Applies To:
Show VersionsBIG-IP AAM
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
BIG-IP APM
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
BIG-IP GTM
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
BIG-IP Link Controller
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
BIG-IP Analytics
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
BIG-IP LTM
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
BIG-IP AFM
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
BIG-IP PEM
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
BIG-IP ASM
- 11.5.10, 11.5.9, 11.5.8, 11.5.7, 11.5.6, 11.5.5, 11.5.4, 11.5.3, 11.5.2, 11.5.1
Web Hosting Multiple Customers Using Untagged Interfaces
Overview: Web hosting multiple customers using untagged interfaces
One way to implement web hosting for multiple customers is to use multiple interfaces on the BIG-IP® system to directly host traffic for multiple customers, without the need for an external switch. With this scenario, you must configure the VLANs with untagged instead of tagged interfaces. As shown in the following illustration, two BIG-IP system interfaces are assigned to each VLAN. For example, interfaces 1.1 and 1.2 are assigned to VLAN vlanA. Each interface is assigned to a VLAN as an untagged interface.
Illustration for hosting multiple customers using untagged interfaces
Hosting multiple customers using untagged interfaces
Task summary for hosting multiple customers
Perform these tasks to host multiple customers using tagged interfaces on VLANs.