F5 Logo MyF5
Search
  1. MyF5 Home
  2. Knowledge Centers
  3. BIG-IP DNS
  4. BIG-IP DNS: Implementations
  5. Configuring a RCODE to Return a Response
Manual Chapter : Configuring a RCODE to Return a Response

Applies To:

Show Versions Show Versions

BIG-IP DNS

  • 12.1.5, 12.1.4, 12.1.3, 12.1.2, 12.1.1, 12.1.0
Manual Chapter
Table of Contents | << Previous Chapter | Next Chapter >>

Configuring a RCODE to Return a Response

Overview: Configuring an RCODE to return a response to the client when load balancing fails

You can use BIG-IP®DNS to configure a return code (RCODE) to return a response to the client when load balancing fails. Only when load balancing fails and the RCODE configuration is enabled, will an RCODE response be returned.

There are two types of load balancing failures where an RCODE response will be returned:

  • When using all the Primary and Alternate methods for wide IP pools.
  • When using a Return to DNS load balancing method.

Task summary

Perform these tasks to configure a return code (RCODE) to return a response to the client.

Creating a pool with an applicable pool type

Ensure that at least one virtual server or wide IP exists in the configuration before you start to create a load balancing pool.
Create a pool in order to configure the BIG-IP® system to load balance global traffic.

Creating a pool with pool type A or AAAA

Create an A or AAAA pool type in order to configure the BIG-IP® system to load balance global traffic.
  1. On the Main tab, click DNS > GSLB > Pools .
    The Pool List screen opens.
  2. Click Create.
  3. In the General Properties area, in the Name field, type a name for the pool.
    Names must begin with a letter, and can contain only letters, numbers, and the underscore (_) character.
    Important: The pool name is limited to 63 characters.
  4. From the Type list, depending on the type of the system (IPv4 or IPv6), select either an A or AAAA pool type.
  5. In the Configuration area, for the Health Monitors setting, in the Available list, select a monitor type, and move the monitor to the Selected list.
    Tip: Hold the Shift or Ctrl key to select more than one monitor at a time.
  6. In the Members area, for the Load Balancing Method setting, from the Preferred List, select Round Robin.
    Tip: When deploying this implementation in a lab environment, to determine whether the BIG-IP® system returns the DNS response that you expect, try selecting the Global Availability method and disabling the first pool member in the list.
  7. From the Alternate and Fallback lists, select a static load balancing method, based on your network environment. Ensure that you select a load balancing method that does not take current server performance or connection load into account.
  8. In the Members area, for the Member List setting, add virtual servers as members of this load balancing pool.
    The system evaluates the virtual servers (pool members) in the order in which they are listed. A virtual server can belong to more than one pool.
    1. Select a virtual server from the Virtual Server list.
    2. Click Add.
  9. Click Finished.

Creating a pool with pool type NAPTR

Create an NAPTR pool type in order to configure the BIG-IP® system to load balance global traffic.
  1. On the Main tab, click DNS > GSLB > Pools .
    The Pool List screen opens.
  2. Click Create.
  3. In the General Properties area, in the Name field, type a name for the pool.
    Names must begin with a letter, and can contain only letters, numbers, and the underscore (_) character.
    Important: The pool name is limited to 63 characters.
  4. From the Type list, select the NAPTR type.
  5. In the Members area, for the Load Balancing Method setting, from the Preferred List, select Round Robin.
    Tip: When deploying this implementation in a lab environment, to determine whether the BIG-IP® system returns the DNS response that you expect, try selecting the Global Availability method and disabling the first pool member in the list.
  6. From the Alternate and Fallback lists, select a static load balancing method, based on your network environment. Ensure that you select a load balancing method that does not take current server performance or connection load into account.
  7. In the Members area, for the Member List setting, from the Flags list, select a flag.
  8. Add wide IPs as members of this load balancing pool.
    The system evaluates the wide IPs (pool members) in the order in which they are listed. A wide IP can belong to more than one pool.
    1. From the Wide IP list, select a wide IP or type a name that matches an existing wildcard wide IP.
    2. In the Service field, type the name of a service or protocol.
    3. Click Add.
  9. Click Finished.

Creating a pool with pool type SRV

Create a SRV pool type in order to configure the BIG-IP® system to load balance global traffic.
  1. On the Main tab, click DNS > GSLB > Pools .
    The Pool List screen opens.
  2. Click Create.
  3. In the General Properties area, in the Name field, type a name for the pool.
    Names must begin with a letter, and can contain only letters, numbers, and the underscore (_) character.
    Important: The pool name is limited to 63 characters.
  4. From the Type list, select the SRV type.
  5. In the Members area, for the Load Balancing Method setting, from the Preferred List, select Round Robin.
    Tip: When deploying this implementation in a lab environment, to determine whether the BIG-IP® system returns the DNS response that you expect, try selecting the Global Availability method and disabling the first pool member in the list.
  6. From the Alternate and Fallback lists, select a static load balancing method, based on your network environment. Ensure that you select a load balancing method that does not take current server performance or connection load into account.
  7. Add wide IPs as members of this load balancing pool.
    The system evaluates the wide IPs (pool members) in the order in which they are listed. A wide IP can belong to more than one pool.
    1. In the Members area, for the Member setting, from the Wide IP list, select a wide IP or type a name that matches an existing wildcard wide IP.
    2. In the Port field, type a port number.
    3. Click Add.
  8. Click Finished.

