Manual Chapter : Active Directory Query

Applies To:

Show Versions Show Versions

BIG-IP APM

  • 15.1.2, 15.1.1, 15.1.0
Manual Chapter

Active Directory Query

About Active Directory queries

When running the AD Query access policy item, Access Policy Manager (APM®) queries an external Active Directory server for additional information about the user. The AD Query item looks up the attribute memberOf to fetch the groups to which a user belongs and provides an additional option to fetch the primary group.
The AD Query item does not authenticate user credentials. To authenticate users, use another or an additional authentication item in the access policy.

About nested groups in Active Directory queries

A
nested group
is a group that is a member of another group. For example, group1 is a member of group3 and group4. A user, user1, that belongs to group1 and group2 also belongs to group3 and group4 through nesting.

Whether AD Query returnd nested groups in session variables

The AD Query access policy item returns and stores the groups to which a user belongs in the
memberOf
session variable.
The contents of the
memberOf
session variable differ depending on whether the
Fetch Nested Group
setting is enabled or disabled in AD Query properties:
  • Enabled - The
    memberOf
    session variable contains all groups to which the user belongs. As in the example, this includes group1, group2, group3, and group4.
  • Disabled - The
    memberOf
    session variable contains groups to which the user belongs directly. Based on the example, this would be group1 and group2.

About Active Directory password management

Access Policy Manager (APM®) supports password management for Active Directory authentication.

How APM supports password reset

The process works in this sequence:
  • Access Policy Manager uses the client's user name and password to authenticate against the Active Directory server on behalf of the client.
  • If the user password on the Active Directory server has expired, Access Policy Manager returns a new logon screen back to the user, requesting that the user change the password.
  • After the user submits the new password, Access Policy Manager attempts to change the password on the Active Directory server. If this is successful, the user's authentication is validated.
If the password change fails, it is likely that the Active Directory server rejected it because the password did not meet the minimum requirements such as password length.

Number of attempts APM provides for password reset

In the AD Auth action, APM provides a
Max Password Reset Attempts Allowed
property.

Change password option

In the Logon page action, APM provides a Checkbox property in the visual policy editor. You can add the option on the APM logon screen to change the log on password.

About how APM handles binary values in Active Directory attributes

For Active Directory, Access Policy Manager (APM) converts an attribute value to hex only if the value contains unprintable characters. If the session variable contains several values, and one or more of those values is unprintable, then APM converts only those particular values to hex.
An attribute with a single unprintable value
7ecc84a2.session.ad.last.attr.objectSid 58 / 0x01050000000000051500000013fe8e97c03cd5b5ad04e2e255040000
Attributes with multiple values, both printable and unprintable (binary)
7ecc84a2.session.ad.last.attr.memberOf 460 | CN=printable group,OU=groups,OU=someco,DC=sherwood,DC=labt,DC=fp,DC=somelabnet,DC=com | 0x434e3d756e7072696e7461626c6520c2bdc2a12067726f75702c4f553d67726f7570732c4f553d66352 | / c44433d73686572776f6f642c44433d6c6162742c44433d66702c44433d66356e65742c44433d636f6d | / CN=Domain Users,CN=Users,DC=smith,DC=labt,DC=fp,DC=somlabnet,DC=com | / CN=CERTSVC_DCOM_ACCESS,CN=Users,DC=smith,DC=labt,DC=fp,DC=somelabnet,DC=com | / CN=Users,CN=Builtin,DC=smith,DC=labt,DC=fp,DC=somelabnet,DC=com |

