configuration fails to load and reverts to a base config load, the ASM policy config contains 'default' or 'stub' policies, even after fixing the error that caused the configuration to fail to load.

Conditions:
1) A parsing error exists in the BIG-IP config such that 'tmsh load sys config verify' would fail
2) There is a license reactivation or the configuration is reloaded

Impact:
ASM policy configuration is lost and all policies are reverted to empty 'stubs'

Workaround:
In the case of license re-activation/before upgrade:

   Run the command "tmsh load sys config verify" prior to license activation on ASM units to be sure that the config will pass parsing and avoid the fallback to base configuration load.

   In a case of booting the system into the new version:

   Option 1:

      1. Using the steps in either K4423 or K8465, fix the issue that was preventing the config to load.
      2. Reload the config from the fixed UCS file using the command in K13132.

   Option 2:

      1. Roll back to the old version.
      2. Fix the issue that was preventing the config to load.
      3. Before activating the Boot Location of the new version at System >> Software Management : Boot Locations, make sure to set the option Install Configuration to Yes. see: K64400324

   Option 3: If one of the high availability (HA) units successfully upgraded, then use config-sync to push the working config to the failing unit.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


838305-9 : BIG-IP may create multiple connections for packets that should belong to a single flow.

Links to More Info: BT838305

Component: Local Traffic Manager

Symptoms:
Due to a known issue, BIG-IP may create multiple connections for packets that should belong to a single flow. These connections will stay in the connection table until the idle timeout is reached. These connections can be used for forwarding the traffic.

Conditions:
BIG-IP may create multiple connections for packets that should belong to a single flow when both following conditions are true:
- Packets are coming at a very high rate from the network.
- Flow handling these packets is torn down.

Impact:
This might result in packets from the client being handled by one flow and packets from the server being handled by a different flow.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


832133-7 : In-TMM monitors fail to match certain binary data in the response from the server

Links to More Info: BT832133

Component: In-tmm monitors

Symptoms:
Pool members are incorrectly marked DOWN by a monitor. The pool members send the expected response to the probe, but the BIG-IP system marks them DOWN.

Conditions:
This issue occurs when all of the following conditions are met:

- In-TMM monitoring is enabled on the system (the 'bigd.tmm' db key is set to 'enable'; note this is set to 'disable' by default).

- One or more TCP or HTTP monitors specify a receive string using HEX encoding, in order to match binary data in the server's response.

- Depending on the HEX values specified (currently values in the range of 0x80-0xBF are believed to be affected), response matching fails.

Impact:
Objects that are meant to be marked UP are marked DOWN. As a result, no load balancing occurs to affected resources.

Workaround:
Either one of the following workarounds can be used:

- Disable in-TMM monitoring by setting 'bigd.tmm' to 'disable'.

- Do not monitor the application through a binary response (if the application allows it).

Fix:
The monitor finds the recv string and shows the pool or member as available.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


830361-9 : CVE-2012-6711 Bash Vulnerability

Links to More Info: K05122252, BT830361


830341-5 : False positives Mismatched message key on ASM TS cookie

Links to More Info: BT830341

Component: Application Security Manager

Symptoms:
ASM system triggers false positives for ASM Cookie Hijacking violation with reason "Mismatched message key"

Conditions:
-- An HTTP request containing an old frame cookie with a different message key from the main ts cookie is rejected
-- The cookie is left intact

Impact:
All subsequent requests are rejected on ASM Cookie Hijacking violation

Workaround:
1. Disable "Learn Host Names" flag all policies. If the policy builder is on manual mode, they need to change it back to Auto mode, disable "Learn Host Names", then change to manual mode.

OR

2. Delete the mismatched cookie. This will cause the violations to stop occurring if the request comes from a legit endpoint

Fix:
In order to activate the changed functionality, set internal parameter ignore_cookies_msg_key to 1 and restart asm by executing following commands in CLI:
/usr/share/ts/bin/add_del_internal add ignore_cookies_msg_key 1
bigstart restart asm

Once enabled, ASM system does not trigger false positives.

Fixed Versions:
17.0.0, 16.1.2.1, 16.0.1.2, 15.1.4, 14.1.4.2, 13.1.4.1


828761-5 : APM OAuth - Auth Server attached iRule works inconsistently

Links to More Info: BT828761

Component: Access Policy Manager

Symptoms:
The iRule attached to the OAuth Resource Server (RS) is not triggered when the traffic hits the virtual server.

Conditions:
The issue occurs during a reboot of the BIG-IP device containing an OAuth server config and an attached iRule, or when the iRule is initially assigned to the OAuth Server.

Impact:
OAuth scope check agent fails with 'HTTP error 503': as the iRule attached to the RS virtual server is not triggered.

Workaround:
For existing OAuth servers with the iRule attached, modify the iRule, for example, adding a log. This makes the iRule trigger when it is initially attached or loaded.

Fix:
The iRule is triggered when a request comes to the OAuth RS virtual server.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


827393-5 : In rare cases tmm crash is observed when using APM as RDG proxy.

Links to More Info: BT827393

Component: Access Policy Manager

Symptoms:
Tmm may crash when APM is configured as an RDG proxy to access Microsoft remote desktops and applications.

Conditions:
APM is used as RDG proxy

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
Tmm does not crash when APM is configured as RDG proxy.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1, 14.1.4.5, 13.1.5


823877-7 : CVE-2019-10098 and CVE-2020-1927 apache mod_rewrite vulnerability

Links to More Info: K25126370, BT823877


818889-1 : False positive malformed json or xml violation.

Links to More Info: BT818889

Component: Application Security Manager

Symptoms:
A false positive malformed XML or JSON violation occurs.

Conditions:
-- A stream profile is attached (or the http profile is set to rechunk on the request side).
-- A json/XML profile attached to the virtual.

Impact:
A false positive violation.

Workaround:
Modify the http profile to work in preserve mode for request chunking (this workaround is not possible in 16.1).

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


815901-2 : Add rule to the disabled pem policy is not allowed

Links to More Info: BT815901

Component: Policy Enforcement Manager

Symptoms:
Adding rule to PEM policy is not allowed

Conditions:
A PEM policy is disabled

Impact:
You are unable to add rules to a PEM policy if it is disabled.

Fix:
Allow adding rules to disabled PEM policy

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


805821-1 : GTP log message contains no useful information

Links to More Info: BT805821

Component: Service Provider

Symptoms:
GTP profile and GTP iRules provide no useful information in order to proceed with troubleshooting.

Conditions:
GTP profile or iRules fails to process message

Impact:
User lacks of information for troubleshooting

Workaround:
N/A

Fix:
GTP error log has been replaced with a more useful message. The new log message provides more intuitive information including the reason and, in some messages, location of data that causes the failure.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4, 13.1.5


803965-10 : Expat Vulnerability: CVE-2018-20843

Links to More Info: K51011533, BT803965


803109-4 : Certain configuration may result in zombie forwarding flows

Links to More Info: BT803109

Component: Local Traffic Manager

Symptoms:
OneConnect profile in conjunction with 'Source-port preserve-strict' or cmp-hash setting of 'dst-ip' or 'src-ip' on the server-side VLAN may result in zombie forwarding flows.

On the server-side the incoming traffic hits a different TMM from the one that handles the outgoing traffic.

Unexpected 'Inet port exhaustion' messages may be logged in the LTM log file.

Conditions:
-- OneConnect configured.

And one of the following:

-- Source-port is set to preserve-strict.
-- The cmp-hash setting on the server-side VLAN is set to 'dst-ip' or 'src-ip'.

Impact:
Zombie forwarding flows. Over time, the current allocation count grows and does not return to its prior level when traffic stops.

The current allocation can be checked with this command:
# tmctl memory_usage_stat name=connflow -s name,cur_allocs

Workaround:
You can use any of the following workarounds:

-- Remove the OneConnect profile from the Virtual Server.

-- Do not use 'source-port preserve-strict' setting on the Virtual Server.

-- Set the 'cmp-hash default' on the server-side VLAN if it is set to 'cmp-hash src-ip' or 'cmp-hash dst-ip'.

Note: After making this change, it may be necessary to run the command 'tmsh restart sys service tmm', which will clear the old flows but also impact traffic. Traffic interrupted while tmm restarts.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


797797-7 : CVE-2019-11811 kernel: use-after-free in drivers

Links to More Info: K01512680, BT797797


794385-6 : BGP sessions may be reset after CMP state change

Links to More Info: BT794385

Component: Local Traffic Manager

Symptoms:
A CMP (Clustered Multiprocessing) state change occurs when the state of the BIG-IP system changes.

This happens in the following instances:
  - Blade reset.
  - Booting up or shutting down.
  - Running 'bigstart restart'.
  - Setting a blade state from/to primary/secondary.

During these events, there is a small chance that ingress ACK packet of previously established BGP connection is going to be disaggregated to the new processing group(TMMs) and selected TMM is ready to process traffic, but is not ready yet to process traffic for existing connection. In this case, connection isn't processed and reset instead.

Conditions:
-- VIPRION chassis with more than one blade.
-- CMP hash of affected VLAN is changed from the Default value, for example, to Source Address.
-- BGP peering is configured.
-- CMP state change is occurred on one of the blades.
-- BGP ingress ACK packet is disaggregated to TMM, which either wrong TMM or not ready to process the packet of already established connection

Impact:
Affected BGP peering is reset and dynamic routes learnt by the configured protocol are withdrawn, making it impossible to advertise dynamic routes of affected routing protocols from the BIG-IP system to the configured peers. This can lead to unexpected routing decisions on the BIG-IP system or other devices in the routing mesh.

In most cases, unexpected routing decisions are from networks learnt by affected routing protocols when the routing process on the BIG-IP system becomes unreachable. However, this state is short-lived, because the peering is recreated shortly after the routing protocol restarts. The peering time depends on the routing configuration and responsiveness of other routing devices connected to the BIG-IP system. It's the usual routing convergence period, which includes setting the peering and exchanging routing information and routes.

Workaround:
There is no workaround, but the issue was never seen with a configuration where CMP hash of affected VLAN is changed back to Default value.

Fix:
BGP session is no longer reset during CMP state change.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5


780857-4 : HA failover network disruption when cluster management IP is not in the list of unicast addresses

Links to More Info: BT780857

Component: Local Traffic Manager

Symptoms:
If the cluster management IP address is not in the list of failover network unicast addresses, the blade management IP addresses in the unicast mesh will not be able to receive failover messages from peer devices.

Conditions:
-- VIPRION chassis or vCMP guest on a VIPRION chassis.
-- Per-blade management IP addresses listed in the failover network unicast mesh.
-- No cluster management IP address listed.

Impact:
The blade management IP addresses in the failover network unicast mesh stop functioning:

[root@VIP2200-R75-S5:/S1-green-P::Standby:In Sync] config # tmctl -w 200 -S sod_tg_conn_stat
entry_key local_failover_addr remote_device_name pkts_received transitions last_msg status
----------------------------- ------------------- ------------------------------ ------------- ----------- ---------- ------
10.200.75.8->10.10.10.1:1026 10.10.10.1:1026 VIP2200-R75-S8.sin.pslab.local 3249 3 1555399271 1
10.200.75.8->10.200.75.3:1026 10.200.75.3:1026 VIP2200-R75-S8.sin.pslab.local 0 1 0 0 <--
10.200.75.8->10.200.75.4:1026 10.200.75.4:1026 VIP2200-R75-S8.sin.pslab.local 0 1 0 0 <--

Workaround:
You can add an explicit management IP firewall rule to allow this traffic:

tmsh modify security firewall management-ip-rules rules add { accept_udp_1026 { place-before first ip-protocol udp destination { ports add { 1026 } } action accept } }

This will add a firewall policy so port 1026 is no longer locked down, and the blade management IP addresses in the unicast mesh should begin to function properly.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


755976-9 : ZebOS might miss kernel routes after mcpd deamon restart

Links to More Info: BT755976

Component: TMOS

Symptoms:
After an mcpd daemon restart, sometimes (in ~30% of cases) ZebOS is missing some of kernel routes (virtual addresses).

One of the most common scenario is a device reboot.

Conditions:
-- Dynamic routing is configured.
-- Virtual address is created and Route Advertisement is configured:
imish -e 'sh ip route kernel'
-- mcpd daemon is restarted or device is rebooted.

Impact:
The kernel route (virtual address) is not added to the ZebOS routing table and cannot be advertised.

Workaround:
There are several workarounds; here are two:

-- Restart the tmrouted daemon:
bigstart restart tmrouted

-- Recreate the affected virtual address.

Fix:
The kernel route is now present in the ZebOS routing table after mcpd daemon restart.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


749332-1 : Client-SSL Object's description can be updated using CLI and with REST PATCH operation

Links to More Info: BT749332

Component: TMOS

Symptoms:
REST PUT fails to update the object description when proxy-ca-cert and proxy-ca-key are not configured, and triggers an error:
SSL forward proxy RSA CA key is missing.

Conditions:
Issue is seen only with REST PUT operation, and when proxy-ca-cert and proxy-ca-key are not configured.

Impact:
REST PUT operation cannot be used to update/modify the description.

Workaround:
You can use either of the following:

-- You can use TMSH to update/modify the description, even if proxy-ca-cert and proxy-ca-key are not configured.

-- You can also use PATCH operation and send only the required field which need modification.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.4


748886-4 : Virtual server stops passing traffic after modification

Links to More Info: BT748886

Component: Local Traffic Manager

Symptoms:
A virtual server stops passing traffic after changes are made to it.

Conditions:
-- Virtual server is using a port-list or address-list
-- High availability (HA) environment with multiple traffic groups
-- A change is made to the virtual server

Impact:
Every time you make changes to the virtual server, the traffic-group for the virtual address is changed, and traffic goes down.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


742753-8 : Accessing the BIG-IP system's WebUI via special proxy solutions may fail

Links to More Info: BT742753

Component: TMOS

Symptoms:
If the BIG-IP system's WebUI is accessed via certain special proxy solutions, logging on to the system may fail.

Conditions:
This issue is known to happen with special proxy solutions that do one of the following things:

- Remove the Referer header.

- Modify the HTTP request in such a way that the Referer and Host headers no longer tally with one another.

Impact:
Users cannot log on to the BIG-IP system's WebUI.

Workaround:
As a workaround, you can do any of the following things:

- Access the BIG-IP system's WebUI directly (i.e., bypassing the problematic proxy solution).

- Modify the proxy solution so that it does not remove the Referer header (this is only viable if the proxy does not alter the Host header).

- Modify the proxy solution so that it inserts compatible Referer and Host headers.

Fix:
CSRF checks based on HTTP headers pre-logon have been improved.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


740321-1 : iControl SOAP API does not follow current best practices

Links to More Info: K50310001, BT740321


738593-3 : Vmware Horizon session collaboration (shadow session) feature does not work through APM.

Links to More Info: BT738593

Component: Access Policy Manager

Symptoms:
When the VMware virtual desktop interface (VDI) is configured, session collaboration or shadow session does not work.

Conditions:
-- VMware VDI configured and Desktop resource is accessed with native client only.
-- Launch resources and VMware Horizon Client will use Blast protocol to display VMware sessions.
-- Shadow session is enabled in desktop.

Impact:
Desktop's Shadow session resource icon is not showed on webtop of native client.

Workaround:
None

Fix:
Users should see Desktop's shadow session icon when resources are loaded on to webtop of native client.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


724653-5 : In a device-group configuration, a non-empty partition can be deleted by a peer device during a config-sync.

Links to More Info: BT724653

Component: TMOS

Symptoms:
In a device-group configuration, a BIG-IP administrator can add a non-synced object to a partition on one device, then delete that partition on a peer device, syncing the delete (this is assuming the partition is empty on the peer).

Although the config-sync operation will report as having completed successfully on both devices, and no errors will be visible in the /var/log/ltm file of either device, a number of issues can manifest at a later time.

For instance, assuming the non-synced object was a VLAN, listing all VLANs across all partitions will return the following error:

root@(bigip-ntr-d)(cfg-sync In Sync)(Active)(/)(tmos)# list net vlan recursive
01070712:3: Internal error, can't load folder or nested folder for: /test/my_vlan

And reloading the config will return the following error (as the partition has been deleted, including its flat config files):

root@(bigip-ntr-d)(cfg-sync In Sync)(Active)(/Common)(tmos)# load sys config
Loading system configuration...
  /defaults/asm_base.conf
  /defaults/config_base.conf
  /defaults/ipfix_ie_base.conf
  /defaults/ipfix_ie_f5base.conf
  /defaults/low_profile_base.conf
  /defaults/low_security_base.conf
  /defaults/policy_base.conf
  /defaults/wam_base.conf
  /defaults/analytics_base.conf
  /defaults/apm_base.conf
  /defaults/apm_saml_base.conf
  /defaults/app_template_base.conf
  /defaults/classification_base.conf
  /var/libdata/dpi/conf/classification_update.conf
  /defaults/urlcat_base.conf
  /defaults/daemon.conf
  /defaults/pem_base.conf
  /defaults/profile_base.conf
  /defaults/sandbox_base.conf
  /defaults/security_base.conf
  /defaults/urldb_base.conf
  /usr/share/monitors/base_monitors.conf
Loading configuration...
  /config/bigip_base.conf
  /config/bigip_user.conf
  /config/bigip.conf
01070523:3: No Vlan association for STP Interface Member 1.2.
Unexpected Error: Loading configuration process failed.

These are just examples, and the exact failures will depend on the type of non-synced object and its use within your configuration.

Conditions:
-- Two or more devices in a device-group configuration.
-- Using partitions that contain non-synced objects.
-- Deleting the partition on a device and syncing the changes to the other devices.

Impact:
The partition is deleted on the peer device, even though it still contains non-synced objects. A number of config issues can arise at a later time as a result of this.

Workaround:
In some cases, if you need to define non-synced objects, you can do so in partitions or folders that are associated with 'device-group none' and 'traffic-group none'. This would prevent the partition or folder from synchronizing to other devices in the first place.

Fix:
Validation has been added that will make a config-sync receiver reject the operation if this includes the deletion of a non-empty partition. In this case, the config-sync will fail and report an error message similar to the following example:

0107082a:3: All objects from local device and all HA peer devices must be removed from a partition (test) before the partition may be removed, type ID (467), text ID (60706)

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.5


720610-4 : Automatic Update Check logs false 'Update Server unavailable' message on every run

Links to More Info: BT720610

Component: TMOS

Symptoms:
The Automatic Update Check operation erroneously logs a message indicating that the Update Server is unavailable on every run, successful or not.

Conditions:
The BIG-IP system is configured to run the Automatic Update Check feature.

Impact:
Misleading 'PHONEHOME: Update Server unavailable' messages in the log file, implying that the update server is not available.

Workaround:
None.

Fix:
The Automatic Update Check operation no longer logs false messages.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.2.7, 13.1.3


717806-8 : In the case of 'n' bigd instances, uneven CPU load distribution is seen when a high number of monitors are configured

Links to More Info: BT717806

Component: Local Traffic Manager

Symptoms:
Load average peaks are observed when a high number of monitors (>= 200) are configured across 'n' bigd instances.

Conditions:
When a high number of monitors are configured across 'n' bigd instances. CPU load peaks appear and disappear periodically.

Impact:
No performance impact

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


713754-3 : Apache vulnerability: CVE-2017-15715

Links to More Info: K27757011


708991-1 : Newly entered password is not remembered.

Links to More Info: BT708991

Component: TMOS

Symptoms:
- Upon enabling password remember feature and running 'tmsh load sys config default', the password history fails to verify and save the newly entered password.
- Upon installing a BIG-IP image for the first time, the default password is not updated.

Conditions:
- Installing first time BIG-IP image.
- Resetting the configuration using 'tmsh load sys config default'.

Impact:
The password is not remembered.

Workaround:
N/A

Fix:
Corrected selinux policy script of the file /etc/security/opasswd for access permission.

Fixed Versions:
17.0.0, 16.1.2


686783-1 : UlrCat custom database feed list does not work when the URL contains a www prefix or capital letters.

Links to More Info: BT686783

Component: Traffic Classification Engine

Symptoms:
If a UrlCat custom database feed list has URLs containing a www prefix or capital letters, the URLs are not categorized when queried.

Conditions:
The UrlCat custom database feed list with URL containing www prefix or capital letters,

Impact:
Improper classification

Workaround:
Using an iRule can help classify the URL.

Fix:
Normalized the URL before putting in the custom database.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


672963-1 : MSSQL monitor fails against databases using non-native charset

Links to More Info: BT672963

Component: Local Traffic Manager

Symptoms:
MSSQL monitor is fails against databases using non-native charset.

Conditions:
MSSQL monitor configured to monitor a database that is using non-native charset (ISO-8859-1).

Impact:
MSSQL monitoring always marks node / member down.

Workaround:
On BIG-IP v13.x and v14.0.x, you can work around this issue using the following steps:

1. Log in to the BIG-IP console into a bash prompt.

2. Run the following command:
mount -o remount,rw /usr; ln -s /usr/java-64/openjdk/lib/charsets.jar /usr/java/openjdk/lib/charsets.jar; mount -o remount,ro /usr

3. Restart bigd:
bigstart restart bigd

Fix:
MSSQL monitor can be used effectively against a database using a non-native charset.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


669046-7 : Handling large replies to MCP audit_request messages

Links to More Info: BT669046

Component: TMOS

Symptoms:
When receiving very large replies to MCP messages (e.g., when viewing audit logs from the GUI), MCP can run out of memory and produce a core file. This is due in part to the amount of data returned, and also due in part to memory handling.

In a production environment, fragmentation naturally occurs over the lifetime of MCP, thus increasing the odds of this happening. In addition, larger configurations cause more space to be consumed in MCPD and might more easily lead to the fragmentation, resulting in this issue.

Conditions:
Receiving very large replies to MCP messages (e.g., from audit_request messages, which occurs when you view audit logs from the GUI).

Memory usage is already high.

Impact:
Allocation of memory for viewing the audit logs fails. MCP can run out of memory and produce a core file.

Workaround:
Use tmsh/bash to view the audit logs instead of the GUI when audit logs are extremely large and memory usage is already high.

Fix:
Viewing audit logs in the GUI is now limited to 10,000 lines, so this issue no longer occurs.

Behavior Change:
The GUI is limited to viewing no more than 10,000 lines of the audit log.

You can use tmsh/bash to view audit logs larger than 10,000 lines.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


528894-5 : Config-Sync after non-Common partition config changes results in extraneous config stanzas in the config files of the non-Common partition

Links to More Info: BT528894

Component: TMOS

Symptoms:
Configuration stanzas that do not belong in the files of a non-Common partition appear there. These stanzas could include, for example, 'net trunk' or 'sys ha-group' objects.

Conditions:
-- The system includes partitions other than Common.

-- Configuration in a partition other than Common is modified.

-- A Config-Sync operation not involving an overwrite takes place (it is also possible to reproduce this issue on a standalone BIG-IP system by doing a save operation like the following: "tmsh save sys config partitions { Common other }").

Impact:
/config/partitions/<partition_name>/bigip_base.conf will contain extraneous config stanzas (such as the ones mentioned in Symptoms).

/config/bigip_base.conf will no longer contain config stanzas that belong there.

Note that the impact is mostly cosmetic. An affected device will still be able to correctly load its configuration even if some config stanzas appear in the wrong flat config file.

However, Administrators performing audits of the flat config files will be perplexed as to why some stanzas are moving back and forth between partitions.

Workaround:
If you wish to restore your flat config files to their proper state after the issue has already occurred, simply run "tmsh save sys config" on the affected device.

Alternatively, to prevent the issue in the first place, you can Config-Sync using the following command "tmsh run cm config-sync force-full-load-push to-group <device-group>".

Note that neither workaround is permanent and the issue will reoccur.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6, 13.1.5


435231 : Support RFC7919 Negotiated Finite Field Diffie-Hellman Ephemeral parameters

Links to More Info: K79342815, BT435231

Component: Local Traffic Manager

Symptoms:
RFC7919 Negotiated Finite Field Diffie-Hellman Ephemeral (FFDHE) parameters are not supported.

Conditions:
This affects ciphersuites that use Diffie–Hellman Ephemeral (DHE) key exchange.

Impact:
Support for larger FFDHE groups will be chosen if offered by the client.

Note: You might notice an impact to performance as compared with the previously chosen DHE 1024.

Workaround:
None

Fix:
With the support for the FFDHE groups defined in RFC7919, the system now supports DHE2048, DHE3072, DHE4096 keys. The default DHE key size is 2048 bits. (In previous BIG-IP versions, the default was 1024 bits.)

You can configure this default value by enabling or disabling the DB variable tmm.ssl.dh1024. To do so, use the following TMSH command syntax:

 modify sys db tmm.ssl.dh1024 value enable/disable

To use FFDHE2048, FFDHE3072, FFDHE4096 keys, you define them in a cipher rule, and then use this rule in a cipher group before associating it with an SSL profile.

Note: If you use a cipher rule that does not define any of the FFDHE2048, FFDHE3072, or FFDHE4096 groups (e.g., f5-default), this feature is not enabled.

For more information, and for steps to define these rules, see K79342815: BIG-IP support for RFC7919 Negotiated Finite Field Diffie-Hellman Ephemeral (FFDHE) :: https://support.f5.com/csp/article/K79342815.

Behavior Change:
RFC7919 Negotiated FFDHE parameters are now supported.

The FFDHE2048, FFDHE3072, FFDHE4096 keys are supported in this release. The default is DHE 2048 bits.

In previous versions, the default DHE key size was 1024 bits. If you want to continue to use DHE 1024 you can enable db var tmm.ssl.dh1024, by default it is disabled.

For more information, and for steps to use this feature, see K79342815: BIG-IP support for RFC7919 Negotiated Finite Field Diffie-Hellman Ephemeral (FFDHE) :: https://support.f5.com/csp/article/K79342815.

Fixed Versions:
17.0.0, 16.1.3


423519-5 : Bypass disabling the redirection controls configuration of APM RDP Resource.

Links to More Info: K74302282, BT423519

Component: Access Policy Manager

Symptoms:
User can bypass RDP resource redirection restrictions between RDP remote machine and local machine.

Conditions:
1. Create RDP resource. Disable redirection parameter.
2. Launch the resource.
3. Launch RDP Client, enable redirection parameter.

Impact:
User can bypass RDP resource restrictions.

Workaround:
NA

Fix:
User is not allowed to perform any redirection controls of the RDP resource.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1174873-3 : The location header query string separate is converted from "?" to "%3F" breaking multi-domain

Links to More Info: BT1174873

Component: Access Policy Manager

Symptoms:
In muti-domain Single Sign-On (SSO), the location header query string separate is converted from "?" to "%3F" breaking multi-domain.

Conditions:
- Create an access policy with a redirect to login page.

Impact:
Breaking multi-domain.

Workaround:
None

Fix:
Issue is with the normalized URL function, removed the search filter parameters normalization.

Fixed Versions:
16.1.3.3, 15.1.8.1


1143073-4 : iControl SOAP vulnerability CVE-2022-41622

Links to More Info: K94221585, BT1143073


1137037 : System boots into an inoperative state after installing engineering hotfix with FIPS 140-2/140-3 license in version 16.1.x

Links to More Info: BT1137037

Component: Local Traffic Manager

Symptoms:
The BIG-IP persistently starts in an inoperative state after installing an engineering hotfix with a console error similar to the following:

- FIPS or Common Criteria power-up self-test failure.
- This system has been placed in an error state.
- To recover return to the grub menu and select another volume or reinstall the system.
- On many devices pressing the escape key followed by the key will bring up a menu which allows the system to be restarted.

Power-up self-test failures: <number>

Unmounting file systems
System halting.

Conditions:
- First boot after installing an engineering hotfix.
- FIPS 140-2 or FIPS 140-3 license.
- Running BIG-IP version 16.1.x releases or later, for example 16.1.3.1.

Impact:
Unable to boot the BIG-IP system into an operational state after applying an engineering hotfix, and required to boot to a known good volume. For more information about FIPS mode preventing system boot, see https://support.f5.com/csp/article/K52534643

Workaround:
None

Fix:
The BIG-IP system successfully boots after installing an Engineering hotfix on a system with a FIPS 140-2 or FIPS 140-3 license.

Fixed Versions:
16.1.3.2


1134085-2 : Intermittent TMM core when iRule is configured with SSL persistence

Links to More Info: BT1134085

Component: Local Traffic Manager

Symptoms:
The TMM core file is observed.

Conditions:
Under certain conditions, the TMM core file is observed with iRule and SSL persistence.

Impact:
TMM core file is observed.

Workaround:
Perform either of the following tasks:

- Disable SSL persistence
- Disable iRule

Fix:
Added fix to handle cases which can lead to the TMM core file generation.

Fixed Versions:
16.1.3.3, 15.1.8.1


1123149 : Sys-icheck fail for /etc/security/opasswd

Links to More Info: BT1123149

Component: TMOS

Symptoms:
In common criteria mode, when password-memory is set to > 0 and create the user and login from CLI causes the system integrity check to failed

An error message may be logged "ERROR: S.5...... c /etc/security/opasswd (no backup)"

Conditions:
--- common criteria mode enabled
--- password-memory set to > 0 in password-policy configuration
--- create a new user and login first time using CLI
--- run sys-icheck

Impact:
System integrity check failure when common criteria mode is enabled

Workaround:
None

Fixed Versions:
16.1.3.1


1122473-4 : TMM panic while initializing URL DB

Component: Access Policy Manager

Symptoms:
TMM panic because of a race condition which prevents the TMM from accessing files related to the URL database.

Conditions:
While the BIG-IP system is rebooting, if an infrequent timing delay occurs, one or more files related to the URL database may be created in the wrong order of sequence.

Impact:
Traffic disrupted while TMM restarts.

Workaround:
None. Repeated attempts at rebooting may eventually succeed.

Fixed Versions:
16.1.3.3


1120685 : Unable to update the password in the CLI when password-memory is set to > 0

Links to More Info: BT1120685

Component: TMOS

Symptoms:
A BIG-IP system with password-memory enabled will fail to update the user password in the first login using the CLI

Conditions:
Password-memory set to > 0 in password-policy configuration

Impact:
Not able to update the user password in the first login using the CLI.

Workaround:
Create the user using the GUI and log in from the GUI.

Fixed Versions:
16.1.3.1


1120433-2 : Removed gtmd and big3d daemon from the FIPS-compliant list

Links to More Info: BT1120433

Component: TMOS

Symptoms:
The gtmd is not able to establish a secure connection to big3d due to failure in handshake because no common ciphers were found between big3d and gtmd in FIPS mode.

Conditions:
-- BIG-IP versions 16.1.3 and above
-- FIPS 140-3 license is installed on BIG-IP or its a FullBoxFIPS device.
-- Connections are established between big3d and gtmd in FIPS mode.

Impact:
SSL handshakes fail between big3d and gtmd because no common ciphers are present.

Workaround:
None

Fix:
Gtmd and big3d can now communicate when FIPS mode is enabled.

Fixed Versions:
16.1.3.1


1113549-3 : System boots into an inoperative state after installing engineering hotfix with FIPS140-2/140-3 License

Links to More Info: BT1113549

Component: Local Traffic Manager

Symptoms:
The BIG-IP system persistently starts up in an inoperative state after installing an engineering hotfix with a console error similar to:

*** FIPS or Common Criteria power-up self-test failure.
*** This system has been placed in an error state.
*** To recover return to the grub menu and select another volume
*** or reinstall the system.
***
*** On many devices pressing the escape key followed by the (
*** key will bring up a menu which allows the system to be restarted.

Power-up self-test failures: <number>

Unmounting file systems
System halting.

Conditions:
- First boot after installing an engineering hotfix.
- FIPS 140-2 or FIPS140-3 license.

Impact:
You are unable to boot the BIG-IP system into an operational state after applying an engineering hotfix, and you are required to boot to a known good volume.

For more information, see K52534643: Overview of the Platform FIPS BIG-IP system :: https://support.f5.com/csp/article/K52534643

Workaround:
None

Fix:
The BIG-IP system successfully boots after installing an engineering hotfix on a system with a FIPS 140-2 or FIPS140-3 license.

For a complete solution for BIG-IP software v16.1.3.1 and later v16.1.x releases, you must also have the additional fix described in ID 1137037 https://cdn.f5.com/product/bugtracker/ID1137037.html.

Fixed Versions:
16.1.3.1


1113385-4 : Expired REST tokens are not getting deleted from /var/run/pamcache on standalone BIG-IP

Links to More Info: BT1113385

Component: TMOS

Symptoms:
REST tokens which are present in /var/run/pamcache on BIG-IP are not deleted after token expiration when there are a large number of tokens.

Conditions:
When a large number of tokens are generated.

Impact:
Disk space exhausted on the BIG-IP system.

Workaround:
Try to remove token files from /var/run/pamcache manually.
# rm -f /var/run/pamcache/*

Fix:
Expired token are removed from /var/run/pamcache by the BIG-IP system.

Fixed Versions:
16.1.3.3, 15.1.8.1


1112445-2 : Fix to avoid zombie node on the chain

Component: Local Traffic Manager

Symptoms:
TMM crashing because of not removing complete nodes

Conditions:
Flush to finally remove complete nodes will avoids the TMM crash and avoids leaving zombie nodes

Impact:
Subsequent activities on the connection could lead to TMM to crash or misbehave in a variety of ways.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
16.1.3.3


1110205-2 : SSL::collect in CLIENTSSL_DATA prevents orderly connection shutdown

Links to More Info: BT1110205

Component: Local Traffic Manager

Symptoms:
If a virtual server has an iRule performing SSL payload processing in CLIENTSSL_DATA, TMM fails to process or forward an ingress TCP FIN from a client, leaving the connection in a zombie state until it eventually idles out.

Conditions:
The issue occurs only when SSL::collect is used in CLIENTSSL_DATA

   when CLIENTSSL_DATA {
        log local0. "."
        SSL::release
        SSL::collect
    }

Impact:
Unexpected growth in the number of connections idling on a virtual server leads to memory pressure.

Workaround:
None

Fixed Versions:
16.1.3.1


1109833-1 : HTTP2 monitors not sending request

Links to More Info: BT1109833

Component: Local Traffic Manager

Symptoms:
HTTP2 monitors do not send monitor traffic, incorrectly marking pool members down.

Conditions:
HTTP2 monitor configured.

Impact:
Pool members marked down erroneously.

Workaround:
Use different monitor type, if possible.

Fixed Versions:
16.1.3.1


1108181-2 : iControl REST call with token fails with 401 Unauthorized

Links to More Info: BT1108181

Component: TMOS

Symptoms:
For a short period after creating or refreshing a token, the iControl REST calls may fail with a 401 Unauthorized error and an HTML body content, or a 401 F5 Authorization Required error and a JSON body content.

When using F5 Ansible modules for BIG-IP, the modules may fail with an error "Expecting value: line 1 column 1 (char 0)".

The AS3 may return an error "AS3 API code: 401".

Conditions:
- REST call using valid token.
- Can commonly occur on the call after a token has been refreshed or a Token list has been requested.

Impact:
The iControl REST calls may temporarily fail (typically less than 1 second) after the creation or refresh of an iControl REST token.

Workaround:
After being issued a token or refreshing a token, wait a second before attempting to use it.

If this does not work, request a new token.

No workaround exists for AS3 or F5 Ansible BIG-IP modules.

Fix:
A race condition on a PAM file update has been resolved. Tokens should remain valid.

Fixed Versions:
17.0.0.1, 16.1.3, 15.1.6.1, 14.1.5.1


1107437-3 : TMM may crash when enable-rapid-response is enabled on a DNS profile

Component: Global Traffic Manager (DNS)

Symptoms:
TMM crash

Conditions:
The "enable-rapid-response" is enabled on a DNS profile. The BIG-IP is a platform that has hardware syncookie capability.

Impact:
TMM restart, unexpected failover

Workaround:
Disable rapid response or disable syncookies in the tcp profile attached to the rapid response virtual server.

Fix:
TMM no longer crashes

Fixed Versions:
16.1.3.3, 15.1.8.1


1106325 : Upgrade from BIG-IP 16.1.3 to BIG-IP 17.0 does not work when FIPS mode is enabled

Links to More Info: BT1106325

Component: TMOS

Symptoms:
Upgrade from BIG-IP 16.1.3 to BIG-IP 17.0 does not work when FIPS mode is enabled.

Error displayed in console:
01070911:3: The requested integer (2) is out of range (0 - 1) for fipscipherversion in httpd (/Common/httpd)
Unexpected Error: Loading configuration process failed.

Conditions:
- BIG-IP 16.1.3
- FIPS 140-3 license is installed on BIG-IP 16.1.3 or its a FullBoxFIPS device.
When FIPS 140-3 is enabled in BIG-IP 16.1.3 then the upgrade to version 17.0 will fail.

Impact:
Upgrade from version 16.1.3 to version 17.0 fails when FIPS enabled.

Workaround:
Disable the FIPS 140-3 license and then perform the upgrade.

Fixed Versions:
16.1.3


1106289-2 : TMM may leak memory when processing sideband connections.

Links to More Info: K43024307, BT1106289


1106161-2 : Securing iControlRest API for appliance mode

Links to More Info: K13325942, BT1106161


1105389-4 : Incorrect HTTP request handling may lead to resource leak

Component: Application Security Manager

Symptoms:
Under certain configurations specific HTTP requests may cause BD to waste resources and hang during the ingress process.

Conditions:
An unspecified virtual server configuration attached to an ASM policy.

Impact:
Excess resource consumption on the BIG-IP.

Traffic disruption while TMM restarts.

Workaround:
Configure high availability.

Fix:
The connection handling between the enforcer and the client after a response violation is received has been corrected.

Fixed Versions:
16.1.3.3, 15.1.8


1104493-1 : Client-side abort during server-side establishment may cause tmm to behave abnormally in HTTP MRF proxy

Links to More Info: K90024104, BT1104493


1104073-2 : Use of iRules command whereis with "isp" or "org" options may cause TCL object leak.

Links to More Info: BT1104073

Component: Local Traffic Manager

Symptoms:
When iRules command whereis is being used with "isp" or "org" options and underlying GEOIP database(s) have not been loaded,
cur_allocs for tcl memory increases over time and does not return to the prior level.

Conditions:
- iRules command whereis is used with "isp" or "org" options
- The underlying GEOIP database(s) have not been loaded

Impact:
Cur_allocs for tcl memory increases over time and does not return to the prior level.

Workaround:
Load the underlying GEOIP database(s) before using "isp" or "org" options of the iRules command whereis.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1103369-2 : DELETE of REST auth token does not result in deletion of the pamcache token file on a multi slot VIPRION chassis or vCMP guest

Links to More Info: BT1103369

Component: TMOS

Symptoms:
Deletion of REST tokens from cache /var/run/pamcache is not happening when the token expires or is deleted.

Conditions:
A large number of REST auth tokens get created.
Multi-slot VIPRION or Multi-slot vCMP Guest.

Impact:
The deleted token is still present in the cache.
Memory is consumed as a cache is stored in an in-memory filesystem

Workaround:
Remove the pamcache directory from the set being acted upon by "csyncd" by running the following commands in bash:

    # clsh "cp /etc/csyncd.conf /etc/csyncd.conf.$(date +%Y%m%d_%H%M%S)"

    # clsh "sed -i '/run\/pamcache/,+2s/^/#/' /etc/csyncd.conf"

    # clsh "bigstart restart csyncd"

Fix:
Auth tokens in /run/pamcache are deleted as required.

Fixed Versions:
16.1.3.3, 15.1.8.1


1103233-2 : Diameter in-tmm monitor is logging disconnect events unnecessarily

Links to More Info: BT1103233

Component: Service Provider

Symptoms:
Errors are logged to /var/log/ltm:

err tmm[20104]: 01cc0006:3: Peer (<peer>) connection state has changed: disconnected

Conditions:
A diameter in-tmm monitor is configured

Impact:
Debug logs are logged at the error level.

Workaround:
None

Fix:
Log level has been changed to the debug level for the peer disconnected log.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1101705-2 : RSA-KEX ciphers list are removed from httpd configuration in FIPS mode since these are non-approved ciphers for FIPS 140-3 certification

Links to More Info: BT1101705

Component: TMOS

Symptoms:
- RSA-KEX ciphers list are removed from httpd configuration when FIPS mode is enabled since these are non-approved ciphers for FIPS 140-3 certification.
- Mandatory fix for FIPS 140-3 Certification.

Conditions:
- BIG-IP versions 16.1.3 and above.
- Applies to systems requiring FIPS 140-3 Certification.
- FIPS 140-3 license is installed on BIG-IP or its a FullBoxFIPS device.
- https connections are established using the RSA-KEX based ciphers

Impact:
- BIG-IP systems running without this fix on a release targeted for certification (BIG-IP 16.1.x or later) will not be running a FIPS 140-3 certified configuration.
- https connection using RSA KEX ciphers will not be successful when FIPS 140-3 license is installed in the device.

Workaround:
None

Fix:
Apply this fix to ensure that the system is compliant with FIPS 140-3 Certification.

Fixed Versions:
17.0.0.1, 16.1.3


1100609 : Length Mismatch in DNS/DHCP IPv6 address in logs and pcap

Links to More Info: BT1100609

Component: TMOS

Symptoms:
The wrong length is shown in logs for DNS/DHCP IPv6 addresses.

Conditions:
-- DNS/DHCP IPv6 configured in IKE-PEER configuration.
-- The tunnel is established.

Impact:
The length is reported incorrectly in the logs. It is reported as 15 when it should be reported as 16.

Workaround:
None

Fix:
Fix the logs.

Fixed Versions:
16.1.3


1097821-2 : Unable to create apm policy customization image using tmsh or VPE in the configuration utility command when source-path is specified

Links to More Info: BT1097821

Component: Access Policy Manager

Symptoms:
Creating an APM policy image file with source_path attribute fails.

Conditions:
APM provisioned

Impact:
You are unable to use the source_path attribute for creating APM customization image files.

Workaround:
Copy the image file to one of the directories of /var/config/rest/, /var/tmp/, /shared/tmp/ and use local_path instead of source_path.

E.g. create apm policy image-file test.jpg local-path /var/tmp/<file name>

Fixed Versions:
17.0.0.1, 16.1.3, 15.1.6.1, 14.1.5


1097193-2 : Unable to SCP files using WinSCP or relative path name

Links to More Info: BT1097193

Component: TMOS

Symptoms:
When attempting to retrieve a file with WinSCP, you receive an error dialog and the session will be terminated:

"SCP Protocol error: Invalid control record (r; elative addresses not allowed)

Copying files from remote side failed."

If attempting to transfer a file by relative path with a command line utility the transfer will fail with the message:
"relative addresses not allowed"

Conditions:
-- Running BIG-IP version with fix for ID 915981
-- Using WinSCP set to use SCP protocol to retrieve files from a BIG-IP system.
-- Using a relative remote path to transfer a file with command line scp utility.

Impact:
No longer able to use WinSCP to retrieve files such as packet captures, log archives, or other diagnostic data from the BIG-IP system.

Workaround:
Use a command line SCP tool that allows specifying an absolute path for the source and/or destination file (a path that starts with a forward slash /), when the source and/or destination locations are a BIG-IP device.

If the user ID is permitted to do so, you may use WinSCP in SFTP mode.

Fixed Versions:
16.1.3.1


1094177-4 : Analytics iApp installation fails

Links to More Info: BT1094177

Component: iApp Technology

Symptoms:
By default restjavad.disablerpmtasks value is true. This causes iApp RPM installation to be blocked.

Conditions:
Analytics iApp RPM installation

Impact:
The RPM installation fails with an error "403, Protocol Exception".

Workaround:
Change the restjavad.disablerpmtasks sys db variable to false, and then restart restjavad:

tmsh modify sys db restjavad.disablerpmtasks value false

To restart restjavad on a VIPRION or multi-bladed vCMP guest or multi-bladed F5OS tenant:
clsh tmsh restart sys service restjavad

To restart restjavad on an appliance or single-slot vCMP guest or F5OS tenant:
tmsh restart sys service restjavad

NOTE: This will require a cluster sync for any device groups configured for manual config sync. All updated systems will require a restart of restjavad for the change to take affect.

After restjavad restarts on all affected devices, you can perform the iApp installation.

Fix:
By default, the sys db variable restjavad.disablerpmtasks should be "false". When appliance mode is enabled, this DB key is forced to "true".

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.5.1


1093821-4 : TMM may behave unexpectedly while processing HTTP traffic

Component: Local Traffic Manager

Symptoms:
Under certain conditions, TMM may crash while processing HTTP traffic

Conditions:
- HTTP profile enabled

Impact:
TMM may crashing leading to a traffic interruption and failover event.

Fix:
TMM now processes HTTP traffic as expected.

Fixed Versions:
16.1.3.3


1093621-2 : Some SIP traffic patterns over TCP may cause resource exhaustion on BIG-IP

Links to More Info: K10347453


1091761-1 : Mqtt_message memory leaks when iRules are used

Links to More Info: BT1091761

Component: Local Traffic Manager

Symptoms:
Mqtt_message memory leaks when iRules like insert_after, insert_before, and respond are used.

Conditions:
Basic mqtt virtual server with any of the below rules ->insert_after
>insert_before
>respond

Impact:
Memory leak occurs and TMM may crash

Workaround:
NA

Fix:
There is no longer a memory leak with iRules usage

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1091565-1 : Gy CCR AVP:Requested-Service-Unit is misformatted/NULL

Links to More Info: BT1091565

Component: Policy Enforcement Manager

Symptoms:
Observed diameter protocol warning when Requested Service Unit(RSU) is empty for CCR-I and CCR-U requests.

Conditions:
If the 'Initial Quota' is EMPTY in policy under Policy Enforcement ›› Rating Groups, the BIG-IP system reports empty data in AVP: Requested-Service-Unit.

Impact:
In Wireshark, a protocol warning occurs.

Workaround:
None

Fix:
If the Initial PEM Quota values are EMPTY/0 We are updating the RSU values to Zero.

Fixed Versions:
16.1.3.1


1091345-2 : The /root/.bash_history file is not carried forward by default during installations.

Links to More Info: BT1091345

Component: TMOS

Symptoms:
By default, the /root/.bash_history file is not included in the UCS archives. As such, this file is not rolled forward during a software installation.

Conditions:
Performing a BIG-IP software installation.

Impact:
This issue may hinder the efforts of F5 Support should the need to determine what was done prior to a software installation arise.

Workaround:
None

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


1091249-2 : BIG-IP DNS and Link Controller systems may use an incorrect IPv6 translation address.

Links to More Info: BT1091249

Component: Global Traffic Manager (DNS)

Symptoms:
As BIG-IP DNS and Link Controller systems connect with one another (or with monitored BIG-IP systems) over iQuery, you may notice:

-- Log messages that specify IPv6 translation addresses non-existent in your configuration and often meaningless (as in not pertaining to some of the more common IPv6 address spaces). For example:

debug gtmd[24229]: 011ae01e:7: Creating new socket to connect to 2001::1 (a06d:3d70:fd7f:0:109c:7000::)

-- If you restart the gtmd daemon, the IPv6 translation address mentioned above between parenthesis changes to a new, random meaningless value.

-- The GTM portion of the configuration fails to synchronize.

Conditions:
IPv6 translation addresses are in use in relevant objects.

Impact:
The logs are misleading and the GTM portion of the configuration may fail to synchronize.

Workaround:
If possible, do not use IPv6 translation addresses.

Fix:
IPv6 translation addresses now function as designed.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


1090649-3 : PEM errors when configuring IPv6 flow filter via GUI

Links to More Info: BT1090649

Component: Policy Enforcement Manager

Symptoms:
An error occurs while configuring an IPv6 flow filter using the GUI:
0107174e:3: The source address (::) and source netmask (0.0.0.0) addresses for pem flow info filter (filter0) must be be the same type (IPv4 or IPv6).

Conditions:
Configuring an IPv6 flow filter using the GUI

Impact:
You are unable to configure the IPv6 flow filter via the GUI

Workaround:
The error does not occur when using tmsh.

Fix:
Modified the IPv6 Validation. Able to create IPV6 flow filter after the fix

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1090569-1 : After enabling a TLS virtual server, TMM crashes with SIGFPE and 1 hour later with SIGSEGV

Links to More Info: BT1090569

Component: TMOS

Symptoms:
Some SSL handshakes are fail when using the CRL certificate validator and tmm crashes.

Conditions:
-- TLS virtual server
-- The virtual server passes network traffic

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
Fixed a tmm crash related to the CRL certificate validator.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1


1089849 : NIST SP800-90B compliance

Links to More Info: BT1089849

Component: TMOS

Symptoms:
Common Criteria and FIPS 140-3 certifications require compliance with NIST SP800-90B; this completes that compliance.

Conditions:
This applies to systems requiring Common Criteria and/or FIPS 140-3 compliance.

Impact:
BIG-IP systems running without this fix on a release targeted for certification (BIG-IP 16.1.x or later) will not be using a Common Criteria and/or FIPS 140-3 certified configuration.

Workaround:
None

Fix:
Apply this fix to ensure that the system is compliant with NIST SP800-90B.

Fixed Versions:
17.0.0.1, 16.1.3


1087621-1 : IKEv2: IPsec CREATE_CHILD_SA (IKE) fails due to bad ECP payload

Links to More Info: BT1087621

Component: TMOS

Symptoms:
The tunnel stops working after initially starting with no problem.

The BIG-IP will send a bad KE (Key Exchange) Payload when rekeying the IKE SA with ECP.

Conditions:
-- IKEv2
-- ECP PFS
-- Peer attempts to re-key IKE SA (CREATE_CHILD SA) over existing IKE SA.

Impact:
IPsec tunnels stop working for periods of time.

Workaround:
Do not use ECP for PFS.

Fix:
ECP will work correctly when rekeying.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1


1087469-2 : iRules are not triggered when an SSL client connects to a BIG-IP system using an empty certificate.

Links to More Info: BT1087469

Component: Local Traffic Manager

Symptoms:
When an SSL client connects to BIG-IP system and sends an empty certificate, the CLIENTSSL_CLIENTCERT is not triggered for iRules.

Conditions:
- Virtual server configured on BIG-IP with a clientssl profile
- Client authentication on the virtual server is set to "request"
- iRule relying on CLIENTSSL_CLIENTCERT
- A client connects to BIG-IP using an empty certificate

Impact:
CLIENTSSL_CLIENTCERT irules aren't triggered.

Workaround:
None

Fix:
CLIENTSSL_CLIENTCERT irules are now triggered when receiving empty certificates.

Fixed Versions:
16.1.3.1, 15.1.6.1


1087217-2 : TMM crash as part of the fix made for ID912209

Links to More Info: BT1087217

Component: Local Traffic Manager

Symptoms:
TMM crashes.

Conditions:
BIG-IP versions 16.1.0 or later which includes the fix of ID912209.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fixed Versions:
16.1.3.1


1087201-6 : OpenSSL Vulnerability: CVE-2022-0778

Links to More Info: K31323265, BT1087201


1086897-1 : PEM subcriber lookup can fail for internet side/subscriber side new connections

Links to More Info: BT1086897

Component: Policy Enforcement Manager

Symptoms:
PEM subscriber lookup can fail for internet/subscriber side flow for new connections, as PEM uses the local address to look up the session, which is not the subscriber.

Conditions:
-- PEM enabled and configured
-- Subscriber session has multiple IP's
-- Each IP lands on a different TMM

Impact:
PEM subscriber lookup can fail on the internet side or subscriber side

Workaround:
None

Fix:
PEM subscriber lookup now always succeeds for internet side and subscriber side new connections,

Fixed Versions:
17.0.0, 16.1.2.2


1086677-4 : TMM Crashes in xvprintf() because of NULL Flow Key

Links to More Info: BT1086677

Component: Local Traffic Manager

Symptoms:
TMM crashes while passing traffic

Conditions:
This was observed during internal testing and occurred while making configuration changes while passing traffic.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
Fixed a tmm crash.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


1085729-2 : bd may crash while processing specific request

Links to More Info: K47204506, BT1085729


1085077-4 : TMM may crash while processing SIP-ALG traffic

Component: Carrier-Grade NAT

Symptoms:
Under certain conditions TMM may crash while processing SIP-ALG traffic

Conditions:
- SIP profile enabled

Impact:
TMM crash leading to a failover event

Workaround:
N/A

Fix:
TMM now processes SIP traffic as expected.

Fixed Versions:
17.0.0, 16.1.3.3, 15.1.8


1084993 : [PEM][Gy] e2e ID/h2h ID in RAR / RAA Not Matching

Links to More Info: BT1084993

Component: Policy Enforcement Manager

Symptoms:
E2e id and h2h id in Re-Authorisation Answer from PEM to OCS is not matching with Re-Authorisation Request from OCS to PEM.

Conditions:
Diameter-endpoint configuration. PCEF(PEM) communicating over gy interface with OCS for quota information.

Impact:
OCS will not be able to determine for which RAR it got RAA. This is catastrophic for billing.

Workaround:
None

Fix:
There was conversion issue in PEM, fixed it.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1084673-2 : GTM Monitor "require M from N" status change log message does not print pool name

Links to More Info: BT1084673

Component: Global Traffic Manager (DNS)

Symptoms:
The number of probes that are succeeding is changing in between different windows in which the "N" number of probes were sent.

Conditions:
- GTM/DNS is provisioned
- A "require M from N" monitor rule is assigned to a gtm pool or an individual gtm pool member.

Impact:
The log written to provide information on the changing number of successful probes does not contain information about the pool member.

Workaround:
None

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


1084173-1 : Unable to specify "no caching desired" for ephemeral DNS resolvers (i.e. RESOLV::lookup).

Links to More Info: BT1084173

Component: Global Traffic Manager (DNS)

Symptoms:
Each time the iRule command RESOLV::lookup is invoked with a different target IP address or internal virtual server, a unique resolver context is created.

However, for performance and memory preservation reasons, all ephemeral resolvers are backed by the same set of DNS caches.

This means that repeated identical queries to different ephemeral resolvers will always return the answer from the cache that was retrieved by the first ephemeral resolver (until the TTL of the record expires).

While this is fine in the traditional use of DNS, this may be problematic in certain specific use-cases. For example, this does not allow for per-user DNS servers to return different results for the same query. This technique could be used by an iRule to retrieve user-specific information to then spin up user-unique virtual environments.

Conditions:
Sending repeated queries for the same FQDN to different ephemeral resolvers (before the TTL expires) and expecting different results back.

Impact:
Inability to support specific use-cases in a BIG-IP iRule.

Fix:
Versions with the fix include a new DB key called dnscache.ephemeralsnocache, which defaults to "disable".

When set to "disable", the system behaves exactly as in previous releases.

When set to "enable", ephemeral resolvers spawned in an iRule by the RESOLV::lookup command no longer cache anything, thus allowing for use-cases similar to the example mentioned under Symptoms.

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1


1084013-4 : TMM does not follow TCP best practices

Links to More Info: K52494562, BT1084013


1083989-1 : TMM may restart if abort arrives during MBLB iRule execution

Links to More Info: BT1083989

Component: Local Traffic Manager

Symptoms:
"Unallocated flow while polling for rule work. Skipping." is logged in /var/log/ltm.

*or*

"flow in use" assert fails causing TMM to restart.

Conditions:
- Virtual using MBLB proxy.
- iRule with LB_SELECTED, CLIENT_CLOSED, and SERVER_CLOSED events.
- client connection is aborted while LB_SELECTED is queued for execution.

Impact:
TMM may restart unexpectedly.

Workaround:
Remove LB_SELECTED event from the iRule, if feasible.

Fix:
The MBLB proxy now correctly handles being aborted when it has iRule events queued for execution.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1083977-1 : MCPD crashes when changing HTTPD configuration, all secondary blades of clustered system remain offline

Links to More Info: BT1083977

Component: TMOS

Symptoms:
Making a configuration change to the HTTPD configuration causes MCPD to hang for five minutes, and then MCPD crashes and restarts.

On a multi-slot VIPRION, vCMP guest, or BIG-IP tenant, after upgrading to an affected version, all secondary blades may remain in an offline state.

Conditions:
Making a configuration change to the management HTTPD configuration.

Impact:
System goes offline and services restart.

On a VIPRION chassis, all secondary blades remain offline.

Workaround:
None

Fix:
The system remains stable when modifying the HTTPD configuration.

Fixed Versions:
17.0.0, 16.1.3


1083913-2 : Missing error check in ICAP handling

Links to More Info: BT1083913

Component: Application Security Manager

Symptoms:
Bd crashes.

Conditions:
Asm policy is configured for ICAP integration

Impact:
Traffic disrupted while bd restarts.

Workaround:
None

Fixed Versions:
16.1.3.1, 15.1.6.1, 14.1.5.1


1083537 : FIPS 140-3 Certification

Links to More Info: BT1083537

Component: TMOS

Symptoms:
For FIPS 140-3 Certification

Conditions:
This applies to systems requiring FIPS 140-3 Certification.

Impact:
BIG-IP systems running without this fix on a release targeted for certification (BIG-IP 16.1.x or later) will not be running a FIPS 140-3 certified configuration.

Workaround:
None

Fix:
Apply this fix to ensure that the system is compliant with FIPS 140-3 Certification.

Fixed Versions:
17.0.0.1, 16.1.2.2


1083225-2 : TMM may crash while processing SIP traffic

Component: Carrier-Grade NAT

Symptoms:
Under certain conditions TMM may crash while processing SIP traffic

Conditions:
- SIP profile enabled

Impact:
TMM crash leading to a failover event

Workaround:
N/A

Fix:
TMM now processes SIP traffic as expected.

Fixed Versions:
17.0.0, 16.1.3.3, 15.1.8.1


1082885-1 : MR::message route virtual asserts when configuration changes during ongoing traffic

Links to More Info: BT1082885

Component: Service Provider

Symptoms:
MR::message route virtual causes TMM to crash / panic when the configuration changes during ongoing traffic. This is due to
an invalid validation of the TYPEIDs when mis-matched virtual servers / proxies are identified because of the configuration change.

Conditions:
A BIG-IP configuration change is made while passing traffic.

Impact:
Traffic disrupted while tmm restarts.

Fix:
With the fix, proper validation of the Proxy TYPEIDs will make the server to gracefully close the connection when PROXIES TYPEIDs mismatch is detected and a relevant error log is printed in the ltm logs as well.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6, 14.1.5


1082505 : TLS ciphersuites including RSA-KEX are non-approved ciphers for FIPS 140-3 certification

Links to More Info: BT1082505

Component: Local Traffic Manager

Symptoms:
TLS ciphersuites including RSA KEX are non-approved ciphers as per FIPS 140-3 certification standard

Conditions:
- BIG-IP versions 16.1.3 and above
- FIPS 140-3 license is installed on BIG-IP or its a FullBoxFIPS device.
- f5-fips cipher-group is associated with SSL profiles
- Connections are established using the RSA-KEX based ciphers

Impact:
SSL handshake will not be successful.

Workaround:
Create a custom cipher-group including all the required cipher strings and associate with the SSL profiles.

Fix:
For FIPS 140-3 certification, TLS ciphersuites including RSA-KEX are reported as non-approved ciphers in fips mode, also these cipher strings have been removed from the f5-fips cipher group.

Fixed Versions:
17.0.0.1, 16.1.3


1082461-2 : The enforcer cores during a call to 'ASM::raise' from an active iRule

Links to More Info: BT1082461

Component: Application Security Manager

Symptoms:
In the case of 'ASM::raise' call execution from an iRule that contains a list length greater than 100, the enforcer (bd) will core.

Conditions:
A call to 'ASM::raise' with a list length greater than 100 from an iRule.

Impact:
Traffic disrupted while bd restarts.

Workaround:
While constructing the iRule, make sure that the list passed into 'ASM::raise' contains fewer than 100 elements.

Fix:
Fixed an enforcer core.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1


1082225-4 : Tmm may core while Adding/modifying traffic-class attached to a virtual server.

Links to More Info: BT1082225

Component: Local Traffic Manager

Symptoms:
Tmm may core with 'tmm SIGSEGV' while performing addition/updating of traffic class attached to a virtual server.

Conditions:
-- Some Traffic classes have been removed from the virtual server.
-- A new traffic class is attached to the virtual server, or modification of the existing traffic class is triggered.

Impact:
Traffic disrupted while tmm restarts.
The traffic class might not be applied as expected.

Workaround:
None

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1081201-1 : MCPD certification import hardening

Links to More Info: K64829234, BT1081201


1081153-2 : TMM may crash while processing administrative requests

Links to More Info: K93723284, BT1081153


1080581-1 : Virtual server creation is not allowed to have TCP, UDP and HTTP together with Client or Server SSL Profiles.

Links to More Info: BT1080581

Component: Local Traffic Manager

Symptoms:
During the upgrade, the configuration load fails with an error:

err mcpd[6381]: 01070734:3: Configuration error: A virtual server (/Common/my_virtual) is not allowed to have TCP, UDP and HTTP together with Client or Server SSL Profiles.

Conditions:
-- Upgrading from an earlier version that contains a QUIC profile in a virtual server having tcp, UDP, and HTTP together
-- Upgrading to version 15.1.5 or 16.1.2.2

Impact:
BIG-IP will remain in inoperative state after upgrade

Fix:
QUIC protocol is allowed to use tcp and udp protocol in combination

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.5.1


1080341-4 : Changing an L2-forward virtual to any other virtual type might not update the configuration.

Links to More Info: BT1080341

Component: Local Traffic Manager

Symptoms:
Changing an L2-forward virtual-server to any other virtual-server type might not update the saved configuration.

Conditions:
Changing an L2-forward virtual-server to any other virtual-server type.

Impact:
Traffic still behaves as if L2-forward virtual-server is configured.

Workaround:
Remove and re-create the affected virtual-server.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1080317-3 : Hostname is getting truncated on some logs that are sourced from TMM

Links to More Info: BT1080317

Component: TMOS

Symptoms:
Hostnames in the APM, IPSEC, SAAS, FW_LOG logs that are sourced from TMM are truncated.

Conditions:
The truncation occurs when the hostname contains a period (for example "my.hostname").

Impact:
Some logs contain truncated hostnames and some contain full hostnames. The inconsistent hostnames degrade the readability and therefore the usefulness of the logs.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1079909-1 : The bd generates a core file

Links to More Info: K82724554, BT1079909

Component: Application Security Manager

Symptoms:
The bd generates a core file and restarts.

Conditions:
- ASM running on BIG-IP version 15.1.5.1 or 15.1.6. Other versions are not affected.
- Content profile is configured to check attack signatures.

Impact:
Traffic is disrupted while bd restarts.

Workaround:
Set the internal parameter disable_second_extra_normalization to 1 and restart ASM by executing:

  /usr/share/ts/bin/add_del_internal add disable_second_extra_normalization 1
  bigstart restart asm

Note: This relaxes matching of attack signatures for some cases.

Fix:
Fixed a bd crash. As mentioned in Conditions field, there are only two official software versions, version 15.1.5.1 and version 15.1.6, that are affected by this bug. This bug was fixed on other major release branches (17.0.x, 16.1.x, 14.1.x, and 13.1.x) before publishing any affected versions to the field, thus this bug appears as fixed with those major releases, but there are actually no affected official versions.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.6, 13.1.5


1079817-1 : Java null pointer exception when saving UCS with iAppsLX installed

Links to More Info: BT1079817

Component: TMOS

Symptoms:
When saving a UCS the resulting archive does not contain iAppLX packages. This is because the POST to /shared/iapp/build-package gets a 400 error from restjavad.

The restjavad log files will show a null pointer exception when this occurs.

Conditions:
Saving UCS file when iAppLX packages are installed.

Impact:
When saving a UCS the resulting archive does not contain iAppLX packages.

Workaround:
None

Fix:
The RPM build completes successfully.

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.5.1


1079721 : OWASP 2017 A2 Category - Login enforcement link is broken

Links to More Info: BT1079721

Component: Application Security Manager

Symptoms:
Under A2 category, Broken Authentication: ‘Login Enforcement: Not fulfilled’ - if you click on the Not fulfilled link you end up with a broken link

Conditions:
1. Go to OWASP page (Security ›› Overview : OWASP Compliance)
2. Collapse Broken Authentication field
3. Click on Login Enforcement protection state link (Fulfilled or Not Fulfilled).

Impact:
Link is broken, and need to go manually to login enforcement tab in Policy Configuration page

Workaround:
Go to the related policy configuration page, click on Session and Logins tab. You will see there the Login Pages section.

Fixed Versions:
16.1.3.1


1079637-1 : Incorrect Neuron rule order

Links to More Info: BT1079637

Component: Advanced Firewall Manager

Symptoms:
The order of Neuron rules created for the virtual servers may be incorrect.

Conditions:
- Platforms with Neuron support (BIG-IP iSeries and Viprion B4450 blade) configured with a Turboflex profile other than turboflex-base.

Impact:
There are several features that rely on the Neuron rules.

In case of hardware SYN Cookie a TCP virtual server may not receive the TCP SYN packets even if the virtual server is not in SYN Cookie mode.

Some sPVA feature may behave unexpectedly.

Fix:
The order of the Neuron rules is now correct.

Fixed Versions:
17.0.0, 16.1.3, 15.1.5.1


1079505-4 : TMM may consume excessive resources while processing SSL Orchestrator traffic

Links to More Info: K52534925, BT1079505


1078821-1 : Upgrade tomcat with OpenJDK 1.7 32bit to OpenJDK 1.8 32bit

Links to More Info: BT1078821

Component: TMOS

Symptoms:
TMUI (the GUI) needs to be upgraded with OpenJDK 1.8 to support TLS 1.2 AES GCM ciphers for OAuth Provider Discovery

Conditions:
BIG-IP systems using the GUI

Impact:
Deployments which use Microsoft Azure AD as OAuth IDP, will start facing issues with OAuth Provider discovery after 31st Jan 2022. Microsoft is deprecating TLS1.0/1.1 and supporting TLS1.2 AES GCM ciphers only.

Fix:
Upgrade tomcat with OpenJDK 1.7 32bit to OpenJDK 1.8 32bit

Note: This results in an increase in the size of /usr. Although not an issue on its own, cumulative increases in /var, /usr, and /root might result in installation failures on iSeries devices when multiple slots contain software versions 16.1.x or later. Depending on the combination of versions, you might not be able to install/upgrade three TMOS software volumes on your iSeries device (see K41812306: The appdata volume on BIG-IP iSeries platforms is now larger :: https://support.f5.com/csp/article/K41812306 ).

Behavior Change:
Upgrade tomcat with OpenJDK 1.7 32bit to OpenJDK 1.8 32bit

Note: This results in an increase in the size of /usr. Although not an issue on its own, cumulative increases in /var, /usr, and /root might result in installation failures on iSeries devices when multiple slots contain software versions 16.1.x or later. Depending on the combination of versions, you might not be able to install/upgrade three TMOS software volumes on your iSeries device (see K41812306: The appdata volume on BIG-IP iSeries platforms is now larger :: https://support.f5.com/csp/article/K41812306 ).

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.5


1078765-1 : Arcsight remote log with 200004390,200004389 signatures in the request may crash the enforcer.

Links to More Info: BT1078765

Component: Application Security Manager

Symptoms:
A BD core may occur due to enforcement of 200004390 200004389 signatures with the combination of Arcsight remote logger enabled.

Conditions:
The request must contain 200004390 200004389 signatures with the combination of Arcsight remote logger attached to the virtual server.

Impact:
The enforcer may crash.

Workaround:
Disable 200004390 200004389 signatures.

Fix:
200004390 200004389 are now signatures enforced successfully.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1078721-1 : TMM may consume excessive resources while processing ICAP traffic

Links to More Info: K16187341, BT1078721


1078669-2 : iRule command “RESOLVER::name_lookup” returns null for TCP resolver with TC (truncated) flag set.

Links to More Info: BT1078669

Component: Global Traffic Manager (DNS)

Symptoms:
“RESOLVER::name_lookup” returns null for TCP resolver with TC set.

Conditions:
Backend server returns very large DNS response.

Impact:
iRule command does not give any response but with TC set.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


1078053-1 : TMM may consume excessive resources while processing STREAM traffic

Links to More Info: K99123750, BT1078053


1077701-1 : GTM "require M from N" monitor rules do not report when the number of "up" responses change

Links to More Info: BT1077701

Component: Global Traffic Manager (DNS)

Symptoms:
The number of probes that are succeeding is changing in between different windows in which the "N" number of probes were sent.

Conditions:
- GTM/DNS is provisioned.
- A "require M from N" monitor rule is assigned to a gtm resource.

Impact:
The change in the number of successful monitor probes isn't available which is useful for troubleshooting.

Workaround:
None

Fix:
A logline is written to show the change in the number of successful probes.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1077281-2 : Import xml policy fails with “Malformed xml” error when session awareness configuration contains login pages

Links to More Info: BT1077281

Component: Application Security Manager

Symptoms:
When a policy contains an individual login page in session tracking, the exported xml policy fails to be imported back due to error “Malformed XML: Could not resolve foreign key dependence”.

Conditions:
The policy contains an individual login page in session tracking and the policy is exported in xml format

Impact:
Import the policy fails with an error: "Could not resolve foreign key dependence”.

Workaround:
This occurs when using XML format only, so you can use binary export/import

Fix:
XML export/import now will work also if policy contains an individual login page in session tracking

Fixed Versions:
16.1.2.2, 15.1.6.1


1076921-1 : Hostname in BootMarker logs and /var/log/ltm logs that are sourced from TMM are getting truncated

Links to More Info: BT1076921

Component: TMOS

Symptoms:
1. BootMarker logs in all the log files are getting truncated.
2. LTM logs that are getting sourced from TMM are getting truncated.

Conditions:
-- Hostname contains a period.
-- Check Hostname in BootMarker logs and /var/log/ltm in which the logs sourced from TMM get truncated.

Impact:
Logs are not in useful state. Some logs contain truncated hostnames and some contain full hostnames.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1076401-5 : Memory leak in TMM (ldns) when exceeding dnssec.maxnsec3persec.

Links to More Info: BT1076401

Component: Global Traffic Manager (DNS)

Symptoms:
Memory leak leading to TMM running out of free memory.

Conditions:
-- Dnssec.maxnsec3persec set to non-default value (default 0 - unlimited).
-- Number of DNS requests leading to NSEC3 responses goes above the limit of dnssec.maxnsec3persec.

Impact:
TMM runs out of memory.

Workaround:
Set dnssec.maxnsec3persec to 0.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1076397-1 : TMSH hardening

Links to More Info: K13213418, BT1076397


1076377-3 : OSPF path calculation for IA and E routes is incorrect.

Links to More Info: BT1076377

Component: TMOS

Symptoms:
--OSPF path calculation for IA and E routes is incorrect.
--E2 route might be preferred over E1 route.
--Cost calculation for IA routes is incorrect.

Conditions:
Mixing E2/E1 routes and IA routes with different cost.

Impact:
Wrong route is installed.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2


1075205-1 : Using TCP::close after HTTP::redirect/HTTP::respond causes HTTP response not to be delivered to the client.

Links to More Info: BT1075205

Component: Local Traffic Manager

Symptoms:
Using TCP::close after HTTP::redirect/HTTP::respond causes HTTP response not to be delivered to the client.

Conditions:
iRule similar to:

ltm rule REDIRECT {
when HTTP_REQUEST {
   HTTP::redirect "https://[HTTP::host][HTTP::uri]"
   TCP::close
}

Impact:
Redirect/response not delivered to the client.

Workaround:
Remove TCP::close from an iRule.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2


1074517-1 : Tmm may core while adding/modifying traffic-class attached to a virtual server

Links to More Info: BT1074517

Component: Local Traffic Manager

Symptoms:
Tmm may core while adding/modifying traffic-class attached to a virtual server

Conditions:
-- Traffic class is attached to a virtual server.
-- Add an existing traffic class to a virtual server.
-- Afterwards, a new traffic class is attached to the virtual server, or modification of the existing traffic class is triggered.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1074113-1 : IPsec IKEv2: Selectors incorrectly marked up after disable ike-peer

Links to More Info: BT1074113

Component: TMOS

Symptoms:
When disabling an ike-peer, sometimes the traffic-selector is not marked "down" in one or both directions.

Conditions:
All the following must be true

-- IKEv2 IPsec tunnel
-- A nonzero value for ipsec.pfkey.load, ipsec.sp.migrate and ipsec.sp.owner is set.
-- During the life of the SA the tunnel was migrated to another tmm owner.

The final point is not normally visible unless debug2 logging is enabled on ike-daemon.

Impact:
Cosmetic. The traffic selector is incorrectly reported as up for one or both directions.

Workaround:
The selector state cannot be changed unless it goes up/down again. There is no way to manually fix it.

Fix:
Disabling an ike-peer config object will correctly mark the associated traffic-selector down.

Fixed Versions:
17.0.0, 16.1.2.2


1073973-1 : Gateway HTTP/2, response payload intermittently not forwarded to client.

Links to More Info: BT1073973

Component: Local Traffic Manager

Symptoms:
Some HTTP/2 requests through a Gateway HTTP2 (HTTP2 clientside/HTTP1 serverside, no MRF) stall, with:
   - the BIG-IP receives a request and forwards it to the server
   - the server responds with both headers and response body
   - the BIG-IP forwards the response headers back to the client
   - the BIG-IP does not forward the response body to the client

Conditions:
-- BIG-IP virtual server configured with an HTTP/2 profile on both the client side and server side
-- A high number of HTTP/2 requests traverse the HTTP/2 connection

Impact:
HTTP response body is not forwarded to the client from the BIG-IP system.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2


1073841-1 : URI normalization does not function as expected

Links to More Info: K66510514, BT1073841


1073625-2 : Peer (standby) unit's policies after autosync show a need for Apply Policy when the imported policy has learning enabled.

Links to More Info: BT1073625

Component: Application Security Manager

Symptoms:
ASM policy import is successful on Active unit and it syncs to standby device, but "Apply changes" is displayed on the standby device policies page.

Conditions:
1. XML policy with learning enabled imported via TMSH.
2. Autosync with incremental sync enabled on device-group with ASM sync enabled.

Impact:
The peer (standby) unit needs to have the policies applied manually even though everything is set to auto-sync

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


1073609-4 : Tmm may core while using reject iRule command in LB_SELECTED event.

Links to More Info: BT1073609

Component: Local Traffic Manager

Symptoms:
Tmm cores with SIGFPE "packet is locked by a driver"

Conditions:
-- Fastl4 virtual server
-- iRule attached that uses reject iRule command in LB_SELECTED event

Impact:
Traffic disrupted while tmm restarts.

Fix:
Tmm does not core while using iRules attached that uses reject iRule command in LB_SELECTED event.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1073549-1 : TMSH hardening

Links to More Info: K13213418, BT1073549


1073357-2 : TMM may crash while processing HTTP traffic

Links to More Info: K66510514, BT1073357


1073005-2 : iControl REST use of the dig command does not follow security best practices

Component: TMOS

Symptoms:
iControl REST does not follow security best practices when invoking the 'dig' command to perform DNS lookups via the /mgmt/tm/util/dig endpoint

Conditions:
This issue only affects standard deployments. Appliance Mode deployments are not affected

Impact:
Security best practices are not followed

Fix:
iControl REST now follows best practices when performing DNS lookups via the dig endpoint

Fixed Versions:
16.1.3.3, 15.1.8.1


1072953-2 : Memory leak in traffic management interface.

Links to More Info: BT1072953

Component: Local Traffic Manager

Symptoms:
When configuration objects that use a traffic management interface are modified, they leave behind orphaned objects. The memory leak can become significant over time if there are frequent config changes.

Conditions:
Request logging profile attached to a VIP.

Impact:
TMM uses more memory than it should.

Workaround:
Restart tmm to free the memory, avoid making frequent configuration changes to virtual servers that contain request logging profiles.

Fix:
Traffic management interface no longer leaks memory.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1072733-4 : Protocol Inspection IM package hardening

Component: Protocol Inspection

Symptoms:
Protocol Inspection IM packages do not follow current best practices.

Conditions:
- Authenticated administrative user
- Protocol Inspection IM packages uploaded to BIG-IP

Impact:
Protocol Inspection IM packages do not follow current best practices.

Workaround:
N/A

Fix:
Protocol Inspection IM packages now follows current best practices.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1072237-1 : Retrieval of policy action stats causes memory leak

Links to More Info: BT1072237

Component: TMOS

Symptoms:
When a virtual server with an L7 policy is present, the tmsh show ltm policy command triggers a memory leak.

Conditions:
The tmsh show ltm policy command is executed when a virtual server with an L7 policy attached is present.

one more condition -
Retrieving the ltm policy statistics will cause the umem_alloc_16 memory leak

Impact:
Memory leak for umem_alloc_16 cur_allocs for each request for
each request of tmsh show ltm policy

Workaround:
None

Fix:
Umem_alloc_16 cur_allocs no longer leaking memory.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1072197-1 : Issue with input normalization in WebSocket.

Links to More Info: K94142349, BT1072197

Component: Application Security Manager

Symptoms:
Under certain conditions, attack signature violations might not be triggered in WebSocket scenario.

Conditions:
- ASM handles WebSocket flow.
- Malicious WebSocket message contains specific characters.

Impact:
Attack detection is not triggered as expected.

Workaround:
N/A

Fix:
Attack detection is now triggered as expected.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1072057-1 : "ANY" appears despite setting an IP address or host as the source in Security->Network Firewall->Policy.

Links to More Info: BT1072057

Component: Advanced Firewall Manager

Symptoms:
The GUI incorrectly displays the sources address in certain conditions.

1. If the source address of a firewall policy is not empty (that is, some specific IP addresses available to the rule), the word "Any" is displayed.
2. If the source address is empty (that is, no specific IP addresses exist), nothing (empty) is displayed.

Conditions:
Viewing a firewall policy in the GUI via Security > Firewall > policy.

Impact:
No functional impact

Workaround:
N/A

Fix:
Fixed a display issue with the source address field.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1071689-1 : SSL connection not immediately closed with HTTP2 connection and lingers until idle timeout

Links to More Info: BT1071689

Component: Local Traffic Manager

Symptoms:
SSL connections using HTTP/2 are not immediately closed and linger until the idle timeout expires.

Conditions:
This occurs during SSL handshake termination from the client to the BIG-IP system.

Impact:
SSL connection does not close.

Fix:
System will properly terminate the connection without lingering until timeout

Fixed Versions:
17.0.0, 16.1.3


1071621-1 : Increase the number of supported traffic selectors

Links to More Info: BT1071621

Component: TMOS

Symptoms:
There is an imposed limit of 30 traffic selectors that can be attached to an IPsec policy / IKEv2 ike-peer.

Conditions:
-- IKEv2
-- More than 30 traffic selectors required on one IPsec policy / ike-peer.

Impact:
No more than 30 traffic selectors can be added to a single IPsec policy / ike-peer.

Workaround:
None

Fix:
The behavior of sys db ipsec.maxtrafficselectors has changed.

- Max traffic selectors associated with an ike-peer are increased from 30 to 100.

- When the sys-db variable is non-zero, the limit is enforced.

Warning: Adding hundreds or thousands of traffic-selectors to an ipsec-policy may result in slow config-load times (for example, during startup). An excessive number of traffic selectors may also slow down IPsec tunnel negotiation. The impact will depend on the BIG-IP system's provisioning and the overall configuration.

- ipsec.maxtrafficselectors can be set to "0" to indicate there is no limit.

Behavior Change:
The behavior of sys db ipsec.maxtrafficselectors has changed.

- Max traffic selectors associated with an ike-peer are increased from 30 to 100.

- When the sys-db variable is non-zero, the limit is enforced.

- ipsec.maxtrafficselectors can be set to "0" to indicate there is no limit.

Warning: Adding hundreds or thousands of traffic-selectors to an ipsec-policy may result in slow config-load times (for example, during startup). An excessive number of traffic selectors may also slow down IPsec tunnel negotiation. The impact will depend on the BIG-IP system's provisioning and the overall configuration.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1


1071609-2 : IPsec IKEv1: Log Key Exchange payload in racoon.log.

Links to More Info: BT1071609

Component: TMOS

Symptoms:
The key exchange payload is not logged to the IPsec logs.

Conditions:
The issue is observed during IKEv1 tunnel establishment.

Impact:
If you are investigating the IKEv1 key calculation, the key exchange payload information will not be available.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1071593-4 : TMM may crash while processing TLS traffic

Links to More Info: K16852653, BT1071593


1071585-1 : BIG-IP system does not respond to an arp from a SelfIP configured in virtual wire mode

Links to More Info: BT1071585

Component: Local Traffic Manager

Symptoms:
BIG-IP system does not respond to an arp from a SelfIP configured in virtual wire mode in Virtual Edition platforms.

Conditions:
Configure network in virtual wire mode in VADC pltaform

Impact:
Virtual server traffic is disrupted.

Workaround:
None

Fix:
Fix for the ARP not getting resolved when BIG-IP is configured with selfip on vwire's while redirecting to a different tmm.

Fixed Versions:
17.0.0, 16.1.2.2


1071485-3 : For IP based bypass, Response Analytics sends RST.

Links to More Info: BT1071485

Component: Access Policy Manager

Symptoms:
When SSL takes a dynamic bypass action (IP based bypass decision), the Per-Request Policy agents skip execution when necessary. That is, Category Lookup exits early due to no data because of the early bypass. The same check is not present in Response Analytics and URL Filter agents so that they don't take the error path due to not seeing Category Lookup data.

Conditions:
IP based bypass (in client SSL profile) with Response Analytics or URL Filtering in the Per-Request Policy.

Impact:
Category Lookup skips execution due to IP based bypass and thus Response Analytics and URL Filtering do not have the necessary data, so they take an internal error path. This will cause an RST.

Workaround:
Do not add Response Analytics or URL Filtering agents to paths that you know will not have appropriate Category Lookup data due to bypass.

Fix:
When the SSL level filter bypasses based on client data, Per-Request Policy agents will now be appropriately bypassed as well if there is not enough data to run on. They will take the fallback branches instead of sending a RST on error.

Fixed Versions:
17.0.0, 16.1.3.1


1071449-4 : The statsd memory leak on platforms with license disabled processors.

Links to More Info: BT1071449

Component: Local Traffic Manager

Symptoms:
Memory usage in statsd will continue to grow until the control-plane is out of memory.

Conditions:
This issue occurs when the license on the BIG-IP disables some of the processors.

Following are the affected platforms:

C123 = iSeries i11000 - Discovery Extreme
C124 = iSeries i11000-DS - Discovery Extreme Turbo

Impact:
The statsd may consume excessive memory causing OOM killer activity.

Workaround:
Restart statsd periodically.

Fix:
The statsd no longer leaks memory.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1071365-5 : iControl SOAP WSDL hardening

Links to More Info: K59904248, BT1071365


1071301-1 : GTM server does not get updated even when the virtual server status changes.

Links to More Info: BT1071301

Component: Global Traffic Manager (DNS)

Symptoms:
GTM Server is in an Unknown state even though the single virtual server is green.

Conditions:
-- Three-member sync group.
-- Create a large number of virtual servers.
-- Virtual servers are disabled and enabled.

Impact:
The server status does not reflect the virtual server status, and there is no obvious way to recover.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1071269 : SSL C3D enhancements introduced in BIG-IP version 16.1.3 will not be available in 17.0.0.

Links to More Info: BT1071269

Component: Local Traffic Manager

Symptoms:
The SSL C3D enhancements and features were introduced in BIG-IP version 16.1.3. If the feature is enabled in 16.1.3 and you upgrade to version 17.0.0, all of the following SSL C3D features will not be available, and the upgrade will fail:
- SSL C3D ability to convert RDN values to PrintableString or UTF-8 encoding.
- SSL C3D ability to modify CN in forged client certificate subject.
- SSL C3D ability to add custom SAN extension to the forged client certificate.
- SSL C3D ability to add AKI extension to the forged client certificate.

Conditions:
In the following conditions:
1. The BIG-IP config in 16.1.3 uses any of the two new iRules namely 'SSL::c3d subject' and 'X509::subject <cert> commonName'.
2. Upgrading to BIG-IP version 17.0.0

Impact:
Upgrade fails. You are unable to use any SSL C3D enhancements and features.

Workaround:
Workaround 1: Remove any config that had the SSL C3D feature enabled and caused the upgrade failure.

Workaround 2: If you require C3D features, upgrade to a release that supports them.

Fix:
N/A

Fixed Versions:
16.1.3


1071233-1 : GTM Pool Members may not be updated accurately when multiple identical database monitors are configured

Links to More Info: BT1071233

Component: Global Traffic Manager (DNS)

Symptoms:
When two or more GTM database monitors (MSSQL, MySQL, PostgreSQL, and Oracle) with identical 'send' and 'recv' strings are configured and applied to different GTM pools (with at least one pool member in each), the monitor status of some GTM pool members may not be updated accurately.

Other parameters of the affected monitors that differ (such as 'recv row' or 'recv column' indicating where the specified 'recv' string should be found in the result set) may cause GTM pool members using one of the affected monitors to connect to the same database to be marked UP, while GTM pool members using another affected monitor may be marked DOWN.

As a result of this issue, GTM pool members that should be marked UP or DOWN by the configured GTM monitor may instead be marked according to another affected monitor's configuration, resulting in the affected GTM pool members being intermittently marked with an incorrect state.

After the next monitor ping interval, affected GTM pool members members may be marked with the correct state.

Conditions:
This may occur when multiple GTM database monitors (MSSQL, MySQL, PostgreSQL, and Oracle) are configured with identical 'send' and 'recv' parameters, and applied to different pools/members which share the same IP address and Port values.

For example:
gtm monitor mysql mysql_monitor1 {
...
    recv none
    send "select version();"
...
}
gtm monitor mysql mysql_monitor2 {
...
    recv none
    send "select version();"
...
}

Impact:
Monitored GTM pool members using a database monitor (MSSQL, MySQL, PostgreSQL, and Oracle) randomly go offline/online.

Workaround:
To avoid this issue, configure each GTM database monitor with values that make the combined parameters unique by changing either the 'send' or the 'recv' parameters, or both.

For example:
gtm monitor mysql mysql_monitor1 {
...
    recv none
    send "select version();"
...
}
gtm monitor mysql mysql_monitor2 {
...
    recv 5.7
    send "select version();"
...
}

Fix:
The system updates GTM pool members correctly when multiple identical database monitors are configured.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1071181-2 : Improving Signature Detection Accuracy

Links to More Info: BT1071181

Component: Anomaly Detection Services

Symptoms:
BADOS generates signatures have up to 20% false positive if the signature covers 100% of bad traffic.

Conditions:
The attack signature generated covers all bad traffic.

Impact:
BADOS generates false positives

Workaround:
None

Fix:
This feature has been removed.

Fixed Versions:
16.1.2.2, 15.1.6.1, 14.1.5


1070833-2 : False positives on FileUpload parameters due to default signature scanning

Links to More Info: BT1070833

Component: Application Security Manager

Symptoms:
False positives on FileUpload parameters due to signature scanning by default

Conditions:
A request containing binary content is sent in "FileUpload" type parameters

Impact:
False positives and ineffective resource utilization

Workaround:
Disable signature scanning on "FileUpload" parameters manually using GUI/REST.

Fix:
Default signature scanning is disabled for FileUpload parameters created using OpenAPI to reduce false positives on binary content.

Fixed Versions:
16.1.3, 15.1.6.1


1070789 : SSL fwd proxy invalidating certificate even through bundle has valid CA

Links to More Info: BT1070789

Component: Local Traffic Manager

Symptoms:
BIG-IP system rejects SSL forward proxy connections due to expired CA certificates present in ca-bundle even though other, valid CA certificates exist.

Conditions:
-- Forward proxy is enabled in client and server SSL profiles.
-- A valid CA certificate is followed by an expired CA certificate in ca-bundle.

Impact:
SSL handshakes will fail.

Workaround:
Remove all invalid trusted (i.e., expired) certificates from the certificate chain and replace them with a valid trusted certificate.

Fix:
Fixed the certificate verification issue that was leading to SSL handshake failure.

Fixed Versions:
16.1.3.1


1070677-1 : Learning phase does not take traffic into account - dropping all.

Links to More Info: BT1070677

Component: Protocol Inspection

Symptoms:
Suggestions are generated every suggestion interval and every suggestion interval suggestions are overriding, so the last suggestion is considered after the staging period is completed.

Conditions:
Once the start of staging period, suggestions will override every time until the staging period completes.

Impact:
IPS learning phase, which lasts the default 7 days, sees a ton of traffic from websites hitting against signatures, but at the end of the 7 days it blocks all signatures and causes an outage.

Workaround:
N/A

Fix:
We now make the decision based on the overall suggestions that are generated during the staging period instead of the last suggestion.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1070273-1 : OWASP Dashboard does not calculate Disallow DTDs in XML content profile protection properly.

Links to More Info: BT1070273

Component: Application Security Manager

Symptoms:
On OWASP dashboard, both 2021 and 2017, the Disallow DTDs in XML content profile protection is not calculated correctly on the xml-profile allowDTD field.

Conditions:
Open the OWASP page for any non-parent/child security policy, (Security ›› Overview : OWASP Compliance). For OWASP 2017, DTDs is located under A4 category, and for 2021 under A5 category.

Impact:
Actual OWASP compliance for this protection can be different from the one shown by the GUI.

Workaround:
The actual conditions that satisfy the Disallow DTDs in XML content profile protection are:

1. 'XML data does not comply with format settings' violation should be set to alarm+block.

2. 'Malformed XML data' violation should be set to alarm + block.


3. No XML content profile in the policy is set so that allowDTDs to true.

Fix:
Scoring calculation was changed: Now score will be given only if no XML content profile in the policy has allowDTDs field set as true.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1070009 : iprepd, icr_eventd and tmipsecd restarts continuously after installing FIPS 140-3 license in BIG-IP cloud platform

Links to More Info: BT1070009

Component: TMOS

Symptoms:
32 bit applications (iprepd, icr_eventd and tmipsecd) uses clock_gettime to gather the time which causes the restart of applications. This issue occurs only in Azure and Google Cloud platform when FIPS 140 license is installed.

Conditions:
- Occurs only in Azure and Google Cloud platform
-32 bit applications (iprepd, icr_eventd and tmipsecd) which uses clock_gettime to gather the time for generating entropy data
- A FIPS 140 license is installed

Impact:
Applications restart continuously.

Workaround:
None.

Fix:
32-bit applications does not restart continuously while using clock_gettime to generate entropy data when FIPS 140 license is installed.

Fixed Versions:
17.0.0, 16.1.2.2


1069629-4 : TMM may crash while processing TLS traffic

Links to More Info: K16852653, BT1069629


1069501-1 : ASM may not match certain signatures

Links to More Info: K22251611, BT1069501

Component: Application Security Manager

Symptoms:
Under certain condition, ASM may not match signatures as expected.

Conditions:
- base64 violations not configured for blocking

Impact:
Signatures not matched as expected.

Workaround:
Illegal base64 value violation should be set to blocking.
This way if Base64 decoding fails the requests gets blocked.

Fix:
ASM now processes signature as expected.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1069449-1 : ASM attack signatures may not match cookies as expected

Links to More Info: K39002226, BT1069449

Component: Application Security Manager

Symptoms:
Under certain conditions ASM attack signatures may not match cookies as expected.

Conditions:
- Specially crafted cookies

Impact:
Attack signatures are not detected as expected.

Workaround:
N/A

Fix:
ASM attack signatures now match cookies as expected.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1069133-4 : ASMConfig memory leak

Links to More Info: BT1069133

Component: Application Security Manager

Symptoms:
A slow leak exists for long-lived asm_config_handler processes that handle configuration updates.

Conditions:
Configuration updates are being regularly made.

Impact:
Processes slowly grow in size until they reach a limit and restart themselves.

Workaround:
N/A

Fix:
The slow leak has been fixed.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1068821 : TMM may crash when processing AFM NAT64 policy

Links to More Info: K00721320, BT1068821


1068561-1 : Can't create key on the second netHSM partition.

Links to More Info: BT1068561

Component: Local Traffic Manager

Symptoms:
While trying to create a key pair in a second partition, the key creation fails.

Conditions:
-- Multiple partitions are used
-- Attempt to create a key with the second partition

Impact:
Unable to use multiple netHSM partitions.

Workaround:
N/A

Fix:
Corrected session handle able to create keys in second partition.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1068445-1 : TCP duplicate acks are observed in speed tests for larger requests

Links to More Info: BT1068445

Component: Local Traffic Manager

Symptoms:
- A lot of TCP duplicate acks are observed in speed tests for larger requests

Conditions:
Below conditions are met
- Large request
- fastL4 profile with PVA acceleration set
- Below sys db variables are enabled
tm.tcpsegmentationoffload
tm.tcplargereceiveoffload
- Softpva is used

Impact:
- Reduced throughput because of duplicate ACKs and retransmissions

Workaround:
Either one of the conditions
- fastL4 profile with PVA acceleration set to NONE
- Disable below sys db variables
tm.tcpsegmentationoffload
tm.tcplargereceiveoffload

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1068353-1 : Unexpected event sequence may cause HTTP/2 flow stall during shutdown

Links to More Info: BT1068353

Component: Local Traffic Manager

Symptoms:
HTTP/2 flows may stall during shutdown, eventually being freed by expiration or reset from the TCP peer.

Conditions:
HTTP/2 configured

Impact:
Flows may be retained longer than expected and continue to consume system resources until expired or reset by the TCP peer.

Workaround:
None

Fix:
Shutdown events are now handled correctly for HTTP/2 flows.

Fixed Versions:
16.1.2.2


1068237-1 : Some attack signatures added to policies are not used.

Links to More Info: BT1068237

Component: Application Security Manager

Symptoms:
Some attack signatures added to an existing signature set may not be utilized by Policies associated with the signature set, despite the attack signatures being reported as now present in the Policies.

Conditions:
1. Have one or more policies utilizing a manual attack signature set.

2. Update the attack signature database by installing an ASU or creating a custom attack signature.

3. Update the previously created manual attack signature set with one or more attack signatures which were not updated by the ASU (if ASU installed) or are not the newly created custom attack signature (if new custom signature created).

Impact:
The additional attack signatures added to the attack signature set will show up in the Policies utilizing the signature set however the Policies will not actually use those additional attack signatures.

Workaround:
There are two workarounds:

1. When adding additional attack signatures to a Policy, place them in a new attack signature set rather than re-using an existing signature set.

2. If adding signatures to an existing set, afterwards create a new custom attack signature, add it to a new manual attack signature set, add the set to any active policy and then remove the set from the policy (the set and signature can then be deleted if desired).

Both workarounds will result in all attack signatures listed as present in all Policies being fully and properly utilized by the Policies.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1067993-4 : APM Windows Client installer hardening

Links to More Info: K54460845, BT1067993


1067617-4 : BGP default route not advertised after mid-session OPEN.

Links to More Info: BT1067617

Component: TMOS

Symptoms:
After BGP peer opens a new session with BIG-IP in the middle of the existing session and the session is dropped, BIG-IP does not send default route NLRI to the peer when the new session is established.

Conditions:
Mid-session OPEN (Event 16 or Event 17 per RFC spec).

Impact:
Default route is missing on a BGP peer.

Workaround:
Clear the BGP session manually.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1067505-4 : TMM may crash while processing TLS traffic with HTTP::respond

Links to More Info: K59197053, BT1067505


1067285-1 : Re-branding - Change 'F5 Networks, Inc.' to 'F5, Inc.'

Links to More Info: BT1067285

Component: Application Security Manager

Symptoms:
F5 Networks, Inc.
F5 Networks Inc.
F5 Networks appear as F5, Inc.

Conditions:
NA

Impact:
F5 Networks, Inc
F5 Networks
F5 Networks Inc will appear as F5, Inc to the end user, be it online help, or any ASM related screens.

Workaround:
NA

Fix:
F5 Networks, Inc
F5 Networks
F5 Networks Inc will appear as F5, Inc to the end user, be it online help, or any ASM related screens.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1067105-2 : Racoon logging shows incorrect SA length.

Links to More Info: BT1067105

Component: TMOS

Symptoms:
Debug2 logs incorrect "total SA" length in racoon.log.

Conditions:
-- IKEv1 tunnels in use
-- ikedaemon in debug2 mode

Impact:
Troubleshooting is confused by misleading information about the SA payload length.

Workaround:
None. This is a cosmetic / logging issue.

Fix:
Clarified the log message to indicate what the logged length actually covers.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1066829-1 : Memory leak for xml/json auto-detected parameter with signature patterns.

Links to More Info: BT1066829

Component: Application Security Manager

Symptoms:
A memory leak is observed in ASM when specific traffic arrives.

Conditions:
A request contains a JSON parameter value with the signature pattern.

Impact:
Memory leak in the system.

Workaround:
N/A

Fix:
No memory leak observed after the fix.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1066729-1 : TMM may crash while processing DNS traffic

Links to More Info: K85054496, BT1066729


1066673-1 : BIG-IP Configuration Utility(TMUI) does not follow best practices for managing active sessions

Links to More Info: K55580033, BT1066673


1066377-1 : OpenAPI - Content profile is not consistent with wildcard configuration

Links to More Info: BT1066377

Component: Application Security Manager

Symptoms:
A content profile is created with an inconsistent order for wildcard content types.

Conditions:
-- Create OpenAPI policy
-- Configure any endpoint with multiple wildcard content types

Impact:
HTTP request body is not enforced properly

Workaround:
None

Fix:
Fix provided to create content profile with proper order for wild card content type

Fixed Versions:
17.0.0, 16.1.2.2


1066285-4 : Master Key decrypt failure - decrypt failure.

Links to More Info: BT1066285

Component: TMOS

Symptoms:
After MCPD restarts or the system reboots:
-- the system is inoperative and MCPD may be restarting
-- the logs report this error:

err mcpd[12444]: 01071769:3: Decryption of the field (value) for object (config.auditing.forward.sharedsecret) failed while loading configuration that is encrypted with a different master key.

-- the system may be reporting this error:

load_config_files[5635]: "/usr/bin/tmsh -n -g -a load sys config partitions all " - failed. -- Error: failed to reset strict operations; disconnecting from mcpd. Will reconnect on next command.

This may occur during a system upgrade.

Conditions:
When config.auditing.forward.sharedsecret is encrypted and masterkey value is changed.

Impact:
MCPD will continuously restart, and the system will remain inoperative.

Workaround:
If a system is affected by this issue, set the DB key back to its default value. Once the configuration is loaded, set the DB key back to the correct value:

   - tmsh modify /sys db config.auditing.forward.sharedsecret value '<null>'


After changing the SecureValue master key but before encountering the issue, run the following command to update the value of the DB key on-disk:

    setdb config.auditing.forward.sharedsecret "$(getdb config.auditing.forward.sharedsecret)"

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1065917-2 : BIG-IP APM Virtual Server does not follow security best practices

Component: Access Policy Manager

Symptoms:
BIG-IP APM Virtual Server with an associated access policy does not follow security best practices when handling authenticated user traffic

Conditions:
APM Access Policy assigned to a Virtual Server
A valid, logged in user

Impact:
APM virtual server allows a malicious authenticated user to cause APM to mis-handle specific requests

Fix:
BIG-IP APM virtual server now correctly follows security best practices.

Fixed Versions:
16.1.3.3, 15.1.7


1065789-1 : TMM may send duplicated alerts while processing SSL connections

Component: Local Traffic Manager

Symptoms:
Under certain conditions, TMM may send duplicated SSL alerts while processing encrypted connections.

Conditions:
- Fatal SSL error

Impact:
Increased resource usage, potentially leading to degraded performance.

Workaround:
N/A

Fix:
SSL alerts are now processed as expected.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5


1065585-1 : System does not halt on on FIPS/entropy error threshold for BIG-IP Virtual Edition

Links to More Info: BT1065585

Component: TMOS

Symptoms:
BIG-IP Virtual Edition keeps running even after multiple FIPS/entropy errors occur.

Conditions:
Multiple FIPS/entropy errors on BIG-IP Virtual Edition system.

Impact:
BIG-IP Virtual Edition keeps running even after multiple FIPS/entropy errors occur

Workaround:
None

Fix:
System should halt after the threshold number of FIPS/entropy errors occue

Fixed Versions:
17.0.0, 16.1.2.2


1064669-1 : Using HTTP::enable iRule command in RULE_INIT event might cause TMM to crash.

Links to More Info: BT1064669

Component: Local Traffic Manager

Symptoms:
TMM crashes if an iRule is configured that has HTTP::enable in the RULE_INIT event.

Conditions:
iRule that uses HTTP:enable command in RULE_INIT event, for example:

ltm rule example_rule {
    when RULE_INIT {
        # Don't do this!
        HTTP::enable
    }
}

Impact:
Traffic disrupted while TMM restarts.

Workaround:
Do not use the HTTP::enable iRule command in the RULE_INIT event.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5


1064617-1 : DBDaemon process may write to monitor log file indefinitely

Links to More Info: BT1064617

Component: Local Traffic Manager

Symptoms:
If debug logging is enabled for a database monitor (mssql, mysql, postgresql or oracle), the DBDaemon process may write to a monitor log file indefinitely, including after the monitor log file is rotated and/or deleted.

Conditions:
This problem may occur when:
- using a database monitor (mssql, mysql, postgresql or oracle) which is configured with the "debug" value set to "yes"
- using a database monitor (mssql, mysql, postgresql or oracle) for a pool member which is configured with the "logging" set to "enabled"

Impact:
The DBDaemon process may write debug logging messages to the affected monitor log file indefinitely, including after the monitor log file has been rotated and/or deleted.
As a result, storage in the /var/log volume may be consumed to the point that other logging cannot be performed, and the BIG-IP instance may be restarted/rebooted.

Workaround:
To work around this issue, restart the DBDaemon process.

To find the PID of the DBDaemon process, observe the output of the following command:
ps -ef |grep -v grep | grep DB_monitor.jar | awk '{print($2)}'

To confirm whether the DBDaemon process is writing to a monitor log file, and if so, which file:
lsof -p $(ps -ef | grep -v grep | grep DB_monitor.jar | awk '{print($2)}') | grep -e COMMAND -e '/var/log/monitors'

To kill the DBDaemon process:
kill $(ps -ef | grep -v grep | grep DB_monitor.jar | awk '{print($2)}')

NOTE:
Killing the DBDaemon process will cause a short-term loss of database monitoring functionality, until DBDaemon is restarted by the next database monitor probe.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1064461-4 : PIM-SM will not complete RP registration over tunnel interface when floating IP address is used.

Links to More Info: BT1064461

Component: TMOS

Symptoms:
PIM-SM will not complete rendezvous point (RP) registration over the tunnel interface when a floating IP address is used (ip pim use-floating-address). Join/prune from RP gets dropped on BIG-IP when doing local-address validation.

BIG-IP never completes registration successfully.

Conditions:
RP registration over tunnel interface when floating IP address is used.

Impact:
BIG-IP never completes registration and outgoing packets are register-encapsulated.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1064357-1 : execute_post_install: EPSEC: Installation of EPSEC package failed

Links to More Info: BT1064357

Component: TMOS

Symptoms:
APM EPSEC installation fails and an error message is logged in /var/log/ltm: "execute_post_install: EPSEC: Installation of EPSEC package failed"

Conditions:
APM EPSEC package installation

Impact:
Installation fails with an error message

Fixed Versions:
17.0.0, 16.1.3, 15.1.7


1064217-1 : Port bit not set correctly in the ipv6 destination address with 1:8 mapping for CGNAT MAP-T.

Links to More Info: BT1064217

Component: Carrier-Grade NAT

Symptoms:
Port bits are not set as expected in the ipv6 destination address with 1:8 mapping for CGNAT MAP-T.

Conditions:
This occurs in a MAP-T configuration.

Impact:
MAP-T port translation does not work as expected.

Workaround:
N/A

Fix:
Fixed an issue with the port bit not being set correctly.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1064189-1 : DoH proxy and server listeners from GUI with client-ssl profile and server-ssl profile set to None produces undefined warning

Links to More Info: BT1064189

Component: Global Traffic Manager (DNS)

Symptoms:
Dns Over HTTPS (DOH) is allowed to work without a clientssl profile on clientside. Setting it to none disables the DNS resolution via the HTTPS protocol.

Conditions:
- Selecting "None" in Client SSL Profile and Server SSL Profile in DOH Server Listener and DOH Proxy Listener from GUI

Impact:
An error occurs:
GUI: 01020036:3: The requested profile (/Common/NO_SELECTION) was not found.
TMSH: 01070734:3: Configuration error: In Virtual Server (/Common/mydohproxylistener) http2 specified activation mode requires a client ssl profile

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2


1064157-1 : Http_proxy_opaque_get should constrain search to local/spawn flows, not looped flows

Links to More Info: BT1064157

Component: Local Traffic Manager

Symptoms:
In a VIP-on-VIP (looped) situation, HTTP on one virtual server uses/reuses an existing 'http_proxy_opaque' whilst still in use by another virtual server that causes unexpected state changes in the opaque which may cause tmm to core.

Conditions:
-- Explicit Forward Proxy SSL Orchestrator, in other words an L3 Explicit Proxy which is usually deployed in a VIP on VIP configuration
-- Hostname resolution using explicit 'RESOLV::lookup' iRule in HTTP_PROXY_REQUEST on the explicit/client-facing VIP

Impact:
Traffic disrupted while tmm restarts.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1063977-3 : Tmsh load sys config merge fails with "basic_string::substr" for non-existing key.

Links to More Info: BT1063977

Component: Local Traffic Manager

Symptoms:
"tmsh load sys config merge" fails with the following error.

Loading configuration...
  /var/tmp/repro.txt
01070711:3: basic_string::substr
Unexpected Error: Loading configuration process failed.

Conditions:
The key referenced in the configuration of the SSL profile does not exist in the BIG-IP.

Impact:
"tmsh load sys config merge" fails which is expected, but the error is not meaningful.

Workaround:
Identify the missing SSL key used in the configuration and correct it.

Fix:
You should now be able to see the error message "The requested certificate (<Cert Name>) was not found." or "The requested certificate (<Key Name>) was not found." if a non-existing key is used in the configuration.

Fixed Versions:
16.1.3


1063641-4 : NTLM library hardening

Links to More Info: K23465404, BT1063641


1063637-4 : NTLM library hardening

Links to More Info: K23465404, BT1063637


1063453-1 : FastL4 virtual servers translating between IPv4 and IPv6 may crash on fragmented packets.

Links to More Info: BT1063453

Component: Local Traffic Manager

Symptoms:
Tmm crashes while passing IPv4-to-IPv6 traffic over FastL4.

Conditions:
-- A FastL4 virtual server translates between IPv4 and IPv6.
-- Fragment reassembly is not enabled in the FastL4 profile.
-- A feature requiring asynchronous completion is configured including: asynchronous irules on LB events (LB_SELECTED, LB_FAILED, LB_PERSIST_DOWN, LB_QUEUED, SA_PICKED), persistence, sessiondb operations, HA, virtual rate limiting.

Impact:
All traffic is disrupted while the TMM restarts.

Workaround:
Configure the FastL4 profile to always reassemble fragments.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1063389-6 : open-vm-tools vulnerability: CVE-2015-5191

Links to More Info: K84583382, BT1063389


1063345-5 : Urldbmgrd may crash while downloading the database.

Links to More Info: BT1063345

Component: Access Policy Manager

Symptoms:
Urldbmgrd may crash while downloading the database.

Conditions:
SWG or URLDB is provisioned.

Impact:
User traffic will be impacted when urldbmgrd is down.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.3.1


1062569-1 : HTTP/2 stream bottom filter leaks memory at teardown under certain conditions

Component: Local Traffic Manager

Symptoms:
Xhead/xdata allocations increase over time and do not return to initial levels.

Conditions:
-HTTP/2 MRF Virtual Server with client-side HTTP/2.
-HTTP/2 undisclosed clientside requests

Impact:
Memory leakage

Workaround:
N/A

Fix:
N/A

Fixed Versions:
16.1.3.3


1062513-4 : GUI returns 'no access' error message when modifying a GTM pool property.

Links to More Info: BT1062513

Component: Global Traffic Manager (DNS)

Symptoms:
When you modify a GTM pool property and then click "Update," the next page displays the error message "No access."

When you modify GTM pool properties using the GUI, the properties do not update or display.

Conditions:
This occurs when you modify a GTM pool property using the GUI.

Impact:
You cannot change a GTM pool property using the GUI.

Workaround:
Use TMSH to change the GTM pool property.
OR
Click on "Update" a second time in the GUI.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1062493-1 : BD crash close to it's startup

Links to More Info: BT1062493

Component: Application Security Manager

Symptoms:
BD crashes shortly after startup.

Conditions:
FTP or SMTP are in use. Other causes are unknown.

Impact:
Traffic disrupted while bd restarts.

Workaround:
No workaround except removal of the FTP/SMTP protection.

Fix:
Crashes close to startup coming from SMTP or FTP were fixed.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1062333-6 : Linux kernel vulnerability: CVE-2019-19523

Component: TMOS

Symptoms:
A flaw was found in the Linux kernel’s implementation for ADU devices from Ontrak Control Systems, where an attacker with administrative privileges and access to a local account could pre-groom the memory and physically disconnect or unload a module.

Conditions:
The attacker must be able to access either of these two events to trigger the use-after-free, and then race the access to the use-after-free, to create a situation where key USB structs can be manipulated into corrupting memory.

Impact:
An attacker could pre-groom the memory and physically disconnect or unload a module.

Workaround:
N/A

Fix:
Kernel patched to mitigate CVE-2019-19523

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1061797-1 : Upgraded AWS CloudFormation Helper Scripts which now support IMDSv2

Links to More Info: BT1061797

Component: TMOS

Symptoms:
For AWS's CloudFormation to work with IMDSv2, the Helper Script module had to be upgraded.

Conditions:
Using AWS CloudFormation for IMDSv2-only instances

Impact:
The Helper scripts throw a "No Handler found" error when used to launch IMDSv2 instances

Fix:
With the latest version of BIG-IP VE, you can now launch IMDSv2 instances using AWS's CloudFormation templates.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1061617-4 : Some of the URL Attack signatures are not detected in the URL if "Handle Path Parameters" is configured "As Parameters".

Links to More Info: BT1061617

Component: Application Security Manager

Symptoms:
The following Attack Signatures are not identified if "Handle Path Parameters" = "As Parameters".
200001660, 200001663, 200007032, 200101543, 200101632, 200101635, 200101638, 200101641, 200101644

Conditions:
- Configure "Handle Path Parameters" = "As Parameters"
 - Enable URL attack signatures 200001660, 200001663, 200007032, 200101543, 200101632, 200101635, 200101638, 200101641, 200101644

Impact:
Some URL attack signatures are not detected by ASM.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1061481-1 : Denied strings were found in the /var/log/ folder after an update or reboot

Links to More Info: BT1061481

Component: TMOS

Symptoms:
Denied strings error message were found in /var/log/dmesg and /var/log/messages files after update or reboot.

For example, the string "denied" was found:[ 5.704716] type=1401 audit(1636790175.688:4): op=security_bounded_transition seresult=denied oldcontext=system_u:system_r:init_t:s0 newcontext=system_u:system_r:f5_jitter_entropy_t:s0

Conditions:
After update or reboot, check the following log files:
/var/log/dmesg and /var/log/messages.

Impact:
Error strings are observed in /var/log/dmesg and /var/log/messages.

Workaround:
None.

Fix:
No error strings are observed.

Fixed Versions:
17.0.0.1, 16.1.3


1060989 : Improper handling of HTTP::collect

Links to More Info: BT1060989

Component: Local Traffic Manager

Symptoms:
When a complete body has been received and a new HTTP::collect is attempted, an error occurs:

TCL error: /Common/rule_vs_server_15584 <HTTP_RESPONSE_DATA> - ERR_ARG (line 1) invoked from within "HTTP::collect 256000"

Conditions:
- HTTP Virtual server
- incremental HTTP::collect irule

Impact:
iRule failure

Workaround:
None

Fixed Versions:
16.1.3.1


1060933-1 : Issue with input normalization.

Links to More Info: K49237345

Component: Application Security Manager

Symptoms:
Under certain conditions, attack signature violations may not be triggered.

Conditions:
- ASM provisioned with XML content profile
- Request contains XML body

Impact:
Attack detection is not triggered as expected.

Workaround:
None

Fix:
Attack detection is now triggered as expected.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1060625-1 : Wrong INTERNAL_IP6_DNS length.

Links to More Info: BT1060625

Component: TMOS

Symptoms:
Tunnel establishment fails when an IPv6 DNS IP address is provided in the IKE_AUTH payload. As per RFC it should be 16 octets, but BIG-IP sends 17 octets(that is, it tries to provide the subnet info also).

Conditions:
Initiator requests an IPv6 DNS IP during tunnel negotiation.

Impact:
Tunnel will not establish.

Workaround:
None

Fix:
The INTERNAL_IP6_DNS payload is now filled with only the IPv6 address (the subnet is excluded).

Fixed Versions:
17.0.0, 16.1.2.2


1060409-2 : Behavioral DoS enable checkbox is wrong.

Links to More Info: BT1060409

Component: Anomaly Detection Services

Symptoms:
Behavioral DoS Enabled indicator is wrongly reported after configuration change, when no traffic is injected to the virtual server.

Conditions:
Behavioral DoS is enabled and then disabled when no traffic is injected to the virtual server.

Impact:
After server health is stabilized and constant, the BIG-IP system doesn't report the configuration changes.

Workaround:
Send 1-2 requests to the server and the configuration will be updated.

Fix:
Behavioral DoS enabled/disabled flag is now reported correctly.

Fixed Versions:
16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1060149-2 : BIG-IP vCMP guest data-plane failure with turboflex-adc selected on the host.

Links to More Info: BT1060149

Component: TMOS

Symptoms:
-- Interfaces in the vCMP guest may remain uninitialized.
-- 'Invalid VCMP PDE state version' log in /var/log/tmm*.

Conditions:
-- BIG-IP i5xxx/i7xxx/i10xxx/i11xxx platform.
-- vCMP provisioned.
-- turboflex-adc profile selected.

Impact:
Affected guest is non-functional.

Workaround:
Use the turboflex-base profile.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1059853 : Long loading configuration time after upgrade from 15.1.3.1 to 16.1.2.

Links to More Info: BT1059853

Component: TMOS

Symptoms:
Tmsh load sys config/tmsh load sys config verify takes much longer (~10x).

Conditions:
While loading config tmsh load sys config verify.

Impact:
Configuration loading takes a long time (more than 8 minutes).

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2


1059621-2 : IP Exceptions feature and SSRF feature do not work as expected if both the entries are configured with the same IP/IPs.

Links to More Info: BT1059621

Component: Application Security Manager

Symptoms:
IP Exceptions/SSRF does not work as expected if the same IPs are configured in both IP Exception and SSRF.

Conditions:
- Enable XFF Header.
- Configure same IP/IPs in both SSRF and IP Exceptions.
- Send traffic with xff header and URI parameter.

Impact:
One of the IP Exceptions or SSRF features do not work as expected.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2


1059185-1 : iControl REST Hardening

Links to More Info: K81952114, BT1059185


1059165-1 : Multiple virtual server pages fail to load.

Links to More Info: BT1059165

Component: TMOS

Symptoms:
Virtual server-related pages fail to load in the GUI.

Conditions:
This issue is observed only when the DOS module is provisioned.

Impact:
Virtual server properties do not load.

Workaround:
None

Fix:
Virtual Server pages now load successfully.

Fixed Versions:
17.0.0, 16.1.2.2


1059053-2 : Tmm crash when passing traffic over some configurations with L2 virtual wire

Links to More Info: BT1059053

Component: Local Traffic Manager

Symptoms:
In very rare cases, tmm crashes while passing traffic over some configurations with L2 virtual wire.

Conditions:
-- L2 wire setup
-- A routing error occurs

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
Modified code to prevent such crashes.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1058677-2 : Not all SCTP connections are mirrored on the standby device when auto-init is enabled.

Links to More Info: BT1058677

Component: TMOS

Symptoms:
When auto-init is enabled, Not all SCTP connections are mirrored to the standby device.

Conditions:
-- SCTP Profile and Mirroring.
-- Auto initialization is enabled.

Impact:
Only half of the connections are mirrored to the standby device.

Workaround:
Disable auto initialization:

tmsh modify ltm message-routing diameter peer <affected_peer> { auto-initialization disabled }

Fix:
SCTP connections are mirrored successfully to standby device.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1058469-1 : Disabling strict-updates for an iApp service which includes a non-default NTLM profile will cause virtual servers using that profile to stop working.

Links to More Info: BT1058469

Component: Local Traffic Manager

Symptoms:
A virtual server which is part of an iApp service and which was previously working correctly now rejects all traffic.

Upon inspecting the log, entries similar to the following examples may be noticed:

==> /var/log/tmm <==
<13> Oct 28 23:41:36 bigip1 notice hudfilter_init: clientside matches TCP position. 0 0

==> /var/log/ltm <==
Oct 28 23:41:36 bigip1 err tmm[21251]: 01010008:3: Proxy initialization failed for /Common/my.app/my-vs. Defaulting to DENY.
Oct 28 23:41:36 bigip1 err tmm[21251]: 01010008:3: Listener config update failed for /Common/my.app/my-vs: ERR:ERR_UNKNOWN

Conditions:
This issue is known to occur when strict-updates is disabled for an iApp service which includes a non-default NTLM profile.

Impact:
Traffic outage as the affected virtual server(s) no longer passes any traffic.

Workaround:
To recover an affected system, either restart TMM (bigstart restart tmm) or delete and redeploy the iApp service.

To prevent this issue from occurring again, modify the iApp configuration to use the default NTLM profile rather than a custom one (if the iApp template involved allows this).

Fix:
Disabling strict-updates for an iApp service, which includes a non-default NTLM profile, no longer causes virtual servers associated with the profile to suddenly stop working.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1058401-1 : SSL Bypass does not work for inbound traffic

Links to More Info: BT1058401

Component: SSL Orchestrator

Symptoms:
Per-request policy's SSL Bypass Set agent does not bypass TLS traffic for inbound topology.

Conditions:
-- SSL Orchestrator is licensed and provisioned.
-- Per-request policy is attached to interception rules and SSL Bypass Set agent is used in the policy.

Impact:
BIG-IP/SSL Orchestrator does not bypass the TLS traffic for inbound topology.

Fix:
SSL Bypass Set agent in the per-request policy now bypasses TLS traffic for inbound topology.

Fixed Versions:
17.0.0, 16.1.2.2


1058297-2 : Policy history values for 'max Size Of Saved Versions' and for 'min Retained Files In Dir' is reset during upgrade

Links to More Info: BT1058297

Component: Application Security Manager

Symptoms:
The values for "minRetainedFilesInDir" and "maxSizeOfSavedVersions" in /etc/ts/tools/policy_history.cfg
 are set back to default after an upgrade.

Conditions:
-- Non-default values for "minRetainedFilesInDir" and for "maxSizeOfSavedVersions"
-- An upgrade occurs

Impact:
After upgrade, the values in the configuration file are set back to default.

Workaround:
Update the values after the upgrade is complete.

Fix:
The usage of the configuration file /etc/ts/tools/policy_history.cfg is deprecated.

New internal config items have been added:
"policy_history_min_retained_versions" and "policy_history_max_total_size"

The internal variables are preserved during the upgrade.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1057809-6 : Saved dashboard hardening

Links to More Info: K41877405, BT1057809


1057801-6 : TMUI does not follow current best practices

Links to More Info: K70300233, BT1057801


1056993-2 : 404 error is raised on GUI when clicking "App IQ."

Links to More Info: BT1056993

Component: TMOS

Symptoms:
When the App IQ menu option is clicked in the GUI workflow, (GUI: System ›› Configuration >> App IQ) the result is "Not Found. The requested URL was not found on this server."

Conditions:
Clicking the App IQ menu option in the GUI workflow, GUI: System ›› Configuration >> App IQ.

Impact:
Not able to access App IQ page.

Workaround:
Navigate directly to the following page on your BIG-IP (replacing <BIG-IP> with the IP/hostname of the system):

https://<BIG-IP>/tmui/tmui/system/appiq_ng/views/settings.html

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1056957-1 : An attack signature can be bypassed under some scenarios.

Links to More Info: BT1056957

Component: Application Security Manager

Symptoms:
An attack signature is not detected.

Conditions:
A specific condition.

Impact:
False negative - attack is not detected.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0.1, 16.1.3.1


1056933-3 : TMM may crash while processing SIP traffic

Links to More Info: K51539421, BT1056933


1056741-2 : ECDSA certificates signed by RSA CA are not selected based by SNI.

Links to More Info: BT1056741

Component: TMOS

Symptoms:
Attempts to select a client-ssl profile based on the certificate subject/SAN will not work for ECDSA certificates if ECDSA cert is signed by RSA CA. Even when the SNI in the client hello matches the certificate subject/SAN, BIG-IP selects the default client SSL profile.

Conditions:
-- ECDSA certificate signed by RSA CA.
-- Client SSL profile does not have "server name" option configured.

Impact:
The desired client-ssl profile is not selected for ECDSA hybrid certificates when the SNI matches the certificate subject/SAN.

Workaround:
Do not use hybrid certificates or configure the "server name" option in the client-ssl profile matching SNI.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1056401-4 : Valid clients connecting under active syncookie mode might experience latency.

Links to More Info: BT1056401

Component: Local Traffic Manager

Symptoms:
Valid clients that connect using active syncookie mode might experience latency.

Conditions:
- SYN Cookie (Hardware or Software) is enabled.
- SYN Cookies are activated (TCP Half Open) for the virtual server.
- FastL4 tcp-generate-isn option or SYN-ACK vector 'suspicious event count' options are enabled.
- SYN Cookie issue and validation with client is correct.
- SSL Client Hello packet sent by client reaches DHD right after TCP SYN packet is sent to backend server.

Impact:
Random connections might be disrupted.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1056365-1 : Bot Defense injection does not follow best SOP practice.

Links to More Info: BT1056365

Component: Application Security Manager

Symptoms:
In specific cases, Bot Defense challenge does not follow Same Origin Policy.

Conditions:
Bot Defense Profile is attached to VS.

Impact:
In some cases, Bot Defense Injection does not follow Same Origin Policy.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1055925-1 : TMM may crash while processing traffic on AWS

Links to More Info: K34511555, BT1055925


1055737-1 : TMM may consume excessive resources while processing HTTP/2 traffic

Links to More Info: K79933541, BT1055737


1055361-1 : Suspending iRule command in L7CHECK_CLIENT_DATA can lead to a tmm crash.

Links to More Info: BT1055361

Component: SSL Orchestrator

Symptoms:
Suspending iRule command in L7CHECK_CLIENT_DATA can lead to a TMM crash.

Conditions:
Suspending iRule command in L7CHECK_CLIENT_DATA

Example:

ltm rule /Common/rule-a {
when L7CHECK_CLIENT_DATA {
        after 10000
        }
}

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Do not use Suspending iRule command in L7CHECK_CLIENT_DATA.

Fix:
Fixed a TMM crash.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1


1055097-1 : TCP proxy with ramcache and OneConnect can result in out-of-order events, which stalls the flow.

Links to More Info: BT1055097

Component: Local Traffic Manager

Symptoms:
Because the client resends the request, the connection is not lost, but is stalled for a considerable time.

Conditions:
-- virtual server running affected version has both webacceleration and OneConnect profiles.
-- The response has 'Cache-Control: no-cache' header.

Impact:
The stalled connection causes slow response times for application users.

Workaround:
Remove the configuration for either the OneConnect or Caching profile.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2


1053309-1 : Localdbmgr leaks memory while syncing data to sessiondb and mysql.

Links to More Info: BT1053309

Component: Access Policy Manager

Symptoms:
Top output shows that localdbmgr memory increases steadily.

Conditions:
Localdb auth is enabled or localdb is used for storing APM-related information like for MDM intune.

Impact:
Localdbmgr is killed by oom killer and is restarted, thereby affecting the execution of access policies.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.5


1053149-1 : A FastL4 TCP connection which is yet to fully establish fails to update its internal SEQ space when a new SYN is received.

Links to More Info: BT1053149

Component: Local Traffic Manager

Symptoms:
Depending on the software version running on the BIG-IP system, this issue can manifest in one of two ways:

- Versions with the fix for ID1008077 will fail to forward the client's final ACK (from the TCP 3-way handshake) to the server. Eventually, once the TCP handshake timeout expires, the BIG-IP system will reset both sides of the connection.

- Versions without the fix for ID1008077 will forward the traffic correctly, but will not advance the internal FastL4 state for the connection. Given enough traffic for the same 4-tuple, the connection may never expire. Traffic for subsequent connections will appear to be forwarded correctly, but no load-balancing will occur due to the original connection not having expired yet.

Conditions:
A FastL4 TCP connection not completing the TCP handshake correctly, and the client retrying with a new (different SEQ number) SYN.

Impact:
Traffic failures (intended as either connections failing to establish, or improper load-balancing occurring).

Fix:
A FastL4 TCP connection which is yet to fully establish now correctly updates its internal SEQ space when a new SYN is received. This means the connection advances as it should through internal FastL4 states, and is removed from the connection table when the connection closes.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1052929-4 : MCPD logs "An internal login failure is being experienced on the FIPS card" when FIPS HSM is uninitialized.

Links to More Info: BT1052929

Component: Local Traffic Manager

Symptoms:
When MCPD starts, it may log an error message reporting an issue communicating with the onboard FIPS HSM. If the HSM is uninitialized, this message is erroneous, and an be ignored.

Depending on the hardware platform, the message may be one of the following:

err mcpd[12345]: 01b50049:3: FIPSUserMgr Error: An internal login failure is being experienced on the FIPS card. Please issue 'FIPSutil loginreset -r' followed by 'bigstart restart' for a password reset. You will need your FIPS Security Officer password to reset the password..
err mcpd[12345]: 01b50049:3: FIPSUserMgr Error: An internal login failure is being experienced on the FIPS card. The FIPS card must be reinitialized, which will erase its contents..

Conditions:
-- BIG-IP system with an onboard FIPS HSM, or a vCMP guest running on a BIG-IP system with an onboard FIPS HSM
-- the FIPS HSM is not initialized, i.e. "fipsutil info" reports "FIPS state: -1".

Impact:
This message can be ignored when the FIPS HSM is not in-use, and is uninitialized.

Workaround:
Initialize the FIPS HSM following the instructions in the F5 Platforms : FIPS Administration manual.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1052893-4 : Configuration option to delay reboot if dataplane becomes inoperable

Component: TMOS

Symptoms:
When certain system failures occur and the dataplane cannot continue to handle network traffic, the BIG-IP system will automatically reboot. This behavior may restore traffic management, but it may prevent diagnosis of the failure.

Conditions:
Low-level system failure, possibly in HSB SRAM or other hardware

Impact:
Diagnosis of the dataplane failure is hindered.

Workaround:
None

Fix:
A new "sys db" variable "tmm.hsb.dataplanerebootaction" is added. The default value is "enable", which retains the previous behavior of rebooting, if a failure occurs making the dataplane inoperable. The value may optionally be set to "disable", which avoids an immediate system reboot by making the HA action be "go-offline-downlinks".

Fixed Versions:
16.1.2.2


1052173-1 : For wildcard SSRF hosts "Matched Disallowed Address" field is wrong in the SSRF violation.

Links to More Info: BT1052173

Component: Application Security Manager

Symptoms:
"Matched Disallowed Address" and "Actual Disallowed Address" both are shown as same "Actual Disallowed Address" only.

Conditions:
- configure wildcard SSRF host

Impact:
Misleading SSRF violation details

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.2.2


1052169 : Traffic is blocked on detection of an SSRF violation even though the URI parameter is in staging mode

Links to More Info: BT1052169

Component: Application Security Manager

Symptoms:
Traffic is blocked on an SSRF violation even though the URI parameter is in staging mode.

Conditions:
-- URI parameter should be in staging mode
-- Traffic contains an SSRF deny-listed host as URI parameter value

Impact:
Traffic is blocked even though the URI parameter is in staging mode

Workaround:
None.

Fixed Versions:
16.1.2.2


1052153-2 : Signature downloads for traffic classification updates via proxy fail

Links to More Info: BT1052153

Component: Traffic Classification Engine

Symptoms:
Downloading IM package via proxy fails.

Conditions:
Downloading the IM file through a proxy.

Impact:
Auto-download IM package from f5.com will fail

Workaround:
Disable the proxy and trigger the IM package download from the management interface.

Fix:
Fixed an issue with downloading updates through a proxy.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1051797 : Linux kernel vulnerability: CVE-2018-18281

Links to More Info: K36462841, BT1051797


1051561-7 : BIG-IP iControl REST vulnerability CVE-2022-1388

Links to More Info: K23605346, BT1051561


1051213-1 : Increase default value for violation 'Check maximum number of headers'.

Links to More Info: BT1051213

Component: Application Security Manager

Symptoms:
Due to recent change in browsers, up to 7 headers are newly inserted in the request.

In ASM, there is default limit of 20 headers. So, when legitimate requests have more than 20 headers, they're blocked with violation "Maximum Number of Headers exceeded".

Conditions:
When the number of headers passed in request is greater than the value of maximum number of headers set, then this violation is raised.

Impact:
Legitimate requests are blocked with violation "Maximum Number of Headers exceeded" when number of header is greater than the value set for the policy (default 20).

Workaround:
Increase "Check maximum number of headers" to 30 under Learning and Blocking settings screen for a policy.

Fix:
Increased default value of maximum number of headers to 30.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1051209-1 : BD may not process certain HTTP payloads as expected

Links to More Info: K53593534, BT1051209

Component: Application Security Manager

Symptoms:
Under certain conditions BD may not process HTTP payloads as expected.

Conditions:
- HTTP request

Impact:
Payloads are not processed as expected, potentially leading to missed signature matches.

Workaround:
N/A

Fix:
BD now processes HTTP payloads as expected.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1050969-1 : After running clear-rest-storage you are logged out of the UI with a message - Your login credentials no longer valid

Links to More Info: BT1050969

Component: SSL Orchestrator

Symptoms:
Running clear-rest-storage removes all the available tokens as well as cookie files from /var/run/pamchache.

Conditions:
Run the clear-rest-storage command.

Impact:
All users are logged out of the GUI.

Workaround:
Re-login.

Fix:
Clear-rest-storage should only remove tokens not cookies.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5


1050697-4 : Traffic learning page counts Disabled signatures when they are ready to be enforced

Links to More Info: BT1050697

Component: Application Security Manager

Symptoms:
The traffic learning page counts Disabled signatures when they are ready to be enforced.

Conditions:
Policy has a disabled signature.

Impact:
Traffic learning page shows different counts of "ready to be enforced" signatures compared to Security ›› Application Security : Security Policies : Policies List ›› <policy name>

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1050537-1 : GTM pool member with none monitor will be part of load balancing decisions.

Links to More Info: BT1050537

Component: Global Traffic Manager (DNS)

Symptoms:
A GTM pool member containing no monitor (status=BLUE) is not included in load balancing decisions.

Conditions:
GTM pool member the monitor value set to none.

Impact:
GTM does not load balance to this pool member.

Workaround:
N/A

Fix:
Handled GTM pool with "none" monitor

Behavior Change:
GTM pool members with "none" monitor are now part of load balancing decisions

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1050273-1 : ERR_BOUNDS errors observed with HTTP explicit proxy service in SSL Orchestrator.

Links to More Info: BT1050273

Component: SSL Orchestrator

Symptoms:
The following similar error log messages repeated many times:

err tmm[13905]: 01c80017:3: CONNECTOR: Listener=/Common/sslo_intercept.app/sslo_intercept-in-t-4, Profile=/Common/ssloS_httpEpxy.app/ssloS_httpEpxy-t-4-connector: Error forwarding egress to return virtual server (null) - ERR_BOUNDS
err tmm8[13905]: 01c50003:3: Service : encountered error: ERR_BOUNDS File: ../modules/hudfilter/service/service_common.c Function: service_cmp_send_data, Line: 477

Conditions:
1. SSL Orchestrator with HTTP explicit proxy as a service.
2. System is under load.
3. On VELOS platform.

Impact:
SSL Orchestrator throughput is degraded.

Workaround:
N/A

Fix:
After the fix, no such errors are observed and the throughput is back to normal.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.5


1049229-1 : When you try to create a sub-rule under the Network Firewall rule list, the error: 'No Access' displays.

Links to More Info: BT1049229

Component: Advanced Firewall Manager

Symptoms:
An authenticated administrative user tries to create a sub-rule under the Network Firewall rule list from the GUI and is redirected to a 'No Access' error page.

Conditions:
This error can occur when you create a sub-rule under the Network Firewall rule list in the TMOS GUI on a version of BIG-IP (including engineering hotfixes) that include the fixes for BIG-IP bugs ID1032405 and ID941649.

Impact:
The user cannot create a sub-rule under the Network Firewall rule list in the TMOS GUI.

Workaround:
Use the TMOS Shell (tmsh) command-line interface to perform the equivalent action.

Fix:
After the fixes for ID1032405 and ID941649 are installed, the "No Access" errors no longer occur when you create a sub-rule under the Network Firewall rule list in the TMOS GUI.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1048853-1 : "IKE VBUF" memory leak debug.

Links to More Info: BT1048853

Component: TMOS

Symptoms:
The memory increase is seen through tmctl memory_usage_stat when ipsec-sa are deleted and new ipsec-sa are created.

Conditions:
A tunnel connection exists between the BIG-IP initiator and responder.

Impact:
Memory consumption increases after every ipsec-sa delete operation when the new ipsec-sa is created.

Workaround:
N/A

Fix:
Fixed a memory leak related to ipsec-sa.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


1048685-4 : Rare TMM crash when using Bot Defense Challenge

Links to More Info: BT1048685

Component: Application Security Manager

Symptoms:
When using the Bot Defense Profile on Blocking mode, TMM could crash on rare cases with a core dump.

Conditions:
Using the Bot Defense profile on blocking mode.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
TMM will no longer crash on rare conditions when using the Bot Defense Challenge

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


1048541-1 : Certificate Order Manager: renew requests to the Comodo (now Sectigo) CA are unsuccessful.

Links to More Info: BT1048541

Component: TMOS

Symptoms:
A BIG-IP Administrator utilizing the 'Certificate Order Manager' feature is unable to renew SSL certificates issued by the Comodo (now Sectigo) certification authority.

Conditions:
Using the 'Certificate Order Manager' feature on BIG-IP to renew SSL certificates issued by the Comodo (now Sectigo) certification authority.

Impact:
The renew requests fail.

Fix:
The renew requests now succeed.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1048445-1 : Accept Request button is clickable for unlearnable violation illegal host name

Links to More Info: BT1048445

Component: Application Security Manager

Symptoms:
For the following violations:
- VIOL_HOSTNAME (Hostname violation)
- VIOL_HOSTNAME_MISMATCH (Hostname mismatch violation)

The accept button is clickable when it should not. Accept Request button should be disabled for this violations.

Conditions:
Generate an illegal host name or hostname mismatch violation.

Impact:
Request will not be accepted even though you have elected to accept the illegal request.

Workaround:
Do not accept the request to hostname and hostname mismatch violation, no ASM config changes will be triggered.

Fixed Versions:
16.1.2.2, 15.1.6.1


1048433-1 : Improve Extract logic of thales-sync.sh to support VIPRION cluster to support 12.6.10 client installation.

Links to More Info: BT1048433

Component: Local Traffic Manager

Symptoms:
The thales-sync.sh script tries to install on the second blade eventually The packages provided by formerly Thales now nShield/Entrust are increasing version to version, The extract logic is not compatible with to latest versions.

Conditions:
While upgrading lower versions to 12.60.

Impact:
The installation script will fail to find to extract packages.

Workaround:
N/A

Fix:
Extract all the tarballs in the target directory to resolve the issue.

Fixed Versions:
16.1.2.1, 15.1.5.1


1048141-3 : Sorting pool members by 'Member' causes 'General database error'

Links to More Info: BT1048141

Component: TMOS

Symptoms:
The configuration utility (web UI) returns 'General database error' when sorting pool members. The pool member display does not work for the duration of the login.

Conditions:
Sorting the pool member list by member.

Impact:
A pool's pool member page cannot be displayed.

Workaround:
Clear site and cached data on browser and do not sort by pool member.

Fix:
Pool members can be sorted by member.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1048137-2 : IPsec IKEv1 intermittent but consistent tunnel setup failures

Links to More Info: BT1048137

Component: TMOS

Symptoms:
IKEv1 tunnels fail to start or re-key after an upgrade.

In the racoon.log file a clear sign of this issue is the combination of an IPsec SA being established and a buffer space error immediately after:

INFO: IPsec-SA established: ESP/Tunnel 172.16.1.6[0]->172.16.12.6[0] spi=2956426629(0xb0377d85)
ERROR: pfkey UPDATE failed: No buffer space available

Conditions:
-- IPsec IKEv1 tunnels

Impact:
IPsec tunnels will stop working after being up for an initial period of time.

Workaround:
The only workaround is to switch to IKEv2.

Fix:
Internal message handling related to IKEv2 high availability (HA) has changed, unintentionally breaking IKEv1's ability to keep tunnel states up-to-date. IKEv1 can now track tunnel state correctly.

Note: IKEv1 high availability (HA) / mirroring is still not supported and there is no plan to support it.

Fixed Versions:
17.0.0, 16.1.3.1


1048033-1 : Server-speaks-first traffic might not work with SSL Orchestrator

Links to More Info: BT1048033

Component: SSL Orchestrator

Symptoms:
Server-speaks-first traffic does not pass through BIG-IP SSL Orchestrator. BIG-IP does not do service chaining to the service that has port-remap enabled.

Conditions:
- Interception Rule has verified accept enabled.
- Security policy is service chaining and port-remap is enabled on one of the security services

Impact:
Connection does not succeed, client sees a reset after timeout.

Workaround:
Disable port-remap on service and redeploy.

Fix:
Fix SSL Orchestrator connector to handle server-speaks-first traffic. After fix, server speaks first traffic will work even with port-remap enabled on the service.

Fixed Versions:
17.0.0, 16.1.2.2


1047581-3 : Ramcache can crash when serving files from the hot cache

Links to More Info: BT1047581

Component: Local Traffic Manager

Symptoms:
Under certain circumstances, TMM may crash when processing traffic for a virtual server that uses RAM Cache.

Conditions:
- RAM Cache configured
- Document served not out of the hotcache
- The server served with must-revalidate.
- The server 304 contains a 0 byte gzip payload

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1047389-4 : Bot Defense challenge hardening

Links to More Info: BT1047389

Component: Application Security Manager

Symptoms:
Under certain conditions, the Bot Defense profile does not follow current best practices.

Conditions:
Bot Defense profile used

Impact:
The Bot Defense profile does not follow current best practices.

Workaround:
None

Fix:
The Bot Defense profile now follows current best practices.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1047377-1 : "Server-speak-first" traffic might not work with SSL Orchestrator

Links to More Info: BT1047377

Component: SSL Orchestrator

Symptoms:
Server-speaks-first traffic does not pass through BIG-IP SSL Orchestrator. BIG-IP does not perform a TCP three-way handshake to the server.

Conditions:
SSL Orchestrator interception rule has an attached security policy that is service chaining and at-least one service has port-remap enabled.

Impact:
Connection does not succeed, client sees a reset after timeout.

Workaround:
Disable port-remap on service and redeploy.

Fix:
Fix SSL Orchestrator connector to handle server speaks first traffic. After fix, server-speaks-first traffic will work even with port-remap enabled on the service.

Fixed Versions:
17.0.0, 16.1.2.2


1047213-1 : VPN Client to Client communication fails when clients are connected to different TMMs.

Links to More Info: BT1047213

Component: TMOS

Symptoms:
Client-to-client communication between APM VPN clients connected to different TMMs does not work.

Conditions:
-- Clustered multiprocessing (CMP) is enabled.

Impact:
Client to client communication over the network access connection fails.

Workaround:
Demote the virtual server from CMP processing.

# tmsh modify ltm virtual <virtual> cmp-enabled no

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2


1047169-1 : GTM AAAA pool can be deleted from the configuration despite being in use by an iRule.

Links to More Info: BT1047169

Component: TMOS

Symptoms:
A BIG-IP Administrator is incorrectly able to delete a GTM AAAA pool from the configuration, despite this object being referenced in an iRule in use by an AAAA wideip.

An error similar to the following example will be visible in the /var/log/gtm file should the iRule referencing the pool run after the pool has been deleted:

err tmm[11410]: 011a7001:3: TCL error: Rule /Common/my_rule <DNS_REQUEST> - GTM Pool 'my_pool' of type 'A' not found (line 1)GTM Pool 'my_pool' of type 'A' not found (line 1) invoked from within "pool my_pool"

Note the error message incorrectly reports the pool as type A (it should report type AAAA).

Conditions:
-- Two GTM pools of type A and AAAA share the same exact name (which is legal).

-- The pool name is referenced in an iRule by the 'pool' command.

-- The iRule is in use by an AAAA wideip.

-- A BIG-IP Administrator attempts to delete the AAAA pool.

Impact:
The system incorrectly allows the deletion of the AAAA pool from the configuration.

Consequently, the next time the GTM configuration is reloaded from file, the operation will fail.

Additionally, traffic which relied on the pool being present in the configuration will fail.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1047089-2 : TMM may terminate while processing TLS/DTLS traffic

Links to More Info: K14229426, BT1047089


1047053-3 : TMM may consume excessive resources while processing RTSP traffic

Links to More Info: K37155600, BT1047053


1046785-1 : Missing GTM probes when max synchronous probes are exceeded.

Links to More Info: BT1046785

Component: Global Traffic Manager (DNS)

Symptoms:
GTM probes are missing, resources are marked down.
When instances fail and BIG-IP is not aware of the failure, some virtual servers/pool members are marked as available and some objects are marked down on part of the sync group members.

In the /var/log/gtm file, the following message may be seen:

011ae116:4: The list processing time (x seconds) exceeded the interval value. There may be too many monitor instances configured with a y second interval

Note that this message is only logged once when gtmd is restarted, or when monitors are added or removed in the gtm configuration.

Conditions:
Max synchronous probes are exceeded. This value is controlled by the GTM global variable max-synchronous-monitor-requests.

Impact:
-- Resources are marked down.
-- Inconsistent monitor statuses across BIG-IP DNS systems in a single sync group, with some showing 'big3d: timed out' and others potentially showing a stale up or down status for the same targets.
-- Because some monitor instances don't have monitor traffic, if an instance fails, the BIG-IP DNS systems may not be aware of the failure.

Workaround:
Increase the value of Max Synchronous Monitor Requests:

tmsh modify gtm global-settings metrics max-synchronous-monitor-requests value <value - default is 20>

Fix:
All monitors are now allowed to probe without triggering a failure.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5, 13.1.5


1046693-4 : TMM with BFD confgured might crash under significant memory pressure

Links to More Info: BT1046693

Component: TMOS

Symptoms:
TMM might crash when processing BFD traffic under high memory pressure.

Conditions:
- BFD in use.
- TMM under high memory pressure.

Impact:
Traffic disrupted while tmm restarts.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1046669-1 : The audit forwarders may prematurely time out waiting for TACACS responses

Links to More Info: BT1046669

Component: TMOS

Symptoms:
If a TACACS server takes longer than five seconds to respond, the audit forwarder will reset the connection.

Conditions:
-- Using remote TACACS logging.
-- TACACS server takes longer than 5 seconds to respond to logging requests.

Impact:
Misleading log messages.

Fix:
The time that a BIG-IP system will wait for a response from a TACACS server is now configurable using the DB variable config.auditing.forward.tacacs.timeout.response.

Behavior Change:
The time that a BIG-IP system will wait for a response from a TACACS server is now configurable using the DB variable config.auditing.forward.tacacs.timeout.response.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1046317-2 : Violation details are not populated with staged URLs for some violation types

Links to More Info: BT1046317

Component: Application Security Manager

Symptoms:
The "Triggered Violations" field in the event log screen and corresponding data in remote logging is not populated.

Conditions:
- The URL is in staging
- The triggered violation is one of the following violations
VIOL_MANDATORY_REQUEST_BODY
VIOL_URL_CONTENT_TYPE
VIOL_METHOD

Impact:
Lack of details in the request log event.

Workaround:
None

Fix:
This defect is closely related to ID1036305 and both defects are fixed together

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1


1045549-4 : BFD sessions remain DOWN after graceful TMM restart

Links to More Info: BT1045549

Component: TMOS

Symptoms:
BFD sessions remain DOWN after graceful TMM restart

Conditions:
TMM is gracefully restarted, for example with 'bigstart restart tmm' command.

Impact:
BFD sessions remain DOWN after graceful TMM restart

Workaround:
After restarting TMM, restart tmrouted.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1045421-1 : No Access error when performing various actions in the TMOS GUI

Links to More Info: K16107301, BT1045421

Component: TMOS

Symptoms:
An authenticated administrative user is redirected to a 'No Access' error page while performing various actions in the TMOS GUI, including when trying to:
-- Apply a policy to a virtual server
-- Import images (TMOS images / hotfixes / apmclients)
-- Export/apply an APM policy
-- Run the high availability (HA) setup wizard
-- Export a certificate/key through one of the following paths:
    ---- System / Certificate Management : Traffic Certificate Management : SSL Certificate List / test-renew-self-sign / Renew
    ---- DNS / GSLB : Pools : Pool List / Click Testpool / Click Members / Click Manage
    ---- System / Software Management : APM Clients / Import
    ---- System / Certificate Management : Traffic Certificate Management : SSL Certificate List / NewSSLCert / Certificate / Export / Click Download

Conditions:
This may occur when performing various actions in the TMOS GUI on a version of BIG-IP software (including Engineering Hotfixes) that includes fixes for ID1032405 :: https://cdn.f5.com/product/bugtracker/ID1032405.html and ID941649 :: https://cdn.f5.com/product/bugtracker/ID941649.html .

Impact:
Cannot perform various actions in the TMOS GUI.

Workaround:
Use the TMOS Shell (tmsh) command-line interface to perform the equivalent action.

Fix:
'No Access' errors no longer occur when performing various actions in the TMOS GUI under these conditions.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1045229-1 : APMD leaks Tcl_Objs as part of the fix made for ID 1002557

Links to More Info: BT1045229

Component: Access Policy Manager

Symptoms:
APMD memory grows over time causing OOM killer to kill apmd

Conditions:
Access policy has resource assignment agents/variable assignments

Impact:
APMD memory grows over time and OOM killer may terminate apmd thereby affecting traffic. Access traffic disrupted while apmd restarts.

If APMD is not killed by OOM killer the system may start thrashing and become unstable, generally resulting in cores from innocent processes that are no longer scheduled correctly - keymgmtd, bigd, mcpd are typical victims.
Ultimately system may restart automatically as watchdogs fail.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5


1045101-4 : Bd may crash while processing ASM traffic

Links to More Info: K03442392, BT1045101


1044425-1 : NSEC3 record improvements for NXDOMAIN

Links to More Info: K85021277, BT1044425

Component: Global Traffic Manager (DNS)

Symptoms:
BIG-IP DNSSEC NSEC3 records for NXDOMAIN responses can be improved to support current best practices.

Conditions:
- DNSSEC zone configured

Impact:
BIG-IP DNSSEC NSEC3 records for NXDOMAIN responses do not follow current best practices.

Workaround:
N/A

Fix:
BIG-IP DNSSEC NSEC3 records for NXDOMAIN responses now follow current best practices.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1044121-3 : APM logon page is not rendered if db variable "ipv6.enabled" is set to false

Links to More Info: BT1044121

Component: Access Policy Manager

Symptoms:
When accessing a Virtual Server with an access policy, users are redirected to the hangup page.

Conditions:
Db variable "ipv6.enabled" is set to false

Impact:
Users will not be able to access the virtual server and associated resources behind it.

Workaround:
Keep the value of db variable "ipv6.enabled" set to true.

# setdb "ipv6.enabled" true

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5


1043805-3 : ICMP traffic over NAT does not work properly.

Links to More Info: BT1043805

Component: Local Traffic Manager

Symptoms:
ICMP traffic hitting a NAT translation address is dropped and not sent further to the originating address.

Conditions:
-- An LTM NAT is configured.
-- ICMP traffic arrives.

Impact:
ICMP traffic fails to be forwarded over the NAT.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7, 14.1.5.1


1043533-3 : Unable to pick up the properties of the parameters from audit reports.

Links to More Info: BT1043533

Component: Application Security Manager

Symptoms:
In the GUI under Security ›› Application Security : Audit : Reports, if you select "User-input parameters..." in the menu "Security Policy Audit Reports", then click on the parameter to retrieve the properties, you will see this error:
   " Could not retrieve parameter; Could not get the Parameter, No matching record was found."

Conditions:
1) Create a new parameter.
2) Customize or overwrite an existing ASM signature for the parameter in question.
3) Save and apply to the policy the new changes
4) Go to:
    Security ›› Application Security : Audit : Reports
    Report Type : User-input parameters with overridden attacks signatures (this also happens for other "User-input parameters...")
    Select the parameter to audit
    Error: "Could not retrieve parameter; Could not get the Parameter, No matching record was found."

Impact:
A page error occurs.

Workaround:
1. Open in a separate tab the following screen: Security ›› Application Security : Parameters : Parameters List
2. Under "Parameter List" title, there is a filter dropdown with the "Parameter Contains" texting.
3. On the blank part (before "Go" button) type the name of the required parameter.
4. You will get the desired page with the desired parameter properties.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1043385-4 : No Signature detected If Authorization header is missing padding.

Links to More Info: BT1043385

Component: Application Security Manager

Symptoms:
If the Authentication scheme value in the Authorization header contains extra/missing padding in base64, then ASM does not detect any attack signatures.

Conditions:
HTTP request with Authorization header contains base64 value with extra/missing padding.

Impact:
Attack signature not detected.

Workaround:
N/A

Fix:
Base64 values with extra/missing padding has been handled to detect attack signature

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1043357-4 : SSL handshake may fail when using remote crypto client

Links to More Info: BT1043357

Component: Local Traffic Manager

Symptoms:
ServerSSL handshake fails when verifying ServerKeyExchange message.

Conditions:
Remote crypto client is configured and the ServerSSL profile connects using an ephemeral RSA cipher suite.

Impact:
The virtual server is unable to connect to the backend server.

Workaround:
Use non-ephemeral RSA or ECDSA cipher suite on ServerSSL.

Fix:
Fix remote crypto client.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1043281-6 : OpenSSL vulnerability CVE-2021-3712

Links to More Info: K19559038, BT1043281


1043217-1 : NTLM frontend auth fails with the latest Microsoft RDP client on MacOS 14.0.1 platform

Links to More Info: BT1043217

Component: Access Policy Manager

Symptoms:
NTLM frontend auth fails with the latest Microsoft RDP client on MacOS 14.0.1 platform

Conditions:
Windows Server configured as a back-end and BIG-IP is acting as an RDP gateway. After recent upgrade of MacOS Client (iOS 14.0.1), the Remote desktop starts failing.

Latest Microsoft RDP clients mandate below three flags as part of NTLM CHALLENGE message which will sent from NTLM Auth Server/Proxy

1.NTLMSSP_NEGOTIATE_KEY_EXCH
2.NTLMSSP_NEGOTIATE_VERSION
3.NTLMSSP_REQUEST_TARGET

Due to this, RDP client rejecting the NTLM challenge, and authentication is failing.

Impact:
Users won't be able to establish RDP sessions to the backend Windows Server

Fix:
Updated the ECA (NTLM frontend auth service) to include these flags as part of NTLM Challenge.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1043205-1 : SSRF Violation should be shown as a Parameter Entity Reference.

