Manual :
3-DNS Installation Guide, version 4.0.1
Applies To:
Show Versions
3-DNS Controller versions 1.x - 4.x
- 4.0.1 PTF-04, 4.0.1 PTF-03, 4.0.1 PTF-02, 4.0.1 PTF-01, 4.0.1
Original Publication Date: 03/01/2010
Finding help and technical support resources
Setting Up the Hardware
Unpacking and installing the hardware
- Reviewing the hardware requirements
- Familiarizing yourself with the 3-DNS Controller hardware
- Environmental requirements and usage guidelines
- Installing and connecting the hardware
Addressing hardware configuration issues
- Setting up a stand-alone unit or a redundant system
- Setting up fail-over for a redundant system
- Triggering a fail-over in a redundant system
- Using redundant systems with the sync group feature
- Using more than one network interface
Setting up automatic DNS zone file management
Working with the First-Time Boot Utility
Using the First-Time Boot utility
- Gathering configuration information
- An important note about configuring non-crypto 3-DNS Controllers
Starting the First-Time Boot utility
- Defining a root password
- Defining a host name
- Configuring a default route
- Configuring a time zone
- Configuring NTP clocks
- Configuring a redundant system
- Configuring the interfaces
Configuring settings for the 3-DNS web server
Configuring remote administration
Configuring the 3-DNS Controller mode
Configuring NameSurfer for zone file management
Confirming your configuration settings
Committing your configuration settings to the system
Additional Setup Options
Enabling remote login tools
Preparing workstations for command line access
Using a serial terminal
Configuring Sendmail
