F5 Logo MyF5
Search
  1. MyF5 Home
  2. Knowledge Centers
  3. BIG-IP DNS
  4. BIG-IP DNS: Implementations
  5. Integrating BIG-IP LTM Into a Network with BIG-IP DNS Systems
Manual Chapter : Integrating BIG-IP LTM Into a Network with BIG-IP DNS Systems

Applies To:

Show Versions Show Versions

BIG-IP DNS

  • 13.0.1, 13.0.0
Manual Chapter
Table of Contents | << Previous Chapter | Next Chapter >>

Overview: Integrating BIG-IP LTM with BIG-IP DNS systems

You can add BIG-IP® Local Traffic Manager™ (LTM®) systems to a network in which BIG-IP® DNS (formerly GTM™) systems are already present. This expands your load balancing and traffic management capabilities to include the local area network. For this implementation to be successful, you must authorize communications between the LTM and BIG-IP DNS systems. When the LTM and BIG-IP DNS systems use the same version of the big3d agent, you run the bigip_add utility to authorize communications between the systems.

Note: The BIG-IP DNS and BIG-IP LTM systems must have TCP port 4353 open through the firewall between the systems. The BIG-IP systems connect and communicate through this port.

Task summary

To authorize communications between BIG-IP DNS and BIG-IP LTM systems, perform the following tasks on BIG-IP DNS.

Defining a data center

On BIG-IP®DNS, create a data center to contain the servers that reside on a subnet of your network.
  1. On the Main tab, click DNS > GSLB > Data Centers .
    The Data Center List screen opens.
  2. Click Create.
    The New Data Center screen opens.
  3. In the Name field, type a name to identify the data center.
    Important: The data center name is limited to 63 characters.
  4. In the Location field, type the geographic location of the data center.
  5. In the Contact field, type the name of either the administrator or the department that manages the data center.
  6. From the Prober Preference list, select the preferred type of prober(s).
    Option Description
    Inside Data Center By default, select probers inside the data center.
    Outside Data Center Select probers outside the data center.
    Specific Prober Pool Select one of the Probers from the drop-down list. When you want to assign a Prober pool at the data center level.

    Note: Prober pools are not used by the bigip monitor.
  7. From the Prober Fallback list, select the type of prober(s) to use if insufficient numbers of the preferred type are available.
    Option Description
    Any Available By default, select any available prober.
    Inside Data Center Select probers inside the data center.
    Outside Data Center Select probers outside the data center.
    None No fallback probers are selected. Prober fallback is disabled.
    Specific Prober Pool Select one of the Probers from the drop-down list. When you want to assign a Prober pool at the data center level.
  8. From the State list, select Enabled.
  9. Click Finished.
Now you can create server objects and assign them to this data center.
Repeat these steps to create additional data centers.

Defining BIG-IP DNS systems

Ensure that at least one data center exists in the configuration before you start creating a server.
On BIG-IP® DNS, create a server object to represent the BIG-IP DNS system itself.
  1. On the Main tab, click DNS > GSLB > Servers .
    The Server List screen opens.
  2. Click Create.
    The New Server screen opens.
  3. In the Name field, type a name for the server.
    Important: Server names are limited to 63 characters.
  4. From the Product list, select BIG-IP System.
  5. From the Data Center list, select the data center where the server resides.
  6. From the Prober Preference list, select the preferred type of prober(s).
    Option Description
    Inherit From Data Center By default, a server inherits the prober preference selection assigned to the data center in which the server resides.
    Inside Data Center A server selects the probers from inside the data center where the server resides.
    Outside Data Center A server selects the probers from outside the data center where the server resides.
    Specific Prober Pool Select one of the Prober pools from the drop-down list. When assigning the Prober pool at the server level.

