Applies To:Show Versions
BIG-IQ Centralized Management
How do I start viewing BIG-IP device statistics from BIG-IQ?
To start viewing statistics for a BIG-IP® device, you must enable statistics collection for that device. You can do that either during or after adding the device to the BIG-IP Devices inventory list on the BIG-IQ® system. You also need to install, configure, and add a data collection device before you can view device statistics.
Enabling statistics collection during device discovery
Before you can enable statistics for BIG-IP® devices:
- There must be a BIG-IQ® data collection device configured for the BIG-IQ device.
- The BIG-IP device must be located in your network and running a compatible software version. Refer to https://support.f5.com/kb/en-us/solutions/public/14000/500/sol14592.html for more information.
- Port 22 and 443 must be open to the BIG-IQ management address, or any alternative IP address used to add the BIG-IP device to the BIG-IQ inventory. These ports and the management IP address are open by default on BIG-IQ.
If you are running BIG-IP version 11.5.1 up to version 11.6.0, you might need root user credentials to discover and add the device to the BIG-IP devices inventory. You don't need root user credentials for BIG-IP devices running versions 11.6.1 - 12.x.
- At the top of the screen, click Devices.
- Click the Add Device button.
- In the IP Address field, type the IPv4 or IPv6 address of the device.
- In the User Name and Password fields, type the user name and password for the device.
If this device is part of a DSC pair, for the Cluster Display
Name setting, specify how to handle it:
For BIG-IQ to properly associate the two devices in the same DSC group, the Cluster Display Name must be the same for both members in a group.There can be only two members in a DSC group.
- For an existing DSC pair, select Use Existing from the list, and then select the name of your DSC group from the next list.
- To create a new DSC pair, select Create New from the list, and type a name in the field.
If this device is configured in a DSC pair, for the Deployment
Settings, specify how to handle it:
- Initiate BIG-IP DSC sync when deploying configuration changes (Recommended): Select this option if this device is part of a DSC pair and you want this device to automatically synchronize configuration changes with the other member in the DSC group.
- Ignore BIG-IP DSC sync when deploying configuration changes: Select this option if you want to manually synchronize configurations changes between the two members in the DSC group.
Click the Add button at the bottom of the screen.
The BIG-IQ system opens communication to the BIG-IP device, and checks the BIG-IP device framework.Note: The BIG-IQ system can properly manage a BIG-IP device only if the BIG-IP device is running a compatible version of the REST framework.
- If a framework upgrade is required, in the popup window, in the Root User Name and Root Password fields, type the root user name and password for the BIG-IP device, and click Continue.
If in addition to basic management tasks (like software upgrades, license
management, and UCS backups) you also want to centrally manage this device's
configurations for licensed services, select the check box next to each service
you want to discover.
You can also select these service configuration after you add the BIG-IP device to the inventory.
To enable statistics collection for this BIG-IP device, under Statistics
monitoring, select the check box next to each service you want to collect
statistics for, and then click Continue.
Note: If you want to enable statistics collection without managing any services, just clear the check boxes for all services.
- Click the Add button at the bottom of the screen.
Enable statistics collection for devices
- The device must already be in the BIG-IQ system inventory.
- There must be a BIG-IQ data collection device configured for the BIG-IQ device.
- At the top of the screen, click Devices.
- Click the name of the device you want to enable statistics collection for.
- On the left, click Statistics Collection.
- To begin statistics collection, for Collect Statistics Data, select Enabled.
- For Modules/Services, click the check box for the types of statistics you want to collect.
- For Frequency, next to Collect every, select the interval at which you want to collect statistics from this device.
Manage the retention policy for your statistics data
- The number of BIG-IP® devices you manage
- The number of objects on the BIG-IP devices you manage (for example, virtual servers, pools, pool members, and iRules®)
- The frequency of statistics collection
- The data retention policy
- The data replication policy
|How long is data in each container retained?||Data is retained in each container for the time period you specify. When the specified level is reached, the oldest chunk of data is deleted. For example, if you specify a raw data value of 48 hours, then when 48 hours of raw data accumulate, the next hour of incoming raw data causes the oldest hour to be deleted.|
|When does data from one container pass on to the next?||Data passes from one container to the next in increments that are the size of the next (larger) container. That is, every 60 minutes, the last 60 minutes of raw data is aggregated into a data set and passed to the Hour(s) container. Every 24 hours, the last 24 hours of hourly data is aggregated into a data set and passed to the Day(s) container, and so on for the Month(s) container.|
|What about limits?||
Limit Max Storage to specifies the
percentage of total disk space that you want data to consume on the
data collection devices in your cluster.
If more disk space is consumed than the percentage you specified, BIG-IQ takes two actions:
At the top of the screen, click System, and then, on the
left, click BIG-IQ DATA COLLECTION and select
BIG-IQ Data Collection Cluster.
- Under Summary, you can view information detailing how much data is stored, as well as how the data is stored.
- Under Configuration, you can access the screens that control DCD cluster performance.
On the left, click
.The Statistics Collection Status screen displays the percentage of available disk space currently consumed by statistics data for each container.
To change the retention settings for your statistics data, click
The Statistics Retention Policy screen opens.
In the Keep real-time (raw) data up to field, type the
number of hours of raw data to retain.
You must specify a minimum of 1 hour, so that there is sufficient data to average and create a data point for the Keep hourly data up to container.
In the Keep hourly data up to field, type the number of
hourly data points to retain.
You must specify a minimum of 24 hours, so that there is sufficient data to average and create a data point for the Keep daily data up to container.
In the Keep daily data up to field, type the number of
daily data points to retain.
You must specify a minimum of 31 days, so that there is sufficient data to average and create a data point for the Keep monthly data up to container.
In the Keep monthly data up to field, type the number of
monthly data points to retain.
Once the specified number of months passes, the oldest monthly data set is deleted.
- In the Limit max storage to field, type the percentage of disk space that you want collected data to consume before the oldest monthly data set is deleted.
Expand Advanced Settings, and then select the Enable
Replicas check box.
Replicas are copies of a data set that are available to the DCD cluster when one or more devices within that cluster become unavailable. By default, data replication for statistics is not enabled. Disabling replication reduces the amount of disk space required for data retention. However, this provides no protection from data corruption that can occur when you remove a data collection device. You should enable replicas to provide this protection.
- When you are satisfied with the values specified for data retention, click Save & Close.