Applies To:Show Versions
BIG-IQ Centralized Management
- 5.1.0, 5.0.0
About VE Xen Project deployment
To deploy the BIG-IQ® Virtual Edition (VE) system on Xen Project, you perform these tasks:
- Verify the host machine requirements.
- Deploy a BIG-IQ® system as a virtual machine.
- Deploy a BIG-IP® system.
- After you have deployed the virtual machines, log in to the BIG-IQ VE system and run the Setup utility. Using the Setup utility, you perform basic network configuration tasks, such as assigning VLANs to interfaces.
- Configure secure communication between the BIG-IQ system and the BIG-IP device.
Host machine requirements and recommendations
To successfully deploy and run the BIG-IQ® VE system, the host system must satisfy minimum requirements.
The host system must include these elements:
- CentOS, Debian, Fedora, RHEL, or Ubuntu with the Xen Project package. The BIG-IQ Virtual Edition and Supported Hypervisors Matrix, published on the AskF5™ web site, http://support.f5.com identifies the Linux versions that are supported.
- Connection to a common NTP source (this is especially important for each host in a redundant system configuration)
- Use a 64-bit architecture.
- Have support for virtualization (AMD-V or Intel VT-x) enabled.
- Support a one-to-one thread-to-defined virtual CPU ratio, or (on single-threading architectures) support at least one core per defined virtual CPU.
- Intel processors must be from the Core (or newer) workstation or server family of CPUs.
Deploying the BIG-IQ VE virtual machine
The primary task in deploying BIG-IQ® VE on the open source Xen Project environment is creating and executing a configuration file that sets up most of what you need to get up and running.
- In a browser, open the F5 Downloads page (https://downloads.f5.com).
- On the Downloads Overview page, select Find a Download.
- Under Product Line, select Centralized Management.
- Under Name, select the release you want to install.
- If the End User Software License is displayed, read it and then click I Accept.
Determine which BIG-IQ v5.x/Virtual Edition file package to download.
- If you are installing a BIG-IQ, download the file name that ends in .qcow2.zip
- If you are installing a Logging Node, download the file name that ends in LARGE.qcow2.zip
The BIG-IQ file package creates a 95GB disk footprint at installation.
The Logging Node file package creates a 500GB disk footprint at installation.
Extract the two files from the Zip archive and save it where your
qcow2 files reside on the Xen Project server.
Important: Two files are created when you extract the qcow file. You must install the larger file first.
- The name of the larger file is similar to BIG-IQ-<version_number>.<build_number>.qcow2.
- The name of the smaller file is similar to BIG-IQ-<version_number>.<build_number>.DATASTOR.LTM.qcow2.
Generate a MAC address for the network interface card associated with the
Important: Be sure that the MAC address you create starts with the prefix 00:16:3e:.To create this address, you can use a tool such as MAC Address Generator (http://www.miniwebtool.com/mac-address-generator/).
Use an editor to create a BIG-IQ VM definition file that specifies the required
parameters for your VM.
# vi /etc/xen/<config_file_name>Important: The sample configuration file provided here serves only as an example of the kinds of parameters you need to specify for your virtual machine. The actual file that you create will likely contain different parameters and settings.
name = <config_file_name> maxmem = 4096 memory = 4096 vcpus = 2 builder = "hvm" boot = "c" pae = 1 acpi = 1 apic = 1 hpet = 1 localtime = 0 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" sdl = 0 vnc = 1 vncunused = 1 keymap = "en-us" disk = [ 'tap:qcow2:/<vdisk_path>/BIG-IQ-<version_number>.<build_number>.qcow2,hda,w', 'tap:qcow2:/<vdisk_path>/BIG-IQ-<version_number>.<build_number>.DATASTOR.LTM.qcow2,hdb,w',] vif = [ "mac=00:16:<mgmt_interface_mac>,bridge=mgmtbr,script=vif-bridge", "mac=00:16:3e:<external_interface_mac>,bridge=ext_bridge,script=vif-bridge", "mac=00:16:3e:<internal_interface_mac>,bridge=int_bridge,script=vif-bridge",] parallel = "none" serial = "pty" #pci = [ '05:10.0', '05:10.1' ]Important: The last line of the example configuration file contains an optional entry that specifies the IDs for PCI external and internal network interface cards (NIC). This optional entry is required for SR-IOV support. Naturally, if you use this entry, you omit the external and internal bridges specified in the vif section.Once you have perfected and saved your configuration file, you are ready to create the BIG-IQ VM.
Run the configuration file using an open source tool such as xm.
xm create /etc/xen/<config_file_name>The console should indicate a successful start up by displaying something similar to this: Started domain <config_file_name>(id=444).
Allow some time for the boot-up process; then, you should be able to connect to
the BIG-IQ console.
# xm console <config_file_name>
Power on the BIG-IQ VE virtual machine
There are two default accounts used for initial configuration and setup:
- The root account provides access locally, or using SSH, or using the F5 Configuration utility. The root account password is default.
- The admin account provides access through the web interface. The admin account password is admin.
You should change passwords for both accounts before bringing a system into production.
Accessing the BIG-IQ VE management user interface
If no IP address was assigned, you can assign one by using the BIG-IQConfiguration utility.
- At the password prompt, type default.
Type config and press Enter.
The F5 Management Port Setup screen opens.
- Click OK.
- If you want DHCP to automatically assign an address for the management port, select Yes. Otherwise, select No and follow the instructions for manually assigning an IP address and netmask for the management port.
You can use a hypervisor generic statement, such as tmsh list sys management-ip to confirm that the management IP address has been properly assigned.