Links to More Info: BT1043205

Component: Application Security Manager

Symptoms:
SSRF Violation is shown as a URL Entity Reference instead of a Parameter Entity Reference.

Conditions:
- Create a URI data type parameter
- Add a host to the SSRF Host List
- Send traffic which contains the URI parameter with the value configured in the SSRF Host List

Impact:
Wrong Entity Reference in the SSRF violation is misleading.

Workaround:
N/A

Fix:
Corrected the Entity reference as a parameter instead of a URL in the SSRF violation.

Fixed Versions:
16.1.2.1


1043017-4 : Virtual-wire with standard-virtual fragmentation

Links to More Info: BT1043017

Component: Local Traffic Manager

Symptoms:
A standard virtual-server configured on top of a virtual-wire has unexpected handling of fragmented IP traffic.

Conditions:
Standard virtual-server configured on top of a virtual-wire handling fragmented IP traffic.

Impact:
- Fragments missing on egress.
- Packet duplication on egress.

Workaround:
Use fastl4 virtual-server instead.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.6


1042917-1 : Using 'Full Export' of security policy should result with no diffs after importing it back to device.

Links to More Info: BT1042917

Component: Application Security Manager

Symptoms:
'Declarative policy import' is adding entities into the policy according what it has in the JSON file.

When it imports the policy builder settings, some automatic changes are created in the policy, and it may override other entities which were added before.

Conditions:
Policy builder settings are added in import after other affected entities were added before.

Impact:
The resulted policy will be different from the exported policy.

Workaround:
N/A

Fix:
'Declarative Policy import' first adds the policy builder settings, and all other affected entities are imported only after it, and in this way the resulted policy is the same as the exported one.

Fixed Versions:
17.0.0, 16.1.2


1042913-2 : Pkcs11d CPU utilization jumps to 100%

Links to More Info: BT1042913

Component: Local Traffic Manager

Symptoms:
CPU utilization of pkcs11d increases to 100%.

Conditions:
This occurs when pkcs11d is disconnected from the external HSM.

Impact:
As the pkcs11d consumes most of the CPU, other processes are starved for CPU.

Workaround:
None.

Fix:
Pkcs11d no longer consumes 100% CPU when it is disconnected from the external HSM.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1042737-4 : BGP sending malformed update missing Tot-attr-len of '0.

Links to More Info: BT1042737

Component: TMOS

Symptoms:
BIG-IP might send a malformed BGP update missing Tot-attr-len of '0 when performing a soft reset out.

Conditions:
-- Multiple traffic groups configured.
-- A BGP soft reset occurs.

Impact:
BGP peering resets.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1042605-1 : ASM Critical Warnings during UCS load after upgrade to v15.1.0 or above

Links to More Info: BT1042605

Component: Application Security Manager

Symptoms:
Following an upgrade, an error occurs:
ERROR: Failed during loading ASM configuration.

An "ASM critical warning" banner is displayed in the ASM GUI.

Conditions:
-- ASM is upgraded to v15.1.0 or above
-- The following query returns results prior to upgrading:

SELECT policy_name_crc FROM DCC.ACCOUNTS accounts WHERE policy_name NOT IN (SELECT name FROM PLC.PL_POLICIES)

Impact:
ASM upgrade is aborted due to an exception:
Can't call method "clear_traffic_data" on unblessed reference

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1042509-1 : On an HTTP2 gateway virtual server, TMM does not ever update the stream's window for a large POST request

Links to More Info: BT1042509

Component: Local Traffic Manager

Symptoms:
On an HTTP2 gateway virtual server (HTTP/2 on clientside, no httprouter profile), TMM does not update the stream's window (i.e. acking data at the HTTP/2 stream layer). This causes large HTTP requests with payloads (i.e. POSTs) to stall and eventually time out.

TMM does sometimes send WINDOW_UPDATE messages for the entire connection, but not for the stream. Since flow control is required at both the connection and stream levels, the client stalls out.

Conditions:
-- Virtual server with HTTP2 profile
-- Configured as HTTP2 Gateway (HTTP2 profile on clientside and no 'httprouter' profile)
-- Client sends large data transfer to the virtual server

Impact:
Client data transfer through HTTP/2 virtual server (POST / PUT / etc) fails.

Workaround:
Use an HTTP router profile (assign the 'httprouter' profile to the virtual server, or select the 'HTTP MRF Router' option in TMUI)

Fixed Versions:
17.0.0, 16.1.2.2


1042069-1 : Some signatures are not matched under specific conditions.

Component: Application Security Manager

Symptoms:
Some signatures are not matched and attack traffic can pass through.

Conditions:
There are more than 20 signatures that have a common keyword with a signature that does not match (and has a common keyword and a new keyword).

Impact:
Attacking traffic can bypass the WAF.

Workaround:
N/A

Fix:
Attack signatures that share words with other attack signatures will be matched correctly now.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.4.1, 14.1.4.5, 13.1.5


1042009-1 : Mcpd fails to reply if a request is proxied to another daemon and the connection to that daemon closes

Links to More Info: BT1042009

Component: TMOS

Symptoms:
Mcpd does not reply to the request if the publisher's connection closes/fails, in this case when bcm56xxd
is restarted. The perceivable signs of the failure are the snmpwalk failing with a timeout and the
"MCPD query response exceeding" log messages

Conditions:
1) Configure snmp on the BIG-IP so you can run snmpwalk locally on the BIG-IP.

2) From one session on the BIG-IP, run a snmpwalk in the while loop.
    
while true;do date; snmpwalk -v2c -c public 127.0.0.1 sysDot1dbaseStat;sleep 2;done

Sample output:

Sat Aug 21 00:57:23 PDT 2021
F5-BIGIP-SYSTEM-MIB::sysDot1dbaseStatResetStats.0 = INTEGER: 0
F5-BIGIP-SYSTEM-MIB::sysDot1dbaseStatMacAddr.0 = STRING: 0:23:e9:e3:8b:41
F5-BIGIP-SYSTEM-MIB::sysDot1dbaseStatNumPorts.0 = INTEGER: 12
F5-BIGIP-SYSTEM-MIB::sysDot1dbaseStatType.0 = INTEGER: transparentonly(2)

3) From a second session on the BIG-IP restart bcm56xxd

bigstart restart bcm56xxd

4a) the snmpwalk will continually report the following:

Timeout: No Response from 127.0.0.1

And snmpd will continually log "MCPD query response exceeding" every 30 seconds in /var/log/ltm

Impact:
SNMP stopped responding to queries after upgrade

Workaround:
Snmpd restart

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1041865-4 : Correctable machine check errors [mce] should be suppressed

Links to More Info: K16392416, BT1041865

Component: TMOS

Symptoms:
Log emerg in kern.log similar to:
  emerg kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 10: cc003009000800c1

Conditions:
Correctable errors can be identified by analyzing the 16‐bit value shown in bits [31:16] of the 64‐bit error from the /var/log/kern.log message. There are many types of correctable errors that are not service impacting. Correctable errors are part of the ECC DIMM technology. The following is an example of a correctable error.

An example is shown below.

Log error matches this pattern:
  Machine Check: 0 [bank number]: [cc003009][0008][00c1]
  bits [31:16] = 0008

Impact:
Correctable errors are logged in kern.log and to the console. There is no functional impact.

Workaround:
If the error message matches the signature in the example above, an RMA is not needed.

If the error message does not match that signature, check the system's traffic condition and confirm there is no negative performance impact. If no performance impact is observed then it means the error is a correctable error and an RMA is not required.

F5 recommends that you upgrade to a fixed TMOS version, then check that the error message is eliminated. For more information, see K16392416: Memory errors and MCE errors

Fix:
Fixed “correctable MCE error suppressed” errors.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.7


1041765-2 : Racoon may crash in rare cases

Links to More Info: BT1041765

Component: TMOS

Symptoms:
Racoon may crash when NAT Traversal is on and passing IPsec traffic in IKEv1.

Conditions:
-- IKEv1 IPsec tunnel configured
-- NAT Traversal is on in ike-peer configuration.

Impact:
Racoon will crash and any IKEv1 tunnels will restart

Workaround:
Use IKEv2 only.

Fix:
This racoon crash has been stopped.

Fixed Versions:
17.0.0, 16.1.2.1


1041149-1 : Staging of URL does not affect apply value signatures

Links to More Info: BT1041149

Component: Application Security Manager

Symptoms:
When a URL is staged and a value content signature is detected, the matched request is blocked.

Conditions:
-- URL is set to staging;
-- Only default ("Any") content profile is present, set to apply value signatures (all other content profiles deleted);
-- Request matches attack signature

Impact:
The request for staged URL is blocked

Workaround:
Configure relevant content profiles or leave the default content profiles configuration.

Fix:
Fixed to correctly handle URL staging in case of only "Any" content profile.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1040821-4 : Enabling an iRule or selecting a pool re-checks the "Address Translation" and "Port Translation" checkboxes

Links to More Info: BT1040821

Component: TMOS

Symptoms:
Address Translation and Port Translation checkboxes are automatically checked under the virtual server's advanced configuration.

Conditions:
Virtual Server's Advanced configuration option is selected followed by adding an iRule or a pool.

Impact:
The Address and Port translation options are automatically checked when the default is to have them unchecked.

Workaround:
Manually un-check Address Translation and Port Translation checkboxes under virtual server's advanced configuration

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1040677 : BIG-IP D120 platform reports page allocation failures in N3FIPS driver

Links to More Info: BT1040677

Component: Local Traffic Manager

Symptoms:
Despite having free memory, the BIG-IP system logs kernel page allocation failures to the /var/log/kern.log file. The first line of the output appears similar to the following example:

swapper/6: page allocation failure: order:2, mode:0x204020

After that, a stack trace follows. The process name in the line ('swapper/16', in this example). You may see generic Linux processes or processes specific to F5 in that line.

Conditions:
This issue is known to occur on the appliance D120 (iSeries i15820-DF).

Impact:
As different processes can experience this issue, and the system may behave unpredictably. Software installation may fail.

Workaround:
You can work around this issue by increasing the value of the min_free_kbytes kernel parameter. This controls the amount of memory that is kept free for use by special reserves.

It is recommend to increase this to 128 MB (131072 KB).

When instantiating this workaround, consider whether you want the workaround to survive only reboots, or to survive reboots, upgrades, RMAs, etc. This is an important consideration to make, as you should stop using this workaround when this issue is fixed in a future version of BIG-IP software. So consider the pros and cons of each approach before choosing one.

-- If you want the workaround to survive reboots only, perform the following procedure:

1) Log on to the advanced shell (BASH) of the primary blade of the affected system.

2) Run the following commands (with the desired amount in KB):

# clsh "sysctl -w vm.min_free_kbytes=131072"
# clsh "echo -e '\n# Workaround for ID 851785' >> /etc/sysctl.conf"
# clsh "echo 'vm.min_free_kbytes = 131072' >> /etc/sysctl.conf"

-- If you want the workaround to survive reboots, upgrades, RMAs, etc., perform the following procedure:

1) Log on to the advanced shell (BASH) of the primary blade of the affected system.

2) Run the following commands (with the desired amount in KB):

# clsh "sysctl -w vm.min_free_kbytes=131072"
# echo -e '\n# Workaround for ID851785' >> /config/startup
# echo 'sysctl -w vm.min_free_kbytes=131072' >> /config/startup

Note that the last two commands are not wrapped inside 'clsh' because the /config/startup file is already automatically synchronized across all blades.

Once the issue is fixed in a future BIG-IP version, remove the workarounds:

-- To remove the first workaround:

1) Edit the /etc/sysctl.conf file on the BIG-IP appliance and remove the added lines at the bottom.

2) Reboot the system by running 'clsh reboot'. This will restore the min_free_kbytes kernel parameter to its default value for the BIG-IP version you are running.

-- To remove the second workaround:

1) Edit the /config/startup file on the BIG-IP appliance and remove the extra lines at the bottom.

2) Reboot the system by running 'clsh reboot'. This restores the min_free_kbytes kernel parameter to its default value for the BIG-IP version you are running.

To verify the workaround is in place, run the following command (this should return the desired amount in KB):

# clsh "cat /proc/sys/vm/min_free_kbytes"

Fix:
The BIG-IP system no longer experiences excessive kernel page allocation failures.

Fixed Versions:
17.0.0, 16.1.1


1040513-5 : The counter for "FTP commands" is always 0.

Links to More Info: BT1040513

Component: Application Security Manager

Symptoms:
On the FTP Statistics page, the "FTP Commands" value is always zero.

Conditions:
FTP security is applied and "FTP commands violations" is enforced.

Impact:
The FTP security does not show violations statistics regarding the FTP commands.

Workaround:
None

Fix:
"FTP commands statistics" now shows an accurate value in the UI.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


1040361-1 : TMM crashes during its startup when TMC destination port list attached/deleted to virtual server.

Links to More Info: BT1040361

Component: Local Traffic Manager

Symptoms:
-- Log message written to TMM log file:
   panic: ../kern/page_alloc.c:736: Assertion "vmem_hashlist_remove not found" failed.

Conditions:
-- Virtual Server using a traffic-matching-criteria (TMC) with a destination-port-list, with multiple distinct ranges of ports.

-- Config changes to virtual server with traffic-matching criteria can cause memory corruption which can lead to delayed TMM crashes.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Do not use Traffic Matching Criteria with destination port lists.
TMM restart is required in case the virtual server is modified with traffic-matching-criteria related config.

Fix:
TMM no longer crashes under these conditions.

Fixed Versions:
17.0.0, 16.1.2, 15.1.5, 14.1.4.5


1039725-1 : Reverse proxy traffic fails when a per-request policy is attached to a virtual server.

Links to More Info: BT1039725

Component: Access Policy Manager

Symptoms:
Reverse proxy or inbound traffic fails during SSL renegotiation when a per-request policy is attached to the virtual server.

Conditions:
-- SSL Orchestrator is licensed and provisioned.
-- Per-request policy is attached to virtual server.
-- Client or backend server initiates SSL renegotiation.

Impact:
Reverse proxy traffic fails during SSL renegotiation.

Workaround:
If renegotiation is not required then it can be disabled on BIG-IP. The client SSL and server SSL profiles have 'Renegotiation' settings. If it is set to disabled, BIG-IP or SSL Orchestrator does not do SSL renegotiation.

Fix:
Reverse proxy or inbound traffic no longer fails during SSL renegotiation when per-req policy is attached to the virtual server.

Fixed Versions:
17.0.0, 16.1.3.1


1039553-1 : Non-200 HTTP status codes fail to be matched by GTM HTTP(S) monitors

Links to More Info: BT1039553

Component: Global Traffic Manager (DNS)

Symptoms:
GTM virtual servers have the wrong status (up when they should be down, or down when they should be up, depending on the monitor's configuration).

Conditions:
-- The GTM virtual servers are monitored with an HTTP or HTTPS monitor that performs HTTP status matching.

-- The monitor tries to match an HTTP status code other than 200 (for example, 301).

-- The monitor uses HTTP version 1.0 or 1.1 for the request (the default is 0.9).

Impact:
The system incorrectly considers all non-200 responses a failed monitor attempt, despite what the user specified as acceptable status codes in the monitor's configuration. As a result, the availability status reported for a virtual server may be incorrect. This may cause the GTM system to send traffic to unsuitable resources causing application disruptions.

Workaround:
You can work around this issue in any of the following ways:

-- Use HTTP version 0.9 for the monitor requests.

-- Match on the 200 HTTP status code.

-- Do not use HTTP status matching altogether.

Fix:
GTM HTTP(S) monitors using HTTP version 1.0 or 1.1 can now successfully match status codes other than 200 in the response.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5


1039329-2 : MRF per peer mode is not working in vCMP guest.

Links to More Info: BT1039329

Component: Service Provider

Symptoms:
MRF diameter setup, in peer profile "auto-initialization" and "per peer" mode are enabled, but no connection attempts towards the pool member occur.

When the mode is switched to "per tmm" or "per blade", connections are established.

Conditions:
The peer connection mode in the peer profile is set to "per peer".

Impact:
The "per peer" setting does not work.

Workaround:
Switch the connection mode to "per tmm" or "per blade"

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


1039245-2 : Policy Properties screen does not load and display

Links to More Info: BT1039245

Component: Application Security Manager

Symptoms:
On the Security ›› Application Security : Security Policies : Policies List page, if you click one of the policies, the page gets stuck in " Loading policy general settings... "

Conditions:
This occurs if you try to view a policy that has no template associated

Impact:
Unable to use the GUI for the affected ASM policies.

Workaround:
# cp /var/ts/dms/script/dist/angular/TsuiAngularPoliciesScripts.min.js /shared/TsuiAngularPoliciesScripts.min.js.bk
# chmod 644 /var/ts/dms/script/dist/angular/TsuiAngularPoliciesScripts.min.js
# sed -i -e 's/"POLICY_TEMPLATE_GRAPHQL/p.policy.template\&\&"POLICY_TEMPLATE_GRAPHQL/' /var/ts/dms/script/dist/angular/TsuiAngularPoliciesScripts.min.js
# chmod 444 /var/ts/dms/script/dist/angular/TsuiAngularPoliciesScripts.min.js
# bigstart restart httpd

Fixed Versions:
17.0.0, 16.1.2.2


1039069-1 : Multiple issues affecting the RESOLV::lookup iRule command following the fix to ID1007049.

Links to More Info: BT1039069

Component: Global Traffic Manager (DNS)

Symptoms:
For more information on the specific issues fixed, please refer to:

https://cdn.f5.com/product/bugtracker/ID1010697.html
https://cdn.f5.com/product/bugtracker/ID1037005.html
https://cdn.f5.com/product/bugtracker/ID1038921.html

Please note the only versions 15.1.3.1 and 16.1.0 are affected.

Conditions:
-- Running BIG-IP version 15.1.3.1 or 16.1.0
-- RESOLV::lookup iRule is used

Impact:
Multiple issues can occur with the RESOLV::lookup command, such as DNS resolutions failing or incorrect DNS responses being received.

Workaround:
None

Fix:
-

Fixed Versions:
17.0.0, 16.1.1, 15.1.4


1039049-2 : Installing EHF on particular platforms fails with error "RPM transaction failure"

Links to More Info: BT1039049

Component: TMOS

Symptoms:
-- Installing an EHF fails with the error "RPM transaction failure"

-- Errors similar to the following are seen in the liveinstall.log file:

info: RPM: /var/tmp/rpm-tmp.LooFVF: line 11: syntax error: unexpected end of file
info: RPM: error: %preun(fpga-tools-atlantis-15.1.3-0.0.11.i686) scriptlet failed, exit status 2

Conditions:
-- Installing an EHF that contains an updated version of the 'fpga-tools-atlantis' package
-- Using the following platforms:
  + BIG-IP i4600 / i4800
  + BIG-IP i2600 / i2800
  + BIG-IP i850

Impact:
EHF installation fails.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1039041 : Log Message: Clock advanced by <number> ticks

Links to More Info: BT1039041

Component: Local Traffic Manager

Symptoms:
<ticks> is the number of milliseconds the Traffic Management Microkernel (TMM) clock is out of sync (behind) the system clock because the TMM thread is waiting for a response.

Logs are similar to below.

bigip1 notice tmm15[46856]: 01010029:5: Clock advanced by 103 ticks
bigip1 notice tmm7[46855]: 01010029:5: Clock advanced by 106 ticks
bigip1 notice tmm10[46855]: 01010029:5: Clock advanced by 107 ticks
bigip1 notice tmm25[46856]: 01010029:5: Clock advanced by 113 ticks
bigip1 notice tmm15[46856]: 01010029:5: Clock advanced by 121 ticks
bigip1 notice tmm5[46855]: 01010029:5: Clock advanced by 106 ticks

Conditions:
These logs are seen more frequently in i15820-DF platforms with FIPS enabled, in comparison to other FIPS platforms. The messages are observed during FIPS key lookup in the HSM. These lookups occur either during TMM start/restart or during SSL profile configuration modification.

Impact:
This message may appear intermittently depending on system load and conditions mentioned above, and it does not necessarily indicate system instability or a cause for concern unless accompanied by another error message or at the time of a serious event.

In all the above conditions, clock advance ticks are in the range of 100 - 170.

Fixed Versions:
17.0.0, 16.1.2


1038913-4 : The weekly ASM reporting "Security ›› Reporting : Application : Charts" filter "View By" as IP Intelligence shows only the "Safe" category

Links to More Info: BT1038913

Component: Application Visibility and Reporting

Symptoms:
In GUI "Security ›› Reporting : Application : Charts" filtering "View By" as IP Intelligence "Last Week", "Last Month" and "Last Year" reports show the "Safe" category instead of "Aggregated".

Conditions:
-- ASM is provisioned
-- The system is under heavy traffic
-- The number of stats records per report period (5 min) is higher than 10,000

Impact:
Inaccurate Last Week IPI reporting

Fixed Versions:
16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1038741-4 : NTLM type-1 message triggers "Unparsable request content" violation.

Links to More Info: BT1038741

Component: Application Security Manager

Symptoms:
When internal parameter for "authorization header decode failure" is disabled, Valid NTLM type-1 message will be blocked with "Unparsable request content" violation.

Conditions:
Disable internal parameter ignore_authorization_header_decode_failure

Impact:
Valid NTLM Type-1 message will be blocked by ASM.

Workaround:
Enable internal parameter ignore_authorization_header_decode_failure, ASM will not block the NTLM type-1 message request

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1038733-4 : Attack signature not detected for unsupported authorization types.

Links to More Info: BT1038733

Component: Application Security Manager

Symptoms:
ASM does not detect an Unsupported Bearer authorization type that contains header value in base64 format.

Conditions:
HTTP Request containing Bearer Authorization header which
 contain a matching signature in base64 encoded format.

Impact:
ASM does not raise a violation and does not block the request.

Workaround:
N/A

Fix:
ASM decodes base64 value in Bearer Authorization header and perform attack signature matching, raises violation and block request if it contains attack.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1038669-1 : Antserver keeps restarting.

Links to More Info: BT1038669

Component: SSL Orchestrator

Symptoms:
Antserver keeps restarting, as indicated in /var/log/ecm:

notice ant_server.sh[5898]: starting ant_server on 057caae1e95a11d7ecd1118861fb49f30ce1c22d
notice ant_server.sh[6311]: no ant_server process
notice ant_server.sh[6312]: check: no running ant_server

Conditions:
The Secure Web Gateway is provisioned on i15800 or i15820 platform.

Impact:
User connection will be reset if request or response analytics agent is deployed with per-request policy.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2, 15.1.5


1038629-4 : DTLS virtual server not performing clean shutdown upon reception of CLOSE_NOTIFY from client

Links to More Info: BT1038629

Component: Local Traffic Manager

Symptoms:
With the DTLS virtual server, when client sends the CLOSE_NOTIFY alert, BIG-IP is simply closing the connection without sending the CLOSE_NOTIFY back to client as well as the backend server. This causes the backend server to not close/shutdown the connection completely.

Conditions:
This issue occurs with all DTLS virtual servers which has associated client-ssl and server-ssl profiles.

Impact:
Backend server and client will have a dangling connection for certain period of time (Based on the timeout implementation at the respective ends).

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


1038445-1 : During upgrade to 16.1, the previous FPS Engine live update remains active

Links to More Info: BT1038445

Component: Fraud Protection Services

Symptoms:
On a BIG-IP system with FPS JS engine Live Update, after upgrade to 16.1.x , the old live update is not replaced by the engine in the build.

Conditions:
-- BIG-IP with FPS JS engine Live Update
-- Upgrade to 16.1.x
-- FPS / DataSafe / AWAF provisioned.

Impact:
In upgrade from 15.1 or older, this sometimes results in the device staying offline.

Workaround:
Installing a new, 16.1 FPS Engine update will fix the issue (where available).

Alternatively, running these commands fixes the issue, but results in the BIG-IP going offline for a few minutes.

rm -rf /var/datasync/updates/*
touch /etc/datasync/regenerate_all
tmsh -q -c 'cd datasync-global/; delete security datasync update-file update-file-versafe_js*'
bigstart restart tmm

Fixed Versions:
17.0.0, 16.1.2.2


1037457-1 : High CPU during specific dos mitigation

Links to More Info: BT1037457

Component: Application Security Manager

Symptoms:
CPU is high.

Conditions:
A dos attack with specific characteristic is active and the policy is configured in a specific way.

Impact:
While the attack is mitigated on the BIG-IP system and does not reach the server, the CPU of the BIG-IP increases and this may impact other services on the BIG-IP device.

Workaround:
N/A

Fix:
A specific high CPU scenario during dos attacks was fixed.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1037181-1 : TMM may crash while processing HTTP traffic

Links to More Info: K96924184, BT1037181


1036521-1 : TMM crash in certain cases

Links to More Info: BT1036521

Component: Application Security Manager

Symptoms:
TMM crash in certain case when dosl7 is attached

Conditions:
TMM is configured with dosl7

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1036305-5 : "Mandatory request body is missing" violation in staging but request is unexpectedly blocked

Links to More Info: BT1036305

Component: Application Security Manager

Symptoms:
Request is blocked on a staged URL for the violation "Mandatory request body is missing".

Conditions:
- "Mandatory request body is missing" violation is set for blocking
- The URL is in staging
- "Mandatory request body is missing" is enabled on the URL

Impact:
Requests are blocked unexpectedly

Workaround:
None

Fix:
This defect is closely related to ID1036305 and both defects are fixed together

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1


1036285-1 : Enforce password expiry after local user creation

Links to More Info: BT1036285

Component: TMOS

Symptoms:
When a local user is created, the password is not expired.
[root@bigip1:Active:Standalone] config # chage -l testuser
Last password change : Feb 02, 2021
Password expires : never
Password inactive : never
Account expires : never
Minimum number of days between password change : 0
Maximum number of days between password change : 99999
Number of days of warning before password expires : 7

Conditions:
A local user is created

Impact:
The new user's password is not set to expired automatically.

Fix:
When the local user is created, the password is expired.

Behavior Change:
When the local user is created, the password is expired.
When the user logins for the first time, the password change prompt appears.

Fixed Versions:
17.0.0, 16.1.3


1036169-4 : VCMPD rsync server max connection limit: guest "Exit flags for PID 17299: 0x500".

Links to More Info: BT1036169

Component: Local Traffic Manager

Symptoms:
Guestagentd will log the message "Exit flags for PID <PID>:0x500" in guest ltm log, if vcmp host rsync server current active connection is more than 4.

Conditions:
-- vCMP guest.
-- Rsync transfer frequency is 10 seconds between vCMP guest to vCMP host.
-- more than 4 vCMP guests.

Impact:
Guest LTM logs fill with "Exit flags for PID <PID>: 0x500".

Workaround:
N/A

Fix:
Modify sys db vcmp.dynamic_rsync_conn_allowed value false -> It will set the max connection limit to 4. (Default setting)
modify sys db vcmp.dynamic_rsync_conn_allowed value true -> It will set the max connection limit to max number of guest that slot supports.

Restart vcmpd by running 'bigstart restart vcmpd'

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1036057-1 : Add support for line folding in multipart parser.

Links to More Info: BT1036057

Component: Application Security Manager

Symptoms:
RFC 2616 allowed HTTP header field values to be extended over multiple lines by preceding each extra line with at least one space or horizontal tab. This was then deprecated by RFC 7230.

The multipart parser of ASM does not support the multiple line header, so these requests cause false positives.

Conditions:
Multiline header in multipart request

Impact:
False positives.

Workaround:
None

Fix:
Introduced a new ASM internal parameter: multipart_allow_multiline_header

Note: default value is 0 (disabled)
Note: enabling/disabling the feature requires asm restart that triggers the unit going offline for a short time period. If the unit is a part of a high availability (HA) cluster, failover to the other unit will occur. If it is a standalone unit, traffic disruption until the unit comes back to online.

- Enable multiline header support
# /usr/share/ts/bin/add_del_internal add multipart_allow_multiline_header 1
# bigstart restart asm

- Disable multiline header support
# /usr/share/ts/bin/add_del_internal add multipart_allow_multiline_header 0
# bigstart restart asm

Behavior Change:
Introduced a new ASM internal parameter: multipart_allow_multiline_header

Note: default value is 0 (disabled)
Note: enabling/disabling the feature requires asm restart that triggers the unit going offline for a short time period. If the unit is a part of a high availability (HA) cluster, failover to the other unit will occur. If it is a standalone unit, traffic disruption until the unit comes back to online.

- Enable multiline header support
# /usr/share/ts/bin/add_del_internal add multipart_allow_multiline_header 1
# bigstart restart asm

- Disable multiline header support
# /usr/share/ts/bin/add_del_internal add multipart_allow_multiline_header 0
# bigstart restart asm

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


1035853-1 : Transparent DNS Cache can consume excessive resources.

Links to More Info: K41415626, BT1035853

Component: Global Traffic Manager (DNS)

Symptoms:
Under certain conditions, the Transparent DNS Cache can consume excessive resources.

Conditions:
- The BIG-IP system is licensed for DNS Services
- Transparent DNS Cache is configured on a virtual server

Impact:
Excessive resource consumption, which can lead to increased server-side load.

Workaround:
N/A

Fix:
The Transparent DNS Cache now consumes resources as expected.

Fixed Versions:
17.0.0, 16.1.2, 15.1.5, 14.1.4.5, 13.1.5


1035729-1 : TMM may crash while processing traffic http traffic

Links to More Info: K57111075, BT1035729


1035361-4 : Illegal cross-origin after successful CAPTCHA

Links to More Info: BT1035361

Component: Application Security Manager

Symptoms:
After enabling CAPTCHA locally on BIG-IP with brute force, after configured login attempts, CAPTCHA appears, but after bypassing the CAPTCHA successfully the user receives a support ID with cross-origin violation.

Conditions:
- brute force with CAPTCHA mitigation enforced on login page.
- cross-origin violation is enforced on the login page.
- user fails to login until CAPTCHA appears
- user inserts the CAPTCHA correctly

Impact:
- blocking page appears.
- on the event log cross-origin violation is triggered.

Workaround:
- disable cross-origin violation enforcement.

Fix:
Fixing origin header offset in reconstruct challenge request.

Fixed Versions:
16.1.2.2, 15.1.5.1, 14.1.5


1035133-4 : Statistics data are partially missing in various BIG-IQ graphs under "Monitoring" tab

Links to More Info: BT1035133

Component: Application Visibility and Reporting

Symptoms:
In various BIG-IQ GUI forms under the "Monitoring" tab (for example Monitoring -> Local Traffic -> HTTP), data for some time periods are missing.

Multiple "Unexpected end of ZLIB input stream" errors appear in BIG-IQ DCD logs under /var/log/appiq/gc_agent-manager.log

Conditions:
BIG-IP is attached to BIG-IQ, traffic volume is high

Impact:
Data in BIG-IQ are missing therefore some graphs show incorrect information

Workaround:
None

Fix:
Fixed an issue with missing statistics.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1034941-1 : Exporting and then re-importing "some" XML policy does not load the XML content-profile properly

Links to More Info: BT1034941

Component: Application Security Manager

Symptoms:
Exporting and then re-importing an existing ASM policy in XML format does not load its XML content-profile properly. An XML content-profile containing a firewall configuration shows the 'Import URL' as N/A for most .xsd files.

Conditions:
Corner case, when the second import_url value is null

Impact:
The import_url field is set as N/A for all files, except for the first one

Workaround:
None

Fix:
Fixed incorrect XML export when we've multiple import_url in content-profile

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1034617-1 : Login/Security Banner text not showing in console login.

Links to More Info: BT1034617

Component: TMOS

Symptoms:
Setting the Login/Security Banner causes the banner to appear when connecting via the management port and not when connecting via the console.

Conditions:
-- The login banner is configured.
-- You log into the command line.

Impact:
Mismatch in displaying banner text with management and console logins.

Workaround:
Configure an identical banner for ssh sessions by following https://support.f5.com/csp/article/K6068.

Fix:
The banner text now displays for both management and console logins.

Fixed Versions:
17.0.0, 16.1.2


1034589-1 : No warning is given when a pool or trunk that was in use by an high availability (HA) Group is deleted from the configuration.

Links to More Info: BT1034589

Component: TMOS

Symptoms:
It is possible to delete a Pool or Trunk from the configuration while one or more high availability (HA) Groups still reference it.

As a result, the configuration of affected high availability (HA) Groups is automatically and silently adjusted (i.e. the deleted object is no longer referenced by any high availability (HA) Group).

The lack of warning about this automatic change could lead to confusion.

Conditions:
A pool or trunk is deleted from the configuration while still being referenced from a high availability (HA) Group.

Impact:
The automatic and silent removal of the deleted object from all high availability (HA) Groups may go unnoticed by BIG-IP Administrators, with potential consequences on the failover behavior of the devices.

Fix:
A warning message is logged to /var/log/ltm, and is also presented in tmsh.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1034329-1 : SHA-512 checksums for BIG-IP Virtual Edition (VE) images available on downloads.f5.com

Links to More Info: BT1034329

Component: TMOS

Symptoms:
SHA-512 checksums for BIG-IP Virtual Edition images are not available on downloads.f5.com.

Conditions:
You wish to perform a SHA-512 validation of the BIG-IP Virtual Edition images.

Impact:
Cannot download the SHA-512 checksum for checksums for BIG-IP Virtual Edition images.

Workaround:
None

Fix:
Added SHA-512 checksum for ISOs and BIG-IP Virtual Edition images to downloads.f5.com.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1033837-1 : REST authentication tokens persist on reboot

Links to More Info: K23605346, BT1033837

Component: TMOS

Symptoms:
REST authentication tokens persist across reboots. Current best practices require that they be invalidated at boot.

Conditions:
-- REST authentication token in use
-- BIG-IP restarts

Impact:
REST authentication tokens are not invalidated at boot.

Workaround:
None

Fix:
REST authentication tokens are invalidated at boot. Additionally, a new db variable is introduced: httpd.matchclient which is used to validate that the IP address of the creator of the token is the only valid user of that token.

Behavior Change:
Existing REST tokens are now invalidated on boot; new tokens will need to be generated after a reboot.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1033829-3 : Unable to load Traffic Classification package

Links to More Info: BT1033829

Component: Traffic Classification Engine

Symptoms:
After installation and initial configuration, the latest Traffic Classification IM package fails to load.

Conditions:
This type of behavior is observed when the system is configured as follows,

1. LTM provisioned
2. Create virtual servers with classification profile
3. Then provision PEM module
4. Do a Hitless upgrade

Impact:
The latest Traffic Classification IM package fails to load.

Workaround:
Once the TMM is restarted after the issue, the latest IM is loaded.

Fix:
The traffic classification package now loads successfully.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5


1033017-1 : Policy changes learning mode to automatic after upload and sync

Links to More Info: BT1033017

Component: Application Security Manager

Symptoms:
When newly created policies are synchronized, the learning states of the policies are different.

Conditions:
-- Active/Active high availability (HA) setup in sync-failover device group with ASM enabled.
-- Sync a new policy configured with disabled/manual learning mode.

Impact:
Learning mode changes from disabled to automatic on peer device after sync, so learning modes differ on the peer devices.

Workaround:
1. On the peer device, change the learning mode to disabled.
2. Push sync from the originator device.

Both devices are then in sync and policies have the same learning mode (disabled), so operations complete as expected.

Fix:
The sync operation no longer attempts to keep the learning flags enabled on the receiving device.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1032949-1 : Dynamic CRL configured with client authentication profile as "Request" causes connection termination without certificate.

Links to More Info: BT1032949

Component: TMOS

Symptoms:
When you configure Dynamic CRL and set the client authentication as "Request", the handshake fails when clients do not supply a certificate.

Conditions:
Clientssl profile configured with the following:

1. Dynamic CRL
2. Client Authentication enabled with "Request" option

Impact:
SSL handshake fails

Workaround:
Workaround 1:
Use Static CRL

Workaround2:
Use Client authentication with either "Require" or "Ignore"

Workaround3:
Disable TLS1.2 and below versions in the Client SSL profile.
Which means allow only TLS1.3 traffic.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5


1032797-1 : Tmm continuously cores when parsing custom category URLs

Links to More Info: BT1032797

Component: SSL Orchestrator

Symptoms:
Tmm crashes when trying to parse more than 256 custom category URLs.

Conditions:
-- More than 256 URLs defined in custom url-category.

Impact:
Traffic disrupted while tmm restarts.

Fix:
TMM no longer crashes and it can parse more than 256 custom category URLs.

Fixed Versions:
17.0.0, 16.1.2, 15.1.5


1032737-2 : IPsec: tmm SIGSEGV in getlocaladdr in ikev2_initiate

Links to More Info: BT1032737

Component: TMOS

Symptoms:
Tmm crashes while passing IPsec traffic

Conditions:
Wildcard selectors are used.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
Avoid the core dump by adding checks.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1


1032689 : UlrCat Custom db feedlist does not work for some URLs

Links to More Info: BT1032689

Component: Traffic Classification Engine

Symptoms:
The first URL getting normalized is not classified.

Conditions:
The URL contains caps or 'www' is not getting categorized in few cases.

Impact:
The 'custom' category is not displayed for all the apps available in the feedlist file.

Workaround:
None

Fix:
Starting normalized lines with \n.

Fixed Versions:
16.1.2, 15.1.4.1, 14.1.4.5


1032553-5 : Core when virtual server with destination NATing receives multicast

Component: TMOS

Symptoms:
TMM cores when the virtual server processes a multicast packet.

Conditions:
-- Virtual server that can match multicast, e.g. destination address 0.0.0.0:any and mask any.
-- LTM and AFM provisioned.
-- Virtual server is using destination NATing.
-- Virtual server uses fastL4.
-- Multicast route setup, e.g. with Zebos.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Add a virtual server to specifically match multicast without destination NATing.

Fix:
TMM does not crash.

Fixed Versions:
16.1.3.3, 15.1.8


1032513-3 : TMM may consume excessive resources while processing MRF traffic

Links to More Info: K28405643, BT1032513


1032405-1 : TMUI XSS vulnerability CVE-2021-23037

Links to More Info: K21435974, BT1032405


1032077-1 : TACACS authentication fails with tac_author_read: short author body

Links to More Info: BT1032077

Component: TMOS

Symptoms:
If a TACACS user is part of a group with 10s of attribute value pairs (AVPs) were the length of all the avp's combined is such that the authorization reply message from the TACACS server is segmented, the login will fail.

The error message that is logged when the login fails is
"tac_author_read: short author body, 4468 of 6920: Operation now in progress" Where the numbers 4468 and 6920 will vary.

Conditions:
- TACACS authentication
- TACACS user that is part of a group where the combined length of the AVPs is greater then the largest TCP segment the TACACS server is able to send.

Impact:
User is unable to login.

Workaround:
If possible, reduce the number of attributes of the TACACS group or user.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1031901-2 : In HTTP2 deployment, RST_STREAM sent to client if server in CLOSING state is picked

Links to More Info: BT1031901

Component: Local Traffic Manager

Symptoms:
When request from client is forwarded to server which is in CLOSING state due to server sent GOAWAY but not yet close the connection, request will be failed to be forwarded to server and RST_STREAM will be sent to client

Conditions:
-- Virtual Server with HTTP2 profile
-- There is an open connection from BIG-IP to the server.
-- The server sends a GOAWAY message to the BIG-IP and the connection is kept open.
-- The client sends a request to BIG-IP, BIG-IP picks the connection mentioned above to forward the request to

Impact:
Traffic from the specific client is interrupted

Workaround:
N/A

Fix:
In HTTP2 deployment, RST_STREAM is no longer sent to client if server in CLOSING state is picked

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1


1031609-1 : Improve nethsm-thales-install.sh and nethsm-thales-rfs-install.sh to be compatible with Entrust Client v12.60.10 package.

Links to More Info: BT1031609

Component: Local Traffic Manager

Symptoms:
Formerly Thales now nShield/Entrust has changed the directory structure of their client package and also added new libraries. Due to this change, install script will be incompatible with v12.60.10 onwards.

Conditions:
Upgrading to PKCS11 client package v12.60.10.

Impact:
The installation script will fail while extracting the package.

Workaround:
N/A

Fix:
Extracted all the tarballs in the target directory to resolve the issue.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1


1031425-3 : Provide a configuration flag to disable BGP peer-id check.

Links to More Info: BT1031425

Component: TMOS

Symptoms:
A fix for ID 945265 (https://cdn.f5.com/product/bugtracker/ID945265.html) introduced strict checking of a peer-id. This check might be not desired in some configurations.

Conditions:
EBGP peering with two routers in the same autonomous system, configured with the same peer-id.

Impact:
BIG-IP will not pass the NLRIs between two eBGP peers. The following message can be seen in debug logs:
172.20.10.18-Outgoing [RIB] Announce Check: 0.0.0.0/0 Route Remote Router-ID is same as Remote Router-ID

Workaround:
Change peer-ids to be unique on eBGP peers.

Fix:
New, neighbor-specific, af-specific configuration option is provided to allow routes to be passed to external peers sharing the same router-id. The check is done on egress, so the configuration should be changed towards the peer that is supposed to receive a route.

router bgp 100
 bgp graceful-restart restart-time 120
 neighbor as200 peer-group
 neighbor as200 remote-as 200
 neighbor as200 disable-peerid-check
 neighbor 172.20.8.16 peer-group as200
 neighbor 172.20.8.16 disable-peerid-check
 neighbor 172.20.10.18 peer-group as200
 neighbor 172.20.10.18 disable-peerid-check
 !
 address-family ipv6
 neighbor as200 activate
 neighbor as200 disable-peerid-check
 neighbor 172.20.8.16 activate
 neighbor 172.20.8.16 disable-peerid-check
 neighbor 172.20.10.18 activate
 neighbor 172.20.10.18 disable-peerid-check
 exit-address-family

When configured on a single neighbor it will cause session to be re-established.
When configured on a peer-group a manual session restart is required for changes to take effect.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1031357-2 : After reboot of standby and terminating peer, some IPsec traffic-selectors are still online

Links to More Info: BT1031357

Component: TMOS

Symptoms:
HA Standby marks traffic selectors up when they are actually down on the Active device.

Conditions:
-- High availability (HA) configured and mirroring configured
-- IPsec tunnels up on Active
-- Reboot Standby
-- Standby starts correctly and all SAs are mirrored
-- Tunnel(s) go down on Active

Impact:
-- Traffic Selector is incorrectly marked up on the Standby when it is actually down on the Active.
-- While this is cosmetic, the information is misleading.

Workaround:
None

Fix:
After Standby reboot and deleting IPsec tunnels, the
traffic selectors on the Standby are marked in down state.

Fixed Versions:
17.0.0, 16.1.2


1031269 : TMM may consume excessive resources when processing logging profiles

Links to More Info: K17514331, BT1031269


1030881-1 : [GTM] Upgrade failure - 01070022:3: The monitor template min was not found.

Links to More Info: BT1030881

Component: Global Traffic Manager (DNS)

Symptoms:
GTM config load fails with the following error message:
01070022:3: The monitor template min was not found.

Conditions:
Min or required feature is applied to GTM generic host and upgrade from v15.x to v16.x.

Impact:
GTM config load fails.

Workaround:
Delete the special config for the generic host server and add it back after upgrade.

Fixed Versions:
17.0.0, 16.1.2.2


1030853-1 : Route domain IP exception is being treated as trusted (for learning) after being deleted

Links to More Info: BT1030853

Component: Application Security Manager

Symptoms:
Traffic is considered trusted for learning even though a trusted IP exception was deleted.

Conditions:
Creating and deleting a route domain-specific IP exception

Impact:
Traffic learning suggestions scores are miscounted.
In automatic policy builder mode the policy can be updated by the policy builder based on the wrong score counting.

Workaround:
Stop and restart learning for the relevant policy

Fix:
When a route domain IP Exception configured for trusted learning is deleted, the upcoming suggestions scores will be calculated correctly without considering the deleted IP trusted.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1030845-1 : Time change from TMSH not logged in /var/log/audit.

Links to More Info: BT1030845

Component: TMOS

Symptoms:
Whenever time is changed, the message is not logged in /var/log/audit.

Conditions:
This occurs when the system time is changed manually using either the 'date' command or 'tmsh modify sys clock'.

Impact:
The time change is not logged to the audit log.

Workaround:
N/A

Fix:
Time changes are now logged to the audit log.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1030689-1 : TMM may consume excessive resources while processing Diameter traffic

Links to More Info: K82793463, BT1030689


1030645-4 : BGP session resets during traffic-group failover

Links to More Info: BT1030645

Component: TMOS

Symptoms:
BGP session might be hard reset during a traffic group failover. The following log is displayed:

BGP[11111]: BGP : %BGP-5-ADJCHANGE: neighbor 1.1.1.1 Down Peer reset due to nh address change

Conditions:
Floating self-ips defined on a single vlan/subnet, with different traffic-groups configured.

Impact:
BGP session goes down during traffic-group failover.

Fix:
Soft clear is performed instead.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1030133-2 : BD core on XML out of memory

Links to More Info: BT1030133

Component: Application Security Manager

Symptoms:
Missing error handling in lib xml parser.

Conditions:
XML parser going out of memory.

Impact:
ASM traffic disrupted while bd restarts.

Workaround:
None

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1029949-2 : IPsec traffic selector state may show incorrect state on high availability (HA) standby device

Links to More Info: BT1029949

Component: TMOS

Symptoms:
IPsec traffic selector state can be viewed in the config utility or by tmsh with the "tmsh show net ipsec traffic-selector" command. On an high availability (HA) standby device, some selector states may be incorrect.

Conditions:
-- High availability (HA) environment
-- Standby reboots or in some way, such as a tmm restart, is forced to re-learn all the mirrored IPsec security associations (SAs).

Impact:
There is no functional impact. The issue is that a selector may incorrectly appear down in one or both directions.

Workaround:
When the tunnel re-keys on the high availability (HA) active device, the selector state shows the correct value.

Fix:
IPsec traffic selectors show the correct state after the high availability (HA) standby device reboots.

Fixed Versions:
17.0.0, 16.1.2


1029897-1 : Malformed HTTP2 requests can be passed to HTTP/1.1 server-side pool members.

Links to More Info: K63312282, BT1029897

Component: Local Traffic Manager

Symptoms:
The BIG-IP system may pass malicious requests to server-side pool members.

Conditions:
1. The BIG-IP LTM has one or more virtual servers configured to proxy HTTP/2 requests from the client-side to HTTP/1 requests on the server-side.
2. An HTTP/2 client sends a request with one of the following issues and the BIG-IP passes it to the server-side pool members:
a. H2.TE request line injection
   I. An HTTP/1 request embedded within an HTTP/2 pseudo-header value
   II. Individual carriage return (CR) or line feed (LF) allowed within an HTTP/2 pseudo-header
b. Request line injection (folder traps)
c. Request line injection (rule bypass)

Impact:
Malicious HTTP/2 requests can be translated to HTTP/1 requests and sent to the pool member web server. Depending on the behavior of the pool member web server, this can lead to an HTTP request smuggling attack. When the affected virtual server is configured with the OneConnect profile, an attacker might be able to impact the responses sent to a different client.

Workaround:
You can configure the BIG-IP ASM system or Advanced WAF to block an HTTP/1 request that is embedded within an HTTP/2 pseudo header value from being sent to the backend server.

Fix:
This has been fixed so that client requests are appropriately rejected by BIG-IP.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1029869-1 : Use of ha-sync script may cause gossip communications to fail

Links to More Info: BT1029869

Component: SSL Orchestrator

Symptoms:
Using the ha-sync script on platforms in a sync-failover device group may cause gossip communications to fail.

Conditions:
This issue occurs after using the ha-sync script on devices that are in a sync-failover device-group.

Impact:
When the gossip communications fail, SSL Orchestrator will be unable to communicate iAppLX configuration from one device to the other. This can lead to deployment failures upon redeployment of SSL Orchestrator topologies.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1029689-2 : Incosnsitent username "SYSTEM" in Audit Log

Links to More Info: BT1029689

Component: Application Security Manager

Symptoms:
The Security Policy Auto Log in ASM displays the system component that triggered the event. The component name is sometimes shown as 'SYSTEM', other times shown as 'System'

Conditions:
The value is "SYSTEM" when Apply Policy was initiated locally.
The value is "System" when Apply Policy was initiated by the peer unit

Impact:
Component name inconsistency causing confusion

Workaround:
None

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1029629-1 : TMM may crash while processing DNS lookups

Links to More Info: K03755971, BT1029629


1029585-1 : Use of ha-sync script may cause platforms in a sync-failover device group to fall out of sync

Links to More Info: BT1029585

Component: SSL Orchestrator

Symptoms:
Following the use of the ha-sync script on platforms in a sync-failover device group to become out of sync.

Conditions:
This can occur following the use of the ha-sync script.

Impact:
Both platforms in the sync-failover device group to fall out of sync. Forcing the admin to perform a device-group sync operation.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1029397-4 : Tmm may crash with SIP-ALG deployment in a particular race condition

Links to More Info: BT1029397

Component: Service Provider

Symptoms:
Tmm crashes in SIP-ALG deployment, when lsn DB callback is returned from a different tmm, and the SIP connection has been lost on tmm where the REGISTER request arrived.

Conditions:
--- SIP-ALG is deployed
--- Processing of SIP REGISTER message at server side
--- lsn DB entry is mapped to a different tmm

Impact:
Traffic disrupted while tmm restarts

Workaround:
NA

Fix:
Tmm no longer crashes in this race condition

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6


1028969-1 : An unused traffic-selector can prevent an IKEv2 IPsec tunnel from working

Links to More Info: BT1028969

Component: TMOS

Symptoms:
If both IKEv1 and IKEv2 try to listen to the same self IP address on the BIG-IP for a local tunnel IP address, only one can win, and previously a v2 ike-peer would be blocked if a v1 listener managed to get installed first.

If a partial tunnel config exists, with no ike-peer and only ipsec-policy and traffic-selector definitoins, this is understood to be IKEv1 implicitly, by default, and will install a v1 listener for the IP address and port.

Then if a fully configured ike-peer is added using IKEv2, it can fail to establish the required listener for v2 when an existing v1 listener is squatting on that IP address.

Conditions:
Conflict between IKEv2 and IKEv1 on the same IP address when:

-- a v2 ike-peer has local tunnel IP address X

-- a v1 ike-peer, or a traffic-selector with no peer at all, has the same local IP address X

Impact:
An IKEv2 tunnel can fail to negotiate when v2 packets cannot be received on a local IP address because a listener for IPsec cannot be established on that IP address.

Workaround:
You can avoid conflict between v1 and v2 by:

-- removing a traffic-selector not in use (which is v1)

-- avoiding use of the same local IP in both v1 and v2 definitions of ike-peer

Fix:
The fix gives precedence to IKEv2, so any pre-existing IKEv1 listener is simply removed from an IP address whenever a v2 listener is desired for that IP address.

This means IKEv1 can never be negotiated on a local IP address which is also in use by an IKEv2 ike-peer.

Importantly, this fix may cause tunnels to be permanently down after an upgrade. Prior to this change it was possible to have IKEv1 and IKEv2 tunnels working on the same self IP, but in that scenario some tunnels would intermittently fail to establish and the success of the tunnel establishment depended on whether the BIG-IP was the Initiator. IKEv1 and IKEv2 tunnels on the same self IP may still work after this change, but are not considered a valid or supported config by F5.

Fixed Versions:
17.0.0, 16.1.2


1028773-1 : Support for DNS Over TLS

Links to More Info: BT1028773

Component: Global Traffic Manager (DNS)

Symptoms:
The BIG-IP system does not have support for DNS over TLS (DoT).

Conditions:
This is encountered if you wish to combine a clientssl profile with the dns profile on a virtual server.

Impact:
Performance is degraded.

Workaround:
None

Fix:
Clients can now initiate DNS over TLS requests to virtual servers that have the clientssl and dns profiles attached.

Fixed Versions:
17.0.0, 16.1.2


1028669-7 : Python vulnerability: CVE-2019-9948

Links to More Info: K28622040, BT1028669


1028573-6 : Perl vulnerability: CVE-2020-10878

Links to More Info: K40508224, BT1028573


1028497-7 : libexpat vulnerability: CVE-2019-15903

Links to More Info: K05295469, BT1028497


1028473-1 : URL sent with trailing slash might not be matched in ASM policy

Links to More Info: BT1028473

Component: Application Security Manager

Symptoms:
Request sent to a specific URL with added trailing slash may not be handled according to expected policy.

Conditions:
-- Request is sent with URL containing trailing slash.
-- Security policy contains the same URL, but without slash.

Impact:
URL enforcement is not done according to expected rules.

Workaround:
Add configuration for same URL with added trailing slash.

Fix:
URL with trailing slash is now handled as expected.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1028269-2 : Device using CGNAT + subscriber discovery license shows unknown for pem_subscriber-id.

Links to More Info: BT1028269

Component: Carrier-Grade NAT

Symptoms:
On a BIG-IP device configured with CGNAT + subscriber discovery license, the LSN log shows "unknown" for the pem_subscriber-id field.

Conditions:
-- PEM and CGNAT enabled
-- RADIUS and CGNAT traffic are in different route domains

Impact:
LSN log shows "unknown" for the pem_subscriber-id field.

Workaround:
N/A

Fix:
Subscriber-id now shows correctly in the LSN log after it is added with CGNAT provisioned check in subscriber-discovery.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1028109-1 : Detected attack signature is reported with the wrong context.

Links to More Info: BT1028109

Component: Application Security Manager

Symptoms:
A detected attack signature on a multipart request might be reported with the wrong context.

Conditions:
Attack signature is detected in a multipart request.

Impact:
Reporting of the signature might contain the wrong context.

Workaround:
N/A

Fix:
All detected signatures on multipart requests are reported with the correct context.

Fixed Versions:
17.0.0, 16.1.2


1027657-4 : Monitor scheduling is sometimes inconsistent for "require M from N" monitor rules.

Links to More Info: BT1027657

Component: Global Traffic Manager (DNS)

Symptoms:
Inconsistent monitor intervals for resource monitoring.

Conditions:
"require M from N" monitor rules configured.

Impact:
Monitor status flapping.

Workaround:
Do not use "require M from N" monitor rules.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5


1027217-1 : Script errors in Network Access window using browser.

Links to More Info: BT1027217

Component: Access Policy Manager

Symptoms:
1. Users may receive JavaScript errors in their browser when starting Network Access resources.
2. User resources may fail to display when accessing a Full webtop.
3. When logging out, users may be redirected to https://apm-virtual-server/vdesk/undefined and get a blank page
4. Logon Page from SWG Policies may fail to display inside a browser.

Conditions:
The issue can be observed with at least one of these conditions.

1. Accessing APM virtual server using a browser.
2. Accessing APM resources via a Full webtop.
3. Starting APM resources via a Full webtop.
4. Accessing Logon Page in SWG deployment.

Impact:
1. Users cannot start Network Access resources.
2. Users are unable to logout properly from full webtop.
3. Logon page is not rendered and users will not be able to access resources.

Workaround:
1. Log into BIG-IP.
2. mount -o remount,rw /usr/.
3. Add "response_chunking 2" to _tmm_apm_portal_http in "/usr/lib/tmm/tmm_base.tcl" Example:

profile http _tmm_apm_portal_http {
    max_header_size 32768
    max_header_count 64
    known_methods "CONNECT DELETE GET HEAD LOCK OPTIONS POST PROPFIND PUT TRACE UNLOCK"
    response_chunking 2
}

4. Restart tmm once the above param is added.
5. Garbage values in JavaScript aren't inserted after this change.
6. Remount the /usr directory as read-only.
  mount -o remount,ro /usr/
-------------------------

Fix:
The logon page now renders correctly, resources are properly displayed on the webtop, you can start resources without JavaScript errors, and you no longer receive blank pages when logging out.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1


1026605-6 : When bigd.mgmtroutecheck is enabled monitor probes may be denied for non-mgmt routes

Links to More Info: BT1026605

Component: Local Traffic Manager

Symptoms:
When bigd.mgmtroutecheck is enabled and monitors are configured in a non-default route-domain, bigd may calculate the interface index incorrectly. This can result in monitor probes improperly being denied when they egress a non-mgmt VLAN. Or monitor probes might be allowed to egress the management interface

Conditions:
-- Bigd.mgmtroutecheck is enabled.
-- Monitor probes in a non-default route domain
-- More than one VLAN configured in the route-domain

Impact:
Monitor probes may be denied even thought they egress a non-mgmt VLAN.

Monitor probes may be improperly allowed out a mgmt interface.

/var/log/ltm:
err bigd.0[19431]: 01060126:3: Health check would route via mgmt port, node fc02:0:0:b::1%1. Check routing table.

bigd debug log:
:(_do_ping): probe denied; restricted egress device and route check [ tmm?=false td=true tr=false addr=fc02:0:0:b::1%1:0 srcaddr=none ]

Workaround:
Disable bigd.mgmtroutecheck, reduce the number of VLANs inside the route-domain

Fix:
The Bigd interface index is now calculated properly

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1026549-1 : Incorrect BIG-IP Virtual Edition interface state changes may be communicated to mcpd

Links to More Info: BT1026549

Component: TMOS

Symptoms:
For some BIG-IP Virtual Edition drivers, TMM may occasionally communicate an incorrect interface state change that might cause the interface to flap.

Conditions:
-- BIG-IP Virtual Edition using ixlv, ixvf, mlx5, or xnet drivers.
-- More TMMs and interfaces configured make this issue more likely to happen, but it happens randomly.

Impact:
In the case where the interface is part of a trunk a flap will occur when this happens.

There may be other as-yet unknown impacts for this issue.

Workaround:
Use a different VE driver than one of the ones listed above.

Fix:
BIG-IP Virtual Edition drivers no longer communicate incorrect interface states to mcpd.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1026005-1 : BIG-IP Virtual Edition (VE) does NOT preserve the order of NICs 5-10 defined in the VMware ESXi hypervisor and NSXT platforms.

Links to More Info: BT1026005

Component: Local Traffic Manager

Symptoms:
The ordering of NICs 5-10 in VMware ESXi is based on PCI coordinates for the first boot and the order is ensured based on the /etc/ethmap script written by the kernel during initialization. BIG-IP VE does not follow/maintain the NIC order defined in the VMware ESXi hypervisor.

Conditions:
Using 5-10 interfaces, swap/remove/add an interface at the hypervisor level.

Impact:
When using 5-10 NICs in VMware ESXi and NSXT platforms, automation is prohibited due to BIG-IP VE not maintaining the NIC order defined in the hypervisor.

Workaround:
N/A

Fix:
Enabled BIG-IP VE scripts to honor the NIC order defined by the user in the VMware ESXi hypervisor and NSXT platforms.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.5


1025529-2 : TMM generates core when iRule executes a nexthop command and SIP traffic is sent

Links to More Info: BT1025529

Component: Service Provider

Symptoms:
If an iRule uses the 'nexthop' command to select a VLAN for a virtual server, TMM may crash.

Conditions:
-- Virtual server with SIP profile and iRule that executes a 'nexthop' command
-- SIP network traffic occurs

Impact:
Traffic disrupted while TMM restarts.

Workaround:
Avoid using 'nexthop vlan' in an iRule in a SIP environment.

Fix:
iRule creation does not cause any TMM core.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.4.1, 14.1.4.5


1025261-3 : Restjavad uses more resident memory in control plane after software upgrade

Links to More Info: BT1025261

Component: TMOS

Symptoms:
The restjavad process immediately reserves more memory and the process size (as shown by RSS) increases as the starting heap size has been made to be the same as maximum heap size for performance reasons.

(Note the process name displays as 'java', but there are multiple independent Java processes on the system. The parent process of restjavad is 'runsv restjavad', and the command line arguments may have 'logging' in them.)

For restjavad with the default size, the increase is usually 200 MB-300 MB.

The increase is particularly apparent where restjavad.useextramb is set to the value 'true' and provision.extramb is set to a high value but restjavad had not required that much extra memory previously.

Conditions:
After upgrading to a BIG-IP software version with the fix for ID 776393 ( https://cdn.f5.com/product/bugtracker/ID776393.html ), where more memory has been allocated for restjavad.

Impact:
The memory Resident Set Size (RSS) of the restjavad process will be larger than needed, possibly constricting other processes in the control plane.

Workaround:
If restjavad.useextramb is set to value true you may find that if only a small amount of extra restjavad memory was required (~192 MB or less extra) that it can be set to false.

This is because the default size of restjavad has increased by 192 MB to 384MB.

Restart restjavad after the change.

Fix:
A new sys DB variable, provision.restjavad.extramb has been introduced to allow finer-grained control of restjavad memory.

It takes effect only if sys db restjavad.useextramb is true. It can be used to set restjavad heap size both above and below the default heap size of 384 MB.

Behavior Change:
A new sys DB variable, provision.restjavad.extramb has been introduced to allow finer-grained control of restjavad memory.

The variable is particularly useful when you need restjavad to be slightly bigger and also need a much larger provision.extramb without most of that being taken by restjavad.

For the variable to take effect, sys db restjavad.useextramb must be set to 'true'; otherwise, default memory values are used.

The variable sets the heap size, and defaults to and has a minimum value of 192 MB.

If the value of provision.restjavad.extramb is set above a certain cap value, the heap size will be set to the cap value. In this release, the cap value 384 MB + 80% of provision.extramb.

So with restjavad.useextramb set to 'true', you can set the restjavad heap size from 192 MB to 384 MB + 80% of provision.extramb using the provision.restjavad.extramb variable.

After changing value of provision.restjavad.extramb, restart restjavad to enable the change in memory size:

bigstart restart restjavad

Or on multi-blade systems:

clsh bigstart restart restjavad

If using a sys db restjavad.useextramb value of true and needing to restore your previous restjavad memory setting ( based on maximum heap size) please look at advice below.

Before upgrade - if you set sys db restjavad.useextramb to value false before install of new version you will have more restjavad memory, the default 384MB, after upgrade.

  tmsh modify sys db restjavad.useextramb value false

If you restart restjavad you can see if that value works before upgrade. If you don't restart then it will come into effect after reboot.

If that no longer has issues after update then leave that setting at false. Otherwise set back to true (no restart) and increase provision.restjavad.extramb as in After upgrade section below.

After upgrade:
Set sys db provision.restjavad.extramb to an appropriate value and restart restjavad.

Run the following command:

  tmsh modify sys db provision.restjavad.extramb value X
  bigstart restart restjavad

Iterate as necessary.

The value of X is derived by using one of the following formulae:

- When updating from versions before 14.1.4 and 15.1.3, to affected versions, a value that preserves the maximum previous restjavad heap size is:
  192MB + 80% of MIN(provision.extramb|2500)
the minimum possible heap size was:
  192MB + 20% of MIN(provision.extramb|2500)
The actual restjavad heap size would be between those extremes. SSLO systems would typically need a higher amount towards the maximum.

  Example 1: If provision.restjavad was 1000 MB on previous version, the possible range of restjavad heap size would have been between (20% of 1000 + 192) = 392 MB and (80% of 1000 + 192) = 992 MB.
  Example 2: If provision.extramb was 4000 MB, the possible range would be between (20 % of 2500 + 192) = 692 MB and (80% of 2500 + 192) = 2192 MB.

- When updating from 14.1.4-14.1.5, from 15.1.3-15.1.6.1 or from 16.0.x to affected versions:
  384MB + 80% of MIN(provision.extramb|2500)

  Example 3: If provision.extramb was 500 MB, the restjavad heap size on the previous version would have been 80% of 500 + 384 = 784 MB.

- When updating from 16.1.0-16.1.3 or from 17.0.0.0 to affected versions:
  384MB + 90% of MIN(provision.extramb|4000)

  Example 4: If provision.extramb was 2000 MB, the restjavad heap size on the previous version would have been 90% of 2000 + 384 = 2184 MB.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1024841-2 : SSL connection mirroring with ocsp connection failure on standby

Links to More Info: BT1024841

Component: Local Traffic Manager

Symptoms:
SSL connection mirroring with ocsp stapling connection failure on standby, active completes handshake with delay.

Conditions:
SSL connection mirroring with ocsp stapling

Impact:
Handshake delay on active

Workaround:
Disable ocsp stapling or ssl connection mirroring

Fix:
SSL connection mirroring handshake with ocsp stapling completes normally.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1024761-1 : HTTP adds Transfer-Encoding and terminating chunk to responses that cannot have a body

Links to More Info: BT1024761

Component: Local Traffic Manager

Symptoms:
When rechunking is requested, HTTP responses with methods or status codes indicating that no body be present (like HEAD or 304) are receiving a Transfer-Encoding header and a terminating chunk. These responses should not have a body of any sort.

Conditions:
HTTP virtual server with rewrite profile present with the server that does HTTP caching.

Impact:
HTTP clients are unable to connect.

Workaround:
Remove the rewrite profile.

Possibly change http profile response-chunking from sustain to unchunk. This resolves the issue for the 304, but means that all other requests are changed from either chunking or unchunked with Content-Length header to unchunked without Content-Length and with "Connection: Close".

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5


1024661-3 : SCTP forwarding flows based on VTAG for bigproto

Links to More Info: BT1024661

Component: TMOS

Symptoms:
Sometimes SCTP traffic is unidirectionally dropped on one link after an SCTP link down occurs.

Conditions:
-- SCTP configured and BIG-IP is passing traffic
-- A link goes down

Impact:
Flow creation on the wrong TMM and some traffic is dropped.

Workaround:
Disable SCTP flow redirection.
tmm.sctp.redirect_packets == disable

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.6.1, 14.1.5.1


1024621-4 : Re-establishing BFD session might take longer than expected.

Links to More Info: BT1024621

Component: TMOS

Symptoms:
It might take a few minutes for a BFD session to come up. During this time you will notice session state transition multiple times between 'Admin Down' <-> 'Down'.

Conditions:
BFD peer trying to re-establish a session with BIG-IP, choosing ephemeral ports dis-aggregating to different TMMs.

Impact:
It might take a few minutes for a BFD session to come up.

Workaround:
Increasing Tx/Rx timers will minimize a chance of hitting the problem (For example 1000 TX/RX)

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1024437-6 : Urldb index building fails to open index temp file

Links to More Info: BT1024437

Component: Access Policy Manager

Symptoms:
The following error message shows up in /var/log/urldbmgr-trace.log:

THREAD: 2CDD4700; ERROR; WsFileOpen: Could not open file /var/urldb/staging/current/host.6417.byte.dat.003
THREAD: 2CDD4700; ERROR; WsIndexBuilderOpenFile: Failed to open index file /var/urldb/staging/current/host.6417.byte.dat.003.
THREAD: 2CDD4700; ERROR; WsHostIndexV7OpenFile: Failed to open Host index file /var/urldb/staging/current/host.6417.byte.dat.003.
THREAD: 2CDD4700; ERROR; WsHostIndexV7BuildProcessTempFiles: Failed to open host index temp file

As a result of this error, some requested URL category lookups return "Uncategorized".

Conditions:
The error can happen during index building after a new primary URLDB is downloaded.

Impact:
Some websites are categorized as "Uncategorized"

Workaround:
1) Stop urldbmgrd:
    bigstart stop urldb urldbmgrd

2) Delete databases:
    rm -rf /var/urldb/master/
    rm -rf /var/urldb/rtu/

3) Start urldbmgrd:
    bigstart start urldb urldbmgrd
 
4) Force database download:
   - tmsh command: "modify sys url-db download-schedule urldb download-now true", or
   - Admin GUI: Access >> Secure Web Gateway >> Database Settings >> Database Download >> Download Now
 
Databases will re-download and index.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.3.1


1024225-3 : BIG-IP sends "Transfer-Encoding: chunked" to http/2 client after HEAD request

Links to More Info: BT1024225

Component: Local Traffic Manager

Symptoms:
BIG-IP proxying http2 -> http1.1. In response to a HEAD request, pool member sends response with "Transfer-Encoding: chunked" header without chunked payload. BIG-IP sends "Transfer-Encoding: chunked" header back to http2 client which generates RST_STREAM, PROTOCOL_ERROR. According to RFC 7450 a proxy SHOULD remove such headers.

Conditions:
1) H2 <-> H1 is configured on virtual server
2) HEAD request over http2->http1.1 gateway getting chunked response.

Impact:
Http2 connection is reset

Workaround:
iRule to remove "Transfer-Encoding: Chunked" header from response.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1024101-1 : SWG as a Service license improvements

Links to More Info: BT1024101

Component: Access Policy Manager

Symptoms:
SWG sessions maxed out and the SWG license is not released until the APM session is ended.

Conditions:
SWG and APM are in use.

Impact:
SWG sessions are tied to APM sessions and can reach the limit and not be recycled even if the APM session is not actively using SWG.

Workaround:
None

Fix:
Fixed an issue with SWG session tracking.

Fixed Versions:
17.0.0, 16.1.3, 16.1.1


1024029-2 : TMM may crash when processing traffic with per-session APM Access Policy

Links to More Info: K58235223, BT1024029


1023993-4 : Brute Force is not blocking requests, even when auth failure happens multiple times

Links to More Info: BT1023993

Component: Application Security Manager

Symptoms:
Send traffic with multiple Authorization headers in the request after configuring the brute force. The traffic will not be blocked, when it is supposed to be.

Conditions:
When there is more than one Authorization header present in the requests.

Impact:
Brute force is possible with specially crafted requests having multiple Authorization headers and will be able to bypass brute force checks.

Workaround:
Enable "Illegal repeated header violation" and configure Authorization header repeated occurrence to disallow.

Fix:
ASM detects the brute force attempt with multiple Authorization headers in the request.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1023721 : iapp_restricted_key not available on fresh installation and overwrites the peer device's master key during config sync

Links to More Info: BT1023721

Component: iApp Technology

Symptoms:
Config sync of a deployment fails for SSL Orchestrator or Application Guided Config applications.

There is an error in /var/log/restjavad.0.log:

java.lang.Exception: Failed to find key com.f5.rest.common.RestRequestSender$HttpException: java.net.ProtocolException: status:404, body:{"code":404,"message":"Object not found - /Common/iappKey","errorStack":[],...

Conditions:
-- Recently formed device service cluster
-- Deploying SSL Orchestrator or AGC and triggering a config sync for the first time

Impact:
Secure Storage will not secure restricted_properties with the correct master key which will raise issues with encryption/decryption of data.

Workaround:
None

Fix:
iapp_restricted_key object should be synced properly during config sync

Fixed Versions:
17.0.0, 16.1.3


1023437-1 : Buffer overflow during attack with large HTTP Headers

Component: Anomaly Detection Services

Symptoms:
When the HTTP Headers are larger than 1024 characters and one of the anomalous textual headers is located after 1024, a buffer overflow might occur.

Conditions:
HTTP or TLS Signature protection is activated and during attack anomalous request arrives.

Impact:
Most of the time results in bad characters in the signature name, more rarely results in Memory Access Violation which could be exploited as buffer overflow attack.

Fix:
Enforce HTTP metadata size limit to be within the first 1024 characters of the HTTP Headers payload.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


1023365-2 : SSL server response could be dropped on immediate client shutdown.

Links to More Info: BT1023365

Component: Local Traffic Manager

Symptoms:
SSL server response might be dropped if peer shutdown arrives before the server response.

Conditions:
-- the virtual server is using a Server SSL profile
-- the client sends FIN/ACK before the server responds

Impact:
The response from the pool member may be dropped.

Workaround:
N/A.

Fix:
Serverssl response now received after peer shutdown

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1


1023341-1 : HSM hardening

Component: Local Traffic Manager

Symptoms:
Under certain conditions, HSM interactions do not follow current best practices.

Conditions:
- HSM in use

Impact:
Certain HSM interactions do not follow current best practices.

Workaround:
N/A

Fix:
HSM interactions now follow current best practices.

Fixed Versions:
17.0.0, 16.1.1, 15.1.5.1, 14.1.4.6, 13.1.5


1022757-2 : Tmm core due to corrupt list of ike-sa instances for a connection

Links to More Info: BT1022757

Component: TMOS

Symptoms:
Tmm generates a core when a corrupt list of ike-sa instances is processed.

Conditions:
Deletion of an expired ike-sa.

Impact:
Restart of tmm and re-negotiation of IPsec tunnels. Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
The internal list data structure has been reorganized to use fewer entities in less-complex relationships. This makes it less likely for a corrupted list to occur, so this issue is less likely to occur.

Fixed Versions:
17.0.0, 16.1.2


1022637-1 : A partition other than /Common may fail to save the configuration to disk

Links to More Info: BT1022637

Component: TMOS

Symptoms:
A mismatch between the running-configuration (i.e. what is returned by "tmsh list ...") and the saved-configuration (i.e. what is stored in the flat configuration files) for a partition other than /Common, despite a "tmsh save config" operation was just performed (either by the user or as a result of a config-sync).

Conditions:
- One or more partitions other than /Common exist on the system.

- One or more of said partitions have no more configuration objects defined in them (i.e. are empty).

- A config save operation similar to "tmsh save sys config partitions { Common part1 [...] }" occurs, either manually initiated by an Administrator or as a result of a config-sync operation (in which case the device-group must be configured for manual synchronization).

Impact:
Should a BIG-IP Administrator notice the mismatch, the only immediate impact is confusion as to why the config save operation was not effective.

However, as the flat config files are now out-of-date, performing a config load operation on a unit in this state will resurrect old configuration objects that had been previously deleted.

On an Active unit, this may affect traffic handling. On a redundant pair, there is the risk that the resurrected objects may make it to the Active unit after a future config-sync operation.

Workaround:
If you notice the mismatch, you can resolve it by performing a config save operation for all partitions (i.e. "tmsh save sys config").

Fix:
Non /Common partitions now get saved to disk as intended.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5, 14.1.4.6, 13.1.5


1022625-2 : Profile type 'swg-transparent' should be selected on create page when 'create-new' is selected for SwgAsService in SSL Orchestrator

Links to More Info: BT1022625

Component: Access Policy Manager

Symptoms:
When creating a new service, certain default access profiles are not automatically selected.

Conditions:
1. SSL Orchestrator + APM + SWG provisioned
2. Select 'create-new' for access profile drop-down when adding a SwgAsService in SSL Orchestrator

A new tab opens with the profile creation page, but the access profile type drop-down does not have any type selected.

Impact:
When adding a SwgAsService in SSL Orchestrator, the only supported access profile type is SWG-Transparent, hence it should be automatically selected.

Workaround:
None

Fix:
Fixed an issue with automatic profile selection.

Fixed Versions:
17.0.0, 16.1.1


1022493-4 : Slow file descriptor leak in urldbmgrd (sockets open over time)

Links to More Info: BT1022493

Component: Access Policy Manager

Symptoms:
Unix domain sockets are opened and never closed in urldbmgrd. This is a very slow leak over time.

Conditions:
SWG or URLDB is provisioned.

Impact:
Urldbmgrd may hit a limit of open file descriptors, and may eventually core and restart. When urldbmgrd restarts, urldb also restarts. This may result in a momentary instant where URL categorization is not available.

Workaround:
Restarting urldbmgrd will clear the open file descriptors. Performing a forced restart during a time of no traffic will mitigate the risk of urldbmgrd restarting at an inconvenient time if there are too many sockets open.

"bigstart restart urldbmgrd" will restart the daemon.

Fixed Versions:
17.0.0, 16.1.3.1


1022453-4 : IPv6 fragments are dropped when packet filtering is enabled.

Links to More Info: BT1022453

Component: Local Traffic Manager

Symptoms:
IPv6 fragments are dropped when packet filtering is enabled.

Conditions:
Packet filtering is enabled and the system is processing IPv6 fragments.

Impact:
Some or all of the fragments of an IPv6 packet are lost.

Workaround:
Disable packet filtering

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1022417-1 : Ike stops with error ikev2_send_request: [WINDOW] full window

Links to More Info: BT1022417

Component: TMOS

Symptoms:
IKE SAs will be lost.

Conditions:
A failover occurs while IKE is sending DPD to the peer, and the reply is received by the newly active BIG-IP.

Multiple failovers can increase the likelihood that this occurs.

Impact:
IKE SAs may be deleted and there will be traffic loss.

Workaround:
Increase in DPD interval to reduce the probability of occurrence of the issue.

Fix:
Fixed an issue where IKE SAs were being lost during failover events.

Fixed Versions:
17.0.0, 16.1.2


1022269-1 : False positive RFC compliant violation

Links to More Info: BT1022269

Component: Application Security Manager

Symptoms:
False positive RFC compliant violation.

Conditions:
Authorization header with specific types.

Impact:
False positive violations.

Workaround:
Turn on an internal parameter:
 
/usr/share/ts/bin/add_del_internal add ignore_authorization_header_decode_failure 1

Fix:
Added tolerance to the authorization headers parser.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4, 14.1.4.4, 13.1.5


1021773-1 : Mcpd core.

Links to More Info: BT1021773

Component: TMOS

Symptoms:
Mcpd crashes and leaves a core file.

Conditions:
This issue can occur if BIG-IP fails to allocate huge pages, which can occur during module provisioning.

Impact:
Mcpd crashes and the system goes into an inoperative state.

Workaround:
N/A

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2, 15.1.7


1021713-1 : TMM may crash when processing AFM NAT64 policy

Links to More Info: K00721320, BT1021713


1021637-4 : In some cases BD enforces CSRF on all URLs, ignoring CSRF URLs

Links to More Info: BT1021637

Component: Application Security Manager

Symptoms:
CSRF is sometimes enforced on URLs that do not match the CSRF URLs list

Conditions:
ASM policy with CSRF settings

Impact:
URLs that do not match the CSRF URLs list can be blocked due to CSRF violation.

Workaround:
None

Fix:
N/A

Fixed Versions:
16.1.2.2, 15.1.6.1


1021521-1 : JSON Schema is not enforced if OpenAPI media-type is wild card.

Links to More Info: BT1021521

Component: Application Security Manager

Symptoms:
If the openAPI configuration contains a wildcard media type for an endpoint, ASM does not enforce the JSON schema for requests with a JSON payload.

Conditions:
Create an OpenAPI policy with media type set to wildcard.

Impact:
ASM doesn't enforce JSON schema validation for HTTP requests containing a JSON payload.

Workaround:
N/A

Fix:
Provided fix and verified

Fixed Versions:
17.0.0, 16.1.2.2


1021485-3 : VDI desktops and apps freeze with Vmware and Citrix intermittently

Links to More Info: BT1021485

Component: Access Policy Manager

Symptoms:
VMware VDI:
Blank screen is seen while opening remote desktop when VDI is configured with VMware.

Citrix:
Desktop freezes immediately after opening remote desktop when VDI is configured with Citrix.

Conditions:
VMware VDI:
-- VDI is configured with VMware
-- Desktop or App is launched using native client from Webtop.
wait till 2X inactivity timeout if inactivity timeout

Citrix:
-- VDI is configured with Citrix
-- Desktop or App is launched using native client from Webtop.
-- Configure Inactivity timeout to 0.

Impact:
VDI desktops freeze while opening or immediately after opening.
The following error is seen in APM logs:
"Session stats update failed: ERR_NOT_FOUND"

Workaround:
No

Fix:
Users should not experience any intermittent desktop freeze.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1021481-1 : 'http-tunnel' and 'socks-tunnel' (which are internal interfaces) should be hidden.

Links to More Info: BT1021481

Component: Local Traffic Manager

Symptoms:
The Linux command 'ifconfig' or 'ip a' shows two devices 'http-tunnel' and 'socks-tunnel' that are for TMM internal use only.

Conditions:
These interfaces show up regardless of the BIG-IP configuration.

Impact:
As long as these devices are not used there is no impact aside from possibly causing confusion. Any attempt to use those devices from a host process fails or produces unpredictable results. These devices should not be exposed on the Linux host.

Workaround:
N/A

Fix:
The devices 'http-tunnel' and 'sock-tunnel' no longer show up on the Linux host.

Fixed Versions:
17.0.0, 16.1.2


1021417-1 : Modifying GTM pool members with replace-all-with results in pool members with order 0

Links to More Info: BT1021417

Component: Global Traffic Manager (DNS)

Symptoms:
GTMpool has multiple members with order 0.

Conditions:
There is an overlap for the pool members for the command replace-all-with and the pool members to be replaced.

Impact:
Multiple pool members have the same order.

Workaround:
Perform this procedure:
1. Delete all pool members from the GTM pool.
2. Use replace-all-with.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1021061-4 : Config fails to load for large config on platform with Platform FIPS license enabled

Links to More Info: BT1021061

Component: Global Traffic Manager (DNS)

Symptoms:
Config fails to load.

Conditions:
-- Platforms with Platform FIPS license enabled.
-- There are several ways to encounter this. One is with a large GTM (DNS) configuration that requires extending the gtmd stats file.

Impact:
Config file fails to load. For the gtmd configuration, gtmd repeatedly logs error messages similar to:

err gtmd[14954]: 011af002:3: TMSTAT error 'Invalid argument' creating row '/Common/vs_45_53' in table 'gtm_vs_stat'

For merged daemon, reports messages similar to:
err merged[9166]: 011b0900:3: TMSTAT error tmstat_row_create: Invalid argument.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


1020957-1 : HTTP response may be truncated by the BIG-IP system

Links to More Info: BT1020957

Component: Local Traffic Manager

Symptoms:
Web pages are not rendered properly; HTTP responses are truncated when traversing the BIG-IP system.

Conditions:
-- Virtual server with an HTTP profile
-- HTTP server generates a compressed response
-- BIG-IP system determines that it must decompress the payload, e.g., a rewrite profile attached to the virtual server

Impact:
HTTP responses are truncated when passing through the BIG-IP system.

Workaround:
One of the following:

-- Add an HTTP Compression profile to the virtual server, and ensure that 'Keep Accept-Encoding' is not selected.
-- Use an iRule to remove the Accept-Encoding header from requests, e.g.:

ltm rule workaround {
    when HTTP_REQUEST {
        HTTP::header remove Accept-Encoding
    }
}

Fixed Versions:
17.0.0, 16.1.2


1020789-4 : Cannot deploy a four-core vCMP guest if the remaining cores are in use.

Links to More Info: BT1020789

Component: TMOS

Symptoms:
When trying to deploy a vCMP guest on an i11800 vCMP host using four or more cores while all of the other cores are in use, the following error message may be seen:

err mcpd[<pid>]: 0107131f:3: Could not allocate vCMP guest (<guest_name>) because fragmented resources

--------------------------------------------------
one more similar issue has raised for 8 guests allocation failure

When trying to deploy a eight core guest on an i11800 vCMP host where four 2 cores are in use, the following error message may be seen:

0107131f:3: Could not allocate vCMP guest (guest-8cores-A) because fragmented resources

Conditions:
-- VCMP provisioned and all or most cores are in use.
-- Attempt to deploy a guest.

This is more likely to occur with vCMP guests that use four or more cores.

Impact:
All of the available cores cannot be used.

Workaround:
You may be able to work around this by deploying the largest guests first, then any remaining 2-core guests.

There is currently no other fix.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.6, 13.1.5


1020717-4 : Policy versions cleanup process sometimes removes newer versions

Links to More Info: BT1020717

Component: Application Security Manager

Symptoms:
The policy versions cleanup process sometimes removes versions in incorrect order. Newer versions are removed while older versions are preserved.

Conditions:
"maxSizeOfSavedVersions" configuration parameter in "/etc/ts/tools/policy_history.cfg" has very low value.

Impact:
Newer versions are removed.

Workaround:
increase value of "maxSizeOfSavedVersions" configuration parameter in "/etc/ts/tools/policy_history.cfg"

Fixed Versions:
16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1020705-2 : tmsh show analytics dos-l3 report view-by attack-id" shows "allowed-requests-per-second" instead "attack_type_name

Links to More Info: BT1020705

Component: Application Visibility and Reporting

Symptoms:
Output of "tmsh show analytics dos-l3 report view-by attack-id" command has changed from version 13.x to 15.x. "Attack type" was removed from the system, so it was automatically replaced by the first metric "allowed-requests-per-second". For DOS L3 "Attack type" was replaced by "Vector Name" but it currently is not shown in the report along wit "Attack ID"

Conditions:
AFM is provisioned

Impact:
This change might cause scripts to fail if they use the name of the field.

Workaround:
1) edit /etc/avr/monpd/monp_dosl3_entities.cfg file. Change [dosl3_attack_id] section the following way: add 'vector_name' to measures list and add an additional parameter 'default_measure' as specified below :

[dosl3_attack_id]
...
measures=allowed_requests_per_sec,count,drop_per_sec,drop_count,total_per_sec,total_count,attacks_count,attack_type_name,category_name,vip_name,period,vector_name
default_measure=vector_name
...

2) edit /etc/avr/monpd/monp_dosl3_measures.cfg file. Add in the end the following section:

[vector_name]
id=vector_crc
formula=IF(count(distinct FACT.vector_crc)>1,'Aggregated',attack_vector_str)
merge_formula=IF(count(distinct vector_name)>1,'Aggregated',vector_name)
dim=AVR_DIM_DOS_VIS_ATTACKS_VECTOR
dim_id=attack_vector_crc
tmsh_display_name=vector-name
display_name=Vector
comulative=false
priority=65

3) restart the BIG-IP system: bigstart restart

After the system is up you can apply the same tmsh command: "tmsh show analytics dos-l3 report view-by attack-id"
You will get a result similar to 13.x. Note that "attack_type_name" is replaced by "vector-name"

Fix:
Workaround applied as fix.

Fixed Versions:
17.0.0, 16.1.2, 15.1.3.1, 14.1.4.4


1020645 : When HTTP CONNECT is sent, iRule event HTTP_RESPONSE_RELEASE is not triggered

Links to More Info: BT1020645

Component: Local Traffic Manager

Symptoms:
In an explicit proxy configuration when an HTTP request is sent to an HTTPS destination server via proxy, the HTTP CONNECT method is sent, but the iRule event HTTP_RESPONSE_RELEASE is not fired.

Conditions:
- Simple HTTP explicit proxy virtual server
- An HTTP request from the client is sent to an 'https://' destination server

Impact:
iRule event HTTP_RESPONSE_RELEASE does not get triggered.

Workaround:
None

Fix:
When HTTP CONNECT is sent, the iRule event HTTP_RESPONSE_RELEASE is now triggered.

Fixed Versions:
16.1.3.1, 15.1.4.1


1020549-1 : Server-side connections stall with zero window with OneConnect profile

Links to More Info: BT1020549

Component: Local Traffic Manager

Symptoms:
Serverside connections from pool member to BIG-IP hang, with the BIG-IP advertising a TCP zero window.

Conditions:
-- Virtual server with OneConnect profile
-- The BIG-IP applies flow-control to the serverside connection (e.g. the server's response to the BIG-IP is faster than the BIG-IP's forwarding the response to the client)
-- The serverside connection is subsequently re-used

Impact:
Serverside connections hang in the middle of data transfer, and will eventually time out.

Workaround:
If possible, remove the OneConnect profile from the virtual server.

Note: removing a OneConnect profile may cause problems with persistence, as described in
K7964: The BIG-IP system may appear to ignore persistence information for Keep-Alive connections (https://support.f5.com/csp/article/K7964)

Fixed Versions:
17.0.0, 16.1.2.2


1020377-1 : Missing IKEv2 listeners can send IKE packets to the IKEv1 racoon daemon

Links to More Info: BT1020377

Component: TMOS

Symptoms:
If an IKEv2 tunnel terminates with an error condition, afterward it is possible for IKE packets to be received by the IKEv1 racoon daemon, which is listening to local host (i.e 127.0.0.1) on ports 500 and 4500.

Conditions:
To get the problem to occur, you may need these details:

-- an IKEv2 config where traffic selector narrowing happens
-- termination of an IKEv2 tunnel with an error condition
-- some other BIG-IP service using the same local self IP

Packets can reach the IKEv1 racoon daemon only when some BIG-IP service uses bigself as the proxy, which forwards packets to localhost (127.0.0.1) with the same port number. So even if no IKEv1 config is present for a local self IP, if some other BIG-IP service also uses bigself as a proxy, this can forward IKE packets to localhost as well.

Impact:
The IKEv2 tunnel does not get renegotiated, because IKE packets reach the IKEv1 daemon, which ignores them, because the proper listener to handle IKEv2 is missing. As a result, tunnel service is interrupted.

Workaround:
Deleting and re-adding the problematic ike-peer and traffic-selector should bring back IPsec support for that tunnel.

If the initiating and responding sides of the tunnel have identical traffic-selector proposals, then narrowing should not happen, and this would also prevent the problem in the first place.

Fix:
BIG-IP systems now manage and handle multiple references to the same listener in a more rigorous way, so the IKEv2 listener cannot go away while it is still needed.

Fixed Versions:
17.0.0, 16.1.2


1020337-2 : DNS msg_ObjType can cause buffer overrun due to lack of NUL terminator

Links to More Info: BT1020337

Component: Global Traffic Manager (DNS)

Symptoms:
Tmm cores with umem debug enabled.

Conditions:
A string operation is performed against DNS resource records (RRs) from DNSMSG::section in an iRule.

Impact:
Tmm memory corruption. In some situations, tmm might crash. Traffic disrupted while tmm restarts.

Workaround:
Do not use string operations against DNS RRs returned from DNSMSG::section.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1019853-1 : Some signatures are not matched under specific conditions

Links to More Info: K30911244, BT1019853

Component: Application Security Manager

Symptoms:
Some signatures are not matched, attacking traffic may pass through.

Conditions:
- Undisclosed signature conditions

Impact:
Attacking traffic can bypass the WAF.

Workaround:
N/A

Fix:
Signatures are now matched as expected.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1019829-2 : Configsync.copyonswitch variable is not functioning on reboot

Links to More Info: BT1019829

Component: TMOS

Symptoms:
Configsync.copyonswitch variable is not functioning properly during reboot to another partition

Conditions:
-- db variable configsync.copyonswitch modified
-- hostname is changed in global-settings
-- reboot to another partition

Impact:
The hostname will be changed back to the default hostname after reboot

Fixed Versions:
16.1.1


1019721-1 : Wrong representation of JSON/XML validation files in template based (minimal) JSON policy export

Links to More Info: BT1019721

Component: Application Security Manager

Symptoms:
When exporting template-based (minimal) JSON policy with profiles and associated validation files, the resulting configuration is wrong.
 - Configuration for the JSON validation file is missing from the exported policy
 - The JSON profile associated validation file has the name but no content

Conditions:
Export a minimal JSON policy with JSON/XML validation files associated to the JSON/XML profile.

Impact:
Error due to wrong configuration of the validation file during import.

Fixed Versions:
17.0.0, 16.1.2.2


1019613-5 : Unknown subscriber in PBA deployment may cause CPU spike

Links to More Info: BT1019613

Component: Carrier-Grade NAT

Symptoms:
in PBA deployment, a CPU spike may be observed if the subscriber-id log is enabled and the subscriber-id is unknown.

Conditions:
-- PBA configuration
-- Address translation persistent is enabled
-- Subscriber-id log is enabled
-- There is an unknown subscriber

Impact:
Overall system capacity reduces.

Workaround:
Disable subscriber-id logging.

Fix:
Unknown subscriber in PBA deployment no longer causes a CPU spike.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1019609-1 : No Error logging when BIG-IP device's IP address is not added in client list on netHSM.

Links to More Info: BT1019609

Component: Local Traffic Manager

Symptoms:
"Ensure BIG-IP's IP address is added to the client list"
error log is not displayed, despite the BIG-IP not being added to the client list in Thales/nShield/Entrust HSM.

Conditions:
BIG-IP is not added to the client list in Thales/nShield/Entrust HSM.

Impact:
Difficult to debug the error condition to due lack of error message

Workaround:
None

Fix:
Grep error text information on stderror stream now works.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1


1019357-2 : Active fails to resend ipsec ikev2_message_id_sync if no response received

Links to More Info: BT1019357

Component: TMOS

Symptoms:
In high availability (HA) setup, after failover, the newly active BIG-IP device, will send ikev2_message_id_sync messages to the other device.

If the BIG-IP device did not receive a response, it has to retransmit the packet. Some of the IKE tunnels are trying to retransmitting the packet, but its not going out of BIG-IP due to wrong state of relation between IKE tunnel and connection flow.

After 5 retries, it marks the peer as down, and the IKE tunnel is deleted.

Conditions:
-- High availability (HA) environment
-- IKE tunnels configured
-- A failover occurs

Impact:
Traffic loss.

Workaround:
None

Fix:
Fetch latest connection flow during retransmission of IKE/IPSEC packet.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1018613-1 : Modify wideip pools with replace-all-with results pools with same order 0

Links to More Info: BT1018613

Component: Global Traffic Manager (DNS)

Symptoms:
Multiple wideip pools have the order 0.

Conditions:
There are overlap for the pools for command replace-all-with and the pools to be replaced.

Impact:
iQuery flapping between GTMs.

Workaround:
First delete all pools from the wideip and then use replace-all-with.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1018577-4 : SASP monitor does not mark pool member with same IP Address but different Port from another pool member

Links to More Info: BT1018577

Component: Local Traffic Manager

Symptoms:
When the LTM SASP monitor is applied to a pool with multiple members having the same IP Address but different Ports, only one of the pool members with the duplicated IP Address will be monitored (marked UP or DOWN as appropriate). Other pool members sharing the same IP Address will remain in a 'checking' state.

Conditions:
This occurs when using the SASP monitor in a pool with multiple members having the same IP Address but different Ports.
For example:
ltm pool sasp_test_pool {
    members {
        sasp_1:80 {
            address 10.10.10.1
        }
        sasp_1:8080 {
            address 10.10.10.1
        }
        sasp_2:80 {
            address 10.10.10.2
        }
        sasp_2:8080 {
            address 10.10.10.2
        }
    }
    monitor sasp_test
}

In this case, only one pool member with a given IP Address will be correctly monitored by the sasp monitor.
Any additional pool members with the same IP Address but different port will not be monitored by the SASP monitor and will remain in a 'checking' state.

Impact:
Not all pool members may be effectively/accurately monitored by the SASP monitor.

Fix:
The ltm sasp monitor correctly monitors members of a pool which share the same IP Address but different Ports.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1018493-1 : Response code 304 from TMM Cache always closes TCP connection.

Links to More Info: BT1018493

Component: Local Traffic Manager

Symptoms:
When a virtual server is configured to accelerate HTTP traffic, it caches responses with 200 and 304 response codes. Serving a response with "304 Not Modified" code, TMM may close a connection to a client.

Conditions:
-- A virtual server has a web-acceleration profile (without a web application for versions prior 16.0.0).
-- A response with code 304, stored in TMM cache, is served to a request.

Impact:
A client needs to open a new TCP connection every time when a response with "304 Not Modified" code is served.

Fix:
TMM correctly serves a response with "304 Not Modified" code, allowing to correctly handle TCP connection status.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4, 14.1.4.5, 13.1.5


1018309-5 : Loading config file with imish removes the last character

Links to More Info: BT1018309

Component: TMOS

Symptoms:
While loading a configuration from the file with IMISH ('imish -f <f_name>'),truncating the last line.

printf 'log file /var/log/zebos.log1' >/shared/tmp/new.cfg
Running imish -r 0 -f /shared/tmp/new.cfg have the last character missing like below:
log file /var/log/zebos.log

Conditions:
Loading a config with 'imish -f <f_name>' commands.

Note: This command is used with the bigip_imish_config Ansible module.

Impact:
Configuration commands cannot be created properly.

Workaround:
For CLI, use extra control char at the end or \n.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4.1


1018285-2 : MRF DIAMETER to select automatic removal of a persistence entry on completion of a transaction

Links to More Info: BT1018285

Component: Service Provider

Symptoms:
MRF DIAMETER is not DIAMETER-application aware. It does not have application-specific business logic. When creating a DIAMETER solution, BIG-IP operators often need to write iRule scripts that remove a session persistence entry at the end of a transaction.

Conditions:
Some applications require removal of the persistence entry upon successful and unsuccessful completion of a transaction.

root@(bigip1)(cfg-sync Standalone)(Active)(/Common)(tmos)# list ltm rule log_dia_error
ltm rule log_dia_error {
when DIAMETER_INGRESS {
set cmd_code [DIAMETER::command]
if { $cmd_code == 272 } {
    set cc_req_type [DIAMETER::avp data get 416 integer32]
    if {[DIAMETER::is_response] && $cc_req_type == 3 } {
       log local0. "Persistence record delete-on-any"
       DIAMETER::persist delete-on-any
    }
 }
}

Impact:
iRule script is required.

Fix:
DIAMETER::persist irule are supported to remove a persistence entry based on the result status of a answer message.
below irule commands are supported.
DIAMETER::persist delete-on-any
DIAMETER::persist delete-on-success
DIAMETER::persist delete-on-failure
DIAMETER::persist delete-none

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1


1018145 : Firewall Manager user role is not allowed to configure/view protocol inspection profiles

Links to More Info: BT1018145

Component: Protocol Inspection

Symptoms:
A user account with the "firewall-manager" role that is assigned permissions only to custom partitions will not be able to configure protocol inspection profiles.

Conditions:
-- A user account is created with the role firewall-manager.
-- A custom partition is created.
-- The newly created user is given access to the newly created partition.

Impact:
Any user account without access to "/Common" partition is not allowed to configure protocol inspection profiles.

Workaround:
- If the user account is provided access to "/Common" partition as well, the user should be able to configure protocol-inspection profiles in the newly created custom partitions.

Fix:
The permissions are granted for any non-admin user to configure protocol inspection profiles in a custom partition as long as they have access to "/Common" partition as well.

Fixed Versions:
16.1.1, 15.1.4


1017721-5 : WebSocket does not close cleanly when SSL enabled.

Links to More Info: BT1017721

Component: Local Traffic Manager

Symptoms:
After sending a close frame to the WebSocket server, the WebSocket client receives 1006 response.

Conditions:
Virtual server with the following profiles:
-- WebSocket
-- HTTP over SSL (at least server side SSL)

and connection closure is initiated by the client.

Impact:
Client side applications experience errors in the form of WebSocket abnormally closing connections with error code 1006.

Workaround:
Avoid using SSL on WebSocket server context.

Fix:
WebSocket connections close without any error.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5.1


1017533-3 : Using TMC might cause virtual server vlans-enabled configuration to be ignored

Links to More Info: BT1017533

Component: Local Traffic Manager

Symptoms:
When switching between traffic-matching-criteria (TMC) and regular virtual-server configuration, the vlans-enabled option might be ignored, causing unexpected traffic handling.

Conditions:
Changing virtual-server configuration when using traffic-matching-criteria.

Impact:
Unexpected traffic handling and disruption

Workaround:
Avoid using TMC (port lists and address lists). When in a 'faulty' state you can try changing vlan-enabled on and changing it back on the virtual server, you might need to clear existing connections afterwards.

Follow below articles.

K53851362: Displaying and deleting BIG-IP connection table entries from the command line

K52091701: Handling Connections that have been matched to the wrong Virtual Server.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.6


1017513-5 : Config sync fails with error Invalid monitor rule instance identifier or monitors are in a bad state such as checking

Links to More Info: BT1017513

Component: Local Traffic Manager

Symptoms:
If you remove or attach a different monitor to an fqdn pool, then perform a full config-sync, an error occurs:

Load failed from /Common/bigip1 01070712:3: Caught configuration exception (0), Invalid monitor rule instance identifier: 58.

This error can occur on FQDN nodes or regular nodes. It's the use of fqdn nodes that allows this issue to occur.

Conditions:
-- BIG-IP device is configured with fqdn nodes/pools with monitors.
-- Modify an fqdn pool to remove or attach a different monitor.
-- Run the command:
 run cm config-sync to-group Failover
-- Perform a full config-sync.

Impact:
You might experience the following:
-- Sync to the peer devices fails.

-- Monitors may be stuck in an unexpected state such as down (even with a good reply) or checking even though an up or down response is received.

Workaround:
Use incremental-sync.

If incremental sync fails to correct the issue it can sometimes be recovered by running the following command:

 bigstart restart mcpd

Note: Traffic disrupted while the system restarts.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5.1, 14.1.4.5, 13.1.5


1017233-2 : APM uses wrong session key when iRule for ActiveSync is used resulting in passwords corruption

Links to More Info: BT1017233

Component: Access Policy Manager

Symptoms:
A corrupted password is sent as part of the "Authorization" header to the backend device and as a result, http 404 is returned

Conditions:
-- iRule for ActiveSync is used
-- The BIG-IP system has multiple tmms running

Impact:
User Authentication is failed by the backed server

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1


1017153-4 : Asmlogd suddenly deletes all request log protobuf files and records from the database.

Links to More Info: BT1017153

Component: Application Security Manager

Symptoms:
Asmlogd suddenly deletes all request log protobuf files and records from the database.

Additionally, after the deletion happens, newly generated event logs seen in database do not show up in TMUI.

Conditions:
-- ASM provisioned
-- Config-sync setup, with frequent sync recovery and/or with a manual-sync device-group with ASM sync enabled.

Impact:
Sudden loss of request logs.

Workaround:
Delete all empty partitions and restart asmlogd.

1) View all the partitions:

   # perl -MF5::Db::Partition -MData::Dumper -MF5::DbUtils -e 'print Dumper(F5::Db::Partition::retrieve_partitions_info(dbh => F5::DbUtils::get_dbh(), table_name => "PRX.REQUEST_LOG"))'

Take note of the 'PARTITION_NAME' and 'TABLE_ROWS' for each partition.

2) For every partition_X (in PARTITION_NAME) with '0' in TABLE_ROWS, delete it by:

   # perl -MF5::Db::Partition -MF5::DbUtils -e 'F5::Db::Partition::delete_partition(dbh => F5::DbUtils::get_dbh(), table_name => "PRX.REQUEST_LOG", partition_name => "partition_X")'

3) restart asmlogd if and after done all deletes:

   # pkill -f asmlogd

NOTE: this workaround is temporary. Meaning, that the number of empty partitions will again accumulate and the same issue will happen again. The MAX number of partitions is - 100. Thus, it is advised to monitor the total number of *empty* partitions and repeat the workaround periodically. A cron script should work well. Normally, empty partitions should NOT accumulate. Thus, it is safe to run this script once an hour and remove all empty partitions.


Optionally, if you are having TMUI issue with newly generated event logs, perform the additional command below to delete rows from PRX.REQUEST_LOG_PROPERTIES for which no corresponding rows exist in PRX.REQUEST_LOG.

# mysql -t -u root -p$(perl -MPassCrypt -nle 'print PassCrypt::decrypt_password($_)' /var/db/mysqlpw) -e 'delete from PRX.REQUEST_LOG_PROPERTIES where request_log_id > (select id from PRX.REQUEST_LOG order by id desc limit 1)'

Fix:
Upgrading to a fixed software version will not delete accumulated partitions and will not clear the symptom away. The fix will prevent ASM from accumulating partitions unnecessarily in the scenarios.

If your ASM system is experiencing this and partitions are accumulated, perform the workaround to clear the symptom. Using a fixed software version, you only need to perform the workaround once. You no longer have to perform it periodically.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1016449-3 : After certain configuration tasks are performed, TMM may run with stale Self IP parameters.

Links to More Info: BT1016449

Component: Local Traffic Manager

Symptoms:
A Self IP instantiated by performing specific configuration tasks (see Conditions) does not work (e.g. the system does not respond to ARP requests for it).

On the contrary, the system continues to use (e.g. respond to ARP requests for) an old version of the Self IP specifying a different address.

Conditions:
This issue is known to occur when one of the following operations is performed:

- Restoring a UCS or SCF archive in which a Self IP with a specific name specifies a different address.

- Performing a config-sync between redundant units in which the sender changes a Self IP with a specific name to use a different address. For example:

tmsh delete net self <name>
tmsh create net self <name> address <new_address> ...
tmsh run cm config-sync to_group ...

- Performing specific tmsh CLI transactions involving Self IP modifications.

Impact:
The system does not utilise the configured Self IP address. Traffic will be impacted as a result (for example, in connections to the unit, in snat automap, etc.).

Workaround:
Restart TMM (bigstart restart tmm) on affected units.

Fix:
TMM now correctly handles supported Self IP address modifications.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1016441-4 : RFC Enforcement Hardening

Component: Local Traffic Manager

Symptoms:
When the HTTP profile RFC Enforcement Flag is enabled, certain non-RFC compliant headers are still allowed.

Conditions:
- Virtual Server with HTTP profile.
- RFC Enforcement Flag enabled.
- HTTP request with non-RFC compliant headers.

Impact:
Non-RFC compliant headers passed to server.

Workaround:
N/A

Fix:
BIG-IP will drop non-RFC compliant HTTP requests when the RFC compliance flag is ON.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1016113-1 : HTTP response-chunking 'sustain' profile option may not rechunk responses when also using a web acceleration profile.

Links to More Info: BT1016113

Component: Local Traffic Manager

Symptoms:
Configurations containing HTTP response-chunking 'sustain' and a Web Acceleration profile do not rechunk payload regardless of whether the web server responds with a chunked response.

Conditions:
-- Incoming response payload to the BIG-IP system is chunked.
-- HTTP profile is configured with response-chunking 'sustain'.
-- Web Acceleration profile also configured on the same virtual server.

Impact:
The BIG-IP response is not chunked, regardless of whether the associated web server responds with a chunked payload when the Web Acceleration is utilized.

Workaround:
For a chunked response to be delivered to the client, apply the iRule command 'HTTP::rechunk' to responses when a Web Acceleration profile is used.

Fix:
The BIG-IP response is chunked appropriately when a Web Acceleration profile is used.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4


1016049-6 : EDNS query with CSUBNET dropped by protocol inspection

Links to More Info: BT1016049

Component: Local Traffic Manager

Symptoms:
EDNS query might be dropped by protocol inspection with an error log in /var/log/ltm similar to:

info tmm[21575]: 23003139 SECURITYLOG Drop sip:192.168.0.0 sport:64869 dip:1.1.1.1 dport:53 query:test.f5.com qtype:malformed attack:malformed

Conditions:
Query containing CSUBNET option.

Impact:
Some queries might fail.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1015881-4 : TMM might crash after configuration failure

Links to More Info: BT1015881

Component: Application Security Manager

Symptoms:
TMM crashes after DoSL7 application configuration failure

Conditions:
DoSL7 configuration is changed, and the configuration change fails in TMM.

Impact:
Traffic disrupted while TMM restarts.

Workaround:
None

Fixed Versions:
16.1.3.1, 15.1.7


1015645-2 : IPSec SA's missing after reboot

Links to More Info: BT1015645

Component: TMOS

Symptoms:
Some IPSec SA's created after Tunnel migration may be missing after a reboot.

Conditions:
- IPSec tunnels
- Load balancing continues through tunnel migration
- The active BIG-IP system is rebooted

Impact:
Some IPSec SA's may be missing after the reboot

Workaround:
None

Fix:
During reboot, Load balancing information is loaded based on creation time instead of arrival time.

Fixed Versions:
17.0.0, 16.1.2


1015133-5 : Tail loss can cause TCP TLP to retransmit slowly.

Links to More Info: BT1015133

Component: Local Traffic Manager

Symptoms:
If a long tail loss occurs during transmission, TCP might be slow to recover.

Conditions:
-- A virtual server is configured with the TCP profile attached.
-- SACK and TLP are enabled.
-- A tail loss of multiple packets sent by the BIG-IP occurs.

Impact:
BIG-IP retransmits one packet per RTT, causing a long recovery. The impact is more pronounced if an entire window is lost.

Workaround:
Disabling TLP may improve performance in this particular case, but may degrade performance in other situations.

Fix:
A new sys db key was added: tm.tcpaggressivepartialack (disabled by default). When enabled, more data is retransmitted every RTT, similar to slow-start.

Behavior Change:
A new sys db key was added: tm.tcpaggressivepartialack (disabled by default). When enabled, more data is retransmitted every RTT, similar to slow-start.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5, 13.1.5


1014973-5 : ASM changed cookie value.

Links to More Info: BT1014973

Component: Application Security Manager

Symptoms:
ASM changes the value of a cookie going to the server.

Conditions:
Specific conditions.

Impact:
Domain cookie will reach the server with a wrong value. Can cause different malfunctions depending on the application.

Workaround:
Change the following db variable:
tmsh modify sys db asm.strip_asm_cookies (https://support.f5.com/csp/article/K30023210) value false.

There is no need to restart asm.

Add an iRule without the use of strip_asm_cookies:
https://support.f5.com/csp/article/K13693.

Fix:
Original cookies not being deleted/modified after the removing of TS cookies in ASM.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7


1014573-1 : Several large arrays/objects in JSON payload may core the enforcer

Links to More Info: BT1014573

Component: Application Security Manager

Symptoms:
Requests with JSON payload that consists of more than one object with elements, such as a couple of large arrays, may cause the enforcer to crash.

Conditions:
Each of the objects/arrays in JSON payload has to consist lesser amount of elements than defined in the "Maximum Array Length" JSON profile attribute.

Impact:
Large enough arrays may cause performance decrease, in addition, the enforcer may crash.

Workaround:
Set "Maximum Array Length" to a lower value than the requests array length.

Fix:
Added internal param "count_overall_child_elements_in_json" to control "Maximum Array/Object Elements" behaviour:
0 (default) - retain current behaviour (check max elements in each array/object separately);
1 - count overall elements in all arrays/objects.

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1013629-4 : URLCAT: Scan finds many Group/User Read/Write (666/664/662) files

Links to More Info: BT1013629

Component: Traffic Classification Engine

Symptoms:
Shared memory files in relation with URLCAT have file permissions set to (-rwxrwxrwx), which is not necessary and needs to be restricted to (-rw-rw-r--).

Conditions:
Policy Enforcement Manager is provisioned

Impact:
Full permission can result in unintentional/unauthorized access, which could result in unexpected behavior of the URLCAT feature.

Workaround:
Manually change permissions from (-rwxrwxrwx) to (-rw-rw-r--) using the chmod command.

Fix:
Shared Memory file permissions are now set to (-rw-rw-r--).

Fixed Versions:
17.0.0, 16.1.2


1013569-1 : Hardening of iApps processing

Links to More Info: K34893234, BT1013569


1012721-4 : Tmm may crash with SIP-ALG deployment in a particular race condition

Links to More Info: BT1012721

Component: Service Provider

Symptoms:
Tmm crashes in SIP-ALG deployment

Conditions:
--- SIP-ALG is deployed
--- While processing first SIP REGISTER at server-side

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
Tmm no longer crashes in this race condition

Fixed Versions:
17.0.0, 16.1.1, 15.1.4.1, 14.1.4.4, 13.1.5


1012581-1 : Evidence of hardware syncookies triggered but no stats after tcp half-open is triggered

Links to More Info: BT1012581

Component: Advanced Firewall Manager

Symptoms:
As soon as global syncookie enabled stats counts starts decrementing and when attack_detection_common callback function calls, the stats range is always under the configured packets per-second threshold, resulting in some tmms not being able to detect the attack but syncookies are already enabled on these tmms, and no statistics are gathered.

Conditions:
A SYN flood attack or similar SYN attack where SYNs are flooded into the BIG-IP system.

Impact:
SYN cookies may still be sent after traffic goes below the attack detection threshold.

Workaround:
Restart tmm

Fix:
Now, global syncookie state changing from full-hardware to non-activated when attack ends.

Fixed Versions:
17.0.0, 16.1.3, 15.1.6.1, 14.1.5


1012365-4 : Nettle cryptography library vulnerability CVE-2021-20305

Links to More Info: K33101555, BT1012365


1012221-1 : Message: childInheritanceStatus is not compatible with parentInheritanceStatus

Links to More Info: BT1012221

Component: Application Security Manager

Symptoms:
The BIG-IP system is unable to deploy a revision of upgraded child policies and you see an error:

Failed pushing changed objects to device <device>: Could not update the Section 'Threat Campaigns'. childInheritanceStatus is not compatible with parentInheritanceStatus.

Conditions:
-- An ASM Child Policy is present on the BIG-IP device in a version earlier than 14.0.0
-- The BIG-IP system is upgraded to version 14.0.0 or later

Impact:
This corruption impacts BIG-IQ interactions with the Child Policy and causes exported Child Policies to be incorrect.

Workaround:
After upgrading, perform the following:

1. Log into the BIG-IP Configuration Utility
2. Go to Security :: Application Security :: Security Policies :: Policies List
3. Select the first Parent Policy
4. Go to Inheritance settings and change Threat Campaigns from None to Optional
5. Click Save Changes
6. Change Threat Campaigns from Optional back to None
7. Click Save Changes
8. Click Apply
9. Repeat steps 3-8 for each additional Parent Policy

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1011433-1 : TMM may crash under memory pressure when performing DNS resolution

Links to More Info: BT1011433

Component: Global Traffic Manager (DNS)

Symptoms:
When running low on free memory, TMM may crash when performing DNS resolution.

Conditions:
-- TMM is under memory pressure.
-- TMM is performing DNS resolution via one of the following mechanisms:
--+ iRule using the "RESOLV::lookup" command
--+ AFM firewall rules that reference hostnames
--+ APM

Impact:
Traffic disrupted while tmm restarts.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1011217-5 : TurboFlex Profile setting reverts to turboflex-base after upgrade

Links to More Info: BT1011217

Component: TMOS

Symptoms:
Custom TurboFlex Profile settings revert to the default turboflex-base profile after an upgrade.

Conditions:
-- iSeries platform with ix800 performance license
-- A non-default TurboFlex Profile is applied
-- The BIG-IP device is upgraded

Impact:
Some features of the previously selected TurboFlex Profile that are not part of the turboflex-base profile, are missing after upgrade. The TurboFlex Profile must be reconfigured after upgrade.

Workaround:
Reconfigure the TurboFlex Profile after upgrade.

Fix:
TurboFlex Profile settings are now preserved after the upgrade.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1


1011069-1 : Group/User R/W permissions should be changed for .pid and .cfg files.

Links to More Info: BT1011069

Component: Application Security Manager

Symptoms:
The following files should be set with lower permissions:
/etc/ts/dcc/dcc.cfg (-rw-rw--w-)
/run/asmcsd.pid (-rw-rw--w-)
/run/bd.pid (-rw-rw--w-)
/run/dcc.pid (-rw-rw--w-)
/run/pabnagd.pid (-rw-rw--w-)

Conditions:
Always

Impact:
Incorrect file permissions.

Workaround:
chmod 664 <files_list>

Fix:
The corrected permissions 664 are applied to the given list of files.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1011065-1 : Certain attack signatures may not match in multipart content

Links to More Info: K39002226, BT1011065

Component: Application Security Manager

Symptoms:
Under certain conditions, ASM may not correctly detect attack signatures.

Conditions:
- ASM provisioned
- Request contains multipart body that matches specific attack signatures.

Impact:
Attack detection is not triggered as expected.

Workaround:
None

Fix:
Attack detection is now triggered as expected.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1


1011061-4 : Certain attack signatures may not match in multipart content

Links to More Info: K39002226, BT1011061

Component: Application Security Manager

Symptoms:
Under certain conditions, ASM may not correctly detect attack signatures.

Conditions:
- ASM provisioned
- Request contains a specially-crafted multipart body

Impact:
Attack detection is not triggered as expected.

Workaround:
None

Fix:
Attack detection is now triggered as expected.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1010617-1 : String operation against DNS resource records cause tmm memory corruption

Links to More Info: BT1010617

Component: Global Traffic Manager (DNS)

Symptoms:
Tmm cores with umem debug enabled.

Conditions:
A string operation is performed against DNS resource records (RRs) in an iRule.

Impact:
Tmm memory corruption. In some situations, tmm could crash. Traffic disrupted while tmm restarts.

Workaround:
Do not use string operation against DNS RRs.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1010597-1 : Traffic disruption when virtual server is assigned to a non-default route domain

Links to More Info: BT1010597

Component: Access Policy Manager

Symptoms:
Assigning a virtual server to a non-default route domain might cause a traffic disruption.

Conditions:
-- An APM virtual server is assigned to a route domain other than 0 (zero, the default).
-- An access policy has an agent that results in tmm communicating to the renderer (e.g., Logon agent, HTTP 401 Response agent, and others).

Impact:
Access policy fails.

Workaround:
1. Log in to the Configuration utility.
2. Go to Network > Route Domains > affected route domain.
3. In the section Parent Name select '0 (Partition Default Route Domain)'.
4. Select Update.

Fixed Versions:
17.0.0, 16.1.3.1, 15.1.6.1, 14.1.5.1


1009949-4 : High CPU usage when upgrading from previous version

Links to More Info: BT1009949

Component: TMOS

Symptoms:
When upgrading version from 12.x to 14.1.4, ospfd has high cpu utilization.

Conditions:
-- OSPF is enabled.
-- The BIG-IP system is upgraded from 12.x to 14.1.4.

Impact:
Performance Impact.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.4


1009725-1 : Excessive resource usage when ixlv drivers are enabled

Links to More Info: K53442005, BT1009725


1009093-2 : GUI widgets pages are not functioning correctly

Links to More Info: BT1009093

Component: Application Visibility and Reporting

Symptoms:
Some links and drop-down fields are not available for 'pressing/clicking' on AVR-GUI widgets pages

Conditions:
AVR/ASM is provisioned

Impact:
Cannot use AVR GUI pages correctly

Workaround:
1. Back up the following file, and then edit it:
/var/ts/dms/amm/templates/overview.tpl

1.a. Remove the following line:
<script type="text/javascript" src="script/analytics_stats.js{{BIGIP_BUILD_VERSION_JS}}"></script>

1.b. Add the following lines after the 'var _default_smtp = '{{smtp_mailer}}';' line:
$(document).ready(function() {
        if(!window.AVR_LOCALIZATION) return;
        $('.need-localization-avr').each(function() {
            var item = $(this);
            if (item.is("input")) {
                var key = "avr." + item.val().replace(/\s/g, '');
                item.val(window.AVR_LOCALIZATION[key] || item.val());
            } else {
                var key = "avr." + item.text().replace(/\s/g, '');
                item.text(window.AVR_LOCALIZATION[key] || item.text());
            }
        }).removeClass('need-localization-avr');
    });

1.c. Save and exit (might require the 'force' save with root user).

2. Log out of the GUI.
3. Log back in.

Fix:
GUI widgets pages now function correctly.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5


1009037-1 : Tcl resume on invalid connection flow can cause tmm crash

Links to More Info: BT1009037

Component: Global Traffic Manager (DNS)

Symptoms:
Tmm crashes.
Tmm logs contain a line that looks like: "Oops @ 0x2bbd463:139: Unallocated flow while polling for rule work. Skipping."

Conditions:
1) iRule uses a function that may suspend iRule processing (see https://support.f5.com/csp/article/K12962 for more about this).
2) The connflow associated with the iRule is being torn down by tmm.
3) Depending upon the exact timing there is a rare chance that the iRule will resume on the wrong connflow which can cause a core.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1008849-4 : OWASP "A4 XML External Entities (XXE)" is not reflecting the XXE signatures configuration.

Links to More Info: BT1008849

Component: Application Security Manager

Symptoms:
To fulfill "A4 XML External Entities (XXE)", some required signatures need to be enforced.

Due to an update in some of those attack signatures names, this section does not find the signatures and by mistake it shows that the signatures are not enforced.

Also, when you choose to enforce the required signatures, this section tries to enforce the signatures, but looks for them via the old name, so it does not find them, and can't enforce them.

Conditions:
The attack signatures file is updated with the new names for the XXE signatures.

The old names are in use while trying to find and enforce the signatures, but it does not find them and can't enforce them and also can't see if they are already enforced.

Impact:
"A4 XML External Entities (XXE)" Compliance can't be fully compliant.

Workaround:
N/A

Fix:
The signature ID is being used instead of signature name, and now it can find them and enforce them if needed.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1


1008837-1 : Control plane is sluggish when mcpd processes a query for virtual server and address statistics

Links to More Info: BT1008837

Component: TMOS

Symptoms:
When there are thousands of rows in the virtual_server_stat table and mcpd receives a query for for all virtual server or virtual address statistics, mcpd can take a long time to process the request.

There might be thousands of rows if thousands of virtual servers server are configured.

There could also be thousands of rows if there are virtual servers configured for source or destination address lists, where those lists contain tens or hundreds of addresses.

Conditions:
-- Thousands of virtual_server_stat rows.
-- mcpd processes a query_stats request for the virtual_server_stat table.

Impact:
When mcpd is processing a query for virtual server statistics:

-- TMSH and GUI access is very slow or non-responsive.
-- SNMP requests timeout.
-- mcpd CPU usage is high.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.4, 14.1.4.4


1008561-4 : In very rare condition, BIG-IP may crash when SIP ALG is deployed

Links to More Info: K44110411, BT1008561


1008501-1 : TMM core

Links to More Info: BT1008501

Component: Local Traffic Manager

Symptoms:
TMM crashes.

Conditions:
Transparent monitors monitoring a virtual server's IP address.

Note: Although this is the current understanding of the issue, it is not clear whether this is an true requirement for the issue to occur.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1008269-1 : Error: out of stack space

Links to More Info: BT1008269

Component: TMOS

Symptoms:
When polling for profile statistics via iControl REST, the BIG-IP system returns an error:

Error: out of stack space

Conditions:
Polling stats via iControl REST.

Impact:
You are intermittently unable to get stats via iControl REST.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1008265-1 : DoS Flood and Sweep vector states are disabled on an upgrade to BIG-IP software versions 14.x and beyond

Links to More Info: K92306170, BT1008265

Component: Advanced Firewall Manager

Symptoms:
DoS Flood and Sweep vector states are disabled after upgrade.

Conditions:
DoS Flood and Sweep vectors are enabled prior to an upgrade to software release 14.x and beyond.

Impact:
DoS Flood and Sweep vector states are disabled. System is susceptible to a DoS attack.

Workaround:
Reset the DoS Flood and Sweep vectors to their previous state.

Fix:
Removed default disabled state from upgrade scripts so that both vectors were restored to previous configured state

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6


1008017-2 : Validation failure on Enforce TLS Requirements and TLS Renegotiation

Links to More Info: BT1008017

Component: Local Traffic Manager

Symptoms:
The configuration load fails with an error:

err mcpd[4182]: 0107186b:3: Invalid "enforce-tls-requirements" value for profile /prod/my_profile. In Virtual Server (/common/my_virtual_server) an http2 profile with enforce-tls-requirements enabled is incompatible with client-ssl/server-ssl profile with renegotiation enabled. Value must be disabled.

Conditions:
BIG-IP system allows this configuration and fails later:

-- Virtual server with HTTP/2, HTTP, and client SSL profiles (with renegotiation disabled).

1. Enable the 'Enforce TLS Requirements' option in the HTTP/2 profile (by default it is enabled).
2. Add server SSL profile with 'TLS Renegotiation' enabled.
3. Save the configuration.
4. Load the configuration.

Impact:
The configuration will not load if saved.

Workaround:
If enabling 'Enforce TLS Requirements' in a HTTP/2 profile configured on a virtual server, ensure that 'TLS Renegotiation' is disabled in the Server SSL profiles on that virtual server.

Fix:
There is now a validation check to prevent this configuration, which is the correct functionality.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1008009-3 : SSL mirroring null hs during session sync state

Links to More Info: BT1008009

Component: Local Traffic Manager

Symptoms:
Tmm crashes.

Conditions:
-- SSL connection mirroring enabled
-- Running a version where ID 760406 is fixed (https://cdn.f5.com/product/bugtracker/ID760406.html)
-- A handshake failure occurs during session sync

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Disable connection mirroring

Fix:
The system now protects for dropped SSL handshakes during connection mirror session sync.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.5


1007901-1 : Support for FIPS 140-3 Module identifier service.

Links to More Info: BT1007901

Component: TMOS

Symptoms:
The module provides a service to output module name/identifier and version that can be mapped to the validation records.
The 'tmsh show sys version' command shows a version, but it does not show a module name, where the "module name" is the name on the FIPS certificate.

Conditions:
Running 'tmsh show sys version' while the system is running in FIPS mode

Impact:
The module does not provide a service to output module name/identifier and version that can be mapped to the validation records.

Workaround:
N/A

Fix:
Added the FIPS module information to output of command "show sys version". FIPS module information is now appended after "Project" field info of the "show sys version"

The syntax of the new field is "FIPS Module <FIPS_module_name>"

In the GUI, FIPS module info shall be appended to existing "Version" information shown under system(tab)→Device→Version

The syntax will be "Version: <Existing Info> <FIPS_module_name>

Fixed Versions:
17.0.0, 16.1.2.2


1007821-3 : SIP message routing may cause tmm crash

Links to More Info: BT1007821

Component: Service Provider

Symptoms:
In very rare circumstances, tmm may core while performing SIP message routing.

Conditions:
This can occur while passing traffic when SIP message routing is enabled.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fix:
SIP message routing no longer results in a core due to internal memory errors in message parsing.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4


1007749-2 : URI TCL parse functions fail when there are interior segments with periods and semi-colons

Links to More Info: BT1007749

Component: Local Traffic Manager

Symptoms:
URI::path, URI::basename, etc., return the wrong strings, e.g., URI::path can return a subset of what it should return.

Conditions:
This happens for URIs like these:
   /alpha/beta/Sample.text;param/trailer/
   /alpha/beta/Sample.text;param/file.txt

Impact:
iRules fail to work as expected for these types of URIs.

This occurs because the combination of the period and semi-colon in 'Some.thing;param' confuses the BIG-IP system parser, causing incorrect results to be returned.

Workaround:
If this is happening for known URIs, then it should be possible to process those URIs in a special way within iRules to do things like temporarily replacing interior periods with another character, like a plus sign.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5


1007677-2 : Artifact resolution on SAML IdP fails with error 'SAML SSO: Cannot find SP connector'

Links to More Info: BT1007677

Component: Access Policy Manager

Symptoms:
SAML fails on APM SAML IdP after receiving the SAML ArtifactResolve Request, and needs to extract Artifact data from sessionDB to build the assertion. An error is logged:

-- err tmm[24421]: 014d1211:3: ::ee23458f:SAML SSO: Cannot find SP connector (/Common/example_idp)
-- err tmm[24421]: 014d0002:3: SSOv2 plugin error(12) in sso/saml.c:11864

Conditions:
The 'session-key' in the sessiondb includes a colon ':' in its value.

Impact:
SAML may fail on APM SAML IdP using artifact binding.

Fix:
The system now handles this occurrence of 'session-key'.

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.4.1


1007489-7 : TMM may crash while handling specific HTTP requests

Links to More Info: K24358905, BT1007489


1007113-3 : Pool member goes DOWN if the time difference between SCTP INIT and SCTP ABORT is less than two seconds

Links to More Info: BT1007113

Component: Service Provider

Symptoms:
In case of diameter over SCTP, while aborting the connection of the pool member, if SCTP INIT is sent by the BIG-IP system before the SCTP ABORT is processed, the pool member is marked UP (provided the SCTP connection is established successfully), and then goes down later, immediately after ABORT is fully processed.

Conditions:
The time difference between SCTP ABORT and SCTP INIT is very small, i.e., 2 seconds or less

Impact:
Pool member is marked DOWN even though it is active

Workaround:
If the watchdog is configured in the diameter session profile (i.e., watchdog-timeout is greater than 0), the pool member is marked UP after DWA is received from the pool member.

Fix:
The system now marks the pool member as UP if DWA is received from the pool member.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1006921-1 : iRules Hardening

Links to More Info: K80970653, BT1006921


1006893-4 : Use of ACCESS::oauth after ACCESS::session create/delete may result in TMM core

Links to More Info: BT1006893

Component: Access Policy Manager

Symptoms:
When ACCESS::oauth is used after ACCESS::session create/delete in an iRule event, TMM may core.

Conditions:
ACCESS::oauth is used after ACCESS::session create/delete in an iRule event.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
No workaround

Fix:
TMM does not core and functionality works as expected.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1006781-2 : Server SYN is sent on VLAN 0 when destination MAC is multicast

Links to More Info: BT1006781

Component: Local Traffic Manager

Symptoms:
TCP connections cannot be established when a multicast destination MAC is used. Traffic outage occurs.

Conditions:
Virtual wire with multicast destination MAC used while establishing TCP connections.

Impact:
Traffic outage.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.4.1


1006157-3 : FQDN nodes not repopulated immediately after 'load sys config'

Links to More Info: BT1006157

Component: Local Traffic Manager

Symptoms:
A DNS query is not sent for configured FQDN nodes until the TTL value expires.

Conditions:
This occurs when 'load sys config' is executed.

Impact:
Name addresses do not resolve to IP addresses until the TTL expires.

Workaround:
You can use either of the following workarounds:

-- Change the default TTL value to be fewer than 300 seconds (the default value is 3600 seconds).

-- Restart dynconfd daemon:
tmsh restart sys service dynconfd

Fixed Versions:
17.0.0.1, 16.1.3.1, 15.1.7, 14.1.5.1


1005109-4 : TMM crashes when changing traffic-group on IPv6 link-local address

Links to More Info: BT1005109

Component: Local Traffic Manager

Symptoms:
TMM crashes when changing the traffic-group on an IPv6 link-local address.

Conditions:
Changing the traffic-group on an IPv6 link-local address.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.5


1005105-3 : Requests are missing on traffic event logging

Links to More Info: BT1005105

Component: Application Security Manager

Symptoms:
Some traffic requests are missing in Security :: Event Logs.

Conditions:
-- Local logging enabled
-- Two or more virtual servers passing heavy traffic

Impact:
High CPU load prevents the Policy Builder from analyzing and sending all traffic requests to the request log.

Workaround:
None

Fix:
The Policy Builder now attempts to send traffic requests to the request log, even when learning analysis is limited due to high CPU load.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.5


1004897-5 : 'Decompression' is logged instead of 'Max Headers Exceeded' GoAway reason

Links to More Info: BT1004897

Component: Local Traffic Manager

Symptoms:
In HTTP2 setup, when the header count from the client request exceeds max-header-count value in the HTTP profile , COMPRESSION_ERROR(0x09) is seen in GoAway frame instead of FRAME_SIZE_ERROR(0x06)

Conditions:
- Virtual server with HTTP2 enabled
- A http2 request has a header count that exceeds 'Maximum Header Count' in the HTTP profile (default value is 64)

Impact:
Wrong GoAway Reason is logged

Fix:
When header count in client request exceeds max-header-count value in HTTP profile
1) FRAME_SIZE_ERROR(0x06) error code sent with GoAway frame
2) In http2 profile stats (tmsh show ltm profile http2 all) 'Max Headers Exceeded' is logged as GoAway reason

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.4.4


1004833 : NIST SP800-90B compliance

Links to More Info: BT1004833

Component: TMOS

Symptoms:
Common Criteria and FIPS 140-2 certifications require compliance with NIST SP800-90B; this completes that compliance.

Conditions:
This applies to systems requiring Common Criteria and/or FIPS 140-2 compliance.

Impact:
BIG-IP systems running without this fix on a release targeted for certification (BIG-IP 14.1.4.2 or BIG-IP 15.1.2.1) will not be running a Common Criteria and/or FIPS 140-2 certified configuration.

Workaround:
None

Fix:
Apply this fix to ensure that the system is compliant with NIST SP800-90B.

Fixed Versions:
17.0.0, 16.1.3, 15.1.4, 14.1.4.2


1004689-4 : TMM might crash when pool routes with recursive nexthops and reselect option are used.

Links to More Info: BT1004689

Component: Local Traffic Manager

Symptoms:
When re-selecting to the non-directly-connected pool route member for which the route was withdrawn, TMM might experience a crash.

Conditions:
- Pool routes with non-directly-connected or recursive nexthops (pool members).
- Reselect option enabled.
- Pool members go down/up so that the re-select is triggered.

Impact:
Traffic disrupted while TMM restarts.

Workaround:
Do not use non-directly-connected/recursive nexthops (pool members) in pool routes.

Fix:
N/A

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1004665 : Secure iAppsLX Restricted Storage issues.

Links to More Info: BT1004665

Component: iApp Technology

Symptoms:
iAppLX restricted storage needs hardening.

Conditions:
iAppLX applications (such as SSL Orchestrator) that contain configuration objects that use restricted parameters like password or passphrase.

Impact:
Stronger encryption needed for sensitive data.

Workaround:
None

Fix:
The iAppLX master key is now stored in mcpd's secure vault as a new secure config object name "iapp_restricted_key".

Fixed Versions:
17.0.0, 16.1.3


1004537-2 : Traffic Learning: Accept actions for multiple suggestions not localized

Links to More Info: BT1004537

Component: Application Security Manager

Symptoms:
When you open the accept suggestions actions list, the actions are not localized. Labels are shown instead of text, for example asm.button.Accept instead of Accept.

Conditions:
This occurs after selecting several suggestions and opening the Accept suggestions actions list.

Impact:
Actions not localized.

Workaround:
None

Fix:
Fixed localization for Accept suggestions actions list.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4


1004069-4 : Brute force attack is detected too soon

Links to More Info: BT1004069

Component: Application Security Manager

Symptoms:
A Brute force attack is detected too soon.

Conditions:
The login page has the expected header validation criteria.

Impact:
The attack is detected earlier than the setpoint.

Workaround:
N/A

Fixed Versions:
17.0.0, 16.1.2, 15.1.5, 14.1.4.5, 13.1.5


1003633-1 : There might be wrong memory handling when message routing feature is used

Links to More Info: BT1003633

Component: Service Provider

Symptoms:
The following log is observed from /var/log/ltm
Oops @ 0x28c3060:232: buf->ref == 0

Conditions:
Message routing is used either by
- Generic message (ltm message-routing generic) or
- HTTP2 with Message router option enabled

Impact:
For most cases, this kind of incorrect memory handling may only generate warning log message. In rare case, it might lead to a tmm crash.

Workaround:
N/A

Fix:
Wrong memory handling in message routing is fixed.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1003257-6 : ZebOS 'set ipv6 next-hop' and 'set ipv6 next-hop local' do not work as expected

Links to More Info: BT1003257

Component: TMOS

Symptoms:
ZebOS 'set ipv6 next-hop' and 'set ipv6 next-hop local' commands are not working properly. The address is always set to interface-configured global/local addresses respectively.

Conditions:
Using BGPv4 with IPv6 capability extension and a route-map with 'set ipv6 next-hop' and/or 'set ipv6 next-hop local' configuration.

Impact:
Wrong next-hop is advertised.

Workaround:
None.

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5, 13.1.5


1002945-4 : Some connections are dropped on chained IPv6 to IPv4 virtual servers.

Links to More Info: BT1002945

Component: Local Traffic Manager

Symptoms:
IPv6 virtual servers targeting IPv4 virtual servers (for example, using the 'virtual' iRule command) might drop traffic coming from some clients unexpectedly.

Conditions:
- IPv6 to IPv4 virtual server chaining.

Impact:
Traffic is dropped.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2, 15.1.4.1, 14.1.4.5


1002809-4 : OSPF vertex-threshold should be at least 100

Links to More Info: BT1002809

Component: TMOS

Symptoms:
OSPF vertex-threshold should be at least 100, but you are able to set it to any number between 0 and 10000000.

Conditions:
-- Using OSPFv2/OSPFv3
-- Configuring the vertex-threshold setting

Impact:
When the setting is less than the default of 100, routes may not be installed properly.

Workaround:
Ensure that vertex-threshold is set to 100 (default) or above.

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.5.1, 14.1.4.6, 13.1.5


1002565-1 : OpenSSL vulnerability CVE-2021-23840

Links to More Info: K24624116, BT1002565


1002385-1 : Fixing issue with input normalization

Links to More Info: K67397230, BT1002385

Component: Application Security Manager

Symptoms:
Under certain conditions, ASM does not follow current best practices.

Conditions:
- ASM provisioned

Impact:
Attack detection is not triggered as expected

Workaround:
N/A

Fix:
Attack detection is now triggered as expected

Fixed Versions:
17.0.0, 16.1.2.1, 15.1.5, 14.1.4.6


1001937-1 : APM configuration hardening

Links to More Info: K57555833, BT1001937


1000789-1 : ASM-related iRule keywords may not work as expected

Links to More Info: BT1000789

Component: Application Security Manager

Symptoms:
Some ASM-related iRule keywords may not work as expected when DoSL7 is used.

Conditions:
ASM iRule keywords are used in a bot defense- or DoSL7-related event, and DoSL7 is used.

Impact:
ASM-related iRule keywords may not work as expected.

Workaround:
None

Fixed Versions:
17.0.0, 16.1.2.2, 15.1.6.1, 14.1.5


1000741-1 : Fixing issue with input normalization

Links to More Info: K67397230, BT1000741

Component: Application Security Manager

Symptoms:
Under certain conditions, ASM does not follow current best practices.

Conditions:
- ASM provisioned

Impact:
Attack detection is not triggered as expected

Workaround:
N/A

Fix:
Attack detection is now triggered as expected

Fixed Versions:
17.0.0, 16.1.1, 15.1.4, 14.1.4.4


1000405-1 : VLAN/Tunnels not listed when creating a new rule via GUI

Links to More Info: BT1000405

Component: Advanced Firewall Manager

Symptoms:
Available tunnels are not displayed on the AFM rules-creation page in the GUI.

Conditions:
-- Navigate to the firewall network rules creation page in the GUI.
-- In the rules source section, under the VLAN/Tunnel dropdown, select the 'specify' option.

Impact:
Available tunnels do not display in the select box. Cannot specify tunnels for firewall rules from the GUI.

Workaround:
Use tmsh to specify tunnels for firewall rules.

Fix:
The available tunnels now display in the VLAN/Tunnels dropdown.

