Applies To:
Show Versions
BIG-IQ ADC
- 4.5.0
BIG-IQ Cloud
- 4.5.0, 4.4.0, 4.3.0
BIG-IQ Device
- 4.5.0, 4.4.0, 4.3.0
BIG-IQ Security
- 4.5.0, 4.4.0, 4.3.0
BIG-IQ Centralized Management
- 5.4.0, 5.3.0, 5.2.0, 5.1.0, 5.0.0, 4.6.0
Platform Specifications
General specifications for system features
This table lists general specifications for system features for the BIG-IQ® 7000 Series platform.
| Item | Specification |
|---|---|
| Transceiver modules hot swap | Support for hot swap of SFP, SFP+, and QSFP+ transceiver modules |
| Power supply hot swap | Support for hot swap of the power supplies |
| Jumbo frames | Support for maximum Ethernet frame size of 9216 bytes and MTU of 9128 bytes |
Platform hardware specifications
This table lists hardware specifications for the BIG-IQ™ 7000 platform.
| Item | Specification |
|---|---|
| Dimensions | H: 3.45 inches (8.76 cm) x W: 17.3 inches (43.94 cm) x D: 21.4 inches (54.36 cm) (per unit) 2U industry standard rack-mount chassis |
| Weight | 40 pounds (18.14 kg) with one power supply, two hard
drives, and bezel installed (per unit) 43 pounds (19.50 kg) with two power supplies, two hard drives, and bezel installed (per unit) 42.4 pounds (19.23 kg) with two power supplies, one solid-state drive, and bezel installed (per unit) 42.6 pounds (19.32 kg) with two power supplies, two solid-state drives, and bezel installed (per unit)
|
| Processor | 1 x Quad-Core Intel® Xeon® processor |
| Communication interfaces | 4 x 1GbE Cu RJ45 ports 8 x 10GbE SFP+ ports 1 x 10/100/1000 Ethernet Management port 1 x RJ45 console port 1 x RJ45 failover port 2 x USB 2.0 interfaces |
| Storage drive capacity | 2 x 1 TB hard disk drive (HDD) |
| RAM | 32 GB |
| AC power input requirements | 2 x 400 W 90-240VAC, 50-60hz |
| DC power supply | 1-2 x 300 W DC Operating range: 40 to 72 VDC |
Platform environmental operating specifications
This table lists platform environmental operating specifications.
| Item | Specification |
|---|---|
| Operational temperature | 32 to 104°F (0 to 40°C) |
| Operational relative humidity | GR-63-CORE table 4-4
5% to 85% (40°C) non-condensing 5% to 90% (40°C) non-condensing for a maximum of |
| Non-operational temperature | -40 to 158°F (-40 to 70°C) |
| Non-operational relative humidity | 5 to 95% (40°C) non-condensing |
Platform power specifications - BIG-IQ 7000
This table lists power specifications for the BIG-IQ™ 7000 platform.
| Item | Single Power Supply | Dual Power Supply |
|---|---|---|
| Typical power draw (AC power; 50% load; temp 25°C) | 110VAC input: 200W 220VAC input: 195W |
110VAC input: 205W 220VAC input: 200W |
| Typical power draw (DC power; 50% load; temp 25°C) | 48VDC input: 205W | 48VDC input: 210W |
| Maximum power draw (AC power) | 90VAC input: 290W | 90VAC input: 295W |
| Maximum power draw (DC power) | 40VDC input: 310W | 40VDC input: 315W |
| Typical heat generated (AC power) | 110VAC input: 683 BTU/hour 220VAC input: 666 BTU/hour |
110VAC input: 700 BTU/hour 220VAC input: 683 BTU/hour |
| Typical heat generated (DC power) | 48VDC input: 700 BTU/hour | 48VDC input: 717 BTU/hour |
| Maximum heat generated (AC power) | 90VAC input: 990 BTU/hour | 90VAC input: 1007 BTU/hour |
| Maximum heat generated (DC power) | 40VDC input: 1058 BTU/hour | 40VDC input: 1075 BTU/hour |
Safety requirements
This equipment complies with these requirements of the Low Voltage Directive 2006/95/EC:
| EC Type Examination Certificates: | Master Contract 252302 | |
| CB Scheme | ||
| EN 60950-1:2006+A11:2009+A1:2010+A12:2011 | ||
| IEC 60950-1:2005, A1:2009 | ||
| CSA 60950-1-07, Including Amendment 1:2011 | ||
| ANSI/UL 60950-1-2011 | ||
EMC requirements
USA--FCC Class A, Canada--Industry Canada Class A
This equipment complies with Subpart B of Part 15 of FCC Rules for Class A digital devices, Industry Canada ICES-003, Issue 5. Operation is subject to these two conditions:
- This equipment may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
European Union
This equipment complies with these requirements of the EMC Directive 2004/108/EC:
| As Telecommunication Network Equipment (TNE) in Both Telecom Centers and Other than Telecom Centers per (as applicable): | ||
| Directive | Required Limits | |
| EN | 300 386 V1.5.1 (2010-10) | |
| EN | 55022:2010 | Class A |
| EN | 61000-3-2:2006+A1:2009+A2:2009 | |
| EN | 61000-3-3:2008 | |
| EN | 55024:2010 | |
| IEC61000-4-2 | 6 kV (Direct), 8 kV (Air) | |
| IEC61000-4-3 | 3 V/m 80-1000MHz, 10 V/m 800-960 MHz and 1400-2700 MHz | |
| IEC61000-4-4 | 1 kV AC and DC Power Lines, 0.5 kV Signal Lines | |
| IEC61000-4-5 | 2 kV AC Line-Gnd, 1 kV AC Line-Line and Outdoor Signal Lines, 0.5 kV Indoor Signal Lines > 10m | |
| IEC61000-4-6 | 3 V | |
| IEC61000-4-8 | ||
| IEC61000-4-11 | ||
| As Information Technology Equipment (ITE) Class A per (as applicable): | ||
| EN | 55022:2010 | Class A |
| EN | 61000-3-3:2008 | |
| EN | 55024:2010 | |
| IEC61000-4-2 | 4 kV (Direct), 8 kV (Air) | |
| IEC61000-4-3 | 3 V/m | |
| IEC61000-4-4 | 1 kV AC Power Lines, 0.5 kV Signal, and DC Power Lines | |
| IEC61000-4-5 | 1 kV AC Line-Line and Outdoor Signal Lines, 2 kV AC Line-Gnd, 0.5 kV DC Power Lines | |
| IEC61000-4-6 | 3 V | |
| IEC61000-4-8 | ||
| IEC61000-4-11 | ||
Acoustic, airflow, and altitude specifications
This table lists acoustic levels, airflow movement, and operational altitude specifications for the BIG-IQ™ 7000 platform.
| Specification type | Detail | Units | Value |
|---|---|---|---|
| Acoustic 1 | Front
Back Left Right Top |
dBA
dBA dBA dBA dBA |
67
78 66 69 69 |
| Altitude 2 | Operational
Non-operational |
Feet (Meters)
Feet (Meters) |
6,000 (1,829)
40,000 (12,192) |
| Airflow 3 | Open air | CFM | 135.7 |