    Note: Prober pools are not used by the bigip monitor.
  7. From the Prober Fallback list, select the type of prober(s) to be used if insufficient numbers of the preferred type are available.
    Option Description
    Inherit From Data Center By default, a server inherits the prober fallback selection assigned to the data center in which the server resides.
    Any Available For selecting any available prober.
    Inside Data Center A server selects probers from inside the data center where the server resides.
    Outside Data Center A server selects probers from outside the data center where the server resides.
    None No fallback probers are selected. Prober fallback is disabled.
    Specific Prober Pool Select one of the Probers from the drop-down list. When you want to assign a Prober pool at the server level.
  8. From the State list, select Enabled.
  9. In the BIG-IP System Devices area, click Add to add a device (server).
    1. Type a name in the Device Name field.
    2. Type an external (public) non-floating IP address in the Address field.
    3. If you use NAT, type an internal (private) IP address in the Translation field, and then click Add.
    4. Click Add.
    5. Click OK.
  10. From the Configuration list, select Advanced.
    Additional controls display on the screen.
  11. In the Health Monitors area, assign the bigip monitor to the server by moving it from the Available list to the Selected list.
  12. From the Availability Requirements list, select one of the following and enter any required values.
    Option Description
    All Health Monitors By default, specifies that all of the selected health monitors must be successful before the server is considered up (available).
    At Least The minimum number of selected health monitors that must be successful before the server is considered up.
    Require The minimum number of successful probes required from the total number of probers requested.
  13. From the Virtual Server Discovery list, select how you want virtual servers to be added to the system.
    Option Description
    Disabled The system does not use the discovery feature to automatically add virtual servers. This is the default value. Use this option for a standalone BIG-IP DNS system or for a BIG-IP DNS/LTM® combo system when you plan to manually add virtual servers to the system, or if your network uses multiple route domains.
    Enabled The system uses the discovery feature to automatically add and delete virtual servers. Use this option for a BIG-IP DNS/LTM combo system when you want the BIG-IP DNS system to discover LTM virtual servers.
    Enabled (No Delete) The system uses the discovery feature to automatically add virtual servers and does not delete any virtual servers that already exist in the configuration. Use this option for a BIG-IP DNS/LTM combo system when you want the BIG-IP DNS system to discover LTM virtual servers.
  14. In the Virtual Server List area, if you selected Disabled from the Virtual Server Discovery list, specify the virtual servers that are resources on this server.
    1. In the Name field, type the name of the virtual server.
    2. In the Address field, type the IP address of the virtual server.
    3. From the Service Port list, select the port the server uses.
    4. Click Add.
  15. From the Link Discovery list, select how you want links to be added to the system.
    Option Description
    Disabled The system does not use the discovery feature to automatically add links. This is the default value. Use this option for a standalone BIG-IP DNS system or for a BIG-IP DNS/LTM combo system when you plan to manually add links to the system.
    Enabled The system uses the discovery feature to automatically add and delete links. Use this option for a BIG-IP DNS/LTM combo system when you want BIG-IP DNS to discover links.
    Enabled (No Delete) The system uses the discovery feature to automatically add links and does not delete any links that already exist in the configuration. Use this option for a BIG-IP DNS/LTM combo system when you want BIG-IP DNS to discover links.
  16. Click Finished.
    The Server List screen opens displaying the new server in the list.

Defining BIG-IP LTM systems

On DNS, define servers that represent the LTM® systems in your network.
  1. On the Main tab, click DNS > GSLB > Servers .
    The Server List screen opens.
  2. Click Create.
    The New Server screen opens.
  3. In the Name field, type a name for the server.
    Important: Server names are limited to 63 characters.
  4. From the Product list, select BIG-IP System.
  5. From the Data Center list, select the data center where the server resides.
  6. From the Prober Preference list, select the preferred type of prober(s).
    Option Description
    Inherit From Data Center By default, a server inherits the prober preference selection assigned to the data center in which the server resides.
    Inside Data Center A server selects the probers from inside the data center where the server resides.
    Outside Data Center A server selects the probers from outside the data center where the server resides.
    Specific Prober Pool Select one of the Prober pools from the drop-down list. When assigning the Prober pool at the server level.