Fixed Versions:
17.0.0, 16.1.1, 15.1.4


1000021-7 : TMM may consume excessive resources while processing packet filters

Links to More Info: K31856317, BT1000021



Known Issues in BIG-IP v16.1.x


TMOS Issues

ID Number Severity Links to More Info Description
934133-3 1-Blocking BT934133 Unable to Create/delete ltm virtual server via CLI transaction when destination is not specified on the ltm virtual object
913713-3 1-Blocking BT913713 Rebooting a blade causes MCPd to core as it rejoins the cluster
1190777-2 1-Blocking   Unable to add a device to a device trust when the BigDB variable icontrol.basic_auth is set to disable on target device
1173441-3 1-Blocking   The 'tmsh save sys config' call is being triggered when REST Authentication tokens (X-F5-Auth-Token) are deleted or expired
1161913-1 1-Blocking BT1161913 Upgrade from 15.1.8 to 16.x or 17.x fails, and leaves device INOPERATIVE
1116845-4 1-Blocking BT1116845 Interfaces using the xnet driver are not assigned a MAC address
1088037-3 1-Blocking BT1088037 VELOS platform's cmp hash has been updated to handle only even ephemeral port numbers
1049085-3 1-Blocking BT1049085 Booting into a newly installed hotfix volume may stall on RAID-capable platforms
1042993-3 1-Blocking K19272127, BT1042993 Provisioning high availability (HA) setup wizard fails to load, reports 'No Access'
997793-3 2-Critical K34172543, BT997793 Error log: Failed to reset strict operations; disconnecting from mcpd
995849-1 2-Critical BT995849 Tmm crash SIGSEGV - rcs_getsalen() in lib/rc_net.c
994033-3 2-Critical BT994033 The daemon httpd_sam does not recover automatically when terminated
993481-1 2-Critical BT993481 Jumbo frame issue with DPDK eNIC
990853-1 2-Critical BT990853 Mcpd restarts on Secondary VIPRION blades upon modifying a vCMP guest's management IP address or gateway.
988645-4 2-Critical BT988645 Traffic may be affected after tmm is aborted and restarted
967905-5 2-Critical BT967905 Attaching a static bandwidth controller to a virtual server chain can cause tmm to crash
967769-1 2-Critical BT967769 During reset of high-speed interfaces, TMMs may mistakenly continue hardware watchdog checks
967573-3 2-Critical BT967573 Qkview generation from Configuration Utility fails
965897-4 2-Critical BT965897 Disruption of mcpd with a segmentation fault during config sync
950201-3 2-Critical BT950201 Tmm core on GCP
937481-5 2-Critical BT937481 Tomcat restarts with error java.lang.OutOfMemoryError
929133-6 2-Critical BT929133 TMM continually restarts with errors 'invalid index from net device' and 'device_init failed'
888765-2 2-Critical BT888765 After upgrading from 13.1.0 to 15.1.0.1 CGNAT is deprovisioned and tmm is restarted by reloaded config from text files
865653-1 2-Critical BT865653 Wrong FDB table entries with same MAC and wrong VLAN combination
858877-5 2-Critical BT858877 SSL Orchestrator config sync issues between HA-pair devices
842669-6 2-Critical BT842669 Syslog-ng / systemd-journald cannot handle logs with embedded newlines, write trailing content to /var/log/user.log
780437-8 2-Critical BT780437 Upon rebooting a VIPRION chassis provisioned as a vCMP host, some vCMP guests can return online with no configuration.
777389-7 2-Critical BT777389 In rare occurrences related to PostgreSQL monitor, the mcpd process restarts
776117-1 2-Critical BT776117 BIG-IP Virtual Edition virtio driver incompatible with Q35 machine type
756830-6 2-Critical BT756830 BIG-IP may fail source translation for connections when connection mirroring is enabled on a virtual server that also has source port set to 'preserve strict'
737692-5 2-Critical BT737692 Handle x520 PF DOWN/UP sequence automatically by VE
721591-2 2-Critical BT721591 Java crashes with core during a basic TLS signature test.
652877-7 2-Critical BT652877 Reactivating the license on a VIPRION system may cause MCPD process restart on all secondary blades
382363-8 2-Critical K30588577 min-up-members and using gateway-failsafe-device on the same pool.
1209709-4 2-Critical BT1209709 Memory leak in icrd_child when license is applied through BIG-IQ
1195377 2-Critical   Getting SI log for non approved RSA-1024 crypto algorithm.
1191137-3 2-Critical BT1191137 WebUI crashes when the localized form data fails to match the expectations
1181613-1 2-Critical BT1181613 IPsec IKEv2: BIG-IP version 16.1.0 introduced RFC5996 non-compliance in IKE SA delete
1178221-3 2-Critical BT1178221 In IPsec IKEv2, packet memory corruption after retransmitted ISAKMP with NAT
1144477-1 2-Critical BT1144477 IKE_SA_INIT uses src port 500 and dst port 4500 after IKE SA deleted
1136429-4 2-Critical BT1136429 Closing of unrelated MCPD connection causes an errant reply to an in-progress transaction or request group
1134301-3 2-Critical BT1134301 IPsec interface mode may stop sending packets over tunnel after configuration update
1128629 2-Critical BT1128629 Neurond crash observed during live install through test script
1110893-4 2-Critical BT1110893 Some portions of the BIG-IP GUI do not work when accessed behind an HTTP proxy
1105901-2 2-Critical BT1105901 Tmm crash while doing high-speed logging
1095217-1 2-Critical BT1095217 Peer unit incorrectly shows the pool status as unknown after merging the configuration
1093717-1 2-Critical BT1093717 BGP4 SNMP traps are not working.
1085805-2 2-Critical   UCS restore with SSL Orchestrator deployed fails due to multiple iFiles and incorrect iFile reference.
1085597-1 2-Critical BT1085597 IKEv1 IPsec peer cannot be created in config utility (web UI)
1077789-4 2-Critical BT1077789 System might become unresponsive after upgrading.
1076909-4 2-Critical BT1076909 Syslog-ng truncates the hostname at the first period.
1075905-3 2-Critical BT1075905 TCP connections may fail when hardware SYN Cookie is active
1039609-1 2-Critical BT1039609 Unable to poll Dynamic routing protocols SNMP OID's on non-default route domain
1035121-4 2-Critical BT1035121 Configsync syncs the node's monitor status
1027961-2 2-Critical BT1027961 Changes to an admin user's account properties may result in MCPD crash and failover
1024269-1 2-Critical BT1024269 Forcing a file system check on the next system reboot does not check all filesystems.
1023829-2 2-Critical BT1023829 Security->Policies in Virtual Server web page spins mcpd 100%, which later cores
1014361-2 2-Critical BT1014361 Config sync fails after provisioning APM or changing BIG-IP license
1012493-5 2-Critical BT1012493 Systemauth.primaryadminuser set to anything but 'admin' causes internal error for mcp-state check
1004929-1 2-Critical BT1004929 During config sync operation, MCPD restarts on secondary blade logging 01020012:3: A unsigned four-byte integer message item is invalid.
1004517-1 2-Critical BT1004517 BIG-IP tenants on VELOS cannot install EHFs
999021-2 3-Major BT999021 IPsec IKEv1 tunnels fail after a config sync from Standby to Active
998957-1 3-Major BT998957 MCPD consumes excessive CPU while collecting statistics
998649-1 3-Major BT998649 Hostnames that contain a period are logged incorrectly
998225-6 3-Major BT998225 TMM crash when disabling/re-enabling a blade that triggers a primary blade transition.
997561-5 3-Major BT997561 TMM CPU imbalance with GRE/TB and GRE/MPLS traffic
997541-5 3-Major BT997541 Round-robin GRE Disaggregator for hardware and software
996145-1 3-Major BT996145 After UCS restore on HA pair, one of the devices is missing folder /var/config/rest/iapps/f5-iappslx-ssl-orchestrator
995605-2 3-Major BT995605 PVA accelerated traffic does not update route domain stats
995097-1 3-Major BT995097 Certain management-dhcp supersede options fail to restore correctly when the configuration is reloaded from a file.
994365-1 3-Major BT994365 Inconsistency in tmsh 'object mode' for some configurations
994361-2 3-Major BT994361 Updatecheck script hangs/Multiple updatecheck processes
992813-7 3-Major BT992813 The list of dhcp-options known to mcpd is outdated, leading to the inability to instantiate certain management-dhcp configurations.
992449-1 3-Major BT992449 The vCMP host does not report the correct number of guest CPUs on the guest page of the GUI
992253-4 3-Major BT992253 Cannot specify IPv6 management IP addresses using GUI
992053-4 3-Major BT992053 Pva_stats for server side connections do not update for redirected flows
988745-4 3-Major BT988745 On reboot, 'could not find platform object' errors may be seen in /var/log/ltm
987949-2 3-Major BT987949 Error message during boot up
987301-3 3-Major BT987301 Software install on vCMP guest via block-device may fail with error 'reason unknown'
987081-1 3-Major BT987081 Alarm LED remains active on Secondary blades even after LCD alerts are cleared
981485-6 3-Major BT981485 Neurond enters a restart loop after FPGA update.
977953-3 3-Major BT977953 Show running config interface CLI could not fetch the interface info and crashes the imi
967557-1 3-Major BT967557 Improve apm logging when loading sys config fails due to corruption of epsec rpm database
966949-6 3-Major BT966949 Multiple FQDN ephemeral nodes not deleted upon deleting FQDN template node
964125-6 3-Major BT964125 Mcpd cores while processing a query for node statistics when there are thousands of FQDN nodes and pool members.
962477-2 3-Major BT962477 REST calls that modify GTM objects as a user other than admin may take longer than expected
959241-1 3-Major BT959241 Fix for ID871561 might not work as expected on the VCMP host
959057-5 3-Major BT959057 Unable to create additional login tokens for the default admin user account
958601-4 3-Major BT958601 In the GUI, searching for virtual server addresses does not match address lists
957993-4 3-Major BT957993 Unable to set a port list in the GUI for an IPv6 address for a virtual server
955953-5 3-Major BT955953 iRule command 'table' fails to resume when used with Diameter 'irule_scope_msg'
953477-1 3-Major BT953477 Syncookie HW mode not cleared when modifying VLAN config.
950153-3 3-Major BT950153 LDAP remote authentication fails when empty attribute is returned
948601-1 3-Major BT948601 File object checksum attribute is not updated when an external data-group file or external monitor file is edited from GU
945413-2 3-Major BT945413 Loop between keymgmtd and mcpd causes BIG-IP to be out of sync or in constant automatic config sync
939249-1 3-Major BT939249 iSeries LCD changes to secure mode after multiple reboots
938145-3 3-Major BT938145 DAG redirects packets to non-existent tmm
936093-5 3-Major BT936093 Non-empty fipserr files loaded from a UCS archive can cause a FIPS BIG-IP platform to remain offline
935485-4 3-Major BT935485 BWC: flows might stall when using dynamic BWC policy
931797-3 3-Major BT931797 LTM virtual address netmask does not persist after a reboot
930393-2 3-Major BT930393 IPsec tunnel does not start after an upgrade, first configuration, or reconfiguration
928353-4 3-Major BT928353 Error logged installing Engineering Hotfix: Argument isn't numeric
927025-1 3-Major BT927025 Sod restarts continuously
925469-2 3-Major BT925469 SubjAltName (SAN) cannot be sent in the Certificate Order Manager for Comodo / Sectigo
924297-4 3-Major BT924297 Ltm policy MCP objects are not being synced over to the peer device
922613-6 3-Major BT922613 Tunnels using autolasthop might drop traffic with ICMP route unreachable
922153-5 3-Major BT922153 Tcpdump is failing on tmm 0.x interfaces
922053-1 3-Major BT922053 inaccurate number of trunk members reported by bcm56xxd/bcmLINK
921149-6 3-Major BT921149 After applying static bandwidth controller on a virtual server, any changes to the virtual server disassociates the BWC policy
915493-6 3-Major BT915493 imish command hangs when ospfd is enabled
913013-1 3-Major BT913013 Racoon daemon may crash once at startup
908753-5 3-Major BT908753 Password memory not effective even when password policy is configured
908453-5 3-Major BT908453 Trunks with names longer than 32 characters update working-mbr-count in vCMP guests incorrectly
904713-2 3-Major BT904713 FailoverState device status and CM device status do not match shortly after triggering failover
904401-5 3-Major BT904401 Guestagentd core
894593-2 3-Major BT894593 High CPU usage caused by the restjavad daemon continually crashing and restarting
891333-2 3-Major K32545132, BT891333 Very rarely the HSB can get into a corrupted state resulting in ARP entry in BIG-IP stuck incomplete.
888081-6 3-Major BT888081 BIG-IP VE Migration feature fails for 1NIC
884729-1 3-Major BT884729 The vCMP CPU usage stats are incorrect
882609-7 3-Major BT882609 ConfigSync status remains 'Disconnected' after setting ConfigSync IP to 'none' and back
880689-1 3-Major   Update oprofile tools for compatibility with current architecture
879969-8 3-Major BT879969 FQDN node resolution fails if DNS response latency >5 seconds
872165-4 3-Major BT872165 LDAP remote authentication for REST API calls may fail during authorization
867549-1 3-Major BT867549 LCD touch panel reports "Firmware update in progress" indefinitely
867253-4 3-Major BT867253 Systemd not deleting user journals
851837-1 3-Major BT851837 Mcpd fails to start for single NIC VE devices configured in a trust domain
844925-5 3-Major BT844925 Command 'tmsh save /sys config' fails to save the configuration and hangs
838597-5 3-Major BT838597 Unable to load license/dossier when going down for vCMP
814273-6 3-Major BT814273 Multicast route entries are not populating to tmm after failover
809089-4 3-Major BT809089 TMM crash after sessiondb ref_cnt overflow
804529-1 3-Major BT804529 REST API to /mgmt/tm/ltm/pool/members/stats will fail for some pools
803157-4 3-Major BT803157 LTM log contains shutdown sequence logs after boot_marker as logs are buffered until BIG-IP reboots
798885-6 3-Major BT798885 SNMP response times may be long when processing requests
796985-4 3-Major BT796985 Default IPv4 IP address is assigned to Alt-Address in isolated vCMP guest; vCMP host or guest are upgraded and guest is 'Inoperative'
780745-5 3-Major BT780745 TMSH allows creation of duplicate community strings for SNMP v1/v2 access
778513-3 3-Major BT778513 APM intermittently drops log messages for per-request policies
775845-6 3-Major BT775845 Httpd fails to start after restarting the service using the iControl REST API
775797-5 3-Major BT775797 Previously deleted user account might get authenticated
760982-3 3-Major BT760982 An NLRI with a default route information is not propagated on 'clear ip bgp <neighbor router-id> soft out' command in some scenarios
760400-1 3-Major BT760400 High number of vcmp guests on clusters and discovery appliances may result in retries for guest deployment
760354-7 3-Major BT760354 Continual mcpd process restarts after removing big logs when /var/log is full
759258-7 3-Major BT759258 Instances shows incorrect pools if the same members are used in other pools
757787-5 3-Major BT757787 Unable to edit LTM/AFM Policies that belong to an Application Service (iApp) using the WebUI.
755207-3 3-Major BT755207 Large packets silently dropped on VE mlxvf5 devices
749757-4 3-Major BT749757 -s option in qkview help does not indicate maximum size
737739-4 3-Major BT737739 Bash shell still accessible for admin even if disabled
718291-4 3-Major BT718291 iHealth upload error does not clear
711747-2 3-Major BT711747 Vcmp_pde_state_memcpy core during http traffic and pfmand resets.
703226-3 3-Major BT703226 Failure when using transactions to create and publish policies
698594-4 3-Major K53752362, BT698594 Cave Creek Crypto hardware reports a false positive of a stuck queue state
691219-3 3-Major BT691219 Hardware syncookie mode is used when global auto last hop is disabled.
690928-6 3-Major BT690928 System posts error message: 01010054:3: tmrouted connection closed
673952-6 3-Major BT673952 1NIC VE in high availability (HA) device-group shows 'Changes Pending' after reboot
662301-8 3-Major BT662301 'Unlicensed objects' error message appears despite there being no unlicensed config
658850-6 3-Major BT658850 Loading UCS with the platform-migrate parameter could unexpectedly set or unset management DHCP
612083-3 3-Major BT612083 The System Event Log may list correctable hardware, PCIe or DMI errors.
605966-9 3-Major BT605966 BGP route-map changes may not immediately trigger route updates
566995-2 3-Major BT566995 bgpd might crash in rare circumstances.
528314-2 3-Major K16816, BT528314 Generating new default certificate and key pairs for BIG-IP ssl profiles via CLI will not be reflected in GUI or in tmsh
499348-14 3-Major BT499348 System statistics may fail to update, or report negative deltas due to delayed stats merging.
493740-4 3-Major BT493740 tmsh allows cipher group creation with non-existent "require" or "exclude" cipher rule.
431503-11 3-Major K14838, BT431503 TMSH crashes in rare initial tunnel configurations
342319-1 3-Major   BIND forwarder server list and the recursion and forward options.
1211089-3 3-Major BT1211089 Traffic to IPv6 all nodes address not received by TMM on VE with ixlv driver
1209465 3-Major BT1209465 When vCMP host is rebooted, oldEngineID is not restored on guest
1194409-2 3-Major BT1194409 Dropped messages seen in auditforwarder logging
1186649 3-Major BT1186649 TMM keep crashing after vCMP Guest Upgrade to BIG-IP v16.1.3.2
1185605-3 3-Major BT1185605 The iCall EventTriggeredHandler in non-common partition break after scriptd daemon restart
1182993 3-Major   MCPD returns dossier error 01 after reboot
1181757-4 3-Major BT1181757 BGPD assert when sending an update due to cq_wbuf mishandling
1169141-3 3-Major BT1169141 Bash tab-completion of '~' to '\~'
1166329-2 3-Major BT1166329 The mcpd process fails on secondary blades, if the predefined classification applications are updated.
1154381-4 3-Major BT1154381 The tmrouted might crash when management route subnet is received over a dynamic routing protocol
1153865-4 3-Major BT1153865 Restjavad OutOfMemoryError errors and restarts after upgrade
1153853-4 3-Major BT1153853 Revision of default value for provision.restjavad.extramb to avoid OOM errors in restjavad
1146017-1 3-Major   WebUI does not displays error when parent rewrite profile is not assigned to user defined rewrite profile
1145749-4 3-Major BT1145749 Locally defined BIG-IP users can be lost during a failed config-sync
1137269-4 3-Major BT1137269 MCPD fails to reply if a request is proxied to another daemon and the connection to that daemon closes
1136921-4 3-Major BT1136921 BGP might delay route updates after failover
1136781-2 3-Major BT1136781 Incorrect parsing of 'bfd notification' CLI in IMI Shell (imish)
1135393-1 3-Major BT1135393 The pfmand support is not available on i15820-DF (D120)
1134509-4 3-Major BT1134509 TMM crash in BFD code when peers from ipv4 and ipv6 families are in use.
1134057-4 3-Major BT1134057 BGP routes not advertised after graceful restart
1132957-1 3-Major BT1132957 Modifying IPsec tunnels tunnel object may result in TMM core
1132949-4 3-Major BT1132949 GUI reported error when changing password after mgmt port was changed
1128169-1 3-Major BT1128169 TMM core when IPsec tunnel object is reconfigured
1127881-2 3-Major BT1127881 Deprecate sysClientsslStatFullyHwAcceleratedConns, sysClientsslStatPartiallyHwAcceleratedConns and sysClientsslStatNonHwAcceleratedConns
1127169 3-Major BT1127169 The BIG-IP can reboot due to failure to initialize the OpenSSL FIPS RNG
1126805-3 3-Major BT1126805 TMM CPU usage statistics may show a lower than expected value on Virtual Edition
1126181-2 3-Major BT1126181 ZebOS "no log syslog" configuration is not surviving reboot
1125733-3 3-Major BT1125733 Wrong server-side window scale used in hardware SYN cookie mode
1124733-1 3-Major   Unnecessary internal traffic is observed on the internal tmm_bp vlan
1124209-3 3-Major BT1124209 Duplicate key objects when renewing certificate using pkcs12 bundle
1123885-2 3-Major BT1123885 A specific type of software installation may fail to carry forward the management port's default gateway.
1122021-3 3-Major BT1122021 Killall command might create corrupted core files
1121517-2 3-Major BT1121517 Interrupts on Hyper-V are pinned on CPU 0
1120345-6 3-Major BT1120345 Running tmsh load sys config verify can trigger high availability (HA) failover
1114137-4 3-Major   LibUV library for latest bind 9.16
1113961-1 3-Major K43391532, BT1113961 BIG-IP 16.1.3 VE with FIPS 140-3 May Fail to start in AWS-China
1112649 3-Major BT1112649 FIPS 140-2/FIPS 140-3 compliant mode is incorrect after upgrade to 16.1.2.2
1112537-2 3-Major BT1112537 LTM/GTM config instantiated in a certain way can cause a LTM/GTM monitor to fail to delete.
1112109-4 3-Major BT1112109 Unable to retrieve SCP files using WinSCP or relative path name
1111629-4 3-Major BT1111629 Messages with "Failed Read: User, referer" are logged in /var/log/httpd/httpd_errors
1111421-1 3-Major BT1111421 TMSH/GUI fails to display IPsec SAs info
1106489-2 3-Major BT1106489 GRO/LRO is disabled in environments using the TMM raw socket "sock" driver.
1103953-1 3-Major BT1103953 SSMTP errors in logs every 20 minutes
1102849-3 3-Major BT1102849 Less-privileged users (guest, operator, etc) are unable to run top level commands
1101453-1 3-Major BT1101453 MCPD SIGABRT and core happened while deleting GTM pool member
1100409-4 3-Major   Valid connections may fail while a virtual server is in SYN cookie mode.
1100321 3-Major BT1100321 MCPD memory leak
1093973-7 3-Major BT1093973 Tmm may core when BFD peers select a new active device.
1093553-4 3-Major BT1093553 OSPF "default-information originate" injects a new link-state advertisement
1093313-2 3-Major BT1093313 CLIENTSSL_CLIENTCERT iRule event is not triggered for TLS1.3 when the client sends an empty certificate response
1091725-4 3-Major BT1091725 Memory leak in IPsec
1090313-3 3-Major BT1090313 Virtual server may remain in hardware SYN cookie mode longer than expected
1088429-4 3-Major BT1088429 Kernel slab memory leak
1086517-2 3-Major BT1086517 TMM may not properly exit hardware SYN cookie mode
1086393-1 3-Major BT1086393 Sint Maarten and Curacao are missing in the GTM region list
1085837-2 3-Major BT1085837 Virtual server may not exit from hardware SYN cookie mode
1081649-2 3-Major BT1081649 Remove the "F5 iApps and Resources" link from the iApps->Package Management
1081641-4 3-Major BT1081641 Remove Hyperlink to Legal Statement from Login Page
1080925-3 3-Major BT1080925 Changed 'ssh-session-limit' value is not reflected after restarting mcpd
1080297-1 3-Major BT1080297 ZebOS does not show 'log syslog' in the running configuration, or store it in the startup configuration
1079705-4 3-Major BT1079705 Restjavad may restart repeatedly if sys db provision.extramb is high
1077533-1 3-Major BT1077533 BIG-IP fails to restart services after mprov runs during boot.
1077405-2 3-Major BT1077405 Ephemeral pool members may not be created with autopopulate enabled.
1076801-4 3-Major BT1076801 Loaded system increases CPU usage when using CS features
1076785-2 3-Major BT1076785 Virtual server may not properly exit from hardware SYN Cookie mode
1074841-1 3-Major BT1074841 Invalid syslog configuration kills syslog-ng after restarting syslog-ng.
1074053-1 3-Major BT1074053 Delay in displaying the "Now Halting..." message while performing halt from LCD.
1073429-1 3-Major BT1073429 Auth partition definition is incorrectly synchronized to peer and then altered.
1072081-1 3-Major BT1072081 Imish segmentation fault when running 'ip pim sparse-mode ?' on interface config.
1067797-1 3-Major BT1067797 Trunked interfaces that share a MAC address may be assigned in the incorrect order.
1064893-1 3-Major BT1064893 Keymgmtd memory leak occurrs while configuring ca-bundle-manager.
1064257-2 3-Major BT1064257 Bundled SSL certificates may not get revalidated successfully over OCSP after stapling parameters have been modified.
1063597-1 3-Major BT1063597 Memory leak in rewrite in some cases when no pool is selected on virtual server
1063237-4 3-Major BT1063237 Stats are incorrect when the management interface is not eth0
1062953-1 3-Major BT1062953 Unable to save configuration via tmsh or the GUI.
1062901-1 3-Major BT1062901 The 'trap-source' and 'network' SNMP properties are ineffective, and SNMP traps may be sent from an unintended interface.
1062857-3 3-Major BT1062857 Non-tmm source logs stop populating after a system time change.
1061905-3 3-Major BT1061905 Adding peer unit into device trust changes the failover address family.
1060181-3 3-Major BT1060181 SSL handshakes fail when using CRL certificate validator.
1059293-1 3-Major BT1059293 During DPD config changes, the IKEv2 tunnel may not start.
1058789-2 3-Major BT1058789 Virtual addresses are not created from an address list that includes an IP address range.
1058765-2 3-Major BT1058765 Virtual Addresses created from an address list with prefix all say Offline (enabled)
1057709-4 3-Major BT1057709 Invalid Certificate for all BIG-IP VE OVA images on vCenter 7.0U2.
1057501-4 3-Major BT1057501 Expired DST Root CA X3 resulting in http agent request failing.
1057305-1 3-Major BT1057305 On deployments that use DPDK, "-c" may be logged as the TMM process/thread name.
1050457-1 3-Major BT1050457 The "Permitted Versions" field of "tmsh show sys license" only shows on first boot
1046261-1 3-Major BT1046261 Asynchronous REST task IDs do not persist across process restarts
1045277-4 3-Major BT1045277 The /var partition may become 100% full requiring manual intervention to clear space
1044281-1 3-Major BT1044281 In some cases, cpcfg does not trigger selinux relabel, leaving files unlabeled
1044089-3 3-Major BT1044089 ICMP echo requests to virtual address gets a response even when the virtual server is offline when updated from GUI.
1044021-2 3-Major BT1044021 Searching for IPv4 strings in statistics module does not work.
1043141-1 3-Major BT1043141 Misleading 'Symmetric Unit Key decrypt failure - decrypt failure' when loading UCS from another BIG-IP
1042589-1 3-Major BT1042589 Wrong trunk_id is associated in bcm56xxd.
1041317-1 3-Major BT1041317 MCPD delay in processing a query_all message if the update_status bit is set
1040573-4 3-Major BT1040573 REST operation takes a long time when two different users perform tasks in parallel
1040277-4 3-Major BT1040277 Syslog-ng issue may cause logging to stop and possible reboot of a system
1040117-2 3-Major BT1040117 BIG-IP Virtual Edition drops UDP packets
1036613-3 3-Major BT1036613 Client flow might not get offloaded to PVA in embryonic state
1036557-1 3-Major BT1036557 Monitor information not seen in GUI
1036541-4 3-Major BT1036541 Inherited-traffic-group setting of floating IP does not sync on incremental sync
1036461-4 3-Major BT1036461 icrd_child may core with high numbers of open file descriptors.
1036097-4 3-Major BT1036097 VLAN failsafe does not trigger on guest
1035661-4 3-Major BT1035661 REST Requests return 401 Unauthorized when using Basic Auth
1033689-1 3-Major BT1033689 BGP route map community value cannot be set to the required range when using AA::NN notation
1033333-4 3-Major   FIPS: importing a stub SSL key file results in 2 keys that share the same FIPS device
1032821-7 3-Major BT1032821 Syslog: invalid level/facility from /usr/libexec/smart_parse.pl
1032257-1 3-Major BT1032257 Forwarded PVA offload requests fail on platforms with multiple PDE/TMM
1032001-2 3-Major BT1032001 Statemirror address can be configured on management network or clusterd restarting
1031117-1 3-Major BT1031117 The mcpd error for virtual server profiles incompatible needs to have more details
1031025-3 3-Major BT1031025 Nitrox 3 FIPS: Upgrade from v12.1.x to v14.1.x results in new .key.exp files for the FIPS keys created before upgrade.
1029105-1 3-Major BT1029105 Hardware SYN cookie mode state change logs bogus virtual server address
1027481-3 3-Major BT1027481 The log messages 'error: /bin/haloptns unexpected error -- 768' generated on A110 and D112 platforms
1027477-3 3-Major BT1027477 Virtual server created with address-list in custom partition non-RD0 does not create listener
1027237-1 3-Major BT1027237 Cannot edit virtual server in GUI after loading config with traffic-matching-criteria
1026989-1 3-Major BT1026989 More specific dynamic or static routes created for application traffic processing can erroneously replace the route to the management subnet.
1026973-1 3-Major BT1026973 Static routes created for application traffic processing can erroneously replace the route to the management subnet.
1026861-3 3-Major BT1026861 Live Update of Browser Challenges and Anti-Fraud are not cleaned up
1026581-4 3-Major BT1026581 NETFLOW/IPFIX observationTimeMilliseconds Information Element value is not populated correctly.
1026273-4 3-Major BT1026273 HA failover connectivity using the cluster management address does not work on VIPRION platforms
1025513-1 3-Major BT1025513 PAM Authenticator can cause authorization failure if it fails to lock /var/log/tallylog
1024421-2 3-Major BT1024421 At failover, ePVA flush leads to clock advancing and MPI timeout messages in TMM log
1022997-1 3-Major BT1022997 TCP segments with an incorrect checksum are transmitted when the sock driver is used in AWS deployments (e.g., 1NIC)
1021925-4 3-Major BT1021925 During bootup AWS BIG-IP endpoint was not licensed when custom gateway configured over management interface
1021873-1 3-Major BT1021873 TMM crash in IPIP tunnel creation with a pool route
1021109-4 3-Major BT1021109 The cmp-hash VLAN setting does not apply to trunked interfaces.
1020277-1 3-Major BT1020277 Mcpd may run out of memory when build image is missing
1020129-2 3-Major BT1020129 Turboflex page in GUI reports 'profile.Features is undefined' error
1020089-1 3-Major BT1020089 MCP validation should prevent defining multiple virtual servers with the same virtual address but with different subnet masks
1020005-1 3-Major BT1020005 OOM errors after upgrade and VE instance unresponsive
1019793-2 3-Major BT1019793 Image2disk does not work on F5OS BIG-IP tenant.
1019749-2 3-Major BT1019749 Enabling DHCP for management should not be allowed on vCMP guest
1019709-1 3-Major BT1019709 Modifying mgmt-dhcp options should not be allowed on VCMP guest
1019429-1 3-Major BT1019429 CMP Forwarded flows do not get syncache counter decremented when only server-side is PVA accelerated
1019285-1 3-Major BT1019285 Systemd hangs and is unresponsive
1019129-4 3-Major BT1019129 Changing syslog remote port requires syslog-ng restart to take effect
1018673-1 3-Major BT1018673 Virtual Edition systems replicate host traffic to all TMMs when a multicast MAC address is the traffic's nexthop
1018165-1 3-Major BT1018165 GUI display of DHCPv6 profile not correct for virtual server in non-default route-domain
1017897-1 3-Major BT1017897 Self IP address creation fails with 'ioctl failed: No such device'
1017857-1 3-Major BT1017857 Restore of UCS leads to incorrect UID on authorized_keys
1015453-1 3-Major BT1015453 Under some circumstances, the "Local Traffic" menu in System -> Configuration is inaccessible in the GUI
1015093-1 3-Major BT1015093 The "iq" column is missing from the ndal_tx_stats table
1014285-5 3-Major BT1014285 Set auto-failback-enabled moved to false after upgrade
1012601-4 3-Major BT1012601 Alarm LED and LCD alert cleared prematurely on startup for missing PSU input
1012449-1 3-Major BT1012449 Unable to edit custom inband monitor in the GUI
1012049-1 3-Major BT1012049 Incorrect virtual server list returned in response to status request
1011265-3 3-Major BT1011265 Failover script cannot read /config/partitions/ after upgrade
1010341-4 3-Major BT1010341 Slower REST calls after update for CVE-2021-22986
1009793-2 3-Major   Tmm crash when using ipsec
1009337-2 3-Major BT1009337 LACP trunk down due to bcm56xxd send failure
1007909-1 3-Major BT1007909 Tcpdump with :p (peer flow) flag does not capture forwarded between TMMs
1006345-4 3-Major BT1006345 Static mac entry on trunk is not programmed on CPU-only blades
1004469-1 3-Major BT1004469 SNMP OID ltmSipsessionProfileStatVsName and ltmSiprouterProfileStatVsName returns empty string
1003629 3-Major BT1003629 PAYG license becomes invalid when swapping associated NICs for instances in both Azure and AWS.
1002417-2 3-Major BT1002417 Switch L2 forwarding entries learnt on multi-blade trunk in one blade needs to be synchronized to other blades of that trunk
1001129-1 3-Major   Maximum Login Failures lockout for root and admin
1001069-5 3-Major BT1001069 VE CPU usage higher after upgrade, given same throughput
1000325-1 3-Major BT1000325 UCS load with 'reset-trust' may not work properly if base configuration fails to load
992241-3 4-Minor BT992241 Unable to change initial admin password from GUI after root password change
986821-1 4-Minor BT986821 Command 'run util bash' event is not captured in log when initially executed
976517-2 4-Minor BT976517 Tmsh run sys failover standby with a device specified but no traffic group fails
964533-2 4-Minor BT964533 Multiple session_process_pending_event_callback ERROR: could not send callback messages get logged in the tmm logs.
933597-5 4-Minor BT933597 Mandatory arguments missing in tmsh security protocol-inspection profile help
929173-3 4-Minor BT929173 Watchdog reset due to CPU stall detected by rcu_sched
928665-4 4-Minor BT928665 Kernel nf_conntrack table might get full with large configurations.
927441-5 4-Minor BT927441 Guest user not able to see virtual server details when ASM policy attached
915473-4 4-Minor BT915473 Accessing Dashboard page with AVR provisioned causes continuous audit logs
915141-5 4-Minor BT915141 Availability status of virtual server remains 'available' even after associated pool's availability becomes 'unknown'
904661-4 4-Minor BT904661 Mellanox NIC speeds may be reported incorrectly on Virtual Edition
889813-3 4-Minor BT889813 Show net bwc policy prints bytes-per-second instead of bits-per-second
860573-6 4-Minor BT860573 LTM iRule validation performance improvement by tracking procedure/event that have been validated
843293-1 4-Minor BT843293 When L7 performance FPGA is loaded, "tmsh show sys fpga" shows standard-balanced-fpga.
808481-6 4-Minor BT808481 Hertfordshire county missing from GTM Region list
807309-5 4-Minor BT807309 Incorrect Active/Standby status in CLI Prompt after failover test
760496-4 4-Minor BT760496 Traffic processing interrupted by PF reset
753712-4 4-Minor BT753712 Incorrect warning: Traffic Matching Criteria's inline source address has been set to any4 from any6 to match inline destination address' address family.
723633-1 4-Minor BT723633 Crypto traffic such as SSL may stop working in certain conditions
714705-8 4-Minor BT714705 Excessive 'The Service Check Date check was skipped' log messages.
713183-7 4-Minor BT713183 Malformed JSON files may be present on vCMP host
712241-8 4-Minor BT712241 A vCMP guest may not provide guest health stats to the vCMP host
696363-7 4-Minor BT696363 Unable to create SNMP trap in the GUI
690781-4 4-Minor BT690781 VIPRION systems with B2100 or B2150 blades cannot run certain combinations of vCMP guest sizes
689147-6 4-Minor BT689147 Confusing log messages on certain user/role/partition misconfiguration when using remote role groups
674026-6 4-Minor BT674026 iSeries AOM web UI update fails to complete.
673573-8 4-Minor   tmsh logs boost assertion when running child process and reaches idle-timeout
659579-6 4-Minor BT659579 Timestamps in icrd, restjavad, and restnoded logs are not synchronized with the system time
658943-5 4-Minor BT658943 Errors when platform migration process is loading UCS using trunks on vCMP guest/F5OS Tenants
646768-6 4-Minor K71255118, BT646768 VCMP Guest CM device name not set to hostname when deployed
550526-3 4-Minor K84370515, BT550526 Some time zones prevent configuring trust with a peer device using the GUI.
539648-4 4-Minor K45138318, BT539648 Disabled db var Watchdog.State prevents vCMP guest activation.
447522-1 4-Minor BT447522 GUI: SNMPV3 Incorrectly requires "OID" when creating an SNMP user.
1213277 4-Minor BT1213277 Certificate order manager configuration using DigiCert URL fails in the BIG-IP
1209589-4 4-Minor BT1209589 BFD multihop does not work with ECMP routes
1185257-4 4-Minor BT1185257 BGP confederations do not support 4-byte ASNs
1155733-1 4-Minor   NULL bytes are clipped from the end of buffer
1154685-3 4-Minor BT1154685 Error log "Database error (13)" seen during the bootup
1144729-4 4-Minor BT1144729 PVA stats may be incorrect when PVA offloaded flows have their nexthops changed to a different VLAN
1142445-4 4-Minor BT1142445 Multicast handling on wildcard virtual servers leads to TMM memory leak
1141213-2 4-Minor BT1141213 Peer is aborting the connection when PEM client runs diameter traffic over SCTP
1136837-4 4-Minor BT1136837 TMM crash in BFD code due to incorrect timer initialization
1121169-3 4-Minor BT1121169 Unable to resize the /appdata: /dev/mapper/vg--db--sda-dat.appdata when in use
1117305-6 4-Minor BT1117305 The /api, a non-existent URI returns different error response with or without correct Basic Authorization credentials
1114253-4 4-Minor BT1114253 Weighted static routes do not recover from BFD link failures
1105757-1 4-Minor BT1105757 Creating CSR with invalid parameters for basic-constraints, tmsh does not generate meaningful errors
1101741-2 4-Minor BT1101741 Virtual server with default pool down and iRule pool up will flap for a second during a full config-sync.
1096461-5 4-Minor BT1096461 TACACS system-auth Accounting setting has no effect when set to send-to-all-servers/send-to-first-server
1095973-3 4-Minor BT1095973 Config load failure when Trusted CA Bundle is missing and URL is present in the Bundle Manager
1095205-4 4-Minor BT1095205 Config.auditing.forward.multiple db Variable with value "none" is not working as expected with multiple destination addresses in audit_forwarder.
1090441-1 4-Minor BT1090441 IKEv2: Add algorithm info to SK_ logging
1089005-4 4-Minor BT1089005 Dynamic routes might be missing in the kernel on secondary blades.
1082193-3 4-Minor BT1082193 TMSH: Need to update the version info for SERVER_INIT in help page
1077293-2 4-Minor BT1077293 APPIQ option still showing in BIG-IP GUI even though its functionality migrated to BIG-IQ.
1076897-4 4-Minor BT1076897 OSPF default-information originate command options not working properly
1076253-1 4-Minor BT1076253 IKE library memory leak
1073965-1 4-Minor BT1073965 IPsec IKEv2 tunnel may report huge "life" for IKE SA.
1067653-2 4-Minor BT1067653 Ndisc6 is not working with non-default route domain.
1065821-4 4-Minor BT1065821 Cannot create an iRule with a newline between event and opening brace.
1064753-4 4-Minor BT1064753 OSPF LSAs are dropped/rate limited incorrectly.
1063609 4-Minor BT1063609 Observed "Failed to start Jitterentropy Gatherer Daemon" during bootup
1062385-4 4-Minor BT1062385 BIG-IP has an incorrect limit on the number of monitored HA-group entries.
1060769-1 4-Minor BT1060769 The /mgmt/tm/sys/performance/all-stats and /mgmt/tm/sys/performance/throughput iControl REST endpoints cannot be successfully parsed by common JSON libraries.
1060721-2 4-Minor BT1060721 Unable to disable auto renew in Certificate order manager via GUI.
1057925-4 4-Minor BT1057925 GTP iRule generates a warning.
1055053-4 4-Minor BT1055053 "tmsh load sys config default" does not clear Zebos config files.
1054497-1 4-Minor BT1054497 Tmsh command "show sys fpga" does not report firmware for all blades.
1053037-7 4-Minor BT1053037 MCP error on loading a UCS archive with a global flow eviction policy
1050413-4 4-Minor BT1050413 Drive model HGST HUS722T1TALA604 must be added to pendsect drives.xml.
1044893 4-Minor BT1044893 Kernel warnings from NIC driver Realtek 8139
1036265-4 4-Minor BT1036265 Overlapping summary routes might not be advertised after ospf process restart.
1035017-6 4-Minor   Remove unused CA-bundles
1034509-6 4-Minor BT1034509 Sensor read errors on VIPRION C2200 chassis
1033969-4 4-Minor BT1033969 MPLS label stripping needs next protocol indicator
1032921-4 4-Minor BT1032921 VCMP Guest CPU usage shows abnormal values at the Host
1029173-4 4-Minor BT1029173 MCP daemon does not log an error message upon connection failure to PostgreSQL server.
1025965-1 4-Minor BT1025965 Audit role users cannot see folder properties under sys-folder
1024301-1 4-Minor BT1024301 Missing required logs for "tmsh modify disk directory" command
1023817-2 4-Minor BT1023817 Misleading "Enabling NAT64 for virtual server with security NAT policy configured is redundant/not required." warning
1022297-4 4-Minor BT1022297 In BIG-IP GUI using "Select All" with filters is not working appropriately for policies
1020109-1 4-Minor BT1020109 Subnet mask property of virtual addresses not displayed in management GUI
1011081-3 4-Minor BT1011081 Connection lost to the Postgres client during the BIG-IP bootup process
1010785-3 4-Minor BT1010785 Online help is missing for CRL in client SSL profile and server SSL profile
1010761-3 4-Minor BT1010761 Missing TMSH help description for client-ssl profile 'CRL'
1006449-1 4-Minor BT1006449 The default size of the subagent object cache possibly leading to slow snmp response time
1003469-1 4-Minor BT1003469 The BIG-IP GUI fails to reset the statistics for an IPv6 pool member and returns an error.
1003081-3 4-Minor BT1003081 GRE/TB-encapsulated fragments are not forwarded.
989937-2 5-Cosmetic BT989937 Device Trust Certificates Expiring after 2038-01-19 show date of 1969
1072173-1 5-Cosmetic BT1072173 The BIG-IP system incorrectly presents legacy ways of defining mirroring properties
1022421-4 5-Cosmetic BT1022421 Pendsec utility incorrectly starts on i2x00/i4x00 platform with NON WD disk


Local Traffic Manager Issues

ID Number Severity Links to More Info Description
1112349-4 1-Blocking BT1112349 FIPS Card Cannot Initialize
999669-1 2-Critical BT999669 Some HTTPS monitors are failing after upgrade when config has different SSL option
949137-1 2-Critical BT949137 Clusterd crash and vCMP guest failover
938545-1 2-Critical BT938545 Oversize plugin Tcl object results can result in 0-length messages and plugin crash
937649-4 2-Critical BT937649 Flow fwd broken with statemirror.verify enabled and source-port preserve strict
935193-4 2-Critical BT935193 With APM and AFM provisioned, single logout ( SLO ) fails
927633-4 2-Critical BT927633 Failure path in external datagroup internal mapping operation failure may result in 'entry != NULL' panic
851385-8 2-Critical BT851385 Failover takes too long when traffic blade failure occurs
797573-1 2-Critical BT797573 TMM assert crash with resulting in core generation in multi-blade chassis
758491-5 2-Critical BT758491 When using NetHSM integration, after upgrade to 14.1.0 or later (or creating keys using fipskey.nethsm), BIG-IP cannot use the keys
632553-6 2-Critical K14947100, BT632553 DHCP: OFFER packets from server are intermittently dropped
599135-4 2-Critical BT599135 B2250 blades may suffer from high TMM CPU utilisation with tcpdump
1205501-2 2-Critical BT1205501 The iRule command SSL::profile can select server SSL profile with outdated configuration
1186249-2 2-Critical BT1186249 TMM crashes on reject rule
1156697-3 2-Critical BT1156697 Translucent VLAN groups may pass some packets without changing the locally administered bit
1146377-2 2-Critical BT1146377 FastHTTP profiles do not insert HTTP headers triggered by iRules
1134257-2 2-Critical BT1134257 TMM cores when pingaccess profile is modified multiple times and configuration is loaded
1132405-4 2-Critical BT1132405 TMM does not process BFD echo pkts with src.addr == dst.addr
1127725 2-Critical BT1127725 Performance drop with the AES_CCM 128 cipher
1126093 2-Critical BT1126093 DNSSEC Key creation failure with internal FIPS card.
1110813-3 2-Critical   Improve MPTCP retransmission handling while aborting
1100721-2 2-Critical BT1100721 IPv6 link-local floating self-IP breaks IPv6 query to BIND
1100249-2 2-Critical BT1100249 SNAT with FLOW_INIT firewall rule may core TMM due to wrong type of underlying flow structure
1099545-2 2-Critical BT1099545 Tmm may core when PEM virtual with a simple policy and iRule is being used
1091021-2 2-Critical BT1091021 The BIG-IP system may take no fail-safe action when the bigd daemon becomes unresponsive.
1078741-2 2-Critical BT1078741 Tmm crash
1073897-2 2-Critical BT1073897 TMM core due to memory corruption
1072377-3 2-Critical BT1072377 TMM crash in rare circumstances during route changes
1070181-3 2-Critical BT1070181 Secondary MCPD crashes with Configuration error
1067669-1 2-Critical BT1067669 TCP/UDP virtual servers drop all incoming traffic.
1064649-2 2-Critical BT1064649 Tmm crash after upgrade.
1060369-1 2-Critical BT1060369 HTTP MRF Router will not change serverside load balancing method
1053305-2 2-Critical BT1053305 TMM crashes with assertion "vmem_hashlist_remove not found."
1039145-1 2-Critical BT1039145 Tenant mirroring channel disconnects with peer and never reconnects after failover.
1030185-5 2-Critical BT1030185 TMM may crash when looking up a persistence record using "persist lookup" iRule commands
1024241-1 2-Critical BT1024241 Empty TLS records from client to BIG-IP results in SSL session termination
998253-4 3-Major BT998253 SNI configuration is not sent via HTTPS when in-tmm monitors are disabled
996649-6 3-Major BT996649 Improper handling of DHCP flows leading to orphaned server-side connections
994081-1 3-Major BT994081 Traffic may be dropped with an Immediate idle timeout setting
991265-3 3-Major BT991265 Persistence entries point to the wrong servers for longer periods of time
985925-3 3-Major BT985925 Ipv6 Routing Header processing not compatible as per Segments Left value.
985749-1 3-Major BT985749 TCP exponential backoff algorithm does not comply with RFC 6298
985401-1 3-Major BT985401 ProxySSL virtual servers should work with web acceleration (ramcache) profiles attached
984897-1 3-Major BT984897 Some connections performing SSL mirroring are not handled correctly by the Standby unit.
978953-3 3-Major BT978953 The value of the sys db variable vlan.backplane.mtu intermittently out-of-sync with the value of the MTU of the kernel interface tmm_bp during the initial boot up
976525-5 3-Major BT976525 Transparent monitors can have the incorrect source address when snat.hosttraffic is enabled
975725-5 3-Major BT975725 Wildcard virtual servers do not forward L3 unicast traffic sent to L2 broadcast
968949-7 3-Major BT968949 Keepalives aren't sent in FIN_WAIT_2 when using a TCP profile
967353-1 3-Major BT967353 HTTP proxy should trim spaces between a header field-name and colon in its downstream responses.
966785-1 3-Major BT966785 Rate Shaping stops TCP retransmission
961653-3 3-Major BT961653 Unable to retrieve DNS link statistics via SNMP OID gtmLinkStatRate
961001-5 3-Major BT961001 Arp requests not resolved for snatpool members when primary blade goes offline
958785-8 3-Major BT958785 FTP data transfer does not complete after QUIT signal
956133-2 3-Major BT956133 MAC address might be displayed as 'none' after upgrading.
948065-1 3-Major BT948065 DNS Responses egress with an incorrect source IP address.
947125-7 3-Major BT947125 Unable to delete monitors after certain operations
945189-5 3-Major BT945189 HTTPS monitor fails due to missing ECDHE-RSA-AES256-CBC-SHA
944173-4 3-Major BT944173 SSL monitor stuck does not change TLS version
942217-6 3-Major BT942217 Virtual server keeps rejecting connections for rstcause 'VIP down' even though virtual status is 'available'
937573-1 3-Major BT937573 Connections drop in virtual server with Immediate Action On Service Down set to Drop
932461-5 3-Major BT932461 Cert update on server SSL profile on HTTPS monitor: BIG-IP not using the updated certificate.
928445-5 3-Major BT928445 HTTPS monitor is down when server_ssl profile cipher string is configured to TLSv1_2
927589-1 3-Major BT927589 ILX::call command response get truncated
922641-6 3-Major BT922641 Any iRules that park in a clientside or serverside command leave the iRule attached to the wrong flow
921541-6 3-Major BT921541 When certain sized payloads are gzipped, the resulting payload is chunked, incorrect, and is never delivered to the client due to missing end of chunk marker.
912293-5 3-Major BT912293 Persistence might not work properly on virtual servers that utilize address lists
907177-5 3-Major BT907177 Priority of embedded APM iRules is ignored
906653-1 3-Major BT906653 Server side UDP immediate idle-timeout drops datagrams
905477-6 3-Major BT905477 The sdmd daemon cores during config sync when multiple devices configured for iRules LX
901569-4 3-Major BT901569 Loopback traffic might get dropped when VLAN filter is enabled for a virtual server.
891145-7 3-Major BT891145 TCP PAWS: send an ACK for half-open connections that receive a SYN with an older TSVal
888885-3 3-Major BT888885 BIG-IP Virtual Edition TMM restarts frequently without core
887265-4 3-Major BT887265 BIG-IP systems may fail to come online after upgrade with ASM and VLAN-failsafe configuration
887045-7 3-Major BT887045 The session key does not get mirrored to standby.
881937-2 3-Major BT881937 TMM and the kernel choose different VLANs as source IPs when using IPv6.
881065-5 3-Major BT881065 Adding port-list to Virtual Server changes the route domain to 0
878641-3 3-Major BT878641 TLS1.3 certificate request message does not contain CAs
878253-5 3-Major BT878253 LB::down no longer sends an immediate monitor probe
876569-2 3-Major BT876569 QAT compression codec produces gzip stream with CRC error
874877-4 3-Major BT874877 The bigd monitor reports misleading error messages
867985-6 3-Major BT867985 LTM policy with a 'shutdown' action incorrectly allows iRule execution
862001-6 3-Major BT862001 Improperly configured NTP server can result in an undisciplined clock stanza
857769-1 3-Major BT857769 FastL4+HTTP or FastL4+Hash-Persistence virtual servers do not work correctly in DSR mode.
851121-6 3-Major BT851121 Database monitor DBDaemon debug logging not enabled consistently
846977-7 3-Major BT846977 TCP:collect validation changed in 12.0.0: the first argument can no longer be zero
812693-5 3-Major BT812693 Connection in FIN_WAIT_2 state may fail to be removed
805561-1 3-Major BT805561 Change of pool configuration in OneConnect environment can impact active traffic
779137-7 3-Major BT779137 Using a source address list for a virtual server does not preserve the destination address prefix
778501-5 3-Major BT778501 LB_FAILED does not fire on failure of HTTP/2 server connection establishment
751451-4 3-Major BT751451 When upgrading to v14.0.0 or later, the 'no-tlsv1.3' option is missing from HTTPS monitors automatically created server SSL profiles
739475-6 3-Major BT739475 Site-Local IPv6 Unicast Addresses support.
679316-8 3-Major BT679316 iQuery connections reset during SSL renegotiation
574762-4 3-Major BT574762 Forwarding flows leak when a routing update changes the egress vlan
369640-8 3-Major K17195 iRules might return incorrect data when multiple partitions and/or folders contain objects with the same name
1216053-4 3-Major BT1216053 Regular monitors do not use options from SSL profiles
1215165-1 3-Major BT1215165 Support added for Microsoft Azure Managed HSM
1210469-3 3-Major BT1210469 TMM can crash when processing AXFR query for DNSX zone
1205045-4 3-Major BT1205045 WMI monitor does not put pool members into an offline/unchecked state when BIG-IP receives HTTP responses other than 200
1188837 3-Major BT1188837 Server side timewait close state causes long establishment under port reuse on i15820DF
1185929-2 3-Major BT1185929 Under rare circumstances, the TCL interpreter can crash TMM after a long time
1185133-2 3-Major BT1185133 ILX streaming plugins limited to MCP OIDs less than 10 million
1184153-2 3-Major BT1184153 TMM crashes when you use the rateshaper with packetfilter enabled
1166481-3 3-Major BT1166481 The vip-targeting-vip fastL4 may core
1159569-2 3-Major BT1159569 Persistence cache records may accumulate over time
1155393-2 3-Major BT1155393 Failure to remove chunk headers from chunked response with Rewrite/HTML profile and compression
1148181 3-Major BT1148181 SSL TLS1.3 connection terminates with "empty persist key" error when SSL persistence is enabled and session tickets are disabled
1148065-2 3-Major BT1148065 HTTP::header exists and value iRule commands will not return successful even if the header is present
1146241-2 3-Major BT1146241 FastL4 virtual server may egress packets with unexpected and erratic TTL values
1144845-4 3-Major BT1144845 GARPs from a newly active unit may be bridged for a brief time while the peer chassis transitions to standby
1144117-3 3-Major BT1144117 "More data required" error when using the 'HTTP::payload' and 'HTTP::payload length' commands
1143833-2 3-Major BT1143833 ILX (iRules LX) may corrupt tmstat (profile statistics) memory
1141845-4 3-Major BT1141845 RULE_INIT with a call that contains an extra colon character (:) will crash BIG-IP.
1137521 3-Major BT1137521 TLSv1.3 connections dropped when SSL Persistence enabled
1135313-4 3-Major BT1135313 Pool member current connection counts are incremented and not decremented
1133881-2 3-Major BT1133881 Errors in attaching port lists to virtual server when TMC is used with same sources
1133625-2 3-Major BT1133625 The HTTP2 protocol is not working when SSL persistence and session ticket are enabled
1126841-3 3-Major BT1126841 HTTP::enable can rarely cause cores
1126329-2 3-Major BT1126329 SSL Orchestrator with explicit proxy mode with proxy chaining enabled fails to send the CONNECT
1125381-2 3-Major BT1125381 Extraneous warnings recorded in when using only intermediate certificates
1123169-1 3-Major BT1123169 Error saving an iRule when calling a procedure from HTML_TAG_MATCHED event
1117609-2 3-Major   VLAN guest tagging is not implemented for CX4 and CX5 on ESXi
1115041-1 3-Major BT1115041 BIG-IP does not forward the response received after GOAWAY, to the client.
1113181-2 3-Major BT1113181 Self-IP allows no traffic following a modification from "Allow Custom (Include Default)" to "Allow Custom".
1112745-2 3-Major BT1112745 System CPU Usage detailed graph is not accessible on Cerebrus+
1112385-3 3-Major BT1112385 Traffic classes match when they shouldn't
1112205-3 3-Major BT1112205 HTTP/2 may garble responses if the client-side stream aborts while response headers are on the wire
1111473-4 3-Major BT1111473 "Invalid monitor rule instance identifier" error after sync with FQDN nodes
1110949-2 3-Major BT1110949 Updating certKeyChain of parent SSL profile using iControl does not change the cert and key outside certKeyChain of the child profile
1110485-3 3-Major BT1110485 SSL handshake failures with invalid profile error
1110165-3 3-Major BT1110165 Fasthttp connections infrequently fail
1109953-4 3-Major BT1109953 TMM may crash if a data-group is used when an SSL Forward Proxy Bypass/Intercept list contains extremely long entry
1107605-1 3-Major BT1107605 TMM crash reported with specific policy settings
1107565 3-Major BT1107565 SSL Persistence behavior change for TLS1.3 connection between v16.1.0 and v16.1.2.2
1106673-3 3-Major BT1106673 Tmm crash with FastL4 virtual servers and CMP disabled
1105969-1 3-Major BT1105969 Gratuitous ARP not issued for non-floating self-IP on clicking "Update" via the GUI
1104553-2 3-Major BT1104553 HTTP_REJECT processing can lead to zombie SPAWN flows piling up
1102429-2 3-Major BT1102429 iRule 'reject' command under 'FLOW_INIT' event does not send the reject packet out in some cases.
1101697-4 3-Major BT1101697 TLS1.3 connection failure with 0-RTT and Hello Retry Request (HRR).
1101181-2 3-Major BT1101181 HTTP request payload not forwarded by BIG-IP when serverside is HTTP/2 and HTTP MRF router is enabled on virtual server
1099373-2 3-Major BT1099373 Virtual Servers may reply with a three-way handshake when disabled or when processing iRules
1099229-4 3-Major BT1099229 SSL does not resume/reset async LTM policy events correctly when both policy and iRules are present
1096893-1 3-Major BT1096893 TCP syncookie-initiated connections may end up unexpectedly IP-fragmenting packets mid-connection
1093061-2 3-Major BT1093061 MCPD restart on secondary blade during hot-swap of another blade
1091969-3 3-Major BT1091969 iRule 'virtual' command does not work for connections over virtual-wire.
1091785-2 3-Major BT1091785 DBDaemon restarts unexpectedly and/or fails to restart under heavy load
1088597-2 3-Major BT1088597 TCP keepalive timer can be immediately re-scheduled in rare circumstances
1088173-2 3-Major BT1088173 With TLS 1.3, client Certificate is stored after HANDSHAKE even if retain-certificate parameter is disabled in SSL profile
1087569-4 3-Major BT1087569 Changing max header table size according HTTP2 profile value may cause stream/connection to terminate
1086473-3 3-Major BT1086473 BIG-IP resumes a TLS session on the client-side but then proceeds to do a full handshake
1084965-3 3-Major BT1084965 Low visibility of attack vector
1083621-1 3-Major BT1083621 The virtio driver uses an incorrect packet length
1083589-3 3-Major BT1083589 Some connections are dropped on chained IPv6 to IPv4 virtual servers.
1080985-1 3-Major   Route Domain ID specified in Address list does not take effect on virtual server IP via TMC.
1080569-2 3-Major   BIG-IP prematurely closes clientside HTTP1.1 connection when serverside is HTTP2 and HTTP MRF router is enabled on virtual server
1079769-1 3-Major BT1079769 Tmm utilizing the virtio driver might crash after modifying several IPv6 virtual servers
1079237-1 3-Major BT1079237 After certain configuration tasks are performed, TMM may run with stale SNAT translation parameters.
1078357-2 3-Major BT1078357 HTTP_REJECT processing can lead to zombie SPAWN flows
1077553-3 3-Major BT1077553 Traffic matches the wrong virtual server after modifying the port matching configuration
1076577-3 3-Major BT1076577 iRule command 'connects' fails to resume when used with Diameter/Generic-message 'irule_scope_msg'
1075045-1 3-Major BT1075045 Proxy initialization failed, Defaulting to DENY, after applying additional profile to a virtual server
1074505-1 3-Major BT1074505 Traffic classes are not attached to virtual server at TMM start
1072397-1 3-Major BT1072397 VLAN failsafe failover does not occur in three-node device group
1071385-3 3-Major BT1071385 SSL session resumption is incorrectly logging handshake failure messages
1070957-1 3-Major BT1070957 Database monitor log file backups cannot be rotated normally.
1069001 3-Major BT1069001 TMM crash in TLS/SSL processing
1068673-3 3-Major BT1068673 SSL forward Proxy triggers CLIENTSSL_DATA event on bypass.
1067469-4 3-Major   Discrepancy in virtual server stats with LRO enabled.
1065353-1 3-Major BT1065353 Disabling ciphers does not work due to the order of cipher suite.
1065013-4 3-Major BT1065013 Tmm crash with iRuleLX plugin in use
1063865-7 3-Major BT1063865 Blade remains in an INOPERATIVE state after being moved to new chassis.
1060541-1 3-Major BT1060541 Increase in bigd CPU utilization from 13.x when SSL/TLS session resumption is not utilized by HTTPS pool members due to Open SSL upgrade
1060029-1 3-Major BT1060029 MRHTTP proxy can leak init_args and attached streams/flows.
1060021-1 3-Major BT1060021 Using OneConnect profile with RESOLVER::name_lookup iRule might result in core.
1059573-4 3-Major BT1059573 Variation in a case insensitive value of an operand in LTM policy may fail in some rules.
1057561 3-Major BT1057561 Occasional Nitrox5 zip engine hang.
1056941-2 3-Major BT1056941 HTTPS monitor continues using cached TLS version after receiving fatal alert.
1053741-4 3-Major BT1053741 Bigd may exit and restart abnormally without logging a reason
1051153-4 3-Major BT1051153 DHCP fails intermittently when the connection is through BIG-IP.
1043985-1 3-Major BT1043985 After editing an iRule, the execution order might change.
1043009 3-Major BT1043009 TMM dump capture for compression engine hang
1040957-1 3-Major BT1040957 The ipother profile can be used with incompatible profiles in a virtual server
1040465-3 3-Major BT1040465 Incorrect SNAT pool is selected
1040045-3 3-Major BT1040045 Unable to delete trunk member on a VCMP guest
1040017-5 3-Major BT1040017 Final ACK validation during flow accept might fail with hardware SYN Cookie
1039349-1 3-Major BT1039349 HTTP statistics not updated
1039277-4 3-Major BT1039277 TMM core
1037645-4 3-Major BT1037645 TMM may crash under memory pressure when using iRule 'AES::key' command
1036873-2 3-Major BT1036873 Pre-shared key extension sometimes is not the last extension in ClientHello in TLS1.3
1036093-4 3-Major BT1036093 Tmm sends out neighbor advertisements for the link local addresses even if IPv6 is disabled
1036013-3 3-Major BT1036013 BIG-IP systems may terminate connections prematurely when a TLS close-notify alert is received
1034953-3 3-Major BT1034953 In explicit proxy, HTTP_STATCODE missing from syslog
1033937-1 3-Major BT1033937 HTTP message router stats do not increment for virtual servers and pools
1033537-4 3-Major   Cookie persistence profile only examines the first cookie.
1029069-2 3-Major BT1029069 Non-ASCII characters are not displayed correctly.
1026781-3 3-Major BT1026781 Standard HTTP monitor send strings have double CRLF appended
1025089-1 3-Major BT1025089 Pool members marked DOWN by database monitor under heavy load and/or unstable connections
1023529-2 3-Major BT1023529 FastL4 connections with infinite timeout may become immune to manual deletion and remain in memory.
1021837-3 3-Major BT1021837 When a virtual server has an inline service profile configured, connections will be reset with cause "No server selected"
1020069-1 3-Major BT1020069 Equinix SmartKey HSM is not working with nethsm-partition 'fortanix'
1019641-3 3-Major BT1019641 SCTP INIT_ACK not forwarded
1018765-1 3-Major BT1018765 Changing the sshd port breaks some BIG-IP utilities on a multi-bladed system
1017885-5 3-Major BT1017885 Wildcard server-name does not match multiple labels in FQDN
1017801-1 3-Major BT1017801 Internal listeners (cgc, ftp data, etc) all share the same listener_key stats
1017421-4 3-Major BT1017421 SASP Monitor does not log significant error conditions at default logging level
1017029-5 3-Major BT1017029 SASP monitor does not identify specific cause of failed SASP Registration attempt
1016921-3 3-Major BT1016921 SSL Connection mirroring - session resumption does not occur on standby when the session ticket is enabled
1016909-1 3-Major BT1016909 BIG-IP iRule commands FLOW::this or FLOW::peer can create zombie flows.
1016589-1 3-Major BT1016589 Incorrect expression in STREAM::expression might cause a tmm crash
1016433-2 3-Major BT1016433 URI rewriting is incorrect for "data:" and "javascript:"
1015817-1 3-Major BT1015817 Flows rejected due to no return route do not increment rejection stats
1014633-4 3-Major BT1014633 Transparent / gateway monitors may fail if there is no route to a node
1013597-2 3-Major BT1013597 `HTTP2::disable serverside` can reset flows
1013209-5 3-Major BT1013209 BIG-IP components relying on ca-bundle.crt may stop working after upgrade
1012813-1 3-Major BT1012813 Statsd can deadlock with rrdshim with the error that a stats file "is not an RRD file"
1012009-3 3-Major BT1012009 MQTT Message Routing virtual may result in TMM crash
1010209-1 3-Major BT1010209 BIG-IP configuration allows literal CR and LF characters in LTM monitor send and recv strings
1009921-3 3-Major BT1009921 'SSL::verify_result' iRule command may return incorrect value when combined with dynamic CRL check
1006857-1 3-Major BT1006857 Adding a source address list to a virtual server in a partition with a non-default route domain fails.
1004609-6 3-Major BT1004609 SSL forward proxy virtual server may set empty SSL session_id in server hello.
1002969-4 3-Major BT1002969 Csyncd can consume excessive CPU time
1000561-5 3-Major BT1000561 HTTP chunked encoding markers incorrectly passed to HTTP/2 client-side
1000069-3 3-Major BT1000069 Virtual server does not create the listener
999709-6 4-Minor BT999709 iRule 'pool'/'virtual' commands not triggered in CLIENT_ACCEPTED with HTTP/2.
997357-1 4-Minor BT997357 iRule command "SSL:session invalidate" not working as expected
990173-1 4-Minor BT990173 Dynconfd repeatedly sends the same mcp message to mcpd
987401-1 4-Minor BT987401 Increased TMM memory usage on standby unit after pool flap
962177-6 4-Minor BT962177 Results of POLICY::names and POLICY::rules commands may be incorrect
947745-3 4-Minor BT947745 Tcp proxy does not ignore HUDEVT_CHILD_CONNECTED and gives an error
940837-4 4-Minor BT940837 The iRule command node is not triggered in CLIENT_ACCEPTED with HTTP/2.
932553-6 4-Minor BT932553 An HTTP request is not served when a remote logging server is down
929429-8 4-Minor BT929429 Oracle/SQL database monitor uses excessive CPU when Platform FIPS is licensed
921993-1 4-Minor BT921993 LTM policy with a 'contains' operator does not work as expected when using an external data group.
904537-1 4-Minor BT904537 The csyncd process may keep trying to sync the GeoIP database to a secondary blade
829021-1 4-Minor BT829021 BIG-IP does not account a presence of http2 profile when response payload is modified
683534-2 4-Minor BT683534 'tmsh show sys connection' command prompt displaying 4 billion connections is misleading
1211189-3 4-Minor BT1211189 Stale connections observed and handshake failures observed with errors
1156105-2 4-Minor BT1156105 Proxy Exclusion List is not configurable if VLAN group and route-domain are in non default partition
1142225-2 4-Minor BT1142225 Regular and In-TMM HTTPS monitors advertise different cipher suites with SSL profile is set to None
1138101-2 4-Minor BT1138101 Tunnel connections might not come up when using pool routes
1137717-2 4-Minor BT1137717 There are no dynconfd logs during early initialization
1133557-2 4-Minor BT1133557 Identifying DNS server BIG-IP is querying to resolve LTM node FQDN name
1132765-4 4-Minor BT1132765 Virtual server matching might fail in rare cases when using virtual server chaining.
1128505-2 4-Minor BT1128505 HTTP::disable/enable sequence before first request may result in premature HUDEVT_ACCEPTED to proxy
1124085-4 4-Minor BT1124085 iRules command [info hostname] does not reflect modified hostname
1122377-2 4-Minor BT1122377 If-Modified-Since always returns 304 response if there is no last-modified header in the server response
1121349-2 4-Minor BT1121349 CPM NFA may stall due to lack of other state transition
1107453 4-Minor BT1107453 Performance drop observed in some Ramcache::HTTP tests on BIG-IP i10800 platform
1103617-4 4-Minor BT1103617 'Reset on Timeout' setting might be ignored when fastl4 is used with another profile.
1103117-2 4-Minor BT1103117 iAppLX extension using express with httpserver script leaves lingering client-side flow on HTTP requests.
1101369-1 4-Minor   MQTT connection stats are not updated properly
1093545-4 4-Minor BT1093545 Attempts to create illegal virtual-server may lead to mcpd crash.
1070141-1 4-Minor BT1070141 The SNAT Automap and self IP address selection.
1067025-4 4-Minor BT1067025 Rate-shaping + immediate timeout causing connection to stall.
1064725-4 4-Minor BT1064725 CHMAN request for tag:19 as failed.
1037153-1 4-Minor BT1037153 iRule "log" command to remote destinations may cause TMM to leak memory
1035757-4 4-Minor BT1035757 iRulesLX restart leaves stale files in /var/tmstat/blade/tmplugin_ilx_*
1034865-1 4-Minor BT1034865 CACHE::enable failed on private/no-store content
1034217-2 4-Minor BT1034217 Quic_update_rtt can leave ack_delay uninitialized.
1030533-1 4-Minor BT1030533 The BIG-IP system may reject valid HTTP responses from OCSP servers.
1030093-1 4-Minor BT1030093 An http2 to http2 virtual connection with translate-address disabled might only use one stream on the server side.
1027805-4 4-Minor BT1027805 DHCP flows crossing route-domain boundaries might fail.
1016045-4 4-Minor BT1016045 OOPS logging may appear while active ftp if the port command forces a cmp_redirection and a quit follows.
1015793-1 4-Minor BT1015793 Length value returned by TCP::payload is signed and can appear negative
1015117-5 4-Minor BT1015117 Headers are corrupted during modification/insertion if a mix of end-of-line markers <CRLF> and <LF> are used
1013937-1 4-Minor BT1013937 In-TMM HTTP and HTTPS monitors require RFC-compliant send strings to work.
1011889-6 4-Minor BT1011889 The BIG-IP system does not handle DHCPv6 fragmented traffic properly
1004953-5 4-Minor BT1004953 HTTP does not fall back to HTTP/1.1
979213-1 5-Cosmetic BT979213 Spurious spikes are visible in Throughput(bits) and Throughput(packets) performance graphs following a restart of TMM.
926085-2 5-Cosmetic BT926085 In WebUI node or port monitor test is not possible, but it works in TMSH
897437-7 5-Cosmetic BT897437 First retransmission might happen after syn-rto-base instead of minimum-rto.
860277-6 5-Cosmetic BT860277 Default value of TCP Profile Proxy Buffer High Low changed in 14.1
1035741-1 5-Cosmetic BT1035741 Wrong default value for lacp-port-priority.


Performance Issues

ID Number Severity Links to More Info Description
908001-2 2-Critical BT908001 vCMP guest CPU usage may increase 4-5% after upgrade of vCMP host to v16.1.x
1127445-3 2-Critical BT1127445 Performance degradation after Bug ID 1019853
1063173-2 2-Critical BT1063173 Blob size consistency after changes to pktclass.
1037617-1 2-Critical BT1037617 Switching between bare-metal and vCMP modes can leave HSM with poorly deployed accelerator engine counts
475997-2 3-Major K16687, BT475997 SSL stream throughput slows down when hardware SSL offloading is in use


Global Traffic Manager (DNS) Issues

ID Number Severity Links to More Info Description
1211341-4 1-Blocking   Failed to delete custom monitor after dissociating from virtual server
940733-5 2-Critical BT940733 Downgrading a FIPS-enabled BIG-IP system or running big3d_install results in a system halt
931149-3 2-Critical BT931149 Some RESOLV::lookup queries, including PTR lookups for RFC1918 addresses, return empty strings
887681-4 2-Critical BT887681 Tmm SIGSEGV in rrset_array_lock,services/cache/rrset.c
705869-1 2-Critical BT705869 TMM crashes as a result of repeated loads of the GEOIP database
1212081-2 2-Critical BT1212081 The zxfrd segfault and restart loop due to incorrect packet processing
1137485-2 2-Critical BT1137485 Gtmd produces excessive logging and may also crash (SIGSEGV) repeatedly
1127241-1 2-Critical BT1127241 AS3 tenants don't sync reliably in GTM sync groups.
1103833-2 2-Critical BT1103833 Tmm core with SIGSEGV in gtmpoolmbr_UpdateStringProc
1081473-5 2-Critical BT1081473 GTM/DNS installations may observe the mcpd process crashing
1073273-1 2-Critical BT1073273 RESOLVER::name_lookup not returning truncated responses
1031945-4 2-Critical BT1031945 DNS cache configured and tmm stuck in 'not ready' state indefinitely after TMM restart or reboot
994221-1 3-Major BT994221 ZoneRunner returns error 'Resolver returned no such record'
990929-2 3-Major BT990929 Status of GTM monitor instance is constantly flapping
987709-6 3-Major BT987709 Static target string as CNAME pool member might cause config load failure if wide IP with same name exists in another partition
977625-1 3-Major BT977625 GTM persistence records linger in tmm
973341-1 3-Major BT973341 Customized device certs will break scripts relying on /config/httpd/conf/ssl.crt/server.crt
969553-1 3-Major BT969553 A DNS Cache (or Network DNS Resolver) returns SERVFAIL to some queries.
967737-3 3-Major BT967737 DNS Express: SOA stops showing up in statistics from second zone transfer
966461-7 3-Major BT966461 Tmm memory leak
965053-4 3-Major BT965053 [Regression of ID787881 & ID761032] DNSX fails to sign zone transfer using tsig key after failure
958157-4 3-Major BT958157 Hash collisions in DNS rapid-response packet processing
936777-1 3-Major BT936777 Old local config is synced to other devices in the sync group.
936417-4 3-Major BT936417 DNS/GTM daemon big3d does not accept ECDH or DH ciphers
936361-2 3-Major BT936361 IPv6-based bind (named) views do not work
935945-2 3-Major BT935945 GTM HTTP/HTTPS monitors cannot be modified via GUI
920817-7 3-Major BT920817 Wide IP operations performed in quick succession result in missing resource records and out of sync journals.
918693-5 3-Major BT918693 Wide IP alias validation error during sync or config load
913917-1 3-Major BT913917 Unable to save UCS
911497-1 3-Major BT911497 Unbound's backoff algorithm interacts badly with net resolver iRules
911241-8 3-Major BT911241 The iqsyncer utility leaks memory for large bigip_gtm.conf file when log.gtm.level is set to debug
908829-2 3-Major BT908829 The iqsyncer utility may not write the core file for system signals
908801-2 3-Major BT908801 SELinux policies may prevent from iqsh/iqsyncer dumping core
903521-1 3-Major BT903521 TMM fails to sign responses from BIND when BIND has 'dnssec-enable no'
899253-1 3-Major BT899253 [GUI] GTM wideip-pool-manage in GUI fails when tens of thousands of pools exist
887921-2 3-Major BT887921 iRule command “RESOLVER::name_lookup” returns null for responses more than 512 bytes
795633-1 3-Major BT795633 GUI and REST API unable to add virtual servers containing a space in the name to a pool
779185-1 3-Major BT779185 Forward zone deleted when wideip updated
766593-7 3-Major BT766593 RESOLV::lookup with bytes array input does not work when length is exactly 4, 16, or 20
222220-8 3-Major K11931 Distributed application statistics are not passed correctly.
1205509-2 3-Major BT1205509 Region cache fails to update appropriately after referenced region update
1205061-2 3-Major BT1205061 DNSSEC keys removed from the configuration before expiration date when iQuery connection goes down
1200929-2 3-Major BT1200929 GTM configuration objects larger than 16384 bytes can cause the GTM sync process to hang
1191349-2 3-Major BT1191349 The dns_cache_derived_stat show corrupted values.
1189877-4 3-Major   The option /dev/random is depreciated from rndc-confgen with the latest BIND 9.16
1182353-3 3-Major BT1182353 DNS cache consumes more memory because of the accumulated mesh_states
1162221-2 3-Major BT1162221 Probing decision will skip local GTM upon reboot if net interface is not brought up soon enough
1162081-6 3-Major   Upgrade the bind package to fix security vulnerabilities
1161241-5 3-Major   BIND default behavior changed from 9.11 to 9.16
1142153-2 3-Major BT1142153 DNS Resource Records for Wide IPs are potentially misleading when creating or deleting a large number of Wide IPs
1137217-2 3-Major BT1137217 DNS profile fails to set TC flag for responses containing RRSIG algorithm 13
1133201-1 3-Major BT1133201 Disabling a GTM pool member results in the same virtual server no longer being monitored in other pools
1127805-2 3-Major BT1127805 Server.crt containing "<" will cause frequent reconnects between local gtmd and big3d
1124217-1 3-Major BT1124217 Big3d cores on CTCPSocket::TCPReceive and connector
1122497-4 3-Major BT1122497 Rapid response not functioning after configuration changes
1116513-1 3-Major BT1116513 Route-domains should not be allowed on name server addresses via the GUI.
1112089-1 3-Major BT1112089 Prevent zrd from rolling back named.conf file in wrong situations
1111361-3 3-Major BT1111361 Refreshing DNS wide IP pool statistics returns an error
1108557-1 3-Major BT1108557 DNS NOTIFY with TSIG is failing due to un-matched TSIG name
1108237-2 3-Major BT1108237 Incorrect 'No reply from big3d: timed out' result for certain destinations monitored by GTM.
1100197-2 3-Major BT1100197 GTM sends wrong commit_id originator for iqsyncer to do gtm group sync
1096165-4 3-Major BT1096165 Tmm cored for accessing the pool after the gtm_add command is run
1094069-1 3-Major BT1094069 iqsyncer will get stuck in a failed state when requesting a commit_id that is not on the target GTM
1083405-3 3-Major BT1083405 "Error connecting to named socket" from zrd
1082197-1 3-Major BT1082197 RNAME and MNAME field order reversed for Synthetic SOAs sent for negative response
1075469-1 3-Major BT1075469 DNS GUI: Refreshing a DNS Express record sometimes fails to populate the server.
1073677-1 3-Major BT1073677 Add a db variable to enable answering DNS requests before reqInitState Ready
1073673-1 3-Major BT1073673 Prevent possible early exit from persist sync
1070953-4 3-Major BT1070953 Dnssec zone transfer could cause numerous gtm sync events.
1067309-1 3-Major BT1067309 GTMD cored followed by TMM core SIGSEGV due to illegal GTM server reference.
1066397-1 3-Major BT1066397 GTM persists to last resort pool members even when primary pool members become available.
1064205-1 3-Major BT1064205 GSLB virtual server's status can't be changed from the drop-down selection box on its properties page.
1063829-1 3-Major BT1063829 Zxfrd could run out of memory because zone db files are not efficiently recycled.
1060145-1 3-Major BT1060145 Change of virtual IP from virtual-server-discovery leads to mcp validation error on slot 2.
1055077-1 3-Major BT1055077 Modifying the datacenter does not check GTM server configuration for prober-pool.
1051125-1 3-Major BT1051125 GTM marks virtual servers offline even when LTM virtual servers are available.
1050661-1 3-Major BT1050661 Warning message with UDP on DOH server side.
1048077 3-Major   SELinux errors with gtmd when using internal FIPS card
1044873-1 3-Major BT1044873 Deleted GTM link is not removed from virtual server object and causes load failure.
1041889-2 3-Major BT1041889 RRSIG missing for CNAME with RDATA in different zone
1041657-1 3-Major BT1041657 PEM and Analytics tabs are displayed when accessing DoH Proxy/Server profiles.
1041625-5 3-Major BT1041625 Virtual server flapping when the active and standby devices have different configuration.
1040153-1 3-Major BT1040153 Topology region returns narrowest scope netmask without matching
1030237-1 3-Major BT1030237 Zxfrd core and continual restart when out of configured space
1026621-1 3-Major BT1026621 DNS cache resolver could not connect to remote DNS server with snatpool if multiple routes exist
1024905-1 3-Major BT1024905 GTM monitor times out if monitoring a virtual server with translation address
1024553-1 3-Major BT1024553 GTM Pool member set to monitor type "none" results in big3d: timed out
1012061-1 3-Major BT1012061 Link Controller auto-discovery does not remove deleted virtual servers
1003233-2 3-Major BT1003233 SNMP Polling can cause inconsistencies in gtm link stats.
1001101-1 3-Major BT1001101 Cannot update/display GTM/DNS listener route advertisement correctly
996261-1 4-Minor BT996261 Zrd in restart loop with empty named.conf
995369-1 4-Minor BT995369 DNSSEC manual key created with other algorithms ends up using RSA/SHA1 algorithm
959613-1 4-Minor BT959613 SIP/HTTPS monitor attached to generic-host virtual server and pool shows 'blank' reason
947217-6 4-Minor BT947217 Fix of ID722682 prevents GTM config load when the virtual server name contains a colon
886145-1 4-Minor BT886145 The 'Reconnect' and 'Reconnect All' buttons do not work if reached via a particular section of the DNS GUI.
882933-1 4-Minor BT882933 Nslookup might generate a core during system restart
839361-7 4-Minor BT839361 iRule 'drop' command does not drop packets when used in DNS_RESPONSE
808913-1 4-Minor BT808913 Big3d cannot log the full XML buffer data
708680-4 4-Minor BT708680 TMUI is unable to change the Alias Address of DNS/GTM Monitors
464708-3 4-Minor BT464708 DNS logging does not support Splunk format log
1186789-2 4-Minor BT1186789 DNSSEC keys stored on an internal FIPS card do not work after upgrading to versions >= 16.x
1128405-3 4-Minor BT1128405 DNS overall Request/Second counter can be inaccurate
1125161-2 4-Minor BT1125161 Wideip fails to display or delete in the Link Controller GUI.
1121937-4 4-Minor BT1121937 ZoneRunner GUI is unable to display CAA records with "Property Value" set to ";"
1067821-1 4-Minor BT1067821 Stats allocated_used for region inside zxfrd is overflowed
1026813-7 4-Minor BT1026813 LCD IP address is missing from /etc/hosts on iSeries
1014761-2 4-Minor BT1014761 [DNS][GUI] Not able to enable/disable pool member from pool member property page
1008233-1 4-Minor BT1008233 The gtm_add command fails but reports no error
1122153-4 5-Cosmetic BT1122153 Zonerunner GUI displaying incorrect error string "RRSig Covers Unsupported Record Type"
1053605-2 5-Cosmetic BT1053605 When you use NAT, the iQuery status displays 'BIGIP' instead of 'BIGIP-DNS'.


Application Security Manager Issues

ID Number Severity Links to More Info Description
1105341-2 0-Unspecified BT1105341 Decode_application_payload can break exponent notation in JSON
923821-1 2-Critical BT923821 Captcha is not shown after successful CSI challenge when configured action is CSI followed by captcha in case of credential stuffing attack
887621-4 2-Critical BT887621 ASM virtual server names configuration CRC collision is possible
884945-1 2-Critical BT884945 Latency reduce in case of empty parameters.
850141-2 2-Critical BT850141 Possible tmm core when using Dosl7/Bot Defense profile
791669-5 2-Critical BT791669 TMM might crash when Bot Defense is configured for multiple domains
1113161-2 2-Critical BT1113161 After upgrade, Learning and Blocking Settings page is not loading because some policies are still pointing to deleted factory Negsig sets
1095185-2 2-Critical BT1095185 Failed Configuration Load on Secondary Slot After Device Group Sync
1050089-5 2-Critical   TMM crash in certain cases
987453-3 3-Major   Bot Defense browser verification fails upon iframes of different top-level domains
974985-6 3-Major BT974985 Dosl7/bot does not ignore non-http traffic even when disabled via iRule DOSL7::disable
974513-7 3-Major BT974513 Dropped requests are reported as blocked in Reporting/charts
966613-6 3-Major BT966613 Cannot create XML profile based on WSDL when wsdl contains empty soap:address – getting error ‘Column 'object_uri' cannot be null’
959965-1 3-Major   Asmlogd stops deleting old protobufs
959957-1 3-Major BT959957 Asmlogd stops deleting old protobufs
956373-4 3-Major BT956373 ASM sync files not cleaned up immediately after processing
950917-4 3-Major BT950917 Apply Policy fails due to internal signature overlap following ASU ASM-SignatureFile_20200917_175034
943441-4 3-Major BT943441 Issues in verification of Bot Defense with F5 Anti-Bot Mobile SDK
929077-4 3-Major BT929077 Bot Defense allow list does not apply when using default Route Domain and XFF header
928997-3 3-Major BT928997 Less XML memory allocated during ASM startup
903313-4 3-Major BT903313 OWASP page: File Types score in Broken Access Control category is always 0.
890169-4 3-Major BT890169 URLs starting with double slashes might not be loaded when using a Bot Defense Profile.
1216297-1 3-Major BT1216297 TMM core occurs when using disabling ASM of request_send event
1211905-2 3-Major BT1211905 Error occurs when importing ASM Policy in XML format with element "violation_ratings_counts"
1196537-1 3-Major BT1196537 BD process crashes when you use SMTP security profile
1195125 3-Major BT1195125 "Failed to allocate memory for nodes of size 0, no variables found in query" BD log message fix
1194173-2 3-Major   BIG-IP does not block the request when a parameter as a cookie has URL encoded base64 padding value
1190365-3 3-Major BT1190365 OpenAPI parameters with type:object/explode:true/style:form serialized incorrectly
1186401-2 3-Major BT1186401 Using REST API to change policy signature settings changes all the signatures.
1184841-2 3-Major   Header Based Content Profile is synced differently to peer unit in auto-sync mode, when updating URL through REST API
1173493-4 3-Major BT1173493 Bot signature staging timestamp corrupted after modifying the profile
1156889-3 3-Major BT1156889 TMM 'DoS Layer 7' memory leak during Bot Defense redirect actions
1148009-2 3-Major BT1148009 Cannot sync an ASM logging profile on a local-only VIP
1144497-2 3-Major   Base64 encoded metachars are not detected on HTTP headers
1141665-2 3-Major   Significant slowness in policy creation following Threat Campaign LU installation
1137993-2 3-Major BT1137993 Violation is not triggered on specific configuration
1136833-2 3-Major BT1136833 Unparseable request content subviolation override cannot be configured on microservices
1134441-2 3-Major BT1134441 Inactive policy synced to peer results ASM removed from virtual server only for sync-only DG
1132981-2 3-Major BT1132981 Standby not persisting manually added session tracking records
1132741-2 3-Major BT1132741 Tmm core when html parser scans endless html tag of size more then 50MB
1128689-2 3-Major BT1128689 Performance improvement in signature engine
1127809-2 3-Major   Due to incorrect URI parsing, the system does not extract the expected domain name
1126409-3 3-Major   BD process crash
1117245-2 3-Major BT1117245 Tomcat fails to write log messages into /var/log/tomcat/liveupdate.log file
1113881-2 3-Major   Headers without a space after the colon trigger an HTTP RFC violation
1112805-4 3-Major BT1112805 ip_address_intelligence field is not populated with value in ArcSight remote log when source IP is IPv4
1110281-2 3-Major BT1110281 Behavioral DoS does not ignore non-http traffic when disabled via iRule HTTP::disable and DOSL7::disable
1106937-3 3-Major   ASM may skip signature matching
1102301-2 3-Major   Content profiles created for types other than video and image allowing executable
1100669-3 3-Major BT1100669 Brute force captcha loop
1100393-2 3-Major BT1100393 Multiple Referer header raise false positive evasion violation
1099193-2 3-Major   Incorrect configuration for "Auto detect" parameter is shown after switching from other data types
1098609-4 3-Major   BD crash on specific scenario
1095041-2 3-Major BT1095041 ASM truncates cookies that contain a space in the name and TS cookie as part of cookie list.
1089853-2 3-Major   "Virtual Server" or "Bot Defense Profile" links in Request Details are not working
1085661-1 3-Major BT1085661 Standby system saves config and changes status after sync from peer
1081285-1 3-Major BT1081285 ASM::disable iRule command causes HTTP2 RST_STREAM response when MRF is enabled
1080613-1 3-Major BT1080613 LU configurations revert to default and installations roll back to genesis files
1078065-2 3-Major BT1078065 The login page shows blocking page instead of CAPTCHA or showing blocking page after resolving a CAPTCHA.
1072165-2 3-Major BT1072165 Threat_campaign_names and staged_threat_campaign_names fields are missing in ArcSight format
1069729-3 3-Major BT1069729 TMM might crash after a configuration change.
1069137-2 3-Major BT1069137 Missing AWAF sync diagnostics
1069113-1 3-Major BT1069113 ASM process watchdog should be less aggressive
1067589-3 3-Major BT1067589 Memory leak in nsyncd
1065681-1 3-Major BT1065681 Sensitive data is not masked under certain conditions.
1062105-3 3-Major BT1062105 For specific configurations (Auto-Added Signature Accuracy and Case Sensitive parent policy), child security policy fails to create.
1059513-1 3-Major BT1059513 Virtual servers may appear as detached from security policy when they are not.
1058597-5 3-Major BT1058597 Bd crash on first request after system recovery.
1057557-5 3-Major BT1057557 Exported policy has greater-than sign '>' not escaped to '&gt;' with response_html_code tag.
1051589-1 3-Major   Missing configuration after upgrade
1048949-1 3-Major BT1048949 TMM xdata leak on websocket connection with asm policy without websocket profile
1039361-1 3-Major BT1039361 [GraphQL] In case of more than one malformed violation, the first is reported multiple times
1036969-1 3-Major BT1036969 Chrome sometimes ignores cross-site bot-defense cookies
1033025-4 3-Major BT1033025 TMM might crash when unsupported bot iRule is used
1031461-2 3-Major   Session awareness entries aren't mirrored to both sides of an active-active deployment.
1029989-6 3-Major   CORS : default port of origin header is set 80, even when the protocol in the header is https
1029373-4 3-Major BT1029373 Firefox 88+ raising Suspicious browser violations with bot defense
1028493-1 3-Major BT1028493 Live Update genesis file for Server Technologies installation fails
1023889-3 3-Major BT1023889 HTTP/HTTPS protocol option in storage filter do not suppress WS/WSS server->client message
1023229-1 3-Major BT1023229 False negative on specific authentication header issue
1021609-1 3-Major BT1021609 Improve matching of URLs with specific characters to a policy.
1020149-4 3-Major BT1020149 Bot Defense does not support iOS's WKWebView framework
1017557-1 3-Major BT1017557 ASM Plugin Abort reset for chunked response without proper terminating 0 chunk followed by FIN
1017261-7 3-Major BT1017261 Configuraton update triggers from MCP to ASM are ignored
994013-1 4-Minor BT994013 Modifying bot defense allow list via replace-all-with fails with match-order error
991765-3 4-Minor BT991765 Inheritance of staging_period_in_days from policy template
984521-4 4-Minor BT984521 Accept-Encoding header is stripped by Bot Defense profile in case of incompatible file extension and a dot in the file name
984449-2 4-Minor BT984449 Unnecessary swagger validation violation may raise due to behavioral WAF parameter traps that have identical name
950953-3 4-Minor BT950953 Browser Challenges update file cannot be installed after upgrade
937541-4 4-Minor BT937541 Wrong display of signature references in violation details
882729-5 4-Minor BT882729 Applied Blocking Masks discrepancy between local/remote event log
807569-3 4-Minor BT807569 Requests fail to load when backend server overrides request cookies and Bot Defense is used
757486-2 4-Minor BT757486 Errors in IE11 console appearing with Bot Defense profile
1211437-2 4-Minor   When mobile cookie is too long, Anti-Bot SDK is failing
1210569-3 4-Minor BT1210569 User defined signature rule disappears when using high ASCII in rule
1210053-1 4-Minor BT1210053 The cred_stuffing_fail_open Internal Parameter does not cause Leaked Credential violation in case of expiration or error
1181833-2 4-Minor BT1181833 Content is not updating under respective tab of webUI when CSRF enabled
1154725-4 4-Minor   Custom or predefined method is not changing the behavior while changing from GET to POST method
1132925-3 4-Minor BT1132925 Bot defense does not work with DNS Resolvers configured under non-zero route domains
1132705-3 4-Minor BT1132705 Failed on insert entry to DCC.ACCOUNT_LOGIN_OBJECT_ATTRIBUTES
1123153-3 4-Minor   "Such URL does not exist in policy" error in the GUI
1120529-1 4-Minor BT1120529 Illegal internal request in multipart batch request
1113753-2 4-Minor   Signatures might not be detected when using truncated multipart requests
1111793-2 4-Minor BT1111793 New HTTP RFC Compliance check for incorrect newline separators between request line and first header
1108657-3 4-Minor   No notification about disabled "Virus detected" violation in case of enabling "Anti-Virus Protection"
1097853-1 4-Minor   Session Tracking screen may be missing the scroll bar after saving the configuration
1092965-2 4-Minor   Disabled "Illegal Base64 value" violation is detect for staged base64 parameter with attack signature in value
1087005-2 4-Minor BT1087005 Application charset may be ignored when using Bot Defense Browser Verification
1084857-2 4-Minor BT1084857 ASM::support_id iRule command does not display the 20th digit
1083513-1 4-Minor BT1083513 BD configuration for botdefense.disable_challenge_failure_reporting gets de-synced with mcpd
1076825-1 4-Minor BT1076825 "Installation of Automatically Downloaded Updates" configuration reverts to default after upgrade to v16.1.x from earlier releases.
1076165-1 4-Minor BT1076165 GRPC traffic does not work with DoSL7.
1067917-1 4-Minor BT1067917 Attaching iRule DOSL7::enable when mitigation is not enabled at dosl7 profile, it is not showing warning in GUI.
1059421-4 4-Minor   Bot Signature is not updated when the signature rule is updated.
1058665-1 4-Minor BT1058665 Bot signature with a semicolon followed by a space is not detected.
1057713-2 4-Minor   "South Sudan" is missing from the ASM Geolocation Enforcement list.
1048617-3 4-Minor   Nice level BigDB paramter is not applied for BD
1026277-6 4-Minor BT1026277 Apply Policy can get ignored in auto-sync setup, while importing/replacing several existing policies with policies that have Policy Builder enabled
1017149-1 4-Minor   User-defined bot sigs that are created in tmsh don't overlap staged factory bot sigs
1005309-4 4-Minor BT1005309 Additional Tcl variables showing information from the AntiBot Mobile SDK
1005181-4 4-Minor BT1005181 Bot Defense Logs indicate the mobile debugger is used even when it is not
1004801-2 4-Minor BT1004801 In the violation details for Max Parameter Protocol Compliance, the incorrect number of parameters is shown.
1003765-2 4-Minor BT1003765 Authorization header signature triggered even when explicitly disabled
1113333-3 5-Cosmetic   Change ArcSight Threat Campaign key names to be camelCase
1048989-2 5-Cosmetic   Slight correction of button titles in the Data Guard Protection Enforcement


Application Visibility and Reporting Issues

ID Number Severity Links to More Info Description
763349-4 2-Critical BT763349 AVRD can crash with core when HTTPS connection to BIG-IQ DCD node times out
949593-5 3-Major BT949593 Unable to load config if AVR widgets were created under '[All]' partition
939933-7 3-Major   Monpd restarts every few seconds due to missing of AVR database
933777-5 3-Major BT933777 Context use and syntax changes clarification
932485-5 3-Major BT932485 Incorrect sum(hits_count) value in aggregate tables
932189-1 3-Major BT932189 Incorrect BD Swap Size units on ASM Resources chart
869049-7 3-Major BT869049 Charts discrepancy in AVR reports
830073-7 3-Major BT830073 AVRD may core when restarting due to data collection device connection timeout
808801-6 3-Major BT808801 AVRD crash when configured to send data externally
743826-7 3-Major BT743826 Incorrect error message: "Can't find pool []: Pool was not found" even though Pool member is defined with port any(0)
1211817 3-Major BT1211817 AVRD may crash while modifying the global settings
1111189-2 3-Major BT1111189 Listing errors in tmsh and installation failures when the configuration includes an AVR scheduled-report.
950305-5 4-Minor BT950305 Analytics data not displayed for Pool Names
915005-3 4-Minor BT915005 AVR core files have unclear names
910777-1 4-Minor BT910777 Sending ASM report via AWS SES failed duo to wrong content type
930217-1 5-Cosmetic BT930217 Zone colors in ASM swap usage graph are incorrect


Access Policy Manager Issues

ID Number Severity Links to More Info Description
349706-4 0-Unspecified   NetworkAccess assigns 1.1.1.1 address to remote ppp endpoint APM VPN
965837-4 2-Critical BT965837 When BIG-IP is configured with PingAccess profile, tmm can core when there is an active connection
930625-1 2-Critical BT930625 TMM crash is seen due to double free in SAML flow
831737-3 2-Critical BT831737 Memory Leak when using Ping Access profile
1111149-2 2-Critical BT1111149 Nlad core observed due to ERR_func_error_string can return NULL
1110489-3 2-Critical BT1110489 TMM crash in nexthop_release with ACCESS_ACL_ALLOWED iRule event
1106757-3 2-Critical   Horizon VDI clients are intermittently disconnected
1083053-2 2-Critical BT1083053 Apmd memory grows over time in AD auth scenarios
1082581-2 2-Critical   Apmd sees large memory growth due to CRLDP Cache handling
1063653 2-Critical BT1063653 TMM Crash while processing traffic on virtual server.
1063261-4 2-Critical BT1063261 TMM crash is seen due to sso_config objects.
1046633-1 2-Critical BT1046633 Rare tmm crash when sending packets to apmd fails
1007869-1 2-Critical BT1007869 Upgrade from v14.1.x to v15.1.2.1 or later fails for app-tunnel, RDP and config migration
984765-2 3-Major BT984765 APM NTLM auth fails every week with RPC return code 0xC0000022(STATUS_ACCESS_DENIED)
967185 3-Major BT967185 Increase the size limit of JWT for OAuth
958773-2 3-Major BT958773 [SAML SP] Assertion canonicalization fails if <AttributeValue> contains spaces.
956645-4 3-Major BT956645 Per-request policy execution may timeout.
949477-4 3-Major BT949477 NTLM RPC exception: Failed to verify checksum of the packet
947613-2 3-Major BT947613 APM reset after upgrade and modify of LDAP Group Lookup
934825-2 3-Major BT934825 Restarting MCPD via command line may not restart the aced process
903573-3 3-Major BT903573 AD group cache query performance
903501-3 3-Major BT903501 VPN Tunnel establishment fails with some ipv6 address
898381-3 3-Major BT898381 Changing the setting of apm-forwarding-fastl4 profile does not take effect
868557-1 3-Major BT868557 Unable to initiate SWG database download from Admin UI when management network has no direct internet connectivity.
819645-1 3-Major BT819645 Reset Horizon View application does not work when accessing through F5 APM
796065-2 3-Major BT796065 PingAccess filter can accumulate connections increasing memory use.
752077-4 3-Major BT752077 Kerberos replay cache leaks file descriptors
527119-9 3-Major BT527119 An iframe document body might be null after iframe creation in rewritten document.
1211369-1 3-Major BT1211369 [Validation] Do not allow AD/LDAP object pointing to the same IP:PORT
1211361-1 3-Major BT1211361 Validate AD/LDAP object names
1210025-1 3-Major BT1210025 Address list discovery task does not trigger apply access policy automatically
1208949-1 3-Major BT1208949 TMM cored with SIGSEGV at 'vpn_idle_timer_callback'
1205029 3-Major BT1205029 WEBSSO with an OAuth Bearer token and the Cache option enabled cached tokens from a diff per-session context are flowed to the backend application
1196401-2 3-Major   Restarting TMM does not restart APM Daemon
1194745 3-Major BT1194745 The multi-thread use case in LDAP cache reads APMD crash
1191045 3-Major BT1191045 AD/LDAP queue processing is stuck and being asserted by the session cleaner
1173669-1 3-Major   Unable to reach backend server with Per Request policy and Per Session together
1167985-2 3-Major BT1167985 Network Access resource settings validation errors
1166937-1 3-Major BT1166937 The path_match is missing in RCL path when path_match string is "Any String"
1166449-2 3-Major BT1166449 APM - NTLM authentication will stop working if any of DC FQDN is not resolvable in the configured DC list
1145989-2 3-Major BT1145989 ID token sub-session variables are not populated
1144353 3-Major BT1144353 After creating a "Dynamic Exclude Address Spaces" or "Dynamic LAN Address Spaces" from inside a Network Access List object fails to redirect back to Network Access List object page
1136905-1 3-Major BT1136905 Request for Portal Access Hosted Content are RST with "No available SNAT addr"
1124793-1 3-Major BT1124793 Space inserted for variable assigned in a custom expression in the GUI
1113661-1 3-Major BT1113661 When OAuth profile is attached to access policy, iRule event in VPE breaks the evaluation
1108109-4 3-Major BT1108109 APM policy sync fails when access policy contains customization images
1101321-3 3-Major BT1101321 APM log files are flooded after a client connection fails.
1100549-3 3-Major BT1100549 "Resource Administrator" role cannot change ACL order
1099305-2 3-Major BT1099305 Nlad core observed due to ERR_func_error_string can return NULL
1095909-1 3-Major BT1095909 DEBUG_NOTICE macro truncating log messages of size more than 1024
1091509-3 3-Major BT1091509 SAML Artifact resolution service fails to resolve artifacts on same IP after reboot
1089685-1 3-Major BT1089685 [APM]Webtop loading issue when 'oneconnect' profile is attached to a virtual server
1089293 3-Major BT1089293 Backend password reset is not working in Webtop when sso is disabled.
1089101-2 3-Major BT1089101 Apply Access Policy notification in UI after auto discovery
1071021-1 3-Major BT1071021 Some URLs such as *cdn.onenote.net configured in the Office 365 dynamic address space are not processed by APM
1070029-1 3-Major BT1070029 GSS-SPNEGO SASL mechanism issue with AD Query to Synology Directory Service
1064001-1 3-Major BT1064001 POST request to a virtual server with stream profile and a access policy is aborted.
1058873 3-Major BT1058873 Configuring Source Address as "address list" in a virtual server causes apmd to restart.
1054677-1 3-Major BT1054677 Ng_export fails for users with the 'pager' option enabled in their 'cli preference' configuration.
1050165 3-Major BT1050165 APM - users end up with SSO disabled for their session, admin intervention required to clear session
1046401-2 3-Major BT1046401 APM logs shows truncated OCSP URL path while performing OCSP Authentication.
1042505-1 3-Major BT1042505 Session variable "session.user.agent" does not get populated for edge clients
1041989-4 3-Major BT1041989 APM Portal Access does not add automatically the / after the URL encoded (after the '$$'), Redirect breaks
1039941-3 3-Major BT1039941 [WIN]Webtop offers to download f5vpn when it is already installed
1037877-3 3-Major BT1037877 OAuth Claim display order incorrect in VPE
1022877-3 3-Major BT1022877 Ping missing from list of Types for OAuth Client
1018877-2 3-Major BT1018877 Subsession variable values mixing between sessions
1013729-2 3-Major BT1013729 Changing User login password using VMware View Horizon client results in “HTTP error 500”
1010961-1 3-Major BT1010961 Redirect fails when accessing SAML Resource more than once in SAML IDP initiated Flow
1010809-3 3-Major BT1010809 Connection is reset when sending a HTTP HEAD request to APM Virtual Server
1006509-1 3-Major BT1006509 TMM memory leak
1002413-2 3-Major BT1002413 Websso puts quotation marks around non-string claim type 'custom' values
1000669-4 3-Major BT1000669 Tmm memory leak 'string cache' leading to SIGFPE
996985-1 4-Minor BT996985 No IP address format validation while adding IP addresses in IPv4 LAN Address Space or IPv4 Exclude Address Space when configuring Network Access Resource.
996977-1 4-Minor BT996977 No IP address format validation while adding IP addresses in IPv6 LAN Address Space or IPv6 Exclude Address Space when configuring Network Access Resource.
547947-2 4-Minor BT547947 Feeding empty username and password to the Logon Page followed by RadiusAuthAgent shows the session as Logged out
1195385 4-Minor BT1195385 OAuth Scope Internal Validation fails upon multiple providers with same type
1088389-2 4-Minor BT1088389 Admin to define the AD Query/LDAP Query page-size globally
1079441-2 4-Minor BT1079441 APMD leaks memory in underlying LDAP/AD cyrus/krb5 libraries
1050153 4-Minor BT1050153 Unknown browscap value sent by the client.
1050009-2 4-Minor BT1050009 Access encountered error:ERR_NOT_FOUND. File: <file name> messages in 'acs_cmp_acp_req_handler' function in APM logs
1041985-1 4-Minor BT1041985 TMM memory utilization increases after upgrade
1040829-4 4-Minor BT1040829 Errno=(Invalid cross-device link) after SCF merge
1028081-1 4-Minor BT1028081 [F5 Access Android] F5 access in android gets "function () {[native code]}" in logon page
1022973-2 4-Minor BT1022973 Sessiondb entries related to Oauth module not cleaned up in certain conditions
1004845-1 4-Minor BT1004845 Accessing attribute using attributeNode value does not work with Portal Access
427094-1 5-Cosmetic BT427094 Accept-language is not respected if there is no session context for page requested.


WebAccelerator Issues

ID Number Severity Links to More Info Description
941961-4 3-Major BT941961 Upgrading system using WAM TCP profiles may prevent the configuration from loading


Service Provider Issues

ID Number Severity Links to More Info Description
1141853-2 2-Critical BT1141853 SIP MRF ALG can lead to a TMM core
917637-5 3-Major BT917637 Tmm crash with ICAP filter
1189513-4 3-Major BT1189513 Media flow pinholes are not created if SDP MIME multipart body part miss the content-length header
1167941-3 3-Major   CGNAT SIP ALG INVITE loops between BIG-IP and Server
1156149-1 3-Major BT1156149 Early responses on standby may cause TMM to crash
1058905-1 3-Major BT1058905 TMM crash as a result of "LB::detach" in an iRule on an MR HTTP configuration.
1038057-4 3-Major BT1038057 Unable to add a serverssl profile into a virtual server containing a FIX profile
1008169-1 3-Major BT1008169 BIG-IP systems disconnect the DIAMETER transport connection if it receives an answer message without a Result-Code AVP
1184629-2 4-Minor   Validate content length with respective to SIP header offset instead of parser offset
1116941-1 4-Minor   Need larger Content-Length value supported for SIP


Advanced Firewall Manager Issues

ID Number Severity Links to More Info Description
1053589-1 1-Blocking BT1053589 DDoS functionality cannot be configured at a Zone level
1013353-1 1-Blocking BT1013353 ICMP flood or ICMP/IP/IPv6 fragment vectors are not hardware mitigated when configured on VS
1136917-1 2-Critical   TMM crashed when dos-profile (with BDOS and White-list enabled) disassociated from Virtual Server.
1106273-3 2-Critical BT1106273 "duplicate priming" assert in IPSECALG
1084133-1 2-Critical BT1084133 At device level ICMP frags are not counting for BA and BD
1080957-4 2-Critical BT1080957 TMM Seg fault while Offloading virtual server DOS attack to HW
1069809 2-Critical BT1069809 AFM rules with ipi-category src do not match traffic after failover.
1067405-3 2-Critical BT1067405 TMM crash while offloading / programming bad actor connections to hardware.
1060833-2 2-Critical BT1060833 After handling a large number of connections with firewall rules that log or report translation fields or server side statistics, TMM may crash.
1058645-2 2-Critical BT1058645 ipsecalg blocks Sophos ISAKMP negotiation during tunnel setup.
1048425-4 2-Critical BT1048425 Packet tester crashes TMM when vlan external source-checking is enabled
1040685-4 2-Critical BT1040685 Core file on blade slot2 after reboot (TMM SIGSEGV in pktclass_classifier)
997429-1 3-Major BT997429 When (DoS Detection threshold = DoS Mitigation threshold) for a vector, logging is erratic when hardware offload is enabled
993269-3 3-Major BT993269 DoS timestamp cookies are incompatible with FastL4 TCP timestamp rewrite option
992233-1 3-Major BT992233 DNS DoS profile (Error Vector) does not mitigate/detect at the virtual server level.
987637-3 3-Major BT987637 DDoS: Single endpoint flood vectors and Bad destination not supported properly on Neuron hardware
987605-3 3-Major BT987605 DDoS: ICMP attacks are not hardware-mitigated
977449-1 3-Major BT977449 Total address and Total endpoints is shown as '0' in nat stats
968953-1 3-Major BT968953 Unnecessary authorization header added in the response for an IP intelligence feed list request
965849-1 3-Major BT965849 Displayed 'Route Domain ID' value is confusing if it is set to None
952521-1 3-Major BT952521 Memory allocation error while creating an address list with a large range of IPv6 addresses
935769-5 3-Major BT935769 Upgrading / Rebooting BIG-IP with huge address-list configuration takes a long time
929913-3 3-Major BT929913 External DNS logging does not differentiate between: all src_IP, Per-SrcIP and Per-DstIP events
926549-3 3-Major BT926549 AFM rule loops when 'Send to Virtual' is used with Virtual Server iRule 'LB::reselect'
1216573 3-Major BT1216573 AFM Learning Domain issue when trying with many valid domains
1209409-3 3-Major BT1209409 Address lists with thousands of addresses can cause MCPD to become unresponsive and use 100% CPU
1199025-2 3-Major BT1199025 DNS vectors auto-threshold events are not seen in webUI
1196053-3 3-Major BT1196053 The autodosd log file is not truncating when it rotates
1137133-2 3-Major   Stats rate is showing incorrect data for broadcast, multicast and arp flood vectors
1132449-2 3-Major BT1132449 Incomplete or missing IPv6 IPI database results to connection reset and/or high TMM CPU usage
1127117-1 3-Major BT1127117 High Memory consumption for NAT translations of NAPT/PBA End Point Independent modes
1121521-2 3-Major BT1121521 Libssh upgrade from v0.7.7 to v0.9.6
1112781 3-Major BT1112781 DNS query drops on Virtual Edition platform if the packet size is above 1500 for NAPTR record.
1101653-2 3-Major BT1101653 Query Type Filter in DNS Security Profile blocks allowed query types
1079985-3 3-Major BT1079985 int_drops_rate shows an incorrect value
1078625 3-Major BT1078625 TMM crashes during DoS processing
1076477-2 3-Major BT1076477 AFM allows deletion of a firewall policy even if it's being used in a route domain.
1070737-2 3-Major BT1070737 AFM does not detect NXDOMAIN attack at virtual context when DNS cache is activated.
1070033-2 3-Major BT1070033 Virtual server may not fully enter hardware SYN Cookie mode.
1069321-2 3-Major BT1069321 High iowait and pgstat wait every hour on the hour, due to excessive logging in autodosd.out
1047933-1 3-Major BT1047933 Virtual server security policy - An error has occurred while trying to process your request
1045065-3 3-Major BT1045065 Enable traffic group modification in source-translation object
1032329-1 3-Major BT1032329 A user with low privileges cannot open the Rule List editor.
1031909-2 3-Major BT1031909 NAT policies page unusable due to the page load time
1022613-1 3-Major BT1022613 Cannot modify Security "global-network" Logging Profile
1020061-3 3-Major BT1020061 Nested address lists can increase configuration load time
1019557-1 3-Major BT1019557 Bdosd does not create /var/bdosd/*.json
1019453-1 3-Major BT1019453 Core generated for autodosd daemon when synchronization process is terminated
1012413-1 3-Major BT1012413 Tmm performance impact for DDoS vector on virtual server when hardware mitigation is enabled
981145-1 4-Minor BT981145 DoS events do not include the attack name for "tcp syn ack flood"
967245-1 4-Minor   Incorrect SPVA counter incremented during Sweep attack on profile
926425-4 4-Minor BT926425 Hardware SYN Cookies may not deactivate after the SYN attack ends and valid TCP traffic starts
837101-3 4-Minor BT837101 AVR and BIG-IQ stats show N/A bar for Source IP and domain name on DNS query packet
760355-4 4-Minor BT760355 Firewall rule to block ICMP/DHCP from 'required' to 'default'
1215401-1 4-Minor   Under Shared Objects, some country names are not available to select in the Address List
1211021-4 4-Minor   Enforcement does not happen for entries in new and modified IPI feed lists due to lock issues
1167953-2 4-Minor BT1167953 Issue with UI, while opening rule name in Packet Tester to check the rule for the drop reason
1162661-3 4-Minor   The Bad Actor (BA) hit counter is not updating for ICMP vector during hardware mitigation
1144417 4-Minor BT1144417 DoS WL allowed in BIG-IP version 16.1.x if it was configured in a previous version 15.1.x
1123189-2 4-Minor BT1123189 De-Provisioning AFM does not disable SYN-ACK cookie generation
1084901-1 4-Minor BT1084901 Updating the firewall rule list for IPv6 with route domain throws an error in the GUI, works from tmsh
1063681-2 4-Minor BT1063681 PCCD cored, SIGSEGV in pc::cfg::CMessageProcessor::modify_fqdn.
1033021-2 4-Minor BT1033021 UI: Partition does not work when clicking through security zones
1022213-4 4-Minor   DDOS: BDOS: Warning messages related to high availability (HA) watchdog seen on system bring up
1003377-3 4-Minor BT1003377 Disabling DoS TCP SYN-ACK does not clear suspicious event count option


Policy Enforcement Manager Issues

ID Number Severity Links to More Info Description
1159397-1 1-Blocking BT1159397 The high utilization of memory when blade turns offline results in core
829657-5 2-Critical BT829657 Possible TMM crash with a multi-IP PEM subscriber configured with more than 16 IP addresses
1186925-4 2-Critical BT1186925 When FUA in CCA-i, PEM does not send CCR-u for other rating-groups
1095989-1 2-Critical BT1095989 PEM behaviour on receiving CCA with result code: 4012 and FUA on the Gy interface
1019481-1 2-Critical BT1019481 Unable to provision PEM on VELOS platform
924589-3 3-Major BT924589 PEM ephemeral listeners with source-address-translation may not count subscriber data
829653-1 3-Major BT829653 Memory leak due to session context not freed
1207381-3 3-Major BT1207381 PEM policy: configuration update of a rule flow filter with 'source port' or 'destination port' of '0' (ANY) is ignored
1174085-1 3-Major BT1174085 spmdb_session_hash_entry_delete releases the hash's reference
1174033-2 3-Major BT1174033 The UPDATE EVENT is triggered with faulty session_info and resulting in core
1108681-4 3-Major BT1108681 PEM queries with filters return error message when a blade is offline
1093357-4 3-Major BT1093357 PEM intra-session mirroring can lead to a crash
1089829-3 3-Major BT1089829 PEM A112 15.1.5.0.69.10 - Constant SIGSEGV cores on both peers
1020041-3 3-Major   "Can't process event 16, err: ERR_NOT_FOUND" seen in tmm logs
1015501-3 3-Major BT1015501 Changes to DHCP Profile are not used by tmm


Carrier-Grade NAT Issues

ID Number Severity Links to More Info Description
751719-5 2-Critical BT751719 UDP::hold/UDP::release does not work correctly
994985-3 3-Major BT994985 CGNAT GUI shows blank page when applying SIP profile
1183877-2 3-Major BT1183877 CGNAT related links are unavailable in Statistics section
1096317-4 3-Major BT1096317 SIP msg alg zombie flows
1023461-2 3-Major BT1023461 Multiple entries for CGNAT when PBA pools allocation is defined: for each request, a new entry is created
1128429-5 4-Minor BT1128429 Rebooting one or more blades at different times may cause traffic imbalance results High CPU
1034009-4 4-Minor BT1034009 CGNAT+Subscriber Discovery - NAT IP with wrong route domain on the CGNAT Log


Fraud Protection Services Issues

ID Number Severity Links to More Info Description
1075545 3-Major BT1075545 Changing the datasyncd activation-epoch results in high CPU usage for 24 hours
1060393-1 3-Major BT1060393 Extended high CPU usage caused by JavaScript Obfuscator.
1016481-1 3-Major BT1016481 Special JSON characters in Dom Signatures breaks configuration


Anomaly Detection Services Issues

ID Number Severity Links to More Info Description
1211297-3 2-Critical   Handling DoS profiles created dynamically using iRule and L7Policy
1060057-2 3-Major BT1060057 Enable or Disable APM dynamically with Bados generates APM error
1046469-1 3-Major BT1046469 Memory leak during large attack
1010717-1 3-Major BT1010717 Default DoS profile creation from tmsh is incorrectly interpreted by DoS profile GUI


Traffic Classification Engine Issues

ID Number Severity Links to More Info Description
984657 3-Major BT984657 Sysdb variable not working from tmsh
1184853 3-Major   Youtube video not classified in the BIG-IP version 16.1.0
1161965-3 3-Major BT1161965 File descriptor(fd) and shared memory leak in wr_urldbd
1058349-3 3-Major   Requirement of new signatures to detect IMO and Google Duo service.
974205-5 4-Minor BT974205 Unconstrained wr_urldbd size causing box to OOM
941773-1 4-Minor BT941773 Video resolution mis-prediction
941765-1 4-Minor BT941765 Video resolution mis-predictions
1168137-3 4-Minor   PEM Classification Auto-Update for month is working as hourly
1167889 4-Minor   PEM classification signature scheduled updates do not complete
1144329-4 4-Minor BT1144329 Traffic Intel does not classify Microsoft app properly
1117297-1 4-Minor BT1117297 Wr_urldbd continuously crashes and restarts
1103245 4-Minor BT1103245 Policies not being applied


Device Management Issues

ID Number Severity Links to More Info Description
663754-1 2-Critical BT663754 Modifying the default management port can break internal functionality
996129-3 3-Major BT996129 The /var partition is full as cleanup of files on secondary is not executing
880565-5 3-Major BT880565 Audit Log: "cmd_data=list cm device recursive" is been generated continuously
717174-5 3-Major BT717174 WebUI shows error: Error getting auth token from login provider
1196477-3 3-Major BT1196477 Request timeout in restnoded
999085-1 4-Minor BT999085 REST endpoint registration errors in restjavad logs
1049237-1 4-Minor BT1049237 Restjavad may fail to cleanup ucs file handles even with ID767613 fix
1041113 4-Minor BT1041113 BIG-IP Admin role credentials are not usable for getting device discovered by BIG-IQ


iApp Technology Issues

ID Number Severity Links to More Info Description
889605-2 3-Major BT889605 iApp with Bot profile is unavailable if application folder includes a subpath
842193-6 3-Major BT842193 Scriptd coring while running f5.automated_backup script
1091505 3-Major BT1091505 In AGC 8.0 you cannot choose from existing SSL profiles
1004697-3 3-Major BT1004697 Saving UCS files can fail if /var runs out of space


Protocol Inspection Issues

ID Number Severity Links to More Info Description
989529-1 3-Major BT989529 AFM IPS engine takes action on unspecified services
1013777-4 3-Major BT1013777 An error is encountered when enabling reset-learning to all the signatures of a protocol inspection profile in the GUI.
1011133 3-Major BT1011133 Protocol Inspection compliance check 10208 gtp_disallowed_message_types does not take GTP version into account
1182305-2 4-Minor BT1182305 Descriptions requested for IPS IDs
1098837-1 4-Minor BT1098837 Configuration failure due to the DB validation exception happening in the ips_inspection_sig and ips_inspection_compl tables
1135073-3 5-Cosmetic   IPS signature update webUI warning message "An active subscription is required to access certain inspections" is always enabled


Guided Configuration Issues

ID Number Severity Links to More Info Description
991829-1 3-Major BT991829 Continuous connection refused errors in restjavad
982801-2 3-Major BT982801 AGC hardening


In-tmm monitors Issues

ID Number Severity Links to More Info Description
1107549-2 2-Critical BT1107549 In-TMM TCP monitor memory leak
1110241-2 3-Major BT1110241 in-tmm http(s) monitor accumulates unchecked memory
1046917-4 3-Major BT1046917 In-TMM monitors do not work after TMM crashes
1019261-1 3-Major BT1019261 In-TMM HTTPS monitor with SSL Profile set to None does not use serverssl profile.
1002345-4 3-Major BT1002345 Transparent DNS monitor does not work after upgrade
788257-5 4-Minor BT788257 Bigd.mgmtroutecheck setting ignored by in-tmm monitors after bigstart restart


SSL Orchestrator Issues

ID Number Severity Links to More Info Description
922737-1 2-Critical BT922737 TMM crash
1104037-2 2-Critical BT1104037 Tmm crash after changing "connection.vlankeyed" to disabled on system with L2 wire
1095145-3 4-Minor BT1095145 Virtual server responding with ICMP unreachable after using /Common/service

 

Known Issue details for BIG-IP v16.1.x

999709-6 : iRule 'pool'/'virtual' commands not triggered in CLIENT_ACCEPTED with HTTP/2.

Links to More Info: BT999709

Component: Local Traffic Manager

Symptoms:
The 'pool'/'virtual' iRule commands cause the specified pool to be used directly. However, with HTTP/2, the 'pool'/'virtual' command may fail to execute within the CLIENT_ACCEPTED event. This results in no traffic being sent.

Conditions:
-- A 'pool'/'virtual' command is used under CLIENT_ACCEPTED event.
-- An HTTP/2 profile applied to virtual server.
-- The HTTP/2 protocol in use.
-- HTTP/2 Message Routing is disabled.

Impact:
With HTTP/2 configured, the iRule 'pool'/'virtual' commands fail to execute within the CLIENT_ACCEPTED event, causing no traffic to be sent to the desired pool/virtual.

Workaround:
As a workaround, you may use HTTP_REQUEST event instead of CLIENT_ACCEPTED in iRule syntax.


999669-1 : Some HTTPS monitors are failing after upgrade when config has different SSL option

Links to More Info: BT999669

Component: Local Traffic Manager

Symptoms:
Some HTTPS monitors are failing after upgrade when the config has different SSL option properties for different monitors.

Conditions:
-- Individual SSL profiles exist for different HTTPS monitors with SSL parameters.
-- A unique server SSL profile is configured for each HTTP monitor (one with cert/key, one without).

Impact:
Some HTTPS monitors fail. Pool is down. Virtual server is down.

Workaround:
None


999085-1 : REST endpoint registration errors in restjavad logs

Links to More Info: BT999085

Component: Device Management

Symptoms:
Errors are logged to /var/log/restjavad.0.log at the SEVERE log level:

[SEVERE]... [IcrWorker] Unable to register iControl endpoint "/xxxx/xxxx". Error: uriPath '/tm/xxxx/xxxx' already registered

Conditions:
The system reports these errors during startup of the restjavad service because of multiple registrations of the same endpoint.

Impact:
There is no functional impact and these errors can be ignored.

Workaround:
None


999021-2 : IPsec IKEv1 tunnels fail after a config sync from Standby to Active

Links to More Info: BT999021

Component: TMOS

Symptoms:
When racoon (the IKEv1 daemon) sees a tunnel config change, which occurs due to a config sync from the standby device, the change causes tmm and racoon to have conflicting views on the state of that tunnel.

If the IKEv1 tunnel is up at the time of the config change, tmm fails to restart the tunnel.

Conditions:
-- IPsec IKEv1 tunnel in use.
-- Changes made to IPsec IKEv1 tunnel on the Standby BIG-IP device, which are then sync'd to the Active BIG-IP device.
-- And/or a full config sync from the Standby to Active BIG-IP system.

Impact:
IPsec IKEv1 tunnels fail and do not start again.

Workaround:
-- Do not make changes to IPsec IKEv1 tunnels on the Standby device.

-- Avoid full syncs from Standby to Active.

How to recover when the problem occurs:

-- Disable the affected ike-peer and re-enable it.


998957-1 : MCPD consumes excessive CPU while collecting statistics

Links to More Info: BT998957

Component: TMOS

Symptoms:
MCPD CPU utilization is 100%.

Conditions:
This condition can occur when the BIG-IP system has a large number of virtual servers, pools, and pool members for which statistics are being collected. The CPU impact is proportional to the number of objects configured. It appears unlikely to see a significant impact when under 1000 objects.

Impact:
CPU utilization by MCPD is excessive.

Workaround:
None


998649-1 : Hostnames that contain a period are logged incorrectly

Links to More Info: BT998649

Component: TMOS

Symptoms:
Sylog-ng uses the hostname (machine name) and truncates it starting at the first '.' (period). This results in hostnames that contain a period being logged incorrectly (for example, 'my.hostname' is logged as 'my' by syslog-ng).
Additionally, hostnames are being truncated in bootmarker logs and the ltm, apm, apm, ipsec, saas, and fw_log that are sourced from TMM.

Three sub-bugs BZ1076909, BZ1076921, BZ1080317 are created and BZ998649 is the base bug for tracking the above three issues.

Conditions:
Hostname contains a period '.' (For example 'my.hostname').

Impact:
Some logs that go directly to syslog-ng use a truncated hostname. Logs sourced from TMM uses truncated hostname.

Workaround:
None.


998253-4 : SNI configuration is not sent via HTTPS when in-tmm monitors are disabled

Links to More Info: BT998253

Component: Local Traffic Manager

Symptoms:
The Server Name Indication (SNI) extension is missing on the HTTPS handshake.

Conditions:
-- Global in-tmm monitors are disabled
-- HTTPS monitor traffic

Impact:
The HTTPS client-server handshake occurs without a TLS SNI.

Workaround:
None


998225-6 : TMM crash when disabling/re-enabling a blade that triggers a primary blade transition.

Links to More Info: BT998225

Component: TMOS

Symptoms:
TMM crashes during the primary blade transition.

Conditions:
-- Using bidirectional forwarding detection.
-- Primary blade transition occurs.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


997793-3 : Error log: Failed to reset strict operations; disconnecting from mcpd

Links to More Info: K34172543, BT997793

Component: TMOS

Symptoms:
After rebooting the device you are unable to access the GUI. When checking the ltm logs in the SSH / console, it repeatedly prompts an error: tmm crash

Failed to reset strict operations; disconnecting from mcpd.

Conditions:
-- APM provisioned.
-- Previous EPSEC packages that are still residing on the system from earlier BIG-IP versions is installing upon boot.

Impact:
Mcpd fails to fully load and the device fails to come up fully, and it cannot pass traffic.

An internal timer might cause the installation to be aborted and all daemons to be restarted via 'bigstart restart. Traffic disrupted while tmm restarts.

Workaround:
You can recover by restarting the services. Traffic will be disrupted while tmm restarts:

1. Stop the overdog daemon first by issuing the command:
   systemctl stop overdog

2. Restart all services by issuing the command:
   bigstart restart

3. Wait for 10 to 20 mins until EPSEC packages are successfully installed and mcpd successfully starts.


997561-5 : TMM CPU imbalance with GRE/TB and GRE/MPLS traffic

Links to More Info: BT997561

Component: TMOS

Symptoms:
When handling unidirectional GRE traffic, a lack of inner payload entropy can lead to CPU pinning.

In some circumstances, handling this traffic should not require maintaining state across TMMs.

Conditions:
This occurs with GRE/TB (transparent ethernet bridging) and GRE/MPLS traffic.

Impact:
TMM utilization across CPUs is imbalanced, which can impact overall device performance.

Workaround:
None


997541-5 : Round-robin GRE Disaggregator for hardware and software

Links to More Info: BT997541

Component: TMOS

Symptoms:
GRE tunnel traffic is pinned to one CPU.

Conditions:
GRE traffic is passed through BIG-IP system.

Impact:
Traffic is pinned to one CPU and overall performance is degraded.

Workaround:
None


997429-1 : When (DoS Detection threshold = DoS Mitigation threshold) for a vector, logging is erratic when hardware offload is enabled

Links to More Info: BT997429

Component: Advanced Firewall Manager

Symptoms:
Some DoS-related log messages may be missing

Conditions:
-- Static DDoS vector is configured with the same mitigation threshold and detection threshold setpoint.
-- The platform supports Hardware DDoS mitigation and hardware mitigation and hardware mitigation is not disabled.

Impact:
Applications dependent on log frequency may be impacted.

Workaround:
Configure the mitigation limit about 10% over the attack limit.


997357-1 : iRule command "SSL:session invalidate" not working as expected

Links to More Info: BT997357

Component: Local Traffic Manager

Symptoms:
The iRule command "SSL:session invalidate" allows session resumption to happen. Session resumption not supposed to occur when this iRule command is used in an iRule.

Conditions:
"SSL:session invalidate" is used in the iRule event HTTP_REQUEST

Impact:
Session resumption would happen where the iRule is used with "SSL:session invalidate" included which is not supposed to occur

Workaround:
Session resumption should be disabled in SSL profiles


996985-1 : No IP address format validation while adding IP addresses in IPv4 LAN Address Space or IPv4 Exclude Address Space when configuring Network Access Resource.

Links to More Info: BT996985

Component: Access Policy Manager

Symptoms:
IP address format is not properly validated for IPv4 LAN Address Space and IPv4 Exclude Address Space fields which may lead to misconfiguration when IPv6 addresses are configured in this fields.

Conditions:
This can occur if you misconfigure the IPv4 LAN Address Space or IPv4 Exclude Address Space fields by adding IPv6 addresses while configuring Network Access Resource.

Impact:
This may cause the split tunnel to malfunction.

Workaround:
Correct the configuration by removing IPv6 Addresses in IPv4 LAN Address Space or IPv4 Exclude Address Space.


996977-1 : No IP address format validation while adding IP addresses in IPv6 LAN Address Space or IPv6 Exclude Address Space when configuring Network Access Resource.

Links to More Info: BT996977

Component: Access Policy Manager

Symptoms:
IP address format is not properly validated for IPv6 LAN Address Space and IPv6 Exclude Address Space fields which may lead to misconfiguration when IPv4 addresses are configured in this fields.

Conditions:
This can occur if you misconfigure the IPv6 LAN Address Space or IPv6 Exclude Address Space fields by adding IPv4 addresses while configuring Network Access Resource.

Impact:
This may cause the split tunnel to misfunction.

Workaround:
Correct the configuration by removing IPv4 Addresses in IPv6 LAN Address Space or IPv6 Exclude Address Space.


996649-6 : Improper handling of DHCP flows leading to orphaned server-side connections

Links to More Info: BT996649

Component: Local Traffic Manager

Symptoms:
When there are multiple client-side flows tied to a single server-side DHCP flow, timeout handling on the client-side flows is incorrect and might lead to a server-side flow getting orphaned. This results in traffic from the server not making its way back to the client.

Conditions:
Regular DHCP virtual server in use.

Impact:
Traffic is not passed to the client.

Workaround:
None.


996261-1 : Zrd in restart loop with empty named.conf

Links to More Info: BT996261

Component: Global Traffic Manager (DNS)

Symptoms:
The zrd process enters a restart loop:
logger[20015]: Re-starting zrd

Conditions:
This occurs when /var/named/config/named.conf is empty.

Impact:
The zrd process enters a restart loop. If the device is in a sync group, zrd enters a restart loop on all devices.

Workaround:
Restore content to the named.conf file.


996145-1 : After UCS restore on HA pair, one of the devices is missing folder /var/config/rest/iapps/f5-iappslx-ssl-orchestrator

Links to More Info: BT996145

Component: TMOS

Symptoms:
After restoring via UCS file, the SSL Orchestrator page reads:

Not Found
The requested URL was not found on this server

Conditions:
-- Devices are in a high availability (HA) pair
-- SSL Orchestrator deployed
-- A UCS file is loaded

Impact:
SSL Orchestrator is not available.

/var/config/rest/iapps/f5-iappslx-ssl-orchestrator is not restored correctly during UCS load.

Workaround:
Restore the UCS file again


996129-3 : The /var partition is full as cleanup of files on secondary is not executing

Links to More Info: BT996129

Component: Device Management

Symptoms:
The system does not boot because the /var partition is full.

Conditions:
This can be seen on vCMP devices.

Impact:
The partition housing /var/config/ may become 100% full, impacting future disk IO operation and it may cause unexpected traffic disruption.

Workaround:
None


995849-1 : Tmm crash SIGSEGV - rcs_getsalen() in lib/rc_net.c

Links to More Info: BT995849

Component: TMOS

Symptoms:
Tmm crashes while processing a large number of tunnels.

Conditions:
-- A large number of ipsec tunnels

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


995605-2 : PVA accelerated traffic does not update route domain stats

Links to More Info: BT995605

Component: TMOS

Symptoms:
PVA accelerated traffic does not update route domain stats

Conditions:
-- PVA accelerated traffic.
-- Viewing the route domain stats.

Impact:
The route domain stats may be inaccurate

Workaround:
Use the virtual server stats or ifc_stats instead.


995369-1 : DNSSEC manual key created with other algorithms ends up using RSA/SHA1 algorithm

Links to More Info: BT995369

Component: Global Traffic Manager (DNS)

Symptoms:
Generated DNSSEC keys always use RSA/SHA1 algorithm.

Conditions:
DNSSEC keys are generated with manual key management method.

Impact:
You are unable to create DNSSEC keys with other algorithms.

Workaround:
Choose automatic key management method.


995097-1 : Certain management-dhcp supersede options fail to restore correctly when the configuration is reloaded from a file.

Links to More Info: BT995097

Component: TMOS

Symptoms:
After reloading the configuration from a file, management-dhcp supersede options whose values contained a double quote character (") no longer contain the character.

For instance, after reloading the configuration, the following section:

# tmsh list sys management-dhcp sys-mgmt-dhcp-config supersede-options
sys management-dhcp sys-mgmt-dhcp-config {
    supersede-options {
        domain-name {
            value { "example.com" }
        }
        domain-name-servers {
            value { 8.8.8.8 }
        }
        domain-search {
            value { "example.com" }
        }
    }
}

Becomes:

# tmsh list sys management-dhcp sys-mgmt-dhcp-config supersede-options
sys management-dhcp sys-mgmt-dhcp-config {
    supersede-options {
        domain-name {
            value { example.com }
        }
        domain-name-servers {
            value { 8.8.8.8 }
        }
        domain-search {
            value { example.com }
        }
    }
}

This also affects the configuration file for the dhclient/dhclient6 daemons that the system automatically generates from the aforementioned config stanza.

Conditions:
This issue occurs when the following statements apply:
--- The values of management-dhcp supersede options contain double quote characters.
--- The configuration is reloaded from file.

The BIG-IP system reloads the configuration from file in the following cases:
-- When you issue the 'tmsh load sys config' command.
-- After an upgrade, as the mcpd binary database does not exist yet.
-- When troubleshooting requires removing the mcpd binary database and reloading the config from file.
-- When the system is relicensed.
-- When system provisioning changes.
-- When a UCS/SCF archive is restored.
-- When someone merges in config from file or terminal (but this is limited to the actual contents being merged in, not the entire configuration).

Impact:
The in-memory mcpd configuration relating to management-dhcp supersede options is incorrect.

The /etc/dhclient.conf file that is automatically generated contains incorrect syntax.

As a result of this, the dhclient/dhclient6 daemons fail to parse the file and run with an incomplete configuration.

Ultimately, the system does not behave as configured in regard to its management-dhcp configuration.

Workaround:
Reapply the desired management-dhcp supersede-options configuration using the tmsh utility.

For example, to restore the intended in-memory configuration shown under Symptoms, you would run within tmsh:

# modify sys management-dhcp sys-mgmt-dhcp-config supersede-options none
# modify sys management-dhcp sys-mgmt-dhcp-config supersede-options add { domain-search { value add { \"example.com\" } } }
# modify sys management-dhcp sys-mgmt-dhcp-config supersede-options add { domain-name { value add { \"example.com\" } } }
# modify sys management-dhcp sys-mgmt-dhcp-config supersede-options add { domain-name-servers { value add { 8.8.8.8 } } }
# save sys config

On versions earlier than 15.0.0, you must also restart the dhclient/dhclient6 daemons by running:

bigstart restart dhclient dhclient6

Note that the workaround is not permanent and will be invalidated the next time the config is loaded from file again.


994985-3 : CGNAT GUI shows blank page when applying SIP profile

Links to More Info: BT994985

Component: Carrier-Grade NAT

Symptoms:
The virtual server properties GUI page shows blank when a SIP profile is applied to the virtual server.

Conditions:
-- Create virtual server and attach a SIP profile.
-- Navigate to virtual server properties page.

Impact:
The virtual server properties page does not display the configuration.

Workaround:
None.


994365-1 : Inconsistency in tmsh 'object mode' for some configurations

Links to More Info: BT994365

Component: TMOS

Symptoms:
Tmsh does not support object mode when modifying certain configurations, such as the node configuration. This results in misleading error 'not found' even though the configuration is available.

Conditions:
Modify node config results in error, even though the config is present.

# Node Object 'example' is created successfully
(tmos)# create ltm node example address 1.2.3.4

# On modifying the node 'example', tmsh gives error
(tmos)# modify ltm node example
      Data Input Error: node "example" not found

The modify command does work when a property is specified:
(tmos)# modify ltm node example description "Node 1234"

Impact:
Inconsistent tmsh syntax when using 'object mode' for modifying the configuration.

Workaround:
Use 'tmsh modify' commands, or the GUI, to make the required changes without 'entering' the object in tmsh.


994361-2 : Updatecheck script hangs/Multiple updatecheck processes

Links to More Info: BT994361

Component: TMOS

Symptoms:
Multiple updatecheck and 'rpm -qf' processes running simultaneously.

Updatecheck is not functional

Conditions:
Updatecheck is run periodically via a cronjob. Updatecheck runs 'rpm -qf' command.

Impact:
Due to that 'rpm -qf' command hangs. This causes multiple updatecheck and 'rpm -qf' processes. High CPU and memory usage.

The most likely explanation is that rpmdb has gotten corrupted.

Workaround:
To rebuild rpmdb:

1. Halt all running updatecheck and 'rpm -qf' processes.

2. Run these commands:
rm /var/lib/rpm/__db*
rpm --rebuilddb


994221-1 : ZoneRunner returns error 'Resolver returned no such record'

Links to More Info: BT994221

Component: Global Traffic Manager (DNS)

Symptoms:
ZoneRunner returns error 'Resolver returned no such record'.

Conditions:
When trying to retrieve TXT records with single backslash.

Impact:
Not able to manage TXT record.

Workaround:
Use double backslashes to retrieve TXT records.


994081-1 : Traffic may be dropped with an Immediate idle timeout setting

Links to More Info: BT994081

Component: Local Traffic Manager

Symptoms:
When the idle timeout is set to Immediate, flows may be expired while packets are buffered. Buffered packets are dropped. This can impact iRules and non-standard L4 virtual servers.

Conditions:
-- idle timeout set to Immediate.
-- iRules are configured
-- performance l4, ip forwarding, l2 forwarding virtual servers are used.
-- debug tmm is in use

Impact:
Traffic is dropped.

Workaround:
You can use either workaround:

-- Configure a standard L4 virtual server.

-- Consider removing iRules.


994033-3 : The daemon httpd_sam does not recover automatically when terminated

Links to More Info: BT994033

Component: TMOS

Symptoms:
APM policy redirecting users to incorrect domain, the httpd_sam daemon not running.

Conditions:
Daemon httpd_sam stopped with the terminate command.

Impact:
APM policy performing incorrect redirects.

Workaround:
Restart the daemons httpd_apm and httpd_sam.


994013-1 : Modifying bot defense allow list via replace-all-with fails with match-order error

Links to More Info: BT994013

Component: Application Security Manager

Symptoms:
An error occurs when modifying the allow list (or in case of 'load sys config verify' with similar configuration):

01b90026:3: Bot defense profile (/Common/bot-defense-device-id-generate-before-access) error: match-order should be unique.

Conditions:
-- Either modification via replace-all-with:
tmsh modify security bot-defense profile bot-defense-device-id-generate-before-access whitelist replace-all-with { first_1 { match-order 1 source-address 10.0.0.0/8 url /foo } second_2 { match-order 2 source-address ::/32 url /bar } }

-- Or delete all, add, save and load-verify:
tmsh modify security bot-defense profile bot-defense-device-id-generate-before-access whitelist delete { all }
tmsh modify security bot-defense profile bot-defense-device-id-generate-before-access whitelist add { first_1 { match-order 1 source-address 10.0.0.0/8 url /foo } second_2 {match-order 2 source-address ::/32 url /bar}}
tmsh save sys config
load sys config verify

Impact:
You are unable to add-replace the bot defense allow list configuration

Workaround:
You can use either of the following workarounds:

-- Change match-order of defaults in profile_base.conf to use match-order 3 and up (and load config).
-- Change match-order of custom modify command (to continue with match-order 3 and up).


993481-1 : Jumbo frame issue with DPDK eNIC

Links to More Info: BT993481

Component: TMOS

Symptoms:
TMM crashes

Conditions:
-- TMM is using DPDK driver with Cisco eNIC
-- TMM receives jumbo sized packet

Impact:
Traffic disrupted while TMM restarts.

Workaround:
- Use a different driver such as sock.
- Do not use or accept jumbo frames, use the following TMSH command to set the MTU to less than or equal to 1500:
tmsh modify net vlan external mtu 1500


993269-3 : DoS timestamp cookies are incompatible with FastL4 TCP timestamp rewrite option

Links to More Info: BT993269

Component: Advanced Firewall Manager

Symptoms:
Using DoS timestamp cookies together with a FastL4 profile with the timestamp rewrite option enabled might lead to traffic failures.

DoS timestamp cookies might also lead to problems with traffic generated by the Linux host.

Conditions:
-- DoS timestamp cookies are enabled, and either of the following:

-- FastL4 profile with the timestamp rewrite option enabled.
-- Traffic originating from Linux host.

Impact:
Traffic is dropped due to incorrect timestamps.

Workaround:
Disable timestamp cookies on the affected VLAN.


992813-7 : The list of dhcp-options known to mcpd is outdated, leading to the inability to instantiate certain management-dhcp configurations.

Links to More Info: BT992813

Component: TMOS

Symptoms:
The mcpd daemon performs validation of the request-options and supersede-options a BIG-IP administrator specifies via the tmos.sys.management-dhcp endpoint in tmsh.

As the list of dhcp-options known to mcpd is outdated, it is possible you may be returned an error when attempting to configure valid request-options or supersede-options.

For example, you may be returned the following error when attempting to supersede the domain-search option:

01071627:3: Management Dhcp resource supersede-option - Invalid dhcp option: domain-search

Conditions:
You attempt to configure a dhcp-option unknown to mcpd as part of the request-options or supersede-options properties.

Note: A common dhcp-option of which mcpd has no knowledge is domain-search. You are unlikely to experience this issue unless you are requesting or superseding this particular dhcp-option.

Impact:
You are unable to instantiate the desired management-dhcp configuration.

Workaround:
None


992449-1 : The vCMP host does not report the correct number of guest CPUs on the guest page of the GUI

Links to More Info: BT992449

Component: TMOS

Symptoms:
The total number of cores for a multi-slot vCMP guest is not shown correctly on the GUI page for a vCMP guest.

Conditions:
-- vCMP Host on VIPRION platforms with multiple blades.
-- vCMP guest spanning two or more blades.

Impact:
Incorrect number of cores listed.

-- The vCMP :: Guest List page shows all cores for all slots.
-- The vCMP -> Guest List specific_guest page shows only cores for that guest's slot.

Workaround:
View the Guest List page to see a graphical representation of the number of cores per guest.


992253-4 : Cannot specify IPv6 management IP addresses using GUI

Links to More Info: BT992253

Component: TMOS

Symptoms:
You are unable to set the IPv6 mgmt IP address using the GUI, even if the IPv6 address format is a not a short address. When you submit the change, the field is empty.

Conditions:
Attempt to set up IPv6 management address using the GUI

Impact:
You are unable to configure IPv6 management addresses using the GUI.

Workaround:
Use tmsh:

tmsh create sys management-ip <address>/<netmask>
tmsh create sys management-route default-inet6 <address>


992241-3 : Unable to change initial admin password from GUI after root password change

Links to More Info: BT992241

Component: TMOS

Symptoms:
While trying to change the admin password from GUI, an error occurs:
-- Authentication failed: Password expired. Update password via /mgmt/shared/authz/users.

Conditions:
-- Change the password for the root user the first time, before the admin password has been changed. This action sets both the root and admin password at the same time.

-- Navigate to the GUI and attempt to update the admin password.

Impact:
GUI password change fails.

Workaround:
You can use either of the following workarounds:

-- Change the password admin via the GUI before changing the root admin via ssh.

-- After changing the root password, use tmsh to set the admin password using the command:

modify auth user admin password.


992233-1 : DNS DoS profile (Error Vector) does not mitigate/detect at the virtual server level.

Links to More Info: BT992233

Component: Advanced Firewall Manager

Symptoms:
The GUI makes it appear as if the DNS malformed vector can be configured at the virtual server level when it cannot be.

Conditions:
Using the GUI to configure DoS vectors in the virtual server context.

Impact:
The GUI allows you configure something that does not actually work.

Workaround:
None


992053-4 : Pva_stats for server side connections do not update for redirected flows

Links to More Info: BT992053

Component: TMOS

Symptoms:
Pva_stats for server side connections do not update for the re-directed flows

Conditions:
-- Flows that are redirected to TMM.
-- Server flows are offloaded to PVA.

Impact:
PVA stats do not reflect the offloaded flow.

Workaround:
None


991829-1 : Continuous connection refused errors in restjavad

Links to More Info: BT991829

Component: Guided Configuration

Symptoms:
Continuous connection refused errors observed in restjavad.

[com.f5.rest.workers..AsmConfigWorker] nanoTime:[879945045679087] threadId:[63] Exception:[org.apache.thrift.transport.TTransportException: java.net.ConnectException: Connection refused (Connection refused)

[8100/tm/asm/owasp/task OWASPTaskScheduleWorker] Unexptected exception in getting all the polcies: org.apache.thrift.transport.TTransportException: java.net.ConnectException: Connection refused (Connection refused)

Conditions:
The errors are observed regardless of asm provisioning

Impact:
This causes noisy log file of restjavad.

Workaround:
None


991765-3 : Inheritance of staging_period_in_days from policy template

Links to More Info: BT991765

Component: Application Security Manager

Symptoms:
Enforcement readiness period of newly created Policy does not get its value from Policy Template.

Conditions:
Creating new ASM Policy from a template with an Enforcement readiness period different from the default (default is 7).

Impact:
Newly created policy has an incorrect configuration.

Workaround:
Create the Policy using tmsh or REST API.


991265-3 : Persistence entries point to the wrong servers for longer periods of time

Links to More Info: BT991265

Component: Local Traffic Manager

Symptoms:
Persistence entries point to the wrong servers for a longer than expected.

Conditions:
A pool member goes down, causing the persistence entry to change to a new pool member. Then, the pool member comes back up.

Impact:
The persistence entry does not change to the pool member that came back up. It does not expire as client requests using this cookie continue to refresh the persistence entry that goes to the wrong server.

This can delay recovery of the pool members when they are marked down for regular maintenance, or if all pool members are cycled up/down periodically, it causes persistence entries to point to the wrong servers for longer periods of time than necessary.

Workaround:
None.


990929-2 : Status of GTM monitor instance is constantly flapping

Links to More Info: BT990929

Component: Global Traffic Manager (DNS)

Symptoms:
Status of GTM monitor instance is constantly flapping.

Conditions:
GTM devices in a GTM sync group configured with IP addresses that can not communicate with each other.

Impact:
Resources are marked offline constantly.

Workaround:
Remove from the GTM server object definition the IP addresses that do not communicate with each other.


990853-1 : Mcpd restarts on Secondary VIPRION blades upon modifying a vCMP guest's management IP address or gateway.

Links to More Info: BT990853

Component: TMOS

Symptoms:
The mcpd daemon restarts on all secondary VIPRION blades after logging error messages similar to the following example to the /var/log/ltm file:

-- err mcpd[6250]: 0107098a:3: The ip address (10.10.10.3%1) for a VCMP Mgmt IP in partition () references a route domain (1) in a different partition (part1). Objects may only reference objects in the same or the 'Common' partition
-- err mcpd[6250]: 01070734:3: Configuration error: Configuration from primary failed validation: 0107098a:3: The ip address (10.10.10.3%1) for a VCMP Mgmt IP in partition () references a route domain (1) in a different partition (part1). Objects may only reference objects in the same or the 'Common' partition... failed validation with error 17238410.

Conditions:
-- Multi-blade VIPRION system provisioned as vCMP host.
-- The system is configured with partitions using non-default route-domains.
-- Using the GUI, an Administrator attempts to modify the management IP address or management gateway of a vCMP guest.
-- A non-Common partition is selected in the GUI Partition drop-down menu when making the change.

Impact:
MCPD restarts, causing all other daemons on the blade to restart as well. The vCMP guests running on the affected blades suffer an outage and are unable to process traffic while the daemons restart.

Workaround:
Ensure that when you make management IP address or gateway changes to a vCMP guest, you do so while the Common partition is selected in the GUI.


990173-1 : Dynconfd repeatedly sends the same mcp message to mcpd

Links to More Info: BT990173

Component: Local Traffic Manager

Symptoms:
If dynconfd sends a single message to mcpd containing two or more operations, and one of the operations fails mcpd validation, dynconfd repeatedly sends same message to mcpd.

An example of two operations in one mcp message would be an ephemeral node creation and an ephemeral pool member creation in a single mcp message.

Conditions:
This can occur when:

-- Using FQDN nodes and FQDN pool members.

-- There is an additional issue where the message from dynconfd fails validation within mcpd (e.g., a misconfiguration in which the monitor assigned to the pool is configured with a wildcard destination and the pool member is added to the pool with a port of '0' or 'any'.

Impact:
By repeatedly resending the same messages, which fail repeatedly, dynconfd causes increased mcpd CPU utilization.

This might cause the population of ephemeral nodes and pool members to fail and become out of sync with what the DNS server is resolving.

Workaround:
Examine the LTM logs for mcpd error messages indicating failed attempts to create ephemeral nodes or ephemeral pool members, and resolve the cause of the failed node or pool-member creation.


989937-2 : Device Trust Certificates Expiring after 2038-01-19 show date of 1969

Links to More Info: BT989937

Component: TMOS

Symptoms:
If you import a Certificate into the Device Trust Certificates that expires after 2038-01-19, the system GUI shows an expiration date of 1969.

Conditions:
Certificate expiring on/after 2038-01-19T03:14:08Z.

Impact:
The expiration date in the GUI shows 1969. This does not impact iquery or device function.

Workaround:
You can use the command line interface to view the certificate:

$ cd /config/big3d
$ openssl crl2pkcs7 -nocrl -certfile client.crt | openssl pkcs7 -print_certs -noout -text | grep "Issuer:\|Subject:\|Not Before:\|Not After :"


989529-1 : AFM IPS engine takes action on unspecified services

Links to More Info: BT989529

Component: Protocol Inspection

Symptoms:
Specific ports configured in the IPS profile are not taken into account during the matching action exercised by the IPS subsystem. As a result, all ports are matched.

Conditions:
Service ports specified under Security :: Protocol Security : Inspection Profiles :: service type (e.g., HTTP).

Impact:
Increased resource usage and excessive logging.

Workaround:
None.


988745-4 : On reboot, 'could not find platform object' errors may be seen in /var/log/ltm

Links to More Info: BT988745

Component: TMOS

Symptoms:
During a reboot, several error messages are logged in /var/log/ltm:

-- err mcpd[9401]: 01070710:3: Database error (0), get_platform_obj: could not find platform object - sys/validation/Platform.cpp, line 188.

-- err chmand[6578]: 012a0003:3: hal_mcp_process_error: result_code=0x1070710 for result_operation=eom result_type=eom

Conditions:
This occurs when either of the following conditions is met:
-- A fresh installation of a BIG-IP system.
-- A reboot after forcing the mcpd process to reload the BIG-IP configuration,

Impact:
There is no functional impact to these error messages.

Workaround:
None.


988645-4 : Traffic may be affected after tmm is aborted and restarted

Links to More Info: BT988645

Component: TMOS

Symptoms:
Traffic may be affected after tmm is aborted and restarted.
/var/log/tmm contains a lot of "DAG Proxy failed" messages.

Conditions:
-- A BIG-IP device is deployed in a VELOS tenant
-- Tmm aborts and restarts for some reason.

Impact:
Traffic disrupted while tmm restarts. Traffic may be disrupted even after tmm has restarted.

Workaround:
Reboot the tenant


987949-2 : Error message during boot up

Links to More Info: BT987949

Component: TMOS

Symptoms:
Error messages are found in /var/log/ltm:

Could not retrieve DB variable for (provision.datastor): status 0xff00
Write F5 license shared memory device failed err = -5
Dossier data not available from hypervisor.
Database error (0), get_platform_obj: could not find platform object - sys/validation/Platform.cpp, line 188.
hal_mcp_process_error: result_code=0x1070710 for result_operation=eom result_type=eom
Setting /sys/kernel/debug/x86/ibpb_enabled failed. Request ibpb=0 ignored
Blade 2 turned RED: Quorum: perfect time sync, high availability (HA) TABLE offline
Device error: init Cannot get pci config register data for device 00:0e:00
do_grpc_call_to_platform: Bad return code from gRPC call to platform: 12 GRPC Message ddos:GlobalVectorPriorityRequest unsupported

Conditions:
Upgrade BIG-IP software to version 14.1.4.

Impact:
The error message is logged after the first boot after the upgrade. There is no impact on functionality and the error message can be ignored.

Workaround:
None


987709-6 : Static target string as CNAME pool member might cause config load failure if wide IP with same name exists in another partition

Links to More Info: BT987709

Component: Global Traffic Manager (DNS)

Symptoms:
GTM config fails to load with errors similar to this:

01070726:3: Pool 5 /Common/cnamepool1 in partition Common cannot reference GTM wideip pool member 5 /Common/cnamepool1 gslb.mycompany.com /App2/gslb.mycompany.com 1 in partition App2
Unexpected Error: Loading configuration process failed

Conditions:
There is a wide IP with the same name in another partition as the static target CNAME pool member.

Impact:
Gtm config fails to load.

Workaround:
Create the wide IP first and then add the static target CNAME pool member.


987637-3 : DDoS: Single endpoint flood vectors and Bad destination not supported properly on Neuron hardware

Links to More Info: BT987637

Component: Advanced Firewall Manager

Symptoms:
BIG-IP systems mitigate traffic on all of the IP addresses in an address list when certain DoS vectors are detected on a virtual server.

Conditions:
-- BIG-IP hardware platform equipped with Neuron (BIG-IP iSeries)
-- Virtual server configured with a DoS profile
-- Flood traffic reaches the virtual server

Impact:
For Neuron-supported hardware, virtual servers with subnet destinations are not properly mitigated when flood vectors are detected.

Workaround:
None


987605-3 : DDoS: ICMP attacks are not hardware-mitigated

Links to More Info: BT987605

Component: Advanced Firewall Manager

Symptoms:
ICMP/Fragments attacks against a virtual server with a DOS profile are not mitigated by hardware.

Conditions:
ICMP/Fragments attacks mitigation/detection is configured on a virtual system with neuron-capable hardware.

Impact:
ICMP/Fragments attacks mitigation/detection is handled in software. A large volume of attack traffic can spike the tmm CPU.

Workaround:
None


987453-3 : Bot Defense browser verification fails upon iframes of different top-level domains

Component: Application Security Manager

Symptoms:
When using Bot Defense on a page which has an iframe to a different top-level domain, the iframe may fail to load.

Conditions:
Page has an iframe on a different top-level domain than that of the main page. Note that iframes with different sub-domains are not impacted.

Impact:
Page resources may fail to load.

Workaround:
None


987401-1 : Increased TMM memory usage on standby unit after pool flap

Links to More Info: BT987401

Component: Local Traffic Manager

Symptoms:
TMM memory usage on a BIG-IP standby device might be substantially higher than an active device.

Conditions:
Standby device with UDP mirroring traffic and datagram-load-balancing disabled.

Impact:
The standby device may not be able to take over traffic when failover happens.

Workaround:
None.


987301-3 : Software install on vCMP guest via block-device may fail with error 'reason unknown'

Links to More Info: BT987301

Component: TMOS

Symptoms:
When installing an engineering hotfix (EHF) on a vCMP guest via block-device, sometimes it fails with 'reason unknown'.

-- /var/log/liveinstall may contain an error similar to:

I/O error : Input/output error
/tmp/lind_util.voCQOs/BIGIP1610/install/fsinfo.xml:1: parser error : Document is empty

-- /var/log/kern.log may contain an error similar to:

Aug 14 14:15:54 bigip1 info kernel: attempt to access beyond end of device
Aug 14 14:15:54 bigip1 info kernel: sr0: rw=0, want=3560560, limit=312712

Conditions:
This might occur after multiple attempts to install an EHF on a vCMP guest via block-device:

 tmsh install sys software block-device-hotfix Hotfix-BIGIP-14.1.2.6.0.77.2-ENG.iso volume HD1.3

Impact:
Sometimes the EHF installation fails on the guest.

Workaround:
-- Retry the software installation.
-- If the software installation continues to fail, copy the ISO images into the vCMP guest, and use those to perform the installation.


987081-1 : Alarm LED remains active on Secondary blades even after LCD alerts are cleared

Links to More Info: BT987081

Component: TMOS

Symptoms:
When a condition occurs which causes an alert message to be logged to the LCD display for a VIPRION chassis, the Alarm LED on the blade where the condition was reported may be set (to solid or flashing amber or red) according to the severity of the reported condition.

When the LCD alert messages are cleared, the Alarm LED on the Primary blade in the chassis will be cleared (or set according to remaining alert messages if only a subset of messages are cleared).

However, the Alarm LED on the Secondary blades in the chassis will not be cleared, and will continue to indicate the highest severity of the previously reported alert messages.

Conditions:
This occurs when:
-- A condition is reported by a Secondary blade in the chassis which causes its Alarm LED to be set (to solid or flashing amber or red) and a message logged to the chassis LCD display.
-- The LCD alert messages are cleared, such as by issuing the 'tmsh reset-stats sys alert lcd' command.

Impact:
The Alarm LED on one or more Secondary blades in the chassis continues to indicate an alert condition even after the previously reported alert messages have been cleared.

Workaround:
To restore the Secondary blade LEDs to their proper state, restart the fpdd daemon on each affected blade.

For example, if the Alarm LED is not reset on the blade in slot 4, issue one of the following commands from the console of the Primary blade in the chassis:
-- clsh --slot=4 "bigstart restart fpdd"
-- ssh slot4 "bigstart restart fpdd"

Alternately, you may log in to the console of the affected blade and issue the 'bigstart restart fpdd' command directly.


986821-1 : Command 'run util bash' event is not captured in log when initially executed

Links to More Info: BT986821

Component: TMOS

Symptoms:
The initiation of 'run util bash' is not captured in the audit log (/var/log/audit)

Conditions:
Run 'run util bash' command in tmsh mode.

Impact:
The timestamp for a 'run util bash' command will occur when the subshell exits, not when the subshell is first executed. It is difficult to determine when the bash subshell started.

Workaround:
None


985925-3 : Ipv6 Routing Header processing not compatible as per Segments Left value.

Links to More Info: BT985925

Component: Local Traffic Manager

Symptoms:
Packet should forward the packet with the route header unmodified when Segments Left is 0 (zero). It performs as expected when Segments Left is non-zero by dropping the packet and sending an ICMP error.

Conditions:
-- An IPv6 packet whose Next Header in IP header is Routing Header IPv6.
-- In the Routing Header IPv6 header, the Type field is 0.
-- In the Routing Header IPv6 header, the Segment Left field is 0.

Impact:
With Next Header field in IP header being Routing Header for IPv6, BIG-IP system fails to forward the ICMPv6 Echo Request packet to server, rather, it drops the packet.

Workaround:
None


985749-1 : TCP exponential backoff algorithm does not comply with RFC 6298

Links to More Info: BT985749

Component: Local Traffic Manager

Symptoms:
The algorithms used for TCP exponential backoff are different for SYN and non-SYN packets.

Conditions:
Using TCP.

Impact:
Retransmission timeout interval depends on the inclusion/exclusion of SYN flag.

Workaround:
None


985401-1 : ProxySSL virtual servers should work with web acceleration (ramcache) profiles attached

Links to More Info: BT985401

Component: Local Traffic Manager

Symptoms:
Attempting to attach a web acceleration profile to a virtual server that has an SSL profile with ProxySSL enabled will result in the following validation error:

A validation error similar to:

01070734:3: Configuration error: Proxy SSL is not compatible with Web Acceleration profile on Virtual Server (<virtual server name>).

Conditions:
-- Virtual server using an SSL profile with ProxySSL enabled.
-- Attaching a web acceleration (webacceleration) profile to the virtual server.

Impact:
Unable to use the web acceleration profile with ProxySSL virtual servers.

Workaround:
Avoid using ProxySSL virtual servers with web acceleration (ramcache) profiles attached.


984897-1 : Some connections performing SSL mirroring are not handled correctly by the Standby unit.

Links to More Info: BT984897

Component: Local Traffic Manager

Symptoms:
Some of the connections performing SSL mirroring do not advance through TCP states as they should on the Standby unit.

Additionally, these connections do not get removed from the connection table of the Standby unit when the connections close. Instead, they linger on until the idle timeout expires.

Conditions:
A virtual server configured to perform SSL connection mirroring.

Impact:
Should the units fail over, some connections may not survive as expected.

Additionally, given a sufficient load and a long idle timeout, this could cause unnecessary TMM memory utilization on the Standby unit.

Workaround:
None.


984765-2 : APM NTLM auth fails every week with RPC return code 0xC0000022(STATUS_ACCESS_DENIED)

Links to More Info: BT984765

Component: Access Policy Manager

Symptoms:
NTLM User logon authentication fails every week with RPC return code 0xC0000022(STATUS_ACCESS_DENIED) from the Active Directory (AD) server.

Conditions:
-- Upgrading from legacy versions to BIG-IP v14.1.2 or later.
-- AD servers are updated with latest security patches from Microsoft.

Impact:
NTLM Authentication fails after a week. APM end user client logon (such as Outlook users, Remote Desktop Users, and Browser-based NTLM Auth logons that use BIG-IP APM as forward/reverse proxy) fails, and the service is down.

Workaround:
To resolve the issue temporarily, use either of the following:

-- Reset the NTLM Machine Account with the 'Renew Machine Password' option.

-- Run the command:
bigstart restart nlad

The problem can reappear after a week, so you must repeat these steps each time the issue occurs.


984657 : Sysdb variable not working from tmsh

Links to More Info: BT984657

Component: Traffic Classification Engine

Symptoms:
When cloud_only system db variable is enabled, urlcat_query returns categorization from webroot from tmsh

Conditions:
The following sys db variable is enabled: cloud_only

You attempt to run the following command:

tmsh list sys db urlcat_query

Impact:
Sysdb variables does not work from tmsh


984521-4 : Accept-Encoding header is stripped by Bot Defense profile in case of incompatible file extension and a dot in the file name

Links to More Info: BT984521

Component: Application Security Manager

Symptoms:
Bot Defense profile checks if a page is not an HTML page by checking the file extension (among other ways).

In case the filename contains a dot (.) - the parsing is wrong and it is not detected as incompatible. As a result, the Accept-Encoding header is removed (to allow injection in the response).

Conditions:
-- Bot Defense profile is attached to s virtual server configured with any response injection (Device ID, Browser Verification, or Single Page Application).
Request is sent to an incompatible file extension (one of gif,png,bmp,jpg,ico,css,mp3,mp4,mpg,avi,wmv,mov,3gp,fla,swf,js), and filename contains a dot (.).

Impact:
Accept-Encoding header is removed, causing the server to not send a gzipped response.

Workaround:
Add this specific URL to sys db:

dosl7.parse_html_excluded_urls


984449-2 : Unnecessary swagger validation violation may raise due to behavioral WAF parameter traps that have identical name

Links to More Info: BT984449

Component: Application Security Manager

Symptoms:
An unnecessary swagger validation violation may be raised about illegal parameters which is actually the parameter trap that was injected by ASM and failed to be ignored by the enforcer. Only one of these parameter traps will be ignored - enforcement will be avoided for it. Expected behavior is to avoid enforcement for both parameters traps.

Conditions:
Security team provide 2 traps with type parameter and with identical name but with different values. In adition one of these parameter traps was injected by ASM to the web-page.

Impact:
Unecessary swagger validation violation may raise regarding one of these parameters traps and request may be blocked, instead of ignoring swagger enforcement for both parameters traps.

Workaround:
None.


982801-2 : AGC hardening

Links to More Info: BT982801

Component: Guided Configuration

Symptoms:
AGC does not follow current best practices.

Conditions:
- APM is provisioned
- AGC used for Azure AD Application

Impact:
AGC does not follow current best practices.

Workaround:
N/A


981485-6 : Neurond enters a restart loop after FPGA update.

Links to More Info: BT981485

Component: TMOS

Symptoms:
After FPGA firmware upgrade, the neurond process might enter a restart loop, unable to recover.

When the problem is present you might see logs similar to:
-- notice chmand[6674]: 012a0005:5: FPGA PNP FW upgrade check: req type 0, file:Latest
-- notice chmand[6674]: 012a0005:5: FPGA: Requesting type: 0, vers: Latest
-- notice chmand[6674]: 012a0005:5: FPGA: current type: 2, vers: hsb_5SGXEA7H2F35C2_t37dc_1d10_v5.23.5.0_d20.06.11.00.bit
-- notice chmand[6674]: 012a0005:5: FPGA: match for type: 0, vers: hsb_5SGXEA7H2F35C2_t37dc_1d10_v5.6.7.0_d20.06.11.00.bit
-- notice chmand[6674]: 012a0005:5: removed /var/db/mcpdb.* FPGA current disk firmware updated to: /L7L4_BALANCED_FPGA type: 0
-- notice chmand-fpga-pnp[17551]: Stopping TMM, BCM56xxd, and neurond
-- notice logger[17553]: /bin/bash /etc/init.d/fw_pnp_upgrade upgrade restart ==> /usr/bin/bigstart stop tmm bcm56xxd neurond

Conditions:
FPGA firmware mismatch, leading to FPGA firmware upgrade.

Impact:
Enhanced flow acceleration provided by the Neuron chip cannot be utilized.

Workaround:
Perform a full system restart.