Adding an Active Directory query to an access policy

Before you add an AD query to an access policy, you must have at least one AD AAA server configured. You should also have an access policy that is configured with actions to authenticate the user.
You add an AD query to an access policy to get information about a user; for example, you might want to know whether a user is a member of a group before granting access to particular resources. Access Policy Manager (APM) stores the attributes it retrieves in session variables.
  1. On the Main tab, click
    Access
    Profiles / Policies
    .
    The Access Profiles (Per-Session Policies) screen opens.
  2. In the Per-Session Policy column, click the
    Edit
    link for the access profile you want to configure.
    The visual policy editor opens the access policy in a separate screen.
  3. Click the
    (+)
    icon anywhere in the access policy to add a new item.
    Only an applicable subset of access policy items is available for selection in the visual policy editor for any access profile type.
    A popup screen opens, listing predefined actions on tabs such as General Purpose, Authentication, and so on.
  4. On the Authentication tab, select
    AD Query
    and click
    Add Item
    .
    A Properties popup screen opens.
  5. From the
    Server
    list, select the Active Directory AAA server to query.
  6. You can also set these options.
    Option
    Description
    SearchFilter
    Type a search filter. (Otherwise if left empty, the policy uses the default filter, sAMAccountName=%{
    session.logon.last.username
    }. As a result, the
    SearchFilter
    parameter is populated with the Subject Alternative Name from the current Active Directory session.)
    Fetch Primary Group
    Enable this setting to populate the user's primary group in the session variables. This setting is optional.
    Cross Domain Support
    Specifies whether AD cross domain authentication support is enabled for AD Auth agent. This setting is optional.
    Fetch Nested Groups
    Enable to populate the
    memberOf
    session variable with user's membership in nested groups in addition to the groups to which the user belongs directly.
    Access Policy Manager does not query for the primary group and add it to the
    memberOf
    attribute. You must manually look up the attribute
    memberOf
    as well as the primary group.
    Complexity Check for Password Reset
    Enable this setting so that APM performs the password policy checks it supports.
    Max Password Reset Attempts Allowed
    Select the number of times to allow a user to try to reset their password.
    Prompt user to change password before expiration
    Set (N days) to prompt user to change the password before it expires. The default is
    none
    (disabled). This setting is optional.
  7. Click
    Save
    .
  8. Click
    Apply Access Policy
    to save your configuration.
This adds an Active Directory query to the access policy.

Verify log settings for the access profile

Confirm that the correct log settings are selected for the access profile to ensure that events are logged as you intend.
Log settings are configured in the
Access
Overview
Event Log
Settings
area of the product. They enable and disable logging for access system and URL request filtering events. Log settings also specify log publishers that send log messages to specified destinations.
  1. On the Main tab, click
    Access
    Profiles / Policies
    .
    The Access Profiles (Per-Session Policies) screen opens.
  2. Click the name of the access profile that you want to edit.
    The properties screen opens.
  3. On the menu bar, click
    Logs
    .
    The access profile log settings display.
  4. Move log settings between the
    Available
    and
    Selected
    lists.
    You can assign up to three log settings that enable access system logging to an access profile. You can assign additional log settings to an access profile provided that they enable logging for URl request logging only.
    Logging is disabled when the
    Selected
    list is empty.
  5. Click
    Update
    .
An access profile is in effect when it is assigned to a virtual server.

Using AD query with IPv6

When you configure an AD AAA server with an IPv6 address in the Domain Controller setting, an AD query does not work. However, we tested AD query with an IPv6 address using this approach.
  1. In the AD server configuration, use the host name of the DC in the Domain Controller setting.
    apm aaa active-directory /Common/AD-IPv6 { admin-encrypted-password ".(.5(lEhJfN\\<^FaLGC0Bt8CG0KMfR\\9;coEKdIm=5@32II" admin-name Administrator domain enterprise.lab.fp.mynet.com domain-controller win2008.enterprise.lab.fp.mynet.com
    The host name is win2008.enterprise.lab.fp.mynet.com in the example.
  2. Update the system's global setting to include a remote host entry for the DC host name that was used in step 1 and map it to an IPv4 address as shown in this example.
    sys global-settings { gui-setup disabled hostname bigip2mgmt.lab.fp.mynet.com mgmt-dhcp disabled remote-host { /Common/abc { addr 165.160.15.20 hostname win2008.enterprise.lab.fp.mynet.com } } }
  3. Create a pool with the DC IPv6 address as a member as shown in this example.
    ltm pool /Common/AD-IPv6-Pool { members { /Common/fd00:ffff:ffff:fff1:912e:cdfe:c884:2607.any { address fd00:ffff:ffff:fff1:912e:cdfe:c884:2607 } } }
  4. Create a wildcard TCP virtual server with these settings:
    1. Set the
      Destination IP
      settings to the IPv4 address that was used in step 2.
      That address is 172.31.54.99 in the example.
    2. For the
      Service Port
      setting, select
      * All ports
      .
    3. In the Configuration area, leave the
      Protocol
      setting at the default,
      TCP
      .
    4. Scroll down to the
      Source Address Translation
      setting and select
      Auto Map
      .
    5. Scroll down to the Resources area and select the pool that you configured previously from the
      Default Pool
      list.
    ltm virtual /Common/bigip2.lab.fp.mynet.com-tcp { destination /Common/172.31.54.99:any ip-protocol tcp mask 255.255.255.255 pool /Common/AD-IPv6-Pool profiles { /Common/tcp { } } source-address-translation automap translate-port disabled vlans-disabled }
  5. Create another similar virtual server, but for UDP traffic. (Set the Protocol setting in the virtual server configuration to UDP).
    ltm virtual /Common/bigip2.lab.fp.mynet.com-udp { destination /Common/172.31.54.99:any ip-protocol udp mask 255.255.255.255 pool /Common/AD-IPv6-Pool profiles { /Common/udp { } } source-address-translation automap translate-port disabled vlans-disabled }

