Applies To:
Show VersionsBIG-IQ Centralized Management
- 5.0.0
How do I manage software for BIG-IP devices?
A key feature of BIG-IQ® is the ability to manage software images for multiple remote devices from one location. You can deploy software without having to log in to each individual BIG-IP® device.
There are three steps to managing software images for devices:
- Download the software image from F5 Networks.
- Upload the software image to BIG-IQ.
- Install the software image on a device in the BIG-IP Device inventory in one of the
following two ways:
- Managed Device Upgrade - use this process for installing a software image on managed BIG-IP devices running version 11.5.0 or later.
- Legacy Device Upgrade - use this process for installing a software image on BIG-IP devices running versions 10.2.4 to 11.4.1.
Downloading a software image from F5 Networks
Downloading a software image from F5 Networks is the first step to making it available to install on a managed device.
Uploading a software image to BIG-IQ
You upload a software image to make it available to deploy to managed BIG-IP® devices.
Installing a software image onto a managed device
Before you can install a software image onto a device, you must download it from the F5 Downloads site, https://downloads.f5.com, and upload it to the BIG-IQ® system. To apply a hotfix, you must have the base software image (as well as the hotfix) uploaded to, and verified by, BIG-IQ.
Install software images to your managed devices so the versions are up to date, and in sync. This helps you manage your network traffic more efficiently. When you install software images from BIG-IQ, you have the option to stage the software installation for deploying later, as well as the option to have the installation paused after the software image is copied to the device and before the device reboots. While the software installs on the BIG-IP devices, you can continue doing other tasks on the BIG-IQ system.
- Log in to the BIG-IQ® system with your user name and password.
- At the top left of the screen, select Device Management from the BIG-IQ menu.
- At the top of the screen, click Operations.
- On the left, click .
- Select the check box next to the software image you want to install and then click the Managed Device Install button at the top of the screen.
- In the Name field, type a name to identify this installation.
-
For the Options setting, you can select any of the
following:
- If you want to copy the image to the device, but wait until later
install it, select the check box next to :
Pause after the software image is copied has been copied to devices.
- If you want to wait to reboot the image to the new volume so you can
verify the software installation, select the check box next
to:
Pause for reboot confirmation.
- If you want to copy the image to the device, but wait until later
install it, select the check box next to :
- Click the Add/Remove Devices button to select devices to install this software on.
- From the Available list, select the devices you want to upgrade and click -> to move it to the Selected list.
- When you're done adding devices to the Selected list, click the Apply button.
- To set the location for where BIG-IQ installs this software image, select Target Volume.
- To assign a new location to install the software image, select New Volume and type the volume and partition you want it installed.
-
If you want to set the target volume for all the BIG-IP devices you are
upgrading, click the Set Default Volume button and select
an option:
- Install at the next available volume to install the software there.
- Volume Name and type a new volume install the software there.
- Click the Run button to start the installation immediately, or click the Save button to save this job for deploying at a later time.
If you selected an option save the deployment or to pause the process at certain points, click the name of the software installation on the Software Installation list, and click the Continue button when you're ready to continue the software installation.
How do I upgrade the BIG-IP REST framework so I can manage it from BIG-IQ?
To properly communicate, BIG-IQ® and BIG-IP® devices must be running compatible versions of the REST framework. If the REST frameworks are incompatible, BIG-IQ displays a yellow triangle next to the device in the BIG-IP Device inventory.
When you upgrade a BIG-IP® device running version 11.5.x to another 11.5.x version, or to an 11.6.x version (for example, from version 11.5.3 to 11.5.4, or from version 11.5.3 to version 11.6.1), you must upgrade the REST framework so BIG-IQ can manage the device. If you upgraded BIG-IQ from version 4.6.0 to version 5.0, you must also upgrade the REST framework for all BIG-IP devices (not running version 12.0.0) currently in the BIG-IP Device inventory.
Upgrading a legacy device (version 10.2.0 - 11.4.1)
A BIG-IP® device running versions 10.2.0 - 11.4.1 is considered a legacy device. You must upgrade a legacy device to version 11.5.0 or later before you can add it to the BIG-IP Device Inventory and start managing it from BIG-IQ.
If you were managing a device running versions 10.2.0 - 11.4.1 from a previous version of BIG-IQ, and upgraded to version 5.0, the device displays as impaired with a yellow triangle next to it in the BIG-IP Devices Inventory. To manage the legacy device, you must upgrade it to 11.5.0 or later.
- Log in to the BIG-IQ® system with your user name and password.
- At the top left of the screen, select Device Management from the BIG-IQ menu.
- At the top of the screen, click Operations.
- On the left, click .
- In the Software Images list, select the check box next to the image you want to install and click Legacy Device Install button at the top of the screen
- In the Device IP Address field, type the IP address for the legacy device that you want to upgrade.
- In the Admin User Name and Admin Password fields, type the administrator's user name and password for this device.
- In the Root User Name and Root Password fields, type the user name and password for the root user for this device.
- Click the Upgrade button to start the upgrade.