981145-1 : DoS events do not include the attack name for "tcp syn ack flood"

Links to More Info: BT981145

Component: Advanced Firewall Manager

Symptoms:
BIG-IQ does not display the attack name for a 'tcp syn ack flood' attack.

Conditions:
DoS on BIG-IP enabled to address 'tcp syn ack flood' attack.

Impact:
Lack of DoS attack information. The mitigation occurs as expected. Only the notification information is missing.

Workaround:
None.


979213-1 : Spurious spikes are visible in Throughput(bits) and Throughput(packets) performance graphs following a restart of TMM.

Links to More Info: BT979213

Component: Local Traffic Manager

Symptoms:
Upon reviewing the performance graphs in the GUI, you may notice significant spikes in the Throughput(bits) and Throughput(packets) graphs.

The spikes may report unrealistically high levels of traffic.

Note: Detailed throughput graphs are not affected by this issue.

Conditions:
This issue occurs when the following conditions are met:

-- The BIG-IP device is a physical system.
-- TMM was restarted on the system.
-- At some point, at least one interface was up on the system and recorded some traffic.

Impact:
This issue is purely cosmetic but might cause concern when reviewing the performance graphs.

Workaround:
None.


978953-3 : The value of the sys db variable vlan.backplane.mtu intermittently out-of-sync with the value of the MTU of the kernel interface tmm_bp during the initial boot up

Links to More Info: BT978953

Component: Local Traffic Manager

Symptoms:
During the initial boot of the device the MTU of the tmm_bp kernel interface is out-of-sync with the value of sys db vlan.backplane.mtu as well as out-of-sync with the MTU displayed by the following command:
 tmsh show /net vlan all-properties -hidden.
 tmsh list net vlan tmm_bp all-properties -hidden.

Additionally, running the following command:

modify sys db vlan.backplane.mtu value <some value> (within the range accepted), and saving the configuration change does not last through a reboot.

Conditions:
This issue occurs on the first boot intermittently.

Impact:
When the values are seen at non-sync, after the modification of the backplane vlan mtu and saving the config, changing the mtu config value does not last through a reboot.

Workaround:
Rebooting the device resolves the issue


977953-3 : Show running config interface CLI could not fetch the interface info and crashes the imi

Links to More Info: BT977953

Component: TMOS

Symptoms:
The confd command 'show running-config' does not display interface information if nsm and bgpd are the only processes running.

If you run 'show running-config interface', imi crashes.

Conditions:
1. nsm and bgpd are the daemons running.
2. Run the "show running-config" command

Impact:
Imish cannot retrieve interface information from the show running-config command.

Workaround:
* Enable OSPF. For example,

  # tmsh modify /net route-domain 0 routing-protocol add { BGP OSPFv3 }

  # ps -ef | egrep -i ospf
  root 11954 4654 0 11:25 ? S 0:00 ospf6d%0


977625-1 : GTM persistence records linger in tmm

Links to More Info: BT977625

Component: Global Traffic Manager (DNS)

Symptoms:
-- GTM persistence records are not cleared.
-- GTM still answers from persist records even though the persist records not listed by the "tmsh show gtm persist" command.

Conditions:
Persistence for wideip or application is disabled and then enabled quickly afterwards

Impact:
GTM answers from stale persist records.

Workaround:
Do not enable persistence right after disabling.


977449-1 : Total address and Total endpoints is shown as '0' in nat stats

Links to More Info: BT977449

Component: Advanced Firewall Manager

Symptoms:
Total address and Total endpoints is shown as '0' (zero) in the output of 'show ltm nat-stats roll-up-level fw-nat-source-translation-object name <name> all',

Conditions:
The prefix length for IPv6 source translation is configured as less than or equal to 64.

Impact:
There is no functional impact, as only the 'show' output is affected for the two stats.

Workaround:
None


976525-5 : Transparent monitors can have the incorrect source address when snat.hosttraffic is enabled

Links to More Info: BT976525

Component: Local Traffic Manager

Symptoms:
In BIG-IP v13.1.3.2 and later, there is new functionality to SNAT the traffic coming from the host system. When there are multiple routes to a destination address and transparent monitors are in use, tmm occasionally picks the wrong source IP for these connections.

Conditions:
-- The db variable snat.hosttraffic is enabled.
-- Gateway pool with multiple members.
-- Transparent monitors.

Impact:
The system chooses the wrong source IP address for the egress interface. That incorrect source IP address might cause traffic to return on the wrong VLAN.

Workaround:
Use either of the following workarounds:

-- Disable VLAN keyed connections: modify sys db connection.vlankeyed value disable

-- Upgrade to a version with a fix for ID 826905 (https://cdn.f5.com/product/bugtracker/ID826905.html) and disable snat.hosttraffic.


976517-2 : Tmsh run sys failover standby with a device specified but no traffic group fails

Links to More Info: BT976517

Component: TMOS

Symptoms:
The tmsh run /sys failiover standby device <device> command fails and returns an error if no traffic-group is specified:

Syntax Error: There is no failover device with a name (/Common/bigip2.localhost).

Conditions:
Two or more BIG-IPs configured with high availability (HA)

Impact:
You are required to specify all the traffic groups you want to failover to a peer.

Workaround:
For each traffic group that you want to failover to a peer run the tmsh run /sys failover standby.

For example if you want to fail over both traffic groups traffic-group-1 and traffic-group-2 to failover to bigip2.localhost, run the following:

tmsh run /sys failover standby device bigip2.localhost traffic-group traffic-group-1

tmsh run /sys failover standby device bigip2.localhost traffic-group traffic-group-2

If you want the device to be standby for all traffic groups but you don't care what device takes over as active, run the following command (note there is no traffic-group nor device):

tmsh run /sys failover standby


975725-5 : Wildcard virtual servers do not forward L3 unicast traffic sent to L2 broadcast

Links to More Info: BT975725

Component: Local Traffic Manager

Symptoms:
L3 unicast traffic with L2 broadcast destination MAC (ff:ff:ff:ff:ff:ff) matching wildcard virtual servers is not handled properly.

Conditions:
Wildcard virtual server is configured to handle such traffic.

Impact:
Traffic will not be forwarded properly.

Workaround:
Use specific non-wildcard virtual-server.


974985-6 : Dosl7/bot does not ignore non-http traffic even when disabled via iRule DOSL7::disable

Links to More Info: BT974985

Component: Application Security Manager

Symptoms:
Non http traffic isn't forwarded to the backend server

Conditions:
- ASM provisioned
- DoS Application or Bot Defense profile assigned to a virtual server
- DOSL7::disable applied at when CLIENT_ACCEPTED {}

Impact:
Broken webapps with non-http traffic

Workaround:
Instead of using DOSL7::disable, redirect non-http traffic to non-http aware virtual server using the iRule command virtual <virtual_server_name>


974513-7 : Dropped requests are reported as blocked in Reporting/charts

Links to More Info: BT974513

Component: Application Security Manager

Symptoms:
Dropped requests are reported as blocked in Reporting/charts.

Conditions:
Request is dropped (or client side challenge / captcha is not answered) as part of a brute force mitigation or a slow post attack causes dropping of a request.

Impact:
Data reported might be incorrect. There is a filter for dropped requests which, when selected, does not show anything, even when there are drops.

Workaround:
None.


974205-5 : Unconstrained wr_urldbd size causing box to OOM

Links to More Info: BT974205

Component: Traffic Classification Engine

Symptoms:
The wr_urldbd processes' memory grows and can exceed 4 GB. This might cause an out-of-memory (OOM) condition when processing URLCAT requests.

Conditions:
This occurs when processing a large volume of distinct and valid URLCAT requests.

Impact:
The device eventually runs out of memory (OOM condition).

Workaround:
Restart the wr_urldbd process:
 restart sys service wr_urldbd


973341-1 : Customized device certs will break scripts relying on /config/httpd/conf/ssl.crt/server.crt

Links to More Info: BT973341

Component: Global Traffic Manager (DNS)

Symptoms:
Bigip_add, big3d_install, gtm_add will not work.

Conditions:
Device cert is customized.

Impact:
Bigip_add, big3d_install, gtm_add not work.

Workaround:
Copy the content of the new cert to default file "/etc/httpd/conf/ssl.crt/server.crt".


969553-1 : A DNS Cache (or Network DNS Resolver) returns SERVFAIL to some queries.

Links to More Info: BT969553

Component: Global Traffic Manager (DNS)

Symptoms:
- A DNS Cache (or Network DNS Resolver) returns SERVFAIL responses to clients, despite the BIG-IP system receiving a good (albeit delayed) response from upstream servers.

- When this happens, the BIG-IP system rejects the responses from the upstream servers with ICMP errors (Destination unreachable - Port unreachable).

- If the db key dnscacheresolver.loglevel is set to debug5, the following error message is visible in the /var/log/ltm file when this issue occurs:

debug tmm[13147]: DNScache: request example.com. has exceeded the maximum number of glue fetches 17 to a single delegation point

- If a Network DNS Resolver is used with an HTTP Explicit Proxy profile, the symptoms can appear as "503 Service Unavailable" responses to clients due to DNS lookup failure.

Conditions:
This issue occurs when the following conditions are met:

- A DNS Cache (or Network DNS Resolver) is in use on the BIG-IP system.

- The aforementioned object is configured with a forward-zone that uses multiple servers to perform resolutions.

- The RTT of the servers fluctuates. For example, the servers are generally fast to reply for most domains, but take extra time to reply for a given domain.

- 'Randomize Query Character Case' is enabled in the DNS Cache (or Network DNS Resolver).

- If the requests for the domain take a long time to resolve, BIG-IP may reply with SERVFAIL.

Impact:
Clients of the BIG-IP DNS Cache (or Network DNS Resolver) are not returned an answer. As a result, application failures may occur.

Workaround:
You can work around this issue by changing 'Randomize Query Character Case' to 'No' in the DNS Cache (or Network DNS Resolver) settings.


968953-1 : Unnecessary authorization header added in the response for an IP intelligence feed list request

Links to More Info: BT968953

Component: Advanced Firewall Manager

Symptoms:
Empty authorization header in the response for an IP intelligence feed list request.

Conditions:
Feed list configured without username/password pair.

Impact:
Feed List request from dwbld adds unnecessary Authorization header. There is no functional impact.

Workaround:
None.


968949-7 : Keepalives aren't sent in FIN_WAIT_2 when using a TCP profile

Links to More Info: BT968949

Component: Local Traffic Manager

Symptoms:
When a client-side connection goes into FIN_WAIT_2, BIG-IP does not send keepalives even if they are being sent on the server-side connection.

Conditions:
- Virtual server configured with a TCP profile and network listener.

Impact:
Client-side connections timeout prematurely.
As a result, the server-side connections end up being open indefinitely.

Workaround:
No workaround currently known.


967905-5 : Attaching a static bandwidth controller to a virtual server chain can cause tmm to crash

Links to More Info: BT967905

Component: TMOS

Symptoms:
Tmm crashes.

Conditions:
-- static bwc
-- virtual to virtual chain

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Do not use the static bwc on a virtual chain.


967769-1 : During reset of high-speed interfaces, TMMs may mistakenly continue hardware watchdog checks

Links to More Info: BT967769

Component: TMOS

Symptoms:
Tmm crashes and restarts. The following panic message is found in /var/log/tmm:

    notice panic: ../dev/hsb/if_hsb.c:6129: Assertion "HSB lockup, see ltm and tmm log files" failed.

Conditions:
-- Running on a platform that incorporates 'HiGig MAC' network interfaces.
-- Some error or glitch is detected on the high-speed bus (HSB).
-- Software commands a reset of the HSB and interface hardware.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


967737-3 : DNS Express: SOA stops showing up in statistics from second zone transfer

Links to More Info: BT967737

Component: Global Traffic Manager (DNS)

Symptoms:
Start of Authority (SOA) record is not displayed in zone statistics.

Conditions:
The issue appears after the 2nd zone transfer.

Impact:
This is a cosmetic issue without any actual impact.

Workaround:
None


967573-3 : Qkview generation from Configuration Utility fails

Links to More Info: BT967573

Component: TMOS

Symptoms:
When you attempt to generate a qkview using the Configuration Utility, the system fails to generate a qkview.

Conditions:
Trying to generate a Qkview using the Configuration Utility.

Impact:
The Configuration Utility cannot be used to generate a qkview.

Workaround:
Use the qkview command to generate a qkview from the command line.


967557-1 : Improve apm logging when loading sys config fails due to corruption of epsec rpm database

Links to More Info: BT967557

Component: TMOS

Symptoms:
Loading sys config fails and mcpd may not be running properly due to corruption of EPSEC rpm database. It is difficult to tell from logs that the issue is with epsec rpm database. This error may be the only indication:

emerg load_config_files[10761]: "/usr/bin/tmsh -n -g -a load sys config partitions all base " - failed. -- Error: failed to reset strict operations; disconnecting from mcpd. Will reconnect on next command.

Conditions:
Loading of sys config fails due to corruption of EPSEC rpm database.

Impact:
Difficult to troubleshoot the root cause for config load failure.


967353-1 : HTTP proxy should trim spaces between a header field-name and colon in its downstream responses.

Links to More Info: BT967353

Component: Local Traffic Manager

Symptoms:
Client receives no response along with a connection reset by the BIG-IP system.

Conditions:
-- HTTP profile is enabled on the BIG-IP system.
-- Server sends HTTP response with one or more header field names separated with the trailing colon by a space.

Impact:
HTTP responses that should be delivered to the client by the proxy are not being sent out.

Workaround:
None


967245-1 : Incorrect SPVA counter incremented during Sweep attack on profile

Component: Advanced Firewall Manager

Symptoms:
Incorrect SPVA counters updated.

Conditions:
Configure DoS Sweep vector on an SPVA supported device.

Impact:
Usage of dos_spva_stat will result in displaying incorrect counters.


967185 : Increase the size limit of JWT for OAuth

Links to More Info: BT967185

Component: Access Policy Manager

Symptoms:
Currently, the allowed payload size for JWT is 4K. Users whose claims of length exceed the limit are unable to authenticate.

Conditions:
OAuth is configured with JWT.

Impact:
Users whose claims of length are more than the limit are unable to authenticate.


966949-6 : Multiple FQDN ephemeral nodes not deleted upon deleting FQDN template node

Links to More Info: BT966949

Component: TMOS

Symptoms:
If an FQDN template node is configured with "autopopulate enabled" and the FQDN name resolves to multiple IP addresses, multiple FQDN ephemeral nodes will be created.
If the FQDN template node is then deleted, the associated FQDN ephemeral nodes (sharing the same FQDN name) will not be deleted as expected.

Conditions:
This may occur under the following conditions:
-- An FQDN template node is configured with "autopopulate enabled"
-- The configured DNS server resolves the FQDN name to multiple IP addresses
-- You are running an Affected Version of BIG-IP, or an Engineering Hotfix based on a non-Affected Version of BIG-IP which contains a fix for ID 722230

This issue does not occur if only one FQDN ephemeral node is created for the associated FQDN template node.

Impact:
Unused FQDN ephemeral nodes may remain in the active configuration.
-- Since is it not possible to delete an FQDN template node if there are any FQDN template pool members referring to that node, it is not possible for any FQDN ephemeral pool members to remain when the steps that lead to this issue occur.
-- Since traffic can only be passed to FQDN ephemeral pool members, the existence of the unused FQDN ephemeral nodes does not lead to traffic being passed to such nodes.

Workaround:
It is possible to work around this issue by one of the following methods:
-- Manually deleting the remaining FQDN ephemeral nodes using the "tmsh" command-line interface (CLI)
(Note that this is normally not possible. It is possible to manually delete an FQDN ephemeral node only if the corresponding FQDN template node no longer exists.)
-- Restarting BIG-IP (for example, using the command "bigstart restart")


966785-1 : Rate Shaping stops TCP retransmission

Links to More Info: BT966785

Component: Local Traffic Manager

Symptoms:
When rate shaping is applied to a virtual server, the BIG-IP system does not retransmit unacknowledged data segments, even when the BIG-IP system receives a duplicate ACK.

Conditions:
This issue occurs when both of the following conditions are met:

-- Virtual server configured with a rate shaping.
-- Standard type of virtual server.

Impact:
The BIG-IP system does not retransmit unacknowledged data segments.

Workaround:
None


966613-6 : Cannot create XML profile based on WSDL when wsdl contains empty soap:address – getting error ‘Column 'object_uri' cannot be null’

Links to More Info: BT966613

Component: Application Security Manager

Symptoms:
Perl error returned when saving new XML content profile using wsdl file with empty soap:address node "<soap:address/>".

Conditions:
Creating a new content profile using a wsdl file which contains a "<soap:address/>" node which does not have a "location" attribute value.

When this content profile is saved, ASM attempts to create an associated URL with no value, which fails validation.

Impact:
After trying to save the content profile, you see an error message: "Could not create XML Profile; Error: DBD::mysql::db do failed: Column 'object_uri' cannot be null"

Workaround:
Delete the node "<soap:address/>" from the wsdl file


966461-7 : Tmm memory leak

Links to More Info: BT966461

Component: Global Traffic Manager (DNS)

Symptoms:
Tmm leaks memory for DNSSEC requests.

Conditions:
NetHSM is configured but disconnected.

or

Internal FIPS card is configured and tmm receives more DNSSEC requests than the FIPS card is capable of handling.

Impact:
Tmm memory utilization increases over time.

Workaround:
None


965897-4 : Disruption of mcpd with a segmentation fault during config sync

Links to More Info: BT965897

Component: TMOS

Symptoms:
The mcpd process on the peer device fails with a segfault, restarts and then segfaults again in a loop

Numerous messages may be logged in the "daemon" logfile of the following type:

emerg logger[2020]: Re-starting mcpd

Conditions:
-- High availability (HA) configuration
-- A port-and-address list configuration is changed to be only an address list
-- A config sync occurs

Impact:
Continuous restarts of mcpd process on the peer device.

Workaround:
One possible measure for getting the peer-machine "mcpd" out of its failure mode is to command the still-functioning system to push a "full" config sync to the appropriate device group. Doing this twice consecutively may be necessary.

  # tmsh run /cm config-sync force-full-load-push to-group APPROPRIATE-DEVICE-GROUP


965849-1 : Displayed 'Route Domain ID' value is confusing if it is set to None

Links to More Info: BT965849

Component: Advanced Firewall Manager

Symptoms:
The numeric value of RT_DOMAIN_NONE is 65535. Lsndb displays this value, which is confusing.

Conditions:
If the parent route domain is set to "None", lsndb displays 65535.

Impact:
No impact on functionality.

Workaround:
None


965837-4 : When BIG-IP is configured with PingAccess profile, tmm can core when there is an active connection

Links to More Info: BT965837

Component: Access Policy Manager

Symptoms:
When BIG-IP is configured with a PingAccess profile and an SSL profile is associated with both the BIG-IP virtual server and a ping access configuration, an active connection to the virtual server may lead to a TMM crash.

Conditions:
-- SSL is configured on both the BIG-IP virtual server that contains the ping access profile and ping access configuration.
-- Active connection to the BIG-IP virtual server
-- Config sync is triggered or "tmsh load sys config" is triggered

Impact:
Traffic disrupted while tmm restarts.

Workaround:
No workaround.


965053-4 : [Regression of ID787881 & ID761032] DNSX fails to sign zone transfer using tsig key after failure

Links to More Info: BT965053

Component: Global Traffic Manager (DNS)

Symptoms:
DNSX fails to sign zone transfer using tsig key.

Conditions:
A transfer error occurs while DNSX is initializing.

Impact:
DNSX zones are not been updated.

Workaround:
Re-enter the tsig key secret.


964533-2 : Multiple session_process_pending_event_callback ERROR: could not send callback messages get logged in the tmm logs.

Links to More Info: BT964533

Component: TMOS

Symptoms:
The BIG-IP system tmm logs show multiple session_process_pending_event_callback errors.

Conditions:
If a session is deleted before all the session db callback events are handled, this error can occur while passing normal traffic.

Impact:
Numerous error event entries found in the TMM log:
notice session_process_pending_event_callback ERROR: could not send callback to 10.10.10.10:460 - 10.10.10.10:80 ERR_NOT_FOUND.

There is no impact other than additional log entries.

Workaround:
None.


964125-6 : Mcpd cores while processing a query for node statistics when there are thousands of FQDN nodes and pool members.

Links to More Info: BT964125

Component: TMOS

Symptoms:
Mcpd might core and restart if it fails to process a query for all node statistics in less than 5 minutes.

There is more then one avenue where node statistics would be queried.

The BIG-IP Dashboard for LTM from the GUI is one example.

Conditions:
Thousands of FQDN nodes and pools with FQDN pool members and a query for all node statistics.

Impact:
Mcpd restarted which will cause services to failover. Traffic and configuration disrupted while mcpd restarts.


962477-2 : REST calls that modify GTM objects as a user other than admin may take longer than expected

Links to More Info: BT962477

Component: TMOS

Symptoms:
After performing a REST call to modify a GTM object, subsequent requests may take longer than expected to complete. Delays of 800-1000ms are possible for a brief time after a GTM object is modified.

Conditions:
Modifying a GTM object with a user other than "admin". When a device is part of a GTM sync group.

Impact:
Slower than expected REST performance. Scripts that perform a series of modifications and subsequent queries could be heavily impacted.

Workaround:
Use the admin account or use transactions.


962177-6 : Results of POLICY::names and POLICY::rules commands may be incorrect

Links to More Info: BT962177

Component: Local Traffic Manager

Symptoms:
When a traffic policy is applied to a virtual server, the iRule commands POLICY::names and POLICY::rules returns incorrect results.

Conditions:
-- BIG-IP has a virtual server with one or more traffic policies having more than one rule.
-- An iRule with POLICY::names and/or POLICY::rules is applied to virtual server to run on multiple transactions over the same connection.

Impact:
Traffic processing may not provide expected results.


961653-3 : Unable to retrieve DNS link statistics via SNMP OID gtmLinkStatRate

Links to More Info: BT961653

Component: Local Traffic Manager

Symptoms:
Unable to retrieve link statistics via SNMP OID gtmLinkStatRate

config # snmpwalk -c public localhost F5-BIGIP-GLOBAL-MIB::gtmLinkStatRate
F5-BIGIP-GLOBAL-MIB::gtmLinkStatRate = No Such Object available on this agent at this OID

Conditions:
A BIG-IP DNS/LC system configured with link objects.

Try to do an snmpwalk for F5-BIGIP-GLOBAL-MIB::gtmLinkStatRate which is not successful.

Impact:
BIG-IP DNS system link statistics cannot be retrieved via SNMP.

Workaround:
No workaround.


961001-5 : Arp requests not resolved for snatpool members when primary blade goes offline

Links to More Info: BT961001

Component: Local Traffic Manager

Symptoms:
Arp requests not resolved for snatpool members and traffic does not go through when the primary blade becomes offline.

Conditions:
-- VIPRION platforms serving as AAA and Diameter virtual server to load-balance.
-- route-domain configured other than 0.
-- Radius authentication pool and snatpool are configured.
-- Primary blade goes offline and new Primary is not elected.

Impact:
Traffic failure when primary became offline.

Workaround:
Disable primary blade which is offline.


959965-1 : Asmlogd stops deleting old protobufs

Component: Application Security Manager

Symptoms:
Protobuf files are being cleaned only when trying to write to the protobuf file and on startup.

Conditions:
This occurs during normal operation.

Impact:
/var/asmdata1 can run out of disk space.

Workaround:
None


959957-1 : Asmlogd stops deleting old protobufs

Links to More Info: BT959957

Component: Application Security Manager

Symptoms:
Asmlogd restarts and there are asmlogd errors:

asmlogd|ERR|Oct 19 13:46:35.199|6005|,,asmlogd ended unexpectedly
asmlogd|ERR|Oct 19 13:46:35.203|6005|,,Can't call method "size" on an undefined value at /usr/local/share/perl5/F5/RequestLog.pm line 1902.

Conditions:
Disk is full -- the following warnings are being displayed:

err diskmonitor[3483]: 011d0004:3: Disk partition /var/asmdata1 (slot 1) has only 0% free

Impact:
Old protobuf files are not cleaned up.

Workaround:
0) If the /appdata partition is filled to 100% and MySQL restarts continuously, refer to the following Knowledge Articles:
   https://support.f5.com/csp/article/K14956
   https://support.f5.com/csp/article/K42497314

1) To identify the empty partitions, look into:
   SELECT * FROM INFORMATION_SCHEMA.PARTITIONS WHERE table_name = 'REQUEST_LOG' AND table_schema = 'PRX'\G

2) For every partition that is empty, manually (or via shell script) execute this sql:
   ALTER TABLE PRX.REQUEST_LOG DROP PARTITION empty_partition_name
where 'empty_partition_name' is the partition name as 'p100001'

4) Increase 'open_files_limit' to '10000'.
--------------------------------
In the /etc/my.cnf file:
1. Change the value of the 'open_files_limit' parameter to 10000.
2. Restart MySQL:
   bigstart restart mysql
--------------------------------

5) pkill asmlogd

Note: This workaround does not survive upgrade. It must be reapplied after every upgrade until the upgraded version contains a fix.


959613-1 : SIP/HTTPS monitor attached to generic-host virtual server and pool shows 'blank' reason

Links to More Info: BT959613

Component: Global Traffic Manager (DNS)

Symptoms:
When you double-monitor a Generic Host Virtual Server (pool level + virtual server level) using the same SIP/HTTPS monitor, the 'Reason' is omitted from the output. 'tmsh show gtm server <server> virtual-servers' shows a "blank" reason for monitoring failure/success.

Conditions:
Double-monitor a Generic Host virtual server (pool level + virtual server level) using the same SIP/HTTPS monitor.

Impact:
Impedes your ability to identify the failure/success reason quickly.

Workaround:
Do not use the same monitor on both the virtual server and the pool level.


959241-1 : Fix for ID871561 might not work as expected on the VCMP host

Links to More Info: BT959241

Component: TMOS

Symptoms:
Attempting to deploy an engineering hot fix (EHF) for ID871561 (https://cdn.f5.com/product/bugtracker/ID871561.html) fails in the same manner

Conditions:
-- Attempting to install an EHF containing a fix for ID871561 on a vCMP guest
-- The fix for ID871561 has not already been applied to the vCMP guest

Impact:
Unable to perform software installations on vCMP guests using installation media located on the vCMP host even if fix for ID871561 is available on VCMP guest.

Workaround:
Option 1:
===========
Make sure that the .iso files for both base image and engineering hotfix are copied to the vCMP guest (under /shared/images) before starting the installation. If installing the software from the command line, use syntax similar to the following:

tmsh install sys software hotfix <hotfix-image-name> volume <volume.name>

Option 2:
===========
Even if the engineering hotfix installation has failed, the base image should still have been installed properly. You can restart the vCMP guest and perform a hotfix installation on top of already installed base image, using syntax similar to the following:

tmsh install sys software hotfix <hotfix-image-name> volume <volume.name>

Option 3:
===========
Even if the engineering hotfix installation has failed, the base image should still have been installed properly. Ensure there is copy of the engineering hotfix image locally within the vCMP Guest.

Then restart the lind service on the vCMP Guest:
  tmsh restart sys service lind

If running the vCMP Guest on multiple slots, you may need to restart lind on all slots. From the primary slot on the vCMP Guest, run:
  clsh tmsh restart sys service lind

The hotfix installation should begin again, this time using the hotfix from within the /shared/images/ location on the vCMP Guest.

Option 4:
===========
Manually eject the CD from the vCMP guest's virtual CD drive, and then restart lind. On the vCMP Guest:

1. Confirm the wrong ISO image is still locked (inserted in the CD drive):
  isoinfo -d -i /dev/cdrom

Note: Pay attention to the volume ID in the output from within the vCMP guest.

2. Unlock (eject) the image:
  eject -r -F /dev/cdrom && vcmphc_tool -e

3. Verify the CD drive is now empty:
  isoinfo -d -i /dev/cdrom

The output should report an error that includes:
<...> Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 <…>

4. Restart lind:
  tmsh restart sys service lind

If running the vCMP Guest on multiple slots, you may need to restart lind on all vCMP Guest slots. From the primary slot on the vCMP Guest, run:
  clsh tmsh restart sys service lind


959057-5 : Unable to create additional login tokens for the default admin user account

Links to More Info: BT959057

Component: TMOS

Symptoms:
When remote user authentication is configured, BIG-IP systems apply maximum active login token limitation of 100 to the default admin user account.

Conditions:
Remote Authentication is configured

Impact:
Unable to create more than 100 tokens for admin when remote authentication is configured


958785-8 : FTP data transfer does not complete after QUIT signal

Links to More Info: BT958785

Component: Local Traffic Manager

Symptoms:
When a QUIT signal is sent over an FTP connection to an FTP virtual server during a data transfer, the data connection is closed immediately instead of waiting until the transfer is complete.

Conditions:
- BIG-IP configured with an FTP virtual server
- A client connects to the FTP virtual server
- Client starts an FTP data transfer
- Client sends a QUIT signal before the data transfer completes.

Impact:
FTP data connections are closed prematurely, causing incomplete data transfers.

Workaround:
This does not occur if the FTP profile for the FTP virtual server has inherit-parent-profile set to enable.


958773-2 : [SAML SP] Assertion canonicalization fails if <AttributeValue> contains spaces.

Links to More Info: BT958773

Component: Access Policy Manager

Symptoms:
In /var/log/apm

[apmd]modules/Authentication/Saml/SamlSPAgent.cpp: 'verifyAssertionSignature()': 5883: Verification of SAML signature #1 failed
[apmd]SAML Agent: /Common/xxxxxx failed to process signed assertion, error: Digest of SignedInfo mismatch

Conditions:
SAML attribute values have double-byte spaces.

Impact:
Verification of SAML signature fails.

Workaround:
Remove double-byte spaces from SAML Attribute values (consult a vendor who populates SAML attribute values for advice on how to remove double-byte spaces).


958601-4 : In the GUI, searching for virtual server addresses does not match address lists

Links to More Info: BT958601

Component: TMOS

Symptoms:
In the GUI, if you filter the virtual server listing using an IP address, or part of an IP address, if there are any virtual servers that are using an address list that contains an address that matches that search string, those virtual servers will not show up in the search results.

Similarly, if you filter the virtual server listing using an IP address, or part of an IP address, if there are any virtual servers that are using an address that matches the search string, but are using a port list, those virtual servers will not show up in the search results.

Conditions:
-- Using Address Lists or Port lists with a virtual server.
-- Using the GUI to search for virtual servers based on address.

Impact:
Virtual servers that should match a search are not found.

Workaround:
None.


958157-4 : Hash collisions in DNS rapid-response packet processing

Links to More Info: BT958157

Component: Global Traffic Manager (DNS)

Symptoms:
DNS rapid-response (FastDNS) packet processing may cause unexpected traffic drops.

Conditions:
- DNS rapid-response is enabled in a DNS profile:

ltm profile dns dns {
    enable-rapid-response yes
}

Note: This issue is more likely to occur on systems with a lower number of TMMs.

Impact:
Unexpected traffic drops


957993-4 : Unable to set a port list in the GUI for an IPv6 address for a virtual server

Links to More Info: BT957993

Component: TMOS

Symptoms:
When creating a virtual server in the GUI with an IPv6 destination address and a port list (shared object) or a source address list (shared object), the system returns an error similar to:

0107028f:3: The destination (0.0.0.0) address and mask (ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) for virtual server (/Common/vs03-v6_dns) must be be the same type (IPv4 or IPv6).

Conditions:
-- Creating or updating a virtual server.
-- Attempting to use an IPv6 Host address with a Port List shared object or a Source Address List shared object.

Impact:
Unable to create/modify virtual server.

Workaround:
Create an Address List shared object with the IPv6 address in it and use that instead of the Host address.


956645-4 : Per-request policy execution may timeout.

Links to More Info: BT956645

Component: Access Policy Manager

Symptoms:
When attempting to access a resource that requires subsession validation, the client may receive an HTTP 503 "Service Unavailable" response, and the logs indicate that per-request policy execution time has expired.

Conditions:
Multiple connections are accessing the same subsession, triggering subsession lock contention.

Impact:
Some clients will fail to connect to their destination.

Workaround:
Add criteria to the gating criteria to enable more fine-grained subroutines to reduce subsession contention. For example, add category, or application name, to the gating criteria. In the case of API protection, consider concatenating credentials with the resource hostname (plus port).

Increase the per-request policy execution timeout value, controlled by the variable tmm.access.prp_global_timeout, to a higher value.


956373-4 : ASM sync files not cleaned up immediately after processing

Links to More Info: BT956373

Component: Application Security Manager

Symptoms:
Some ASM sync files remain on disk after config sync finishes. They remain until periodic clean-up tasks activate

Conditions:
-- ASM provisioned
-- BIG-IP devices are in a sync group
-- Relatively small "/var" partition

Impact:
If the files are large it may lead to "lack of disk space" problem.


956133-2 : MAC address might be displayed as 'none' after upgrading.

Links to More Info: BT956133

Component: Local Traffic Manager

Symptoms:
The MAC Address of a BIG-IP Virtual Edition network interface is displayed as 'none' after upgrading.

Conditions:
1. The VLAN MTU is set to less than 1280 bytes on a BIG-IP network interface.
2. Upgrade BIG-IP to 14.1.0 or above from BIG-IP versions below 14.1.0.

Impact:
Traffic disrupted when the MAC address is set to 'none'.

Workaround:
N/A


955953-5 : iRule command 'table' fails to resume when used with Diameter 'irule_scope_msg'

Links to More Info: BT955953

Component: TMOS

Symptoms:
'table' command fails to resume causing processing of traffic to halt due to 'irule_scope_msg' causing iRule processing to proceed in a way that 'table' does not expect.

Conditions:
- iRule using 'table' command
- Diameter 'irule_scope_msg' enabled

Impact:
Traffic processing halts (no crash)


953477-1 : Syncookie HW mode not cleared when modifying VLAN config.

Links to More Info: BT953477

Component: TMOS

Symptoms:
Changing VLAN configuration can cause BIG-IP get stuck in hardware syncookie mode.

Conditions:
- Changing VLAN configuration when vlan-based syncookies are active.

For a list of platforms that support hardware syncookie protection, see https://support.f5.com/csp/article/K14779

Impact:
Device is stuck in hardware syncookie mode and generates syncookies.

Workaround:
Run the following command:
tmsh restart sys service tmm

Impact of workaround: restarting tmm disrupts traffic.


952521-1 : Memory allocation error while creating an address list with a large range of IPv6 addresses

Links to More Info: BT952521

Component: Advanced Firewall Manager

Symptoms:
When trying to create a large IPv6 address-list IP range either via the GUI, tmsh, or from loading a previously saved config, MCPd will temporarily experience memory exhaustion and report an error "01070711:3: Caught runtime exception, std::bad_alloc"

Conditions:
When adding an IPv6 address range that contains a very large number of IPs. This does not affect IPv4.

Impact:
The IP address range cannot be entered. If upgrading from a non-affected version of TMOS where an IP range of this type has been saved to the config, a std::bad_alloc error will be printed when loading the config after upgrading.

Workaround:
Use CIDR notation or multiple, smaller IP ranges.


950953-3 : Browser Challenges update file cannot be installed after upgrade

Links to More Info: BT950953

Component: Application Security Manager

Symptoms:
After upgrading BIG-IP, the Browser Challenges factory default update file cannot be installed, and you see this error:

Installation error: gpg: WARNING: unsafe ownership on homedir `/usr/share/live-update/share/gpg/browser_challenges_genesis_load'gpg: encrypted with 1024-bit ELG key, ID 7C3E3CE5, created 2007-03-20 "asm_sigfile_installer"gpg: Signature made Mon Aug 2

Conditions:
The new file that comes with the installation is ready to install

Impact:
New updated cannot be installed

Workaround:
There are 2 options:
1. download a new version of the update file (if exists)
2.
   2.1 download a copy of that file from the machine to your locale machine
   2.2 rename it :
       > cp BrowserChallenges_20200722_072935.im BrowserChallenges_<CURRENT_DATE>_<CURRENT_TIME>.im
       ## the date and time are for tracking and the have to be in a specific format DATE : YYYYMMDD, TIME: HHMMSS
   2.3 upload the file and install it manually from the LiveUpdate screen.


950917-4 : Apply Policy fails due to internal signature overlap following ASU ASM-SignatureFile_20200917_175034

Links to More Info: BT950917

Component: Application Security Manager

Symptoms:
Following Signature Update (-SignatureFile_20200921_124008 or later), newly added/activated policies may fail Apply Policy due to a duplicate key database error:

01310027:2: subsystem error (asm_config_server.pl,F5::SetActive::Impl::set_active): Setting policy active failed: Failed to insert to DCC.ACCOUNT_NEGSIG_SIGNATURE_PROPERTIES (DBD::mysql::db do failed: Duplicate entry '8112518117000363265' for key 'PRIMARY' at /usr/local/share/perl5/F5/BatchInsert.pm line 219. )

Conditions:
Signature Update -SignatureFile_20200921_124008 is installed, and a newly imported or inactive policy is applied.

Impact:
Apply policy fails.

Workaround:
You can use any of the following workarounds:

-- Install an older signature update -SignatureFile_20200917_175034

-- Disable staging for either signature 200101255 or signature 200101258 (or both) in the affected policies. The policy can then be successfully applied.

-- Run the following SQL command to correct all affected policies on the device:
----------------------------------------------------------------------
UPDATE PL_POLICY_NEGSIG_SIGNATURES policy_sigs INNER JOIN (select previous_enforced_rule_md5, policy_id, count(*) as mycount from PL_POLICY_NEGSIG_SIGNATURES where previous_enforced_rule_md5 != '' group by previous_enforced_rule_md5, policy_id having mycount > 1) as multi_sigs on policy_sigs.policy_id = multi_sigs.policy_id and policy_sigs.previous_enforced_rule_md5 = multi_sigs.previous_enforced_rule_md5 SET policy_sigs.previous_enforced_rule_md5 = '', policy_sigs.previous_enforced_rule = '';
----------------------------------------------------------------------


950305-5 : Analytics data not displayed for Pool Names

Links to More Info: BT950305

Component: Application Visibility and Reporting

Symptoms:
You cannot see reports (statistics->analytics->pool) when you choose to view by pool names.

Conditions:
This is encountered in the statistics screen.

Impact:
You can't see the statistics->analytics->pool report when you choose view by pool names.


950201-3 : Tmm core on GCP

Links to More Info: BT950201

Component: TMOS

Symptoms:
When BIG-IP Virtual Edition (VE) is running on Google Cloud Platform (GCP) with mergeable buffers enabled, tmm might core while passing traffic. Subsequently, the kernel locks up, which prevents the whole system from recovering.

TMM panic with this message in a tmm log file:

panic: ../dev/ndal/virtio/if_virtio.c:2038: Assertion "Valid num_buffers" failed.

Conditions:
-- VE running on GCP.
-- Mergeable buffers (mrg_rxbuf) is enabled on the guest with direct descriptors.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
You can use either of the following workarounds:

-- Use the sock driver. For more information see K10142141: Configuring the BIG-IP VE system to use the SOCK network driver :: https://support.f5.com/csp/article/K10142141

-- Request an Engineering Hotfix from F5, with mrg_rxbuf and lro turned off.


Note: Using either workaround has a performance impact.


950153-3 : LDAP remote authentication fails when empty attribute is returned

Links to More Info: BT950153

Component: TMOS

Symptoms:
LDAP/AD Remote authentication fails and the authenticating service may crash.

The failure might be intermittent.

Conditions:
LDAP/AD server SearchResEntry includes attribute with empty or NULL value.

This can be seen in tcpdump of the LDAP communication in following ways

1. No Value for attribute . Example in tcpdump taken on affected user :

vals: 1 item
        AttributeValue:

2. 1. NULL Value for attribute . Example in tcpdump taken on affected user :

vals: 1 item
    AttributeValue: 00

Impact:
Logging in via the GUI will fail silently
Logging in via ssh will cause the sshd service on LTM to crash and logs will be seen under /var/log/kern.log

The logs will be similar to :

info kernel: : [460810.000004] sshd[31600]: segfault at 0 ip 00002b3abcb2ef3e sp 00007fffef3431a0 error 4 in pam_ldap.so[2b3abcb2c000+7000]
info kernel: : [460810.002036] traps: sshd[31598] general protection ip:fffffffffffffff3 sp:80000 error:0

Workaround:
There is no Workaround on the LTM side.

For LDAP, you change/add the value from none/NULL on the affected attribute to ANY dummy value which will prevent the issue


949593-5 : Unable to load config if AVR widgets were created under '[All]' partition

Links to More Info: BT949593

Component: Application Visibility and Reporting

Symptoms:
When upgrading to or loading saved configuration on BIG-IP software v13.0.0 or later, if the configuration contains AVR widgets created under a partition of '[All]', the config load fails.

Conditions:
This occurs if one or more AVR widgets in the configuration was created under the read-only '[All]' pseudo-partition.
This could have occurred if you were running a version of BIG-IP which did not include the fix for ID 721408.

Impact:
Upgrading to or loading an affected configuration on BIG-IP v13.x or later fails.

Workaround:
Manually edit the /config/bigip.conf configuration file and change '[All]' to 'Common':

# sed -i 's/\\\[All\]/Common/g' /config/bigip.conf
# tmsh load sys config
# tmsh save sys config

This should be done before upgrading to BIG-IP v13.x or later, or before saving configuration to be loaded later, or before loading a saved configuration from the config files.


949477-4 : NTLM RPC exception: Failed to verify checksum of the packet

Links to More Info: BT949477

Component: Access Policy Manager

Symptoms:
NTLM authentication fails with the error:

RPC exception: Failed to verify checksum of the packet.

Conditions:
-- Start nlad process with 'encryption'.
-- Configure a user, and map that user to a huge number of groups.
-- Configure NTLM front-end authentication.

Impact:
User authentication fails.

Workaround:
1. Run the 'nlad' process with '-encrypt no' in the file /etc/bigstart/startup/nlad.

2. Disable encryption for nlad:
   # vim /etc/bigstart/startup/nlad

   change:
   exec /usr/bin/${service} -use-log-tag 01620000

   to:
   exec /usr/bin/${service} -use-log-tag 01620000 -encrypt no

3. Restart nlad to make the change effective, and to force the schannel to be re-established:
   # bigstart restart nlad


949137-1 : Clusterd crash and vCMP guest failover

Links to More Info: BT949137

Component: Local Traffic Manager

Symptoms:
Clusterd crashes and a vCMP guest fails over.

Conditions:
The exact conditions under which this occurs are unknown. It can occur during normal operation.

Impact:
Memory corruption and clusterd can crash, causing failover.

Workaround:
None.


948601-1 : File object checksum attribute is not updated when an external data-group file or external monitor file is edited from GU

Links to More Info: BT948601

Component: TMOS

Symptoms:
SHA1 checksum attribute/property of the file object is not persisted/published/propagated to the MCP datastore/GUI.

Conditions:
This could be observed when an external data-group file or external monitor file definition is edited from GUI.
Below mentioned is the workflow where the issue can be seen/replicated,
System ›› File Management : Data Group File List >> FILE
Edit the "definition" field of the file object & click update.
1.) edit sys file data-group "filename"
2.) list sys file data-group "filename"
Aforementioned commands can be used from TMOS shell to understand the correct behavior that is expected when the same is done from GUI

Impact:
You are unable to identify whether the file object was modified by just validating/comparing the file object's metadata/schema property i.e. "checksum SHA1"

Workaround:
None


948065-1 : DNS Responses egress with an incorrect source IP address.

Links to More Info: BT948065

Component: Local Traffic Manager

Symptoms:
DNS responses over a certain size egress the BIG-IP with an incorrect source IP address set.

Conditions:
Large responses of ~2460 bytes from local BIND

Impact:
The response to the client appears to be coming from the wrong source IP address, and the request fails.

Workaround:
Change 'max-udp-size' in BIND to a smaller value reduces the size of response, which stops the fragmentation.

Note: This workaround has limitations, as some records in 'Additional Section' are truncated.


947745-3 : Tcp proxy does not ignore HUDEVT_CHILD_CONNECTED and gives an error

Links to More Info: BT947745

Component: Local Traffic Manager

Symptoms:
Tcp proxy does not ignore HUDEVT_CHILD_CONNECTED and gives an error message:
hud_tcp_serverside_handler/3676: 10.0.0.20.21 - 10.10.10.1.51147: unexpected serverside message HUDEVT_CHILD_CONNECTE

Conditions:
FTP profile is in use

Impact:
Logs entries in the log file

Workaround:
None


947613-2 : APM reset after upgrade and modify of LDAP Group Lookup

Links to More Info: BT947613

Component: Access Policy Manager

Symptoms:
-- Per-Request Policy fails.
-- APM reset the connection.

Conditions:
Upgrade from 13.1.3.4 to 15.1.0.4 and modify the LDAP Group Lookup.

Impact:
APM resets the connection.

Workaround:
1. Create a new empty object with the same expression as the LDAP Group Lookup.
2. Remove the LDAP Query Agent.
3. Restart the system:
bigstart restart tmm


947217-6 : Fix of ID722682 prevents GTM config load when the virtual server name contains a colon

Links to More Info: BT947217

Component: Global Traffic Manager (DNS)

Symptoms:
GTM is unable to load the configuration.

Conditions:
-- GTM has been upgraded to a version with fix for ID722682 from a version that does not have the fix for ID722682
-- A GTM server has a name with no colon
-- That GTM server has a virtual server with colon in the name
-- That virtual server is added to a pool

Impact:
GTM config file cannot be loaded successfully after upgrade.

Workaround:
Edit bigip_gtm.conf manually to delete "\\" or replace colon ":" with other non-reserved char. such as "-".


947125-7 : Unable to delete monitors after certain operations

Links to More Info: BT947125

Component: Local Traffic Manager

Symptoms:
Unable to delete monitor with an error similar to:

01070083:3: Monitor /Common/my-mon is in use.

Conditions:
-- Monitors are attached directly to pool members, or node-level monitors exist.
-- Issuing the "reloadlic" command, which causes the configuration to get rebuilt implicitly.

Impact:
Unable to delete object(s) no longer in use.

Workaround:
When the system enters this state, save and reload the configuration using the following command:
tmsh save sys config && tmsh load sys config


945413-2 : Loop between keymgmtd and mcpd causes BIG-IP to be out of sync or in constant automatic config sync

Links to More Info: BT945413

Component: TMOS

Symptoms:
The BIG-IP system constantly downloads the certificate bundle if the CA-bundle manager config includes a URL.

Symptoms are different depending on if BIG-IP systems is in a manual or automatic sync device group.

Manual sync device groups will not stay in sync.

Automatic sync device groups will constantly sync.

Conditions:
The CA-bundle manager is configured.

Impact:
The keymgmtd and mcpd process gets into a loop that causes constant config changes and if the ca-bundle-manager includes a URL, the BIG-IP system constantly downloads the bundle.


945189-5 : HTTPS monitor fails due to missing ECDHE-RSA-AES256-CBC-SHA

Links to More Info: BT945189

Component: Local Traffic Manager

Symptoms:
After upgrade, the 'DEFAULT' cipher in the server SSL profile attached to the HTTPS monitor does not include the ECDHE-RSA-AES256-CBC-SHA cipher suite in the Client Hello.

Conditions:
After upgrade, HTTPS monitor cipherlist is read from server SSL profile ciphers and set to DEFAULT after upgrade.

Impact:
1. Upgrade breaks the SSL pool monitoring.
2. It is also possible that the pools monitoring succeeds but with unexpected ciphers from the 'DEFAULT' list which may cause increased resource usage or unexpectedly weaker encryption.

Note: The ciphers negotiated between the HTTPS backend being monitored and the server SSL profile will still belong to the 'DEFAULT' list.

Workaround:
BIG-IP provides ways to customize the cipher string used by the server SSL profile.

Via the configuration utility:
https://techdocs.f5.com/en-us/bigip-15-0-0/big-ip-ltm-configuring-custom-cipher-string-for-ssl-negotiation/configuring-a-custom-cipher-string-for-ssl-negotiation.html

Via tmsh commands:
https://support.f5.com/csp/article/K65292843


944173-4 : SSL monitor stuck does not change TLS version

Links to More Info: BT944173

Component: Local Traffic Manager

Symptoms:
The SSL monitor remains in the current TLS version and does not switch to another version when a server changes.

Conditions:
-- SSL monitor configured.
-- Server configuration changes from TLSv1.2 to TLSv1.

Impact:
Pool members marked down.

Workaround:
Use the In-TMM monitor.


943441-4 : Issues in verification of Bot Defense with F5 Anti-Bot Mobile SDK

Links to More Info: BT943441

Component: Application Security Manager

Symptoms:
Verification may be incomplete when using the F5 Anti-Bot Mobile SDK with the Bot Defense profile.

Conditions:
-- Using the Bot Defense profile together with the F5 Anti-Bot Mobile SDK.
-- Enabling the Mobile Applications section in the profile.

Impact:
Mobile application verification may be incomplete.

Workaround:
None


942217-6 : Virtual server keeps rejecting connections for rstcause 'VIP down' even though virtual status is 'available'

Links to More Info: BT942217

Component: Local Traffic Manager

Symptoms:
With certain configurations, virtual server keeps rejecting connections for rstcause 'VIP down' after 'trigger' events.

Conditions:
Required Configuration:

-- On the virtual server, the service-down-immediate-action is set to 'reset' or 'drop'.

-- The pool member has rate-limit enabled.

Required Conditions:

-- Monitor flap, or adding/removing monitor or configuration change made with service-down-immediate-action.

-- At that time, one of the above events occur, the pool member's rate-limit is active.

Impact:
Virtual server keeps rejecting connections.

Workaround:
Delete one of the conditions.

Note: The affected virtual server may automatically recover upon the subsequent monitor flap, etc., if no rate-limit is activated at that time.


941961-4 : Upgrading system using WAM TCP profiles may prevent the configuration from loading

Links to More Info: BT941961

Component: WebAccelerator

Symptoms:
If a BIG-IP is on version 13.1.0 through 15.1.x and has profiles in use that use wam-tcp-wan-optimized and/or wam-tcp-lan-optimized as parent profiles, then when the configuration is upgraded to 16.0.0, the configuration fails to load, with an error similar to:

err mcpd[10087]: 01020036:3: The requested parent profile (/Common/wam-tcp-wan-optimized) was not found.

Conditions:
-- Upgrading from version 13.1.0 through 15.1.x.
-- Using profiles derived from wam-tcp-wan-optimized and/or wam-tcp-lan-optimized.

Impact:
Configuration does not load.

Workaround:
Remove these profiles and adjust the configuration elements that use them accordingly.

Here are two examples:

-- Copy the definition of 'wam-tcp-wan-optimized' from /defaults/wam_base.conf into /config/bigip.conf, and then reload the configuration.

-- Change the references to wam-tcp-wan-optimized to something else in your config file (e.g., tcp-wan-optimized), and then reload the configuration.


941773-1 : Video resolution mis-prediction

Links to More Info: BT941773

Component: Traffic Classification Engine

Symptoms:
Certain video traffic is not getting classified with high accuracy.

Conditions:
- Behavioral classifier for Classification Engine is enabled

Impact:
- Mis-predictions can lead to higher definition videos being categorized as low-definition videos and vice versa.


941765-1 : Video resolution mis-predictions

Links to More Info: BT941765

Component: Traffic Classification Engine

Symptoms:
BIG-IP's traffic playback resolution prediction is calculated on all individual connections of a client's video stream.

Conditions:
- Video streaming client downloads through BIG-IP
- Video is downloaded using multiple connections.

Impact:
- Mis-prediction in the video resolution.


940837-4 : The iRule command node is not triggered in CLIENT_ACCEPTED with HTTP/2.

Links to More Info: BT940837

Component: Local Traffic Manager

Symptoms:
The node iRule command causes the specified server node to be used directly, thus bypassing any load-balancing. However, with HTTP/2, the node command may fail to execute within the CLIENT_ACCEPTED event. This results in no traffic being sent to configured node.

Conditions:
-- A node command is used under CLIENT_ACCEPTED event.
-- An HTTP/2 profile applied to virtual server.
-- The HTTP/2 protocol in use.

Impact:
With HTTP/2 configured, the iRule node command fails to execute within the CLIENT_ACCEPTED event, causing no traffic to be sent to the desired node.

Workaround:
As a workaround, you may use HTTP_REQUEST event instead of CLIENT_ACCEPTED in iRule syntax.


940733-5 : Downgrading a FIPS-enabled BIG-IP system or running big3d_install results in a system halt

Links to More Info: BT940733

Component: Global Traffic Manager (DNS)

Symptoms:
The system fails during the boot-up process, reports a libcrypto validation error, and the system halts. The console will show this error:

Power-up self-test failures:
OpenSSL: Integrity test failed for libcrypto.so

This occurs after one of the following:
-- Upgrading a FIPS-enabled BIG-IP system, booting to a volume running an earlier software version
-- Running big3d_install from a BIG-IP GTM configuration to a BIG-IP LTM


On a FIPS-licensed BIG-IP LTM configuration, when checking the big3d version you may see something similar to this:

 /shared/bin/big3d -V
fips.c:204:f5_get_library_path: failed to dlopen libcrypto.so.1.0.2za
./big3d version big3d Version 17.0.0.0.0.22 for linux

Conditions:
-- FIPS-licensed BIG-IP system.
-- Upgrade.
-- Boot into a volume running an earlier version of the software.

Another way to encounter the issue is:

-- FIPS-licensed BIG-IP LTM.
-- BIG-IP DNS (GTM) device running a higher software version than the LTM.
-- Run big3d_install from a BIG-IP GTM-configuration pointing to FIPS-licensed BIG-IP LTM configuration.

Impact:
System boots to a halted state or big3d may continuously restart.

Workaround:
Before booting to the volume with the earlier version, delete /shared/bin/big3d.

Note: This issue might have ramifications for DNS/GTM support. DNS/GTM is not FIPS-certified.

If the target software volume has already experienced this issue (the system boots to a halted state), addition to deleting /shared/bin/big3d, follow the instructions in K25205233: BIG-IP System halted while booting. Halt at boot after FIPS Integrity Check Result FAIL :: https://support.f5.com/csp/article/K25205233 .

For additional information, see K29290121: Rollback after upgrade or big3d_install may cause FIPS to halt system on boot :: https://support.f5.com/csp/article/K29290121.


939933-7 : Monpd restarts every few seconds due to missing of AVR database

Component: Application Visibility and Reporting

Symptoms:
The database was not created by monpd, because the ‘init_avrdb’ file was not under the /var/avr.

Conditions:
The monpd is down after booting into HD1.2 on 2 slots.

Impact:
Clearing AVR database will remove all existing statistics data.

Workaround:
1. Stop monpd: bigstart stop monpd
2. Clean data base: touch /var/avr/init_avrdb
3. Clean the statistics file are waiting to be loaded:
   cd /var/avr/loader
   rm -rf *
4. Start monpd: bigstart start monpd


939249-1 : iSeries LCD changes to secure mode after multiple reboots

Links to More Info: BT939249

Component: TMOS

Symptoms:
After repeatedly rebooting an iSeries platform, the LCD can become erroneously set to secure mode on its own, and you are unable to use the menus on the LCD.

Conditions:
-- Repeated reboots of the device.
-- The db lcd.showmenu value initially set to enable are required.
-- Other required conditions are not fully known.

Impact:
-- LCD becomes set to secure mode.
-- The bigdb variable lcd.showmenu is changed to 'disable'.

Workaround:
Run the commands:
tmsh modify sys db lcd.showmenu value disable
tmsh modify sys db lcd.showmenu value enable

This clears the secure mode of the LCD.


938545-1 : Oversize plugin Tcl object results can result in 0-length messages and plugin crash

Links to More Info: BT938545

Component: Local Traffic Manager

Symptoms:
Bd crashes.

Conditions:
-- ASM enabled.
-- iRule used.
-- Command arguments are greater than maximum MPI message size.

Impact:
ASM traffic disrupted while bd restarts.

Workaround:
None.


938145-3 : DAG redirects packets to non-existent tmm

Links to More Info: BT938145

Component: TMOS

Symptoms:
-- Connections to self-IP addresses may fail.
-- SYNs packets arrive but are never directed to the Linux host.

Conditions:
-- Provision as vCMP dedicated host.
-- Create a self-IP address with appropriate allow-service.

Impact:
Repeated attempts to connect to the self-IP (e.g., via ssh) fail.

Workaround:
None


937649-4 : Flow fwd broken with statemirror.verify enabled and source-port preserve strict

Links to More Info: BT937649

Component: Local Traffic Manager

Symptoms:
Flow forwarding does not work with statemirror.verify enabled and source-port is preserve strict. Depending on the number of tmms and the IP addresses/ports on the network, this causes return traffic to get dropped.

Traffic captures show packets leaving the BIG-IP system on one tmm and being returned on another. The return traffic that encounters the second tmm is dropped.

Conditions:
-- Mirroring is enabled.
-- High availability (HA) peer is connected.
-- The source-port setting is preserve-strict.
-- The statemirror.verify option is enabled.
-- There is more than one tmm.

Impact:
Server-side return traffic to the BIG-IP is dropped. This causes connection timeouts and resets.

Workaround:
-- Disable statemirror.verify, disable source-port preserve-strict, disable mirroring.

-- On BIG-IP Virtual Edition (VE), add the following to tmm_init.tcl on both units and restart tmm:
 ndal ignore_hw_dag yes


937573-1 : Connections drop in virtual server with Immediate Action On Service Down set to Drop

Links to More Info: BT937573

Component: Local Traffic Manager

Symptoms:
In a virtual server configured with Immediate Action On Service Down set to Drop and an iRule to pick a pool different from the one attached to the virtual server, if the default pool is attached in an offline state, connections are always dropped even when the default pool becomes available later.

Conditions:
- Virtual server configured with Immediate Action On Service Down set to Drop.
- An iRule selects a different pool from the one attached to the virtual server.

Impact:
Connections are silently dropped.

Workaround:
Change the virtual server's Immediate Action On Service Down setting to None.


937541-4 : Wrong display of signature references in violation details

Links to More Info: BT937541

Component: Application Security Manager

Symptoms:
The number '1' is added to the signature reference in violation details in the Request Log.

Conditions:
You click the '?' icon near signature name to view signature details and there are references for this signature

Impact:
The number 1 is shown before the link


937481-5 : Tomcat restarts with error java.lang.OutOfMemoryError

Links to More Info: BT937481

Component: TMOS

Symptoms:
In the GUI, while trying to list a large configuration, tomcat restarts with error java.lang.OutOfMemoryError: Java heap space due to a large read operation.

Conditions:
-- From the GUI, navigate to Local Traffic :: Pools :: Pool List.
-- The configuration contains approximately 10,000 objects (objects include pools, nodes, virtual servers, etc.).

Impact:
When the system attempts to list the large configuration, tomcat restarts, resulting in 503 error.

Workaround:
Use the provision.tomcat.extramb database variable to increase the maximum amount of Java virtual memory available to the tomcat process.

Impact of workaround: Allocating additional memory to Apache Tomcat may impact the performance and stability of the BIG-IP system. You should perform this procedure only when directed by F5 Technical Support after considering the impact to Linux host memory resources.

-- Using a utility such as free or top, determine if you have enough free memory available to use this procedure.

For example, the following output from the free utility shows 686844 kilobytes available:
total used free shared buffers cachedMem:
16472868 15786024 686844 807340 827748 2543836
-/+ buffers/cache: 12414440 4058428
Swap: 1023996 0 1023996

-- View the current amount of memory allocated to the tomcat process by typing one of the following commands:
ps | grep " -client" | egrep -o Xmx'[0-9]{1,5}m'

The command output appears similar to the following example:

Xmx260m
Xmx260m

-- View the current value of the provision.tomcat.extramb database variable by typing the following command
tmsh list /sys db provision.tomcat.extramb

-- Set the provision.tomcat.extramb database variable to the desired amount of additional memory to be allocated using the following command syntax:
modify /sys db provision.tomcat.extramb value <MB>

-- If the device is part of a high availability (HA) configuration, the provision.tomcat.extramb database value should be synchronized to the peer devices from the command line. To run the ConfigSync process, use the following command syntax:
tmsh run /cm config-sync <sync_direction> <sync_group>

For example, the following command pushes the local device's configuration to remote devices in the Syncfailover device group:

tmsh run /cm config-sync to-group Syncfailover

-- Restart the tomcat process by typing the following command:
restart /sys service tomcat


936777-1 : Old local config is synced to other devices in the sync group.

Links to More Info: BT936777

Component: Global Traffic Manager (DNS)

Symptoms:
Newly added DNS/GTM device may sync old local config to other devices in the sync group.

Conditions:
Newly added DNS/GTM device has a more recent change than other devices in the sync group.

Impact:
Config on other DNS/GTM devices in the sync group are lost.

Workaround:
You can use either of the following workarounds:

-- Make a small DNS/GTM configuration change before adding new devices to the sync group.

-- Make a small DNS/GTM configuration change on the newly added device to re-sync the correct config to other DNS/GTM devices.


936417-4 : DNS/GTM daemon big3d does not accept ECDH or DH ciphers

Links to More Info: BT936417

Component: Global Traffic Manager (DNS)

Symptoms:
The DNS/GTM big3d daemon does not accept ECDH or DH ciphers.

Conditions:
Connections to big3d with ECDH or DH ciphers.

Impact:
ECDH/DH ciphers do not work with big3d.

Workaround:
Re-generate big3d cert and key with EC parameters.


936361-2 : IPv6-based bind (named) views do not work

Links to More Info: BT936361

Component: Global Traffic Manager (DNS)

Symptoms:
Bind does not match IPv6 addresses configured for a zone view, and returns REFUSED responses, rather than the
expected answers.

After enabling debug logging in bind (see K14680), the apparent source address of the IPv6 DNS requests shows as being in the fe80::/96 range, rather than the IPv6 source address that sent the request.

For example:

debug 1: client @0x579bf188 fe80::201:23ff:fe45:6701%10#4299: no matching view in class 'IN'

Conditions:
- BIG-IP DNS is provsioned
- One or more ZoneRunner views is defined using IPv6 addresses.
- A DNS query is sent from an IPv6 source address

Impact:
You cannot use DNS views in bind (zonerunner) based on IPv6 addresses.

Workaround:
If possible, use only IPv4 addresses to define views for DNS queries


936093-5 : Non-empty fipserr files loaded from a UCS archive can cause a FIPS BIG-IP platform to remain offline

Links to More Info: BT936093

Component: TMOS

Symptoms:
Loading a UCS file with non-empty fipserr files can cause a FIPS-based system to remain offline.

Conditions:
-- Using a BIG-IP with a Platform FIPS license.
-- Loading a UCS file with a non-empty fipserr file.

Impact:
System is completely offline with spurious 'fipserr' failures, even after loading the UCS file.

Workaround:
Before creating a UCS archive, truncate the following files so they have zero size:

/config/f5_public/fipserr
/var/named/config/f5_public/fipserr
/var/dnscached/config/f5_public/fipserr

This can be accomplished using a command such as:

truncate -c -s0 /config/f5_public/fipserr /var/named/config/f5_public/fipserr /var/dnscached/config/f5_public/fipserr


935945-2 : GTM HTTP/HTTPS monitors cannot be modified via GUI

Links to More Info: BT935945

Component: Global Traffic Manager (DNS)

Symptoms:
GUI reports an error when modifying DNS/GTM HTTP/HTTPS monitors:

01020036:3: The requested monitor parameter (/Common/http-default 2 RECV_STATUS_CODE=) was not found.

Conditions:
RECV_STATUS_CODE has never been set for the DNS/GTM HTTP/HTTPS monitors.

Impact:
Not able to make changes to DNS/GTM HTTP/HTTPS monitors through GUI.

Workaround:
If 'recv-status-code' has never been set, use tmsh instead.

Note: You can set 'recv-status-code' using tmsh, for example:

   tmsh modify gtm monitor http http-default recv-status-code 200


935769-5 : Upgrading / Rebooting BIG-IP with huge address-list configuration takes a long time

Links to More Info: BT935769

Component: Advanced Firewall Manager

Symptoms:
Version upgrade takes more time than usual when the config contains address-lists with a lot of IP addresses. The same delay will be observed with 'tmsh load sys config' as well.

Conditions:
-- Configure address-list with 10K to 20K IP addresses or address ranges or subnets.
-- Attempt upgrade / reboot of the platform.

Impact:
Version upgrade / 'tmsh load sys config' process takes a long time than usual.

Workaround:
1) Convert continuous individual addresses in the address-lists to IP address ranges and subnets if possible.

2) Remove the huge address-lists from config before the upgrade and add back after the upgrade process is finished.


935485-4 : BWC: flows might stall when using dynamic BWC policy

Links to More Info: BT935485

Component: TMOS

Symptoms:
When multiple flows are passing through the single instance of BWC policy, one or more flows might stall for a few seconds or more. The fairness among the flows is also affected.

Conditions:
-- BWC dynamic policy is enabled.
-- Multiple flows are passing through a single instance of the BWC dynamic policy.

Impact:
Some of the flows may stall.

Workaround:
None.


935193-4 : With APM and AFM provisioned, single logout ( SLO ) fails

Links to More Info: BT935193

Component: Local Traffic Manager

Symptoms:
SAML Single log out (SLO) fails on BIG-IP platforms. The SAML module on the BIG-IP system reports following error messages:

-- SAML SSO: Error (12) Inflating SAML Single Logout Request
-- SAML SSO: Error (12) decoding SLO message
-- SAML SSO: Error (12) extracting SAML SLO message

Conditions:
Failures occur with Redirect SLO.

Impact:
SAML single logout does not work.

Workaround:
Use POST binding SLO requests.


934825-2 : Restarting MCPD via command line may not restart the aced process

Links to More Info: BT934825

Component: Access Policy Manager

Symptoms:
Configurations with secure ID authentication may face issues after restarting MCPD using the command line (bigstart restart mcpd).

Conditions:
Executing the "bigstart restart mcpd" from command line does not always restart the aced process.

Impact:
Configurations with secure ID authentication may face issues after restarting MCPD and may not restart the aced process.

Workaround:
"bigstart restart mcpd" is not the recommended way to restart MCPD. Please restart the BIG-IP system to reflect any changes you have made.


934133-3 : Unable to Create/delete ltm virtual server via CLI transaction when destination is not specified on the ltm virtual object

Links to More Info: BT934133

Component: TMOS

Symptoms:
A CLI transaction fails with an error:

transaction failed: 0107028f:3: The destination (::) address and mask (255.255.255.255) for virtual server (/Common/foo) must be be the same type (IPv4 or IPv6).

Conditions:
-- A CLI transaction is used to create or delete a virtual server
-- When destination is not specified.
-- The virtual server references a traffic matching criteria

Impact:
The transaction fails with error and the virtual server is not created/deleted.

Workaround:
None


933777-5 : Context use and syntax changes clarification

Links to More Info: BT933777

Component: Application Visibility and Reporting

Symptoms:
There are two context and syntax-related issues:

-- In v14.x, the context for tmsh analytics commands related to server side connections changed. For example, 'total-server-side-conns' became a simple 'server-side-conns'.

-- In v13.x and 14.x, the calculation method for 'max-tps' changed from cumulative to commutative.

Conditions:
This occurs in either of the following scenarios:
-- Using tmsh analytics commands related to max-tps in v13.x or later.
-- Using tmsh analytics commands related to server side connections in BIG-IP v14.x and later.

Impact:
Stats names do not reflect their actual values. The 'max-tps' value is no longer valid for client IP context. These changes might have varied impacts, depending on your configuration.

Workaround:
None


933597-5 : Mandatory arguments missing in tmsh security protocol-inspection profile help

Links to More Info: BT933597

Component: TMOS

Symptoms:
Missing mandatory arguments for tmsh security protocol-inspection profile command list.

Conditions:
Profile - Configures the protocol inspection profiles
Module - security protocol-inspection profile

Impact:
Tmsh does not specify the mandatory arguments, which makes it difficult to write any script or automate the tmsh command around this security profile.

Workaround:
Specify the following arguments for this profile:

-- Ports


932553-6 : An HTTP request is not served when a remote logging server is down

Links to More Info: BT932553

Component: Local Traffic Manager

Symptoms:
BIG-IP systems provide an option to sanitize HTTP traffic via the http_security profile. When the profile is configured to alarm on a violation, it is possible that a connection to the violating client is reset if a remote logging server is marked down.

Conditions:
-- A BIG-IP system has an HTTP profile and and an http_security profile with the alarm option set.
-- A remote logging server is configured via a BIG-IP pool.
-- The pool has a monitor that marks all the pool members down.
-- A request with an HTTP violation is processed and triggers an alarm configured in the http_security profile.

Impact:
-- A TCP connection to a client is reset by the BIG-IP system.
-- The web page may not render, or may not render as expected.
-- Data are not delivered to a server with a POST request.

Workaround:
None.


932485-5 : Incorrect sum(hits_count) value in aggregate tables

Links to More Info: BT932485

Component: Application Visibility and Reporting

Symptoms:
If the results gathered for sum(hits_count) are very large (e.g., 15000300000), the system does not report the correct values in the AVR tables.

Conditions:
-- Insert a very large amount of data (approximately 4.5 milliard or more) to one of AVR tables.
-- Review the value of the sum(hits_count) column.

Impact:
The system reports incorrect values in AVR tables when dealing with large numbers

Workaround:
None.


932461-5 : Cert update on server SSL profile on HTTPS monitor: BIG-IP not using the updated certificate.

Links to More Info: BT932461

Component: Local Traffic Manager

Symptoms:
If you overwrite the certificate that is configured on the server SSL profile and used with the HTTPS monitor, the BIG-IP system still uses an old certificate.

After you update the certificate, the stored certificate is incremented, but monitor logging indicates it is still using the old certificate.

Conditions:
--Create a pool with an HTTPS pool member.
--Create an HTTPS monitor with cert and key.
--Assign the HTTPS monitor to the HTTPS pool.
--Update the certificate via GUI or tmsh.

Impact:
The monitor still tries to use the old certificate, even after the update.

Workaround:
Use either of the following workarounds:

-- Restart bigd:
bigstart restart bigd

-- Modify the server SSL profile cert key, set it to 'none', and switch back to the original cert key name.

The bigd utility successfully loads the new certificate file.


932189-1 : Incorrect BD Swap Size units on ASM Resources chart

Links to More Info: BT932189

Component: Application Visibility and Reporting

Symptoms:
The 'BD Swap Size' reported on the 'Security :: Reporting : ASM Resources : Memory Utilization' page is much too high and incorrect.

Conditions:
ASM provisioned.

Impact:
Graphically reported BD swap memory usage is incorrect.

Workaround:
None.


931797-3 : LTM virtual address netmask does not persist after a reboot

Links to More Info: BT931797

Component: TMOS

Symptoms:
The virtual address netmask is missing after the system reboots.

Conditions:
When referencing an "ltm traffic-matching-criteria" object from the virtual server.

Impact:
Netmask address is set to 'any' after the system reboots.

Workaround:
None


931149-3 : Some RESOLV::lookup queries, including PTR lookups for RFC1918 addresses, return empty strings

Links to More Info: BT931149

Component: Global Traffic Manager (DNS)

Symptoms:
RESOLV::lookup returns an empty string.

Conditions:
The name being looked up falls into one of these categories:

-- Forward DNS lookups in these zones:
    - localhost
    - onion
    - test
    - invalid

-- Reverse DNS lookups for:
    - 127.0.0.0/8
    - ::1
    - 10.0.0.0/8
    - 172.16.0.0/12
    - 192.168.0.0/16
    - 0.0.0.0/8
    - 169.254.0.0/16
    - 192.0.2.0/24
    - 198.51.100.0/24
    - 203.0.113.0/24
    - 255.255.255.255/32
    - 100.64.0.0/10
    - fd00::/8
    - fe80::/10
    - 2001:db8::/32
    - ::/64

Impact:
RESOLV::lookup fails.

Workaround:
Use a DNS Resolver ('net dns') and RESOLVER::name_lookup / DNSMSG:: instead of RESOLV::lookup:

1. Configure a local 'net dns' resolver, replacing '192.88.99.1' with the IP address of your DNS resolver:

    tmsh create net dns-resolver resolver-for-irules answer-default-zones no forward-zones add { . { nameservers add { 192.88.99.1:53 } } }

2. Use an iRule procedure similar to this to perform PTR lookups for IPv4 addresses:

proc resolv_ptr_v4 { addr_v4 } {
    # Convert $addr_v4 into its constituent bytes
    set ret [scan $addr_v4 {%d.%d.%d.%d} a b c d]
    if { $ret != 4 } {
        return
    }

    # Perform a PTR lookup on the IP address $addr_v4, and return the first answer
    set ret [RESOLVER::name_lookup "/Common/resolver-for-irules" "$d.$c.$b.$a.in-addr.arpa" PTR]
    set ret [lindex [DNSMSG::section $ret answer] 0]
    if { $ret eq "" } {
        # log local0.warn "DNS PTR lookup for $addr_v4 failed."
        return
    }

    # Last element in '1.1.1.10.in-addr.arpa. 600 IN PTR otters.example.com'
    return [lindex $ret end]
}

-- In an iRule, instead of:
    RESOLV::lookup @192.88.9.1 $ipv4_addr
Use:
    call resolv_ptr_v4 $ipv4_addr


930625-1 : TMM crash is seen due to double free in SAML flow

Links to More Info: BT930625

Component: Access Policy Manager

Symptoms:
When this issue occurs the TMM will crash

Conditions:
Exact reproduction steps are not known but it occurs during SAML transactions

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


930393-2 : IPsec tunnel does not start after an upgrade, first configuration, or reconfiguration

Links to More Info: BT930393

Component: TMOS

Symptoms:
-- IPsec tunnel does not start.
-- Remote IPsec networks unavailable.

Conditions:
-- Using IKEv1 and one of the following:
   + Performing an upgrade.
   + IPsec tunnel reconfiguration generally involving a change to, or addition of, a traffic-selector.

Impact:
IPsec tunnel is down permanently.

Workaround:
-- Reconfigure or delete and re-create the traffic selectors associated with the IPsec tunnel that does not start.

Special Notes:
-- This occurs rarely and does not happen spontaneously, without intentional changes (reconfiguration or upgrade).
-- A BIG-IP reboot or a restart of tmipsecd does not resolve this condition.
-- This symptom might also occur due to a genuine misconfiguration.
-- After major version upgrades, default ciphers can change, double-check the encryption and authentication ciphers for the tunnel.


930217-1 : Zone colors in ASM swap usage graph are incorrect

Links to More Info: BT930217

Component: Application Visibility and Reporting

Symptoms:
In GUI ASM memory utilization chart, 'BD swap size, Total swap size' graph show inconsistent background colors. It looks like these colors are assigned with an assumption that swap usage is shown as percentage but it is shown as absolute value.

Conditions:
-- ASM is provisioned.
-- Viewing ASM memory utilization chart/

Impact:
Potential confusion viewing colors in ASM memory utilization chart.

Workaround:
None. This is a cosmetic issue only.


929913-3 : External DNS logging does not differentiate between: all src_IP, Per-SrcIP and Per-DstIP events

Links to More Info: BT929913

Component: Advanced Firewall Manager

Symptoms:
DNS logs on LTM side do not print the all src_IP, per-srcIP, etc.

Conditions:
-- DNS logging is enabled
-- A DNS flood is detected

Impact:
Some information related to DNS attack event is missing such as src_IP, Per-SrcIP and Per-DstIP events.


929429-8 : Oracle/SQL database monitor uses excessive CPU when Platform FIPS is licensed

Links to More Info: BT929429

Component: Local Traffic Manager

Symptoms:
Whenever you create Oracle or SQL (mssql, mysql or postgresql) database monitors, and add a member to the monitor, every time the OpenSSL libraries are loaded for a new connection, high CPU usage occurs.

Conditions:
-- Create an Oracle or SQL database LTM monitor.
-- Add a pool member to the Oracle or SQL database monitor created.
-- Platform FIPS is licensed.

Impact:
High CPU Usage due to the loading of libraries whenever new connection is created.

Workaround:
None.


929173-3 : Watchdog reset due to CPU stall detected by rcu_sched

Links to More Info: BT929173

Component: TMOS

Symptoms:
Rcu_sched detected CPU stall, which can cause vCMP host reboot. The device reboots without core and records "Host Watchdog timeout."

Typically there will logs in kern.log similar to:
err kernel: : [526684.876928] INFO: rcu_sched detected stalls on CPUs/tasks: ...

Conditions:
Host undergoing a watchdog reset in a vCMP environment.

Impact:
CPU RCU stalls and host watchdog reboots


929133-6 : TMM continually restarts with errors 'invalid index from net device' and 'device_init failed'

Links to More Info: BT929133

Component: TMOS

Symptoms:
VLANs with a name that that start with "eth" will cause tmm to fail and restart.

Conditions:
Vlan name that starts with "eth"

Impact:
Since tmm fails to start, the BIG-IP cannot serve traffic.

Workaround:
Rename all vlans that start with "eth"


929077-4 : Bot Defense allow list does not apply when using default Route Domain and XFF header

Links to More Info: BT929077

Component: Application Security Manager

Symptoms:
When configuring an IP address allow list in Bot Defense Profile, using a default Route Domain, and a request with an X-Forwarded-For header the request might not be added to the allow list.

Conditions:
-- Bot Defense Profile is attached to virtual server.
-- Bot Defense Profile has an IP address allow list configured.
-- Using default Route Domain.
-- Sending a request with X-Forwarded-For header.
-- Might require heavy traffic.

Impact:
Request from an IP address that is on the allow list is blocked.

Workaround:
Allow the IP address using an iRule.


928997-3 : Less XML memory allocated during ASM startup

Links to More Info: BT928997

Component: Application Security Manager

Symptoms:
Smaller total_xml_memory is selected during ASM startup.

For example, platforms with 32GiB or more RAM should give ASM 1GiB of XML memory, but it gives 450MiB only. Platform with 16MiB should give ASM 450MiB but it gives 300MiB.

Conditions:
Platforms with 16GiB, 32GiB, or more RAM

Impact:
Less XML memory allocated

Workaround:
Use this ASM internal parameter to increase XML memory size.

additional_xml_memory_in_mb

For more details, refer to the https://support.f5.com/csp/article/K10803 article.


928665-4 : Kernel nf_conntrack table might get full with large configurations.

Links to More Info: BT928665

Component: TMOS

Symptoms:
Linux host connections are unreliable, and you see warning messages in /var/log/kern.log:

warning kernel: : [182365.380925] nf_conntrack: table full, dropping packet.

Conditions:
This can occur during normal operation for configurations with a large number of monitors, for example, 15,000 or more active entries.

Impact:
Monitors are unstable/not working at all.

Workaround:
1. Modify /etc/modprobe.d/f5-platform-el7-conntrack-default.conf
increasing the hashsize value:

options nf_conntrack hashsize=262144

2. Save the file.
3. Reboot the system.


928445-5 : HTTPS monitor is down when server_ssl profile cipher string is configured to TLSv1_2

Links to More Info: BT928445

Component: Local Traffic Manager

Symptoms:
HTTPS monitor state is down when server_ssl profile cipher string has the value 'TLSv1_2'.
 -- configured cipherstring TLSv1_2/TLSv1_1 is rejected by OpenSSL.

Conditions:
-- Pool member is attached with HTTPS monitor.
-- Monitor is configured with an SSL profile.
-- The configured server_ssl profile has cipher string as DEFAULT:!TLSv1_2.

Impact:
Pool status is down.

Workaround:
-- Enable 'in-tmm' monitoring.
-- Use SSL options available in the server SSL profile to disable TLSv1_2 or TLSv1_1 instead of cipher string.
-- Use the same cipher string with cipher group / cipher rule that is attached to the SSL profile.


928353-4 : Error logged installing Engineering Hotfix: Argument isn't numeric

Links to More Info: BT928353

Component: TMOS

Symptoms:
When installing an Engineering Hotfix, the following error may be logged in /var/log/liveinstall.log:

Argument "" isn't numeric in numeric eq (==) at /var/tmp/install/pkgcpio/usr/local/lib/tm_install/Hotfix.pm line 651.

Conditions:
This error may occur when installing an Engineering Hotfix, if the Engineering Hotfix does not include an update to the nash-initrd component.

Impact:
The error message gives a mistaken impression that the Engineering Hotfix did not install successfully. However, it does install correctly, and the system operates without issue. You can safely ignore this message.

Workaround:
None.


927633-4 : Failure path in external datagroup internal mapping operation failure may result in 'entry != NULL' panic

Links to More Info: BT927633

Component: Local Traffic Manager

Symptoms:
Log messages written to /var/log/ltm:
-- notice tmm2[30394]: 01010259:5: External Datagroup (/Common/dg1) queued for update.
-- notice panic: ../kern/sys.c:1081: Assertion "entry != NULL" failed.

Conditions:
-- Create datagroups.
-- Some condition causes a datagroup to not be present (e.g., delete, rename operations, or another, internal operation).
-- Load the config.

Impact:
Internal mapping of external datagroup fails. Datagroup creation fails.

Workaround:
None.


927589-1 : ILX::call command response get truncated

Links to More Info: BT927589

Component: Local Traffic Manager

Symptoms:
If a response to an ILX::call command is larger than 64 KB, data is truncated.

Conditions:
-- iRule script including an ILX::call command in use.
-- Return response is greater than 64 KB.

Impact:
iRule fails and the connection aborts.

Workaround:
None.


927441-5 : Guest user not able to see virtual server details when ASM policy attached

Links to More Info: BT927441

Component: TMOS

Symptoms:
When ASM is attached to a Virtual Server, a BIG-IP user account configured with the Guest role cannot see virtual server details. An error message is printed instead:
01070823:3: Read Access Denied: user (guestuser) type (GTM virtual score).

Conditions:
-- ASM Policy attached to virtual server.
-- Logging onto the BIG-IP system using an account configured with the guest user role.
-- Running the command:
tmsh show ltm virtual detail

Impact:
Cannot view virtual server details.

Workaround:
None.


927025-1 : Sod restarts continuously

Links to More Info: BT927025

Component: TMOS

Symptoms:
After upgrading to v14.1.2.6, sod keeps restarting and dumping core.

Conditions:
This occurs when /dev/shm/chmand is missing and the system restarts chmand and sod upon reload.

Note: It is unknown how this condition might occur.

Impact:
Unstable sod process can affect failover functionality in BIG-IP systems.

Note: This happens only the first time after upgrade. To recover, you must power down the system for a full reboot.

Workaround:
Run the following command:

restorecon /dev/shm/chmand


926549-3 : AFM rule loops when 'Send to Virtual' is used with Virtual Server iRule 'LB::reselect'

Links to More Info: BT926549

Component: Advanced Firewall Manager

Symptoms:
With some configurations, executing a command such as 'tmsh show security firewall global-rules active' loops continuously, causing stat counters to rise, and possibly log messages to be written to /var/log/ltm.

Conditions:
-- AFM is routing traffic to a Virtual Server through the 'Send to Virtual' option.
-- The target Virtual Server uses the 'LB_FAILED' iRule to select a new Virtual Server through virtual command and 'LB::reselect'.

Impact:
The iRule loops continuously, causing stat counters to rise, and possibly logging messages in /var/log/ltm.

Workaround:
This configuration should be avoided, but if it is used, and if this does happen, you can restart tmm:
bigstart restart tmm

This stops the current looping, until it is triggered again.

Impact of workaround: Traffic disrupted while tmm restarts.


926425-4 : Hardware SYN Cookies may not deactivate after the SYN attack ends and valid TCP traffic starts

Links to More Info: BT926425

Component: Advanced Firewall Manager

Symptoms:
Hardware SYN Cookies activated on a virtual server under a SYN attack may not deactivate after the SYN attack ends and valid TCP traffic starts. The non-supported TCP options under SYN Cookie protection continue to be unsupported until hardware SYN cookies are disabled.

Conditions:
SYN Cookie activated on Neuron-capable platforms:
  + VIPRION B4450N blade
  + BIG-IP iSeries devices (ix800) except the i850, ix2800, and ix4800:
     -- BIG-IP i5800 Series
     -- BIG-IP i7800 Series
     -- BIG-IP i11800 Series
     -- BIG-IP i15800 Series

Impact:
This can successfully cause hardware SYN cookies to be activated on the BIG-IP virtual server under attack. However, once the attack subsides and falls below the SYN check threshold, SYN cookies may not immediately deactivate.

Because SYN cookie protection is still active, and because under SYN cookie protection some TCP options are not supported, the options are not taken into account when processing traffic. For example, under SYN cookie protection, MSS is fixed to a few sizes. For traffic that arrives with a different MSS size, the system uses a supported size instead.

Workaround:
You can use any of the following to clear the HSB issue:
-- Restart neurond.
-- Restart TMM,
-- Reboot the device.


926085-2 : In WebUI node or port monitor test is not possible, but it works in TMSH

Links to More Info: BT926085

Component: Local Traffic Manager

Symptoms:
When attempting to test a newly created Pool Member monitor, node address field is disabled, you cannot enter a node address. This prevents from using the Test operation to test this type of monitor in the WebUI.

Conditions:
-- Create a new Pool Member monitor (not a Node Address monitor). For example, HTTP, HTTPS, FTP, TCP, or Gateway ICMP.
-- With the monitor configuration displayed in the WebUI, click the Test tab.
-- View the Address field, and try to run the test.

Impact:
The Address field is disabled, with *.* in the field. You cannot enter a node address. The test fails with following message:

invalid monitor destination of *.*:80.
invalid monitor destination of *.*:443. (:port used to test)

Workaround:
Run either of the following TMSH commands:

-- tmsh run ltm monitor <type> <name> destination <IP address>:<port>
-- tmsh modify ltm monitor <type> <name> destination *:*

For example, for HTTP:
-- tmsh run ltm monitor http my_http destination <IP address>:<port>
-- tmsh modify ltm monitor http my_http destination *:*

For example, for HTTPS:
-- tmsh run ltm monitor https my_https destination <IP address>:<port>
-- tmsh modify ltm monitor https my_https destination *:*


925469-2 : SubjAltName (SAN) cannot be sent in the Certificate Order Manager for Comodo / Sectigo

Links to More Info: BT925469

Component: TMOS

Symptoms:
When using the Certificate Order Manager to request new Multi-Domain certificate from the Sectigo Certificate Authority (CA), the request the BIG-IP sends is missing the field 'subjectAltName'.

Conditions:
-- Certificate Order Manager is configured to send requests to the Comodo/Sectigo CA.

-- Configure a new key with Subject Alternative Name (SAN).

Impact:
The BIG-IP system sends a request to the Sectigo CA that is missing the 'subjectAltName' field. That makes Certificate Order Manager not suitable for requesting Multi-Domain certificates.

Workaround:
There is no workaround other than not using Certificate Order Manager for Multi-Domain certificates.


924589-3 : PEM ephemeral listeners with source-address-translation may not count subscriber data

Links to More Info: BT924589

Component: Policy Enforcement Manager

Symptoms:
When a PEM profile is associated with a protocol that can create dynamic server-side listeners (such as FTP), and source-address-translation is also enabled on the virtual server, traffic on that flow (for example ftp-data) is not associated with the subscriber, and is therefore not counted or categorized.

Conditions:
-- Listener configured with PEM and FTP profiles
-- Some form of source address translation is enabled on the listener (for example, SNAT, Automap, SNAT Pool)

Impact:
Inaccurate subscriber traffic reporting and classification.

Workaround:
None.


924297-4 : Ltm policy MCP objects are not being synced over to the peer device

Links to More Info: BT924297

Component: TMOS

Symptoms:
An LTM policy does not sync to the peer device, but the devices report "In Sync".

Conditions:
-- Sync/failover device group with full load on sync disabled
-- A draft policy is attached to a parent policy's rule actions and published.
-- A config sync occurs (manually or automatically)

Impact:
The LTM policy does not sync to the peer device.

Workaround:
Perform a full config sync:

tmsh run cm config-sync force-full-load-push to-group <device group name>


923821-1 : Captcha is not shown after successful CSI challenge when configured action is CSI followed by captcha in case of credential stuffing attack

Links to More Info: BT923821

Component: Application Security Manager

Symptoms:
When mitigated action is set to CSI followed by captcha for credential stuffing attack, captcha is not triggered even after successful CSI challenge.

Conditions:
1) Mitigated action is set to CSI followed by captcha for credential stuffing attack.
2) Credential stuffing attack occurs.
3) CSI challenge is success.

Impact:
Captcha is not triggered leading to less than configured mitigation action for credential stuffing attack.

Workaround:
None


922737-1 : TMM crash

Links to More Info: BT922737

Component: SSL Orchestrator

Symptoms:
TMM crashes with a sigsegv while passing traffic

Conditions:
Virtual server with a Connector profile that redirects to an internal virtual server on the same BIG-IP system

Impact:
Traffic disrupted while tmm restarts.


922641-6 : Any iRules that park in a clientside or serverside command leave the iRule attached to the wrong flow

Links to More Info: BT922641

Component: Local Traffic Manager

Symptoms:
iRule commands issued after a clientside or serverside command operate on the wrong peer flow.

Conditions:
An iRule contains a script that parks in a clientside or serverside command.

Examples of parking commands include 'table' and 'persist'.

Impact:
The iRule commands operate on the wrong peer flow.

Workaround:
Avoid using commands that park inside the clientside or serverside command.


922613-6 : Tunnels using autolasthop might drop traffic with ICMP route unreachable

Links to More Info: BT922613

Component: TMOS

Symptoms:
Traffic that should be encapsulated and sent via tunnel might get dropped with an ICMP error, destination unreachable, unreachable route. This happens in a scenario where no route exists towards the remote tunnel endpoint and the BIG-IP system relies on autolasthop to send the encapsulated traffic back to the other end of the tunnel.

Conditions:
No route exists to the other end of the tunnel.

Impact:
Traffic dropped with ICMP error, destination unreachable, unreachable route.

Workaround:
Create a route towards the other remote end of the tunnel.


922153-5 : Tcpdump is failing on tmm 0.x interfaces

Links to More Info: BT922153

Component: TMOS

Symptoms:
The tcpdump command exits immediately with an error:
 errbuf ERROR:TMM side closing: Aborted
tcpdump: pcap_loop: TMM side closing: Aborted

Conditions:
Capturing the packets on tmm interfaces.

Impact:
Unable to capture the packets on specific tmm interfaces.

Workaround:
There are two possible workarounds:

-- Start tcpdump on the tmm that actually owns the interface using the TCPDUMP_ADDR command; for example, using blade1 for 1/0.16, run the command:

TCPDUMP_ADDR=127.1.1.16 tcpdump -w testcap.pcap -s 0 -i 1/0.16


-- Send the TCPDUMP_ADDR command to a specific tmm, which could work from any blade (127.20.<slot>.<tmmnumber+1> (e.g. 127.20.1.1 == slot1/tmm0, 127.20.2.16 == slot2/tmm15):

TCPDUMP_ADDR=127.20.1.16 tcpdump -w testcap.pcap -s 0 -i 1/0.16


922053-1 : inaccurate number of trunk members reported by bcm56xxd/bcmLINK

Links to More Info: BT922053

Component: TMOS

Symptoms:
The "bcmLINK" process (sometimes referred to as "bcm56xxd") may fail with a segmentation fault and be restarted, leaving behind a core-dump file for "bcmLINK".

An error message may be logged about the condition "max_mbrs > 0".

Conditions:
-- occurs in multi-blade VIPRION system with trunked interfaces
-- precise trigger is not known

Impact:
Momentary disruption of traffic handling by TMM.

Workaround:
None known.


921993-1 : LTM policy with a 'contains' operator does not work as expected when using an external data group.

Links to More Info: BT921993

Component: Local Traffic Manager

Symptoms:
If a combination of other operators and the 'contains' operator are used in LTM Policy, searches might fail if the hashing-based operators have not populated the target entries.

Conditions:
-- LTM policy with 'contains' operator.
-- Use of external datagroups.

Impact:
LTM policy might not work as expected with external data groups.

Workaround:
Use either of the following workarounds:

-- If applicable, change the 'contains' operator to 'starts_with' in the policy.

-- Change the policy into an iRule (executing '[class get <datagroup]' )


921541-6 : When certain sized payloads are gzipped, the resulting payload is chunked, incorrect, and is never delivered to the client due to missing end of chunk marker.

Links to More Info: BT921541

Component: Local Traffic Manager

Symptoms:
The HTTP session initiated by curl hangs.

Conditions:
-- The problem occurs when the file to be compressed meets the following criteria:
-- The following platforms with Intel QAT are affected:
   + B4450N (A114)
   + i4000 (C115)
   + i10000 (C116/C127)
   + i7000 (C118)
   + i5000 (C119)
   + i11000 (C123)
   + i11000 (C124)
   + i15000 (D116)
-- File size to be compressed is less than compression.qat.dispatchsize.
-- File size to be compressed is one of specific numbers from this list: 65535, 32768, 16384, 8192, 4096.

Impact:
Connection hangs, times out, and resets.

Workaround:
Use software compression.


921149-6 : After applying static bandwidth controller on a virtual server, any changes to the virtual server disassociates the BWC policy

Links to More Info: BT921149

Component: TMOS

Symptoms:
All Bandwidth Controller (BWC) stats are 0 (zero) even though traffic is passing.

Conditions:
-- A BWC policy is attached to a virtual server.
-- The virtual server with the attached BWC policy is modified.

Impact:
The system disassociates the BWC policy from the virtual server. Traffic is no longer throttled according to the policy rules.

Workaround:
To reattach the policy, detach the Bandwidth Controller policy from the virtual server, and then reapply it.


920817-7 : Wide IP operations performed in quick succession result in missing resource records and out of sync journals.

Links to More Info: BT920817

Component: Global Traffic Manager (DNS)

Symptoms:
Two issues occur with Wide IP operations performed in quick succession:
1. DNS Zone syncing is missing resource records.
2. In some cases it throws named/zrd error: journal rollforward failed: journal out of sync with zone.

Conditions:
This issue can occur when a large number of configuration changes, including Wide IP changes, are made simultaneously on multiple GTM/DNS devices in a sync group.

Impact:
DNS resource records can be missing from the BIND DNS database.

The impact of this issue is that if GSLB Load Balancing falls back to BIND, the DNS resource records may not be present.
Manually remove the .jnl files in order to restore named/zrd on all GTMs.

Workaround:
Restrict configuration (Wide IP) changes to one GTM/DNS device in a device group.

Note: It is also possible to turn off zone syncing. GTM/DNS configuration is still synced, but you lose the ability to sync non-Wide IP changes to the BIND DB.
If you do not use ZoneRunner to add additional non-Wide IP records, this is only a problem when GSLB resorts fallback to BIND.
This can be mitigated with DNSX and DNS (off device) for non Wide IP Resource Records.

Manually remove the .jnl files in order to restore named/zrd on all GTMs.


918693-5 : Wide IP alias validation error during sync or config load

Links to More Info: BT918693

Component: Global Traffic Manager (DNS)

Symptoms:
DB validation exception occurs during GTM config sync or config load:

01070734:3: Configuration error: DB validation exception, unique constraint violation on table (gtm_wideip_alias) object ID (1 /Common/alias.test.com www.test.com). A duplicate value was received for a non-primary key unique index field. DB exception text (Cannot update_indexes/checkpoint DB object, class:gtm_wideip_alias status:13)
Unexpected Error: Loading configuration process failed.

Conditions:
-- A wideip alias is moved from one wideip to another
-- GTM sync occurs, or a gtm config is loaded manually.

This issue can occur any time a GTM config is loaded or synchronised where the new configuration has a wideip with an alias, which is already configured on a different wideip in the existing in-memory GTM configuration.

Impact:
You are unable to load config or full sync from peer GNS/GTM.

Workaround:
Follow this procedure:
1. Delete the wide IP alias on the destination device.
2. Try the sync or load config operation again.


917637-5 : Tmm crash with ICAP filter

Links to More Info: BT917637

Component: Service Provider

Symptoms:
Tmm crashes while passing traffic.

Conditions:
-- Per-request policies configured.
-- ICAP is configured.

This is rare condition that occurs intermittently.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


915493-6 : imish command hangs when ospfd is enabled

Links to More Info: BT915493

Component: TMOS

Symptoms:
Running the imish command hangs when ospfd is enabled.

Conditions:
-- Dynamic routing enabled.
-- The ospfd protocol is enabled.
-- Running the imish command.

Impact:
The imish operation hangs.

Workaround:
Restart the ospfd daemon.


915473-4 : Accessing Dashboard page with AVR provisioned causes continuous audit logs

Links to More Info: BT915473

Component: TMOS

Symptoms:
Navigating to Statistics :: Dashboard in the GUI with AVR or APM provisioned causes continuous audit logging and restjavad logs.

Conditions:
-- AVR provisioned
-- An administrator navigates to Statistics :: Dashboard.

Impact:
The continuous extra logs might lead to confusion and may not be helpful.

Workaround:
None.


915141-5 : Availability status of virtual server remains 'available' even after associated pool's availability becomes 'unknown'

Links to More Info: BT915141

Component: TMOS

Symptoms:
Availability status of virtual server can be left 'available' even if the corresponding pool's availability becomes 'unknown'.

Conditions:
- Pool member is configured as an FQDN node.
- You set monitor to 'none' with the pool.

Impact:
Inconsistent availability status of pool and virtual server.

Workaround:
Set the FQDN node to 'force offline', and then 'enable'. This triggers virtual server's status updates and syncs to pool.


915005-3 : AVR core files have unclear names

Links to More Info: BT915005

Component: Application Visibility and Reporting

Symptoms:
If avrd fails a core file created in this case is named accordung to the thread name and has no indication that it belongs to avr, for example: SENDER_HTTPS.bld0.0.9.core.gz

Conditions:
Avrd fails with a core

Impact:
It is inconvenient for identifying the process that caused the core.


913917-1 : Unable to save UCS

Links to More Info: BT913917

Component: Global Traffic Manager (DNS)

Symptoms:
You are unable to create a backup UCS.

You see a warning in /var/log/restjavad.0.log:

[WARNING][8100/tm/shared/sys/backup/306b4630-aa74-4a3d-af70-0d49bdd1d89e/worker UcsBackupTaskWorker] Failure with backup process 306b4630-aa74-4a3d-af70-0d49bdd1d89e.
This is followed by a list of some files in /var/named/config/namedb/.

Conditions:
Named has some Slave zones configured and is going through frequent zone transfer.

Impact:
You are unable to create a UCS file.

Workaround:
Stop named zone transfer while doing UCS backup.


913713-3 : Rebooting a blade causes MCPd to core as it rejoins the cluster

Links to More Info: BT913713

Component: TMOS

Symptoms:
Tmm and mcpd cores for slot2

Conditions:
On the standby chassis, reboot the primary blade and wait for it to rejoin the cluster. Once it does, mcpd will core.

Impact:
Traffic disrupted while tmm and mcpd mcpd restarts.

Workaround:
N/A


913013-1 : Racoon daemon may crash once at startup

Links to More Info: BT913013

Component: TMOS

Symptoms:
When the IKEv1 racoon daemon starts, it may immediately exit with a core file.

Conditions:
One of the following events may lead to the restart:
-- BIG-IP systems start or restart as a standalone device.
-- BIG-IP becomes the Active member of High Availability (HA) setup.

Impact:
Racoon restarts. Because this restart happens when racoon is trying to start, no IPsec IKEv1 tunnels are affected because they are down anyway.

Workaround:
None


912293-5 : Persistence might not work properly on virtual servers that utilize address lists

Links to More Info: BT912293

Component: Local Traffic Manager

Symptoms:
-- Connections to the virtual server might hang.
-- Increased tmm CPU utilization.

Conditions:
-- A virtual server is configured with a traffic-matching-criteria that utilizes a source-address-list and/or destination-address-list.

-- The virtual server utilizes certain persistence one of the following persistence types:
  + Source Address (but not hash-algorithm carp)
  + Destination Address (but not hash-algorithm carp)
  + Universal
  + Cookie (only cookie hash)
  + Host
  + SSL session
  + SIP
  + Hash (but not hash-algorithm carp)

Impact:
-- High tmm CPU utilization.
-- Stalled connections.

Workaround:
Enable match-across-virtuals in the persistence profile.

Note: Enabling match-across-virtuals might might affect the behavior of other virtual servers in the configuration that utilize persistence.


911497-1 : Unbound's backoff algorithm interacts badly with net resolver iRules

Links to More Info: BT911497

Component: Global Traffic Manager (DNS)

Symptoms:
Using RESOLVER::name_lookup in an iRule against a net resolver forward zone name server that happens to be down can result in the iRule pausing for up to a few minutes.

Conditions:
Nameserver configures as fwd-zone in net resolver should be down.

Impact:
The connection to the virtual server is paused for a significant amount of time.

Workaround:
Use a pool of dns-servers, and configure the pool to monitor the backend dns servers and load balance to healthy pool members.


911241-8 : The iqsyncer utility leaks memory for large bigip_gtm.conf file when log.gtm.level is set to debug

Links to More Info: BT911241

Component: Global Traffic Manager (DNS)

Symptoms:
The iqsyncer utility leaks memory.

Conditions:
-- There is a large bigip_gtm.conf.
-- The log.gtm.level is set to debug.

Impact:
The iqsyncer utility exhausts memory and is killed.

Workaround:
Do not set log.gtm.level equal to or higher than debug.


910777-1 : Sending ASM report via AWS SES failed duo to wrong content type

Links to More Info: BT910777

Component: Application Visibility and Reporting

Symptoms:
When you attempt to send an ASM report via AWS SES, the message bounces with the following message:
  Could not send e-mails: SMTP Error: data not accepted.; Transaction failed: Expected MIME type, got ;; Error code: 554.

This occurs because the BIG-IP system is sending out the report message with an empty Content-Type in the multipart MIME, which the AWS mail host cannot process.

Conditions:
This is encountered in the following scenario:
1. Set up SMTP and ASM schedule report.
2. Click Send Now, and get the error message in GUI.
3. SSH into the BIG-IP system.
4. Add this line under the following snippet:

[admin@bigip:Active:Standalone] ~ # chmod 644 /var/ts/dms/script/avrexport/avrmail.php
[admin@bigip:Active:Standalone] ~ # vi /var/ts/dms/script/avrexport/avrmail.php

if (!$mail_subject) $mail_subject = "BIG-IP Analytics Report";
if (!$mail_body) $mail_body = "Attached to this e-mail is a BIG-IP Analytics Report issued at $mail_time\n\n";
if (!$mail_from) $mail_from = 'BIG-IP Reporter';
if (!$mail_content_type) $mail_content_type = 'text/html'; <<<< Add this line for add text/html into content type.

[admin@bigip:Active:Standalone] ~ # chmod 444 /var/ts/dms/script/avrexport/avrmail.php

5. Click Send Now again and it works.


Note: To use AWS SES, you must verify your email address first (as a Sender). You can search SES in AWS and verify your email in Email Addresses. AWS sends an email. Click the embedded link after receipt, and then you can use it as the Sender address on the BIG-IP system.

Impact:
Cannot receive ASM reports.


908829-2 : The iqsyncer utility may not write the core file for system signals

Links to More Info: BT908829

Component: Global Traffic Manager (DNS)

Symptoms:
In certain instances, the iqsyncer utility may not write the core file for system signals.

Conditions:
-- SELinux policies enabled.
-- Run the iqsyncer utilities to initiate a core dump with system signals SIGABRT, SIGQUIT, and SIGSEGV.

Impact:
The iqsyncer utility does not write core file.

Workaround:
Disable SELinux with 'setenforce 0'.

You can now generate a core with a SIGQUIT (-3), but not with SIGABRT or SIGSEGV.


908801-2 : SELinux policies may prevent from iqsh/iqsyncer dumping core

Links to More Info: BT908801

Component: Global Traffic Manager (DNS)

Symptoms:
SELinux policies may prevent the iqsh/iqsyncer utilities from dumping core information.

Conditions:
-- SELinux policies enabled.
-- Run the iqsh/iqsyncer utilities to initiate a core dump.

Impact:
The operation does not result in dumping the core information.

Workaround:
Disable SELinux with 'setenforce 0'.


908753-5 : Password memory not effective even when password policy is configured

Links to More Info: BT908753

Component: TMOS

Symptoms:
The BIG-IP system does not prevent you from specifying previously used passwords, even if Secure Password Enforcement is enabled with password memory set to a non-zero value.

Conditions:
-- Password memory in auth settings is not 0 (zero).
-- Attempt to specify a previously specified password

Impact:
Password history to prevent user from using same password is not enforced.

Workaround:
None.


908453-5 : Trunks with names longer than 32 characters update working-mbr-count in vCMP guests incorrectly

Links to More Info: BT908453

Component: TMOS

Symptoms:
When a trunk is configured with a name longer than 32 characters on a vCMP host, guests update the working-mbr-count for the trunk incorrectly when another trunk on the host changes. This might result in vCMP guests failing over unexpectedly.

Conditions:
-- Trunk configured with a name longer than 32 characters on vCMP host.
-- Trunk made available to guests for high availability (HA) Group scoring.
-- At least one other trunk configured on vCMP host.
-- Interface state changes in any other trunk.

Impact:
The vCMP guests may fail over unexpectedly.

Workaround:
Do not use trunk names longer than 32 characters.


908001-2 : vCMP guest CPU usage may increase 4-5% after upgrade of vCMP host to v16.1.x

Links to More Info: BT908001

Component: Performance

Symptoms:
All vCMP guest configurations might see a 4-5% increase in CPU usage while running on VIPRION and iSeries platforms with the vCMP host upgraded to v16.1.x

Conditions:
-- All configurations (guest software version is not relevant)
-- Running vCMP on VIPRION and iSeries platforms
-- 'Host' upgraded to v16.1.x

Impact:
Increase of CPU usage of about 4-5% on the vCMP guest. This is not expected to cause noticeable performance impacts unless the vCMP guest CPU is already close to 100% use, when it is possible there may be up to a 15% TPS decrease.
 
If you are running vCMP on VIPRION and iSeries platforms, first evaluate your scenarios and capacity plan if you plan to upgrade the 'host' to 16.1.x.

Note: There is no CPU usage increase when v16.1.x 'guest' instances are run on an earlier 'host' version.

Guidance: In determining whether to upgrade the vCMP host to v16.1.x, carefully evaluate the performance and sizing requirements of your specific configuration.

Workaround:
None


907177-5 : Priority of embedded APM iRules is ignored

Links to More Info: BT907177

Component: Local Traffic Manager

Symptoms:
Custom iRule events are executed before the embedded APM iRule events, despite the custom iRule's priority value being larger than the APM iRule's priority value.

Conditions:
-- APM is provisioned.
-- Custom iRule with a priority value larger the APM iRule's priority value.

Impact:
Custom iRule event is executed before APM iRule event.

Workaround:
None.


906653-1 : Server side UDP immediate idle-timeout drops datagrams

Links to More Info: BT906653

Component: Local Traffic Manager

Symptoms:
With immediate idle-timeout, flows may be closed before a datagram is forwarded.

Conditions:
-- Immediate idle-timeout is set on the server context of a UDP virtual server.

Impact:
Datagrams are dropped periodically depending on traffic load.

Workaround:
None.


905477-6 : The sdmd daemon cores during config sync when multiple devices configured for iRules LX

Links to More Info: BT905477

Component: Local Traffic Manager

Symptoms:
The iRules LX workspaces belong on only one device in a Device Service Cluster (DSC). If you have the same iRules LX workspace configured on multiple devices and then perform a config sync operation, the sdmd daemon cores.

Conditions:
-- Multiple devices configured with the same iRules LX workspace in a DSC.
-- Change one of the devices such that the configuration requires a config sync.
-- Perform the config sync.

Impact:
The sdmd daemon cores. Although having multiple devices configured with the same iRules LX workspace is an incorrect configuration, sdmd should not core.

Workaround:
When the iRules LX workspace is correctly configured, i.e., on only one device in a DSC, there is no need to config sync, so this issues does not occur.


904713-2 : FailoverState device status and CM device status do not match shortly after triggering failover

Links to More Info: BT904713

Component: TMOS

Symptoms:
After triggering failover, the result returned by the API endpoint /mgmt/tm/shared/bigip-failover-state (the BIG-IP failover state worker) may not match the actual device failover state.

Conditions:
This may happen on an high availability (HA) setup with a sync-failover device group.

Impact:
Actions that require the correct output of the BIG-IP failover state worker may fail. For instance, deleting an SSL Orchestrator topology followed by immediately triggering failover may encounter this issue, causing the deletion to fail.

Workaround:
After waiting for a short amount of time, the BIG-IP failover state worker gets in sync with the device failover state. So in the example of deleting an SSL Orchestrator topology, the deletion should be successful if you try again after a short wait.


904661-4 : Mellanox NIC speeds may be reported incorrectly on Virtual Edition

Links to More Info: BT904661

Component: TMOS

Symptoms:
Speeds for Mellanox NICs on BIG-IP Virtual Edition may be reported incorrectly. The behavior varies depending on what driver is in use:
- Speeds are always reported as 10G when the mlxvf5 driver is used, regardless of the actual speed of the interface.
- Speeds are reported as either 10G or 40G when the xnet driver is used. This is accurate unless the actual NIC speed is greater than 40G, in which is it will still be reported as 40G.

Conditions:
-- BIG-IP Virtual Edition
-- Using a Mellanox NIC with the mlxvf5 or xnet driver

Impact:
Possibly incorrect media speed reported. (Actual speed is correct, regardless of what is displayed.)


904537-1 : The csyncd process may keep trying to sync the GeoIP database to a secondary blade

Links to More Info: BT904537

Component: Local Traffic Manager

Symptoms:
The most common symptom is when csyncd repeatedly syncs the GeoIP files and loads the GeoIP database, causing a large number of Clock advanced messages on all tmms.

Repeated log messages similar to the following are reported when a secondary slot logs into the primary slot to load the sys geoip database:

-- info sshd(pam_audit)[17373]: 01070417:6: AUDIT - user root - RAW: sshd(pam_audit): user=root(root) partition=[All] level=Administrator tty=ssh host=x.x.x.x attempts=1 start="Wed Apr 29 13:50:49 2020".
-- notice tmsh[17401]: 01420002:5: AUDIT - pid=17401 user=root folder=/Common module=(tmos)# status=[Command OK] cmd_data=load sys geoip.

Conditions:
-- VIPRION or vCMP guests.
-- Either of the following:
   - First installing the GeoIP database if the /shared/GeoIP/v2 directory does not exist.
   - When a new blade is installed into a chassis.

Impact:
Repeated logs of Clock advanced messages.

Workaround:
Run the command:
 clsh bigstart restart csyncd


904401-5 : Guestagentd core

Links to More Info: BT904401

Component: TMOS

Symptoms:
Guestagentd crashes on a vCMP guest.

Conditions:
This can occur during normal operation in a vCMP environment.

Impact:
Guestagentd crashes on the vCMP guest, and the vCMP host does not have accurate guest information, such as version, provisioning, high availability (HA) status, and tmm status.

Workaround:
None.


903573-3 : AD group cache query performance

Links to More Info: BT903573

Component: Access Policy Manager

Symptoms:
Active Directory queries are slow.

Conditions:
-- Active Directory (AD) authentication used
-- There are lots of AD caches in the environment, and users are in deeply nested groups.

Impact:
Active Directory query time can be excessive.


903521-1 : TMM fails to sign responses from BIND when BIND has 'dnssec-enable no'

Links to More Info: BT903521

Component: Global Traffic Manager (DNS)

Symptoms:
TMM fails to sign responses from BIND.

Conditions:
BIND has 'dnssec-enable no' in named.conf.

Impact:
TMM fails to sign responses from BIND.

Workaround:
Remove 'dnssec-enable no' from named.conf in options section.


903501-3 : VPN Tunnel establishment fails with some ipv6 address

Links to More Info: BT903501

Component: Access Policy Manager

Symptoms:
VPN Tunnel establishment fails with some ipv6 address

Conditions:
- APM is provisioned.
- Network Access with IPv6 virtual server is configured.

Impact:
VPN Tunnel cannot be established.

Workaround:
1. Disable the DB variable isession.ctrl.apm:
tmsh modify sys db isession.ctrl.apm value disable

2. Perform 'Apply Access Policy' for the access policy attached to the virtual server.

Important: The iSession control channel is needed if optimized apps are configured, so use this workaround only when 'No optimized apps are configured' is set (available in the GUI by navigating to Access :: Connectivity / VPN : Network Access (VPN) : Network Access Lists :: {NA resources} :: 'Optimization' tab).


903313-4 : OWASP page: File Types score in Broken Access Control category is always 0.

Links to More Info: BT903313

Component: Application Security Manager

Symptoms:
Under Broken Access Control category, the contribution of Disallowed File Types seems to be 0 no matter what is the number of Disallowed File Types in policy. As a result, it is not possible to reach full compliance.

Conditions:
Security Policy is configured. Not Applicable for parent or child policy.

Impact:
For any OWASP configurable policy (i.e. not parent or child policy), the policy cannot reach the maximum score for Broken Access Control category


901569-4 : Loopback traffic might get dropped when VLAN filter is enabled for a virtual server.

Links to More Info: BT901569

Component: Local Traffic Manager

Symptoms:
Loopback traffic (local traffic) destined to a virtual server might get dropped when the incoming packet matches a terminating connection flow.

Conditions:
-- VLAN filter is enabled on the virtual server created for loopback traffic processing.
-- An incoming packet matches a terminating connection flow (i.e., the connection flow terminates because of timeout, being dropped by iRule, etc.).

Impact:
Traffic that is matched against a terminating connection flow of a virtual is not processed by the virtual server.

Workaround:
Because this filter is ignored for loopback traffic, removing the 'Enabled On VLAN' filter at the virtual server mitigates the issue.


899253-1 : [GUI] GTM wideip-pool-manage in GUI fails when tens of thousands of pools exist

Links to More Info: BT899253

Component: Global Traffic Manager (DNS)

Symptoms:
Making changes to wide IP pools through GUI management do not take effect.

Conditions:
-- GTM configuration contains a sufficiently high number of pools (~ 15,000).
-- Using the GUI to assign a pool to a wide IP.

Impact:
Changes do not take effect. Unable to use the GUI to manage which pools are associated with a wide IP.

Workaround:
Use TMSH.


898381-3 : Changing the setting of apm-forwarding-fastl4 profile does not take effect

Links to More Info: BT898381

Component: Access Policy Manager

Symptoms:
Changing the setting of apm-forwarding-fastl4 profile does not take effect and is not getting applied to the last leg of client-initiated VPN traffic.

Conditions:
- APM is configured on the BIG-IP system.
- BIG-IP Administrator (Admin) has configured a VPN tunnel.
- Admin is trying to change the TCP characteristic of the last leg of VPN tunnel traffic by tuning the parameters of FastL4 profile apm-forwarding-fastl4.

Impact:
Admin cannot enforce the updated values of apm-forwarding-fastl4 profile on the last leg of client-imitated VPN tunnel traffic.

Workaround:
None.


897437-7 : First retransmission might happen after syn-rto-base instead of minimum-rto.

Links to More Info: BT897437

Component: Local Traffic Manager

Symptoms:
If a TCP profile is configured with a syn-rto-base value that is lower than minimum-rto, the first retransmission might happen after syn-rto-base.

This behavior is encountered only if the BIG-IP system is unable to compute the new RTO value before the retransmission timer expires, meaning:

-- The BIG-IP system has not received a packet with a TCP timestamp reply.
-- The BIG-IP system has not received an ACK for a timed sequence number.

Conditions:
Configured value of syn-rto-base is lower than minimum-rto.

Impact:
Retransmission might happen sooner than expected.

Workaround:
There are two possible workarounds:

-- Avoid using a syn-rto-base value that is lower than the minimum-rto value (the default values are 3 seconds for syn-rto-base and 1 second for minimum-rto).

-- Consider enabling timestamps to allow faster RTT measurement.


894593-2 : High CPU usage caused by the restjavad daemon continually crashing and restarting

Links to More Info: BT894593

Component: TMOS

Symptoms:
Restjavad may become unstable if the amount of memory required by the daemon exceeds the value allocated for its use.

Conditions:
The memory required by the restjavad daemon may grow significantly in system configurations with either a high volume of device statistics collection (AVR provisioning), or a with relatively large number of LTM objects managed by the REST framework (SSL Orchestrator provisioning).

Impact:
The overall system performance is degraded during the continuous restart of the restjavad daemon due to a relatively high CPU usage.

Workaround:
Please don't apply the workarounds below if encountering issues after upgrade to 14.1.5.1-, 15.1.7-, 16.1.3.1- and 17.0.0.1 and you already have restjavad.useextramb set to true. If you have low restjavad memory under these conditions it is likely you are encountering a problem caused by the behaviour change introduced in ID 1025261 ( https://cdn.f5.com/product/bugtracker/ID1025261.html ). The linked article has suggestions on how to mitigate the issue.

If you have restjavad.usextramb set to false and need more memory after upgrade to a version above you will also need to set provision.restjavad.extramb to a sensible value as well as the commands below - typically something like 384 + 80% of MIN (provision.extramb | 2500), so 1984 MB for example below.
That's a high value and it may be possible to set it lower eg it may be worth trying 384 + 20% of MIN(provision.extramb|2500) which is 784 MB for example beneath. You can try different values quite quickly by changing provision.restjavad.extramb and restarting restjavad which should only effect availability of REST API for a few seconds. Generally 384 MB should be seen as the minimum.

Increase the memory allocated for the restjavad daemon (e.g., 2 GB), by running the following commands in a BIG-IP terminal.
 
tmsh modify sys db restjavad.useextramb value true
tmsh modify sys db provision.extramb value 2000
bigstart restart restjavad
Note changing provision.extramb is service effecting and systems may take several minutes to return to a state they could handle traffic. It also needs to be set on each peer of a service cluster.

Note this may lead to impact on multi-module systems with ASM as approximately only 50-60% of provision.extramb value would be allocated as extra host memory and restjavad may take up to 80% of provision.extramb. It also lowers the ASM specific host allocation resulting in some tighter memory constraints on ASM daemons. Try to use the smallest value that works.


891333-2 : Very rarely the HSB can get into a corrupted state resulting in ARP entry in BIG-IP stuck incomplete.

Links to More Info: K32545132, BT891333

Component: TMOS

Symptoms:
Comparing the ARP response captured on the originator with the BIG-IP shows a single bit is flipped in the MAC address.
The incomplete ARP entry can produce secondary symptoms with network connectivity problems reflected in the status. For example: Config Sync, health monitor(s), etc.

Wireshark and tshark can interpret this issue as "unknown ARP opcode" as the ARP response is not 2 and "duplicate use of <IP> detected" as one IP shares two different MAC addresses, the correct one and the one with the flipped bit.

Conditions:
This can occur on BIG-IP hardware platforms containing a high-speed bridge (HSB).

Impact:
Network connectivity problems on some traffic passing through the affected HSB. Could be reflected in the status of Config Sync or more health monitors down on one member of high availability (HA) pair.

Workaround:
Reboot the affected device.


891145-7 : TCP PAWS: send an ACK for half-open connections that receive a SYN with an older TSVal

Links to More Info: BT891145

Component: Local Traffic Manager

Symptoms:
SYNs received with TSVal <= TS.Recent are dropped without sending an ACK in FIN-WAIT-2 state.

Conditions:
-- Timestamps are enabled in TCP profile.
-- Local TCP connection is in FIN-WAIT-2 state.
-- Remote TCP connection abandoned the flow.
-- A new TCP connection sends a SYN with TSVal <= TS.Recent to the local connection.

Impact:
The new TCP connection cannot infer the half-open state of Local TCP connections, which prevents faster recovery of half-open connections. The local TCP connection stays around for a longer time.

Workaround:
There are two workarounds:

-- Reduce the Fin Wait 2 timeout (the default: 300 sec) so that TCP connection is terminated sooner.

-- Disable TCP Timestamps.


890169-4 : URLs starting with double slashes might not be loaded when using a Bot Defense Profile.

Links to More Info: BT890169

Component: Application Security Manager

Symptoms:
When a URL starts with double slashes (i.e. "http://HOST//path"), and Bot Defense Profile decides to perform simple redirect, the request results with loading failure.

Conditions:
-- Bot Defense profile on blocking mode (or "Verification and Device-ID Challenges in Transparent Mode" is enabled) is attached to a virtual server.
-- A request is sent to a URL starting with double slash, to a non-qualified URL, during the profile's grace period.

Impact:
Request is not loaded (failure message is seen on browser), and the browser may be identified as a suspicious browser by Bot Defense.

Workaround:
None.


889813-3 : Show net bwc policy prints bytes-per-second instead of bits-per-second

Links to More Info: BT889813

Component: TMOS

Symptoms:
The 'tmsh show net bwc policy' is printing out bits-per-second in the value field, but the name field says 'bytesPerSec'.

Conditions:
Running the tmsh command:
tmsh show net bwc policy

Impact:
The stats are in bits-per-second, but the label says bytesPerSec. Although there is no functional impact, the incorrect label could cause confusion.

Workaround:
None.


889605-2 : iApp with Bot profile is unavailable if application folder includes a subpath

Links to More Info: BT889605

Component: iApp Technology

Symptoms:
iApp with Bot profile is unavailable if the application folder includes a subpath. If the subpath is not present then iApp with bot profile is available.

Conditions:
1) Create default "Bot Protection" or "Web Application Comprehensive Protection" with an enabled "Bot Defense" use case in WGC without a virtual server.
2) Go to "iApps >> Application Services: Applications" and refer to the created iApp.

Impact:
iApp cannot be loaded when tried to open through iApps >> Applications view in TMUI.

Workaround:
View the configuration created from Guided configuration as mentioned: iApps >> Application Services >> Applications LX menu


888885-3 : BIG-IP Virtual Edition TMM restarts frequently without core

Links to More Info: BT888885

Component: Local Traffic Manager

Symptoms:
The following messages are found in the QKViews:
"bigipA notice MCP bulk connection aborted, retrying"
"bigipA notice Initiating TMM shutdown"

Prior to this, the TMM process logs that it is waiting for its instances to reach different states. For example,
"localhost notice ixlv(1.3)[0:7.0]: Waiting for tmm1 to reach state 1..."

In the /var/log/ltm file, the following message are found sometimes.
"bigip1 crit tmm9[19358]: 01230017:2: Unable to attach to PCI device 00:09.00 for Interface 1.5"

Conditions:
BIG-IP VE with SR-IOV enabled on a Red Hat Enterprise Linux 7.7 which is a part of Red Hat OpenStack Platform 13

Impact:
The TMM process restarts without a core file repeatedly.
Traffic disrupted while tmm restarts.


888765-2 : After upgrading from 13.1.0 to 15.1.0.1 CGNAT is deprovisioned and tmm is restarted by reloaded config from text files

Links to More Info: BT888765

Component: TMOS

Symptoms:
After upgrading, CGNAT is de-provisioned and tmm is restarted after config load.

Conditions:
- CGNAT provisioned prior to upgrade
- Upgrade from 13.1.0 to 15.1.0.1 and reboot

Impact:
-- CGNAT is de-provisioned
-- Tmm restarts

Workaround:
After upgrading, re-provision CGNAT:

tmsh modify sys provision cgnat level <level>
tmsh save sys config


888081-6 : BIG-IP VE Migration feature fails for 1NIC

Links to More Info: BT888081

Component: TMOS

Symptoms:
When a saved UCS is attempted to be restored in a new BIG-IP Virtual Edition (VE) in order to migrate the configuration, it fails.

load_config_files[28221]: "/usr/bin/tmsh -n -g -a load sys config partitions all " - failed. -- 01071412:3: Cannot delete IP (x.x.x.x) because it is used by the system config-sync setting.

Conditions:
The UCS load step might fail if the DB variable Provision.1NicAutoconfig is set to disable.

Impact:
The UCS restore fails.

Workaround:
The DB variable can be set to enable before loading the UCS.

# tmsh modify sys db provision.1nicautoconfig value enable


887921-2 : iRule command “RESOLVER::name_lookup” returns null for responses more than 512 bytes

Links to More Info: BT887921

Component: Global Traffic Manager (DNS)

Symptoms:
“RESOLVER::name_lookup” returns null.

Conditions:
Response is larger than 512 bytes.

Impact:
“RESOLVER::name_lookup” returns empty answer.


887681-4 : Tmm SIGSEGV in rrset_array_lock,services/cache/rrset.c

Links to More Info: BT887681

Component: Global Traffic Manager (DNS)

Symptoms:
TMM Cored with SIGSEGV.

Conditions:
N/A.

Impact:
Traffic disrupted while tmm restarts.


887621-4 : ASM virtual server names configuration CRC collision is possible

Links to More Info: BT887621

Component: Application Security Manager

Symptoms:
A policy add/modify/delete fails with the following error:

-- crit g_server_rpc_handler_async.pl[19406]: 01310027:2: ASM subsystem error (asm_config_server.pl ,F5::ASMConfig::Handler::log_error_and_rollback): Failed on insert to DCC.VS_RAMCACHE (DBD::mysql::db do failed: Duplicate entry '375946375' for key 'PRIMARY').

Conditions:
This can occur when adding a policy. The chance of it occurring increases when there are many virtual servers.

Impact:
Every config update fails.

Workaround:
Figure out which virtual servers have the CRC collision (by looking into DCC.RAMCACHE_VS). Change the name of one of these virtual servers.

You can get the name of the affected virtual server by using the entry reported in the 'Duplicate entry' log, and running this command.

mysql -u root -p$(perl -MPassCrypt -nle 'print PassCrypt::decrypt_password($_)' /var/db/mysqlpw) -e 'SELECT * FROM DCC.VS_RAMCACHE WHERE vs_name_crc = 375946375'


887265-4 : BIG-IP systems may fail to come online after upgrade with ASM and VLAN-failsafe configuration

Links to More Info: BT887265

Component: Local Traffic Manager

Symptoms:
When booting to a boot location for the first time, the system does not come on-line.

Conditions:
-- There is a large configuration.
-- VLAN failsafe is configured, and the failsafe-action is something other than failover.
-- The BIG-IP system is an appliance.

Impact:
BIG-IP processes continually restart (VLAN failsafe-action failover-restart-tm), or the BIG-IP system continually reboots (VLAN failsafe-action reboot)

Workaround:
Either disable VLAN failsafe or set the failsafe-action to failover during an upgrade.


887045-7 : The session key does not get mirrored to standby.

Links to More Info: BT887045

Component: Local Traffic Manager

Symptoms:
When a session variable key length is 65 KB, session mirroring fails for that specific key.

Conditions:
-- APM high availability (HA) setup.
-- Access Policy is configured and synced across both devices.
-- A session variable key of ~65 KB arrives

Impact:
The session key does not get mirrored to standby.

Workaround:
None


886145-1 : The 'Reconnect' and 'Reconnect All' buttons do not work if reached via a particular section of the DNS GUI.

Links to More Info: BT886145

Component: Global Traffic Manager (DNS)

Symptoms:
The 'Reconnect' and 'Reconnect All' buttons (introduced in BIG-IP version 14.1.0 to restart some or all iQuery connections) do not work when clicked.

The 'Reconnect' button does not become enabled when a server is selected from the list, and an error is logged in the browser console.

The 'Reconnect All' button is clickable but returns the error when clicked:
No response action specified by the request.

Conditions:
You have accessed the buttons via the following GUI path:

DNS :: GSLB :: Data Centers :: [dc name] > Servers

Impact:
The buttons do not work, making the corresponding feature unavailable from the GUI.

Workaround:
Access the buttons using the following alternative GUI path:

DNS :: GSLB :: Servers


884945-1 : Latency reduce in case of empty parameters.

Links to More Info: BT884945

Component: Application Security Manager

Symptoms:
Traffic load with many empty parameters may lead to increased latency.

Conditions:
Sending requests with many empty parameters

Impact:
Traffic load with many empty parameters may cause increased latency through the BIG-IP system.

Workaround:
None


884729-1 : The vCMP CPU usage stats are incorrect

Links to More Info: BT884729

Component: TMOS

Symptoms:
The vCMP CPU usage stats are incorrect when process on a secondary blade has the same PID as that of primary blade's qemu process.

Conditions:
A process on a secondary blade has the same PID as that of primary blade's qemu process.

Impact:
The vCMP CPU usage stats are intermittently incorrect.

Workaround:
None.


882933-1 : Nslookup might generate a core during system restart

Links to More Info: BT882933

Component: Global Traffic Manager (DNS)

Symptoms:
Nslookup generates a core file. The core file name might start with "nslookup", "isc-worker", "isc-timer" or "isc-socket".

Conditions:
Multiple instances of nslookup are running when the system shuts down.

Impact:
A core file is generated. However, since this is during system shutdown, the impact should be minimal.


882729-5 : Applied Blocking Masks discrepancy between local/remote event log

Links to More Info: BT882729

Component: Application Security Manager

Symptoms:
Applied Blocking Masks discrepancy between local/remote event log, ASM logging event logs both locally and remotely to BIG-IQ has discrepancy.

Conditions:
This occurs when "Applied Blocking Masks" logs are emitted on a device where local and remove event logging is configured.

Impact:
This is cosmetic but can lead to confusion.


882609-7 : ConfigSync status remains 'Disconnected' after setting ConfigSync IP to 'none' and back

Links to More Info: BT882609

Component: TMOS

Symptoms:
After setting a device's ConfigSync IP to 'none' and then back to an actual IP address, the device remains in a disconnected state, and cannot establish ConfigSync connections to other BIG-IP systems in its trust domain.

MCPD periodically logs messages in /var/log/ltm:
err mcpd[27610]: 0107142f:3: Can't connect to CMI peer a.b.c.d, TMM outbound listener not yet created.

Conditions:
--- BIG-IP system is in a trust domain with other BIG-IP systems.
--- Local device's ConfigSync IP is set to 'none', and then back to an actual IP address.

Impact:
Devices unable to ConfigSync.

Workaround:
This workaround will disrupt traffic while TMM restarts:

1. Ensure the local ConfigSync IP is set to an IP address.
2. Restart TMM:
bigstart restart tmm


This workaround should not disrupt traffic:

Copy and paste the following command into the Advanced Shell (bash) on a BIG-IP system, and then run it. This sets the ConfigSync IP for all device objects to 'none', and then back to their correct values.

TMPFILE=$(mktemp -p /var/tmp/ ID882609.XXXXXXX); tmsh -q list cm device configsync-ip > "$TMPFILE"; sed 's/configsync-ip .*$/configsync-ip none/g' "$TMPFILE" > "$TMPFILE.none"; tmsh load sys config merge file "$TMPFILE.none"; echo "reverting back to current"; tmsh load sys config merge file "$TMPFILE"


881937-2 : TMM and the kernel choose different VLANs as source IPs when using IPv6.

Links to More Info: BT881937

Component: Local Traffic Manager

Symptoms:
IPv6 traffic generated from the host, either from a host daemon, monitors, or from the command line, can use a MAC and IPv6 source address from different VLANs.

Conditions:
-- Multiple VLANs configured with IPv6 addresses.
-- Multiple routes to the same destination, either the same or more specific, default routes, etc., that cover the traffic destination.
-- Changes are made to routes that cause the traffic to the destination to shift from one VLAN and gateway to another. This can be typically observed with dynamic routing updates.
- The db key snat.hosttraffic is set to disable.

Impact:
Traffic to the destination may fail because the incorrect source IPv6/MAC address is used, which might cause monitor traffic to fail.

Workaround:
tmsh list sys db snat.hosttraffic
tmsh modify sys db snat.hosttraffic value enable
tmsh save sys config


881065-5 : Adding port-list to Virtual Server changes the route domain to 0

Links to More Info: BT881065

Component: Local Traffic Manager

Symptoms:
When attaching the port-list to virtual server dest:port-list, the route domain of the virtual server is changed to the default value of 0, and the port-list is not correctly applied. This is encountered in the GUI but not in the CLI.

Conditions:
Using port-list along with virtual server in non default route domain using the GUI.

Impact:
You are unable to use the GUI to attach a port-list that uses a non-default route domain to a virtual server.

Workaround:
Use tmsh to attach a port-list to a virtual server if the port-list uses a non-default route domain.


880689-1 : Update oprofile tools for compatibility with current architecture

Component: TMOS

Symptoms:
Current operf as shipped with BIG-IP is out of date and will not work.

Per the oprofile page (https://oprofile.sourceforge.io/news/) the version included in our systems (0.9.9) was released in 2013.

Conditions:
Opcontrol still works but operf will not load.
# operf --version
use the opcontrol command instead of operf.

Impact:
Outdated operf means that it cannot be used for troubleshooting purposes.


880565-5 : Audit Log: "cmd_data=list cm device recursive" is been generated continuously

Links to More Info: BT880565

Component: Device Management

Symptoms:
The system generates and logs the following message continuously, at the rate of 3 times a minute, in /var/log/audit:

-- bigip1 notice tmsh[47755]: 01420002:5: AUDIT - pid=47755 user=root folder=/ module=(tmos)# status=[Command OK] cmd_data=cd / ;
-- bigip1 notice tmsh[47755]: 01420002:5: AUDIT - pid=47755 user=root folder=/ module=(tmos)# status=[Command OK] cmd_data=list cm

Conditions:
This occurs during normal operation.

Impact:
Audit log file contains numerous 'cmd_data=list cm device recursive' messages.

Workaround:
-- To suppress all messages, do the following:

1. Edit the 'include' section of syslog configuration to suppress audit logs of 'cmd_data=cd /' and 'cmd_data=list cm device recursive':

# tmsh edit /sys syslog all-properties

2. Replace 'include none' with following syntax:
===
sys syslog {
- snip -
    include "
filter f_audit {
       facility(local0) and match(AUDIT) and not match(\"cmd_data=list cm device recursive|cmd_data=cd /\");
};"
- snip -
}


-- To filter the messages sent to existing remote syslog servers, do the following:

1. Set sys syslog remote-servers none:
# tmsh modify sys syslog remote-servers none

2. Define the remote syslog server in the 'sys syslog include' statement.

3. Add the following filter:

   filter f_remote_server {
   not (facility(local0) and message(\"AUDIT\") and match(\"cmd_data=list cm device recursive|cmd_data=cd /\"));
    };

Result: The system sends all messages to the remote syslog server, excluding the messages that match the filter.


Here is a sample filter, with sample data:

sys syslog {
    include "
    filter f_remote_server {
    not (facility(local0) and message(\"AUDIT\") anD match(\"cmd_data=list cm device recursive|cmd_data=cd /\"));
    };
    destination d_remote_loghost {
        udp(\"10.0.0.1\" port(514));
    };
    log {
        source(s_syslog_pipe);
        filter(f_remote_server);
        destination(d_remote_loghost);
    };
    "
}


879969-8 : FQDN node resolution fails if DNS response latency >5 seconds

Links to More Info: BT879969

Component: TMOS

Symptoms:
When resolving FQDN names for FQDN nodes/pool members, pending DNS requests are timed out after 5 seconds with no response from the DNS server.
If there is a persistent latency of 5 seconds or greater in the DNS server responses, FQDN name resolution will fail and ephemeral nodes/pool members will not be created.

Conditions:
- BIG-IP using FQDN nodes/pool members
- Persistent latency of 5 seconds or greater in the DNS server responses

Impact:
Ephemeral pool members may not be created, thus no traffic will be sent to the intended pool members.

Workaround:
Resolve any persistent latency issues that might cause delays of 5 seconds or more in DNS server responses.


878641-3 : TLS1.3 certificate request message does not contain CAs

Links to More Info: BT878641

Component: Local Traffic Manager

Symptoms:
TLS1.3 certificate request message does not include CAs
https://datatracker.ietf.org/doc/html/rfc8446#section-4.2.4

Conditions:
TLS1.3 and client authentication

Impact:
The Advertised Certificate Authorities option on Client SSL profiles does not function when TLS 1.3 is selected


878253-5 : LB::down no longer sends an immediate monitor probe

Links to More Info: BT878253

Component: Local Traffic Manager

Symptoms:
The iRule command LB::down is supposed to send an immediate monitor probe, but it does not.

Conditions:
-- Executing LB::down in an iRule.

Impact:
A monitor probe is not immediately sent, which may cause a pool member to be marked down longer than it should be.


876569-2 : QAT compression codec produces gzip stream with CRC error

Links to More Info: BT876569

Component: Local Traffic Manager

Symptoms:
When an HTTP compression profile is enabled on BIG-IP platforms with Intel QuickAssist Technology (Intel QAT) compression accelerators, gzip errors are produced.

Conditions:
This occurs when the following conditions are met:

-- The following platforms with Intel QAT are affected:
   + 4450 blades
   + i4600/i4800
   + i10600/i10800
   + i7600/i7800
   + i5600/i5800
   + i11600/i11800
   + i11400/i11600/i11800
   + i15600/i15800

-- The compression.qat.dispatchsize variable is set to any of the following values:
   + 65535
   + 32768
   + 16384
   + 8192

-- The size of the file being compressed is a multiple of the compression.qat.dispatchsize value, for exampld:

   + 65355*32768
   + 8192*32768

Impact:
Clients cannot decompress the compressed file because there is an invalid gzip footer.

Workaround:
Disable hardware compression and use software compression.


874877-4 : The bigd monitor reports misleading error messages

Links to More Info: BT874877

Component: Local Traffic Manager

Symptoms:
When a recv string is used with an HTTP/HTTP2/HTTPS/TCP monitor, the HTTP status code is collected and in the event of failure, the most recent value (from before the failure) is retrieved and used as part of the log output. This can result in a message that is misleading.

Conditions:
- The BIG-IP system configured to monitor an HTTP/HTTP2 server.
- The BIG-IP system configured to monitor an HTTPS/TCP monitor.

Impact:
Generates a misleading log messages, difficulty in identifying the actual cause of the monitor failure.

This occurs because the system stores the 'last error' string for these monitors. This can be misleading, especially when a receive string is used. Following is an example:

-- A BIG-IP system is monitoring an HTTP server that is returning proper data (i.e., matching the receive string).
-- The HTTP server goes down. Now the BIG-IP system will have a last error string of 'No successful responses received before deadline' or 'Unable to connect'.
-- The HTTP server goes back up and works for a while.
-- For some reason, the HTTP server's responses no longer match the receive string.

In this case, a message is logged on the BIG-IP system:

      notice mcpd[6060]: 01070638:5: Pool /Common/http member /Common/n.n.n.n:n monitor status down. [ /Common/my_http_monitor: down; last error: /Common/my_http_monitor: Unable to connect @2020/01/09 04:18:20. ] [ was up for 4hr:18mins:46sec ]

The 'Unable to connect' last error reason is not correct: the BIG-IP system can connect to the HTTP server and gets responses back, but they do not match the received string.

Workaround:
None


872165-4 : LDAP remote authentication for REST API calls may fail during authorization

Links to More Info: BT872165

Component: TMOS

Symptoms:
LDAP (or Active Directory) remote authentication fails during authorization for REST API calls.

Clients receive 401 Unauthorized messages and /var/log/restjavad.x.log may report messages similar to the following:

-- [I][1978][26 Mar 2021 13:23:36 UTC][8100/shared/authn/login AuthnWorker] User remoteuser failed to login from 192.0.2.1 using the tmos authentication provider

-- [WARNING][807][26 Mar 2021 14:43:24 UTC][RestOperationIdentifier] Failed to validate Authentication failed.

Conditions:
LDAP (or Active Directory) remote authentication configured with a User Template instead of a Bind Account.

Impact:
Unable to authenticate as remote-user for access that uses authorization, like REST API calls.

Workaround:
You can use either of the following workarounds:

-- Configure LDAP/AD remote authentication to utilize a Bind account instead of the User Template.
-- Create a local user account for each remote user, allowing local authorization (authentication remains remote).


869049-7 : Charts discrepancy in AVR reports

Links to More Info: BT869049

Component: Application Visibility and Reporting

Symptoms:
Discrepancy in AVR reports. When filtering on the 'last month' interval, a specific number of total requests per virtual server is shown. Then when filtering to the present day from a date that encompasses that month, a lower number is reported.

Conditions:
-- Number of records in database exceeds the maximum mount of data that AVR can aggregate between different table-resolutions.
-- There are metrics on the report other than the default one (hits-count).

Impact:
Stats on DB get corrupted and incorrect.

Workaround:
None.


868557-1 : Unable to initiate SWG database download from Admin UI when management network has no direct internet connectivity.

Links to More Info: BT868557

Component: Access Policy Manager

Symptoms:
If the management network is not directly connected to the internet, 'Download Now' action on 'Access ›› Secure Web Gateway : Database Settings : Database Download' fails the connectivity check and refuses to start database download.

Conditions:
-- Configure proxy in the same subnet and block BIG-IP management traffic on the gateway
-- Remove default routes from linux routing table and add route to the proxy server if necessary.

Impact:
Database download fails and you see an error message:

"Database download server (download.websense.com) could not be reached. Please verify the correctness of the DNS lookup server configured on this BIG-IP system."

Workaround:
-- Run the following tmsh command:
tmsh modify sys url-db download-schedule urldb download-now true

-or-

-- Configure download settings and wait until the scheduled database download.


867985-6 : LTM policy with a 'shutdown' action incorrectly allows iRule execution

Links to More Info: BT867985

Component: Local Traffic Manager

Symptoms:
BIG-IP systems provide manipulation tools over a connection with an LTM policy and/or iRule. LTM policy takes precedence over iRules and has an option to shutdown a connection based on satisfied conditions. When a connection is closing, an iRule should not be executed under the same conditions.

Conditions:
-- The BIG-IP system has a virtual server with an LTM policy and an iRule.
-- The LTM policy has action 'shutdown connection' under certain conditions.
-- The iRule has an event which is triggered under the same conditions.

Impact:
The iRule is executed before the connection is being reset.

Workaround:
None.


867549-1 : LCD touch panel reports "Firmware update in progress" indefinitely

Links to More Info: BT867549

Component: TMOS

Symptoms:
After a software upgrade that includes an LCD firmware update, the LCD touch panel may remain stuck reporting an error indefinitely / for longer than 30 minutes:
Firmware update in Progress may take up to 30 minutes.

Conditions:
This issue occurs when all of the following conditions are met:

-- You have one of the following BIG-IP platforms:
 * i850
 * i2x00
 * i4x00
 * i5x00
 * i7x00
 * i10x00
 * i11x00
 * i15x00
 * HRC-i2x00
 * HRC-i5x00
 * HRC-i10x00

-- You perform a software upgrade that updates the firmware on the LCD touch panel, e.g. upgrading from BIG-IP v13.1.x to BIG-IP v14.1.x or newer.

Impact:
The system is functional, but the LCD displays the firmware update screen indefinitely. The LCD cannot be used while it is frozen on the firmware update warning screen.

Workaround:
Important: Before attempting this workaround, check that there are no indications the system is still performing a firmware update (such as a terminal prompt), and that the following messages can be found in /var/log/ltm after the most recent boot:

notice chmand[6302]: 012a0005:5: firmware update succeeded.
notice chmand[6302]: 012a0005:5: Firmware check finished.

These messages indicates that the firmware update has finished, and the LCD is displaying the warning screen in error, so it is safe to perform the workaround.

Reboot the BIG-IP system to return the LCD to normal operation.

After a reboot of the BIG-IP operating system, the LCD touch panel should be responsive.


867253-4 : Systemd not deleting user journals

Links to More Info: BT867253

Component: TMOS

Symptoms:
When setting 'SystemMaxUse' to any value, systemd does not honor this limit, and the specified size is exceeded.

Conditions:
Using a non-TMOS user account with external authentication permission.

Note: Systemd-journald is configured to create a user journal for every remote user that logs into the BIG-IP system.

Impact:
Journald filling up the file system. These journals are allocated with a minimum size of 4MiB and are not removed when the log entries age-out.

Workaround:
Option 1:
To immediately free up space, manually remove per-user journal logs from the following location:
  /var/log/journal/*/user-*

Option 2:
To prevent the system from creating these journal files going forward:

1. Edit /etc/systemd/journald.conf and add the following at the bottom of the file:
  SplitMode=none

2. Restart systemd-journal service
  # systemctl restart systemd-journald

3. Delete the existing user journal files from /var/log
  # rm /var/log/journal/*/user-*

Note:
-- You must apply this workaround separately to each blade of a VIPRION or vCMP guest running on a VIPRION.
-- You must reapply this workaround after performing software installations.


865653-1 : Wrong FDB table entries with same MAC and wrong VLAN combination

Links to More Info: BT865653

Component: TMOS

Symptoms:
Forwarding DataBase (FDB) table has duplicate MAC entries with the incorrect VLANs.

MAC entries are correct in the switch but not in the control plane.

Conditions:
Enable L2Wire.

Impact:
Duplicate MAC entries with incorrect VLANs in FDB table.

Workaround:
Restart bcm56xxd:
bigstart restart bcm56xxd

Note: You can use tmsh to see the table:
tmsh -m show net fdb


862001-6 : Improperly configured NTP server can result in an undisciplined clock stanza

Links to More Info: BT862001

Component: Local Traffic Manager

Symptoms:
There can be an undisciplined clock stanza in /etc/ntp.conf, resulting in an undisciplined clock.

NTP documentation:
http://support.ntp.org/bin/view/Support/UndisciplinedLocalClock

Conditions:
This might occur in at least the following ways:
-- No server is specified in 'sys ntp servers {}'.
-- A server does exist, but an improper method was used to configure the NTP server.

Impact:
When the LOCAL undisciplined clock is left as a valid time-source, it delays the system synchronizing time to a real NTP server. It can also result in time being adjusted incorrectly if the the remote time-source becomes unreachable.

Workaround:
Configure a dummy server via 'ntp servers {}' that does not respond.

While this removes the undisciplined local clock, it does result in ntpd having an unreachable time source, and could be flagged in diagnostics, misdirect other troubleshooting, generate unnecessary traffic, etc.
 
However, if the 'dummy' source starts responding, it could become a rogue time source.


860573-6 : LTM iRule validation performance improvement by tracking procedure/event that have been validated

Links to More Info: BT860573

Component: TMOS

Symptoms:
Loading (with merge) a configuration file that references some iRules results in validating every iRule and ends up validating the same procedures multiple times for every virtual server a single iRule is associated with.

Conditions:
Configuration which has 100's of virtual servers, some iRules that are assigned to all virtual servers and a few library iRules.

Impact:
Task fails (via REST) or ends up taking a really long time when run manually.

Workaround:
None.


860277-6 : Default value of TCP Profile Proxy Buffer High Low changed in 14.1

Links to More Info: BT860277

Component: Local Traffic Manager

Symptoms:
Version: 13.1.3.1

# tmsh list ltm profile tcp tcp proxy-buffer-high proxy-buffer-low
ltm profile tcp tcp {
    proxy-buffer-high 49152
    proxy-buffer-low 32768
}

       proxy-buffer-high
            Specifies the highest level at which the receive window is closed.
            The default value is 49152.

       proxy-buffer-low
            Specifies the lowest level at which the receive window is closed.
            The default value is 32768.

Version: 14.1.2.2

# list ltm profile tcp TCP proxy-buffer-high proxy-buffer-low
ltm profile tcp tcp {
    proxy-buffer-high 65535
    proxy-buffer-low 32768
}


proxy-buffer-high
            Specifies the highest level at which the receive window is closed.
            The default value is 131072.

proxy-buffer-low
            Specifies the lowest level at which the receive window is closed.
            The default value is 98304.

Conditions:
Looking at the help for proxy-buffer-high and proxy-buffer-low in tmsh

Impact:
The default value for proxy-buffer-high is 65535 and the default value for proxy-buffer-low is 32768, but the help text indicates that the defaults are 13072 and 98304 respectively.


858877-5 : SSL Orchestrator config sync issues between HA-pair devices

Links to More Info: BT858877

Component: TMOS

Symptoms:
SSL Orchestrator configuration deployment across BIG-IP devices in a high-availability (HA) group may result in inconsistent state, if during deployment the connectivity between the HA peers is lost.

Conditions:
Deploying SSL Orchestrator configuration across BIG-IP devices in an HA group.

Impact:
Inconsistent SSL Orchestrator configuration on BIG-IP devices in an HA group.

Workaround:
Run the /usr/bin/ha-sync script. See ha-sync -h for help.


857769-1 : FastL4+HTTP or FastL4+Hash-Persistence virtual servers do not work correctly in DSR mode.

Links to More Info: BT857769

Component: Local Traffic Manager

Symptoms:
Given a long-lived TCP connection that can carry multiple client requests (for example, but not limited to, HTTP requests), the BIG-IP system fails to forward requests after the forty-eighth one.

The client will try re-transmitting the answered request, but the BIG-IP system will persist in dropping it.

Conditions:
This issue occurs when all of the following conditions are met:

1) The virtual server uses the FastL4 profile.
2) The virtual server also uses the HTTP or Hash-Persistence profiles.
3) The virtual server operates in DSR (Direct Server Return) mode (also known as N-Path).

Impact:
The BIG-IP system fails to forward traffic.

Workaround:
Do not use the HTTP or Hash-Persistence profiles with a FastL4 virtual server operating in DSR mode.

Note: It is fine to use an iRule that calls hash persistence commands (for example, "persist carp [...]") as long as the Hash-Persistence profile is not associated to the virtual server. This technique will allow you to persist on a hash based on L4 information that you can extract at CLIENT_ACCEPTED time. For example, the following iRule correctly persists a specific client socket to a pool member in a FastL4 DSR configuration:

when CLIENT_ACCEPTED {
   persist carp [IP::client_addr]:[TCP::client_port]
}


851837-1 : Mcpd fails to start for single NIC VE devices configured in a trust domain

Links to More Info: BT851837

Component: TMOS

Symptoms:
Single NIC BIG-IP Virtual Edition (VE) devices configured in a trust domain (e.g., in high availability (HA)) cannot reload a running configuration when restarted and/or when mcpd fails to load the config, and reports a validation error:

err mcpd[25194]: 0107146f:3: Self-device config sync address cannot reference the non-existent Self IP ([IP ADDR]); Create it in the /Common folder first.

Conditions:
Single NIC VE devices configured in a trust domain (e.g., HA)

Impact:
The mcpd process fails to start, and the configuration does not load.

Workaround:
Manually copy and paste the self IP configuration snippet into the /config/bigip_base.conf file:

1. Connect to the CLI.

2. Edit bigip_base.conf, and add the following:

net self self_1nic {
    address 10.0.0.1/24
    allow-service {
       default
    }
    traffic-group traffic-group-local-only
    vlan internal
}

Note: replace 10.0.0.1 with the IP indicated in the error message

3. Save the changes and exit.

4. Load the configuration using the command:
tmsh load sys config

5. If APM or ASM is provisioned/configured, then also restart services with this command:
bigstart restart


851385-8 : Failover takes too long when traffic blade failure occurs

Links to More Info: BT851385

Component: Local Traffic Manager

Symptoms:
When blades 1 and 4 are disabled on the active chassis, the failover period is between 3.4 to 4.7 seconds before the next-active device starts processing messages.
  
If the blades are physically pulled from the chassis,
the failure occurs within 1 second.

Conditions:
-- Multi-blade VIPRION system
-- Blades 1 and 4 are connected to the network via trunks, blades 2 and 3 are CPU-only blades
-- Blades 1 and 4 are disabled via the GUI

Impact:
Significant delay before BIG-IP delivers a web page during between-cluster failover


851121-6 : Database monitor DBDaemon debug logging not enabled consistently

Links to More Info: BT851121

Component: Local Traffic Manager

Symptoms:
Debug logging in the database monitor daemon (DBDaemon) for database health monitors (mssql, mysql, postrgresql, oracle) is enabled on a per-monitor basis.
When a ping is initiated for a particular monitor with debug logging enabled in the monitor configuration, debug logging in DBDaemon is enabled.
When a ping is initiated for a particular monitor with debug logging disabled in the monitor configuration, debug logging in DBDaemon is disabled.
When monitoring database pool members with a mix of monitors with debug logging enabled vs. disabled, the result can be that debug logging in DBDaemon is enabled and disabled at times which do not correspond to all actions related to a specific database monitor, or pool members monitored by that monitor.
In addition, debug messages logging internal DBDaemon state related to the management of the full collection of monitored objects, active threads, etc. may not be logged consistently.