Active Directory query session variables

When the AD Query access policy item runs, it populates session variables which are then available for use in access policy rules. The tables list the session variables for the Active Directory access policy items and for a logon access policy item.

Session variables for Active Directory query

Session Variable
Description
session.ad.last.queryresult
Provides the result of the Active Directory query. The available values are:
  • 0: Failed
  • 1: Passed
session.ad.last.errmsg
Displays the error message for the last login. If
session.ad.last.queryresult
is set to 0, then
session.ad.last.errmsg
might be useful for troubleshooting purposes.
session.ad.last.attr.$attr_name
$attr_name
is a value that represents the user’s attributes received from the Active Directory. Each attribute is converted to separate session variables.
session.ad.last.attr.primarygroup.$attr_name
primarygroup.$attr_name
is a value that represents the user’s group attributes received from the Active Directory. Each attribute is converted to separate session variables.

Common session variables

Session Variable
Description
session.logon.last.username
Provides user credentials. The
username
string is stored after encrypting, using the system's client key.
session.logon.last.password
Provides user credentials. The
password
string is stored after encrypting, using the system's client key.

Active Directory authentication and query troubleshooting tips

You might run into problems with Active Directory authentication and query processes in some instances. Follow these tips to try to resolve any issues you might encounter.

Active Directory auth authentication and query troubleshooting

Possible error messages
Possible explanations and corrective actions
Domain controller reply did not match expectations.(-1765328237)
This error occurs when the principal/domain name does not match the domain controller server's database. For example, if the actual domain is
SALES.MYCOMPANY.COM
, and the administrator specifies
STRESS
as the domain, then the
krb5.conf
file displays the following:
default_realm = SALES SALES = { domain controller = (domain controller server) admin = (admin server)
So, when the administrator tries to authenticate with
useraccount@SALES
, the krb5 library notices that the principal name
SALES
differs from the actual one in the server database.

Additional troubleshooting tips for Active Directory authentication

You should
Steps to take
Check that your access policy is attempting to perform authentication
  • Refer to the message boxes in your access policy to display information on what the access policy is attempting to do.
  • Refer to
    /var/log/apm
    to view authentication attempts by the access policy.
Make sure that your log level is set to the appropriate level. The default log level is
notice
.
Confirm network connectivity
  • Access Access Policy Manager (APM) through the command line interface and check your connectivity by pinging the Active Directory server using the host entry in the AAA Server box.
  • Confirm that the Active Directory port (
    88
    or
    389
    ) is not blocked between APM, and the Active Directory server.
Check the Active Directory server configuration
  • Confirm that the Active Directory server name can be resolved to the correct IP address, and that the reverse name resolution (IP address to name) is also possible.
  • Confirm that the Active Directory server and the BIG-IP system have the correct time setting configured.
Since Active Directory is sensitive to time settings, use NTP to set the correct time on the BIG-IP system.
Capture a tcpdump
Use the tcpdump utility on the BIG-IP system to record activities between Access Policy Manager and the authentication server when authentication attempts are made.
  1. Type a command to start the tcpdump utility. For example, type
    tcpdump -s0 -i
    1.1
    -w
    /var/tmp/ad-test.pcap
    host
    10.10.10.10
    where
    1.1
    is an interface number,
    /var/tmp/ad-test.pcap
    is the path and filename for an output binary file, and
    10.10.10.10
    is the IP address for the authentication server.
    For tcpdump utility syntax, refer to SOL411: Overview of packet tracing with the tcpdump utility on the AskF5 web site located at
    support.f5.com
    .
  2. Run the authentication test.
  3. After authentication fails, stop the tcpdump utility, download the result to a client system, and use an analyzer to troubleshoot.
If you decide to escalate the issue to customer support, you must provide a capture of the tcpdump when you encounter authentication issues that you cannot otherwise resolve on your own.