Creating a pool with pool type CNAME

Create a CNAME pool type in order to configure the BIG-IP® system to load balance global traffic.
  1. On the Main tab, click DNS > GSLB > Pools .
    The Pool List screen opens.
  2. Click Create.
  3. In the General Properties area, in the Name field, type a name for the pool.
    Names must begin with a letter, and can contain only letters, numbers, and the underscore (_) character.
    Important: The pool name is limited to 63 characters.
  4. From the Type list, select the CNAME type.
  5. In the Members area, for the Load Balancing Method setting, from the Preferred List, select Round Robin.
    Tip: When deploying this implementation in a lab environment, to determine whether the BIG-IP® system returns the DNS response that you expect, try selecting the Global Availability method and disabling the first pool member in the list.
  6. From the Alternate and Fallback lists, select a static load balancing method, based on your network environment. Ensure that you select a load balancing method that does not take current server performance or connection load into account.
  7. Add wide IPs as members of this load balancing pool.
    The system evaluates the wide IPs (pool members) in the order in which they are listed. A wide IP can belong to more than one pool.
    1. In the Members area, for the Member setting, from the Wide IP list, select a wide IP or type a name that matches either an existing wildcard wide IP or wide IP alias.
    2. If necessary, to allow the member to point to a name that does not exist as a wide IP on DNS, select the Static Target check box.
    3. Click Add.
  8. Click Finished.

Creating a pool with pool type MX

Create a MX pool type in order to configure the BIG-IP® system to load balance global traffic.
  1. On the Main tab, click DNS > GSLB > Pools .
    The Pool List screen opens.
  2. Click Create.
  3. In the General Properties area, in the Name field, type a name for the pool.
    Names must begin with a letter, and can contain only letters, numbers, and the underscore (_) character.
    Important: The pool name is limited to 63 characters.
  4. From the Type list, select the MX type.
  5. In the Members area, for the Load Balancing Method setting, from the Preferred List, select Round Robin.
    Tip: When deploying this implementation in a lab environment, to determine whether the BIG-IP® system returns the DNS response that you expect, try selecting the Global Availability method and disabling the first pool member in the list.
  6. From the Alternate and Fallback lists, select a static load balancing method, based on your network environment. Ensure that you select a load balancing method that does not take current server performance or connection load into account.
  7. Add wide IPs as members of this load balancing pool.
    The system evaluates the wide IPs (pool members) in the order in which they are listed. A wide IP can belong to more than one pool.
    1. In the Members area, for the Member setting, from the Wide IP list, select a wide IP or type a name that matches an existing wildcard wide IP.
    2. Click Add.
  8. Click Finished.

Creating a wide IP that provides for returning a response with a RCODE

Ensure that at least one global load balancing pool exists in the configuration before you create a wide IP.
Create a wide IP that provides for configuring a return code (RCODE) to return a response to the client when load balancing fails.
  1. On the Main tab, click DNS > GSLB > Wide IPs .
    The Wide IP List screen opens.
  2. Click Create.
    The New Wide IP List screen opens.
  3. From the General Properties list, select Advanced.
  4. In the Name field, type a name for the wide IP.
    Tip: You can use two different wildcard characters in the wide IP name: asterisk (*) to represent several characters and question mark (?) to represent a single character. This reduces the number of aliases you have to add to the configuration.
  5. From the Type list, select one of these record types for the wide IP:
    Option Description
    NAPTR The Name Authority Pointer record, NAPTR, aids in the standardization of Uniform Resource Names (URNs). NAPTR records map between sets of URNs, URLs and plain domain names, and suggest to clients the protocols available for communication with the mapped resource.
    A The Address record, or A record, lists the IP address for a given host name.
    SRV The Service resource record, SRV, is a pointer with which an alias for a given service is redirected to another domain.
    CNAME The Canonical Name resource record, CNAME, specifies an alias or nickname for the official, or canonical, host name.
    AAAA The IPv6 Address record, or AAAA record, lists the 128-bit IPv6 address for a given host name.
    MX The Mail Exchange resource record, MX, defines the mail system(s) for a given domain.
  6. From the Return Code On Failure list, select Enabled.
  7. From the RCODE list, select one of these options:
    Option Description
    NOERROR (No Error) No error condition.
    FORMERR (Query Format Error) The name server was unable to interpret the query.
    SERVFAIL (Server Failure) The name server was unable to process this query due to a problem with the name server.
    NXDOMAIN (Non Existent Domain) The domain name referenced in the query does not exist.
    NOTIMP (Not Implemented) The name server does not support the requested kind of query.
    REFUSED (Refuse To Answer) The name server refuses to perform the specified operation for policy reasons.
  8. Click Finished.

Implementation result

You now have an implementation in which DNS has a return code (RCODE) configured to return a response to the client when load balancing fails.

Table of Contents | << Previous Chapter | Next Chapter >>
Contact Support Contact Support

Have a Question?

Support and Sales >

About F5

Education

F5 Sites

Support Tasks




©2023 F5 Networks, Inc. All rights reserved.


Trademarks Policies Privacy California Privacy Do Not Sell My Personal Information