Conditions:
-- Using multiple database health monitors (mssql, mysql, postrgresql, oracle)
-- Enabling debug logging on one or more database health monitors, but not all

Debug logging for database health monitors is enabled by configuring the "debug" property of the monitor with a value of "yes".
Debug logging is disabled by configuring the "debug" property with a value of "no" (default).

# tmsh list ltm monitor mysql mysql_example debug
ltm monitor mysql mysql_example {
    debug yes
}

Impact:
Logging of database monitor activities by DBDaemon may be inconsistent and incomplete, impeding efforts to diagnose issues related to database health monitors.

Workaround:
When attempting to diagnose database health monitor issues with DBDaemon debug logging, enable debug logging for ALL database monitors currently in use.
Once diagnostic data collection is completed, disable debug logging for all database monitors currently configured/in use.


850141-2 : Possible tmm core when using Dosl7/Bot Defense profile

Links to More Info: BT850141

Component: Application Security Manager

Symptoms:
Tmm crashes.

Conditions:
-- Dosl7/Bot defense profile is attached to a virtual server
-- A request is sent with a trusted bot signature and requires a rDNS.
-- An asynchronous iRule is attached to the virtual server

OR:
-- Device ID feature is enabled, and the current request requires a complex Device ID generation.
-- The connection is closed before the response arrives.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


846977-7 : TCP:collect validation changed in 12.0.0: the first argument can no longer be zero

Links to More Info: BT846977

Component: Local Traffic Manager

Symptoms:
Validation for TCP::collect was changed in BIG-IP software v12.0.0 (with the introduction of JET specifications). Prior to 12.0.0, there were no restrictions on the values of the two arguments. As of 12.0.0, the first argument ('collect_bytes') must be a positive integer, and the second argument ('skip_bytes) must be a non-negative integer.

Occurrences of 'TCP::collect 0 0' in iRules experience issues when upgrading to a newer version, producing warnings in LTM log:

/Common/T_collect:9: warning: [The following errors were not caught before. Please correct the script in order to avoid future disruption. "invalid argument 0; expected syntax spec:"136 17][TCP::collect 0 0].

Conditions:
-- Using a version of BIG-IP software earlier than 12.0.0, configure an iRule with a 'TCP::collect 0 0' command.
-- Upgrade to 12.0.0 or later.

Impact:
Warning in the LTM log file. The iRules containing 0 values do not function as expected. There is no other impact.

Workaround:
Change 'TCP::collect 0 0' to a value other than 0 (zero) in any iRules before or after upgrade.


844925-5 : Command 'tmsh save /sys config' fails to save the configuration and hangs

Links to More Info: BT844925

Component: TMOS

Symptoms:
The 'tmsh save /sys config' command hangs and fails to save the configuration if there is a memory allocation failure when creating the reply.

Conditions:
-- A large number of iApps: in the thousands.
-- Each iApp has tens of variables.

Impact:
Because tmsh cannot save the configuration, if the BIG-IP system reboots, any changes made since the last successful save are lost.

Workaround:
Run the command:
tmsh save /sys config binary

This does not save the configuration to files in /config, but it does at least allow you to save the binary configuration.

That way, you can reboot the BIG-IP system and not lose the configuration.

Note: It is possible that a reboot will provide sufficient memory to save to configuration files. It depends on the configuration of virtual memory at the time of the save. It is possible that every time you want to save the config, you must use the binary option.


843293-1 : When L7 performance FPGA is loaded, "tmsh show sys fpga" shows standard-balanced-fpga.

Links to More Info: BT843293

Component: TMOS

Symptoms:
When L7 performance FPGA is loaded, "tmsh show sys fpga" shows standard-balanced-fpga. "tmsh list sys fpga" will list the expected type "l7-performance-fpga".

Conditions:
-- iSeries i5000/i7000/i10000/i11000/i15000 platform
-- Pay as you grow (PAYG) license applied
-- L7 performance FPGA is loaded

Impact:
"tmsh show sys fpga" shows standard-balanced-fpga

This is cosmetic and there is no function impact. "tmsh list sys fpga" will list the correct type "l7-performance-fpga".

Workaround:
N/A


842669-6 : Syslog-ng / systemd-journald cannot handle logs with embedded newlines, write trailing content to /var/log/user.log

Links to More Info: BT842669

Component: TMOS

Symptoms:
Systemd-journald cannot handle logs with embedded newlines, write trailing content to /var/log/user.log. Bare ')' being logged to /var/log/user.log., for example:

cat /var/log/user.log
[...]: Deleting file /shared/core/*.core.*
[...]: Deleting file /shared/core/*.core.*
[...] )
[...] )

Conditions:
This occurs when the system logs syslog messages containing embedded newlines, such as

- The cron process tries and fails to send an email because of output from a cron script.
- Modifying the syslog 'include' configuration
- Applying ASM policy configuration change
- GTM.debugprobelogging output from big3d
- iqsyncer mcpd message debug output (log.gtm.level=debug)

Impact:
The logging subsystem accepts syslog messages with embedded newlines, and writes first line to the appropriate file, and remaining lines to /var/log/user.log.

Workaround:
View the logs using journalctl


842193-6 : Scriptd coring while running f5.automated_backup script

Links to More Info: BT842193

Component: iApp Technology

Symptoms:
When the iApp, f5.automated_backup, script is terminated due to the max-script-run-time, the script still continues and finishes, sometimes with scriptd coring and posting error messages in /var/log/ltm:

-- info logger[17173]: f5.automated_backup iApp autobackup: STARTED
-- info logger[17175]: f5.automated_backup iApp autobackup: pem.f5lab.com_20191004.ucs GENERATING

-- err scriptd[13532]: 014f0004:3: script has exceeded its time to live, terminating the script <------ after 20 secs, it continues even after the scriptd core.

-- notice sod[3235]: 01140041:5: Killing /usr/bin/scriptd pid 13532.
-- warning sod[3235]: 01140029:4: high availability (HA) daemon_heartbeat scriptd fails action is restart.
-- info logger[19370]: f5.automated_backup iApp autobackup: pem.f5lab.com_20191004.ucs SAVED LOCALLY
(/var/local/ucs)
-- info logger[19372]: f5.automated_backup iApp autobackup: FINISHED

Conditions:
Configure the iApp application with f5.automated_backup template to do auto-backup at regular intervals.

Impact:
Scriptd core.

Workaround:
Increasing the sys scriptd max-script-run-time higher then the default of 300 seconds might be helpful if the higher timeout allows the script to complete.

For example, if the script is saving a UCS and the save takes 400 seconds, then increasing the max-script-run-time to 430 seconds would allow the script to finish and would work around this issue.


839361-7 : iRule 'drop' command does not drop packets when used in DNS_RESPONSE

Links to More Info: BT839361

Component: Global Traffic Manager (DNS)

Symptoms:
The iRule 'drop' command may not drop a DNS response when called under DNS_RESPONSE event.

Conditions:
iRule drop is used under DNS_RESPONSE event.

Impact:
DNS response may be improperly forwarded to the client.

Workaround:
Use DNS::drop instead.


838597-5 : Unable to load license/dossier when going down for vCMP

Links to More Info: BT838597

Component: TMOS

Symptoms:
After provisioning vCMP on the BIG-IP system and rebooting, vcmpd might core during the shutdown with a log message in /var/log/ltm "Unable to load license/dossier: Failed to connect to HAL via halmsg".

Conditions:
This occurs when rebooting the BIG-IP system after provisioning vCMP.

Impact:
This crash does not impact any functionality - system is shutting down anyway

Workaround:
None


837101-3 : AVR and BIG-IQ stats show N/A bar for Source IP and domain name on DNS query packet

Links to More Info: BT837101

Component: Advanced Firewall Manager

Symptoms:
AVR and BIG-IQ stats show an N/A bar for Source IP and domain name fields on DNS query packets, while the correct IP and domain name is shown in other bars.

Conditions:
-- AFM is provisioned.
-- DNS traffic is processed.

Impact:
No functional impact, but incorrect and redundant results are shown in AVR.

Workaround:
None.


831737-3 : Memory Leak when using Ping Access profile

Links to More Info: BT831737

Component: Access Policy Manager

Symptoms:
The memory usage by pingaccess keeps going up when sending request with expired session cookie to a virtual server with PingAccess Profile.

Conditions:
1. BIG-IP virtual server that contains PingAccess Profile.
2. Request sent with expired session cookie.

Impact:
Memory leak occurs in which ping access memory usage increases.


830073-7 : AVRD may core when restarting due to data collection device connection timeout

Links to More Info: BT830073

Component: Application Visibility and Reporting

Symptoms:
Avrd crashes, one or more core avrd files exist in /var/core

Conditions:
-- A BIG-IP system is managed by BIG-IQ via secure channel
-- Avrd is restarted.

Impact:
Avrd cores as it is shutting down. During avrd shutdown, the BIG-IQ data collection device (DCD) is unreachable for 10 minutes

Workaround:
None.


829657-5 : Possible TMM crash with a multi-IP PEM subscriber configured with more than 16 IP addresses

Links to More Info: BT829657

Component: Policy Enforcement Manager

Symptoms:
TMM crash.

Conditions:
PEM configured with a multi-IP subscriber with more than 16 IP addresses.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Do not create a PEM subscriber with more than 16 IP addresses.


829653-1 : Memory leak due to session context not freed

Links to More Info: BT829653

Component: Policy Enforcement Manager

Symptoms:
Memory increases slowly

Conditions:
A PEM iRule times out

Impact:
Memory could be exhausted depending on the frequency of the command timeouts


829021-1 : BIG-IP does not account a presence of http2 profile when response payload is modified

Links to More Info: BT829021

Component: Local Traffic Manager

Symptoms:
The BIG-IP system might close a connection when the HTTP response payload is modified and sent without chunking encoding. If communication goes over an HTTP connection, the BIG-IP system closes a connection to tell a client that a response is served. With HTTP/2 connections, an unsized response is marked with the END_STREAM flag. This case is not accounted for, and the BIG-IP system closes HTTP communication with a server anyway.

Conditions:
-- A virtual server has an http/2 profile configured on the client side.
-- There are other profiles configured which can modify the HTTP response payload.

Impact:
The BIG-IP system wastes resources not reusing a server side HTTP connection when an unsized response is sent over an HTTP/2 connection to a client.

Workaround:
None.


819645-1 : Reset Horizon View application does not work when accessing through F5 APM

Links to More Info: BT819645

Component: Access Policy Manager

Symptoms:
You are unable to reset VMware applications from a Windows VM client, Android VM client or HTML5 client.

Conditions:
-- VMware Horizon Proxy configured via an iApp on APM
-- Access the VM applications via APM webtop through native client /HTML5 client for windows or access applications via native client on android

Impact:
Impaired reset option functionality


814273-6 : Multicast route entries are not populating to tmm after failover

Links to More Info: BT814273

Component: TMOS

Symptoms:
Multicast route entries are not populating in tmm after failover. ZebOS has the multicast entries, but tmm does not.

Conditions:
-- High Availability (HA) configured, with multicast traffic.
-- A failover occurs.

Impact:
Multicast traffic does not pass through properly

Workaround:
Clear the multicast entries in ZebOS manually:
> clear ip mroute *
> clear ip igmp group


812693-5 : Connection in FIN_WAIT_2 state may fail to be removed

Links to More Info: BT812693

Component: Local Traffic Manager

Symptoms:
If a connection that has a fully closed client-side, but a server-side still in FIN_WAIT_2, receives a SYN matching the same connflow, the idle time is reset. This can result in the fin-wait-2-timeout never being reached. The SYN will be responded to with a RST - 'TCP Closed'

Conditions:
- Client side connection has been fully closed. This may occur if a client SSL profile is in use and an 'Encrypted Alert' has been received.
- Server side has sent a FIN which has been ACK'd, but no FIN has been received from the server.
- SYN received matching the existing connflow before the FIN-WAIT-2-timeout has been reached (300 default).

Impact:
Connection may fail to be removed in a timely manner. New connection attempts are RST with 'TCP Closed'

Workaround:
You can use either of the following:
-- Ensure servers are sending FIN's so as not to leave the connection in a FIN_WAIT_2 state.

-- Mitigate the issue by lowering the FIN-WAIT-2-timeout to a smaller value, e.g., FIN-WAIT-2-timeout 10.


809089-4 : TMM crash after sessiondb ref_cnt overflow

Links to More Info: BT809089

Component: TMOS

Symptoms:
Log message that indicates this issue may happen:
session_reply_multi: ERROR: unable to send session reply: ERR_BOUNDS
[...] valid s_entry->ref_cnt

Conditions:
-- Specific MRF configuration where all 500 session entries are owned by a single tmm.

-- High rate of session lookups with a lot of entries returned.

Note: This issue does not affect HTTP/2 MRF configurations.

Impact:
TMM core: the program terminates with signal SIGSEGV, Segmentation fault. Traffic disrupted while tmm restarts.

Workaround:
1. Change MRF configuration to spread session lookups across multiple tmms.
2. Reduce the sub-key entries to far below 500.


808913-1 : Big3d cannot log the full XML buffer data

Links to More Info: BT808913

Component: Global Traffic Manager (DNS)

Symptoms:
Big3d cannot log the full XML buffer data:

-- notice big3d[12212]: 012b600d:5: Probe from ::ffff:11.11.1.21:45011: len 883/buffer = <vip>.

Conditions:
The gtm.debugprobelogging variable is enabled.

Impact:
Not able to debug big3d monitoring issues efficiently.

Workaround:
None.


808801-6 : AVRD crash when configured to send data externally

Links to More Info: BT808801

Component: Application Visibility and Reporting

Symptoms:
AVRD can crash repeatedly when configured to send telemetry data externally.

Conditions:
-- AVR is configured to send telemetry data to an external source (like connection with BIG-IQ).
-- Large number of config objects in the system, such as virtual servers and pool members.

Impact:
AVRD process crashes, and telemetry data is not collected.

Workaround:
Split the configuration updates into smaller batches


808481-6 : Hertfordshire county missing from GTM Region list

Links to More Info: BT808481

Component: TMOS

Symptoms:
Hertfordshire county is missing from Regions in the United Kingdom Country/State list.

Conditions:
-- Creating a GTM region record.
-- Attempting to select Hertfordshire county for the United Kingdom.

Impact:
Cannot select Hertfordshire county from United Kingdom Country/State list.

Workaround:
None.


807569-3 : Requests fail to load when backend server overrides request cookies and Bot Defense is used

Links to More Info: BT807569

Component: Application Security Manager

Symptoms:
When Bot Defense is used on the backend server that overrides request cookies, requests to non-HTML resources may fail, or may receive the whitepage JavaScript challenge. An example is when a back-end server responds with a Set-Cookie header containing empty values for each cookie request cookie it does not recognize.

Conditions:
-- Bot Defense is enabled.
-- Backend server is overriding the Bot Defense cookies with the TS prefix.

Impact:
Some URLs fail to load following the JavaScript challenge.

Workaround:
Use an iRule to strip the TSPD_101 cookie from the request before forwarding it to the backend:

when HTTP_REQUEST_RELEASE {
    HTTP::cookie remove "TSPD_101"
}


807309-5 : Incorrect Active/Standby status in CLI Prompt after failover test

Links to More Info: BT807309

Component: TMOS

Symptoms:
After running 'promptstatusd -y' to check current failover status, it displays an incorrect Active/Standby status in the CLI prompt.

Conditions:
This occurs under the following conditions:

1. Modify the db variable: bigdb failover.state.
2. Check that /var/prompt/ps1 and CLI prompt reflect the setting.
2. Reboot the BIG-IP system.

Impact:
Status shown in the prompt does not change.

Workaround:
Do not run 'promptstatusd -y' command manually.

The db variable 'failover.state is a status-reporting variable. The system does not report status manually set to something other than the actual status.

Note: 'promptstatusd' is not a BIG-IP user command, it is a daemon. It is highly unlikely that manually running this command will produce information that is useful or relevant to the status being sought.


805561-1 : Change of pool configuration in OneConnect environment can impact active traffic

Links to More Info: BT805561

Component: Local Traffic Manager

Symptoms:
In OneConnect environments, when the default pool is updated for the first time, active connections reconnect to new pool members. Further update to pool configuration has no impact on traffic.

Conditions:
-- Virtual server configured with OneConnect profile.
-- Default pool is updated when active connections are present.

Impact:
Active traffic disrupted.

Workaround:
None.


804529-1 : REST API to /mgmt/tm/ltm/pool/members/stats will fail for some pools

Links to More Info: BT804529

Component: TMOS

Symptoms:
GET requests to REST endpoint /mgmt/tm/ltm/pool/members/stats may fail with error 404

Conditions:
This impacts pools which start with the letter 'm'. This because those endpoints contain objects with incorrect selflinks

For example
1. Query to below pool (that starts with letter 'm') will work as it contains the right selflink
       - Pool: "https://localhost/mgmt/tm/ltm/pool/~Common~m/stats"
       - selfLink: "https://localhost/mgmt/tm/ltm/pool/~Common~m/stats?ver=x.x.x.x"

2. Query to below pool (that does NOT start with letter 'm') may not work as it contains the wrong selflink
       - Pool: "https://localhost/mgmt/tm/ltm/pool/members/~Common~a/stats"
       - selfLink: "https://localhost/mgmt/tm/ltm/pool/members/~Common~a/stats?ver=x.x.x.x"
         
In above example you will notice the word 'members' shows up expectedly in selflink for case 2

Impact:
You may see errors with GET requests to REST endpoint /mgmt/tm/ltm/pool/members/stats

Workaround:
You may use the following workarounds

1. Use /mgmt/tm/ltm/pool/members/stats, which does return the pool member stats for every pool

2. For each pool member in /mgmt/tm/ltm/pool, issue a GET for:

/mgmt/tm/ltm/pool/<pool>/members/<member>/stats


803157-4 : LTM log contains shutdown sequence logs after boot_marker as logs are buffered until BIG-IP reboots

Links to More Info: BT803157

Component: TMOS

Symptoms:
In reboot case, the BIG-IP system buffers the shutdown sequence log messages and writes them to disk once the syslog service starts during the boot process. The boot_marker message is written before shutdown messages sync to disk. This leads to out-of-sequence log messages, making it difficult to determine when the service stop occurred.

Conditions:
Reboot the BIG-IP system.

Impact:
Log messages appear out of order. It is difficult to tell whether service stop happened as part of reboot, or any error during the subsequent boot process.

Workaround:
None.


798885-6 : SNMP response times may be long when processing requests

Links to More Info: BT798885

Component: TMOS

Symptoms:
SNMP queries to the BIG-IP system may take longer (up to 15% more time) to process on BIG-IP systems with large configurations. mcpd CPU usage increases by a small amount (up to 10%) during these queries.

Conditions:
-- Large configuration.
-- Using SNMP to query statistics on the BIG-IP system.

Impact:
A small increase in response time to SNMP requests to the BIG-IP. Some SNMP queries might fail due to timeouts. mcpd CPU usage is slightly elevated while processing these queries.

Workaround:
If the responses to SNMP queries are taking too long, MCPD and SNMPD may overburden the control plane. It may be necessary to lengthen the timeout and retry values used by the SNMP client. It may also be helpful to trim what is queried, for example, not repetitively walking large tables like the Virtual Server or LTM Pool Member tables for statistics.


797573-1 : TMM assert crash with resulting in core generation in multi-blade chassis

Links to More Info: BT797573

Component: Local Traffic Manager

Symptoms:
TMM crashes while changing settings.

Conditions:
Seen on multi-blade chassis with either one of the options:
-- Running system with DoS and other traffic.
-- Create a new vCMP guest and deploy it.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None.


796985-4 : Default IPv4 IP address is assigned to Alt-Address in isolated vCMP guest; vCMP host or guest are upgraded and guest is 'Inoperative'

Links to More Info: BT796985

Component: TMOS

Symptoms:
VCMP host or guest is upgraded, and the vCMP guest is 'Inoperative', with messages similar to the following in /var/log/ltm:

-- warning clusterd[1546]: 013a0005:4: Clusterd using /VERSION for SW specification.
-- info clusterd[1546]: 013a0023:6: Blade 1: No info received from slot: Starting up
-- err clusterd[1546]: 013a0004:3: result {
-- err clusterd[1546]: 013a0004:3: result.code 17237812
-- err clusterd[1546]: 013a0004:3: result.attribute float_mgmt2_ip
-- err clusterd[1546]: 013a0004:3: result.message 01070734:3: Configuration error: Cluster alt-address: 192.168.1.246 cannot be the same address family as cluster address: 192.168.1.246
-- err clusterd[1546]: 013a0004:3: }
-- err clusterd[1546]: 013a0004:3: Per-invocation log rate exceeded; throttling.
-- notice clusterd[1546]: 013a0006:5: Disconnecting from mcpd.
-- info clusterd[1546]: 013a0007:6: clusterd stopping...

Conditions:
-- Isolated vCMP guest.
-- Both 'Address' and 'Alt-Address' are assigned the same IPv4 address.
-- Upgrade occurs.

Impact:
Upon host/guest upgrade, vCMP guest is 'Inoperative'.

Workaround:
-- For new vCMP guests, or prior to booting the vCMP guest to an affected version for the first time, assign it a management-ip from the vCMP host. This prevents the alt-address from being assigned and the issue from occurring on subsequent upgrades.

tmsh modify vcmp <guest_name> management-ip 192.168.1.246/24

-- For existing vCMP guests already on an affected version, but not currently experiencing the issue, assign a management-ip from the vCMP host and remove the alt-address from within the vCMP guest to prevent the issue from occurring in a future upgrade or reboot:

    host# tmsh modify vcmp guest <guest-name> management-ip 192.168.1.246/24

    guest# tmsh modify sys cluster default alt-address none

-- When already upgraded and seeing the issue on a guest, set a management-ip from the vCMP host and run the following commands within the guest to remove the alternate address from the configuration file:

    host# tmsh modify vcmp guest <guest-name> management-ip 192.168.1.246/24

    guest# bigstart stop clusterd
    guest# sed -i s/alt_addr=.*// -i /shared/db/cluster.conf
    guest# bigstart start clusterd


796065-2 : PingAccess filter can accumulate connections increasing memory use.

Links to More Info: BT796065

Component: Access Policy Manager

Symptoms:
Currently the maximum http header count value for ping access is 64. The connection to the backend is aborted if there are more than 64 headers.

Conditions:
1. Ping access is configured.
2. The HTTP header count is more than 64.

Impact:
Connection is aborted by the BIG-IP system users are unable to access the backend.

Workaround:
None


795633-1 : GUI and REST API unable to add virtual servers containing a space in the name to a pool

Links to More Info: BT795633

Component: Global Traffic Manager (DNS)

Symptoms:
The GUI and REST API are unable to add virtual servers containing a space in the name to a pool.

Conditions:
Virtual server name contains a space.

Impact:
Unable to manage pool members if the virtual server contains a space in the name.

Workaround:
Use tmsh.


791669-5 : TMM might crash when Bot Defense is configured for multiple domains

Links to More Info: BT791669

Component: Application Security Manager

Symptoms:
TMM might crash and generate a core file when using a Bot Defense profile that is configured for multiple domains.

Conditions:
Bot Defense is configured with multiple 'Related Site Domains' and attached to a virtual server.

Impact:
TMM crash with core. Traffic disrupted while tmm restarts.

Workaround:
None,


788257-5 : Bigd.mgmtroutecheck setting ignored by in-tmm monitors after bigstart restart

Links to More Info: BT788257

Component: In-tmm monitors

Symptoms:
The bigd.mgmtroutecheck db variable can be enabled to prevent monitor traffic from going through the management interface (for information, see K14549: Overview of the 'bigd.mgmtroutecheck' database key :: https://support.f5.com/csp/article/K14549); however, if in-tmm monitors are configured, the setting will be ignored after a bigstart restart.

Conditions:
-- bigd.mgmtroutecheck is enabled
-- bigd.tmm is enabled (i.e., in-tmm monitors are configured).
-- tmm has a route configured to the management interface.
-- A pool member exists that matches a route through the management interface.
-- bigstart restart is performed.

Impact:
In-tmm monitor traffic uses the management interface if there is a route to the pool member via the management interface, even when bigd.mgmtroutecheck indicates it is enabled.

Workaround:
None


780745-5 : TMSH allows creation of duplicate community strings for SNMP v1/v2 access

Links to More Info: BT780745

Component: TMOS

Symptoms:
TMSH allows you to create multiple access records with the same IP protocol, same Source IP network, and same community string.

Conditions:
Duplicate access records are created in TMSH.

Impact:
Unintended permissions can be provided when an undesired access record with the correct community string is matched to a request instead of the desired access record.

Workaround:
Use the Configuration Utility to manage SNMP v1/2c access records. (The GUI properly flags the error with the message:
The specified SNMP community already exists in the database.

If you use tmsh, ensure that community strings remain unique within each Source IP Network for each IP protocol.


780437-8 : Upon rebooting a VIPRION chassis provisioned as a vCMP host, some vCMP guests can return online with no configuration.

Links to More Info: BT780437

Component: TMOS

Symptoms:
It is possible, although unlikely, for a vCMP host to scan the /shared/vmdisks directory for virtual disk files while the directory is unmounted.

As such, virtual disk files that existed before the reboot will not be detected, and the vCMP host will proceed to create them again.

The virtual disks get created again, delaying the guests from booting. Once the guests finally boot, they have no configuration.

Additionally, the new virtual disk files are created on the wrong disk device, as /shared/vmdisks is still unmounted.

Symptoms for this issue include:

-- Running the 'mount' command on affected host blades and noticing that /shared/vmdisks is not mounted.

-- Running the 'tmsh show vcmp guest' command on affected host blades (early on after the reboot) and noticing some guests have status 'installing-vdisk'.

-- Running the 'lsof' command on affected and unaffected host blades shows different device numbers for the filesystem hosting the virtual disks, as shown in the following example (note 253,16 and 253,1):

qemu-kvm 19386 qemu 15u REG 253,16 161061273600 8622659 /shared/vmdisks/s1g2.img

qemu-kvm 38655 qemu 15u REG 253,1 161061273600 2678798 /shared/vmdisks/s2g1.img

-- The /var/log/ltm file includes entries similar to the following example, indicating new virtual disks are being created for one of more vCMP guests:

info vcmpd[x]: 01510007:6: VDisk (s2g1.img/2): Adding.
info vcmpd[x]: 01510007:6: VDisk (s2g1.img/2): Syncing with MCP - [filename:s2g1.img slot:2 installed_os:0 state:0]
notice vcmpd[x]: 01510006:5: Guest (s2g1): Creating VDisk (/shared/vmdisks/s2g1.img)
info vcmpd[x]: 01510007:6: VDisk (s2g1.img/2): Syncing with MCP - [filename:s2g1.img slot:2 installed_os:0 state:1]
info vcmpd[x]: 01510007:6: Guest (s2g1): VS_ACQUIRING_VDISK->VS_WAITING_INSTALL
info vcmpd[x]: 01510007:6: Guest (s2g1): VS_WAITING_INSTALL->VS_INSTALLING_VDISK
notice vcmpd[x]: 01510006:5: Guest (s2g1): Installing image (/shared/images/BIGIP-12.1.2.0.0.249.iso) to VDisk (/shared/vmdisks/s2g1.img).
info vcmpd[x]: 01510007:6: VDisk (s2g1.img/2): Syncing with MCP - [filename:s2g1.img slot:2 installed_os:0 state:2]

Conditions:
-- VIPRION chassis provisioned in vCMP mode with more than one blade in it.

-- Large configuration with many guests.

-- The VIPRION chassis is rebooted.

-- A different issue, of type 'Configuration from primary failed validation' occurs during startup on one or more Secondary blades. By design, MCPD restarts once on affected Secondary blades, which is the trigger for this issue. An example of such a trigger issue is Bug ID 563905: Upon rebooting a multi-blade VIPRION or vCMP guest, MCPD can restart once on Secondary blades.

Impact:
-- Loss of entire configuration on previously working vCMP guests.

-- The /shared/vmdisks directory, in its unmounted state, may not have sufficient disk space to accommodate all the virtual disks for the vCMP guests designated to run on that blade. As such, some guests may fail to start.

-- If you continue using the affected guests by re-deploying configuration to them, further configuration loss may occur after a new chassis reboot during which this issue does not happen. This occurs because the guests would then be using the original virtual disk files; however, their configuration may have changed since then, and so some recently created objects may be missing.

Workaround:
There is no workaround to prevent this issue. However, you can minimize the risk of hitting this issue by ensuring you are running a software version (on the host system) where all known 'Configuration from primary failed validation' issues have been resolved.

If you believe you are currently affected by this issue, please contact F5 Networks Technical Support for assistance in recovering the original virtual disk files.


779185-1 : Forward zone deleted when wideip updated

Links to More Info: BT779185

Component: Global Traffic Manager (DNS)

Symptoms:
When a forward zone is configured in zonerunner, and a wideip is configured in the same zone, BIG-IP may delete the bind zone whenever the wide ip's pool members are modified.

Subsequent modifications of the same zone will then result in a new primary zone being created in bind.

Conditions:
- A forward zone is configured in bind (zonerunner)
- The pool members associated with a wideip are modified

Impact:
Queries that do not match wideips are passed to bind for processing, and are no longer forwarded to the nameserver configured in the forward zone.

Workaround:
- Recreate the zonerunner forward zone after modifying the wideip


779137-7 : Using a source address list for a virtual server does not preserve the destination address prefix

Links to More Info: BT779137

Component: Local Traffic Manager

Symptoms:
Configuring a network virtual server with a source address list causes the system to treat the virtual server as a host.

Conditions:
-- Configure a source address list on the virtual server.
-- Configure a network address for the destination of the virtual server (not an address list).

Impact:
Traffic does not flow to the virtual server as expected.

Workaround:
See K58807232


778513-3 : APM intermittently drops log messages for per-request policies

Links to More Info: BT778513

Component: TMOS

Symptoms:
APM may intermittently drop log messages, leading to missing information on policy execution or other events.

Conditions:
Using APM per-request policies, or ACCESS::log iRule commands.

Impact:
Administrator may fail to report certain logging events, hindering troubleshooting or auditing efforts.

Workaround:
No workaround is possible. When reviewing APM logs, keep in mind that during periods of high activity (greater than 100 log messages in 1-to-2 seconds) that the system may drop some log messages.


778501-5 : LB_FAILED does not fire on failure of HTTP/2 server connection establishment

Links to More Info: BT778501

Component: Local Traffic Manager

Symptoms:
When the server connection fails to be established due to server being down or actively rejecting the connection, LB_FAILED should fire and allow a new destination to be selected via iRule.

Conditions:
- iRule with LB_FAILED event
- server connection establishment fails

Impact:
Selection of a new destination via LB_FAILED is not possible, thus the client connection will be aborted.

Workaround:
No workaround available.


777389-7 : In rare occurrences related to PostgreSQL monitor, the mcpd process restarts

Links to More Info: BT777389

Component: TMOS

Symptoms:
Possible indications include the following:

-- Errors such as the following may appear in ltm/log:

   - notice postgres[10872]: [466-1] WARNING: pgstat wait timeout.
   - notice sod[27693]: 01140041:5: Killing /usr/bin/mcpd pid 7144.
   - BD_CONF|ERR| ...failed to connect to mcpd after 5 retries, giving up...
   - BD_CONF|ERR| ...can't read message from mcp conn, status:16908291.
   - BD_MISC|CRIT| ...Received SIGABRT - terminating.

-- Errors such as the following may appear in the dwbld/log:

   - Couldn't send BLOB notification - MCP err 16908291.
   - Got a terminate/abort signal - terminating ...
   - Terminating mcp_bridge thread.

-- Processes may restart unexpectedly, including mcpd, bd, and postgresql.

Conditions:
-- The 'mcpd' process attempts to read monitoring data from the PostgreSQL server, but no data is available.

-- A contributing factor might be that the AFM module is licensed but not configured.

Impact:
Failing to receive a monitoring response from the SQL server, MCPD goes into an infinite loop and skips the heartbeat report, resulting in its restart. While MCPD is restarting, the system is offline and does not process traffic. After restart, system operation returns to normal.

Workaround:
The chance of occurrence can be minimized by making sure that control-plane processes have sufficient memory to run efficiently.


776117-1 : BIG-IP Virtual Edition virtio driver incompatible with Q35 machine type

Links to More Info: BT776117

Component: TMOS

Symptoms:
The BIG-IP Virtual Edition's virtio driver is incompatible with the Q35 machine type.

Conditions:
-- BIG-IP Virtual Edition with the virtio driver.
-- Setting the machine type to Q35 on the hypervisor.

Impact:
The BIG-IP will not use the virtio driver, using the sock (or unic, in versions prior to 14.1.0) driver instead.


775845-6 : Httpd fails to start after restarting the service using the iControl REST API

Links to More Info: BT775845

Component: TMOS

Symptoms:
After restarting httpd using the iControl REST API, httpd fails to start, even with a subsequent restart of httpd at the command line.

Similar to the following example:

config # restcurl -u admin:admin /tm/sys/service -X POST -d '{"name":"httpd", "command":"restart"}'
{
  "kind": "tm:sys:service:restartstate",
  "name": "httpd",
  "command": "restart",
  "commandResult": "Stopping httpd: [ OK ]\r\nStarting httpd: [FAILED]\r\n(98)Address already in use: AH00072: make_sock: could not bind to address n.n.n.n:n\nno listening sockets available, shutting down\nAH00015: Unable to open logs\n"
}

config # tmsh restart sys service httpd
Stopping httpd: [ OK ]
Starting httpd: [FAILED]

Conditions:
Restarting httpd service using iControl REST API.

Impact:
Httpd fails to start.

Workaround:
To recover from the failed httpd state, you can kill all instances of the httpd daemon and start httpd:

killall -9 httpd

tmsh start sys service httpd


775797-5 : Previously deleted user account might get authenticated

Links to More Info: BT775797

Component: TMOS

Symptoms:
A user account which may have originally been manually configured as a local user (auth user) but may have since been removed, might still get authenticated and be able to modify the BIG-IP configuration.

Conditions:
-- User account configured as local user.
-- The user account is deleted later.

(Note: The exact steps to produce this issue are not yet known).

Impact:
The deleted user that no longer exists in the local user list and which is also not explicitly authorized by remote role groups, can get authenticated. The deleted user is also able to modify the BIG-IP configuration via iControl.

Workaround:
None.


766593-7 : RESOLV::lookup with bytes array input does not work when length is exactly 4, 16, or 20

Links to More Info: BT766593

Component: Global Traffic Manager (DNS)

Symptoms:
RESOLV::lookup returns empty string.

Conditions:
Input bytes array is at length of 4, 16, or 20.

For example:
[RESOLV::lookup @dnsserveraddress -a [binary format a* $host1.d1test.com]]

Impact:
RESOLV::lookup returns empty string.

Workaround:
Use lindex 0 to get the first element of the array.

For example:
[RESOLV::lookup @dnsserveraddress -a [lindex [binary format a* $host1.d1test.com] 0]]


763349-4 : AVRD can crash with core when HTTPS connection to BIG-IQ DCD node times out

Links to More Info: BT763349

Component: Application Visibility and Reporting

Symptoms:
avrd application on BIG-IP crashes; core is generated.

Conditions:
-- The BIG-IP is configured to send data to BIG-IQ DCD node via the HTTPS protocol.

-- Connection to DCD is established but response does not arrive within the timeout interval, so the connection times out.

Impact:
avrd crashes, and a core is generated.

Workaround:
None.


760982-3 : An NLRI with a default route information is not propagated on 'clear ip bgp <neighbor router-id> soft out' command in some scenarios

Links to More Info: BT760982

Component: TMOS

Symptoms:
Soft out reset does not work for the default route.

Conditions:
-- BGP enabled
-- A route configuration change is made and 'clear ip bgp <IP-addr> soft in/out' is executed

Impact:
A default-route is not propagated in Network Layer Reachability Information (NLRI) by 'soft out' request.

Workaround:
None


760496-4 : Traffic processing interrupted by PF reset

Links to More Info: BT760496

Component: TMOS

Symptoms:
CPU usage increases after PF reset. Traffic between client and server is interrupted.

Conditions:
-- E710 NICs are used.
-- Reset PF.

Impact:
The BIG-IP instance requires a restart after PF reset to resume traffic processing.

Workaround:
Restart the BIG-IP device.


760400-1 : High number of vcmp guests on clusters and discovery appliances may result in retries for guest deployment

Links to More Info: BT760400

Component: TMOS

Symptoms:
- Guests coming up with retries and
- Messages like below in the LTM log

Guest (XXX): Killing VM process.

Conditions:
- Clusters or discovery appliances host
- High number of vcmp guests being deployed

Impact:
VCMP guests may become unable to pass traffic.


760355-4 : Firewall rule to block ICMP/DHCP from 'required' to 'default'

Links to More Info: BT760355

Component: Advanced Firewall Manager

Symptoms:
If firewall is configured on the management port with an ICMP rule, after upgrading to v14.1.x or later, the ICMP rule does not work.

Conditions:
-- Firewall is configured on the management port.
-- Firewall is configured with an ICMP rule to block.

Impact:
ICMP packets cannot be blocked with a firewall rule to drop on management port. ICMP packets are allowed from the management port.

Workaround:
Run the following commands after upgrading to v14.1.x or later from earlier versions.

# /sbin/iptables -N id760355
# /sbin/iptables -I INPUT 1 -j id760355
# /sbin/iptables -A id760355 -i mgmt -p icmp --icmp-type 8 -s 172.28.4.32 -j DROP


760354-7 : Continual mcpd process restarts after removing big logs when /var/log is full

Links to More Info: BT760354

Component: TMOS

Symptoms:
The BIG-IP device suddenly stops passing traffic. You might see errors similar to the following:

err mcpd[15230]: 01070596:3: An unexpected failure has occurred, TAP creation failed (tmm): Permission denied - net/validation/routing.cpp, line 168, exiting...

Conditions:
This might occur when when /var/log is full and then you remove big logs.

Impact:
The mcpd process restarts continuously. This occurs because tmm blocks mcpd from restarting after /var/log fills up.

Workaround:
Empty the contents of big size log files under /var/log and reboot the BIG-IP system.

If that does not resolve the problem, restart all processes (bigstart restart) or reboot the box.


759258-7 : Instances shows incorrect pools if the same members are used in other pools

Links to More Info: BT759258

Component: TMOS

Symptoms:
Monitor 'Instances' tab shows incorrect pools if the same members are used in other pools.

Conditions:
Steps to Reproduce:

1. Create custom monitor or use system default.
2. Assign that monitor to a test pool.
3. Navigate to Local Traffic :: Monitors, click the test monitor, then select the Instances tab.

Impact:
The test pool is displayed, as well any other pools that use the same member or members (but with other monitors assigned).

Workaround:
None.


758491-5 : When using NetHSM integration, after upgrade to 14.1.0 or later (or creating keys using fipskey.nethsm), BIG-IP cannot use the keys

Links to More Info: BT758491

Component: Local Traffic Manager

Symptoms:
For Thales:
The ltm/log shows SSL handshake failures with similar lines (this is for Diffie-Hellman Key Exchange):

-- warning bigip1 tmm1[28813] 01260013 SSL Handshake failed for TCP 192.0.2.1:5106 -> 192.0.2.200:5607
-- warning bigip1 tmm1[28813] 01260009 Connection error: ssl_hs_vfy_sign_srvkeyxchg:13583: sign_srvkeyxchg (80)
-- debug bigip1 tmm1[28813] 01260036 FIPS acceleration device error: fips_poll_completed_reqs: req: 4 status: 0x1 : Cancel
-- err bigip1 pkcs11d[26259] 01680002 Key table lookup failed. error.

After enabling pkcs11d debug, the pkcs11d.debug log shows:

-- 2019-10-03 11:21:50 [6399] t00075a9a462b0000: pkcs11: 000008D9 D obj_match_attribute class CKO_PRIVATE_KEY attribute CKA_CLASS
-- 2019-10-03 11:21:50 [6399] t00075a9a462b0000: pkcs11: 000008D9 D obj_match_attribute type CKA_CLASS matches
-- 2019-10-03 11:21:50 [6399] t00075a9a462b0000: pkcs11: 000008D9 D obj_match_attribute class CKO_PRIVATE_KEY attribute CKA_ID
-- 2019-10-03 11:21:50 [6399] t00075a9a462b0000: pkcs11: 000008D9 D obj_match_attribute type CKA_ID does not match <===


For Safenet:
-- warning tmm1[17495]: 01260009:4: Connection error: ssl_hs_vfy_sign_srvkeyxchg:13544: sign_srvkeyxchg (80)
-- warning tmm1[17495]: 01260013:4: SSL Handshake failed for TCP 10.1.1.11:6009 -> 10.1.1.201:443
-- err pkcs11d[5856]: 01680002:3: Key table lookup failed. error.

Conditions:
1. Keys were created on earlier versions of BIG-IP software, no matter if using tmsh (Safenet) or using fipskey.nethsm (Thales, Safenet) and the device was upgraded to 14.1.0 or later.

2. Keys were created on BIG-IP v14.1.0 or later directly, using fipskey.nethsm (Thales). For Safenet, fipskey.nethsm was deprecated in 14.0.0.

Impact:
SSL handshake failures.

Workaround:
There are two workarounds:
-- Re-create the keys using tmsh command.

IMPORTANT: This workaround is suitable for deployments that are new and not in production.


-- Re-import the keys from nethsm using:
tmsh install sys crypto key <key_label> from-nethsm


You can find the key_label here:
-- The rightmost string in the output of the Thales command:
nfkminfo -l

-- The string after label= in the 'cmu list' command for Safenet.


757787-5 : Unable to edit LTM/AFM Policies that belong to an Application Service (iApp) using the WebUI.

Links to More Info: BT757787

Component: TMOS

Symptoms:
When creating a new rule or modifying an existing rule in a LTM/AFM Policy policy using the WebUI, the operation fails and an error similar to the following example is returned:

Transaction failed:010715bd:3: The parent folder is owned by application service (/Common/MyPolicy.app/MyPolicy), the object ownership cannot be changed to ().

Conditions:
-- The LTM/AFM Policy belongs to an Application Service (iApp).
-- The modification is attempted via the WebUI.

Impact:
Unable to make changes to existing LTM/AFM Policies.

Workaround:
Use the tmsh utility to make the necessary modifications to the LTM/AFM Policy. For example, the following command modifies an existing rule:

tmsh modify ltm policy myapp.app/Drafts/myapp_l7policy rules modify { 0 { conditions modify { 0 { http-method equals values { GET POST } } } } }


757486-2 : Errors in IE11 console appearing with Bot Defense profile

Links to More Info: BT757486

Component: Application Security Manager

Symptoms:
When Bot Defense profile is used and has Browser Verification enabled to either Verify Before Access, or Verify After Access, Microsoft Internet Explorer v11 (IE11) Browsers may display the following errors in the browser console:

HTML1512: Unmatched end tag.
a.html (26,1)
HTML1514: Extra "<body>" tag found. Only one "<body>" tag should exist per document.
a.html (28,1)

Conditions:
-- Bot Defense profile is enabled with Browser Verification.
-- End user clients are using the IE11 browser.

Impact:
Cosmetic error messages appear in an end user's browser console.

Workaround:
In order to work around this issue, inject the scripts to the '<body>' tag instead of the '<head>' tag. This can be done using this tmsh command:

tmsh mod sys db dosl7.parse_html_inject_tags value after,body,before,/body`


756830-6 : BIG-IP may fail source translation for connections when connection mirroring is enabled on a virtual server that also has source port set to 'preserve strict'

Links to More Info: BT756830

Component: TMOS

Symptoms:
The BIG-IP system may fail source translation for connections matching a virtual server that has connection mirroring enabled and source port selection set to 'preserve strict'.

Conditions:
Connections match a virtual server that has following settings:

- Connection mirroring is enabled.
- Source Port set to 'Preserve Strict'.

In addition, CMP hash selection (DAG mode) on the corresponding VLANs is set to 'Default DAG'.

Impact:
Source translation may fail on BIG-IP system, leading to client connection failures.

Workaround:
You can try either of the following:

-- Do not use the Source Port setting of 'Preserve Strict'.

-- Disable connection mirroring on the virtual server.


755207-3 : Large packets silently dropped on VE mlxvf5 devices

Links to More Info: BT755207

Component: TMOS

Symptoms:
Jumbo frames are disabled by default for Mellanox ConnectX-4 and ConnectX-5 devices using the mlxvf5 driver (i.e., many BIG-IP Virtual Edition (VE) configurations). Packets larger than 1500 bytes are silently dropped. Only packets up to 1500 bytes are supported when jumbo framers are disabled.

Conditions:
BIG-IP VE with SR-IOV using Mellanox ConnectX-4 or ConnectX-5 NICs.

Typically this represents VE configurations running on private Cloud environments such as VMware, KVM, OpenStack, and others.

Note: You can determine your environment by running the following commands:

# tmctl -d blade tmm/device_probed
# tmctl -d blade xnet/device_probed

Configurations exhibiting this issue either:

1. reports a value of 'mlxvf5' in the driver_in_use column in tmm/device_probed, and possibly reports 'tmctl: xnet/device_probed: No such table.'
2. reports a value of 'xnet' in the driver_in_use column in tmm/device_probed, and a value of 'mlxvf5' in the driver_in_use column in xnet/device_probed.

Impact:
Packets larger than 1500 bytes are dropped without a warning.

Workaround:
Enable jumbo frames and then restart tmm.

1. Add the following line to /config/xnet_init.tcl:
drvcfg mlxvf5 jumbo_support 1

2. Restart tmm:
bigstart restart tmm

Important: There are two possible mlxvf5 drivers. It is possible to enable jumbo frames only for the xnet-based driver.

Important: Enabling jumbo frames causes a performance loss for 1500-byte-size packet, but offers higher throughput at lower CPU usage for larger packets. Note that 1500 bytes is the most common size for internet packets.


753712-4 : Incorrect warning: Traffic Matching Criteria's inline source address has been set to any4 from any6 to match inline destination address' address family.

Links to More Info: BT753712

Component: TMOS

Symptoms:
An incorrect warning message is given when the inline source/dest address is changed:

-- warning mcpd[6927]: 01071859:4: Warning generated : Traffic Matching Criteria's inline source address has been set to any4 from any6 to match inline destination address' address family.

Conditions:
This occurs after you create a traffic-matching-criteria (port-list, address-list) with different source and destination addresses.

Impact:
An incorrect and confusing warning message is given. This warning does not affect traffic processing. It is inadvertently triggered when reading the configuration of the traffic matching profile. Virtual servers should continue to work, and the config should load as expected, despite the warning.

Workaround:
None


752077-4 : Kerberos replay cache leaks file descriptors

Links to More Info: BT752077

Component: Access Policy Manager

Symptoms:
APMD reports 'too many open files' error when reading HTTP requests:

-- err apmd[15293]: 01490000:3: HTTPParser.cpp func: "readFromSocket()" line: 113 Msg: epoll_create() failed [Too many open files].
-- err apmd[15293]: 01490000:3: ApmD.cpp func: "process_apd_request()" line: 1801 Msg: Error 3 reading/parsing response from socket 1498. strerror: Too many open files, queue size 0, time since accept

There are file descriptor dumps in /var/log/apm showing many deleted files with name krb5_RCXXXXXX:

-- err apmd[15293]: 01490264:3: 1492 (/shared/tmp/krb5_RCx8EN5y (deleted)) : cloexec, Fflags[0x8002], read-write
-- err apmd[15293]: 01490264:3: 1493 (/shared/tmp/krb5_RCnHclFz (deleted)) : cloexec, Fflags[0x8002], read-write
-- err apmd[15293]: 01490264:3: 1494 (/shared/tmp/krb5_RCKGW8ia (deleted)) : cloexec, Fflags[0x8002], read-write

Conditions:
This failure may happen if the access policy uses Kerberos authentication, Active Directory authentication, or Active Directory query. The conditions under which the Kerberos replay cache leaks is unknown.

Impact:
APM end users experience intermittent log on issues.

Workaround:
None.


751719-5 : UDP::hold/UDP::release does not work correctly

Links to More Info: BT751719

Component: Carrier-Grade NAT

Symptoms:
UDP::hold/UDP::release do not work properly. Connections cannot be deleted and tmm logs an error:

crit tmm14[38818]: 01010289:2: Oops @ 0x2b6b31b:7903: Flow already has peer. Tried to overwrite.

Conditions:
iRule with UDP::hold/UDP::release

Impact:
UDP::hold/UDP::release does not work correctly


751451-4 : When upgrading to v14.0.0 or later, the 'no-tlsv1.3' option is missing from HTTPS monitors automatically created server SSL profiles

Links to More Info: BT751451

Component: Local Traffic Manager

Symptoms:
If there are HTTPS monitor objects that were created using BIG-IP software v12.x, when the BIG-IP is upgraded directly to v14.0.0 or later, the operation automatically creates server SSL profiles for the HTTPS monitors as needed. Those server SSL profile objects do not have 'no-tlsv1.3' included in their 'options' configuration.

Conditions:
-- Having HTTPS monitors configured in v12.x before upgrading.
-- Directly upgrading from v12.x to v14.0.0 or later

Impact:
TLSv1.3 gets enabled on the server SSL profiles.

Workaround:
-- To avoid this issue, upgrade from v12.x to v13.x, and then upgrade to v14.0.0 or later


-- To mitigate this issue, modify the affected profile to disable TLSv1.3.


749757-4 : -s option in qkview help does not indicate maximum size

Links to More Info: BT749757

Component: TMOS

Symptoms:
When running qkview with the -h option to obtain help, the -s (size) option is incorrectly rendered.

It should read:

[ -s <max file size> range:0-104857600 Bytes ]

Conditions:
-- Running qkview -h.
-- Viewing the -s (size) option help.

Impact:
The measurement size, bytes, is missing, which might result in confusion.

Workaround:
Use the -s option as normal, but be advised that the number should be in bytes, and that the maximum number is 104857600.


743826-7 : Incorrect error message: "Can't find pool []: Pool was not found" even though Pool member is defined with port any(0)

Links to More Info: BT743826

Component: Application Visibility and Reporting

Symptoms:
When a pool member is defined with port any(0), calling the GetPoolMember() function, gives an incorrect error message that the pool member was not found.

Conditions:
Pool member with port any(0)

Impact:
Wrong error message printed to avrd.log


739475-6 : Site-Local IPv6 Unicast Addresses support.

Links to More Info: BT739475

Component: Local Traffic Manager

Symptoms:
No reply to Neighbor Advertisement packets.

Conditions:
Using FE80::/10 addresses in network.

Impact:
Cannot use FE80::/10 addressees in network.

Workaround:
N/A


737739-4 : Bash shell still accessible for admin even if disabled

Links to More Info: BT737739

Component: TMOS

Symptoms:
With the administrator role, you have an option in TMUI to disable or restrict terminal access. If you disable or restrict access, the corresponding REST endpoint is neither disabled nor restricted.

Conditions:
Use TMUI as the admin, or as a user with the administrator role, and either of the following:
-- Disable terminal access.
-- Restrict access to TMSH.

Impact:
Users with the Administrator role can obtain shell access via REST.

With terminal access disabled:
-- If you attempt to login using SSH, you will not be to do so.
-- If you make a POST request to the /mgmt/tm/util/bash endpoint with a body that includes a command to run, that command will be run.

With access to TMSH restricted:
-- A POST request to the /mgmt/tm/util/bash endpoint that includes a body with a command to run will be run.

Workaround:
None.


737692-5 : Handle x520 PF DOWN/UP sequence automatically by VE

Links to More Info: BT737692

Component: TMOS

Symptoms:
When BIG-IP VE is running on a host, there is the host interface's Physical Function (PF, the actual interface on the host device), and Virtual Function (VF, a virtual PCI device that is passed to the BIG-IP-VE). If an x520 device's PF is set down and then up, tmm does not recover traffic on that interface.

Conditions:
-- VE is using a VF from a PF.
-- The PF is set down and then up.

Impact:
VE does not process any traffic on that VF.

Workaround:
Reboot VE.


723633-1 : Crypto traffic such as SSL may stop working in certain conditions

Links to More Info: BT723633

Component: TMOS

Symptoms:
Crypto traffic such as SSL traffic processing stopped.

Conditions:
This issues may occur in following condition:

- After configuring SSL profiles on the platforms where crypto hardware such as Intel QAT crypto SSL is present and due to unknown issues if the crypto hardware fails.

Impact:
The BIG-IP device cannot pass crypto traffic.

Workaround:
Refresh the SSL profiles or delete/re-create SSL profiles which process SSL traffic. Crypto traffic will be processed by software codec, it will impact the system performance as crypto traffic will be processed by software codec.

To recover the crypto hardware, reboot the system, if it is a VE/vCMP guest, then reboot host/hypervisor.


721591-2 : Java crashes with core during a basic TLS signature test.

Links to More Info: BT721591

Component: TMOS

Symptoms:
Java crashes with core.

Conditions:
This is a random crash and there are no known conditions for reproducing it.

Impact:
This crash occurs randomly during normal operation and has following impact:
-- Stats are not available.
-- Server health does not improve with mitigation.
-- Valid traffic never reaches the backend.

Workaround:
-- Restart the Java service with "bigstart restart restjavad" or "tmsh restart sys service restjavad".
-- Restart the BIG-IP system.


718291-4 : iHealth upload error does not clear

Links to More Info: BT718291

Component: TMOS

Symptoms:
If an error occurs that sets the iHealth error string, then this string is never cleared.

Conditions:
Setting an invalid hostname for db variable proxy.host.

Impact:
The system reports the following error string: curl: (56) Recv failure: Connection reset by peer. This error message is never cleared, despite running a successful upload. The bogus error message could result in unnecessary confusion after a successful upload.

Workaround:
To clear the error message, run the following command:
/usr/bin/guishell -c "update diags_ihealth_request set error_str='';"


717174-5 : WebUI shows error: Error getting auth token from login provider

Links to More Info: BT717174

Component: Device Management

Symptoms:
Occasionally, the BIG-IP Admin Utility TMUI fails to function correctly and produces the following error:
Error getting auth token from login provider.

This occurs when the BIG-IP REST Daemon restjavad fails to start up properly.

Conditions:
This error most often occurs on the first or second boot after upgrade, and more often on Virtual Edition BIG-IP platforms running on oversubscribed or slow hypervisors.

Impact:
TMUI and any other BIG-IP system components that rely on REST Workers such as: OpenID Connect key rotation discovery, portions of the TMOS Web Configuration Utility, and Guided Configuration (AGC and WGC) fail to function properly.

Workaround:
Restarting the BIG-IP REST daemons restjavad and restnoded will usually correct the problem. To do so, connect to the SSH console and issue the following two commands:

bigstart restart restjavad
bigstart restart restnoded


714705-8 : Excessive 'The Service Check Date check was skipped' log messages.

Links to More Info: BT714705

Component: TMOS

Symptoms:
Large numbers of these warnings are logged into the "ltm" file:

  warning httpd[12345]: 0118000a:4: The Service Check Date check was skipped.

The message appears whenever a new "httpd" instance is launched.

Conditions:
The BIG-IP instance has been installed with a "no service check" license. These licenses are sometimes provided with cloud pre-licensed VE software images.

Impact:
Log files are saturated with many useless warnings. This can hide actual problems and impede their diagnosis.

Workaround:
During manual troubleshooting, commands such as the following may be used to filter the excess warnings:

# grep -v 'Service Check Date check was skipped' ltm | less

The syslog-ng 'include' filter mechanism is another possibility, but this should be attempted only with assistance of the F5 Support team.


713183-7 : Malformed JSON files may be present on vCMP host

Links to More Info: BT713183

Component: TMOS

Symptoms:
-- Many error messages such as the following may appear in the /var/log/ltm file:

  warning vcmpd[7457]: 01510005:4: Failed to update guest stats from JSON file.

-- The output of 'tmsh show vcmp health' may omit some guests.

Conditions:
All needed conditions are not yet defined.

- vCMP is provisioned.
- Guests are deployed.

Impact:
Some vCMP guests may not show up in the output of the command:
 tmsh show vcmp health

In addition, there might be files present named using the following structure:
 /var/run/vcmpd/<guestname>/json/sys-(ha-status|provision|software).json.bad.

There is no functional impact to the guests or to the host, other than these lost tables, which are provided as a convenience to the vCMP host administrator.

Workaround:
In some cases, the condition can be cleared by taking these actions in the guest instance:

1. clsh touch /service/mcpd/forceload

2. clsh reboot

Otherwise, superfluous log messages may be filtered out of local logging by use of a sys syslog 'include' filter.

You can filter messages related to remote/external logging using the procedure in K13333: Filtering log messages sent to remote syslog servers :: https://support.f5.com/csp/article/K13333.


712241-8 : A vCMP guest may not provide guest health stats to the vCMP host

Links to More Info: BT712241

Component: TMOS

Symptoms:
A vCMP guest usually provides the vCMP host with some guest health statistics as a convenience to the vCMP host administrator. These stats are:
-- mgmt/tm/sys/ha-status
-- mgmt/tm/sys/software/status
-- mgmt/tm/sys/software/provision

These tables are created by the host when host vcmpd queries the guest over the vmchannel using REST.

These RESTful queries may sometimes fail, causing the queried vCMP guest to be omitted in the display of the output of the following command: $ tmsh show vcmp guest

Conditions:
-- vCMP provisioned.
-- Guests are deployed.
-- Host vcmpd queries the guest over the vmchannel using REST.

Impact:
There is no functional impact to the guests or to the host, other than these lost tables.

-- Some vCMP guests may not show up in the output of the following command: tmsh show vcmp health
-- Some guests may appear with the wrong status in the GUI. Such as being grey when it should be green.
-- Files containing guest information, kept in:
/var/run/vcmpd/<guestname>/json/(sys-ha-status.json|sys-provision.json|sys-software.json) may be missing from that directory.
-- There might be files present there named using the following structure:
 /var/run/vcmpd/<guestname>/json/sys-(ha-status|provision|software).json.bad.

Workaround:
There is no workaround at this time.


711747-2 : Vcmp_pde_state_memcpy core during http traffic and pfmand resets.

Links to More Info: BT711747

Component: TMOS

Symptoms:
TMM restarts with core file available.

Conditions:
The issue occurs intermittently under the following conditions:

-- System uses pfmand.
-- pfmand health monitoring enabled (sys db pfmand.healthstatus value enable, this is the default).
-- The system is passing http traffic.
-- pfmand is reset (tmsh modify sys pfman device 0/00:0c.5 status reset).

Impact:
Traffic disrupted while TMM restarts.

Workaround:
N/A


708680-4 : TMUI is unable to change the Alias Address of DNS/GTM Monitors

Links to More Info: BT708680

Component: Global Traffic Manager (DNS)

Symptoms:
TMUI (the GUI) is unable to change the Alias Address of DNS/GTM Monitors.

Conditions:
-- Using the GUI.
-- DNS/GTM monitors with alias address.
-- Attempting to change the Alias Address.

Impact:
Cannot change the Alias Address.

Workaround:
Use tmsh.


705869-1 : TMM crashes as a result of repeated loads of the GEOIP database

Links to More Info: BT705869

Component: Global Traffic Manager (DNS)

Symptoms:
TMM crashes.

Conditions:
Repeatedly loading the GeoIP database in rapid succession.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Don't do repeated load of GeoIP Database.


703226-3 : Failure when using transactions to create and publish policies

Links to More Info: BT703226

Component: TMOS

Symptoms:
Use batch mode transactions to create Virtual Servers with Policies containing rules.

Conditions:
Create and publish in the same transaction a Policy containing rules.

Impact:
Operation fails.

This occurs because the system is trying to look up a policy that does not exist because the 'create' operation is not yet complete. This might happen when the create and publish operations occur simultaneously, which might happen in response to scripts from iApps, batch mode creation of policies, UCS load, upgrade operation--all try to create domain trust, and all might include the policy create in the same operation.

Workaround:
Separate the create Policy and publish Policy operations into two transactions when the Policy contains rules.


698594-4 : Cave Creek Crypto hardware reports a false positive of a stuck queue state

Links to More Info: K53752362, BT698594

Component: TMOS

Symptoms:
In some cases, a stuck crypto queue may be erroneously detected on Cave Creek-based systems. This includes BIG-IP 2x00, 4x00, i850, i2x00, i4x00, and HRC-i2800.

The system writes messages similar to the following example to the /var/log/ltm file:

crit tmm3[11707]: 01010025:2: Device error: crypto codec qa-crypto3-3 queue is stuck.
warning sod[4949]: 01140029:4: HA crypto_failsafe_t qa-crypto3-3 fails action is failover.

Conditions:
This issue occurs when all of the following conditions are met:
- Your BIG-IP system uses the Cave Creek encryption hardware.
- You are making use of hardware-based SSL encryption.
- The BIG-IP system is under heavy load.

Impact:
The system reports device errors in logs, and takes crypto high availability (HA) action, possibly resulting in failover.

Workaround:
To work around this issue, you can modify the crypto queue timeout value. To do so, perform the following procedure.

Impact of workaround: Performing the following procedure should not have a negative impact on your system.

1. Log in to the BIG-IP system as an administrative user.

2. Log in to the Traffic Management Shell (tmsh) by running the following command:
tmsh

3. To change the crypto queue timeout value, run the following command:
modify /sys db crypto.queue.timeout value 300

4. Save the change by running the following command:
save sys config

Increasing the crypto queue timeout gives the hardware enough time to process all queued request.


696363-7 : Unable to create SNMP trap in the GUI

Links to More Info: BT696363

Component: TMOS

Symptoms:
Trying to create a SNMP trap may fail in the GUI with the following error message: An error has occurred while trying to process your request.

Conditions:
-- Trap destinations are configured using the GUI: When trap destinations are configured in the GUI, the trap name is generated using the destination IP address.
-- Traps of the same destination address were previously created and deleted.

Impact:
GUI parameter checking does not work as expected. BIG-IP Administrator is unable to create a SNMP trap session.

Workaround:
To work around this issue when using the GUI, remove all traps that have the same destination address as the new one that failed. Then re-add your destination.

Tip: You can use tmsh to create/delete/modify SNMP traps, which enables viewing of the generated names, making it easier to understand what error has occurred.


691219-3 : Hardware syncookie mode is used when global auto last hop is disabled.

Links to More Info: BT691219

Component: TMOS

Symptoms:
When global auto last hop is disabled, for iSeries platforms (excluding i2xxx/i4xxx) and B4450 blades, hardware syncookie mode is used on SYN attack.

Conditions:
Global autohop is disabled. This setting is controlled by the following DB variable:

# tmsh list sys db connection.autolasthop
sys db connection.autolasthop {
    value "enable"
}

The default setting is enable.

Impact:
The virtual server can enter hardware syncookie mode, at which point responses will be routed using the incoming packet route. This can break configurations that are using asymmetric routing.

Workaround:
Disable hardware syncookies using the following DB variable:

# tmsh list sys db pvasyncookies.enabled
sys db pvasyncookies.enabled {
    value "true"
}

The default setting is true.


690928-6 : System posts error message: 01010054:3: tmrouted connection closed

Links to More Info: BT690928

Component: TMOS

Symptoms:
Beginning in BIG-IP 12.0.0, the tmrouted process pushes dynamic routes directly to the Traffic Management Microkernel (TMM). This message indicates the system is shutting down and is expected behavior during the reboot or shutdown process. The appearance of this message on a stable running system may indicate an issue with tmrouted functionality.

System posts the following message in /var/log/ltm: 01010054:3: tmrouted connection closed

Conditions:
This message occurs when all of the following conditions are met:

-- You have configured the BIG-IP system to use dynamic routing.
-- The BIG-IP system is in the process of shutting down or rebooting.

Impact:
This message is benign, unless you view the message on a stable running system. In this case, the message may indicate an issue with the tmrouted process.

Workaround:
None.


690781-4 : VIPRION systems with B2100 or B2150 blades cannot run certain combinations of vCMP guest sizes

Links to More Info: BT690781

Component: TMOS

Symptoms:
VIPRION systems equipped with B2100 or B2150 blades cannot run any more vCMP guests in addition to three 1-slot 8-core guests.

So if a system has four blades, any additional guests created on the remaining blade will not be operational.

Although the system allows all guests to be created and started, the ones deployed last will not work correctly.

Specifically, the guests deployed last will fail to access TMM networks.

Additionally, the vCMP host logs messages similar to the following example to the /var/log/ltm file:

-- info bcm56xxd[13741]: 012c0016:6: FP(unit 0) Error: Group (6) no room.
-- err bcm56xxd[13741]: 012c0011:3: entry create failed: SDK error No resources for operation bs_field.cpp(447)
-- err bcm56xxd[13741]: 012c0011:3: geteid_qualify_egress failed: SDK error No resources for operation bs_field.cpp(2009)
-- err bcm56xxd[13741]: 012c0011:3: program dest mod/port rule failed: SDK error No resources for operation bs_vtrunk.cpp(5353)
-- err bcm56xxd[13741]: 012c0011:3: vdag class L4 redirect failed: SDK error No resources for operation bs_vtrunk.cpp(3261)

Conditions:
This issue occurs when the following conditions are met:

-- A C2400 VIPRION chassis is equipped with four B2100 or B2150 blades.

-- A vCMP configuration consisting of at least three 1-slot 8-core guests was put in place (in other words, three full-blade guests).

-- One or more vCMP guests are created on the remaining VIPRION blade in the chassis.

Impact:
One or more guests do not function properly as they cannot access TMM networks. All traffic fails to pass.

Workaround:
This issue is caused by a hardware limitation on B2100 and B2150 blades preventing this specific vCMP configuration from instantiating correctly.

As a workaround, you must specify different vCMP guest sizes.

For instance, you could use the following configuration:

-- Four 2-slot 4-core vCMP guests instead of four 1-slot 8-core vCMP guests

Although not the same, both configurations yield the same total number of TMM instances per guest.


689147-6 : Confusing log messages on certain user/role/partition misconfiguration when using remote role groups

Links to More Info: BT689147

Component: TMOS

Symptoms:
When using remote role groups to set user/role/partition information, user login fails, but logs in /var/log/secure indicate that authentication was successful.

Errors similar to the following appear in /var/log/ltm:

-- User restriction error: The administrator, resource administrator, auditor and web application security administrator roles may not be restricted to a single partition.
-- Input error: invalid remote user credentials, partition does not exist, broken-partition

Errors similar to the following appear in /var/log/secure:

tac_authen_pap_read: invalid reply content, incorrect key?

Conditions:
Using remote role groups to set user/role/partition information for remote users, and either of the following:
-- A remote user is configured with the role of administrator, resource administrator, auditor, or web application security administrator, with access to a particular partition, rather than all. (These roles require access to all partitions.)
-- A remote user is configured with partition access set to a partition that does not exist on the BIG-IP system.

Impact:
The messages in /var/log/secure may be confusing and make it more difficult to diagnose the login failure.

Workaround:
Check /var/log/ltm for more specific error messages.


683534-2 : 'tmsh show sys connection' command prompt displaying 4 billion connections is misleading

Links to More Info: BT683534

Component: Local Traffic Manager

Symptoms:
The 'tmsh show sys connection' may present a prompt asking you to confirm you want to display ~4 billion (4,294,967,295) connections:

# show sys connection max-result-limit infinite

Really display 4294967295 connections? (y/n)

Conditions:
-- The 'tmsh show sys connection' command is executed with max-result-limit option set to infinite.

Impact:
The value shown in the prompt (4294967295) is misleading, and does not reflect the actual number of connections being handled by the system. The 4294967295 number represents the maximum value the field can hold, not the number of actual connections.

Workaround:
None


679316-8 : iQuery connections reset during SSL renegotiation

Links to More Info: BT679316

Component: Local Traffic Manager

Symptoms:
Error in /var/log/gtm:
err gtmd[14797]: 011ae0fa:3: iqmgmt_receive: SSL error: error:140940F5:SSL routines:SSL3_READ_BYTES:unexpected record

Conditions:
This occurs when a system tries to send data over the iQuery connection while the two endpoints are performing SSL renegotiation.

Note: iQuery connections automatically perform SSL renegotiation every 24 hours.

Impact:
The BIG-IP system is marked 'down' until the connection is reestablished. This usually takes no longer than one second.

Note: This is a subtly different issue from the one (with a very similar error, 140940F5 virtual server 140940E5) described in Bug ID 477240: iQuery connection resets every 24 hours :: https://cdn.f5.com/product/bugtracker/ID477240.html (K16185: BIG-IP GTM iQuery connections may be reset during SSL key renegotiation :: https://support.f5.com/csp/article/K16185).

This issue occurs even in versions where ID 477240 is fixed. There is no fix for this specific trigger of the same message.

Note: The iQuery communication issue is fixed through Bug ID 760471: GTM iQuery connections may be reset during SSL key renegotiation :: https://cdn.f5.com/product/bugtracker/ID760471.html.

Workaround:
There is no workaround at this time, but the problem is fixed via changes made in ID760471


674026-6 : iSeries AOM web UI update fails to complete.

Links to More Info: BT674026

Component: TMOS

Symptoms:
Upon upgrading a BIG-IP version, AOM web UI updates can sometimes fail.

Conditions:
This occurs when upgrading a BIG-IP system's software version on iSeries platforms.

Impact:
After booting to a new version, the AOM web UI update fails with an error message in /var/log/ltm similar to the following:

err bmcuiupdate[20824]: Failed updated AOM web UI with return code 2

Workaround:
At the bash prompt run:

/etc/lcdui/bmcuiupdate

This triggers another upgrade attempt, and the result is logged in /var/log/ltm. This should not be service-affecting.


673952-6 : 1NIC VE in high availability (HA) device-group shows 'Changes Pending' after reboot

Links to More Info: BT673952

Component: TMOS

Symptoms:
When Virtual Edition (VE) is configured for 1NIC, you will see the following logs on reboot indicating that configuration has been loaded from file:

 notice tmsh[12232]: 01420002:5: AUDIT - pid=12232 user=root folder=/Common module=(tmos)# status=[Command OK] cmd_data=load sys config partitions all base
 notice tmsh[12392]: 01420002:5: AUDIT - pid=12392 user=root folder=/Common module=(tmos)# status=[Command OK] cmd_data=load sys config partitions all

Conditions:
- VE configured in 1NIC mode.
- Unit booted either through reboot or power on.

Impact:
This is unlikely to have any impact if the VE is in standalone mode but could result in an unexpected config if the configuration files differ.

If the VE is part of a device-group, then this will result in a commit id update and the units will show 'Changes pending'.

Workaround:
None.


673573-8 : tmsh logs boost assertion when running child process and reaches idle-timeout

Component: TMOS

Symptoms:
An idle-timeout occurs while running a sub-process in interactive mode, resulting in a log message. tmsh logs a benign but ominous-looking critical error to the console and to /var/log/ltm if a tmsh command reaches idle timeout and a spawned sub-process is still running.

The errors in /var/log/ltm begin with the following text:
    'boost assertion failed'

Conditions:
-- tmsh command reaches idle timeout.
-- Spawned sub-process is still running.

Impact:
Although the wording indicates a failure, the message is benign and you can safely ignore it.

Workaround:
None.


663754-1 : Modifying the default management port can break internal functionality

Links to More Info: BT663754

Component: Device Management

Symptoms:
Modifying the default management port for httpd 443 (ssl-port) to anything else via tmsh, will break the below functionality :
1. Gossip Framework : REST high availability (HA) sync framework will not work.
2. Licensing via BIG-IQ
3. selfLinks will be wrong

Conditions:
Changing the default management port of BIG-IP for httpd from 443 to anything else.

Impact:
BIG-IP will be unable to provide below functionality :
1. Gossip Framework : REST high availability (HA) sync framework will not work.
2. Licensing via BIG-IQ
3. selfLinks will be wrong
4. iAppLx, SSL Orchestrator, Access Guided Configuration, AS3 will be affected as these modules depends on Gossip

Workaround:
NA


662301-8 : 'Unlicensed objects' error message appears despite there being no unlicensed config

Links to More Info: BT662301

Component: TMOS

Symptoms:
An error message appears in the GUI:
This device is not operational because the loaded configuration contained errors or unlicensed objects. Please adjust the configuration and/or the license, and re-license the device.

Examination of the configuration and license shows that there are no configuration errors or unlicensed configuration objects. The device is operational.

Conditions:
The BIG-IP system is licensed and the configuration loaded.

Impact:
Error message appears in the GUI stating that the device is not operational. However, the device is operational.

Workaround:
On an appliance, restart mcpd by running the following command:

    bigstart restart mcpd

On a VIPRION or vCMP guest running on a VIPRION, restart MCPD on all blades by running the following command:

    clsh bigstart restart mcpd

Note: This causes a system to go offline while services restart. Traffic disrupted while services restart.


659579-6 : Timestamps in icrd, restjavad, and restnoded logs are not synchronized with the system time

Links to More Info: BT659579

Component: TMOS

Symptoms:
Logs on icrd, restnoded, and restjavad are in the UTC time zone and are not aligned to the system time, which makes it difficult to determine the time during troubleshooting operations.

Conditions:
Checking the icrd, restnoded, and restjavad logs timestamps.

Impact:
Difficult to troubleshoot as the logs are not aligned with system time.

Workaround:
None


658943-5 : Errors when platform migration process is loading UCS using trunks on vCMP guest/F5OS Tenants

Links to More Info: BT658943

Component: TMOS

Symptoms:
During the platform migration from a physical BIG-IP system to a BIG-IP vCMP guest/F5OS Tenant, the load fails with one of the following messages:

01070687:3: Link Aggregation Control Protocol (LACP) is not supported on this platform. Unexpected Error: Loading configuration process failed.

01070338:3: Cannot create trunk [name of trunk], maximum limit reached Unexpected Error: Loading configuration process failed.

Conditions:
-- The source device is a physical BIG-IP device with one or more trunks with or without LACP in its configuration.
-- The destination device is a vCMP guest/F5OS Tenant.

Impact:
The platform migration fails and the configuration does not load.

Workaround:
You can use one of the following workarounds:

-- Remove all trunks from the source configuration prior to generation of the UCS.

-- Before loading the UCS archive onto the target BIG-IP, edit the archive and remove the trunk configuration from ./config/bigip_base.conf, and then repack the UCS.

-- After the UCS load fails, edit the configuration manually on the destination to remove trunk references, and then reload the configuration.

-- K50152613


658850-6 : Loading UCS with the platform-migrate parameter could unexpectedly set or unset management DHCP

Links to More Info: BT658850

Component: TMOS

Symptoms:
When you load a UCS file using the platform-migrate parameter, the mgmt-dhcp value (enabled, disabled, or unset) will overwrite the value on the destination. Depending on the effect, this could change the destination's management IP and default management route.

If the UCS does not have mgmt-dhcp explicitly written out, note that its value is treated as the default for the local system, which varies by the type of system. On Virtual Edition (VE) platforms, the default is to enable DHCP. On all other platforms, the default is to disable DHCP.

Conditions:
This occurs when loading a UCS using the platform-migrate parameter:
tmsh load sys ucs <ucs_file_from_another_system> platform-migrate

Impact:
Changing the mgmt-dhcp value on the destination can result in management changing from statically configured to DHCP or DHCP to statically configured. This can result in loss of management access to the device, requiring in-band or console access.

Workaround:
There are a few ways to avoid this issue:

1. Specify the "keep-current-management-ip" parameter to the "load sys ucs" command, for instance:

tmsh load sys ucs <ucs_file_from_another_system> platform-migrate keep-current-management-ip

Note: The "keep-current-management-ip" parameter is undocumented and will not appear in context help or tab completion.

2. If you want to reset the target device to use a static IP, run the following commands after loading the UCS with the platform-migrate command:

tmsh modify sys global-settings mgmt-dhcp disabled
tmsh create sys management-ip <ip>/<mask>
tmsh delete sys management-route default
tmsh create sys management-route default gateway <ip>


652877-7 : Reactivating the license on a VIPRION system may cause MCPD process restart on all secondary blades

Links to More Info: BT652877

Component: TMOS

Symptoms:
All services on one or all secondary blades in a VIPRION chassis restart, and MCPD logs errors similar to the following:

-- err mcpd[9063]: 01070734:3: Configuration error: DB validation exception, unique constraint violation on table (sflow_vlan_data_source) object ID (1168). A duplicate value was received for a non-primary key unique index field. DB exception text (Cannot update_indexes/checkpoint DB object, class:sflow_vlan_data_source status:13)
-- err mcpd[9063]: 01070734:3: Configuration error: Configuration from primary failed validation: 01070734:3:Configuration error: DB validation exception, unique constraint violation on table (sflow_vlan_data_source) object ID (1168). A duplicate value was received for a non-primary key unique index field. DB exception text (Cannot update_indexes/checkpoint DB object, class:sflow_vlan_data_source status:13)... failed validation with error 17237812.

In versions prior to v11.6.0, the error is: 'Can't save/checkpoint DB object,' rather than 'Can't update_indexes/checkpoint DB object'.

Conditions:
Multi-bladed VIPRION system, where the 'if-index' value for VLANs differs between blades.

You can check the 'if-index' value by running the following command on each blade: tmsh list net vlan all if-index.

Impact:
MCPD restart on all secondary blades results in partial service outage.

Workaround:
Reactivate the license only on a system that is standby/offline.


646768-6 : VCMP Guest CM device name not set to hostname when deployed

Links to More Info: K71255118, BT646768

Component: TMOS

Symptoms:
When you access the vCMP guest instance after you deploy the system, the instance uses the hostname bigip1.

Conditions:
This issue occurs when all of the following conditions are met:

-- The BIG-IP system is running v11.6.0 or earlier.
-- You configure a vCMP guest instance that is running BIG-IP v11.6.0 or later.
-- You have configured the vCMP guest instance with a hostname other than bigip1.
-- You deploy the vCMP guest instance.

Impact:
The vCMP guest does not use the configured hostname.

Workaround:
-- In tmsh, run the following commands, in sequence:

 mv cm device bigip1 HOSTNAME
 save sys config

-- Rename the device name in the GUI.


632553-6 : DHCP: OFFER packets from server are intermittently dropped

Links to More Info: K14947100, BT632553

Component: Local Traffic Manager

Symptoms:
With a DHCP relay virtual server, OFFER packets from DHCP server are intermittently not forwarded to the client and dropped on BIG-IP system.

Conditions:
It is not known exactly what triggers this condition, but it occurs intermittently when the DHCP relay virtual server is in use.

Impact:
Client machines joining the network do not receive DHCP OFFER messages.

Workaround:
Manually delete the serverside to force it to be recreated by the next DHCP request.

For example, if the flow to the DHCP server 10.0.66.222 is broken, issue the following tmsh command:

tmsh delete sys connection ss-server-addr 10.0.66.222 cs-server-port 67


612083-3 : The System Event Log may list correctable hardware, PCIe or DMI errors.

Links to More Info: BT612083

Component: TMOS

Symptoms:
One or more of the following messages appear in the system event log:

CPU0 HW Correctable Error
CPU 0 Corrected Error: Port 1a PCIe* logical port has detected an error.
CPU 0 PCI/DMI Error B:D:F 0x8: xpglberrsts: pcie_aer_correctable_error
CPU 0 PCI/DMI Error B:D:F 0x8: corerrsts: receiver_error_status
CPU 0 PCI/DMI Error B:D:F 0x8: rperrsts: correctable_error_received
CPU 0 PCI/DMI Error B:D:F 0x8: rperrsts: multiple_correctable_error_received
CPU 0 Corrected Error: DMI Error Status
CPU 0 PCI/DMI Error B:D:F 0x0: xpglberrsts: pcie_aer_correctable_error
CPU 0 PCI/DMI Error B:D:F 0x0: corerrsts: receiver_error_status
CPU 0 PCI/DMI Error B:D:F 0x0: rperrsts: correctable_error_received
CPU 0 PCI/DMI Error B:D:F 0x0: rperrsts: multiple_correctable_error_received

Conditions:
The error messages may appear following an AC power cycle of the BIG-IP iSeries platforms: i2000, i2800, i4000 and i11800.

Impact:
The system detected an error on an internal bus and was able to correct it. There is no data loss or functional impact.

Workaround:
None


605966-9 : BGP route-map changes may not immediately trigger route updates

Links to More Info: BT605966

Component: TMOS

Symptoms:
When a route-map is used to filter BGP advertisements, changes to the route-map that affect the filtered routes may not trigger an update to the affected routes.

Conditions:
BGP in use with a route-map filtering advertisements.

Impact:
BGP table may not reflect route-map changes until "clear ip bgp" is executed.

Workaround:
Run "clear ip bgp <neighbor>".


599135-4 : B2250 blades may suffer from high TMM CPU utilisation with tcpdump

Links to More Info: BT599135

Component: Local Traffic Manager

Symptoms:
B2250 blades may suffer from continuous TMM CPU utilization when tcpdump has been in use.

Conditions:
Run tcpdump on a B2250 platform

Impact:
Increment in TMM CPU utilization with every run of tcpdump.

Workaround:
Restart TMM, avoid the use of tcpdump.


574762-4 : Forwarding flows leak when a routing update changes the egress vlan

Links to More Info: BT574762

Component: Local Traffic Manager

Symptoms:
Forwarding flow doesn’t expire and leaks a connflow object.

Conditions:
Conditions to hit this are a route change on forwarded flows.

Impact:
Memory leak.

Workaround:
None


566995-2 : bgpd might crash in rare circumstances.

Links to More Info: BT566995

Component: TMOS

Symptoms:
Under unspecified conditions and in rare cases, bgpd might crash. Although bgpd restarts right away, routing table might be impacted.

Conditions:
The conditions under which this occurs are not known.

Impact:
This might impact routing table and reachability.

Workaround:
None known.


550526-3 : Some time zones prevent configuring trust with a peer device using the GUI.

Links to More Info: K84370515, BT550526

Component: TMOS

Symptoms:
AEST, AEDT, ACDT, ACWST, ACWDT, AWST, Asia/Muscat, and AWDT time zones prevent configuring trust with a peer device using the GUI.

Conditions:
-- Setting a BIG-IP system timezone to AEST, AEDT, ACDT, ACWST, ACWDT, AWST, Asia/Muscat, or AWDT.

-- Using the GUI to add a peer device to a trust configuration.

Impact:
Adding a peer device using the GUI fails.

Workaround:
You can use either of the following workarounds (you might find the first one easier):

-- Temporarily set the device timezone to a non-affected timezone (e.g.; UTC), establish trust, and set it back:

1. Navigate to System :: Platform.

2. Under 'Time Zone', select 'UTC', and click 'Update'

3. Repeat steps one and two to change all devices that are to be part of the trust domain.

4. Establish device trust by navigating to Device Management :: Device Trust :: Add all peers to be part of the trust domain.

5. Once trust is established, navigate to System :: Platform, and change Time Zone back to preferred time zone.

-- Use tmsh to add a peer device in these timezones: AEST, AEDT, ACDT, ACWST, ACWDT, AWST, Asia/Muscat, or AWDT.


547947-2 : Feeding empty username and password to the Logon Page followed by RadiusAuthAgent shows the session as Logged out

Links to More Info: BT547947

Component: Access Policy Manager

Symptoms:
Session logs out. No error messages or retry logon page.
---------------------------------------------

Your session is finished.

Logged out successfully.

Thank you for using BIG-IP.

To open a new session, please click here.
----------------------------------------------

Conditions:
Your environment has an access policy like the following

                                   Success
Start -> Logon Page -> Radius Auth ----> Advanced resource assign (webtop) -> allow.
                              |
                              | failure
                              -----------------------------------------------> Deny.

If you connect to the virtual server with this access policy and provide an empty username and password, you are logged out of the session and asked to open a new session page.

Impact:
Without providing proper username and password, user is shown the error "Logged out successfully.", which is improper.

Workaround:
No mitigation observed.


539648-4 : Disabled db var Watchdog.State prevents vCMP guest activation.

Links to More Info: K45138318, BT539648

Component: TMOS

Symptoms:
If a vCMP guest user disables the watchdog using the db variable Watchdog.State, then the vCMP guest does not reach a running state as reported by the vCMP host.

Conditions:
This occurs when the user sets sys db Watchdog.State value disable.

Impact:
vCMP guest fails to be operational.

Workaround:
Do not change the Watchdog.State db variable. The vCMP host requires the watchdog to monitor the guest health.


528314-2 : Generating new default certificate and key pairs for BIG-IP ssl profiles via CLI will not be reflected in GUI or in tmsh

Links to More Info: K16816, BT528314

Component: TMOS

Symptoms:
Using CLI to generate new default certificate and key pairs for BIG-IP ssl profiles are not reflected in GUI or in tmsh.

Conditions:
Using OpenSSL commands to generate a new default certificate and key pair, as described in SOL13579: Generating new default certificate and key pairs for BIG-IP ssl profiles, available here: https://support.f5.com/kb/en-us/solutions/public/13000/500/sol13579.html.

Impact:
After the renewal, tmsh list sys file ssl-cert default.crt command or the general properties in the GUI SSL Cert List shows the old one. This is a cosmetic issue only. The system uses the new default.

Workaround:
Perform a force reload of mcpd by running the following commands: -- touch /service/mcpd/forceload. -- tmsh restart sys service mcpd.


527119-9 : An iframe document body might be null after iframe creation in rewritten document.

Links to More Info: BT527119

Component: Access Policy Manager

Symptoms:
Cannot use certain page elements (such as the Portal Access menu) in Google Chrome, and it appears that JavaScript has not properly initialized, and results in JavaScript errors on the following kinds of code:
    iframe.contentDocument.write(html)
    iframe.contentDocument.close()
    <any operation with iframe.contentDocument.body>

Conditions:
-- The body of a dynamically created iframe document might be initialized asynchronously after APM rewriting.

-- Using the Chrome browser.

Impact:
Some JavaScript applications might not work correctly when accessed through Portal Access. For example, one of applications known to contain such code and fail after APM rewriting is TinyMCE editor.

Workaround:
Revert rewriting of the document.write call with a post-processing iRule.

The workaround iRule will be unique for each affected application.


499348-14 : System statistics may fail to update, or report negative deltas due to delayed stats merging.

Links to More Info: BT499348

Component: TMOS

Symptoms:
Under some conditions, the BIG-IP system might fail to report statistics over time. This can manifest as statistics reporting unchanging statistics (e.g., all zeroes (0)), or as sudden spikes in traffic, or as negative deltas in some counters.

The system performance graphs will also appear to have gaps / be missing data at the times that this occurs.

Conditions:
This occurs when there are frequent changes occurring to the underlying statistics data structures. This might occur under the following conditions:

-- The system is spawning/reaping processes on a frequent basis (e.g., when there is a large number of external monitors).

-- iRules are frequently using 'SSL::profile' to select different SSL profiles on a virtual server (this can cause per-virtual server, per-profile statistics to be created and deleted on a regular basis).

Impact:
Statistics fail to merge, which results in incorrect view of system behavior and operation.

Workaround:
This issue has two workarounds:

1. Reduce the frequency of changes in the statistics data structures. The specific action to take depends on what is triggering them. To do so, use any or all of the following:

 -- Reduce the frequency of configuration changes.
 -- Reduce the use of 'SSL::profile' in iRules.
 -- Reduce the number/frequency of processes being spawned by the system.

2. The second workaround has two parts:

a) Switch statistics roll-ups to the 'slow_merge' method, which causes the system to spend more CPU merging statistics. To do so, set the 'merged.method' DB key to 'slow_merge' using the following command:

    tmsh modify sys db merged.method value slow_merge

b) Change the merge-interval value to 2 to reduce CPU usage when merge-method is slow-merge.

    tmsh modify /sys db merged.merge.interval {value "2"}

Note: Performing the second workaround has the side-effect of disabling tmstat snapshots on the device. The tmstat snapshots are intended for F5-internal use only: the lack of snapshots will have no bearing on the functionality of your system; however, F5 Support might be impacted in their ability to troubleshoot issues on your system.


493740-4 : tmsh allows cipher group creation with non-existent "require" or "exclude" cipher rule.

Links to More Info: BT493740

Component: TMOS

Symptoms:
Using tmsh it is possible to create a cipher group referencing a non-existent cipher rule with tmsh even if this configuration is invalid.

Conditions:
Use tmsh to create a cipher group referencing a non-existent cipher rule using a command like this, where the 'require' or the 'exclude' directive comes after the 'allow' directive.

The non-existent cipher rule is "no-exist" in these examples:

tmsh create ltm cipher group test-group { allow add { f5-default } require add { no-exist } }

tmsh create ltm cipher group test-group { allow add { f5-default } exclude add { no-exist } }

Impact:
The result is an invalid configuration that can break configuration synchronisation between BIG-IP peers in some cases (after upgrades, or full configuration reload, for example).

Also, when navigating to the cipher group the GUI does not show it.

The GUI may also show this error:
"An error has occurred while trying to process your request. "

Workaround:
Use the GUI to create a new cipher groups.

When using tmsh, don't create a cipher group referencing a non-existent cipher rule.


475997-2 : SSL stream throughput slows down when hardware SSL offloading is in use

Links to More Info: K16687, BT475997

Component: Performance

Symptoms:
When performing LAN-speed transfers of large files (hundreds of MB) over SSL, or transfers of small ssl records, the throughput speed of the transfer significantly drops if the hardware SSL offloading is performed. The performance drop is from ~30% - ~50% depending on the cipher suite used.

Conditions:
This issue occurs when hardware SSL offloading is turned on.

Impact:
The performance degrades from ~30% - ~50% depending on the cipher suite used.

Workaround:
To work around this issue, you can modify the High-Speed Bridge (HSB) scheduler. To do so, perform the following procedure:

Impact of workaround: Performing the following procedure should not have a negative impact on your system.

Modifying the scheduler.hsbpollmode.ltm db key

Log in to the Traffic Management Shell (tmsh) by typing the following command:
tmsh

To set the db key value to always, type the following command:
modify /sys db scheduler.hsbpollmode.ltm value always

Save the changes by typing the following command:
save /sys config


464708-3 : DNS logging does not support Splunk format log

Links to More Info: BT464708

Component: Global Traffic Manager (DNS)

Symptoms:
DNS logging does not support Splunk format logging. It fails to log the events, instead logging err messages:

hostname="XXXXXXXXXXXXX.XX",errdefs_msgno="01230140:3:

Conditions:
DNS logging configured for Splunk format.

Impact:
DNS logging does not log Splunk format to HSL.

Workaround:
Use an iRule to send Splunk-formatted messages to the Splunk server.

For example:

ltm rule dns_logging_to_splunk {

   when DNS_REQUEST {
      set ldns [IP::client_addr]
      set vs_name [virtual name]
      set q_name [DNS::question name]
      set q_type [DNS::question type]

      set hsl [HSL::open -proto UDP -pool splunk-servers]
      HSL::send $hsl "<190>,f5-dns-event=DNS_REQUEST,ldns=$ldns,virtual=$vs_name,query_name=$q_name,query_type=$q_type"
   }

   when DNS_RESPONSE {
      set ldns [IP::client_addr]
      set vs_name [virtual name]
      set q_name [DNS::question name]
      set q_type [DNS::question type]
      set answer [DNS::answer]

      set hsl [HSL::open -proto UDP -pool splunk-servers]
      HSL::send $hsl "<190>,f5-dns-event=DNS_RESPONSE,ldns=$ldns,virtual=$vs_name,query_name=$q_name,query_type=$q_type,answer=\"$answer\""
   }
}


447522-1 : GUI: SNMPV3 Incorrectly requires "OID" when creating an SNMP user.

Links to More Info: BT447522

Component: TMOS

Symptoms:
The BIG-IP GUI incorrectly requires an OID to be specified when creating an SNMPv3 user.

Conditions:
Creating an SNMPv3 user via the BIG-IP GUI.

Impact:
An OID can be used to restrict the view that the user has to a particular branch of the tree, but should not be a required attribute.

Workaround:
- Enter a value of ".1" (with a leading dot) to allow access to all OIDs
(or)
- Create the user using tmsh instead of the GUI, where the oid-subset attribute is not mandatory.


431503-11 : TMSH crashes in rare initial tunnel configurations

Links to More Info: K14838, BT431503

Component: TMOS

Symptoms:
In rare BIG-IP configuration scenarios, TMM may crash during its startup process when the tunnel configurations are loaded.

Conditions:
During TMM startup, a tunnel is created, then immediately removed during the configuration load period, when TMM neighbor messages may be in flight via the tunnel. When the race condition fits, the neighbor message may land on an invalid tunnel.

Impact:
TMM crash in rare race conditions.

Workaround:
None.


427094-1 : Accept-language is not respected if there is no session context for page requested.

Links to More Info: BT427094

Component: Access Policy Manager

Symptoms:
Localization settings are determined when the session is created.
As a result, when the user logs out, there is user context left for APM to determine what language to present to the user.
So, when user is using the localized logon page, after the refresh it turns to the default language.

Conditions:
After configuring the preferred language, When refreshing login page twice, language is changed to default Eng.

Impact:
APM page doesn't load the preferred language after refreshing twice.

Workaround:
N/A


382363-8 : min-up-members and using gateway-failsafe-device on the same pool.

Links to More Info: K30588577

Component: TMOS

Symptoms:
The system does not require setting a pool's min-up-members greater than 0 (zero) when also using gateway-failsafe-device on the same pool.

Conditions:
A pool's min-up-members is 0 when gateway-failsafe-device is set.

Impact:
Failure to set min-up-members greater than 0 when using gateway-failsafe-device might cause errors. The tmm might crash.

Workaround:
Set min-up-members greater than 0 when using gateway-failsafe-device.


369640-8 : iRules might return incorrect data when multiple partitions and/or folders contain objects with the same name

Links to More Info: K17195

Component: Local Traffic Manager

Symptoms:
iRules might return incorrect data when the BIG-IP configuration has folders or multiple administrative partitions that contain objects with the same name.

As a result of this issue, you may encounter one or more of the following symptoms:

 -- Client connections receive incorrect data.
 -- The BIG-IP system incorrectly load balances client connections.

Conditions:
This issue occurs when all of the following conditions are met:

 -- The configuration includes objects of the same name in different folders or administrative partitions
 -- An iRule references the object without using the fully-qualified path, e.g. "pool example_pool" instead of "pool /Common/folder1/example_pool"

Impact:
Client connections receive incorrect data, or are load balanced incorrectly.

Workaround:
To work around this issue, always specify full paths to objects referenced in iRules, e.g. instead of:
    pool example_pool
use:
    pool /Common/example_pool


349706-4 : NetworkAccess assigns 1.1.1.1 address to remote ppp endpoint APM VPN

Component: Access Policy Manager

Symptoms:
Network access sends 1.1.1.1 as X-VPN-serer-IP and Edge client reserves this IP for PPP communication with APM server.

Conditions:
-- VPN is configured on BIG-IP.
-- Edge Client/webtop is used to connect to VPN.

Impact:
If VPN is connected:
1. The user may not access the 1.1.1.1 address from the client machine.
2. if 1.1.1.1 is used as a dns server ip in Network Access configuration, DNS resolution may fail on the client machine.

Workaround:
NA


342319-1 : BIND forwarder server list and the recursion and forward options.

Component: TMOS

Symptoms:
When you add a Domain Name System (DNS) server to the BIND forwarder server list from the Configuration utility, the recursion option is set to no and the forward option is not set.

Conditions:
The parameters 'recursion yes' and 'forward only' are not being updated in named.conf when creating entries in the BIND Forwarder Server List from the GUI.

Impact:
This issue may cause some DNS queries that are sent to the BIG-IP system to fail.

Workaround:
You can work around this issue by setting the recursion and forward options. For more information, see SOL12224: Configuring the BIND forwarder server list does not correctly set additional options for the named.conf file, available here: http://support.f5.com/kb/en-us/solutions/public/12000/200/sol12224.html.


222220-8 : Distributed application statistics are not passed correctly.

Links to More Info: K11931

Component: Global Traffic Manager (DNS)

Symptoms:
Distributed application statistics include only requests passed to its first wide IP.

For BIG-IP versions 12.0.0 and later, distributed application statistics are always zero.

Conditions:
Viewing distributed application statistics on configurations with multiple wide-IP members.

Impact:
The system does not pass statistics for requests to all wide-IP members in the distributed application.

Note: For BIG-IP versions 12.0.0 and later, the system does not pass statistics for requests to any wide-IP-members in the distributed application.

Workaround:
None


1216573 : AFM Learning Domain issue when trying with many valid domains

Links to More Info: BT1216573

Component: Advanced Firewall Manager

Symptoms:
Trying with too many valid domains and not all these domains have entries created in the NXDOMAIN table when they are trying to do learning.

Conditions:
The NXDOMAIN vector is enabled be it at the device level, VS level, or at both levels.

Impact:
We will not be able to honor the legitimate DNS A query when we have an NXDOMAIN attack detected.

Workaround:
None


1216297-1 : TMM core occurs when using disabling ASM of request_send event

Links to More Info: BT1216297

Component: Application Security Manager

Symptoms:
When adding an iRule to disable ASM on request_send event, the TMM core occurs.

Conditions:
ASM is provisioned and attached to policy.
Add iRule that disables ASM and HTTP on HTTP_REQUEST_SEND event.

Impact:
TMM cores, system is down.

Workaround:
Remove the iRule, or disable ASM for all events of the URL.


1216053-4 : Regular monitors do not use options from SSL profiles

Links to More Info: BT1216053

Component: Local Traffic Manager

Symptoms:
The HTTPS monitors do not use the options from the SSL profile it is set with.

Conditions:
The HTTPS monitor(s) are set with an SSL profile with Non-default options set.

Impact:
Pool members may be incorrectly marked up or down as the incorrect SSL options are used.


1215401-1 : Under Shared Objects, some country names are not available to select in the Address List

Component: Advanced Firewall Manager

Symptoms:
Users can create a shared object list to define countries to block traffic from. On searching a name, a list will be shown from which the user can choose and add it to the address list.

There is a limit of only 8 entries in the drop-down menu to choose from.

Some countries are not shown in this list due to the ordering of entries returned from the database.

Conditions:
DOS is enabled

Impact:
As some countries are not available to select, they cannot be included in the Address List to block traffic.

Workaround:
Instead of the country (which is not available to select), all the regions within the country can be added to the block list. This is very cumbersome and error-prone as the list of regions should be known that are configurable in BIG IP.


1215165-1 : Support added for Microsoft Azure Managed HSM

Links to More Info: BT1215165

Component: Local Traffic Manager

Symptoms:
Azure Managed HSM integration with BIG-IP is now supported.

Conditions:
Using an Azure Managed HSM as HSM client with BIG-IP.

Impact:
Azure Managed HSM integration with BIG-IP is now supported.


1213277 : Certificate order manager configuration using DigiCert URL fails in the BIG-IP

Links to More Info: BT1213277

Component: TMOS

Symptoms:
When the certificate order manager is configured using DigiCert's URL we see failure with the below error log:

 DigiCert request-type:(4) URL:https://www.digicert.com/services/v2/order/certificate/1

Conditions:
Configuring DigiCert certificate order manager in the BIG-IP.

Impact:
DigiCert certificates can not be downloaded.


1212081-2 : The zxfrd segfault and restart loop due to incorrect packet processing

Links to More Info: BT1212081

Component: Global Traffic Manager (DNS)

Symptoms:
The zxfrd is in restart loop and cores.

Conditions:
During the no transfer of zone, the zxfrd is cored when performing the packet processing.

Impact:
DNS express does not work properly.

Workaround:
None


1211905-2 : Error occurs when importing ASM Policy in XML format with element "violation_ratings_counts"

Links to More Info: BT1211905

Component: Application Security Manager

Symptoms:
Unable to import the XML format policy.

Conditions:
Having an XML policy with violation_rating_counts elements.

Impact:
Unable to import XML policy.

Workaround:
1) Remove the elements from an exported policy file.

sed -i '/<violation_rating_counts\/>/d' *xml

2) Import the policy again.


1211817 : AVRD may crash while modifying the global settings

Links to More Info: BT1211817

Component: Application Visibility and Reporting

Symptoms:
There are two different threads closing the same socket simultaneously.

Conditions:
During the modification of global settings from internal to external.

Impact:
AVRD core generated.

Workaround:
None


1211437-2 : When mobile cookie is too long, Anti-Bot SDK is failing

Component: Application Security Manager

Symptoms:
When mobile (TS_72) cookie is longer then 511, it get truncated by BIG-IP and cannot be parsed.

Conditions:
- Bot Defense profile is attached to virtual server, with Mobile SDK enabled.
- Application name is long (causing the cookie to be long).

Impact:
Anti-Bot SDK is failing, clients cannot be handled as mobiles.

Workaround:
None


1211369-1 : [Validation] Do not allow AD/LDAP object pointing to the same IP:PORT

Links to More Info: BT1211369

Component: Access Policy Manager

Symptoms:
TMM core

Conditions:
AD and LDAP objects point to the same IP:PORT.

Impact:
Traffic disruption

Workaround:
Use unique names for AD and LDAP objects and those objects should not point to the same IP:PORT.


1211361-1 : Validate AD/LDAP object names

Links to More Info: BT1211361

Component: Access Policy Manager

Symptoms:
TMM core

Conditions:
AD and LDAP objects have the same names.

Impact:
Traffic disruption

Workaround:
Use unique names for AD and LDAP objects and those objects should not point to the same IP:port.


1211341-4 : Failed to delete custom monitor after dissociating from virtual server

Component: Global Traffic Manager (DNS)

Symptoms:
When dissociated from virtual server, unable to delete custom monitor.

Conditions:
- Dissociate the custom monitor from virtual server
- Delete the custom monitor

Impact:
Unable to delete custom monitor.

Workaround:
None


1211297-3 : Handling DoS profiles created dynamically using iRule and L7Policy

Component: Anomaly Detection Services

Symptoms:
Persistant connections with HTTP requests that may switch according to dynamic change of DoS policy (using iRule or L7Policy) can cause a TMM crash.

Conditions:
A request arrives to BIG-IP and is waiting to be served (it is delayed using iRule), however, if the DoS profile is unbound during that time from the virtual server and a dynamic DoS profile change decision is made, it could potentially cause the request to be incorrectly associated with a context that has already been freed.

Impact:
In few scenarios, when DoS policy is changed during connection lifetime, TMM might crash.

Workaround:
None


1211189-3 : Stale connections observed and handshake failures observed with errors

Links to More Info: BT1211189

Component: Local Traffic Manager

Symptoms:
SSL handshake fails.
Invalid or expired certificates are being used in the handshake.

Conditions:
- When the certificates in BIG-IP are expired and being renewed remotely.
- When the clientssl or serverssl profiles are dynamically being attached to a virtual server through iRule.

Impact:
SSL handshake fails.
Vitual server (SSL Profiles) use old or expired certificates.

Workaround:
Restart the TMM or BIG-IP to resolve the issue temporarily (until next expiry time of the certificates).


1211089-3 : Traffic to IPv6 all nodes address not received by TMM on VE with ixlv driver

Links to More Info: BT1211089

Component: TMOS

Symptoms:
Traffic sent to the IPv6 all nodes multicast address is not seen by TMM.

Conditions:
A virtual environment utilizing TMM's ixlv driver.
Traffic is sent to the IPv6 all nodes multicast address.

Impact:
TMM fails to receive and process traffic to the IPv6 all nodes multicast address.

Workaround:
None


1211021-4 : Enforcement does not happen for entries in new and modified IPI feed lists due to lock issues

Component: Advanced Firewall Manager

Symptoms:
Entries added or updated in IP Intelligence (IPI) feed lists are not enforced. This occurs when threads in Dynamic White or Black Daemon (DWBLD) module are in deadlock.

Conditions:
- IPI license is enabled.
- Feed lists and policies are configured.

Impact:
Enforcement of entries in new and updated IPI feed lists does not happen.

Workaround:
Run the command "bigstart restart dwbld" to resolve the issue.

Check for "Empty items" message in /var/log/dwbld.log. If same message is seen for more than 100 times continuously, threads are in lock state and we can recover by restarting DWBLD module.


1210569-3 : User defined signature rule disappears when using high ASCII in rule

Links to More Info: BT1210569

Component: Application Security Manager

Symptoms:
WebUI display is empty.

Conditions:
When the configured rule has high ASCII (greater than 127) value.

Impact:
Unable to see the rule in webUI.

Workaround:
Use the following steps:

1. Navigate to Security > Options > Application Security > Attack Signatures.

2. Create a new signature in Advanced Edit Mode. After setting, confirm the setting value with the developer tool.

3. Add it to the signature set (backed by actual signature detection confirmation).

4. Remove the old signatures from signature set.


1210469-3 : TMM can crash when processing AXFR query for DNSX zone

Links to More Info: BT1210469

Component: Local Traffic Manager

Symptoms:
TMM crash with SIGABRT and multiple log messages with "Clock advanced by" messages.

Conditions:
Client querying AXFR to a virtual server or wideip listener that has DNSX enabled in the DNS profile and has a large amount of DNSX zones with a large amount of resource records.

Impact:
TMM cores and runs slow with "Clock advanced by" messages.

Workaround:
Disable zone transfer for the DNS profile associated with the virtual server.


1210053-1 : The cred_stuffing_fail_open Internal Parameter does not cause Leaked Credential violation in case of expiration or error

Links to More Info: BT1210053

Component: Application Security Manager

Symptoms:
In case of Leaked Credential server error, there is an internal parameter to raise Leaked Credentials Violation:
cred_stuffing_fail_open (default value is not to raise violation)
Changing the internal parameter value does not trigger the violation.

Conditions:
- ASM is provisioned.
- WAF Policy is attached to virtual server with Credential Stuffing enabled.
- Internal Parameter cred_stuffing_fail_open is set to 0.
- A server error (or timeout) occurred during leaked credential check.

Impact:
Leaked Credential violation is not raised.

Workaround:
None


1210025-1 : Address list discovery task does not trigger apply access policy automatically

Links to More Info: BT1210025

Component: Access Policy Manager

Symptoms:
After discovery task, the Access Policy is not saved automatically.

Conditions:
Dynamic Address Spaces configuration.

Impact:
Unable to use Dynamic Address Spaces.

Workaround:
None


1209709-4 : Memory leak in icrd_child when license is applied through BIG-IQ

Links to More Info: BT1209709

Component: TMOS

Symptoms:
The memory use for icrd_child may slowly increase, eventually leading to an OOM condition.

Conditions:
License applied through BIG-IQ.

Impact:
Higher than normal control-plane memory usage, possible OOM related crash.

Workaround:
Periodically kill the icrd_child processes. The restjavad will restart them automatically.


1209589-4 : BFD multihop does not work with ECMP routes

Links to More Info: BT1209589

Component: TMOS

Symptoms:
BFD multihop does not work with ECMP routes. TMMs are unable to agree on session ownership and dropping the session after 30 seconds.

Conditions:
On a multi-TMM box, configure BFD multihop peer reachable over ECMP route.

Impact:
BFD multihop does not work with ECMP routes and BFD session is getting dropped every 30 seconds.

Workaround:
None


1209465 : When vCMP host is rebooted, oldEngineID is not restored on guest

Links to More Info: BT1209465

Component: TMOS

Symptoms:
The oldEngineID is not restored on guest.

Conditions:
- vCMP host rebooted

Impact:
The snmpget and snmpwalk commands are not working.

Workaround:
Use the following steps:
1) Restart the SNMPD to regenerate engine ID.
2) Reboot the vCMP guest after the unclean shutdown recreates both usmUser and engine ID.
3) Recreate the SNMPv3 user from CLI to resolve the usmUser issue.


1209409-3 : Address lists with thousands of addresses can cause MCPD to become unresponsive and use 100% CPU

Links to More Info: BT1209409

Component: Advanced Firewall Manager

Symptoms:
If there are thousands of addresses in an address list, validation of the addresses can take extended time. While MCPD is validating the addresses it will use nearly 100% of the CPU. Also, during this time, other daemon might timeout their connection with MCPD and/or restart.

Conditions:
- Thousands of addresses in an address list.

Impact:
- Longer load /sys configuration time including on upgrade.

- Longer configuration sync time, where full configuration sync is more prone to cause this issue.

- Modifications using the webUI consume longer time and might timeout.

Depending on how long MCPD spends validating the addresses, other daemons, including TMM, might timeout their connection to MCPD and/or restart.

Workaround:
None


1208949-1 : TMM cored with SIGSEGV at 'vpn_idle_timer_callback'

Links to More Info: BT1208949

Component: Access Policy Manager

Symptoms:
TMM cores.

Conditions:
Network Access is in use.

Impact:
Traffic disrupted while TMM restarts.

Workaround:
None


1207381-3 : PEM policy: configuration update of a rule flow filter with 'source port' or 'destination port' of '0' (ANY) is ignored

Links to More Info: BT1207381

Component: Policy Enforcement Manager

Symptoms:
From the following example, a PEM policy rule flow filter
 matches the traffic from any source address and any port, to any destination address and port 81 (the port number is an example):

Source Address    Source Port     VLAN     Destination Address      Destination Port
0.0.0.0/0         0               ANY      0.0.0.0/0                81

When the rule is updated through the GUI or CLI to match traffic from any source address and any port, to any destination address and any port:

Source Address    Source Port     VLAN     Destination Address      Destination Port
0.0.0.0/0         0               ANY      0.0.0.0/0                0

The updated rule is correctly saved into the configuration as shown by the GUI and the CLI, but the new flow filter does not filter the traffic as expected.

The actual flow filter being applied is still the one from the previous version of the policy rule (destination port 81 in the example).

Conditions:
An existing PEM policy rule flow filter that is updated through GUI or CLI selecting Source Port '0' ('any') and/or destination port '0' ('any').

Impact:
The updated flow filter does not filter the traffic as expected.
The actual flow filter being applied is still the one from the previous version of the policy rule.

Workaround:
- Restart TMM to make the updated flow filter effective.

or

- Remove the flow filter altogether instead of replacing it with a filter like '0.0.0.0/0:0 --> 0.0.0.0/0:0' .
The intended result is the same: the rule will catch all traffic.

or

- Create a new additional rule with port number 0 and place in higher precedence (under the same policy).
    - For example, rule with precedence 10 allow flow for port 80 (instead of modifying this rule) and
    - Create a new rule with precedence 9 to allow flow for port "0" and delete the old rule.


1205509-2 : Region cache fails to update appropriately after referenced region update

Links to More Info: BT1205509

Component: Global Traffic Manager (DNS)

Symptoms:
GSLB region object containing records which reference other GSLB regions fail to update its cache when the regions referenced by its records are updated.

Conditions:
- GSLB region object containing records which reference other GSLB regions.
- Region cache was not updated correctly after referenced region updates.

Impact:
DNS query resolution fails to return correct results.

Workaround:
Instead of creating two regions for "not regions", use one region and create following topology record:

gtm topology ldns: not region /Common/_usr_gslbRegion_internalNet server: pool /Common/_usr_gslbPool_alpha {
   order 2
}

gtm topology ldns: not region /Common/_usr_gslbRegion_internalNet server: pool /Common/_usr_gslbPool_bravo {
   order 1
...
}


1205501-2 : The iRule command SSL::profile can select server SSL profile with outdated configuration

Links to More Info: BT1205501

Component: Local Traffic Manager

Symptoms:
Under few circumstances, an iRule selected server SSL profile can send previously configured certificate to the peer.

Conditions:
The iRule command SSL::profile is used to select a profile that is not attached to the virtual server, and changes have been made to the profile.

Impact:
The TLS handshake may use an outdated certificate that does not match the current configuration, potentially leading to handshake failures.

Workaround:
Terminate all traffic running on the virtual servers that are using the iRule command for the update to take effect.

or

Do not make changes to a profile that is actively being used by the iRule command.


1205061-2 : DNSSEC keys removed from the configuration before expiration date when iQuery connection goes down

Links to More Info: BT1205061

Component: Global Traffic Manager (DNS)

Symptoms:
DNSSEC keys removed from the configuration before expiration date.

Conditions:
On a GTM sync group, if the iQuery connection goes down, the DNSSEC keys are removed from the configuration before expiration date on DNS device with gtm.peerinfolocalid greater than zero.

Impact:
Removing KSK from the configuration before the expiration date can cause the outage if the user has not updated DS record.

Workaround:
None


1205045-4 : WMI monitor does not put pool members into an offline/unchecked state when BIG-IP receives HTTP responses other than 200

Links to More Info: BT1205045

Component: Local Traffic Manager

Symptoms:
With no credentials, WMI monitor status still displays "UP".

Conditions:
With no credentials or stale/expired credentials, the WMI monitor stats displays "UP".

Impact:
The user is misinformed about the status of the WMI monitor.

Workaround:
None


1205029 : WEBSSO with an OAuth Bearer token and the Cache option enabled cached tokens from a diff per-session context are flowed to the backend application

Links to More Info: BT1205029

Component: Access Policy Manager

Symptoms:
In some cases of WEBSSO same token is sent to different sessions in the backend.

Conditions:
WEBSSO with an OAuth Bearer token and the Cache option enabled cached tokens from a diff per-session context are flowed to the backend application

Impact:
Situations where JWTs (via WEBSSO / OAuth Bearer profile) are being sent downstream for requests which belong to a different user. The problem seems to be related to when these requests share the same client IP address. This is a big problem when clients are using NAT themselves to mask different users/sessions behind the same IP address.


1200929-2 : GTM configuration objects larger than 16384 bytes can cause the GTM sync process to hang

Links to More Info: BT1200929

Component: Global Traffic Manager (DNS)

Symptoms:
If GTM objects larger than 16384 bytes are created, then the GTM sync process will not complete. In addition, the gtm_add process (which requests a GTM sync for all objects) will not complete.

Following is the symptom for gtm_add:
After "Retrieving remote GTM configuration...", the process will pause for 300 seconds (5 minutes), and then exit, with a message "Syncer failed to retrieve configuration".

For a normal GTM sync, where gtm_add is not being used, the symptom is that the synchronisation of configuration changes is not working.

Conditions:
The presence of any MCPD object in the GTM configuration (/config/bigip_gtm.conf) which is larger than 16384 bytes, for example a large GTM rule.

Note: The GTM iRules are distinct from LTM iRules. Only GTM objects, such as GTM rules (applied to wideIPs) are relevant to this issue.

Impact:
Unable to complete GTM sync, unable to add a new GTM into the sync group.

Workaround:
Reduce the size of the problematic object to lower than 16384 bytes. For example, if the issue is with a GTM iRule, then try removing comments, blank lines, or unnecessary log statements that do not affect the functionality of the rule.


1199025-2 : DNS vectors auto-threshold events are not seen in webUI

Links to More Info: BT1199025

Component: Advanced Firewall Manager

Symptoms:
No option to see DNS auto-threshold event logs from webUI.

Conditions:
- DNS profile configured with fully automatic mode.

Impact:
DNS auto-threshold event logs are not visible from webUI.

Workaround:
None


1196537-1 : BD process crashes when you use SMTP security profile

Links to More Info: BT1196537

Component: Application Security Manager

Symptoms:
The BD process may crash when an SMTP security profile is attached to a virtual server, and the SMTP request is sent to the same virtual server.

Conditions:
- SMTP security profile is attached to VS
- SMTP request is sent to VS

Impact:
Intermittent BD crash

Workaround:
N/A


1196477-3 : Request timeout in restnoded

Links to More Info: BT1196477

Component: Device Management

Symptoms:
The below exception can be observed in restnoded log

Request timeout., stack=Error: [RestOperationNetworkHandler] request timeout.
At ClientRequest. <anonymous> (/usr/share/rest/node/src/infrastructure/restOperationNetworkHandler.js:195:19)

Conditions:
When BIG-IP is loaded with a heavy configuration.

Impact:
SSL Orchestrator deployment will not be successful.

Workaround:
1. mount -o remount,rw /usr
2. In getDefaultTimeout : function() at /usr/share/rest/node/src/infrastructure/restHelper.js

replace 60000 with required required timeout.
3. bigstart restart restnoded
4. mount -o remount /usr


1196401-2 : Restarting TMM does not restart APM Daemon

Component: Access Policy Manager

Symptoms:
Due to asynchronous nature of TMM threads and APM plugin channel threads, a core can trigger when TMM exited and APM Daemon (APMD) is still available with earlier TMM plugin handlers.

Conditions:
When TMM restarts and APM still has old TMPLUGIN handle (which will become invalid eventually).

Impact:
Might observe APMD core.

Workaround:
Restart APM, when TMM is restarted.


1196053-3 : The autodosd log file is not truncating when it rotates

Links to More Info: BT1196053

Component: Advanced Firewall Manager

Symptoms:
The autodosd file size increasing continuously irrespective of log rotation occurring every hour.

Conditions:
- DOS profiles (at Device/VS) configured with fully automatic, autodosd daemon will calculate the thresholds periodically and updates the log file with relevant logs.

Impact:
Logs are not truncated as expected. The autodosd log file size continue to increase even though it is rotated every hour.

Workaround:
Restarting autodosd daemon will truncate the log file content to zero.


1195385 : OAuth Scope Internal Validation fails upon multiple providers with same type

Links to More Info: BT1195385

Component: Access Policy Manager

Symptoms:
The Claim Validation in OAuth Scope Fails when two Azure providers with different tenant ID are provided in the JWT provider list such that, the non-expected provider comes first and expected one comes later. Once failure is logged OAuth flow is redirected to Deny Page.

Conditions:
When the list of providers are sent to TMM for Signature Validation the invalid provider is sent back as response indicating that it has passed the signature validation for the access_token that has been acquired in previous steps.

There are chances where Azure as AS might be using same key ID (kid) for different tenants, so in such cases even the invalid provider passes the signature validation.

In general practice, Claim Validation Comes after Signature Validation, when the invalid provider is sent back from TMM it fails Claim Validation in APMD.

Impact:
The policy rule displays the deny page.

Workaround:
None


1195377 : Getting SI log for non approved RSA-1024 crypto algorithm.

Component: TMOS

Symptoms:
showing non approved algorithm as approves

Conditions:
it should not show approved log for non approved algorithms

Impact:
Creating keys for approved algorithms only

Workaround:
Changing log statements or not at all creating key for non approved algorithms


1195125 : "Failed to allocate memory for nodes of size 0, no variables found in query" BD log message fix

Links to More Info: BT1195125

Component: Application Security Manager

Symptoms:
A GraphQL query without variables in its query will cause the error message to be reported in BD logs, even though it's not an error.

Conditions:
A request with GraphQL query without variables.

Impact:
Error prints in the enforcer logs.


1194745 : The multi-thread use case in LDAP cache reads APMD crash

Links to More Info: BT1194745

Component: Access Policy Manager

Symptoms:
The LDAP server is held by multiple threads and other threads are waiting for the same function before first action completed and it had exceeded the maximum limit of AD/LDAP cache and subsequently APMD crash is observed.

Conditions:
- multi-thread use case in LDAP cache

Impact:
APMD crashes.

Workaround:
None


1194409-2 : Dropped messages seen in auditforwarder logging

Links to More Info: BT1194409

Component: TMOS

Symptoms:
Dropped message "255 State: PendingSend" is seen.

Conditions:
- Radius is configured.
- Audit forwarder is enabled.

Impact:
Although there is no problem in functionality of Radius, dropped messages are seen which is a false alarm.

Workaround:
None


1194173-2 : BIG-IP does not block the request when a parameter as a cookie has URL encoded base64 padding value

Component: Application Security Manager

Symptoms:
Attack signature check is not run on normalised parameter value.

Conditions:
- A parameter with location configured as a cookie is present
  in the parameters list.
- Request contains the explicit parameter with URL encoded
  base64 padding value.

Impact:
- Attack signature not detected.

Workaround:
None


1191349-2 : The dns_cache_derived_stat show corrupted values.

Links to More Info: BT1191349

Component: Global Traffic Manager (DNS)

Symptoms:
In few scenarios, attributes of dns_cache_derived_stat shows corrupted value. For example, server_max_wait_response as 18446744073709551615.

Conditions:
Checking the tmctl stats for dns_cache_derived_stat.

Impact:
Might create confusion for users.

Workaround:
None


1191137-3 : WebUI crashes when the localized form data fails to match the expectations

Links to More Info: BT1191137

Component: TMOS

Symptoms:
In the Chinese BIG-IP, when multicast rate limit field is checked (enabled) and updated, the webUI is crashing.

Conditions:
On the Chinese BIG-IP:
- Navigate to the System Tab > Configuration.
- In Configuration, select Local Traffic > General.
- In Multicast Section, enable Maximum Multicast Rate Checkbox and click on Update.

Impact:
Chinese BIG-IP webUI is crashing.

Workaround:
None


1191045 : AD/LDAP queue processing is stuck and being asserted by the session cleaner

Links to More Info: BT1191045

Component: Access Policy Manager

Symptoms:
In the current implementation of LDAP search which is using API "ldap_search_ext_s" where the IN parameter "timeout" is set to "NULL", it means the LDAP client will wait infinitely for the server response.
If we have not received any server response, new processing of the worker thread will not happen and it will get stuck which will cause an assert by the session cleaner.

Conditions:
In cases where the LDAP server response is not received.

Impact:
APMD crashes.

Workaround:
None


1190777-2 : Unable to add a device to a device trust when the BigDB variable icontrol.basic_auth is set to disable on target device

Component: TMOS

Symptoms:
When the DB variable "icontrol.basic_auth" is set to "disable" on a device, that device cannot be added to a device trust.

The system from which an administrator is attempting to add the new device will log an error:

err devmgmtd[5541]: 015a0000:3: getDeviceInfo failed: iControl authorization failed

Conditions:
DB variable "icontrol.basic_auth" is set to disable

Impact:
Unable to add a device to a device trust.

Workaround:
On the device being added to the trust:

1. Enable basic auth for iControl

tmsh modify /sys db icontrol.basic_auth value enable

2. Restart httpd on the device being added.

bigstart restart httpd

3. Add the device to the trust.

4. If you want mitigate ID1143073 (https://support.f5.com/csp/article/K94221585), disable basic authentication again.

tmsh modify /sys db icontrol.basic_auth value disable
bigstart restart httpd
    
The dbvar is synchronized if you add the new device to a sync/failover device group, so check each device in the device group.

Use the following to command to check if it's disabled.

# tmsh list /sys db icontrol.basic_auth
sys db icontrol.basic_auth {
    value "disable"
}

If any device has basic auth enabled, disable it and restart httpd on all devices in the device group.


1190365-3 : OpenAPI parameters with type:object/explode:true/style:form serialized incorrectly

Links to More Info: BT1190365

Component: Application Security Manager

Symptoms:
The method used by Bot Defense to serialize an OpenAPI object configured with "style:form", "explode:true", and "type:object" is not functioning as expected.

Conditions:
Repeated occurrences of parameter names in the query string with "type:object/explode:true/style:form" configured OpenAPI file.

Impact:
The violation "JSON data does not comply with JSON schema" is raised due to the repeated parameters from the query string with "array" configuration.

Workaround:
None


1189877-4 : The option /dev/random is depreciated from rndc-confgen with the latest BIND 9.16

Component: Global Traffic Manager (DNS)

Symptoms:
The option /dev/random is deprecated from the rndc-confgen after the BIND upgrade.
The keygen.sysinit scripts using the rndc-confgen with the deprecated option /dev/random leading to the failure in creation of the rndc.key file.
The ZRD daemon waits for the rndc.key but as the key creation failed the daemon waits for the key creation infinitely and will be in a down state.

Conditions:
Upgrade the BIND package from 9.11 to 9.16.

Impact:
The ZRD daemon will be down till the rndc.key is created.

Workaround:
Create the key manually without the deprecated option.


Run the following command:
bigstart stop zrd

rm -f /config/rndc.key
/usr/sbin/rndc-confgen -t /var/named -a -c /config/rndc.key
ln -sf /var/named/config/rndc.key /config/rndc.key
chown -f named:named /var/named/config/rndc.key

bigstart start zrd


1189513-4 : Media flow pinholes are not created if SDP MIME multipart body part miss the content-length header

Links to More Info: BT1189513

Component: Service Provider

Symptoms:
The SIP MRF failed to extract the SDP data and not created media flow pinholes, if SDP Multipurpose Internet Mail Extensions (MIME) multipart body is not generated with content-length header.

Conditions:
An INVITE message contained a MIME multipart payload and body parts miss content-length header.

Impact:
Media flow pinholes are not created.

Workaround:
None


1188837 : Server side timewait close state causes long establishment under port reuse on i15820DF

Links to More Info: BT1188837

Component: Local Traffic Manager

Symptoms:
When the server TCP connection is under timewait closing state, if a new client connection is initiated towards the server under the BIG-IP SYN-Cookie mode, the server will respond with ACK instead of SYN+ACK for the SYN received.

The BIG-IP system drops this ACK and retransmit the SYN, till timeout occurs.

Conditions:
- Running an i15820DF BIG-IP system.
- FastL4 profile with syn-cookie-enable set to "enabled".
- New client connection is reusing the port to get to the same server TCP connection.

Impact:
Longer establishment time and retry.

Workaround:
None


1186925-4 : When FUA in CCA-i, PEM does not send CCR-u for other rating-groups

Links to More Info: BT1186925

Component: Policy Enforcement Manager

Symptoms:
When Final Unit Action (FUA) in CCA-i, the traffic is immediately blocked for that rating-group.
But, PEM does not send CCR-u for other rating-groups any more, which causes all other rating-groups traffic to pass through.
If FUA in CCA-u, everything works as expected.

Conditions:
When FUA received in in CCA-i.

Impact:
PEM receives FUA redirect first and ignores further requests.

Workaround:
Use iRule to remove FUA in CCA-i.


1186789-2 : DNSSEC keys stored on an internal FIPS card do not work after upgrading to versions >= 16.x

Links to More Info: BT1186789

Component: Global Traffic Manager (DNS)

Symptoms:
DNSSEC signatures are not generated after the upgrade.

Conditions:
DNSSEC key stored on FIPS card;
and
Upgrade to versions >= 16.x.

Impact:
DNSSEC signing will not work.

Workaround:
Edit bigip_gtm.conf and add a hex-character after existing key generation handles to make 32-hex characters and then run these commands:
# tmsh load sys config gtm-only
# bigstart restart gtmd


1186649 : TMM keep crashing after vCMP Guest Upgrade to BIG-IP v16.1.3.2

Links to More Info: BT1186649

Component: TMOS

Symptoms:
TMM process keeps crashing after vCMP Guest Upgrade to BIG-IP v16.1.3.2.

Conditions:
Hosts running BIG-IP versions lower than 14.1.0, Guests running BIG-IP versions greater than 16.0.x.

Impact:
vCMP Guest will be down.

Workaround:
Downgrade to previous version.


1186401-2 : Using REST API to change policy signature settings changes all the signatures.

Links to More Info: BT1186401

Component: Application Security Manager

Symptoms:
When you use iControl REST to modify the signatures associated with a policy, the modifications are applied to all the signatures.

Conditions:
-- Create a policy named 'test'

-- Associate a signature set like "SQL Injection Signatures" to the policy
  For example, remove the "Generic Detection Signatures (High/Medium Accuracy)" set

-- Look at the low-risk signatures associated with the policy
 Commmand:
     curl -sku admin:admin 'https://localhost/mgmt/tm/asm/policies/MrLpFzRHNarvj_zuAOD0fw/signatures?$expand=signatureReference&$filter=signature/risk+eq+low' | jq . | head


-- Turn off staging for these signatures:
  Commands:
      curl -sku admin:admin 'https://localhost/mgmt/tm/asm/policies/MrLpFzRHNarvj_zuAOD0fw/signatures?$expand=signatureReference&$filter=signature/risk+eq+low' -d '{ "performStaging": false }' -X PATCH | jq . | head
      curl -sku admin:admin 'https://localhost/mgmt/tm/asm/policies/MrLpFzRHNarvj_zuAOD0fw/signatures?$expand=signatureReference&$filter=signature/risk+eq+low' -d '{ "performStaging": true }' -X PATCH | jq . | head

-- The "totalItems" shows that 187 signatures were changed

Impact:
The user was unable to leverage the REST API to make the desired changes to the ASM signature policy.

Workaround:
Add 'inPolicy eq true' to the filter
  Command :
      curl -sku admin:admin 'https://localhost/mgmt/tm/asm/policies/MrLpFzRHNarvj_zuAOD0fw/signatures?$expand=signatureReference&$filter=signature/risk+eq+low+and+inPolicy+eq+true' -d '{ "performStaging": false }' -X PATCH | jq . | head


1186249-2 : TMM crashes on reject rule

Links to More Info: BT1186249

Component: Local Traffic Manager

Symptoms:
The TMM crashes when the configuration has a rule that contains a reject in an HTTP_RESPONSE.

Conditions:
The crash happens when this rule is processed after a client has disconnected.

Impact:
TMM crashes every time this condition occurs.

Workaround:
If possible, avoid the use of reject or use HTTP::disable before the reject.


1185929-2 : Under rare circumstances, the TCL interpreter can crash TMM after a long time

Links to More Info: BT1185929

Component: Local Traffic Manager

Symptoms:
While using iRules with suspending commands, under rare circumstances, the TCL interpreter can crash TMM after a long time.

Conditions:
While using iRules with suspending commands, under rare circumstances, the TCL interpreter can crash TMM after a long time.

Impact:
TMM crashes.

Workaround:
None


1185605-3 : The iCall EventTriggeredHandler in non-common partition break after scriptd daemon restart

Links to More Info: BT1185605

Component: TMOS

Symptoms:
After scriptd daemon restart triggered, handler information become none/unknown in "show sys icall handler" output for the non-common partition.

Conditions:
1. Create triggered handler in non-common partition.
2. Restart the scriptd daemon or upgrade the device.

Impact:
The iCall Event Triggered Handler in non-common partition is not working after device upgrade from 15.1.2.1 to 15.1.5.1.

Workaround:
Configure iCall in common partition.


1185257-4 : BGP confederations do not support 4-byte ASNs

Links to More Info: BT1185257

Component: TMOS

Symptoms:
The BGP confederations do not support 4-byte AS numbers. Only 2-byte ASNs are supported.

Conditions:
Using BGP confederations.

Impact:
Unable to configure 4-byte AS number under BGP confederation.

Workaround:
None


1185133-2 : ILX streaming plugins limited to MCP OIDs less than 10 million

Links to More Info: BT1185133

Component: Local Traffic Manager

Symptoms:
When trying to get started with iRules LX, every script attempted results in the following error:
"Sep 16 11:16:26 pid[6958] streaming tm_register failed"

Conditions:
MCP configuration (MCP OID's) should go beyond 10 million.

Impact:
Unable to run iRules LX streaming plugins.

Workaround:
The below command forces MCPD to load the configuration from the text file with an empty database, thus the OID counter is reset to 0.

bigstart stop
rm -f /var/db/mcpdb*
bigstart start


1184853 : Youtube video not classified in the BIG-IP version 16.1.0

Component: Traffic Classification Engine

Symptoms:
Youtube traffic getting classified as UDP only

Conditions:
NA

Impact:
Unable to classify the traffic.

Workaround:
NA


1184841-2 : Header Based Content Profile is synced differently to peer unit in auto-sync mode, when updating URL through REST API

Component: Application Security Manager

Symptoms:
Header Based Content Profile is synced differently to peer unit in auto-sync mode, when updating URL through REST API.

Conditions:
- ASM-Sync enabled
- Auto-Sync enabled
- Updating URL through REST API

Impact:
Configuration will be de-synced.

Workaround:
Use TMUI to update configuration.


1184629-2 : Validate content length with respective to SIP header offset instead of parser offset

Component: Service Provider

Symptoms:
The SIP parser is validating the content length of the SIP message with respective to the parser offset instead of SIP actual header. Validating the content length with parser offset is inaccurate.

Conditions:
The SIP message should have content length greater than zero and should have content.

Impact:
The SIP parser is calculating the SIP message body size inaccurately.

Workaround:
None


1184153-2 : TMM crashes when you use the rateshaper with packetfilter enabled

Links to More Info: BT1184153

Component: Local Traffic Manager

Symptoms:
Tmm might crash when you use the packet-filter with the packetfilter.established option enabled, and when rate-class is applied via packet-filter rule.

Conditions:
- packet-filter with packetfilter.established option enabled.
  AND
- rate-class is applied via packet-filter rule.

Impact:
TMM crash/failover.

Workaround:
Do not apply rate-class via packetfilter or disable the packetfilter.established option.


1183877-2 : CGNAT related links are unavailable in Statistics section

Links to More Info: BT1183877

Component: Carrier-Grade NAT

Symptoms:
Following webUI links are unavailable:

Statistics >> Analytics >> LSN Pools
Statistics >> Module Statistics >> Carrier Grade Nat

Conditions:
CGNAT enabled and provisioned

Impact:
CGNAT related statistical pages cannot be accessed from Statistics section.

Workaround:
None


1182993 : MCPD returns dossier error 01 after reboot

Component: TMOS

Symptoms:
-BIGIP goes to an Inoperative state
-/var/log/ltm display below error
Dossier error: 01
The license is not operational (expired or digital signature does not match contents).

Conditions:
If the locking bit of the dossier mac address field is set to 1 for generated license and When the hardware mac address changes (mac address of hyper-v or VMware or BIGIP bare metal).

Impact:
The mcpd validation fails, and BIG-IP is set to an Inoperative state.

Workaround:
None


1182353-3 : DNS cache consumes more memory because of the accumulated mesh_states

Links to More Info: BT1182353

Component: Global Traffic Manager (DNS)

Symptoms:
DNS cache consumes more memory and the mesh_states are accumulated quickly.

Conditions:
Mixed queries with rd flag set and cd flag set/unset.

Impact:
TMM runs out of memory.


1182305-2 : Descriptions requested for IPS IDs

Links to More Info: BT1182305

Component: Protocol Inspection

Symptoms:
Few inspection IDs of signatures in IPS do not have a complete description.

Conditions:
Navigate to Security > Protocol Inspection and create a profile for any of the services like HTTP, DNS, or FTP and check the inspection IDs mentioned in the description.

Impact:
No functional impact.

Workaround:
None


1181833-2 : Content is not updating under respective tab of webUI when CSRF enabled

Links to More Info: BT1181833

Component: Application Security Manager

Symptoms:
The JS tabs under webUI are not functional and content is not being updated.

Conditions:
- When CSRF feature is enabled.

Impact:
- Content is not visible under individual tabs when clicked on any tab button in the webUI.

Workaround:
None


1181757-4 : BGPD assert when sending an update due to cq_wbuf mishandling

Links to More Info: BT1181757

Component: TMOS

Symptoms:
BGPD might trip an assert when sending an update due to buffer space mishandling.

Conditions:
No straightforward way to reproduce it. It requires a specific update layout to get triggered.

At a minimum you need 2 BGP peers (the more the better) sending at least 800 prefixes each (need to fill around 4096 bytes when sending a withdrawn update - 5 bytes/prefix + headers).
Also, send at least 800 prefixes towards these peers. Adding as-path prepending and/or communities when sending these routes towards remote peers will greatly increase the chances of hitting the problem.

Impact:
BGPD may get crash or core rarely.

Workaround:
None


1181613-1 : IPsec IKEv2: BIG-IP version 16.1.0 introduced RFC5996 non-compliance in IKE SA delete

Links to More Info: BT1181613

Component: TMOS

Symptoms:
After the deletion of an IKE SA, the child IPsec SAs will not be deleted.

Conditions:
-- IKEv2 IPsec tunnels
-- Tunnels use Route Domains.
-- An IPsec SA is deleted.

Impact:
The BIG-IP believes it still has valid IPsec SAs to use, while the remote peer does not. In this case, if the BIG-IP is normally the initiator, the tunnel will be unusable until the lifetime expires on the existing IPsec SAs.


1178221-3 : In IPsec IKEv2, packet memory corruption after retransmitted ISAKMP with NAT

Links to More Info: BT1178221

Component: TMOS

Symptoms:
When the retransmit happens, and other side is not reachable, the BIG-IP logs the "err packet length does not match field of ikev2 header" and then "ERR dropping unordered message".

Conditions:
Tunnel is established between Initiatior and Responder.
Responder is able to send DPD request. but not able to receive response.

Impact:
Wrong information logged.
DPD response packet corruption.

Workaround:
None


1174085-1 : spmdb_session_hash_entry_delete releases the hash's reference

Links to More Info: BT1174085

Component: Policy Enforcement Manager

Symptoms:
multiple references accessing and trying to modify the same entry

Conditions:
when failover from active to stand by while stalling the connection

Impact:
Illegal access of the memory.

Workaround:
NA


1174033-2 : The UPDATE EVENT is triggered with faulty session_info and resulting in core

Links to More Info: BT1174033

Component: Policy Enforcement Manager

Symptoms:
The UPDATE EVENT requires a proper initialization of the session_info which in turn is used to set the tcl pcb's cmdctx. With properly defined cmdctx, the sess_data is populated successfully. But, without proper initialization of the session_info makes the cmdctx to carry incorrect vaules, thus resulting in a core when populating the sess_data.

Conditions:
Enable the Global UPDATE-EVENT option and make sure you log
some session attributes as part of the UPDATE EVENT.

Impact:
Results in a core.

Workaround:
None


1173669-1 : Unable to reach backend server with Per Request policy and Per Session together

Component: Access Policy Manager

Symptoms:
It is observed that backend pool is not reachable.

Conditions:
The OAuth case with Per Request policy and Per Session together.

Impact:
Backend Pool is not reachable.

Workaround:
None


1173493-4 : Bot signature staging timestamp corrupted after modifying the profile

Links to More Info: BT1173493

Component: Application Security Manager

Symptoms:
Bot signature timestamp is not accurate.

Conditions:
Have a bot signature "A" in staging, record the timestamp.
Using webUI, set another bot signature "B" to be in staging and click Save.
The time stamp on "A" is updated and shows the year 1970 in webUI.

Impact:
Can not verify from when the signature was in staging.

Workaround:
Use TMSH, instead of webUI, to update the profile.


1173441-3 : The 'tmsh save sys config' call is being triggered when REST Authentication tokens (X-F5-Auth-Token) are deleted or expired

Component: TMOS

Symptoms:
The 'tmsh save sys config' call is being triggered when REST authentication tokens (X-F5-Auth-Token) are deleted or expired.

Conditions:
The REST authentication tokens (X-F5-Auth-Token) are deleted or expired.

Impact:
There is no functional impact. However, in the BIG-IPs where there is huge configuration, a 'tmsh save sys config' call takes a lot of time and thus impacts the performance.

Workaround:
None


1169141-3 : Bash tab-completion of '~' to '\~'

Links to More Info: BT1169141

Component: TMOS

Symptoms:
With the fix of CVE-2012-6711 for bash vulnerability, the bash tab completion of ~ is auto completing it to \~, which is resulting in not listing the directories under ~.
In earlier versions without the fix
# cd ~
~adm/ ~daemon/ ~lp/ ~nobody/
With the fix for CVE,
# cd \~ (even though we press cd ~, it is auto completing to cd \~)

The suggestions were not listed.

Conditions:
This issue is seen on the versions which have fix for Bug 830361 (https://cdn.f5.com/product/bugtracker/ID830361.html).

Impact:
Tab-completion of user home directories (~username) in bash does not work.

Workaround:
Do not attempt to tab-complete user home directories (e.g. ~root), and instead type out the path completely.


1168137-3 : PEM Classification Auto-Update for month is working as hourly

Component: Traffic Classification Engine

Symptoms:
After configuring PEM classification signature auto-update as monthly, but it runs on hourly.

If the update schedule is set to daily or weekly, then the latest IM package is downloaded based on the set update schedule. But, when it is set to monthly, it is working on hourly.

Conditions:
Automatic updates for classification signatures is configured and enabled, and update schedule should be set to monthly.

Impact:
Classification update is not working on monthly basis.

Workaround:
None


1167985-2 : Network Access resource settings validation errors

Links to More Info: BT1167985

Component: Access Policy Manager

Symptoms:
When trying to add "0.0.0.0/1" under the IPV4 LAN Address Space and in a Network Access resource, the UI would throw such error:
"Invalid IP or Hostname"
 
When trying to add DNS Exclude Address Space starting with an underscore (such as "_ldap._tcp.dc._msdcs.test.lan"), the UI would throw such error:
01b7005b:3: APM Network Access (/Common/test) DNS name (_ldap._tcp.dc._msdcs.test.lan) is not a valid domain name

Conditions:
Use a Network Access resource in split tunneling mode.
Add "0.0.0.0/1" under the IPV4 LAN Address Space
Add DNS Exclude Address Space starting with an underscore

Impact:
Administrators could not correctly configure some network access resource settings.


1167953-2 : Issue with UI, while opening rule name in Packet Tester to check the rule for the drop reason

Links to More Info: BT1167953

Component: Advanced Firewall Manager

Symptoms:
Create a Firewall policy and add a rule list to it and simulate a trace using packet tester matching to the rule.

Conditions:
Firewall policy with rule list should be created, AFM should be provisioned.

Impact:
Unable to redirect to the rule on GUI - packet tester.

Workaround:
After simulating a trace using packet tester, see the rule name under virtual server rules and navigate to Security > Network Firewall > RuleLists page and access the rule.


1167941-3 : CGNAT SIP ALG INVITE loops between BIG-IP and Server

Component: Service Provider

Symptoms:
On an inbound call on the ephemeral listener, if the INVITE message TO header is not registered, and From header is registered, then INVITE is sent out on the ephemeral listener which might cause a loop issue, if the server sends back the INVITE to BIG-IP again.

Conditions:
It occurs with inbound calls.

Impact:
It could lead to performance issue if the loop continues.

Workaround:
Step 1 or 2 can be used as a workaround based on the use case.
1)If the From and To headers are the same, 400 bad response is given.
Also, the packets are dropped in case the destination address is not translated.

ltm rule sip_in_rule {

    when SIP_REQUEST_SEND {
        if {[SIP::method] == "INVITE" && [IP::addr [IP::remote_addr] equals $localAddr]} {
            SIP::discard
        }
    }

    when SIP_REQUEST {
        set localAddr [IP::local_addr]
        set from [substr [SIP::header from] 0 ";"]
        set to [substr [SIP::header to] 0 ";"]
        if {[SIP::method] == "INVITE" && $from equals $to} {
            SIP::respond 400 "Bad Request"
        }
}

(tmos)# modify ltm virtual vs_alg_sip_private { rules { sip_in_rule } }


2)below Irule would drop all inbound calls.

ltm rule sip_drop_rule {
   when MR_INGRESS {
        if { [MR::transport] contains "_$" } {
            MR::message drop
        }
    }
(tmos)# modify ltm virtual vs_alg_sip_private { rules { sip_drop_rule } }


1167889 : PEM classification signature scheduled updates do not complete

Component: Traffic Classification Engine

Symptoms:
After configuring PEM classification signature updates to run at an defined interval, the updates may not actually occur.

Via tmsh:

   ltm classification auto-update settings { }

via GUI:

   Traffic Intelligence -> Applications -> Signature Update -> Automatic Update Settings


In the /var/log/ltm log, the following message may be seen

mcpd[xxxx]: 01070827:3: User login disallowed: User (guest) is not an administrator, does not have a UID of zero, and has not been assigned a role on a partition.

Conditions:
Automatic updates for classification signatures is configured and enabled.

Impact:
The classification updates do not occur.

Workaround:
Run the classification update manually.


1166937-1 : The path_match is missing in RCL path when path_match string is "Any String"

Links to More Info: BT1166937

Component: Access Policy Manager

Symptoms:
The capital letter "A" should be generated at the end while "Any String" is selected in RCL builder in webUI.

Conditions:
- Go to rewrite profile and create a new rewrite profile.
- Enable split tunneling in the webUI.
- Go to RCL builder and select "Any String" and leave the path empty.
- Click Add On.
- Update the page.

Impact:
The capital letter "A" at the end of the RCL list is not appended while "Any String" is selected for Path Match field of the RCL builder

Workaround:
None


1166481-3 : The vip-targeting-vip fastL4 may core

Links to More Info: BT1166481

Component: Local Traffic Manager

Symptoms:
The TMM cores or VIP does not behave as expected.

Conditions:
- fastL4 virtual
- iRule uses virtual command to redirect flows to a second fastL4 virtual
- first virtual configuration is changed before a flow times out

Impact:
Configuration data is freed but continued to be used by the flow, leading to the configuration appearing to be corrupted causing cores or unexpected behavior.

Workaround:
Ensure that there are no active flows for the virtual being changed.


1166449-2 : APM - NTLM authentication will stop working if any of DC FQDN is not resolvable in the configured DC list

Links to More Info: BT1166449

Component: Access Policy Manager

Symptoms:
NTLM authentication will stop working.

Conditions:
If any of the DC FQDN is not resolvable in the configured NTLM Auth Config DC list during below scenarios:
- Create/Modify NTLM Auth Configuration
- Restart ECA/NTLM service
- Restart, Power cycle or after upgrade
- Active/Stand by switch over.

Impact:
NTLM authentications targeted towards this NTLM Auth Config will start to fail.

Workaround:
User need to remove the non-resolvable DC FQDN from the NTLM Auth configuration's DC list.


1166329-2 : The mcpd process fails on secondary blades, if the predefined classification applications are updated.

Links to More Info: BT1166329

Component: TMOS

Symptoms:
If a user installs and deploys a classification update (classification-update-*.im) the predefined classification applications are changed to "user modified".

This change causes the mcpd process to fail and restart on secondary blades during startup.

Conditions:
- Multi-slot VIPRION or vcmp guest
- PEM provisioned
- Classification applications updated either with tmsh load sys config merge or by using the Signature Update option in the Traffic Intelligence tab from the GUI or tmsh

Impact:
No impact

Workaround:
None


1162661-3 : The Bad Actor (BA) hit counter is not updating for ICMP vector during hardware mitigation

Component: Advanced Firewall Manager

Symptoms:
The hardware mitigation was not proper due to spva ba_hit statistics not generated.

Conditions:
Configure BA with rate limits for ICMP vectors at virtual server level.

Impact:
Attack traffic will get pass through because of ba_hit is not updating.

Workaround:
None


1162221-2 : Probing decision will skip local GTM upon reboot if net interface is not brought up soon enough

Links to More Info: BT1162221

Component: Global Traffic Manager (DNS)

Symptoms:
Resources will be marked timed out.

Conditions:
iQuery connection between local gtmd and big3d is not established before probing decision is made.

Impact:
Resources be marked DOWN unexpectedly.

Workaround:
Modify max-synchronous-monitor-requests to a new value which will trigger probing decision re-evaluation.


1162081-6 : Upgrade the bind package to fix security vulnerabilities

Component: Global Traffic Manager (DNS)

Symptoms:
Upgrade the bind package to fix the following security vulnerabilities:

- CVE-2022-2795
- CVE-2022-2881
- CVE-2022-3080
- CVE-2022-38177
- CVE-2022-38178

Conditions:
Upgrade the bind package to fix the following security vulnerabilities:

- CVE-2022-2795
- CVE-2022-2881
- CVE-2022-3080
- CVE-2022-38177
- CVE-2022-38178

Impact:
Upgrade the bind package to fix the following security vulnerabilities:

- CVE-2022-2795
- CVE-2022-2881
- CVE-2022-3080
- CVE-2022-38177
- CVE-2022-38178

Workaround:
None


1161965-3 : File descriptor(fd) and shared memory leak in wr_urldbd

Links to More Info: BT1161965

Component: Traffic Classification Engine

Symptoms:
When updating the customdb, fd and shared memory leaks were observed in wr_urldbd.

Conditions:
The issue happens when a urldb feed list is modified multiple times in a loop.

Impact:
Updating customdb will not work.

Workaround:
No


1161913-1 : Upgrade from 15.1.8 to 16.x or 17.x fails, and leaves device INOPERATIVE

Links to More Info: BT1161913

Component: TMOS

Symptoms:
Loading configuration process fails after an upgrade from 15.1.8 to any release 16.0 or above.

The system posts errors similar to the following:

-- crit tmsh[16188]: 01420001:2: Can't load keyword definition (vlan.dag_adjustment) : framework/SchemaCmd.cpp, line 825
-- crit tmsh[25644]: 01420001:2: Can't load keyword definition (vlan.nti) : framework/SchemaCmd.cpp, line 825
-- Can't find matched schema tag for association's attribute fw_zone_log_profile.pzname during loading cli version syntax: 15.1.8
-- Can't find matched schema tag for association's attribute fw_protected_zone.pzname during loading cli version syntax: 15.1.8
-- Unexpected Error: "Can't load keyword definition (vlan.dag_adjustment)"
-- fatal: (Can't load keyword definition (vlan.nti)) (framework/SchemaCmd.cpp, line 825), exiting...
-- emerg load_config_files[16186]: "/usr/bin/tmsh -n -g -a load sys config partitions all base " - failed. -- Loading schema version: 15.1.8
-- err mcpd[10702]: 01070422:3: Base configuration load failed.

Conditions:
Upgrade from one of the following releases:

-- v15.1.8 or later in the v15.1.x branch.

to any of the following releases:

-- v16.0 through v16.1.3.2
-- v17.0 through v17.0.0.1

Impact:
After upgrade, config does not load. The system hangs at the base configuration load failure status. The system is inoperative.

Workaround:
It is not possible to avoid running into a config load failure when attempting the upgrade or restoring a UCS archive from v15.1.8 on one of the listed versions. However, as long as the systme is not using the ZBDDOS AFM functionality, it is possible to load the configuration after the upgrade via a manual workaround:

1. While the system is inoperative, log into the system as root or an administrative user and launch bash.

2. Copy and paste the following series of commands and run them in bash

### BEGIN COMMANDS
(shopt -s nullglob; sed -E -i.workaround.bak -e '/dag-adjustment /d' /config/bigip_base.conf /config/partitions/*/bigip_base.conf)
sed -E -i -e '/^KEYWORD dag-adjustment/d' -e '/^KEYWORD nti/d' /var/libdata/tmsh/syntax/15.1.8/auto_schema_data_net_cli.dat

mv /var/libdata/tmsh/syntax/15.1.8/auto_schema_data_security_cli.dat{,.workaround.bak}
awk '
    /^<REF_CMD fw-protected-zone / { refcmd=1; depth=1; next }
    /^<CMD fw-protected-zone/ { cmd=1; depth=1; next }
    /^<ASSOCIATION.*fw-protected-zone/ { depth=depth+1; next }
    /^>/ {
        if (refcmd || cmd) {
            if (!--depth) {
                refcmd = 0;
                cmd = 0;
            }
            next;
        }
    }
    /.?/ {
        if (refcmd || cmd) next
        print
    }' < /var/libdata/tmsh/syntax/15.1.8/auto_schema_data_security_cli.dat.workaround.bak > /var/libdata/tmsh/syntax/15.1.8/auto_schema_data_security_cli.dat
rm /var/libdata/tmsh/syntax/15.1.8/auto_schema_data_security_cli.dat.workaround.bak
### END COMMANDS

3. Load the configuration again:

   tmsh load sys config

4. If the config loads successfully, save it once:

   tmsh save sys config


1161241-5 : BIND default behavior changed from 9.11 to 9.16

Component: Global Traffic Manager (DNS)

Symptoms:
The default behavior of BIND configurations for minimal-responses and dnssec-validation is changed in BIND 9.16 and leaving the issues for existing test cases and expected behavior.

