Manual Chapter : Creating a VLAN

Applies To:

Show Versions Show Versions

BIG-IP AAM

  • 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP APM

  • 17.0.0, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP Analytics

  • 17.0.0, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP Link Controller

  • 17.0.0, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP LTM

  • 17.0.0, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP PEM

  • 17.0.0, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP AFM

  • 17.0.0, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP DNS

  • 17.0.0, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0

BIG-IP ASM

  • 17.0.0, 16.1.3, 16.1.2, 16.1.1, 16.1.0, 16.0.1, 16.0.0, 15.1.7, 15.1.6, 15.1.5, 15.1.4, 15.1.3, 15.1.2, 15.1.1, 15.1.0, 15.0.1, 15.0.0, 14.1.5, 14.1.4, 14.1.3, 14.1.2, 14.1.0
Manual Chapter

Creating a VLAN

VLANs
represent a logical collection of hosts that can share network resources, regardless of their physical location on the network. You create a VLAN to associate physical interfaces with that VLAN.
  1. On the Main tab, click
    Network
    VLANs
    .
    The VLAN List screen opens.
  2. Click
    Create
    .
    The New VLAN screen opens.
  3. In the
    Name
    field, type a unique name for the VLAN.
  4. In the
    Tag
    field, type a numeric tag, between 1-4094, for the VLAN, or leave the field blank if you want the BIG-IP system to automatically assign a VLAN tag.
    The VLAN tag identifies the traffic from hosts in the associated VLAN.
  5. If you want to use Q-in-Q (double) tagging, use the
    Customer Tag
    setting to perform the following two steps. If you do not see the
    Customer Tag
    setting, your hardware platform does not support Q-in-Q tagging and you can skip this step.
    1. From the
      Customer Tag
      list, select
      Specify
      .
    2. Type a numeric tag, from 1-4094, for the VLAN.
    The customer tag specifies the inner tag of any frame passing through the VLAN.
  6. For the
    Interfaces
    setting,
    1. From the
      Interface
      list, select an interface number.
    2. From the
      Tagging
      list, select
      Untagged
      .
    3. Click
      Add
      .
  7. For the
    Hardware SYN Cookie
    setting, select or clear the check box.
    When you enable this setting, the BIG-IP system triggers hardware SYN cookie protection for this VLAN.
    Enabling this setting causes additional settings to appear. These settings appear on specific BIG-IP platforms only.
  8. For the
    Syncache Threshold
    setting, retain the default value or change it to suit your needs.
    The
    Syncache Threshold
    value represents the number of outstanding SYN flood packets on the VLAN that will trigger the hardware SYN cookie protection feature.
    When the
    Hardware SYN Cookie
    setting is enabled, the BIG-IP system triggers SYN cookie protection in either of these cases, whichever occurs first:
    • The number of TCP half-open connections defined in the LTM setting
      Global SYN Check Threshold
      is reached.
    • The number of SYN flood packets defined in this
      Syncache Threshold
      setting is reached.
  9. For the
    SYN Flood Rate Limit
    setting, retain the default value or change it to suit your needs.
    The
    SYN Flood Rate Limit
    value represents the maximum number of SYN flood packets per second received on this VLAN before the BIG-IP system triggers hardware SYN cookie protection for the VLAN.
  10. Click
    Finished
    .
    The screen refreshes, and it displays the new VLAN in the list.