    Note: Prober pools are not used by the bigip monitor.
  7. From the Prober Fallback list, select the type of prober(s) to be used if insufficient numbers of the preferred type are available.
    Option Description
    Inherit From Data Center By default, a server inherits the prober fallback selection assigned to the data center in which the server resides.
    Any Available For selecting any available prober.
    Inside Data Center A server selects probers from inside the data center where the server resides.
    Outside Data Center A server selects probers from outside the data center where the server resides.
    None No fallback probers are selected. Prober fallback is disabled.
    Specific Prober Pool Select one of the Probers from the drop-down list. When you want to assign a Prober pool at the server level.
  8. From the State list, select Enabled.
  9. In the BIG-IP System Devices area, click Add to add a device (server).
    1. Type a name in the Device Name field.
    2. Type an external (public) non-floating IP address in the Address field.
    3. If you use NAT, type an internal (private) IP address in the Translation field, and then click Add.
    4. Click Add.
    5. Click OK.
  10. From the Configuration list, select Advanced.
    Additional controls display on the screen.
  11. In the Health Monitors area, assign the bigip monitor to the server by moving it from the Available list to the Selected list.
  12. From the Availability Requirements list, select one of the following and enter any required values.
    Option Description
    All Health Monitors By default, specifies that all of the selected health monitors must be successful before the server is considered up (available).
    At Least The minimum number of selected health monitors that must be successful before the server is considered up.
    Require The minimum number of successful probes required from the total number of probers requested.
  13. From the Virtual Server Discovery list, select how you want virtual servers to be added to the system.
    Option Description
    Disabled The system does not use the discovery feature to automatically add virtual servers. This is the default value. Use this option for a standalone BIG-IP DNS system or for a BIG-IP DNS/LTM® combo system when you plan to manually add virtual servers to the system, or if your network uses multiple route domains.
    Enabled The system uses the discovery feature to automatically add and delete virtual servers. Use this option for a BIG-IP DNS/LTM combo system when you want the BIG-IP DNS system to discover LTM virtual servers.
    Enabled (No Delete) The system uses the discovery feature to automatically add virtual servers and does not delete any virtual servers that already exist in the configuration. Use this option for a BIG-IP DNS/LTM combo system when you want the BIG-IP DNS system to discover LTM virtual servers.
  14. In the Virtual Server List area, if you selected Disabled from the Virtual Server Discovery list, specify the virtual servers that are resources on this server.
    1. In the Name field, type the name of the virtual server.
    2. In the Address field, type the IP address of the virtual server.
    3. From the Service Port list, select the port the server uses.
    4. Click Add.
  15. From the Link Discovery list, select how you want links to be added to the system.
    Option Description
    Disabled The system does not use the discovery feature to automatically add links. This is the default value. Use this option for a standalone BIG-IP DNS system or for a BIG-IP DNS/LTM combo system when you plan to manually add links to the system.
    Enabled The system uses the discovery feature to automatically add and delete links. Use this option for a BIG-IP DNS/LTM combo system when you want BIG-IP DNS to discover links.
    Enabled (No Delete) The system uses the discovery feature to automatically add links and does not delete any links that already exist in the configuration. Use this option for a BIG-IP DNS/LTM combo system when you want BIG-IP DNS to discover links.
  16. Click Finished.
    The Server List screen opens displaying the new server in the list.
  17. In the Server List screen, select the name of the new server.
  18. Select the Virtual Servers tab.
  19. From the Virtual Servers list, select the name of a virtual server previously created.
    A Virtual Server list screen opens.
  20. From the Configuration list, select Advanced.
    Additional controls display on the screen.
  21. In the Health Monitors area, assign the bigip monitor to the server by moving it from the Available list to the Selected list.
  22. Click Update.

Running the bigip_add script

You must determine the self IP addresses of the LTM® systems that you want to communicate with BIG-IP® DNS before you start this task.
You run the bigip_add script on the BIG-IP DNS system you are installing on a network that includes other BIG-IP® systems of the same version. This script exchanges SSL certificates so that each system is authorized to communicate with the other. For additional information about running the script, see K13312 on AskF5.com (www.askf5.com).
Note: The BIG-IP DNS and BIG-IP LTM systems must have TCP port 22 open for the script to work. You must perform this task from the command-line interface.
  1. Log in as root to the BIG-IP DNS system you are installing on your network.
  2. Run this command to access tmsh.
    tmsh
  3. Run this command to run the bigip_add utility:
    run gtm bigip_add <IP_addresses_of_BIG-IP_LTM_systems>
    The utility exchanges SSL certificates so that each system is authorized to communicate with the other.
The specified BIG-IP systems can now communicate with BIG-IP DNS.

Implementation result

You now have an implementation in which the BIG-IP® systems can communicate with each other. BIG-IP DNS can now use the other BIG-IP systems when load balancing DNS queries, and can acquire statistics and status information for the virtual servers the other BIG-IP systems manage.

Table of Contents | << Previous Chapter | Next Chapter >>
Contact Support Contact Support

Have a Question?

Support and Sales >

About F5

Education

F5 Sites

Support Tasks




©2023 F5 Networks, Inc. All rights reserved.


Trademarks Policies Privacy California Privacy Do Not Sell My Personal Information