Conditions:
Upgrade BIND package from version 9.11.36 to 9.16.27.

Impact:
Behavior change for minimal-responses and dnssec-validation.

Workaround:
None


1159569-2 : Persistence cache records may accumulate over time

Links to More Info: BT1159569

Component: Local Traffic Manager

Symptoms:
The persistence cache records accumulate over time if the expiration process does not work reliably. The 'persist' memory type grows over time when multiple TMMs are sharing the records.

Conditions:
- Non-cookie, persistence configured.
- Multi TMM box
- Traffic that activates persistence is occurring.

Impact:
Memory pressure eventually impacts servicing of traffic in multiple ways. Aggressive mode sweeper runs and terminates active connections. TMM may restart. Traffic is disrupted while TMM restarts.

Workaround:
None


1159397-1 : The high utilization of memory when blade turns offline results in core

Links to More Info: BT1159397

Component: Policy Enforcement Manager

Symptoms:
The TMM memory utilization continue to increase after a blade turns offline.

Conditions:
Blade turns offline.

Impact:
The TMM memory utilization will finally cause out-of-memory errors or cores and TMM processes will restart. The service will be interrupted.

Workaround:
None


1156889-3 : TMM 'DoS Layer 7' memory leak during Bot Defense redirect actions

Links to More Info: BT1156889

Component: Application Security Manager

Symptoms:
When using bot-defense profile with a browser verification and performing redirect actions, there is a memory leak in TMM.

Conditions:
- The bot-defense profile with "Verify After Access" or "Verify Before Access" browser verification is configured.
- Surfing using a browser, during grace period (5 Minutes after config change) to a non-qualified URL, or configuring "Validate Upon Request" in "Cross Domain Requests" configuration, and configuring A and B as "Related Site Domains".
- Surfing using a browser from Domain A to Domain B.

Impact:
Degraded performance, potential eventual out-of-memory.

Workaround:
None


1156697-3 : Translucent VLAN groups may pass some packets without changing the locally administered bit

Links to More Info: BT1156697

Component: Local Traffic Manager

Symptoms:
Translucent VLAN groups may pass some packets without changing the locally administered bit.

Conditions:
The destination mac address of the ingress packet does not match the nexthop.

Impact:
Connections may fail, packet captures show the packets being egressed the VLAN group with the locally administered bit set.

Workaround:
None


1156149-1 : Early responses on standby may cause TMM to crash

Links to More Info: BT1156149

Component: Service Provider

Symptoms:
TMM cores with an early response and retransmit mechanism and has also happened during a failover event.

Conditions:
If the response of the request message reaches before the request on standby box.

Impact:
Causes a failover while TMM is restarting.

Workaround:
None


1156105-2 : Proxy Exclusion List is not configurable if VLAN group and route-domain are in non default partition

Links to More Info: BT1156105

Component: Local Traffic Manager

Symptoms:
Unable to add IP apart from /Common to Proxy Exclusion List.

Conditions:
- Route-Domain is created with default-route-domain in same partition.

#tmsh create auth partition part5
#tmsh create net route-domain /part5/rd5 id 5
#tmsh modify auth partition part5 default-route-domain 5

Impact:
The following command fails:
tmsh modify net vlan-group /part5/RD5-VLAN-GRP proxy-excludes add { 10.10.20.196 }

Workaround:
- The following command is used to create route-domain in /Commom:
   #tmsh create net route-domain /part5/rd5 id 5
   Modify this command as following:
   #tmsh create net route-domain rd5 id 5

- Manually edit the bigip.conf file in partitions and add IP address manually, and then reload the config.


1155733-1 : NULL bytes are clipped from the end of buffer

Component: TMOS

Symptoms:
In logs the key length is less then the actual key length.

Conditions:
- Establish IPSec tunnel.
- Check the logs.

Impact:
Incomplete information in the logs.

Workaround:
None


1155393-2 : Failure to remove chunk headers from chunked response with Rewrite/HTML profile and compression

Links to More Info: BT1155393

Component: Local Traffic Manager

Symptoms:
The BIG-IP fails to remove chunk headers when compressing a chunked response from a pool member.

The chunk headers are compressed and delivered to the client as part of the payload.

Conditions:
-- Version with the fix for ID902377
-- Rewrite/HTML profile
-- Compression profile
-- Chunked response from pool member (With "Transfer-Encoding: Chunked" header)
-- HTTP response eligible for compression

Impact:
Chunk header and terminating 0 length chunk are compressed and delivered to the client as part of the payload, resulting in broken application functionality.

Workaround:
Remove the compression profile, or modify the compression profile to ensure the response in question is no longer eligible for compression.


1154725-4 : Custom or predefined method is not changing the behavior while changing from GET to POST method

Component: Application Security Manager

Symptoms:
Changing the user defined method from GET to POST is not changing the behavior, it will change the behavior
once we delete the user defined method and add it back again.

Conditions:
Configure flows to URLs of Act as Method.

Impact:
Flow enforcement will not match the expected method.

Workaround:
Delete the custom method and recreate again with require GET
 or POST method.


1154685-3 : Error log "Database error (13)" seen during the bootup

Links to More Info: BT1154685

Component: TMOS

Symptoms:
Database error (13) will be logged in /var/log/ltm during the bootup if the VLAN is created on the device.

Following is an example:

Log: err mcpd[]: 01070710:3: Database error (13), Cannot update_indexes/checkpoint DB object, class:private_mac_addr_freelist status:13 - EdbCfgObj.cpp, line 127.

Conditions:
-- Configure the VLAN

Impact:
It is a cosmetic error and observed only once during the bootup.

Workaround:
None


1154381-4 : The tmrouted might crash when management route subnet is received over a dynamic routing protocol

Links to More Info: BT1154381

Component: TMOS

Symptoms:
The tmrouted might crash when management route subnet is received over a dynamic routing protocol.

Conditions:
- Management route subnet is received over a dynamic routing protocol.
- Multi-bladed VIPRION.
- Blade failover or IP address change occurs.

Impact:
Dynamic routes are lost during tmrouted restart.

Workaround:
Do not advertise a management subnet over a dynamic routing protocol towards BIG-IP. Use route-map to suppress incoming update.


1153865-4 : Restjavad OutOfMemoryError errors and restarts after upgrade

Links to More Info: BT1153865

Component: TMOS

Symptoms:
After upgrade to an affected version, restjavad restarts intermittently or frequently, and/or may use high CPU.

The restjavad logs, /var/log/restjavad.X.log, may report the following errors:
 java.lang.OutOfMemoryError: Java heap space

restjavad may instead, or as well, run many full garbage collection cycles one after another, causing high CPU. This will be shown by frequent logs with [FullGC] in /var/log/restjavad-gc.log.X.current

Conditions:
- Update to affected version: 14.1.5.1-, 15.1.7-, 16.1.3.1-, 17.0.0.1- or later versions.
- Value of sys db restjavad.useextramb is true.
- Value of sys db provision.restjavad.extramb is 192 or lower than previous restjavad heap size.
- Use of REST API calls that need a lot of memory. Heavy users of REST API may be very affected such as SSLO.

Impact:
May have problems in TMUI with certain pages or tabs, such as network map with very config or SSLO or iLX related tabs.

Other services that use REST API, internal and external to BIG-IP, may be impacted with low performance or service instability

Workaround:
Before upgrade - if you set sys db restjavad.useextramb to value false before install of new version you will have more restjavad memory, the default 384MB, after upgrade.

  tmsh modify sys db restjavad.useextramb value false

If you restart restjavad you can see if that value works before upgrade. If you don't restart then it will come into effect after reboot.

If that no longer has issues after update then leave that setting at false. Otherwise set back to true (no restart) and increase provision.restjavad.extramb as in After upgrade section below.

After upgrade:
Set sys db provision.restjavad.extramb to an appropriate value and restart restjavad.

Run the following command:

  tmsh modify sys db provision.restjavad.extramb value X
  bigstart restart restjavad

Iterate as necessary.

The value of X is derived by using one of the following formulae:

- When updating from versions before 14.1.4 and 15.1.3, to affected versions, a value that preserves the maximum previous restjavad heap size is:
  192MB + 80% of MIN(provision.extramb|2500)
the minimum possible heap size was:
  192MB + 20% of MIN(provision.extramb|2500)
The actual restjavad heap size would be between those extremes. SSLO systems would typically need the maximum.

- When updating from 14.1.4-14.1.5, from 15.1.3-15.1.6.1 or from 16.0.x to affected versions:
  384MB + 80% of MIN(provision.extramb|2500)

- When updating from 16.1.0-16.1.3 or from 17.0.0.0 to affected versions:
  384MB + 90% of MIN(provision.extramb|4000)


1153853-4 : Revision of default value for provision.restjavad.extramb to avoid OOM errors in restjavad

Links to More Info: BT1153853

Component: TMOS

Symptoms:
- restjavad may be out memory as determined from restjavad logs, /var/log/restjavad.X.log, showing 'java.lang.OutOfMemoryError'. This may lead to frequent restjavad restarts and high CPU.
- restjavad may instead, or as well, run many full garbage collection cycles one after another, causing high CPU. This will be shown by frequent logs with [FullGC] in /var/log/restjavad-gc.log.X.current

Conditions:
- Update to affected version: 14.1.5.1-, 15.1.7-, 16.1.3.1-, 17.0.0.1- or later versions.
- Value of sys db restjavad.useextramb is true.
- Value of sys db provision.restjavad.extramb is 192 or lower than previous restjavad heap size.
- Use of REST API calls that need a lot of memory. Heavy users of REST API may be very affected such as SSLO.

Impact:
May have problems in TMUI with certain pages or tabs, such as network map with very config or SSLO or iLX related tabs.

Other services that use REST API, internal and external to BIG-IP, may be impacted with low performance or service instability

Workaround:
Before upgrade - if you set sys db restjavad.useextramb to value false before install of new version you will have more restjavad memory, the default 384MB, after upgrade.

  tmsh modify sys db restjavad.useextramb value false

If you restart restjavad you can see if that value works before upgrade. If you don't restart then it will come into effect after reboot.

If that no longer has issues after update then leave that setting at false. Otherwise set back to true (no restart) and increase provision.restjavad.extramb as in After upgrade section below.

After upgrade:
Set sys db provision.restjavad.extramb to an appropriate value and restart restjavad.

Run the following command:

  tmsh modify sys db provision.restjavad.extramb value X
  bigstart restart restjavad

Iterate as necessary.

The value of X is derived by using one of the following formulae:

- When updating from versions before 14.1.4 and 15.1.3, to affected versions, a value that preserves the maximum previous restjavad heap size is:
  192MB + 80% of MIN(provision.extramb|2500)
the minimum possible heap size was:
  192MB + 20% of MIN(provision.extramb|2500)
The actual restjavad heap size would be between those extremes. SSLO systems would typically need the maximum.

- When updating from 14.1.4-14.1.5, from 15.1.3-15.1.6.1 or from 16.0.x to affected versions:
  384MB + 80% of MIN(provision.extramb|2500)

- When updating from 16.1.0-16.1.3 or from 17.0.0.0 to affected versions:
  384MB + 90% of MIN(provision.extramb|4000)


1148181 : SSL TLS1.3 connection terminates with "empty persist key" error when SSL persistence is enabled and session tickets are disabled

Links to More Info: BT1148181

Component: Local Traffic Manager

Symptoms:
SSL TLS1.3 handshake fails.

Conditions:
- TLS1.3 should be enabled in the clientssl profile.
- session ticket should be disabled in the clientssl profile.
- Persistence should be enabled in the virtual server.

Impact:
TLS1.3 SSL handhshakes will fail.

Workaround:
Either disabling persistence in the virtual server or enabling session-ticket in the clientssl profile


1148065-2 : HTTP::header exists and value iRule commands will not return successful even if the header is present

Links to More Info: BT1148065

Component: Local Traffic Manager

Symptoms:
Virtual Servers configured with the fastHTTP profile will always have the iRule commands and HTTP::header exists and value return as not found, even if the header is present.

Conditions:
A virtual server configured with fastHTTP, and an iRule that makes use of either the HTTP::header exists or value commands.

Impact:
The iRules may not perform as expected when the HTTP header is already present, as HTTP::header exists and value will not find it.

Workaround:
None


1148009-2 : Cannot sync an ASM logging profile on a local-only VIP

Links to More Info: BT1148009

Component: Application Security Manager

Symptoms:
If an ASM profile, such as a logging profile is applied to a virtual that is local-only, then the state changes to "Changes Pending" but configuration sync breaks.

Conditions:
- ASM provisioned
- high availability (HA) pair
- ASM profile, such as a logging profile is applied to a virtual that is local-only.

Impact:
The state changes to "Changes Pending" but configuration sync breaks.

Workaround:
None


1146377-2 : FastHTTP profiles do not insert HTTP headers triggered by iRules

Links to More Info: BT1146377

Component: Local Traffic Manager

Symptoms:
Virtual servers configured with the FastHTTP profile will not insert HTTP headers even when triggered by iRules.

Conditions:
A virtual server configured with FastHTTP, and an iRule that would insert an HTTP header.

Impact:
The expected headers will not be inserted on packets sent to servers.

Workaround:
None


1146241-2 : FastL4 virtual server may egress packets with unexpected and erratic TTL values

Links to More Info: BT1146241

Component: Local Traffic Manager

Symptoms:
A FastL4 virtual server may egress (either towards the client or the server) IP packets with unexpected and erratic TTL values. The same also applies to IPv6, where the TTL field is known as Hop Limit.

Conditions:
- The BIG-IP system is a Virtual Edition (VE).

- The Large Receive Offload (LRO) is enabled on the system (which it is by default), and is operating in software mode. You can determine whether LRO is enabled on the system by inspecting the tm.tcplargereceiveoffload DB key, and you can determine whether LRO is operating in software mode by trying to query the tcp_lro tmstat table (tmctl -d blade tcp_lro). If the table exists, LRO will be operating in software mode.

- The FastL4 profile is configured to decrement the TTL (this is the default mode).

- The virtual server uses mismatched IP versions on each side of the proxy (for example, an IPv6 client and an IPv4 server).

Impact:
Depending on the actual TTL values that will be sent out on the wire (which can be random and anything within the allowed range for the field) traffic can be dropped by routers on the way to the packet's destination.

This will happen if there are more routers (hops) on the way to the packet's destination than the value specified in the TTL field.

Ultimately, this will lead to retransmissions and possibly application failures.

Workaround:
You can work around this issue by doing either of the following things:

- Disable LRO on the BIG-IP system by setting DB key tm.tcplargereceiveoffload to disable.

- Use a TTL mode for the FastL4 profile other than decrement (for example, use proxy or set).


1146017-1 : WebUI does not displays error when parent rewrite profile is not assigned to user defined rewrite profile

Component: TMOS

Symptoms:
WebUI does not show error when parent profile is empty.

Conditions:
1) Navigate to Access > Connectivity/VPN > Portal Access > Rewrite.
2) Enter the details, do not assign any parent rewrite profile.
3) Click Create.

Impact:
No webUI error is seen as parent profile is not assigned to user defined rewrite profile.

Workaround:
Enter details in the parent profile field and click Create.


1145989-2 : ID token sub-session variables are not populated

Links to More Info: BT1145989

Component: Access Policy Manager

Symptoms:
When refresh token is used, ID token sub-session variables are not populated.

Conditions:
- Configured APM as OAuth Client in per-request policy.
- OIDC is enabled.
- After token expires and refresh token is used to fetch new token (grant_type=refresh_token).

Impact:
The sub-session variables related to the ID token are not populated when APM per-request policy uses a refresh token to request a new access token and ID token.

Workaround:
None


1145749-4 : Locally defined BIG-IP users can be lost during a failed config-sync

Links to More Info: BT1145749

Component: TMOS

Symptoms:
If a configuration sync to a BIG-IP devices fails, for example, due to an MCPD validation error, locally-defined users on the receiving BIG-IP device may be lost.

This issue applies to locally-defined users (for accessing the management UI or CLI), but does not affect the built-in "admin" or "root" logins.

The users will still be present in /config/bigip_user.conf, but will be missing from /etc/passwd and /etc/shadow, which prevents them from being able to log in to the device.

Messages similar to the following may be seen in /var/log/secure when those users attempt to log in to the BIG-IP device.

   "User 'exampleuser' (fallback: false) - not authenticated: User not known to the underlying authentication module"

Conditions:
- A third (or subsequent) BIG-IP device is added to an existing sync group.
- The config-sync operation fails to load the new configuration, for example, because it is performed in the wrong direction, and the new empty device tries to overwrite and remove configuration from the existing ones, which is blocked by non-shared object references.

Impact:
Locally defined users on the receiving BIG-IP device are removed.

Workaround:
Log in as admin or root, and manually reset the passwords on the affected local user accounts. This will repopulate the users into the unix passwd and shadow files.


1144845-4 : GARPs from a newly active unit may be bridged for a brief time while the peer chassis transitions to standby

Links to More Info: BT1144845

Component: Local Traffic Manager

Symptoms:
When a VIPRION chassis goes into Standby there is a brief period of time in which all the blades transition. If GARPs are sent from the newly Active device during this time, they may be bridged.

Conditions:
VIPRION, multiple blades, vlan-groups.

Impact:
Switches / routers may have incorrect ARP information after a failover.

Workaround:
Use proxy exclude list to exclude all virtual addresses.


1144729-4 : PVA stats may be incorrect when PVA offloaded flows have their nexthops changed to a different VLAN

Links to More Info: BT1144729

Component: TMOS

Symptoms:
The PVA stats and corresponding service graph may be inaccurate if there are multiple routes to a destination and those routes are on different VLANS.

Conditions:
Multiple routes to a destination that exist on different VLANS. A flow that changes from one route to another.

Impact:
PVA stats or service graph may show significantly higher numbers than expected.

Workaround:
Disable PVA acceleration for the affected traffic.

Create LTM profile fastl4 and other-pva-offload-direction server-to-client-only.


1144497-2 : Base64 encoded metachars are not detected on HTTP headers

Component: Application Security Manager

Symptoms:
Base64 encoded illegal metachars are not detected.

Conditions:
No specific condition.

Impact:
False negative, illegal characters are not detected and request not blocked.

Workaround:
None


1144477-1 : IKE_SA_INIT uses src port 500 and dst port 4500 after IKE SA deleted

Links to More Info: BT1144477

Component: TMOS

Symptoms:
The new IPsec tunnel IKE INIT exchange source port is 500, and the destination port is 4500, but the destination port should be 500.

Conditions:
This issue is observed after deleting IKE SA from tmsh.

Impact:
Interoperability issue, tunnel will not get established with other devices.

Workaround:
None


1144417 : DoS WL allowed in BIG-IP version 16.1.x if it was configured in a previous version 15.1.x

Links to More Info: BT1144417

Component: Advanced Firewall Manager

Symptoms:
BIG-IP is allowing DOS WL is version 16.1.x when it is upgraded from version 15.1.x with existing configuration.

Conditions:
- Upgrade BIG-IP from version 15.1.x.

Impact:
BIG-IP adds WL in version 16.1.x.

Workaround:
Before upgrading to BIG-IP version 16.1.x, delete the WL configuration in version 15.1.x.


1144353 : After creating a "Dynamic Exclude Address Spaces" or "Dynamic LAN Address Spaces" from inside a Network Access List object fails to redirect back to Network Access List object page

Links to More Info: BT1144353

Component: Access Policy Manager

Symptoms:
After creating a "Dynamic Exclude Address Spaces" or "Dynamic LAN Address Spaces" the error "Major problem with Linked Adds, look at log file" is displayed on the page instead of redirecting back to the Network Access List object page.

Conditions:
Should navigate to Address Space creation page using the "+" button beside "Dynamic Exclude Address Spaces" or "Dynamic LAN Address Spaces" fields in the Network Access List object page.

Impact:
NA

Workaround:
Create a "Dynamic Exclude Address Spaces" or "Dynamic LAN Address Spaces" directly from the Access menu (Access ›› Connectivity / VPN : Network Access (VPN) : Address Spaces)
and then select it in the Network Access list object page.


1144329-4 : Traffic Intel does not classify Microsoft app properly

Links to More Info: BT1144329

Component: Traffic Classification Engine

Symptoms:
Some of the Microsoft teams based URLs are marked uncategorized or categorized as SSL and http2 by traffic intelligence categorization.

Conditions:
Geolocation based traffic not classified.

Impact:
Incorrect classification of Microsoft application.

Workaround:
None


1144117-3 : "More data required" error when using the 'HTTP::payload' and 'HTTP::payload length' commands

Links to More Info: BT1144117

Component: Local Traffic Manager

Symptoms:
The "More data required" TCL error may occur and the connection may be terminated prematurely when using the 'HTTP::payload' or 'HTTP::payload length' commands.

Conditions:
Using the 'HTTP::payload' or 'HTTP::payload length' TCL commands.

Impact:
Some HTTP transactions might fail.

Workaround:
Do not use the 'HTTP::payload' or 'HTTP::payload length' TCL commands.


1143833-2 : ILX (iRules LX) may corrupt tmstat (profile statistics) memory

Links to More Info: BT1143833

Component: Local Traffic Manager

Symptoms:
iRulesLX do not show statistics after any changes made on the workspace and reload the plugin.

Conditions:
-- Using iRules LX

Impact:
iRulesLX do not show statistics after any changes made on the workspace and reload the plugin.

Workaround:
None


1142445-4 : Multicast handling on wildcard virtual servers leads to TMM memory leak

Links to More Info: BT1142445

Component: TMOS

Symptoms:
Multicast handling on wildcard virtual servers leads to TMM memory leak.

Conditions:
- Multicast license
- Multicast is enabled on a route-domain (ip multicast-routing)
- Wildcard virtual server matching multicast address space.

Impact:
TMM memory usage increasing over time.

Workaround:
None.


1142225-2 : Regular and In-TMM HTTPS monitors advertise different cipher suites with SSL profile is set to None

Links to More Info: BT1142225

Component: Local Traffic Manager

Symptoms:
The HTTPS monitors advertise different cipher suites if the SSL profile setting is set to None, irrespective of whether the in-TMM monitoring is enabled.

Conditions:
The Https monitor(s) are set with the default SSL profile of "None".

Impact:
Pool members may be marked down when switching between regular and in-TMM monitoring due to differing cipher suites.

Workaround:
Assign an SSL profile to HTTPS monitors.


1142153-2 : DNS Resource Records for Wide IPs are potentially misleading when creating or deleting a large number of Wide IPs

Links to More Info: BT1142153

Component: Global Traffic Manager (DNS)

Symptoms:
BIND records do not match configured Wide IPs and pools.

Conditions:
If the BIG-IP is a member of a DNS/GTM sync-group and "synchronize-zone-files" is enabled.

Impact:
Resources that are down in GTM do not receive appropriate answers from BIND, and clutter builds up in BIND database over time.

Workaround:
None


1141853-2 : SIP MRF ALG can lead to a TMM core

Links to More Info: BT1141853

Component: Service Provider

Symptoms:
SIP MRF ALG can lead to a TMM core

Conditions:
SIP MRF ALG in use

Impact:
TMM core

Workaround:
None


1141845-4 : RULE_INIT with a call that contains an extra colon character (:) will crash BIG-IP.

Links to More Info: BT1141845

Component: Local Traffic Manager

Symptoms:
If a RULE_INIT contains an extra colon character (:)
when RULE_INIT {
    catch { call sv::hsl:open "/Common/publisher-syslog_server_pool" }
}
It will crash instead of reporting the error.
In this example, the extra : before 'open' is an error. Instead of logging the error, it crashes the process.

Conditions:
RULE_INIT contains more than 2 colon characters (:) on a rule.

Impact:
The tmm process crashes.

Workaround:
Avoid creating a RULE_INIT containing a third colon character(:).


1141665-2 : Significant slowness in policy creation following Threat Campaign LU installation

Component: Application Security Manager

Symptoms:
Significant and consistent slowness in policy creation in Layered Policies suites in BVT (asmdp).

Conditions:
Slowness was triggered by installing a Threat Campaign LU.

Impact:
Slow policy creation when we have Threat Campaign LU.

Workaround:
None


1141213-2 : Peer is aborting the connection when PEM client runs diameter traffic over SCTP

Links to More Info: BT1141213

Component: TMOS

Symptoms:
PEM is initiating connection with successful CER/CEA. But, every time the connection gets aborted by the peer and a new connection is opened when diameter traffic is being sent from PEM client over SCTP.

Conditions:
Configure PEM as Gx diameter endpoint and let PEM to connect with MRF Diameter VS.

Impact:
MRF is resetting the PEM connection.

Workaround:
None


1138101-2 : Tunnel connections might not come up when using pool routes

Links to More Info: BT1138101

Component: Local Traffic Manager

Symptoms:
When using a pool route with service-down action set to drop or reset, tunnel flows might not work properly after pool route gateway goes down and comes up.

Conditions:
- Tunnel flow using a pool route for nexthop resolution.
- Pool route with service-action-down set to drop or reset.
- Pool is marked down and then up.

Impact:
Traffic no longer goes through tunnel.

Workaround:
Do not use service-action-down feature.


1137993-2 : Violation is not triggered on specific configuration

Links to More Info: BT1137993

Component: Application Security Manager

Symptoms:
The HTTP compliance violation is not triggered for the unparsable requests due to a specific scenario.

Conditions:
A microservice is configured in the security policy.

Impact:
Specific violation is not triggered. A possible false negative.

Workaround:
It is possible to do an irule workaround that checks the length of the URL and issues a custom violation.


1137717-2 : There are no dynconfd logs during early initialization

Links to More Info: BT1137717

Component: Local Traffic Manager

Symptoms:
Regardless of the log level set, the initial dynconfd log entries are not displayed.
Setting the dynconfd log level (through DB variable or /service/dynconfd/debug touch file) will not catch the early logging during startup.

Conditions:
This occurs when using FQDN nodes or pool members on affected BIG-IP versions.

Impact:
Missing some informational logging from dynconfd during startup.

Workaround:
None


1137521 : TLSv1.3 connections dropped when SSL Persistence enabled

Links to More Info: BT1137521

Component: Local Traffic Manager

Symptoms:
The virtual server processing the TLSv1.3 traffic having SSL Persistence profile enabled may see the connections dropped.

Conditions:
- TLSv1.3 is enabled on ClientSSL profile used on virtual server.
- SSL Persistence Mode is enabled on the virtual server.

Impact:
Traffic may have impact as the optimizations due to SSL Persistence may not work for TLSv1.3

Workaround:
Do not enable SSL Persistence with TLSv1.3 on the affected versions.


1137485-2 : Gtmd produces excessive logging and may also crash (SIGSEGV) repeatedly

Links to More Info: BT1137485

Component: Global Traffic Manager (DNS)

Symptoms:
1. --An excessive number log lines are seen in /var/log/gtm, which indicate a state change even though a state change has not occurred (eg, blue --> blue, green --> green), for example:

/var/log/gtm:

   alert gtmd[13612]: 011a6006:1: SNMP_TRAP: virtual server ltm1 (ip:port=192.168.0.1:0) (Server /Common/vs1) state change blue --> blue ()

2. If, on affected version, the GTM configuration contains virtual servers with a depends-on clause, the gtmd process can exit abnormally ("crash") and produce a gtmd core file. The process restarts immediately automatically, but may then exit and restart again every few seconds or minutes, and continues to do this indefinitely.

In /var/log/user.log, many messages similar to the following may be seen

   notice logger[26789]: Started writing core file: /var/core/gtmd.bld0.0.6.core.gz for PID 26739
   notice logger[26800]: Finished writing 35032053 bytes for core file: /var/core/gtmd.bld0.0.6.core.gz for PID 26739

Conditions:
- For the excessive logging issue: A GTM server object exists with one or more virtual servers configured under it

 - For the gtmd crashing issue: One or more GTM server object's virtual-servers has a depends-on clause referring to another virtual-server.

Impact:
- Flood of SNMP trap logs are seen
- gtmd process exits abnormally, bringing down iquery connection and potentially impacting GTM monitoring


1137269-4 : MCPD fails to reply if a request is proxied to another daemon and the connection to that daemon closes

Links to More Info: BT1137269

Component: TMOS

Symptoms:
MCPD does not reply to the request if the publisher's connection closes or fails. In this case, when bcm56xxd
is restarted, the perceivable signs of failure are:
- The snmpwalk failing with a timeout and
- The "MCPD query response exceeding" log messages.

Conditions:
1) Configure SNMP on the BIG-IP to run snmpwalk locally on the BIG-IP.
2) From the first session on the BIG-IP, run a snmpwalk in the while loop.
    
while true;do date; snmpwalk -v2c -c public 127.0.0.1 sysDot1dbaseStat;sleep 2;done
Sample output:
Sat Aug 21 00:57:23 PDT 2021
F5-BIGIP-SYSTEM-MIB::sysDot1dbaseStatResetStats.0 = INTEGER: 0
F5-BIGIP-SYSTEM-MIB::sysDot1dbaseStatMacAddr.0 = STRING: 0:23:e9:e3:8b:41
F5-BIGIP-SYSTEM-MIB::sysDot1dbaseStatNumPorts.0 = INTEGER: 12
F5-BIGIP-SYSTEM-MIB::sysDot1dbaseStatType.0 = INTEGER: transparentonly(2)

3) From a second session on the BIG-IP restart bcm56xxd

bigstart restart bcm56xxd

4) The snmpwalk will continually report the following:

Timeout: No Response from 127.0.0.1

      And snmpd will continually log "MCPD query response exceeding" every 30 seconds in /var/log/ltm.

Impact:
SNMP stopped responding to queries after upgrade.

Workaround:
Restart SNMP.


1137217-2 : DNS profile fails to set TC flag for responses containing RRSIG algorithm 13

Links to More Info: BT1137217

Component: Global Traffic Manager (DNS)

Symptoms:
DNS express sends a malformed response when UDP size limit is set to 512.

Conditions:
The UDP size limit is set to exactly 512 and a zone that is signed with algorithm 13 (ECDSA Curve P-256 with SHA-256), the DNS express responds with a malformed packet.

Impact:
Malformed DNS express responses is received when UDP size limit set to exactly 512 and a zone is signed with algorithm 13.

Workaround:
None


1137133-2 : Stats rate is showing incorrect data for broadcast, multicast and arp flood vectors

Component: Advanced Firewall Manager

Symptoms:
At tenant side stats_rate is almost double.

Conditions:
Appliance has two ATSE's.
AFM is enabled and licensed and broadcast or multicast packets are sent.

Impact:
Stats_rate is shown as double than sent traffic rate.
If vector is configured and traffic is passing with higher rate than mitigation value, stats_rate and int_drops_rate will be shown as double data rate.

Workaround:
None


1136921-4 : BGP might delay route updates after failover

Links to More Info: BT1136921

Component: TMOS

Symptoms:
The BGP might delay route updates after failover.

Conditions:
- The BGP configured on an High Availability (HA) pair of BIG-IP devices.
- The BGP redistributing kernel routes.
- Failover occurs.

Impact:
New active unit might delay route advertisement up to 15 sec.
New standby unit might delay route withdrawal up to 15 sec.

Workaround:
None


1136917-1 : TMM crashed when dos-profile (with BDOS and White-list enabled) disassociated from Virtual Server.

Component: Advanced Firewall Manager

Symptoms:
This happens only if the specific sequence of events occur. The reason for TMM crash is accessing a Dangling Pointer memory.

Conditions:
This issue only happens if the following sequence of events occur:
1) Attach dos-profile to a Virtual Server (VS) (The dos-profile should be enabled with White-list and BDOS).
2) There should be active connections on the VS.
3) Disable BDOS from the dos-profile while it is still attached to the VS.
4) Detach the dos-profile from the VS.
5) While processing the incoming traffic, TMM will crash.

Impact:
TMM Cores.

Workaround:
This only happens if the sequence mentioned in Conditions are followed.

Modify the profile and add to the virtual server to avoid TMM crash.


1136905-1 : Request for Portal Access Hosted Content are RST with "No available SNAT addr"

Links to More Info: BT1136905

Component: Access Policy Manager

Symptoms:
RST with the following message in /var/log/apm:
- No available SNAT addr

Conditions:
- Portal Access with Hosted-Content.

Impact:
Unable to access hosted-content resources.

Workaround:
Use the following command:
- tmsh modify sys db ipv6.enabled value false


1136837-4 : TMM crash in BFD code due to incorrect timer initialization

Links to More Info: BT1136837

Component: TMOS

Symptoms:
TMM crashes in BFD code due to incorrect timer initialization.

Conditions:
- BFD configured
- Multi-bladed system
- One of blades experiences failure.

Impact:
Crash or core.

Workaround:
None.


1136833-2 : Unparseable request content subviolation override cannot be configured on microservices

Links to More Info: BT1136833

Component: Application Security Manager

Symptoms:
A configuration option is missing for the unparseable request content subviolation override.

Conditions:
The option is missing in the UI and REST.

Impact:
It is not possible to configure an override for this subviolation on a microservice.

Workaround:
An iRule can be used to mitigate this condition. The specific iRule will be different according to the use case, the following is an example (psaudo code):

when ASM_REQUEST_DONE
{
       if {[ASM::microservice] eq "/foo/*a/"}
       {
           if { [HTTP::uri] length > X}
           #trigger ASM custom violation
}


1136781-2 : Incorrect parsing of 'bfd notification' CLI in IMI Shell (imish)

Links to More Info: BT1136781

Component: TMOS

Symptoms:
-- Cannot load a file containing 'bfd notifications enable'.
-- After restarting the Advanced Shell services or rebooting, the 'bfd notifications enable' command is missing in the show running-config.

Conditions:
-- In imish, configure "bfd notification enable".
-- Reboot or TMSH restart sys service tmrouted.
-- The "bfd notification enable" is not present in the show running-config.

Impact:
Unable to restore or survive the bfd notification CLI.

Workaround:
None


1136429-4 : Closing of unrelated MCPD connection causes an errant reply to an in-progress transaction or request group

Links to More Info: BT1136429

Component: TMOS

Symptoms:
MCPD can send an unexpected (another request group) result response message to a current processing request group in the middle of a transaction

Conditions:
While MCPD processing multiple request groups.

Impact:
MCPD closes the connection of the current request group and
subscriber of that particular request group never get requested data.

Workaround:
Restart the subscriber daemon.


1135393-1 : The pfmand support is not available on i15820-DF (D120)

Links to More Info: BT1135393

Component: TMOS

Symptoms:
The vCMP host is not running pfmand, while the vCMP guest is runiing. The guests logs the following error:
"pfmand[5334]: 01660005:4: No connection to hypervisor."

Conditions:
On vCMP guest, it is running the pfmand service and giving following error logs:
"pfmand[5334]: 01660005:4: No connection to hypervisor."

Impact:
No functional impact as device is processing the crypto and compression traffic to Nitrox5 device, but pfmand will not be able to monitor Nitrox5 device.

Workaround:
None


1135313-4 : Pool member current connection counts are incremented and not decremented

Links to More Info: BT1135313

Component: Local Traffic Manager

Symptoms:
With a certain configuration the connection counts on a gateway pool may increment and not be decremented.

Conditions:
- A gateway pool with more than one member.
- Autolasthop disabled.
- A pool monitor with a TCP monitor where the pool member responds to the TCP handshake with data. Common services that do this are SSH, SMTP, and FTP.

Impact:
The connection counts are inflated.

Workaround:
- Configure autolasthop.
- Configure a receive string on the TCP monitor.


1135073-3 : IPS signature update webUI warning message "An active subscription is required to access certain inspections" is always enabled

Component: Protocol Inspection

Symptoms:
Following warning message is displayed on BIG-IP webUI in Security ›› Protocol Security: Inspection Updates:

"An active subscription is required to access certain inspections"

Conditions:
If the BIG-IP has AFM and IPS subscription license, then this warning message on webUI should not be displayed.

Impact:
There is no impact if AFM and IPS subscription license are installed on BIG-IP. All the IPS signatures and compliances will work as usual.

Workaround:
None


1134509-4 : TMM crash in BFD code when peers from ipv4 and ipv6 families are in use.

Links to More Info: BT1134509

Component: TMOS

Symptoms:
TMM crashes in BFD code when peers from ipv4 and ipv6 families are in use.

Conditions:
- BFD configured
- Mixed IPv4 and IPv6 peers.

Impact:
Crash or core

Workaround:
None.


1134441-2 : Inactive policy synced to peer results ASM removed from virtual server only for sync-only DG

Links to More Info: BT1134441

Component: Application Security Manager

Symptoms:
An ASM policy is suddenly detached from a virtual server and deactivated.

Conditions:
-- sync-only device group.
-- ASM sync enabled.
-- A policy is used on device ASM-A (attached to virtual server/device group).
-- The same policy is not used on device ASM-B (not attached to virtual server/device group).

Impact:
Inactive policy is synced to the peer, resulting in ASM being unassigned from the Virtual Server.

Workaround:
To prevent Policy Sweeper from deactivating any ASM policy, create a non-functioning device group and attach the unused ASM policies to that device group.


1134301-3 : IPsec interface mode may stop sending packets over tunnel after configuration update

Links to More Info: BT1134301

Component: TMOS

Symptoms:
An interface mode IPsec policy handles traffic through a route-domain to send over the IPsec tunnel. When the traffic-selector is updated, the static default route for the route-domain no longer works. Even if the tunnel is functional, traffic is not sent over it.

Conditions:
- IPsec tunnel with ipsec-policy in interface mode.
- Static routes pointing to the IPsec interface.
- Tunnel configuration updated.

Other unknown conditions could trigger the behavior, but updating the tunnel configuration is a confirmed condition.

Impact:
The tunnel is functional but the BIG-IP does not send packets into it. No ESP packets related to that tunnel will be seen leaving the BIG-IP.

Workaround:
There are two similar workaround options for when the issue is observed:

Option 1: Delete the route to the remote network that points to the IPsec interface and create the route again.

Option 2: Alternatively, leave the existing route in place and create a similar specific route that points to the same IPsec interface. The issue should be immediately resolved and so the new route can be immediately deleted.


1134257-2 : TMM cores when pingaccess profile is modified multiple times and configuration is loaded

Links to More Info: BT1134257

Component: Local Traffic Manager

Symptoms:
TMM cores.

Conditions:
- The APM pingaccess profile is configured.
- Before configuration load, modify pingaccess profile multiple times.

Impact:
TMM cores.

Workaround:
None


1134057-4 : BGP routes not advertised after graceful restart

Links to More Info: BT1134057

Component: TMOS

Symptoms:
The BGP routes not advertised after a graceful restart.

Conditions:
The BGP with graceful restart configured.

Impact:
The BGP routes not advertised after graceful restart.

Workaround:
None


1133881-2 : Errors in attaching port lists to virtual server when TMC is used with same sources

Links to More Info: BT1133881

Component: Local Traffic Manager

Symptoms:
When creating a virtual server that has identical traffic matching criteria with another virtual server, but uses a source address defined same as configured in TMC object, and when we try to attach the port-list it fails, with an error similar to the following:

01b90011:3: Virtual Server /Common/vs2-443's Traffic Matching Criteria /Common/vs2-443_VS_TMC_OBJ illegally shares destination address, source address, service port, and ip-protocol with Virtual Server /Common/vs1-443 destination address, source address, service port.

Conditions:
- Port lists are used.
- The first virtual server uses a wildcard source, for example, 0.0.0.0/0.
- The second virtual server uses an identical destination, protocol, and port, with the same source address configured in TMC object.

Impact:
Inability to utilize 'port lists' to configure the virtual server.

Workaround:
None


1133625-2 : The HTTP2 protocol is not working when SSL persistence and session ticket are enabled

Links to More Info: BT1133625

Component: Local Traffic Manager

Symptoms:
Connection gets dropped when SSL persistence is enabled with session ticket and HTTP2 protocol.

Conditions:
When SSL persistence is enabled with session ticket and HTTP2 protocol.

Impact:
Connection will get dropped.

Workaround:
-- Disable SSL persistence OR
-- Disable session ticket.


1133557-2 : Identifying DNS server BIG-IP is querying to resolve LTM node FQDN name

Links to More Info: BT1133557

Component: Local Traffic Manager

Symptoms:
When the BIG-IP (dynconfd process) is querying a DNS server, dynconfd log messages do not identify which server it is sending the request to. When more than one DNS server is used and there is a problem communicating with one of them, it might be difficult for system admin to identify the problematic DNS server.

Conditions:
This occurs when using FQDN nodes or pool members on affected BIG-IP versions.

Impact:
There are no show commands or log displaying which DNS is currently being used to resolve LTM node using FQDN. Problems with communications between the BIG-IP and DNS server(s) may be more difficult to diagnose without this information.

Workaround:
You can confirm which DNS server is being queried by monitoring DNS query traffic between the BIG-IP and DNS server(s).


1133201-1 : Disabling a GTM pool member results in the same virtual server no longer being monitored in other pools

Links to More Info: BT1133201

Component: Global Traffic Manager (DNS)

Symptoms:
If you disable a GTM pool member in one of the pools, monitoring appears to be disabled for the members in the other pools.
Incorrect probe behavior when toggling or untoggling the monitor-disabled-objects GTM global setting.

Conditions:
- Same virtual server or monitor combination is used in multiple GTM pools.
- Disable the GTM pool member in one of the pool.

Impact:
Incorrect pool monitoring..

Workaround:
Enable the 'Monitor Disabled Objects' or, assign a different monitor to pools.


1132981-2 : Standby not persisting manually added session tracking records

Links to More Info: BT1132981

Component: Application Security Manager

Symptoms:
The Session tracking records, with Infinite Block-All period, have an expiration time on the Standby unit after sync.

Conditions:
ASM provisioned
Session Tracking enabled
session tracking records, with Infinite Block-All period, are added

Impact:
Infinite Session Tracking records being removed from standby ASMs.

Workaround:
Use auto-sync DG (instead of manual sync).

After changing the configuration on UI at Security->Application Security: Sessions and Logins: Session Tracking.

You must "Apply Policy" and wait for the DG status to become In-Sync before adding new data-points on UI at Security->Reporting: Application: Session Tracking Status.


1132957-1 : Modifying IPsec tunnels tunnel object may result in TMM core

Links to More Info: BT1132957

Component: TMOS

Symptoms:
Changing the configuration of an IPsec interface mode tunnel may result in a TMM core.

Conditions:
- IPsec with ipsec-policy in interface mode.
- Configuration is changed for that tunnel.

Impact:
Traffic disrupted while TMM restarts.

Workaround:
Before reconfiguring an IPsec interface mode tunnel, disable the ike-peer associated with the tunnel.


1132949-4 : GUI reported error when changing password after mgmt port was changed

Links to More Info: BT1132949

Component: TMOS

Symptoms:
GUI reports an error, but the password can be changed successfully anyway:

An error has occurred while trying to process your request.

Conditions:
This issue is seen when an SSL port change happens, followed by password change for a given user.

Impact:
The BIG-IP system is unable to provide the following functionality:

1. Gossip Framework : REST high availability (HA) sync framework will not work.
2. Licensing via BIG-IQ
3. selfLinks will be wrong
4. iAppLx, SSL Orchestrator, Access Guided Configuration, AS3 will be affected as these modules depends on Gossip

Workaround:
This issue is seen only when the SSL port is other than 443 (which is default SSL port).

To work around this, keep 443 as SSL port.


1132925-3 : Bot defense does not work with DNS Resolvers configured under non-zero route domains

Links to More Info: BT1132925

Component: Application Security Manager

Symptoms:
When a DNS Resolver is configured under a non-zero route domain, the bot defense does not use the DNS resolver to perform DNS queries, resulting in some bots not being detected.

Conditions:
DNS Resolver is configured under non-zero route domain.

Impact:
Some bots are not detected by bot defense mechanism.

Workaround:
Configure DNS Resolver under route domain 0.


1132765-4 : Virtual server matching might fail in rare cases when using virtual server chaining.

Links to More Info: BT1132765

Component: Local Traffic Manager

Symptoms:
When using virtual server chaining (for example iRule 'virtual' command sending traffic to another virtual server explicitly), a small percentage of packets might be dropped.

Conditions:
- Virtual server chaining.
- virtual servers have the vlan_enabled feature configured.
- DatagramLB or idle-timeout = 0 configured on protocol profile.
- High packet rate of incoming traffic.

Impact:
Some packets fail to match a virtual server and get dropped.

Workaround:
- Remove vlan_enabled feature
- OR remove datagramLB/set idle-timoeut > 0 on protocol profile.


1132741-2 : Tmm core when html parser scans endless html tag of size more then 50MB

Links to More Info: BT1132741

Component: Application Security Manager

Symptoms:
Tmm core, clock advanced by X ticks printed

Conditions:
- Dos Application or Bot defense profile assigned to a virtual server
- Single Page Application or Validate After access.
- 50MB response with huge html tag length.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Exclude html parser for url in question.
tmsh modify sys db dosl7.parse_html_excluded_urls value <url>


1132705-3 : Failed on insert entry to DCC.ACCOUNT_LOGIN_OBJECT_ATTRIBUTES

Links to More Info: BT1132705

Component: Application Security Manager

Symptoms:
When importing two policies that have the same url object configured, adding the url parameter to one on of the policies causes apply policy to fail.

Conditions:
1. Both policies use the same url parameter.
2. Type of parameters are different (one can be http and the other can be https for example).

Impact:
Apply policy fails.

Workaround:
Change the name of one of the policies.


1132449-2 : Incomplete or missing IPv6 IPI database results to connection reset and/or high TMM CPU usage

Links to More Info: BT1132449

Component: Advanced Firewall Manager

Symptoms:
Following IPv4 database load message is present in /var/log/ltm:
015c0010:5: Initial load of IPv4 Reputation database has been completed

Note the absence of:

015c0010:5: Initial load of IPv6 Reputation database has been completed

Some scenarios would result in elevated TMM CPU utilization, for example, when using IPI in global policy.

Conditions:
Failure to download IPv6 database from localdb-ipv6-daily.brightcloud.com.

Impact:
Any of the following:

- TCL error results when IPI is used in an iRule resulting in connection being reset.

- When using IPI in global policy, increased TMM CPU utilization may occur which leads to idle enforcer being triggered, TMM clock advanced messages appearing in LTM logs, or TMM restarting without core when MCPD is unable to communicate with TMM.

Workaround:
Ensure that BIG-IP is able to communicate with BrightCloud servers, including localdb-ipv6-daily.brightcloud.com. See K03011490.


1132405-4 : TMM does not process BFD echo pkts with src.addr == dst.addr

Links to More Info: BT1132405

Component: Local Traffic Manager

Symptoms:
TMM does not process BFD echo pkts with src.addr == dst.addr.

Conditions:
- TMM does not process BFD echo pkts with src.addr == dst.addr.

Impact:
TMM does not process BFD echo pkts with src.addr == dst.addr.

Workaround:
None


1128689-2 : Performance improvement in signature engine

Links to More Info: BT1128689

Component: Application Security Manager

Symptoms:
The signature engine in BD uses more CPU cycles than it actually needs to complete the task.

Conditions:
ASM provisioned and in use

Impact:
Slower system performance
High CPU utilization with BD

Workaround:
For header-based signatures that appear on the top in ACY_PERF, the header exclusions can be added only on explicit headers. This should decrease the CPU usage.


1128629 : Neurond crash observed during live install through test script

Links to More Info: BT1128629

Component: TMOS

Symptoms:
Neurond core is observed during live install followed by FPGA firmware upgrade through the test script.

Conditions:
Live install through the test script

Impact:
No functional impact

Workaround:
None


1128505-2 : HTTP::disable/enable sequence before first request may result in premature HUDEVT_ACCEPTED to proxy

Links to More Info: BT1128505

Component: Local Traffic Manager

Symptoms:
The ORBIT framework added HUDEVT_ACCEPTED handling through hud_orbit_accepted_handling. This allows ORBIT to move releasing HUDEVT_ACCEPTED from the filter to ORBIT, HTTP adopted this new feature.

When HTTP is disabled, HUDEVT_ACCEPTED handling is explicitly disabled by HTTP when going into passthru, subsequent enabling of HTTP does not restore this handling. If this sequence happens prior to the first HTTP request, then HUDEVT_ACCEPTED is released prematurely up the chain, thus the server-side connection may be established before the first request is processed. Attempts to manipulate the LB criteria at that point may fail due to the criteria being locked, this may result in the connection being RST with an "Address in use" reset cause.

Conditions:
-- HTTP Virtual server
-- HTTP::disable is called from CLIENT_ACCEPTED and the subsequently re-enabled before the first request arrives at HTTP in CLIENTSSL_HANDSHAKE

Impact:
Connection is reset with "Address in use" reset cause.

Workaround:
None


1128429-5 : Rebooting one or more blades at different times may cause traffic imbalance results High CPU

Links to More Info: BT1128429

Component: Carrier-Grade NAT

Symptoms:
One or more TMMs are consuming more CPU cycles than the other TMMs. The increased CPU usage is caused by a significant number of internal TMM traffic redirections.

Conditions:
- LSN pools enabled.
- The sp-dag configured on the client-side and server-side VLANs (cmp-hash src-ip and cmp-hash dst-ip respectively).

Impact:
Increased TMM CPU usage on one or more TMMs.

Workaround:
- Set up an High Availability (HA) pair of VIPRIONs and make an active VIPRION cluster standby before doing any operation that involves the rebooting, insertion, or removal of one or more blades.

Or if the VIPRION is a stand-alone cluster:

- Stop all external traffic to the VIPRION before rebooting, inserting, or removing one or more blades.

- Restart or reboot all the blades at the same time from the primary, using the following "clsh" command:
"clsh reboot volume <NEW_VOLUME>" or "clsh bigstart restart".


1128405-3 : DNS overall Request/Second counter can be inaccurate

Links to More Info: BT1128405

Component: Global Traffic Manager (DNS)

Symptoms:
In the output of "tmsh show ltm profile dns" (which shows overall stats for all DNS profiles) can indicate an inaccurate value for the "Request/Second" counter.

The counters for individual DNS profiles will have accurate values.

Conditions:
A DNS profile is associated with a virtual server, and then later removed (or switched to use another DNS profile).

Impact:
The overall view showing statistics for DNS Requests/Second is inaccurate.

Workaround:
Reset the profile stats, although this will only be effective until the next time a DNS profile is removed from a virtual server.


1128169-1 : TMM core when IPsec tunnel object is reconfigured

Links to More Info: BT1128169

Component: TMOS

Symptoms:
TMM may core when a "tunnel tunnels" object related to an IPsec interface is reconfigured.

For example, a command that changes the IP address of the object may lead to a core:

# tmsh modify net tunnels tunnel my-ipsec-tunnel remote-address 1.2.3.4

Conditions:
-- IPsec IKEv1 or IKEv2.
-- Tunnel is in "interface" mode.
-- Tunnel object is reconfigured while the tunnel is up.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Ensure the tunnel is down before reconfiguring it.
-- Set the IKE-Peer config state to disabled.
-- Delete an established IKE SA and IPsec SA related to that peer.

For example:

  # tmsh modify net ipsec ike-peer <Name> state disabled
  # tmsh delete net ipsec ike-sa peer-ip <IP>
  # tmsh delete net ipsec ipsec-sa dst-addr <IP>

"Name" is the specific name given to the ike-peer config object.
"IP" is the address configured to use for the remote peer.

Then make the desired changes and enable the IKE-Peer.

  # tmsh modify net ipsec ike-peer <name> state enabled


1127881-2 : Deprecate sysClientsslStatFullyHwAcceleratedConns, sysClientsslStatPartiallyHwAcceleratedConns and sysClientsslStatNonHwAcceleratedConns

Links to More Info: BT1127881

Component: TMOS

Symptoms:
SSL Hardware Acceleration MIBs are still in use which are meant to be deprecated.

Conditions:
Run snmpwalk for these MIBS and it's active.

#snmpwalk -c public localhost -v2c F5-BIGIP-SYSTEM-MIB::sysClientsslStatFullyHwAcceleratedConns
F5-BIGIP-SYSTEM-MIB::sysClientsslStatFullyHwAcceleratedConns.0 = Counter64: 0

# snmpwalk -c public localhost -v2c F5-BIGIP-SYSTEM-MIB::sysClientsslStatPartiallyHwAcceleratedConns
F5-BIGIP-SYSTEM-MIB::sysClientsslStatPartiallyHwAcceleratedConns.0 = Counter64: 0

# snmpwalk -c public localhost -v2c F5-BIGIP-SYSTEM-MIB::sysClientsslStatNonHwAcceleratedConns
F5-BIGIP-SYSTEM-MIB::sysClientsslStatNonHwAcceleratedConns.0 = Counter64: 0

Impact:
SSL MIB not up-to-date

Workaround:
None


1127809-2 : Due to incorrect URI parsing, the system does not extract the expected domain name

Component: Application Security Manager

Symptoms:
The system will fail to send webhook requests to the server.

Conditions:
Add webhook to the policy and execute Apply policy on BIG-IP.

Impact:
Webhook requests will fail


1127805-2 : Server.crt containing "<" will cause frequent reconnects between local gtmd and big3d

Links to More Info: BT1127805

Component: Global Traffic Manager (DNS)

Symptoms:
Resources flap, frequent reconnects occur between the local gtmd and big3d.
Logs similar to this:
Jul 15 22:56:32 GSLB2 warning gtmd[11773]: 011ae023:4: XML parsing error not well-formed (invalid token) at line 483

Jul 15 05:36:54 GSLB2 notice gtmd[6917]: 011ae01a:5: SSL handshake complete to 10.10.10.10
Jul 15 05:37LB2 notice gtmd[6917]: 011ae01a:5: SSL handshake complete to 10.10.10.10
Jul 15 05:37:24 GSLB2 notice gtmd[6917]: 011ae01a:5: SSL handshake complete to 10.10.10.10
Jul 15 05:37:34 GSLB2 notice gtmd[6917]: 011ae01a:5: SSL handshake complete to 10.10.10.10

Conditions:
Server.crt containing "<"

Impact:
-- GTMs frequently leave/join the GTM sync group
-- Resources are marked up and down.

Workaround:
1. On each GTM, run bigip_add for all defined BIG-IP servers.
Or
2. Remove "<" from the server.crt file.


1127725 : Performance drop with the AES_CCM 128 cipher

Links to More Info: BT1127725

Component: Local Traffic Manager

Symptoms:
On all iSeries platforms with Intel Coleto Creek Crypto chip present for Hardware cryptos like i10800, i11800, i5800, i7000, and i15800 platforms, when AES_CCM 128 ciphers such as TLS_RSA_WITH_AES_128_CCM are used, there will be a performance drop when compared to previous releases.

Conditions:
When AES_CCM 128 algorithm is configured to use.

Impact:
A performance drop of up to 30% and an increase in CPU utilization occurs.

Workaround:
None


1127445-3 : Performance degradation after Bug ID 1019853

Links to More Info: BT1127445

Component: Performance

Symptoms:
Performance degradation is observed with BD in TPS in the versions that have the fix for Bug ID 1019853.

Conditions:
Versions that have the fix for Bug ID 1019853.

Impact:
Lower TPS performance with BD.

Workaround:
None


1127241-1 : AS3 tenants don't sync reliably in GTM sync groups.

Links to More Info: BT1127241

Component: Global Traffic Manager (DNS)

Symptoms:
GTM AS3 tenants do not sync across GTM sync groups when using AS3 declarations.

Conditions:
-- GTM sync group.
-- Remove tenant in GTM1.
-- Sync does not happen and the tenant remains in GTM2.

Impact:
GTM sync fails to sync the AS3 tenants.

Workaround:
None


1127169 : The BIG-IP can reboot due to failure to initialize the OpenSSL FIPS RNG

Links to More Info: BT1127169

Component: TMOS

Symptoms:
There is a possibility that BIG-IP can reboot due to failure to initialize the OpenSSL FIPS RNG.

Conditions:
- BIG-IP versions 16.1.3 and above.
- FIPS 140-3 license is installed on BIG-IP or it is a FullBoxFIPS device.
- Establish multiple SSL/TLS connections.

Impact:
The BIG-IP device reboots randomly.

Workaround:
None


1127117-1 : High Memory consumption for NAT translations of NAPT/PBA End Point Independent modes

Links to More Info: BT1127117

Component: Advanced Firewall Manager

Symptoms:
Memory consumption increases with the number of connections.

Conditions:
1. Configure LSN Pool in CGNAT with Persistence mode with Address and Port.

OR

1. Configure AFM NAT source Translations with DPAT and PBA with End Point Independent Mode

Impact:
Memory keeps increasing and eventually might reach 100% utilization.

Sample Comparison table below:

Connection_Count: 30M
Memory_Usage_on_14.x_Version: ~3GB
Memory_usage_on_15+_Version: ~30GB

Workaround:
-- Increase the available RAM if possible
OR
-- Reduce the connection timeout interval
OR
-- Try using other options like Address Pooling Paired Mode in PBA


1126841-3 : HTTP::enable can rarely cause cores

Links to More Info: BT1126841

Component: Local Traffic Manager

Symptoms:
The TMM crashes with seg fault.

Conditions:
- SSL profile used.
- The iRule that uses HTTP::enable.

Impact:
The TMM restarts causing traffic interruption.

Workaround:
None


1126805-3 : TMM CPU usage statistics may show a lower than expected value on Virtual Edition

Links to More Info: BT1126805

Component: TMOS

Symptoms:
The self-reported CPU statistics of TMM may show a usage value that is lower than the expected number. Some TMM threads may show lower CPU usage than others even if the threads are processing the same amount of traffic. When this issue occurs, a high number of idle polls are observed in the tmm_stat table for the affected TMM.

Conditions:
Virtual Edition

Impact:
TMM CPU stats may not be accurate.


1126409-3 : BD process crash

Component: Application Security Manager

Symptoms:
BD process restarts with a core file.

Conditions:
Unknown

Impact:
The unit goes offline for a short period of time.

Workaround:
None


1126329-2 : SSL Orchestrator with explicit proxy mode with proxy chaining enabled fails to send the CONNECT

Links to More Info: BT1126329

Component: Local Traffic Manager

Symptoms:
SSL Orchestrator sends a TLS client hello instead of the expected HTTP CONNECT, leading to a failure in the client environment after an upgrade.

Conditions:
SSL Orchestrator in explicit proxy mode with proxy chaining enabled

Impact:
The exit proxy gives an HTTP 5xx error in response to the unexpected TLS Client Hello.

Workaround:
None


1126181-2 : ZebOS "no log syslog" configuration is not surviving reboot

Links to More Info: BT1126181

Component: TMOS

Symptoms:
ZebOS "log syslog" or "no log syslog" are not surviving reboot according to the user performed operations. Always revert to default setting, which is enabled.

Conditions:
-- Under Configure no log syslog.
-- Perform reboot or upgrade.

Impact:
If syslog logging has been disabled using 'no log syslog', and then ZebOS is restarted. For example, by rebooting or upgrading the BIG-IP, syslog logging will revert to the default setting, which is enabled.

Workaround:
None


1126093 : DNSSEC Key creation failure with internal FIPS card.

Links to More Info: BT1126093

Component: Local Traffic Manager

Symptoms:
You are unable to create dnssec keys that use the internal FIPS HSM.

When this issue happens the following error messages appear in /var/log/gtm

Jul 20 04:37:47 localhost failed to read password encryption key from the file /shared/fips/nfbe0/pek.key_1, error 40000229
Jul 20 04:37:47 localhost.localdomain err gtmd[28729]: 011a0312:3: Failed to initiate session with FIPS card.
Jul 20 04:37:47 localhost.localdomain err gtmd[28729]: 011a0309:3: Failed to create new DNSSEC Key Generation /Common/abcd:1 due to HSM error.

Conditions:
-- Internal FIPS card present.
-- Clean installation from an installation ISO file.
-- DNSSKEY creation using internal FIPS card.

Impact:
DNSSEC deployments with internal FIPS HSMs are impacted.

Workaround:
Change the /shared/fips directory permissions.
Ex: chmod 700 /shared/fips


1125733-3 : Wrong server-side window scale used in hardware SYN cookie mode

Links to More Info: BT1125733

Component: TMOS

Symptoms:
Client enables Window Scale in the first SYN packet with a specific factor value, however the BIG-IP system disables Window Scale in its SYN/ACK response.

Instead, disabling the Window Scale TCP option in both peer BIG-IPs, TMM honors the Window Scale presented by the client in the first SYN, whereas client assumes Window Scale is disabled. This will cause BIG-IP to send data payload bytes exceeding the client's Windows Size.

Conditions:
Below conditions must be met in order to match this issue:

- Client and server enables timestamp TCP option.
- Client enables Window Scale TCP option.
- SYN Cookie HW is activated in BIG-IP.

Impact:
This can cause performance issues because some packets could need to be retransmitted.

In rare cases where client TCP stack is configured to abort connection when it receives window overflow the connection will be RST by client.

Workaround:
The preferred workaround is changing to Software SYN Cookie mode.


1125381-2 : Extraneous warnings recorded in when using only intermediate certificates

Links to More Info: BT1125381

Component: Local Traffic Manager

Symptoms:
When client authentication is enabled on the client SSL profile but the trusted-ca file includes only an intermediate certificate and no CA root cert to build the whole cert chain, although the TLS connection is made, as expected, there is an error message reported.

Conditions:
Trusted-ca includes only inter-cert and no root CA-cert
is configured.

Impact:
Although the TLS handshake succeeds without any issue and the connection is processed, as expected, a confusing warning is reported.

Workaround:
Because the connection is made, you can safely ignore this message.

Note: This issue does not occur if the root CA cert is also configured in the CA-cert bundle.


1125161-2 : Wideip fails to display or delete in the Link Controller GUI.

Links to More Info: BT1125161

Component: Global Traffic Manager (DNS)

Symptoms:
Attempting to display (i.e. click on) a WideIP in the Link Controller GUI returns an error similar to the following example:

General error: Error parsing value of "null" of type "gtm_qtype_t" in statement [SELECT SINGLE *, gtm_pool.name as pool_name FROM gtm_wideip, gtm_pool WHERE (name = '/Common/example.com' AND type = '1' AND pool_name = 'null' AND pool_type = 'null')]

Attempting to delete a Wideip in the Link Controller GUI returns an error similar to the following example (and the delete operation fails):

01020036:3: The requested Pool (A /Common/example.com) was not found.

Conditions:
-- Link Controller system.

-- The Wideip in question has no associated Pool. This is likely the result of improperly creating the Wideip via the tmsh utility, or upgrading the system from an earlier version which caused your configuration to be automatically fixed up (such as creating distinct A and AAAA Wideips from an earlier unique Wideip entry).

Impact:
The GUI cannot be used to display or delete the Wideip.

Workaround:
Link Controller, unlike GTM, does not expose the concept of Pools. Link Controller only exposes WideIPs and Virtual Servers. Pools exist, but are managed automatically by the system on your behalf.

If a WideIPs created using the GUI, the WideIP will be assigned a Pool of the same type and name automatically. This also happens if you initially decide to assign no Virtual Servers to the WideIP (and things work as intended in the BIG-IP GUI).

However, the tmsh utility is not aligned with this Link Controller requirement, and allows you to create WideIPs with no associated Pool.

If you have experienced this issue:

1) Deleted the affected WideIP using the tmsh utility.

2a) Going forward, use the GUI to define more Link Controller WideIPs.

2b) Alternatively, if you must use the tmsh utility to do so, ensure each WideIP you create is assigned an identically named Pool of the same type, even if initially you decide to place no Virtual Servers in the Pool. For example, define something like the following:

gtm pool a /Common/example.com { }
gtm wideip a /Common/example.com {
    pools {
        /Common/example.com {
            order 0
        }
    }
}


1124793-1 : Space inserted for variable assigned in a custom expression in the GUI

Links to More Info: BT1124793

Component: Access Policy Manager

Symptoms:
A space character is inserted in a Custom Expression in UI

Conditions:
While creating a Custom expression in Variable Assign

Impact:
In some cases the space in the custom expression is propagating to bigip.conf and causing issues due to the extra space.

Workaround:
None


1124733-1 : Unnecessary internal traffic is observed on the internal tmm_bp vlan

Component: TMOS

Symptoms:
Unnecessary internal traffic can be observed on the internal tmm_bp vlan. It is a UDP broadcast on 62965 port.

Conditions:
Always

Impact:
Unnecessary traffic that does not disrupt normal operation.

Workaround:
None


1124217-1 : Big3d cores on CTCPSocket::TCPReceive and connector

Links to More Info: BT1124217

Component: Global Traffic Manager (DNS)

Symptoms:
Big3d crashes.

Conditions:
Big3d keeps restarting and coring on gtm with a large quantity of monitors configured.

Impact:
Segmentation fault and big3d restarts.

Workaround:
None


1124209-3 : Duplicate key objects when renewing certificate using pkcs12 bundle

Links to More Info: BT1124209

Component: TMOS

Symptoms:
Duplicate key objects are getting created while renewing the certificate using the pkcs12 bundle command.

Conditions:
When the certificate and key pair is present at the device and the pkcs12 command is executed to renew it.

Impact:
1) If the certificate and key pair is attached to the profile then certificate renewal is failing.

2) Duplicate key objects are getting created.

Workaround:
Delete the existing cert and key pair, and then execute the pkcs12 bundle command.


1124085-4 : iRules command [info hostname] does not reflect modified hostname

Links to More Info: BT1124085

Component: Local Traffic Manager

Symptoms:
Result from [info hostname] iRules command does not change after modifying system hostname.

Conditions:
- iRules [info hostname] command is being used.
- System hostname is modified.

Impact:
iRules command [info hostname] might reflect incorrect/old hostname

Workaround:
Use $static::tcl_platform(machine) insted of [info hostname]


1123885-2 : A specific type of software installation may fail to carry forward the management port's default gateway.

Links to More Info: BT1123885

Component: TMOS

Symptoms:
After performing a specific type of software installation, the unit returns on-line without the management port's default gateway.

Conditions:
-- A software installation that does not carry forward the entirety of the BIG-IP system's configuration is performed. For example, this is achieved by running "image2disk --format=volumes <...>", or by using the live-install subsystem after disabling the liveinstall.saveconfig and liveinstall.moveconfig db keys. This type of installation, however, does carry forward the management port's configuration (IP address, subnet mask, and default gateway).

-- In addition to the default gateway, the management port is configured with additional static routes (for example, to a log server, dns server, etc.).

-- When mcpd is queried for the management routes, the default gateway is not the first entry in mcpd's reply (this is something outside of your control that entirely depends on the name of the objects and how the config was loaded).

Impact:
On Virtual Edition systems, this issue coupled with the removal of autolasthop from the management port means you will not be able to connect to the BIG-IP system's management port from non-directly connected clients after the installation.

On all systems, this issue means the BIG-IP system will not be able to initiate connections to non-directly connected systems over the management port after the installation.

Note: If the system is configured for dual-stack (IPv4 and IPv6) this issue can affect either (or both) stack.

Workaround:
After the issue has occurred, you can connect to the affected BIG-IP system by means of serial console or video console and apply the default gateway again.

If you are trying to prevent this issue, you can remove all management routes except the default one before performing this type of installation.


1123189-2 : De-Provisioning AFM does not disable SYN-ACK cookie generation

Links to More Info: BT1123189

Component: Advanced Firewall Manager

Symptoms:
The AFM de-provision is not in sync with TCP-SYNACK-FLOOD cookies with 'suspicious' enabled mode.

Conditions:
The TCP-SYNACK-FLOOD cookies with 'suspicious' enabled not getting disabled when AFM license is de-provisioned.

Impact:
Cookies (SYNACK) generations is happening even after AFM module is de-provisioned.

Workaround:
None


1123169-1 : Error saving an iRule when calling a procedure from HTML_TAG_MATCHED event

Links to More Info: BT1123169

Component: Local Traffic Manager

Symptoms:
When the BIG-IP system tries to save an iRule that calls a procedure from HTML_TAG_MATCHED event, an error occurs.

Conditions:
-- configure an iRule with event HTML_TAG_MATCHED
-- The event calls a procedure

Impact:
A TCL error is thrown: Rule checker ::tclCheck::checkScript did not complete: can't read "BIGIP::ltmEventCategoryHierarchy(CLIENTSIDE)": no such element in array

Workaround:
None


1123153-3 : "Such URL does not exist in policy" error in the GUI

Component: Application Security Manager

Symptoms:
Unable to create a parameter under Security ›› Application Security : URLs : Allowed URLs : Allowed HTTP URLs ›› URL Parameters

Conditions:
When the policy setting "Differentiate between HTTP/WS and HTTPS/WSS URLs" is set to "Disabled".

Impact:
User is unable to create a Parameter with a URL.

Workaround:
N/A


1122497-4 : Rapid response not functioning after configuration changes

Links to More Info: BT1122497

Component: Global Traffic Manager (DNS)

Symptoms:
DNS Rapid Response is not functioning and stats are not present and/or not changing as requests are being sent to the virtual server.

Conditions:
- DNS Rapid Response is set on the virtual.
- Rapid response is toggled off and back on in the DNS profile.

Impact:
DNS rapid response remains disabled.

Workaround:
Restarting services will allow rapid-response to begin functioning again.


1122377-2 : If-Modified-Since always returns 304 response if there is no last-modified header in the server response

Links to More Info: BT1122377

Component: Local Traffic Manager

Symptoms:
Requests sent with an If-Modified-Since header always return a 304 Not Modified response

Conditions:
The Last Modified header is not included in the origin server response headers.

Impact:
When the Last Modified header is not present in the response, its default value i.e., Thu, 01 Jan 1970 00:00:00 GMT, is used and 304 Not Modified is sent to the client.

Workaround:
Add the Last-Modified header to the response headers using iRule

when HTTP_RESPONSE priority 1 {
  set time [clock format [clock seconds] -gmt 1 -format "%a, %d %b %Y %H:%M:%S %Z"]
  HTTP::header insert Last-Modified $time
  log local0.debug "Inserting Last-Modified header as $time"
}


1122153-4 : Zonerunner GUI displaying incorrect error string "RRSig Covers Unsupported Record Type"

Links to More Info: BT1122153

Component: Global Traffic Manager (DNS)

Symptoms:
Zonerunner is displaying incorrect error information when it is unable to parse the value.

Conditions:
Zonerunner displays such errors when it is unable to parse the value when displaying records.

Impact:
The error message suggests it is a DNSSEC issue (RRSig) and is misleading.

Workaround:
None


1122021-3 : Killall command might create corrupted core files

Links to More Info: BT1122021

Component: TMOS

Symptoms:
When killing multiple processes via the 'killall' command, a single corrupted core file is created.

Conditions:
- using killall command
- killing multiple processes

Impact:
Corrupted core file is created.

Workaround:
Kill single specific processes instead


1121937-4 : ZoneRunner GUI is unable to display CAA records with "Property Value" set to ";"

Links to More Info: BT1121937

Component: Global Traffic Manager (DNS)

Symptoms:
If you try to view CAA record in ZoneRunner with "Property Value" set to ";", then "RRSig Covers Unsupported Record Type<none>:1: <none>:1: expected a string" message is displayed in GUI.

Conditions:
- Navigate to DNS :: Zones :: ZoneRunner :: Resource Record List :: Search All Records.

- Click on record of type CAA where the "Property Value" is set to ";".

Impact:
Unable to view or update CAA records through GUI where the "Property Value" is set to ";".

Workaround:
Manually edit or view the BIND configuration from the command line.


1121521-2 : Libssh upgrade from v0.7.7 to v0.9.6

Links to More Info: BT1121521

Component: Advanced Firewall Manager

Symptoms:
For Detailed Information :
https://www.libssh.org/ and https://www.libssh.org/features/

Conditions:
For Detailed Information :
https://www.libssh.org/ and https://www.libssh.org/features/

Impact:
For Detailed Information :
https://www.libssh.org/ and https://www.libssh.org/features/

Workaround:
NA


1121517-2 : Interrupts on Hyper-V are pinned on CPU 0

Links to More Info: BT1121517

Component: TMOS

Symptoms:
CPU 0 utilization is higher relative to other CPUs.

Conditions:
BIG-IP is deployed on a Hyper-V platform.

Impact:
Performance is degraded.


1121349-2 : CPM NFA may stall due to lack of other state transition

Links to More Info: BT1121349

Component: Local Traffic Manager

Symptoms:
The CPM NFA string state machines may stall due to missing data.

Conditions:
-- HTTP virtual server with LTM policy and iRule

Impact:
LTM policy rule does not trigger on HTTP URI path condition

Workaround:
Change rule from "HTTP URI path contains" to "HTTP URI full string contains"


1121169-3 : Unable to resize the /appdata: /dev/mapper/vg--db--sda-dat.appdata when in use

Links to More Info: BT1121169

Component: TMOS

Symptoms:
On systems where ID1004833 has been fixed, the resizing instructions for /appdata from K74200262 no longer work.

Conditions:
When the jitterentropy-rngd is started by systemd which is the default state of the BIG-IP.

Impact:
A filesystem resize operation may fail with the following error:

# lvreduce --resizefs --size -40G /dev/mapper/vg--db--sda-dat.appdata
Do you want to unmount "/appdata"? [Y|n] y
fsck from util-linux 2.23.2
/dev/mapper/vg--db--sda-dat.appdata is in use.
e2fsck: Cannot continue, aborting.

resize2fs 1.42.9 (28-Dec-2013)
resize2fs: Device or resource busy while trying to open /dev/mapper/vg--db--sda-dat.appdata
Couldn't find valid filesystem superblock.
fsadm: Resize ext3 failed
  fsadm failed: 1
  Filesystem resize failed.

Workaround:
Unmount /appdata and restart the jitterentropy-rngd, and then retry the resize operation.


1120529-1 : Illegal internal request in multipart batch request

Links to More Info: BT1120529

Component: Application Security Manager

Symptoms:
Request parser for inner request is intolerant for a linefeed that results in a HTTP Protocol Compliance violation with the following details.

HTTP Validation Bad multipart parameters parsing
Details Illegal internal request in multipart batch request

Conditions:
- multipart/batch(ing) request
- inner requests use LF for end-of-line marker, instead of canonical marker CRLF

Impact:
Request gets blocked

Workaround:
None


1120345-6 : Running tmsh load sys config verify can trigger high availability (HA) failover

Links to More Info: BT1120345

Component: TMOS

Symptoms:
When running tmsh 'load sys config verify' on a config that contains both an high availability (HA) group and a traffic group referencing that high availability (HA) group, this will trigger an high availability (HA) fault and failover.

Conditions:
- Running 2 BIG-IP systems in an high availability (HA) pair
- Run tmsh 'load sys config verify' on a config with the following conditions:
- Config to be verified contains an high availability (HA) group
- Config to be verified also contains a traffic group referencing the high availability (HA) group

Impact:
HA fault and failover. high availability (HA) pair will enter a degraded state.

Workaround:
No workaround currently known, but the failover fault can be cleared by running tmsh 'load sys config' on the system that had 'load sys config verify' run on it.


1117609-2 : VLAN guest tagging is not implemented for CX4 and CX5 on ESXi

Component: Local Traffic Manager

Symptoms:
Tagged VLAN traffic is not received by the BIG-IP Virtual Edition (VE).

Conditions:
Mellanox CX4 or CX5 with SR-IOV on VMware ESXi.

Impact:
Host-side tagging is required.

Workaround:
If only one VLAN is required, use host-side tagging and set the VLAN to "untagged" in the BIG-IP guest.

If multiple VLANs are required, use the "sock" driver instead. Edit the /config/tmm_init.tcl file and restart the Virtual Edition (VE) instance. Network traffic is disrupted while the system restarts.

echo "device driver vendor_dev 15b3:1016 sock" >> /config/tmm_init.tcl

CPU utilization may increase as a result of switching to the sock driver.

I know it works for sock driver. This bug was about xnet/mlxvf5 drivers.
In hal/internal folder, I saw the VMWare vendor ID in PciVendor.h file was 0x15ad which looks not correct, so I changed it to 0x15b3.


1117305-6 : The /api, a non-existent URI returns different error response with or without correct Basic Authorization credentials

Links to More Info: BT1117305

Component: TMOS

Symptoms:
The /api returns 401 when incorrect Basic Authorization credentials are supplied.
The /api returns 404 when correct Basic Authorization credentials are supplied.

Conditions:
Irrespective of the DB variable "httpd.basic_auth" value set to enable or disable.

Impact:
There is no functional impact, but all other non-existent URIs return a 302 redirect response to the TMUI login page irrespective of correct or incorrect Basic Authorization credentials, /api should also be invariably exhibiting the same behavior.

Workaround:
None


1117297-1 : Wr_urldbd continuously crashes and restarts

Links to More Info: BT1117297

Component: Traffic Classification Engine

Symptoms:
Malloc failed while wr_urldb is started

Conditions:
Intermittently reproduced when rebooting to a new version or after restarting wr_urldbd

Impact:
Wr_urldbd crashes.

Workaround:
- Stop the wr_urldbd to stabilize(#bigstart stop wr_urldbd)
-- Update the customdb(i.e. delete or add custom urls) on the backend server
-- Start wr_urldbd to download and load the new DB(#bigstart start wr_urldbd)


1117245-2 : Tomcat fails to write log messages into /var/log/tomcat/liveupdate.log file

Links to More Info: BT1117245

Component: Application Security Manager

Symptoms:
You only see this message in /var/log/tomcat/liveupdate.log file. No other log messages are written, causing troubleshooting capability with LiveUpdate.

liveupdate.script file is corrupted, live update repository initialized with default schema


This error is emitted during tomcat startup.

/var/log/tomcat/catalina.out
java.io.FileNotFoundException: /usr/share/tomcat/logs/liveupdate.log (Permission denied)

Conditions:
You are running on a version which has a bug fix for ID907025. For more information see https://cdn.f5.com/product/bugtracker/ID907025.html

Impact:
Losing troubleshooting capability with LiveUpdate

Workaround:
chown tomcat:tomcat /var/log/tomcat/liveupdate.log
bigstart restart tomcat


1116941-1 : Need larger Content-Length value supported for SIP

Component: Service Provider

Symptoms:
SIP MRF sends error 413 when the content_length value in the SIP message is greater than 65535 (0xff).

Conditions:
The SIP content_length has to be greater than 65535 (0xff) on SIP MRF configuration

Impact:
The SIP messages with content_length greater than 65535 can't be processed by the BIG-IP successfully because of the hard coded constraint on the SIP content_length

Workaround:
None


1116845-4 : Interfaces using the xnet driver are not assigned a MAC address

Links to More Info: BT1116845

Component: TMOS

Symptoms:
Interfaces on BIG-IP Virtual Edition that are capable of 100gb are unusable when the default driver of xnet is used.

The following validation error will be present in /var/log/ltm

"01071ab7:3: 'not-supported' is an invalid forward-error-correction setting for Interface"

The interfaces will not report a MAC address in either of:

- tmsh list /net interfaces
- tmsh show /sys mac

Conditions:
BIG-IP Virtual Edition where the interfaces report a 100gb max speed and the xnet driver is used.

Impact:
Interfaces are not assigned a MAC address, therefore are unusable.

Workaround:
Force the interface(s) to use a driver other then xnet.

In order to apply the workaround you will need to get 1) the available drivers and 2) the pci id of the interfaces.

The available drivers are reported using this tmctl command:

# tmctl -d blade tmm/device_probed
pci_bdf pseudo_name type available_drivers driver_in_use
------------ ----------- --------- -------------------- -------------
0000:00:03.0 F5DEV_PCI mlxvf5, xnet, sock,
0000:00:05.0 1.1 F5DEV_PCI mlxvf5, xnet, sock, xnet
0000:00:06.0 1.2 F5DEV_PCI mlxvf5, xnet, sock, xnet

The pci id is reported with the lspci -nnvvv command:

In this example: the pci id is 15b3:101a

# lspci -nnvvv | grep -i ethernet
00:03.0 Ethernet controller [0200]: Mellanox Technologies MT28800 Family [ConnectX-5 Ex Virtual Function] [15b3:101a]
00:05.0 Ethernet controller [0200]: Mellanox Technologies MT28800 Family [ConnectX-5 Ex Virtual Function] [15b3:101a]
00:06.0 Ethernet controller [0200]: Mellanox Technologies MT28800 Family [ConnectX-5 Ex Virtual Function] [15b3:101a]

And to force the use of a different driver you need to modify /config/tmm_init.tcl by adding a line such as:

device driver vendor_dev 15b3:101a mlxvf5

Where the last values of that line are the pci id and driver name.


1116513-1 : Route-domains should not be allowed on name server addresses via the GUI.

Links to More Info: BT1116513

Component: Global Traffic Manager (DNS)

Symptoms:
Route domains are allowed on nameserver address when configuring them via the GUI.

Conditions:
Create a DNS resolver via the GUI and include route domain for nameserver IP address.

Eg : Navigate to Network > DNS Resolvers > DNS Resolver List and can create a DNS resolver name server address with Route domain.

Impact:
Inconsistency between the GUI and TMSH for dns resolver namserver address.

Workaround:
None


1115041-1 : BIG-IP does not forward the response received after GOAWAY, to the client.

Links to More Info: BT1115041

Component: Local Traffic Manager

Symptoms:
After receiving a GOAWAY from the server followed by data on the same stream, the BIG-IP system does not forward that data to the client but rather sends RESET_STREAM.

Conditions:
1. Configure an NGINX server to handle two streams per connection
2. Virtual server with http2 profile
3. Send more than two requests on the same connection

Impact:
The client does not get a proper response

Workaround:
None


1114253-4 : Weighted static routes do not recover from BFD link failures

Links to More Info: BT1114253

Component: TMOS

Symptoms:
If a BFD link fails and recovers, the weighted static route that should be preferred does not populate back into the routing table.

Conditions:
Weighted static routes with BFD configured, this is an example of the affected configuration:

ip route 0.0.0.0/0 10.8.8.4 100
ip route 0.0.0.0/0 10.8.8.34 200
ip static 0.0.0.0/0 10.8.8.4 fall-over bfd
ip static 0.0.0.0/0 10.8.8.34 fall-over bfd

After BFD session to 10.8.8.4 fails and recovers the default route will still be pointing to 10.8.8.34.

Impact:
Incorrect route nexthop.

Workaround:
Re-add route config statements.


1114137-4 : LibUV library for latest bind 9.16

Component: TMOS

Symptoms:
The latest bind software requires the latest libuv for performance improvements and to support new protocol layers (for example, DNS over TLS).

Conditions:
The latest bind software requires the latest libuv for performance improvements and to support new protocol layers (for example, DNS over TLS).

Impact:
None

Workaround:
None


1113961-1 : BIG-IP 16.1.3 VE with FIPS 140-3 May Fail to start in AWS-China

Links to More Info: K43391532, BT1113961

Component: TMOS

Symptoms:
BIG-IP 16.1.3 VE with FIPS 140-3 may fail to start in AWS-China

Conditions:
Running BIG-IP 16.1.3 VE with FIPS 140-3 with 16.1.3 in AWS China region

Impact:
BIG-IP 16.1.3 VE with FIPS 140-3 may fail to start in AWS-China

Workaround:
Upgrade to 16.1.3.1 when it is available.


1113881-2 : Headers without a space after the colon trigger an HTTP RFC violation

Component: Application Security Manager

Symptoms:
An "Unparsable request content" violation is detected for valid headers without a space after the headers name ':'

Conditions:
Any header without a space between the ':' and the header value will trigger "Unparsable request content"

Impact:
Requests that suppose to pass are blocked by ASM enforcer

Workaround:
The client has to send headers with space after ':'


1113753-2 : Signatures might not be detected when using truncated multipart requests

Component: Application Security Manager

Symptoms:
On special cases when sending long requests that include a multipart section, signatures that should be detected in the multipart body might not be detected.

Conditions:
1. WAF-policy is attached to virtual server.
2. Signatures are enabled in the WAF policy.
3. Signatures contain special characters, i.e. ;"=\n
4. Request is longer than the value in max_raw_request_len.
5. Sending a multipart request.

Impact:
Signature is not detected.

Workaround:
None


1113661-1 : When OAuth profile is attached to access policy, iRule event in VPE breaks the evaluation

Links to More Info: BT1113661

Component: Access Policy Manager

Symptoms:
After upgrading to 16.1.2.1, the OAuth configuration does not work anymore.

Based on the below observations, an internal redirect to /renderer/agent_irule_event_form.eui is initiated but it is not processed, so the ACCESS_POLICY_AGENT_EVENT event is never fired.

Observations:
Following are the results from in-house troubleshooting:
Test 1: Access Policy evaluation works with a standard Access Profile, clientless mode set with iRule, and an iRule event.
Test 2: Access Policy evaluation fails with a standard Access Profile but an OAuth profile attached to access policy (clientless mode to be set automatically) and an iRule event.

Conditions:
As soon as the iRule event is removed from VPE in Test 2, the access policy evaluation works fine.

Impact:
ACCESS_POLICY_AGENT_EVENT event is never fired


1113333-3 : Change ArcSight Threat Campaign key names to be camelCase

Component: Application Security Manager

Symptoms:
The threat_campagin_names and staged_threat_campaign_names do not follow other key name format. Changing these key names to be camelCase (threatCampaignNames and stagedThreatCampaignNames).

Conditions:
ArcSight is in use with ASM remote logging.

Impact:
Inconsistent key name formatting.

Workaround:
None


1113181-2 : Self-IP allows no traffic following a modification from "Allow Custom (Include Default)" to "Allow Custom".

Links to More Info: BT1113181

Component: Local Traffic Manager

Symptoms:
Although a Self-IP address appears configured correctly (for example, when this is inspected using the WebUI or the tmsh utility), the Self-IP address does not allow through any traffic. Effectively, the Self-IP address behaves as if it was set to "Allow None".

Conditions:
The port-lockdown setting of the Self-IP address was recently modified from "Allow Custom (Include Default)" to "Allow Custom".

Impact:
The Self-IP does not allow through any traffic, whereas it should allow through the traffic in your custom list of ports and protocols.

Workaround:
You can work around this issue by temporarily setting the affected Self-IP to "Allow None" and then again to "Allow Custom", specifying your desired custom list of ports and protocols.


1113161-2 : After upgrade, Learning and Blocking Settings page is not loading because some policies are still pointing to deleted factory Negsig sets

Links to More Info: BT1113161

Component: Application Security Manager

Symptoms:
Learning and Blocking Settings page is not loading

Conditions:
Some policies are using factory sets which were deleted in later versions, and an upgrade was performed.

Impact:
When trying to open "Security ›› Application Security : Policy Building : Learning and Blocking Settings" page, GUI is stuck on 'loading' status

Workaround:
Run this mysql in the BIG-IP in order to fix the database, it will remove all unreferenced policy sets from the system:
mysql -p`perl -MF5::Cfg -e 'print F5::Cfg::get_mysql_password(user => q{root})'` -e "delete from PLC. PL_POLICY_NEGSIG_SETS where set_id not in (SELECT set_id from PLC.NEGSIG_SETS);"


1112805-4 : ip_address_intelligence field is not populated with value in ArcSight remote log when source IP is IPv4

Links to More Info: BT1112805

Component: Application Security Manager

Symptoms:
The key used for the ip_address_intelligence field is mapped to an IPv6 Address in the latest CEF standard.

Conditions:
-- IP Intelligence is enabled.
-- An ArcSight remote logger is configured.
-- A HTTP transaction is carried out with a malicious Source IP Address

Impact:
The ip_address_intelligence field value is not populated in the ArcSight remote log

Workaround:
None


1112781 : DNS query drops on Virtual Edition platform if the packet size is above 1500 for NAPTR record.

Links to More Info: BT1112781

Component: Advanced Firewall Manager

Symptoms:
The BIG-IP system drops the packet if the DNS response size is larger than 2048.

Conditions:
When the DNS server sends a response larger than 2048 bytes.

Impact:
The BIG-IP system drops the packet and does not respond to the client.

Workaround:
If possible, switch from UDP to TCP to avoid dropping the packet.


1112745-2 : System CPU Usage detailed graph is not accessible on Cerebrus+

Links to More Info: BT1112745

Component: Local Traffic Manager

Symptoms:
When accessing performance reports of CPU usage detailed graph, error "Error trying to access the database." is displayed since the CPU graph name is getting truncated.

Conditions:
When on a single blade, if we have more than 17 TMMs this error will be seen.

Impact:
Detailed graph for system CPU usage will not be accessible.

Workaround:
No workaround


1112649 : FIPS 140-2/FIPS 140-3 compliant mode is incorrect after upgrade to 16.1.2.2

Links to More Info: BT1112649

Component: TMOS

Symptoms:
After upgrading a BIG-IP system that is licensed for FIPS 140-2 compliant mode or with the full-box FIPS license, the FIPS mode reported is FIPS 140-3 compliant mode, but FIPS 140-2 and FIPS 140-3 mode is not properly enabled.

Also, if you upgrade a BIG-IP system that is licensed for FIPS 140-2 compliant mode or with the full-box FIPS license, and upgrade to version 16.1.2.2 without first re-activating your license, after the upgrade is complete you will be prompted to reboot. After the reboot, FIPS mode will be disabled.

Conditions:
-- BIG-IP system running a software version earlier than 16.1.2.2, regardless of hardware or software platform type
-- The FIPS 140-2 compliant mode or full-box FIPS license is applied
-- Upgrade to version 16.1.2.2

Impact:
After the system reboots, the BIG-IP system reports that FIPS 140-3 compliant mode is enabled, but the FIPS mode is not FIPS 140-2 or FIPS 140-3 compliant in this version.

If you did not re-activate the license prior to upgrade, the BIG-IP system will prompt you to reboot, and then will start with FIPS mode disabled.

Workaround:
If you are upgrading a BIG-IP system that has a FIPS 140-2 compliant mode license applied, do not upgrade to version 16.1.2.2; instead, upgrade to BIG-IP version 16.1.3 or higher if your intention is to upgrade to version 16.x.


1112537-2 : LTM/GTM config instantiated in a certain way can cause a LTM/GTM monitor to fail to delete.

Links to More Info: BT1112537

Component: TMOS

Symptoms:
Upon attempting to delete a LTM or GTM monitor, the system returns an error similar to the following example, even though the monitor being deleted is no longer in use anywhere:

01070083:3: Monitor /Common/my-tcp is in use.

Conditions:
-- The configuration was loaded from file (for example, as restoring a UCS archive would do).

-- A BIG-IP Administrator deletes all objects using the monitor, and then attempts to delete the monitor itself.

Impact:
LTM or GTM monitor no longer in use anywhere cannot be deleted from the configuration.

Workaround:
Run one of the following sets of commands (depending on the affected module) and then try to delete the monitor again:

tmsh save sys config
tmsh load sys config

tmsh save sys config gtm-only
tmsh load sys config gtm-only


1112385-3 : Traffic classes match when they shouldn't

Links to More Info: BT1112385

Component: Local Traffic Manager

Symptoms:
Traffic classes may match when they should not.

Conditions:
* Fix for ID1074505 is present (without that fix this bug is hidden).
* Traffic class uses none (or equivalently all 0s) for source-address.

Impact:
Traffic is not categorized properly.

Workaround:
Specify a source address, e.g.

ltm traffic-class /Common/blah {
    source-address 1.1.1.1
    source-mask none
   ...
}

Note that because the mask is none this won't have any effect (other than working around this bug).


1112349-4 : FIPS Card Cannot Initialize

Links to More Info: BT1112349

Component: Local Traffic Manager

Symptoms:
Initializing the FIPS card for the first time which contains the FIPS firmware CNN35XX-NFBE-FW-1.1-02 may cause the below error and will not be able to initialize the card:
Enter new Security Officer password (min. 0, max. 0 characters):
ERROR: Too long input (max.: 0 characters)
ERROR: Failed to read password
ERROR: INITIALIZATION FAILED!

Conditions:
First time initialization of new device with "tmsh run util fips-util -f init" command which contains the FIPS firmware CNN35XX-NFBE-FW-1.1-02

Impact:
FIPS card cannot be used for the FIPS key traffic and will not be able to re-initialize.

Workaround:
None


1112205-3 : HTTP/2 may garble responses if the client-side stream aborts while response headers are on the wire

Links to More Info: BT1112205

Component: Local Traffic Manager

Symptoms:
If the client-side stream aborts while response headers are on the wire, the subsequent requests may receive a garbled response.

Conditions:
- HTTP2 profile is used on both client and server side.
- The client terminates the stream while the response has not yet reached the BIG-IP system.

Impact:
The client will receive an obscure response

Workaround:
None


1112109-4 : Unable to retrieve SCP files using WinSCP or relative path name

Links to More Info: BT1112109

Component: TMOS

Symptoms:
When you attempt to retrieve a file with WinSCP, you receive an error dialog and the session will be terminated:

"SCP Protocol error: Invalid control record (r; elative addresses not allowed)

Copying files from the remote side failed."

If you attempt to transfer a file by the relative path with a command line utility the transfer will fail with the message:
"relative addresses not allowed"

Conditions:
-- Running BIG-IP version with a fix for ID 915981
-- Using WinSCP set to use SCP protocol to retrieve files from a BIG-IP system.
-- Using a relative remote path to transfer a file with the command line SCP utility.

Impact:
Cannot use WinSCP to retrieve files such as packet captures, log archives, or other diagnostic data from the BIG-IP system.

Workaround:
Use a command line SCP tool that allows specifying an absolute path for the source and/or destination file (a path that starts with a forward slash /), when the source and/or destination locations are a BIG-IP device.

You may use WinSCP in SFTP mode if the user ID is permitted to do so.


1112089-1 : Prevent zrd from rolling back named.conf file in wrong situations

Links to More Info: BT1112089

Component: Global Traffic Manager (DNS)

Symptoms:
The zrd process may roll name.conf back which may cause unexpected changes.

This shows up in the /var/log/gtm file or in the GUI with a message similar to the following:

err zrd[27809]: 01150306:3: Error connecting to named socket 'Connection refused'.
(or)
err zrd[16198]: 01150306:3: Error connecting to named socket 'Connection timed out'.

Conditions:
As of now list include the following scenarios:
-- One of the scenario is seen as part of ID1083405 - see https://cdn.f5.com/product/bugtracker/ID1083405.html
-- Named process isn’t running, updating wide IPs will cause the same symptom.

Impact:
Looking up or modifying zone records may fail. This will affect the other members in the gtm sync group as well.

Workaround:
None


1111793-2 : New HTTP RFC Compliance check for incorrect newline separators between request line and first header

Links to More Info: BT1111793

Component: Application Security Manager

Symptoms:
ASM does not enforce incoming HTTP requests where the request line and the first header are separated with a line feed ('\n').

Conditions:
Any HTTP request with a line feed only at the end of the request line will not be enforced.

Impact:
Invalid requests might pass through ASM enforcement.

Workaround:
None


1111629-4 : Messages with "Failed Read: User, referer" are logged in /var/log/httpd/httpd_errors

Links to More Info: BT1111629

Component: TMOS

Symptoms:
After logging in to the GUI you may observe these logs under /var/log/httpd/httpd_errors

warning httpd[7698]: [auth_pam:warn] [pid 7698] [client 10.6.4.2:61221] AUTHCACHE Error processing cookie AFQ6MCL2VWASB6NZTAWGQLFFWY - Failed Read: User, referer:

Conditions:
- Using token authentication for rest calls
- Login to the GUI

Impact:
- Increase log space usage

Workaround:
None


1111473-4 : "Invalid monitor rule instance identifier" error after sync with FQDN nodes

Links to More Info: BT1111473

Component: Local Traffic Manager

Symptoms:
The following log messages may be observed in /var/log/ltm:

bigip1 err mcpd[4783]: 01070712:3: Caught configuration exception (0), Invalid monitor rule instance identifier: 29.

This may also result in some monitors stuck in "checking" state.

Conditions:
-- FQDN nodes exist on the configuration.
-- A full config sync occurs
-- Device contains a fix for ID1017513
-- May happen regardless of bigd or in-tmm monitoring

Impact:
Some monitor statuses may not be correctly reported. Some monitors may be stuck in "checking" state.

Workaround:
Force the mcpd process to reload the BIG-IP configuration: K13030.


1111421-1 : TMSH/GUI fails to display IPsec SAs info

Links to More Info: BT1111421

Component: TMOS

Symptoms:
Ipsec SAs are not visible in GUI/TMSH in tunnel/interface mode
GUI network -> ipsec -> diagnostic -> traffic-selectors -> security association details shows no SAs
The 'tmsh show net ipsec ipsec-sa traffic-selector ts' command shows no SA

Conditions:
-- Configure the ipsec with tunnel/Interface mode.
-- Create the tunnel.
-- Check the ipsec-sa

Impact:
You are unable to see ipsec-sa in GUI/TMSH

Workaround:
None


1111361-3 : Refreshing DNS wide IP pool statistics returns an error

Links to More Info: BT1111361

Component: Global Traffic Manager (DNS)

Symptoms:
Refreshing the wide IP pool statistics results in the error message 'An error has occurred while trying to process your request'.

Conditions:
Go to "Statistics > Module Statistics > DNS > GSLB > Wide IPs > Statistic Pools", and click "Refresh".

Impact:
No results are returned, and the error message 'An error has occurred while trying to process your request' is displayed.

Workaround:
N/A.


1111189-2 : Listing errors in tmsh and installation failures when the configuration includes an AVR scheduled-report.

Links to More Info: BT1111189

Component: Application Visibility and Reporting

Symptoms:
-- The tmsh utility may return an error when listing analytics configuration.

-- TMOS installations may fail and return an error.

-- Saving new UCS archives may fail and return an error.

In all cases, the error is similar to the following example:

TSocket::open() getaddrinfo() <Host: 127.3.0.2
 Port: 9090>Name or service not known
std exception: (Could not resolve host for client socket.), exiting...

Conditions:
-- Multi-blade VIPRION system (either metal or in the form of a vCMP guest).

-- AVR is provisioned.

-- At least one AVR scheduled-report is present in the configuration.

-- An action such as listing the config, saving a UCS archive, performing a TMOS installation, etc. is performed on a secondary blade.

Impact:
The operation you were attempting fails and an error is returned.

Workaround:
The only workaround consists in removing all AVR scheduled-reports, performing the intended task, and then re-defining the AVR scheduled-reports as necessary. This is of course disruptive and may not be indicated for your site. If you require an Engineering Hotfix for this issue, please contact F5 Support.


1111149-2 : Nlad core observed due to ERR_func_error_string can return NULL

Links to More Info: BT1111149

Component: Access Policy Manager

Symptoms:
The following symptoms are observed

In /var/log/ltm:
err nlad[17535]: OpenSSL: DRBG Continuous RNG test failed: DRBG stuck.

Nlad core is observed
/var/log/kern.log:Apr 7 03:46:53 <vs name > info kernel: nlad[13119]: segfault at 0 ip <> sp <> error 4.

Conditions:
NLAD core is SIGSEGV - crashing while processing a SSL Certificate via a SAML login.

Impact:
Core results in disruption of APM sessions

Workaround:
None


1110949-2 : Updating certKeyChain of parent SSL profile using iControl does not change the cert and key outside certKeyChain of the child profile

Links to More Info: BT1110949

Component: Local Traffic Manager

Symptoms:
Invalid config after iControl call: the certificate and key of the child profile do not change as expected.

Conditions:
1. The SSL profile should default from a parent profile.
2. iControl REST is used to change the certkeychain of the parent profile.
3. The issue cannot be seen after the first call but from the second call, it's always reproducible.

Impact:
1. The child profile has an incorrect configuration.
2. The older certificate/key can not be deleted as they are still in use in the child profile.

Workaround:
Can use currently deprecated iControl call by using key and cert instead of certkeychain as follows:

curl -k -u admin:admin -H "Content-Type: application/json" -X PATCH https://10.155.75.246/mgmt/tm/ltm/profile/client-ssl/parent.example.com -d '{"key":"/Common/default.key","cert":"/Common/default.crt"}'


1110893-4 : Some portions of the BIG-IP GUI do not work when accessed behind an HTTP proxy

Links to More Info: BT1110893

Component: TMOS

Symptoms:
Some sections of the BIG-IP GUI fail to load properly, and may report "An error occurred:" Additionally, iControl REST calls may fail with a 401 unauthorized error.

Conditions:
-- BIG-IP GUI or iControl REST is accessed behind a proxy that that includes an X-Forwarded-For header

-- The "httpd.matchclient" BigDB key is set to true (this is the default).

Impact:
Some portions of the GUI are broken as well as iControl REST calls may fail.

Workaround:
Disable the "httpd.matchclient" DB key:

tmsh modify sys db httpd.matchclient value false
bigstart restart httpd


1110813-3 : Improve MPTCP retransmission handling while aborting

Component: Local Traffic Manager

Symptoms:
- MPTCP enabled TCP connection is aborting.
- TMM cores.

Conditions:
- MPTCP is enabled.
- MPTCP enabled TCP connection is aborting.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Disable MPTCP option in the TCP profile.


1110489-3 : TMM crash in nexthop_release with ACCESS_ACL_ALLOWED iRule event

Links to More Info: BT1110489

Component: Access Policy Manager

Symptoms:
Tmm crashes.
/var/log/tmm contains
May 24 18:06:24 sslo.test.local notice panic: ../net/nexthop.c:165: Assertion "nexthop ref valid" failed.

Conditions:
An iRule is applied to a virtual Server containing a ACCESS_ACL_ALLOWED iRule event.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1110485-3 : SSL handshake failures with invalid profile error

Links to More Info: BT1110485

Component: Local Traffic Manager

Symptoms:
1. TMM reports SSL handshake failures with reason "hud_ssl_handler:1208: alert(40) invalid profile unknown on VIP"

2. There will be Certificate read errors in the ltm log "reading: Unknown error."

Conditions:
-- The certificates associated with the SSL profile are corrupted by modifying/adding/deleting them manually/Venafi

-- There are frequent unintentional Certificate updates

Impact:
-- The BIG-IP system will not be able process the traffic
-- All traffic to particular virtual servers fails

Workaround:
1. Correct the certificates which are corrupted and make them valid.

2. Deattach/Remove the corresponding SSL profile from all virtual servers to which it is applied.

3. In the GUI open the virtual server and click on update and make sure there are no errors shown on the screen.

4. Now re-apply the SSL profile to the virtual server


1110281-2 : Behavioral DoS does not ignore non-http traffic when disabled via iRule HTTP::disable and DOSL7::disable

Links to More Info: BT1110281

Component: Application Security Manager

Symptoms:
Non-HTTP traffic is not forwarded to the backend server.

Conditions:
- ASM provisioned
- Behavioral DoS profile assigned to a virtual server
- DOSL7::disable and HTTP::disable applied at when CLIENT_ACCEPTED {}

Impact:
Broken webapps with non-HTTP traffic.

Workaround:
Instead of using DOSL7::disable, redirect non-HTTP traffic to a non-HTTP aware virtual server using the iRule command virtual <virtual_server_name>.


1110241-2 : in-tmm http(s) monitor accumulates unchecked memory

Links to More Info: BT1110241

Component: In-tmm monitors

Symptoms:
Connflows growing larger than expected/desired.

Conditions:
-- in-TMM monitors are enabled
-- http(s) monitors are configured
-- Pool members continue spooling chunked data

Impact:
If an http(s) server does not close its connection to BIG-IP and continues spooling chunked data, the connflow remains and can eventually cause similar issues.

Workaround:
Three possible:
1. Fix the server.
2. Periodically reboot the server.
3. Use BigD LTM monitors.


1110165-3 : Fasthttp connections infrequently fail

Links to More Info: BT1110165

Component: Local Traffic Manager

Symptoms:
BIG-IP can rarely send client payloads to servers before the connection has been fully established.

Conditions:
-- Fasthttp virtual server
-- Cookie persistence enabled
-- The payload is spread across multiple packets

Impact:
Some servers will reset the connection, causing client side HTTP requests to fail.

Workaround:
Use a fastl4/standard virtual server instead.


1109953-4 : TMM may crash if a data-group is used when an SSL Forward Proxy Bypass/Intercept list contains extremely long entry

Links to More Info: BT1109953

Component: Local Traffic Manager

Symptoms:
A very long entry (exceeding the maximum length allowed by internet stndards) in a data-group used for SSL Forward Proxy Bypass/Intercept hostname list may cause TMM to crash.

Conditions:
All of the below conditions have to be met:
-- A virtual server uses SSL profile
-- This SSL profile has Forward Proxy enabled.
-- The SSL profile has Forward Proxy Bypass enabled.
-- The SSL profile uses Hostname Bypass and/or Hostname Intercept data-group.
-- Anny to the data-groups contains entries which are longer than 255 characters.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Make sure all entries in the data-group used for intercept/bypass hostnanme list do not exceed 255 characters. According to RFC 1035 section 2.3.4, longer hostnames are not valid.


1108681-4 : PEM queries with filters return error message when a blade is offline

Links to More Info: BT1108681

Component: Policy Enforcement Manager

Symptoms:
Attempting to retrieve subscriber session data for a specific subscriber returns the following error: "Data Input Error: ERROR: 'query_view' query reply did not contain a result object."

Conditions:
One of the blades is disabled, and the pem sessiondb query contains a filter, for example subscriber-id or session-ip.

Impact:
Cosmetic error, no impact.

Workaround:
Enable the disabled blades, or send a pem sessiondb query without filters.


1108657-3 : No notification about disabled "Virus detected" violation in case of enabling "Anti-Virus Protection"

Component: Application Security Manager

Symptoms:
If the "Virus detected" violation is disabled, there is no notification about it after enabling "Anti-Virus Protection".

Conditions:
1. In Security ›› Application Security : Policy Building : Learning and Blocking Settings screen, for Virus Detected violation set at least one of the Learn, Alarm, or Block checkboxes as empty.

2. In Security ›› Application Security : Security Policies : Policies List ›› <selected_policy> screen - check the Scan HTTP Uploads (in Anti-Virus Protection field)

3. No warning is shown.

Impact:
No warning is shown to user which indicates that the related violation settings are switched off (Learning, Alarming or Blocking)

Workaround:
None


1108557-1 : DNS NOTIFY with TSIG is failing due to un-matched TSIG name

Links to More Info: BT1108557

Component: Global Traffic Manager (DNS)

Symptoms:
DNS NOTIFY messages are ignored.

Conditions:
The TSIG on the secondary needs to have the same algorithm and secret, but one or more characters in the name must be a different case.

Impact:
Failure to update the zone in a timely fashion.

Workaround:
Remove the offending TSIG on the secondary and re-create it with case matching the primary server.


1108237-2 : Incorrect 'No reply from big3d: timed out' result for certain destinations monitored by GTM.

Links to More Info: BT1108237

Component: Global Traffic Manager (DNS)

Symptoms:
It is possible for monitor probes to a certain destination to be owned by no GTM device in the sync-group. As a result, no monitoring of the destination will be performed, and the monitored object will be incorrectly marked down with reason "no reply from big3d: timed out".

Conditions:
-- GTM sync-group with multiple GTM devices (including a sync-group that contains only a single GTM server with more than one GTM device in it).

-- Monitors specifying an explicit destination to connect to (e.g. with the property "destination 192.168.1.1:*").

-- The destination of a monitored object (e.g. the IP address of the gtm server) is different from the destination explicitly defined in a monitor assigned to the object.

-- The two mismatching destination values are assigned to different GTM devices in the sync-group for monitoring.

Impact:
Monitored GTM objects may have an incorrect status.

Workaround:
None


1108109-4 : APM policy sync fails when access policy contains customization images

Links to More Info: BT1108109

Component: Access Policy Manager

Symptoms:
APM policy sync fails after an upgrade. Mcpd logs an error

err mcpd[6405]: 01b70117:3: local_path (/tmp/psync_local_file) starts with invalid directory. Valid directories are /var/config/rest/, /var/tmp/, /shared/tmp/.

Conditions:
APM access policy contains a custom image file

Impact:
APM policy sync fails.

Workaround:
None


1107605-1 : TMM crash reported with specific policy settings

Links to More Info: BT1107605

Component: Local Traffic Manager

Symptoms:
TMM crashes when HTTPS request for a non-existent document

Conditions:
1) Virtual server with HTTP Profile
2) LTM Policy with "shutdown connection" for 400/404 response codes
3) Request for non-existent document

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Remove the policy and use an iRule with the same conditions as in the policy.


1107565 : SSL Persistence behavior change for TLS1.3 connection between v16.1.0 and v16.1.2.2

Links to More Info: BT1107565

Component: Local Traffic Manager

Symptoms:
The BIG-IP system resets TLS 1.3 connections when the client-hello contains a session-ID.

Conditions:
-- Virtual server has ssl persistence enabled
-- TLS 1.3 is used
-- The client-hello message contains a session-ID.

Impact:
Traffic uses TLS 1.3 and SSL persistence is disrupted.

Workaround:
None


1107549-2 : In-TMM TCP monitor memory leak

Links to More Info: BT1107549

Component: In-tmm monitors

Symptoms:
TMM memory use grows unbounded; aggressive sweeper is engaged

Conditions:
-- In-TMM TCP monitors are enabled

Impact:
TCP peer ingress accumulates over time. Over an extended period of time the aggressive sweeper begins freeing memory.

Workaround:
1. Rebooting the BIG-IP system after the change is made is one potential remedy.
2. Use regular LTM monitors.


1107453 : Performance drop observed in some Ramcache::HTTP tests on BIG-IP i10800 platform

Links to More Info: BT1107453

Component: Local Traffic Manager

Symptoms:
Drop in TPS of around 6.5% observed for Ramcache::HTTP tests.

Conditions:
- BIG-IP i10800 l7-performance-fpga platform
- 5KB file size with 1 Request Per Connection
- 5KB file size with 100 Request Per Connection

Virtual server with the following profiles -
1. http
2. tcp profile with nagle disabled
3. web acceleration profile with following attributes -
   - cache-max-age 36000
   - cache-object-max-size 1500001
   - cache-object-min-size 1

Impact:
Delay in client side response during peak traffic flow due to lowered throughput.

Workaround:
None


1106937-3 : ASM may skip signature matching

Component: Application Security Manager

Symptoms:
Under certain conditions ASM skips signature matching.

Conditions:
Authorization header type is Bearer.
- When input contains less than or more than 3 parts of JWT token values.
- When base64 decode fails while decoding JWT token.

Impact:
Signature matching gets skipped.

Workaround:
None


1106757-3 : Horizon VDI clients are intermittently disconnected

Component: Access Policy Manager

Symptoms:
VMware Horizon Clients experience intermittent freezes and disconnects as the mapping between blast UUID and session id in CLIENT_CLOSED function is maintained only for 20 seconds.

Conditions:
-- VMware VDI is configured via an iApp
-- The connection to the virtual server is lost for more than 20 seconds

Impact:
VMware Horizon Clients experience freezes and disconnects intermittently.

Workaround:
None


1106673-3 : Tmm crash with FastL4 virtual servers and CMP disabled

Links to More Info: BT1106673

Component: Local Traffic Manager

Symptoms:
With CMP disabled, all traffic is forwarded to one TMM thread. A crash occurs when these flows are torn down.

Conditions:
The following is configured on a virtual server:
-- A fastL4 profile
-- CMP is disabled
-- An IPS firewall policy

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Enable CMP on the virtual server.

tmsh modify ltm virtual <virtual_server_name> cmp-enabled yes


1106489-2 : GRO/LRO is disabled in environments using the TMM raw socket "sock" driver.

Links to More Info: BT1106489

Component: TMOS

Symptoms:
GRO/LRO packets are not received: "tmctl -d blade tmm/ndal_rx_stats" shows "0" in "lro". The linux host has GRO disabled: "ethtool -k eth1 | grep generic-receive-offload" shows "off".

Conditions:
-- BIG-IP is deployed in a Hyper-V environment.
-- Any environment such that "tmctl -d blade tmm/device_probed" displays "sock" in "driver_in_use".

Impact:
Performance is degraded.

Workaround:
Manually enable GRO on the device: ethtool -K eth1 gro on

Check that it's enabled with: ethtool -k eth1 | grep generic-receive-offload


1106273-3 : "duplicate priming" assert in IPSECALG

Links to More Info: BT1106273

Component: Advanced Firewall Manager

Symptoms:
This is a specific issue with a complicated firewall/NAT/IPSEC scenario. In this case, when applying changes to a firewall policy in transparent mode, IPSECALG triggers a "duplicate priming" assert

Conditions:
When an IPSec session is established from a device with a source IP which has a firewall policy (transparent mode). As soon as traffic is passed over the new IPSec tunnel, this clash in the rules results in a tmm core.

Impact:
TMM asserts with "duplicate priming" assert.
Traffic disrupted while tmm restarts.

Workaround:
None


1105969-1 : Gratuitous ARP not issued for non-floating self-IP on clicking "Update" via the GUI

Links to More Info: BT1105969

Component: Local Traffic Manager

Symptoms:
A gratuitous ARP (GARP) is not issued as per K15858.

Conditions:
After the BIG-IP system is fully started and interfaces are online, select the non-floating self IP address in the Configuration utility and then select Update (without making any changes).

Impact:
You cannot force non-floating self-IPs to send a gratuitous ARP post-boot.

Workaround:
None


1105901-2 : Tmm crash while doing high-speed logging

Links to More Info: BT1105901

Component: TMOS

Symptoms:
Tmm crashes

Conditions:
-- High-speed logging is configured
-- Network instability occurs with the logging pool members

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1105757-1 : Creating CSR with invalid parameters for basic-constraints, tmsh does not generate meaningful errors

Links to More Info: BT1105757

Component: TMOS

Symptoms:
A similar error as below is observed:
Key management library returned bad status: -45, No Error

Conditions:
Always observed.

Impact:
The error thrown is not meaningful hence it is difficult to identify the invalid parameters.

Workaround:
N/A


1105341-2 : Decode_application_payload can break exponent notation in JSON

Links to More Info: BT1105341

Component: Application Security Manager

Symptoms:
With decode_application_payload set to 1, the single pass of decoding prior to JSON parsing will convert positive exponents to ascii characters ie "+" to " ". This results in Malformed numeric value violations

Conditions:
Positive exponents with decode_application_payload set to 1.

Impact:
Malformed JSON violations

Workaround:
Disable decode_application_payload
decode_application_payload set to 0.


1104553-2 : HTTP_REJECT processing can lead to zombie SPAWN flows piling up

Links to More Info: BT1104553

Component: Local Traffic Manager

Symptoms:
In the execution of a specific sequence of events, when TCL attempts to execute the non-existing event, it follows a path which in turn makes SPAWN flow to become a zombie, which pile up over time showing up on the monitoring system.

Conditions:
-- http2, client-ssl, optimized-caching filters on the virtual server
-- HTTP::respond iRule with LB_FAILED event and set of iRules like HTTP_REQUEST, HTTP_RESPONSE, CLIENTSSL_HANDSHAKE, CACHE_RESPONSE, ASM_REQUEST_BLOCKING
-- send http2 request through the virtual server

Impact:
Clients may not be able to connect to the virtual server after a point in time.


1104037-2 : Tmm crash after changing "connection.vlankeyed" to disabled on system with L2 wire

Links to More Info: BT1104037

Component: SSL Orchestrator

Symptoms:
Tmm crashes.

Conditions:
Changing "connection.vlankeyed" from enabled to disabled on a system configured for L2 wire

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Keep "connection.vlankeyed" enabled


1103953-1 : SSMTP errors in logs every 20 minutes

Links to More Info: BT1103953

Component: TMOS

Symptoms:
An error is logged every 20 minutes to /var/log/maillog

err sSMTP[9797]: Unable to connect to "localhost" port 25.
err sSMTP[9797]: Cannot open localhost:25

The symptoms are similar to what you see in https://support.f5.com/csp/article/K60914243 but the solution in that article will not help. K60914243 talks about 15.x while current issue is on 16.x.

Conditions:
This occurs in one of the following happens

1. You have manually deleted restjavad or restnoded log files with following commands
   rm /var/log/restjavad*
   rm /var/log/restnonded*

2. One of the restjavad/restnoded log files is small and unable to rotate (rotation fails). This happens when file size does not exceed default "max-file-size"

Impact:
Log rotation for restjavad/restnoded will be stuck. You may see system emails about sSMTP errors every 20 minutes.

Workaround:
This issue subsides if you manually create a file for the stuck log file.

1. Open a command terminal
2. Run # ls -l /var/log/restnoded*
3. If you find that restnonded1.log is missing then manually create it
    # touch /var/log/restnoded/restnoded1.log
4. Run # ls -l /var/log/restjavad*.log
5. If you find that restjavad.1.log is missing then manually create it
    # touch /var/log/restjavad.1.log


1103833-2 : Tmm core with SIGSEGV in gtmpoolmbr_UpdateStringProc

Links to More Info: BT1103833

Component: Global Traffic Manager (DNS)

Symptoms:
Tmm cored with SIGSEGV.

Conditions:
-- iRule pool command with member which is determined at run-time
-- A pool member is used for the iRule
-- The previous pool member is deleted and then re-created using the same name
-- That pool member is picked again for the next iRule event.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Use a string command to category the pool member variable like this:

  pool dnspool member [string trim $pool_member]


1103617-4 : 'Reset on Timeout' setting might be ignored when fastl4 is used with another profile.

Links to More Info: BT1103617

Component: Local Traffic Manager

Symptoms:
'Reset on Timeout' setting might be ignored when Fastl4 profile is configured along with some other profile.

Conditions:
Fastl4 profile is configured along with some other profile (for example IPS).

Impact:
Traffic might be reset unexpectedly.

Workaround:
None


1103245 : Policies not being applied

Links to More Info: BT1103245

Component: Traffic Classification Engine

Symptoms:
When two firewall policies are applied, one at a global level and one at the virtual server context, none of the policies are applied.

Conditions:
Apply two different policies, one at the virtual server context and the other at a global level.

Impact:
Policies are not applied

Workaround:
Attach the required policy either in global level or virtual server context, not in both


1103117-2 : iAppLX extension using express with httpserver script leaves lingering client-side flow on HTTP requests.

Links to More Info: BT1103117

Component: Local Traffic Manager

Symptoms:
While using an iAppLX extension using express with simple HTTP server script, tmsh show sys conn shows a lingering client-side flow that is eventually expired by the sweeper.

Conditions:
Virtual server with iAppLX extension using express with a simple httpserver script like below:

  app.use(express.static('public'));
  var plugin = new f5.ILXPlugin();
  plugin.startHttpServer(app);

Impact:
The connection table (tmsh show sys conn) shows a lingering client-side flow that is eventually expired by the sweeper.

Workaround:
None


1102849-3 : Less-privileged users (guest, operator, etc) are unable to run top level commands

Links to More Info: BT1102849

Component: TMOS

Symptoms:
Less privileged users are no longer able to run top-level commands such as "show running-config recursive". Executing this command from TMOS results in an error:

Unexpected Error: Can't display all items, can't get object count from mcpd

and mcpd throws error:

result_message "01070823:3: Read Access Denied: user (test) type (Abort Ending Agent)"

Conditions:
User account with a role of guest, operator, or any role other than admin.

Impact:
You are unable to show the running config, or use list or list sys commands.

Workaround:
Logon with an account with admin access.


1102429-2 : iRule 'reject' command under 'FLOW_INIT' event does not send the reject packet out in some cases.

Links to More Info: BT1102429

Component: Local Traffic Manager

Symptoms:
Invoking the iRule command 'reject' under the iRule event 'FLOW_INIT' may, in some cases, fail to send out the intended reject packet (i.e. TCP reset or ICMP port unreachable).

Conditions:
The issue occurs when the BIG-IP system does not have a route back to the client, and should instead deliver the reject packet by means of autolasthop.

Impact:
The connection is actually removed from the BIG-IP system's connection table, and correctly does not progress. However, the lack of a reject packet could make the client retransmit its initial packet or insist in opening more connections.


1102301-2 : Content profiles created for types other than video and image allowing executable

Component: Application Security Manager

Symptoms:
When creating "API Security" policy, "Disallow File Upload of Executables" options are disabled for contents different than video/* or image/*.

Conditions:
Create "API Security" policy with binary content URL.

Impact:
Incorrect violation is raised.

Workaround:
None


1101741-2 : Virtual server with default pool down and iRule pool up will flap for a second during a full config-sync.

Links to More Info: BT1101741

Component: TMOS

Symptoms:
During a full manual config-sync, a virtual server with a default pool which is down and an iRule pool which is up will flap for a second on the receiving unit.

For instance:

Apr 22 13:52:31 bigip-ntr-b.local notice mcpd[7733]: 01071682:5: SNMP_TRAP: Virtual /Common/my_vs has become unavailable
Apr 22 13:52:31 bigip-ntr-b.local notice mcpd[7733]: 010719e7:5: Virtual Address /Common/10.0.0.71 general status changed from GREEN to RED.
Apr 22 13:52:31 bigip-ntr-b.local notice mcpd[7733]: 010719e8:5: Virtual Address /Common/10.0.0.71 monitor status changed from UP to DOWN.
<...>
Apr 22 13:52:32 bigip-ntr-b.local notice mcpd[7733]: 01071681:5: SNMP_TRAP: Virtual /Common/my_vs has become available
Apr 22 13:52:35 bigip-ntr-b.local notice mcpd[7733]: 010719e7:5: Virtual Address /Common/10.0.0.71 general status changed from RED to GREEN.
Apr 22 13:52:35 bigip-ntr-b.local notice mcpd[7733]: 010719e8:5: Virtual Address /Common/10.0.0.71 monitor status changed from DOWN to UP.

Conditions:
-- device-group configured for full manual sync
-- virtual server with default pool up and iRule pool down
-- a config sync is initiated

Impact:
There is no impact to application traffic during the flapping, as the virtual server continues to function correctly even when the unit receiving the config-sync is the Active one.

However, the logs (and the ensuing SNMP traps) may be confusing to BIG-IP Administrators and/or network operators monitoring alarms from the system.

Workaround:
You can work around this issue by configuring the device-group for incremental config-sync instead (either manual or automatic).


1101697-4 : TLS1.3 connection failure with 0-RTT and Hello Retry Request (HRR).

Links to More Info: BT1101697

Component: Local Traffic Manager

Symptoms:
Connection failure.

Conditions:
This condition can occur when:
- The 0-RTT is enabled.
- When TLS1.3 session goes for Hello Retry Request (HRR).

Impact:
Connection failure.

Workaround:
Disable the 0-RTT.


1101653-2 : Query Type Filter in DNS Security Profile blocks allowed query types

Links to More Info: BT1101653

Component: Advanced Firewall Manager

Symptoms:
When NXDomain is moved to active/enabled, a query response does not work in the GUI.

Conditions:
NXDomain field is in enable state in filtered-query-type in GUI.

Impact:
The query response fails.

Workaround:
NXDomain field should not be enabled using the GUI.
NXDomain is always response type.


1101453-1 : MCPD SIGABRT and core happened while deleting GTM pool member

Links to More Info: BT1101453

Component: TMOS

Symptoms:
Mcpd crashes while deleting a pool member.

Conditions:
-- Huge GTM configuration
-- One pool members is referenced by 1000 wide IPs

Impact:
Traffic disrupted while mcpd restarts.

Workaround:
None


1101369-1 : MQTT connection stats are not updated properly

Component: Local Traffic Manager

Symptoms:
Negative values can be seen in current connections.

Conditions:
This issue can be seen when the 'CONNECT' message is dropped by iRule or when the first message received is not 'CONNECT.'

Impact:
MQTT profile stats are not incremented correctly with CONNECT message.

Workaround:
NA


1101321-3 : APM log files are flooded after a client connection fails.

Links to More Info: BT1101321

Component: Access Policy Manager

Symptoms:
Once a client connection fails, the var/log/apm log files get flooded with repeat error messages like "queue.cpp func: "printx()" line: 359 Msg: Queued fd"

Conditions:
When the client connection fails, for example, when the client connection is no longer valid, the log files are flooded with all queued connections which are available at that point of time.

Impact:
The continuous error messages in the log files may cause high CPU issues.

Workaround:
N/A


1101181-2 : HTTP request payload not forwarded by BIG-IP when serverside is HTTP/2 and HTTP MRF router is enabled on virtual server

Links to More Info: BT1101181

Component: Local Traffic Manager

Symptoms:
The BIG-IP forwards HTTP request headers to pool member, but does not forward the request body. This results in a connection stall, and the connection eventually timing out and failing.

Conditions:
-- Virtual server with HTTP/2 full proxy configured (HTTP MRF router is enabled, and HTTP/2 profile present on virtual server).
-- Virtual server has request-logging profile assigned.
-- Serverside connection uses HTTP/2.
-- Client sends a request that includes a payload body (e.g. a POST).

Impact:
HTTP transaction fails; traffic does not pass.

Workaround:
Remove the request-logging profile.


1100721-2 : IPv6 link-local floating self-IP breaks IPv6 query to BIND

Links to More Info: BT1100721

Component: Local Traffic Manager

Symptoms:
A IPv6 link-local floating self-IP breaks IPv6 query to BIND.

Conditions:
1. Create a DNS record in BIND.
2. Create an IPv6 floating self-IP (for example, 2002::139) and place it into traffic-group-1.
3. Create an IPv6 DNS listener using the newly created self-IP (2002::139).
So far a DNS query should be answered properly by BIND and TMM.
4. Create a dummy IPv6 floating self-IP using a link-local IP (for example, fe80::4ff:0:0:202) and place it into traffic-group-1.
Now, the DNS query from outside will be timed out.

Impact:
DNS requests will get timed out.

Workaround:
None


1100669-3 : Brute force captcha loop

Links to More Info: BT1100669

Component: Application Security Manager

Symptoms:
Captchas for a user that failed to login after several attempts will continue after a successful login.

Conditions:
-- A user fails to log in after several attempts.
-- The mitigation is captcha mitigation.

Impact:
If the user eventually provides the correct password, the user will be able to log in.

Workaround:
None


1100549-3 : "Resource Administrator" role cannot change ACL order

Links to More Info: BT1100549

Component: Access Policy Manager

Symptoms:
You encounter a 'No Access' error when trying to change ACL order

Conditions:
You are logged in with a Resource Administrator role.

Impact:
You are unable to change the ACL order

Workaround:
None


1100409-4 : Valid connections may fail while a virtual server is in SYN cookie mode.

Component: TMOS

Symptoms:
Some of the valid connections to a TCP virtual server may fail while the virtual server is in SYN cookie mode due to an attack.

Conditions:
-- BIG-IP i4x00 platform.
-- TCP virtual server under SYN flood attack.

Impact:
Failed connections, service degradation.

Workaround:
Disabling SYN cookie in the TCP or fastL4 profile is a possible workaround, but that would leave the virtual server open to SYN flood attacks.


1100393-2 : Multiple Referer header raise false positive evasion violation

Links to More Info: BT1100393

Component: Application Security Manager

Symptoms:
When Multiple Referer headers contains a backslash character ('\') in query string portion, 'IIS backslashes' evasion technique violation is raised.

Conditions:
- 'Url Normalization' is turned on and 'Evasion Techniques Violations' is enabled.
- Multiple Referer header contains a backslash character ('\') in query string part.

Impact:
False positive evasion technique violation is raised for Referer header.

Workaround:
In the HTTP Header Properties screen, turn off the 'Url Normalization' on the 'Normalization Settings' section of the 'referer' property.


1100321 : MCPD memory leak

Links to More Info: BT1100321

Component: TMOS

Symptoms:
Viewing virtual server firewall policy rules leaks some memory in MCPD.

Conditions:
- BIG-IP AFM is provisioned
- Virtual server firewall policy rules are viewed, e.g. by running one of the following commands:
  tmsh show ltm virtual fw-enforced-policy-rules
  tmsh show ltm virtual fw-staged-policy-rules

Impact:
A memory leak occurs when the command is run.

Workaround:
None


1100249-2 : SNAT with FLOW_INIT firewall rule may core TMM due to wrong type of underlying flow structure

Links to More Info: BT1100249

Component: Local Traffic Manager

Symptoms:
Tmm crashes with SIGSEGV while passing firewall traffic.

Conditions:
-- SNAT + firewall rule
-- FLOW_INIT used in an iRule

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1100197-2 : GTM sends wrong commit_id originator for iqsyncer to do gtm group sync

Links to More Info: BT1100197

Component: Global Traffic Manager (DNS)

Symptoms:
GTM sends wrong commit_id originator for iqsyncer to do gtm group sync, which converts an incremental sync into a full sync.

Conditions:
Frequent GTM group syncs.

Impact:
Unnecessary GTM full sync.

Workaround:
None


1099545-2 : Tmm may core when PEM virtual with a simple policy and iRule is being used

Links to More Info: BT1099545

Component: Local Traffic Manager

Symptoms:
Tmm cores with SIGSEGV.

Conditions:
-- PEM virtual with a simple policy and iRule attached.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1099373-2 : Virtual Servers may reply with a three-way handshake when disabled or when processing iRules

Links to More Info: BT1099373

Component: Local Traffic Manager

Symptoms:
Virtual servers may complete a three-way handshake before resetting a connection when they are disabled or when iRules process traffic for disabled virtual servers.

Conditions:
-- Virtual Server with a pool assigned
-- Pool is disabled administratively

Impact:
When a virtual server is marked as disabled and a client attempts to connect to it, tmm will normally send a reset to the first SYN packet. However, if you then administratively disable the pool ( disabled pool members - Not forced offline) tmm will complete the three-way handshake before sending resets. Additionally, when in this state, iRules will process and can pass traffic to pools if the iRule is configured to do that even though the virtual server status is disabled.

Workaround:
Avoid marking pools disabled or use forced offline for virtual servers that you want to administratively disable.


1099305-2 : Nlad core observed due to ERR_func_error_string can return NULL

Links to More Info: BT1099305

Component: Access Policy Manager

Symptoms:
The following symptoms are observed in /var/log/ltm:

err nlad[17535]: OpenSSL: DRBG Continuous RNG test failed: DRBG stuck.

Nlad core is observed
/var/log/kern.log:Apr 7 03:46:53 <vs name > info kernel: nlad[13119]: segfault at 0 ip <> sp <> error 4.

Conditions:
NLAD core is SIGSEGV - crashing while processing a SSL Certificate via a SAML login.

Impact:
Core results in disruption of APM sessions

Workaround:
None


1099229-4 : SSL does not resume/reset async LTM policy events correctly when both policy and iRules are present

Links to More Info: BT1099229

Component: Local Traffic Manager

Symptoms:
-- A connection to the virtual server hangs from the client device.
-- A memory leak occurs in tmm

Conditions:
-- Virtual server has an L7 policy configured.
-- Virtual server has iRules configured.

Impact:
-- Clients are unable to connect to the virtual server.
-- A memory leak occurs.

Workaround:
Remove the L7 policy or the iRules from the virtual server configuration.


1099193-2 : Incorrect configuration for "Auto detect" parameter is shown after switching from other data types

Component: Application Security Manager

Symptoms:
The Configuration shown in the GUI for the "Auto detect" Parameter value type is incorrect after certain steps are performed.

Conditions:
1. Create a default policy
2. Create new a Parameter with "User-input value" as a Parameter Value Type, and "File Upload" as the Data Type.
3. Save the settings above, and go back to the newly created Parameters settings.
4. Change its Parameter Value Type to "Auto detect".

Impact:
You either see unrelated fields, e.g. "Disallow File Upload of Executables" or missing tabs, like Value Meta Characters.

Workaround:
You can save a configuration with "User-input value" as a Parameter Value type, and "Alpha-Numeric" as Data Type, and then set "Auto detect" as Parameter Value Type.


1098837-1 : Configuration failure due to the DB validation exception happening in the ips_inspection_sig and ips_inspection_compl tables

Links to More Info: BT1098837

Component: Protocol Inspection

Symptoms:
During the upgrade, configuration error with reason DB validation exception occurs and unique constraint violation in the tables ips_inspection_sig and ips_inspection_compl.

Conditions:
During the upgrade of the device, there should not be a configuration error with a DB exception message.

Impact:
Some of the signatures and compliances will not load into the MCPD database tables ips_inspection_sig and ips_inspection_compl respectively.

Workaround:
Store the details of the signatures and compliances into the file and run the following command:

 "tmsh load sys config merge filename"


1098609-4 : BD crash on specific scenario

Component: Application Security Manager

Symptoms:
BD crashes while passing traffic.

Conditions:
Specific request criterias that happens while there is a configuration change.

Impact:
Traffic disrupted while bd restarts.

Workaround:
None


1097853-1 : Session Tracking screen may be missing the scroll bar after saving the configuration

Component: Application Security Manager

Symptoms:
After pressing the Save button, the page may be refreshed without the ability to scroll down.

Conditions:
1. Go to Security ›› Application Security : Session Tracking screen.

2. Change the configuration, for example choose 'Use individual Login Pages' and move the login URL from available to Selected (under Session Tracking Configuration section).

3. Save.

Impact:
After the page is refreshed, the scroller may be not available.

Workaround:
Refresh the page again, and the scroll bar returns.


1096893-1 : TCP syncookie-initiated connections may end up unexpectedly IP-fragmenting packets mid-connection

Links to More Info: BT1096893

Component: Local Traffic Manager

Symptoms:
When route metrics are applied by the TCP filter to a connection initiated by a syncookie, TCP sets the effective MSS for packetization, thereafter the egress_mtu will be set as per the route metrics entry, if present. The packets falling between the effective MSS and the lowered egress_mtu end up being unexpectedly IP-fragmented.

Conditions:
SYN cookies enabled and activated. A route metrics PMTU entry for the destination address that is smaller than the VLAN's egress MTU.

Impact:
Application traffic can fail or see disruption due to unexpected IP fragmentation.

Workaround:
Disable syn cookies (Reference: https://support.f5.com/csp/article/K80970950).

Alternatively, you can apply a lower static MTU to the interface.


1096461-5 : TACACS system-auth Accounting setting has no effect when set to send-to-all-servers/send-to-first-server

Links to More Info: BT1096461

Component: TMOS

Symptoms:
If the destination address is a single server, then the accounting info is sent to only the particular server.
If the destination has multiple servers, then the accounting info is sent to all servers irrespective of the setting "auth tacacs system-auth accounting"

Conditions:
Select multiple destination addresses and change the "auth tacacs system-auth accounting" to send-to-first-server, the accounting information is sent to all the destination servers.

Impact:
You are unable to use send-to-first server functionality

Workaround:
None


1096317-4 : SIP msg alg zombie flows

Links to More Info: BT1096317

Component: Carrier-Grade NAT

Symptoms:
The SIP msg alg can disrupt the expiration of a connflow in a way that it stays alive forever.

Conditions:
SIPGmsg alg with suspending iRule commands attached.

Impact:
Zombie flow, which cannot be expired anymore.

Workaround:
Restart TMM.


1096165-4 : Tmm cored for accessing the pool after the gtm_add command is run

Links to More Info: BT1096165

Component: Global Traffic Manager (DNS)

Symptoms:
Tmm can crash

Conditions:
TMM process fails seconds after the gtm_add command is run.

Impact:
On very rare occasions, TMM can crash. Traffic disrupted while tmm restarts.

Workaround:
Reduce the number of pools and the number of region records.


1095989-1 : PEM behaviour on receiving CCA with result code: 4012 and FUA on the Gy interface

Links to More Info: BT1095989

Component: Policy Enforcement Manager

Symptoms:
PEM received Radius Acct req, and sent Both Gx Gy Interface CCR. When receiving Gy CCA Multi-Services-Credit-Control.Result-code:4012 (Diameter_Credit_Limit_Reached),Final-Unit-Action (Redirect) and "Redirect-Server-address" is NOT installed on the PEM session.

Conditions:
Session quota information is passed from OCS to PCEF on the Gy interface.

Impact:
The action specified in FUI does not get applied to the session. Quota management will not work properly for the session.


1095973-3 : Config load failure when Trusted CA Bundle is missing and URL is present in the Bundle Manager

Links to More Info: BT1095973

Component: TMOS

Symptoms:
1. BIG-IP will come up but there will be a config load failure.
2. During the upgrade, config sync issues occur.

Conditions:
1. Bundle Manager contains URL( exclude-url/include-url)
2. Trusted CA Bundle is not populated in the Bundle Manager.

Impact:
1. BIG-IP will be in "Inoperative"/"Not All Devices Synced" state

Workaround:
Add the Trusted CA Bundle (default ca-bundle.crt) to the Bundle Manager.

OR

Remove the URLS (both exclude-url and include-url) from the Bundle Manager.


1095909-1 : DEBUG_NOTICE macro truncating log messages of size more than 1024

Links to More Info: BT1095909

Component: Access Policy Manager

Symptoms:
Truncated log messages are found in /var/log/apm

Conditions:
APM session variables that are large (e.g., policy_path, configVariableCatalogSessionKey)

Impact:
Some of the APM session variables are missing from /var/log/apm


1095217-1 : Peer unit incorrectly shows the pool status as unknown after merging the configuration

Links to More Info: BT1095217

Component: TMOS

Symptoms:
The peer unit incorrectly shows the state of pool members as "checking" after merging the configuration from the terminal.

Conditions:
This is encountered if 2 or more configurations are specified for an already configured pool on the peer device when using the "tmsh load sys config merge from-terminal" command.

For example:

Existing pool:

ltm pool http_pool {
  members {
    member1:http {
      address 10.82.243.131
      monitor http
    }
  }
}

tmsh load sys config merge from-terminal:

ltm pool http_pool {
  members none
}
ltm pool http_pool {
  members replace-all-with {
    member1:http {
      address 10.82.243.131
      monitor http
    }
  }
}

Impact:
Pool members are marked with a state of "Checking".

Workaround:
Define all object properties at once (in a single configuration block) instead of multiple times (in multiple configuration blocks) when merging the configuration from the terminal.


1095205-4 : Config.auditing.forward.multiple db Variable with value "none" is not working as expected with multiple destination addresses in audit_forwarder.

Links to More Info: BT1095205

Component: TMOS

Symptoms:
When config.auditing.forward.multiple db is set to none, BIG-IP should restrict the system to send it to only one destination when multiple destination addresses are configured.

Conditions:
When configured to "none", logs are broadcasted to all the destination addresses. Working as "broadcast" mode.

Impact:
End user could not use "none" functionality


1095185-2 : Failed Configuration Load on Secondary Slot After Device Group Sync

Links to More Info: BT1095185

Component: Application Security Manager

Symptoms:
Configuration synchronization fails on secondary slots after the primary slot receives a full sync from a peer in a device group.

Conditions:
Bladed chassis devices are configured in an ASM enabled device group

Impact:
Incorrect enforcement on secondary slots.

Workaround:
None


1095145-3 : Virtual server responding with ICMP unreachable after using /Common/service

Links to More Info: BT1095145

Component: SSL Orchestrator

Symptoms:
After adding /Common/service profile and removing it from the virtual server, the virtual server starts dropping traffic with ICMP unreachable.

This profile is normally only needed in SSLo deployments.

Conditions:
/Common/service was attached and removed from a virtual server.

Impact:
Traffic is dropped on a virtual server.

Workaround:
Restart TMM after making the configuration change.


1095041-2 : ASM truncates cookies that contain a space in the name and TS cookie as part of cookie list.

Links to More Info: BT1095041

Component: Application Security Manager

Symptoms:
HTTP requests are truncated at the cookie and raise a violation.

Conditions:
-- Cookie list contains TS cookie
-- A cookie contains a space in the name
-- TS cookie stripping is enabled (db asm.strip_asm_cookies is set as true)

Impact:
Backend server does not receive a complete cookie.

Workaround:
Sys db asm.strip_asm_cookies is set as false.


1094069-1 : iqsyncer will get stuck in a failed state when requesting a commit_id that is not on the target GTM

Links to More Info: BT1094069

Component: Global Traffic Manager (DNS)

Symptoms:
Too many GTM sync requests are exchanged with the devices and and the config sync may fail sometimes.

Conditions:
DNS/GTM licensed devices are configured in a sync Group. The requested commit_id is not present anymore on the target GTM device.

Impact:
Sync operations are extremely slow (5-8 minutes for a pool to show up) which may fail sometimes. Excessive network traffic.

Workaround:
None


1093973-7 : Tmm may core when BFD peers select a new active device.

Links to More Info: BT1093973

Component: TMOS

Symptoms:
Tmm cores.

Conditions:
-- BFD is in use
-- the active/owner BFD device changes

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1093717-1 : BGP4 SNMP traps are not working.

Links to More Info: BT1093717

Component: TMOS

Symptoms:
BGP4 SNMP traps are not working and returning snmpwalk result of "BGP4-MIB::bgp = No Such Object available on this agent at this OID" or similar errors for all OIDs under the .1.3.6.1.2.1.15 MIB.

Conditions:
--Perform any BGP related event and check for snmp traps.
--Run snmpwalk -Of -Os -v 2c -c <community_name> localhost .1.3.6.1.2.1.15

Impact:
No BGP monitoring.

Workaround:
None


1093553-4 : OSPF "default-information originate" injects a new link-state advertisement

Links to More Info: BT1093553

Component: TMOS

Symptoms:
When configured with "default-information originate", the BIG-IP system might inject a new 0.0.0.0 link-state advertisement when receiving a default route from an OSPF neighbor.

This results in two 0.0.0.0 link-state advertisements being advertised from the box.

Conditions:
"default-information originate" is configured.

Impact:
Duplicate link-state advertisements

Workaround:
None


1093545-4 : Attempts to create illegal virtual-server may lead to mcpd crash.

Links to More Info: BT1093545

Component: Local Traffic Manager

Symptoms:
Mcpd crashes after the creation of virtual server with incorrect or duplicate configuration is attempted.

Conditions:
-- One or more attempts to create a virtual server with an illegal configuration are performed (i.e. attempts to create a virtual server that shares a configuration with an existing virtual server or has an incorrect configuration)

Impact:
Mcpd crashes with __GI_abort. Traffic disrupted while mcpd restarts.

Workaround:
None


1093357-4 : PEM intra-session mirroring can lead to a crash

Links to More Info: BT1093357

Component: Policy Enforcement Manager

Symptoms:
TMM crashes while passing PEM traffic

Conditions:
-- PEM mirroring enabled and passing traffic

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1093313-2 : CLIENTSSL_CLIENTCERT iRule event is not triggered for TLS1.3 when the client sends an empty certificate response

Links to More Info: BT1093313

Component: TMOS

Symptoms:
When an SSL client connects to the BIG-IP system using TLS 1.3 and sends an empty certificate, the CLIENTSSL_CLIENTCERT iRule event is not triggered.

Conditions:
-- Virtual server configured on BIG-IP with SSL and iRule added
-- Client authentication for client certificates is set to "request"
-- iRule relying on CLIENTSSL_CLIENTCERT
-- A client connects to BIG-IP using TLSv1.3 protocol without a certificate(empty certificate)

Impact:
CLIENTSSL_CLIENTCERT irules aren't triggered.

Workaround:
None


1093061-2 : MCPD restart on secondary blade during hot-swap of another blade

Links to More Info: BT1093061

Component: Local Traffic Manager

Symptoms:
In rare instances, inserting a new blade into a VIPRION system can trigger a config error on another secondary blade due to attempting to delete the old blade's physical disk while it is still "in use":
err mcpd[7965]: 01070265:3: The physical disk (S3F3NX0J902788) cannot be deleted because it is in use by a disk bay (1).
err mcpd[7965]: 01070734:3: Configuration error: Configuration from primary failed validation: 01070265:3: The physical disk (S3F3NX0J902788) cannot be deleted because

This causes MCPD to restart on the secondary blade due to the config error.

Conditions:
-- VIPRION system with at least 3 blades
-- Remove a blade and replace it with a different one

Impact:
-- MCPD restarts on the secondary blade other than the blade that was replaced.

The config error triggering this is due to an issue with the cluster syncing process between blades; however, the config issue is temporary, and should be resolved after mcpd restarts on the secondary blade.

Workaround:
None


1092965-2 : Disabled "Illegal Base64 value" violation is detect for staged base64 parameter with attack signature in value

Component: Application Security Manager

Symptoms:
An "Illegal Base64 value" violation will be reported for a staged parameter even though Alarm/Blocking/Learning is disabled for this violation.

Conditions:
- A parameter has to be set to staging mode with base64 decoding.
- The Alarm/Blocking/Learning flags has to be disabled for the violation "Illegal Base64 value".
- The incoming request has to have the defined parameter in QS with an attack signature that is not base64 encoded in the parameter value.

Impact:
The violation "Illegal Base64 value" is reported.

Workaround:
None


1091969-3 : iRule 'virtual' command does not work for connections over virtual-wire.

Links to More Info: BT1091969

Component: Local Traffic Manager

Symptoms:
iRule 'virtual' command does not work for connections over virtual-wire.

Conditions:
- Connection over a virtual-wire.
- Redirecting traffic to another virtual-server (for example, using an iRule 'virtual' command)

Impact:
Connection stalls on the first virtual-server and never completes.


1091785-2 : DBDaemon restarts unexpectedly and/or fails to restart under heavy load

Links to More Info: BT1091785

Component: Local Traffic Manager

Symptoms:
While under heavy load, the Database monitor daemon (DBDaemon) may:
- Restart for no apparent reason
- Restart repeatedly in rapid succession
- Log the following error while attempting to restart:
   java.net.BindException: Address already in use (Bind failed)
- Fail to start (remain down) after several attempts, leaving database monitors disabled and marking monitored resources Down.

Conditions:
- One or more active GTM and/or LTM database monitors are configured with short probe-timeout, interval and timeout values (for example, 2, 5, or 16 respectively).
- A large number (for example, 2,000) of GTM and/or LTM database monitor instances (combinations of above monitor and pool member) are configured.
- Active GTM and/or LTM database monitors are configured with debug yes and/or count 0.

Impact:
The DBDaemon restarts for no apparent reason.
The DBDaemon fails to start (remain down) after several attempts, leaving database monitors disabled and marking monitored resources Down.

Workaround:
The conditions that are suspected to cause these symptoms include effects of ID1025089. Measures to prevent or reduce occurrences of ID1025089 (by reducing database monitor workload) will likely also prevent or reduce occurrences of these symptoms.

If the DBDaemon fails to restart, the following steps may allow DBDaemon to restart successfully upon the next database monitor probe:

-- Check for a running instance of DBDaemon with the following command:

ps ax | grep -v grep | grep DBDaemon

-- If DBDaemon is running, this command will return a set of parameters including the numerical process ID (PID) at the beginning of the line and a command line that begins with "/usr/lib/jvm/jre/bin/java" and includes the parameter "com.f5.eav.DBDaemon", such as:

24943 ? Ssl 46:49 /usr/lib/jvm/jre/bin/java -cp /usr/lib/jvm/jre/lib/rt.jar:/usr/lib/jvm/jre/lib/charsets.jar:/usr/share/monitors/postgresql-jdbc.jar:/usr/share/monitors/DB_monitor.jar:/usr/share/monitors/log4j.jar:/usr/share/monitors/mssql-jdbc.jar:/usr/share/monitors/mysql-connector-java.jar:/usr/share/monitors/ojdbc6.jar -Xmx512m -Xms64m -XX:-UseLargePages -DLogFilePath=/var/log/DBDaemon-0.log com.f5.eav.DBDaemon 1521 24943 0

-- If a running DBDaemon process is identified, use the "kill" command to terminate the running DBDaemon process:

kill #
(where # is the DBDaemon PID from the above "ps" command)

-- Repeat the above "ps" command to confirm that the DBDaemon process has been terminated. If a new DBDaemon process has not been started (with a different PID), proceed to the next steps.

-- Check the /var/run directory for the presence of any files with names beginning with "DBDaemon", such as:

/var/run/DBDaemon-0.lock
/var/run/DBDaemon-0.pid
/var/run/DBDaemon-0.start.lock

Note: The numeric value in the above example filenames corresponds to the Route Domain of pool members monitored by database monitors. If the database monitors are only applied to pool members in the default route domain (RD 0), that value will be "0" as seen above. If database monitors are applied to pool members in a non-default route domain (RD 7, for example), the numeric value will correspond to that route domain, such as:
/var/run/DBDaemon-7.lock
/var/run/DBDaemon-7.pid
/var/run/DBDaemon-7.start.lock

-- If no DBDaemon process is running, delete any /var/run/DBDaemon* files. It is especially important to delete:
/var/run/DBDaemon-#.start.lock (indicates DBDaemon restart is in progress and that no further restart actions should be attempted)
/var/run/DBDaemon-#.pid (indicates current DBDaemon PID)

-- If the above actions do not result in DBDaemon restarting upon the next database monitor ping, then a complete BIG-IP restart will likely be required to recover from unknown conditions within the Java subsystem that may prevent successful DBDaemon operation:

bigstart restart

or:

reboot


1091725-4 : Memory leak in IPsec

Links to More Info: BT1091725

Component: TMOS

Symptoms:
Slow memory growth of tmm over time.

This leak affects both the active and standby BIG-IPs.

Conditions:
IPsec is in use.

Security associations are being created or recreated.

Impact:
Over time, tmm may exhaust its memory causing a tmm crash.


1091509-3 : SAML Artifact resolution service fails to resolve artifacts on same IP after reboot

Links to More Info: BT1091509

Component: Access Policy Manager

Symptoms:
Unable to authenticate, following error message in the APM log will occur:

<DATE> <HOSTNAME> err apmd[13026]: 0149021a:3: /Common/SPTesting_ap:Common:524ba34e: SAML Agent: /Common/SPTesting_ap_act_saml_auth_ag failed to process SAML artifact, error: Failed to resolve Artifact
<DATE> <HOSTNAME> err apmd[13026]: 01490000:3: modules/Authentication/Saml/SamlSPAgent.cpp func: "sendSAMLArtifactResolveRq()" line: 6328 Msg: Failed to connect to artifact resolution service. Error (56): Failure when receiving data from the peer
<DATE> <HOSTNAME> err apmd[13026]: 01490000:3: modules/Authentication/Saml/SamlSPAgent.cpp func: "resolveSAMLArtifact()" line: 6380 Msg: Error resolving artifact

Conditions:
- APM as SP with Artifact Resolution
- ARS service uses internal IP
- Configured serverssl profile for Artifact Resolution Service in IDP connector

Impact:
ARS will fail to resolve and users will not be able to authenticate.

Workaround:
Disable the 'serverssl-profile-name' in the IDP connector configuration.


1091505 : In AGC 8.0 you cannot choose from existing SSL profiles

Links to More Info: BT1091505

Component: iApp Technology

Symptoms:
In AGC, during Zero Trust >> Identity Aware Proxy configuration, in the Virtual Server Properties, the Client SSL Profile has the Use Existing selected by default and the drop-down is used to select a profile.

Profiles created at Local Traffic ›› Profiles : SSL : Client are not available in this drop-down.

Conditions:
You wish to assign a different SSL profile to the virtual server.

Impact:
SSL profiles created at Local Traffic ›› Profiles : SSL : Client are not available in the drop-down in AGC.

Workaround:
Create a SSL profile while in the AGC using the Create New option in drop-down and this will be available in future deployments.


1091021-2 : The BIG-IP system may take no fail-safe action when the bigd daemon becomes unresponsive.

Links to More Info: BT1091021

Component: Local Traffic Manager

Symptoms:
You may observe LTM monitors are malfunctioning on your system. For instance, you may notice some probes are not sent out on the network, and some monitored objects are showing the wrong status.

Conditions:
-- The bigd daemon consists of multiple processes (which you can determine by running "ps aux | grep bigd").

-- One or more of the processes (but not all of them) becomes disrupted for some reason, and stops serving heartbeats to the sod daemon.

Under these conditions, sod will not take any fail-safe action and the affected bigd processes will continue running impaired, potentially indefinitely.

Impact:
LTM monitoring is impacted.

Workaround:
If you have determined, or if you suspect, this issue is present on your system, you can resolve it by killing all bigd processes using the following command:

pgrep -f 'bigd\.[0-9]+' | xargs kill -9

However, this does not prevent the issue from manifesting again in the future if the cause for bigd's disruption occurs again.

Monitoring may become further disrupted as bigd restarts, and a failover may occur depending on your specific configuration.


1090441-1 : IKEv2: Add algorithm info to SK_ logging

Links to More Info: BT1090441

Component: TMOS

Symptoms:
Shared key logs do not contain the authentication and encryption algorithm name

Conditions:
When sys-db "ipsec.debug.logsk" is enabled, the shared keys are logged for debugging purpose, but it does not contain the algorithm names.

Impact:
The encryption algorithm name is not included in the logs.

Workaround:
None


1090313-3 : Virtual server may remain in hardware SYN cookie mode longer than expected

Links to More Info: BT1090313

Component: TMOS

Symptoms:
A virtual server may remain in hardware SYN cookie mode longer than expected after the SYN flood attack has stopped. The TMSH 'show ltm virtual' command shows that the virtual has already exited SYN Cookie mode, but the SYN packets are still responded from hardware for a few minutes longer.

Conditions:
The problem is a result of a race condition in TMM, so the issue might show up intermittently.

Impact:
Discrepancy between the actual SYN Cookie mode and the reported SYN Cookie mode for a short period of time after a SYN flood attack.

Workaround:
Disable hardware SYN Cookie mode.


1089853-2 : "Virtual Server" or "Bot Defense Profile" links in Request Details are not working

Component: Application Security Manager

Symptoms:
Nothing happens when you click the link for "Virtual Server" or "Bot Defense Profile" in request details on "Security ›› Event Logs : Bot Defense : Bot
Requests" page.

Conditions:
1. Go to Security ›› Event Logs : Bot Defense : Bot
Requests" page and click a Bot Request for details.
2. If "Virtual Server" or "Bot Defense Profile" has a hyperlink, the link does not work.

Impact:
You cannot reach the related pages of Virtual Server or Bot Profile details

Workaround:
Right-click one of the links above - and choose to open it in a new tab or new window.


1089829-3 : PEM A112 15.1.5.0.69.10 - Constant SIGSEGV cores on both peers

Links to More Info: BT1089829

Component: Policy Enforcement Manager

Symptoms:
SIGSEGV tmm cores with back trace in PEM area.
"pem_sessiondump --list" command will show session with custom attribute name as empty/NULL.

Conditions:
Setting pem session custom attribute value with length more than (1024- attribute name length).

Impact:
Traffic disrupted while tmm restarts.

Workaround:
In the iRule, make sure the custom attribute value size + custom attribute name length is not more than 1024.


1089685-1 : [APM]Webtop loading issue when 'oneconnect' profile is attached to a virtual server

Links to More Info: BT1089685

Component: Access Policy Manager

Symptoms:
The webtop hangs intermittently.

Conditions:
-- Virtual server with 'oneconnect' profile
-- BIG-IP Version v16.1.2.1

Impact:
Unable to use resources on webtop

Workaround:
Removing 'oneconnect' profile from virtual server resolves this issue.


1089293 : Backend password reset is not working in Webtop when sso is disabled.

Links to More Info: BT1089293

Component: Access Policy Manager

Symptoms:
Backend password change does not work if initial credential (username) is different than the credential used for backend VMware servers.

Conditions:
1) Logon to APM webtop with user1
2) Go to VMware server application login with different user like user2, before that set the password reset option for user2 in AD
3) once the password reset is clicked you encounter an error " login to your resource failed)"

Impact:
User is unable to reset password, if the credentials are expired for backend VMware servers.

Workaround:
None


1089101-2 : Apply Access Policy notification in UI after auto discovery

Links to More Info: BT1089101

Component: Access Policy Manager

Symptoms:
"apply access policy notification" pops up in GUI

Conditions:
1. OAuth auto discovery is enabled for OAuth provider
2. The relevant access policy has macros in it.

Impact:
Traffic may fail until "apply access policy" is clicked manually

Workaround:
Access policy can be modified to not have macros in it.


1089005-4 : Dynamic routes might be missing in the kernel on secondary blades.

Links to More Info: BT1089005

Component: TMOS

Symptoms:
Dynamic routes might be missing in the kernel on secondary blades.

Conditions:
- Long VLAN names (16+ characters).
- MCPD unable to load configuration from binary database (software update/forceload was performed).

Impact:
Kernel routes are missing on secondary blades.

Workaround:
Restart tmrouted on the affected secondary blade. Note, this will also briefly affect TMM dynamic routes.
<bigstart restart tmrouted>


1088597-2 : TCP keepalive timer can be immediately re-scheduled in rare circumstances

Links to More Info: BT1088597

Component: Local Traffic Manager

Symptoms:
In rare circumstances, the TCP timer is rescheduled immediately due to the utilization of the interval encompassing also the idle_timeout.

Conditions:
Virtual Server with:

- TCP Profile
- SSL Profile with alert timeout configured

Another way this can occur is by manually deleting connections, which effectively only sets the idle timeout to 0.

Impact:
High CPU utilization potentially leading to reduced performance.

Workaround:
If the alert timeout is not re-enabled in the SSL Profile that should be sufficient.


1088429-4 : Kernel slab memory leak

Links to More Info: BT1088429

Component: TMOS

Symptoms:
The Linux kernel unreclaimable slab leaks kmalloc-64 (64 byte) allocations due to an issue with ext4 filesystem code.

The kmalloc-64 leaks occur when specific operations are executed on ext4 filesystems, such as copy of file with extended attribute preservation.

Red Hat have documented the issue, refer to the links below.
Note: Red Hat account with appropriate access are required to view these pages.

Posix ACL object is leaked in setattr and fsetxattr syscalls
https://access.redhat.com/solutions/4967981.

This issue is tracked by Red Hat as bug 1543020
https://bugzilla.redhat.com/show_bug.cgi?id=1543020.

Conditions:
This usually happens a small amount, such as 100MB over a year on most systems.

On some systems memory use can grow much faster and the precise file manipulations that might do this are not known at this time.

Impact:
Kernel unreclaimable slab memory grows over time. This will be growth of what F5 term host memory, and will appear as increased other and/or swap memory on memory graphs.

Usually the amount leaked is quite small and has no impact.

If large enough this may leave system with too little host memory and trigger typical out of memory symptoms such as:
  
  - sluggish management by TMUI (GUI) and CLI shell
  - possible invocation of oom-killer by kernel leading to termination of a process
  - if severe, the system may thrash and become unstable, leading to cores and possibly reboot.

The amount of slab usage can be tracked with the following commands executed from the advanced shell (bash).

# cat /proc/meminfo | grep ^SUnreclaim
SUnreclaim: 46364 kB

The precise use of slab memory by component can be viewed using:

/bin/slabtop --once

Note: This includes both reclaimable and unreclaimable slab use. High reclaimable slab is usually not a concern because as host memory gets filled it can be freed (reclaimed).
Look for the amount of memory in use by kmalloc-64. There will be some use even without the leak documented here. The amount can be compared with free or easily freeable host memory, a good estimate of which is given by the following command:

 # cat /proc/meminfo | grep ^MemAvailable
MemAvailable: 970852 kB

Workaround:
None


1088389-2 : Admin to define the AD Query/LDAP Query page-size globally

Links to More Info: BT1088389

Component: Access Policy Manager

Symptoms:
The page-size is fixed value in LDAP and AD query.

Earlier the value was 1000 and later increased to 2048, after the increase in the value the session got failed as the AD Servers are configured with lesser value.

Require a configurable page-size.

Conditions:
As the latest page-size value is 2048 the AD Query/LDAP Query with the same may have problem with the AD server whose configured/supported value is 1000 which is lower than 2048.

Impact:
AD/LDAP may fail due to the page-size issue.

Workaround:
None


1088173-2 : With TLS 1.3, client Certificate is stored after HANDSHAKE even if retain-certificate parameter is disabled in SSL profile

Links to More Info: BT1088173

Component: Local Traffic Manager

Symptoms:
Log files indicate that the client certificate is retained when it should not be.

Conditions:
Enable TLS 1.3 and disable retain-certificate parameter in SSL profile

Impact:
Storage of client certificates will increase memory utilization.

Workaround:
None


1088037-3 : VELOS platform's cmp hash has been updated to handle only even ephemeral port numbers

Links to More Info: BT1088037

Component: TMOS

Symptoms:
The VELOS platform's cmp hash has been updated to handle only even ephemeral port numbers.
Use `tmsh list/modify net vlan vlan-XYZ dag-adjustment` to view or change the settings.
The recommended and default setting is xor-5mid-xor-5low.

Conditions:
- only even port numbers are used (usually by a Linux client)

Impact:
- only even TMM threads are processing traffic

Workaround:
None


1087569-4 : Changing max header table size according HTTP2 profile value may cause stream/connection to terminate

Links to More Info: BT1087569

Component: Local Traffic Manager

Symptoms:
BIG-IP initializes HEADER_TABLE_SIZE to the profile value and thus when it exceeds 4K (RFC default), the receiver's header table size is still at the default value. Therefore, upon receiving header indexes which has been removed from its table, receiver sends GOAWAY (COMPRESSION_ERROR)

Conditions:
-- HTTP2 profile used in a virtual server
-- In the HTTP2 profile, 'Header Table Size' is set to a value greater than 4096

Impact:
Stream/connection is terminated with GOAWAY (COMPRESSION_ERROR)

Workaround:
Issue can be avoided by restoring the header-table-size value to the default of 4096


1087005-2 : Application charset may be ignored when using Bot Defense Browser Verification

Links to More Info: BT1087005

Component: Application Security Manager

Symptoms:
In some cases, when using Bot Defense Browser Verification, the application <meta charset> tag may be ignored.

Conditions:
-- Bot Defense Profile is attached to a virtual server.
-- Bot Defense "Browser Verification" is configured to "Verify Before Access" or "Verify After Access"
-- Backend application uses non-standard charset.

Impact:
Random meta chars are viewed in the web page.

Workaround:
Run the command:
tmsh modify sys db dosl7.parse_html_inject_tags value "after,body"


1086517-2 : TMM may not properly exit hardware SYN cookie mode

Links to More Info: BT1086517

Component: TMOS

Symptoms:
Due to a race condition, when one TMM exits SYN cookie mode, another may immediately re-enter hardware SYN cookie mode, keeping the virtual server in SYN cookie mode and the mitigation offloaded to hardware. The SYN cookie status of the virtual server is not properly updated and will show 'not-activated'.

Conditions:
Hardware SYN cookie protection is enabled and SYN cookie mode is triggered.

Impact:
A virtual server that once entered hardware SYN cookie mode may remain in that state indefinitely. The reduced MSS size may affect performance of that virtual server.

Workaround:
Disable hardware SYN cookie either locally via the TCP or FastL4 profile, or globally by the PvaSynCookies.Enabled BigDB variable. Software SYN cookie mode is unaffected.


1086473-3 : BIG-IP resumes a TLS session on the client-side but then proceeds to do a full handshake

Links to More Info: BT1086473

Component: Local Traffic Manager

Symptoms:
When a client attempts to resume the TLS session using the Session-ID in its Client Hello from a previous session, the BIG-IP agrees by using the same Session-ID in its Server Hello, but then proceeds to perform a full handshake (Server Hello, Certificate, Server Key Exchange, Certificate Request, Server Hello Done) instead of an abbreviated handshake (Server Hello, Change Cipher Spec, Server Hello Done).

This is a violation of the TLS RFC.

Conditions:
- High availability (HA) pair of two BIG-IP units.
- LTM virtual server with a client-ssl profile.
- Mirroring enabled on the virtual server

Impact:
Client-side TLS session resumption not working.

Workaround:
Disable mirroring on the virtual server


1086393-1 : Sint Maarten and Curacao are missing in the GTM region list

Links to More Info: BT1086393

Component: TMOS

Symptoms:
Sint Maarten and Curacao are missing in the GTM region list.

Conditions:
- Create a GTM region record.
- Create a GTM region of Country Sint Maarten or Curacao.

Impact:
Cannot select Sint Maarten and Curacao from the GTM country list.

Workaround:
None


1085837-2 : Virtual server may not exit from hardware SYN cookie mode

Links to More Info: BT1085837

Component: TMOS

Symptoms:
Once a virtual server enters hardware SYN cookie mode it may not exit until a TMM restart.

Conditions:
-- On B2250 and B4450 platforms.
-- A condition triggers SYN cookie mode and then goes back to normal.

Impact:
-- Virtual servers in hardware SYN cookie mode do not receive TCP SYN packets.
-- The limited number of possible TCP MSS values may have a light performance impact.

Workaround:
Disable hardware SYN cookie mode on the affected objects.


1085805-2 : UCS restore with SSL Orchestrator deployed fails due to multiple iFiles and incorrect iFile reference.

Component: TMOS

Symptoms:
The UCS restore process with SSL Orchestrator deployment fails due to multiple iFiles. This happens because the UCS restore process does not clean up the existing iFile belonging to SSL Orchestrator. On restore, the BIG-IP system contains two iFiles, one created as a part of the UCS and the other existing iFile belonging to SSL Orchestrator.

Additionally, the path in the rest storage referencing the iFile object does not get updated.

In the bigip.conf, the iFile version does not point to the iFile that is restored as part of the UCS restore process.

To check the reference in restDB use the following https://<<MGMT-IP>>/mgmt/tm/sys/file/ifile/~Common~ssloF_global.app~SSL OrchestratoriFile?options=-hidden.

new bug was created https://bugzilla.olympus.f5net.com/show_bug.cgi?id=1185001 for iFile reference issue in bigip.conf file ,issue caused by save/sys/config call triggered from SSL Orchestrator code base.

Conditions:
-- UCS contains SSL Orchestrator deployment
-- iFile version number in the UCS and on the BIG-IP before restoring the UCS is different.
-- Multiple iFile which belongs to SSL Orchestrator after restore. This can be verified by executing the below command on the box
ll /config/filestore/files_d/Common_d/ifile_d/ | grep SSL Orchestrator

Impact:
-- Error in the SSL Orchestrator UI.
-- You are unable to make changes through the SSL Orchestrator UI.

Workaround:
Mitigation depends on the user state.

State 1: when you know that a restore will cause multiple iFile creation, use the following.

Before restoring the UCS file, perform the following steps:

a) Delete the iFile object using the following command. Do not create any configuration using SSL Orchestrator UI after deleting the iFile.

tmsh delete sys application service ssloF_global.app/ssloF_global

b) Restore the UCS.


State 2: when you already tried the UCS restore and it is in an error state, use the following

a) On UCS restore when the system is in an error state, use the following command to verify multiple files:
ll /config/filestore/files_d/Common_d/ifile_d/ | grep SSL Orchestrator

b) Use the following commands, to delete the multiple iFiles:
tmsh delete sys application service ssloF_global.app/ssloF_global

rm -fr /config/filestore/files_d/Common_d/ifile_d/\:Common\:ssloF_global.app\:SSL OrchestratoriFile_*

c) Restore the UCS


1085661-1 : Standby system saves config and changes status after sync from peer

Links to More Info: BT1085661

Component: Application Security Manager

Symptoms:
After running config sync from an Active to a Standby device, the sync status is in SYNC for a short period time.
After a while, it automatically goes to Changes Pending status.

The same symptom was reported via ID698757 and fixed in earlier versions, but the same can happen via different scenario.

Conditions:
Create an ASM policy and let the system determining language encoding from traffic.

Impact:
The high availability (HA) configuration goes out of SYNC.

Workaround:
To prevent the issue from happening, you can manually configure language encoding


1085597-1 : IKEv1 IPsec peer cannot be created in config utility (web UI)

Links to More Info: BT1085597

Component: TMOS

Symptoms:
It is not possible to configure an IKE peer using the web UI.

Conditions:
-- Configuring an IKEv1 peer
-- Using the configuration utility (web UI)

Impact:
Configuration cannot be created.

Workaround:
Use the tmsh shell to create the ike-peer config.


1084965-3 : Low visibility of attack vector

Links to More Info: BT1084965

Component: Local Traffic Manager

Symptoms:
The DoS vector FIN 'Only Set' is not triggered and causes lack of visibility of the attack vector.

Conditions:
-- Using BIG-IP Virtual Edition

Impact:
There is reduced visibility of possible attacks on the BIG-IP.

Workaround:
Check 'drop_inv_pkt' with the tmctl table, "tmm/ndal_rx_stats".


1084901-1 : Updating the firewall rule list for IPv6 with route domain throws an error in the GUI, works from tmsh

Links to More Info: BT1084901

Component: Advanced Firewall Manager

Symptoms:
You are unable to modify IPV6 + Route domain for Network Firewall Rule Lists using the GUI

Conditions:
-- AFM is provisioned
-- IPv6 with route domain is being used in an address list

Impact:
Unable to create/manage Firewall rule lists for IPv6 with a route domain.

Workaround:
Use tmsh to create/manage firewall rule lists for IPv6 with a route domain.


1084857-2 : ASM::support_id iRule command does not display the 20th digit

Links to More Info: BT1084857

Component: Application Security Manager

Symptoms:
ASM::support_id iRule command does not display the 20th digit.

A support id seen in REST/TMUI that has 20 digits, e.g 13412620314886537617 is displayed as 1341262031488653761 with the iRule command ( the last digit '7' is stripped ).

Conditions:
ASM::support_id iRule command

Impact:
Inability to trace request events using the support id


1084133-1 : At device level ICMP frags are not counting for BA and BD

Links to More Info: BT1084133

Component: Advanced Firewall Manager

Symptoms:
BD stats are not counting due to this attack was not opened at BD level.

Conditions:
Configure BD for ICMP at device level.

Impact:
Stats not incrementing and attack will not be detected.

Workaround:
None


1083621-1 : The virtio driver uses an incorrect packet length

Links to More Info: BT1083621

Component: Local Traffic Manager

Symptoms:
In some cases, tmm might drop network packets.

In rare circumstances, this might trigger tmm to crash.

Conditions:
BIG-IP Virtual Edition using the virtio driver. You can see this in /var/log/tmm ("indir" is zero):
  notice virtio[0:5.0]: cso: 1 tso: 0 lro: 1 mrg: 1 event: 0 indir: 0 mq: 0 s: 1

Impact:
Tmm might drop packets.

In rare circumstances, this might trigger tmm to crash. Traffic disrupted while tmm restarts.

Workaround:
None


1083589-3 : Some connections are dropped on chained IPv6 to IPv4 virtual servers.

Links to More Info: BT1083589

Component: Local Traffic Manager

Symptoms:
IPv6 virtual servers targeting IPv4 virtual servers (for example, using the 'virtual' iRule command) might drop traffic coming from some clients unexpectedly.

Note: See also ID1002945 (https://cdn.f5.com/product/bugtracker/ID1002945.html), which is a closely related issue.

Conditions:
- IPv6 to IPv4 virtual server chaining.

Impact:
Traffic is dropped.

Workaround:
Apply a SNAT with an IPv4 address to the IPv6 virtual server.


1083513-1 : BD configuration for botdefense.disable_challenge_failure_reporting gets de-synced with mcpd

Links to More Info: BT1083513

Component: Application Security Manager

Symptoms:
"Challenge Failure Reason" field in a request event log shows N/A.

Conditions:
The db key has not been changed manually on the system.

Impact:
"Challenge Failure Reason" field is disabled.

Workaround:
Disable the key and re-enable, then save.

tmsh modify sys db botdefense.disable_challenge_failure_reporting value disable
tmsh modify sys db botdefense.disable_challenge_failure_reporting value enable
tmsh save sys config


1083405-3 : "Error connecting to named socket" from zrd

Links to More Info: BT1083405

Component: Global Traffic Manager (DNS)

Symptoms:
After an mcpd restart, zrd may not be able to re-establish a connection to named. This shows up in the /var/log/gtm file or in the GUI with a message similar to the following:

err zrd[27809]: 01150306:3: Error connecting to named socket 'Connection refused'.
(or)
err zrd[16198]: 01150306:3: Error connecting to named socket 'Connection timed out'.

Conditions:
After an mcpd restart

Impact:
Looking up or modifying zone records may fail.

Workaround:
Restart zrd and named

tmsh restart sys service zrd named


1083053-2 : Apmd memory grows over time in AD auth scenarios

Links to More Info: BT1083053

Component: Access Policy Manager

Symptoms:
Apmd memory grows over time. It is not a memory leak. It is mainly due to memory fragmentation due to memory sharing among apmd threads.

Conditions:
The access policy in use has Active Directory auth as one of the agents

Impact:
Apmd memory grows over time. After it grows beyond a limit, oom killer might kill apmd thereby lead to a traffic disruption.

Workaround:
None


1082581-2 : Apmd sees large memory growth due to CRLDP Cache handling

Component: Access Policy Manager

Symptoms:
Apmd memory keeps growing slowly over time and finally oom killer kills apmd.

Conditions:
Access policy has the crldp auth agent configured.

Impact:
Apmd killed by oom-killer thereby impacting traffic

Workaround:
None


1082197-1 : RNAME and MNAME field order reversed for Synthetic SOAs sent for negative response

Links to More Info: BT1082197

Component: Global Traffic Manager (DNS)

Symptoms:
Synthetic SOA returned by BIG-IP has the MNAME and RNAME fields reversed, resulting in the wrong values being noted as the primary name server and mailbox of administrator, respectively.

Conditions:
-- Set the failure-rcode-response enabled and failure-rcode-ttl on a down WIP.
-- Perform a DNS query.
-- Observe the SOA.

Impact:
Per RFC (rfc1035) the order of the fields is significant and MNAME must come before RNAME. When reversed, consumers of the synthetic SOA will associate the wrong values with the wrong fields.


1082193-3 : TMSH: Need to update the version info for SERVER_INIT in help page

Links to More Info: BT1082193

Component: TMOS

Symptoms:
The SERVER_INIT iRule event was introduced in version 14.0.0. But in tmsh help it is showing as version 13.1.0.

Conditions:
-- Using tmsh to configure an iRule event
-- The BIG-IP version is 13.1.0 and you use tab complete for 'tmsh help ltm rule event SERVER_INIT'

Impact:
The tmsh help makes it appear as if SERVER_INIT is supported in version 13.1.0 when it is not.

Workaround:
None


1081649-2 : Remove the "F5 iApps and Resources" link from the iApps->Package Management

Links to More Info: BT1081649

Component: TMOS

Symptoms:
The "F5 iApps and Resources" is being removed.

Conditions:
NA

Impact:
iApp page shows "F5"

Workaround:
None


1081641-4 : Remove Hyperlink to Legal Statement from Login Page

Links to More Info: BT1081641

Component: TMOS

Symptoms:
The hyperlink to the legal statement should be removed from the login page.

Conditions:
This appears on the login page of OEM-branded BIG-IP systems.

Impact:
The OEM GUI shows the F5 logo/info.

Workaround:
None


1081473-5 : GTM/DNS installations may observe the mcpd process crashing

Links to More Info: BT1081473

Component: Global Traffic Manager (DNS)

Symptoms:
1) The mcpd process may crash, potentially leading to failover/momentary traffic disruption while system components restart

2) Log entries refering to the 'iqsyncer' module similar to the following may be observed prior to the crash

notice mcpd[32268]: 01070751:5: start_transaction received without previous end_transaction - connection 0x62773308 (user %iqsyncer)
notice mcpd[6269]: 010714a0:5: Sync of device group /Common/gtm to commit id 17072 7051583675817774674 /Common/abcd.xyz 0 from device %iqsyncer complete.
notice mcpd[6269]: 01070418:5: connection 0x64c0c008 (user %iqsyncer) was closed with active requests

3) Log entries similar to the following may be observed indicating failure and restart in the mcpd component:

err icr_eventd[11664]: 01a10003:3: Receive MCP msg failed: Can't recv, status: 0x1020046
warning snmpd[8096]: 010e0004:4: MCPD query response exceeding 270 seconds.
err icr_eventd[11664]: 01a10003:3: Receive MCP msg failed: Can't recv, status: 0x1020046
notice sod[9497]: 01140041:5: Killing /usr/bin/mcpd pid 12325.
warning sod[9497]: 01140029:4: high availability (HA) daemon_heartbeat mcpd fails action is restart.
crit tmsh[31348]: 01420001:2: The connection to mcpd has been lost, try again. : framework/RemoteMcpConn.cpp, line 74
crit tmsh[31434]: 01420001:2: The connection to mcpd has been lost, try again. : framework/RemoteMcpConn.cpp, line 74
info sod[9497]: 010c0009:6: Lost connection to mcpd - reestablishing.
err mysqlhad[17260]: 014e0006:3: MCP Failure: 1.

Conditions:
DNS/GTM installation with syncgroup members actively exchanging configuration items.

The issue happens rarely unless a lot of configuration changes occur on one of the syncgroup members, which needs to be carried over.

Impact:
Traffic disrupted while mcpd restarts.

Workaround:
None


1081285-1 : ASM::disable iRule command causes HTTP2 RST_STREAM response when MRF is enabled

Links to More Info: BT1081285

Component: Application Security Manager

Symptoms:
Requests are reset and an error is observed in /var/log/ltm

"ASM::enable is not supported in a child context"

Conditions:
-- HTTP2 client and server enabled on a virtual server
-- MRF profile (httprouter) attached to the virtual server
-- ASM policy and DoS profile attached to the virtual server

Impact:
Web application functionality fails

Workaround:
N/A


1080985-1 : Route Domain ID specified in Address list does not take effect on virtual server IP via TMC.

Component: Local Traffic Manager

Symptoms:
An incorrect virtual server is created because of a non-existent virtual address.

Conditions:
-- Address list is created with an IP addresses on a non-default route domain.
-- Traffic matching criteria is created by assigning the above address list without specifying a route domain.
-- Assign the above traffic matching criteria (TMC) object to the virtual server.

Impact:
The virtual server that is created does not function properly due to the incorrect virtual address.

Workaround:
Set the route-domain of the traffic-matching criteria to an appropriate route-domain value.

(tmos)# modify ltm traffic-matching-criteria <TMC_name> route-domain <route_domain_name>.


1080957-4 : TMM Seg fault while Offloading virtual server DOS attack to HW

Links to More Info: BT1080957

Component: Advanced Firewall Manager

Symptoms:
TMM crashes during virtual server DOS attack scenarios.

Conditions:
-- HSB-equipped hardware platforms.
-- The attack is detected on configured virtual server Dos Vector and trying to offload to hardware.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1080925-3 : Changed 'ssh-session-limit' value is not reflected after restarting mcpd

Links to More Info: BT1080925

Component: TMOS

Symptoms:
Change 'ssh-session-limit' field from 'disabled' to 'enable'. Save the config . Restart the mcpd and check the value of the field 'ssh-session-limit'. It appears to be the same 'disabled'.

Conditions:
The issue occurs when MCPD restores the configuration from its binary database file.

Impact:
Enabling and disabling "ssh-session-limit" will have an undesirable effect when creating ssh sessions, and you will not be able to edit the field.

Workaround:
None


1080613-1 : LU configurations revert to default and installations roll back to genesis files

Links to More Info: BT1080613

Component: Application Security Manager

Symptoms:
The LiveUpdate configurations, such as 'Installation of Automatically Downloaded Updates', and the update installation history disappears and reverts to default, and the installations roll back to genesis files.

Conditions:
This occurs during the first tomcat restart, after upgrading to the versions that have the fix for ID907025.

Impact:
The LiveUpdate configuration and the installation history are reverted to the default.

Workaround:
Https://support.f5.com/csp/article/K53970412


1080569-2 : BIG-IP prematurely closes clientside HTTP1.1 connection when serverside is HTTP2 and HTTP MRF router is enabled on virtual server

Component: Local Traffic Manager

Symptoms:
When clientside is using HTTP1.1, serverside is using HTTP2 and two HTTP GET requests are sent by the client, BIG-IP completes the first HTTP transaction and sends a FIN, even though HTTP keepalive should be enabled.

Conditions:
-- HTTP2 full proxy is configured i.e. http profile, http2 profile and MRF router is enabled. As per https://techdocs.f5.com/en-us/bigip-14-1-0/big-ip-http2-full-proxy-configuration-14-1-0/http2-full-proxy-configuring.html

-- clientside uses HTTP1.1.
-- serverside uses HTTP2.
-- Two subsequent GET requests are sent by the client.

Impact:
Premature TCP connection termination on the clientside.

Workaround:
Disable the MRF router (httprouter).
The drawback is that serverside will always use HTTP1.1 in this case and it might be undesirable if you want to leverage HTTP2.


1080297-1 : ZebOS does not show 'log syslog' in the running configuration, or store it in the startup configuration

Links to More Info: BT1080297

Component: TMOS

Symptoms:
ZebOS does not show the 'log syslog' or 'no log syslog' in the running configuration, nor is it saved to the startup configuration.

There is no way to verify if the 'log syslog' is configured or not by checking the configuration.

Conditions:
-- Under Configure log syslog.
-- Check the show running-config.

Impact:
There is no way to verify if the 'log syslog' is configured or not by checking the configuration.

Workaround:
If logging to syslog is not desired, it must be re-disabled every time the ZebOS daemons are started, using 'no log syslog'.


1079985-3 : int_drops_rate shows an incorrect value

Links to More Info: BT1079985

Component: Advanced Firewall Manager

Symptoms:
int_drops_rate shows an incorrect value, it shows a cumulative value instead of an avg value, same as int_drops and syncookies.hw_syncookies.

Conditions:
A tcp-halfOpen attack or similar SYN attack where SYNs are flooded into the BIG-IP system.

Impact:
It is difficult to figure out the drop rate per second

Workaround:
None


1079769-1 : Tmm utilizing the virtio driver might crash after modifying several IPv6 virtual servers

Links to More Info: BT1079769

Component: Local Traffic Manager

Symptoms:
Tmm crash

There might be entries similar to the following in the tmm log:
notice virtio[0:7.0]: MAC filter[27]: 33:33:ff:00:10:01 - deleted
notice virtio[0:7.0]: MAC filter[27]: 33:33:ff:00:10:01 - added

Conditions:
-- The tmm is utilizing the virtio driver for network communications.
-- Many changes, of the order of at least 1900, are made to IPv6 listeners.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
A work-around would be to utilize the sock driver. However, that will not perform as well.


1079705-4 : Restjavad may restart repeatedly if sys db provision.extramb is high

Links to More Info: BT1079705

Component: TMOS

Symptoms:
Restjavad restarts repeatedly when it has been configured to have a near maximal heap size by use of system database variables restjavad.useextramb and provision.extramb

Conditions:
Affected versions have fix for ID 776393 ( https://cdn.f5.com/product/bugtracker/ID776393.html )

Affected version do not have fix for ID 943653 ( https://cdn.f5.com/product/bugtracker/ID943653.html )

Value of sys db restjavad.useextramb is true.

Value of sys db provision.extramb is higher than approximately 2450MB (possibly could have issue from slightly lower values but above 2260MB and below will be safe)

Systems with higher numbers of CPU cores (8 and above) are more likely to be affected

Impact:
Restjavad restarts and REST API may be unavailable.

Workaround:
Lower sys db provision.extramb to a value of 2260 MB.

tmsh modify sys db provision.extramb value 2260

Note this is service affecting, and will need to be carried out in turn on each member of a device service cluster

Note this is likely to reduce host memory available which if left too low will increase likelihood of system issues. If in any doubt use a fixed version.


1079441-2 : APMD leaks memory in underlying LDAP/AD cyrus/krb5 libraries

Links to More Info: BT1079441

Component: Access Policy Manager

Symptoms:
APMD memory can grow over a period of time

Conditions:
-- A BIG-IP system with the patched cyrus-sasl/krb5 libraries

Impact:
APMD memory can grow over a period of time

Workaround:
None


1079237-1 : After certain configuration tasks are performed, TMM may run with stale SNAT translation parameters.

Links to More Info: BT1079237

Component: Local Traffic Manager

Symptoms:
A SNAT translation object instantiated by performing specific configuration tasks (see Conditions) does not work.

For example:

- Connections might be reset with cause "No available SNAT addr".

- An unexpected IP address might be used to SNAT the outgoing traffic.

Conditions:
This issue is known to occur when one of the following operations is performed:

- Restoring a UCS or SCF archive in which a SNAT translation with a specific name specifies a different IP address or route domain.

- Performing a config-sync between redundant units in which the sender changes a SNAT translation with a specific name to use a different IP address or route domain.

- Performing specific tmsh CLI transactions involving SNAT translation modifications.

Impact:
The system does not use the configured SNAT translation address. Traffic will be impacted as a result (for example, reset connections or incorrect source IP address in outgoing traffic).

Workaround:
Restart TMM (bigstart restart tmm) on affected units.


1078741-2 : Tmm crash

Links to More Info: BT1078741

Component: Local Traffic Manager

Symptoms:
Tmm crashes while processing an iRule while handling traffic.

Conditions:
-- HTTP virtual server
-- HTTP profile with explicit proxy having default-connect-handling allowed
-- iRule with SERVER_CONNECTED event

Impact:
Traffic disrupted while tmm restarts.


1078625 : TMM crashes during DoS processing

Links to More Info: BT1078625

Component: Advanced Firewall Manager

Symptoms:
TMM crashes and restarts multiple times

Conditions:
Stand alone unit with on running a single Network Access VPN virtual server.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1078357-2 : HTTP_REJECT processing can lead to zombie SPAWN flows

Links to More Info: BT1078357

Component: Local Traffic Manager

Symptoms:
Due to the presence of a specific set of events in the iRule, the Bloom filter may cause TCL to execute an event that is not implemented in the iRule.

In the execution of a sequence of events, when TCL attempts to execute the non-existing event, it follows a path which in turn makes SPAWN flow to become a zombie.

Conditions:
-- http2, client-ssl, optimised-caching filters on the virtual server
-- HTTP::respond iRule with LB_FAILED event and set of iRules like HTTP_REQUEST, HTTP_RESPONSE, CLIENTSSL_HANDSHAKE, CACHE_RESPONSE, ASM_REQUEST_BLOCKING
-- send http2 request through the virtual server

Impact:
Causes issues with monitoring system


1078065-2 : The login page shows blocking page instead of CAPTCHA or showing blocking page after resolving a CAPTCHA.

Links to More Info: BT1078065

Component: Application Security Manager

Symptoms:
The login page shows a blocking page instead of CAPTCHA or shows the blocking page after resolving a CAPTCHA.

Make five (configured in brute force configuration) failed login attempts and you will receive a blocking page.

Blocking Reason: Resource not qualified for injection.

Conditions:
HTML response message has an html page with a length greater than 32000 bytes.

Impact:
Users are blocked after failed login attempts.

Workaround:
Run tmsh modify sys db asm.cs_qualified_urls value <url value>.


1077789-4 : System might become unresponsive after upgrading.

Links to More Info: BT1077789

Component: TMOS

Symptoms:
After upgrading, the system encounters numerous issues:

-- Memory exhaustion (RAM plus swap) with no particular process consuming excessive memory.
-- High CPU usage with most cycles going to I/O wait.
-- System is unresponsive, difficult to log in, slow to accept commands.
-- Provisioning is incomplete; there is a small amount of memory amount assigned to 'host' category.

Conditions:
-- The configuration loads in the previous release, but does not load successfully on the first boot into the release you are upgrading to.
-- Device is upgraded and the configuration is rolled forward.
-- There may be other conditions preventing the configuration from loading successfully after an upgrade.

Exact conditions that trigger this issue are unknown and could be varied. In the environment in which it occurs, a datagroup is deleted, but an iRule still references it.

Impact:
-- System down, too busy to process traffic.
-- Difficulty logging in over SSH might require serial console access.

Workaround:
Reboot to an unaffected, pre-upgrade volume.

-- If the system is responsive enough, use 'tmsh reboot volume <N>' or switchboot to select an unaffected volume.

-- If the system is completely unresponsive, physically powercycle a physical appliance or reboot a BIG-IP Virtual Edition (VE) from an applicable management panel, and then select an unaffected volume from the GRUB menu manually.

Note: This requires that you have console access, or even physical access to the BIG-IP device if you are unable to SSH in to the unit. On a physical device, a non-responsive system might require that you flip the power switch.

For more information, see:
-- K9296: Changing the default boot image location on VIPRION platforms :: https://support.f5.com/csp/article/K9296
-- K5658: Overview of the switchboot utility :: https://support.f5.com/csp/article/K5658
-- K10452: Overview of the GRUB 0.97 configuration file :: https://support.f5.com/csp/article/K10452.


1077553-3 : Traffic matches the wrong virtual server after modifying the port matching configuration

Links to More Info: BT1077553

Component: Local Traffic Manager

Symptoms:
Traffic matches the wrong virtual server.

Conditions:
A virtual server configured to match any port is modified to matching a specific port. Alternatively, a virtual server matching a specific port is modified to match any port.

Impact:
Traffic may be directed to the wrong backend server.

Workaround:
Restart the TMM after the config change.


1077533-1 : BIG-IP fails to restart services after mprov runs during boot.

Links to More Info: BT1077533

Component: TMOS

Symptoms:
Very occasionally, after mprov runs after a reboot the BIG-IP may fail to start with logs similar to the following:

bigip1 info mprov:7459:[7459]: 'admd failed to stop.'
bigip1 err mprov:7459:[7459]: 'admd failed to stop, provisioning may fail.'
bigip1 info mprov:7459:[7459]: 'avrd failed to stop.'
bigip1 info mprov:7459:[7459]: 'avrd failed to stop.'
...
bigip1 err mcpd[5584]: 01071392:3: Background command '/usr/bin/mprov.pl --quiet --commit asm avr host tmos ui ' failed. The command was signaled.

Conditions:
Occurs rarely after a reboot.

Impact:
The BIG-IP is unable to finish booting.

Workaround:
Reboot the BIG-IP again.


1077405-2 : Ephemeral pool members may not be created with autopopulate enabled.

Links to More Info: BT1077405

Component: TMOS

Symptoms:
Ephemeral pool members might not be added to a pool with an FQDN pool member "autopopulate enabled".

When this issue occurs:

-- Some or all of the expected Ephemeral Pool Members will not be created for the affected pool.

-- A message will be logged in the LTM log similar to the following:

err mcpd[####]: 01070734:3: Configuration error: Cannot enable pool member to autopopulate: node (/Common/_auto_<IP address>) has autopopulate set to disabled.

(Note that the node name here is an Ephemeral Node.)

Also note that if you attempt to create an FQDN Pool Member with autopopulate enabled while the corresponding FQDN Node has autopopulate disabled, you will see a similar error message:
01070734:3: Configuration error: Cannot enable pool member to autopopulate: node (/Common/fred) has autopopulate set to disabled.

Conditions:
This issue can occur under the following conditions:

-- Two or more FQDN Nodes have FQDN names that resolve to the same IP address(es).
  -- That is, some Ephemeral Nodes have addresses resolved by more than one FQDN name defined in FQDN Nodes.

-- At least one of these FQDN Nodes has "autopopulate enabled."

-- At least one of these FQDN Nodes does not have "autopopulate enabled."
  -- That is, autopopulate is disabled for one or more of these FQDN Nodes.

-- The FQDN Pool Member(s) in the affected pool(s) has "autopopulate enabled."

Impact:
The affected LTM pool(s) are not populated with expected (or any) ephemeral pool members.

Workaround:
To allow some LTM pools to use FQDN pool members with autopopulate enabled (allowing multiple ephemeral pool members to be created) while other LTM pools use FQDN pool members with autopopulate (allowing only one ephemeral pool member to be created), configure the following:

-- Create all FQDN Nodes with FQDN names that might resolve to a common/overlapping set of IP addresses with "autopopulate enabled".

-- Create FQDN Pool Members with autopopulate enabled or disabled depending on the desired membership for each pool.


1077293-2 : APPIQ option still showing in BIG-IP GUI even though its functionality migrated to BIG-IQ.

Links to More Info: BT1077293

Component: TMOS

Symptoms:
AppIQ is still visible in the System :: Configuration screen.

Conditions:
Navigating to the System :: Configuration : AppIQ page.

Impact:
AppIQ appears to be able to be provisioned but it has been removed from the BIG-IP system.

Workaround:
N/A


1076909-4 : Syslog-ng truncates the hostname at the first period.

Links to More Info: BT1076909

Component: TMOS

Symptoms:
Messages that are logged to journald use the configured hostname, while sylog-ng uses the hostname (machine name) and truncates it starting at the first '.' (period). This results in hostnames being inconsistent when it contains '.'; e.g., 'my.hostname' is logged as 'my' by syslog-ng, and 'my.hostname' by journald. This can make it difficult for log analysis tools to work with the log files.

Conditions:
-- Hostname contains a period.
-- Viewing log files emitted from journald and from syslog-ng.

Impact:
The full hostname is logged for system logs while logs that go directly to syslog-ng use a truncated hostname.

Workaround:
None


1076897-4 : OSPF default-information originate command options not working properly

Links to More Info: BT1076897

Component: TMOS

Symptoms:
OSPF default-information originate command options are not working properly.

Conditions:
Using OSPF default-information originate with metric/metric-type options.

Impact:
Incorrect route advertisement.

Workaround:
None


1076825-1 : "Installation of Automatically Downloaded Updates" configuration reverts to default after upgrade to v16.1.x from earlier releases.

Links to More Info: BT1076825

Component: Application Security Manager

Symptoms:
"Installation of Automatically Downloaded Updates" configuration reverts to default after upgrade to v16.1.x from earlier releases.

Conditions:
Upgrading to v16.1.x from earlier releases.

Impact:
Configuration of "Installation of Automatically Downloaded Updates" is lost and reverts to default.

Workaround:
Manually configure "Installation of Automatically Downloaded Updates" after the upgrade.


1076801-4 : Loaded system increases CPU usage when using CS features

Links to More Info: BT1076801

Component: TMOS

Symptoms:
When the BIG-IP system is under heavy load, datasyncd might create multiple java obfuscator processes running at the same time, which increases load even more.

Conditions:
-- CPU utilization on the BIG-IP system is high.

And one or more of the following conditions:

-- Bot Defense profile is attached to a virtual server
-- DoS profile with CS/Captcha mitigation is attached to the virtual server
-- ASM policy with brute force configuration is attached to the virtual server

Impact:
System load is increased.

Workaround:
None.


1076785-2 : Virtual server may not properly exit from hardware SYN Cookie mode

Links to More Info: BT1076785

Component: TMOS

Symptoms:
Virtual servers do not exit hardware SYN Cookie mode even after the SYN flood attack stops. The TMSH 'show ltm virtual' output shows 'full hardware' mode.

Conditions:
Selected HSB platforms where TMM is attached to multiple HSB modules. This depends on platform, BIG-IP version and selected Turboflex profile where applicable.

Impact:
The affected virtual server would not receive the TCP SYN packets until a TMM restart. The limited range of MSS values in SYN Cookie mode may slightly affect performance.

Workaround:
Disable hardware SYN Cookie mode on all virtual servers.


1076577-3 : iRule command 'connects' fails to resume when used with Diameter/Generic-message 'irule_scope_msg'

Links to More Info: BT1076577

Component: Local Traffic Manager

Symptoms:
The 'connect' iRule command fails to resume, causing processing of traffic to halt due to 'irule_scope_msg', which causes iRule processing to proceed in a way that 'connect' does not expect.

Conditions:
- iRule using 'connect' command
- Diameter/Generic-message 'irule_scope_msg' enabled

Impact:
Traffic processing halts (no crash)


1076477-2 : AFM allows deletion of a firewall policy even if it's being used in a route domain.

Links to More Info: BT1076477

Component: Advanced Firewall Manager

Symptoms:
AFM allows you to delete a firewall policy that is still applied to a route domain.

Conditions:
A firewall policy is created and assigned to a route domain.

Impact:
The firewall policy can be deleted without warning or error.

Workaround:
Before deleting a firewall policy check to make sure it is not being used in any route domain.


1076253-1 : IKE library memory leak

Links to More Info: BT1076253

Component: TMOS

Symptoms:
After the tunnel is established there is continuous increase in memory is seen in the IKE library (memory_usage_stat)

Conditions:
-- IPSEC tunnels are established.
-- DPD delay = 30 sec

Impact:
Continuous memory increase on the BIG-IP system.

Workaround:
None


1076165-1 : GRPC traffic does not work with DoSL7.

Links to More Info: BT1076165

Component: Application Security Manager

Symptoms:
GRPC trailers are not passing from server to client.

Conditions:
DoSL7 profile is attached to a gRPC virtual server.

Impact:
GRPC traffic is not passing correctly.

Workaround:
N/A


1075905-3 : TCP connections may fail when hardware SYN Cookie is active

Links to More Info: BT1075905

Component: TMOS

Symptoms:
When an object is in hardware SYN Cookie mode, some of the valid connections are also rejected with "No flow found for ACK" reset cause.

Conditions:
VELOS and rSeries platforms.

Impact:
Service degradation.

Workaround:
Disable hardware SYN Cookie on all objects (virtual server, VLAN, etc.).


1075545 : Changing the datasyncd activation-epoch results in high CPU usage for 24 hours

Links to More Info: BT1075545

Component: Fraud Protection Services

Symptoms:
Changing the datasync activation time by creating a new datasync profile results in double the amount of obfuscation processes running simultaneously.

Conditions:
Creating a new datasync profile with a different activation-epoch

Impact:
High CPU usage for up to 24 hours


1075469-1 : DNS GUI: Refreshing a DNS Express record sometimes fails to populate the server.

Links to More Info: BT1075469

Component: Global Traffic Manager (DNS)

Symptoms:
Although there are name servers for the non-common partition, the Server field populates as "None".

Conditions:
-- Updating the DNS express record by performing enable/disable operations.

Impact:
DNS express Server is shown as None for a DNS zone record.

Workaround:
Refresh the page and it will display the correct value.


1075045-1 : Proxy initialization failed, Defaulting to DENY, after applying additional profile to a virtual server

Links to More Info: BT1075045

Component: Local Traffic Manager

Symptoms:
Connections are reset when accessing a virtual server, with an F5 reset cause of "Port denied".

Messages in /var/log/ltm:

err tmm[<PID>]: 01010008:3: Proxy initialization failed for <virtual server>. Defaulting to DENY.
err tmm[<PID>]: 01010008:3: Listener config update failed for <virtual server>: ERR:ERR_MEM

Conditions:
-- Virtual server configured with many profiles
-- Adding an additional profile to the virtual server

Impact:
All connections to the virtual server are immediately reset.

Workaround:
Reduce the number of profiles applied to the virtual server.


1074841-1 : Invalid syslog configuration kills syslog-ng after restarting syslog-ng.

Links to More Info: BT1074841

Component: TMOS

Symptoms:
Syslog-ng is stopped after restarting syslog-ng with an invalid syslog configuration.

Conditions:
--Invalid syslog-ng configuration.
--bigstart restart syslog-ng

Impact:
Syslog-ng is stopped.

Workaround:
N/A


1074505-1 : Traffic classes are not attached to virtual server at TMM start

Links to More Info: BT1074505

Component: Local Traffic Manager

Symptoms:
When tmm starts, an error message is logged in the TMM log:

"MCP message handling failed in 0xXXXX (XXXXXXXX)"

Conditions:
Virtual server with traffic class attached is being used.

Impact:
A traffic class is not being attached to the virtual server so traffic matching the traffic classes does not work.


1074053-1 : Delay in displaying the "Now Halting..." message while performing halt from LCD.

Links to More Info: BT1074053

Component: TMOS

Symptoms:
While halting the system from LCD panel, the "Now Halting..." message takes 90 seconds to appear.

Conditions:
Perform the system halt operation from the LCD front panel.

Impact:
Delay in processing the halt operation.

Workaround:
N/A


1073965-1 : IPsec IKEv2 tunnel may report huge "life" for IKE SA.

Links to More Info: BT1073965

Component: TMOS

Symptoms:
The output of "tmsh show net ipsec ike-sa" will report an impossibly high life value.

tmsh show net ipsec ike-sa | grep Life
  Life/Active Time: 18446744073709551028/6 seconds

Decrypting the IKE AUTH payload will show something similar to this:

        Decrypted Data (160 bytes)
            Contained Data (156 bytes)
                Payload: Identification - Responder (36)
                Payload: Authentication (39)
                Payload: Security Association (33)
                Payload: Traffic Selector - Initiator (44) # 1
                Payload: Traffic Selector - Responder (45) # 1
                Payload: Notify (41) - AUTH_LIFETIME
                    Next payload: NONE / No Next Payload (0)
                    0... .... = Critical Bit: Not Critical
                    .000 0000 = Reserved: 0x00
                    Payload length: 12
                    Protocol ID: RESERVED (0)
                    SPI Size: 0
                    Notify Message Type: AUTH_LIFETIME (16403)
                    Notification DATA: fffffdb4
                    Authentication Lifetime: 4294966708 seconds (1193046 hour(s) 18 minute(s) 28 second(s))
            Padding (3 bytes)
            Pad Length: 3

Conditions:
-- IKEv2
-- BIG-IP is initiator
-- Responder sends very high value (close to maximum possible in 4 byte payload) for Authentication Lifetime in IKE AUTH phase.

Impact:
In general this is not a problem unless the DPD/liveness is disabled and the remote peer silently goes away. Under perfect conditions, the remote peer would send a delete for the IKE SA to the BIG-IP and cause the BIG-IP (as initiator) to start a new IKE SA as required.

Workaround:
Ensure the remote peer sends a more reasonable value such as 1 day for the IKE AUTH lifetime.

Strongswan devices have been observed to send a very high value when configured with an unreasonably low "ikelifetime" (in the order of a few minutes).


1073897-2 : TMM core due to memory corruption

Links to More Info: BT1073897

Component: Local Traffic Manager

Symptoms:
Tmm restarts

Conditions:
Unknown

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1073677-1 : Add a db variable to enable answering DNS requests before reqInitState Ready

Links to More Info: BT1073677

Component: Global Traffic Manager (DNS)

Symptoms:
When a new GTM is added to the Sync group, it takes a significant amount of time, and the newly added GTM won't become ready.

Conditions:
-- GTMs in a cluster with a large number of persist records
-- A new GTM device is added

Impact:
Clients of the BIG-IP GTM do not receive an answer, and application failures may occur.

Workaround:
None


1073673-1 : Prevent possible early exit from persist sync

Links to More Info: BT1073673

Component: Global Traffic Manager (DNS)

Symptoms:
When a new GTM is added to the Sync group, it takes a significant amount of time, and the newly added GTM won't become ready.

Conditions:
-- GTMs in a cluster with a large number of persist records
-- A new GTM device is added

Impact:
Clients of the BIG-IP GTM do not receive an answer, and application failures may occur.

Workaround:
None


1073429-1 : Auth partition definition is incorrectly synchronized to peer and then altered.

Links to More Info: BT1073429

Component: TMOS

Symptoms:
An auth partition definition with "device-group none" and "traffic-group none" is incorrectly synchronized to other devices during a full config-sync.

Specifically, the partition is incorrectly synchronized to all other devices that belong to the device-group to which the /Common partition is associated.

Furthermore, the receiving devices incorrectly alter the definition of said partition, in such a way that the definition no longer specifies "device-group none" and "traffic-group none". Instead, this partition will now have inheritance (from the root folder) enabled for both the device-group and traffic-group properties.

Conditions:
Creating an auth partition (for example /Example) which specifies "device-group none" and "traffic-group none" on redundant units, and then issuing a full config sync to the device-group.

Note that even if your device-group is configured to perform incremental syncs, sometimes performing a full sync between devices is a natural and unavoidable event.

Impact:
The definition of an auth partition that was meant to remain local to a given BIG-IP system is incorrectly synchronized to peer devices. Additionally, its device-group and traffic-group properties are altered so that inheritance from the root folder is now enabled.

Initially, this has no other negative consequences, as the configuration objects contained in the "local partition" of the source device are not synchronized. However, a further config sync from the initial receiving device to the initial source device will overwrite the device-group and traffic-group properties there. Once in this state, the unit that contains configuration objects in the "local partition" will synchronize them to the peers during the next config-sync. This can impact the application traffic based on the objects synchronized.

Workaround:
You cannot work around this issue.

However, you may be able to achieve your goal of having a repository for local-only objects by creating a subfolder to the /Common partition rather than creating a new partition.

For example:

tmsh create sys folder /Common/local device-group none traffic-group none


1073273-1 : RESOLVER::name_lookup not returning truncated responses

Links to More Info: BT1073273

Component: Global Traffic Manager (DNS)

Symptoms:
The iRule RESOLVER::name_lookup function will not return DNS answers when the query response is larger than 4096 bytes.

Conditions:
Send a query through RESOLVER::name_lookup where the expected answer returned would be greater than 4096 bytes.

Impact:
Even if there are valid answers to be returned, no answers will be returned if the size of the response packet is greater than 4096 bytes.


1072397-1 : VLAN failsafe failover does not occur in three-node device group

Links to More Info: BT1072397

Component: Local Traffic Manager

Symptoms:
VLAN failsafe fails to activate the next-active device in a device group.

Conditions:
-- Three devices in a sync/failover device group
-- A VLAN goes down on the active device, or is unable to communicate with the device group

Impact:
-- VLAN failsafe does not trigger and the next-active device does not become active


1072377-3 : TMM crash in rare circumstances during route changes

Links to More Info: BT1072377

Component: Local Traffic Manager

Symptoms:
TMM might crash in rare circumstances when static/dynamic route changes.

Conditions:
Dynamic/static route changes.

Impact:
TMM can crash or core. Traffic processing stops during process restart.

Workaround:
None


1072173-1 : The BIG-IP system incorrectly presents legacy ways of defining mirroring properties

Links to More Info: BT1072173

Component: TMOS

Symptoms:
The 'sys state-mirroring' section in tmsh, as well as the following db keys, are deprecated and should not be used to define the mirroring properties of a device:

sys db statemirror.ipaddr
sys db statemirror.peeripaddr
sys db statemirror.secondary.ipaddr
sys db statemirror.secondary.peeripaddr
sys db statemirror.state

If you wish to configure the mirroring properties of a BIG-IP device, please use the 'cm' section in tmsh, or use the configuration utility under Device Management > Devices.

Each device only needs to set its own properties, for instance:

tmsh modify cm device bigip-ntr-a.local mirror-ip 10.0.0.60
tmsh modify cm device bigip-ntr-a.local mirror-secondary-ip 192.168.1.60

Conditions:
BIG-IP Administrator configuring mirroring properties.

Impact:
Using one of the deprecated ways to configure mirroring will not achieve the intended result. These may be removed from the product in a future version to avoid confusion and errors.

Workaround:
None


1072165-2 : Threat_campaign_names and staged_threat_campaign_names fields are missing in ArcSight format

Links to More Info: BT1072165

Component: Application Security Manager

Symptoms:
Threat_campaign_names and staged_threat_campaign_names fields are missing in ArcSight format

Conditions:
ASM remote logging in ArcSight format

Impact:
Due to the missing fields, the remote message does not tell name of threat campaign name(s) that was detected.

Workaround:
Use other message format.


1072081-1 : Imish segmentation fault when running 'ip pim sparse-mode ?' on interface config.

Links to More Info: BT1072081

Component: TMOS

Symptoms:
Imish crahses and produces a core file.

Conditions:
-- Add PIM to a route-domain
-- Run 'ip pim sparse-mode ?' while on imish configuration mode on interface level

Impact:
No real impact.

Workaround:
N/A


1071385-3 : SSL session resumption is incorrectly logging handshake failure messages

Links to More Info: BT1071385

Component: Local Traffic Manager

Symptoms:
Handshake failure messages are logged when the handshake was successful.

Conditions:
-- Client establishes connection with session resumption option

Impact:
Inaccurate information in log.

Workaround:
None


1071021-1 : Some URLs such as *cdn.onenote.net configured in the Office 365 dynamic address space are not processed by APM

Links to More Info: BT1071021

Component: Access Policy Manager

Symptoms:
Dynamic address space parser not accepting few patterns(*cdn.example.net) which are added at the DNS address space field.

Conditions:
When the user configures Office 365 Dynamic Address Space with URLs formats like:

 *-admin.sharepoint.com
 *cdn.onenote.net
 *-files.sharepoint.com
 *-myfiles.sharepoint.com

Impact:
Due to the above pattern DNS relay proxy is not compatible with them.

Workaround:
N/A


1070957-1 : Database monitor log file backups cannot be rotated normally.

Links to More Info: BT1070957

Component: Local Traffic Manager

Symptoms:
Debug log files used by the BIG-IP database monitor daemon (DBDaemon) do not exhibit the log-rotation behavior of other BIG-IP log files.
- The active DBDaemon log file is /var/log/DBDaemon-0.log
- DBDaemon log file size is limited to approximately 5MB. DBDaemon log files are backed up/rotated upon reaching this size.
- Exactly 9 (nine) DBDaemon log file backups are retained (/var/log/DBDaemon-0.log.[1-9])
- DBDaemon log file backups are not compressed.
- DBDaemon log file backup/rotation behavior is not user-configurable.

Conditions:
This issue applies when using BIG-IP database monitors:
-- mssql
-- mysql
-- oracle
-- postrgresql

Impact:
-- DBDaemon log file backups may consume more space under /var/log than desired.
-- When troubleshooting database monitor issues, DBDaemon log file rotation may occur so rapidly that older DBDaemon events may be lost, limiting the ability to capture meaningful diagnostic data.

Workaround:
It may be possible to work around this issue by periodically archiving DBDaemon log files, such as in a script with the following core functionality:
pushd /var/log;tar -czf DBDaemon_$(date +%Y%m%d%H%M).tgz DBDaemon-0.log*;popd


1070953-4 : Dnssec zone transfer could cause numerous gtm sync events.

Links to More Info: BT1070953

Component: Global Traffic Manager (DNS)

Symptoms:
GTM syncs for zone transfers that happen on other GTMs.

Conditions:
Dnssec zone transfer to client on peer GTM in the same GTM sync group.

Impact:
Numerous GTM sync and possible sync storm.

Workaround:
N/A


1070737-2 : AFM does not detect NXDOMAIN attack at virtual context when DNS cache is activated.

Links to More Info: BT1070737

Component: Advanced Firewall Manager

Symptoms:
When the DNS cache is activated, the NXDOMAIN DoS vector does not increase for the virtual server context. As a result, NXDOMAIN flood attack is never detected/mitigated at the virtual server context.

Note this does not happen with other vectors like DNS A query flood attack, only for NXDOMAIN.

Conditions:
Issue is only seen When DNS cache is activated and for NXDOMAIN Dos Vector.

Impact:
NXDOMAIN flood attack is never detected/mitigated at virtual server context.

Workaround:
N/A


1070181-3 : Secondary MCPD crashes with Configuration error

Links to More Info: BT1070181

Component: Local Traffic Manager

Symptoms:
MCPD crashes with an error:
Configuration error: In Virtual Server (/Common/vip-test) an http2 profile with enforce-tls-requirements enabled is incompatible with client ssl profile '/Common/test-reneg-2'; renegotiation must be disabled

Conditions:
Virtual server with
-> http2 profile - 'enfore-tls-requirements' enabled
-> client-ssl profile 1 - 'renegotiation' disabled
-> client-ssl profile 2 - 'renegotiation' enabled

Impact:
MCPD crashes on the non-active device.

Workaround:
Disable 'enforce-tls-requirements' of http2 profile


1070141-1 : The SNAT Automap and self IP address selection.

Links to More Info: BT1070141

Component: Local Traffic Manager

Symptoms:
When a snat pool member is deleted, POOL_FLAG_HOMOGENEOUS is not re-set properly when the pool member is deleted.

Conditions:
-- SNAT pool with two members in multiple networks
-- One pool member is deleted such that all SNAT pool members are on the same network.

Impact:
The pool is not treated as homogenous after the change. This can cause a potential performance degradation or incorrect selection of SNAT pool members.

Workaround:
N/A


1070033-2 : Virtual server may not fully enter hardware SYN Cookie mode.

Links to More Info: BT1070033

Component: Advanced Firewall Manager

Symptoms:
The SYN Cookies Status of a virtual server shows 'full-hardware', but the 'Total Software' counter of software SYN Cookies continues to increment together with the 'Total Hardware' SYN Cookie counter during a SYN flood attack.

Conditions:
On platforms with multiple HSB modules each TMM connects to only one of the modules. This depends on platform, BIG-IP version and selected turboflex profile.

The simplest way to check is to look at the epva_flowstat tmstat table. If there is only one row per TMM and there are more than one distinct mod_id numbers, then the device is affected. For example:

$ tmctl -s tmm,mod_id,pdenum,slot_id epva_flowstat
tmm mod_id pdenum slot_id
--- ------ ------ -------
  0 1 0 0
  1 1 8 0
  2 2 0 0
  3 2 8 0

Impact:
A portion of the SYN flood attack is handled in software, which might have some performance impact.

Workaround:
N/A


1070029-1 : GSS-SPNEGO SASL mechanism issue with AD Query to Synology Directory Service

Links to More Info: BT1070029

Component: Access Policy Manager

Symptoms:
Active Directory queries may fail.

Conditions:
-- Users/Services are configured in Synology Directory Service (Non Microsoft based Active Directory Service)
-- Active Directory Query Configuration on BIG-IP

Impact:
User authentication based on AD Query agent will be impacted.

Workaround:
None


1069809 : AFM rules with ipi-category src do not match traffic after failover.

Links to More Info: BT1069809

Component: Advanced Firewall Manager

Symptoms:
BIG-IP drops all traffic after a reboot or failover.

Conditions:
-- Create firewall rules with IPI deny-list category as source and default action as drop.
-- After reboot, the rule with IPI category as source will overlap all rules and with default action as drop, traffic will be dropped.

Impact:
Site is down, no traffic passes through the BIG-IP.

Workaround:
Workaround is to restart the pccd, as it compiles the blob again with all IPI category initialized:

tmsh restart sys service pccd


1069729-3 : TMM might crash after a configuration change.

Links to More Info: BT1069729

Component: Application Security Manager

Symptoms:
After modifying a dosl7 profile, on rare cases TMM might crash.

Conditions:
Modifying DoSl7 profile attached to a virtual server.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
N/A


1069321-2 : High iowait and pgstat wait every hour on the hour, due to excessive logging in autodosd.out

Links to More Info: BT1069321

Component: Advanced Firewall Manager

Symptoms:
Undesirable log messages are logged to /shared/tmp/autodosd.out

Dec 06 15:48:04|mcp_process_aggregate_period|2607| Before sorting ctx[device-global]:dosid[62] tmmid[9] agg[11] proto[0] top1[1451] top2[1634] top3[1449] top4[1652] mean[1393] bump[16] ba_max[0] bd_max[0]
Dec 06 15:48:04|mcp_process_aggregate_period|2615| After sorting ctx[device-global]:dosid[62] tmmid[9] agg[11] proto[0] top1[1652] top2[1634] top3[1451] top4[1449] mean[1393] bump[16] ba_max[0] bd_max[0]
 F55 coming to inside query stress
 F55 coming to inside query stress

Conditions:
AFM provisioned

Impact:
The BIG-IP system may hang, or have high disk, memory, or cpu utilization. This can lead to a variety of issues, such as a sluggish management interface, or external ltm monitors failing to fire at regular intervals.

Workaround:
None.


1069137-2 : Missing AWAF sync diagnostics

Links to More Info: BT1069137

Component: Application Security Manager

Symptoms:
Complex issues related to Policy Synchronization over Device Sync Groups are difficult to diagnose.
More detailed logging is needed if errors occur.

Conditions:
Device Group Sync is enabled.

Impact:
Root cause analysis is lengthy and difficult.

Workaround:
Enable debug logs in the environment:
> tmsh modify sys db log.asm.asmconfiglevel value debug
> tmsh modify sys db log.asm.asmconfigvent.level value debug
> tmsh modify sys db log.asm.asmconfigverbose.level value debug


1069113-1 : ASM process watchdog should be less aggressive

Links to More Info: BT1069113

Component: Application Security Manager

Symptoms:
During standard operation a process is expected to exit and be restarted once it has exceeded a certain memory limit. As a failsafe, the watchdog forcefully kills the process if it exceeds a higher threshold. But if the handler was running close to the memory limit before a resource-intensive event like a full sync load, this operation could push it over both limits.

Conditions:
An ASMConfig handler is running close to the memory limit before a resource intensive event, like a full sync load.

Impact:
A process may be killed in the middle of a data-integrity sensitive action, like a device-group sync, which can leave the system in a corrupt state.

Workaround:
Modify the memory limits in nwd.cfg to raise it by 100 MB.

To load the configuration change, restart the asm_config_server process.

Impact of workaround: Performing the following procedure should not have a negative impact on your system:

1. Log in to the BIG-IP system command line.
2. To restart the asm_config_server process, type the following command:
"pkill -f asm_config_server"

Note : Restarting the asm_config_server process does not disrupt traffic processing.

The BIG-IP ASM watchdog process automatically restarts the asm_config_server process within 10 to 15 seconds.


1069001 : TMM crash in TLS/SSL processing

Links to More Info: BT1069001

Component: Local Traffic Manager

Symptoms:
TMM crashes with a SIGSEGV.

Conditions:
Unknown.

Impact:
Traffic disrupted while TMM restarts.

Workaround:
None


1068673-3 : SSL forward Proxy triggers CLIENTSSL_DATA event on bypass.

Links to More Info: BT1068673

Component: Local Traffic Manager

Symptoms:
The CLIENTSSL_DATA iRule event is triggered unexpectedly during SSL forward proxy bypass.

Conditions:
This issue is seen when SSL forward proxy with bypass is enabled on client & server SSL profiles.

Impact:
This can cause unexpected failure of existing iRules which only expect CLIENTSSL_DATA on intercepted (and decrypted) data.

Workaround:
N/A


1067917-1 : Attaching iRule DOSL7::enable when mitigation is not enabled at dosl7 profile, it is not showing warning in GUI.

Links to More Info: BT1067917

Component: Application Security Manager

Symptoms:
Attaching iRule DOSL7::enable to virtual server when same virtual server attached to dosl7 profile without mitigation enables. It is able to attach iRule the successful but same steps is giving error in 13.1.3.6
"1070151:3: Rule [/Common/<iRulename>] error: Unable to find profile_dos (<dos profile name>) referenced at line 3: [DOSL7::enable <dosl7 profile name>]"

Conditions:
Create dosl7 profile without any mitigation enabled and have iRule
when HTTP_REQUEST {

 DOSL7::enable test
}

Attach iRule to virtual server.

Impact:
No warning is shown, but the rule causes an error in the logs and does not apply.

Workaround:
Enable the mitigation in order to attach this DOSL7::enable method.


1067821-1 : Stats allocated_used for region inside zxfrd is overflowed

Links to More Info: BT1067821

Component: Global Traffic Manager (DNS)

Symptoms:
No visible symptoms.

Conditions:
Large resource record addition and deletion for dns express zones.

Impact:
Internal zxfrd stats are incorrect.


1067797-1 : Trunked interfaces that share a MAC address may be assigned in the incorrect order.

Links to More Info: BT1067797

Component: TMOS

Symptoms:
Interfaces that are trunked together and use the same MAC address may end up in an incorrect order when the system is restarted.

Conditions:
Trunked interfaces that use the same MAC address. On reboot the f5-swap-eth script will incorrectly reorder the affected interfaces.

Impact:
Incorrect ordering could result in a failover or outage.

Workaround:
N/A


1067669-1 : TCP/UDP virtual servers drop all incoming traffic.

Links to More Info: BT1067669

Component: Local Traffic Manager

Symptoms:
-- Incoming TCP/UDP traffic is not processed by virtual servers on the BIG-IP system. Instead, legitimate traffic appears to be dropped by the BIG-IP system.

-- A tcpdump taken on the BIG-IP system shows the traffic arriving on VLAN 0 instead of the actual VLAN.

-- Inspection of the dns_rapid_response_global tmstat table shows many entries in the failed_ifc column.

Conditions:
-- Using a BIG-IP 2000, 4000, or VE device.

-- Using a trunk with an untagged VLAN.

-- Using a virtual server with a dns profile configured for rapid-response.

Impact:
All TCP/UDP virtual servers fail to process incoming traffic.

Workaround:
You can work around this issue by performing any one of the following actions:

-- Avoid using an untagged VLAN with your trunks.
-- Avoid using a trunk if you cannot avoid using untagged VLANs.
-- Disable rapid-response in all dns profiles (this option is disabled by default).


1067653-2 : Ndisc6 is not working with non-default route domain.

Links to More Info: BT1067653

Component: TMOS

Symptoms:
Ndisc6 within a Route-Domain (rdexec <rd-id> ndisc6
<ipv6-address> <interface-name>) does not work if the route domain ID passed is not the default route domain.

Conditions:
A non-default route domain is used and a VLAN is assigned to it.

Impact:
Neighbor discovery for the non-default route domain will not work.

Workaround:
N/A


1067589-3 : Memory leak in nsyncd

Links to More Info: BT1067589

Component: Application Security Manager

Symptoms:
The memory usage for nsyncd increases over time, forcing the device into OOM (out of memory).

Conditions:
-- High availability (HA) environment with ASM sync failover device group.
-- ASU files are being installed by Live Update.

Impact:
OOM activity causes random process restarts and disruption.

Workaround:
Restart the nsyncd daemon.


1067469-4 : Discrepancy in virtual server stats with LRO enabled.

Component: Local Traffic Manager

Symptoms:
The virtual_server_stat table has a discrepancy in clientside.bytes_out and serverside.bytes_in with LRO enabled.

Conditions:
LRO is enabled (sys db tm.tcplargereceiveoffload value "enable").

Impact:
The virtual_server_stat table shows a difference in clientside.bytes_out and serverside_bytes_in when LRO is enabled.

Workaround:
Disable LRO using the following command:
tmsh modify sys db tm.tcplargereceiveoffload value disable

After modifying that variable, the virtual server stats need to be reset in order to clear historical stats using the following command: tmsh reset-stats ltm virtual

Otherwise TMM can be restarted to clear the stats.


1067405-3 : TMM crash while offloading / programming bad actor connections to hardware.

Links to More Info: BT1067405

Component: Advanced Firewall Manager

Symptoms:
TMM crashes while passing traffic. From the core analysis, this issue looks specific to some platforms(i4800 c115).

Conditions:
This might occur when bad actor detection is enabled in BIG-IP platforms.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
This issue is platform specific and seen only when BA actor detection is enabled.


1067309-1 : GTMD cored followed by TMM core SIGSEGV due to illegal GTM server reference.

Links to More Info: BT1067309

Component: Global Traffic Manager (DNS)

Symptoms:
TMM, gtmd cores while passing traffic.

Conditions:
A rare race condition between TMM and GTMD occurs while passing traffic.

Impact:
Traffic disrupted while tmm and gtmd restarts.

Workaround:
N/A


1067025-4 : Rate-shaping + immediate timeout causing connection to stall.

Links to More Info: BT1067025

Component: Local Traffic Manager

Symptoms:
Server-side connection stalls if rate-limit is reached for a connection that has a timeout value set to immediate.

Conditions:
-- Rate-limit configured and reached.
-- Profile has immediate timeout configured.

Impact:
No packets are sent to the server.

Workaround:
Configure a timeout value on a protocol profile.


1066397-1 : GTM persists to last resort pool members even when primary pool members become available.

Links to More Info: BT1066397

Component: Global Traffic Manager (DNS)

Symptoms:
DNS Queries are persisted to the last resort pool members after the primary pool comes back.

Conditions:
-- WideIP with persistence enabled
-- Disable primary pool members with the queries answered from the last resort pool
-- Now re-enable the primary pool members

Impact:
DNS Queries are persisted to the last resort pool members after the primary pool comes back.

Workaround:
N/A


1065821-4 : Cannot create an iRule with a newline between event and opening brace.

Links to More Info: BT1065821

Component: TMOS

Symptoms:
POST-ing to the BIG-IP REST API fails when creating an iRule.

Conditions:
iRule body has a newline after the event name.

For example:
"apiAnonymous": "when HTTP_REQUEST\n {...}"

Working:
"apiAnonymous": "when HTTP_REQUEST {...}"

Impact:
The iRule fails to create and you receive a warning about an unknown property.

{
    "code": 400,
    "message": "\"{\" unknown property",
    "errorStack": [],
    "apiError": 26214401
}

Workaround:
Format the iRule to not use newlines between the event name and opening brace.

Change from:
"apiAnonymous": "when HTTP_REQUEST\n {...}"

To:
"apiAnonymous": "when HTTP_REQUEST {...}"


1065681-1 : Sensitive data is not masked under certain conditions.

Links to More Info: BT1065681

Component: Application Security Manager

Symptoms:
Sensitive data (or part of it) is visible in the request logs or the remote log.

Conditions:
A parameter that is defined as a JSON profile. That profile has the parse parameters flag set.

Impact:
Sensitive data is visible in the log.

Workaround:
There are 2 possible workarounds:
1. Make the parameter that contains the json a sensitive parameter.
2. In the json profile attached to the parameter, uncheck the parse parameters flag. You will see a tab of sensitive data added in the UI. In that tab, explicitly add the JSON element as a sensitive element.


1065353-1 : Disabling ciphers does not work due to the order of cipher suite.

Links to More Info: BT1065353

Component: Local Traffic Manager

Symptoms:
You are not able to disable a list of ciphers.

Conditions:
The cipher list is given in an order in the tmsh command 'tmm --clientciphers'

Impact:
Inconsistent behavior of the command "tmm --clientciphers".

Workaround:
Reorder the ciphers in the list and pass the reordered list to "tmm --clientciphers".


1065013-4 : Tmm crash with iRuleLX plugin in use

Links to More Info: BT1065013

Component: Local Traffic Manager

Symptoms:
Tmm runs out of memory and crashes.

Conditions:
Exact conditions that trigger this are unknown:

-- iRuleLX provisioned and configured in one or more virtual servers
-- Network traffic is passing

Impact:
Traffic disrupted while tmm restarts.


1064893-1 : Keymgmtd memory leak occurrs while configuring ca-bundle-manager.

Links to More Info: BT1064893

Component: TMOS

Symptoms:
Keymgmtd leaks memory and the RES/RSS value increases over time.

Same issue can be observed using top -p `pidof keymgmtd` or tmctl proc_pid_stat proc_name=keymgmtd -s proc_name,vsize,rss monitor keymgmtd resident memory size.

Conditions:
Configure sys crypto ca-bundle-manager to periodically update the ca bundle on the system.

Impact:
If keymgmtd causes a system wide out of memory condition, this could cause a traffic disruption, if mcpd is chosen to be killed.

Workaround:
N/A


1064753-4 : OSPF LSAs are dropped/rate limited incorrectly.

Links to More Info: BT1064753

Component: TMOS

Symptoms:
Some LSAs are dropped on BIG-IP with a log similar to:
"LSA is received recently".

Conditions:
Tuning OSPF min LSA arrival has no effect on some LSA handling.

Impact:
OSPF LSAs are dropped/rate limited incorrectly.

Workaround:
N/A


1064725-4 : CHMAN request for tag:19 as failed.

Links to More Info: BT1064725

Component: Local Traffic Manager

Symptoms:
The following log is seen in /var/log/ltm when a qkview is generated:

warning chmand[6307]: 012a0004:4: CHMAN request (from qkview) for tag:19 failed.

or when a tcpdump capture is started:

warning chmand[792]: 012a0004:4: CHMAN request (from bigpcapq33E5-24) for tag:19 failed

or when get a dossier from GUI/CLI:

warning chmand[4319]: 012a0004:4: CHMAN request (from get_dossier) for tag:19 failed

or when reboot:

warning chmand[8263]: 012a0004:4: CHMAN request (from mcpd) for tag:19 failed
warning chmand[8263]: 012a0004:4: CHMAN request (from DossierValidator) for tag:19 failed
warning chmand[8263]: 012a0004:4: CHMAN request (from LACPD_USER) for tag:19 failed
warning chmand[8263]: 012a0004:4: CHMAN request (from get_dossier) for tag:19 failed

Conditions:
Any one of the following:

-- Generate a qkview file from the GUI/CLI
-- Start a tcpdump command from the CLI
-- Get a dossier from GUI/CLI
-- Reboot

Impact:
No functional impact.

Workaround:
None


1064649-2 : Tmm crash after upgrade.

Links to More Info: BT1064649

Component: Local Traffic Manager

Symptoms:
After upgrading and provisioning the ASM module, TMM starts to crash and core.

Conditions:
-- BIG-IP system is upgraded to version 15.1.4.1.
-- The ARL table is empty (transparent VLAN group) and traffic is passed.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
N/A


1064257-2 : Bundled SSL certificates may not get revalidated successfully over OCSP after stapling parameters have been modified.

Links to More Info: BT1064257

Component: TMOS

Symptoms:
Bundled SSL certifcates fail to validate with an OCSP responder, and they are marked invalid in the GUI and tmsh.

Conditions:
1. One or more bundled certificates (containing intermediate certificates in addition to the subject one) are stored on the BIG-IP.
2. The certificates are configured for monitoring over OCSP.
2. The OCSP stapling parameter "Trusted Responders" is set to 'none'.

Impact:
Client SSL traffic may become disrupted if the affected certificates are used to process it.

Workaround:
1. Do not use OCSP status monitoring on subject certificates.
OR
2. Do not use bundled certificates.
OR
3. Set the Trusted Responders OCSP stapling parameter to the certificate of the OCSP responder used by the certificates.


1064205-1 : GSLB virtual server's status can't be changed from the drop-down selection box on its properties page.

Links to More Info: BT1064205

Component: Global Traffic Manager (DNS)

Symptoms:
The status of the GSLB virtual server associated with the GSLB server does not get changed through selection in the drop-down box in front of "Status".

Conditions:
1. Open the properties page of one GSLB virtual server after reaching from DNS ›› GSLB : Servers : Server List ›› Virtual Servers.
2. Change the value in the drop-down box in front of the "Status" field and click the "Update" button.

Impact:
The status of the GSLB virtual server can't be changed from its own properties page.

Workaround:
The status of one or multiple virtual servers can be changed on page DNS ›› GSLB : Servers : Server List ›› Virtual Servers by selecting the desired ones and selecting "Enable" or "Disable" buttons.


1064001-1 : POST request to a virtual server with stream profile and a access policy is aborted.

Links to More Info: BT1064001

Component: Access Policy Manager

Symptoms:
POST request to virtual server fails with reset cause "Incomplete chunked response".

Conditions:
Virtual server is configured with both stream profile and access policy.

Impact:
User will be unable to send POST request to backend servers

Workaround:
N/A


1063865-7 : Blade remains in an INOPERATIVE state after being moved to new chassis.

Links to More Info: BT1063865

Component: Local Traffic Manager

Symptoms:
When moving a blade to a new chassis, it can remain in an INOPERATIVE state upon startup. The following errors can be found in /var/log/ltm:

slot2 notice mcpd[7042]: 01071029:5: Master Key not present.
slot2 err csyncd[8163]: 013b0004:3: Unable to subscribe to mcpd, disconnecting...

Conditions:
- Multi-bladed BIG-IP systems
- Move a blade from one chassis to an open slot in the other chassis

Impact:
The moved blade will not properly sync up with the rest of the system, and remain INOPERATIVE.

Workaround:
This occurs due to the master key not being propagated to the moved blade. You can manually circumvent this by doing the following (this assumes slot 1 is primary and slot 2 has the moved blade):

Back up the master keys first (optional):
1. On the primary slot:
cp /config/bigip/kstore/master /var/tmp/master_slot1
2. On the moved slot:
cp /config/bigip/kstore/master /var/tmp/master_slot2

Copy the master key to the moved slot:
1. On the primary slot:
scp /config/bigip/kstore/master root@slot2:/config/bigip/kstore/master
2. On the moved slot:
bigstart restart mcpd


1063829-1 : Zxfrd could run out of memory because zone db files are not efficiently recycled.

Links to More Info: BT1063829

Component: Global Traffic Manager (DNS)

Symptoms:
Zxfrd is killed because of "Out of memory".

Conditions:
Dns express zones are updated continuously.

Impact:
Zxfrd keeps restarting.

Workaround:
Delete zxfrd files and restart zxfrd.
If sys db dnsexpress.hugepages is 0, run:
# rm -rf /shared/zxfrd/*
# bigstart restart zxfrd

 
If sys db dnsexpress.hugepages is 1, run:
# rm -rf /dev/mprov/zxfrd/*
# bigstart restart zxfrd


1063681-2 : PCCD cored, SIGSEGV in pc::cfg::CMessageProcessor::modify_fqdn.

Links to More Info: BT1063681

Component: Advanced Firewall Manager

Symptoms:
Pccd (Packet Correlation Classification Daemon) generates a core while adding a fqdn during testing.

Conditions:
Conditions to trigger the core are unknown.

Impact:
Pccd crashes and creates a core file.

Workaround:
Restart PCCD


1063653 : TMM Crash while processing traffic on virtual server.

Links to More Info: BT1063653

Component: Access Policy Manager

Symptoms:
TMM core while processing traffic on a virtual server.

Conditions:
iRule Execution during processing HTTP response.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
N/A


1063609 : Observed "Failed to start Jitterentropy Gatherer Daemon" during bootup

Links to More Info: BT1063609

Component: TMOS

Symptoms:
During PXE installation or software upgrades observes the following log at first-time bootup:

[FAILED] Failed to start Jitterentropy Gatherer Daemon.
[ 11.071830] See 'systemctl status jitterentropy-rngd.service' for details.systemd-fsck

Conditions:
- First bootup after PXE install.
- First bootup after software upgrade.

Impact:
The device will go for a reboot in the first bootup after PXE installation or software upgrade and stable from second bootup.

Workaround:
None


1063597-1 : Memory leak in rewrite in some cases when no pool is selected on virtual server

Links to More Info: BT1063597

Component: TMOS

Symptoms:
In some cases a memory leak may occur in rewrite when none of the pools are selected on a virtual server

Conditions:
-- Rewrite profile added to a virtual server
-- LTM pool not selected

Impact:
Memory allocated to rewrite will not be released resulting in exhaustion of all the available memory and system becoming us-stable

Workaround:
Ensure that a pool is always selected, this can be done by adding a default pool to the virtual server.


1063261-4 : TMM crash is seen due to sso_config objects.

Links to More Info: BT1063261

Component: Access Policy Manager

Symptoms:
Observed a TMM crash once which is due to unfreed sso_config objects in SAML.

Conditions:
Conditions are unknown, this was only seen once.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
N/A


1063237-4 : Stats are incorrect when the management interface is not eth0

Links to More Info: BT1063237

Component: TMOS

Symptoms:
The provision.managementeth db variable can be used to change which interface the management interface is bridged to:

https://clouddocs.f5.com/cloud/public/v1/shared/change_mgmt_nic_google.html

If this is changed to something other than eth0, the management interface stats will continue to be read from eth0 and thus be incorrect.

Conditions:
When provision.managementeth is changed to something other than eth0.

Impact:
Management interface stats are incorrect.

Workaround:
Reconfigure the management interface to use eth0


1063173-2 : Blob size consistency after changes to pktclass.

Links to More Info: BT1063173

Component: Performance

Symptoms:
Blob size grows after making changes to pktclass that should reduce the size.

Conditions:
Making changes to pktclass.

Impact:
The BIG-IP system premature hits blob size limits while making changes which can result in validation issues preventing the pktclass from loading.

Workaround:
Change sys db key "pccd.alwaysfromscratch" to true.


1062953-1 : Unable to save configuration via tmsh or the GUI.

Links to More Info: BT1062953

Component: TMOS

Symptoms:
If there are hundreds of partitions and changes to the configuration are made via the GUI, the configuration save can hang. When the configuration save hangs, all subsequent configuration saves will not complete.

Conditions:
-- Hundreds of partitions with objects contained in them.
-- Changing config via the GUI.

Impact:
Subsequent attempts to save the configuration will not complete.

Workaround:
For this scenario, syscalld is the process that created
the tmsh process to save the config where the tmsh process hangs. A restart of syscalld using bigstart restart syscalld will kill the hung syscalld and tmsh processes and restore services.


1062901-1 : The 'trap-source' and 'network' SNMP properties are ineffective, and SNMP traps may be sent from an unintended interface.

Links to More Info: BT1062901

Component: TMOS

Symptoms:
The BIG-IP system sends SNMP traps from an unintended interface (likely a TMM VLAN instead of the management port).

Conditions:
This issue occurs when the configuration:

- Includes a 'trap-source' property which matches the BIG-IP system's management IP address.

- Includes a SNMP trap destination which specifies 'mgmt' as the 'network' property.

- Includes routes to the aforementioned SNMP trap destination via both tmm and the management port (and the routes are such that the tmm one wins).

Impact:
Outgoing snmp traps fail to bind to the management IP address and to leave from the management port. Instead, they will bind to a self-ip matching TMM's route to the destination and leave from a TMM VLAN.

This can cause issues (or not work at all) depending on the configuration of the host system meant to receive the traps and/or of the surrounding network devices.

Workaround:
N/A


1062857-3 : Non-tmm source logs stop populating after a system time change.

Links to More Info: BT1062857

Component: TMOS

Symptoms:
Syslog-ng service functionality leads to failures like no daemon logs being captured in files like
- /var/log/ltm and
- /var/log/messages.

Conditions:
Change the system date and time to future or past, and then reboot the system.

Impact:
Expected TMM logs rest all daemons logs are not captured at /var/log/ltm, due to syslog-ng failure.

Workaround:
None


1062385-4 : BIG-IP has an incorrect limit on the number of monitored HA-group entries.

Links to More Info: BT1062385

Component: TMOS

Symptoms:
BIG-IP has an incorrect limit on the number of monitored HA-group entries.

Conditions:
Large amount of traffic groups (over 50) with high availability (HA) Group monitoring attached.

Impact:
Not all traffic groups are properly monitored. Some traffic groups might not fail-over properly.

Workaround:
N/A


1062105-3 : For specific configurations (Auto-Added Signature Accuracy and Case Sensitive parent policy), child security policy fails to create.

Links to More Info: BT1062105

Component: Application Security Manager

Symptoms:
1. Creation of child security policy fails when it should not.
2. GUI shows wrong value for Auto-Added Signature Accuracy in creation page of the child policy.

Conditions:
1. Create a parent policy with the following settings:

   - Policy is Case Sensitive set to disable.
   - Auto-Added Signature Accuracy set to low.

Note: these values are not the default values related to the template used in the policy. For example: Fundamental, Comprehensive, and RDP templates.

2. Try to create a policy using the above parent policy.

Impact:
Creation of child policy

Workaround:
Send REST command with minimumAccuracyForAutoAddedSignatures field under 'signature-settings' and not from the outer level.


1061905-3 : Adding peer unit into device trust changes the failover address family.

Links to More Info: BT1061905

Component: TMOS

Symptoms:
In Device Management >> Devices >> [self device] > Failover Network.
Address Family Mode resets back to "IPv4 & IPv6" instead of already set configuration i.e. IPv4 when a new peer unit is added.

Conditions:
-- Add a new device into the device trust.
-- Set both devices to "IPv4".
-- Join the devices in device trust.

Impact:
Inconsistent configuration

Workaround:
Modify the address family to IPv4 manually after adding the peer.


1060833-2 : After handling a large number of connections with firewall rules that log or report translation fields or server side statistics, TMM may crash.

Links to More Info: BT1060833

Component: Advanced Firewall Manager

Symptoms:
TMM crashes.

The 'virt_cnt' column in the tmctl 'string_cache_stat' table continues to grow over time, and diverges significantly from the 'phys_cnt' column.

Conditions:
-- Enforced AFM firewall policies configured in multiple contexts (global, route domain, virtual server)

-- Large number of connections that matches rules in multiple contexts

-- AFM configured in at least one of the following ways:

--+ Stats collection enabled and collecting server-side stats enabled. Stats collection is enabled by default. Collecting server-side statistics ("security analytics settings acl-rules { collect-server-side-stats }") is not enabled by default.
--+ ACL logging enabled, and the logging of translation fields enabled.

Impact:
Traffic is disrupted while TMM restarts.

Workaround:
Disable logging and reporting of server-side information in AFM firewall ACLs.

After making these changes, it may be necessary to restart TMM once.


1060769-1 : The /mgmt/tm/sys/performance/all-stats and /mgmt/tm/sys/performance/throughput iControl REST endpoints cannot be successfully parsed by common JSON libraries.

Links to More Info: BT1060769

Component: TMOS

Symptoms:
Because of identically-named key/value pairs in the "entries" object returned by the /mgmt/tm/sys/performance/all-stats and /mgmt/tm/sys/performance/throughput iControl REST endpoints, the output of these endpoints cannot be successfully parsed by common JSON-parsing libraries.

Only the key/value pair appearing last for a given name is returned by common JSON-parsing libraries.

As a result, the In/Out/Service sections of the output, which should show both Throughput(bit) and Throughput(packets) only shows Throughput(packets).

Conditions:
Querying the /mgmt/tm/sys/performance/all-stats or /mgmt/tm/sys/performance/throughput iControl REST endpoints.

Impact:
Common JSON-parsing libraries are unable to extract all of the information contained in the JSON blob (only a subset of the information is returned).

Workaround:
If possible, use the TMSH utility from the CLI of the BIG-IP system to display the complete information.


1060721-2 : Unable to disable auto renew in Certificate order manager via GUI.

Links to More Info: BT1060721

Component: TMOS

Symptoms:
From the GUI, you are unable to disable auto-renew on the certificate order manager.

Conditions:
In the GUI navigate to System > Certificate Management > Traffic Certificate Management > Certificate Order Manager List > Create.
Then select the any certificate Authority items, then disable Auto-renew.

Impact:
In Certificate order manager, auto-renew can not be disabled from the GUI.

Workaround:
Issue the following command from tmsh to disable auto-renew in cert-order manager.

tmsh modify sys crypto cert-order-manager <cert_order_manager_name> auto-renew no


1060541-1 : Increase in bigd CPU utilization from 13.x when SSL/TLS session resumption is not utilized by HTTPS pool members due to Open SSL upgrade

Links to More Info: BT1060541

Component: Local Traffic Manager

Symptoms:
The bigd process uses more CPU than it did in previous versions when HTTPS monitors are used for pool members and the pool members do not resume the SSL/TLS session. This is due to upstream changes in the OpenSSL library.

Conditions:
-- HTTPS monitors.
-- Pool members that do not allow or are not using TLS/SSL session resumption.

Impact:
High CPU utilization.

Workaround:
Ensure the pool members have SSL/TLS session resumption enabled.


1060393-1 : Extended high CPU usage caused by JavaScript Obfuscator.

Links to More Info: BT1060393

Component: Fraud Protection Services

Symptoms:
The Obfuscator process (compiler.jar) consumes excessive CPU for an extended period.

Conditions:
FPS is provisioned

OR:
ASM is provisioned
AND:
Bot profile is attached to VS
OR
ASM Policy with brute force feature enabled is attached to VS
OR
DoS profile with Captcha/CSI mitigation is attached to VS

Impact:
High CPU usage on the device.

Workaround:
None


1060369-1 : HTTP MRF Router will not change serverside load balancing method

Links to More Info: BT1060369

Component: Local Traffic Manager

Symptoms:
Selecting a different load balancing mechanism (i.e. an iRule or Local Traffic Policy selecting a different pool/node, the "virtual" command, etc) does not work for subsequent HTTP/1.x requests on a keep-alive connection.

Conditions:
-- "HTTP MRF Router" virtual server (virtual server has an "httprouter" profile attached)
-- Virtual server is handling HTTP/1.x traffic

Impact:
Traffic is load-balanced to incorrect destination.

Workaround:
None.


1060181-3 : SSL handshakes fail when using CRL certificate validator.

Links to More Info: BT1060181

Component: TMOS

Symptoms:
Some SSL handshakes are reset with "SSL Handshake timeout exceeded" reset.

Conditions:
Client SSL profile with CRL certificate validator.
Client SSL certificate authentication enabled.

Impact:
SSL handshakes fail.

Workaround:
None


1060145-1 : Change of virtual IP from virtual-server-discovery leads to mcp validation error on slot 2.

Links to More Info: BT1060145

Component: Global Traffic Manager (DNS)

Symptoms:
When secondary slot reboots and it gets the configuration from the primary blade, the secondary throws a validation error and enters into a restart loop.

The following error is logged:

Configuration error: Configuration from primary failed validation: 01020036:3: The requested monitor instance (/Common/bbt-generic-bigip 10.1.10.12 80 gtm-vs) was not found.... failed validation with error 16908342.

Conditions:
-- Change the virtual server address on the LTM (manual edit of bigip.conf and load).

-- Reboot the secondary slot.

Impact:
Mcpd enters a restart loop on the secondary slot.

Workaround:
N/A


1060057-2 : Enable or Disable APM dynamically with Bados generates APM error

Links to More Info: BT1060057

Component: Anomaly Detection Services

Symptoms:
When APM & Bados configured together while APM is being enabled or disabled externally (which is an IRule). This will end up with an APM Error.

Conditions:
APM & Bados configured together while APM is being enabled/disabled externally (which is an IRule). This will end up with an APM Error.

Impact:
Unable to apply Application DoS profile to an existing APM Network Access setup.

Workaround:
No workaround. Do not enable or disable APM with iRules if Bados configured.


1060029-1 : MRHTTP proxy can leak init_args and attached streams/flows.

Links to More Info: BT1060029

Component: Local Traffic Manager

Symptoms:
TMM memory increases while passing HTTP/2 traffic.

Conditions:
-- Virtual Server with httprouter and http2 only on the client side
-- iRule attached:
when HTTP_REQUEST {
    if {[HTTP::uri] contains ".html"} {
        set reject 1
    }
}

when MR_INGRESS {
    if {[info exists reject]} {
        HTTP::disable
    }
}

when HTTP_DISABLED {
    if {[info exists reject]} {
        reject
    }
}

-- http2 traffic arrives in persistent connections

Impact:
TMM memory leak, resulting in aggressive sweeper.

Workaround:
N/A


1060021-1 : Using OneConnect profile with RESOLVER::name_lookup iRule might result in core.

Links to More Info: BT1060021

Component: Local Traffic Manager

Symptoms:
Tmm might core while using a OneConnect profile with iRule command RESOLVER::name_lookup.

Conditions:
1. One connect profile attached.
2. iRules with RESOLVER::name_lookup command.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Don't use RESOLVER::name_lookup iRule on virtual that uses the oneconnect profile.


1059573-4 : Variation in a case insensitive value of an operand in LTM policy may fail in some rules.

Links to More Info: BT1059573

Component: Local Traffic Manager

Symptoms:
LTM policy engine compiles a policy into a state machine. If there is a variation of the same case insensitive value for an operand, the state machine may fail to properly build all rules, using this value. An example of a variation is a list of words like "Myself", "myself", "MYself", "mySElf", "MYSELF".

Conditions:
-- LTM policy is configured and attached to a virtual server.
-- The policy has variation in a case insensitive value of an operand.

Impact:
An expected rule does not apply: either a wrong rule is applied, or no rule is applied, causing incorrect traffic processing.

Workaround:
Eliminate variation in any case insensitive value of any operand. For example, replace all variations in the mentioned list with "myself".


1059513-1 : Virtual servers may appear as detached from security policy when they are not.

Links to More Info: BT1059513

Component: Application Security Manager

Symptoms:
When browsing Security >> Overview: Summary page, the virtual servers may appear as detached. The larger the number of virtual servers are, the more likely you are to see all the virtual servers as detached from the security policy.

Conditions:
From a certain amount of virtual servers (20) that are attached to a security policy, the virtual servers may appear as detached from any security policy.

Impact:
Virtual servers are displayed as detached from any security policy, but this is not the case.

Workaround:
None


1059421-4 : Bot Signature is not updated when the signature rule is updated.

Component: Application Security Manager

Symptoms:
In some cases, when you update a user-defined Bot Signature rule, the new rule is not applied.

Conditions:
-- Bot Defense profile is attached to virtual server
-- A user-define bot signature is updated

Impact:
Updated signature is not enforced.

Workaround:
-Delete the Bot Signature rule
-Add another Bot Signature rule
-Check to see that all changes are applied


1059293-1 : During DPD config changes, the IKEv2 tunnel may not start.

Links to More Info: BT1059293

Component: TMOS

Symptoms:
One peer does not come up.

Conditions:
Continuously changing the timer values, i.e. phase1, phase2 and DPD values.

Impact:
The BIG-IP system may be unable to establish a tunnel for one peer.

Workaround:
N/A


1058905-1 : TMM crash as a result of "LB::detach" in an iRule on an MR HTTP configuration.

Links to More Info: BT1058905

Component: Service Provider

Symptoms:
TMM crashes on the second HTTP request to a virtual server when the "LB::detach" command is executed in an iRule when using an MR HTTP configuration.

Conditions:
-- A virtual server in an MR HTTP configuration.
-- "LB::detach" present in an iRule attached to that virtual server.

Impact:
Traffic disrupted while TMM restarts.

Workaround:
N/A


1058873 : Configuring Source Address as "address list" in a virtual server causes apmd to restart.

Links to More Info: BT1058873

Component: Access Policy Manager

Symptoms:
Apmd keeps restarting. Clients get denied message.

/var/log/apm will show the following errors:

01490000:5: ha_util.cpp func: "getTgInfoByVAddrName()" line: 292 Msg: MCP query failed (error 0x1020036)

01490000:3: DeviceHA.cpp func: "checkApmTrafficGroup()" line: 35 Msg: HA util returns err 3

01490000:3: ApmD.cpp func: "main_loop()" line: 851 Msg: Check APM traffic group failed

Conditions:
At least one virtual server configured to use APM has its source or destination address configured as "address list".

Impact:
Clients are unable to connect to the BIG-IP.

Workaround:
Don't use "address list" while configuring the source IP address of a virtual server that has an access policy attached.


1058789-2 : Virtual addresses are not created from an address list that includes an IP address range.

Links to More Info: BT1058789

Component: TMOS

Symptoms:
The virtual address is listed as offline regardless of the status of the virtual server. This makes understanding virtual-address status very difficult.

Conditions:
Create virtual server using a traffic-matching-criteria (TMC) address list.

Impact:
The virtual addresses are created but the BIG-IP system shows all of them as offline enabled regardless of the status of the virtual server.

Workaround:
None


1058765-2 : Virtual Addresses created from an address list with prefix all say Offline (enabled)

Links to More Info: BT1058765

Component: TMOS

Symptoms:
Virtual Addresses created from an address list with prefix all say Offline (enabled)

Conditions:
Using the prefix in the address-list which is used for virtual server configuration.

Impact:
Improper status of the virtual address.


1058665-1 : Bot signature with a semicolon followed by a space is not detected.

Links to More Info: BT1058665

Component: Application Security Manager

Symptoms:
When creating a user-defined Bot Signature, semicolon followed by space cannot be used.

Conditions:
-- Using a user-defined Bot Signature in Simple mode.
-- There is a semicolon followed by a space in the User-Agent or URL sections.

Impact:
The signature is not detected.

Workaround:
Escaping the semicolon in the signature created as "|3B|".


1058645-2 : ipsecalg blocks Sophos ISAKMP negotiation during tunnel setup.

Links to More Info: BT1058645

Component: Advanced Firewall Manager

Symptoms:
Sophos IPsec clients cannot connect to a Sophos firewall when ipsecalg is configured on the forwarding virtual server.

The Sophos client initially attempts to start the tunnel using aggressive mode. The Sophos firewall does not support remote users attempting aggressive mode and responds with Notify Message Type INVALID-PAYLOAD-TYPE. The tunnel setup cannot proceed correctly after that point.

Conditions:
-- Sophos client is installed on remote user devices.
-- Sophos firewall is the remote endpoint in the IPsec tunnel.

Note: The Sophos client and firewall combination is the only known failing use-case.

Impact:
Sophos clients cannot start an IPsec tunnel.

Workaround:
The Sophos client cannot be configured to use main mode instead of starting with aggressive mode. The Sophos firewall does not support aggressive mode for remote user IPsec tunnels.

Therefore, create an iRule and add the iRule to the ipsecalg virtual server. The iRule simply contains this:

when SERVER_DATA {
# Only execute on first server side packet of conflow.
event disable

if { [UDP::payload length] < 40 } { return; }
binary scan [UDP::payload] x8x8cH2cx9x10S payload_type ver exch_type noti_type

# Depending on throughput, the amount of logging here may be problematic
#log local0. "payload_type : $payload_type"
#log local0. "ver : $ver"
#log local0. "exch_type : $exch_type"
#log local0. "noti_type : $noti_type"

if { $payload_type == 11 && $ver == 10 && $exch_type == 5 && $noti_type == 1 } {
log local0. "Closing ipsecalg connection"
after 1 { reject }
}
}


1058597-5 : Bd crash on first request after system recovery.

Links to More Info: BT1058597

Component: Application Security Manager

Symptoms:
Bd crashes on the first request.

Conditions:
The system is out of disk space while creating the ASM policy.

Impact:
The security configuration is incomplete with missing data.

Workaround:
-- Remove the ASM policy from the virtual server to avoid the bd crash.
-- Go to the cookie protection screen and reconfigure the secure and fast algorithm.
-- Re-attach the security policy to the virtual server.


1058349-3 : Requirement of new signatures to detect IMO and Google Duo service.

Component: Traffic Classification Engine

Symptoms:
Google Duo voice call and IMO applications are not blocking.

Conditions:
On Latest IM with PEM policy and TC policy.

Impact:
Traffic throttling will not work on IMO and DUO app.

Workaround:
N/A


1057925-4 : GTP iRule generates a warning.

Links to More Info: BT1057925

Component: TMOS

Symptoms:
Merging GTP config generates a warning.

cat ltm rule GTP_Rate_Limmit {
when CLIENT_DATA {

        set gtp_message [GTP::parse [UDP::payload]]
        set ie_list [GTP::ie get list -message $gtp_message -type 87]
        #set ie_list [GTP::ie get list -type 97 -message $gtp_message]


        foreach ie $ie_list {

                set fteid_value [lindex $ie 5]
                set interface_type [lindex $fteid_value 2]
                set ipv4_addr [lindex $fteid_value 4]

                log local0. "$fteid_value,$interface_type,$ipv4_addr"

        }

}
}
ltm rule GTP_Rate_Limmit {
when CLIENT_DATA {

        set gtp_message [GTP::parse [UDP::payload]]
        set ie_list [GTP::ie get list -type 87 -message $gtp_message]

        foreach ie $ie_list {

                set fteid_value [lindex $ie 5]
                set interface_type [lindex $fteid_value 2]
                set ipv4_addr [lindex $fteid_value 4]

                log local0. "$fteid_value,$interface_type,$ipv4_addr"

        }

}
}


root@(sr)(cfg-sync Standalone)(Active)(/Common)(tmos)# load sys config merge file gtprule.conf
Merging GTP rule config generates warning.

 /var/local/scf/gtprule.conf
There were warnings:
/Common/GTP_Rate_Limmit:4: warning: [The following errors were not caught before. Please correct the script in order to avoid future disruption. "invalid '-type'; expected:-message"93 47][GTP::ie get list -type 87 -message $gtp_message]

Conditions:
This error occurs every the time the GTP config is merged.

Impact:
Config merge shows a warning.

Workaround:
Change
set ie_list [GTP::ie get list -type 87 -message $gtp_message]
to
set ie_list [GTP::ie get list -message $gtp_message -type 87]


1057713-2 : "South Sudan" is missing from the ASM Geolocation Enforcement list.

Component: Application Security Manager

Symptoms:
South Sudan is not available as a selection in ASM's Geolocation Enforcement configuration.

Conditions:
South Sudan was not added into ASM database.

Impact:
There is no way to set the country code for "South Sudan" under 'Allowed Geolocations.'

Workaround:
N/A


1057709-4 : Invalid Certificate for all BIG-IP VE OVA images on vCenter 7.0U2.

Links to More Info: BT1057709

Component: TMOS

Symptoms:
When deploying all BIG-IP VE OVA/OVF images, vCenter 7.0U2 will display an invalid certificate (not trusted) warning message. This is due to enhanced signing certificate verifications for expiry, and other validity checks for the entire chain of the signing certificate against the VECS store (known vCenter issue https://kb.vmware.com/s/article/84240).

Conditions:
Login to vCenter 7.0U2, deploy a BIG-IP VE using an OVF template, select the Local File option, upload the OVA template from your local directory, and then follow the prompts to complete the deployment. In the review details section, "The certificate is not trusted" warning message appears.

Impact:
You can ignore the message and continue with the deployment, or add the missing signing certificate(s) to the VECS store.

Workaround:
To avoid this warning, do the following to add the signing certificate to the VECS store:

1. Get the OVF/OVA signing certificate's chain (root CA and intermediate certificates, if any). You can use any certificate chain resolver to find the missing certificates from the chain.
2. To add the intermediate and root certificates to VECS store:
    a. login to vCenter as administrator.
    b. From drop-down menu select administration -> Certificates -> Certificate Management.
    c. Click ADD next to Trusted Roots Certificates.
    d. Browse and select the certificate(s) found in step 1.


1057561 : Occasional Nitrox5 zip engine hang.

Links to More Info: BT1057561

Component: Local Traffic Manager

Symptoms:
Occasionally the Nitrox5 zip engine hangs.

In /var/log/ltm:
crit tmm12[24794]: 01010025:2: Device error: n5-compress1 Nitrox 3, Hang Detected: compression device was reset (pci 09:01.5, discarded 1).

Conditions:
BIG-IP appliance that uses the Nitrox 5 hardware compression chip: i11800.

You can check if your platform has the nitrox5 by running the following command:

tmctl -w 200 compress -s provider

provider
--------
bzip2
lzo
nitrox5 <----
qat-com
zlib

Impact:
The Nitrox5 hardware compression system becomes unavailable and the compression mode switches to software compression. This can lead to high CPU usage.

Workaround:
Disable http compression


1057557-5 : Exported policy has greater-than sign '>' not escaped to '&gt;' with response_html_code tag.

Links to More Info: BT1057557

Component: Application Security Manager

Symptoms:
The greater-than sign '>' is not escaped/converted to '&gt;' with response_html_code tag.

Having an un-escaped greater-than sign can cause issues when re-importing the policy, if the greater-than sign appears in a specific sequence, ']]>'. In other words, if the greater-than sign does not appear in the specific sequence, you can successfully re-import the policy without problem.

The specific sequence can be possible with a custom response page configuration. If you modify the custom response page in the way it has a sequence of characters ']]>', as the greater-than sing won't be escaped due to this bug, the exported policy has the sequence of characters ']]>' as is. Note: what it should be is ']]&gt;'

']]>' in xml is CDATA End delimiter and not allowed. The exported policy causes parser error and can not be re-imported.

Conditions:
This issue occurs if you modify the default custom response page where this specific character sequence is observed ']]>'.

Impact:
The exported policy cannot be re-imported.

Workaround:
This workaround forces the greater-than sing to be escaped to '&gt;' so that that policy can be re-imported without problem.

- make /usr writable
# mount -o remount,rw /usr

- backup
# cp /usr/local/share/perl5/F5/ExportPolicy/XML.pm /usr/local/share/perl5/F5/ExportPolicy/XML.pm.orig

- see this line exists
# grep "gt;" /usr/local/share/perl5/F5/ExportPolicy/XML.pm
            $xml =~ s/&gt;/>/g;

- delete the line and verify
# sed -i '/$xml =~ s\/&gt;.*/d' /usr/local/share/perl5/F5/ExportPolicy/XML.pm

- should not see the line
# grep "gt;" /usr/local/share/perl5/F5/ExportPolicy/XML.pm

- move /usr read-only
mount -o remount,ro /usr

- make the change in effect
# pkill -f asm_config_server


1057501-4 : Expired DST Root CA X3 resulting in http agent request failing.

Links to More Info: BT1057501

Component: TMOS

Symptoms:
When the DST Root CA X3 is expired, any HTTP agent request fails with the error:

err tmm2[19302]: Rule /Common/my_rule <HTTP_REQUEST>: Client - <address>, failure :proxyInterstitialPage: FetchError: request to <url> failed, reason: certificate has expired.

Conditions:
The DST Root CA X3 certificate is expired, see
https://letsencrypt.org/docs/dst-root-ca-x3-expiration-september-2021/.

Impact:
ILX plugins that reply on outbound HTTP client/agent requests to remote servers fail.

Workaround:
Create a /var/tmp/isrgrootx1.pem with contents of https://letsencrypt.org/certs/isrgrootx1.pem.txt.

The Node.js script:
# cat /var/tmp/CustomCA-2.js
var fs = require('fs');
var https = require('https');
var options = {
    hostname: 'letsencrypt.org',
    port: 443,
    path: '/',
    method: 'GET',
    ca: fs.readFileSync('/var/tmp/isrgrootx1.pem') <<<<<<<<<<<<<<< incorporated CA thus bypassing the CA embedded in the EOL version of Node.js
};
var req = https.request(options, function(res) {
    res.on('data', function(data) {
        console.log("PASS");
    });
});
req.end();


1057305-1 : On deployments that use DPDK, "-c" may be logged as the TMM process/thread name.

Links to More Info: BT1057305

Component: TMOS

Symptoms:
"-c" may be logged as the process/thread name on deployments that use DPDK:

notice -c[17847]: 01010044:5: Gx feature is not licensed
notice -c[17847]: 01010044:5: LTM Transparent feature is licensed
notice -c[17847]: 01010044:5: NAT feature is licensed

Conditions:
- BIG-IP Virtual Edition using XNET with DPDK. This can be AWS, Mellanox, or Cisco eNIC.

Impact:
Confusing logging.

Workaround:
N/A


1056941-2 : HTTPS monitor continues using cached TLS version after receiving fatal alert.

Links to More Info: BT1056941

Component: Local Traffic Manager

Symptoms:
After an HTTPS monitor completes successfully, the TLS version is cached and used for subsequent monitor probes.
If the back end server TLS version changes between monitor polls and no longer allows the cached TLS version, the back end server correctly sends a fatal alert to the BIG-IP in response to the no longer allowed TLS version.
The BIG-IP will continue to use the cached, now prohibited, version in all subsequent probes resulting in a false down resource until the cached information is cleared on the BIG-IP.

Conditions:
ClientSSL profile is changed on backend BIG-IP device's virtual server,

Impact:
BIG-IP continues to send prohibited TLS version and reports the member as down.

Workaround:
-- Delete and re-add pool member.
-- Change HTTPS monitor to any other monitor (including another HTTPS monitor) and then back.
-- Restart bigd with "bigstart restart bigd" - Note that this impacts all monitoring on the BIG-IP.
-- Restart BIG-IP - Note that this impacts all traffic on the BIG-IP.


1055077-1 : Modifying the datacenter does not check GTM server configuration for prober-pool.

Links to More Info: BT1055077

Component: Global Traffic Manager (DNS)

Symptoms:
If GTM is in a bad configuration state, the reload can fail with an error similar to this:

01071b63:3: The prober fallback value for server /Common/server1 cannot be the same as the inherited prober preference value.
Unexpected Error: Validating configuration process failed.

or

01071b62:3: The prober preference value for server /Common/server2 cannot be the same as the inherited prober fallback value.
Unexpected Error: Validating configuration process failed.

Conditions:
1. GSLB server has a prober-pool and inherits the datacenter selected for prober preference or prober fallback (it does not matter which prober configuration has which value).
2. GSLB datacenter is modified such that the prober configuration inherited by the constituent GSLB server is changed from a non-pool method to prober-pool.

This results in the GSLB server having a prober-pool probe configuration manually configured and another prober-pool probe configuration inherited from the GSLB datacenter.

Impact:
Two prober-pool configurations for a GSLB server is a prohibited state. Once this state is reached, any action that tries to validate the configuration (like a configuration load) will fail. This can cause the BIG-IP to fail to load configuration or cause a UCS restore to fail.

Workaround:
Review the configured and inherited prober configuration state of all GSLB servers whose parent GSLB datacenter has a prober-pool configured for it's prober preference or prober fallback. If any GSLB servers are affected, change their prober configuration so that only a single prober-pool configuration exists; or, you can change the parent GSLB server to no longer use the prober-pool method.


1055053-4 : "tmsh load sys config default" does not clear Zebos config files.

Links to More Info: BT1055053

Component: TMOS

Symptoms:
Typing the command: "tmsh load sys config default" does not clear Zebos config files.

Conditions:
- Dynamic routing in use.
- Loading default configuration with "tmsh load sys config default"

Impact:
Zebos configuration files still contain configuration after restoring default config.

Workaround:
Manually delete the Zebos configuration before running "tmsh load sys config default".


1054677-1 : Ng_export fails for users with the 'pager' option enabled in their 'cli preference' configuration.

Links to More Info: BT1054677

Component: Access Policy Manager

Symptoms:
For users with pager enabled, some lines are missing in the ng-export.conf file.

Conditions:
For your CLI preference, the 'pager' option is set to enabled.

Impact:
When 'pager' is set to enabled, you will be unable to export Access policies.

Workaround:
Disable the 'pager' option in 'cli preference' config for the affected user.


1054497-1 : Tmsh command "show sys fpga" does not report firmware for all blades.

Links to More Info: BT1054497

Component: TMOS

Symptoms:
After upgrading or forcing a reload of the configuration, the tmsh command "show sys fpga" does not report the firmware for all blades.

Conditions:
- Mutli-blade VIPRION or vCMP guest.
- Upgrade or forced reload of the configuration

Impact:
The tmsh command "show sys fpga" does not report firmware information for all blades.

Workaround:
Use the following command to restart chmand on the blade that is not reporting the firmware information:
bigstart restart chmand


1053741-4 : Bigd may exit and restart abnormally without logging a reason

Links to More Info: BT1053741

Component: Local Traffic Manager

Symptoms:
Certain fatal errors may cause the bigd daemon to exit abnormally and restart to recover.
For many such fatal errors, bigd logs a message in the LTM log (/var/log/ltm) indicating the fatal error that occurred.
For some causes, no message is logged to indicate what error occurred to cause big to exit abnormally and restart

Conditions:
This may occur when bigd encounters a fatal error when monitoring LTM pool members, particularly (although not exclusively) when using In-TMM monitor functionality (sys db bigd.tmm = enable).

Impact:
It may be difficult to diagnose the reason that caused bigd to exit abnormally and restart.

Workaround:
To enable logging of all fatal errors that cause bigd to exit abnormally and restart, enable bigd debug logging:

tmsh modify sys db bigd.debug value enable

With bigd debug logging enabled, bigd messages (including such fatal errors) will be logged to /var/log/bigdlog


1053605-2 : When you use NAT, the iQuery status displays 'BIGIP' instead of 'BIGIP-DNS'.

Links to More Info: BT1053605

Component: Global Traffic Manager (DNS)

Symptoms:
Use the 'show gtm iquery' command. The 'Server Type' for the connection to its own box may show as "BIGIP" rather than "BIGIP-DNS", even though DNS is provisioned on that device.


   # tmsh show gtm iquery
   ----------------------------------------
   Gtm::IQuery: 10.0.0.1
   ----------------------------------------
   Server GTM1
   Server Type BIG-IP <--
   ...
   ...
   ...


Note: Other BIG-IP DNS devices in the same sync group will correctly show the status as 'BIGIP-DNS'.

Conditions:
This occurs in the following conditions:

 - The gtm server has both an address and a translation defined.
 - The BIG-IP running the command is the same device being viewed (that is, it is showing its own status).
 

For example:

   gtm server GTM1 {
      devices {
         GTM1 {
            address { 10.0.0.1 { translation 192.168.1.1 } }
         }
      }
      ...
   }

Impact:
This is purely cosmetic, and does not affect the operation of the iQuery protocol.

Workaround:
N/A


1053589-1 : DDoS functionality cannot be configured at a Zone level

Links to More Info: BT1053589

Component: Advanced Firewall Manager

Symptoms:
DDoS functionality is supported at the global and virtual server level.

Conditions:
DDoS functionality configured on the BIG-IP system.

Impact:
Cannot enable DDoS at the Zone level.

Workaround:
N/A


1053305-2 : TMM crashes with assertion "vmem_hashlist_remove not found."

Links to More Info: BT1053305

Component: Local Traffic Manager

Symptoms:
TMM crashes and restarts.

Conditions:
Unknown.

Impact:
Traffic is disrupted while TMM restarts.

Workaround:
None


1053037-7 : MCP error on loading a UCS archive with a global flow eviction policy

Links to More Info: BT1053037

Component: TMOS

Symptoms:
Attempting to load a UCS archive with a global flow eviction policy results in an error like the following.

loaddb[3609]: 01080023:3: Error return while getting reply from mcpd: 0x1070911, 01070911:3: The requested flow_eviction_policy object (/Common/otters) does not exist for global_flow_eviction_policy in ltm (/Common/ltm)
Error 0x1070911 occurred: 01070911:3: The requested flow_eviction_policy object (/Common/otters) does not exist for global_flow_eviction_policy in ltm (/Common/ltm)

Despite this error, restoring the UCS archive continues on, and may succeed.

Conditions:
-- Loading a UCS archive with a non-default global-flow-eviction-policy configured.
-- The existing configuration on the BIG-IP system does not define the same eviction policy.

Impact:
The above mentioned error message is printed to the logs.
It should be safe to ignore the error if the UCS otherwise loads successfully.

Workaround:
Ignore the error message.


1051589-1 : Missing configuration after upgrade

Component: Application Security Manager

Symptoms:
After a successful UCS load, some parts of the security configuration are missing.

Conditions:
-- ASM provisioned
-- Limited disk space in /shared
-- Upgrade or create and then install a UCS

Impact:
A device after upgrade or UCS install is missing some of the security configuration.

Workaround:
Clear out disk space in /shared before attempting an upgrade or creating a UCS


1051153-4 : DHCP fails intermittently when the connection is through BIG-IP.

Links to More Info: BT1051153

Component: Local Traffic Manager

Symptoms:
DHCP DISCOVER packets are received, load balanced to the back end DHCP server, a DHCP OFFER reply is received from the server to BIG-IP, but this packet is dropped.

Conditions:
A BIG-IP system is between the DHCP client and DHCP server.

Impact:
DHCP OFFER is never passed on to the client, and as such, the client keeps sending DHCP DISCOVER packets, which are all dropped the same way.


1051125-1 : GTM marks virtual servers offline even when LTM virtual servers are available.

Links to More Info: BT1051125

Component: Global Traffic Manager (DNS)

Symptoms:
GTM virtual servers have a status of offline when they should be marked as available.

Conditions:
-- Sync group of two GTM devices with a large number of virtual servers (2k).
-- All the LTM virtual servers corresponding to GTM Virtual servers are available.
-- Add a third GTM into the sync group.

Impact:
LTM virtual servers are marked offline.


1050661-1 : Warning message with UDP on DOH server side.

Links to More Info: BT1050661

Component: Global Traffic Manager (DNS)

Symptoms:
DOH with server side flow using UDP results in a DoH server that is unable to deliver DNS replies larger than 4096 bytes to the DoH client (a truncated (TC) response will be sent instead).

Conditions:
1. A DNS profile that has all the internal DNS resolution features turned off (gslb, cache, dns-express, local-bind), so that DNS requests are load balanced to the pool
   tmsh create ltm profile dns dns-pool-only enable-dns-express no enable-dnssec no enable-gtm no process-rd no use-local-bind no

2. A pool pointing to a DNS server
   tmsh create ltm pool dns-pool-only members add {x.x.x.x:53}

3. An LTM virtual server that has TCP on the clientside (DoH server) and UDP on the server-side flow.
   tmsh create ltm virtual vs-doh-server destination x.x.x.x:443 ip-protocol tcp profiles add {doh-server tcp { context clientside } udp_gtm_dns { context serverside } http2 http clientssl-secure dns-pool-only }

Trigger by sending a DoH request to the virtual-server for a DNS resource record that is larger than 4096 bytes. A truncated response will be returned to the DoH client. Since the client is already using TCP (and HTTPS) to send the query, it can not retry the query using TCP like a traditional client could do.

Impact:
DNS responses with the TC (truncated) bit are received via the BIG-IP DoH virtual server.

Note that this is correct behavior, per RFC8484, for this configuration.

Workaround:
1. Use TCP on the server-side flow (this is the default if you don't specifically set the serverside to use UDP). The use of TCP will mean that each DNS request requires a TCP 3WHS and 4-way close.

(or)

2. Instead of configuring DNS servers as pool members, configure them as forward-zone nameservers for dns-cache, and enable dns cache in the DNS profile.

(or)

3. Ensure that the configuration is only used when you can be certain that no replies larger than 4096 bytes will ever be provided by the DNS server (pool member)


1050457-1 : The "Permitted Versions" field of "tmsh show sys license" only shows on first boot

Links to More Info: BT1050457

Component: TMOS

Symptoms:
As of BIG-IP Virtual Edition version 15.0.0, running "tmsh show sys license" should show the Permitted Versions. After the system is rebooted, this information is no longer displayed by TMSH.

Conditions:
-- Running the 'tmsh show sys license' command after a reboot

Impact:
Unable to see the permitted versions for the license.

Workaround:
The list of permitted versions can be seen in the /config/bigip.license file, by looking for Exclusive_version:

config # grep Exclusive_version /config/bigip.license
Exclusive_version : 11.6.*
Exclusive_version : 12.*.*
Exclusive_version : 13.*.*
Exclusive_version : 14.*.*
Exclusive_version : 15.*.*
Exclusive_version : 16.*.*
Exclusive_version : 5.*.*
Exclusive_version : 6.*.*
Exclusive_version : 7.*.*


1050413-4 : Drive model HGST HUS722T1TALA604 must be added to pendsect drives.xml.

Links to More Info: BT1050413

Component: TMOS

Symptoms:
When using the hard drive model HGST HUS722T1TALA604, pendsect does not recognize the hard drive and skips during sector checks.

Conditions:
- Using a HGST HUS722T1TALA604 hard drive on a BIG-IP system.
- Pendsect runs a sector check.

Impact:
Warning messages like the following will be logged to /var/log/messages:
-- warning pendsect[31898]: skipping drive -- Model: HDC WD1005FBYZ-01YCBB2
-- warning pendsect[31898]: No known drives detected for pending sector check. Exiting

Pendsect can't properly check the hard drive.

Workaround:
Give write permissions to modify file:
chmod u+w /etc/pendsect/drives.xml

Open the file and add the following at the end of the file, before default:
<snip>
         <HUS722T1TA>
            <offset firmware="RAGNWA09">0</offset>
            <offset firmware="default">0</offset>
            <family> "HA210"</family>
            <wd_name>"Ultrastar"</wd_name>
         </HUS722T1TA>
         <DEFAULT>
              <firmware version="default">
                     <offset>0</offset>
              </firmware>
              <name> "UNKNOWN"</name>
              <family> "UNKNOWN"</family>
              <wd_name>"UNKNOWN"</wd_name>
         </DEFAULT>
   </model>
  </drives>

Save and close the file.

Remove write permissions so that no one accidentally modifies this file:
chmod u-w /etc/pendsect/drives.xml



Run the following command and check /var/log/messages to verify no errors are seen:
/etc/cron.daily/pendsect


1050165 : APM - users end up with SSO disabled for their session, admin intervention required to clear session

Links to More Info: BT1050165

Component: Access Policy Manager

Symptoms:
If a user is trying to access a webtop resource that is configured behind APM single sign-on (SSO) which has failed for some reason, then the SSO process for that user is disabled for the rest of that session's life time.

Conditions:
-- Configure Kerberos SSO
-- Configure a network resource (a user's mail box configured on exchnage server, or an IIS based web service)

Impact:
BIG-IP Admin has to intervene to release the affected session manually.

Workaround:
None


1050153 : Unknown browscap value sent by the client.

Links to More Info: BT1050153

Component: Access Policy Manager

Symptoms:
APM logs 'Unknown browscap' messages:

Unknown browscap value 'x86_64' sent by the client.
Unknown browscap value 'MacOS' sent by the client.

Conditions:
-- An access policy implements different actions for different platforms
-- Certain APM clients connect

Impact:
'Unknown browscap' messages are logged and certain clients are not classified as expected.


1050089-5 : TMM crash in certain cases

Component: Application Security Manager

Symptoms:
TMM crash in certain cases

Conditions:
Bot defense profile is used in TMM

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1050009-2 : Access encountered error:ERR_NOT_FOUND. File: <file name> messages in 'acs_cmp_acp_req_handler' function in APM logs

Links to More Info: BT1050009

Component: Access Policy Manager

Symptoms:
In /var/log/apm

<Date> <time> <bigip> err tmm1[12598]: 01490514:3: (null):Common:00000000: Access encountered error: ERR_NOT_FOUND. File: <file name>, Function: acs_cmp_acp_req_handler, Line: 576

Conditions:
While evaluating Access Policy created by irule

ACCESS::session create -timeout <timeout> -lifetime <lifetime>
ACCESS::policy evaluate -sid <session ID> -profile <profile name>

Impact:
/var/log/apm gets filled with many 'Access encountered error:ERR_NOT_FOUND' error logs and there is no functional imapct.


1049237-1 : Restjavad may fail to cleanup ucs file handles even with ID767613 fix

Links to More Info: BT1049237

Component: Device Management

Symptoms:
Files that restjavad makes available for download (such as UCS files in /var/local/ucs) can be held open indefinitely if a requesting client (such as a BIG-IQ which is out of disk space) does not complete the download.
Since these files remain open, you may see low disk space even after deleting the associated files, and you may see items listed with '(deleted)' in lsof output.

Additionally, on a software version with ID767613 fix, you may see restjavad NullPointerException errors on /var/log/restjavad.*.log.

[SEVERE][1837][23 Sep 2021 10:18:16 UTC][RestServer] java.lang.NullPointerException
at com.f5.rest.workers.FileTransferWorker$3.run(FileTransferWorker.java:230)
at com.f5.rest.common.ScheduleTaskManager$1$1.run(ScheduleTaskManager.java:68)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:473)
at java.util.concurrent.FutureTask.run(FutureTask.java:262)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:178)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:292)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1152)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:622)
at java.lang.Thread.run(Thread.java:748)

Conditions:
-- Files restjavad makes available for download.
-- The requesting client does not complete the download.

Impact:
Low disk space, items listed with '(deleted)' when listed using lsof.

Workaround:
To free the file handles, restart restjavad:

# tmsh restart sys service restjavad

Files that were deleted now have their space reclaimed.


1049085-3 : Booting into a newly installed hotfix volume may stall on RAID-capable platforms

Links to More Info: BT1049085

Component: TMOS

Symptoms:
Upon booting into a RAID volume containing a newly installed instance of BIG-IP system software which is an Engineering Hotfix, the following messages may appear, after which the boot process stalls:

[...]
[ 11.705219] dracut-initqueue[324]: mdadm: Duplicate MD device names in conf file were found.
[ 133.844644] dracut-initqueue[324]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 133.932885] dracut-initqueue[324]: mdadm: Devices UUID-012345678:9abcdef0:12345678:9abcdef0 and UUID-abcdef01:23456789:abcdef01:23456789 have the same name: /dev/md4
[...]
[ *** ] A start job is running for dev-disk...

Conditions:
1) a hardware platform is configured to use RAID for redundancy
2) duplicate RAID array declarations are introduced into /etc/mdadm.conf
3) a hotfix installation is performed to one of the RAID volumes

Impact:
Impossible to boot into the volume of the new installation, it is necessary to physically reboot the device and revert to a previously working volume to rectify the problem.

Workaround:
Instead of installing the hotfix directly, first install the plain base version on which the hotfix is based and boot into it - this will resolve the problem with the duplicate entries in /etc/mdadm.conf.
Then install the hotfix as normal.


1048989-2 : Slight correction of button titles in the Data Guard Protection Enforcement

Component: Application Security Manager

Symptoms:
A button title read as "Ignored URLs / Enforced URLs" instead of "Ignore URLs / Enforce URLs".

Conditions:
1. On the Security > Application Security > Security Policies > Policies List > <selected_policy> screen, click the Data Guard tab.

2. Look on the Data Guard Protection Enforcement (Wildcards Supported) button fields. The button title should appear as Ignore/Enforce URLs.

Impact:
The title of the button is misleading.

Workaround:
None


1048949-1 : TMM xdata leak on websocket connection with asm policy without websocket profile

Links to More Info: BT1048949

Component: Application Security Manager

Symptoms:
Excessive memory consumption, tmm core.

Conditions:
- ASM provisioned
- ASM policy attached to a virtual server
- Websocket profile isn't attached to the virtual server
- Long lived websocket connection with messages

Impact:
Excessive memory consumption, tmm crash. Traffic disrupted while tmm restarts.

Workaround:
Attach the websocket profile to the virtual server


1048617-3 : Nice level BigDB paramter is not applied for BD

Component: Application Security Manager

Symptoms:
Nice level BigDB parameter is not applied for BD when BIG-IP is using split-planes

Conditions:
BIG-IP supports split-planes and nice level DB variable is set to non-zero.

Impact:
BD niceness level does not change.

Workaround:
None


1048425-4 : Packet tester crashes TMM when vlan external source-checking is enabled

Links to More Info: BT1048425

Component: Advanced Firewall Manager

Symptoms:
TMM SIGFPE Core Assertion "packet must already have an ethernet header".

Conditions:
Run the AFM Packet Tracer when external source-checking is enabled on the VLAN.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Disable source checking on the vlan.


1048077 : SELinux errors with gtmd when using internal FIPS card

Component: Global Traffic Manager (DNS)

Symptoms:
You can observe the following avc error logs when the gtmd process tries to interact with internal FIPS card for DNSSEC key and signature creation:


type=AVC msg=audit(1662044427.707:3960): avc: denied { create } for pid=39483 comm="gtmd" scontext=system_u:system_r:gtmd_t:s0 tcontext=system_u:system_r:gtmd_t:s0 tclass=netlink_route_socket
type=AVC msg=audit(1662044427.709:3961): avc: denied { search } for pid=39483 comm="gtmd" name="gtmd" dev="dm-20" ino=188725 scontext=system_u:system_r:gtmd_t:s0 tcontext=system_u:object_r:svc_svc_t:s0 tclass=dir
type=AVC msg=audit(1662044428.113:3962): avc: denied { create } for pid=39483 comm="gtmd" scontext=system_u:system_r:gtmd_t:s0 tcontext=system_u:system_r:gtmd_t:s0 tclass=netlink_route_socket
type=AVC msg=audit(1662044428.114:3963): avc: denied { search } for pid=39483 comm="gtmd" name="gtmd" dev="dm-20" ino=188725 scontext=system_u:system_r:gtmd_t:s0 tcontext=system_u:object_r:svc_svc_t:s0 tclass=dir

Conditions:
- Internal FIPS card present with FIPS 140-3 supported devices.
- DNSSEC Key and signature creation using internal keys.

Impact:
No Impact to DNSSEC deployment but gtmd throws SELinux errors.

Workaround:
None


1047933-1 : Virtual server security policy - An error has occurred while trying to process your request

Links to More Info: BT1047933

Component: Advanced Firewall Manager

Symptoms:
While loading the security tab page in the virtual server configuration page, you see an error: "An error has occurred while trying to process your request"

Conditions:
This is encountered when clicking the security tab in the virtual server configuration page, when there are a large number of virtual servers on the BIG-IP system (~2500).

Impact:
Delay in security tab page loading times and possible page timeout.

Workaround:
None


1046917-4 : In-TMM monitors do not work after TMM crashes

Links to More Info: BT1046917

Component: In-tmm monitors

Symptoms:
After TMM crashes and restarts, in-TMM monitors do not run. Monitored pool members are down.

Conditions:
-- In-TMM monitors are enabled.
-- TMM exits abnormally, as a result of one of the following:
  + TMM crashing and restarting
  + TMM being sent a termination signal (i.e. using 'pkill' to kill TMM)

Note: This issue does not occur if TMM is restarted using 'bigstart' or 'tmsh sys service'.

Impact:
Monitored pool members are offline.

Workaround:
One of the following:

1. Do not use in-TMM monitors.

2. After TMM restarts, manually restart bigd:
   tmsh restart sys service bigd

3. Add an entry to /config/user_alert.conf such as the following, so that the system restarts bigd when TMM starts up.

On an appliance or single-slot vCMP guest/tenant:

alert id1046917 "Tmm ready - links up." {
    exec command="bigstart restart bigd"
}

On a VIPRION or multi-slot vCMP guest/tenant:

alert id1046917 "Tmm ready - links up." {
    exec command="clsh --color=all bigstart restart bigd"
}

Note: This change must be made separately on each device in a ConfigSync device group.


1046633-1 : Rare tmm crash when sending packets to apmd fails

Links to More Info: BT1046633

Component: Access Policy Manager

Symptoms:
Tmm crashes while passing APM traffic

Conditions:
iRules involving ACCESS::session evaluate, or presence of access per-request policies that involves apmd like ldap/saml authentication.

Impact:
Traffic disrupted while tmm restarts.


1046469-1 : Memory leak during large attack

Links to More Info: BT1046469

Component: Anomaly Detection Services

Symptoms:
ADMD daemon memory consumption increases over several days until it causes OOM.

Conditions:
A large DoS attack occurs and is not mitigated.

Impact:
ADMD daemon will get killed and restarted. Due to the restart, the BADoS protection might be disabled for a couple of seconds.

Workaround:
To workaround the issue before installing the fix, ADMD could be monitored by a script and restarted as needed. This is similar to the current behavior, but it will avoid reaching OOM which might affect other daemons.


1046401-2 : APM logs shows truncated OCSP URL path while performing OCSP Authentication.

Links to More Info: BT1046401

Component: Access Policy Manager

Symptoms:
While performing OCSP authentication, the APM log file (/var/log/apm) shows the incomplete path of the OCSP URL.

Conditions:
-- Configure OCSP Server object
-- Configure OCSP Agent in the VPE
-- Perform OCSP Authentication

Impact:
Incomplete path of the OCSP URL causes ambiguity and gives the impression that APM is not parsing the URL correctly, while LTM parses correctly at the same time.

Workaround:
N/A


1046261-1 : Asynchronous REST task IDs do not persist across process restarts

Links to More Info: BT1046261

Component: TMOS

Symptoms:
If an asynchronous task is started via REST and the iControl REST process(es) restart, the task ID is lost and queries regarding its state will result in "Task not found" responses.

Conditions:
-- Starting an asynchronous process via REST.
-- The iControl REST process(es) restart.

Impact:
Unable to get the status of an asynchronous task. If you are using iControl REST to load a UCS, you will be unable to determine the status of the UCS load.


1045277-4 : The /var partition may become 100% full requiring manual intervention to clear space

Links to More Info: BT1045277

Component: TMOS

Symptoms:
The /var partition might become completely full on the disk due to files being written to /var/config/rest. This condition may be accompanied by console error messages similar to the following:
011d0004:3: Disk partition /var (slot #) has only 0% free on secondary blade.

Additionally, there may be periodic restjavad and bigd daemons restarts related to disk space exhaustion.

Conditions:
Process traffic while DoS Dashboard is open

Impact:
The partition housing /var/config/rest may become 100% full, impacting future disk IO to the partition.

Workaround:
Important: This workaround is temporary, and may need to be periodically performed either manually or from a script.

Impact of Workaround: While these steps are performed, the BIG-IP REST API will be temporarily inaccessible, and higher disk IO may be seen.

Run the following commands, in sequence:

bigstart stop restjavad
rm -rf /var/config/rest/storage*.zip
rm -rf /var/config/rest/*.tmp
bigstart start restjavad

Manual application of these workaround steps clears the 100% utilized space condition and allows the partition to resume normal operation.


1045065-3 : Enable traffic group modification in source-translation object

Links to More Info: BT1045065

Component: Advanced Firewall Manager

Symptoms:
You are unable to modify the traffic group in an address translation policy using tmsh.

Conditions:
This is encountered if you wish to use tmsh to change the traffic group.

Impact:
Traffic group can be modified in NAT source translation object using tmsh.

Workaround:
None


1044893 : Kernel warnings from NIC driver Realtek 8139

Links to More Info: BT1044893

Component: TMOS

Symptoms:
Excessive kernel logs occur from the NIC driver Realtek 8139

Conditions:
-- Realtek 8139 driver is used
-- Packets with partial checksum and protocol IPPROTO_TCP/IPPROTO_UDP arrives

Impact:
The Realtek 8139 driver logs excessive kernel warnings.


1044873-1 : Deleted GTM link is not removed from virtual server object and causes load failure.

Links to More Info: BT1044873

Component: Global Traffic Manager (DNS)

Symptoms:
The configuration fails to load with an error:

01070712:3: Values (/Common/Link_to_delete) specified for Virtual Server (/Common/vs1 /Common/HTTPP): foreign key index (explicit_link_FK) do not point at an item that exists in the database.
Unexpected Error: Loading configuration process failed.

Conditions:
-- Create GTM link
-- Assign specific link to any virtual server object
-- Delete link object
-- Run tmsh load sys config gtm-only (or create a sync group and the sync will fail)

Impact:
GTM config fails to load or config sync.

Workaround:
Remove any assigned virtual servers from the link prior to deleting it.


1044281-1 : In some cases, cpcfg does not trigger selinux relabel, leaving files unlabeled

Links to More Info: BT1044281

Component: TMOS

Symptoms:
Under certain circumstances, if a configuration is copied to a boot location that has has already been booted into, files restored by the UCS archive remain unlabeled. After booting to the target volume, the BIG-IP will not function and will have the status "INOPERATIVE".

Conditions:
-- APM is provisioned.
-- Performing a cpcfg copy to another volume.

Impact:
-- APM localdbmgr restarts, and fails to restore configuration from UCS archive
-- Spurious system permissions failures as a result of SELinux

Workaround:
After booting into the affected boot location, force an SELinux relabeling:

# touch /.autorelabel && reboot


1044089-3 : ICMP echo requests to virtual address gets a response even when the virtual server is offline when updated from GUI.

Links to More Info: BT1044089

Component: TMOS

Symptoms:
Virtual address is reachable even when the virtual server is offline.

Conditions:
The virtual server status is updated to offline by modifying the virtual server and adding an iRule via the GUI.

Impact:
ICMP echo requests are still handled by the virtual address even though the virtual server is marked offline.

Workaround:
Use tmsh to attach the iRule to the virtual server:

tmsh modify ltm virtual <virtual_server_name> rules {<rule_name> }


1044021-2 : Searching for IPv4 strings in statistics module does not work.

Links to More Info: BT1044021

Component: TMOS

Symptoms:
In Statistics :: Module statistics : Local Traffic : Pools, in "Display Options", if you choose "Statistics Type" as "Pools" and search for some IPv4 ip with partial words, the search will not return expected results.

Conditions:
Searching for an IPv4 address in the "Statistics" module.

Impact:
It is not possible to filter for IPv4 addresses.

Workaround:
None


1043985-1 : After editing an iRule, the execution order might change.

Links to More Info: BT1043985

Component: Local Traffic Manager

Symptoms:
After modification, the iRule execution order may change for events with the same priority.

Conditions:
Virtual server has an iRule that contains multiple events with the same priority.

Impact:
Unexpected behavior can cause virtual server malfunction.

Workaround:
Add desired priorities for iRules that contain the same event.
For example: when <event_name> priority nnn


1043141-1 : Misleading 'Symmetric Unit Key decrypt failure - decrypt failure' when loading UCS from another BIG-IP

Links to More Info: BT1043141

Component: TMOS

Symptoms:
Loading a UCS file from another BIG-IP results in an error message similar to:

"/usr/bin/tmsh -n -g -a load sys config partitions all platform-migrate" - failed. -- 010713d0:3: Symmetric Unit Key decrypt failure - decrypt failure

The error message is misleading as the issue is unrelated to master key decryption.

Conditions:
-- Loading a UCS archive from a different BIG-IP.
-- The UCS archive does not contain a ".unitkey" file.
-- The target system does have the correct master key value configured.
-- There is some other MCPD validation issue in the configuration.

Impact:
Platform migration fails with a misleading error message.

Workaround:
Once the issue has happened, you can either:

- Examine the LTM log file for other error messages from MCPD and then correct the configuration issue(s).

OR:

- Re-start MCPD.


1043009 : TMM dump capture for compression engine hang

Links to More Info: BT1043009

Component: Local Traffic Manager

Symptoms:
TMM crashes

Conditions:
The system detects a Nitrox hang and attempts to reset it.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Set Nitrox3.Compression.HangReset db variable to reset


1042993-3 : Provisioning high availability (HA) setup wizard fails to load, reports 'No Access'

Links to More Info: K19272127, BT1042993

Component: TMOS

Symptoms:
An authenticated administrative user is redirected to a 'NO ACCESS' error page while running the high availability (HA) setup wizard.

Conditions:
This may occur when running the high availability (HA) setup wizard in the TMOS GUI on a version of BIG-IP software (including Engineering Hotfixes) that includes fixes for ID1032405 :: https://cdn.f5.com/product/bugtracker/ID1032405.html and ID941649 :: https://cdn.f5.com/product/bugtracker/ID941649.html .

Impact:
You are unable to run/finish the Config Sync/HA setup wizard to completion.

Workaround:
Use the TMOS Shell (tmsh) command-line interface to perform the equivalent action.


1042589-1 : Wrong trunk_id is associated in bcm56xxd.

Links to More Info: BT1042589

Component: TMOS

Symptoms:
When a set of interfaces are moved from one trunk to another, the now empty trunk is left with a valid association in bcm56xxd, and deleting that trunk can cause a valid trunk to be removed in the BCM hardware.

'tmsh show net trunk MY_TRUNK' shows the trunk is UP, but in fact the trunk is unconfigured in hardware.

Conditions:
Moving the interfaces across trunks.
i.e.
tmsh modify net trunk MY_OLD_TRUNK interfaces none
tmsh modify net trunk MY_NEW_TRUNK interfaces add { 1.1 1.2 }
tmsh delete net trunk MY_OLD_TRUNK

Impact:
May cause an L2 traffic loop.


1042505-1 : Session variable "session.user.agent" does not get populated for edge clients

Links to More Info: BT1042505

Component: Access Policy Manager

Symptoms:
Access policy agents and iRules that depend on "session.user.agent" session variable fail to execute properly.

Conditions:
Access polices have agents that depend on the value of session variable "session.user.agent" for its execution.

Impact:
Any access policy agents that depend on this session variable will not be able to follow the rules.

Workaround:
An iRule can be used to generate a session variable. For example:

# This event fires once per session
when ACCESS_SESSION_STARTED {
  log local0. "Setting User-Agent based on HTTP data - [HTTP::header User-Agent]"
  ACCESS::session data set session.custom.client.useragent [HTTP::header User-Agent]
  #Use this variable in the VPE to make some decision
}


1041989-4 : APM Portal Access does not add automatically the / after the URL encoded (after the '$$'), Redirect breaks

Links to More Info: BT1041989

Component: Access Policy Manager

Symptoms:
If the Location header does not end with '/' in direct case, the rewritten URL misses the forward slash character '/'.

APM does not add automatically the / after the URL encoded(after $$)?

e.g https://website Is rewritten as https://apm/f5-w-<hex encoded scheme,host,port>$$ instead of https://apm/f5-w-<hex encoded scheme,host,port>$$/.

If the caption URI is https://website without / at the end, APM will rewrite it as https://apm/f5-w-<hex encoded scheme,host,port>$$/

Conditions:
-- APM Portal Access
-- Redirect response Location header does not end with '/' - after the {scheme://host:port}

Impact:
Missing / after redirection - Page does not load

Workaround:
Add '/' through iRule in redirect response header.


1041985-1 : TMM memory utilization increases after upgrade

Links to More Info: BT1041985

Component: Access Policy Manager

Symptoms:
TMM memory utilization increases after upgrading.

The keep-alive interval of the _tmm_apm_portal_tcp default profile is set to a value that is less than the Idle Timeout setting.

Conditions:
-- APM enabled and passing traffic
-- The configuration has a profile that uses or is derived from _tmm_apm_portal_tcp where the keep-alive interval was reduced to 60

Note that this can be encountered any time a tcp profile contains a keep-alive interval setting that is less than the idle timeout.

For more information about the relationship between keep-alive and idle time out, see K13004262: Understanding Idle Timeout and Keep Alive Interval settings in the TCP profile, available at https://support.f5.com/csp/article/K13004262

Impact:
TMM memory may increase while passing traffic.

Workaround:
Change the tcp keep alive interval to the default setting of 1800 seconds.


1041889-2 : RRSIG missing for CNAME with RDATA in different zone

Links to More Info: BT1041889

Component: Global Traffic Manager (DNS)

Symptoms:
RRSIG missing for CNAME.

Conditions:
-- CNAME record with RDATA in different zone.
-- One zone dynamically signed.
-- The other zone in local BIND (ZoneRunner) with static DNSSEC records.

Impact:
DNSSEC validation failure.


1041657-1 : PEM and Analytics tabs are displayed when accessing DoH Proxy/Server profiles.

Links to More Info: BT1041657

Component: Global Traffic Manager (DNS)

Symptoms:
The BIG-IP GUI displays the PEM and Analytics tabs for DNS over HTTPS (DoH) Proxy/Server profiles. These tabs should not be present.

Conditions:
This occurs when viewing the DoH proxy or server profile. A PEM and analytics tab is visible when it should not be.

Impact:
Wrong display of PEM and Analytics profile tabs in the GUI.

Workaround:
None.


1041625-5 : Virtual server flapping when the active and standby devices have different configuration.

Links to More Info: BT1041625

Component: Global Traffic Manager (DNS)

Symptoms:
The virtual server status flaps.

Conditions:
1. Virtual server auto discovery enabled.
2. Configured GTM server is configured for high availability (HA).
3. The active and standby devices have different IP addresses for the same virtual server.

Impact:
The virtual server status flaps and traffic might be interrupted.

Workaround:
Make the active and standby devices have the same configuration.


1041317-1 : MCPD delay in processing a query_all message if the update_status bit is set

Links to More Info: BT1041317

Component: TMOS

Symptoms:
When there are a significant number of virtual servers or pools, mcpd can take a several seconds to respond to query_all messages, if the update_status is set to 1 in the message.

Conditions:
Update_status is set to 1 in the message. This could occur, for example, with the following snmp command

snmpget -v2c -c public localhost ltmVsStatusNumber.0

Impact:
While mcpd is busy updating the status for each virtual server or pool, mcpd will not able to to respond to any messages. Control plane operations might timeout.


1041113 : BIG-IP Admin role credentials are not usable for getting device discovered by BIG-IQ

Links to More Info: BT1041113

Component: Device Management

Symptoms:
BIG-IQ is unable to discover BIG-IP with admin role user (not default admin user).

Conditions:
The admin of BIG-IQ is attempting to add a BIG-IP using its an account with admin role (that is not the default admin account).

Impact:
BIG-IQ fails to discover BIG-IP.

Workaround:
Restart the restjavad process on BIG-IP and reattempt device discovery from BIG-IQ.


1040957-1 : The ipother profile can be used with incompatible profiles in a virtual server

Links to More Info: BT1040957

Component: Local Traffic Manager

Symptoms:
The BIG-IP system does not prevent the ipother profile from being used with incompatible profiles in a virtual server.

-- Log messages such as the following in the LTM log file:

err tmm[28670]: 01010008:3: Proxy initialization failed for /Common/example_vs. Defaulting to DENY.
err tmm[28670]: 01010008:3: Listener config update failed for /Common/example_vs: ERR:ERR_ARG

-- Log messages such as the following in TMM's log file:

notice hudchain contains precluded clientside filter: IPOTHER

Conditions:
Creating or modifying a virtual server to use the ipother profile with an incompatible profile.

Impact:
Invalid configuration. TMM traffic passing does not behave the way virtual server configuration dictates it should.

Workaround:
Remove the incompatible profile(s) from the virtual server.


1040829-4 : Errno=(Invalid cross-device link) after SCF merge

Links to More Info: BT1040829

Component: Access Policy Manager

Symptoms:
A single config file (SCF) merge fails with the following error:

01070712:3: failed in syscall link(/var/system/tmp/tmsh/IHxlie/files_d/Common_d/customization_group_d/:Common:otters-connectivity_1_secure_access_client_customization_62552_1, /config/filestore/.trash_bin_d/.current_d/Common_d/customization_group_d/:Common:otters-connectivity_1_secure_access_client_customization_62552_1) errno=(Invalid cross-device link)

Conditions:
A customization group with the same name is present in both the SCF file and the BIG-IP device.

Impact:
SCF merge fails

Workaround:
None


1040685-4 : Core file on blade slot2 after reboot (TMM SIGSEGV in pktclass_classifier)

Links to More Info: BT1040685

Component: Advanced Firewall Manager

Symptoms:
Tmm crashes after reboot.

Conditions:
This is encountered intermittently after rebooting a blade.

Impact:
Slot usable until manual intervention. Traffic disrupted while tmm restarts.

Note: this issue happened only once and no further occurrence was reported.


1040573-4 : REST operation takes a long time when two different users perform tasks in parallel

Links to More Info: BT1040573

Component: TMOS

Symptoms:
It takes excessive time to execute multiple REST(icr) requests in parallel by different users.

Conditions:
Multiple iControl REST operations are performed by different users in parallel.

Impact:
BIG-IP system performance is impacted.

Workaround:
Use only one user to process the multiple requests.
OR
Use an iControl REST transaction containing multiple requests.


1040465-3 : Incorrect SNAT pool is selected

Links to More Info: BT1040465

Component: Local Traffic Manager

Symptoms:
An incorrect SNAT pool is selected when an SSL Forward Proxy is configured and BYPASS is enabled along with an iRule to choose the SNAT pool.

Conditions:
-- Virtual Server has SSL Forward Proxy Deployment with BYPASS enabled
-- iRule configured to decide the SNAT pool members
-- Virtual Server passes the traffic

Impact:
Traffic diverted to incorrect SNAT pool when BYPASS happens.


1040277-4 : Syslog-ng issue may cause logging to stop and possible reboot of a system

Links to More Info: BT1040277

Component: TMOS

Symptoms:
A syslog-ng issue with remote logging to an invalid remote syslog server may lead to logging via syslog-ng to stop.

For software version 13.1 only it may lead to BIG-IP unexpectedly rebooting due to host watchdog timeout, typically within hours to day or two after syslog-ng gets hung up.


The cessation of logging happens at the time of the last 'Syslog connection broken' in /var/log/messages before reboot.
That message will appear without a preceding 'Syslog connection established' just before it with same timestamp.

At this time syslog-ng typically spins, using near 100% CPU.

Conditions:
Invalid syslog-ng server configuration or broken connection from BIG-IP toward configured syslog-ng remote server.

A server is configured as a remote syslog destination on the BIG-IP, but it or an intervening system responds to stream of log messages by breaking connection eg by sending ICMP port unreachable to BIG-IP.

Syslog-ng will note the connection attempt and that it has broken usually in the same second, and do so every 60s when it retries.
There may be many of these log pairs, repeating every minute in /var/log/messages, such as:

  Nov 25 03:14:01 localhost.localdomain notice syslog-ng[12452]: Syslog connection established; fd='14', server='AF_INET(192.168.1.1:514)', local='AF_INET(0.0.0.0:0)'
  Nov 25 03:14:01 localhost.localdomain notice syslog-ng[12452]: Syslog connection broken; fd='14', server='AF_INET(192.168.1.1:514)', time_reopen='60'

The final log will of a broken connection only, usually one minute after the last established/broken pair in the very rare event that syslog-ng hangs.

  Nov 25 03:15:01 localhost.localdomain notice syslog-ng[12452]: Syslog connection broken; fd='14', server='AF_INET(192.168.1.1:514)', time_reopen='60'

Impact:
Very rarely syslog-ng hangs in a non-functional state. Sometimes, this may lead to an unexpected reboot of BIG-IP. Loss of logs before restart and traffic disrupted while BIG-IP restarts.

Workaround:
Ensure syslog-ng server configuration is valid, and that the server is reachable. If a remote server is not reachable remove it from the BIG-IP syslog configuration.


1040153-1 : Topology region returns narrowest scope netmask without matching

Links to More Info: BT1040153

Component: Global Traffic Manager (DNS)

Symptoms:
BIG-IP returns malformed packets or the narrowest scope not matching the request.

Conditions:
Mixed sub networks with different mask length.

Impact:
Malformed packets.

Workaround:
Do not put mixed subnets in one region.


1040117-2 : BIG-IP Virtual Edition drops UDP packets

Links to More Info: BT1040117

Component: TMOS

Symptoms:
BIG-IP Virtual Edition drops padded UDP packets when the hardware will accept and forward these same packets.

Conditions:
-- BIG-IP Virtual Edition
-- Padded UDP packets are sent

Impact:
UDP packets are dropped, potentially disrupted traffic


1040045-3 : Unable to delete trunk member on a VCMP guest

Links to More Info: BT1040045

Component: Local Traffic Manager

Symptoms:
After deleting a trunk member on a VCMP hypervisor, the change may not propagate to the guest.

Conditions:
-- VCMP guest
-- A trunk member that is UP
-- The trunk member is deleted on the hypervisor

Impact:
The guest does not have the current trunk information

Workaround:
Down the interface on the VCMP hypervisor before removing it (tmos)# modify net interface 2/3.1 disabled
(tmos)# modify net trunk trunk_1 interfaces del { 2/3.1 }


1040017-5 : Final ACK validation during flow accept might fail with hardware SYN Cookie

Links to More Info: BT1040017

Component: Local Traffic Manager

Symptoms:
With hardware SYN cookie mode enabled, final ACK validation during flow accept fails and ACK packets are dropped. Such error messages are being logged in LTM logs :

"An Enforced Device DOS attack start was detected for vector TCP half-open"

Conditions:
-- Hardware SYN Cookie is enabled
-- BIG-IP is under TCP half-open attack and packet hits a CMP forwarding flow

Impact:
ACK packets are wrongly dropped, causing traffic interruption.

Workaround:
Disable hardware SYN Cookie


1039941-3 : [WIN]Webtop offers to download f5vpn when it is already installed

Links to More Info: BT1039941

Component: Access Policy Manager

Symptoms:
A pop-up window shows up and requests to download the client component.

Conditions:
Either of these conditions can trigger it:

#1
-- Network Access configured and webtop type to "Network Access"
-- VPE configured
[Machine Info (or Anti Virus Check)] -- [Resource Assignment (NA + Webtop)]

#2
-- Network Access (auto launch) and webtop configured
-- VPE configured
[Machine Info (or Anti Virus Check)] -- [Resource Assignment (NA + Webtop)]

Impact:
End users are unable to use the browser-based VPN.

Workaround:
Any of these workarounds will work:

-- Use Internet Explorer
-- Do not configure Network Access auto launch or "Network Access" for the webtop type
-- Insert the message box between Client Inspection (Machine info, etc.) and "Resource Assignment" on the VPE
-- Ignore the message (click "Click here"), and it allows you to move on to the next step


1039609-1 : Unable to poll Dynamic routing protocols SNMP OID's on non-default route domain

Links to More Info: BT1039609

Component: TMOS

Symptoms:
You are unable to extract the dynamic routing protocols configuration information via an SNMP walk.

Conditions:
Example taken below is for BGP:

-- Create BGP config in non-default route-domain, establish peer with some router.
-- Create snmp community in non-default route domain
-- Run snmp walk for BGP4 mib (1.3.6.1.2.1.15).

Certain key MIB OIDs from the BGP configuration like bgpPeerRemoteAddr,bgp4PathAttrIpAddrPrefixLen are missing.

Impact:
Dynamic routing protocols SNMP OID polling not working when they are in a non-default route-domain.


1039361-1 : [GraphQL] In case of more than one malformed violation, the first is reported multiple times

Links to More Info: BT1039361

Component: Application Security Manager

Symptoms:
In a scenario where the incoming GraphQL request has more than one malformed violation, the details of the reported malformed violations will include the first reported string only.

Conditions:
GraphQL request has more than one malformed violation.

Impact:
Missing information from Request Log.


1039349-1 : HTTP statistics not updated

Links to More Info: BT1039349

Component: Local Traffic Manager

Symptoms:
HTTP redirect stats are not incremented when a redirect occurs.

Conditions:
The virtual server to which the client will be connecting is configured with "fallback" setting on http profile and pool member is intentionally disabled to get the traffic redirect to another virtual.

Impact:
HTTP statistics are not updated


1039277-4 : TMM core

Links to More Info: BT1039277

Component: Local Traffic Manager

Symptoms:
Tmm crashes while passing traffic

Conditions:
- http virtual server
- httprouter
- http2 profile

Impact:
Traffic disrupted while tmm restarts.


1039145-1 : Tenant mirroring channel disconnects with peer and never reconnects after failover.

Links to More Info: BT1039145

Component: Local Traffic Manager

Symptoms:
`tmctl -d blade ha_stat` shows missing mirroring connections.

Conditions:
This occurs with high availability (HA) pair. This is a VELOS hardware-specific issue.

Impact:
High availability (HA) mirroring does not function correctly.

Workaround:
N/A


1038057-4 : Unable to add a serverssl profile into a virtual server containing a FIX profile

Links to More Info: BT1038057

Component: Service Provider

Symptoms:
You are unable to configure a virtual server to use server SSL encryption with FIX protocol messages.

Conditions:
This is encountered when serverssl needs to be configured for FIX profiles

Impact:
You are unable to assign a server-ssl profile to the virtual server.

Workaround:
None


1037877-3 : OAuth Claim display order incorrect in VPE

Links to More Info: BT1037877

Component: Access Policy Manager

Symptoms:
In the visual policy editor (VPE), it is difficult to re-order custom previously created Claims in the oAuth Authorization agent.

The following error is thrown in the developer tools screen of the client browser:
common.js?m=st&ver=15.1.2.1-0.0.10.0:902 Uncaught TypeError: Cannot read property 'row' of undefined
    at Object.common_class.swap (common.js?m=st&ver=15.1.2.1-0.0.10.0:902)
    at multipleObjectsSelectionCBDialogue_class.swapEntries (multipleObjectsSelectionCBDialogue.js?m=st&ver=15.1.2.1-0.0.10.0:263)
    at HTMLAnchorElement.<anonymous> (multipleObjectsSelectionCBDialogue.js?m=st&ver=15.1.2.1-0.0.10.0:185)
common_class.swap @ common.js?m=st&ver=15.1.2.1-0.0.10.0:902
multipleObjectsSelectionCBDialogue_class.swapEntries @ multipleObjectsSelectionCBDialogue.js?m=st&ver=15.1.2.1-0.0.10.0:263
(anonymous) @ multipleObjectsSelectionCBDialogue.js?m=st&ver=15.1.2.1-0.0.10.0:185

Conditions:
-- There are at least two claims in Access :: Federation : OAuth Authorization Server : Claim
-- You are attempting to reorder the claims in the visual policy editor

Impact:
It is not possible to re-order the claims

Workaround:
None


1037645-4 : TMM may crash under memory pressure when using iRule 'AES::key' command

Links to More Info: BT1037645

Component: Local Traffic Manager

Symptoms:
TMM crashes and generates core file.

Conditions:
-- TMM is under memory pressure
-- iRule using 'AES::key' command

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1037617-1 : Switching between bare-metal and vCMP modes can leave HSM with poorly deployed accelerator engine counts

Links to More Info: BT1037617

Component: Performance

Symptoms:
FIPS performance does not reach 10k TPS.

Conditions:
-- i15820 platform with FIPS configured

Impact:
Lower than expected performance, but the system otherwise functions normally.

Workaround:
While vCMP is provisioned, resize the PARTITION_1 partition using:

    # fipsutil ptnresize

And when prompted as in the following:

    "Enter max accel devs (1-63)"

Enter 63.


1037153-1 : iRule "log" command to remote destinations may cause TMM to leak memory

Links to More Info: BT1037153

Component: Local Traffic Manager

Symptoms:
TMM leaks memory in the errdefs component.

TMM may leak memory in the xdata and xhead components if the system does not have routes to the specified syslog servers.

Conditions:
-- iRule that uses "log" to target a remote destination, e.g.: "log 192.0.2.1 'log message'"

Impact:
TMM leaks memory.

Eventually, TMM may disrupt legitimate connections as a result of memory pressure, or even crash and restart.

Workaround:
One of the following:

1. Log to local syslog, and configure syslog-ng to log to remote servers.

2. Use High-Speed Logging (https://clouddocs.f5.com/api/irules/HSL.html), instead of the "log" command.


1036969-1 : Chrome sometimes ignores cross-site bot-defense cookies

Links to More Info: BT1036969

Component: Application Security Manager

Symptoms:
Chrome ignores cross-site bot-defense cookies when bot-defense is sending 307 redirect.

Conditions:
A site is using another site/domain resources that are also protected by bot-defense

Impact:
The other site/domain resource will not display correctly on Chrome

Workaround:
iRule work-around based on:https://devcentral.f5.com/s/articles/iRule-to-set-SameSite-for-compatible-clients-and-remove-it-for-incompatible-clients-LTM-ASM-APM.

Or, disabling simple redicret via TMSH:
tmsh modify sys db dosl7.proactive_defense_simple_redirect { value "disable" }
tmsh modify sys db dosl7.proactive_defense_simple_redirect_on_grace { value "disable" }


1036873-2 : Pre-shared key extension sometimes is not the last extension in ClientHello in TLS1.3

Links to More Info: BT1036873

Component: Local Traffic Manager

Symptoms:
Under some conditions, the BIG-IP's TLS 1.3 Client Hello sometimes does not have the pre-shared key extension as the last extension in the Client Hello. This is contrary to a requirement in the TLS 1.3 RFC, and causes servers to fail the connection.

A backend server may log a message such as:

SSL_do_handshake() failed (SSL: error:141B306E:SSL routines:tls_collect_extensions:bad extension)

Conditions:
-- Server SSL profile (BIG-IP operating as client) with TLS 1.3 enabled.
-- A Client Hello message size that falls between 256 and 512 bytes (without padding), which causes the BIG-IP to introduce a padding extension at the end of the Client Hello.

This issue can be seen via use of the "single-dh-use" or "session-tickets" options in the SSL profile.

Impact:
The TLS handshake fails.

Workaround:
Adjust the configuration of the Server SSL profile by either:

-- Disable Session Tickets
or
-- Disable the single-dh-use option


1036613-3 : Client flow might not get offloaded to PVA in embryonic state

Links to More Info: BT1036613

Component: TMOS

Symptoms:
The client flow is not offloaded in embryonic state, but only is only offloaded once the flow transitions to an established state.

Conditions:
-- FastL4 profile configured to offload TCP connections in embryonic state (this is the default)
-- Clientside and serverside ingress traffic is handled by different TMMs
-- Running on a platform with multiple HSB modules per TMM, i.e.:
--+ BIG-IP i11600 Series
--+ BIG-IP i15600 Series

Impact:
- minor performance degradation;
- PVA traffic counters show unexpectedly high values;


1036557-1 : Monitor information not seen in GUI

Links to More Info: BT1036557

Component: TMOS

Symptoms:
GUI displays "An error has occurred while trying to process your request" when deleting/creating a monitor with the same name under the same transaction.

Conditions:
(a) Create a TCP monitor, then in a single transaction delete the TCP monitor + create an HTTP monitor with same name as the TCP monitor. Example below:

# tmsh create ltm monitor tcp <Name of the monitor>
# echo 'create cli transaction; delete ltm monitor tcp <Name of the monitor> ; create ltm monitor http <Name of the monitor>; submit cli transaction' | tmsh
# tmsh save sys config

This could also occur when reconfiguring an iApp, or changing a configuration via AS3.


(b) Login to the GUI and click on the monitor (GUI > Local Traffic > Monitors > (Monitor created)) you'll see "An error has occurred while trying to process your request"

Impact:
Unable to view monitor parameters in GUI.

Workaround:
Any one of the following workarounds help:
- do not use the same monitor name
- do not perform the delete+create actions on a single transaction
- save and load the configuration:
  tmsh save sys config && tmsh load sys config


1036541-4 : Inherited-traffic-group setting of floating IP does not sync on incremental sync

Links to More Info: BT1036541

Component: TMOS

Symptoms:
When a floating IP object is created, and its inherited-traffic-group property is set, this property does not sync to other devices.

Conditions:
This is relevant for any setup with multiple devices in a sync/failover device group.

Impact:
This will impact incremental syncing to other peers in the device group.

Workaround:
Do a full config sync if possible.


1036461-4 : icrd_child may core with high numbers of open file descriptors.

Links to More Info: BT1036461

Component: TMOS

Symptoms:
icrd_child core generated.

Conditions:
Have over 1024 open file descriptors.

Impact:
REST API usage for BIG-IP configuration will be impacted.

Workaround:
N/A


1036265-4 : Overlapping summary routes might not be advertised after ospf process restart.

Links to More Info: BT1036265

Component: TMOS

Symptoms:
Overlapping summary routes might not be advertised after ospf process restarts.

Conditions:
Add an overlapping /32 entry for a summary route and restart ospf process.

Impact:
Summary routes are not advertised.


1036097-4 : VLAN failsafe does not trigger on guest

Links to More Info: BT1036097

Component: TMOS

Symptoms:
VCMP guest VLAN failsafe does not trigger as expected.

Conditions:
-- VCMP host configured
-- VLAN failsafe enabled on a VLAN
-- One or more VCMP guests enabled that use that VLAN.
-- A trunk member of a trunk connected to the vCMP guest is flapping.

Impact:
Since the neighbor messages for the IPv6 link-local addresses continue to be successfully passed from host to guest upon a trunk member change, VLAN failsafe does not trigger even if the upstream switch goes down that's connected to the VLAN.

Workaround:
None


1036093-4 : Tmm sends out neighbor advertisements for the link local addresses even if IPv6 is disabled

Links to More Info: BT1036093

Component: Local Traffic Manager

Symptoms:
When a trunk member state changes and IPv6 is disabled, BIG-IP still sends neighbor advertisements for the link-local addresses on each VLAN

Conditions:
- IPv6 is disabled (ipv6.enabled=false)
- change in a trunk member state occurs

Impact:
Link-local addresses are still in the vaddr hash even after ipv6 is disabled.


1036013-3 : BIG-IP systems may terminate connections prematurely when a TLS close-notify alert is received

Links to More Info: BT1036013

Component: Local Traffic Manager

Symptoms:
When a backend server sends a TLS close-notify alert, BIG-IP may terminate the connection prematurely without forwarding the HTTP response.

Conditions:
ServerSSL receives a TLS Close-notify alert after a TLSv1.3 session is established.

Impact:
Server responses may be dropped.

Workaround:
Use TLSv1.2.


1035757-4 : iRulesLX restart leaves stale files in /var/tmstat/blade/tmplugin_ilx_*

Links to More Info: BT1035757

Component: Local Traffic Manager

Symptoms:
After restarting the ilx plugin, new tmplugin_ilx_rpc_* stat files are being created, but old files are not being deleted.

Conditions:
- ilx configured
- ilx plugin restarted

Impact:
The presence of too many of these leftover files might prevent merged from rolling up stats and providing graphs and cause such errors:

err merged[8523]: 011b0900:3: TMSTAT error tmstat_remerge: Cannot allocate memory.

Workaround:
Delete stale tmplugin_ilx_* files manually


1035741-1 : Wrong default value for lacp-port-priority.

Links to More Info: BT1035741

Component: Local Traffic Manager

Symptoms:
Wrong default value set for lacp-port-priority and also in description of tmsh help interface

Conditions:
Run the following commands to see wrong default value for lacp-port-priority:

--tmsh help interface

-- tmsh list net interface <interface number> lacp-port-priority

Impact:
Confusion with wrong default value seen.

Workaround:
N/A


1035661-4 : REST Requests return 401 Unauthorized when using Basic Auth

Links to More Info: BT1035661

Component: TMOS

Symptoms:
REST Requests are intermittently failing with a 401 error.

The restjavad-audit.*.log shows these requests are closely preceded by a 503 response from /mgmt/tm/auth/source.

Conditions:
Triggered when a REST request comes in using Basic Auth while an asynchronous task is executing on the BIG-IP.

An example of an asynchronous task is the BIG-IP processing an AS3 declaration.

Impact:
REST requests will fail with a misleading response code and for no readily apparent reason.

Workaround:
Use token based authentication for REST requests.


1035121-4 : Configsync syncs the node's monitor status

Links to More Info: BT1035121

Component: TMOS

Symptoms:
After config sync, nodes may be marked marked down when they are up, even if the monitor determines that the node is up.

The logs will show something similar to :

notice mcpd[8091]: 010714a0:5: Sync of device group /Common/device_trust_group to commit id 1 6986973310536375596 /Common/xxxxxxxx 1 from device /Common/yyyyyyyy

notice mcpd[8091]: 01070640:5: Node /Common/node1 address 10.10.100.1 monitor status down. [ /Common/icmp: up ] [ was up for 0hr:3mins:15sec ]
notice mcpd[8091]: 01070640:5: Node /Common/node2 address 10.10.100.2 monitor status down. [ /Common/icmp: up ] [ was up for 0hr:3mins:15sec ]

The node/pool member/pool/virtual server will be marked down.
Checking the actual monitor it will be up, tcpdump will show successful monitor transactions.

Conditions:
1. Two or more devices in a sync/failover device group
2. The config sync from-device has marked nodes down
3. A config sync occurs

This can occur on both incremental and full config sync.

Impact:
The node's monitor status is synced to the peer device. If the from-device's monitor was unable to reach the nodes and was marking the nodes as DOWN, then the node status will be set to DOWN on the other device, even if the monitor is successfully connecting to the node. This can cause a traffic disruption.

Note: the opposite can occur, where a "node up" status is sent to a device whose monitor is failing to connect to the nodes due to a network issue.

Workaround:
If a device is in this state, you can work around this issue by doing one of the following:

-- Save and reload the configuration on the device with the bad state
   tmsh save sys config && tmsh load sys config

-- Perform a full-load sync from the peer device to the affected device:
   (On the peer) tmsh run cm config-sync force-full-load-push to-group group-name


1035017-6 : Remove unused CA-bundles

Component: TMOS

Symptoms:
Some of the certificate bundles shipped on BIG-IP devices are not used and aren't updated. In particular, there are legacy bundles which aren't needed.

Conditions:
This affects certain internal certificate bundles on the BIG-IP file system:

Impact:
There is a chance that there might be failures when "internal certificates" expires.

Workaround:
None


1034953-3 : In explicit proxy, HTTP_STATCODE missing from syslog

Links to More Info: BT1034953

Component: Local Traffic Manager

Symptoms:
HTTP_STATCODE missing from logs captured using request logging profile when HTTP request is made to explicit proxy virtual server.

Conditions:
- Configure explicit proxy virtual server
- Apply request logging on the same virtual server
- Send HTTP request to connect to a Host via the explicit virtual server

Impact:
HTTP_STATCODE not found in the logs captured from request logging


1034865-1 : CACHE::enable failed on private/no-store content

Links to More Info: BT1034865

Component: Local Traffic Manager

Symptoms:
BIG-IP provides a possibility to cache HTTP responses with RAMCACHE feature. When a response has either "Cache-Control: private" or "Cache-Control: no-store", the CACHE::enable setting allows the content to be cached. This option was removed when a fix to ID 360047 was introduced.

Conditions:
-- A virtual server has a web-acceleration profile without a policy.
-- An iRule has CACHE::enable command, overwriting Cache-Control header's values "no-store" and/or "private".

Impact:
BIG-IP always requests for a response from the origin web server even when a response is cacheable, putting extra load on the origin web server.


1034509-6 : Sensor read errors on VIPRION C2200 chassis

Links to More Info: BT1034509

Component: TMOS

Symptoms:
Due to LOP sensor read errors, the command 'tmsh show sys hardware' can list an RPM of 0 for some chassis fans.

Conditions:
- Running a C2200 VIPRION chassis
- Other conditions unknown

Impact:
Messages such as the following appear in /var/log/ltm:

warning chmand[7629]: 012a0004:4: hal_if_media_poll: media SVC exception: media: getLopReg error
err chmand[7629]: 012a0003:3: getSensorData: sensor read fault for Chassis fan 1, LOP return code -1 : File sensor/LopSensSvc.cpp Line 2315
err chmand[7629]: 012a0003:3: getSensorData: sensor read fault for Chassis fan 2, LOP return code -1 : File sensor/LopSensSvc.cpp Line 2315
err chmand[7629]: 012a0003:3: getSensorData: sensor read fault for Chassis fan 3, LOP return code -1 : File sensor/LopSensSvc.cpp Line 2315
err chmand[7629]: 012a0003:3: getSensorData: sensor read fault for Chassis fan 4, LOP return code -1 : File sensor/LopSensSvc.cpp Line 2315
warning chmand[7629]: 012a0004:4: getLopReg Sock error: send to lopd failed [lopd addr:/var/run/lopdsvr] [client addr:/var/run/hwctl.hal.sock] (errno:2) No such file or directory
warning chmand[7629]: 012a0004:4: GET_STAT failure (status=0xc) page=0x21 reg=0x50
err chmand[7629]: 012a0003:3: getSensorData: sensor read fault for Chassis 3.3V main voltage, LOP return code -1 : File sensor/LopSensSvc.cpp Line 2315
notice chmand[7629]: 012a0005:5: Tmstat::updateSensorTbls: HAL SenSvc error: send to lopd failed [lopd addr:/var/run/lopdsvr] [client addr:/var/run/hwctl.hal.sock] (errno:2) No such file or directory
warning chmand[7629]: 012a0004:4: getChassisPwrSup err: send to lopd failed [lopd addr:/var/run/lopdsvr] [client addr:/var/run/hwctl.hal.sock] (errno:2) No such file or directory
warning chmand[7629]: 012a0004:4: getChassisPwrSup err: send to lopd failed [lopd addr:/var/run/lopdsvr] [client addr:/var/run/hwctl.hal.sock] (errno:2) No such file or directory

Tmsh show sys hardware will list an RPM of 0 for chassis fans affected by the sensor read errors

Workaround:
No workaround currently known.


1034217-2 : Quic_update_rtt can leave ack_delay uninitialized.

Links to More Info: BT1034217

Component: Local Traffic Manager

Symptoms:
Retransmission times become very long if there is packet loss near the beginning of the connection.

Conditions:
-- Basic QUIC configuration.
-- The first couple of packets in the connection reaches an uninitialized variable path before the connection reaches the ESTABLISHED state.

Impact:
Uninitialized ack_delay variable could be any value and cause RTT measurements to be unusually large. That could cause retransmission times to be very long if there is packet loss near the beginning of the connection.

Workaround:
N/A


1034009-4 : CGNAT+Subscriber Discovery - NAT IP with wrong route domain on the CGNAT Log

Links to More Info: BT1034009

Component: Carrier-Grade NAT

Symptoms:
The route domain ID for the translated IP is incorrect in the log message.

Conditions:
This issue will be seen when the different route domain are configured for incoming and outgoing traffic.

Impact:
Log messages will have an incorrect domain-id.

Workaround:
None


1033969-4 : MPLS label stripping needs next protocol indicator

Links to More Info: BT1033969

Component: TMOS

Symptoms:
MPLS label stripping does not participate in the MPLS control-plane, and MPLS does not have a next protocol indicator.

Conditions:
This is encountered when attempting to pass IPv6 packets to GRE-encapsulated MPLS on BIG-IP systems.

Impact:
GRE/MPLS packets with IPv6 traffic encapsulated are not forwarded to the egress VLAN.

Workaround:
None


1033937-1 : HTTP message router stats do not increment for virtual servers and pools

Links to More Info: BT1033937

Component: Local Traffic Manager

Symptoms:
The HTTP MR stats for virtual servers and pools do not increment

Conditions:
- BIG-IP system with HTTP using httprouter and passing traffic.
- View the MRF stats

Impact:
Virtual server and pool stats do not increment.


1033689-1 : BGP route map community value cannot be set to the required range when using AA::NN notation

Links to More Info: BT1033689

Component: TMOS

Symptoms:
The community value for BGP route map entries should allow values of 1-65535 for both components, but it is not allowing 65535 for either component when using AA::NN notation.

Conditions:
-- Using BGP route map community values.
-- Attempting to set one or both components to 65535 with
   using AA::NN notation

Impact:
Unable to use the full range of BGP route map community values.

Workaround:
None


1033537-4 : Cookie persistence profile only examines the first cookie.

Component: Local Traffic Manager

Symptoms:
The cookie persistence profile does not process multiple cookies with the same name. If that cookie is not valid for the selected pool or if it fails to decrypt, if encryption is enabled, it stops - even if there are other cookies of the same name.

Conditions:
-- Virtual server with an HTTP profile and a cookie persistence profile.
-- Multiple cookies with the same name arrive from the client.
 They can appear in a single Cookie header or two separate headers.
-- This can occur with cookie encryption enabled or disabled.

Impact:
Only the first cookie is evaluated.

Workaround:
Do not use cookie persistence profile.


1033333-4 : FIPS: importing a stub SSL key file results in 2 keys that share the same FIPS device

Component: TMOS

Symptoms:
The 'tmsh list sys crypto key' command lists multiple keys with the same FIPS ID.

Conditions:
-- BIG-IP using a FIPS HSM
-- Import the stub FIPS key file contents (the filestore certificate_key file object) into the system as a new file object.

Impact:
Two object points to same key stored in the FIPS HSM. If one of the two objects are deleted, the key stored in the HSM will be deleted. This will result in traffic failures, i.e. TLS handshake failures.

Workaround:
Do not create a second MCP SSL key object by importing the stub key file content from the filestore.


1033025-4 : TMM might crash when unsupported bot iRule is used

Links to More Info: BT1033025

Component: Application Security Manager

Symptoms:
TMM crashes.

Conditions:
Bot defense iRule with async commands is attached to virtual server, for example:

when BOTDEFENSE_ACTION
{
        after 7000 {
            if { ([BOTDEFENSE::device_id] eq "0") }
                {
                    log local0. "Violations Names: [BOTDEFENSE::device_id];"
                    BOTDEFENSE::action browser_challenge
                }
           }

}

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1033021-2 : UI: Partition does not work when clicking through security zones

Links to More Info: BT1033021

Component: Advanced Firewall Manager

Symptoms:
1. Zones UI is not refreshed when the partition changes
2. You are unable to administer zones while using partitions

Conditions:
Change the partition in GUI, then view the corresponding mapped zones.

Impact:
All zones are displayed for every partition instead of just the mapped zones

Workaround:
None


1032921-4 : VCMP Guest CPU usage shows abnormal values at the Host

Links to More Info: BT1032921

Component: TMOS

Symptoms:
CPU usage is represented as 100% for each CPU core, so for instance top may report CPU usage above 100%
for a two CPU system, given that in that case 200% would actually represent the full CPU capacity.

Here for vCMP with 'n' CPUs reporting more than n*100% for CPU utilization.

Conditions:
VCMP provisioned on BIG-IP

Impact:
CPU utilization is incorrectly shown.

Workaround:
NA


1032821-7 : Syslog: invalid level/facility from /usr/libexec/smart_parse.pl

Links to More Info: BT1032821

Component: TMOS

Symptoms:
When the smart_parse.pl script is run and finds a disk error, it attempts to log an error with an incorrect syslog level.

Conditions:
Run smart_parse.pl on a BIG-IP platform with a disk error.

Impact:
When this script is run (usually as a cron job) the following message occurs:

syslog: invalid level/facility: error at /etc/cron.daily/pendsect line 194.

Workaround:
None.


1032329-1 : A user with low privileges cannot open the Rule List editor.

Links to More Info: BT1032329

Component: Advanced Firewall Manager

Symptoms:
When a low privilege user attempts to access the Rule List editor page, they receive the error message "General database error retrieving information."

Conditions:
Attempting to access the Rule List editor as a user with a lower privilege, for example Firewall Manager.

Impact:
You cannot see the details of the Rule List via UI/tmsh

Workaround:
Use TMSH to view Rule List details


1032257-1 : Forwarded PVA offload requests fail on platforms with multiple PDE/TMM

Links to More Info: BT1032257

Component: TMOS

Symptoms:
Forwarded PVA requests use a static bigip_connection that does not have its pva_pde_info initialized, which results in offload failure on platforms that have multiple PDEs per TMM.

Conditions:
Pva_pde_info is not initialized and Forwarded PVA requests occur.

Impact:
Hardware offload does not occur.


1032001-2 : Statemirror address can be configured on management network or clusterd restarting

Links to More Info: BT1032001

Component: TMOS

Symptoms:
- Able to create statemirror address on the same network as management or cluster network.
- Validation issues when attempting to remove a management address.
- Clusterd process restarts constantly.

Conditions:
- Management/cluster address set up with IPv6 and statemirror address is configured with IPv4.

Impact:
- Unable to make configuration changes to the management or cluster address until the statemirror address is removed.
- Clusterd process restarts constantly causing the blade or cluster to report as offline.


1031945-4 : DNS cache configured and tmm stuck in 'not ready' state indefinitely after TMM restart or reboot

Links to More Info: BT1031945

Component: Global Traffic Manager (DNS)

Symptoms:
Clusterd reports "TMM not ready" right after "Active"

Jun 23 18:21:14 slot2 notice sod[10084]: 010c0019:5: Active
Jun 23 18:21:14 slot2 notice clusterd[10920]: 013a0019:5: Blade 2 turned Yellow: TMM not ready

All blades are showing 'unavailable'

Conditions:
1. Multiple dns cache-resolver and/or net dns-resolver objects configured with names that only differ in letter case, e.g. /Common/example-dns-cache and /Common/Example-DNS-cache

2. Occurs after rebooting/upgrading

Impact:
The system remains inoperative.


1031909-2 : NAT policies page unusable due to the page load time

Links to More Info: BT1031909

Component: Advanced Firewall Manager

Symptoms:
You cannot work with the NAT polices page because the page takes too long to load.

Conditions:
-- The device has a large number of VLANs and virtual servers
-- The device has a large number of NAT policies and partitions
-- From GUI navigate to the NAT policies page

Impact:
NAT policies page takes a long time to load.


1031461-2 : Session awareness entries aren't mirrored to both sides of an active-active deployment.

Component: Application Security Manager

Symptoms:
Session awareness entries aren't mirrored to both sides of an active-active deployment.

session db entries remain in bd (ASM) daemon until manually removed

Conditions:
- ASM provisioned
- Security policy attached to a virtual server
- Session tracking and Login Page enabled in the policy

Impact:
ASM session tracking feature isn't properly functioning on active-active deployment.


1031117-1 : The mcpd error for virtual server profiles incompatible needs to have more details

Links to More Info: BT1031117

Component: TMOS

Symptoms:
The mcpd error message MCPDERR_VIRTUAL_SERVER_INCOMPAT_PROFILE_PROTO currently has text which does not provide detail information.
-The error text should also list which profile is problematic, and the protocol that the virtual server is using. This will help Support pinpoint the issue much faster.

Conditions:
- Configure a virtual server with a profile that is invalid for its protocol.

Impact:
The error text not listing which profile is problematic, and the protocol that the virtual server is using.

Workaround:
None.


1031025-3 : Nitrox 3 FIPS: Upgrade from v12.1.x to v14.1.x results in new .key.exp files for the FIPS keys created before upgrade.

Links to More Info: BT1031025

Component: TMOS

Symptoms:
During upgrade from v12.1.x to v14.1.x, New ".key.exp" export file is created for the FIPS keys present in the card.

Conditions:
This happens during the upgrade from v12.1.x to v14.1.x for the existing keys with ".key" extension to it in the label.

It occurs only if the key is deleted/not present in the FIPS card (e.g. a faulty card), and BIG-IP has the configuration / metadata for the missing keys.

Impact:
The upgrade fails while loading the configuration.

Workaround:
Delete the missing key's configuration from config file, then perform the upgrade.


1030533-1 : The BIG-IP system may reject valid HTTP responses from OCSP servers.

Links to More Info: BT1030533

Component: Local Traffic Manager

Symptoms:
When this happens, the BIG-IP system can be seen closing the TCP connection to the OCSP server prematurely (for instance, as soon as the HTTP response headers are received, before the response body is transmitted).

If log.keymgmtd.level is set to debug, an error similar to the following example will be logged to the /var/log/ltm file:

Jun 22 14:40:08 bigip1.local debug tmm[9921]: 01a40004:7: OCSP validation result of certificate(/config/filestore/files_d/Common_d/certificate_d/:Common:endpoint-intermediate_69993_1): OCSP response - (connection - HTTP error), certificate status - (error), lifetime - 10.

Conditions:
The server uses a Content-Type HTTP header in its response that isn't just "application/ocsp-response" (for instance, it may include a charset specification after that string, or the string may use a mix of uppercase and lowercase letters).

Impact:
Valid HTTP responses from OCSP servers are rejected. OCSP stapling and OCSP validation are not available on the BIG-IP system.

Workaround:
If you control the OCSP server and are able to customize its HTTP response headers, setting the Content-Type to simply "application/ocsp-response" (all lowercase) is a workaround for this issue.

Otherwise, no workaround exists.


1030237-1 : Zxfrd core and continual restart when out of configured space

Links to More Info: BT1030237

Component: Global Traffic Manager (DNS)

Symptoms:
Zxfrd is in restart loop and occasionally cores.

Conditions:
Zxfrd is out of the configured space.

Impact:
Dns express and rpz does not work properly.

Workaround:
1. locate any zone that is suspiciously large and delete that zone from dns zones if unexpected;
2. Allocate more space for zxfrd using dnsexpress huge pages.
tmsh modify sys db dnsexpress.hugepages { value "8000" }
8000 should be adjusted accordingly.


1030185-5 : TMM may crash when looking up a persistence record using "persist lookup" iRule commands

Links to More Info: BT1030185

Component: Local Traffic Manager

Symptoms:
Tmm may crash with a SIGSEGV when looking up a persistence record in an iRule when using the "any" flag

Conditions:
-- The persistence entry exists on a virtual server other than the virtual server the iRule is configured on.
-- The iRule contains [persist lookup source_addr "[IP::client_addr] any"]

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Discontinue the use of the "any" flag in the persist lookup iRule.


1030093-1 : An http2 to http2 virtual connection with translate-address disabled might only use one stream on the server side.

Links to More Info: BT1030093

Component: Local Traffic Manager

Symptoms:
When there is no pool object available, this issue results in only stream ID 1 succeeding to the server-side. All subsequent streams fail.

Conditions:
With the following configuration:
-- client side HTTP2
-- server side HTTP2
-- HTTP2 MRF enabled
-- translate-address disabled

Impact:
Connection only works for stream 1. All other streams fail.

Workaround:
If you set "translate-address enabled" on the virtual server, then all streams work fine.


1029989-6 : CORS : default port of origin header is set 80, even when the protocol in the header is https

Component: Application Security Manager

Symptoms:
Destination port is set to 80, instead of 443, for Origin header value that has https in the schema field.

This causes unexpected "Illegal cross-origin request" violation.

Conditions:
- Using CORS enforcement where you allow HTTPS and port 443 for an origin name
- The Origin header value has https in the schema
- The Origin header value does not specify non default port number

Impact:
Unexpected "Illegal cross-origin request" violation.

Workaround:
Allow port 80 or use 'any' for the given origin name.


1029373-4 : Firefox 88+ raising Suspicious browser violations with bot defense

Links to More Info: BT1029373

Component: Application Security Manager

Symptoms:
Bot-defense might block legal traffic arriving from Firefox version 88

Conditions:
- ASM provisioned
- bot-defense profile assigned on a virtual server

Impact:
Legal traffic is blocked

Workaround:
Tmsh modify sys db botdefense.suspicious_js_score value 60


1029173-4 : MCP daemon does not log an error message upon connection failure to PostgreSQL server.

Links to More Info: BT1029173

Component: TMOS

Symptoms:
When mcpd fails to connect to PostgreSQL, the PostgreSQL error code and message is not logged. A very generic exception is thrown when the connection is lost.

Conditions:
- AFM is provisioned.
- Mcpd fails to connect pgsql.

Impact:
The failed connection is not logged, which makes the problem more difficult to troubleshoot.


1029105-1 : Hardware SYN cookie mode state change logs bogus virtual server address

Links to More Info: BT1029105

Component: TMOS

Symptoms:
When a virtual server enters or exits hardware SYN cookie mode, a bogus IP address is logged in /var/log/ltm. For example:

Syncookie HW mode activated, server name = /Common/vs server IP = 0.0.0.3:0

Conditions:
A virtual server enters or exits hardware SYN cookie mode.

Impact:
Only the logging information is wrong, the hardware SYN cookie mode functions correctly.

Workaround:
None


1029069-2 : Non-ASCII characters are not displayed correctly.

Links to More Info: BT1029069

Component: Local Traffic Manager

Symptoms:
1. Add a new address IP with a value that includes non-ASCII characters in the data group list.
2. Go back to GUI->Local Traffic ›› iRules : Data Group List and click it.
The value field does not display entered values.

After clicking update several times you may encounter an error such as:
01070712:3: MCP call 'mcpmsg_set_string_item(m_msg, CID2TAG(cid), val.c_str())' failed with error: 16908375, 01020057:3: The string with more than 65535 characters cannot be stored in a message.

Conditions:
Adding non-ASCII characters to the value field in data group lists.

Impact:
Impacts the functioning of the address record. For example, when the datagroup is called by an iRule.

Workaround:
Do not add non-ASCII characters to the value field.


1028493-1 : Live Update genesis file for Server Technologies installation fails

Links to More Info: BT1028493

Component: Application Security Manager

Symptoms:
Installation of the Live Update genesis file (file included in BIG-IP) fails.

Conditions:
Live Update genesis file version is different than the BIG-IP version.

Impact:
"Server Technologies" will not be properly updated

Workaround:
Install latest "Server Technologies" update manually or upload the latest "Server Technologies" file.


1028081-1 : [F5 Access Android] F5 access in android gets "function () {[native code]}" in logon page

Links to More Info: BT1028081

Component: Access Policy Manager

Symptoms:
1. Users connecting with F5 Access from an Android device see string "function () {[native code]}" in the Logon Page Form 'Username' field.
2. This issue only affects the F5 Access embedded browser. It works fine when connecting from the same Android device using Chrome. F5 Access from iOS is also working fine.

Conditions:
Configure an access policy with modern customization that includes a Logon Page.

Impact:
The string "function () {[native code]}" appears in the Logon Page Form 'Username' field.

Workaround:
This solution is temporal as changes are lost after an upgrade.
steps:
1) create a copy of the original "main.js" file
# cp /var/sam/www/webtop/public/include/js/modern/main.js /var/sam/www/webtop/public/include/js/modern/main.js.origin

2) edit the file using an editor (e.g., vi).
# vi /var/sam/www/webtop/public/include/js/modern/main.js
modify
window.externalAndroidWebHost.getWebLogonUserName to window.externalAndroidWebHost.getWebLogonUserName()
and
window.externalAndroidWebHost.getWebLogonPassword to window.externalAndroidWebHost.getWebLogonPassword()

3) Restart BIG-IP


1027961-2 : Changes to an admin user's account properties may result in MCPD crash and failover

Links to More Info: BT1027961

Component: TMOS

Symptoms:
-- The mcpd process fails with a segmentation fault and restarts, leaving a core-dump file.
-- Active sessions in the Configuration Utility report "unable to contact BIG-IP device".
-- Various processes may record entries into the "ltm" log saying "Lost connection to mcpd."

Conditions:
-- Changes to properties of administrative user-login accounts are occurring.
-- A user account being changed has a current, active session in the Configuration Utility GUI.

Impact:
The failure and restart of mcpd will trigger a restart of many other processes, including the TMM daemons, thus interrupting network traffic handling. In high availability (HA) configurations, a failover will occur.

Workaround:
Before making changes to the account properties of an administrative user, where the changes affect the role, make certain that all GUI Configuration Utility sessions opened by that user are logged out.


1027805-4 : DHCP flows crossing route-domain boundaries might fail.

Links to More Info: BT1027805

Component: Local Traffic Manager

Symptoms:
DHCP flows crossing route-domain boundaries might fail.

Conditions:
Example of a configuration leading to the problem:
- route-domain RD%2 with parent defined as route-domain RD%1.
- Virtual-server in route-domain RD%2.
- Pool member configured in RD%2 (sharing IP addressing with RD1)
- DHCP client connects to the virtual-server in route-domain RD%2.
- Route lookup for a pool member ends up with connection in route-domain RD%1

Impact:
The second and subsequent DHCP clients requests will not be forwarded to the DHCP pool members.

Workaround:
When configuring a DHCP pool member, use the ID of the parent route-domain (the one that will be returned by a route-lookup for the pool member's IP address).


1027481-3 : The log messages 'error: /bin/haloptns unexpected error -- 768' generated on A110 and D112 platforms

Links to More Info: BT1027481

Component: TMOS

Symptoms:
The message 'error: /bin/haloptns unexpected error -- 768' is logged by system commands, including some startup scripts and the software installation process.

Running /bin/haloptns manually displays the following output:
'Expected 32 bit OPTN field, found field "" instead.'

Conditions:
-- One of the following platforms:
  - D112 (10350v-F (FIPS) or 10150s-N (NEBS))
  - A110 (VIPRION B4340N (NEBS) blades)

-- The system does not use RAID.

Impact:
Excessive "error: /bin/haloptns unexpected error -- 768" error messages in log files, and command output (for example, "cpcfg").

There is no other impact, and the messages can be ignored.

Workaround:
Ignore the error messages.


1027477-3 : Virtual server created with address-list in custom partition non-RD0 does not create listener

Links to More Info: BT1027477

Component: TMOS

Symptoms:
After creating a virtual-server in a partition with a non RD0 route-domain attached, the virtual address listener does not get associated with the virtual server and the virtual address stays offline.

Conditions:
-- An address list (traffic matching criteria) is used when creating the virtual server in the GUI.
-- The virtual server is created with a route domain other than the default route domain.

Impact:
The virtual address remains in an offline state.

Workaround:
None.


1027237-1 : Cannot edit virtual server in GUI after loading config with traffic-matching-criteria

Links to More Info: BT1027237

Component: TMOS

Symptoms:
After creating a virtual server with a traffic-matching-criteria and then loading the configuration, you are unable to make changes to it in the GUI. Attempting to do so results in an error similar to:

0107028f:3: The destination (0.0.0.0) address and mask (::) for virtual server (/Common/test-vs) must be be the same type (IPv4 or IPv6).

Conditions:
-- A virtual server that has traffic-matching-criteria (i.e., address and/or port lists).
-- The configuration has been saved at least once.
-- Attempting to edit the virtual server in the GUI.

Impact:
Unable to use the GUI to edit the virtual server.

Workaround:
Use TMSH to modify the virtual server.


1026989-1 : More specific dynamic or static routes created for application traffic processing can erroneously replace the route to the management subnet.

Links to More Info: BT1026989

Component: TMOS

Symptoms:
When a dynamic or static route is instantiated for application traffic processing, protection exists at configuration-validation time to ensure that the new route does not overwrite how the management port's subnet is accessed.

To do so, the destination of the new route is compared to the management port's subnet. If the two match, the new route is only instantiated in TMM, but not in the Linux host's routing table.

The issue is this logic fails when the new route is a subset of the management port's subnet. For example, if the new route is to destination 10.215.50.0/25, and the management port's subnet is 10.215.50.0/24, the new route will be added to both TMM and the Linux host, bypassing the aforementioned protection.

Instead, the logic should check for overlapping subnets, not just strict equality.

Conditions:
- A dynamic or static route whose destination partially overlaps with the management port's subnet is added to or learnt by the system.

Impact:
A new and more specific route for part of the management port's subnet is added to the Linux host's routing table.

Part of the management port traffic can fail or be misrouted via a TMM interface.

If multiple routes of this kind are instantiated (e.g. 10.215.50.0/25 + 10.215.50.128/25), the whole management port's subnet can be overtaken.

Workaround:
Redesign your network and then reconfigure the BIG-IP system so that TMM does not need access to the management port's subnet or part of it (thus negating the need to create a route to that destination in the first place).

If this is not possible, you can temporarily resolve the issue by using the `route` or `ip` utility on the Linux host subsystem to manually fix the routing table. However, the issue will occur again the next time the problematic route is loaded or learnt by the system.


1026973-1 : Static routes created for application traffic processing can erroneously replace the route to the management subnet.

Links to More Info: BT1026973

Component: TMOS

Symptoms:
If a static route is added via "tmsh create net route" (or equivalent configuration ingestion system), and this route's destination matches the management port's subnet, the protection that prevents the new route from being propagated to the Linux kernel will initially work, but will fail after mcpd is restarted or the system is rebooted.

Conditions:
- A static route whose destination matches the management port's subnet is added to the system.

- The system is rebooted or mcpd is restarted.

Impact:
The directly-connected route for the management port's subnet appearing in the Linux host's routing table is replaced, or complemented, by a new and unnecessary route.

In either case, management port traffic can fail or be misrouted via a TMM interface.

Workaround:
Align your network and the BIG-IP system so that TMM does not need access to the management port's subnet (thus negating the need to create a route to that destination in the first place).

If this is not possible, you can temporarily resolve the issue by using the `route` or `ip` utility on the Linux host subsystem to manually fix the routing table. However, the issue will occur again the next time mcpd or the system restarts.


1026861-3 : Live Update of Browser Challenges and Anti-Fraud are not cleaned up

Links to More Info: BT1026861

Component: TMOS

Symptoms:
When installing live updates of either Browser Challenges (ASM) or Anti-Fraud (FPS), the update file remains in the system, taking up disk space and increasing config sync size.

Conditions:
Installing Live Update files of either Browser Challenges (part of ASM) or Anti-Fraud (part of FPS).

Impact:
Increased disk size, config size, and config-sync size.

Workaround:
It is possible to manually clean up old, unused Live Update files using TMSH or REST:
tmsh delete security datasync update-file datasync-global/<file>

Important: Use caution, as deleting update-files that are in use could cause the system to go offline or get out of sync. The in-use update files can be observed under the GENERATION PROFILES section of the /var/log/datasyncd.log file.

Note: There is no auto-completion on the 'update-file' keyword.


1026813-7 : LCD IP address is missing from /etc/hosts on iSeries

Links to More Info: BT1026813

Component: Global Traffic Manager (DNS)

Symptoms:
On iSeries platforms, /etc/hosts is missing an entry for the LCD IP address, 127.4.2.2.

Conditions:
Run any iSeries appliance.

Impact:
- BIG-IP generates reverse DNS requests for the LCD.
- /var/log/touchscreen_lcd lists the IP address "127.4.2.2" as the hostname

Workaround:
Add an entry for the LCD to /etc/hosts by modifying the 'remote-host' global settings, by running the following tmsh command:

tmsh modify sys global-settings remote-host add { lcd { addr 127.4.2.2 hostname lcd } }
tmsh save sys config

Or, in the BIG-IP GUI, System >> Configuration : Device : Hosts


1026781-3 : Standard HTTP monitor send strings have double CRLF appended

Links to More Info: BT1026781

Component: Local Traffic Manager

Symptoms:
Standard (bigd-based, not In-TMM) HTTP monitors have a double CRLF appended (\r\n\r\n) to the send string. This does not comply with RFC1945 section 5.1 which states requests must terminate with a single CRLF (\r\n). This non-compliant behavior can lead to unexpected results when probing servers.

Conditions:
Standard bigd (not In-TMM) HTTP monitors

Impact:
Servers probed by these non-RFC-compliant HTTP monitors may respond in an unexpected manner, resulting in false negative or false positive monitor results.

Workaround:
There are several workarounds:

1. If running 13.1.0 or later, switch monitoring from bigd-based to In-TMM. In-TMM monitors properly follow RFC1945 and will send only a single CRLF (\r\n)

2. Remain with bigd-based monitoring and configure probed servers to respond to double CRLF (\r\n\r\n) in a desired fashion

Depending on server configuration, a customized send string, even with the double CRLF, may still yield expected responses.


1026621-1 : DNS cache resolver could not connect to remote DNS server with snatpool if multiple routes exist

Links to More Info: BT1026621

Component: Global Traffic Manager (DNS)

Symptoms:
DNS query could not be resolved properly.

Conditions:
1. dnscache.matchwildcardvip is enabled
2. Multiple possible routes to destination DNS server exist. This can be triggered by either using a gateway pool, or using dynamic routing with multiple equal paths available.

Impact:
Unable to use snatpool for cache resolver.

Workaround:
Ensure only a single route to destination exists, or disable dnscache.matchwildcardvip

NOTE: With dnscache.matchwildcardvip disabled, snatpool will not be used.


1026581-4 : NETFLOW/IPFIX observationTimeMilliseconds Information Element value is not populated correctly.

Links to More Info: BT1026581

Component: TMOS

Symptoms:
When logging Carrier Grade NAT Port Port Block Allocation (CGNAT PBA) events using NetFlow/IPFIX log destinations,
if the AFM module is not enabled, the observationTimeMilliseconds Information Element value is incorrectly reported as zero in reported events.

Conditions:
Using CGNAT PBA, logging to a NetFlow/IPFIX log destination, and AFM is not enabled.

Impact:
CGNAT PBA events containing the observationTimeMilliseconds Information Element will report incorrect values for this field.

Workaround:
1) Enable AFM module, or
2) Enable lsn-legacy-mode in the log profile


1026277-6 : Apply Policy can get ignored in auto-sync setup, while importing/replacing several existing policies with policies that have Policy Builder enabled

Links to More Info: BT1026277

Component: Application Security Manager

Symptoms:
With auto-sync enabled, replacing multiple policies on Unit-A with policies having Policy Builder enabled, "Apply Policy" initiated by Policy Builder can be ignored at Unit-B that results all the policy on Unit-A appear as not-edited while a few policies on Unit-B appear as edited.

Conditions:
-- Using auto-sync
-- Multiple policies are replaced (imported as replacing method) at the same time
  Note : bulk import/replace is only possible via Ansible (also, maybe scripting that utilizes REST API)
-- Those imported policies have Policy Builder enabled

Impact:
Inconsistent policy state in auto-sync members

Workaround:
Make a minor update on those affected policies, then "Apply Policy" will fix the inconsistent state.


1026273-4 : HA failover connectivity using the cluster management address does not work on VIPRION platforms

Links to More Info: BT1026273

Component: TMOS

Symptoms:
Upon upgrade to an affected version, failover communication via the management port does not work. You may still see packets passing back and forth, but the listener on the receiving end is not configured, and therefore the channel is not up.

Here are a few symptoms you may see:
-- Running 'tmsh show cm failover-status' shows a status of 'Error' on the management network.

-- Running 'tmctl' commands reports the disconnected state:
Example:
$ tmctl -l sod_tg_conn_stat -s entry_key,last_msg,status
entry_key last_msg status
----------------------------- ---------- ------
10.76.7.8->10.76.7.9:1026 0 0 <--- Notice there is no 'last message' and 'status' is 0, which means disconnected.
10.76.7.8->17.1.90.2:1026 1623681404 1

-- Looking at 'netstat -pan | grep 1026 command output, you do not see the management port listening on port 1026:
Example (notice that the management IP from the above example of 10.76.7.9 is not listed):
# netstat -pan | grep 1026
udp 0 0 10.10.10.10:1026 0.0.0.0:* 6035/sod

-- Listing /var/run/ contents shows that the chmand.pid file is missing:
 # ls /var/run/chmand.pid
ls: cannot access /var/run/chmand.pid: No such file or directory

Conditions:
-- Running on VIPRION platforms
-- Only cluster management IP address is configured: No cluster member IP addresses are configured
-- Install a software version where ID810821 is fixed (see https://cdn.f5.com/product/bugtracker/ID810821.html)
-- Management IP is configured in the failover configuration

Impact:
If only the management is configured for failover or there are communication issues over the self IP (such as misconfigured port lockdown settings), then the devices may appear to have unusual behavior such as both going active.

Workaround:
-- Configure a cluster member IP address on each individual blade in addition to the Cluster management IP address.


1025965-1 : Audit role users cannot see folder properties under sys-folder

Links to More Info: BT1025965

Component: TMOS

Symptoms:
Users with auditor role cannot create, modify, or delete any data, nor can they view SSL keys or user passwords. Users with the Auditor role have access to all partitions on the system, and this partition access cannot be changed.

Conditions:
Run tmsh command to check the access under sys folder

Impact:
Tmsh does not allow sys folder component for auditor.
no-ref-check, traffic-group, device-group


1025513-1 : PAM Authenticator can cause authorization failure if it fails to lock /var/log/tallylog

Links to More Info: BT1025513

Component: TMOS

Symptoms:
The following JSON content can be seen in the HTTP 401 response. (By looking at the capture or RESTful client)

{"code":401,"message":"Authorization failed: no user authentication header or token detected. Uri:http://localhost:8100/mgmt/tm/ltm/pool/?expandSubcollections=true Referrer:<ip_address> Sender:<ip_address>,"referer":<ip_address>,"restOperationId":12338804,"kind":":resterrorresponse"}


Contention for /var/log/tallylog lock might result in users failing to authenticate correctly. As a result of this issue, you might see the following message:

 PAM Couldn't lock /var/log/pam/tallylog : Resource temporarily unavailable.

Conditions:
High concurrent authentication attempts may trigger this issue. For example, opening a connection, using basic authentication, performing a query (for example, get node list, get virtual address list, and set pool min active members), and then closing the connection. If done frequently enough, there is an occasional authentication failure.

Impact:
This intermittent auth issue results in failure of some auth request.

Workaround:
Since this is an intermittent authentication failure, wait a few seconds and then attempt to rerun auth request.

For automation tools, please use token-based authentication.


1025089-1 : Pool members marked DOWN by database monitor under heavy load and/or unstable connections

Links to More Info: BT1025089

Component: Local Traffic Manager

Symptoms:
BIG-IP database monitors (mssql, mysql, oracle, postgresql) may exhibit one of the following symptoms:

- Under heavy, sustained load, the database monitoring subsystem may become unresponsive, causing pool members to be marked DOWN and eventually causing the database monitoring daemon (DBDaemon) to restart unexpectedly.

- If the network connection to a monitored database server is unstable (experiences intermittent interruptions, drops, or latency), pool members may be marked DOWN as the result of a momentary loss of connectivity. This is more likely to occur when a database monitor is used to monitor a GTM pool member instead of an LTM pool member, due to differences between how monitors are configured for GTM versus LTM.

Conditions:
These symptoms may occur under the following conditions:

- The database monitoring subsystem may become unresponsive, and the database monitoring daemon (DBDaemon) may restart unexpectedly, if a large number of LTM or GTM pool members are being monitored by database monitors, and/or with short polling intervals ("interval" of 10 seconds or less), or when GTM pool members are monitored by database monitors with a short "probe-timeout" value (10 seconds or less).

- The GTM pool members may be marked DOWN after a single interrupted connection if they are monitored by a database monitor, configured with a short "probe-timeout" value (10 seconds or less) and "ignore-down-response" configured as "disabled" (default).

Impact:
-- High CPU utilization is observed on control plane cores.

-- The database monitoring daemon (DBDaemon) may restart unexpectedly, causing GTM or LTM pool members monitored by a database monitor to be marked DOWN temporarily.

-- GTM or LTM pool members monitored by a database monitor may be marked DOWN temporarily if the network connection to the database server is dropped or times out.

Workaround:
Perform one of the following actions:

-- Configure the database (mssql, mysql, oracle, postgresql) monitor with a "count" value of "1". This prevents the caching or reuse of network connections to the database server between probes. Thus there is no cached connection to time out or get dropped. However, the overhead of establishing the network connection to the database server will be incurred for each probe and will result in generally higher (but more consistent) CPU usage by the database monitoring daemon (DBDaemon).

-- Configure the database monitor "interval" and "timeout" values (for an LTM monitor), or the "interval", "timeout", "probe-attempts", "probe-interval" and "probe-timeout" values (for a GTM monitor) such that multiple failed monitor probes are required before the monitored member is marked DOWN, and with a minimum value of 10 seconds or greater.

Note: A restart of bigd (and consequently the DBDaemon) might be necessary to properly clear any currently stale/stuck database connections.


1024905-1 : GTM monitor times out if monitoring a virtual server with translation address

Links to More Info: BT1024905

Component: Global Traffic Manager (DNS)

Symptoms:
GTM monitor flaps between UP and DOWN.

Conditions:
1. GTM configured with two type of IP addresses, one IPv4 with translated address and IPv6 without translated address, or the other way around.
2. The monitored resource is with the translated address of the other type. If step 1, IPV4 translated, then step with IPV4 translated address.

Impact:
Monitor flaps.

Workaround:
Configure both with translated address.


1024553-1 : GTM Pool member set to monitor type "none" results in big3d: timed out

Links to More Info: BT1024553

Component: Global Traffic Manager (DNS)

Symptoms:
A pool member is marked down with a 'none' type monitor attached.

Conditions:
-- GTM pool member with a 'none' monitor configured

Impact:
Setting a pool member to have "none" monitor should result in a blue "checking" status but it may mark the pool member as down/unavailable.

Workaround:
NA.


1024421-2 : At failover, ePVA flush leads to clock advancing and MPI timeout messages in TMM log

Links to More Info: BT1024421

Component: TMOS

Symptoms:
TMM log shows clock advancing and MPI timeout messages:

notice slot1 MPI stream: connection to node aborted for reason: TCP RST from remote system (tcp.c:5201)
notice slot1 tmm[42900]: 01010029:5: Clock advanced by 6320 ticks

Conditions:
-- pva.standby.flush DB key set to 1 (enabled). The default is 0.
-- Processing high traffic volume for some time

Impact:
Upstream switch could receive flow response from both active and standby units and cause a traffic disturbance.


1024301-1 : Missing required logs for "tmsh modify disk directory" command

Links to More Info: BT1024301

Component: TMOS

Symptoms:
In case of failure of "tmsh modify disk directory" command, log which help to find reason for failure are getting missed.

Conditions:
Attempt to resize some volumes via the "tmsh modify disk directory" command

Impact:
Not able to find failure reason for resize of volumes.

Workaround:
Manually running the resize2fs command, can give the reason for failure.


1024269-1 : Forcing a file system check on the next system reboot does not check all filesystems.

Links to More Info: BT1024269

Component: TMOS

Symptoms:
Forcing a file system check on the next system reboot, as described in K73827442, does not check all filesystems. This should not be the case and is a regression compared to previous BIG-IP versions.

After the reboot, you can inspect which filesystems were checked by running the following command:

journalctl --all --no-pager | grep -i fsck

Conditions:
A BIG-IP Administrator follows the procedure to force a file system check on the next system reboot.

Impact:
Some filesystems will not be fixed, and will continue to be corrupted. This can have a number of negative consequences. For instance, enlarging a filesystem (via the 'tmsh modify sys disk directory' command) can fail when a filesystem is dirty.

Workaround:
You can boot the system from the Maintenance Operating System (MOS), and perform all needed file system check operations from there. To boot the system into MOS, simply type 'mosreboot'. Note that once the system reboots into MOS, you will need video console access (for VE systems) or serial console access (for hardware systems) to be able to run fsck and the reboot the system into a regular BIG-IP boot location.

For more information on MOS, please refer to K14245.


1024241-1 : Empty TLS records from client to BIG-IP results in SSL session termination

Links to More Info: BT1024241

Component: Local Traffic Manager

Symptoms:
After client completes TLS handshake with BIG-IP, when it sends an empty TLS record (zero-length cleartext), the client BIG-IP SSL connection is terminated.

Conditions:
This is reported on i7800 which has Intel QAT crypto device
The issue was not reported on Nitrox crypto based BIG-IP platforms. Issue is not seen when hardware crypto is disabled.

Impact:
SSL connection termination is seen in TLS clients.

Workaround:
Disable hardware crypto acceleration.


1023889-3 : HTTP/HTTPS protocol option in storage filter do not suppress WS/WSS server->client message

Links to More Info: BT1023889

Component: Application Security Manager

Symptoms:
Protocol filter does not suppress WS/WSS server->client message.

Conditions:
- protocol filter is set to HTTP, HTTPS or HTTP/HTTPS
- response logging is set to For All Requests

Impact:
Remote log server receives unexpected messages

Workaround:
None


1023829-2 : Security->Policies in Virtual Server web page spins mcpd 100%, which later cores

Links to More Info: BT1023829

Component: TMOS

Symptoms:
With a large number of VLANs (3000+) and virtual servers (2000+), the virtual server list page consumes excessive resources, eventually leading to a mcpd crash.

Conditions:
-- A huge number of VLANs and virtual servers exist.
-- The virtual server list page is displayed

Impact:
Page becomes inaccessible. Mcpd may crash. Traffic and control plane disrupted while mcpd restarts.


1023817-2 : Misleading "Enabling NAT64 for virtual server with security NAT policy configured is redundant/not required." warning

Links to More Info: BT1023817

Component: TMOS

Symptoms:
While loading the configuration or specifying that NAT64 should be disabled on a virtual server, a warning is displayed or logged:

"Enabling NAT64 for virtual server with security NAT policy configured is redundant/not required."

This warning should only be displayed when a virtual server has both NAT64 enabled and a security NAT policy present, but may occur incorrectly even when NAT64 is disabled.

Conditions:
This warning may be incorrectly generated when all of these conditions are met:

-- a multi-bladed VIPRION
-- virtual servers in the configuration security NAT policies
-- receiving a ConfigSync from a peer, or running "tmsh load sys config" on the primary blade

Impact:
An erroneous warning is logged. It can be safely ignored.


1023529-2 : FastL4 connections with infinite timeout may become immune to manual deletion and remain in memory.

Links to More Info: BT1023529

Component: Local Traffic Manager

Symptoms:
Command "tmsh show sys tmm-traffic" reports non-zero number of current connections but "tmsh show sys connection" shows nothing.

Conditions:
-- A virtual sever with fastL4 profile with infinite timeout enabled and an iRule containing "after" command. Having "-periodic" argument makes the problem more prominent.
-- Aggressive sweeper activated due to low memory conditions.

Impact:
Connections that were supposed to be removed by aggressive sweeper but were waiting for completion of an iRule may end up in a state where they are not reported by "tmsh show sys connection." Because of this issue, these connections cannot be deleted manually using 'tmsh del sys connection", but remain in memory. Their presence can be confirmed by non-zero number of current connections shown by "tmsh show sys tmm-traffic". Because of the infinite timeout setting, they will not timeout by themselves either.

Workaround:
N/A


1023461-2 : Multiple entries for CGNAT when PBA pools allocation is defined: for each request, a new entry is created

Links to More Info: BT1023461

Component: Carrier-Grade NAT

Symptoms:
Two pools are configured, for example:
A: any destination
B: destination 8.8.8.8

1. Making connections and utilizing port block allocation (PBA) pool A works as expected; pools are correctly allocated and released as needed.
2. When a client has active PBA pool A allocated and requests pool B (because of connectivity to specific destination IP), then each subsequent connection request from that client results in new PBA pool B allocation.

Conditions:
Multiple rules are defined to configure PBA.

Impact:
If a request does not belong to the first pool then it will not belong any other, so the system creates a new pool.

Workaround:
None


1023229-1 : False negative on specific authentication header issue

Links to More Info: BT1023229

Component: Application Security Manager

Symptoms:
Blocking does not occur on a specific authentication header issue when a non-default internal parameter is set.

Conditions:
ignore_authorization_header_decode_failure is not set to 0

Impact:
A request with an authentication header issue can pass.

Workaround:
None


1022997-1 : TCP segments with an incorrect checksum are transmitted when the sock driver is used in AWS deployments (e.g., 1NIC)

Links to More Info: BT1022997

Component: TMOS

Symptoms:
Deployments on AWS that use the sock driver (1NIC, for example) transmit packets with bad checksums when TSO/GSO is required. This causes significant delays as TMM re-segments the packets with correct checksums for retransmission, and may cause some operations to time out (such as configsyncs of large configurations).

Conditions:
-- BIG-IP Virtual Edition (VE) using the sock driver on AWS (all 1NIC deployments use this)
-- TSO/GSO required due to MTU limitations on one or more VLANs

Impact:
-- Delayed packets.
-- Possible timeouts for some operations (configsyncs, for example).

Workaround:
Modify (or create, if not present) the file /config/tmm_init.tcl on the affected BIG-IP systems, and add the following line to it:

ndal force_sw_tcs off 1d0f:ec20

Then restart TMM:

bigstart restart tmm

Note: Restarting TMM will cause a failover (or an outage if there is no high availability (HA) peer available).


1022973-2 : Sessiondb entries related to Oauth module not cleaned up in certain conditions

Links to More Info: BT1022973

Component: Access Policy Manager

Symptoms:
When an OAuth AS is configured with a refresh lifetime of '0', this implies that the refresh token lifetime is infinite. This leads to all sessiondb entries related to this refresh token (including associated access token entries in sessiondb) to have infinite lifetime.

Conditions:
Refresh token lifetime is set to '0'.

Impact:
User will see consistent and persistent increase in memory consumption by TMM, potentially leading to out-of-memory situation.

Workaround:
Do not set refresh token lifetime to '0'.


1022877-3 : Ping missing from list of Types for OAuth Client

Links to More Info: BT1022877

Component: Access Policy Manager

Symptoms:
Ping is missing from the 'Type' dropdown menu in Access ›› Federation : OAuth Client / Resource Server : OAuth Server ›› New OAuth Server Configuration...

Conditions:
-- Affected BIG-IP version
-- Add new Oauth server configuration from Access :: Federation : OAuth Client / Resource Server : OAuth Server :: New OAuth Server Configuration...

Impact:
Oauth client configuration for the server of type 'Ping' cannot be created via GUI

Workaround:
Use tmsh to create the configuration, e.g.:

tmsh create apm aaa oauth-server <server name> provider-name Ping dns-resolver-name <dns-resolver-name>


1022613-1 : Cannot modify Security "global-network" Logging Profile

Links to More Info: BT1022613

Component: Advanced Firewall Manager

Symptoms:
When attempting to update the settings of the Security Logging profile, the window displays a modal dialog box titled "Saving Logging Profile" and never completes the update Action

Conditions:
"global-network" logging profile is selected for update

Impact:
You are unable to update the log settings for the "global-network" profile via UI

Workaround:
Use tmsh


1022421-4 : Pendsec utility incorrectly starts on i2x00/i4x00 platform with NON WD disk

Links to More Info: BT1022421

Component: TMOS

Symptoms:
The pendsec utility recognizes that the disk is a HDD and attempts to run a smart check against it but it does not recognize or support the disk type that is in the system and therefore you will see log messages like this in /var/log/messages when the cron job attempts to run:

   May 14 15:34:04 fqdn.device.com notice pendsect[11461]: skipping drive --
   May 14 15:34:04 fqdn.device.com notice pendsect[11461]: No known drives detected for pending sector check. Exiting

Conditions:
- i2x00 or i4x00 platform with the Seagate brand HDD

Impact:
Cosmetic

Workaround:
You can mitigate the cosmetic log issue by suppressing the pendsec utility.

Login to BIG-IP using SSH
 
 Navigate to /etc/cron.daily
# cd /etc/cron.daily
 
Create new directory called suppress
# mkdir suppress
 
Move the pendsect cron job to suppres
# mv pendsect suppress


1022297-4 : In BIG-IP GUI using "Select All" with filters is not working appropriately for policies

Links to More Info: BT1022297

Component: TMOS

Symptoms:
In BIG-IP GUI using "Select All" with filters is not working appropriately for policies. When you attempt to delete policies after using filtering, all policies are deleted.

Conditions:
In BIG-IP GUI policies page, apply filter and using select all, for an action is selecting all objects and filter not applied.

Impact:
All policies objects are affected for an action, and filter is not applied


1022213-4 : DDOS: BDOS: Warning messages related to high availability (HA) watchdog seen on system bring up

Component: Advanced Firewall Manager

Symptoms:
When the BDoS log message level is set to "Warning", some high availability (HA) watchdog messages are logged:

info bdosd[14184]: BDoS: May 27 03:51:40|loadState|460|HA Watchdog was not found <DNS_CLASS_L>

Conditions:
-- DDoS is used.
-- Dynamic signature is enabled on vectors
-- Default BDoS log level is changed to Warning.

Impact:
Unwanted log messages displayed. They can be safely ignored.


1021925-4 : During bootup AWS BIG-IP endpoint was not licensed when custom gateway configured over management interface

Links to More Info: BT1021925

Component: TMOS

Symptoms:
AWS-based BIG-IP instance with a static IP assigned to the mgmt interface and a custom gateway configured, the box fails to load its license during startup.

Conditions:
BIG-IP configured with static IP address and customize gateway for default route.

Impact:
BIG-IP fails to load license.

Workaround:
Once BIG-IP boots up, execute reloadlic command which installs the license.


1021873-1 : TMM crash in IPIP tunnel creation with a pool route

Links to More Info: BT1021873

Component: TMOS

Symptoms:
In rare circumstances, the Traffic Management Microkernel (TMM) process may produce a core file in the /shared/core directory while processing traffic.

Conditions:
1)Virtual server attached with an ipip encapsulation enabled pool
2)Multiple paths to pool members
(pool route to pool member)

Impact:
Traffic disrupted while tmm restarts.


1021837-3 : When a virtual server has an inline service profile configured, connections will be reset with cause "No server selected"

Links to More Info: BT1021837

Component: Local Traffic Manager

Symptoms:
Connections are reset with "No server selected" cause.

Conditions:
-- An inline service profile ("ltm profile service") attached to a normal virtual server

Impact:
TCP connections are reset

Workaround:
Delete and recreate the virtual server without the inline service profile associated with it.

Simply removing the service profile from the virtual server is not sufficient.


1021609-1 : Improve matching of URLs with specific characters to a policy.

Links to More Info: BT1021609

Component: Application Security Manager

Symptoms:
Request with a URL containing specific characters is not matched to the correct policy.

Conditions:
URL of request contains specific percent-encoded characters.

Impact:
The request will not be matched by an expected policy rule.

Workaround:
Add an additional rule with explicit decoded characters.


1021109-4 : The cmp-hash VLAN setting does not apply to trunked interfaces.

Links to More Info: BT1021109

Component: TMOS

Symptoms:
-- CPU usage is increased.
-- Throughput is reduced.
-- Packet redirections occur (visible when using 'tmctl -d blade tmm/flow_redir_stats')

Conditions:
-- Traffic is received on trunked interfaces.
-- The cmp-hash setting has a non-default value.
-- The platform is BIG-IP Virtual Edition (VE).

Impact:
Performance is reduced. Output from 'tmctl -d blade tmm/flow_redir_stats' shows redirections.

Workaround:
-- Use the default cmp-hash setting.
-- Do not trunk interfaces.


1020277-1 : Mcpd may run out of memory when build image is missing

Links to More Info: BT1020277

Component: TMOS

Symptoms:
After installing a new blade, if the BIG-IP does not have the appropriate images to install all volumes onto the new blade, it can get stuck waiting to install. This may cause mcpd to eventually run out of memory.

Running "tmsh show sys software" shows a message similar to this for a prolonged period of time:

HD1.2 3 BIG-IP 12.1.3.5 0.0.10 no waiting for product image (BIG-IP 12.1.3)

Conditions:
-- Installing a new blade into a chassis-based system.
-- Missing BIG-IP image(s) necessary to update all volumes on the new blade.

Impact:
Mcpd eventually runs out of memory and cores.

Workaround:
Either delete the affected volume if it is no longer necessary, or copy the appropriate BIG-IP image to /shared/images.


1020149-4 : Bot Defense does not support iOS's WKWebView framework

Links to More Info: BT1020149

Component: Application Security Manager

Symptoms:
When using the Bot Defense Profile, mobile apps which use iOS's WKWebView framework may get blocked from accessing the website.

Conditions:
-- Using the Bot Defense Profile
-- Mobile apps which use iOS's WKWebView framework try to access the website

Impact:
Mobile apps which use iOS's WKWebView framework may get blocked from accessing the website.

Workaround:
None


1020129-2 : Turboflex page in GUI reports 'profile.Features is undefined' error

Links to More Info: BT1020129

Component: TMOS

Symptoms:
The System :: Resource Provisioning : TurboFlex page is unusable, and the BIG-IP GUI reports an error:

An error occurred: profile.Features is undefined.

Conditions:
-- BIG-IP iSeries appliance
-- Upgrade to:
--- v15.1.3 or later within v15.1.x
--- v16.0.1.2 or later within v16.0.x
--- v16.1.0 or later
-- Accessing the System :: Resource Provisioning : TurboFlex page in the BIG-IP GUI

Impact:
Unable to manage TurboFlex profile via the BIG-IP GUI.

Workaround:
Use tmsh or iControl REST to manage TurboFlex profile configuration.


1020109-1 : Subnet mask property of virtual addresses not displayed in management GUI

Links to More Info: BT1020109

Component: TMOS

Symptoms:
You cannot determine the subnet mask for a displayed virtual address using only the BIG-IP management GUI.

Conditions:
-- A virtual address (automatically created by any virtual server) exists in the configuration.
-- Using the management GUI.

Impact:
Potential difficulty in troubleshooting and verifying config due to having to use other methods (accessing the CLI) to check a virtual address's netmask.

Workaround:
Use tmsh to determine the subnet mask.


1020089-1 : MCP validation should prevent defining multiple virtual servers with the same virtual address but with different subnet masks

Links to More Info: BT1020089

Component: TMOS

Symptoms:
Multiple virtual servers with the same virtual address but with different subnet masks are allowed.

Conditions:
Creation of multiple virtual servers with the same virtual address but with different subnet masks.

Impact:
Latest virtual server instantiation implicitly and silently modifies the subnet mask of the virtual address, making the system not behave as the user thinks or intended.

Workaround:
None.


1020069-1 : Equinix SmartKey HSM is not working with nethsm-partition 'fortanix'

Links to More Info: BT1020069

Component: Local Traffic Manager

Symptoms:
Setting up the Equinix SmartKey HSM with nethsm-partition 'fortanix' (or anything other than 'auto') pkcs11d logs an error:

err pkcs11d[21535]: 01680040:3: netHSM: Failed to find partition with label 'fortanix' on the netHSM.

Conditions:
Configuring a nethsm-partition other than 'auto'.

Impact:
BIG-IP does not connect to the HSM and SSL traffic is disrupted.

Workaround:
Use the nethsm-partition 'auto'
tmsh create sys crypto fips nethsm-partition 'auto'


1020061-3 : Nested address lists can increase configuration load time

Links to More Info: BT1020061

Component: Advanced Firewall Manager

Symptoms:
Whenever there are a number of nested address lists configured, the 'load sys config' command takes a long time to complete.

Conditions:
-- Several nested Address Lists are configured.
-- The 'load sys config' command is run.

Impact:
Upgrading (load sys config) takes a lot of time of time to complete, which sometimes causes Packet Correlation Classification Daemon (pccd) to fail.

If pccd fails, the system is unable to detect and compile firewall configuration changes, meaning that changes made to the firewall configuration are not enforced.

Note: The firewall configuration that was running before pccd goes down continues to be enforced; only changes are not enforced.

Workaround:
None


1020041-3 : "Can't process event 16, err: ERR_NOT_FOUND" seen in tmm logs

Component: Policy Enforcement Manager

Symptoms:
The following message may be logged to /var/log/tmm*

   Can't process event 16, err: ERR_NOT_FOUND

Conditions:
Applying a PEM policy to an existing session that already has that policy (eg, through an irule using 'PEM::subscriber config policy referential set xxxx'

Impact:
Since the PEM policy is already applied to the session, the failure message is essentially cosmetic, but it can cause the tmm logs to grow in size if this is happening frequently.

Workaround:
--


1020005-1 : OOM errors after upgrade and VE instance unresponsive

Links to More Info: BT1020005

Component: TMOS

Symptoms:
VE is unstable or unresponsive and Out of Memory (OOM) errors after the upgrade.

Conditions:
- Configuration failures during upgrades.

Impact:
VE instance may go unstable or unresponsive.

Workaround:
Resolve configuration error and load the configuration where provisioning will setup enough memory to host.


1019793-2 : Image2disk does not work on F5OS BIG-IP tenant.

Links to More Info: BT1019793

Component: TMOS

Symptoms:
Image2disk fails to recognize the correct disk to install and installation fails.

Conditions:
This occurs with BIG-IP tenants that are running in F5OS partitions.

Impact:
Installation fails.

Workaround:
None


1019749-2 : Enabling DHCP for management should not be allowed on vCMP guest

Links to More Info: BT1019749

Component: TMOS

Symptoms:
Options to enable DHCP for the management interface are available on vCMP guests.

Conditions:
-- BIG-IP vCMP guest running on an appliance

Impact:
VCMP guest can be configured with options that are incompatible with VCMP operation.

This might result in a loss of management IP in the guest after a reboot

Workaround:
Do not attempt to DHCP on the management interface of a vCMP guest.


1019709-1 : Modifying mgmt-dhcp options should not be allowed on VCMP guest

Links to More Info: BT1019709

Component: TMOS

Symptoms:
Option to modify mgmt-dhcp to dhcpv4 or dhcpv6 is available on VCMP guest.

Conditions:
This is encountered with the following tmsh command

modify sys global-settings mgmt-dhcp
Values:
  dhcpv4 dhcpv6 disabled enabled

Impact:
VCMP guest can be configured with options that are incompatible with VCMP operation.

This might result in a loss of management IP in the guest after a reboot

Workaround:
N/A


1019641-3 : SCTP INIT_ACK not forwarded

Links to More Info: BT1019641

Component: Local Traffic Manager

Symptoms:
After SCTP link down/up (not physical IF link down up), SCTP session can't be established.

Conditions:
-- CMP forwarding enabled (source-port preserve-strict)
-- The BIG-IP system is encountering heavy traffic load
-- A connection is deleted from the connection table

Impact:
Flow state can become out of sync between TMMs

Workaround:
Once the problem occurs, execute "tmsh delete sys connection", and the SCTP session will be re-established.


1019557-1 : Bdosd does not create /var/bdosd/*.json

Links to More Info: BT1019557

Component: Advanced Firewall Manager

Symptoms:
JSON files for historical data are not created for each virtual server in /var/bdosd.

BDOS for DDoS works on current data in memory but cannot to depend on the historical data for all virtual servers

Conditions:
BDOS is configured for any virtual server

Impact:
Custom signature or BDDoS-generated signature for the virtual server does not work correctly.

Workaround:
None


1019481-1 : Unable to provision PEM on VELOS platform

Links to More Info: BT1019481

Component: Policy Enforcement Manager

Symptoms:
Unable to provision PEM on VELOS platform

Conditions:
When trying to provision PEM

Impact:
PEM functionality cannot be achieved

Workaround:
Change sys db provision.enforce value to false and load sys config


1019453-1 : Core generated for autodosd daemon when synchronization process is terminated

Links to More Info: BT1019453

Component: Advanced Firewall Manager

Symptoms:
Autodosd cores on SIGSEGV.

Conditions:
-- AFM DoS vectors configured
-- This can occur during normal operation but the specific conditions that trigger it are unknown

Impact:
Autodosd is restarted, but up to 15 seconds of history may be lost.

Workaround:
None


1019429-1 : CMP Forwarded flows do not get syncache counter decremented when only server-side is PVA accelerated

Links to More Info: BT1019429

Component: TMOS

Symptoms:
Virtuals with CMP forwarded flows and PVA acceleration may see a higher than expected syncache counter which can lead to permanent syncookie activation.

Also, under certain conditions the internal listeners used for config-sync may have syncookies activated. Logs will show the syncookie counter increasing after every activation.

bigip1 warning tmm1[18356]: 01010038:4: Syncookie counter 9830 exceeded vip threshold 2496 for virtual = 192.168.1.1:4353
bigip1 warning tmm1[18356]: 01010038:4: Syncookie counter 9834 exceeded vip threshold 2497 for virtual = 192.168.1.1:4353

Conditions:
-- Virtual servers with CMP forwarded flows - commonly occurring when the FTP profile is in use.
-- A platform with PVA acceleration enabled.
-- Only the server-side flow of a connection is offloaded to hardware.

Impact:
Elevated syncache_curr, epva_connstat.embryonic_hw_conns, epva_connstat, embryonic_hw_tcp_conns stas. Improper syncooke activation. Syncookie activation on the config-sync listener may cause config-sync to fail.

Workaround:
Remove the ftp profile or disable PVA acceleration:

modify sys db pva.acceleration value none


1019285-1 : Systemd hangs and is unresponsive

Links to More Info: BT1019285

Component: TMOS

Symptoms:
When memory is exhausted on the system and systemd tries to fork to start or stop a service, systemd fails and enters "freeze" mode.

Conditions:
Following log messages can be seen in the daemon.log log file:

err systemd[1]: Failed to fork: Cannot allocate memory
crit systemd[1]: Assertion 'pid >= 1' failed at src/core/unit.c:1997, function unit_watch_pid(). Aborting.
emerg systemd[1]: Caught <ABRT>, cannot fork for core dump: Cannot allocate memory
emerg systemd[1]: Freezing execution.

Impact:
Systemd does not provide service anymore.

Workaround:
Reboot the system to restore the systemd services.


1019261-1 : In-TMM HTTPS monitor with SSL Profile set to None does not use serverssl profile.

Links to More Info: BT1019261

Component: In-tmm monitors

Symptoms:
HTTPS monitors with SSL profile set to None (default) will not use the default ServerSSL profile of "serverssl" when In-TMM monitoring is enabled. Instead, another internal ServerSSL profile is used which has different values from "serverssl".

Conditions:
-- In-TMM monitoring is enabled
-- HTTPS monitor(s) with SSL profile field is set to the default of "None"

Impact:
The TLS settings for the HTTPS monitor monitor probes will not match those of the ServerSSL "serverssl" profile and may cause unexpected behavior such as utilizing TLS 1.3 (disabled by default in the "serverssl" profile) or random session IDs.

Workaround:
Specify a ServerSSL profile in every HTTPS monitor when using In-TMM monitoring.

Attaching the profile "serverssl" will result in the same behavior that SSL Profile "none" should provide, given that the "serverssl" profile should be the default.


1019129-4 : Changing syslog remote port requires syslog-ng restart to take effect

Links to More Info: BT1019129

Component: TMOS

Symptoms:
Modified remote port in syslog configuration takes effect only after restart of the syslog-ng.

Conditions:
-- Configure the remote syslogs and allow some time to pass.
-- Change the local IP or remote port in syslog config.

Impact:
Change does not occur until you reboot or restart syslog-ng.

Workaround:
To cause the change to occur, restart syslog-ng:
bigstart restart syslog-ng


1018877-2 : Subsession variable values mixing between sessions

Links to More Info: BT1018877

Component: Access Policy Manager

Symptoms:
Subsession variable lookup internally assumes that a complete session DB lookup name (Session ID + Subsession key) is used. However, when using the lookup table, only the subsession key is passed in.

Conditions:
Subsession variables are referenced in the Per-Request Policy outside of the Subsession without the Session ID.

Impact:
A Per-Request Policy execution may get the value of the subsession variable from a different APM session.

Workaround:
Add the session ID to the reference to the subsession variables used in Per-Request Policies.


1018765-1 : Changing the sshd port breaks some BIG-IP utilities on a multi-bladed system

Links to More Info: BT1018765

Component: Local Traffic Manager

Symptoms:
After using "sys sshd port" to change the default port for sshd, some utilities may no longer work properly on the BIG-IP, such as:

"tmsh reboot slot ..."

or

qkview

or

any command using clsh

or

ssh slot<slot number>

Conditions:
-- Chassis system with multiple blades.
-- Default sshd port was modified.

Impact:
Unable to run commands on secondary blades.

Workaround:
-- Reconfigure SSHD to run on the default port, 22.

or

-- Specify an explicit port when using ssh and log in to each blade to run the desired commands, e.g. "ssh -p 40222 slot2"


1018673-1 : Virtual Edition systems replicate host traffic to all TMMs when a multicast MAC address is the traffic's nexthop

Links to More Info: BT1018673

Component: TMOS

Symptoms:
When BIG-IP Virtual Edition receives a host packet that has a multicast MAC address as its nexthop, it will disaggregate this by forwarding it to all TMMs. This results in all TMMs egressing the packet.

Conditions:
-- BIG-IP Virtual Edition
-- A route is configured to a multicast MAC address
-- Host traffic (e.g. non-TMM monitors, ping, etc.) is routed to the multicast MAC address

Impact:
Extraneous packets are egressed from the BIG-IP.

Workaround:
Partial workaround for the case of monitors: use in-TMM monitors where possible. Otherwise, there is no workaround for this.


1018165-1 : GUI display of DHCPv6 profile not correct for virtual server in non-default route-domain

Links to More Info: BT1018165

Component: TMOS

Symptoms:
A virtual server created in a non-default route-domain with a DHCPv6 profile shows as using a DHCPv4 profile 'None' in the GUI.

Conditions:
-- Virtual server using a DHCPv6 profile.
-- Virtual server must be in a non-default route-domain.
-- Using the GUI to view the virtual server.

Impact:
Incorrect view of the configuration.

Workaround:
None


1017897-1 : Self IP address creation fails with 'ioctl failed: No such device'

Links to More Info: BT1017897

Component: TMOS

Symptoms:
Creating a self IP address after a route-domain using TMSH reports an error:

01070712:3: Cannot get device index for Backend in rd2 - ioctl failed: No such device.

Conditions:
Using tmsh, create a Trunk, create a VLAN on the trunk, create a route-domain, then create a self IP address.

Impact:
Self IP address creation fails after route-domain creation.
Unable to run declarative-onboarding declaration.

Workaround:
Add a short delay after modifying/creating the route domain before creating the self IP address.

Note: Self IP address should be created after route-domain creation.


1017885-5 : Wildcard server-name does not match multiple labels in FQDN

Links to More Info: BT1017885

Component: Local Traffic Manager

Symptoms:
Wildcard server-name does not match multiple labels in FQDN
for example: *.domain.com matches a.domain.com or a.bc.domain.com, but it does not match domain.com but here multiple labels(a.bc.domain.com) are not matched to the wildcard (*.domain.com).

Conditions:
Client-ssl is configured with a wildcard server-name with the virtual server configured with multiple client-ssl profiles. The correct ssl profile (and therefore certificate) is chosen based on SNI from the client Hello.

Impact:
Generates default profile/certificate when trying to match with multiple labels using wildcard, when it should generate correct certificate matched to the wildcard in server name.

Workaround:
Add additional SAN values to the certificate with the relevant second-level domain elements, for example:

When serving "site.test.example.com" using a certificate that matches just *.example.com, add a second SAN element to the certificate of *.test.example.com


1017857-1 : Restore of UCS leads to incorrect UID on authorized_keys

Links to More Info: BT1017857

Component: TMOS

Symptoms:
After restoring a UCS from a different BIG-IP device, the admin user is unable to log in via SSH using SSH public key authentication.

Conditions:
-- Create a UCS on one BIG-IP system where a UCS archive has been restored in the past (including by an upgrade)
-- Import the UCS to a different BIG-IP system and load it

Impact:
You are unable to log in as the admin user via SSH using key-based authentication.
NOTE: Password authentication works without any issues.

Workaround:
Change the owner of /home/admin/.ssh/authorized_keys to 'root', by running the following command:

    chown root /home/admin/.ssh/authorized_keys

This command can also be run via iControl REST using the /mgmt/tm/util/bash endpoint.


1017801-1 : Internal listeners (cgc, ftp data, etc) all share the same listener_key stats

Links to More Info: BT1017801

Component: Local Traffic Manager

Symptoms:
Internal stats are not accurate because they are shared across multiple listener types

Conditions:
This can occur when multiple virtual server types are in use and passing traffic.

Impact:
Internal listener stats are not accurate.


1017557-1 : ASM Plugin Abort reset for chunked response without proper terminating 0 chunk followed by FIN

Links to More Info: BT1017557

Component: Application Security Manager

Symptoms:
ASM BD sends a reset back to the client when the backend server sends a response without proper terminating 0 chunk followed by FIN.

Conditions:
- ASM provisioned
- ASM policy attached to a virtual server
- Backed server sends a bad chunked response

Impact:
Valid requests can be reset.

Workaround:
Any one of the following workarounds can be applied.

-- Fix backed server behavior.
-- Fix bad response using iRule, appending proper terminating 0 chunk
-- Change ASM internal /usr/share/ts/bin/add_del_internal update bypass_upon_load 1


1017421-4 : SASP Monitor does not log significant error conditions at default logging level

Links to More Info: BT1017421

Component: Local Traffic Manager

Symptoms:
Most error conditions encountered by the SASP monitor are not logged at the default logging level ("error"). Most of the meaningful error conditions, including Exceptions, are logged at "info" or "debug" levels. Obtaining details to diagnose the SASP monitor issues requires reconfiguring sys db saspd.loglevel for a value of "info" or "debug".

Conditions:
-- Using the SASP monitor to monitor LTM pool members
-- Leaving the saspd.loglevel system DB variable configured at the default value of "error"

Impact:
Errors which occur intermittently or once while monitoring LTM pool members using the SASP monitor may not be diagnosable.

Workaround:
Configure the saspd.loglevel system DB variable with a value of "info" (for normal operations) or "debug" (if problems are occurring repeatedly).


1017261-7 : Configuraton update triggers from MCP to ASM are ignored

Links to More Info: BT1017261

Component: Application Security Manager

Symptoms:
If a stale/incorrect but running PID is present in /var/ts/var/install/ucs_install.pid, then ASMConfig will think it is in the middle of a UCS or Sync load event and ignore updates from MCP.

Conditions:
A UCS load event such as an upgrade or a config sync is interrupted and ASM is not restarted until another process reuses the process id from the upgrade.

Impact:
Updates from MCP are ignored which can cause:
* Missed sync events
* Missed updates for logging or pool configuration
* Missing security policies

Workaround:
Delete /var/ts/var/install/ucs_install.pid


1017149-1 : User-defined bot sigs that are created in tmsh don't overlap staged factory bot sigs

Component: Application Security Manager

Symptoms:
User-defined bot signatures that are created in tmsh are not enforced if there are similar factory bot signatures even when they are staged.

Conditions:
User-defined bot signature is created in tmsh and is matched also by staged factory bot signature.

Impact:
User-defined signature is not enforced correctly

Workaround:
Define user-defined bot signature using the GUI and if signature domain are needed but can't be configured by the GUI, define the domain in tmsh after the signature is created with:
tmsh mod security bot-defense signature <sig_name> domains replace-all-with { domains }


1017029-5 : SASP monitor does not identify specific cause of failed SASP Registration attempt

Links to More Info: BT1017029

Component: Local Traffic Manager

Symptoms:
On affected BIG-IP versions, upon startup, the SASP monitor sends a single Registration Request to the SASP GWM (Group Workload Manager) to initiate monitoring of configured LTM pool members. This Registration Request contains all configured LTM pools (SASP Groups) and members (SASP Group Members).

If an error is encountered by the SASP GWM with one of the SASP Groups in the request, the registration of all groups fails.
However, the GWM does not provide any indication of *which* Group or member does not match the GWM configuration, hindering troubleshooting efforts.

The current BIG-IP behavior does not allow identification of the specific pool/member or monitor that is misconfigured and thus responsible for the failed SASP Registration attempt.

Conditions:
This behavior occurs on affected BIG-IP versions when the LTM SASP monitor is configured to monitor members of multiple LTM pools, and when BIG-IP start/restarts/reboots or the configuration is loaded.

Impact:
If a single Registration Request fails, the GWM terminates the connection with the Load Balancer (BIG-IP SASP monitor). This behavior is defined by the SASP protocol and SASP GWM implementation.

As a result, the SASP monitor will mark all pool members DOWN that are monitored by the SASP monitor, halting traffic from flowing to all pools monitored by the SASP monitor.

When an error occurs during registration of the LTM pools (SASP Groups), the GWM does not provide any indication of *which* Group or member does not match the GWM configuration.
Since a single error message is returned by the SASP GWM for the entire Registration Request (for all SASP Groups), the SASP monitor cannot indicate which Group (pool/member) or monitor caused the error.

This hinders efforts to troubleshoot the cause of the failure, while all traffic has stopped flowing to the SASP-monitored pools.

Workaround:
To diagnose this issue, first enable saspd debug logging:
tmsh mod sys db saspd.loglevel value debug_msg
(Optional alternative values include deep_debug and debug, but provide less detail.)

With saspd debug logging enabled, a message like the following in /var/log/monitors/saspd.log confirms that an error occurred during the Registration step:
SASPProcessor::processRegistrationReply: received error registering workloads with GWM ##.##.##.###:3860: 69 'InvalidGroup'

If the above message is found to confirm this issue, the primary path to resolution should be for the BIG-IP administrator to very carefully compare the BIG-IP pool/member and sasp monitor configuration with the SASP GWM configuration, to identify any mismatches or inconsistencies between the configurations.

On the BIG-IP system, to help isolate the misconfigured LTM pool(s)/member(s) causing the SASP Registration failure:
1. Remove the sasp monitor from configured LTM pools/members one at a time, and observe whether any pool members still monitored by the sasp monitor are marked UP.
2. Add the sasp monitor back to configured LTM pools/members one at a time, in the same order as removed, except for the last LTM pool/member from which it was removed.
3. Save and reload the configuration, and check whether the LTM pools/members monitored by the sasp monitor are still marked UP.
4. Repeat as necessary if there appear to be multiple LTM pools/members causing a SASP Registration failure.


Alternately, it may be possible to choose a different monitor (using a more fault-tolerant protocol) to monitor the status of affected pool members.


1016921-3 : SSL Connection mirroring - session resumption does not occur on standby when the session ticket is enabled

Links to More Info: BT1016921

Component: Local Traffic Manager

Symptoms:
Eight-second delays occur on traffic through an SSL connection mirroring virtual server, and errors occur on the standby device:

crit tmm7[11598]: 01010025:2: Device error: crypto codec Couldn't create an OpenSSL EC group object OpenSSL error:0906D06C:PEM
err tmm7[11598]: 01010282:3: Crypto codec error: sw_crypto-7 Couldn't initialize the elliptic curve parameters.
crit tmm7[11598]: 01010025:2: Device error: crypto codec No codec available to initialize request context.

Conditions:
All of these conditions:
-- SSL connection mirroring enabled
-- Session tickets are enabled
-- High availability (HA) environment

and one of the following:
-- Running BIG-IP v14.1.4.1 or above (in the v14.1.x branch)
or
-- Engineering hotfix applied to v14.x/v15.x that has the ID760406 fix (see https://cdn.f5.com/product/bugtracker/ID760406.html)

Impact:
SSL traffic is significantly delayed and errors are thrown on the standby device.

Workaround:
Any one of the following could prevent the problem.

-- client-ssl profile cache-size 0.
-- client-ssl profile session-ticket disabled (default).
-- disable SSL connection mirror on virtual server.


1016909-1 : BIG-IP iRule commands FLOW::this or FLOW::peer can create zombie flows.

Links to More Info: BT1016909

Component: Local Traffic Manager

Symptoms:
Keeping a variable reference to FLOW::this or FLOW::peer in iRules can result in zombie connection flows that are never removed.

TMM memory use for 'connflow' and 'tclrule_pcb' are high, and do not match the number of current connections reported by the system.

Conditions:
-- iRule that uses FLOW::this or FLOW::peer, and stores the result of one of those commands into a variable.

Impact:
Increased memory use in TMM, which can eventually result in a TMM crash or traffic disruption while connections are removed using the connection sweeper.

Workaround:
Do not retain the result of 'FLOW::this' or 'FLOW::peer' in a variable in an iRule. Instead, either:

1. Use the variable directly, i.e.:
    log local0.warning: "The flow is [FLOW::this]"

2. Unset the variable when done, i.e.:
    set flow [FLOW::this]
    log local0.warning: "The flow is $flow"
    unset flow


If a system is already affected by this issue, the only way to free that memory is to restart TMM.


1016589-1 : Incorrect expression in STREAM::expression might cause a tmm crash

Links to More Info: BT1016589

Component: Local Traffic Manager

Symptoms:
Tmm restarts and generates a core file

Conditions:
An iRule uses STREAM::expression that contains certain strings or is malformed.

Stream expressions use a string representing a series of search/replace or search components. If there is more than one search-only component, this might cause tmm to crash.

The delimiter character used is the first character of each component search/replace pair. This example uses the '@' character as the delimiter, but it is malformed.

Given
  STREAM::expression "@dog@dot@cat@car@uvw@xyz@"
This would be interpreted as three items:
  search for "dog" replace with "dot"
  search for "at@"
  search for "r@uvw@xyz@"

This string should likely be:
  STREAM::expression "@dog@dot@@cat@car@@uvw@xyz@"
Which would be interpreted as
  search for "dog" replace with "dot"
  search for "cat" replace with "car"
  search for "uvw" replace with "xyz"

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Ensure that strings in STREAM::expression iRule statements do not have more than one search-only component and are well formed.


1016481-1 : Special JSON characters in Dom Signatures breaks configuration

Links to More Info: BT1016481

Component: Fraud Protection Services

Symptoms:
FPS modules malfunction.

Conditions:
Unescaped special JSON characters used in Dom Signatures.

Impact:
FPS client-side JS unable to load configuration JSON.

Workaround:
Manually escape all special JSON characters in Dom Signatures.


1016433-2 : URI rewriting is incorrect for "data:" and "javascript:"

Links to More Info: BT1016433

Component: Local Traffic Manager

Symptoms:
In case of LTM rewrite, HTML content having attribute values like "javascript:", "mailto:", "data:" etc are incorrectly rewritten as URI. This can cause web applications to fail.

Conditions:
-- LTM rewrite profile in URI translation mode.
-- HTML contents of web application contains attribute values like "javascript:abc", "data:" etc.

Impact:
Incorrect URI rewriting may cause web application to fail.


1016045-4 : OOPS logging may appear while active ftp if the port command forces a cmp_redirection and a quit follows.

Links to More Info: BT1016045

Component: Local Traffic Manager

Symptoms:
OOPS logging may appear in /var/log/ltm and /var/log/tmm

Conditions:
1. Active ftp connection.
2. Sending the port command immediately followed by a quit.

Impact:
Log pollution and potential for performance degradation.

Workaround:
N/A


1015817-1 : Flows rejected due to no return route do not increment rejection stats

Links to More Info: BT1015817

Component: Local Traffic Manager

Symptoms:
When flows are rejected due to no return route being present, the BIG-IP does not increment the appropriate statistics to indicated this.

Conditions:
Flows are rejected due to no return route.

Impact:
There is no indication of the real problem when viewing the statistics.


1015793-1 : Length value returned by TCP::payload is signed and can appear negative

Links to More Info: BT1015793

Component: Local Traffic Manager

Symptoms:
When an iRule uses TCP::collect, if the amount of received data being buffered exceeds 2147483647 octets, the value returned from [TCP::payload length] will appear as a negative integer.

Conditions:
An iRule has been written to use TCP::collect with a very high-volume input stream.

Impact:
The unanticipated negative value may confuse the iRule's logic, with unpredictable effects. In extreme cases, a disruption of the TMM could occur.

Workaround:
Convert the result of "TCL::payload length" to an unsigned integer before using it, e.g.:

    set curlen [expr { 0xffffffff & [TCP::payload length] }]

Note: the amount of accumulated payload still must not exceed 4,294,967,295 bytes (2^32-1).


1015501-3 : Changes to DHCP Profile are not used by tmm

Links to More Info: BT1015501

Component: Policy Enforcement Manager

Symptoms:
After changing the authentication settings of a DHCP profile, the old authentication settings are still used.

Conditions:
Modify ltm profile dhcpv4 Discovery_DHCPv4_profile authentication { enabled true virtual RadiusAAA }

Impact:
New connections use existing listeners.

Workaround:
Restart tmm.

Impact of workaround: traffic disrupted while tmm restarts.


1015453-1 : Under some circumstances, the "Local Traffic" menu in System -> Configuration is inaccessible in the GUI

Links to More Info: BT1015453

Component: TMOS

Symptoms:
The "Local Traffic" menu in System -> Configuration is inaccessible in the GUI.

Conditions:
-- LTM is licensed but not provisioned.
-- AFM, DNS, and DoS are not provisioned.
-- Other modules (such as APM) are provisioned

Impact:
Unable to configure SYN cookies.

Workaround:
Use TMSH to configure SYN cookies.


1015117-5 : Headers are corrupted during modification/insertion if a mix of end-of-line markers <CRLF> and <LF> are used

Links to More Info: BT1015117

Component: Local Traffic Manager

Symptoms:
HTTP header corruption occurs after insertion/modification using an iRule in HTTP Headers which contain mixed end-of-line markers <CRLF> and <LF>.

Conditions:
- HTTP virtual server
- An iRule, policy or profile inserts an HTTP Request header - Such as x-forwarded-for
- An HTTP request contains some lines that end with <CRLF> and some that end with <LF>

Impact:
Inserted headers get concatenated in such a way that the HTTP request header gets corrupted.

Workaround:
Use HTTP headers with proper end-of-line markers in compliance with HTTP RFC


1015093-1 : The "iq" column is missing from the ndal_tx_stats table

Links to More Info: BT1015093

Component: TMOS

Symptoms:
When viewing the ndal_tx_stats statistics table, the "iq" column is not present.

Conditions:
-- BIG-IP Virtual Edition.
-- Viewing statistics tables.

Impact:
Missing statistic; less information available.


1014761-2 : [DNS][GUI] Not able to enable/disable pool member from pool member property page

Links to More Info: BT1014761

Component: Global Traffic Manager (DNS)

Symptoms:
You are unable to enable/disable DNS pool members from the pool member property page.

Conditions:
Making changes via the DNS pool member property page.

Impact:
You can submit the changes but the changes do not persist.

Workaround:
1. tmsh
or
2. enable/disable pool member from list of pool members instead of 'general properties' page


1014633-4 : Transparent / gateway monitors may fail if there is no route to a node

Links to More Info: BT1014633

Component: Local Traffic Manager

Symptoms:
Transparent or gateway monitors may fail.

Conditions:
-- Transparent or gateway monitor configured.
-- Route does not exist to destination.

Impact:
The monitor fails and the node / pool member is marked unavailable.

Workaround:
Add a route to the destination.


1014361-2 : Config sync fails after provisioning APM or changing BIG-IP license

Links to More Info: BT1014361

Component: TMOS

Symptoms:
Clustered high availability (HA) devices cannot establish ConfigSync connection, and the prompt status reports disconnected.

MCPD is logging a message similar to this repeatedly, even though all TMMs are up and running:

err mcpd[4247]: 0107142f:3: Can't connect to CMI peer 192.0.2.1, TMM outbound listener not yet created

Conditions:
This can occur under either of the following conditions:

-- Some provisioning operations (i.e. provisioning APM), when TMM restarts during the provisioning. This has primarily been seen with BIG-IP instances running in Google Cloud.

-- Changing the license of a BIG-IP VE when the new license changes the number of TMM instances that will run on the BIG-IP (i.e. upgrading from a 1Gbps to 3Gbps VE license)

Impact:
BIG-IP devices are not able to perform ConfigSync operations.

Workaround:
Restart MCPD on the affected system.

Note: This will disrupt traffic while system services restart.


1014285-5 : Set auto-failback-enabled moved to false after upgrade

Links to More Info: BT1014285

Component: TMOS

Symptoms:
In a traffic group, auto-failback-enabled is changed from true to false after config save and upgrade.

During the upgrade, the following log can be observed:

info: Warning: Invalid configuration - Traffic Group has high availability (HA) Group "test_HA_Group" assigned and auto-failback-enabled set to true. Resetting auto-failback-enabled to false.

Conditions:
-- auto-failback-enabled is set to true and high availability (HA) groups are configured and assigned to traffic-group
-- The device is upgraded.

Impact:
Auto-failback-enabled is set from true to false and auto failback is disabled.

Workaround:
After upgrade, set the auto-failback-enabled to true.


1013937-1 : In-TMM HTTP and HTTPS monitors require RFC-compliant send strings to work.

Links to More Info: BT1013937

Component: Local Traffic Manager

Symptoms:
Pool members that should be marked UP are incorrectly marked DOWN. No monitor traffic is seen on the wire.

If pool member monitor logging is enabled, an entry similar to the following example can be seen in the logs:

[0][1399] 2021-02-11 11:11:34.709360: ID 44 :TMM::handle_message(TMA_Message<tma_msg_args_notify>*): tmm monitor failed to connect [ tmm?=true td=true tr=false tmm_mid=0:1 addr=::ffff:192.168.10.100:80 srcaddr=none ]

If tma debug logging is enabled, an entry similar to the following example can be seen in the logs:

Feb 11 11:12:14 bigip1.local debug tmm[2259]: 01ad0019:7: Monitor Agent TMM 0: received probe response: MID 1, reason TMA_RESULT_FAIL(Probe response lost due to transient failure), info 0

Conditions:
- In-tmm monitoring is enabled (the bigd.tmm db key is set to enable).

- A HTTP or HTTPS monitor has been configured with a send string which is not RFC-compliant. For instance, the following string incorrectly includes a space before the Host header:

"GET / HTTP/1.1\r\n Host: example.com\r\nConnection: Close\r\n\r\n"

Impact:
Pool member monitoring is impacted and unreliable.

Workaround:
Ensure that you specify a send string which is fully RFC-compliant (for instance, in the example above, remove the space before the Host header).


1013777-4 : An error is encountered when enabling reset-learning to all the signatures of a protocol inspection profile in the GUI.

Links to More Info: BT1013777

Component: Protocol Inspection

Symptoms:
An error is displayed in the GUI when reset-learning is applied to all the signatures of a protocol inspection profile in the GUI.

The actual error is “414 Request-URI Too Long” because the HTTP request URI length generated in this case exceeds the system limit.

Conditions:
-- "Reset-learning" action is applied to all signatures and compliances of a protocol inspection profile.
-- Once a certain number of signatures are selected, The GUI throws a “414 Request-URI Too Long” error.

Impact:
- Bulk "reset-learning" action can't be applied from the GUI when the "414 Request-URI Too Long" is returned.

Workaround:
- The TMSH command "delete security protocol-inspection learning-stats <profile-name>" can be used to apply reset-learning to all the signatures of a protocol inspection profile.


1013729-2 : Changing User login password using VMware View Horizon client results in “HTTP error 500”

Links to More Info: BT1013729

Component: Access Policy Manager

Symptoms:
“HTTP error 500" is shown when user changes the password using VMware view horizon client.

Conditions:
User tries to change user password using the VMware native client.

Impact:
Users can't login to the VMware VDI.

Workaround:
None


1013597-2 : `HTTP2::disable serverside` can reset flows

Links to More Info: BT1013597

Component: Local Traffic Manager

Symptoms:
If `HTTP2::disable serverside` is called on a flow that has no HTTP2 configured on the server-side then it can incorrectly report an error and RST the flow.

Conditions:
1) iRule calls `HTTP2::disable serverside` on HTTP_REQUEST.
2) No HTTP2 configured on server-side.
3) server-side has already handled a flow.

Impact:
Traffic interruption, potential for a core (see ID1012533). Traffic disrupted while tmm restarts.

Workaround:
Don't call `HTTP2::disable serverside` if there is no HTTP2 on server-side.


1013353-1 : ICMP flood or ICMP/IP/IPv6 fragment vectors are not hardware mitigated when configured on VS

Links to More Info: BT1013353

Component: Advanced Firewall Manager

Symptoms:
Hardware drops are not seen for the vectors ICMP flood or ICMP/IP/IPv6 fragment.

Conditions:
In the case of a VS configured with ICMP flood or ICMP/IP/IPv6 fragment vectors, will see only attack mitigation and drops at the software level.

Impact:
Hardware mitigation is not happening when ICMP flood and ICMP/IP/IPv6 fragment vectors are configured on a VS.

Workaround:
None


1013209-5 : BIG-IP components relying on ca-bundle.crt may stop working after upgrade

Links to More Info: BT1013209

Component: Local Traffic Manager

Symptoms:
After upgrading, the BIG-IP system components may stop working due to missing CA certificates in ca-bundle.crt.

Conditions:
CA cert which is expired/will expire in 6 months (or 182 days) after upgrade is removed from ca-bundle.crt.

Impact:
The BIG-IP components such as TMM, APM etc. may stop working due to missing CA certificates in ca-bundle.crt.

Workaround:
Download the blended-bundle.crt from the F5 download site. It is located at
https://downloads.f5.com/esd/product.jsp?sw=Certificate-Authority-Bundle&pro=Certificate-Authority-Bundle


1012813-1 : Statsd can deadlock with rrdshim with the error that a stats file "is not an RRD file"

Links to More Info: BT1012813

Component: Local Traffic Manager

Symptoms:
-- RRD graphs are not updated.
-- System statistics are stale.
-- Commands such as 'tmsh show sys memory' may not complete.
-- qkview does not complete, as it runs "tmsh show sys memory'.

You may see errors similar to:

-- err statsd[4908]: 011b0600:3: Error ''/var/rrd/access' is not an RRD file' during rrd_update for rrd file '/var/rrd/access'.
-- err statsd[5005]: 011b0600:3: Error '-1' during rrd_update for rrd file '/var/rrd/access'.

Conditions:
Corruption of a binary file in /var/rrd.

Impact:
Stats are no longer collected. Statsd and rrdshim deadlock, resulting in the issues noted in the Symptoms section.

Workaround:
Remove the corrupted file and restart statsd:
bigstart restart statsd


1012601-4 : Alarm LED and LCD alert cleared prematurely on startup for missing PSU input

Links to More Info: BT1012601

Component: TMOS

Symptoms:
Occasionally when starting up a BIG-IP system, if one PSU is connected but not supplying power, the corresponding amber alarm LED and "PSU status input lost" alert in the LCD menu can be incorrectly cleared after selecting System -> Power On from the LCD menu.

Conditions:
-- iSeries platforms
-- The BIG-IP device is powered on with one PSU connected and not supplying power

Impact:
The alarm LED is incorrectly turned off, and navigating to alerts on the LCD menu no longer shows a "PSU status input lost" alert after powering on.

Workaround:
Before powering on the BIG-IP device, check the alarm LED and navigate to alerts on the LCD screen. If there is a "PSU status input lost" alert, the corresponding power LED should be amber.

If the power LED is still amber after powering the system on but the alarm LED and LCD alert are cleared, please disregard the alarm LED and LCD in this case. The amber power LED is correct, and the PSU is still not supplying power.

Additionally, if you are logged into the console, running "bigstart restart chmand" will force a new "PSU status input lost" alert to be generated on the LCD and should also correct the alarm LED color to amber.


1012493-5 : Systemauth.primaryadminuser set to anything but 'admin' causes internal error for mcp-state check

Links to More Info: BT1012493

Component: TMOS

Symptoms:
When polling the endpoint /mgmt/tm/sys/mcp-state you get an error:

{
  "code": 500,
  "message": "MCP Session terminated",
  "errorStack": [],
  "apiError": 32768003
}

Conditions:
-- A user other than 'admin' polls /mgmt/tm/sys/mcp-state

Impact:
An error is returned for users that are not the admin user. Systems which are subject to special security rules that require disabling the admin user may lose functionality in iControl/REST.

Workaround:
You can use either of these workarounds:

-- Make the API call as user "admin"
-- Use tmsh
   tmsh show sys mcp-state


1012449-1 : Unable to edit custom inband monitor in the GUI

Links to More Info: BT1012449

Component: TMOS

Symptoms:
Attempting to edit a custom inband monitor in the GUI results in an error:

An error has occurred while trying to process your request.

Conditions:
Editing a custom inband monitor in the GUI.

Impact:
Unable to make changes to inband monitors in the GUI.

Workaround:
Use TMSH to modify the monitor, for example:

tmsh modify ltm monitor inband <monitor name> ...


1012413-1 : Tmm performance impact for DDoS vector on virtual server when hardware mitigation is enabled

Links to More Info: BT1012413

Component: Advanced Firewall Manager

Symptoms:
When a DoS profile is attached to a virtual server, the mitigation limit is set to the system limit and not the HSB limit. This causes more packets to be handled by software. Depending on attack size, it could pass up to 200% of the set mitigation limit. This can impact tmm performance.

Conditions:
-- Dos profile is configured on virtual server.
-- Hardware platform that has HSB
-- Hardware mitigation is enabled

Impact:
Tmm performance may be degraded.

Workaround:
None


1012061-1 : Link Controller auto-discovery does not remove deleted virtual servers

Links to More Info: BT1012061

Component: Global Traffic Manager (DNS)

Symptoms:
Removed virtual servers are still displayed as available in link controller configuration.

Conditions:
1. GTM server representing Link Controller is configured for high availability (HA)
2. There is no working iQuery session with one of the units

Impact:
Virtual servers linger in bigip_gtm.conf configuration after they are deleted.

Workaround:
Make sure that there is at least one working iQuery channel with all devices configured under GTM server object.


1012049-1 : Incorrect virtual server list returned in response to status request

Links to More Info: BT1012049

Component: TMOS

Symptoms:
Returned list of virtual servers shows all virtual servers rather than no servers, or a specific list of servers.

Conditions:
-- Navigate through the GUI to Local Traffic :: Virtual Servers : Virtual Server List page.
-- Click the 'Status' drop down and select a status that returns no virtual servers or a specific subset of the virtual servers.
-- Modify the resulting request to insert ' --' url-encoded.

Impact:
The returned list shows all virtual servers instead of the ones specifically queried.

Workaround:
None


1012009-3 : MQTT Message Routing virtual may result in TMM crash

Links to More Info: BT1012009

Component: Local Traffic Manager

Symptoms:
The BIG-IP system provides an option to use Message Routing virtual servers for MQTT traffic. It uses a different approach to associate a client side and a server side than a standard virtual server. In some instances, a server side is incorrectly handled.

Conditions:
-- A Message Routing virtual with MQTT protocol.
-- A client attempts to reconnect.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1011889-6 : The BIG-IP system does not handle DHCPv6 fragmented traffic properly

Links to More Info: BT1011889

Component: Local Traffic Manager

Symptoms:
In the following two scenarios, packets may get dropped by the BIG-IP device.

- [client MTU 1500]<--->(vlan1)<--->[MTU 1500BIG-IP MTU 9000]<--->(vlan2)<--->[MTU 1500server]
If the response from the server is large enough to be fragmented, the BIG-IP system is not able to process the packets.

- [client MTU 1500]<--->(vlan1)<--->[MTU 1500BIG-IP MTU 9000]<--->(vlan2)<--->[MTU 9000server]
Large response coming in a single packet is not fragmented properly on the client-side, then packets may be dropped.

Conditions:
DHCPv6 MTU size is greater than or equal to 1500.

Impact:
Packets are dropped, traffic is disrupted.


1011265-3 : Failover script cannot read /config/partitions/ after upgrade

Links to More Info: BT1011265

Component: TMOS

Symptoms:
After upgrading, failover does not work correctly. An error is encountered in /var/log/audit/log:

type=AVC msg=audit(1617263442.711:206): avc: denied { read } for pid=17187 comm="active" name="partitions" dev="dm-11" ino=259 scontext=system_u:system_r:f5config_failover_t:s0 tcontext=system_u:object_r:f5config_t:s0 tclass=dir

Conditions:
-- High availability (HA) environment configured
-- Devices are upgraded to version 14.1.4
-- A failover occurs

Impact:
Failover does not complete. Floating IP addresses do not move to the active device.

Workaround:
Tmsh modify sys db failover.selinuxallowscripts enable


1011133 : Protocol Inspection compliance check 10208 gtp_disallowed_message_types does not take GTP version into account

Links to More Info: BT1011133

Component: Protocol Inspection

Symptoms:
GTP version 1 and GTP version 2 disagree on message type designations, so blocking a given message type has a different meaning depending on the GTP version.

Conditions:
Compliance check 10208 is configured in an environment where different versions of GTP traffic might be encountered.

Impact:
The device might drop GTP message types that are not intended to be dropped.

Workaround:
If the environment supports/expects only GTP version 1 or version 2 traffic, use compliance check 10223 gtp_disallowed_version to exclude all traffic from the unexpected GTP type to eliminate the message type ambiguity.


1011081-3 : Connection lost to the Postgres client during the BIG-IP bootup process

Links to More Info: BT1011081

Component: TMOS

Symptoms:
During the boot process of BIG-IP, mcpd loses the connection to the Postgres with FATAL error with a "Broken Pipe" error.

Conditions:
-- BIG-IP devices are configured in high availability (HA).
-- BIG-IP configuration has the keys configured in Postgres Database.

Impact:
Mcpd loses the connection to the Postgres with FATAL error with a "Broken Pipe" error


1010961-1 : Redirect fails when accessing SAML Resource more than once in SAML IDP initiated Flow

Links to More Info: BT1010961

Component: Access Policy Manager

Symptoms:
In SAML idp initiated Flow, redirects fails on accessing SAML Resource second time as multiple assertions are posted to the SP on same access session

Conditions:
1. BIG-IP SAML SP and IDP configured for IDP initiated Flow
2. Access SAML Resource first time is successful but fails second time for same access session

Impact:
Multiple assertions are sent to SP on same access session and fails to render the backend application second time.

Workaround:
For Access policy contains an allow ending:

when HTTP_REQUEST {
    if { [HTTP::uri] eq "/saml/sp/profile/post/acs" && [ACCESS::session exists -state_allow -sid [ACCESS::session sid]] } {
        HTTP::redirect "/"
    }
}

For access policy contains a redirect ending:
when HTTP_REQUEST {
    if { [HTTP::uri] eq "/saml/sp/profile/post/acs" && [ACCESS::session exists -state_redirect -sid [ACCESS::session sid]] } {
        HTTP::redirect "/"
    }
}

If relay-state implemented, edit the iRule's redirect uri to match that configured in the relay-state.


1010809-3 : Connection is reset when sending a HTTP HEAD request to APM Virtual Server

Links to More Info: BT1010809

Component: Access Policy Manager

Symptoms:
Connection is reset when sending a HTTP HEAD request to APM Virtual Server

Conditions:
-- A virtual server with APM implemented
-- A HTTP HEAD request is sent to the virtual server

Impact:
Connection is reset

Workaround:
To work around this issue, implement the following iRule on the virtual server:

when HTTP_REQUEST priority 500 {
    if {[HTTP::method] equals "HEAD"
       && [HTTP::path] equals "/"} {
        HTTP::respond 404
    }
}


1010785-3 : Online help is missing for CRL in client SSL profile and server SSL profile

Links to More Info: BT1010785

Component: TMOS

Symptoms:
Help tab does not show any documentation for CRL in client SSL profile and server SSL profile.

Conditions:
This can be seen in the online help for the client SSL and server SSL profiles.

Impact:
There are no online help instructions to configure CRLs.

Workaround:
None


1010761-3 : Missing TMSH help description for client-ssl profile 'CRL'

Links to More Info: BT1010761

Component: TMOS

Symptoms:
Running the command "tmsh help ltm profile client-ssl" shows that certificate revocation list (CRL) is not present/described.

Conditions:
Run tmsh help ltm profile client-ssl

Impact:
The CRL is not present/described.

Workaround:
None


1010717-1 : Default DoS profile creation from tmsh is incorrectly interpreted by DoS profile GUI

Links to More Info: BT1010717

Component: Anomaly Detection Services

Symptoms:
Creating a DoS profile from tmsh makes the Bados feature appear to be enabled in the GUI, which is incorrect.

Conditions:
Create DoS profile from tmsh, and not from GUI.

Impact:
Inconsistency between the DoS profile and what you see in the GUI.

Workaround:
Disable BADOS in the GUI after creating a DoS profile from tmsh.


1010341-4 : Slower REST calls after update for CVE-2021-22986

Links to More Info: BT1010341

Component: TMOS

Symptoms:
As a result of changes were introduced to increase security around the REST API, REST calls that use HTTP basic authentication may take longer to execute that they did previously.

Conditions:
- REST API calls
- HTTP basic authentication used for the REST calls

Impact:
- Degraded performance of the REST API

Workaround:
Update automation scripting to use token based authentication, which is both faster and more secure than HTTP basic authentication


1010209-1 : BIG-IP configuration allows literal CR and LF characters in LTM monitor send and recv strings

Links to More Info: BT1010209

Component: Local Traffic Manager

Symptoms:
It is possible, using REST or tmsh (vi the 'tmsh edit' command) to embed literal carriage return (CR) or line feed (LF) characters in an mcpd object's parameters, rather than the two-byte sequence \r or \n. This can be done with a monitor send or receive string. When the configuration is loaded, the CR characters are stripped off of the strings, resulting in invalid HTTP in the monitor strings.

Conditions:
-- Using HTTP monitors.
-- Embedding literal CR/LF characters in the monitor's send or receive string.

Impact:
Monitors stop working; pool members being monitored are considered inaccessible.

Workaround:
Do not use embedded unprintable characters in monitor send or receive strings.


1009921-3 : 'SSL::verify_result' iRule command may return incorrect value when combined with dynamic CRL check

Links to More Info: BT1009921

Component: Local Traffic Manager

Symptoms:
'SSL::verify_result' iRule command may return '0' (validation check success) even if the client certificate has already been revoked. The expected return value on a revoked certificate is '23' (certificate revoked).

Conditions:
-- Dynamic CRL check is configured on the client SSL profile.

-- An iRule checks client certificate validity by 'SSL::verify_result' command. Here is example.

  when HTTP_REQUEST {
     set cert [SSL::cert 0]
     set cert_string [X509::verify_cert_error_string [SSL::verify_result]]
     set code [SSL::verify_result]
     if { [SSL::verify_result] == 0 }{
        log local0. "success $cert_string $code" return
     }
     else {
        log local0. "failed $cert_string $code" HTTP::respond 403 content "<html>Invalid client certificate:</html>\n" }
  }

Note: SSL::cert command is in fact the trigger for the behavior as it causes a rebuild of the certificate chain and fetches the status from the cache, which is 0. The reason it is 0 in the cache is that, when dynamic CRLs are used, the system verifies the cert, receives a code 23 (revoked), but the system does not update the SSL session cache with the result.

Impact:
The iRule 'SSL::verify_result' command may return unexpected values. Traffic can be unexpectedly load-balanced to the backend pool member when the end user client requests the virtual server with the revoked certificate.

Workaround:
You can use any of the following workarounds:

-- Remove the SSL::cert command from the iRule (it is not needed in HTTP_REQUEST since the system still has the verify result in runtime code).

-- Set cache-size 0 (zero) on client SSL profiles:
# tmsh modify ltm profile client-ssl [client-ssl profile name] cache-size 0

-- Use authentication frequency 'always' on client SSL profiles:
# tmsh modify ltm profile client-ssl [client-ssl profile name] authenticate always


1009793-2 : Tmm crash when using ipsec

Component: TMOS

Symptoms:
Tmm crashes.

Conditions:
Set sys db variable IPsec.RemoveRedundantSA to enable.
set sys db variable ipsec.removeredundantsa.delay to one.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
Set sys db variable IPsec.RemoveRedundantSA to disable.
set sys db variable ipsec.removeredundantsa.delay to zero.


1009337-2 : LACP trunk down due to bcm56xxd send failure

Links to More Info: BT1009337

Component: TMOS

Symptoms:
Lacp reports trunk(s) down. lacpd reports having trouble writing to bcm56xxd over the unix domain socket /var/run/uds_bcm56xxd.

Conditions:
Not known at this time.

Impact:
An outage was observed.

Workaround:
Restart bcm56xxd, lacpd, and lldpd daemons.


1008233-1 : The gtm_add command fails but reports no error

Links to More Info: BT1008233

Component: Global Traffic Manager (DNS)

Symptoms:
Running the command 'gtm_add' does not add the local GTM to the remote GTM sync group, and it does not display an error message.

Conditions:
The remote GTM has a GTM iRule that references an LTM datagroup that does not exist on the local GTM.

Impact:
The gtm_add command fails silently.

Workaround:
Add the remote LTM datagroup to the local LTM.


1008169-1 : BIG-IP systems disconnect the DIAMETER transport connection if it receives an answer message without a Result-Code AVP

Links to More Info: BT1008169

Component: Service Provider

Symptoms:
If the BIG-IP system receives a DIAMETER answer message without a Result-Code AVP (and/or Experimental-Result-Code AVP), it terminates the connection at the transport (L4) level.

Conditions:
-- Using DIAMETER.
-- Processing an answer message that is missing both Result-Code and Experimental-Result-Code AVPs.

Impact:
The connection is terminated without properly notifying the DIAMETER peer.

Workaround:
None


1007909-1 : Tcpdump with :p (peer flow) flag does not capture forwarded between TMMs

Links to More Info: BT1007909

Component: TMOS

Symptoms:
When using tcpdump with the :p flag, it does not capture all packets that are processed by multiple TMMs.

Conditions:
Traffic flows are handled by multiple TMMs, e.g., one of the following:

-- 'preserve strict' set on virtual servers
-- a CMP-demoted virtual server
-- Service Provider (SP) DAG configured, but using custom mappings for some client IP addresses, or some traffic flows using VLANs without SPDAG configured.

Impact:
Causes confusion since there will be packets missing from tcpdump captures.

Workaround:
Use a packet capture filter to capture clientside and serverside flows directly, without relying on the peer flow flag (":p").


1007869-1 : Upgrade from v14.1.x to v15.1.2.1 or later fails for app-tunnel, RDP and config migration

Links to More Info: BT1007869

Component: Access Policy Manager

Symptoms:
Config load fails with the following error.

01070712:3: Failed: name (/Common/<customization resource name>) Cache path (/config/filestore/files_d/Common_d/customization_group_d/:Common:<customization resource name with revision>) does not exist and there is no copy in trash-bin to restore from.
Unexpected Error: Loading configuration process failed.

An upgraded config may show RDP resources missing from the Advanced resource assign agent:

# tmsh list apm policy agent resource-assign
apm policy agent resource-assign test-simple-ap-01_act_full_resource_assign_ag {
    rules {
        {
            portal-access-resources { /Common/test-pa-01 }
            remote-desktop-resources { /Common/test-rdp-01 } !!! this line may go missing in v15.1.2.1 !!!
            webtop /Common/test-full-wt-01
        }
    }
}

Conditions:
Upgrade to v15.1.2.1 or later with AppTunnel and RDP resources.

Impact:
The configuration fails to load following the upgrade.

Workaround:
Modify the revision numbers resources, customization path for missing webtop links.

Example:
=======

(1) The following AppTunnel config causes config loading failure:

01070712:3: Failed: name (/Common/Example_resource_app_tunnel_customization) Cache path (/config/filestore/files_d/Common_d/customization_group_d/:Common:Example_resource_app_tunnel_customization_1) does not exist and there is no copy in trash-bin to restore from.

(2) Modify as follows:

In TMSH:
#cp /config/filestore/files_d/Common_d/customization_group_d/\:Common\:Example_resource_app_tunnel_customization_1 /config/filestore/files_d/Common_d/customization_group_d/\:Common\:Example_resource_app_tunnel_customization_2

In bigip.conf under customization configuration:
Rename Example_resource_app_tunnel_customization_1 to Example_resource_app_tunnel_customization_2 (modifying revision numbers from _1 to _2)

#tmsh load sys config

(3) For a missing RDP resource: use VPE to edit access profiles and find the appropriate 'Advanced Resource Assign' agents. Add the appropriate RDP resources in the 'Advanced Resource Assign' agent.
==============


1006857-1 : Adding a source address list to a virtual server in a partition with a non-default route domain fails.

Links to More Info: BT1006857

Component: Local Traffic Manager

Symptoms:
Adding a source address list to a virtual server in a partition with a non-default route domain fails with an error similar to:

0107176c:3: Invalid Virtual Address, the IP address 10.10.10.20%2 already exists.

Conditions:
-- A partition with a non-default route domain.
-- A virtual server and address list in said partition.
-- Modifying the virtual server to use the address list as its source address.

Impact:
Unable to use a source address list in a partition with a non-default route domain.

Workaround:
Manually create a traffic-matching-criteria object in TMSH with the desired configuration, and then create the virtual server using that traffic-matching-criteria.

Steps to help with this process can be found in F5 solution article K41752699.


1006509-1 : TMM memory leak

Links to More Info: BT1006509

Component: Access Policy Manager

Symptoms:
After upgrading to 15.1.0.4, tmm memory grows and tmm may restart or the BIG-IP system may reboot.

Conditions:
-- APM provisioned
-- Other conditions are unknown but it linked to single sign-on functionality

Impact:
Tmm memory grows and tmm may restart. Traffic disrupted while tmm restarts.


1006449-1 : The default size of the subagent object cache possibly leading to slow snmp response time

Links to More Info: BT1006449

Component: TMOS

Symptoms:
After upgrading from a 13.1.x release to a later release (such as 15.1.x), BIG-IP CPU utilization increases and SNMP is slow to respond.

Conditions:
SNMP client repeatedly polls BIG-IP for OIDs in multiple tables over a short period of time.

Impact:
SNMP queries take an unusually long time to return data, and BIG-IP CPU utilization is higher.

Workaround:
To the file /config/snmp/bigipTrafficMgmt.conf, add one line with the following content:

  cacheObj 16

This could be accomplished by executing the following command line from bash:

  # echo "cacheObj 16" >> /config/snmp/bigipTrafficMgmt.conf

After the above config file has been modified and saved, the "snmpd" daemon must be restarted, using one of two command variants:

  (on a BIG-IP appliance or VE system)

  # bigstart restart snmpd

  (on a a multi-slot VIPRION or vCMP guest)

  # clsh bigstart restart snmpd

(However, this adjustment will be lost when the BIG-IP software is next upgraded.)


1006345-4 : Static mac entry on trunk is not programmed on CPU-only blades

Links to More Info: BT1006345

Component: TMOS

Symptoms:
More traffic egressing out from primary link of lacp when there is DLFs (destination lookup failures) since static mac is not present on CPU-only blades

Conditions:
Static mac configured on trunk on all platforms except i4000, i850/i2000, 2000/2200, 4000/4200,4100

Impact:
DLFs (destination lookup failures) will cause the first interface in the trunk to egress all DLF'd traffic


1005309-4 : Additional Tcl variables showing information from the AntiBot Mobile SDK

Links to More Info: BT1005309

Component: Application Security Manager

Symptoms:
When using the Bot Defense iRules together with the AntiBot Mobile SDK, there are several variables missing. These missing variables would be useful for correct troubleshooting and pattern matching.

Conditions:
Using the AntiBot Mobile SDK together with Bot Defense iRules

Impact:
Some variables that are required for troubleshooting and pattern matching of the AntiBot Mobile SDK are missing.

Workaround:
None


1005181-4 : Bot Defense Logs indicate the mobile debugger is used even when it is not

Links to More Info: BT1005181

Component: Application Security Manager

Symptoms:
When using the AntiBot Mobile SDK, the Bot Defense Request Log may indicate that the mobile debugger is enabled, even when it is not.

Conditions:
Using the AntiBot Mobile SDK with the Bot Defense Profile

Impact:
Request log is showing an incorrect value.

Workaround:
None


1004953-5 : HTTP does not fall back to HTTP/1.1

Links to More Info: BT1004953

Component: Local Traffic Manager

Symptoms:
After upgrading, the BIG-IP system's HTTP profile no longer falls back to HTTP/1.1 if a client sends a corrupted URI.

Conditions:
-- Client sends a corrupted URI (for example a URI containing a space).

Impact:
The BIG-IP system treats the URI as an HTTP/0.9 request (as per RFC) and forwards only the first request line. In previous releases, the BIG-IP system treated the URI as a HTTP/1.1 request.

Workaround:
None.


1004929-1 : During config sync operation, MCPD restarts on secondary blade logging 01020012:3: A unsigned four-byte integer message item is invalid.

Links to More Info: BT1004929

Component: TMOS

Symptoms:
While receiving a config sync operation, mcpd on a secondary blade may restart, logging:

err mcpd[6383]: 01070734:3: Configuration error: Configuration from primary failed validation: 01020012:3: A unsigned four-byte integer message item is invalid.... failed validation with error 16908306

Conditions:
-- A VIPRION system (or cluster-based vCMP guest) with more than one blade processes a full configuration load, i.e. as a result of running "tmsh load sys config" or receiving a full-load config sync from peer BIG-IP.

-- The system generates a large number of warning messages during a configuration load, whose total length is larger than 65,535 bytes.

These warnings can be seen in the output of "tmsh load sys config" or "tmsh load sys config verify", or are logged under message ID 01071859

An example of such a warning is:

SSLv2 is no longer supported and has been removed. The 'sslv2' keyword in the cipher string of the ssl profile (/Common/ssl-profile-1) has been ignored.

Impact:
MCPD on secondary blades restart. Those blades are inoperative while services restart.

Workaround:
Address the warnings reported by the system.


1004845-1 : Accessing attribute using attributeNode value does not work with Portal Access

Links to More Info: BT1004845

Component: Access Policy Manager

Symptoms:
URI normalization issue when using attributeNode to access attribute values.

Conditions:
Using attributeNode to access attribute value in web applications

Impact:
Web application does not work as expected.

Workaround:
Use custom iRule to fix this issue. There is no generic iRule for this issue, but here is a sample iRule:

XXXX is the file which usage attributeNode.

when REWRITE_REQUEST_DONE {
  if {
    [HTTP::path] ends_with "XXXX"
  } {

    # log "URI=([HTTP::path])"
    # Found the file to modify

    REWRITE::post_process 1
  }
}

when REWRITE_RESPONSE_DONE {
  set strt [string first {<script>try} [REWRITE::payload]]

  if {$strt > 0} {
    REWRITE::payload replace $strt 0 {
      <script>
        (function (){
         var old_F5_Inflate_value = F5_Inflate_value;
         F5_Inflate_value = function (o,sw,incr,v) {
            if (o && o.ownerDocument) {
                if (o.name == 'action') {
                  if (o.ownerElement) {
                    F5_Inflate_action(o.ownerElement,incr,v);
                  }
                }
            }
            return old_F5_Inflate_value.apply(this,arguments)
         }
        })();
      </script>
    }
  }
}


1004801-2 : In the violation details for Max Parameter Protocol Compliance, the incorrect number of parameters is shown.

Links to More Info: BT1004801

Component: Application Security Manager

Symptoms:
Incorrect number of parameter is shown in the violation details for Max Parameter Protocol Compliance.

Conditions:
Alarm or block flag is enabled on Max Parameter Protocol Compliance violation, and the request contains more than the maximum specified.

Impact:
Request event displays inaccurate number of parameters: the maximum number, plus 1 (e.g., if you specify 7, the maximum shown will be 8).

This occurs because the system stops parsing parameters when the violation is triggered, which occurs when receiving a request with more than the value specified in Max Parameter Protocol. So if you enable the alarm or block flag on requests with 5 parameters, a request with more than 5 parameters will be alarmed/blocked, and the number reported will be 6. If the system receives requests with more than 6 parameters, the number of parameters is still reported as 6.

Workaround:
None


1004697-3 : Saving UCS files can fail if /var runs out of space

Links to More Info: BT1004697

Component: iApp Technology

Symptoms:
When saving a UCS, /var can fill up leading to UCS failure and the following log message:

err diskmonitor[1441]: 011d0004:3: Disk partition /var has only 0% free

Conditions:
-- iApps LX installed.
-- Multiple iApps LX applications.
-- A /var partition of 1.5 GB.

Impact:
UCS archives can not be created.

Workaround:
You can use either of the following Workarounds:

-- Manually remove the /var/config/rest/node/tmp/BUILD and /var/config/rest/node/tmp/BUILDROOT directories.

-- Increase the size of /var/. For information, see K14952: Extending disk space on BIG-IP VE :: https://support.f5.com/csp/article/K14952


1004609-6 : SSL forward proxy virtual server may set empty SSL session_id in server hello.

Links to More Info: BT1004609

Component: Local Traffic Manager

Symptoms:
End user clients are unable to establish a TLS connection. Further investigation indicates that the Session ID length field is set to 0, but there is no session ID.

   TLSv1.2 Record Layer: Handshake Protocol: Server Hello
           Content Type: Handshake (22)
           Version: TLS 1.2 (0x0303)
           Length: 59
           Handshake Protocol: Server Hello
               Handshake Type: Server Hello (2)
               Length: 55
               Version: Version: TLS 1.2 (0x0303)
               Random: aa957f92a5de4cedcf9750b60b3efab6b345da6c32189e93…
               Session ID Length: 0 <=== !!!
   .....
   TLSv1.2 Record Layer: Change Cipher Spec Protocol: Change Cipher Spec
   .....
   TLSv1.2 Record Layer: Handshake Protocol: Encrypted Handshake Message
   .....

Conditions:
-- SSL forward proxy virtual server.
-- This can occur intermittently with normal HTTPS traffic. It occurs more frequently if the session cache's cache-timeout value is set to a low value.

Impact:
After receiving the invalid server hello message from the BIG-IP system, the client may generate unexpected_message (10) TLS alerts and the client may terminate SSL connection.

Workaround:
None


1004517-1 : BIG-IP tenants on VELOS cannot install EHFs

Links to More Info: BT1004517

Component: TMOS

Symptoms:
BIG-IP tenants created on VELOS using v14.1.4 software earlier than v14.1.4.3 cannot accept engineering hotfixes (EHF).

Conditions:
Installing EHF updates to BIG-IP tenants on VELOS running BIG-IP v14.1.4 software earlier than v14.1.4.3.

Impact:
EHF installation fails.

Workaround:
None


1004469-1 : SNMP OID ltmSipsessionProfileStatVsName and ltmSiprouterProfileStatVsName returns empty string

Links to More Info: BT1004469

Component: TMOS

Symptoms:
SNMP polling fails for ltmSipsessionProfileStatVsName and ltmSiprouterProfileStatVsName.

Conditions:
Run the snmpwalk for ltmSipsessionProfileStatVsName :

[root@d1:Active:Standalone] tmp # snmpwalk -c public localhost ltmSipsessionProfileStatVsName
F5-BIGIP-LOCAL-MIB::ltmSipsessionProfileStatVsName."/Common/test-sip"."" = STRING:
F5-BIGIP-LOCAL-MIB::ltmSipsessionProfileStatVsName."/Common/sipsession"."" = STRING:
F5-BIGIP-LOCAL-MIB::ltmSipsessionProfileStatVsName."/Common/sipsession-alg"."" = STRING:

----------
Run the snmpwalk for ltmSiprouterProfileStatTable

[root@ltm1:Active:Standalone] config # snmpwalk -c public localhost ltmSiprouterProfileStatTable
F5-BIGIP-LOCAL-MIB::ltmSiprouterProfileStatName."/Common/siprouter"."" = STRING: /Common/siprouter
F5-BIGIP-LOCAL-MIB::ltmSiprouterProfileStatName."/Common/siprouter-alg"."" = STRING: /Common/siprouter-alg
F5-BIGIP-LOCAL-MIB::ltmSiprouterProfileStatVsName."/Common/siprouter"."" = STRING:
F5-BIGIP-LOCAL-MIB::ltmSiprouterProfileStatVsName."/Common/siprouter-alg"."" = STRING:
F5-BIGIP-LOCAL-MIB::ltmSiprouterProfileStatTotMessgesIn."/Common/siprouter"."" = Counter64: 0
F5-BIGIP-LOCAL-MIB::ltmSiprouterProfileStatTotMessgesIn."/Common/siprouter-alg"."" = Counter64: 0
F5-BIGIP-LOCAL-MIB::ltmSiprouterProfileStatTotMessagesInRetry."/Common/siprouter"."" = Counter64: 0
F5-BIGIP-LOCAL-MIB::ltmSiprouterProfileStatTotMessagesInRetry."/Common/siprouter-alg"."" = Counter64: 0

Impact:
Returns empty. Cannot extract the virtual server name of a SIP session and SIP router profile through SNMP.

Workaround:
None


1003765-2 : Authorization header signature triggered even when explicitly disabled

Links to More Info: BT1003765

Component: Application Security Manager

Symptoms:
Requests with base64 encoded Authorization header with disabled signatures might result in a blocking page even though the specific signature is disabled.

Conditions:
Base64 encoded Authorization header is included in the request.

Impact:
A signature violation is detected, even though the signature is disabled.

Workaround:
None


1003629 : PAYG license becomes invalid when swapping associated NICs for instances in both Azure and AWS.

Links to More Info: BT1003629

Component: TMOS

Symptoms:
If swapping management and data plane NICs using the onboarding Terraform template, you will receive a, “License is not operational (expired or digital signature does not match contents)” message.

Conditions:
- A multi-NIC instance deployed in Azure or AWS using a PAYG license.

- Use the onboarding Terraform template to swap the management (1st NIC) and the data plane NICs.

Impact:
After swapping NICs and rebooting the instance, BIG-IP cannot successfully validate the PAYG license.

Workaround:
Due to Azure and AWS metadata service calls restricted to using the primary IP address, avoid swapping NICs, as it is currently NOT supported in those Clouds.


1003469-1 : The BIG-IP GUI fails to reset the statistics for an IPv6 pool member and returns an error.

Links to More Info: BT1003469

Component: TMOS

Symptoms:
When trying to reset the statistics for an IPv6 pool member using the GUI, the operation fails and the system returns one of the following errors (depending on the software version in use):

01030010:3: eXtremeDB - search operation failed

Unable to complete request

Conditions:
This issue occurs when you attempt to use the BIG-IP GUI to:

-- Reset the statistics of one or more IPv6 pool members you have selected individually.

-- Reset the statistics of all pools by using the 'Select All' checkbox (provided the system contains IPv6 pool members).

Impact:
Inability to reset the statistics using the GUI.

Workaround:
You can use the tmsh utility to reset the pool member's statistics from the CLI. Example command:

tmsh reset-stats ltm pool my-pool members { 2001:DB8::1.80 }


1003377-3 : Disabling DoS TCP SYN-ACK does not clear suspicious event count option

Links to More Info: BT1003377

Component: Advanced Firewall Manager

Symptoms:
When the 'Only Count Suspicious Events' option is turned on for the TCP SYN ACK Flood vector and the vector gets disabled, TMM continues operating as if 'Only Count Suspicious Events' is still configured.

Conditions:
Disabling TCP SYN ACK Flood vector with 'Only Count Suspicious Events' enabled.

Impact:
BIG-IP system might continue altering TCP initial sequence numbers for SYN-ACK cookie validations.

Workaround:
Disable the 'Only Count Suspicious Events' option first, and then disable TCP SYN ACK Flood vector.


1003233-2 : SNMP Polling can cause inconsistencies in gtm link stats.

Links to More Info: BT1003233

Component: Global Traffic Manager (DNS)

Symptoms:
If the uplink router does not allow SNMP polling, and snmp_link monitor is applied, then GTM stats becomes inconsistent.

Conditions:
The router is not being probed using SNMP.

Impact:
Status values will be inconsistent.

Workaround:
N/A


1003081-3 : GRE/TB-encapsulated fragments are not forwarded.

Links to More Info: BT1003081

Component: TMOS

Symptoms:
IP fragments that arrive over a GRE/TB tunnel are not reassembled, and are not forwarded through the BIG-IP system.

Conditions:
This occurs if all of the following conditions are true:

-- BIG-IP system with more than one TMM instance running.
-- Running a version or Engineering Hotfix that contains a fix for ID997541 (https://cdn.f5.com/product/bugtracker/ID997541.html).
-- GRE Round Robin DAG (the DB variable dag.roundrobin.gre) is enabled.
-- IP fragments arrive over GRE tunnel.

Impact:
BIG-IP system fails to process fragmented IP datagrams.

Workaround:
None


1002969-4 : Csyncd can consume excessive CPU time

Links to More Info: BT1002969

Component: Local Traffic Manager

Symptoms:
Following a configuration change or software upgrade, the "csyncd" process becomes always busy, consuming excessive CPU.

Conditions:
-- occurs on a multiblade VIPRION chassis
-- may occur with or without vCMP
-- may occur after configuring F5 Telemetry Streaming, but may also occur in other circumstances
-- large numbers of files are contained in one or more of the directories being sync'ed between blades

Impact:
The overuse of CPU resources by "csyncd" may starve other control-plane processes. Handling of payload network traffic by the data plane is not directly affected.

Workaround:
To mitigate the processing load, identify which directory or directories contain excessive numbers of files being replicated between blades by "csyncd". If this replication is not absolutely needed (see below), such a directory can be removed from the set of directories being sync'ed.

For example: if there are too many files being generated in the "/run/pamcache" directory (same as "/var/run/pamcache"), remove this directory from the set being acted upon by "csyncd" by running the following commands to comment-out the associated lines in the configuration file:

# clsh "cp /etc/csyncd.conf /etc/csyncd.conf.$(date +%Y%m%d_%H%M%S)"

# clsh "sed -i '/run\/pamcache/,+2s/^/#/' /etc/csyncd.conf"

# clsh "bigstart restart csyncd"

If the problem was observed soon after the installation of F5 Telemetry Streaming, the configuration can be adjusted to make csyncd ignore the related files in a subdirectory of "/var/config/rest/iapps". Run the following commands:

# clsh "cp /etc/csyncd.conf /etc/csyncd.conf.$(date +%Y%m%d_%H%M%S)"

# clsh "sed -i '/\/var\/config\/rest\/iapps/a \ \ \ \ \ \ \ \ ignore f5-telemetry' /etc/csyncd.conf"

# clsh "bigstart restart csyncd"


----

The impact of disabling replication for the pamcache folder is that in the event of a primary blade failover, the new primary blade would not be aware of the existing valid auth tokens, so the user (eg, a GUI user, or a REST script already in progress at the time of the failover) would need to authenticate again.


1002417-2 : Switch L2 forwarding entries learnt on multi-blade trunk in one blade needs to be synchronized to other blades of that trunk

Links to More Info: BT1002417

Component: TMOS

Symptoms:
In a chassis, when the switch needs to forward a packet where the destination MAC address does not exist in the L2 forwarding table (DLF, destination lookup failure), the packet is forwarded to blade one and flooded there. This can lead to interfaces on blade one being more heavily used.

Conditions:
Altering of trunk vlan memberships after failovers will lead to traffic imbalance on egress ports.

Impact:
It may lead to an out of bandwidth condition on interfaces.


1002413-2 : Websso puts quotation marks around non-string claim type 'custom' values

Links to More Info: BT1002413

Component: Access Policy Manager

Symptoms:
When you define a claim to use with OAuth bearer SSO, and the claim-type setting is set to custom, the claim value is treated as a string and encapsulated in quotation marks.

Conditions:
-- OAuth bearer SSO is configured.
-- The OAuth claim value being used is of type 'custom'.

Impact:
The claim value is encapsulated in quotation marks and processed as a string and OAuth does not work properly.

Workaround:
None


1002345-4 : Transparent DNS monitor does not work after upgrade

Links to More Info: BT1002345

Component: In-tmm monitors

Symptoms:
DNS Pool state changes from up to down following an upgrade.

Conditions:
A transparent DNS monitor is configured to use the loopback address.

Impact:
The DNS pool is marked down.

Workaround:
None


1001129-1 : Maximum Login Failures lockout for root and admin

Component: TMOS

Symptoms:
The root/admin account does not lock out when multiple login failures occur.

Conditions:
Local accounts such as root and admin occur multiple login failures.

Impact:
The root or admin account is not locked out. Other accounts are locked out after multiple login failures.

Workaround:
None


1001101-1 : Cannot update/display GTM/DNS listener route advertisement correctly

Links to More Info: BT1001101

Component: Global Traffic Manager (DNS)

Symptoms:
Not able to update/display GTM/DNS listener route advertisement correctly.

Conditions:
Operating from the GUI GTM/DNS listener page.

Impact:
Not able to manage route advertisement from GUI GTM listener page.

Workaround:
Instead of GTM/DNS GUI, use LTM virtual address operations to manage GTM/DNS listener route advertisement.


1001069-5 : VE CPU usage higher after upgrade, given same throughput

Links to More Info: BT1001069

Component: TMOS

Symptoms:
Significant increase in CPU usage post-upgrade.

Conditions:
- Upgrading from version 13.x to a later version.
- Configured BIG-IP Virtual Edition (VE) that uses the sock driver.

Impact:
Significant increase in CPU usage, leading to potential degradation or disruption of traffic.

Workaround:
Create the following overrides:
- In '/config/tmm_init.tcl' add or append the following:
ndal mtu 1500 1137:0043
device driver vendor_dev 1137:0043 xnet

- In '/config/xnet_init.tcl' add or append the following:
device driver vendor_dev 1137:0043 dpdk

Note: These overrides must be re-applied every time an upgrade is done.


1000669-4 : Tmm memory leak 'string cache' leading to SIGFPE

Links to More Info: BT1000669

Component: Access Policy Manager

Symptoms:
SIGFPE core on tmm. The tmm string cache leaks aggressively and memory reaches 100% and triggers a core.

In /var/log/tmm you see an error:

Access encountered error: ERR_OK. File: ../modules/hudfilter/access/access_session.c, Function: access_session_delete_callback, Line: 2123

Conditions:
This can be encountered while APM is configured and passing traffic. Specific conditions are unknown.

Impact:
Traffic disrupted while tmm restarts.

Workaround:
None


1000561-5 : HTTP chunked encoding markers incorrectly passed to HTTP/2 client-side

Links to More Info: BT1000561

Component: Local Traffic Manager

Symptoms:
HTTP/2 virtual servers pass the chunk size bytes from the server-side (HTTP/1.1) to the client-side (HTTP/2) when OneConnect and request-logging profiles are applied.

This results in a malformed HTTP response.

Conditions:
-- BIG-IP configured with a HTTP/2 virtual server using OneConnect and request-logging profiles.
-- The pool member sends a chunked response.

Impact:
The HTTP response passed to the client-side includes chunk size header values when it should not, resulting in a malformed HTTP response.

Workaround:
Change HTTP response-chunking to either 'unchunk' or 'rechunk' in the HTTP profile for the virtual server.


1000325-1 : UCS load with 'reset-trust' may not work properly if base configuration fails to load

Links to More Info: BT1000325

Component: TMOS

Symptoms:
When loading a UCS archive using the 'reset-trust' option, if the system fails to load the base configuration from the UCS archive, the system may fail to regenerate new device trust certificates and keys.

This can result in subsequent issues, including configuration load failures after an upgrade, such as:

01070712:3: Values (/Common/dtca.key) specified for trust domain (/Common/Root): foreign key index (key_fk) do not point at an item that exists in the database.
Unexpected Error: Loading configuration process failed.

Conditions:
-- Loading a UCS file using the 'reset-trust' option.
-- The system fails to load the base configuration (bigip_base.conf) in the UCS archive for any reason.
-- The base configuration is corrected, and subsequently loaded (e.g., with 'tmsh load sys config').

Impact:
-- The system does not regenerate critical device trust keys and certificates.
-- After a subsequent upgrade, the BIG-IP system goes to INOPERATIVE state, and reports this error:

01070712:3: Values (/Common/dtca.key) specified for trust domain (/Common/Root): foreign key index (key_fk) do not point at an item that exists in the database.
Unexpected Error: Loading configuration process failed.

Workaround:
Remove trust-domain from the bigip_base.conf file and reload the configuration.


1000069-3 : Virtual server does not create the listener

Links to More Info: BT1000069

Component: Local Traffic Manager

Symptoms:
A virtual-address is in an offline state.

Conditions:
An address-list is used on a virtual server in a non-default route domain.

Impact:
The virtual IP address remains in an offline state.

Workaround:
Using tmsh, create the traffic-matching-criteria. Specify the route domain, and attach it to the virtual server.




This issue may cause the configuration to fail to load or may significantly impact system performance after upgrade


*********************** NOTICE ***********************

For additional support resources and technical documentation, see:
******************************************************